diff options
| author | Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> | 2022-10-11 11:50:35 +0530 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2022-10-19 14:34:35 +0100 |
| commit | 22742b8bbdd9fee1ae30be49c7e7e3becba96fc1 (patch) | |
| tree | f1d25bf9a267e9184d3f92cd29357230423b857b /drivers/spi/spi-zynqmp-gqspi.c | |
| parent | b3b953084b1bd0e74785bc5017444dd56952fb39 (diff) | |
| download | linux-stable-22742b8bbdd9fee1ae30be49c7e7e3becba96fc1.tar.gz linux-stable-22742b8bbdd9fee1ae30be49c7e7e3becba96fc1.tar.bz2 linux-stable-22742b8bbdd9fee1ae30be49c7e7e3becba96fc1.zip | |
spi: spi-zynqmp-gqspi: Set CPOL and CPHA during hardware init
During every transfer GQSPI driver writes the CPOL & CPHA values to the
configuration register. But the CPOL & CPHA values do not change in between
multiple transfers, so moved the CPOL & CPHA initialization to hardware
init so that the values are written only once.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://lore.kernel.org/r/20221011062040.12116-3-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-zynqmp-gqspi.c')
| -rw-r--r-- | drivers/spi/spi-zynqmp-gqspi.c | 32 |
1 files changed, 17 insertions, 15 deletions
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c index 973008a30a09..1b56dd29057f 100644 --- a/drivers/spi/spi-zynqmp-gqspi.c +++ b/drivers/spi/spi-zynqmp-gqspi.c @@ -266,7 +266,9 @@ static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr, * - Enable manual slave select * - Enable manual start * - Deselect all the chip select lines - * - Set the little endian mode of TX FIFO and + * - Set the little endian mode of TX FIFO + * - Set clock phase + * - Set clock polarity and * - Enable the QSPI controller */ static void zynqmp_qspi_init_hw(struct zynqmp_qspi *xqspi) @@ -305,10 +307,17 @@ static void zynqmp_qspi_init_hw(struct zynqmp_qspi *xqspi) config_reg |= GQSPI_CFG_WP_HOLD_MASK; /* Clear pre-scalar by default */ config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK; - /* CPHA 0 */ - config_reg &= ~GQSPI_CFG_CLK_PHA_MASK; - /* CPOL 0 */ - config_reg &= ~GQSPI_CFG_CLK_POL_MASK; + /* Set CPHA */ + if (xqspi->ctlr->mode_bits & SPI_CPHA) + config_reg |= GQSPI_CFG_CLK_PHA_MASK; + else + config_reg &= ~GQSPI_CFG_CLK_PHA_MASK; + /* Set CPOL */ + if (xqspi->ctlr->mode_bits & SPI_CPOL) + config_reg |= GQSPI_CFG_CLK_POL_MASK; + else + config_reg &= ~GQSPI_CFG_CLK_POL_MASK; + zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg); /* Clear the TX and RX FIFO */ @@ -470,14 +479,6 @@ static int zynqmp_qspi_config_op(struct zynqmp_qspi *xqspi, config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST); - /* Set the QSPI clock phase and clock polarity */ - config_reg &= (~GQSPI_CFG_CLK_PHA_MASK) & (~GQSPI_CFG_CLK_POL_MASK); - - if (qspi->mode & SPI_CPHA) - config_reg |= GQSPI_CFG_CLK_PHA_MASK; - if (qspi->mode & SPI_CPOL) - config_reg |= GQSPI_CFG_CLK_POL_MASK; - config_reg &= ~GQSPI_CFG_BAUD_RATE_DIV_MASK; config_reg |= (baud_rate_val << GQSPI_CFG_BAUD_RATE_DIV_SHIFT); zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg); @@ -1170,6 +1171,9 @@ static int zynqmp_qspi_probe(struct platform_device *pdev) goto clk_dis_all; } + ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD | + SPI_TX_DUAL | SPI_TX_QUAD; + /* QSPI controller initializations */ zynqmp_qspi_init_hw(xqspi); @@ -1207,8 +1211,6 @@ static int zynqmp_qspi_probe(struct platform_device *pdev) ctlr->setup = zynqmp_qspi_setup_op; ctlr->max_speed_hz = clk_get_rate(xqspi->refclk) / 2; ctlr->bits_per_word_mask = SPI_BPW_MASK(8); - ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD | - SPI_TX_DUAL | SPI_TX_QUAD; ctlr->dev.of_node = np; ctlr->auto_runtime_pm = true; |