[SCSI] hpsa: Add hba mode to the hpsa driver

This allows exposing physical disks behind Smart
Array controllers to the OS (if the controller
has the right firmware and is in "hba" mode)

Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 89 insertions, 4 deletions

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 388e229cdcec..eb23eeacf592 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2128,6 +2128,37 @@ out:
 	return rc;
 }
 
+static int hpsa_bmic_ctrl_mode_sense(struct ctlr_info *h,
+		unsigned char *scsi3addr, unsigned char page,
+		struct bmic_controller_parameters *buf, size_t bufsize)
+{
+	int rc = IO_OK;
+	struct CommandList *c;
+	struct ErrorInfo *ei;
+
+	c = cmd_special_alloc(h);
+
+	if (c == NULL) {			/* trouble... */
+		dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+		return -ENOMEM;
+	}
+
+	if (fill_cmd(c, BMIC_SENSE_CONTROLLER_PARAMETERS, h, buf, bufsize,
+			page, scsi3addr, TYPE_CMD)) {
+		rc = -1;
+		goto out;
+	}
+	hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
+	ei = c->err_info;
+	if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+		hpsa_scsi_interpret_error(h, c);
+		rc = -1;
+	}
+out:
+	cmd_special_free(h, c);
+	return rc;
+	}
+
 static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
 	u8 reset_type)
 {
@@ -2929,6 +2960,24 @@ u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, int i,
 	return NULL;
 }
 
+static int hpsa_hba_mode_enabled(struct ctlr_info *h)
+{
+	int rc;
+	struct bmic_controller_parameters *ctlr_params;
+	ctlr_params = kzalloc(sizeof(struct bmic_controller_parameters),
+		GFP_KERNEL);
+
+	if (!ctlr_params)
+		return 0;
+	rc = hpsa_bmic_ctrl_mode_sense(h, RAID_CTLR_LUNID, 0, ctlr_params,
+		sizeof(struct bmic_controller_parameters));
+	if (rc != 0) {
+		kfree(ctlr_params);
+		return 0;
+	}
+	return ctlr_params->nvram_flags & (1 << 3) ? 1 : 0;
+}
+
 static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 {
 	/* the idea here is we could get notified
@@ -2952,6 +3001,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 24;
 	int i, n_ext_target_devs, ndevs_to_allocate;
 	int raid_ctlr_position;
+	u8 rescan_hba_mode;
 	DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
 
 	currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
@@ -2965,6 +3015,15 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 	}
 	memset(lunzerobits, 0, sizeof(lunzerobits));
 
+	rescan_hba_mode = hpsa_hba_mode_enabled(h);
+
+	if (!h->hba_mode_enabled && rescan_hba_mode)
+		dev_warn(&h->pdev->dev, "HBA mode enabled\n");
+	else if (h->hba_mode_enabled && !rescan_hba_mode)
+		dev_warn(&h->pdev->dev, "HBA mode disabled\n");
+
+	h->hba_mode_enabled = rescan_hba_mode;
+
 	if (hpsa_gather_lun_info(h, reportlunsize,
 			(struct ReportLUNdata *) physdev_list, &nphysicals,
 			&physical_mode, logdev_list, &nlogicals))
@@ -3048,7 +3107,19 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
 				ncurrent++;
 			break;
 		case TYPE_DISK:
-			if (i >= nphysicals) {
+			if (h->hba_mode_enabled) {
+				/* never use raid mapper in HBA mode */
+				this_device->offload_enabled = 0;
+				ncurrent++;
+				break;
+			} else if (h->acciopath_status) {
+				if (i >= nphysicals) {
+					ncurrent++;
+					break;
+				}
+			} else {
+				if (i < nphysicals)
+					break;
 				ncurrent++;
 				break;
 			}
@@ -4116,7 +4187,10 @@ static int hpsa_register_scsi(struct ctlr_info *h)
 	sh->max_lun = HPSA_MAX_LUN;
 	sh->max_id = HPSA_MAX_LUN;
 	sh->can_queue = h->nr_cmds;
-	sh->cmd_per_lun = h->nr_cmds;
+	if (h->hba_mode_enabled)
+		sh->cmd_per_lun = 7;
+	else
+		sh->cmd_per_lun = h->nr_cmds;
 	sh->sg_tablesize = h->maxsgentries;
 	h->scsi_host = sh;
 	sh->hostdata[0] = (unsigned long) h;
@@ -5261,6 +5335,16 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.CDB[8] = (size >> 8) & 0xFF;
 			c->Request.CDB[9] = size & 0xFF;
 			break;
+		case BMIC_SENSE_CONTROLLER_PARAMETERS:
+			c->Request.CDBLen = 10;
+			c->Request.Type.Attribute = ATTR_SIMPLE;
+			c->Request.Type.Direction = XFER_READ;
+			c->Request.Timeout = 0;
+			c->Request.CDB[0] = BMIC_READ;
+			c->Request.CDB[6] = BMIC_SENSE_CONTROLLER_PARAMETERS;
+			c->Request.CDB[7] = (size >> 16) & 0xFF;
+			c->Request.CDB[8] = (size >> 8) & 0xFF;
+			break;
 		default:
 			dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
 			BUG();
@@ -6885,6 +6969,7 @@ reinit_after_soft_reset:
 
 	pci_set_drvdata(pdev, h);
 	h->ndevices = 0;
+	h->hba_mode_enabled = 0;
 	h->scsi_host = NULL;
 	spin_lock_init(&h->devlock);
 	hpsa_put_ctlr_into_performant_mode(h);
@@ -6944,8 +7029,8 @@ reinit_after_soft_reset:
 		goto reinit_after_soft_reset;
 	}
 
-	/* Enable Accelerated IO path at driver layer */
-	h->acciopath_status = 1;
+		/* Enable Accelerated IO path at driver layer */
+		h->acciopath_status = 1;
 
 	h->drv_req_rescan = 0;