pcmcia: remove unused pxa/sa1100 drivers

A number of boards got removed, so this code is now orphaned.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 155 deletions

diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
deleted file mode 100644
index f1b5160cb8fa..000000000000
--- a/drivers/pcmcia/sa1111_lubbock.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_lubbock.c
- *
- * Author:	George Davis
- * Created:	Jan 10, 2002
- * Copyright:	MontaVista Software Inc.
- *
- * Originally based upon linux/drivers/pcmcia/sa1100_neponset.c
- *
- * Lubbock PCMCIA specific routines.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/hardware/sa1111.h>
-#include <asm/mach-types.h>
-
-#include "sa1111_generic.h"
-#include "max1600.h"
-
-static int lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	struct max1600 *m;
-	int ret;
-
-	ret = max1600_init(skt->socket.dev.parent, &m,
-			   skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A,
-			   MAX1600_CODE_HIGH);
-	if (ret == 0)
-		skt->driver_data = m;
-
-	return ret;
-}
-
-static int
-lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	struct max1600 *m = skt->driver_data;
-	int ret = 0;
-
-	/* Lubbock uses the Maxim MAX1602, with the following connections:
-	 *
-	 * Socket 0 (PCMCIA):
-	 *	MAX1602	Lubbock		Register
-	 *	Pin	Signal
-	 *	-----	-------		----------------------
-	 *	A0VPP	S0_PWR0		SA-1111 GPIO A<0>
-	 *	A1VPP	S0_PWR1		SA-1111 GPIO A<1>
-	 *	A0VCC	S0_PWR2		SA-1111 GPIO A<2>
-	 *	A1VCC	S0_PWR3		SA-1111 GPIO A<3>
-	 *	VX	VCC
-	 *	VY	+3.3V
-	 *	12IN	+12V
-	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-	 *
-	 * Socket 1 (CF):
-	 *	MAX1602	Lubbock		Register
-	 *	Pin	Signal
-	 *	-----	-------		----------------------
-	 *	A0VPP	GND		VPP is not connected
-	 *	A1VPP	GND		VPP is not connected
-	 *	A0VCC	S1_PWR0		MISC_WR<14>
-	 *	A1VCC	S1_PWR1		MISC_WR<15>
-	 *	VX	VCC
-	 *	VY	+3.3V
-	 *	12IN	GND		VPP is not connected
-	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
-	 *
-	 */
-
- again:
-	switch (skt->nr) {
-	case 0:
-	case 1:
-		break;
-
-	default:
-		ret = -1;
-	}
-
-	if (ret == 0)
-		ret = sa1111_pcmcia_configure_socket(skt, state);
-	if (ret == 0)
-		ret = max1600_configure(m, state->Vcc, state->Vpp);
-
-#if 1
-	if (ret == 0 && state->Vcc == 33) {
-		struct pcmcia_state new_state;
-
-		/*
-		 * HACK ALERT:
-		 * We can't sense the voltage properly on Lubbock before
-		 * actually applying some power to the socket (catch 22).
-		 * Resense the socket Voltage Sense pins after applying
-		 * socket power.
-		 *
-		 * Note: It takes about 2.5ms for the MAX1602 VCC output
-		 * to rise.
-		 */
-		mdelay(3);
-
-		sa1111_pcmcia_socket_state(skt, &new_state);
-
-		if (!new_state.vs_3v && !new_state.vs_Xv) {
-			/*
-			 * Switch to 5V,  Configure socket with 5V voltage
-			 */
-			max1600_configure(m, 0, 0);
-
-			/*
-			 * It takes about 100ms to turn off Vcc.
-			 */
-			mdelay(100);
-
-			/*
-			 * We need to hack around the const qualifier as
-			 * well to keep this ugly workaround localized and
-			 * not force it to the rest of the code. Barf bags
-			 * available in the seat pocket in front of you!
-			 */
-			((socket_state_t *)state)->Vcc = 50;
-			((socket_state_t *)state)->Vpp = 50;
-			goto again;
-		}
-	}
-#endif
-
-	return ret;
-}
-
-static struct pcmcia_low_level lubbock_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= lubbock_pcmcia_hw_init,
-	.configure_socket	= lubbock_pcmcia_configure_socket,
-	.first			= 0,
-	.nr			= 2,
-};
-
-#include "pxa2xx_base.h"
-
-int pcmcia_lubbock_init(struct sa1111_dev *sadev)
-{
-	pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
-	pxa2xx_configure_sockets(&sadev->dev, &lubbock_pcmcia_ops);
-	return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
-				 pxa2xx_drv_pcmcia_add_one);
-}
-
-MODULE_LICENSE("GPL");