diff options
author | Sreekanth Reddy <sreekanth.reddy@broadcom.com> | 2019-12-26 06:13:27 -0500 |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2020-01-02 22:23:16 -0500 |
commit | e8c2307e6a690db9aaff84153b2857c5c4dfd969 (patch) | |
tree | 01ad06337d7ddad6687b081b7a1c1bda95c9b90b /drivers/scsi/mpt3sas | |
parent | 36c6c7f75b0998f5a4b5c79cbb94ee1ab4ee35c0 (diff) | |
download | linux-stable-e8c2307e6a690db9aaff84153b2857c5c4dfd969.tar.gz linux-stable-e8c2307e6a690db9aaff84153b2857c5c4dfd969.tar.bz2 linux-stable-e8c2307e6a690db9aaff84153b2857c5c4dfd969.zip |
scsi: mpt3sas: Add support IOCs new state named COREDUMP
New feature is added in HBA firmware where it copies the collected firmware
logs in flash region named 'CoreDump' whenever HBA firmware faults occur.
For copying the logs to CoreDump flash region firmware needs some time and
hence it has introduced a new IOC state named "CoreDump" State.
Whenever driver detects the CoreDump state then it means that some firmware
fault has occurred and firmware is copying the logs to the coredump flash
region. During this time driver should not perform any operation with the
HBA, driver should wait for HBA firmware to move the IOC state from
'CoreDump' state to 'Fault' state once it's done with copying the logs to
coredump region. Once driver detects the Fault state then it will issue the
diag reset/host reset operation to move the IOC state from Fault to
Operational state.
Here the valid IOC state transactions w.r.t to this CoreDump state feature,
Operational -> Fault:
The IOC transitions to the Fault state when an operational error occurs AND
CoreDump is not supported (or disabled) by the firmware(FW).
Operational -> CoreDump:
The IOC transitions to the CoreDump state when an operational error occurs
AND CoreDump is supported & enabled by the FW.
CoreDump -> Fault:
A transition from CoreDump state to Fault state happens when the FW
completes the CoreDump collection.
CoreDump -> Reset:
A transition out of the CoreDump state happens when the host sets the Reset
Adapter bit in the System Diagnostic Register (Hard Reset). This reset
action indicates that CoreDump took longer than the host time out.
Firmware informs the driver about the maximum time that driver has to wait
for firmware to transition the IOC state from 'CoreDump' to 'FAULT' state
through 'CoreDumpTOSec' field of ManufacturingPage11 page. if this
'CoreDumpTOSec' field value is zero then driver will wait for max 15
seconds.
Driver informs the HBA firmware that it supports this new IOC state named
'CoreDump' state by enabling COREDUMP_ENABLE flag in ConfigurationFlags
field of ioc init request message.
Current patch handles the CoreDump state only during HBA initialization and
release scenarios where watchdog thread (which polls the IOC state in every
one second) is disabled. Next subsequent patch handle the CoreDump state
when watchdog thread is enabled.
During HBA initialization or release execution time if driver detects the
CoreDump state then driver will wait for maximum CoreDumpTOSec value
seconds for FW to copy the logs. After that it will issue the diag reset
operation to move the IOC state to Operational state.
Link: https://lore.kernel.org/r/20191226111333.26131-5-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/mpt3sas')
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.c | 111 | ||||
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.h | 11 |
2 files changed, 118 insertions, 4 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 589b41dc5fa0..b753cd63f341 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -124,6 +124,9 @@ enum mpt3sas_perf_mode { }; static int +_base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, + u32 ioc_state, int timeout); +static int _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc); /** @@ -749,6 +752,49 @@ mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code) } /** + * mpt3sas_base_coredump_info - verbose translation of firmware CoreDump state + * @ioc: per adapter object + * @fault_code: fault code + * + * Return nothing. + */ +void +mpt3sas_base_coredump_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code) +{ + ioc_err(ioc, "coredump_state(0x%04x)!\n", fault_code); +} + +/** + * mpt3sas_base_wait_for_coredump_completion - Wait until coredump + * completes or times out + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_base_wait_for_coredump_completion(struct MPT3SAS_ADAPTER *ioc, + const char *caller) +{ + u8 timeout = (ioc->manu_pg11.CoreDumpTOSec) ? + ioc->manu_pg11.CoreDumpTOSec : + MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS; + + int ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_FAULT, + timeout); + + if (ioc_state) + ioc_err(ioc, + "%s: CoreDump timed out. (ioc_state=0x%x)\n", + caller, ioc_state); + else + ioc_info(ioc, + "%s: CoreDump completed. (ioc_state=0x%x)\n", + caller, ioc_state); + + return ioc_state; +} + +/** * mpt3sas_halt_firmware - halt's mpt controller firmware * @ioc: per adapter object * @@ -768,9 +814,14 @@ mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc) dump_stack(); doorbell = ioc->base_readl(&ioc->chip->Doorbell); - if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) - mpt3sas_base_fault_info(ioc , doorbell); - else { + if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt3sas_base_fault_info(ioc, doorbell & + MPI2_DOORBELL_DATA_MASK); + } else if ((doorbell & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_COREDUMP) { + mpt3sas_base_coredump_info(ioc, doorbell & + MPI2_DOORBELL_DATA_MASK); + } else { writel(0xC0FFEE00, &ioc->chip->Doorbell); ioc_err(ioc, "Firmware is halted due to command timeout\n"); } @@ -3209,6 +3260,12 @@ _base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc) mpt3sas_base_fault_info(ioc, ioc_state & MPI2_DOORBELL_DATA_MASK); rc = _base_diag_reset(ioc); + } else if ((ioc_state & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_COREDUMP) { + mpt3sas_base_coredump_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + mpt3sas_base_wait_for_coredump_completion(ioc, __func__); + rc = _base_diag_reset(ioc); } return rc; @@ -5447,6 +5504,8 @@ _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout) return 0; if (count && current_state == MPI2_IOC_STATE_FAULT) break; + if (count && current_state == MPI2_IOC_STATE_COREDUMP) + break; usleep_range(1000, 1500); count++; @@ -5551,6 +5610,11 @@ _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout) mpt3sas_base_fault_info(ioc , doorbell); return -EFAULT; } + if ((doorbell & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_COREDUMP) { + mpt3sas_base_coredump_info(ioc, doorbell); + return -EFAULT; + } } else if (int_status == 0xFFFFFFFF) goto out; @@ -5610,6 +5674,7 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout) { u32 ioc_state; int r = 0; + unsigned long flags; if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) { ioc_err(ioc, "%s: unknown reset_type\n", __func__); @@ -5628,6 +5693,7 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout) r = -EFAULT; goto out; } + ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout); if (ioc_state) { ioc_err(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n", @@ -5636,6 +5702,26 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout) goto out; } out: + if (r != 0) { + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + /* + * Wait for IOC state CoreDump to clear only during + * HBA initialization & release time. + */ + if ((ioc_state & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_COREDUMP && (ioc->is_driver_loading == 1 || + ioc->fault_reset_work_q == NULL)) { + spin_unlock_irqrestore( + &ioc->ioc_reset_in_progress_lock, flags); + mpt3sas_base_coredump_info(ioc, ioc_state); + mpt3sas_base_wait_for_coredump_completion(ioc, + __func__); + spin_lock_irqsave( + &ioc->ioc_reset_in_progress_lock, flags); + } + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + } ioc_info(ioc, "message unit reset: %s\n", r == 0 ? "SUCCESS" : "FAILED"); return r; @@ -6032,6 +6118,12 @@ _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout) mpt3sas_base_fault_info(ioc, ioc_state & MPI2_DOORBELL_DATA_MASK); goto issue_diag_reset; + } else if ((ioc_state & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_COREDUMP) { + ioc_info(ioc, + "%s: Skipping the diag reset here. (ioc_state=0x%x)\n", + __func__, ioc_state); + return -EFAULT; } ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout); @@ -6210,6 +6302,12 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc) cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma); } + /* + * Set the flag to enable CoreDump state feature in IOC firmware. + */ + mpi_request.ConfigurationFlags |= + cpu_to_le16(MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE); + /* This time stamp specifies number of milliseconds * since epoch ~ midnight January 1, 1970. */ @@ -6716,6 +6814,13 @@ _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type) goto issue_diag_reset; } + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_COREDUMP) { + mpt3sas_base_coredump_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + mpt3sas_base_wait_for_coredump_completion(ioc, __func__); + goto issue_diag_reset; + } + if (type == FORCE_BIG_HAMMER) goto issue_diag_reset; diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 83b8773d33ce..3f453e74bf20 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -90,6 +90,9 @@ #define MPT2SAS_BUILD_VERSION 0 #define MPT2SAS_RELEASE_VERSION 00 +/* CoreDump: Default timeout */ +#define MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS (15) /*15 seconds*/ + /* * Set MPT3SAS_SG_DEPTH value based on user input. */ @@ -399,7 +402,10 @@ struct Mpi2ManufacturingPage11_t { u8 HostTraceBufferFlags; /* 4Fh */ u16 HostTraceBufferMaxSizeKB; /* 50h */ u16 HostTraceBufferMinSizeKB; /* 52h */ - __le32 Reserved10[2]; /* 54h - 5Bh */ + u8 CoreDumpTOSec; /* 54h */ + u8 Reserved8; /* 55h */ + u16 Reserved9; /* 56h */ + __le32 Reserved10; /* 58h */ }; /** @@ -1538,6 +1544,9 @@ void *mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked); void mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code); +void mpt3sas_base_coredump_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code); +int mpt3sas_base_wait_for_coredump_completion(struct MPT3SAS_ADAPTER *ioc, + const char *caller); int mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, Mpi2SasIoUnitControlReply_t *mpi_reply, Mpi2SasIoUnitControlRequest_t *mpi_request); |