Add LTC2941/LTC2943 Battery Gauge Driver

Both the LTC2941 and LTC2943 measure battery capacity.
The LTC2943 is compatible with the LTC2941, it adds voltage and
temperature monitoring, and uses a slightly different conversion
formula for the charge counter.

To avoid confusion with e.g. the LTC2945, the driver is called
LTC2941 instead of LTC294X.

v2: Fix units of measurement: uV, uA and centidegrees.
v3: Correctly set configuration register. Allow negative values
    for the sense resistor.
v4: Run checkpatch.pl and fix all errors and warnings.
v5: Prefix "lltc," to devicetree properties.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
[ removed .owner field ]
Signed-off-by: Sebastian Reichel <sre@kernel.org>

3 files changed, 556 insertions, 0 deletions

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index a79f16afb588..27b751b995fb 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -388,6 +388,14 @@ config CHARGER_TPS65090
 	 Say Y here to enable support for battery charging with TPS65090
 	 PMIC chips.
 
+config BATTERY_GAUGE_LTC2941
+	tristate "LTC2941/LTC2943 Battery Gauge Driver"
+	depends on I2C
+	help
+	  Say Y here to include support for LTC2941 and LTC2943 Battery
+	  Gauge IC. The driver reports the charge count continuously, and
+	  measures the voltage and temperature every 10 seconds.
+
 config AB8500_BM
 	bool "AB8500 Battery Management Driver"
 	depends on AB8500_CORE && AB8500_GPADC
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 31216cb7e8a1..36f9e0d10111 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
 obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o
 obj-$(CONFIG_BATTERY_DS2782)	+= ds2782_battery.o
+obj-$(CONFIG_BATTERY_GAUGE_LTC2941)	+= ltc2941-battery-gauge.o
 obj-$(CONFIG_BATTERY_GOLDFISH)	+= goldfish_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
diff --git a/drivers/power/ltc2941-battery-gauge.c b/drivers/power/ltc2941-battery-gauge.c
new file mode 100644
index 000000000000..e31c927a6d16
--- /dev/null
+++ b/drivers/power/ltc2941-battery-gauge.c
@@ -0,0 +1,547 @@
+/*
+ * I2C client/driver for the Linear Technology LTC2941 and LTC2943
+ * Battery Gas Gauge IC
+ *
+ * Copyright (C) 2014 Topic Embedded Systems
+ *
+ * Author: Auryn Verwegen
+ * Author: Mike Looijmans
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#define I16_MSB(x)			((x >> 8) & 0xFF)
+#define I16_LSB(x)			(x & 0xFF)
+
+#define LTC294X_WORK_DELAY		10	/* Update delay in seconds */
+
+#define LTC294X_MAX_VALUE		0xFFFF
+#define LTC294X_MID_SUPPLY		0x7FFF
+
+#define LTC2941_MAX_PRESCALER_EXP	7
+#define LTC2943_MAX_PRESCALER_EXP	6
+
+enum ltc294x_reg {
+	LTC294X_REG_STATUS		= 0x00,
+	LTC294X_REG_CONTROL		= 0x01,
+	LTC294X_REG_ACC_CHARGE_MSB	= 0x02,
+	LTC294X_REG_ACC_CHARGE_LSB	= 0x03,
+	LTC294X_REG_THRESH_HIGH_MSB	= 0x04,
+	LTC294X_REG_THRESH_HIGH_LSB	= 0x05,
+	LTC294X_REG_THRESH_LOW_MSB	= 0x06,
+	LTC294X_REG_THRESH_LOW_LSB	= 0x07,
+	LTC294X_REG_VOLTAGE_MSB	= 0x08,
+	LTC294X_REG_VOLTAGE_LSB	= 0x09,
+	LTC294X_REG_CURRENT_MSB	= 0x0E,
+	LTC294X_REG_CURRENT_LSB	= 0x0F,
+	LTC294X_REG_TEMPERATURE_MSB	= 0x14,
+	LTC294X_REG_TEMPERATURE_LSB	= 0x15,
+};
+
+#define LTC2943_REG_CONTROL_MODE_MASK (BIT(7) | BIT(6))
+#define LTC2943_REG_CONTROL_MODE_SCAN BIT(7)
+#define LTC294X_REG_CONTROL_PRESCALER_MASK	(BIT(5) | BIT(4) | BIT(3))
+#define LTC294X_REG_CONTROL_SHUTDOWN_MASK	(BIT(0))
+#define LTC294X_REG_CONTROL_PRESCALER_SET(x) \
+	((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
+#define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED	0
+
+#define LTC2941_NUM_REGS	0x08
+#define LTC2943_NUM_REGS	0x18
+
+struct ltc294x_info {
+	struct i2c_client *client;	/* I2C Client pointer */
+	struct power_supply supply;	/* Supply pointer */
+	struct delayed_work work;	/* Work scheduler */
+	int num_regs;	/* Number of registers (chip type) */
+	int id;		/* Identifier of ltc294x chip */
+	int charge;	/* Last charge register content */
+	int r_sense;	/* mOhm */
+	int Qlsb;	/* nAh */
+};
+
+static DEFINE_IDR(ltc294x_id);
+static DEFINE_MUTEX(ltc294x_lock);
+
+static inline int convert_bin_to_uAh(
+	const struct ltc294x_info *info, int Q)
+{
+	return ((Q * (info->Qlsb / 10))) / 100;
+}
+
+static inline int convert_uAh_to_bin(
+	const struct ltc294x_info *info, int uAh)
+{
+	int Q;
+
+	Q = (uAh * 100) / (info->Qlsb/10);
+	return (Q < LTC294X_MAX_VALUE) ? Q : LTC294X_MAX_VALUE;
+}
+
+static int ltc294x_read_regs(struct i2c_client *client,
+	enum ltc294x_reg reg, u8 *buf, int num_regs)
+{
+	int ret;
+	struct i2c_msg msgs[2] = { };
+	u8 reg_start = reg;
+
+	msgs[0].addr	= client->addr;
+	msgs[0].len	= 1;
+	msgs[0].buf	= &reg_start;
+
+	msgs[1].addr	= client->addr;
+	msgs[1].len	= num_regs;
+	msgs[1].buf	= buf;
+	msgs[1].flags	= I2C_M_RD;
+
+	ret = i2c_transfer(client->adapter, &msgs[0], 2);
+	if (ret < 0) {
+		dev_err(&client->dev, "ltc2941 read_reg failed!\n");
+		return ret;
+	}
+
+	dev_dbg(&client->dev, "%s (%#x, %d) -> %#x\n",
+		__func__, reg, num_regs, *buf);
+
+	return 0;
+}
+
+static int ltc294x_write_regs(struct i2c_client *client,
+	enum ltc294x_reg reg, const u8 *buf, int num_regs)
+{
+	int ret;
+	u8 reg_start = reg;
+
+	ret = i2c_smbus_write_i2c_block_data(client, reg_start, num_regs, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "ltc2941 write_reg failed!\n");
+		return ret;
+	}
+
+	dev_dbg(&client->dev, "%s (%#x, %d) -> %#x\n",
+		__func__, reg, num_regs, *buf);
+
+	return 0;
+}
+
+static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp)
+{
+	int ret;
+	u8 value;
+	u8 control;
+
+	/* Read status and control registers */
+	ret = ltc294x_read_regs(info->client, LTC294X_REG_CONTROL, &value, 1);
+	if (ret < 0) {
+		dev_err(&info->client->dev,
+			"Could not read registers from device\n");
+		goto error_exit;
+	}
+
+	control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) |
+				LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED;
+	/* Put the 2943 into "monitor" mode, so it measures every 10 sec */
+	if (info->num_regs == LTC2943_NUM_REGS)
+		control |= LTC2943_REG_CONTROL_MODE_SCAN;
+
+	if (value != control) {
+		ret = ltc294x_write_regs(info->client,
+			LTC294X_REG_CONTROL, &control, 1);
+		if (ret < 0) {
+			dev_err(&info->client->dev,
+				"Could not write register\n");
+			goto error_exit;
+		}
+	}
+
+	return 0;
+
+error_exit:
+	return ret;
+}
+
+static int ltc294x_read_charge_register(const struct ltc294x_info *info)
+{
+	int ret;
+	u8 datar[2];
+
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_ACC_CHARGE_MSB, &datar[0], 2);
+	if (ret < 0)
+		return ret;
+	return (datar[0] << 8) + datar[1];
+}
+
+static int ltc294x_get_charge_now(const struct ltc294x_info *info, int *val)
+{
+	int value = ltc294x_read_charge_register(info);
+
+	if (value < 0)
+		return value;
+	/* When r_sense < 0, this counts up when the battery discharges */
+	if (info->Qlsb < 0)
+		value -= 0xFFFF;
+	*val = convert_bin_to_uAh(info, value);
+	return 0;
+}
+
+static int ltc294x_set_charge_now(const struct ltc294x_info *info, int val)
+{
+	int ret;
+	u8 dataw[2];
+	u8 ctrl_reg;
+	s32 value;
+
+	value = convert_uAh_to_bin(info, val);
+	/* Direction depends on how sense+/- were connected */
+	if (info->Qlsb < 0)
+		value += 0xFFFF;
+	if ((value < 0) || (value > 0xFFFF)) /* input validation */
+		return -EINVAL;
+
+	/* Read control register */
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_CONTROL, &ctrl_reg, 1);
+	if (ret < 0)
+		return ret;
+	/* Disable analog section */
+	ctrl_reg |= LTC294X_REG_CONTROL_SHUTDOWN_MASK;
+	ret = ltc294x_write_regs(info->client,
+		LTC294X_REG_CONTROL, &ctrl_reg, 1);
+	if (ret < 0)
+		return ret;
+	/* Set new charge value */
+	dataw[0] = I16_MSB(value);
+	dataw[1] = I16_LSB(value);
+	ret = ltc294x_write_regs(info->client,
+		LTC294X_REG_ACC_CHARGE_MSB, &dataw[0], 2);
+	if (ret < 0)
+		goto error_exit;
+	/* Enable analog section */
+error_exit:
+	ctrl_reg &= ~LTC294X_REG_CONTROL_SHUTDOWN_MASK;
+	ret = ltc294x_write_regs(info->client,
+		LTC294X_REG_CONTROL, &ctrl_reg, 1);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int ltc294x_get_charge_counter(
+	const struct ltc294x_info *info, int *val)
+{
+	int value = ltc294x_read_charge_register(info);
+
+	if (value < 0)
+		return value;
+	value -= LTC294X_MID_SUPPLY;
+	*val = convert_bin_to_uAh(info, value);
+	return 0;
+}
+
+static int ltc294x_get_voltage(const struct ltc294x_info *info, int *val)
+{
+	int ret;
+	u8 datar[2];
+	u32 value;
+
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_VOLTAGE_MSB, &datar[0], 2);
+	value = (datar[0] << 8) | datar[1];
+	*val = ((value * 23600) / 0xFFFF) * 1000; /* in uV */
+	return ret;
+}
+
+static int ltc294x_get_current(const struct ltc294x_info *info, int *val)
+{
+	int ret;
+	u8 datar[2];
+	s32 value;
+
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_CURRENT_MSB, &datar[0], 2);
+	value = (datar[0] << 8) | datar[1];
+	value -= 0x7FFF;
+	/* Value is in range -32k..+32k, r_sense is usually 10..50 mOhm,
+	 * the formula below keeps everything in s32 range while preserving
+	 * enough digits */
+	*val = 1000 * ((60000 * value) / (info->r_sense * 0x7FFF)); /* in uA */
+	return ret;
+}
+
+static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
+{
+	int ret;
+	u8 datar[2];
+	u32 value;
+
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_TEMPERATURE_MSB, &datar[0], 2);
+	value = (datar[0] << 8) | datar[1];
+	/* Full-scale is 510 Kelvin, convert to centidegrees  */
+	*val = (((51000 * value) / 0xFFFF) - 27215);
+	return ret;
+}
+
+static int ltc294x_get_property(struct power_supply *psy,
+				enum power_supply_property prop,
+				union power_supply_propval *val)
+{
+	struct ltc294x_info *info =
+		container_of(psy, struct ltc294x_info, supply);
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return ltc294x_get_charge_now(info, &val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		return ltc294x_get_charge_counter(info, &val->intval);
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		return ltc294x_get_voltage(info, &val->intval);
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		return ltc294x_get_current(info, &val->intval);
+	case POWER_SUPPLY_PROP_TEMP:
+		return ltc294x_get_temperature(info, &val->intval);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltc294x_set_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	const union power_supply_propval *val)
+{
+	struct ltc294x_info *info =
+		container_of(psy, struct ltc294x_info, supply);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return ltc294x_set_charge_now(info, val->intval);
+	default:
+		return -EPERM;
+	}
+}
+
+static int ltc294x_property_is_writeable(
+	struct power_supply *psy, enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static void ltc294x_update(struct ltc294x_info *info)
+{
+	int charge = ltc294x_read_charge_register(info);
+
+	if (charge != info->charge) {
+		info->charge = charge;
+		power_supply_changed(&info->supply);
+	}
+}
+
+static void ltc294x_work(struct work_struct *work)
+{
+	struct ltc294x_info *info;
+
+	info = container_of(work, struct ltc294x_info, work.work);
+	ltc294x_update(info);
+	schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+}
+
+static enum power_supply_property ltc294x_properties[] = {
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static int ltc294x_i2c_remove(struct i2c_client *client)
+{
+	struct ltc294x_info *info = i2c_get_clientdata(client);
+
+	cancel_delayed_work(&info->work);
+	power_supply_unregister(&info->supply);
+	kfree(info->supply.name);
+	mutex_lock(&ltc294x_lock);
+	idr_remove(&ltc294x_id, info->id);
+	mutex_unlock(&ltc294x_lock);
+	return 0;
+}
+
+static int ltc294x_i2c_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct ltc294x_info *info;
+	int ret;
+	int num;
+	u32 prescaler_exp;
+	s32 r_sense;
+	struct device_node *np;
+
+	mutex_lock(&ltc294x_lock);
+	ret = idr_alloc(&ltc294x_id, client, 0, 0, GFP_KERNEL);
+	mutex_unlock(&ltc294x_lock);
+	if (ret < 0)
+		goto fail_id;
+
+	num = ret;
+
+	info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
+	if (info == NULL) {
+		ret = -ENOMEM;
+		goto fail_info;
+	}
+
+	i2c_set_clientdata(client, info);
+
+	info->num_regs = id->driver_data;
+	info->supply.name = kasprintf(GFP_KERNEL, "%s-%d", client->name, num);
+	if (!info->supply.name) {
+		ret = -ENOMEM;
+		goto fail_name;
+	}
+
+	np = of_node_get(client->dev.of_node);
+
+	/* r_sense can be negative, when sense+ is connected to the battery
+	 * instead of the sense-. This results in reversed measurements. */
+	ret = of_property_read_u32(np, "lltc,resistor-sense", &r_sense);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"Could not find lltc,resistor-sense in devicetree\n");
+		goto fail_name;
+	}
+	info->r_sense = r_sense;
+
+	ret = of_property_read_u32(np, "lltc,prescaler-exponent",
+		&prescaler_exp);
+	if (ret < 0) {
+		dev_warn(&client->dev,
+			"lltc,prescaler-exponent not in devicetree\n");
+		prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
+	}
+
+	if (info->num_regs == LTC2943_NUM_REGS) {
+		if (prescaler_exp > LTC2943_MAX_PRESCALER_EXP)
+			prescaler_exp = LTC2943_MAX_PRESCALER_EXP;
+		info->Qlsb = ((340 * 50000) / r_sense) /
+				(4096 / (1 << (2*prescaler_exp)));
+	} else {
+		if (prescaler_exp > LTC2941_MAX_PRESCALER_EXP)
+			prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
+		info->Qlsb = ((58 * 50000) / r_sense) /
+				(128 / (1 << prescaler_exp));
+	}
+
+	info->client = client;
+	info->id = num;
+	info->supply.type = POWER_SUPPLY_TYPE_BATTERY;
+	info->supply.properties = ltc294x_properties;
+	if (info->num_regs >= LTC294X_REG_TEMPERATURE_LSB)
+		info->supply.num_properties =
+			ARRAY_SIZE(ltc294x_properties);
+	else if (info->num_regs >= LTC294X_REG_CURRENT_LSB)
+		info->supply.num_properties =
+			ARRAY_SIZE(ltc294x_properties) - 1;
+	else if (info->num_regs >= LTC294X_REG_VOLTAGE_LSB)
+		info->supply.num_properties =
+			ARRAY_SIZE(ltc294x_properties) - 2;
+	else
+		info->supply.num_properties =
+			ARRAY_SIZE(ltc294x_properties) - 3;
+	info->supply.get_property = ltc294x_get_property;
+	info->supply.set_property = ltc294x_set_property;
+	info->supply.property_is_writeable = ltc294x_property_is_writeable;
+	info->supply.external_power_changed	= NULL;
+
+	INIT_DELAYED_WORK(&info->work, ltc294x_work);
+
+	ret = ltc294x_reset(info, prescaler_exp);
+	if (ret < 0) {
+		dev_err(&client->dev, "Communication with chip failed\n");
+		goto fail_comm;
+	}
+
+	ret = power_supply_register(&client->dev, &info->supply);
+	if (ret) {
+		dev_err(&client->dev, "failed to register ltc2941\n");
+		goto fail_register;
+	} else {
+		schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+	}
+
+	return 0;
+
+fail_register:
+	kfree(info->supply.name);
+fail_comm:
+fail_name:
+fail_info:
+	mutex_lock(&ltc294x_lock);
+	idr_remove(&ltc294x_id, num);
+	mutex_unlock(&ltc294x_lock);
+fail_id:
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ltc294x_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ltc294x_info *info = i2c_get_clientdata(client);
+
+	cancel_delayed_work(&info->work);
+	return 0;
+}
+
+static int ltc294x_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ltc294x_info *info = i2c_get_clientdata(client);
+
+	schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ltc294x_pm_ops, ltc294x_suspend, ltc294x_resume);
+#define LTC294X_PM_OPS (&ltc294x_pm_ops)
+
+#else
+#define LTC294X_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+
+static const struct i2c_device_id ltc294x_i2c_id[] = {
+	{"ltc2941", LTC2941_NUM_REGS},
+	{"ltc2943", LTC2943_NUM_REGS},
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
+
+static struct i2c_driver ltc294x_driver = {
+	.driver = {
+		.name	= "LTC2941",
+		.pm	= LTC294X_PM_OPS,
+	},
+	.probe		= ltc294x_i2c_probe,
+	.remove		= ltc294x_i2c_remove,
+	.id_table	= ltc294x_i2c_id,
+};
+module_i2c_driver(ltc294x_driver);
+
+MODULE_AUTHOR("Auryn Verwegen, Topic Embedded Systems");
+MODULE_AUTHOR("Mike Looijmans, Topic Embedded Products");
+MODULE_DESCRIPTION("LTC2941/LTC2943 Battery Gas Gauge IC driver");
+MODULE_LICENSE("GPL");