Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 190 insertions, 74 deletions

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0b2c53af85c7..e8c8c1ecc1f5 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2014 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2015 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -1330,13 +1330,14 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
 void
 lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
 {
+	spin_lock_irq(&phba->hbalock);
+	phba->link_state = LPFC_HBA_ERROR;
+	spin_unlock_irq(&phba->hbalock);
+
 	lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
 	lpfc_offline(phba);
-	lpfc_sli4_brdreset(phba);
 	lpfc_hba_down_post(phba);
-	lpfc_sli4_post_status_check(phba);
 	lpfc_unblock_mgmt_io(phba);
-	phba->link_state = LPFC_HBA_ERROR;
 }
 
 /**
@@ -1629,6 +1630,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 	uint32_t uerrlo_reg, uemasklo_reg;
 	uint32_t pci_rd_rc1, pci_rd_rc2;
 	bool en_rn_msg = true;
+	struct temp_event temp_event_data;
 	int rc;
 
 	/* If the pci channel is offline, ignore possible errors, since
@@ -1636,9 +1638,6 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 	 */
 	if (pci_channel_offline(phba->pcidev))
 		return;
-	/* If resets are disabled then leave the HBA alone and return */
-	if (!phba->cfg_enable_hba_reset)
-		return;
 
 	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
 	switch (if_type) {
@@ -1654,6 +1653,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 			return;
 		lpfc_sli4_offline_eratt(phba);
 		break;
+
 	case LPFC_SLI_INTF_IF_TYPE_2:
 		pci_rd_rc1 = lpfc_readl(
 				phba->sli4_hba.u.if_type2.STATUSregaddr,
@@ -1668,15 +1668,27 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 		reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
 		reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
 		if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
-			/* TODO: Register for Overtemp async events. */
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"2889 Port Overtemperature event, "
-				"taking port offline\n");
+				"taking port offline Data: x%x x%x\n",
+				reg_err1, reg_err2);
+
+			temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
+			temp_event_data.event_code = LPFC_CRIT_TEMP;
+			temp_event_data.data = 0xFFFFFFFF;
+
+			shost = lpfc_shost_from_vport(phba->pport);
+			fc_host_post_vendor_event(shost, fc_get_event_number(),
+						  sizeof(temp_event_data),
+						  (char *)&temp_event_data,
+						  SCSI_NL_VID_TYPE_PCI
+						  | PCI_VENDOR_ID_EMULEX);
+
 			spin_lock_irq(&phba->hbalock);
 			phba->over_temp_state = HBA_OVER_TEMP;
 			spin_unlock_irq(&phba->hbalock);
 			lpfc_sli4_offline_eratt(phba);
-			break;
+			return;
 		}
 		if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
 		    reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) {
@@ -1693,6 +1705,10 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"3145 Port Down: Provisioning\n");
 
+		/* If resets are disabled then leave the HBA alone and return */
+		if (!phba->cfg_enable_hba_reset)
+			return;
+
 		/* Check port status register for function reset */
 		rc = lpfc_sli4_port_sta_fn_reset(phba, LPFC_MBX_NO_WAIT,
 				en_rn_msg);
@@ -2759,9 +2775,19 @@ lpfc_sli4_node_prep(struct lpfc_hba *phba)
 			list_for_each_entry_safe(ndlp, next_ndlp,
 						 &vports[i]->fc_nodes,
 						 nlp_listp) {
-				if (NLP_CHK_NODE_ACT(ndlp))
+				if (NLP_CHK_NODE_ACT(ndlp)) {
 					ndlp->nlp_rpi =
 						lpfc_sli4_alloc_rpi(phba);
+					lpfc_printf_vlog(ndlp->vport, KERN_INFO,
+							 LOG_NODE,
+							 "0009 rpi:%x DID:%x "
+							 "flg:%x map:%x %p\n",
+							 ndlp->nlp_rpi,
+							 ndlp->nlp_DID,
+							 ndlp->nlp_flag,
+							 ndlp->nlp_usg_map,
+							 ndlp);
+				}
 			}
 		}
 	}
@@ -2925,8 +2951,18 @@ lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action)
 				 * RPI. Get a new RPI when the adapter port
 				 * comes back online.
 				 */
-				if (phba->sli_rev == LPFC_SLI_REV4)
+				if (phba->sli_rev == LPFC_SLI_REV4) {
+					lpfc_printf_vlog(ndlp->vport,
+							 KERN_INFO, LOG_NODE,
+							 "0011 lpfc_offline: "
+							 "ndlp:x%p did %x "
+							 "usgmap:x%x rpi:%x\n",
+							 ndlp, ndlp->nlp_DID,
+							 ndlp->nlp_usg_map,
+							 ndlp->nlp_rpi);
+
 					lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
+				}
 				lpfc_unreg_rpi(vports[i], ndlp);
 			}
 		}
@@ -3241,12 +3277,17 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 	struct Scsi_Host  *shost;
 	int error = 0;
 
-	if (dev != &phba->pcidev->dev)
+	if (dev != &phba->pcidev->dev) {
 		shost = scsi_host_alloc(&lpfc_vport_template,
 					sizeof(struct lpfc_vport));
-	else
-		shost = scsi_host_alloc(&lpfc_template,
+	} else {
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			shost = scsi_host_alloc(&lpfc_template,
 					sizeof(struct lpfc_vport));
+		else
+			shost = scsi_host_alloc(&lpfc_template_s3,
+					sizeof(struct lpfc_vport));
+	}
 	if (!shost)
 		goto out;
 
@@ -3685,6 +3726,11 @@ lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
 	case LPFC_ASYNC_LINK_SPEED_10GBPS:
 		link_speed = LPFC_LINK_SPEED_10GHZ;
 		break;
+	case LPFC_ASYNC_LINK_SPEED_20GBPS:
+	case LPFC_ASYNC_LINK_SPEED_25GBPS:
+	case LPFC_ASYNC_LINK_SPEED_40GBPS:
+		link_speed = LPFC_LINK_SPEED_UNKNOWN;
+		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0483 Invalid link-attention link speed: x%x\n",
@@ -3756,46 +3802,55 @@ lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
 	switch (evt_code) {
 	case LPFC_TRAILER_CODE_LINK:
 		switch (speed_code) {
-		case LPFC_EVT_CODE_LINK_NO_LINK:
+		case LPFC_ASYNC_LINK_SPEED_ZERO:
 			port_speed = 0;
 			break;
-		case LPFC_EVT_CODE_LINK_10_MBIT:
+		case LPFC_ASYNC_LINK_SPEED_10MBPS:
 			port_speed = 10;
 			break;
-		case LPFC_EVT_CODE_LINK_100_MBIT:
+		case LPFC_ASYNC_LINK_SPEED_100MBPS:
 			port_speed = 100;
 			break;
-		case LPFC_EVT_CODE_LINK_1_GBIT:
+		case LPFC_ASYNC_LINK_SPEED_1GBPS:
 			port_speed = 1000;
 			break;
-		case LPFC_EVT_CODE_LINK_10_GBIT:
+		case LPFC_ASYNC_LINK_SPEED_10GBPS:
 			port_speed = 10000;
 			break;
+		case LPFC_ASYNC_LINK_SPEED_20GBPS:
+			port_speed = 20000;
+			break;
+		case LPFC_ASYNC_LINK_SPEED_25GBPS:
+			port_speed = 25000;
+			break;
+		case LPFC_ASYNC_LINK_SPEED_40GBPS:
+			port_speed = 40000;
+			break;
 		default:
 			port_speed = 0;
 		}
 		break;
 	case LPFC_TRAILER_CODE_FC:
 		switch (speed_code) {
-		case LPFC_EVT_CODE_FC_NO_LINK:
+		case LPFC_FC_LA_SPEED_UNKNOWN:
 			port_speed = 0;
 			break;
-		case LPFC_EVT_CODE_FC_1_GBAUD:
+		case LPFC_FC_LA_SPEED_1G:
 			port_speed = 1000;
 			break;
-		case LPFC_EVT_CODE_FC_2_GBAUD:
+		case LPFC_FC_LA_SPEED_2G:
 			port_speed = 2000;
 			break;
-		case LPFC_EVT_CODE_FC_4_GBAUD:
+		case LPFC_FC_LA_SPEED_4G:
 			port_speed = 4000;
 			break;
-		case LPFC_EVT_CODE_FC_8_GBAUD:
+		case LPFC_FC_LA_SPEED_8G:
 			port_speed = 8000;
 			break;
-		case LPFC_EVT_CODE_FC_10_GBAUD:
+		case LPFC_FC_LA_SPEED_10G:
 			port_speed = 10000;
 			break;
-		case LPFC_EVT_CODE_FC_16_GBAUD:
+		case LPFC_FC_LA_SPEED_16G:
 			port_speed = 16000;
 			break;
 		default:
@@ -4044,18 +4099,21 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
 	char port_name;
 	char message[128];
 	uint8_t status;
+	uint8_t evt_type;
+	struct temp_event temp_event_data;
 	struct lpfc_acqe_misconfigured_event *misconfigured;
+	struct Scsi_Host  *shost;
+
+	evt_type = bf_get(lpfc_trailer_type, acqe_sli);
 
-	/* special case misconfigured event as it contains data for all ports */
-	if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
-		 LPFC_SLI_INTF_IF_TYPE_2) ||
-		(bf_get(lpfc_trailer_type, acqe_sli) !=
-			LPFC_SLI_EVENT_TYPE_MISCONFIGURED)) {
+	/* Special case Lancer */
+	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+		 LPFC_SLI_INTF_IF_TYPE_2) {
 		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
 				"2901 Async SLI event - Event Data1:x%08x Event Data2:"
 				"x%08x SLI Event Type:%d\n",
 				acqe_sli->event_data1, acqe_sli->event_data2,
-				bf_get(lpfc_trailer_type, acqe_sli));
+				evt_type);
 		return;
 	}
 
@@ -4063,58 +4121,107 @@ lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
 	if (port_name == 0x00)
 		port_name = '?'; /* get port name is empty */
 
-	misconfigured = (struct lpfc_acqe_misconfigured_event *)
+	switch (evt_type) {
+	case LPFC_SLI_EVENT_TYPE_OVER_TEMP:
+		temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
+		temp_event_data.event_code = LPFC_THRESHOLD_TEMP;
+		temp_event_data.data = (uint32_t)acqe_sli->event_data1;
+
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"3190 Over Temperature:%d Celsius- Port Name %c\n",
+				acqe_sli->event_data1, port_name);
+
+		shost = lpfc_shost_from_vport(phba->pport);
+		fc_host_post_vendor_event(shost, fc_get_event_number(),
+					  sizeof(temp_event_data),
+					  (char *)&temp_event_data,
+					  SCSI_NL_VID_TYPE_PCI
+					  | PCI_VENDOR_ID_EMULEX);
+		break;
+	case LPFC_SLI_EVENT_TYPE_NORM_TEMP:
+		temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
+		temp_event_data.event_code = LPFC_NORMAL_TEMP;
+		temp_event_data.data = (uint32_t)acqe_sli->event_data1;
+
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3191 Normal Temperature:%d Celsius - Port Name %c\n",
+				acqe_sli->event_data1, port_name);
+
+		shost = lpfc_shost_from_vport(phba->pport);
+		fc_host_post_vendor_event(shost, fc_get_event_number(),
+					  sizeof(temp_event_data),
+					  (char *)&temp_event_data,
+					  SCSI_NL_VID_TYPE_PCI
+					  | PCI_VENDOR_ID_EMULEX);
+		break;
+	case LPFC_SLI_EVENT_TYPE_MISCONFIGURED:
+		misconfigured = (struct lpfc_acqe_misconfigured_event *)
 					&acqe_sli->event_data1;
 
-	/* fetch the status for this port */
-	switch (phba->sli4_hba.lnk_info.lnk_no) {
-	case LPFC_LINK_NUMBER_0:
-		status = bf_get(lpfc_sli_misconfigured_port0,
+		/* fetch the status for this port */
+		switch (phba->sli4_hba.lnk_info.lnk_no) {
+		case LPFC_LINK_NUMBER_0:
+			status = bf_get(lpfc_sli_misconfigured_port0,
 					&misconfigured->theEvent);
-		break;
-	case LPFC_LINK_NUMBER_1:
-		status = bf_get(lpfc_sli_misconfigured_port1,
+			break;
+		case LPFC_LINK_NUMBER_1:
+			status = bf_get(lpfc_sli_misconfigured_port1,
 					&misconfigured->theEvent);
-		break;
-	case LPFC_LINK_NUMBER_2:
-		status = bf_get(lpfc_sli_misconfigured_port2,
+			break;
+		case LPFC_LINK_NUMBER_2:
+			status = bf_get(lpfc_sli_misconfigured_port2,
 					&misconfigured->theEvent);
-		break;
-	case LPFC_LINK_NUMBER_3:
-		status = bf_get(lpfc_sli_misconfigured_port3,
+			break;
+		case LPFC_LINK_NUMBER_3:
+			status = bf_get(lpfc_sli_misconfigured_port3,
 					&misconfigured->theEvent);
-		break;
-	default:
-		status = ~LPFC_SLI_EVENT_STATUS_VALID;
-		break;
-	}
+			break;
+		default:
+			status = ~LPFC_SLI_EVENT_STATUS_VALID;
+			break;
+		}
 
-	switch (status) {
-	case LPFC_SLI_EVENT_STATUS_VALID:
-		return; /* no message if the sfp is okay */
-	case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
-		sprintf(message, "Optics faulted/incorrectly installed/not " \
-				"installed - Reseat optics, if issue not "
-				"resolved, replace.");
-		break;
-	case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
-		sprintf(message,
-			"Optics of two types installed - Remove one optic or " \
-			"install matching pair of optics.");
-		break;
-	case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
-		sprintf(message, "Incompatible optics - Replace with " \
+		switch (status) {
+		case LPFC_SLI_EVENT_STATUS_VALID:
+			return; /* no message if the sfp is okay */
+		case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
+			sprintf(message, "Optics faulted/incorrectly "
+				"installed/not installed - Reseat optics, "
+				"if issue not resolved, replace.");
+			break;
+		case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
+			sprintf(message,
+				"Optics of two types installed - Remove one "
+				"optic or install matching pair of optics.");
+			break;
+		case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
+			sprintf(message, "Incompatible optics - Replace with "
 				"compatible optics for card to function.");
+			break;
+		default:
+			/* firmware is reporting a status we don't know about */
+			sprintf(message, "Unknown event status x%02x", status);
+			break;
+		}
+
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"3176 Misconfigured Physical Port - "
+				"Port Name %c %s\n", port_name, message);
+		break;
+	case LPFC_SLI_EVENT_TYPE_REMOTE_DPORT:
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3192 Remote DPort Test Initiated - "
+				"Event Data1:x%08x Event Data2: x%08x\n",
+				acqe_sli->event_data1, acqe_sli->event_data2);
 		break;
 	default:
-		/* firmware is reporting a status we don't know about */
-		sprintf(message, "Unknown event status x%02x", status);
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3193 Async SLI event - Event Data1:x%08x Event Data2:"
+				"x%08x SLI Event Type:%d\n",
+				acqe_sli->event_data1, acqe_sli->event_data2,
+				evt_type);
 		break;
 	}
-
-	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-			"3176 Misconfigured Physical Port - "
-			"Port Name %c %s\n", port_name, message);
 }
 
 /**
@@ -5183,6 +5290,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 		rc = lpfc_pci_function_reset(phba);
 		if (unlikely(rc))
 			return -ENODEV;
+		phba->temp_sensor_support = 1;
 	}
 
 	/* Create the bootstrap mailbox command */
@@ -7647,6 +7755,14 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
 			goto out_destroy_els_rq;
 		}
 	}
+
+	/*
+	 * Configure EQ delay multipier for interrupt coalescing using
+	 * MODIFY_EQ_DELAY for all EQs created, LPFC_MAX_EQ_DELAY at a time.
+	 */
+	for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_io_channel;
+			fcp_eqidx += LPFC_MAX_EQ_DELAY)
+		lpfc_modify_fcp_eq_delay(phba, fcp_eqidx);
 	return 0;
 
 out_destroy_els_rq:
@@ -7953,7 +8069,7 @@ wait:
 		 * up to 30 seconds. If the port doesn't respond, treat
 		 * it as an error.
 		 */
-		for (rdy_chk = 0; rdy_chk < 3000; rdy_chk++) {
+		for (rdy_chk = 0; rdy_chk < 1500; rdy_chk++) {
 			if (lpfc_readl(phba->sli4_hba.u.if_type2.
 				STATUSregaddr, &reg_data.word0)) {
 				rc = -ENODEV;