summaryrefslogtreecommitdiffstats
path: root/drivers/pci/controller/pci-aardvark.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-10-22 12:41:00 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2020-10-22 12:41:00 -0700
commit00937f36b09e89c74e4a059dbb8acbf4b971d5eb (patch)
treeff2e5f5fa6736460437f57680405a20124d1e969 /drivers/pci/controller/pci-aardvark.c
parent96485e4462604744d66bf4301557d996d80b85eb (diff)
parent28e34e751f6c50098d9bcecb30c97634b6126730 (diff)
downloadlinux-stable-00937f36b09e89c74e4a059dbb8acbf4b971d5eb.tar.gz
linux-stable-00937f36b09e89c74e4a059dbb8acbf4b971d5eb.tar.bz2
linux-stable-00937f36b09e89c74e4a059dbb8acbf4b971d5eb.zip
Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
Diffstat (limited to 'drivers/pci/controller/pci-aardvark.c')
-rw-r--r--drivers/pci/controller/pci-aardvark.c108
1 files changed, 69 insertions, 39 deletions
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 1559f79e63b6..0be485a25327 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -9,11 +9,12 @@
*/
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/phy/phy.h>
@@ -251,6 +252,25 @@ static void advk_pcie_wait_for_retrain(struct advk_pcie *pcie)
}
}
+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
+{
+ u32 reg;
+
+ if (!pcie->reset_gpio)
+ return;
+
+ /* PERST does not work for some cards when link training is enabled */
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
+ reg &= ~LINK_TRAINING_EN;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+
+ /* 10ms delay is needed for some cards */
+ dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
+ gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+}
+
static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
{
int ret, neg_gen;
@@ -299,6 +319,21 @@ static void advk_pcie_train_link(struct advk_pcie *pcie)
int neg_gen = -1, gen;
/*
+ * Reset PCIe card via PERST# signal. Some cards are not detected
+ * during link training when they are in some non-initial state.
+ */
+ advk_pcie_issue_perst(pcie);
+
+ /*
+ * PERST# signal could have been asserted by pinctrl subsystem before
+ * probe() callback has been called or issued explicitly by reset gpio
+ * function advk_pcie_issue_perst(), making the endpoint going into
+ * fundamental reset. As required by PCI Express spec a delay for at
+ * least 100ms after such a reset before link training is needed.
+ */
+ msleep(PCI_PM_D3COLD_WAIT);
+
+ /*
* Try link training at link gen specified by device tree property
* 'max-link-speed'. If this fails, iteratively train at lower gen.
*/
@@ -330,31 +365,10 @@ err:
dev_err(dev, "link never came up\n");
}
-static void advk_pcie_issue_perst(struct advk_pcie *pcie)
-{
- u32 reg;
-
- if (!pcie->reset_gpio)
- return;
-
- /* PERST does not work for some cards when link training is enabled */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~LINK_TRAINING_EN;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
- /* 10ms delay is needed for some cards */
- dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
- gpiod_set_value_cansleep(pcie->reset_gpio, 1);
- usleep_range(10000, 11000);
- gpiod_set_value_cansleep(pcie->reset_gpio, 0);
-}
-
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
- advk_pcie_issue_perst(pcie);
-
/* Enable TX */
reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
@@ -431,15 +445,6 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
reg |= PIO_CTRL_ADDR_WIN_DISABLE;
advk_writel(pcie, reg, PIO_CTRL);
- /*
- * PERST# signal could have been asserted by pinctrl subsystem before
- * probe() callback has been called or issued explicitly by reset gpio
- * function advk_pcie_issue_perst(), making the endpoint going into
- * fundamental reset. As required by PCI Express spec a delay for at
- * least 100ms after such a reset before link training is needed.
- */
- msleep(PCI_PM_D3COLD_WAIT);
-
advk_pcie_train_link(pcie);
/*
@@ -607,7 +612,7 @@ static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
* Initialize the configuration space of the PCI-to-PCI bridge
* associated with the given PCIe interface.
*/
-static void advk_sw_pci_bridge_init(struct advk_pcie *pcie)
+static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
{
struct pci_bridge_emul *bridge = &pcie->bridge;
@@ -633,8 +638,7 @@ static void advk_sw_pci_bridge_init(struct advk_pcie *pcie)
bridge->data = pcie;
bridge->ops = &advk_pci_bridge_emul_ops;
- pci_bridge_emul_init(bridge, 0);
-
+ return pci_bridge_emul_init(bridge, 0);
}
static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
@@ -1077,7 +1081,9 @@ static int advk_pcie_enable_phy(struct advk_pcie *pcie)
}
ret = phy_power_on(pcie->phy);
- if (ret) {
+ if (ret == -EOPNOTSUPP) {
+ dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n");
+ } else if (ret) {
phy_exit(pcie->phy);
return ret;
}
@@ -1122,6 +1128,7 @@ static int advk_pcie_probe(struct platform_device *pdev)
pcie = pci_host_bridge_priv(bridge);
pcie->pdev = pdev;
+ platform_set_drvdata(pdev, pcie);
pcie->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pcie->base))
@@ -1167,7 +1174,11 @@ static int advk_pcie_probe(struct platform_device *pdev)
advk_pcie_setup_hw(pcie);
- advk_sw_pci_bridge_init(pcie);
+ ret = advk_sw_pci_bridge_init(pcie);
+ if (ret) {
+ dev_err(dev, "Failed to register emulated root PCI bridge\n");
+ return ret;
+ }
ret = advk_pcie_init_irq_domain(pcie);
if (ret) {
@@ -1195,18 +1206,37 @@ static int advk_pcie_probe(struct platform_device *pdev)
return 0;
}
+static int advk_pcie_remove(struct platform_device *pdev)
+{
+ struct advk_pcie *pcie = platform_get_drvdata(pdev);
+ struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
+
+ pci_lock_rescan_remove();
+ pci_stop_root_bus(bridge->bus);
+ pci_remove_root_bus(bridge->bus);
+ pci_unlock_rescan_remove();
+
+ advk_pcie_remove_msi_irq_domain(pcie);
+ advk_pcie_remove_irq_domain(pcie);
+
+ return 0;
+}
+
static const struct of_device_id advk_pcie_of_match_table[] = {
{ .compatible = "marvell,armada-3700-pcie", },
{},
};
+MODULE_DEVICE_TABLE(of, advk_pcie_of_match_table);
static struct platform_driver advk_pcie_driver = {
.driver = {
.name = "advk-pcie",
.of_match_table = advk_pcie_of_match_table,
- /* Driver unloading/unbinding currently not supported */
- .suppress_bind_attrs = true,
},
.probe = advk_pcie_probe,
+ .remove = advk_pcie_remove,
};
-builtin_platform_driver(advk_pcie_driver);
+module_platform_driver(advk_pcie_driver);
+
+MODULE_DESCRIPTION("Aardvark PCIe controller");
+MODULE_LICENSE("GPL v2");