Merge branch 'master'; commit 'v3.2-rc2' into next

1 files changed, 25 insertions, 1 deletions

diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 79313a7a2356..35f50c2183e1 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -104,6 +104,7 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
 	u32 parity_count = 0;
 	u32 llctl, link_rate;
 	u32 clksm_value = 0;
+	u32 sp_timeouts = 0;
 
 	iphy->link_layer_registers = reg;
 
@@ -211,6 +212,18 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
 	llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
 	writel(llctl, &iphy->link_layer_registers->link_layer_control);
 
+	sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);
+
+	/* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
+	sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
+
+	/* Set RATE_CHANGE timeout value to 0x3B (59us).  This ensures SCU can
+	 * lock with 3Gb drive when SCU max rate is set to 1.5Gb.
+	 */
+	sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
+
+	writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);
+
 	if (is_a2(ihost->pdev)) {
 		/* Program the max ARB time for the PHY to 700us so we inter-operate with
 		 * the PMC expander which shuts down PHYs if the expander PHY generates too
@@ -695,7 +708,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code)
 				 __func__,
 				 event_code);
 
-			return SCI_FAILURE;;
+			return SCI_FAILURE;
 		}
 		return SCI_SUCCESS;
 	case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
@@ -1300,6 +1313,17 @@ int isci_phy_control(struct asd_sas_phy *sas_phy,
 		ret = isci_port_perform_hard_reset(ihost, iport, iphy);
 
 		break;
+	case PHY_FUNC_GET_EVENTS: {
+		struct scu_link_layer_registers __iomem *r;
+		struct sas_phy *phy = sas_phy->phy;
+
+		r = iphy->link_layer_registers;
+		phy->running_disparity_error_count = readl(&r->running_disparity_error_count);
+		phy->loss_of_dword_sync_count = readl(&r->loss_of_sync_error_count);
+		phy->phy_reset_problem_count = readl(&r->phy_reset_problem_count);
+		phy->invalid_dword_count = readl(&r->invalid_dword_counter);
+		break;
+	}
 
 	default:
 		dev_dbg(&ihost->pdev->dev,