media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci

Deprecate the hexium_gemini, hexium_orion, mxb and ttpci saa7146-based
drivers: these drivers do not use the vb2 framework for video streaming,
instead it uses the old videobuf framework.

We want to get rid of these old drivers, so deprecated these for future
removal.

[hverkuil: update MAINTAINERS file]

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

26 files changed, 12028 insertions, 0 deletions

diff --git a/drivers/staging/media/deprecated/saa7146/Kconfig b/drivers/staging/media/deprecated/saa7146/Kconfig
new file mode 100644
index 000000000000..d0cb52164ff8
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/Kconfig
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+source "drivers/staging/media/deprecated/saa7146/common/Kconfig"
+source "drivers/staging/media/deprecated/saa7146/saa7146/Kconfig"
+source "drivers/staging/media/deprecated/saa7146/ttpci/Kconfig"
diff --git a/drivers/staging/media/deprecated/saa7146/Makefile b/drivers/staging/media/deprecated/saa7146/Makefile
new file mode 100644
index 000000000000..9d99fdedf813
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/Makefile
@@ -0,0 +1,2 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+obj-y += common/ saa7146/ ttpci/
diff --git a/drivers/staging/media/deprecated/saa7146/common/Kconfig b/drivers/staging/media/deprecated/saa7146/common/Kconfig
new file mode 100644
index 000000000000..a0aa155e5d85
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_SAA7146
+	tristate
+	depends on I2C && PCI
+
+config VIDEO_SAA7146_VV
+	tristate
+	depends on VIDEO_DEV
+	select VIDEOBUF_DMA_SG
+	select VIDEO_SAA7146
diff --git a/drivers/staging/media/deprecated/saa7146/common/Makefile b/drivers/staging/media/deprecated/saa7146/common/Makefile
new file mode 100644
index 000000000000..2a6337feaec8
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+saa7146-objs    := saa7146_i2c.o saa7146_core.o
+saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o
+
+obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o
+obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146.h b/drivers/staging/media/deprecated/saa7146/common/saa7146.h
new file mode 100644
index 000000000000..71ce63c99cb4
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/saa7146.h
@@ -0,0 +1,472 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SAA7146__
+#define __SAA7146__
+
+#include <linux/delay.h>	/* for delay-stuff */
+#include <linux/slab.h>		/* for kmalloc/kfree */
+#include <linux/pci.h>		/* for pci-config-stuff, vendor ids etc. */
+#include <linux/init.h>		/* for "__init" */
+#include <linux/interrupt.h>	/* for IMMEDIATE_BH */
+#include <linux/kmod.h>		/* for kernel module loader */
+#include <linux/i2c.h>		/* for i2c subsystem */
+#include <asm/io.h>		/* for accessing devices */
+#include <linux/stringify.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+
+#include <linux/vmalloc.h>	/* for vmalloc() */
+#include <linux/mm.h>		/* for vmalloc_to_page() */
+
+#define saa7146_write(sxy,adr,dat)    writel((dat),(sxy->mem+(adr)))
+#define saa7146_read(sxy,adr)         readl(sxy->mem+(adr))
+
+extern unsigned int saa7146_debug;
+
+#ifndef DEBUG_VARIABLE
+	#define DEBUG_VARIABLE saa7146_debug
+#endif
+
+#define ERR(fmt, ...)	pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define _DBG(mask, fmt, ...)						\
+do {									\
+	if (DEBUG_VARIABLE & mask)					\
+		pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__);	\
+} while (0)
+
+/* simple debug messages */
+#define DEB_S(fmt, ...)		_DBG(0x01, fmt, ##__VA_ARGS__)
+/* more detailed debug messages */
+#define DEB_D(fmt, ...)		_DBG(0x02, fmt, ##__VA_ARGS__)
+/* print enter and exit of functions */
+#define DEB_EE(fmt, ...)	_DBG(0x04, fmt, ##__VA_ARGS__)
+/* i2c debug messages */
+#define DEB_I2C(fmt, ...)	_DBG(0x08, fmt, ##__VA_ARGS__)
+/* vbi debug messages */
+#define DEB_VBI(fmt, ...)	_DBG(0x10, fmt, ##__VA_ARGS__)
+/* interrupt debug messages */
+#define DEB_INT(fmt, ...)	_DBG(0x20, fmt, ##__VA_ARGS__)
+/* capture debug messages */
+#define DEB_CAP(fmt, ...)	_DBG(0x40, fmt, ##__VA_ARGS__)
+
+#define SAA7146_ISR_CLEAR(x,y) \
+	saa7146_write(x, ISR, (y));
+
+struct module;
+
+struct saa7146_dev;
+struct saa7146_extension;
+struct saa7146_vv;
+
+/* saa7146 page table */
+struct saa7146_pgtable {
+	unsigned int	size;
+	__le32		*cpu;
+	dma_addr_t	dma;
+	/* used for offsets for u,v planes for planar capture modes */
+	unsigned long	offset;
+	/* used for custom pagetables (used for example by budget dvb cards) */
+	struct scatterlist *slist;
+	int		nents;
+};
+
+struct saa7146_pci_extension_data {
+	struct saa7146_extension *ext;
+	void *ext_priv;			/* most likely a name string */
+};
+
+#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device)		\
+	{							\
+		.vendor    = PCI_VENDOR_ID_PHILIPS,		\
+		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,	\
+		.subvendor = x_vendor,				\
+		.subdevice = x_device,				\
+		.driver_data = (unsigned long)& x_var,		\
+	}
+
+struct saa7146_extension
+{
+	char	name[32];		/* name of the device */
+#define SAA7146_USE_I2C_IRQ	0x1
+#define SAA7146_I2C_SHORT_DELAY	0x2
+	int	flags;
+
+	/* pairs of subvendor and subdevice ids for
+	   supported devices, last entry 0xffff, 0xfff */
+	struct module *module;
+	struct pci_driver driver;
+	const struct pci_device_id *pci_tbl;
+
+	/* extension functions */
+	int (*probe)(struct saa7146_dev *);
+	int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
+	int (*detach)(struct saa7146_dev*);
+
+	u32	irq_mask;	/* mask to indicate, which irq-events are handled by the extension */
+	void	(*irq_func)(struct saa7146_dev*, u32* irq_mask);
+};
+
+struct saa7146_dma
+{
+	dma_addr_t	dma_handle;
+	__le32		*cpu_addr;
+};
+
+struct saa7146_dev
+{
+	struct module			*module;
+
+	struct v4l2_device		v4l2_dev;
+	struct v4l2_ctrl_handler	ctrl_handler;
+
+	/* different device locks */
+	spinlock_t			slock;
+	struct mutex			v4l2_lock;
+
+	unsigned char			__iomem *mem;		/* pointer to mapped IO memory */
+	u32				revision;	/* chip revision; needed for bug-workarounds*/
+
+	/* pci-device & irq stuff*/
+	char				name[32];
+	struct pci_dev			*pci;
+	u32				int_todo;
+	spinlock_t			int_slock;
+
+	/* extension handling */
+	struct saa7146_extension	*ext;		/* indicates if handled by extension */
+	void				*ext_priv;	/* pointer for extension private use (most likely some private data) */
+	struct saa7146_ext_vv		*ext_vv_data;
+
+	/* per device video/vbi information (if available) */
+	struct saa7146_vv	*vv_data;
+	void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
+
+	/* i2c-stuff */
+	struct mutex			i2c_lock;
+
+	u32				i2c_bitrate;
+	struct saa7146_dma		d_i2c;	/* pointer to i2c memory */
+	wait_queue_head_t		i2c_wq;
+	int				i2c_op;
+
+	/* memories */
+	struct saa7146_dma		d_rps0;
+	struct saa7146_dma		d_rps1;
+};
+
+static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev);
+}
+
+/* from saa7146_i2c.c */
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
+
+/* from saa7146_core.c */
+int saa7146_register_extension(struct saa7146_extension*);
+int saa7146_unregister_extension(struct saa7146_extension*);
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
+int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
+void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
+int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
+void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt);
+void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
+
+/* some memory sizes */
+#define SAA7146_I2C_MEM		( 1*PAGE_SIZE)
+#define SAA7146_RPS_MEM		( 1*PAGE_SIZE)
+
+/* some i2c constants */
+#define SAA7146_I2C_TIMEOUT	100	/* i2c-timeout-value in ms */
+#define SAA7146_I2C_RETRIES	3	/* how many times shall we retry an i2c-operation? */
+#define SAA7146_I2C_DELAY	5	/* time we wait after certain i2c-operations */
+
+/* unsorted defines */
+#define ME1    0x0000000800
+#define PV1    0x0000000008
+
+/* gpio defines */
+#define SAA7146_GPIO_INPUT 0x00
+#define SAA7146_GPIO_IRQHI 0x10
+#define SAA7146_GPIO_IRQLO 0x20
+#define SAA7146_GPIO_IRQHL 0x30
+#define SAA7146_GPIO_OUTLO 0x40
+#define SAA7146_GPIO_OUTHI 0x50
+
+/* debi defines */
+#define DEBINOSWAP 0x000e0000
+
+/* define for the register programming sequencer (rps) */
+#define CMD_NOP		0x00000000  /* No operation */
+#define CMD_CLR_EVENT	0x00000000  /* Clear event */
+#define CMD_SET_EVENT	0x10000000  /* Set signal event */
+#define CMD_PAUSE	0x20000000  /* Pause */
+#define CMD_CHECK_LATE	0x30000000  /* Check late */
+#define CMD_UPLOAD	0x40000000  /* Upload */
+#define CMD_STOP	0x50000000  /* Stop */
+#define CMD_INTERRUPT	0x60000000  /* Interrupt */
+#define CMD_JUMP	0x80000000  /* Jump */
+#define CMD_WR_REG	0x90000000  /* Write (load) register */
+#define CMD_RD_REG	0xa0000000  /* Read (store) register */
+#define CMD_WR_REG_MASK	0xc0000000  /* Write register with mask */
+
+#define CMD_OAN		MASK_27
+#define CMD_INV		MASK_26
+#define CMD_SIG4	MASK_25
+#define CMD_SIG3	MASK_24
+#define CMD_SIG2	MASK_23
+#define CMD_SIG1	MASK_22
+#define CMD_SIG0	MASK_21
+#define CMD_O_FID_B	MASK_14
+#define CMD_E_FID_B	MASK_13
+#define CMD_O_FID_A	MASK_12
+#define CMD_E_FID_A	MASK_11
+
+/* some events and command modifiers for rps1 squarewave generator */
+#define EVT_HS          (1<<15)     // Source Line Threshold reached
+#define EVT_VBI_B       (1<<9)      // VSYNC Event
+#define RPS_OAN         (1<<27)     // 1: OR events, 0: AND events
+#define RPS_INV         (1<<26)     // Invert (compound) event
+#define GPIO3_MSK       0xFF000000  // GPIO #3 control bits
+
+/* Bit mask constants */
+#define MASK_00   0x00000001    /* Mask value for bit 0 */
+#define MASK_01   0x00000002    /* Mask value for bit 1 */
+#define MASK_02   0x00000004    /* Mask value for bit 2 */
+#define MASK_03   0x00000008    /* Mask value for bit 3 */
+#define MASK_04   0x00000010    /* Mask value for bit 4 */
+#define MASK_05   0x00000020    /* Mask value for bit 5 */
+#define MASK_06   0x00000040    /* Mask value for bit 6 */
+#define MASK_07   0x00000080    /* Mask value for bit 7 */
+#define MASK_08   0x00000100    /* Mask value for bit 8 */
+#define MASK_09   0x00000200    /* Mask value for bit 9 */
+#define MASK_10   0x00000400    /* Mask value for bit 10 */
+#define MASK_11   0x00000800    /* Mask value for bit 11 */
+#define MASK_12   0x00001000    /* Mask value for bit 12 */
+#define MASK_13   0x00002000    /* Mask value for bit 13 */
+#define MASK_14   0x00004000    /* Mask value for bit 14 */
+#define MASK_15   0x00008000    /* Mask value for bit 15 */
+#define MASK_16   0x00010000    /* Mask value for bit 16 */
+#define MASK_17   0x00020000    /* Mask value for bit 17 */
+#define MASK_18   0x00040000    /* Mask value for bit 18 */
+#define MASK_19   0x00080000    /* Mask value for bit 19 */
+#define MASK_20   0x00100000    /* Mask value for bit 20 */
+#define MASK_21   0x00200000    /* Mask value for bit 21 */
+#define MASK_22   0x00400000    /* Mask value for bit 22 */
+#define MASK_23   0x00800000    /* Mask value for bit 23 */
+#define MASK_24   0x01000000    /* Mask value for bit 24 */
+#define MASK_25   0x02000000    /* Mask value for bit 25 */
+#define MASK_26   0x04000000    /* Mask value for bit 26 */
+#define MASK_27   0x08000000    /* Mask value for bit 27 */
+#define MASK_28   0x10000000    /* Mask value for bit 28 */
+#define MASK_29   0x20000000    /* Mask value for bit 29 */
+#define MASK_30   0x40000000    /* Mask value for bit 30 */
+#define MASK_31   0x80000000    /* Mask value for bit 31 */
+
+#define MASK_B0   0x000000ff    /* Mask value for byte 0 */
+#define MASK_B1   0x0000ff00    /* Mask value for byte 1 */
+#define MASK_B2   0x00ff0000    /* Mask value for byte 2 */
+#define MASK_B3   0xff000000    /* Mask value for byte 3 */
+
+#define MASK_W0   0x0000ffff    /* Mask value for word 0 */
+#define MASK_W1   0xffff0000    /* Mask value for word 1 */
+
+#define MASK_PA   0xfffffffc    /* Mask value for physical address */
+#define MASK_PR   0xfffffffe	/* Mask value for protection register */
+#define MASK_ER   0xffffffff    /* Mask value for the entire register */
+
+#define MASK_NONE 0x00000000    /* No mask */
+
+/* register aliases */
+#define BASE_ODD1         0x00  /* Video DMA 1 registers  */
+#define BASE_EVEN1        0x04
+#define PROT_ADDR1        0x08
+#define PITCH1            0x0C
+#define BASE_PAGE1        0x10  /* Video DMA 1 base page */
+#define NUM_LINE_BYTE1    0x14
+
+#define BASE_ODD2         0x18  /* Video DMA 2 registers */
+#define BASE_EVEN2        0x1C
+#define PROT_ADDR2        0x20
+#define PITCH2            0x24
+#define BASE_PAGE2        0x28  /* Video DMA 2 base page */
+#define NUM_LINE_BYTE2    0x2C
+
+#define BASE_ODD3         0x30  /* Video DMA 3 registers */
+#define BASE_EVEN3        0x34
+#define PROT_ADDR3        0x38
+#define PITCH3            0x3C
+#define BASE_PAGE3        0x40  /* Video DMA 3 base page */
+#define NUM_LINE_BYTE3    0x44
+
+#define PCI_BT_V1         0x48  /* Video/FIFO 1 */
+#define PCI_BT_V2         0x49  /* Video/FIFO 2 */
+#define PCI_BT_V3         0x4A  /* Video/FIFO 3 */
+#define PCI_BT_DEBI       0x4B  /* DEBI */
+#define PCI_BT_A          0x4C  /* Audio */
+
+#define DD1_INIT          0x50  /* Init setting of DD1 interface */
+
+#define DD1_STREAM_B      0x54  /* DD1 B video data stream handling */
+#define DD1_STREAM_A      0x56  /* DD1 A video data stream handling */
+
+#define BRS_CTRL          0x58  /* BRS control register */
+#define HPS_CTRL          0x5C  /* HPS control register */
+#define HPS_V_SCALE       0x60  /* HPS vertical scale */
+#define HPS_V_GAIN        0x64  /* HPS vertical ACL and gain */
+#define HPS_H_PRESCALE    0x68  /* HPS horizontal prescale   */
+#define HPS_H_SCALE       0x6C  /* HPS horizontal scale */
+#define BCS_CTRL          0x70  /* BCS control */
+#define CHROMA_KEY_RANGE  0x74
+#define CLIP_FORMAT_CTRL  0x78  /* HPS outputs formats & clipping */
+
+#define DEBI_CONFIG       0x7C
+#define DEBI_COMMAND      0x80
+#define DEBI_PAGE         0x84
+#define DEBI_AD           0x88
+
+#define I2C_TRANSFER      0x8C
+#define I2C_STATUS        0x90
+
+#define BASE_A1_IN        0x94	/* Audio 1 input DMA */
+#define PROT_A1_IN        0x98
+#define PAGE_A1_IN        0x9C
+
+#define BASE_A1_OUT       0xA0  /* Audio 1 output DMA */
+#define PROT_A1_OUT       0xA4
+#define PAGE_A1_OUT       0xA8
+
+#define BASE_A2_IN        0xAC  /* Audio 2 input DMA */
+#define PROT_A2_IN        0xB0
+#define PAGE_A2_IN        0xB4
+
+#define BASE_A2_OUT       0xB8  /* Audio 2 output DMA */
+#define PROT_A2_OUT       0xBC
+#define PAGE_A2_OUT       0xC0
+
+#define RPS_PAGE0         0xC4  /* RPS task 0 page register */
+#define RPS_PAGE1         0xC8  /* RPS task 1 page register */
+
+#define RPS_THRESH0       0xCC  /* HBI threshold for task 0 */
+#define RPS_THRESH1       0xD0  /* HBI threshold for task 1 */
+
+#define RPS_TOV0          0xD4  /* RPS timeout for task 0 */
+#define RPS_TOV1          0xD8  /* RPS timeout for task 1 */
+
+#define IER               0xDC  /* Interrupt enable register */
+
+#define GPIO_CTRL         0xE0  /* GPIO 0-3 register */
+
+#define EC1SSR            0xE4  /* Event cnt set 1 source select */
+#define EC2SSR            0xE8  /* Event cnt set 2 source select */
+#define ECT1R             0xEC  /* Event cnt set 1 thresholds */
+#define ECT2R             0xF0  /* Event cnt set 2 thresholds */
+
+#define ACON1             0xF4
+#define ACON2             0xF8
+
+#define MC1               0xFC   /* Main control register 1 */
+#define MC2               0x100  /* Main control register 2  */
+
+#define RPS_ADDR0         0x104  /* RPS task 0 address register */
+#define RPS_ADDR1         0x108  /* RPS task 1 address register */
+
+#define ISR               0x10C  /* Interrupt status register */
+#define PSR               0x110  /* Primary status register */
+#define SSR               0x114  /* Secondary status register */
+
+#define EC1R              0x118  /* Event counter set 1 register */
+#define EC2R              0x11C  /* Event counter set 2 register */
+
+#define PCI_VDP1          0x120  /* Video DMA pointer of FIFO 1 */
+#define PCI_VDP2          0x124  /* Video DMA pointer of FIFO 2 */
+#define PCI_VDP3          0x128  /* Video DMA pointer of FIFO 3 */
+#define PCI_ADP1          0x12C  /* Audio DMA pointer of audio out 1 */
+#define PCI_ADP2          0x130  /* Audio DMA pointer of audio in 1 */
+#define PCI_ADP3          0x134  /* Audio DMA pointer of audio out 2 */
+#define PCI_ADP4          0x138  /* Audio DMA pointer of audio in 2 */
+#define PCI_DMA_DDP       0x13C  /* DEBI DMA pointer */
+
+#define LEVEL_REP         0x140,
+#define A_TIME_SLOT1      0x180,  /* from 180 - 1BC */
+#define A_TIME_SLOT2      0x1C0,  /* from 1C0 - 1FC */
+
+/* isr masks */
+#define SPCI_PPEF       0x80000000  /* PCI parity error */
+#define SPCI_PABO       0x40000000  /* PCI access error (target or master abort) */
+#define SPCI_PPED       0x20000000  /* PCI parity error on 'real time data' */
+#define SPCI_RPS_I1     0x10000000  /* Interrupt issued by RPS1 */
+#define SPCI_RPS_I0     0x08000000  /* Interrupt issued by RPS0 */
+#define SPCI_RPS_LATE1  0x04000000  /* RPS task 1 is late */
+#define SPCI_RPS_LATE0  0x02000000  /* RPS task 0 is late */
+#define SPCI_RPS_E1     0x01000000  /* RPS error from task 1 */
+#define SPCI_RPS_E0     0x00800000  /* RPS error from task 0 */
+#define SPCI_RPS_TO1    0x00400000  /* RPS timeout task 1 */
+#define SPCI_RPS_TO0    0x00200000  /* RPS timeout task 0 */
+#define SPCI_UPLD       0x00100000  /* RPS in upload */
+#define SPCI_DEBI_S     0x00080000  /* DEBI status */
+#define SPCI_DEBI_E     0x00040000  /* DEBI error */
+#define SPCI_IIC_S      0x00020000  /* I2C status */
+#define SPCI_IIC_E      0x00010000  /* I2C error */
+#define SPCI_A2_IN      0x00008000  /* Audio 2 input DMA protection / limit */
+#define SPCI_A2_OUT     0x00004000  /* Audio 2 output DMA protection / limit */
+#define SPCI_A1_IN      0x00002000  /* Audio 1 input DMA protection / limit */
+#define SPCI_A1_OUT     0x00001000  /* Audio 1 output DMA protection / limit */
+#define SPCI_AFOU       0x00000800  /* Audio FIFO over- / underflow */
+#define SPCI_V_PE       0x00000400  /* Video protection address */
+#define SPCI_VFOU       0x00000200  /* Video FIFO over- / underflow */
+#define SPCI_FIDA       0x00000100  /* Field ID video port A */
+#define SPCI_FIDB       0x00000080  /* Field ID video port B */
+#define SPCI_PIN3       0x00000040  /* GPIO pin 3 */
+#define SPCI_PIN2       0x00000020  /* GPIO pin 2 */
+#define SPCI_PIN1       0x00000010  /* GPIO pin 1 */
+#define SPCI_PIN0       0x00000008  /* GPIO pin 0 */
+#define SPCI_ECS        0x00000004  /* Event counter 1, 2, 4, 5 */
+#define SPCI_EC3S       0x00000002  /* Event counter 3 */
+#define SPCI_EC0S       0x00000001  /* Event counter 0 */
+
+/* i2c */
+#define	SAA7146_I2C_ABORT	(1<<7)
+#define	SAA7146_I2C_SPERR	(1<<6)
+#define	SAA7146_I2C_APERR	(1<<5)
+#define	SAA7146_I2C_DTERR	(1<<4)
+#define	SAA7146_I2C_DRERR	(1<<3)
+#define	SAA7146_I2C_AL		(1<<2)
+#define	SAA7146_I2C_ERR		(1<<1)
+#define	SAA7146_I2C_BUSY	(1<<0)
+
+#define	SAA7146_I2C_START	(0x3)
+#define	SAA7146_I2C_CONT	(0x2)
+#define	SAA7146_I2C_STOP	(0x1)
+#define	SAA7146_I2C_NOP		(0x0)
+
+#define SAA7146_I2C_BUS_BIT_RATE_6400	(0x500)
+#define SAA7146_I2C_BUS_BIT_RATE_3200	(0x100)
+#define SAA7146_I2C_BUS_BIT_RATE_480	(0x400)
+#define SAA7146_I2C_BUS_BIT_RATE_320	(0x600)
+#define SAA7146_I2C_BUS_BIT_RATE_240	(0x700)
+#define SAA7146_I2C_BUS_BIT_RATE_120	(0x000)
+#define SAA7146_I2C_BUS_BIT_RATE_80	(0x200)
+#define SAA7146_I2C_BUS_BIT_RATE_60	(0x300)
+
+static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&x->int_slock, flags);
+	saa7146_write(x, IER, saa7146_read(x, IER) & ~y);
+	spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&x->int_slock, flags);
+	saa7146_write(x, IER, saa7146_read(x, IER) | y);
+	spin_unlock_irqrestore(&x->int_slock, flags);
+}
+
+#endif
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_core.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_core.c
new file mode 100644
index 000000000000..da21d346b870
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/saa7146_core.c
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    saa7146.o - driver for generic saa7146-based hardware
+
+    Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include "saa7146.h"
+
+static int saa7146_num;
+
+unsigned int saa7146_debug;
+
+module_param(saa7146_debug, uint, 0644);
+MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)");
+
+#if 0
+static void dump_registers(struct saa7146_dev* dev)
+{
+	int i = 0;
+
+	pr_info(" @ %li jiffies:\n", jiffies);
+	for (i = 0; i <= 0x148; i += 4)
+		pr_info("0x%03x: 0x%08x\n", i, saa7146_read(dev, i));
+}
+#endif
+
+/****************************************************************************
+ * gpio and debi helper functions
+ ****************************************************************************/
+
+void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data)
+{
+	u32 value = 0;
+
+	BUG_ON(port > 3);
+
+	value = saa7146_read(dev, GPIO_CTRL);
+	value &= ~(0xff << (8*port));
+	value |= (data << (8*port));
+	saa7146_write(dev, GPIO_CTRL, value);
+}
+
+/* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
+static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
+{
+	unsigned long timeout;
+	int err;
+
+	/* wait for registers to be programmed */
+	timeout = jiffies + usecs_to_jiffies(us1);
+	while (1) {
+		err = time_after(jiffies, timeout);
+		if (saa7146_read(dev, MC2) & 2)
+			break;
+		if (err) {
+			pr_debug("%s: %s timed out while waiting for registers getting programmed\n",
+			       dev->name, __func__);
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+	}
+
+	/* wait for transfer to complete */
+	timeout = jiffies + usecs_to_jiffies(us2);
+	while (1) {
+		err = time_after(jiffies, timeout);
+		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+			break;
+		saa7146_read(dev, MC2);
+		if (err) {
+			DEB_S("%s: %s timed out while waiting for transfer completion\n",
+			      dev->name, __func__);
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+	}
+
+	return 0;
+}
+
+static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
+{
+	unsigned long loops;
+
+	/* wait for registers to be programmed */
+	loops = us1;
+	while (1) {
+		if (saa7146_read(dev, MC2) & 2)
+			break;
+		if (!loops--) {
+			pr_err("%s: %s timed out while waiting for registers getting programmed\n",
+			       dev->name, __func__);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	/* wait for transfer to complete */
+	loops = us2 / 5;
+	while (1) {
+		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+			break;
+		saa7146_read(dev, MC2);
+		if (!loops--) {
+			DEB_S("%s: %s timed out while waiting for transfer completion\n",
+			      dev->name, __func__);
+			return -ETIMEDOUT;
+		}
+		udelay(5);
+	}
+
+	return 0;
+}
+
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+{
+	if (nobusyloop)
+		return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000);
+	else
+		return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000);
+}
+
+/****************************************************************************
+ * general helper functions
+ ****************************************************************************/
+
+/* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c
+   make sure virt has been allocated with vmalloc_32(), otherwise the BUG()
+   may be triggered on highmem machines */
+static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages)
+{
+	struct scatterlist *sglist;
+	struct page *pg;
+	int i;
+
+	sglist = kmalloc_array(nr_pages, sizeof(struct scatterlist), GFP_KERNEL);
+	if (NULL == sglist)
+		return NULL;
+	sg_init_table(sglist, nr_pages);
+	for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
+		pg = vmalloc_to_page(virt);
+		if (NULL == pg)
+			goto err;
+		BUG_ON(PageHighMem(pg));
+		sg_set_page(&sglist[i], pg, PAGE_SIZE, 0);
+	}
+	return sglist;
+
+ err:
+	kfree(sglist);
+	return NULL;
+}
+
+/********************************************************************************/
+/* common page table functions */
+
+void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt)
+{
+	int pages = (length+PAGE_SIZE-1)/PAGE_SIZE;
+	void *mem = vmalloc_32(length);
+	int slen = 0;
+
+	if (NULL == mem)
+		goto err_null;
+
+	if (!(pt->slist = vmalloc_to_sg(mem, pages)))
+		goto err_free_mem;
+
+	if (saa7146_pgtable_alloc(pci, pt))
+		goto err_free_slist;
+
+	pt->nents = pages;
+	slen = dma_map_sg(&pci->dev, pt->slist, pt->nents, DMA_FROM_DEVICE);
+	if (0 == slen)
+		goto err_free_pgtable;
+
+	if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen))
+		goto err_unmap_sg;
+
+	return mem;
+
+err_unmap_sg:
+	dma_unmap_sg(&pci->dev, pt->slist, pt->nents, DMA_FROM_DEVICE);
+err_free_pgtable:
+	saa7146_pgtable_free(pci, pt);
+err_free_slist:
+	kfree(pt->slist);
+	pt->slist = NULL;
+err_free_mem:
+	vfree(mem);
+err_null:
+	return NULL;
+}
+
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt)
+{
+	dma_unmap_sg(&pci->dev, pt->slist, pt->nents, DMA_FROM_DEVICE);
+	saa7146_pgtable_free(pci, pt);
+	kfree(pt->slist);
+	pt->slist = NULL;
+	vfree(mem);
+}
+
+void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt)
+{
+	if (NULL == pt->cpu)
+		return;
+	dma_free_coherent(&pci->dev, pt->size, pt->cpu, pt->dma);
+	pt->cpu = NULL;
+}
+
+int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
+{
+	__le32       *cpu;
+	dma_addr_t   dma_addr = 0;
+
+	cpu = dma_alloc_coherent(&pci->dev, PAGE_SIZE, &dma_addr, GFP_KERNEL);
+	if (NULL == cpu) {
+		return -ENOMEM;
+	}
+	pt->size = PAGE_SIZE;
+	pt->cpu  = cpu;
+	pt->dma  = dma_addr;
+
+	return 0;
+}
+
+int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt,
+	struct scatterlist *list, int sglen  )
+{
+	__le32 *ptr, fill;
+	int nr_pages = 0;
+	int i,p;
+
+	BUG_ON(0 == sglen);
+	BUG_ON(list->offset > PAGE_SIZE);
+
+	/* if we have a user buffer, the first page may not be
+	   aligned to a page boundary. */
+	pt->offset = list->offset;
+
+	ptr = pt->cpu;
+	for (i = 0; i < sglen; i++, list++) {
+/*
+		pr_debug("i:%d, adr:0x%08x, len:%d, offset:%d\n",
+			 i, sg_dma_address(list), sg_dma_len(list),
+			 list->offset);
+*/
+		for (p = 0; p * 4096 < sg_dma_len(list); p++, ptr++) {
+			*ptr = cpu_to_le32(sg_dma_address(list) + p * 4096);
+			nr_pages++;
+		}
+	}
+
+
+	/* safety; fill the page table up with the last valid page */
+	fill = *(ptr-1);
+	for(i=nr_pages;i<1024;i++) {
+		*ptr++ = fill;
+	}
+
+/*
+	ptr = pt->cpu;
+	pr_debug("offset: %d\n", pt->offset);
+	for(i=0;i<5;i++) {
+		pr_debug("ptr1 %d: 0x%08x\n", i, ptr[i]);
+	}
+*/
+	return 0;
+}
+
+/********************************************************************************/
+/* interrupt handler */
+static irqreturn_t interrupt_hw(int irq, void *dev_id)
+{
+	struct saa7146_dev *dev = dev_id;
+	u32 isr;
+	u32 ack_isr;
+
+	/* read out the interrupt status register */
+	ack_isr = isr = saa7146_read(dev, ISR);
+
+	/* is this our interrupt? */
+	if ( 0 == isr ) {
+		/* nope, some other device */
+		return IRQ_NONE;
+	}
+
+	if (dev->ext) {
+		if (dev->ext->irq_mask & isr) {
+			if (dev->ext->irq_func)
+				dev->ext->irq_func(dev, &isr);
+			isr &= ~dev->ext->irq_mask;
+		}
+	}
+	if (0 != (isr & (MASK_27))) {
+		DEB_INT("irq: RPS0 (0x%08x)\n", isr);
+		if (dev->vv_data && dev->vv_callback)
+			dev->vv_callback(dev,isr);
+		isr &= ~MASK_27;
+	}
+	if (0 != (isr & (MASK_28))) {
+		if (dev->vv_data && dev->vv_callback)
+			dev->vv_callback(dev,isr);
+		isr &= ~MASK_28;
+	}
+	if (0 != (isr & (MASK_16|MASK_17))) {
+		SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
+		/* only wake up if we expect something */
+		if (0 != dev->i2c_op) {
+			dev->i2c_op = 0;
+			wake_up(&dev->i2c_wq);
+		} else {
+			u32 psr = saa7146_read(dev, PSR);
+			u32 ssr = saa7146_read(dev, SSR);
+			pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n",
+				dev->name, isr, psr, ssr);
+		}
+		isr &= ~(MASK_16|MASK_17);
+	}
+	if( 0 != isr ) {
+		ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n",
+		    isr);
+		ERR("disabling interrupt source(s)!\n");
+		SAA7146_IER_DISABLE(dev,isr);
+	}
+	saa7146_write(dev, ISR, ack_isr);
+	return IRQ_HANDLED;
+}
+
+/*********************************************************************************/
+/* configuration-functions                                                       */
+
+static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent)
+{
+	struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data;
+	struct saa7146_extension *ext = pci_ext->ext;
+	struct saa7146_dev *dev;
+	int err = -ENOMEM;
+
+	/* clear out mem for sure */
+	dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL);
+	if (!dev) {
+		ERR("out of memory\n");
+		goto out;
+	}
+
+	/* create a nice device name */
+	sprintf(dev->name, "saa7146 (%d)", saa7146_num);
+
+	DEB_EE("pci:%p\n", pci);
+
+	err = pci_enable_device(pci);
+	if (err < 0) {
+		ERR("pci_enable_device() failed\n");
+		goto err_free;
+	}
+
+	/* enable bus-mastering */
+	pci_set_master(pci);
+
+	dev->pci = pci;
+
+	/* get chip-revision; this is needed to enable bug-fixes */
+	dev->revision = pci->revision;
+
+	/* remap the memory from virtual to physical address */
+
+	err = pci_request_region(pci, 0, "saa7146");
+	if (err < 0)
+		goto err_disable;
+
+	dev->mem = ioremap(pci_resource_start(pci, 0),
+			   pci_resource_len(pci, 0));
+	if (!dev->mem) {
+		ERR("ioremap() failed\n");
+		err = -ENODEV;
+		goto err_release;
+	}
+
+	/* we don't do a master reset here anymore, it screws up
+	   some boards that don't have an i2c-eeprom for configuration
+	   values */
+/*
+	saa7146_write(dev, MC1, MASK_31);
+*/
+
+	/* disable all irqs */
+	saa7146_write(dev, IER, 0);
+
+	/* shut down all dma transfers and rps tasks */
+	saa7146_write(dev, MC1, 0x30ff0000);
+
+	/* clear out any rps-signals pending */
+	saa7146_write(dev, MC2, 0xf8000000);
+
+	/* request an interrupt for the saa7146 */
+	err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED,
+			  dev->name, dev);
+	if (err < 0) {
+		ERR("request_irq() failed\n");
+		goto err_unmap;
+	}
+
+	err = -ENOMEM;
+
+	/* get memory for various stuff */
+	dev->d_rps0.cpu_addr = dma_alloc_coherent(&pci->dev, SAA7146_RPS_MEM,
+						  &dev->d_rps0.dma_handle,
+						  GFP_KERNEL);
+	if (!dev->d_rps0.cpu_addr)
+		goto err_free_irq;
+
+	dev->d_rps1.cpu_addr = dma_alloc_coherent(&pci->dev, SAA7146_RPS_MEM,
+						  &dev->d_rps1.dma_handle,
+						  GFP_KERNEL);
+	if (!dev->d_rps1.cpu_addr)
+		goto err_free_rps0;
+
+	dev->d_i2c.cpu_addr = dma_alloc_coherent(&pci->dev, SAA7146_RPS_MEM,
+						 &dev->d_i2c.dma_handle, GFP_KERNEL);
+	if (!dev->d_i2c.cpu_addr)
+		goto err_free_rps1;
+
+	/* the rest + print status message */
+
+	pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n",
+		dev->mem, dev->revision, pci->irq,
+		pci->subsystem_vendor, pci->subsystem_device);
+	dev->ext = ext;
+
+	mutex_init(&dev->v4l2_lock);
+	spin_lock_init(&dev->int_slock);
+	spin_lock_init(&dev->slock);
+
+	mutex_init(&dev->i2c_lock);
+
+	dev->module = THIS_MODULE;
+	init_waitqueue_head(&dev->i2c_wq);
+
+	/* set some sane pci arbitrition values */
+	saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
+
+	/* TODO: use the status code of the callback */
+
+	err = -ENODEV;
+
+	if (ext->probe && ext->probe(dev)) {
+		DEB_D("ext->probe() failed for %p. skipping device.\n", dev);
+		goto err_free_i2c;
+	}
+
+	if (ext->attach(dev, pci_ext)) {
+		DEB_D("ext->attach() failed for %p. skipping device.\n", dev);
+		goto err_free_i2c;
+	}
+	/* V4L extensions will set the pci drvdata to the v4l2_device in the
+	   attach() above. So for those cards that do not use V4L we have to
+	   set it explicitly. */
+	pci_set_drvdata(pci, &dev->v4l2_dev);
+
+	saa7146_num++;
+
+	err = 0;
+out:
+	return err;
+
+err_free_i2c:
+	dma_free_coherent(&pci->dev, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr,
+			  dev->d_i2c.dma_handle);
+err_free_rps1:
+	dma_free_coherent(&pci->dev, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr,
+			  dev->d_rps1.dma_handle);
+err_free_rps0:
+	dma_free_coherent(&pci->dev, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr,
+			  dev->d_rps0.dma_handle);
+err_free_irq:
+	free_irq(pci->irq, (void *)dev);
+err_unmap:
+	iounmap(dev->mem);
+err_release:
+	pci_release_region(pci, 0);
+err_disable:
+	pci_disable_device(pci);
+err_free:
+	kfree(dev);
+	goto out;
+}
+
+static void saa7146_remove_one(struct pci_dev *pdev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
+	struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev);
+	struct {
+		void *addr;
+		dma_addr_t dma;
+	} dev_map[] = {
+		{ dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle },
+		{ dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle },
+		{ dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle },
+		{ NULL, 0 }
+	}, *p;
+
+	DEB_EE("dev:%p\n", dev);
+
+	dev->ext->detach(dev);
+
+	/* shut down all video dma transfers */
+	saa7146_write(dev, MC1, 0x00ff0000);
+
+	/* disable all irqs, release irq-routine */
+	saa7146_write(dev, IER, 0);
+
+	free_irq(pdev->irq, dev);
+
+	for (p = dev_map; p->addr; p++)
+		dma_free_coherent(&pdev->dev, SAA7146_RPS_MEM, p->addr,
+				  p->dma);
+
+	iounmap(dev->mem);
+	pci_release_region(pdev, 0);
+	pci_disable_device(pdev);
+	kfree(dev);
+
+	saa7146_num--;
+}
+
+/*********************************************************************************/
+/* extension handling functions                                                  */
+
+int saa7146_register_extension(struct saa7146_extension* ext)
+{
+	DEB_EE("ext:%p\n", ext);
+
+	ext->driver.name = ext->name;
+	ext->driver.id_table = ext->pci_tbl;
+	ext->driver.probe = saa7146_init_one;
+	ext->driver.remove = saa7146_remove_one;
+
+	pr_info("register extension '%s'\n", ext->name);
+	return pci_register_driver(&ext->driver);
+}
+
+int saa7146_unregister_extension(struct saa7146_extension* ext)
+{
+	DEB_EE("ext:%p\n", ext);
+	pr_info("unregister extension '%s'\n", ext->name);
+	pci_unregister_driver(&ext->driver);
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(saa7146_register_extension);
+EXPORT_SYMBOL_GPL(saa7146_unregister_extension);
+
+/* misc functions used by extension modules */
+EXPORT_SYMBOL_GPL(saa7146_pgtable_alloc);
+EXPORT_SYMBOL_GPL(saa7146_pgtable_free);
+EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single);
+EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable);
+EXPORT_SYMBOL_GPL(saa7146_vfree_destroy_pgtable);
+EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done);
+
+EXPORT_SYMBOL_GPL(saa7146_setgpio);
+
+EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare);
+
+EXPORT_SYMBOL_GPL(saa7146_debug);
+
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_DESCRIPTION("driver for generic saa7146-based hardware");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c
new file mode 100644
index 000000000000..aa14698a9c54
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/saa7146_fops.c
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include "saa7146_vv.h"
+
+/****************************************************************************/
+/* resource management functions, shamelessly stolen from saa7134 driver */
+
+int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	if (fh->resources & bit) {
+		DEB_D("already allocated! want: 0x%02x, cur:0x%02x\n",
+		      bit, vv->resources);
+		/* have it already allocated */
+		return 1;
+	}
+
+	/* is it free? */
+	if (vv->resources & bit) {
+		DEB_D("locked! vv->resources:0x%02x, we want:0x%02x\n",
+		      vv->resources, bit);
+		/* no, someone else uses it */
+		return 0;
+	}
+	/* it's free, grab it */
+	fh->resources |= bit;
+	vv->resources |= bit;
+	DEB_D("res: get 0x%02x, cur:0x%02x\n", bit, vv->resources);
+	return 1;
+}
+
+void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	BUG_ON((fh->resources & bits) != bits);
+
+	fh->resources &= ~bits;
+	vv->resources &= ~bits;
+	DEB_D("res: put 0x%02x, cur:0x%02x\n", bits, vv->resources);
+}
+
+
+/********************************************************************************/
+/* common dma functions */
+
+void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q,
+						struct saa7146_buf *buf)
+{
+	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+	DEB_EE("dev:%p, buf:%p\n", dev, buf);
+
+	videobuf_waiton(q, &buf->vb, 0, 0);
+	videobuf_dma_unmap(q->dev, dma);
+	videobuf_dma_free(dma);
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+
+/********************************************************************************/
+/* common buffer functions */
+
+int saa7146_buffer_queue(struct saa7146_dev *dev,
+			 struct saa7146_dmaqueue *q,
+			 struct saa7146_buf *buf)
+{
+	assert_spin_locked(&dev->slock);
+	DEB_EE("dev:%p, dmaq:%p, buf:%p\n", dev, q, buf);
+
+	BUG_ON(!q);
+
+	if (NULL == q->curr) {
+		q->curr = buf;
+		DEB_D("immediately activating buffer %p\n", buf);
+		buf->activate(dev,buf,NULL);
+	} else {
+		list_add_tail(&buf->vb.queue,&q->queue);
+		buf->vb.state = VIDEOBUF_QUEUED;
+		DEB_D("adding buffer %p to queue. (active buffer present)\n",
+		      buf);
+	}
+	return 0;
+}
+
+void saa7146_buffer_finish(struct saa7146_dev *dev,
+			   struct saa7146_dmaqueue *q,
+			   int state)
+{
+	assert_spin_locked(&dev->slock);
+	DEB_EE("dev:%p, dmaq:%p, state:%d\n", dev, q, state);
+	DEB_EE("q->curr:%p\n", q->curr);
+
+	/* finish current buffer */
+	if (NULL == q->curr) {
+		DEB_D("aiii. no current buffer\n");
+		return;
+	}
+
+	q->curr->vb.state = state;
+	q->curr->vb.ts = ktime_get_ns();
+	wake_up(&q->curr->vb.done);
+
+	q->curr = NULL;
+}
+
+void saa7146_buffer_next(struct saa7146_dev *dev,
+			 struct saa7146_dmaqueue *q, int vbi)
+{
+	struct saa7146_buf *buf,*next = NULL;
+
+	BUG_ON(!q);
+
+	DEB_INT("dev:%p, dmaq:%p, vbi:%d\n", dev, q, vbi);
+
+	assert_spin_locked(&dev->slock);
+	if (!list_empty(&q->queue)) {
+		/* activate next one from queue */
+		buf = list_entry(q->queue.next,struct saa7146_buf,vb.queue);
+		list_del(&buf->vb.queue);
+		if (!list_empty(&q->queue))
+			next = list_entry(q->queue.next,struct saa7146_buf, vb.queue);
+		q->curr = buf;
+		DEB_INT("next buffer: buf:%p, prev:%p, next:%p\n",
+			buf, q->queue.prev, q->queue.next);
+		buf->activate(dev,buf,next);
+	} else {
+		DEB_INT("no next buffer. stopping.\n");
+		if( 0 != vbi ) {
+			/* turn off video-dma3 */
+			saa7146_write(dev,MC1, MASK_20);
+		} else {
+			/* nothing to do -- just prevent next video-dma1 transfer
+			   by lowering the protection address */
+
+			// fixme: fix this for vflip != 0
+
+			saa7146_write(dev, PROT_ADDR1, 0);
+			saa7146_write(dev, MC2, (MASK_02|MASK_18));
+
+			/* write the address of the rps-program */
+			saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
+			/* turn on rps */
+			saa7146_write(dev, MC1, (MASK_12 | MASK_28));
+
+/*
+			printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
+			printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
+			printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
+			printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
+			printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
+			printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
+*/
+		}
+		del_timer(&q->timeout);
+	}
+}
+
+void saa7146_buffer_timeout(struct timer_list *t)
+{
+	struct saa7146_dmaqueue *q = from_timer(q, t, timeout);
+	struct saa7146_dev *dev = q->dev;
+	unsigned long flags;
+
+	DEB_EE("dev:%p, dmaq:%p\n", dev, q);
+
+	spin_lock_irqsave(&dev->slock,flags);
+	if (q->curr) {
+		DEB_D("timeout on %p\n", q->curr);
+		saa7146_buffer_finish(dev,q,VIDEOBUF_ERROR);
+	}
+
+	/* we don't restart the transfer here like other drivers do. when
+	   a streaming capture is disabled, the timeout function will be
+	   called for the current buffer. if we activate the next buffer now,
+	   we mess up our capture logic. if a timeout occurs on another buffer,
+	   then something is seriously broken before, so no need to buffer the
+	   next capture IMHO... */
+/*
+	saa7146_buffer_next(dev,q);
+*/
+	spin_unlock_irqrestore(&dev->slock,flags);
+}
+
+/********************************************************************************/
+/* file operations */
+
+static int fops_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct saa7146_fh *fh = NULL;
+	int result = 0;
+
+	DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
+
+	if (mutex_lock_interruptible(vdev->lock))
+		return -ERESTARTSYS;
+
+	DEB_D("using: %p\n", dev);
+
+	/* check if an extension is registered */
+	if( NULL == dev->ext ) {
+		DEB_S("no extension registered for this device\n");
+		result = -ENODEV;
+		goto out;
+	}
+
+	/* allocate per open data */
+	fh = kzalloc(sizeof(*fh),GFP_KERNEL);
+	if (NULL == fh) {
+		DEB_S("cannot allocate memory for per open data\n");
+		result = -ENOMEM;
+		goto out;
+	}
+
+	v4l2_fh_init(&fh->fh, vdev);
+
+	file->private_data = &fh->fh;
+	fh->dev = dev;
+
+	if (vdev->vfl_type == VFL_TYPE_VBI) {
+		DEB_S("initializing vbi...\n");
+		if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
+			result = saa7146_vbi_uops.open(dev,file);
+		if (dev->ext_vv_data->vbi_fops.open)
+			dev->ext_vv_data->vbi_fops.open(file);
+	} else {
+		DEB_S("initializing video...\n");
+		result = saa7146_video_uops.open(dev,file);
+	}
+
+	if (0 != result) {
+		goto out;
+	}
+
+	if( 0 == try_module_get(dev->ext->module)) {
+		result = -EINVAL;
+		goto out;
+	}
+
+	result = 0;
+	v4l2_fh_add(&fh->fh);
+out:
+	if (fh && result != 0) {
+		kfree(fh);
+		file->private_data = NULL;
+	}
+	mutex_unlock(vdev->lock);
+	return result;
+}
+
+static int fops_release(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh  *fh  = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+
+	DEB_EE("file:%p\n", file);
+
+	mutex_lock(vdev->lock);
+
+	if (vdev->vfl_type == VFL_TYPE_VBI) {
+		if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
+			saa7146_vbi_uops.release(dev,file);
+		if (dev->ext_vv_data->vbi_fops.release)
+			dev->ext_vv_data->vbi_fops.release(file);
+	} else {
+		saa7146_video_uops.release(dev,file);
+	}
+
+	v4l2_fh_del(&fh->fh);
+	v4l2_fh_exit(&fh->fh);
+	module_put(dev->ext->module);
+	file->private_data = NULL;
+	kfree(fh);
+
+	mutex_unlock(vdev->lock);
+
+	return 0;
+}
+
+static int fops_mmap(struct file *file, struct vm_area_struct * vma)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh *fh = file->private_data;
+	struct videobuf_queue *q;
+	int res;
+
+	switch (vdev->vfl_type) {
+	case VFL_TYPE_VIDEO: {
+		DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, vma:%p\n",
+		       file, vma);
+		q = &fh->video_q;
+		break;
+		}
+	case VFL_TYPE_VBI: {
+		DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, vma:%p\n",
+		       file, vma);
+		if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT)
+			return -ENODEV;
+		q = &fh->vbi_q;
+		break;
+		}
+	default:
+		BUG();
+	}
+
+	if (mutex_lock_interruptible(vdev->lock))
+		return -ERESTARTSYS;
+	res = videobuf_mmap_mapper(q, vma);
+	mutex_unlock(vdev->lock);
+	return res;
+}
+
+static __poll_t __fops_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh *fh = file->private_data;
+	struct videobuf_buffer *buf = NULL;
+	struct videobuf_queue *q;
+	__poll_t res = v4l2_ctrl_poll(file, wait);
+
+	DEB_EE("file:%p, poll:%p\n", file, wait);
+
+	if (vdev->vfl_type == VFL_TYPE_VBI) {
+		if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT)
+			return res | EPOLLOUT | EPOLLWRNORM;
+		if( 0 == fh->vbi_q.streaming )
+			return res | videobuf_poll_stream(file, &fh->vbi_q, wait);
+		q = &fh->vbi_q;
+	} else {
+		DEB_D("using video queue\n");
+		q = &fh->video_q;
+	}
+
+	if (!list_empty(&q->stream))
+		buf = list_entry(q->stream.next, struct videobuf_buffer, stream);
+
+	if (!buf) {
+		DEB_D("buf == NULL!\n");
+		return res | EPOLLERR;
+	}
+
+	poll_wait(file, &buf->done, wait);
+	if (buf->state == VIDEOBUF_DONE || buf->state == VIDEOBUF_ERROR) {
+		DEB_D("poll succeeded!\n");
+		return res | EPOLLIN | EPOLLRDNORM;
+	}
+
+	DEB_D("nothing to poll for, buf->state:%d\n", buf->state);
+	return res;
+}
+
+static __poll_t fops_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct video_device *vdev = video_devdata(file);
+	__poll_t res;
+
+	mutex_lock(vdev->lock);
+	res = __fops_poll(file, wait);
+	mutex_unlock(vdev->lock);
+	return res;
+}
+
+static ssize_t fops_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh *fh = file->private_data;
+	int ret;
+
+	switch (vdev->vfl_type) {
+	case VFL_TYPE_VIDEO:
+/*
+		DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun",
+		       file, data, (unsigned long)count);
+*/
+		return saa7146_video_uops.read(file,data,count,ppos);
+	case VFL_TYPE_VBI:
+/*
+		DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n",
+		       file, data, (unsigned long)count);
+*/
+		if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) {
+			if (mutex_lock_interruptible(vdev->lock))
+				return -ERESTARTSYS;
+			ret = saa7146_vbi_uops.read(file, data, count, ppos);
+			mutex_unlock(vdev->lock);
+			return ret;
+		}
+		return -EINVAL;
+	default:
+		BUG();
+	}
+}
+
+static ssize_t fops_write(struct file *file, const char __user *data, size_t count, loff_t *ppos)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh *fh = file->private_data;
+	int ret;
+
+	switch (vdev->vfl_type) {
+	case VFL_TYPE_VIDEO:
+		return -EINVAL;
+	case VFL_TYPE_VBI:
+		if (fh->dev->ext_vv_data->vbi_fops.write) {
+			if (mutex_lock_interruptible(vdev->lock))
+				return -ERESTARTSYS;
+			ret = fh->dev->ext_vv_data->vbi_fops.write(file, data, count, ppos);
+			mutex_unlock(vdev->lock);
+			return ret;
+		}
+		return -EINVAL;
+	default:
+		BUG();
+	}
+}
+
+static const struct v4l2_file_operations video_fops =
+{
+	.owner		= THIS_MODULE,
+	.open		= fops_open,
+	.release	= fops_release,
+	.read		= fops_read,
+	.write		= fops_write,
+	.poll		= fops_poll,
+	.mmap		= fops_mmap,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static void vv_callback(struct saa7146_dev *dev, unsigned long status)
+{
+	u32 isr = status;
+
+	DEB_INT("dev:%p, isr:0x%08x\n", dev, (u32)status);
+
+	if (0 != (isr & (MASK_27))) {
+		DEB_INT("irq: RPS0 (0x%08x)\n", isr);
+		saa7146_video_uops.irq_done(dev,isr);
+	}
+
+	if (0 != (isr & (MASK_28))) {
+		u32 mc2 = saa7146_read(dev, MC2);
+		if( 0 != (mc2 & MASK_15)) {
+			DEB_INT("irq: RPS1 vbi workaround (0x%08x)\n", isr);
+			wake_up(&dev->vv_data->vbi_wq);
+			saa7146_write(dev,MC2, MASK_31);
+			return;
+		}
+		DEB_INT("irq: RPS1 (0x%08x)\n", isr);
+		saa7146_vbi_uops.irq_done(dev,isr);
+	}
+}
+
+static const struct v4l2_ctrl_ops saa7146_ctrl_ops = {
+	.s_ctrl = saa7146_s_ctrl,
+};
+
+int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
+{
+	struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
+	struct v4l2_pix_format *fmt;
+	struct v4l2_vbi_format *vbi;
+	struct saa7146_vv *vv;
+	int err;
+
+	err = v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev);
+	if (err)
+		return err;
+
+	v4l2_ctrl_handler_init(hdl, 6);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_CONTRAST, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_SATURATION, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_HFLIP, 0, 1, 1, 0);
+	if (hdl->error) {
+		err = hdl->error;
+		v4l2_ctrl_handler_free(hdl);
+		v4l2_device_unregister(&dev->v4l2_dev);
+		return err;
+	}
+	dev->v4l2_dev.ctrl_handler = hdl;
+
+	vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL);
+	if (vv == NULL) {
+		ERR("out of memory. aborting.\n");
+		v4l2_ctrl_handler_free(hdl);
+		v4l2_device_unregister(&dev->v4l2_dev);
+		return -ENOMEM;
+	}
+	ext_vv->vid_ops = saa7146_video_ioctl_ops;
+	ext_vv->vbi_ops = saa7146_vbi_ioctl_ops;
+	ext_vv->core_ops = &saa7146_video_ioctl_ops;
+
+	DEB_EE("dev:%p\n", dev);
+
+	/* set default values for video parts of the saa7146 */
+	saa7146_write(dev, BCS_CTRL, 0x80400040);
+
+	/* enable video-port pins */
+	saa7146_write(dev, MC1, (MASK_10 | MASK_26));
+
+	/* save per-device extension data (one extension can
+	   handle different devices that might need different
+	   configuration data) */
+	dev->ext_vv_data = ext_vv;
+
+	vv->d_clipping.cpu_addr =
+		dma_alloc_coherent(&dev->pci->dev, SAA7146_CLIPPING_MEM,
+				   &vv->d_clipping.dma_handle, GFP_KERNEL);
+	if( NULL == vv->d_clipping.cpu_addr ) {
+		ERR("out of memory. aborting.\n");
+		kfree(vv);
+		v4l2_ctrl_handler_free(hdl);
+		v4l2_device_unregister(&dev->v4l2_dev);
+		return -ENOMEM;
+	}
+
+	saa7146_video_uops.init(dev,vv);
+	if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
+		saa7146_vbi_uops.init(dev,vv);
+
+	vv->ov_fb.fmt.width = vv->standard->h_max_out;
+	vv->ov_fb.fmt.height = vv->standard->v_max_out;
+	vv->ov_fb.fmt.pixelformat = V4L2_PIX_FMT_RGB565;
+	vv->ov_fb.fmt.bytesperline = 2 * vv->ov_fb.fmt.width;
+	vv->ov_fb.fmt.sizeimage = vv->ov_fb.fmt.bytesperline * vv->ov_fb.fmt.height;
+	vv->ov_fb.fmt.colorspace = V4L2_COLORSPACE_SRGB;
+
+	fmt = &vv->video_fmt;
+	fmt->width = 384;
+	fmt->height = 288;
+	fmt->pixelformat = V4L2_PIX_FMT_BGR24;
+	fmt->field = V4L2_FIELD_ANY;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	fmt->bytesperline = 3 * fmt->width;
+	fmt->sizeimage = fmt->bytesperline * fmt->height;
+
+	vbi = &vv->vbi_fmt;
+	vbi->sampling_rate	= 27000000;
+	vbi->offset		= 248; /* todo */
+	vbi->samples_per_line	= 720 * 2;
+	vbi->sample_format	= V4L2_PIX_FMT_GREY;
+
+	/* fixme: this only works for PAL */
+	vbi->start[0] = 5;
+	vbi->count[0] = 16;
+	vbi->start[1] = 312;
+	vbi->count[1] = 16;
+
+	timer_setup(&vv->vbi_read_timeout, NULL, 0);
+
+	vv->ov_fb.capability = V4L2_FBUF_CAP_LIST_CLIPPING;
+	vv->ov_fb.flags = V4L2_FBUF_FLAG_PRIMARY;
+	dev->vv_data = vv;
+	dev->vv_callback = &vv_callback;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_vv_init);
+
+int saa7146_vv_release(struct saa7146_dev* dev)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	DEB_EE("dev:%p\n", dev);
+
+	v4l2_device_unregister(&dev->v4l2_dev);
+	dma_free_coherent(&dev->pci->dev, SAA7146_CLIPPING_MEM,
+			  vv->d_clipping.cpu_addr, vv->d_clipping.dma_handle);
+	v4l2_ctrl_handler_free(&dev->ctrl_handler);
+	kfree(vv);
+	dev->vv_data = NULL;
+	dev->vv_callback = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_vv_release);
+
+int saa7146_register_device(struct video_device *vfd, struct saa7146_dev *dev,
+			    char *name, int type)
+{
+	int err;
+	int i;
+
+	DEB_EE("dev:%p, name:'%s', type:%d\n", dev, name, type);
+
+	vfd->fops = &video_fops;
+	if (type == VFL_TYPE_VIDEO)
+		vfd->ioctl_ops = &dev->ext_vv_data->vid_ops;
+	else
+		vfd->ioctl_ops = &dev->ext_vv_data->vbi_ops;
+	vfd->release = video_device_release_empty;
+	vfd->lock = &dev->v4l2_lock;
+	vfd->v4l2_dev = &dev->v4l2_dev;
+	vfd->tvnorms = 0;
+	for (i = 0; i < dev->ext_vv_data->num_stds; i++)
+		vfd->tvnorms |= dev->ext_vv_data->stds[i].id;
+	strscpy(vfd->name, name, sizeof(vfd->name));
+	vfd->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY |
+			   V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+	vfd->device_caps |= dev->ext_vv_data->capabilities;
+	if (type == VFL_TYPE_VIDEO)
+		vfd->device_caps &=
+			~(V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_OUTPUT);
+	else
+		vfd->device_caps &=
+			~(V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_AUDIO);
+	video_set_drvdata(vfd, dev);
+
+	err = video_register_device(vfd, type, -1);
+	if (err < 0) {
+		ERR("cannot register v4l2 device. skipping.\n");
+		return err;
+	}
+
+	pr_info("%s: registered device %s [v4l2]\n",
+		dev->name, video_device_node_name(vfd));
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_register_device);
+
+int saa7146_unregister_device(struct video_device *vfd, struct saa7146_dev *dev)
+{
+	DEB_EE("dev:%p\n", dev);
+
+	video_unregister_device(vfd);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_unregister_device);
+
+static int __init saa7146_vv_init_module(void)
+{
+	return 0;
+}
+
+
+static void __exit saa7146_vv_cleanup_module(void)
+{
+}
+
+module_init(saa7146_vv_init_module);
+module_exit(saa7146_vv_cleanup_module);
+
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_DESCRIPTION("video4linux driver for saa7146-based hardware");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c
new file mode 100644
index 000000000000..b1222a4cfa4a
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/saa7146_hlp.c
@@ -0,0 +1,1046 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include "saa7146_vv.h"
+
+static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
+{
+	/* clear out the necessary bits */
+	*clip_format &= 0x0000ffff;
+	/* set these bits new */
+	*clip_format |=  (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
+}
+
+static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
+{
+	*hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
+	*hps_ctrl |= (source << 30) | (sync << 28);
+}
+
+static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
+{
+	int hyo = 0, hxo = 0;
+
+	hyo = vv->standard->v_offset;
+	hxo = vv->standard->h_offset;
+
+	*hps_h_scale	&= ~(MASK_B0 | 0xf00);
+	*hps_h_scale	|= (hxo <<  0);
+
+	*hps_ctrl	&= ~(MASK_W0 | MASK_B2);
+	*hps_ctrl	|= (hyo << 12);
+}
+
+/* helper functions for the calculation of the horizontal- and vertical
+   scaling registers, clip-format-register etc ...
+   these functions take pointers to the (most-likely read-out
+   original-values) and manipulate them according to the requested
+   changes.
+*/
+
+/* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
+static struct {
+	u16 hps_coeff;
+	u16 weight_sum;
+} hps_h_coeff_tab [] = {
+	{0x00,   2}, {0x02,   4}, {0x00,   4}, {0x06,   8}, {0x02,   8},
+	{0x08,   8}, {0x00,   8}, {0x1E,  16}, {0x0E,   8}, {0x26,   8},
+	{0x06,   8}, {0x42,   8}, {0x02,   8}, {0x80,   8}, {0x00,   8},
+	{0xFE,  16}, {0xFE,   8}, {0x7E,   8}, {0x7E,   8}, {0x3E,   8},
+	{0x3E,   8}, {0x1E,   8}, {0x1E,   8}, {0x0E,   8}, {0x0E,   8},
+	{0x06,   8}, {0x06,   8}, {0x02,   8}, {0x02,   8}, {0x00,   8},
+	{0x00,   8}, {0xFE,  16}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
+	{0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
+	{0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
+	{0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0x7E,   8},
+	{0x7E,   8}, {0x3E,   8}, {0x3E,   8}, {0x1E,   8}, {0x1E,   8},
+	{0x0E,   8}, {0x0E,   8}, {0x06,   8}, {0x06,   8}, {0x02,   8},
+	{0x02,   8}, {0x00,   8}, {0x00,   8}, {0xFE,  16}
+};
+
+/* table of attenuation values for horizontal scaling */
+static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
+
+/* calculate horizontal scale registers */
+static int calculate_h_scale_registers(struct saa7146_dev *dev,
+	int in_x, int out_x, int flip_lr,
+	u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
+{
+	/* horizontal prescaler */
+	u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
+	/* horizontal scaler */
+	u32 xim = 0, xp = 0, xsci =0;
+	/* vertical scale & gain */
+	u32 pfuv = 0;
+
+	/* helper variables */
+	u32 h_atten = 0, i = 0;
+
+	if ( 0 == out_x ) {
+		return -EINVAL;
+	}
+
+	/* mask out vanity-bit */
+	*hps_ctrl &= ~MASK_29;
+
+	/* calculate prescale-(xspc)-value:	[n   .. 1/2) : 1
+						[1/2 .. 1/3) : 2
+						[1/3 .. 1/4) : 3
+						...		*/
+	if (in_x > out_x) {
+		xpsc = in_x / out_x;
+	}
+	else {
+		/* zooming */
+		xpsc = 1;
+	}
+
+	/* if flip_lr-bit is set, number of pixels after
+	   horizontal prescaling must be < 384 */
+	if ( 0 != flip_lr ) {
+
+		/* set vanity bit */
+		*hps_ctrl |= MASK_29;
+
+		while (in_x / xpsc >= 384 )
+			xpsc++;
+	}
+	/* if zooming is wanted, number of pixels after
+	   horizontal prescaling must be < 768 */
+	else {
+		while ( in_x / xpsc >= 768 )
+			xpsc++;
+	}
+
+	/* maximum prescale is 64 (p.69) */
+	if ( xpsc > 64 )
+		xpsc = 64;
+
+	/* keep xacm clear*/
+	xacm = 0;
+
+	/* set horizontal filter parameters (CXY = CXUV) */
+	cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
+	cxuv = cxy;
+
+	/* calculate and set horizontal fine scale (xsci) */
+
+	/* bypass the horizontal scaler ? */
+	if ( (in_x == out_x) && ( 1 == xpsc ) )
+		xsci = 0x400;
+	else
+		xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;
+
+	/* set start phase for horizontal fine scale (xp) to 0 */
+	xp = 0;
+
+	/* set xim, if we bypass the horizontal scaler */
+	if ( 0x400 == xsci )
+		xim = 1;
+	else
+		xim = 0;
+
+	/* if the prescaler is bypassed, enable horizontal
+	   accumulation mode (xacm) and clear dcgx */
+	if( 1 == xpsc ) {
+		xacm = 1;
+		dcgx = 0;
+	} else {
+		xacm = 0;
+		/* get best match in the table of attenuations
+		   for horizontal scaling */
+		h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;
+
+		for (i = 0; h_attenuation[i] != 0; i++) {
+			if (h_attenuation[i] >= h_atten)
+				break;
+		}
+
+		dcgx = i;
+	}
+
+	/* the horizontal scaling increment controls the UV filter
+	   to reduce the bandwidth to improve the display quality,
+	   so set it ... */
+	if ( xsci == 0x400)
+		pfuv = 0x00;
+	else if ( xsci < 0x600)
+		pfuv = 0x01;
+	else if ( xsci < 0x680)
+		pfuv = 0x11;
+	else if ( xsci < 0x700)
+		pfuv = 0x22;
+	else
+		pfuv = 0x33;
+
+
+	*hps_v_gain  &= MASK_W0|MASK_B2;
+	*hps_v_gain  |= (pfuv << 24);
+
+	*hps_h_scale	&= ~(MASK_W1 | 0xf000);
+	*hps_h_scale	|= (xim << 31) | (xp << 24) | (xsci << 12);
+
+	*hps_h_prescale	|= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);
+
+	return 0;
+}
+
+static struct {
+	u16 hps_coeff;
+	u16 weight_sum;
+} hps_v_coeff_tab [] = {
+ {0x0100,   2},  {0x0102,   4},  {0x0300,   4},  {0x0106,   8},  {0x0502,   8},
+ {0x0708,   8},  {0x0F00,   8},  {0x011E,  16},  {0x110E,  16},  {0x1926,  16},
+ {0x3906,  16},  {0x3D42,  16},  {0x7D02,  16},  {0x7F80,  16},  {0xFF00,  16},
+ {0x01FE,  32},  {0x01FE,  32},  {0x817E,  32},  {0x817E,  32},  {0xC13E,  32},
+ {0xC13E,  32},  {0xE11E,  32},  {0xE11E,  32},  {0xF10E,  32},  {0xF10E,  32},
+ {0xF906,  32},  {0xF906,  32},  {0xFD02,  32},  {0xFD02,  32},  {0xFF00,  32},
+ {0xFF00,  32},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
+ {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
+ {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
+ {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x817E,  64},
+ {0x817E,  64},  {0xC13E,  64},  {0xC13E,  64},  {0xE11E,  64},  {0xE11E,  64},
+ {0xF10E,  64},  {0xF10E,  64},  {0xF906,  64},  {0xF906,  64},  {0xFD02,  64},
+ {0xFD02,  64},  {0xFF00,  64},  {0xFF00,  64},  {0x01FE, 128}
+};
+
+/* table of attenuation values for vertical scaling */
+static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
+
+/* calculate vertical scale registers */
+static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
+	int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
+{
+	int lpi = 0;
+
+	/* vertical scaling */
+	u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
+	/* vertical scale & gain */
+	u32 dcgy = 0, cya_cyb = 0;
+
+	/* helper variables */
+	u32 v_atten = 0, i = 0;
+
+	/* error, if vertical zooming */
+	if ( in_y < out_y ) {
+		return -EINVAL;
+	}
+
+	/* linear phase interpolation may be used
+	   if scaling is between 1 and 1/2 (both fields used)
+	   or scaling is between 1/2 and 1/4 (if only one field is used) */
+
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+		if( 2*out_y >= in_y) {
+			lpi = 1;
+		}
+	} else if (field == V4L2_FIELD_TOP
+		|| field == V4L2_FIELD_ALTERNATE
+		|| field == V4L2_FIELD_BOTTOM) {
+		if( 4*out_y >= in_y ) {
+			lpi = 1;
+		}
+		out_y *= 2;
+	}
+	if( 0 != lpi ) {
+
+		yacm = 0;
+		yacl = 0;
+		cya_cyb = 0x00ff;
+
+		/* calculate scaling increment */
+		if ( in_y > out_y )
+			ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
+		else
+			ysci = 0;
+
+		dcgy = 0;
+
+		/* calculate ype and ypo */
+		ype = ysci / 16;
+		ypo = ype + (ysci / 64);
+
+	} else {
+		yacm = 1;
+
+		/* calculate scaling increment */
+		ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;
+
+		/* calculate ype and ypo */
+		ypo = ype = ((ysci + 15) / 16);
+
+		/* the sequence length interval (yacl) has to be set according
+		   to the prescale value, e.g.	[n   .. 1/2) : 0
+						[1/2 .. 1/3) : 1
+						[1/3 .. 1/4) : 2
+						... */
+		if ( ysci < 512) {
+			yacl = 0;
+		} else {
+			yacl = ( ysci / (1024 - ysci) );
+		}
+
+		/* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
+		cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;
+
+		/* get best match in the table of attenuations for vertical scaling */
+		v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;
+
+		for (i = 0; v_attenuation[i] != 0; i++) {
+			if (v_attenuation[i] >= v_atten)
+				break;
+		}
+
+		dcgy = i;
+	}
+
+	/* ypo and ype swapped in spec ? */
+	*hps_v_scale	|= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);
+
+	*hps_v_gain	&= ~(MASK_W0|MASK_B2);
+	*hps_v_gain	|= (dcgy << 16) | (cya_cyb << 0);
+
+	return 0;
+}
+
+/* simple bubble-sort algorithm with duplicate elimination */
+static int sort_and_eliminate(u32* values, int* count)
+{
+	int low = 0, high = 0, top = 0;
+	int cur = 0, next = 0;
+
+	/* sanity checks */
+	if( (0 > *count) || (NULL == values) ) {
+		return -EINVAL;
+	}
+
+	/* bubble sort the first @count items of the array @values */
+	for( top = *count; top > 0; top--) {
+		for( low = 0, high = 1; high < top; low++, high++) {
+			if( values[low] > values[high] )
+				swap(values[low], values[high]);
+		}
+	}
+
+	/* remove duplicate items */
+	for( cur = 0, next = 1; next < *count; next++) {
+		if( values[cur] != values[next])
+			values[++cur] = values[next];
+	}
+
+	*count = cur + 1;
+
+	return 0;
+}
+
+static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
+	struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	__le32 *clipping = vv->d_clipping.cpu_addr;
+
+	int width = vv->ov.win.w.width;
+	int height =  vv->ov.win.w.height;
+	int clipcount = vv->ov.nclips;
+
+	u32 line_list[32];
+	u32 pixel_list[32];
+	int numdwords = 0;
+
+	int i = 0, j = 0;
+	int cnt_line = 0, cnt_pixel = 0;
+
+	int x[32], y[32], w[32], h[32];
+
+	/* clear out memory */
+	memset(&line_list[0],  0x00, sizeof(u32)*32);
+	memset(&pixel_list[0], 0x00, sizeof(u32)*32);
+	memset(clipping,  0x00, SAA7146_CLIPPING_MEM);
+
+	/* fill the line and pixel-lists */
+	for(i = 0; i < clipcount; i++) {
+		int l = 0, r = 0, t = 0, b = 0;
+
+		x[i] = vv->ov.clips[i].c.left;
+		y[i] = vv->ov.clips[i].c.top;
+		w[i] = vv->ov.clips[i].c.width;
+		h[i] = vv->ov.clips[i].c.height;
+
+		if( w[i] < 0) {
+			x[i] += w[i]; w[i] = -w[i];
+		}
+		if( h[i] < 0) {
+			y[i] += h[i]; h[i] = -h[i];
+		}
+		if( x[i] < 0) {
+			w[i] += x[i]; x[i] = 0;
+		}
+		if( y[i] < 0) {
+			h[i] += y[i]; y[i] = 0;
+		}
+		if( 0 != vv->vflip ) {
+			y[i] = height - y[i] - h[i];
+		}
+
+		l = x[i];
+		r = x[i]+w[i];
+		t = y[i];
+		b = y[i]+h[i];
+
+		/* insert left/right coordinates */
+		pixel_list[ 2*i   ] = min_t(int, l, width);
+		pixel_list[(2*i)+1] = min_t(int, r, width);
+		/* insert top/bottom coordinates */
+		line_list[ 2*i   ] = min_t(int, t, height);
+		line_list[(2*i)+1] = min_t(int, b, height);
+	}
+
+	/* sort and eliminate lists */
+	cnt_line = cnt_pixel = 2*clipcount;
+	sort_and_eliminate( &pixel_list[0], &cnt_pixel );
+	sort_and_eliminate( &line_list[0], &cnt_line );
+
+	/* calculate the number of used u32s */
+	numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
+	numdwords = max_t(int, 4, numdwords);
+	numdwords = min_t(int, 64, numdwords);
+
+	/* fill up cliptable */
+	for(i = 0; i < cnt_pixel; i++) {
+		clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
+	}
+	for(i = 0; i < cnt_line; i++) {
+		clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
+	}
+
+	/* fill up cliptable with the display infos */
+	for(j = 0; j < clipcount; j++) {
+
+		for(i = 0; i < cnt_pixel; i++) {
+
+			if( x[j] < 0)
+				x[j] = 0;
+
+			if( pixel_list[i] < (x[j] + w[j])) {
+
+				if ( pixel_list[i] >= x[j] ) {
+					clipping[2*i] |= cpu_to_le32(1 << j);
+				}
+			}
+		}
+		for(i = 0; i < cnt_line; i++) {
+
+			if( y[j] < 0)
+				y[j] = 0;
+
+			if( line_list[i] < (y[j] + h[j]) ) {
+
+				if( line_list[i] >= y[j] ) {
+					clipping[(2*i)+1] |= cpu_to_le32(1 << j);
+				}
+			}
+		}
+	}
+
+	/* adjust arbitration control register */
+	*arbtr_ctrl &= 0xffff00ff;
+	*arbtr_ctrl |= 0x00001c00;
+
+	vdma2->base_even	= vv->d_clipping.dma_handle;
+	vdma2->base_odd		= vv->d_clipping.dma_handle;
+	vdma2->prot_addr	= vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
+	vdma2->base_page	= 0x04;
+	vdma2->pitch		= 0x00;
+	vdma2->num_line_byte	= (0 << 16 | (sizeof(u32))*(numdwords-1) );
+
+	/* set clipping-mode. this depends on the field(s) used */
+	*clip_format &= 0xfffffff7;
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+		*clip_format |= 0x00000008;
+	} else {
+		*clip_format |= 0x00000000;
+	}
+}
+
+/* disable clipping */
+static void saa7146_disable_clipping(struct saa7146_dev *dev)
+{
+	u32 clip_format	= saa7146_read(dev, CLIP_FORMAT_CTRL);
+
+	/* mask out relevant bits (=lower word)*/
+	clip_format &= MASK_W1;
+
+	/* upload clipping-registers*/
+	saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
+	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
+
+	/* disable video dma2 */
+	saa7146_write(dev, MC1, MASK_21);
+}
+
+static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	enum v4l2_field field = vv->ov.win.field;
+	struct	saa7146_video_dma vdma2;
+	u32 clip_format;
+	u32 arbtr_ctrl;
+
+	/* check clipcount, disable clipping if clipcount == 0*/
+	if (vv->ov.nclips == 0) {
+		saa7146_disable_clipping(dev);
+		return;
+	}
+
+	clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
+	arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
+
+	calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);
+
+	/* set clipping format */
+	clip_format &= 0xffff0008;
+	clip_format |= (SAA7146_CLIPPING_RECT << 4);
+
+	/* prepare video dma2 */
+	saa7146_write(dev, BASE_EVEN2,		vdma2.base_even);
+	saa7146_write(dev, BASE_ODD2,		vdma2.base_odd);
+	saa7146_write(dev, PROT_ADDR2,		vdma2.prot_addr);
+	saa7146_write(dev, BASE_PAGE2,		vdma2.base_page);
+	saa7146_write(dev, PITCH2,		vdma2.pitch);
+	saa7146_write(dev, NUM_LINE_BYTE2,	vdma2.num_line_byte);
+
+	/* prepare the rest */
+	saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
+	saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
+
+	/* upload clip_control-register, clipping-registers, enable video dma2 */
+	saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
+	saa7146_write(dev, MC1, (MASK_05 | MASK_21));
+}
+
+static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	int source = vv->current_hps_source;
+	int sync = vv->current_hps_sync;
+
+	u32 hps_v_scale = 0, hps_v_gain  = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;
+
+	/* set vertical scale */
+	hps_v_scale = 0; /* all bits get set by the function-call */
+	hps_v_gain  = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
+	calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);
+
+	/* set horizontal scale */
+	hps_ctrl	= 0;
+	hps_h_prescale	= 0; /* all bits get set in the function */
+	hps_h_scale	= 0;
+	calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);
+
+	/* set hyo and hxo */
+	calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
+	calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);
+
+	/* write out new register contents */
+	saa7146_write(dev, HPS_V_SCALE,	hps_v_scale);
+	saa7146_write(dev, HPS_V_GAIN,	hps_v_gain);
+	saa7146_write(dev, HPS_CTRL,	hps_ctrl);
+	saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
+	saa7146_write(dev, HPS_H_SCALE,	hps_h_scale);
+
+	/* upload shadow-ram registers */
+	saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
+}
+
+/* calculate the new memory offsets for a desired position */
+static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
+
+	int b_depth = vv->ov_fmt->depth;
+	int b_bpl = vv->ov_fb.fmt.bytesperline;
+	/* The unsigned long cast is to remove a 64-bit compile warning since
+	   it looks like a 64-bit address is cast to a 32-bit value, even
+	   though the base pointer is really a 32-bit physical address that
+	   goes into a 32-bit DMA register.
+	   FIXME: might not work on some 64-bit platforms, but see the FIXME
+	   in struct v4l2_framebuffer (videodev2.h) for that.
+	 */
+	u32 base = (u32)(unsigned long)vv->ov_fb.base;
+
+	struct	saa7146_video_dma vdma1;
+
+	/* calculate memory offsets for picture, look if we shall top-down-flip */
+	vdma1.pitch	= 2*b_bpl;
+	if ( 0 == vv->vflip ) {
+		vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
+		vdma1.base_odd  = vdma1.base_even + (vdma1.pitch / 2);
+		vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
+	}
+	else {
+		vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
+		vdma1.base_odd  = vdma1.base_even - (vdma1.pitch / 2);
+		vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
+	}
+
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+	} else if (field == V4L2_FIELD_ALTERNATE) {
+		/* fixme */
+		vdma1.base_odd = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	} else if (field == V4L2_FIELD_TOP) {
+		vdma1.base_odd = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	} else if (field == V4L2_FIELD_BOTTOM) {
+		vdma1.base_odd = vdma1.base_even;
+		vdma1.base_even = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	}
+
+	if ( 0 != vv->vflip ) {
+		vdma1.pitch *= -1;
+	}
+
+	vdma1.base_page = sfmt->swap;
+	vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;
+
+	saa7146_write_out_dma(dev, 1, &vdma1);
+}
+
+static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
+{
+	u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
+
+	/* call helper function */
+	calculate_output_format_register(dev,palette,&clip_format);
+
+	/* update the hps registers */
+	saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
+	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
+}
+
+/* select input-source */
+void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	u32 hps_ctrl = 0;
+
+	/* read old state */
+	hps_ctrl = saa7146_read(dev, HPS_CTRL);
+
+	hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
+	hps_ctrl |= (source << 30) | (sync << 28);
+
+	/* write back & upload register */
+	saa7146_write(dev, HPS_CTRL, hps_ctrl);
+	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
+
+	vv->current_hps_source = source;
+	vv->current_hps_sync = sync;
+}
+EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);
+
+int saa7146_enable_overlay(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field);
+	saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat);
+	saa7146_set_output_format(dev, vv->ov_fmt->trans);
+	saa7146_set_clipping_rect(fh);
+
+	/* enable video dma1 */
+	saa7146_write(dev, MC1, (MASK_06 | MASK_22));
+	return 0;
+}
+
+void saa7146_disable_overlay(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+
+	/* disable clipping + video dma1 */
+	saa7146_disable_clipping(dev);
+	saa7146_write(dev, MC1, MASK_22);
+}
+
+void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
+{
+	int where = 0;
+
+	if( which < 1 || which > 3) {
+		return;
+	}
+
+	/* calculate starting address */
+	where  = (which-1)*0x18;
+
+	saa7146_write(dev, where,	vdma->base_odd);
+	saa7146_write(dev, where+0x04,	vdma->base_even);
+	saa7146_write(dev, where+0x08,	vdma->prot_addr);
+	saa7146_write(dev, where+0x0c,	vdma->pitch);
+	saa7146_write(dev, where+0x10,	vdma->base_page);
+	saa7146_write(dev, where+0x14,	vdma->num_line_byte);
+
+	/* upload */
+	saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
+/*
+	printk("vdma%d.base_even:     0x%08x\n", which,vdma->base_even);
+	printk("vdma%d.base_odd:      0x%08x\n", which,vdma->base_odd);
+	printk("vdma%d.prot_addr:     0x%08x\n", which,vdma->prot_addr);
+	printk("vdma%d.base_page:     0x%08x\n", which,vdma->base_page);
+	printk("vdma%d.pitch:         0x%08x\n", which,vdma->pitch);
+	printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
+*/
+}
+
+static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_video_dma vdma1;
+
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+	int width = buf->fmt->width;
+	int height = buf->fmt->height;
+	int bytesperline = buf->fmt->bytesperline;
+	enum v4l2_field field = buf->fmt->field;
+
+	int depth = sfmt->depth;
+
+	DEB_CAP("[size=%dx%d,fields=%s]\n",
+		width, height, v4l2_field_names[field]);
+
+	if( bytesperline != 0) {
+		vdma1.pitch = bytesperline*2;
+	} else {
+		vdma1.pitch = (width*depth*2)/8;
+	}
+	vdma1.num_line_byte	= ((vv->standard->v_field<<16) + vv->standard->h_pixels);
+	vdma1.base_page		= buf->pt[0].dma | ME1 | sfmt->swap;
+
+	if( 0 != vv->vflip ) {
+		vdma1.prot_addr	= buf->pt[0].offset;
+		vdma1.base_even	= buf->pt[0].offset+(vdma1.pitch/2)*height;
+		vdma1.base_odd	= vdma1.base_even - (vdma1.pitch/2);
+	} else {
+		vdma1.base_even	= buf->pt[0].offset;
+		vdma1.base_odd	= vdma1.base_even + (vdma1.pitch/2);
+		vdma1.prot_addr	= buf->pt[0].offset+(vdma1.pitch/2)*height;
+	}
+
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+	} else if (field == V4L2_FIELD_ALTERNATE) {
+		/* fixme */
+		if ( vv->last_field == V4L2_FIELD_TOP ) {
+			vdma1.base_odd	= vdma1.prot_addr;
+			vdma1.pitch /= 2;
+		} else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
+			vdma1.base_odd	= vdma1.base_even;
+			vdma1.base_even = vdma1.prot_addr;
+			vdma1.pitch /= 2;
+		}
+	} else if (field == V4L2_FIELD_TOP) {
+		vdma1.base_odd	= vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	} else if (field == V4L2_FIELD_BOTTOM) {
+		vdma1.base_odd	= vdma1.base_even;
+		vdma1.base_even = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	}
+
+	if( 0 != vv->vflip ) {
+		vdma1.pitch *= -1;
+	}
+
+	saa7146_write_out_dma(dev, 1, &vdma1);
+	return 0;
+}
+
+static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
+{
+	int height = buf->fmt->height;
+	int width = buf->fmt->width;
+
+	vdma2->pitch	= width;
+	vdma3->pitch	= width;
+
+	/* fixme: look at bytesperline! */
+
+	if( 0 != vv->vflip ) {
+		vdma2->prot_addr	= buf->pt[1].offset;
+		vdma2->base_even	= ((vdma2->pitch/2)*height)+buf->pt[1].offset;
+		vdma2->base_odd		= vdma2->base_even - (vdma2->pitch/2);
+
+		vdma3->prot_addr	= buf->pt[2].offset;
+		vdma3->base_even	= ((vdma3->pitch/2)*height)+buf->pt[2].offset;
+		vdma3->base_odd		= vdma3->base_even - (vdma3->pitch/2);
+	} else {
+		vdma3->base_even	= buf->pt[2].offset;
+		vdma3->base_odd		= vdma3->base_even + (vdma3->pitch/2);
+		vdma3->prot_addr	= (vdma3->pitch/2)*height+buf->pt[2].offset;
+
+		vdma2->base_even	= buf->pt[1].offset;
+		vdma2->base_odd		= vdma2->base_even + (vdma2->pitch/2);
+		vdma2->prot_addr	= (vdma2->pitch/2)*height+buf->pt[1].offset;
+	}
+
+	return 0;
+}
+
+static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
+{
+	int height = buf->fmt->height;
+	int width = buf->fmt->width;
+
+	vdma2->pitch	= width/2;
+	vdma3->pitch	= width/2;
+
+	if( 0 != vv->vflip ) {
+		vdma2->prot_addr	= buf->pt[2].offset;
+		vdma2->base_even	= ((vdma2->pitch/2)*height)+buf->pt[2].offset;
+		vdma2->base_odd		= vdma2->base_even - (vdma2->pitch/2);
+
+		vdma3->prot_addr	= buf->pt[1].offset;
+		vdma3->base_even	= ((vdma3->pitch/2)*height)+buf->pt[1].offset;
+		vdma3->base_odd		= vdma3->base_even - (vdma3->pitch/2);
+
+	} else {
+		vdma3->base_even	= buf->pt[2].offset;
+		vdma3->base_odd		= vdma3->base_even + (vdma3->pitch);
+		vdma3->prot_addr	= (vdma3->pitch/2)*height+buf->pt[2].offset;
+
+		vdma2->base_even	= buf->pt[1].offset;
+		vdma2->base_odd		= vdma2->base_even + (vdma2->pitch);
+		vdma2->prot_addr	= (vdma2->pitch/2)*height+buf->pt[1].offset;
+	}
+	return 0;
+}
+
+static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_video_dma vdma1;
+	struct saa7146_video_dma vdma2;
+	struct saa7146_video_dma vdma3;
+
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+	int width = buf->fmt->width;
+	int height = buf->fmt->height;
+	enum v4l2_field field = buf->fmt->field;
+
+	BUG_ON(0 == buf->pt[0].dma);
+	BUG_ON(0 == buf->pt[1].dma);
+	BUG_ON(0 == buf->pt[2].dma);
+
+	DEB_CAP("[size=%dx%d,fields=%s]\n",
+		width, height, v4l2_field_names[field]);
+
+	/* fixme: look at bytesperline! */
+
+	/* fixme: what happens for user space buffers here?. The offsets are
+	   most likely wrong, this version here only works for page-aligned
+	   buffers, modifications to the pagetable-functions are necessary...*/
+
+	vdma1.pitch		= width*2;
+	vdma1.num_line_byte	= ((vv->standard->v_field<<16) + vv->standard->h_pixels);
+	vdma1.base_page		= buf->pt[0].dma | ME1;
+
+	if( 0 != vv->vflip ) {
+		vdma1.prot_addr	= buf->pt[0].offset;
+		vdma1.base_even	= ((vdma1.pitch/2)*height)+buf->pt[0].offset;
+		vdma1.base_odd	= vdma1.base_even - (vdma1.pitch/2);
+	} else {
+		vdma1.base_even	= buf->pt[0].offset;
+		vdma1.base_odd	= vdma1.base_even + (vdma1.pitch/2);
+		vdma1.prot_addr	= (vdma1.pitch/2)*height+buf->pt[0].offset;
+	}
+
+	vdma2.num_line_byte	= 0; /* unused */
+	vdma2.base_page		= buf->pt[1].dma | ME1;
+
+	vdma3.num_line_byte	= 0; /* unused */
+	vdma3.base_page		= buf->pt[2].dma | ME1;
+
+	switch( sfmt->depth ) {
+		case 12: {
+			calc_planar_420(vv,buf,&vdma2,&vdma3);
+			break;
+		}
+		case 16: {
+			calc_planar_422(vv,buf,&vdma2,&vdma3);
+			break;
+		}
+		default: {
+			return -1;
+		}
+	}
+
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+	} else if (field == V4L2_FIELD_ALTERNATE) {
+		/* fixme */
+		vdma1.base_odd	= vdma1.prot_addr;
+		vdma1.pitch /= 2;
+		vdma2.base_odd	= vdma2.prot_addr;
+		vdma2.pitch /= 2;
+		vdma3.base_odd	= vdma3.prot_addr;
+		vdma3.pitch /= 2;
+	} else if (field == V4L2_FIELD_TOP) {
+		vdma1.base_odd	= vdma1.prot_addr;
+		vdma1.pitch /= 2;
+		vdma2.base_odd	= vdma2.prot_addr;
+		vdma2.pitch /= 2;
+		vdma3.base_odd	= vdma3.prot_addr;
+		vdma3.pitch /= 2;
+	} else if (field == V4L2_FIELD_BOTTOM) {
+		vdma1.base_odd	= vdma1.base_even;
+		vdma1.base_even = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+		vdma2.base_odd	= vdma2.base_even;
+		vdma2.base_even = vdma2.prot_addr;
+		vdma2.pitch /= 2;
+		vdma3.base_odd	= vdma3.base_even;
+		vdma3.base_even = vdma3.prot_addr;
+		vdma3.pitch /= 2;
+	}
+
+	if( 0 != vv->vflip ) {
+		vdma1.pitch *= -1;
+		vdma2.pitch *= -1;
+		vdma3.pitch *= -1;
+	}
+
+	saa7146_write_out_dma(dev, 1, &vdma1);
+	if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
+		saa7146_write_out_dma(dev, 3, &vdma2);
+		saa7146_write_out_dma(dev, 2, &vdma3);
+	} else {
+		saa7146_write_out_dma(dev, 2, &vdma2);
+		saa7146_write_out_dma(dev, 3, &vdma3);
+	}
+	return 0;
+}
+
+static void program_capture_engine(struct saa7146_dev *dev, int planar)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	int count = 0;
+
+	unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
+	unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
+
+	/* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
+	WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
+	WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);
+
+	/* set rps register 0 */
+	WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
+	WRITE_RPS0(MASK_27 | MASK_11);
+
+	/* turn on video-dma1 */
+	WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+	WRITE_RPS0(MASK_06 | MASK_22);			/* => mask */
+	WRITE_RPS0(MASK_06 | MASK_22);			/* => values */
+	if( 0 != planar ) {
+		/* turn on video-dma2 */
+		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+		WRITE_RPS0(MASK_05 | MASK_21);			/* => mask */
+		WRITE_RPS0(MASK_05 | MASK_21);			/* => values */
+
+		/* turn on video-dma3 */
+		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+		WRITE_RPS0(MASK_04 | MASK_20);			/* => mask */
+		WRITE_RPS0(MASK_04 | MASK_20);			/* => values */
+	}
+
+	/* wait for o_fid_a/b / e_fid_a/b toggle */
+	if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
+		WRITE_RPS0(CMD_PAUSE | o_wait);
+		WRITE_RPS0(CMD_PAUSE | e_wait);
+	} else if ( vv->last_field == V4L2_FIELD_TOP ) {
+		WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
+		WRITE_RPS0(CMD_PAUSE | o_wait);
+	} else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
+		WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
+		WRITE_RPS0(CMD_PAUSE | e_wait);
+	}
+
+	/* turn off video-dma1 */
+	WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+	WRITE_RPS0(MASK_22 | MASK_06);			/* => mask */
+	WRITE_RPS0(MASK_22);				/* => values */
+	if( 0 != planar ) {
+		/* turn off video-dma2 */
+		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+		WRITE_RPS0(MASK_05 | MASK_21);			/* => mask */
+		WRITE_RPS0(MASK_21);				/* => values */
+
+		/* turn off video-dma3 */
+		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+		WRITE_RPS0(MASK_04 | MASK_20);			/* => mask */
+		WRITE_RPS0(MASK_20);				/* => values */
+	}
+
+	/* generate interrupt */
+	WRITE_RPS0(CMD_INTERRUPT);
+
+	/* stop */
+	WRITE_RPS0(CMD_STOP);
+}
+
+void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
+{
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_vv *vv = dev->vv_data;
+	u32 vdma1_prot_addr;
+
+	DEB_CAP("buf:%p, next:%p\n", buf, next);
+
+	vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
+	if( 0 == vdma1_prot_addr ) {
+		/* clear out beginning of streaming bit (rps register 0)*/
+		DEB_CAP("forcing sync to new frame\n");
+		saa7146_write(dev, MC2, MASK_27 );
+	}
+
+	saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
+	saa7146_set_output_format(dev, sfmt->trans);
+	saa7146_disable_clipping(dev);
+
+	if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
+	} else if ( vv->last_field == V4L2_FIELD_TOP ) {
+		vv->last_field = V4L2_FIELD_BOTTOM;
+	} else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
+		vv->last_field = V4L2_FIELD_TOP;
+	}
+
+	if( 0 != IS_PLANAR(sfmt->trans)) {
+		calculate_video_dma_grab_planar(dev, buf);
+		program_capture_engine(dev,1);
+	} else {
+		calculate_video_dma_grab_packed(dev, buf);
+		program_capture_engine(dev,0);
+	}
+
+/*
+	printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
+	printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
+	printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
+	printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
+	printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
+	printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
+	printk("vdma%d => vptr      : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
+*/
+
+	/* write the address of the rps-program */
+	saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
+
+	/* turn on rps */
+	saa7146_write(dev, MC1, (MASK_12 | MASK_28));
+}
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c
new file mode 100644
index 000000000000..7a33fe51775a
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/saa7146_i2c.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "saa7146_vv.h"
+
+static u32 saa7146_i2c_func(struct i2c_adapter *adapter)
+{
+	/* DEB_I2C("'%s'\n", adapter->name); */
+
+	return	  I2C_FUNC_I2C
+		| I2C_FUNC_SMBUS_QUICK
+		| I2C_FUNC_SMBUS_READ_BYTE	| I2C_FUNC_SMBUS_WRITE_BYTE
+		| I2C_FUNC_SMBUS_READ_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+}
+
+/* this function returns the status-register of our i2c-device */
+static inline u32 saa7146_i2c_status(struct saa7146_dev *dev)
+{
+	u32 iicsta = saa7146_read(dev, I2C_STATUS);
+	/* DEB_I2C("status: 0x%08x\n", iicsta); */
+	return iicsta;
+}
+
+/* this function runs through the i2c-messages and prepares the data to be
+   sent through the saa7146. have a look at the specifications p. 122 ff
+   to understand this. it returns the number of u32s to send, or -1
+   in case of an error. */
+static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, __le32 *op)
+{
+	int h1, h2;
+	int i, j, addr;
+	int mem = 0, op_count = 0;
+
+	/* first determine size of needed memory */
+	for(i = 0; i < num; i++) {
+		mem += m[i].len + 1;
+	}
+
+	/* worst case: we need one u32 for three bytes to be send
+	   plus one extra byte to address the device */
+	mem = 1 + ((mem-1) / 3);
+
+	/* we assume that op points to a memory of at least
+	 * SAA7146_I2C_MEM bytes size. if we exceed this limit...
+	 */
+	if ((4 * mem) > SAA7146_I2C_MEM) {
+		/* DEB_I2C("cannot prepare i2c-message\n"); */
+		return -ENOMEM;
+	}
+
+	/* be careful: clear out the i2c-mem first */
+	memset(op,0,sizeof(__le32)*mem);
+
+	/* loop through all messages */
+	for(i = 0; i < num; i++) {
+
+		addr = i2c_8bit_addr_from_msg(&m[i]);
+		h1 = op_count/3; h2 = op_count%3;
+		op[h1] |= cpu_to_le32(	    (u8)addr << ((3-h2)*8));
+		op[h1] |= cpu_to_le32(SAA7146_I2C_START << ((3-h2)*2));
+		op_count++;
+
+		/* loop through all bytes of message i */
+		for(j = 0; j < m[i].len; j++) {
+			/* insert the data bytes */
+			h1 = op_count/3; h2 = op_count%3;
+			op[h1] |= cpu_to_le32( (u32)((u8)m[i].buf[j]) << ((3-h2)*8));
+			op[h1] |= cpu_to_le32(       SAA7146_I2C_CONT << ((3-h2)*2));
+			op_count++;
+		}
+
+	}
+
+	/* have a look at the last byte inserted:
+	  if it was: ...CONT change it to ...STOP */
+	h1 = (op_count-1)/3; h2 = (op_count-1)%3;
+	if ( SAA7146_I2C_CONT == (0x3 & (le32_to_cpu(op[h1]) >> ((3-h2)*2))) ) {
+		op[h1] &= ~cpu_to_le32(0x2 << ((3-h2)*2));
+		op[h1] |= cpu_to_le32(SAA7146_I2C_STOP << ((3-h2)*2));
+	}
+
+	/* return the number of u32s to send */
+	return mem;
+}
+
+/* this functions loops through all i2c-messages. normally, it should determine
+   which bytes were read through the adapter and write them back to the corresponding
+   i2c-message. but instead, we simply write back all bytes.
+   fixme: this could be improved. */
+static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op)
+{
+	int i, j;
+	int op_count = 0;
+
+	/* loop through all messages */
+	for(i = 0; i < num; i++) {
+
+		op_count++;
+
+		/* loop through all bytes of message i */
+		for(j = 0; j < m[i].len; j++) {
+			/* write back all bytes that could have been read */
+			m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8));
+			op_count++;
+		}
+	}
+
+	return 0;
+}
+
+/* this functions resets the i2c-device and returns 0 if everything was fine, otherwise -1 */
+static int saa7146_i2c_reset(struct saa7146_dev *dev)
+{
+	/* get current status */
+	u32 status = saa7146_i2c_status(dev);
+
+	/* clear registers for sure */
+	saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+	saa7146_write(dev, I2C_TRANSFER, 0);
+
+	/* check if any operation is still in progress */
+	if ( 0 != ( status & SAA7146_I2C_BUSY) ) {
+
+		/* yes, kill ongoing operation */
+		DEB_I2C("busy_state detected\n");
+
+		/* set "ABORT-OPERATION"-bit (bit 7)*/
+		saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+
+		/* clear all error-bits pending; this is needed because p.123, note 1 */
+		saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+	}
+
+	/* check if any error is (still) present. (this can be necessary because p.123, note 1) */
+	status = saa7146_i2c_status(dev);
+
+	if ( dev->i2c_bitrate != status ) {
+
+		DEB_I2C("error_state detected. status:0x%08x\n", status);
+
+		/* Repeat the abort operation. This seems to be necessary
+		   after serious protocol errors caused by e.g. the SAA7740 */
+		saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+
+		/* clear all error-bits pending */
+		saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+
+		/* the data sheet says it might be necessary to clear the status
+		   twice after an abort */
+		saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+	}
+
+	/* if any error is still present, a fatal error has occurred ... */
+	status = saa7146_i2c_status(dev);
+	if ( dev->i2c_bitrate != status ) {
+		DEB_I2C("fatal error. status:0x%08x\n", status);
+		return -1;
+	}
+
+	return 0;
+}
+
+/* this functions writes out the data-byte 'dword' to the i2c-device.
+   it returns 0 if ok, -1 if the transfer failed, -2 if the transfer
+   failed badly (e.g. address error) */
+static int saa7146_i2c_writeout(struct saa7146_dev *dev, __le32 *dword, int short_delay)
+{
+	u32 status = 0, mc2 = 0;
+	int trial = 0;
+	unsigned long timeout;
+
+	/* write out i2c-command */
+	DEB_I2C("before: 0x%08x (status: 0x%08x), %d\n",
+		*dword, saa7146_read(dev, I2C_STATUS), dev->i2c_op);
+
+	if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
+
+		saa7146_write(dev, I2C_STATUS,	 dev->i2c_bitrate);
+		saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
+
+		dev->i2c_op = 1;
+		SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
+		SAA7146_IER_ENABLE(dev, MASK_16|MASK_17);
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+
+		timeout = HZ/100 + 1; /* 10ms */
+		timeout = wait_event_interruptible_timeout(dev->i2c_wq, dev->i2c_op == 0, timeout);
+		if (timeout == -ERESTARTSYS || dev->i2c_op) {
+			SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
+			SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
+			if (timeout == -ERESTARTSYS)
+				/* a signal arrived */
+				return -ERESTARTSYS;
+
+			pr_warn("%s %s [irq]: timed out waiting for end of xfer\n",
+				dev->name, __func__);
+			return -EIO;
+		}
+		status = saa7146_read(dev, I2C_STATUS);
+	} else {
+		saa7146_write(dev, I2C_STATUS,	 dev->i2c_bitrate);
+		saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+
+		/* do not poll for i2c-status before upload is complete */
+		timeout = jiffies + HZ/100 + 1; /* 10ms */
+		while(1) {
+			mc2 = (saa7146_read(dev, MC2) & 0x1);
+			if( 0 != mc2 ) {
+				break;
+			}
+			if (time_after(jiffies,timeout)) {
+				pr_warn("%s %s: timed out waiting for MC2\n",
+					dev->name, __func__);
+				return -EIO;
+			}
+		}
+		/* wait until we get a transfer done or error */
+		timeout = jiffies + HZ/100 + 1; /* 10ms */
+		/* first read usually delivers bogus results... */
+		saa7146_i2c_status(dev);
+		while(1) {
+			status = saa7146_i2c_status(dev);
+			if ((status & 0x3) != 1)
+				break;
+			if (time_after(jiffies,timeout)) {
+				/* this is normal when probing the bus
+				 * (no answer from nonexisistant device...)
+				 */
+				pr_warn("%s %s [poll]: timed out waiting for end of xfer\n",
+					dev->name, __func__);
+				return -EIO;
+			}
+			if (++trial < 50 && short_delay)
+				udelay(10);
+			else
+				msleep(1);
+		}
+	}
+
+	/* give a detailed status report */
+	if ( 0 != (status & (SAA7146_I2C_SPERR | SAA7146_I2C_APERR |
+			     SAA7146_I2C_DTERR | SAA7146_I2C_DRERR |
+			     SAA7146_I2C_AL    | SAA7146_I2C_ERR   |
+			     SAA7146_I2C_BUSY)) ) {
+
+		if ( 0 == (status & SAA7146_I2C_ERR) ||
+		     0 == (status & SAA7146_I2C_BUSY) ) {
+			/* it may take some time until ERR goes high - ignore */
+			DEB_I2C("unexpected i2c status %04x\n", status);
+		}
+		if( 0 != (status & SAA7146_I2C_SPERR) ) {
+			DEB_I2C("error due to invalid start/stop condition\n");
+		}
+		if( 0 != (status & SAA7146_I2C_DTERR) ) {
+			DEB_I2C("error in data transmission\n");
+		}
+		if( 0 != (status & SAA7146_I2C_DRERR) ) {
+			DEB_I2C("error when receiving data\n");
+		}
+		if( 0 != (status & SAA7146_I2C_AL) ) {
+			DEB_I2C("error because arbitration lost\n");
+		}
+
+		/* we handle address-errors here */
+		if( 0 != (status & SAA7146_I2C_APERR) ) {
+			DEB_I2C("error in address phase\n");
+			return -EREMOTEIO;
+		}
+
+		return -EIO;
+	}
+
+	/* read back data, just in case we were reading ... */
+	*dword = cpu_to_le32(saa7146_read(dev, I2C_TRANSFER));
+
+	DEB_I2C("after: 0x%08x\n", *dword);
+	return 0;
+}
+
+static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries)
+{
+	int i = 0, count = 0;
+	__le32 *buffer = dev->d_i2c.cpu_addr;
+	int err = 0;
+	int short_delay = 0;
+
+	if (mutex_lock_interruptible(&dev->i2c_lock))
+		return -ERESTARTSYS;
+
+	for(i=0;i<num;i++) {
+		DEB_I2C("msg:%d/%d\n", i+1, num);
+	}
+
+	/* prepare the message(s), get number of u32s to transfer */
+	count = saa7146_i2c_msg_prepare(msgs, num, buffer);
+	if ( 0 > count ) {
+		err = -EIO;
+		goto out;
+	}
+
+	if ( count > 3 || 0 != (SAA7146_I2C_SHORT_DELAY & dev->ext->flags) )
+		short_delay = 1;
+
+	do {
+		/* reset the i2c-device if necessary */
+		err = saa7146_i2c_reset(dev);
+		if ( 0 > err ) {
+			DEB_I2C("could not reset i2c-device\n");
+			goto out;
+		}
+
+		/* write out the u32s one after another */
+		for(i = 0; i < count; i++) {
+			err = saa7146_i2c_writeout(dev, &buffer[i], short_delay);
+			if ( 0 != err) {
+				/* this one is unsatisfying: some i2c slaves on some
+				   dvb cards don't acknowledge correctly, so the saa7146
+				   thinks that an address error occurred. in that case, the
+				   transaction should be retrying, even if an address error
+				   occurred. analog saa7146 based cards extensively rely on
+				   i2c address probing, however, and address errors indicate that a
+				   device is really *not* there. retrying in that case
+				   increases the time the device needs to probe greatly, so
+				   it should be avoided. So we bail out in irq mode after an
+				   address error and trust the saa7146 address error detection. */
+				if (-EREMOTEIO == err && 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags))
+					goto out;
+				DEB_I2C("error while sending message(s). starting again\n");
+				break;
+			}
+		}
+		if( 0 == err ) {
+			err = num;
+			break;
+		}
+
+		/* delay a bit before retrying */
+		msleep(10);
+
+	} while (err != num && retries--);
+
+	/* quit if any error occurred */
+	if (err != num)
+		goto out;
+
+	/* if any things had to be read, get the results */
+	if ( 0 != saa7146_i2c_msg_cleanup(msgs, num, buffer)) {
+		DEB_I2C("could not cleanup i2c-message\n");
+		err = -EIO;
+		goto out;
+	}
+
+	/* return the number of delivered messages */
+	DEB_I2C("transmission successful. (msg:%d)\n", err);
+out:
+	/* another bug in revision 0: the i2c-registers get uploaded randomly by other
+	   uploads, so we better clear them out before continuing */
+	if( 0 == dev->revision ) {
+		__le32 zero = 0;
+		saa7146_i2c_reset(dev);
+		if( 0 != saa7146_i2c_writeout(dev, &zero, short_delay)) {
+			pr_info("revision 0 error. this should never happen\n");
+		}
+	}
+
+	mutex_unlock(&dev->i2c_lock);
+	return err;
+}
+
+/* utility functions */
+static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num)
+{
+	struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter);
+	struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev);
+
+	/* use helper function to transfer data */
+	return saa7146_i2c_transfer(dev, msg, num, adapter->retries);
+}
+
+
+/*****************************************************************************/
+/* i2c-adapter helper functions                                              */
+
+/* exported algorithm data */
+static const struct i2c_algorithm saa7146_algo = {
+	.master_xfer	= saa7146_i2c_xfer,
+	.functionality	= saa7146_i2c_func,
+};
+
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate)
+{
+	DEB_EE("bitrate: 0x%08x\n", bitrate);
+
+	/* enable i2c-port pins */
+	saa7146_write(dev, MC1, (MASK_08 | MASK_24));
+
+	dev->i2c_bitrate = bitrate;
+	saa7146_i2c_reset(dev);
+
+	if (i2c_adapter) {
+		i2c_set_adapdata(i2c_adapter, &dev->v4l2_dev);
+		i2c_adapter->dev.parent    = &dev->pci->dev;
+		i2c_adapter->algo	   = &saa7146_algo;
+		i2c_adapter->algo_data     = NULL;
+		i2c_adapter->timeout = SAA7146_I2C_TIMEOUT;
+		i2c_adapter->retries = SAA7146_I2C_RETRIES;
+	}
+
+	return 0;
+}
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c
new file mode 100644
index 000000000000..2d4a05d7bc5b
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/saa7146_vbi.c
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "saa7146_vv.h"
+
+static int vbi_pixel_to_capture = 720 * 2;
+
+static int vbi_workaround(struct saa7146_dev *dev)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	u32          *cpu;
+	dma_addr_t   dma_addr;
+
+	int count = 0;
+	int i;
+
+	DECLARE_WAITQUEUE(wait, current);
+
+	DEB_VBI("dev:%p\n", dev);
+
+	/* once again, a bug in the saa7146: the brs acquisition
+	   is buggy and especially the BXO-counter does not work
+	   as specified. there is this workaround, but please
+	   don't let me explain it. ;-) */
+
+	cpu = dma_alloc_coherent(&dev->pci->dev, 4096, &dma_addr, GFP_KERNEL);
+	if (NULL == cpu)
+		return -ENOMEM;
+
+	/* setup some basic programming, just for the workaround */
+	saa7146_write(dev, BASE_EVEN3,	dma_addr);
+	saa7146_write(dev, BASE_ODD3,	dma_addr+vbi_pixel_to_capture);
+	saa7146_write(dev, PROT_ADDR3,	dma_addr+4096);
+	saa7146_write(dev, PITCH3,	vbi_pixel_to_capture);
+	saa7146_write(dev, BASE_PAGE3,	0x0);
+	saa7146_write(dev, NUM_LINE_BYTE3, (2<<16)|((vbi_pixel_to_capture)<<0));
+	saa7146_write(dev, MC2, MASK_04|MASK_20);
+
+	/* load brs-control register */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
+	/* BXO = 1h, BRS to outbound */
+	WRITE_RPS1(0xc000008c);
+	/* wait for vbi_a or vbi_b*/
+	if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
+		DEB_D("...using port b\n");
+		WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B);
+		WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B);
+/*
+		WRITE_RPS1(CMD_PAUSE | MASK_09);
+*/
+	} else {
+		DEB_D("...using port a\n");
+		WRITE_RPS1(CMD_PAUSE | MASK_10);
+	}
+	/* upload brs */
+	WRITE_RPS1(CMD_UPLOAD | MASK_08);
+	/* load brs-control register */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
+	/* BYO = 1, BXO = NQBIL (=1728 for PAL, for NTSC this is 858*2) - NumByte3 (=1440) = 288 */
+	WRITE_RPS1(((1728-(vbi_pixel_to_capture)) << 7) | MASK_19);
+	/* wait for brs_done */
+	WRITE_RPS1(CMD_PAUSE | MASK_08);
+	/* upload brs */
+	WRITE_RPS1(CMD_UPLOAD | MASK_08);
+	/* load video-dma3 NumLines3 and NumBytes3 */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (NUM_LINE_BYTE3/4));
+	/* dev->vbi_count*2 lines, 720 pixel (= 1440 Bytes) */
+	WRITE_RPS1((2 << 16) | (vbi_pixel_to_capture));
+	/* load brs-control register */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
+	/* Set BRS right: note: this is an experimental value for BXO (=> PAL!) */
+	WRITE_RPS1((540 << 7) | (5 << 19));  // 5 == vbi_start
+	/* wait for brs_done */
+	WRITE_RPS1(CMD_PAUSE | MASK_08);
+	/* upload brs and video-dma3*/
+	WRITE_RPS1(CMD_UPLOAD | MASK_08 | MASK_04);
+	/* load mc2 register: enable dma3 */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC1/4));
+	WRITE_RPS1(MASK_20 | MASK_04);
+	/* generate interrupt */
+	WRITE_RPS1(CMD_INTERRUPT);
+	/* stop rps1 */
+	WRITE_RPS1(CMD_STOP);
+
+	/* we have to do the workaround twice to be sure that
+	   everything is ok */
+	for(i = 0; i < 2; i++) {
+
+		/* indicate to the irq handler that we do the workaround */
+		saa7146_write(dev, MC2, MASK_31|MASK_15);
+
+		saa7146_write(dev, NUM_LINE_BYTE3, (1<<16)|(2<<0));
+		saa7146_write(dev, MC2, MASK_04|MASK_20);
+
+		/* enable rps1 irqs */
+		SAA7146_IER_ENABLE(dev,MASK_28);
+
+		/* prepare to wait to be woken up by the irq-handler */
+		add_wait_queue(&vv->vbi_wq, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		/* start rps1 to enable workaround */
+		saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+		saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+		schedule();
+
+		DEB_VBI("brs bug workaround %d/1\n", i);
+
+		remove_wait_queue(&vv->vbi_wq, &wait);
+		__set_current_state(TASK_RUNNING);
+
+		/* disable rps1 irqs */
+		SAA7146_IER_DISABLE(dev,MASK_28);
+
+		/* stop video-dma3 */
+		saa7146_write(dev, MC1, MASK_20);
+
+		if(signal_pending(current)) {
+
+			DEB_VBI("aborted (rps:0x%08x)\n",
+				saa7146_read(dev, RPS_ADDR1));
+
+			/* stop rps1 for sure */
+			saa7146_write(dev, MC1, MASK_29);
+
+			dma_free_coherent(&dev->pci->dev, 4096, cpu, dma_addr);
+			return -EINTR;
+		}
+	}
+
+	dma_free_coherent(&dev->pci->dev, 4096, cpu, dma_addr);
+	return 0;
+}
+
+static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	struct saa7146_video_dma vdma3;
+
+	int count = 0;
+	unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
+	unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
+
+/*
+	vdma3.base_even	= 0xc8000000+2560*70;
+	vdma3.base_odd	= 0xc8000000;
+	vdma3.prot_addr	= 0xc8000000+2560*164;
+	vdma3.pitch	= 2560;
+	vdma3.base_page	= 0;
+	vdma3.num_line_byte = (64<<16)|((vbi_pixel_to_capture)<<0); // set above!
+*/
+	vdma3.base_even	= buf->pt[2].offset;
+	vdma3.base_odd	= buf->pt[2].offset + 16 * vbi_pixel_to_capture;
+	vdma3.prot_addr	= buf->pt[2].offset + 16 * 2 * vbi_pixel_to_capture;
+	vdma3.pitch	= vbi_pixel_to_capture;
+	vdma3.base_page	= buf->pt[2].dma | ME1;
+	vdma3.num_line_byte = (16 << 16) | vbi_pixel_to_capture;
+
+	saa7146_write_out_dma(dev, 3, &vdma3);
+
+	/* write beginning of rps-program */
+	count = 0;
+
+	/* wait for o_fid_a/b / e_fid_a/b toggle only if bit 1 is not set */
+
+	/* we don't wait here for the first field anymore. this is different from the video
+	   capture and might cause that the first buffer is only half filled (with only
+	   one field). but since this is some sort of streaming data, this is not that negative.
+	   but by doing this, we can use the whole engine from videobuf-dma-sg.c... */
+
+/*
+	WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait);
+	WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | o_wait);
+*/
+	/* set bit 1 */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC2/4));
+	WRITE_RPS1(MASK_28 | MASK_12);
+
+	/* turn on video-dma3 */
+	WRITE_RPS1(CMD_WR_REG_MASK | (MC1/4));
+	WRITE_RPS1(MASK_04 | MASK_20);			/* => mask */
+	WRITE_RPS1(MASK_04 | MASK_20);			/* => values */
+
+	/* wait for o_fid_a/b / e_fid_a/b toggle */
+	WRITE_RPS1(CMD_PAUSE | o_wait);
+	WRITE_RPS1(CMD_PAUSE | e_wait);
+
+	/* generate interrupt */
+	WRITE_RPS1(CMD_INTERRUPT);
+
+	/* stop */
+	WRITE_RPS1(CMD_STOP);
+
+	/* enable rps1 irqs */
+	SAA7146_IER_ENABLE(dev, MASK_28);
+
+	/* write the address of the rps-program */
+	saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+
+	/* turn on rps */
+	saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+}
+
+static int buffer_activate(struct saa7146_dev *dev,
+			   struct saa7146_buf *buf,
+			   struct saa7146_buf *next)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	buf->vb.state = VIDEOBUF_ACTIVE;
+
+	DEB_VBI("dev:%p, buf:%p, next:%p\n", dev, buf, next);
+	saa7146_set_vbi_capture(dev,buf,next);
+
+	mod_timer(&vv->vbi_dmaq.timeout, jiffies+BUFFER_TIMEOUT);
+	return 0;
+}
+
+static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,enum v4l2_field field)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	int err = 0;
+	int lines, llength, size;
+
+	lines   = 16 * 2 ; /* 2 fields */
+	llength = vbi_pixel_to_capture;
+	size = lines * llength;
+
+	DEB_VBI("vb:%p\n", vb);
+
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < size) {
+		DEB_VBI("size mismatch\n");
+		return -EINVAL;
+	}
+
+	if (buf->vb.size != size)
+		saa7146_dma_free(dev,q,buf);
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
+		buf->vb.width  = llength;
+		buf->vb.height = lines;
+		buf->vb.size   = size;
+		buf->vb.field  = field;	// FIXME: check this
+
+		saa7146_pgtable_free(dev->pci, &buf->pt[2]);
+		saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
+
+		err = videobuf_iolock(q,&buf->vb, NULL);
+		if (err)
+			goto oops;
+		err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2],
+						 dma->sglist, dma->sglen);
+		if (0 != err)
+			return err;
+	}
+	buf->vb.state = VIDEOBUF_PREPARED;
+	buf->activate = buffer_activate;
+
+	return 0;
+
+ oops:
+	DEB_VBI("error out\n");
+	saa7146_dma_free(dev,q,buf);
+
+	return err;
+}
+
+static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
+{
+	int llength,lines;
+
+	lines   = 16 * 2 ; /* 2 fields */
+	llength = vbi_pixel_to_capture;
+
+	*size = lines * llength;
+	*count = 2;
+
+	DEB_VBI("count:%d, size:%d\n", *count, *size);
+
+	return 0;
+}
+
+static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	DEB_VBI("vb:%p\n", vb);
+	saa7146_buffer_queue(dev, &vv->vbi_dmaq, buf);
+}
+
+static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh   = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	DEB_VBI("vb:%p\n", vb);
+	saa7146_dma_free(dev,q,buf);
+}
+
+static const struct videobuf_queue_ops vbi_qops = {
+	.buf_setup    = buffer_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_queue    = buffer_queue,
+	.buf_release  = buffer_release,
+};
+
+/* ------------------------------------------------------------------ */
+
+static void vbi_stop(struct saa7146_fh *fh, struct file *file)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	unsigned long flags;
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	spin_lock_irqsave(&dev->slock,flags);
+
+	/* disable rps1  */
+	saa7146_write(dev, MC1, MASK_29);
+
+	/* disable rps1 irqs */
+	SAA7146_IER_DISABLE(dev, MASK_28);
+
+	/* shut down dma 3 transfers */
+	saa7146_write(dev, MC1, MASK_20);
+
+	if (vv->vbi_dmaq.curr)
+		saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE);
+
+	videobuf_queue_cancel(&fh->vbi_q);
+
+	vv->vbi_streaming = NULL;
+
+	del_timer(&vv->vbi_dmaq.timeout);
+	del_timer(&vv->vbi_read_timeout);
+
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static void vbi_read_timeout(struct timer_list *t)
+{
+	struct saa7146_vv *vv = from_timer(vv, t, vbi_read_timeout);
+	struct file *file = vv->vbi_read_timeout_file;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	vbi_stop(fh, file);
+}
+
+static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
+{
+	DEB_VBI("dev:%p\n", dev);
+
+	INIT_LIST_HEAD(&vv->vbi_dmaq.queue);
+
+	timer_setup(&vv->vbi_dmaq.timeout, saa7146_buffer_timeout, 0);
+	vv->vbi_dmaq.dev              = dev;
+
+	init_waitqueue_head(&vv->vbi_wq);
+}
+
+static int vbi_open(struct saa7146_dev *dev, struct file *file)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_vv *vv = fh->dev->vv_data;
+
+	u32 arbtr_ctrl	= saa7146_read(dev, PCI_BT_V1);
+	int ret = 0;
+
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS);
+	if (0 == ret) {
+		DEB_S("cannot get vbi RESOURCE_DMA3_BRS resource\n");
+		return -EBUSY;
+	}
+
+	/* adjust arbitrition control for video dma 3 */
+	arbtr_ctrl &= ~0x1f0000;
+	arbtr_ctrl |=  0x1d0000;
+	saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
+	saa7146_write(dev, MC2, (MASK_04|MASK_20));
+
+	videobuf_queue_sg_init(&fh->vbi_q, &vbi_qops,
+			    &dev->pci->dev, &dev->slock,
+			    V4L2_BUF_TYPE_VBI_CAPTURE,
+			    V4L2_FIELD_SEQ_TB, // FIXME: does this really work?
+			    sizeof(struct saa7146_buf),
+			    file, &dev->v4l2_lock);
+
+	vv->vbi_read_timeout.function = vbi_read_timeout;
+	vv->vbi_read_timeout_file = file;
+
+	/* initialize the brs */
+	if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
+		saa7146_write(dev, BRS_CTRL, MASK_30|MASK_29 | (7 << 19));
+	} else {
+		saa7146_write(dev, BRS_CTRL, 0x00000001);
+
+		if (0 != (ret = vbi_workaround(dev))) {
+			DEB_VBI("vbi workaround failed!\n");
+			/* return ret;*/
+		}
+	}
+
+	/* upload brs register */
+	saa7146_write(dev, MC2, (MASK_08|MASK_24));
+	return 0;
+}
+
+static void vbi_close(struct saa7146_dev *dev, struct file *file)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_vv *vv = dev->vv_data;
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	if( fh == vv->vbi_streaming ) {
+		vbi_stop(fh, file);
+	}
+	saa7146_res_free(fh, RESOURCE_DMA3_BRS);
+}
+
+static void vbi_irq_done(struct saa7146_dev *dev, unsigned long status)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	spin_lock(&dev->slock);
+
+	if (vv->vbi_dmaq.curr) {
+		DEB_VBI("dev:%p, curr:%p\n", dev, vv->vbi_dmaq.curr);
+		/* this must be += 2, one count for each field */
+		vv->vbi_fieldcount+=2;
+		vv->vbi_dmaq.curr->vb.field_count = vv->vbi_fieldcount;
+		saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE);
+	} else {
+		DEB_VBI("dev:%p\n", dev);
+	}
+	saa7146_buffer_next(dev, &vv->vbi_dmaq, 1);
+
+	spin_unlock(&dev->slock);
+}
+
+static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	ssize_t ret = 0;
+
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	if( NULL == vv->vbi_streaming ) {
+		// fixme: check if dma3 is available
+		// fixme: activate vbi engine here if necessary. (really?)
+		vv->vbi_streaming = fh;
+	}
+
+	if( fh != vv->vbi_streaming ) {
+		DEB_VBI("open %p is already using vbi capture\n",
+			vv->vbi_streaming);
+		return -EBUSY;
+	}
+
+	mod_timer(&vv->vbi_read_timeout, jiffies+BUFFER_TIMEOUT);
+	ret = videobuf_read_stream(&fh->vbi_q, data, count, ppos, 1,
+				   file->f_flags & O_NONBLOCK);
+/*
+	printk("BASE_ODD3:      0x%08x\n", saa7146_read(dev, BASE_ODD3));
+	printk("BASE_EVEN3:     0x%08x\n", saa7146_read(dev, BASE_EVEN3));
+	printk("PROT_ADDR3:     0x%08x\n", saa7146_read(dev, PROT_ADDR3));
+	printk("PITCH3:         0x%08x\n", saa7146_read(dev, PITCH3));
+	printk("BASE_PAGE3:     0x%08x\n", saa7146_read(dev, BASE_PAGE3));
+	printk("NUM_LINE_BYTE3: 0x%08x\n", saa7146_read(dev, NUM_LINE_BYTE3));
+	printk("BRS_CTRL:       0x%08x\n", saa7146_read(dev, BRS_CTRL));
+*/
+	return ret;
+}
+
+const struct saa7146_use_ops saa7146_vbi_uops = {
+	.init		= vbi_init,
+	.open		= vbi_open,
+	.release	= vbi_close,
+	.irq_done	= vbi_irq_done,
+	.read		= vbi_read,
+};
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_video.c b/drivers/staging/media/deprecated/saa7146/common/saa7146_video.c
new file mode 100644
index 000000000000..4598a44231fa
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/saa7146_video.c
@@ -0,0 +1,1286 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/v4l2-event.h>
+#include <media/v4l2-ctrls.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "saa7146_vv.h"
+
+static int max_memory = 32;
+
+module_param(max_memory, int, 0644);
+MODULE_PARM_DESC(max_memory, "maximum memory usage for capture buffers (default: 32Mb)");
+
+#define IS_CAPTURE_ACTIVE(fh) \
+	(((vv->video_status & STATUS_CAPTURE) != 0) && (vv->video_fh == fh))
+
+#define IS_OVERLAY_ACTIVE(fh) \
+	(((vv->video_status & STATUS_OVERLAY) != 0) && (vv->video_fh == fh))
+
+/* format descriptions for capture and preview */
+static struct saa7146_format formats[] = {
+	{
+		.pixelformat	= V4L2_PIX_FMT_RGB332,
+		.trans		= RGB08_COMPOSED,
+		.depth		= 8,
+		.flags		= 0,
+	}, {
+		.pixelformat	= V4L2_PIX_FMT_RGB565,
+		.trans		= RGB16_COMPOSED,
+		.depth		= 16,
+		.flags		= 0,
+	}, {
+		.pixelformat	= V4L2_PIX_FMT_BGR24,
+		.trans		= RGB24_COMPOSED,
+		.depth		= 24,
+		.flags		= 0,
+	}, {
+		.pixelformat	= V4L2_PIX_FMT_BGR32,
+		.trans		= RGB32_COMPOSED,
+		.depth		= 32,
+		.flags		= 0,
+	}, {
+		.pixelformat	= V4L2_PIX_FMT_RGB32,
+		.trans		= RGB32_COMPOSED,
+		.depth		= 32,
+		.flags		= 0,
+		.swap		= 0x2,
+	}, {
+		.pixelformat	= V4L2_PIX_FMT_GREY,
+		.trans		= Y8,
+		.depth		= 8,
+		.flags		= 0,
+	}, {
+		.pixelformat	= V4L2_PIX_FMT_YUV422P,
+		.trans		= YUV422_DECOMPOSED,
+		.depth		= 16,
+		.flags		= FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR,
+	}, {
+		.pixelformat	= V4L2_PIX_FMT_YVU420,
+		.trans		= YUV420_DECOMPOSED,
+		.depth		= 12,
+		.flags		= FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR,
+	}, {
+		.pixelformat	= V4L2_PIX_FMT_YUV420,
+		.trans		= YUV420_DECOMPOSED,
+		.depth		= 12,
+		.flags		= FORMAT_IS_PLANAR,
+	}, {
+		.pixelformat	= V4L2_PIX_FMT_UYVY,
+		.trans		= YUV422_COMPOSED,
+		.depth		= 16,
+		.flags		= 0,
+	}
+};
+
+/* unfortunately, the saa7146 contains a bug which prevents it from doing on-the-fly byte swaps.
+   due to this, it's impossible to provide additional *packed* formats, which are simply byte swapped
+   (like V4L2_PIX_FMT_YUYV) ... 8-( */
+
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(formats); i++) {
+		if (formats[i].pixelformat == fourcc) {
+			return formats+i;
+		}
+	}
+
+	DEB_D("unknown pixelformat:'%4.4s'\n", (char *)&fourcc);
+	return NULL;
+}
+
+static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f);
+
+int saa7146_start_preview(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct v4l2_format fmt;
+	int ret = 0, err = 0;
+
+	DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+	/* check if we have overlay information */
+	if (vv->ov.fh == NULL) {
+		DEB_D("no overlay data available. try S_FMT first.\n");
+		return -EAGAIN;
+	}
+
+	/* check if streaming capture is running */
+	if (IS_CAPTURE_ACTIVE(fh) != 0) {
+		DEB_D("streaming capture is active\n");
+		return -EBUSY;
+	}
+
+	/* check if overlay is running */
+	if (IS_OVERLAY_ACTIVE(fh) != 0) {
+		if (vv->video_fh == fh) {
+			DEB_D("overlay is already active\n");
+			return 0;
+		}
+		DEB_D("overlay is already active in another open\n");
+		return -EBUSY;
+	}
+
+	if (0 == saa7146_res_get(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP)) {
+		DEB_D("cannot get necessary overlay resources\n");
+		return -EBUSY;
+	}
+
+	fmt.fmt.win = vv->ov.win;
+	err = vidioc_try_fmt_vid_overlay(NULL, fh, &fmt);
+	if (0 != err) {
+		saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
+		return -EBUSY;
+	}
+	vv->ov.win = fmt.fmt.win;
+
+	DEB_D("%dx%d+%d+%d 0x%08x field=%s\n",
+	      vv->ov.win.w.width, vv->ov.win.w.height,
+	      vv->ov.win.w.left, vv->ov.win.w.top,
+	      vv->ov_fmt->pixelformat, v4l2_field_names[vv->ov.win.field]);
+
+	if (0 != (ret = saa7146_enable_overlay(fh))) {
+		DEB_D("enabling overlay failed: %d\n", ret);
+		saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
+		return ret;
+	}
+
+	vv->video_status = STATUS_OVERLAY;
+	vv->video_fh = fh;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_start_preview);
+
+int saa7146_stop_preview(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+	/* check if streaming capture is running */
+	if (IS_CAPTURE_ACTIVE(fh) != 0) {
+		DEB_D("streaming capture is active\n");
+		return -EBUSY;
+	}
+
+	/* check if overlay is running at all */
+	if ((vv->video_status & STATUS_OVERLAY) == 0) {
+		DEB_D("no active overlay\n");
+		return 0;
+	}
+
+	if (vv->video_fh != fh) {
+		DEB_D("overlay is active, but in another open\n");
+		return -EBUSY;
+	}
+
+	vv->video_status = 0;
+	vv->video_fh = NULL;
+
+	saa7146_disable_overlay(fh);
+
+	saa7146_res_free(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_stop_preview);
+
+/********************************************************************************/
+/* common pagetable functions */
+
+static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *buf)
+{
+	struct pci_dev *pci = dev->pci;
+	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+	struct scatterlist *list = dma->sglist;
+	int length = dma->sglen;
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+	DEB_EE("dev:%p, buf:%p, sg_len:%d\n", dev, buf, length);
+
+	if( 0 != IS_PLANAR(sfmt->trans)) {
+		struct saa7146_pgtable *pt1 = &buf->pt[0];
+		struct saa7146_pgtable *pt2 = &buf->pt[1];
+		struct saa7146_pgtable *pt3 = &buf->pt[2];
+		__le32  *ptr1, *ptr2, *ptr3;
+		__le32 fill;
+
+		int size = buf->fmt->width*buf->fmt->height;
+		int i,p,m1,m2,m3,o1,o2;
+
+		switch( sfmt->depth ) {
+			case 12: {
+				/* create some offsets inside the page table */
+				m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1;
+				m2 = ((size+(size/4)+PAGE_SIZE)/PAGE_SIZE)-1;
+				m3 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1;
+				o1 = size%PAGE_SIZE;
+				o2 = (size+(size/4))%PAGE_SIZE;
+				DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
+					size, m1, m2, m3, o1, o2);
+				break;
+			}
+			case 16: {
+				/* create some offsets inside the page table */
+				m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1;
+				m2 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1;
+				m3 = ((2*size+PAGE_SIZE)/PAGE_SIZE)-1;
+				o1 = size%PAGE_SIZE;
+				o2 = (size+(size/2))%PAGE_SIZE;
+				DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
+					size, m1, m2, m3, o1, o2);
+				break;
+			}
+			default: {
+				return -1;
+			}
+		}
+
+		ptr1 = pt1->cpu;
+		ptr2 = pt2->cpu;
+		ptr3 = pt3->cpu;
+
+		/* walk all pages, copy all page addresses to ptr1 */
+		for (i = 0; i < length; i++, list++) {
+			for (p = 0; p * 4096 < sg_dma_len(list); p++, ptr1++)
+				*ptr1 = cpu_to_le32(sg_dma_address(list) - list->offset);
+		}
+/*
+		ptr1 = pt1->cpu;
+		for(j=0;j<40;j++) {
+			printk("ptr1 %d: 0x%08x\n",j,ptr1[j]);
+		}
+*/
+
+		/* if we have a user buffer, the first page may not be
+		   aligned to a page boundary. */
+		pt1->offset = dma->sglist->offset;
+		pt2->offset = pt1->offset+o1;
+		pt3->offset = pt1->offset+o2;
+
+		/* create video-dma2 page table */
+		ptr1 = pt1->cpu;
+		for(i = m1; i <= m2 ; i++, ptr2++) {
+			*ptr2 = ptr1[i];
+		}
+		fill = *(ptr2-1);
+		for(;i<1024;i++,ptr2++) {
+			*ptr2 = fill;
+		}
+		/* create video-dma3 page table */
+		ptr1 = pt1->cpu;
+		for(i = m2; i <= m3; i++,ptr3++) {
+			*ptr3 = ptr1[i];
+		}
+		fill = *(ptr3-1);
+		for(;i<1024;i++,ptr3++) {
+			*ptr3 = fill;
+		}
+		/* finally: finish up video-dma1 page table */
+		ptr1 = pt1->cpu+m1;
+		fill = pt1->cpu[m1];
+		for(i=m1;i<1024;i++,ptr1++) {
+			*ptr1 = fill;
+		}
+/*
+		ptr1 = pt1->cpu;
+		ptr2 = pt2->cpu;
+		ptr3 = pt3->cpu;
+		for(j=0;j<40;j++) {
+			printk("ptr1 %d: 0x%08x\n",j,ptr1[j]);
+		}
+		for(j=0;j<40;j++) {
+			printk("ptr2 %d: 0x%08x\n",j,ptr2[j]);
+		}
+		for(j=0;j<40;j++) {
+			printk("ptr3 %d: 0x%08x\n",j,ptr3[j]);
+		}
+*/
+	} else {
+		struct saa7146_pgtable *pt = &buf->pt[0];
+		return saa7146_pgtable_build_single(pci, pt, list, length);
+	}
+
+	return 0;
+}
+
+
+/********************************************************************************/
+/* file operations */
+
+static int video_begin(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_format *fmt = NULL;
+	unsigned int resource;
+	int ret = 0, err = 0;
+
+	DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+	if ((vv->video_status & STATUS_CAPTURE) != 0) {
+		if (vv->video_fh == fh) {
+			DEB_S("already capturing\n");
+			return 0;
+		}
+		DEB_S("already capturing in another open\n");
+		return -EBUSY;
+	}
+
+	if ((vv->video_status & STATUS_OVERLAY) != 0) {
+		DEB_S("warning: suspending overlay video for streaming capture\n");
+		vv->ov_suspend = vv->video_fh;
+		err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
+		if (0 != err) {
+			DEB_D("suspending video failed. aborting\n");
+			return err;
+		}
+	}
+
+	fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat);
+	/* we need to have a valid format set here */
+	if (!fmt)
+		return -EINVAL;
+
+	if (0 != (fmt->flags & FORMAT_IS_PLANAR)) {
+		resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS;
+	} else {
+		resource = RESOURCE_DMA1_HPS;
+	}
+
+	ret = saa7146_res_get(fh, resource);
+	if (0 == ret) {
+		DEB_S("cannot get capture resource %d\n", resource);
+		if (vv->ov_suspend != NULL) {
+			saa7146_start_preview(vv->ov_suspend);
+			vv->ov_suspend = NULL;
+		}
+		return -EBUSY;
+	}
+
+	/* clear out beginning of streaming bit (rps register 0)*/
+	saa7146_write(dev, MC2, MASK_27 );
+
+	/* enable rps0 irqs */
+	SAA7146_IER_ENABLE(dev, MASK_27);
+
+	vv->video_fh = fh;
+	vv->video_status = STATUS_CAPTURE;
+
+	return 0;
+}
+
+static int video_end(struct saa7146_fh *fh, struct file *file)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_dmaqueue *q = &vv->video_dmaq;
+	struct saa7146_format *fmt = NULL;
+	unsigned long flags;
+	unsigned int resource;
+	u32 dmas = 0;
+	DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+	if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
+		DEB_S("not capturing\n");
+		return 0;
+	}
+
+	if (vv->video_fh != fh) {
+		DEB_S("capturing, but in another open\n");
+		return -EBUSY;
+	}
+
+	fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat);
+	/* we need to have a valid format set here */
+	if (!fmt)
+		return -EINVAL;
+
+	if (0 != (fmt->flags & FORMAT_IS_PLANAR)) {
+		resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS;
+		dmas = MASK_22 | MASK_21 | MASK_20;
+	} else {
+		resource = RESOURCE_DMA1_HPS;
+		dmas = MASK_22;
+	}
+	spin_lock_irqsave(&dev->slock,flags);
+
+	/* disable rps0  */
+	saa7146_write(dev, MC1, MASK_28);
+
+	/* disable rps0 irqs */
+	SAA7146_IER_DISABLE(dev, MASK_27);
+
+	/* shut down all used video dma transfers */
+	saa7146_write(dev, MC1, dmas);
+
+	if (q->curr)
+		saa7146_buffer_finish(dev, q, VIDEOBUF_DONE);
+
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	vv->video_fh = NULL;
+	vv->video_status = 0;
+
+	saa7146_res_free(fh, resource);
+
+	if (vv->ov_suspend != NULL) {
+		saa7146_start_preview(vv->ov_suspend);
+		vv->ov_suspend = NULL;
+	}
+
+	return 0;
+}
+
+static int vidioc_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+
+	strscpy((char *)cap->driver, "saa7146 v4l2", sizeof(cap->driver));
+	strscpy((char *)cap->card, dev->ext->name, sizeof(cap->card));
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY |
+			    V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
+			    V4L2_CAP_DEVICE_CAPS;
+	cap->capabilities |= dev->ext_vv_data->capabilities;
+	return 0;
+}
+
+static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	*fb = vv->ov_fb;
+	fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING;
+	fb->flags = V4L2_FBUF_FLAG_PRIMARY;
+	return 0;
+}
+
+static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *fb)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_format *fmt;
+
+	DEB_EE("VIDIOC_S_FBUF\n");
+
+	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
+	/* check args */
+	fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat);
+	if (NULL == fmt)
+		return -EINVAL;
+
+	/* planar formats are not allowed for overlay video, clipping and video dma would clash */
+	if (fmt->flags & FORMAT_IS_PLANAR)
+		DEB_S("planar pixelformat '%4.4s' not allowed for overlay\n",
+		      (char *)&fmt->pixelformat);
+
+	/* check if overlay is running */
+	if (IS_OVERLAY_ACTIVE(fh) != 0) {
+		if (vv->video_fh != fh) {
+			DEB_D("refusing to change framebuffer information while overlay is active in another open\n");
+			return -EBUSY;
+		}
+	}
+
+	/* ok, accept it */
+	vv->ov_fb = *fb;
+	vv->ov_fmt = fmt;
+
+	if (vv->ov_fb.fmt.bytesperline < vv->ov_fb.fmt.width) {
+		vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8;
+		DEB_D("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline);
+	}
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f)
+{
+	if (f->index >= ARRAY_SIZE(formats))
+		return -EINVAL;
+	f->pixelformat = formats[f->index].pixelformat;
+	return 0;
+}
+
+int saa7146_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct saa7146_dev *dev = container_of(ctrl->handler,
+				struct saa7146_dev, ctrl_handler);
+	struct saa7146_vv *vv = dev->vv_data;
+	u32 val;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		val = saa7146_read(dev, BCS_CTRL);
+		val &= 0x00ffffff;
+		val |= (ctrl->val << 24);
+		saa7146_write(dev, BCS_CTRL, val);
+		saa7146_write(dev, MC2, MASK_22 | MASK_06);
+		break;
+
+	case V4L2_CID_CONTRAST:
+		val = saa7146_read(dev, BCS_CTRL);
+		val &= 0xff00ffff;
+		val |= (ctrl->val << 16);
+		saa7146_write(dev, BCS_CTRL, val);
+		saa7146_write(dev, MC2, MASK_22 | MASK_06);
+		break;
+
+	case V4L2_CID_SATURATION:
+		val = saa7146_read(dev, BCS_CTRL);
+		val &= 0xffffff00;
+		val |= (ctrl->val << 0);
+		saa7146_write(dev, BCS_CTRL, val);
+		saa7146_write(dev, MC2, MASK_22 | MASK_06);
+		break;
+
+	case V4L2_CID_HFLIP:
+		/* fixme: we can support changing VFLIP and HFLIP here... */
+		if ((vv->video_status & STATUS_CAPTURE))
+			return -EBUSY;
+		vv->hflip = ctrl->val;
+		break;
+
+	case V4L2_CID_VFLIP:
+		if ((vv->video_status & STATUS_CAPTURE))
+			return -EBUSY;
+		vv->vflip = ctrl->val;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if ((vv->video_status & STATUS_OVERLAY) != 0) { /* CHECK: && (vv->video_fh == fh)) */
+		struct saa7146_fh *fh = vv->video_fh;
+
+		saa7146_stop_preview(fh);
+		saa7146_start_preview(fh);
+	}
+	return 0;
+}
+
+static int vidioc_g_parm(struct file *file, void *fh,
+		struct v4l2_streamparm *parm)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	parm->parm.capture.readbuffers = 1;
+	v4l2_video_std_frame_period(vv->standard->id,
+				    &parm->parm.capture.timeperframe);
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	f->fmt.pix = vv->video_fmt;
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	f->fmt.win = vv->ov.win;
+	return 0;
+}
+
+static int vidioc_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	f->fmt.vbi = vv->vbi_fmt;
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_format *fmt;
+	enum v4l2_field field;
+	int maxw, maxh;
+	int calc_bpl;
+
+	DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
+
+	fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
+	if (NULL == fmt)
+		return -EINVAL;
+
+	field = f->fmt.pix.field;
+	maxw  = vv->standard->h_max_out;
+	maxh  = vv->standard->v_max_out;
+
+	if (V4L2_FIELD_ANY == field) {
+		field = (f->fmt.pix.height > maxh / 2)
+			? V4L2_FIELD_INTERLACED
+			: V4L2_FIELD_BOTTOM;
+	}
+	switch (field) {
+	case V4L2_FIELD_ALTERNATE:
+		vv->last_field = V4L2_FIELD_TOP;
+		maxh = maxh / 2;
+		break;
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+		vv->last_field = V4L2_FIELD_INTERLACED;
+		maxh = maxh / 2;
+		break;
+	case V4L2_FIELD_INTERLACED:
+		vv->last_field = V4L2_FIELD_INTERLACED;
+		break;
+	default:
+		DEB_D("no known field mode '%d'\n", field);
+		return -EINVAL;
+	}
+
+	f->fmt.pix.field = field;
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	if (f->fmt.pix.width > maxw)
+		f->fmt.pix.width = maxw;
+	if (f->fmt.pix.height > maxh)
+		f->fmt.pix.height = maxh;
+
+	calc_bpl = (f->fmt.pix.width * fmt->depth) / 8;
+
+	if (f->fmt.pix.bytesperline < calc_bpl)
+		f->fmt.pix.bytesperline = calc_bpl;
+
+	if (f->fmt.pix.bytesperline > (2 * PAGE_SIZE * fmt->depth) / 8) /* arbitrary constraint */
+		f->fmt.pix.bytesperline = calc_bpl;
+
+	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
+	DEB_D("w:%d, h:%d, bytesperline:%d, sizeimage:%d\n",
+	      f->fmt.pix.width, f->fmt.pix.height,
+	      f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
+
+	return 0;
+}
+
+
+static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct v4l2_window *win = &f->fmt.win;
+	enum v4l2_field field;
+	int maxw, maxh;
+
+	DEB_EE("dev:%p\n", dev);
+
+	if (NULL == vv->ov_fb.base) {
+		DEB_D("no fb base set\n");
+		return -EINVAL;
+	}
+	if (NULL == vv->ov_fmt) {
+		DEB_D("no fb fmt set\n");
+		return -EINVAL;
+	}
+	if (win->w.width < 48 || win->w.height < 32) {
+		DEB_D("min width/height. (%d,%d)\n",
+		      win->w.width, win->w.height);
+		return -EINVAL;
+	}
+	if (win->clipcount > 16) {
+		DEB_D("clipcount too big\n");
+		return -EINVAL;
+	}
+
+	field = win->field;
+	maxw  = vv->standard->h_max_out;
+	maxh  = vv->standard->v_max_out;
+
+	if (V4L2_FIELD_ANY == field) {
+		field = (win->w.height > maxh / 2)
+			? V4L2_FIELD_INTERLACED
+			: V4L2_FIELD_TOP;
+		}
+	switch (field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+	case V4L2_FIELD_ALTERNATE:
+		maxh = maxh / 2;
+		break;
+	case V4L2_FIELD_INTERLACED:
+		break;
+	default:
+		DEB_D("no known field mode '%d'\n", field);
+		return -EINVAL;
+	}
+
+	win->field = field;
+	if (win->w.width > maxw)
+		win->w.width = maxw;
+	if (win->w.height > maxh)
+		win->w.height = maxh;
+
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *__fh, struct v4l2_format *f)
+{
+	struct saa7146_fh *fh = __fh;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	int err;
+
+	DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
+	if (IS_CAPTURE_ACTIVE(fh) != 0) {
+		DEB_EE("streaming capture is active\n");
+		return -EBUSY;
+	}
+	err = vidioc_try_fmt_vid_cap(file, fh, f);
+	if (0 != err)
+		return err;
+	vv->video_fmt = f->fmt.pix;
+	DEB_EE("set to pixelformat '%4.4s'\n",
+	       (char *)&vv->video_fmt.pixelformat);
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_overlay(struct file *file, void *__fh, struct v4l2_format *f)
+{
+	struct saa7146_fh *fh = __fh;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	int err;
+
+	DEB_EE("V4L2_BUF_TYPE_VIDEO_OVERLAY: dev:%p, fh:%p\n", dev, fh);
+	err = vidioc_try_fmt_vid_overlay(file, fh, f);
+	if (0 != err)
+		return err;
+	vv->ov.win    = f->fmt.win;
+	vv->ov.nclips = f->fmt.win.clipcount;
+	if (vv->ov.nclips > 16)
+		vv->ov.nclips = 16;
+	memcpy(vv->ov.clips, f->fmt.win.clips,
+	       sizeof(struct v4l2_clip) * vv->ov.nclips);
+
+	/* vv->ov.fh is used to indicate that we have valid overlay information, too */
+	vv->ov.fh = fh;
+
+	/* check if our current overlay is active */
+	if (IS_OVERLAY_ACTIVE(fh) != 0) {
+		saa7146_stop_preview(fh);
+		saa7146_start_preview(fh);
+	}
+	return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *fh, v4l2_std_id *norm)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	*norm = vv->standard->id;
+	return 0;
+}
+
+	/* the saa7146 supfhrts (used in conjunction with the saa7111a for example)
+	   PAL / NTSC / SECAM. if your hardware does not (or does more)
+	   -- override this function in your extension */
+/*
+	case VIDIOC_ENUMSTD:
+	{
+		struct v4l2_standard *e = arg;
+		if (e->index < 0 )
+			return -EINVAL;
+		if( e->index < dev->ext_vv_data->num_stds ) {
+			DEB_EE("VIDIOC_ENUMSTD: index:%d\n", e->index);
+			v4l2_video_std_construct(e, dev->ext_vv_data->stds[e->index].id, dev->ext_vv_data->stds[e->index].name);
+			return 0;
+		}
+		return -EINVAL;
+	}
+	*/
+
+static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id id)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	int found = 0;
+	int err, i;
+
+	DEB_EE("VIDIOC_S_STD\n");
+
+	if ((vv->video_status & STATUS_CAPTURE) == STATUS_CAPTURE) {
+		DEB_D("cannot change video standard while streaming capture is active\n");
+		return -EBUSY;
+	}
+
+	if ((vv->video_status & STATUS_OVERLAY) != 0) {
+		vv->ov_suspend = vv->video_fh;
+		err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
+		if (0 != err) {
+			DEB_D("suspending video failed. aborting\n");
+			return err;
+		}
+	}
+
+	for (i = 0; i < dev->ext_vv_data->num_stds; i++)
+		if (id & dev->ext_vv_data->stds[i].id)
+			break;
+	if (i != dev->ext_vv_data->num_stds) {
+		vv->standard = &dev->ext_vv_data->stds[i];
+		if (NULL != dev->ext_vv_data->std_callback)
+			dev->ext_vv_data->std_callback(dev, vv->standard);
+		found = 1;
+	}
+
+	if (vv->ov_suspend != NULL) {
+		saa7146_start_preview(vv->ov_suspend);
+		vv->ov_suspend = NULL;
+	}
+
+	if (!found) {
+		DEB_EE("VIDIOC_S_STD: standard not found\n");
+		return -EINVAL;
+	}
+
+	DEB_EE("VIDIOC_S_STD: set to standard to '%s'\n", vv->standard->name);
+	return 0;
+}
+
+static int vidioc_overlay(struct file *file, void *fh, unsigned int on)
+{
+	int err;
+
+	DEB_D("VIDIOC_OVERLAY on:%d\n", on);
+	if (on)
+		err = saa7146_start_preview(fh);
+	else
+		err = saa7146_stop_preview(fh);
+	return err;
+}
+
+static int vidioc_reqbufs(struct file *file, void *__fh, struct v4l2_requestbuffers *b)
+{
+	struct saa7146_fh *fh = __fh;
+
+	if (b->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_reqbufs(&fh->video_q, b);
+	if (b->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_reqbufs(&fh->vbi_q, b);
+	return -EINVAL;
+}
+
+static int vidioc_querybuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
+{
+	struct saa7146_fh *fh = __fh;
+
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_querybuf(&fh->video_q, buf);
+	if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_querybuf(&fh->vbi_q, buf);
+	return -EINVAL;
+}
+
+static int vidioc_qbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
+{
+	struct saa7146_fh *fh = __fh;
+
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_qbuf(&fh->video_q, buf);
+	if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_qbuf(&fh->vbi_q, buf);
+	return -EINVAL;
+}
+
+static int vidioc_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
+{
+	struct saa7146_fh *fh = __fh;
+
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_dqbuf(&fh->video_q, buf, file->f_flags & O_NONBLOCK);
+	if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_dqbuf(&fh->vbi_q, buf, file->f_flags & O_NONBLOCK);
+	return -EINVAL;
+}
+
+static int vidioc_streamon(struct file *file, void *__fh, enum v4l2_buf_type type)
+{
+	struct saa7146_fh *fh = __fh;
+	int err;
+
+	DEB_D("VIDIOC_STREAMON, type:%d\n", type);
+
+	err = video_begin(fh);
+	if (err)
+		return err;
+	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_streamon(&fh->video_q);
+	if (type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_streamon(&fh->vbi_q);
+	return -EINVAL;
+}
+
+static int vidioc_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type)
+{
+	struct saa7146_fh *fh = __fh;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	int err;
+
+	DEB_D("VIDIOC_STREAMOFF, type:%d\n", type);
+
+	/* ugly: we need to copy some checks from video_end(),
+	   because videobuf_streamoff() relies on the capture running.
+	   check and fix this */
+	if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
+		DEB_S("not capturing\n");
+		return 0;
+	}
+
+	if (vv->video_fh != fh) {
+		DEB_S("capturing, but in another open\n");
+		return -EBUSY;
+	}
+
+	err = -EINVAL;
+	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		err = videobuf_streamoff(&fh->video_q);
+	else if (type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		err = videobuf_streamoff(&fh->vbi_q);
+	if (0 != err) {
+		DEB_D("warning: videobuf_streamoff() failed\n");
+		video_end(fh, file);
+	} else {
+		err = video_end(fh, file);
+	}
+	return err;
+}
+
+const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
+	.vidioc_querycap             = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap     = vidioc_enum_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap        = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap      = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap        = vidioc_s_fmt_vid_cap,
+	.vidioc_g_fmt_vid_overlay    = vidioc_g_fmt_vid_overlay,
+	.vidioc_try_fmt_vid_overlay  = vidioc_try_fmt_vid_overlay,
+	.vidioc_s_fmt_vid_overlay    = vidioc_s_fmt_vid_overlay,
+
+	.vidioc_overlay		     = vidioc_overlay,
+	.vidioc_g_fbuf		     = vidioc_g_fbuf,
+	.vidioc_s_fbuf		     = vidioc_s_fbuf,
+	.vidioc_reqbufs              = vidioc_reqbufs,
+	.vidioc_querybuf             = vidioc_querybuf,
+	.vidioc_qbuf                 = vidioc_qbuf,
+	.vidioc_dqbuf                = vidioc_dqbuf,
+	.vidioc_g_std                = vidioc_g_std,
+	.vidioc_s_std                = vidioc_s_std,
+	.vidioc_streamon             = vidioc_streamon,
+	.vidioc_streamoff            = vidioc_streamoff,
+	.vidioc_g_parm		     = vidioc_g_parm,
+	.vidioc_subscribe_event      = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event    = v4l2_event_unsubscribe,
+};
+
+const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops = {
+	.vidioc_querycap             = vidioc_querycap,
+	.vidioc_g_fmt_vbi_cap        = vidioc_g_fmt_vbi_cap,
+
+	.vidioc_reqbufs              = vidioc_reqbufs,
+	.vidioc_querybuf             = vidioc_querybuf,
+	.vidioc_qbuf                 = vidioc_qbuf,
+	.vidioc_dqbuf                = vidioc_dqbuf,
+	.vidioc_g_std                = vidioc_g_std,
+	.vidioc_s_std                = vidioc_s_std,
+	.vidioc_streamon             = vidioc_streamon,
+	.vidioc_streamoff            = vidioc_streamoff,
+	.vidioc_g_parm		     = vidioc_g_parm,
+	.vidioc_subscribe_event      = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event    = v4l2_event_unsubscribe,
+};
+
+/*********************************************************************************/
+/* buffer handling functions                                                  */
+
+static int buffer_activate (struct saa7146_dev *dev,
+		     struct saa7146_buf *buf,
+		     struct saa7146_buf *next)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	buf->vb.state = VIDEOBUF_ACTIVE;
+	saa7146_set_capture(dev,buf,next);
+
+	mod_timer(&vv->video_dmaq.timeout, jiffies+BUFFER_TIMEOUT);
+	return 0;
+}
+
+static void release_all_pagetables(struct saa7146_dev *dev, struct saa7146_buf *buf)
+{
+	saa7146_pgtable_free(dev->pci, &buf->pt[0]);
+	saa7146_pgtable_free(dev->pci, &buf->pt[1]);
+	saa7146_pgtable_free(dev->pci, &buf->pt[2]);
+}
+
+static int buffer_prepare(struct videobuf_queue *q,
+			  struct videobuf_buffer *vb, enum v4l2_field field)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+	int size,err = 0;
+
+	DEB_CAP("vbuf:%p\n", vb);
+
+	/* sanity checks */
+	if (vv->video_fmt.width  < 48 ||
+	    vv->video_fmt.height < 32 ||
+	    vv->video_fmt.width  > vv->standard->h_max_out ||
+	    vv->video_fmt.height > vv->standard->v_max_out) {
+		DEB_D("w (%d) / h (%d) out of bounds\n",
+		      vv->video_fmt.width, vv->video_fmt.height);
+		return -EINVAL;
+	}
+
+	size = vv->video_fmt.sizeimage;
+	if (0 != buf->vb.baddr && buf->vb.bsize < size) {
+		DEB_D("size mismatch\n");
+		return -EINVAL;
+	}
+
+	DEB_CAP("buffer_prepare [size=%dx%d,bytes=%d,fields=%s]\n",
+		vv->video_fmt.width, vv->video_fmt.height,
+		size, v4l2_field_names[vv->video_fmt.field]);
+	if (buf->vb.width  != vv->video_fmt.width  ||
+	    buf->vb.bytesperline != vv->video_fmt.bytesperline ||
+	    buf->vb.height != vv->video_fmt.height ||
+	    buf->vb.size   != size ||
+	    buf->vb.field  != field      ||
+	    buf->vb.field  != vv->video_fmt.field  ||
+	    buf->fmt       != &vv->video_fmt) {
+		saa7146_dma_free(dev,q,buf);
+	}
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		struct saa7146_format *sfmt;
+
+		buf->vb.bytesperline  = vv->video_fmt.bytesperline;
+		buf->vb.width  = vv->video_fmt.width;
+		buf->vb.height = vv->video_fmt.height;
+		buf->vb.size   = size;
+		buf->vb.field  = field;
+		buf->fmt       = &vv->video_fmt;
+		buf->vb.field  = vv->video_fmt.field;
+
+		sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+		release_all_pagetables(dev, buf);
+		if( 0 != IS_PLANAR(sfmt->trans)) {
+			saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
+			saa7146_pgtable_alloc(dev->pci, &buf->pt[1]);
+			saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
+		} else {
+			saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
+		}
+
+		err = videobuf_iolock(q,&buf->vb, &vv->ov_fb);
+		if (err)
+			goto oops;
+		err = saa7146_pgtable_build(dev,buf);
+		if (err)
+			goto oops;
+	}
+	buf->vb.state = VIDEOBUF_PREPARED;
+	buf->activate = buffer_activate;
+
+	return 0;
+
+ oops:
+	DEB_D("error out\n");
+	saa7146_dma_free(dev,q,buf);
+
+	return err;
+}
+
+static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_vv *vv = fh->dev->vv_data;
+
+	if (0 == *count || *count > MAX_SAA7146_CAPTURE_BUFFERS)
+		*count = MAX_SAA7146_CAPTURE_BUFFERS;
+
+	*size = vv->video_fmt.sizeimage;
+
+	/* check if we exceed the "max_memory" parameter */
+	if( (*count * *size) > (max_memory*1048576) ) {
+		*count = (max_memory*1048576) / *size;
+	}
+
+	DEB_CAP("%d buffers, %d bytes each\n", *count, *size);
+
+	return 0;
+}
+
+static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	DEB_CAP("vbuf:%p\n", vb);
+	saa7146_buffer_queue(fh->dev, &vv->video_dmaq, buf);
+}
+
+static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	DEB_CAP("vbuf:%p\n", vb);
+
+	saa7146_dma_free(dev,q,buf);
+
+	release_all_pagetables(dev, buf);
+}
+
+static const struct videobuf_queue_ops video_qops = {
+	.buf_setup    = buffer_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_queue    = buffer_queue,
+	.buf_release  = buffer_release,
+};
+
+/********************************************************************************/
+/* file operations */
+
+static void video_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
+{
+	INIT_LIST_HEAD(&vv->video_dmaq.queue);
+
+	timer_setup(&vv->video_dmaq.timeout, saa7146_buffer_timeout, 0);
+	vv->video_dmaq.dev              = dev;
+
+	/* set some default values */
+	vv->standard = &dev->ext_vv_data->stds[0];
+
+	/* FIXME: what's this? */
+	vv->current_hps_source = SAA7146_HPS_SOURCE_PORT_A;
+	vv->current_hps_sync = SAA7146_HPS_SYNC_PORT_A;
+}
+
+
+static int video_open(struct saa7146_dev *dev, struct file *file)
+{
+	struct saa7146_fh *fh = file->private_data;
+
+	videobuf_queue_sg_init(&fh->video_q, &video_qops,
+			    &dev->pci->dev, &dev->slock,
+			    V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			    V4L2_FIELD_INTERLACED,
+			    sizeof(struct saa7146_buf),
+			    file, &dev->v4l2_lock);
+
+	return 0;
+}
+
+
+static void video_close(struct saa7146_dev *dev, struct file *file)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct videobuf_queue *q = &fh->video_q;
+
+	if (IS_CAPTURE_ACTIVE(fh) != 0)
+		video_end(fh, file);
+	else if (IS_OVERLAY_ACTIVE(fh) != 0)
+		saa7146_stop_preview(fh);
+
+	videobuf_stop(q);
+	/* hmm, why is this function declared void? */
+}
+
+
+static void video_irq_done(struct saa7146_dev *dev, unsigned long st)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_dmaqueue *q = &vv->video_dmaq;
+
+	spin_lock(&dev->slock);
+	DEB_CAP("called\n");
+
+	/* only finish the buffer if we have one... */
+	if( NULL != q->curr ) {
+		saa7146_buffer_finish(dev,q,VIDEOBUF_DONE);
+	}
+	saa7146_buffer_next(dev,q,0);
+
+	spin_unlock(&dev->slock);
+}
+
+static ssize_t video_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	ssize_t ret = 0;
+
+	DEB_EE("called\n");
+
+	if ((vv->video_status & STATUS_CAPTURE) != 0) {
+		/* fixme: should we allow read() captures while streaming capture? */
+		if (vv->video_fh == fh) {
+			DEB_S("already capturing\n");
+			return -EBUSY;
+		}
+		DEB_S("already capturing in another open\n");
+		return -EBUSY;
+	}
+
+	ret = video_begin(fh);
+	if( 0 != ret) {
+		goto out;
+	}
+
+	ret = videobuf_read_one(&fh->video_q , data, count, ppos,
+				file->f_flags & O_NONBLOCK);
+	if (ret != 0) {
+		video_end(fh, file);
+	} else {
+		ret = video_end(fh, file);
+	}
+out:
+	/* restart overlay if it was active before */
+	if (vv->ov_suspend != NULL) {
+		saa7146_start_preview(vv->ov_suspend);
+		vv->ov_suspend = NULL;
+	}
+
+	return ret;
+}
+
+const struct saa7146_use_ops saa7146_video_uops = {
+	.init = video_init,
+	.open = video_open,
+	.release = video_close,
+	.irq_done = video_irq_done,
+	.read = video_read,
+};
diff --git a/drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h b/drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h
new file mode 100644
index 000000000000..d7bd916fe3ad
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/common/saa7146_vv.h
@@ -0,0 +1,266 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __SAA7146_VV__
+#define __SAA7146_VV__
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/videobuf-dma-sg.h>
+#include "saa7146.h"
+
+#define MAX_SAA7146_CAPTURE_BUFFERS	32	/* arbitrary */
+#define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
+
+#define WRITE_RPS0(x) do { \
+	dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \
+	} while (0);
+
+#define WRITE_RPS1(x) do { \
+	dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \
+	} while (0);
+
+struct	saa7146_video_dma {
+	u32 base_odd;
+	u32 base_even;
+	u32 prot_addr;
+	u32 pitch;
+	u32 base_page;
+	u32 num_line_byte;
+};
+
+#define FORMAT_BYTE_SWAP	0x1
+#define FORMAT_IS_PLANAR	0x2
+
+struct saa7146_format {
+	u32	pixelformat;
+	u32	trans;
+	u8	depth;
+	u8	flags;
+	u8	swap;
+};
+
+struct saa7146_standard
+{
+	char          *name;
+	v4l2_std_id   id;
+
+	int v_offset;	/* number of lines of vertical offset before processing */
+	int v_field;	/* number of lines in a field for HPS to process */
+
+	int h_offset;	/* horizontal offset of processing window */
+	int h_pixels;	/* number of horizontal pixels to process */
+
+	int v_max_out;
+	int h_max_out;
+};
+
+/* buffer for one video/vbi frame */
+struct saa7146_buf {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+
+	/* saa7146 specific */
+	struct v4l2_pix_format  *fmt;
+	int (*activate)(struct saa7146_dev *dev,
+			struct saa7146_buf *buf,
+			struct saa7146_buf *next);
+
+	/* page tables */
+	struct saa7146_pgtable  pt[3];
+};
+
+struct saa7146_dmaqueue {
+	struct saa7146_dev	*dev;
+	struct saa7146_buf	*curr;
+	struct list_head	queue;
+	struct timer_list	timeout;
+};
+
+struct saa7146_overlay {
+	struct saa7146_fh	*fh;
+	struct v4l2_window	win;
+	struct v4l2_clip	clips[16];
+	int			nclips;
+};
+
+/* per open data */
+struct saa7146_fh {
+	/* Must be the first field! */
+	struct v4l2_fh		fh;
+	struct saa7146_dev	*dev;
+
+	/* video capture */
+	struct videobuf_queue	video_q;
+
+	/* vbi capture */
+	struct videobuf_queue	vbi_q;
+
+	unsigned int resources;	/* resource management for device open */
+};
+
+#define STATUS_OVERLAY	0x01
+#define STATUS_CAPTURE	0x02
+
+struct saa7146_vv
+{
+	/* vbi capture */
+	struct saa7146_dmaqueue		vbi_dmaq;
+	struct v4l2_vbi_format		vbi_fmt;
+	struct timer_list		vbi_read_timeout;
+	struct file			*vbi_read_timeout_file;
+	/* vbi workaround interrupt queue */
+	wait_queue_head_t		vbi_wq;
+	int				vbi_fieldcount;
+	struct saa7146_fh		*vbi_streaming;
+
+	int				video_status;
+	struct saa7146_fh		*video_fh;
+
+	/* video overlay */
+	struct saa7146_overlay		ov;
+	struct v4l2_framebuffer		ov_fb;
+	struct saa7146_format		*ov_fmt;
+	struct saa7146_fh		*ov_suspend;
+
+	/* video capture */
+	struct saa7146_dmaqueue		video_dmaq;
+	struct v4l2_pix_format		video_fmt;
+	enum v4l2_field			last_field;
+
+	/* common: fixme? shouldn't this be in saa7146_fh?
+	   (this leads to a more complicated question: shall the driver
+	   store the different settings (for example S_INPUT) for every open
+	   and restore it appropriately, or should all settings be common for
+	   all opens? currently, we do the latter, like all other
+	   drivers do... */
+	struct saa7146_standard	*standard;
+
+	int	vflip;
+	int	hflip;
+	int	current_hps_source;
+	int	current_hps_sync;
+
+	struct saa7146_dma	d_clipping;	/* pointer to clipping memory */
+
+	unsigned int resources;	/* resource management for device */
+};
+
+/* flags */
+#define SAA7146_USE_PORT_B_FOR_VBI	0x2     /* use input port b for vbi hardware bug workaround */
+
+struct saa7146_ext_vv
+{
+	/* information about the video capabilities of the device */
+	int	inputs;
+	int	audios;
+	u32	capabilities;
+	int	flags;
+
+	/* additionally supported transmission standards */
+	struct saa7146_standard *stds;
+	int num_stds;
+	int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *);
+
+	/* the extension can override this */
+	struct v4l2_ioctl_ops vid_ops;
+	struct v4l2_ioctl_ops vbi_ops;
+	/* pointer to the saa7146 core ops */
+	const struct v4l2_ioctl_ops *core_ops;
+
+	struct v4l2_file_operations vbi_fops;
+};
+
+struct saa7146_use_ops  {
+	void (*init)(struct saa7146_dev *, struct saa7146_vv *);
+	int(*open)(struct saa7146_dev *, struct file *);
+	void (*release)(struct saa7146_dev *, struct file *);
+	void (*irq_done)(struct saa7146_dev *, unsigned long status);
+	ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
+};
+
+/* from saa7146_fops.c */
+int saa7146_register_device(struct video_device *vid, struct saa7146_dev *dev, char *name, int type);
+int saa7146_unregister_device(struct video_device *vid, struct saa7146_dev *dev);
+void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state);
+void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi);
+int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf);
+void saa7146_buffer_timeout(struct timer_list *t);
+void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q,
+						struct saa7146_buf *buf);
+
+int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
+int saa7146_vv_release(struct saa7146_dev* dev);
+
+/* from saa7146_hlp.c */
+int saa7146_enable_overlay(struct saa7146_fh *fh);
+void saa7146_disable_overlay(struct saa7146_fh *fh);
+
+void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next);
+void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ;
+void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync);
+void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data);
+
+/* from saa7146_video.c */
+extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops;
+extern const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops;
+extern const struct saa7146_use_ops saa7146_video_uops;
+int saa7146_start_preview(struct saa7146_fh *fh);
+int saa7146_stop_preview(struct saa7146_fh *fh);
+long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg);
+int saa7146_s_ctrl(struct v4l2_ctrl *ctrl);
+
+/* from saa7146_vbi.c */
+extern const struct saa7146_use_ops saa7146_vbi_uops;
+
+/* resource management functions */
+int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit);
+void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits);
+
+#define RESOURCE_DMA1_HPS	0x1
+#define RESOURCE_DMA2_CLP	0x2
+#define RESOURCE_DMA3_BRS	0x4
+
+/* saa7146 source inputs */
+#define SAA7146_HPS_SOURCE_PORT_A	0x00
+#define SAA7146_HPS_SOURCE_PORT_B	0x01
+#define SAA7146_HPS_SOURCE_YPB_CPA	0x02
+#define SAA7146_HPS_SOURCE_YPA_CPB	0x03
+
+/* sync inputs */
+#define SAA7146_HPS_SYNC_PORT_A		0x00
+#define SAA7146_HPS_SYNC_PORT_B		0x01
+
+/* some memory sizes */
+/* max. 16 clipping rectangles */
+#define SAA7146_CLIPPING_MEM	(16 * 4 * sizeof(u32))
+
+/* some defines for the various clipping-modes */
+#define SAA7146_CLIPPING_RECT		0x4
+#define SAA7146_CLIPPING_RECT_INVERTED	0x5
+#define SAA7146_CLIPPING_MASK		0x6
+#define SAA7146_CLIPPING_MASK_INVERTED	0x7
+
+/* output formats: each entry holds four information */
+#define RGB08_COMPOSED	0x0217 /* composed is used in the sense of "not-planar" */
+/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */
+#define RGB15_COMPOSED	0x0213
+#define RGB16_COMPOSED	0x0210
+#define RGB24_COMPOSED	0x0201
+#define RGB32_COMPOSED	0x0202
+
+#define Y8			0x0006
+#define YUV411_COMPOSED		0x0003
+#define YUV422_COMPOSED		0x0000
+/* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */
+#define YUV411_DECOMPOSED	0x100b
+#define YUV422_DECOMPOSED	0x1009
+#define YUV420_DECOMPOSED	0x100a
+
+#define IS_PLANAR(x) (x & 0xf000)
+
+/* misc defines */
+#define SAA7146_NO_SWAP		(0x0)
+#define SAA7146_TWO_BYTE_SWAP	(0x1)
+#define SAA7146_FOUR_BYTE_SWAP	(0x2)
+
+#endif
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/Kconfig b/drivers/staging/media/deprecated/saa7146/saa7146/Kconfig
new file mode 100644
index 000000000000..228e8d3f8d2b
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/saa7146/Kconfig
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_HEXIUM_GEMINI
+	tristate "Hexium Gemini frame grabber (DEPRECATED)"
+	depends on PCI && VIDEO_DEV && I2C
+	select VIDEO_SAA7146_VV
+	help
+	  This is a video4linux driver for the Hexium Gemini frame
+	  grabber card by Hexium. Please note that the Gemini Dual
+	  card is *not* fully supported.
+
+	  This driver is deprecated and is scheduled for removal by
+	  the beginning of 2023. See the TODO file for more information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hexium_gemini.
+
+config VIDEO_HEXIUM_ORION
+	tristate "Hexium HV-PCI6 and Orion frame grabber (DEPRECATED)"
+	depends on PCI && VIDEO_DEV && I2C
+	select VIDEO_SAA7146_VV
+	help
+	  This is a video4linux driver for the Hexium HV-PCI6 and
+	  Orion frame grabber cards by Hexium.
+
+	  This driver is deprecated and is scheduled for removal by
+	  the beginning of 2023. See the TODO file for more information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hexium_orion.
+
+config VIDEO_MXB
+	tristate "Siemens-Nixdorf 'Multimedia eXtension Board' (DEPRECATED)"
+	depends on PCI && VIDEO_DEV && I2C
+	select VIDEO_SAA7146_VV
+	select VIDEO_TUNER
+	select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_TDA9840 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_TEA6415C if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_TEA6420 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  This is a video4linux driver for the 'Multimedia eXtension Board'
+	  TV card by Siemens-Nixdorf.
+
+	  This driver is deprecated and is scheduled for removal by
+	  the beginning of 2023. See the TODO file for more information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mxb.
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/Makefile b/drivers/staging/media/deprecated/saa7146/saa7146/Makefile
new file mode 100644
index 000000000000..37c9336f83d5
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/saa7146/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_VIDEO_MXB) += mxb.o
+obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
+obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
+
+ccflags-y += -I$(srctree)/drivers/media/i2c
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/TODO b/drivers/staging/media/deprecated/saa7146/saa7146/TODO
new file mode 100644
index 000000000000..c9ae2ec79cea
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/saa7146/TODO
@@ -0,0 +1,7 @@
+The saa7146-based drivers are one of the few drivers still not using
+the vb2 framework, so these drivers are now deprecated with the intent of
+removing them altogether by the beginning of 2023.
+
+In order to keep these drivers they have to be converted to vb2.
+If someone is interested in doing this work, then contact the
+linux-media mailinglist (https://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c b/drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c
new file mode 100644
index 000000000000..124e82bd4507
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/saa7146/hexium_gemini.c
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    hexium_gemini.c - v4l2 driver for Hexium Gemini frame grabber cards
+
+    Visit http://www.mihu.de/linux/saa7146/ and follow the link
+    to "hexium" for further details about this card.
+
+    Copyright (C) 2003 Michael Hunold <michael@mihu.de>
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DEBUG_VARIABLE debug
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "../common/saa7146_vv.h"
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "debug verbosity");
+
+/* global variables */
+static int hexium_num;
+
+#define HEXIUM_GEMINI			4
+#define HEXIUM_GEMINI_DUAL		5
+
+#define HEXIUM_INPUTS	9
+static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = {
+	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+};
+
+#define HEXIUM_AUDIOS	0
+
+struct hexium_data
+{
+	s8 adr;
+	u8 byte;
+};
+
+#define HEXIUM_GEMINI_V_1_0		1
+#define HEXIUM_GEMINI_DUAL_V_1_0	2
+
+struct hexium
+{
+	int type;
+
+	struct video_device	video_dev;
+	struct i2c_adapter	i2c_adapter;
+
+	int		cur_input;	/* current input */
+	v4l2_std_id	cur_std;	/* current standard */
+};
+
+/* Samsung KS0127B decoder default registers */
+static u8 hexium_ks0127b[0x100]={
+/*00*/ 0x00,0x52,0x30,0x40,0x01,0x0C,0x2A,0x10,
+/*08*/ 0x00,0x00,0x00,0x60,0x00,0x00,0x0F,0x06,
+/*10*/ 0x00,0x00,0xE4,0xC0,0x00,0x00,0x00,0x00,
+/*18*/ 0x14,0x9B,0xFE,0xFF,0xFC,0xFF,0x03,0x22,
+/*20*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*28*/ 0x00,0x00,0x00,0x00,0x00,0x2C,0x9B,0x00,
+/*30*/ 0x00,0x00,0x10,0x80,0x80,0x10,0x80,0x80,
+/*38*/ 0x01,0x04,0x00,0x00,0x00,0x29,0xC0,0x00,
+/*40*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*48*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*50*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*58*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*60*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*68*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*70*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*78*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*80*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*88*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*90*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*98*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*A0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*A8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*B0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*B8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*C0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*C8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*D0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*D8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*E0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*E8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*F0*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+/*F8*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+};
+
+static struct hexium_data hexium_pal[] = {
+	{ 0x01, 0x52 }, { 0x12, 0x64 }, { 0x2D, 0x2C }, { 0x2E, 0x9B }, { -1 , 0xFF }
+};
+
+static struct hexium_data hexium_ntsc[] = {
+	{ 0x01, 0x53 }, { 0x12, 0x04 }, { 0x2D, 0x23 }, { 0x2E, 0x81 }, { -1 , 0xFF }
+};
+
+static struct hexium_data hexium_secam[] = {
+	{ 0x01, 0x52 }, { 0x12, 0x64 }, { 0x2D, 0x2C }, { 0x2E, 0x9B }, { -1 , 0xFF }
+};
+
+static struct hexium_data hexium_input_select[] = {
+	{ 0x02, 0x60 },
+	{ 0x02, 0x64 },
+	{ 0x02, 0x61 },
+	{ 0x02, 0x65 },
+	{ 0x02, 0x62 },
+	{ 0x02, 0x66 },
+	{ 0x02, 0x68 },
+	{ 0x02, 0x69 },
+	{ 0x02, 0x6A },
+};
+
+/* fixme: h_offset = 0 for Hexium Gemini *Dual*, which
+   are currently *not* supported*/
+static struct saa7146_standard hexium_standards[] = {
+	{
+		.name	= "PAL",	.id	= V4L2_STD_PAL,
+		.v_offset	= 28,	.v_field	= 288,
+		.h_offset	= 1,	.h_pixels	= 680,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}, {
+		.name	= "NTSC",	.id	= V4L2_STD_NTSC,
+		.v_offset	= 28,	.v_field	= 240,
+		.h_offset	= 1,	.h_pixels	= 640,
+		.v_max_out	= 480,	.h_max_out	= 640,
+	}, {
+		.name	= "SECAM",	.id	= V4L2_STD_SECAM,
+		.v_offset	= 28,	.v_field	= 288,
+		.h_offset	= 1,	.h_pixels	= 720,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}
+};
+
+/* bring hardware to a sane state. this has to be done, just in case someone
+   wants to capture from this device before it has been properly initialized.
+   the capture engine would badly fail, because no valid signal arrives on the
+   saa7146, thus leading to timeouts and stuff. */
+static int hexium_init_done(struct saa7146_dev *dev)
+{
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+	union i2c_smbus_data data;
+	int i = 0;
+
+	DEB_D("hexium_init_done called\n");
+
+	/* initialize the helper ics to useful values */
+	for (i = 0; i < sizeof(hexium_ks0127b); i++) {
+		data.byte = hexium_ks0127b[i];
+		if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) {
+			pr_err("hexium_init_done() failed for address 0x%02x\n",
+			       i);
+		}
+	}
+
+	return 0;
+}
+
+static int hexium_set_input(struct hexium *hexium, int input)
+{
+	union i2c_smbus_data data;
+
+	DEB_D("\n");
+
+	data.byte = hexium_input_select[input].byte;
+	if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, hexium_input_select[input].adr, I2C_SMBUS_BYTE_DATA, &data)) {
+		return -1;
+	}
+
+	return 0;
+}
+
+static int hexium_set_standard(struct hexium *hexium, struct hexium_data *vdec)
+{
+	union i2c_smbus_data data;
+	int i = 0;
+
+	DEB_D("\n");
+
+	while (vdec[i].adr != -1) {
+		data.byte = vdec[i].byte;
+		if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x6c, 0, I2C_SMBUS_WRITE, vdec[i].adr, I2C_SMBUS_BYTE_DATA, &data)) {
+			pr_err("hexium_init_done: hexium_set_standard() failed for address 0x%02x\n",
+			       i);
+			return -1;
+		}
+		i++;
+	}
+	return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
+{
+	DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
+
+	if (i->index >= HEXIUM_INPUTS)
+		return -EINVAL;
+
+	memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input));
+
+	DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index);
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *fh, unsigned int *input)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+
+	*input = hexium->cur_input;
+
+	DEB_D("VIDIOC_G_INPUT: %d\n", *input);
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+
+	DEB_EE("VIDIOC_S_INPUT %d\n", input);
+
+	if (input >= HEXIUM_INPUTS)
+		return -EINVAL;
+
+	hexium->cur_input = input;
+	hexium_set_input(hexium, input);
+	return 0;
+}
+
+static struct saa7146_ext_vv vv_data;
+
+/* this function only gets called when the probing was successful */
+static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+	struct hexium *hexium;
+	int ret;
+
+	DEB_EE("\n");
+
+	hexium = kzalloc(sizeof(*hexium), GFP_KERNEL);
+	if (!hexium)
+		return -ENOMEM;
+
+	dev->ext_priv = hexium;
+
+	/* enable i2c-port pins */
+	saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26));
+
+	strscpy(hexium->i2c_adapter.name, "hexium gemini",
+		sizeof(hexium->i2c_adapter.name));
+	saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
+	if (i2c_add_adapter(&hexium->i2c_adapter) < 0) {
+		DEB_S("cannot register i2c-device. skipping.\n");
+		kfree(hexium);
+		return -EFAULT;
+	}
+
+	/*  set HWControl GPIO number 2 */
+	saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
+
+	saa7146_write(dev, DD1_INIT, 0x07000700);
+	saa7146_write(dev, DD1_STREAM_B, 0x00000000);
+	saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+
+	/* the rest */
+	hexium->cur_input = 0;
+	hexium_init_done(dev);
+
+	hexium_set_standard(hexium, hexium_pal);
+	hexium->cur_std = V4L2_STD_PAL;
+
+	hexium_set_input(hexium, 0);
+	hexium->cur_input = 0;
+
+	ret = saa7146_vv_init(dev, &vv_data);
+	if (ret) {
+		i2c_del_adapter(&hexium->i2c_adapter);
+		kfree(hexium);
+		return ret;
+	}
+
+	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
+	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
+	vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
+	ret = saa7146_register_device(&hexium->video_dev, dev, "hexium gemini", VFL_TYPE_VIDEO);
+	if (ret < 0) {
+		pr_err("cannot register capture v4l2 device. skipping.\n");
+		saa7146_vv_release(dev);
+		i2c_del_adapter(&hexium->i2c_adapter);
+		kfree(hexium);
+		return ret;
+	}
+
+	pr_info("found 'hexium gemini' frame grabber-%d\n", hexium_num);
+	hexium_num++;
+
+	return 0;
+}
+
+static int hexium_detach(struct saa7146_dev *dev)
+{
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+
+	DEB_EE("dev:%p\n", dev);
+
+	saa7146_unregister_device(&hexium->video_dev, dev);
+	saa7146_vv_release(dev);
+
+	hexium_num--;
+
+	i2c_del_adapter(&hexium->i2c_adapter);
+	kfree(hexium);
+	return 0;
+}
+
+static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *std)
+{
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+
+	if (V4L2_STD_PAL == std->id) {
+		hexium_set_standard(hexium, hexium_pal);
+		hexium->cur_std = V4L2_STD_PAL;
+		return 0;
+	} else if (V4L2_STD_NTSC == std->id) {
+		hexium_set_standard(hexium, hexium_ntsc);
+		hexium->cur_std = V4L2_STD_NTSC;
+		return 0;
+	} else if (V4L2_STD_SECAM == std->id) {
+		hexium_set_standard(hexium, hexium_secam);
+		hexium->cur_std = V4L2_STD_SECAM;
+		return 0;
+	}
+
+	return -1;
+}
+
+static struct saa7146_extension hexium_extension;
+
+static struct saa7146_pci_extension_data hexium_gemini_4bnc = {
+	.ext_priv = "Hexium Gemini (4 BNC)",
+	.ext = &hexium_extension,
+};
+
+static struct saa7146_pci_extension_data hexium_gemini_dual_4bnc = {
+	.ext_priv = "Hexium Gemini Dual (4 BNC)",
+	.ext = &hexium_extension,
+};
+
+static const struct pci_device_id pci_tbl[] = {
+	{
+	 .vendor = PCI_VENDOR_ID_PHILIPS,
+	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
+	 .subvendor = 0x17c8,
+	 .subdevice = 0x2401,
+	 .driver_data = (unsigned long) &hexium_gemini_4bnc,
+	 },
+	{
+	 .vendor = PCI_VENDOR_ID_PHILIPS,
+	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
+	 .subvendor = 0x17c8,
+	 .subdevice = 0x2402,
+	 .driver_data = (unsigned long) &hexium_gemini_dual_4bnc,
+	 },
+	{
+	 .vendor = 0,
+	 }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_ext_vv vv_data = {
+	.inputs = HEXIUM_INPUTS,
+	.capabilities = 0,
+	.stds = &hexium_standards[0],
+	.num_stds = ARRAY_SIZE(hexium_standards),
+	.std_callback = &std_callback,
+};
+
+static struct saa7146_extension hexium_extension = {
+	.name = "hexium gemini",
+	.flags = SAA7146_USE_I2C_IRQ,
+
+	.pci_tbl = &pci_tbl[0],
+	.module = THIS_MODULE,
+
+	.attach = hexium_attach,
+	.detach = hexium_detach,
+
+	.irq_mask = 0,
+	.irq_func = NULL,
+};
+
+static int __init hexium_init_module(void)
+{
+	if (0 != saa7146_register_extension(&hexium_extension)) {
+		DEB_S("failed to register extension\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit hexium_cleanup_module(void)
+{
+	saa7146_unregister_extension(&hexium_extension);
+}
+
+module_init(hexium_init_module);
+module_exit(hexium_cleanup_module);
+
+MODULE_DESCRIPTION("video4linux-2 driver for Hexium Gemini frame grabber cards");
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c b/drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c
new file mode 100644
index 000000000000..ebd63998ac79
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/saa7146/hexium_orion.c
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    hexium_orion.c - v4l2 driver for the Hexium Orion frame grabber cards
+
+    Visit http://www.mihu.de/linux/saa7146/ and follow the link
+    to "hexium" for further details about this card.
+
+    Copyright (C) 2003 Michael Hunold <michael@mihu.de>
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DEBUG_VARIABLE debug
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "../common/saa7146_vv.h"
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "debug verbosity");
+
+/* global variables */
+static int hexium_num;
+
+#define HEXIUM_HV_PCI6_ORION		1
+#define HEXIUM_ORION_1SVHS_3BNC		2
+#define HEXIUM_ORION_4BNC		3
+
+#define HEXIUM_INPUTS	9
+static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = {
+	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	0, 0, V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+};
+
+#define HEXIUM_AUDIOS	0
+
+struct hexium_data
+{
+	s8 adr;
+	u8 byte;
+};
+
+struct hexium
+{
+	int type;
+	struct video_device	video_dev;
+	struct i2c_adapter	i2c_adapter;
+
+	int cur_input;	/* current input */
+};
+
+/* Philips SAA7110 decoder default registers */
+static u8 hexium_saa7110[53]={
+/*00*/ 0x4C,0x3C,0x0D,0xEF,0xBD,0xF0,0x00,0x00,
+/*08*/ 0xF8,0xF8,0x60,0x60,0x40,0x86,0x18,0x90,
+/*10*/ 0x00,0x2C,0x40,0x46,0x42,0x1A,0xFF,0xDA,
+/*18*/ 0xF0,0x8B,0x00,0x00,0x00,0x00,0x00,0x00,
+/*20*/ 0xD9,0x17,0x40,0x41,0x80,0x41,0x80,0x4F,
+/*28*/ 0xFE,0x01,0x0F,0x0F,0x03,0x01,0x81,0x03,
+/*30*/ 0x44,0x75,0x01,0x8C,0x03
+};
+
+static struct {
+	struct hexium_data data[8];
+} hexium_input_select[] = {
+{
+	{ /* cvbs 1 */
+		{ 0x06, 0x00 },
+		{ 0x20, 0xD9 },
+		{ 0x21, 0x17 }, // 0x16,
+		{ 0x22, 0x40 },
+		{ 0x2C, 0x03 },
+		{ 0x30, 0x44 },
+		{ 0x31, 0x75 }, // ??
+		{ 0x21, 0x16 }, // 0x03,
+	}
+}, {
+	{ /* cvbs 2 */
+		{ 0x06, 0x00 },
+		{ 0x20, 0x78 },
+		{ 0x21, 0x07 }, // 0x03,
+		{ 0x22, 0xD2 },
+		{ 0x2C, 0x83 },
+		{ 0x30, 0x60 },
+		{ 0x31, 0xB5 }, // ?
+		{ 0x21, 0x03 },
+	}
+}, {
+	{ /* cvbs 3 */
+		{ 0x06, 0x00 },
+		{ 0x20, 0xBA },
+		{ 0x21, 0x07 }, // 0x05,
+		{ 0x22, 0x91 },
+		{ 0x2C, 0x03 },
+		{ 0x30, 0x60 },
+		{ 0x31, 0xB5 }, // ??
+		{ 0x21, 0x05 }, // 0x03,
+	}
+}, {
+	{ /* cvbs 4 */
+		{ 0x06, 0x00 },
+		{ 0x20, 0xD8 },
+		{ 0x21, 0x17 }, // 0x16,
+		{ 0x22, 0x40 },
+		{ 0x2C, 0x03 },
+		{ 0x30, 0x44 },
+		{ 0x31, 0x75 }, // ??
+		{ 0x21, 0x16 }, // 0x03,
+	}
+}, {
+	{ /* cvbs 5 */
+		{ 0x06, 0x00 },
+		{ 0x20, 0xB8 },
+		{ 0x21, 0x07 }, // 0x05,
+		{ 0x22, 0x91 },
+		{ 0x2C, 0x03 },
+		{ 0x30, 0x60 },
+		{ 0x31, 0xB5 }, // ??
+		{ 0x21, 0x05 }, // 0x03,
+	}
+}, {
+	{ /* cvbs 6 */
+		{ 0x06, 0x00 },
+		{ 0x20, 0x7C },
+		{ 0x21, 0x07 }, // 0x03
+		{ 0x22, 0xD2 },
+		{ 0x2C, 0x83 },
+		{ 0x30, 0x60 },
+		{ 0x31, 0xB5 }, // ??
+		{ 0x21, 0x03 },
+	}
+}, {
+	{ /* y/c 1 */
+		{ 0x06, 0x80 },
+		{ 0x20, 0x59 },
+		{ 0x21, 0x17 },
+		{ 0x22, 0x42 },
+		{ 0x2C, 0xA3 },
+		{ 0x30, 0x44 },
+		{ 0x31, 0x75 },
+		{ 0x21, 0x12 },
+	}
+}, {
+	{ /* y/c 2 */
+		{ 0x06, 0x80 },
+		{ 0x20, 0x9A },
+		{ 0x21, 0x17 },
+		{ 0x22, 0xB1 },
+		{ 0x2C, 0x13 },
+		{ 0x30, 0x60 },
+		{ 0x31, 0xB5 },
+		{ 0x21, 0x14 },
+	}
+}, {
+	{ /* y/c 3 */
+		{ 0x06, 0x80 },
+		{ 0x20, 0x3C },
+		{ 0x21, 0x27 },
+		{ 0x22, 0xC1 },
+		{ 0x2C, 0x23 },
+		{ 0x30, 0x44 },
+		{ 0x31, 0x75 },
+		{ 0x21, 0x21 },
+	}
+}
+};
+
+static struct saa7146_standard hexium_standards[] = {
+	{
+		.name	= "PAL",	.id	= V4L2_STD_PAL,
+		.v_offset	= 16,	.v_field	= 288,
+		.h_offset	= 1,	.h_pixels	= 680,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}, {
+		.name	= "NTSC",	.id	= V4L2_STD_NTSC,
+		.v_offset	= 16,	.v_field	= 240,
+		.h_offset	= 1,	.h_pixels	= 640,
+		.v_max_out	= 480,	.h_max_out	= 640,
+	}, {
+		.name	= "SECAM",	.id	= V4L2_STD_SECAM,
+		.v_offset	= 16,	.v_field	= 288,
+		.h_offset	= 1,	.h_pixels	= 720,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}
+};
+
+/* this is only called for old HV-PCI6/Orion cards
+   without eeprom */
+static int hexium_probe(struct saa7146_dev *dev)
+{
+	struct hexium *hexium = NULL;
+	union i2c_smbus_data data;
+	int err = 0;
+
+	DEB_EE("\n");
+
+	/* there are no hexium orion cards with revision 0 saa7146s */
+	if (0 == dev->revision) {
+		return -EFAULT;
+	}
+
+	hexium = kzalloc(sizeof(*hexium), GFP_KERNEL);
+	if (!hexium)
+		return -ENOMEM;
+
+	/* enable i2c-port pins */
+	saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26));
+
+	saa7146_write(dev, DD1_INIT, 0x01000100);
+	saa7146_write(dev, DD1_STREAM_B, 0x00000000);
+	saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+
+	strscpy(hexium->i2c_adapter.name, "hexium orion",
+		sizeof(hexium->i2c_adapter.name));
+	saa7146_i2c_adapter_prepare(dev, &hexium->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
+	if (i2c_add_adapter(&hexium->i2c_adapter) < 0) {
+		DEB_S("cannot register i2c-device. skipping.\n");
+		kfree(hexium);
+		return -EFAULT;
+	}
+
+	/* set SAA7110 control GPIO 0 */
+	saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI);
+	/*  set HWControl GPIO number 2 */
+	saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
+
+	mdelay(10);
+
+	/* detect newer Hexium Orion cards by subsystem ids */
+	if (0x17c8 == dev->pci->subsystem_vendor && 0x0101 == dev->pci->subsystem_device) {
+		pr_info("device is a Hexium Orion w/ 1 SVHS + 3 BNC inputs\n");
+		/* we store the pointer in our private data field */
+		dev->ext_priv = hexium;
+		hexium->type = HEXIUM_ORION_1SVHS_3BNC;
+		return 0;
+	}
+
+	if (0x17c8 == dev->pci->subsystem_vendor && 0x2101 == dev->pci->subsystem_device) {
+		pr_info("device is a Hexium Orion w/ 4 BNC inputs\n");
+		/* we store the pointer in our private data field */
+		dev->ext_priv = hexium;
+		hexium->type = HEXIUM_ORION_4BNC;
+		return 0;
+	}
+
+	/* check if this is an old hexium Orion card by looking at
+	   a saa7110 at address 0x4e */
+	err = i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_READ,
+			     0x00, I2C_SMBUS_BYTE_DATA, &data);
+	if (err == 0) {
+		pr_info("device is a Hexium HV-PCI6/Orion (old)\n");
+		/* we store the pointer in our private data field */
+		dev->ext_priv = hexium;
+		hexium->type = HEXIUM_HV_PCI6_ORION;
+		return 0;
+	}
+
+	i2c_del_adapter(&hexium->i2c_adapter);
+	kfree(hexium);
+	return -EFAULT;
+}
+
+/* bring hardware to a sane state. this has to be done, just in case someone
+   wants to capture from this device before it has been properly initialized.
+   the capture engine would badly fail, because no valid signal arrives on the
+   saa7146, thus leading to timeouts and stuff. */
+static int hexium_init_done(struct saa7146_dev *dev)
+{
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+	union i2c_smbus_data data;
+	int i = 0;
+
+	DEB_D("hexium_init_done called\n");
+
+	/* initialize the helper ics to useful values */
+	for (i = 0; i < sizeof(hexium_saa7110); i++) {
+		data.byte = hexium_saa7110[i];
+		if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, i, I2C_SMBUS_BYTE_DATA, &data)) {
+			pr_err("failed for address 0x%02x\n", i);
+		}
+	}
+
+	return 0;
+}
+
+static int hexium_set_input(struct hexium *hexium, int input)
+{
+	union i2c_smbus_data data;
+	int i = 0;
+
+	DEB_D("\n");
+
+	for (i = 0; i < 8; i++) {
+		int adr = hexium_input_select[input].data[i].adr;
+		data.byte = hexium_input_select[input].data[i].byte;
+		if (0 != i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_WRITE, adr, I2C_SMBUS_BYTE_DATA, &data)) {
+			return -1;
+		}
+		pr_debug("%d: 0x%02x => 0x%02x\n", input, adr, data.byte);
+	}
+
+	return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
+{
+	DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
+
+	if (i->index >= HEXIUM_INPUTS)
+		return -EINVAL;
+
+	memcpy(i, &hexium_inputs[i->index], sizeof(struct v4l2_input));
+
+	DEB_D("v4l2_ioctl: VIDIOC_ENUMINPUT %d\n", i->index);
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *fh, unsigned int *input)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+
+	*input = hexium->cur_input;
+
+	DEB_D("VIDIOC_G_INPUT: %d\n", *input);
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+
+	if (input >= HEXIUM_INPUTS)
+		return -EINVAL;
+
+	hexium->cur_input = input;
+	hexium_set_input(hexium, input);
+
+	return 0;
+}
+
+static struct saa7146_ext_vv vv_data;
+
+/* this function only gets called when the probing was successful */
+static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+	int ret;
+
+	DEB_EE("\n");
+
+	ret = saa7146_vv_init(dev, &vv_data);
+	if (ret) {
+		pr_err("Error in saa7146_vv_init()\n");
+		return ret;
+	}
+
+	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
+	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
+	vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
+	if (0 != saa7146_register_device(&hexium->video_dev, dev, "hexium orion", VFL_TYPE_VIDEO)) {
+		pr_err("cannot register capture v4l2 device. skipping.\n");
+		return -1;
+	}
+
+	pr_err("found 'hexium orion' frame grabber-%d\n", hexium_num);
+	hexium_num++;
+
+	/* the rest */
+	hexium->cur_input = 0;
+	hexium_init_done(dev);
+
+	return 0;
+}
+
+static int hexium_detach(struct saa7146_dev *dev)
+{
+	struct hexium *hexium = (struct hexium *) dev->ext_priv;
+
+	DEB_EE("dev:%p\n", dev);
+
+	saa7146_unregister_device(&hexium->video_dev, dev);
+	saa7146_vv_release(dev);
+
+	hexium_num--;
+
+	i2c_del_adapter(&hexium->i2c_adapter);
+	kfree(hexium);
+	return 0;
+}
+
+static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *std)
+{
+	return 0;
+}
+
+static struct saa7146_extension extension;
+
+static struct saa7146_pci_extension_data hexium_hv_pci6 = {
+	.ext_priv = "Hexium HV-PCI6 / Orion",
+	.ext = &extension,
+};
+
+static struct saa7146_pci_extension_data hexium_orion_1svhs_3bnc = {
+	.ext_priv = "Hexium HV-PCI6 / Orion (1 SVHS/3 BNC)",
+	.ext = &extension,
+};
+
+static struct saa7146_pci_extension_data hexium_orion_4bnc = {
+	.ext_priv = "Hexium HV-PCI6 / Orion (4 BNC)",
+	.ext = &extension,
+};
+
+static const struct pci_device_id pci_tbl[] = {
+	{
+	 .vendor = PCI_VENDOR_ID_PHILIPS,
+	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
+	 .subvendor = 0x0000,
+	 .subdevice = 0x0000,
+	 .driver_data = (unsigned long) &hexium_hv_pci6,
+	 },
+	{
+	 .vendor = PCI_VENDOR_ID_PHILIPS,
+	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
+	 .subvendor = 0x17c8,
+	 .subdevice = 0x0101,
+	 .driver_data = (unsigned long) &hexium_orion_1svhs_3bnc,
+	 },
+	{
+	 .vendor = PCI_VENDOR_ID_PHILIPS,
+	 .device = PCI_DEVICE_ID_PHILIPS_SAA7146,
+	 .subvendor = 0x17c8,
+	 .subdevice = 0x2101,
+	 .driver_data = (unsigned long) &hexium_orion_4bnc,
+	 },
+	{
+	 .vendor = 0,
+	 }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_ext_vv vv_data = {
+	.inputs = HEXIUM_INPUTS,
+	.capabilities = 0,
+	.stds = &hexium_standards[0],
+	.num_stds = ARRAY_SIZE(hexium_standards),
+	.std_callback = &std_callback,
+};
+
+static struct saa7146_extension extension = {
+	.name = "hexium HV-PCI6 Orion",
+	.flags = 0,		// SAA7146_USE_I2C_IRQ,
+
+	.pci_tbl = &pci_tbl[0],
+	.module = THIS_MODULE,
+
+	.probe = hexium_probe,
+	.attach = hexium_attach,
+	.detach = hexium_detach,
+
+	.irq_mask = 0,
+	.irq_func = NULL,
+};
+
+static int __init hexium_init_module(void)
+{
+	if (0 != saa7146_register_extension(&extension)) {
+		DEB_S("failed to register extension\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit hexium_cleanup_module(void)
+{
+	saa7146_unregister_extension(&extension);
+}
+
+module_init(hexium_init_module);
+module_exit(hexium_cleanup_module);
+
+MODULE_DESCRIPTION("video4linux-2 driver for Hexium Orion frame grabber cards");
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/saa7146/mxb.c b/drivers/staging/media/deprecated/saa7146/saa7146/mxb.c
new file mode 100644
index 000000000000..3e568f952dae
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/saa7146/mxb.c
@@ -0,0 +1,873 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    mxb - v4l2 driver for the Multimedia eXtension Board
+
+    Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>
+
+    Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
+    for further details about this card.
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DEBUG_VARIABLE debug
+
+#include <media/tuner.h>
+#include <media/v4l2-common.h>
+#include <media/i2c/saa7115.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include "../common/saa7146_vv.h"
+#include "tea6415c.h"
+#include "tea6420.h"
+
+#define MXB_AUDIOS	6
+
+#define I2C_SAA7111A  0x24
+#define	I2C_TDA9840   0x42
+#define	I2C_TEA6415C  0x43
+#define	I2C_TEA6420_1 0x4c
+#define	I2C_TEA6420_2 0x4d
+#define	I2C_TUNER     0x60
+
+#define MXB_BOARD_CAN_DO_VBI(dev)   (dev->revision != 0)
+
+/* global variable */
+static int mxb_num;
+
+/* initial frequence the tuner will be tuned to.
+   in verden (lower saxony, germany) 4148 is a
+   channel called "phoenix" */
+static int freq = 4148;
+module_param(freq, int, 0644);
+MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup");
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
+
+#define MXB_INPUTS 4
+enum { TUNER, AUX1, AUX3, AUX3_YC };
+
+static struct v4l2_input mxb_inputs[MXB_INPUTS] = {
+	{ TUNER,   "Tuner",          V4L2_INPUT_TYPE_TUNER,  0x3f, 0,
+		V4L2_STD_PAL_BG | V4L2_STD_PAL_I, 0, V4L2_IN_CAP_STD },
+	{ AUX1,	   "AUX1",           V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
+		V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ AUX3,	   "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
+		V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+	{ AUX3_YC, "AUX3 S-Video",   V4L2_INPUT_TYPE_CAMERA, 0x3f, 0,
+		V4L2_STD_ALL, 0, V4L2_IN_CAP_STD },
+};
+
+/* this array holds the information, which port of the saa7146 each
+   input actually uses. the mxb uses port 0 for every input */
+static struct {
+	int hps_source;
+	int hps_sync;
+} input_port_selection[MXB_INPUTS] = {
+	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+	{ SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A },
+};
+
+/* this array holds the information of the audio source (mxb_audios),
+   which has to be switched corresponding to the video source (mxb_channels) */
+static int video_audio_connect[MXB_INPUTS] =
+	{ 0, 1, 3, 3 };
+
+struct mxb_routing {
+	u32 input;
+	u32 output;
+};
+
+/* these are the available audio sources, which can switched
+   to the line- and cd-output individually */
+static struct v4l2_audio mxb_audios[MXB_AUDIOS] = {
+	    {
+		.index	= 0,
+		.name	= "Tuner",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 1,
+		.name	= "AUX1",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 2,
+		.name	= "AUX2",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 3,
+		.name	= "AUX3",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 4,
+		.name	= "Radio (X9)",
+		.capability = V4L2_AUDCAP_STEREO,
+	} , {
+		.index	= 5,
+		.name	= "CD-ROM (X10)",
+		.capability = V4L2_AUDCAP_STEREO,
+	}
+};
+
+/* These are the necessary input-output-pins for bringing one audio source
+   (see above) to the CD-output. Note that gain is set to 0 in this table. */
+static struct mxb_routing TEA6420_cd[MXB_AUDIOS + 1][2] = {
+	{ { 1, 1 }, { 1, 1 } },	/* Tuner */
+	{ { 5, 1 }, { 6, 1 } },	/* AUX 1 */
+	{ { 4, 1 }, { 6, 1 } },	/* AUX 2 */
+	{ { 3, 1 }, { 6, 1 } },	/* AUX 3 */
+	{ { 1, 1 }, { 3, 1 } },	/* Radio */
+	{ { 1, 1 }, { 2, 1 } },	/* CD-Rom */
+	{ { 6, 1 }, { 6, 1 } }	/* Mute */
+};
+
+/* These are the necessary input-output-pins for bringing one audio source
+   (see above) to the line-output. Note that gain is set to 0 in this table. */
+static struct mxb_routing TEA6420_line[MXB_AUDIOS + 1][2] = {
+	{ { 2, 3 }, { 1, 2 } },
+	{ { 5, 3 }, { 6, 2 } },
+	{ { 4, 3 }, { 6, 2 } },
+	{ { 3, 3 }, { 6, 2 } },
+	{ { 2, 3 }, { 3, 2 } },
+	{ { 2, 3 }, { 2, 2 } },
+	{ { 6, 3 }, { 6, 2 } }	/* Mute */
+};
+
+struct mxb
+{
+	struct video_device	video_dev;
+	struct video_device	vbi_dev;
+
+	struct i2c_adapter	i2c_adapter;
+
+	struct v4l2_subdev	*saa7111a;
+	struct v4l2_subdev	*tda9840;
+	struct v4l2_subdev	*tea6415c;
+	struct v4l2_subdev	*tuner;
+	struct v4l2_subdev	*tea6420_1;
+	struct v4l2_subdev	*tea6420_2;
+
+	int	cur_mode;	/* current audio mode (mono, stereo, ...) */
+	int	cur_input;	/* current input */
+	int	cur_audinput;	/* current audio input */
+	int	cur_mute;	/* current mute status */
+	struct v4l2_frequency	cur_freq;	/* current frequency the tuner is tuned to */
+};
+
+#define saa7111a_call(mxb, o, f, args...) \
+	v4l2_subdev_call(mxb->saa7111a, o, f, ##args)
+#define tda9840_call(mxb, o, f, args...) \
+	v4l2_subdev_call(mxb->tda9840, o, f, ##args)
+#define tea6415c_call(mxb, o, f, args...) \
+	v4l2_subdev_call(mxb->tea6415c, o, f, ##args)
+#define tuner_call(mxb, o, f, args...) \
+	v4l2_subdev_call(mxb->tuner, o, f, ##args)
+#define call_all(dev, o, f, args...) \
+	v4l2_device_call_until_err(&dev->v4l2_dev, 0, o, f, ##args)
+
+static void mxb_update_audmode(struct mxb *mxb)
+{
+	struct v4l2_tuner t = {
+		.audmode = mxb->cur_mode,
+	};
+
+	tda9840_call(mxb, tuner, s_tuner, &t);
+}
+
+static inline void tea6420_route(struct mxb *mxb, int idx)
+{
+	v4l2_subdev_call(mxb->tea6420_1, audio, s_routing,
+		TEA6420_cd[idx][0].input, TEA6420_cd[idx][0].output, 0);
+	v4l2_subdev_call(mxb->tea6420_2, audio, s_routing,
+		TEA6420_cd[idx][1].input, TEA6420_cd[idx][1].output, 0);
+	v4l2_subdev_call(mxb->tea6420_1, audio, s_routing,
+		TEA6420_line[idx][0].input, TEA6420_line[idx][0].output, 0);
+	v4l2_subdev_call(mxb->tea6420_2, audio, s_routing,
+		TEA6420_line[idx][1].input, TEA6420_line[idx][1].output, 0);
+}
+
+static struct saa7146_extension extension;
+
+static int mxb_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct saa7146_dev *dev = container_of(ctrl->handler,
+				struct saa7146_dev, ctrl_handler);
+	struct mxb *mxb = dev->ext_priv;
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		mxb->cur_mute = ctrl->val;
+		/* switch the audio-source */
+		tea6420_route(mxb, ctrl->val ? 6 :
+				video_audio_connect[mxb->cur_input]);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct v4l2_ctrl_ops mxb_ctrl_ops = {
+	.s_ctrl = mxb_s_ctrl,
+};
+
+static int mxb_probe(struct saa7146_dev *dev)
+{
+	struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
+	struct mxb *mxb = NULL;
+
+	v4l2_ctrl_new_std(hdl, &mxb_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	if (hdl->error)
+		return hdl->error;
+	mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL);
+	if (mxb == NULL) {
+		DEB_D("not enough kernel memory\n");
+		return -ENOMEM;
+	}
+
+
+	snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num);
+
+	saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
+	if (i2c_add_adapter(&mxb->i2c_adapter) < 0) {
+		DEB_S("cannot register i2c-device. skipping.\n");
+		kfree(mxb);
+		return -EFAULT;
+	}
+
+	mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"saa7111", I2C_SAA7111A, NULL);
+	mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tea6420", I2C_TEA6420_1, NULL);
+	mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tea6420", I2C_TEA6420_2, NULL);
+	mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tea6415c", I2C_TEA6415C, NULL);
+	mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tda9840", I2C_TDA9840, NULL);
+	mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
+			"tuner", I2C_TUNER, NULL);
+
+	/* check if all devices are present */
+	if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
+	    !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) {
+		pr_err("did not find all i2c devices. aborting\n");
+		i2c_del_adapter(&mxb->i2c_adapter);
+		kfree(mxb);
+		return -ENODEV;
+	}
+
+	/* all devices are present, probe was successful */
+
+	/* we store the pointer in our private data field */
+	dev->ext_priv = mxb;
+
+	v4l2_ctrl_handler_setup(hdl);
+
+	return 0;
+}
+
+/* some init data for the saa7740, the so-called 'sound arena module'.
+   there are no specs available, so we simply use some init values */
+static struct {
+	int	length;
+	char	data[9];
+} mxb_saa7740_init[] = {
+	{ 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } },
+	{ 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } },
+	{ 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } },
+	{ 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } },
+	{ 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } },
+	{ 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } },
+	{ 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } },
+	{ 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } },
+	{ 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } },
+	{ 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } },
+	{ 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } },
+	{ 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } },
+	{ 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } },
+	{ 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } },
+	{ 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } },
+	{ 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } },
+	{ 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } },
+	{ 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } },
+	{ 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } },
+	{ 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } },
+	{ 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } },
+	{ 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } },
+	{ 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } },
+	{ 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } },
+	{ 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } },
+	{ 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } },
+	{ 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } },
+	{ 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } },
+	{ 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } },
+	{ 3, { 0x48, 0x00, 0x01 } },
+	{ 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
+	{ 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } },
+	{ 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
+	{ 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } },
+	{ 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
+	{ 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } },
+	{ 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
+	{ 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } },
+	{ 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
+	{ 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } },
+	{ 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
+	{ 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } },
+	{ 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
+	{ 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } },
+	{ 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
+	{ 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } },
+	{ 3, { 0x80, 0xb3, 0x0a } },
+	{-1, { 0 } }
+};
+
+/* bring hardware to a sane state. this has to be done, just in case someone
+   wants to capture from this device before it has been properly initialized.
+   the capture engine would badly fail, because no valid signal arrives on the
+   saa7146, thus leading to timeouts and stuff. */
+static int mxb_init_done(struct saa7146_dev* dev)
+{
+	struct mxb* mxb = (struct mxb*)dev->ext_priv;
+	struct i2c_msg msg;
+	struct tuner_setup tun_setup;
+	v4l2_std_id std = V4L2_STD_PAL_BG;
+
+	int i, err = 0;
+
+	/* mute audio on tea6420s */
+	tea6420_route(mxb, 6);
+
+	/* select video mode in saa7111a */
+	saa7111a_call(mxb, video, s_std, std);
+
+	/* select tuner-output on saa7111a */
+	saa7111a_call(mxb, video, s_routing, SAA7115_COMPOSITE0,
+		SAA7111_FMT_CCIR, 0);
+
+	/* select a tuner type */
+	tun_setup.mode_mask = T_ANALOG_TV;
+	tun_setup.addr = ADDR_UNSET;
+	tun_setup.type = TUNER_PHILIPS_PAL;
+	tuner_call(mxb, tuner, s_type_addr, &tun_setup);
+	/* tune in some frequency on tuner */
+	mxb->cur_freq.tuner = 0;
+	mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV;
+	mxb->cur_freq.frequency = freq;
+	tuner_call(mxb, tuner, s_frequency, &mxb->cur_freq);
+
+	/* set a default video standard */
+	/* These two gpio calls set the GPIO pins that control the tda9820 */
+	saa7146_write(dev, GPIO_CTRL, 0x00404050);
+	saa7111a_call(mxb, core, s_gpio, 1);
+	saa7111a_call(mxb, video, s_std, std);
+	tuner_call(mxb, video, s_std, std);
+
+	/* switch to tuner-channel on tea6415c */
+	tea6415c_call(mxb, video, s_routing, 3, 17, 0);
+
+	/* select tuner-output on multicable on tea6415c */
+	tea6415c_call(mxb, video, s_routing, 3, 13, 0);
+
+	/* the rest for mxb */
+	mxb->cur_input = 0;
+	mxb->cur_audinput = video_audio_connect[mxb->cur_input];
+	mxb->cur_mute = 1;
+
+	mxb->cur_mode = V4L2_TUNER_MODE_STEREO;
+	mxb_update_audmode(mxb);
+
+	/* check if the saa7740 (aka 'sound arena module') is present
+	   on the mxb. if so, we must initialize it. due to lack of
+	   information about the saa7740, the values were reverse
+	   engineered. */
+	msg.addr = 0x1b;
+	msg.flags = 0;
+	msg.len = mxb_saa7740_init[0].length;
+	msg.buf = &mxb_saa7740_init[0].data[0];
+
+	err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
+	if (err == 1) {
+		/* the sound arena module is a pos, that's probably the reason
+		   philips refuses to hand out a datasheet for the saa7740...
+		   it seems to screw up the i2c bus, so we disable fast irq
+		   based i2c transactions here and rely on the slow and safe
+		   polling method ... */
+		extension.flags &= ~SAA7146_USE_I2C_IRQ;
+		for (i = 1; ; i++) {
+			if (-1 == mxb_saa7740_init[i].length)
+				break;
+
+			msg.len = mxb_saa7740_init[i].length;
+			msg.buf = &mxb_saa7740_init[i].data[0];
+			err = i2c_transfer(&mxb->i2c_adapter, &msg, 1);
+			if (err != 1) {
+				DEB_D("failed to initialize 'sound arena module'\n");
+				goto err;
+			}
+		}
+		pr_info("'sound arena module' detected\n");
+	}
+err:
+	/* the rest for saa7146: you should definitely set some basic values
+	   for the input-port handling of the saa7146. */
+
+	/* ext->saa has been filled by the core driver */
+
+	/* some stuff is done via variables */
+	saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source,
+			input_port_selection[mxb->cur_input].hps_sync);
+
+	/* some stuff is done via direct write to the registers */
+
+	/* this is ugly, but because of the fact that this is completely
+	   hardware dependend, it should be done directly... */
+	saa7146_write(dev, DD1_STREAM_B,	0x00000000);
+	saa7146_write(dev, DD1_INIT,		0x02000200);
+	saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+
+	return 0;
+}
+
+/* interrupt-handler. this gets called when irq_mask is != 0.
+   it must clear the interrupt-bits in irq_mask it has handled */
+/*
+void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask)
+{
+	struct mxb* mxb = (struct mxb*)dev->ext_priv;
+}
+*/
+
+static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
+{
+	DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index);
+	if (i->index >= MXB_INPUTS)
+		return -EINVAL;
+	memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input));
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+	*i = mxb->cur_input;
+
+	DEB_EE("VIDIOC_G_INPUT %d\n", *i);
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+	int err = 0;
+	int i = 0;
+
+	DEB_EE("VIDIOC_S_INPUT %d\n", input);
+
+	if (input >= MXB_INPUTS)
+		return -EINVAL;
+
+	mxb->cur_input = input;
+
+	saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source,
+			input_port_selection[input].hps_sync);
+
+	/* prepare switching of tea6415c and saa7111a;
+	   have a look at the 'background'-file for further information  */
+	switch (input) {
+	case TUNER:
+		i = SAA7115_COMPOSITE0;
+
+		err = tea6415c_call(mxb, video, s_routing, 3, 17, 0);
+
+		/* connect tuner-output always to multicable */
+		if (!err)
+			err = tea6415c_call(mxb, video, s_routing, 3, 13, 0);
+		break;
+	case AUX3_YC:
+		/* nothing to be done here. aux3_yc is
+		   directly connected to the saa711a */
+		i = SAA7115_SVIDEO1;
+		break;
+	case AUX3:
+		/* nothing to be done here. aux3 is
+		   directly connected to the saa711a */
+		i = SAA7115_COMPOSITE1;
+		break;
+	case AUX1:
+		i = SAA7115_COMPOSITE0;
+		err = tea6415c_call(mxb, video, s_routing, 1, 17, 0);
+		break;
+	}
+
+	if (err)
+		return err;
+
+	/* switch video in saa7111a */
+	if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0))
+		pr_err("VIDIOC_S_INPUT: could not address saa7111a\n");
+
+	mxb->cur_audinput = video_audio_connect[input];
+	/* switch the audio-source only if necessary */
+	if (0 == mxb->cur_mute)
+		tea6420_route(mxb, mxb->cur_audinput);
+	if (mxb->cur_audinput == 0)
+		mxb_update_audmode(mxb);
+
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	if (t->index) {
+		DEB_D("VIDIOC_G_TUNER: channel %d does not have a tuner attached\n",
+		      t->index);
+		return -EINVAL;
+	}
+
+	DEB_EE("VIDIOC_G_TUNER: %d\n", t->index);
+
+	memset(t, 0, sizeof(*t));
+	strscpy(t->name, "TV Tuner", sizeof(t->name));
+	t->type = V4L2_TUNER_ANALOG_TV;
+	t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO |
+			V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
+	t->audmode = mxb->cur_mode;
+	return call_all(dev, tuner, g_tuner, t);
+}
+
+static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *t)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	if (t->index) {
+		DEB_D("VIDIOC_S_TUNER: channel %d does not have a tuner attached\n",
+		      t->index);
+		return -EINVAL;
+	}
+
+	mxb->cur_mode = t->audmode;
+	return call_all(dev, tuner, s_tuner, t);
+}
+
+static int vidioc_querystd(struct file *file, void *fh, v4l2_std_id *norm)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+
+	return call_all(dev, video, querystd, norm);
+}
+
+static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	if (f->tuner)
+		return -EINVAL;
+	*f = mxb->cur_freq;
+
+	DEB_EE("VIDIOC_G_FREQ: freq:0x%08x\n", mxb->cur_freq.frequency);
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	if (f->tuner)
+		return -EINVAL;
+
+	if (V4L2_TUNER_ANALOG_TV != f->type)
+		return -EINVAL;
+
+	DEB_EE("VIDIOC_S_FREQUENCY: freq:0x%08x\n", mxb->cur_freq.frequency);
+
+	/* tune in desired frequency */
+	tuner_call(mxb, tuner, s_frequency, f);
+	/* let the tuner subdev clamp the frequency to the tuner range */
+	mxb->cur_freq = *f;
+	tuner_call(mxb, tuner, g_frequency, &mxb->cur_freq);
+	if (mxb->cur_audinput == 0)
+		mxb_update_audmode(mxb);
+
+	if (mxb->cur_input)
+		return 0;
+
+	/* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */
+	spin_lock(&dev->slock);
+	vv->vbi_fieldcount = 0;
+	spin_unlock(&dev->slock);
+
+	return 0;
+}
+
+static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a)
+{
+	if (a->index >= MXB_AUDIOS)
+		return -EINVAL;
+	*a = mxb_audios[a->index];
+	return 0;
+}
+
+static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	DEB_EE("VIDIOC_G_AUDIO\n");
+	*a = mxb_audios[mxb->cur_audinput];
+	return 0;
+}
+
+static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	DEB_D("VIDIOC_S_AUDIO %d\n", a->index);
+	if (a->index >= 32 ||
+	    !(mxb_inputs[mxb->cur_input].audioset & (1 << a->index)))
+		return -EINVAL;
+
+	if (mxb->cur_audinput != a->index) {
+		mxb->cur_audinput = a->index;
+		tea6420_route(mxb, a->index);
+		if (mxb->cur_audinput == 0)
+			mxb_update_audmode(mxb);
+	}
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+
+	if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
+		return -EINVAL;
+	reg->val = saa7146_read(dev, reg->reg);
+	reg->size = 4;
+	return 0;
+}
+
+static int vidioc_s_register(struct file *file, void *fh, const struct v4l2_dbg_register *reg)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+
+	if (reg->reg > pci_resource_len(dev->pci, 0) - 4)
+		return -EINVAL;
+	saa7146_write(dev, reg->reg, reg->val);
+	return 0;
+}
+#endif
+
+static struct saa7146_ext_vv vv_data;
+
+/* this function only gets called when the probing was successful */
+static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+	struct mxb *mxb;
+	int ret;
+
+	DEB_EE("dev:%p\n", dev);
+
+	ret = saa7146_vv_init(dev, &vv_data);
+	if (ret) {
+		ERR("Error in saa7146_vv_init()");
+		return ret;
+	}
+
+	if (mxb_probe(dev)) {
+		saa7146_vv_release(dev);
+		return -1;
+	}
+	mxb = (struct mxb *)dev->ext_priv;
+
+	vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
+	vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
+	vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
+	vv_data.vid_ops.vidioc_querystd = vidioc_querystd;
+	vv_data.vid_ops.vidioc_g_tuner = vidioc_g_tuner;
+	vv_data.vid_ops.vidioc_s_tuner = vidioc_s_tuner;
+	vv_data.vid_ops.vidioc_g_frequency = vidioc_g_frequency;
+	vv_data.vid_ops.vidioc_s_frequency = vidioc_s_frequency;
+	vv_data.vid_ops.vidioc_enumaudio = vidioc_enumaudio;
+	vv_data.vid_ops.vidioc_g_audio = vidioc_g_audio;
+	vv_data.vid_ops.vidioc_s_audio = vidioc_s_audio;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	vv_data.vid_ops.vidioc_g_register = vidioc_g_register;
+	vv_data.vid_ops.vidioc_s_register = vidioc_s_register;
+#endif
+	if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_VIDEO)) {
+		ERR("cannot register capture v4l2 device. skipping.\n");
+		saa7146_vv_release(dev);
+		return -1;
+	}
+
+	/* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
+	if (MXB_BOARD_CAN_DO_VBI(dev)) {
+		if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) {
+			ERR("cannot register vbi v4l2 device. skipping.\n");
+		}
+	}
+
+	pr_info("found Multimedia eXtension Board #%d\n", mxb_num);
+
+	mxb_num++;
+	mxb_init_done(dev);
+	return 0;
+}
+
+static int mxb_detach(struct saa7146_dev *dev)
+{
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	DEB_EE("dev:%p\n", dev);
+
+	/* mute audio on tea6420s */
+	tea6420_route(mxb, 6);
+
+	saa7146_unregister_device(&mxb->video_dev,dev);
+	if (MXB_BOARD_CAN_DO_VBI(dev))
+		saa7146_unregister_device(&mxb->vbi_dev, dev);
+	saa7146_vv_release(dev);
+
+	mxb_num--;
+
+	i2c_del_adapter(&mxb->i2c_adapter);
+	kfree(mxb);
+
+	return 0;
+}
+
+static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
+{
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
+
+	if (V4L2_STD_PAL_I == standard->id) {
+		v4l2_std_id std = V4L2_STD_PAL_I;
+
+		DEB_D("VIDIOC_S_STD: setting mxb for PAL_I\n");
+		/* These two gpio calls set the GPIO pins that control the tda9820 */
+		saa7146_write(dev, GPIO_CTRL, 0x00404050);
+		saa7111a_call(mxb, core, s_gpio, 0);
+		saa7111a_call(mxb, video, s_std, std);
+		if (mxb->cur_input == 0)
+			tuner_call(mxb, video, s_std, std);
+	} else {
+		v4l2_std_id std = V4L2_STD_PAL_BG;
+
+		if (mxb->cur_input)
+			std = standard->id;
+		DEB_D("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM\n");
+		/* These two gpio calls set the GPIO pins that control the tda9820 */
+		saa7146_write(dev, GPIO_CTRL, 0x00404050);
+		saa7111a_call(mxb, core, s_gpio, 1);
+		saa7111a_call(mxb, video, s_std, std);
+		if (mxb->cur_input == 0)
+			tuner_call(mxb, video, s_std, std);
+	}
+	return 0;
+}
+
+static struct saa7146_standard standard[] = {
+	{
+		.name	= "PAL-BG",	.id	= V4L2_STD_PAL_BG,
+		.v_offset	= 0x17,	.v_field	= 288,
+		.h_offset	= 0x14,	.h_pixels	= 680,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}, {
+		.name	= "PAL-I",	.id	= V4L2_STD_PAL_I,
+		.v_offset	= 0x17,	.v_field	= 288,
+		.h_offset	= 0x14,	.h_pixels	= 680,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}, {
+		.name	= "NTSC",	.id	= V4L2_STD_NTSC,
+		.v_offset	= 0x16,	.v_field	= 240,
+		.h_offset	= 0x06,	.h_pixels	= 708,
+		.v_max_out	= 480,	.h_max_out	= 640,
+	}, {
+		.name	= "SECAM",	.id	= V4L2_STD_SECAM,
+		.v_offset	= 0x14,	.v_field	= 288,
+		.h_offset	= 0x14,	.h_pixels	= 720,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}
+};
+
+static struct saa7146_pci_extension_data mxb = {
+	.ext_priv = "Multimedia eXtension Board",
+	.ext = &extension,
+};
+
+static const struct pci_device_id pci_tbl[] = {
+	{
+		.vendor    = PCI_VENDOR_ID_PHILIPS,
+		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,
+		.subvendor = 0x0000,
+		.subdevice = 0x0000,
+		.driver_data = (unsigned long)&mxb,
+	}, {
+		.vendor	= 0,
+	}
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_ext_vv vv_data = {
+	.inputs		= MXB_INPUTS,
+	.capabilities	= V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_AUDIO,
+	.stds		= &standard[0],
+	.num_stds	= ARRAY_SIZE(standard),
+	.std_callback	= &std_callback,
+};
+
+static struct saa7146_extension extension = {
+	.name		= "Multimedia eXtension Board",
+	.flags		= SAA7146_USE_I2C_IRQ,
+
+	.pci_tbl	= &pci_tbl[0],
+	.module		= THIS_MODULE,
+
+	.attach		= mxb_attach,
+	.detach		= mxb_detach,
+
+	.irq_mask	= 0,
+	.irq_func	= NULL,
+};
+
+static int __init mxb_init_module(void)
+{
+	if (saa7146_register_extension(&extension)) {
+		DEB_S("failed to register extension\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit mxb_cleanup_module(void)
+{
+	saa7146_unregister_extension(&extension);
+}
+
+module_init(mxb_init_module);
+module_exit(mxb_cleanup_module);
+
+MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'");
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/Kconfig b/drivers/staging/media/deprecated/saa7146/ttpci/Kconfig
new file mode 100644
index 000000000000..8c85ed58e938
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/ttpci/Kconfig
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config DVB_BUDGET_CORE
+	tristate "SAA7146 DVB cards (aka Budget, Nova-PCI) (DEPRECATED)"
+	depends on DVB_CORE && PCI && I2C
+	select VIDEO_SAA7146
+	select TTPCI_EEPROM
+	help
+	  Support for simple SAA7146 based DVB cards
+	  (so called Budget- or Nova-PCI cards) without onboard
+	  MPEG2 decoder.
+
+config DVB_BUDGET
+	tristate "Budget cards (DEPRECATED)"
+	depends on DVB_BUDGET_CORE && I2C
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_VES1X93 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_VES1820 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_L64781 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA8083 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Support for simple SAA7146 based DVB cards (so called Budget-
+	  or Nova-PCI cards) without onboard MPEG2 decoder, and without
+	  analog inputs or an onboard Common Interface connector.
+
+	  This driver is deprecated and is scheduled for removal by
+	  the beginning of 2023. See the TODO file for more information.
+
+	  Say Y if you own such a card and want to use it.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called budget.
+
+config DVB_BUDGET_CI
+	tristate "Budget cards with onboard CI connector (DEPRECATED)"
+	depends on DVB_BUDGET_CORE && I2C
+	select DVB_STV0297 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
+	depends on RC_CORE
+	help
+	  Support for simple SAA7146 based DVB cards
+	  (so called Budget- or Nova-PCI cards) without onboard
+	  MPEG2 decoder, but with onboard Common Interface connector.
+
+	  Note: The Common Interface is not yet supported by this driver
+	  due to lack of information from the vendor.
+
+	  This driver is deprecated and is scheduled for removal by
+	  the beginning of 2023. See the TODO file for more information.
+
+	  Say Y if you own such a card and want to use it.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called budget-ci.
+
+config DVB_BUDGET_AV
+	tristate "Budget cards with analog video inputs (DEPRECATED)"
+	depends on DVB_BUDGET_CORE && I2C
+	select VIDEO_SAA7146_VV
+	depends on VIDEO_DEV	# dependencies of VIDEO_SAA7146_VV
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10021 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA8261 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TUA6100 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Support for simple SAA7146 based DVB cards
+	  (so called Budget- or Nova-PCI cards) without onboard
+	  MPEG2 decoder, but with one or more analog video inputs.
+
+	  This driver is deprecated and is scheduled for removal by
+	  the beginning of 2023. See the TODO file for more information.
+
+	  Say Y if you own such a card and want to use it.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called budget-av.
diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/Makefile b/drivers/staging/media/deprecated/saa7146/ttpci/Makefile
new file mode 100644
index 000000000000..b0708f6e40cc
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/ttpci/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the kernel SAA7146 FULL TS DVB device driver
+#
+
+obj-$(CONFIG_DVB_BUDGET_CORE) += budget-core.o
+obj-$(CONFIG_DVB_BUDGET) += budget.o
+obj-$(CONFIG_DVB_BUDGET_AV) += budget-av.o
+obj-$(CONFIG_DVB_BUDGET_CI) += budget-ci.o
+
+ccflags-y += -I $(srctree)/drivers/media/dvb-frontends/
+ccflags-y += -I $(srctree)/drivers/media/tuners
+ccflags-y += -I $(srctree)/drivers/media/common
diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/TODO b/drivers/staging/media/deprecated/saa7146/ttpci/TODO
new file mode 100644
index 000000000000..c9ae2ec79cea
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/ttpci/TODO
@@ -0,0 +1,7 @@
+The saa7146-based drivers are one of the few drivers still not using
+the vb2 framework, so these drivers are now deprecated with the intent of
+removing them altogether by the beginning of 2023.
+
+In order to keep these drivers they have to be converted to vb2.
+If someone is interested in doing this work, then contact the
+linux-media mailinglist (https://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget-av.c b/drivers/staging/media/deprecated/saa7146/ttpci/budget-av.c
new file mode 100644
index 000000000000..0c61a2dec221
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/ttpci/budget-av.c
@@ -0,0 +1,1622 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * budget-av.c: driver for the SAA7146 based Budget DVB cards
+ *              with analog video in
+ *
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
+ *                               Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph  Metzler
+ *                       & Marcus Metzler for convergence integrated media GmbH
+ *
+ * the project's page is at https://linuxtv.org
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "budget.h"
+#include "stv0299.h"
+#include "stb0899_drv.h"
+#include "stb0899_reg.h"
+#include "stb0899_cfg.h"
+#include "tda8261.h"
+#include "tda8261_cfg.h"
+#include "tda1002x.h"
+#include "tda1004x.h"
+#include "tua6100.h"
+#include "dvb-pll.h"
+#include "../common/saa7146_vv.h"
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+
+#include <media/dvb_ca_en50221.h>
+
+#define DEBICICAM		0x02420000
+
+#define SLOTSTATUS_NONE         1
+#define SLOTSTATUS_PRESENT      2
+#define SLOTSTATUS_RESET        4
+#define SLOTSTATUS_READY        8
+#define SLOTSTATUS_OCCUPIED     (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct budget_av {
+	struct budget budget;
+	struct video_device vd;
+	int cur_input;
+	int has_saa7113;
+	struct tasklet_struct ciintf_irq_tasklet;
+	int slot_status;
+	struct dvb_ca_en50221 ca;
+	u8 reinitialise_demod:1;
+};
+
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot);
+
+
+/* GPIO Connections:
+ * 0 - Vcc/Reset (Reset is controlled by capacitor). Resets the frontend *AS WELL*!
+ * 1 - CI memory select 0=>IO memory, 1=>Attribute Memory
+ * 2 - CI Card Enable (Active Low)
+ * 3 - CI Card Detect
+ */
+
+/****************************************************************************
+ * INITIALIZATION
+ ****************************************************************************/
+
+static u8 i2c_readreg(struct i2c_adapter *i2c, u8 id, u8 reg)
+{
+	u8 mm1[] = { 0x00 };
+	u8 mm2[] = { 0x00 };
+	struct i2c_msg msgs[2];
+
+	msgs[0].flags = 0;
+	msgs[1].flags = I2C_M_RD;
+	msgs[0].addr = msgs[1].addr = id / 2;
+	mm1[0] = reg;
+	msgs[0].len = 1;
+	msgs[1].len = 1;
+	msgs[0].buf = mm1;
+	msgs[1].buf = mm2;
+
+	i2c_transfer(i2c, msgs, 2);
+
+	return mm2[0];
+}
+
+static int i2c_readregs(struct i2c_adapter *i2c, u8 id, u8 reg, u8 * buf, u8 len)
+{
+	u8 mm1[] = { reg };
+	struct i2c_msg msgs[2] = {
+		{.addr = id / 2,.flags = 0,.buf = mm1,.len = 1},
+		{.addr = id / 2,.flags = I2C_M_RD,.buf = buf,.len = len}
+	};
+
+	if (i2c_transfer(i2c, msgs, 2) != 2)
+		return -EIO;
+
+	return 0;
+}
+
+static int i2c_writereg(struct i2c_adapter *i2c, u8 id, u8 reg, u8 val)
+{
+	u8 msg[2] = { reg, val };
+	struct i2c_msg msgs;
+
+	msgs.flags = 0;
+	msgs.addr = id / 2;
+	msgs.len = 2;
+	msgs.buf = msg;
+	return i2c_transfer(i2c, &msgs, 1);
+}
+
+static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	int result;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+	udelay(1);
+
+	result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 1);
+	if (result == -ETIMEDOUT) {
+		ciintf_slot_shutdown(ca, slot);
+		pr_info("cam ejected 1\n");
+	}
+	return result;
+}
+
+static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	int result;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+	udelay(1);
+
+	result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 1);
+	if (result == -ETIMEDOUT) {
+		ciintf_slot_shutdown(ca, slot);
+		pr_info("cam ejected 2\n");
+	}
+	return result;
+}
+
+static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	int result;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+	udelay(1);
+
+	result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);
+	if (result == -ETIMEDOUT) {
+		ciintf_slot_shutdown(ca, slot);
+		pr_info("cam ejected 3\n");
+		return -ETIMEDOUT;
+	}
+	return result;
+}
+
+static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	int result;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+	udelay(1);
+
+	result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);
+	if (result == -ETIMEDOUT) {
+		ciintf_slot_shutdown(ca, slot);
+		pr_info("cam ejected 5\n");
+	}
+	return result;
+}
+
+static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	struct saa7146_dev *saa = budget_av->budget.dev;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	dprintk(1, "ciintf_slot_reset\n");
+	budget_av->slot_status = SLOTSTATUS_RESET;
+
+	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */
+
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */
+	msleep(2);
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */
+	msleep(20); /* 20 ms Vcc settling time */
+
+	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */
+	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+	msleep(20);
+
+	/* reinitialise the frontend if necessary */
+	if (budget_av->reinitialise_demod)
+		dvb_frontend_reinitialise(budget_av->budget.dvb_frontend);
+
+	return 0;
+}
+
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	struct saa7146_dev *saa = budget_av->budget.dev;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	dprintk(1, "ciintf_slot_shutdown\n");
+
+	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+	budget_av->slot_status = SLOTSTATUS_NONE;
+
+	return 0;
+}
+
+static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	struct saa7146_dev *saa = budget_av->budget.dev;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	dprintk(1, "ciintf_slot_ts_enable: %d\n", budget_av->slot_status);
+
+	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
+
+	return 0;
+}
+
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+	struct budget_av *budget_av = (struct budget_av *) ca->data;
+	struct saa7146_dev *saa = budget_av->budget.dev;
+	int result;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	/* test the card detect line - needs to be done carefully
+	 * since it never goes high for some CAMs on this interface (e.g. topuptv) */
+	if (budget_av->slot_status == SLOTSTATUS_NONE) {
+		saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+		udelay(1);
+		if (saa7146_read(saa, PSR) & MASK_06) {
+			if (budget_av->slot_status == SLOTSTATUS_NONE) {
+				budget_av->slot_status = SLOTSTATUS_PRESENT;
+				pr_info("cam inserted A\n");
+			}
+		}
+		saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+	}
+
+	/* We also try and read from IO memory to work round the above detection bug. If
+	 * there is no CAM, we will get a timeout. Only done if there is no cam
+	 * present, since this test actually breaks some cams :(
+	 *
+	 * if the CI interface is not open, we also do the above test since we
+	 * don't care if the cam has problems - we'll be resetting it on open() anyway */
+	if ((budget_av->slot_status == SLOTSTATUS_NONE) || (!open)) {
+		saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+		result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1);
+		if ((result >= 0) && (budget_av->slot_status == SLOTSTATUS_NONE)) {
+			budget_av->slot_status = SLOTSTATUS_PRESENT;
+			pr_info("cam inserted B\n");
+		} else if (result < 0) {
+			if (budget_av->slot_status != SLOTSTATUS_NONE) {
+				ciintf_slot_shutdown(ca, slot);
+				pr_info("cam ejected 5\n");
+				return 0;
+			}
+		}
+	}
+
+	/* read from attribute memory in reset/ready state to know when the CAM is ready */
+	if (budget_av->slot_status == SLOTSTATUS_RESET) {
+		result = ciintf_read_attribute_mem(ca, slot, 0);
+		if (result == 0x1d) {
+			budget_av->slot_status = SLOTSTATUS_READY;
+		}
+	}
+
+	/* work out correct return code */
+	if (budget_av->slot_status != SLOTSTATUS_NONE) {
+		if (budget_av->slot_status & SLOTSTATUS_READY) {
+			return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+		}
+		return DVB_CA_EN50221_POLL_CAM_PRESENT;
+	}
+	return 0;
+}
+
+static int ciintf_init(struct budget_av *budget_av)
+{
+	struct saa7146_dev *saa = budget_av->budget.dev;
+	int result;
+
+	memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221));
+
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
+	saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO);
+	saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
+
+	/* Enable DEBI pins */
+	saa7146_write(saa, MC1, MASK_27 | MASK_11);
+
+	/* register CI interface */
+	budget_av->ca.owner = THIS_MODULE;
+	budget_av->ca.read_attribute_mem = ciintf_read_attribute_mem;
+	budget_av->ca.write_attribute_mem = ciintf_write_attribute_mem;
+	budget_av->ca.read_cam_control = ciintf_read_cam_control;
+	budget_av->ca.write_cam_control = ciintf_write_cam_control;
+	budget_av->ca.slot_reset = ciintf_slot_reset;
+	budget_av->ca.slot_shutdown = ciintf_slot_shutdown;
+	budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable;
+	budget_av->ca.poll_slot_status = ciintf_poll_slot_status;
+	budget_av->ca.data = budget_av;
+	budget_av->budget.ci_present = 1;
+	budget_av->slot_status = SLOTSTATUS_NONE;
+
+	if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter,
+					  &budget_av->ca, 0, 1)) != 0) {
+		pr_err("ci initialisation failed\n");
+		goto error;
+	}
+
+	pr_info("ci interface initialised\n");
+	return 0;
+
+error:
+	saa7146_write(saa, MC1, MASK_27);
+	return result;
+}
+
+static void ciintf_deinit(struct budget_av *budget_av)
+{
+	struct saa7146_dev *saa = budget_av->budget.dev;
+
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+	saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
+	saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
+	saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+
+	/* release the CA device */
+	dvb_ca_en50221_release(&budget_av->ca);
+
+	/* disable DEBI pins */
+	saa7146_write(saa, MC1, MASK_27);
+}
+
+
+static const u8 saa7113_tab[] = {
+	0x01, 0x08,
+	0x02, 0xc0,
+	0x03, 0x33,
+	0x04, 0x00,
+	0x05, 0x00,
+	0x06, 0xeb,
+	0x07, 0xe0,
+	0x08, 0x28,
+	0x09, 0x00,
+	0x0a, 0x80,
+	0x0b, 0x47,
+	0x0c, 0x40,
+	0x0d, 0x00,
+	0x0e, 0x01,
+	0x0f, 0x44,
+
+	0x10, 0x08,
+	0x11, 0x0c,
+	0x12, 0x7b,
+	0x13, 0x00,
+	0x15, 0x00, 0x16, 0x00, 0x17, 0x00,
+
+	0x57, 0xff,
+	0x40, 0x82, 0x58, 0x00, 0x59, 0x54, 0x5a, 0x07,
+	0x5b, 0x83, 0x5e, 0x00,
+	0xff
+};
+
+static int saa7113_init(struct budget_av *budget_av)
+{
+	struct budget *budget = &budget_av->budget;
+	struct saa7146_dev *saa = budget->dev;
+	const u8 *data = saa7113_tab;
+
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
+	msleep(200);
+
+	if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) {
+		dprintk(1, "saa7113 not found on KNC card\n");
+		return -ENODEV;
+	}
+
+	dprintk(1, "saa7113 detected and initializing\n");
+
+	while (*data != 0xff) {
+		i2c_writereg(&budget->i2c_adap, 0x4a, *data, *(data + 1));
+		data += 2;
+	}
+
+	dprintk(1, "saa7113  status=%02x\n", i2c_readreg(&budget->i2c_adap, 0x4a, 0x1f));
+
+	return 0;
+}
+
+static int saa7113_setinput(struct budget_av *budget_av, int input)
+{
+	struct budget *budget = &budget_av->budget;
+
+	if (1 != budget_av->has_saa7113)
+		return -ENODEV;
+
+	if (input == 1) {
+		i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc7);
+		i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x80);
+	} else if (input == 0) {
+		i2c_writereg(&budget->i2c_adap, 0x4a, 0x02, 0xc0);
+		i2c_writereg(&budget->i2c_adap, 0x4a, 0x09, 0x00);
+	} else
+		return -EINVAL;
+
+	budget_av->cur_input = input;
+	return 0;
+}
+
+
+static int philips_su1278_ty_ci_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+	u8 m1;
+
+	aclk = 0xb5;
+	if (srate < 2000000)
+		bclk = 0x86;
+	else if (srate < 5000000)
+		bclk = 0x89;
+	else if (srate < 15000000)
+		bclk = 0x8f;
+	else if (srate < 45000000)
+		bclk = 0x95;
+
+	m1 = 0x14;
+	if (srate < 4000000)
+		m1 = 0x10;
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+	stv0299_writereg(fe, 0x0f, 0x80 | m1);
+
+	return 0;
+}
+
+static int philips_su1278_ty_ci_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u32 div;
+	u8 buf[4];
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+	struct i2c_msg msg = {.addr = 0x61,.flags = 0,.buf = buf,.len = sizeof(buf) };
+
+	if ((c->frequency < 950000) || (c->frequency > 2150000))
+		return -EINVAL;
+
+	div = (c->frequency + (125 - 1)) / 125;	/* round correctly */
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+	buf[3] = 0x20;
+
+	if (c->symbol_rate < 4000000)
+		buf[3] |= 1;
+
+	if (c->frequency < 1250000)
+		buf[3] |= 0;
+	else if (c->frequency < 1550000)
+		buf[3] |= 0x40;
+	else if (c->frequency < 2050000)
+		buf[3] |= 0x80;
+	else if (c->frequency < 2150000)
+		buf[3] |= 0xC0;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static u8 typhoon_cinergy1200s_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x7d,		/* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x35,		/* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x40,		/* DAC not used, set to high impendance mode */
+	0x07, 0x00,		/* DAC LSB */
+	0x08, 0x40,		/* DiSEqC off */
+	0x09, 0x00,		/* FIFO */
+	0x0c, 0x51,		/* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+	0x0d, 0x82,		/* DC offset compensation = ON, beta_agc1 = 2 */
+	0x0e, 0x23,		/* alpha_tmg = 2, beta_tmg = 3 */
+	0x10, 0x3f,		// AGC2  0x3d
+	0x11, 0x84,
+	0x12, 0xb9,
+	0x15, 0xc9,		// lock detector threshold
+	0x16, 0x00,
+	0x17, 0x00,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1a, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,		// out imp: normal  out type: parallel FEC mode:0
+	0x29, 0x1e,		// 1/2 threshold
+	0x2a, 0x14,		// 2/3 threshold
+	0x2b, 0x0f,		// 3/4 threshold
+	0x2c, 0x09,		// 5/6 threshold
+	0x2d, 0x05,		// 7/8 threshold
+	0x2e, 0x01,
+	0x31, 0x1f,		// test all FECs
+	0x32, 0x19,		// viterbi and synchro search
+	0x33, 0xfc,		// rs control
+	0x34, 0x93,		// error control
+	0x0f, 0x92,
+	0xff, 0xff
+};
+
+static const struct stv0299_config typhoon_config = {
+	.demod_address = 0x68,
+	.inittab = typhoon_cinergy1200s_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP0,
+	.min_delay_ms = 100,
+	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+};
+
+
+static const struct stv0299_config cinergy_1200s_config = {
+	.demod_address = 0x68,
+	.inittab = typhoon_cinergy1200s_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_0,
+	.volt13_op0_op1 = STV0299_VOLT13_OP0,
+	.min_delay_ms = 100,
+	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+};
+
+static const struct stv0299_config cinergy_1200s_1894_0010_config = {
+	.demod_address = 0x68,
+	.inittab = typhoon_cinergy1200s_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP0,
+	.min_delay_ms = 100,
+	.set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate,
+};
+
+static int philips_cu1216_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+	u8 buf[6];
+	struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
+	int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+	u32 div = (c->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0xce;
+	buf[3] = (c->frequency < 150000000 ? 0x01 :
+		  c->frequency < 445000000 ? 0x02 : 0x04);
+	buf[4] = 0xde;
+	buf[5] = 0x20;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+
+	/* wait for the pll lock */
+	msg.flags = I2C_M_RD;
+	msg.len = 1;
+	for (i = 0; i < 20; i++) {
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 1);
+		if (i2c_transfer(&budget->i2c_adap, &msg, 1) == 1 && (buf[0] & 0x40))
+			break;
+		msleep(10);
+	}
+
+	/* switch the charge pump to the lower current */
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = &buf[2];
+	buf[2] &= ~0x40;
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+
+	return 0;
+}
+
+static struct tda1002x_config philips_cu1216_config = {
+	.demod_address = 0x0c,
+	.invert = 1,
+};
+
+static struct tda1002x_config philips_cu1216_config_altaddress = {
+	.demod_address = 0x0d,
+	.invert = 0,
+};
+
+static struct tda10023_config philips_cu1216_tda10023_config = {
+	.demod_address = 0x0c,
+	.invert = 1,
+};
+
+static int philips_tu1216_tuner_init(struct dvb_frontend *fe)
+{
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+	static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
+	struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
+
+	// setup PLL configuration
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+		return -EIO;
+	msleep(1);
+
+	return 0;
+}
+
+static int philips_tu1216_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+	u8 tuner_buf[4];
+	struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len =
+			sizeof(tuner_buf) };
+	int tuner_frequency = 0;
+	u8 band, cp, filter;
+
+	// determine charge pump
+	tuner_frequency = c->frequency + 36166000;
+	if (tuner_frequency < 87000000)
+		return -EINVAL;
+	else if (tuner_frequency < 130000000)
+		cp = 3;
+	else if (tuner_frequency < 160000000)
+		cp = 5;
+	else if (tuner_frequency < 200000000)
+		cp = 6;
+	else if (tuner_frequency < 290000000)
+		cp = 3;
+	else if (tuner_frequency < 420000000)
+		cp = 5;
+	else if (tuner_frequency < 480000000)
+		cp = 6;
+	else if (tuner_frequency < 620000000)
+		cp = 3;
+	else if (tuner_frequency < 830000000)
+		cp = 5;
+	else if (tuner_frequency < 895000000)
+		cp = 7;
+	else
+		return -EINVAL;
+
+	// determine band
+	if (c->frequency < 49000000)
+		return -EINVAL;
+	else if (c->frequency < 161000000)
+		band = 1;
+	else if (c->frequency < 444000000)
+		band = 2;
+	else if (c->frequency < 861000000)
+		band = 4;
+	else
+		return -EINVAL;
+
+	// setup PLL filter
+	switch (c->bandwidth_hz) {
+	case 6000000:
+		filter = 0;
+		break;
+
+	case 7000000:
+		filter = 0;
+		break;
+
+	case 8000000:
+		filter = 1;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	// calculate divisor
+	// ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
+	tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000;
+
+	// setup tuner buffer
+	tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
+	tuner_buf[1] = tuner_frequency & 0xff;
+	tuner_buf[2] = 0xca;
+	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget->i2c_adap, &tuner_msg, 1) != 1)
+		return -EIO;
+
+	msleep(1);
+	return 0;
+}
+
+static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
+					   const struct firmware **fw, char *name)
+{
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+
+	return request_firmware(fw, name, &budget->dev->pci->dev);
+}
+
+static struct tda1004x_config philips_tu1216_config = {
+
+	.demod_address = 0x8,
+	.invert = 1,
+	.invert_oclk = 1,
+	.xtal_freq = TDA10046_XTAL_4M,
+	.agc_config = TDA10046_AGC_DEFAULT,
+	.if_freq = TDA10046_FREQ_3617,
+	.request_firmware = philips_tu1216_request_firmware,
+};
+
+static u8 philips_sd1878_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x7d,
+	0x05, 0x35,
+	0x06, 0x40,
+	0x07, 0x00,
+	0x08, 0x43,
+	0x09, 0x02,
+	0x0C, 0x51,
+	0x0D, 0x82,
+	0x0E, 0x23,
+	0x10, 0x3f,
+	0x11, 0x84,
+	0x12, 0xb9,
+	0x15, 0xc9,
+	0x16, 0x19,
+	0x17, 0x8c,
+	0x18, 0x59,
+	0x19, 0xf8,
+	0x1a, 0xfe,
+	0x1c, 0x7f,
+	0x1d, 0x00,
+	0x1e, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,
+	0x29, 0x28,
+	0x2a, 0x14,
+	0x2b, 0x0f,
+	0x2c, 0x09,
+	0x2d, 0x09,
+	0x31, 0x1f,
+	0x32, 0x19,
+	0x33, 0xfc,
+	0x34, 0x93,
+	0xff, 0xff
+};
+
+static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe,
+		u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+	u8 m1;
+
+	aclk = 0xb5;
+	if (srate < 2000000)
+		bclk = 0x86;
+	else if (srate < 5000000)
+		bclk = 0x89;
+	else if (srate < 15000000)
+		bclk = 0x8f;
+	else if (srate < 45000000)
+		bclk = 0x95;
+
+	m1 = 0x14;
+	if (srate < 4000000)
+		m1 = 0x10;
+
+	stv0299_writereg(fe, 0x0e, 0x23);
+	stv0299_writereg(fe, 0x0f, 0x94);
+	stv0299_writereg(fe, 0x10, 0x39);
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x15, 0xc9);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+	stv0299_writereg(fe, 0x0f, 0x80 | m1);
+
+	return 0;
+}
+
+static const struct stv0299_config philips_sd1878_config = {
+	.demod_address = 0x68,
+     .inittab = philips_sd1878_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP0,
+	.min_delay_ms = 100,
+	.set_symbol_rate = philips_sd1878_ci_set_symbol_rate,
+};
+
+/* KNC1 DVB-S (STB0899) Inittab	*/
+static const struct stb0899_s1_reg knc1_stb0899_s1_init_1[] = {
+
+	{ STB0899_DEV_ID		, 0x81 },
+	{ STB0899_DISCNTRL1		, 0x32 },
+	{ STB0899_DISCNTRL2		, 0x80 },
+	{ STB0899_DISRX_ST0		, 0x04 },
+	{ STB0899_DISRX_ST1		, 0x00 },
+	{ STB0899_DISPARITY		, 0x00 },
+	{ STB0899_DISSTATUS		, 0x20 },
+	{ STB0899_DISF22		, 0x8c },
+	{ STB0899_DISF22RX		, 0x9a },
+	{ STB0899_SYSREG		, 0x0b },
+	{ STB0899_ACRPRESC		, 0x11 },
+	{ STB0899_ACRDIV1		, 0x0a },
+	{ STB0899_ACRDIV2		, 0x05 },
+	{ STB0899_DACR1			, 0x00 },
+	{ STB0899_DACR2			, 0x00 },
+	{ STB0899_OUTCFG		, 0x00 },
+	{ STB0899_MODECFG		, 0x00 },
+	{ STB0899_IRQSTATUS_3		, 0x30 },
+	{ STB0899_IRQSTATUS_2		, 0x00 },
+	{ STB0899_IRQSTATUS_1		, 0x00 },
+	{ STB0899_IRQSTATUS_0		, 0x00 },
+	{ STB0899_IRQMSK_3		, 0xf3 },
+	{ STB0899_IRQMSK_2		, 0xfc },
+	{ STB0899_IRQMSK_1		, 0xff },
+	{ STB0899_IRQMSK_0		, 0xff },
+	{ STB0899_IRQCFG		, 0x00 },
+	{ STB0899_I2CCFG		, 0x88 },
+	{ STB0899_I2CRPT		, 0x58 }, /* Repeater=8, Stop=disabled */
+	{ STB0899_IOPVALUE5		, 0x00 },
+	{ STB0899_IOPVALUE4		, 0x20 },
+	{ STB0899_IOPVALUE3		, 0xc9 },
+	{ STB0899_IOPVALUE2		, 0x90 },
+	{ STB0899_IOPVALUE1		, 0x40 },
+	{ STB0899_IOPVALUE0		, 0x00 },
+	{ STB0899_GPIO00CFG		, 0x82 },
+	{ STB0899_GPIO01CFG		, 0x82 },
+	{ STB0899_GPIO02CFG		, 0x82 },
+	{ STB0899_GPIO03CFG		, 0x82 },
+	{ STB0899_GPIO04CFG		, 0x82 },
+	{ STB0899_GPIO05CFG		, 0x82 },
+	{ STB0899_GPIO06CFG		, 0x82 },
+	{ STB0899_GPIO07CFG		, 0x82 },
+	{ STB0899_GPIO08CFG		, 0x82 },
+	{ STB0899_GPIO09CFG		, 0x82 },
+	{ STB0899_GPIO10CFG		, 0x82 },
+	{ STB0899_GPIO11CFG		, 0x82 },
+	{ STB0899_GPIO12CFG		, 0x82 },
+	{ STB0899_GPIO13CFG		, 0x82 },
+	{ STB0899_GPIO14CFG		, 0x82 },
+	{ STB0899_GPIO15CFG		, 0x82 },
+	{ STB0899_GPIO16CFG		, 0x82 },
+	{ STB0899_GPIO17CFG		, 0x82 },
+	{ STB0899_GPIO18CFG		, 0x82 },
+	{ STB0899_GPIO19CFG		, 0x82 },
+	{ STB0899_GPIO20CFG		, 0x82 },
+	{ STB0899_SDATCFG		, 0xb8 },
+	{ STB0899_SCLTCFG		, 0xba },
+	{ STB0899_AGCRFCFG		, 0x08 }, /* 0x1c */
+	{ STB0899_GPIO22		, 0x82 }, /* AGCBB2CFG */
+	{ STB0899_GPIO21		, 0x91 }, /* AGCBB1CFG */
+	{ STB0899_DIRCLKCFG		, 0x82 },
+	{ STB0899_CLKOUT27CFG		, 0x7e },
+	{ STB0899_STDBYCFG		, 0x82 },
+	{ STB0899_CS0CFG		, 0x82 },
+	{ STB0899_CS1CFG		, 0x82 },
+	{ STB0899_DISEQCOCFG		, 0x20 },
+	{ STB0899_GPIO32CFG		, 0x82 },
+	{ STB0899_GPIO33CFG		, 0x82 },
+	{ STB0899_GPIO34CFG		, 0x82 },
+	{ STB0899_GPIO35CFG		, 0x82 },
+	{ STB0899_GPIO36CFG		, 0x82 },
+	{ STB0899_GPIO37CFG		, 0x82 },
+	{ STB0899_GPIO38CFG		, 0x82 },
+	{ STB0899_GPIO39CFG		, 0x82 },
+	{ STB0899_NCOARSE		, 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+	{ STB0899_SYNTCTRL		, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+	{ STB0899_FILTCTRL		, 0x00 },
+	{ STB0899_SYSCTRL		, 0x00 },
+	{ STB0899_STOPCLK1		, 0x20 },
+	{ STB0899_STOPCLK2		, 0x00 },
+	{ STB0899_INTBUFSTATUS		, 0x00 },
+	{ STB0899_INTBUFCTRL		, 0x0a },
+	{ 0xffff			, 0xff },
+};
+
+static const struct stb0899_s1_reg knc1_stb0899_s1_init_3[] = {
+	{ STB0899_DEMOD			, 0x00 },
+	{ STB0899_RCOMPC		, 0xc9 },
+	{ STB0899_AGC1CN		, 0x41 },
+	{ STB0899_AGC1REF		, 0x08 },
+	{ STB0899_RTC			, 0x7a },
+	{ STB0899_TMGCFG		, 0x4e },
+	{ STB0899_AGC2REF		, 0x33 },
+	{ STB0899_TLSR			, 0x84 },
+	{ STB0899_CFD			, 0xee },
+	{ STB0899_ACLC			, 0x87 },
+	{ STB0899_BCLC			, 0x94 },
+	{ STB0899_EQON			, 0x41 },
+	{ STB0899_LDT			, 0xdd },
+	{ STB0899_LDT2			, 0xc9 },
+	{ STB0899_EQUALREF		, 0xb4 },
+	{ STB0899_TMGRAMP		, 0x10 },
+	{ STB0899_TMGTHD		, 0x30 },
+	{ STB0899_IDCCOMP		, 0xfb },
+	{ STB0899_QDCCOMP		, 0x03 },
+	{ STB0899_POWERI		, 0x3b },
+	{ STB0899_POWERQ		, 0x3d },
+	{ STB0899_RCOMP			, 0x81 },
+	{ STB0899_AGCIQIN		, 0x80 },
+	{ STB0899_AGC2I1		, 0x04 },
+	{ STB0899_AGC2I2		, 0xf5 },
+	{ STB0899_TLIR			, 0x25 },
+	{ STB0899_RTF			, 0x80 },
+	{ STB0899_DSTATUS		, 0x00 },
+	{ STB0899_LDI			, 0xca },
+	{ STB0899_CFRM			, 0xf1 },
+	{ STB0899_CFRL			, 0xf3 },
+	{ STB0899_NIRM			, 0x2a },
+	{ STB0899_NIRL			, 0x05 },
+	{ STB0899_ISYMB			, 0x17 },
+	{ STB0899_QSYMB			, 0xfa },
+	{ STB0899_SFRH			, 0x2f },
+	{ STB0899_SFRM			, 0x68 },
+	{ STB0899_SFRL			, 0x40 },
+	{ STB0899_SFRUPH		, 0x2f },
+	{ STB0899_SFRUPM		, 0x68 },
+	{ STB0899_SFRUPL		, 0x40 },
+	{ STB0899_EQUAI1		, 0xfd },
+	{ STB0899_EQUAQ1		, 0x04 },
+	{ STB0899_EQUAI2		, 0x0f },
+	{ STB0899_EQUAQ2		, 0xff },
+	{ STB0899_EQUAI3		, 0xdf },
+	{ STB0899_EQUAQ3		, 0xfa },
+	{ STB0899_EQUAI4		, 0x37 },
+	{ STB0899_EQUAQ4		, 0x0d },
+	{ STB0899_EQUAI5		, 0xbd },
+	{ STB0899_EQUAQ5		, 0xf7 },
+	{ STB0899_DSTATUS2		, 0x00 },
+	{ STB0899_VSTATUS		, 0x00 },
+	{ STB0899_VERROR		, 0xff },
+	{ STB0899_IQSWAP		, 0x2a },
+	{ STB0899_ECNT1M		, 0x00 },
+	{ STB0899_ECNT1L		, 0x00 },
+	{ STB0899_ECNT2M		, 0x00 },
+	{ STB0899_ECNT2L		, 0x00 },
+	{ STB0899_ECNT3M		, 0x00 },
+	{ STB0899_ECNT3L		, 0x00 },
+	{ STB0899_FECAUTO1		, 0x06 },
+	{ STB0899_FECM			, 0x01 },
+	{ STB0899_VTH12			, 0xf0 },
+	{ STB0899_VTH23			, 0xa0 },
+	{ STB0899_VTH34			, 0x78 },
+	{ STB0899_VTH56			, 0x4e },
+	{ STB0899_VTH67			, 0x48 },
+	{ STB0899_VTH78			, 0x38 },
+	{ STB0899_PRVIT			, 0xff },
+	{ STB0899_VITSYNC		, 0x19 },
+	{ STB0899_RSULC			, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+	{ STB0899_TSULC			, 0x42 },
+	{ STB0899_RSLLC			, 0x40 },
+	{ STB0899_TSLPL			, 0x12 },
+	{ STB0899_TSCFGH		, 0x0c },
+	{ STB0899_TSCFGM		, 0x00 },
+	{ STB0899_TSCFGL		, 0x0c },
+	{ STB0899_TSOUT			, 0x4d }, /* 0x0d for CAM */
+	{ STB0899_RSSYNCDEL		, 0x00 },
+	{ STB0899_TSINHDELH		, 0x02 },
+	{ STB0899_TSINHDELM		, 0x00 },
+	{ STB0899_TSINHDELL		, 0x00 },
+	{ STB0899_TSLLSTKM		, 0x00 },
+	{ STB0899_TSLLSTKL		, 0x00 },
+	{ STB0899_TSULSTKM		, 0x00 },
+	{ STB0899_TSULSTKL		, 0xab },
+	{ STB0899_PCKLENUL		, 0x00 },
+	{ STB0899_PCKLENLL		, 0xcc },
+	{ STB0899_RSPCKLEN		, 0xcc },
+	{ STB0899_TSSTATUS		, 0x80 },
+	{ STB0899_ERRCTRL1		, 0xb6 },
+	{ STB0899_ERRCTRL2		, 0x96 },
+	{ STB0899_ERRCTRL3		, 0x89 },
+	{ STB0899_DMONMSK1		, 0x27 },
+	{ STB0899_DMONMSK0		, 0x03 },
+	{ STB0899_DEMAPVIT		, 0x5c },
+	{ STB0899_PLPARM		, 0x1f },
+	{ STB0899_PDELCTRL		, 0x48 },
+	{ STB0899_PDELCTRL2		, 0x00 },
+	{ STB0899_BBHCTRL1		, 0x00 },
+	{ STB0899_BBHCTRL2		, 0x00 },
+	{ STB0899_HYSTTHRESH		, 0x77 },
+	{ STB0899_MATCSTM		, 0x00 },
+	{ STB0899_MATCSTL		, 0x00 },
+	{ STB0899_UPLCSTM		, 0x00 },
+	{ STB0899_UPLCSTL		, 0x00 },
+	{ STB0899_DFLCSTM		, 0x00 },
+	{ STB0899_DFLCSTL		, 0x00 },
+	{ STB0899_SYNCCST		, 0x00 },
+	{ STB0899_SYNCDCSTM		, 0x00 },
+	{ STB0899_SYNCDCSTL		, 0x00 },
+	{ STB0899_ISI_ENTRY		, 0x00 },
+	{ STB0899_ISI_BIT_EN		, 0x00 },
+	{ STB0899_MATSTRM		, 0x00 },
+	{ STB0899_MATSTRL		, 0x00 },
+	{ STB0899_UPLSTRM		, 0x00 },
+	{ STB0899_UPLSTRL		, 0x00 },
+	{ STB0899_DFLSTRM		, 0x00 },
+	{ STB0899_DFLSTRL		, 0x00 },
+	{ STB0899_SYNCSTR		, 0x00 },
+	{ STB0899_SYNCDSTRM		, 0x00 },
+	{ STB0899_SYNCDSTRL		, 0x00 },
+	{ STB0899_CFGPDELSTATUS1	, 0x10 },
+	{ STB0899_CFGPDELSTATUS2	, 0x00 },
+	{ STB0899_BBFERRORM		, 0x00 },
+	{ STB0899_BBFERRORL		, 0x00 },
+	{ STB0899_UPKTERRORM		, 0x00 },
+	{ STB0899_UPKTERRORL		, 0x00 },
+	{ 0xffff			, 0xff },
+};
+
+/* STB0899 demodulator config for the KNC1 and clones */
+static struct stb0899_config knc1_dvbs2_config = {
+	.init_dev		= knc1_stb0899_s1_init_1,
+	.init_s2_demod		= stb0899_s2_init_2,
+	.init_s1_demod		= knc1_stb0899_s1_init_3,
+	.init_s2_fec		= stb0899_s2_init_4,
+	.init_tst		= stb0899_s1_init_5,
+
+	.postproc		= NULL,
+
+	.demod_address		= 0x68,
+//	.ts_output_mode		= STB0899_OUT_PARALLEL,	/* types = SERIAL/PARALLEL	*/
+	.block_sync_mode	= STB0899_SYNC_FORCED,	/* DSS, SYNC_FORCED/UNSYNCED	*/
+//	.ts_pfbit_toggle	= STB0899_MPEG_NORMAL,	/* DirecTV, MPEG toggling seq	*/
+
+	.xtal_freq		= 27000000,
+	.inversion		= IQ_SWAP_OFF,
+
+	.lo_clk			= 76500000,
+	.hi_clk			= 90000000,
+
+	.esno_ave		= STB0899_DVBS2_ESNO_AVE,
+	.esno_quant		= STB0899_DVBS2_ESNO_QUANT,
+	.avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE,
+	.avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE,
+	.miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD,
+	.uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+	.uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+	.uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF,
+	.sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+	.btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS,
+	.btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+	.crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS,
+	.ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER,
+
+	.tuner_get_frequency	= tda8261_get_frequency,
+	.tuner_set_frequency	= tda8261_set_frequency,
+	.tuner_set_bandwidth	= NULL,
+	.tuner_get_bandwidth	= tda8261_get_bandwidth,
+	.tuner_set_rfsiggain	= NULL
+};
+
+/*
+ * SD1878/SHA tuner config
+ * 1F, Single I/P, Horizontal mount, High Sensitivity
+ */
+static const struct tda8261_config sd1878c_config = {
+//	.name		= "SD1878/SHA",
+	.addr		= 0x60,
+	.step_size	= TDA8261_STEP_1000 /* kHz */
+};
+
+static u8 read_pwm(struct budget_av *budget_av)
+{
+	u8 b = 0xff;
+	u8 pwm;
+	struct i2c_msg msg[] = { {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
+	{.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
+	};
+
+	if ((i2c_transfer(&budget_av->budget.i2c_adap, msg, 2) != 2)
+	    || (pwm == 0xff))
+		pwm = 0x48;
+
+	return pwm;
+}
+
+#define SUBID_DVBS_KNC1			0x0010
+#define SUBID_DVBS_KNC1_PLUS		0x0011
+#define SUBID_DVBS_TYPHOON		0x4f56
+#define SUBID_DVBS_CINERGY1200		0x1154
+#define SUBID_DVBS_CYNERGY1200N		0x1155
+#define SUBID_DVBS_TV_STAR		0x0014
+#define SUBID_DVBS_TV_STAR_PLUS_X4	0x0015
+#define SUBID_DVBS_TV_STAR_CI		0x0016
+#define SUBID_DVBS2_KNC1		0x0018
+#define SUBID_DVBS2_KNC1_OEM		0x0019
+#define SUBID_DVBS_EASYWATCH_1		0x001a
+#define SUBID_DVBS_EASYWATCH_2		0x001b
+#define SUBID_DVBS2_EASYWATCH		0x001d
+#define SUBID_DVBS_EASYWATCH		0x001e
+
+#define SUBID_DVBC_EASYWATCH		0x002a
+#define SUBID_DVBC_EASYWATCH_MK3	0x002c
+#define SUBID_DVBC_KNC1			0x0020
+#define SUBID_DVBC_KNC1_PLUS		0x0021
+#define SUBID_DVBC_KNC1_MK3		0x0022
+#define SUBID_DVBC_KNC1_TDA10024	0x0028
+#define SUBID_DVBC_KNC1_PLUS_MK3	0x0023
+#define SUBID_DVBC_CINERGY1200		0x1156
+#define SUBID_DVBC_CINERGY1200_MK3	0x1176
+
+#define SUBID_DVBT_EASYWATCH		0x003a
+#define SUBID_DVBT_KNC1_PLUS		0x0031
+#define SUBID_DVBT_KNC1			0x0030
+#define SUBID_DVBT_CINERGY1200		0x1157
+
+static void frontend_init(struct budget_av *budget_av)
+{
+	struct saa7146_dev * saa = budget_av->budget.dev;
+	struct dvb_frontend * fe = NULL;
+
+	/* Enable / PowerON Frontend */
+	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
+
+	/* Wait for PowerON */
+	msleep(100);
+
+	/* additional setup necessary for the PLUS cards */
+	switch (saa->pci->subsystem_device) {
+		case SUBID_DVBS_KNC1_PLUS:
+		case SUBID_DVBC_KNC1_PLUS:
+		case SUBID_DVBT_KNC1_PLUS:
+		case SUBID_DVBC_EASYWATCH:
+		case SUBID_DVBC_KNC1_PLUS_MK3:
+		case SUBID_DVBS2_KNC1:
+		case SUBID_DVBS2_KNC1_OEM:
+		case SUBID_DVBS2_EASYWATCH:
+			saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
+			break;
+	}
+
+	switch (saa->pci->subsystem_device) {
+
+	case SUBID_DVBS_KNC1:
+		/*
+		 * maybe that setting is needed for other dvb-s cards as well,
+		 * but so far it has been only confirmed for this type
+		 */
+		budget_av->reinitialise_demod = 1;
+		fallthrough;
+	case SUBID_DVBS_KNC1_PLUS:
+	case SUBID_DVBS_EASYWATCH_1:
+		if (saa->pci->subsystem_vendor == 0x1894) {
+			fe = dvb_attach(stv0299_attach, &cinergy_1200s_1894_0010_config,
+					     &budget_av->budget.i2c_adap);
+			if (fe) {
+				dvb_attach(tua6100_attach, fe, 0x60, &budget_av->budget.i2c_adap);
+			}
+		} else {
+			fe = dvb_attach(stv0299_attach, &typhoon_config,
+					     &budget_av->budget.i2c_adap);
+			if (fe) {
+				fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+			}
+		}
+		break;
+
+	case SUBID_DVBS_TV_STAR:
+	case SUBID_DVBS_TV_STAR_PLUS_X4:
+	case SUBID_DVBS_TV_STAR_CI:
+	case SUBID_DVBS_CYNERGY1200N:
+	case SUBID_DVBS_EASYWATCH:
+	case SUBID_DVBS_EASYWATCH_2:
+		fe = dvb_attach(stv0299_attach, &philips_sd1878_config,
+				&budget_av->budget.i2c_adap);
+		if (fe) {
+			dvb_attach(dvb_pll_attach, fe, 0x60,
+				   &budget_av->budget.i2c_adap,
+				   DVB_PLL_PHILIPS_SD1878_TDA8261);
+		}
+		break;
+
+	case SUBID_DVBS_TYPHOON:
+		fe = dvb_attach(stv0299_attach, &typhoon_config,
+				    &budget_av->budget.i2c_adap);
+		if (fe) {
+			fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+		}
+		break;
+	case SUBID_DVBS2_KNC1:
+	case SUBID_DVBS2_KNC1_OEM:
+	case SUBID_DVBS2_EASYWATCH:
+		budget_av->reinitialise_demod = 1;
+		if ((fe = dvb_attach(stb0899_attach, &knc1_dvbs2_config, &budget_av->budget.i2c_adap)))
+			dvb_attach(tda8261_attach, fe, &sd1878c_config, &budget_av->budget.i2c_adap);
+
+		break;
+	case SUBID_DVBS_CINERGY1200:
+		fe = dvb_attach(stv0299_attach, &cinergy_1200s_config,
+				    &budget_av->budget.i2c_adap);
+		if (fe) {
+			fe->ops.tuner_ops.set_params = philips_su1278_ty_ci_tuner_set_params;
+		}
+		break;
+
+	case SUBID_DVBC_KNC1:
+	case SUBID_DVBC_KNC1_PLUS:
+	case SUBID_DVBC_CINERGY1200:
+	case SUBID_DVBC_EASYWATCH:
+		budget_av->reinitialise_demod = 1;
+		budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
+		fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
+				     &budget_av->budget.i2c_adap,
+				     read_pwm(budget_av));
+		if (fe == NULL)
+			fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
+					     &budget_av->budget.i2c_adap,
+					     read_pwm(budget_av));
+		if (fe) {
+			fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
+		}
+		break;
+
+	case SUBID_DVBC_EASYWATCH_MK3:
+	case SUBID_DVBC_CINERGY1200_MK3:
+	case SUBID_DVBC_KNC1_MK3:
+	case SUBID_DVBC_KNC1_TDA10024:
+	case SUBID_DVBC_KNC1_PLUS_MK3:
+		budget_av->reinitialise_demod = 1;
+		budget_av->budget.dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
+		fe = dvb_attach(tda10023_attach,
+			&philips_cu1216_tda10023_config,
+			&budget_av->budget.i2c_adap,
+			read_pwm(budget_av));
+		if (fe) {
+			fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set_params;
+		}
+		break;
+
+	case SUBID_DVBT_EASYWATCH:
+	case SUBID_DVBT_KNC1:
+	case SUBID_DVBT_KNC1_PLUS:
+	case SUBID_DVBT_CINERGY1200:
+		budget_av->reinitialise_demod = 1;
+		fe = dvb_attach(tda10046_attach, &philips_tu1216_config,
+				     &budget_av->budget.i2c_adap);
+		if (fe) {
+			fe->ops.tuner_ops.init = philips_tu1216_tuner_init;
+			fe->ops.tuner_ops.set_params = philips_tu1216_tuner_set_params;
+		}
+		break;
+	}
+
+	if (fe == NULL) {
+		pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+		       saa->pci->vendor,
+		       saa->pci->device,
+		       saa->pci->subsystem_vendor,
+		       saa->pci->subsystem_device);
+		return;
+	}
+
+	budget_av->budget.dvb_frontend = fe;
+
+	if (dvb_register_frontend(&budget_av->budget.dvb_adapter,
+				  budget_av->budget.dvb_frontend)) {
+		pr_err("Frontend registration failed!\n");
+		dvb_frontend_detach(budget_av->budget.dvb_frontend);
+		budget_av->budget.dvb_frontend = NULL;
+	}
+}
+
+
+static void budget_av_irq(struct saa7146_dev *dev, u32 * isr)
+{
+	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+
+	dprintk(8, "dev: %p, budget_av: %p\n", dev, budget_av);
+
+	if (*isr & MASK_10)
+		ttpci_budget_irq10_handler(dev, isr);
+}
+
+static int budget_av_detach(struct saa7146_dev *dev)
+{
+	struct budget_av *budget_av = (struct budget_av *) dev->ext_priv;
+	int err;
+
+	dprintk(2, "dev: %p\n", dev);
+
+	if (1 == budget_av->has_saa7113) {
+		saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO);
+
+		msleep(200);
+
+		saa7146_unregister_device(&budget_av->vd, dev);
+
+		saa7146_vv_release(dev);
+	}
+
+	if (budget_av->budget.ci_present)
+		ciintf_deinit(budget_av);
+
+	if (budget_av->budget.dvb_frontend != NULL) {
+		dvb_unregister_frontend(budget_av->budget.dvb_frontend);
+		dvb_frontend_detach(budget_av->budget.dvb_frontend);
+	}
+	err = ttpci_budget_deinit(&budget_av->budget);
+
+	kfree(budget_av);
+
+	return err;
+}
+
+#define KNC1_INPUTS 2
+static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
+	{ 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0,
+		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0,
+		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+};
+
+static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
+{
+	dprintk(1, "VIDIOC_ENUMINPUT %d\n", i->index);
+	if (i->index >= KNC1_INPUTS)
+		return -EINVAL;
+	memcpy(i, &knc1_inputs[i->index], sizeof(struct v4l2_input));
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *fh, unsigned int *i)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct budget_av *budget_av = (struct budget_av *)dev->ext_priv;
+
+	*i = budget_av->cur_input;
+
+	dprintk(1, "VIDIOC_G_INPUT %d\n", *i);
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct budget_av *budget_av = (struct budget_av *)dev->ext_priv;
+
+	dprintk(1, "VIDIOC_S_INPUT %d\n", input);
+	return saa7113_setinput(budget_av, input);
+}
+
+static struct saa7146_ext_vv vv_data;
+
+static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+	struct budget_av *budget_av;
+	u8 *mac;
+	int err;
+
+	dprintk(2, "dev: %p\n", dev);
+
+	if (!(budget_av = kzalloc(sizeof(struct budget_av), GFP_KERNEL)))
+		return -ENOMEM;
+
+	budget_av->has_saa7113 = 0;
+	budget_av->budget.ci_present = 0;
+
+	dev->ext_priv = budget_av;
+
+	err = ttpci_budget_init(&budget_av->budget, dev, info, THIS_MODULE,
+				adapter_nr);
+	if (err) {
+		kfree(budget_av);
+		return err;
+	}
+
+	/* knc1 initialization */
+	saa7146_write(dev, DD1_STREAM_B, 0x04000000);
+	saa7146_write(dev, DD1_INIT, 0x07000600);
+	saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26);
+
+	if (saa7113_init(budget_av) == 0) {
+		budget_av->has_saa7113 = 1;
+		err = saa7146_vv_init(dev, &vv_data);
+		if (err != 0) {
+			/* fixme: proper cleanup here */
+			ERR("cannot init vv subsystem\n");
+			return err;
+		}
+		vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
+		vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
+		vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
+
+		if ((err = saa7146_register_device(&budget_av->vd, dev, "knc1", VFL_TYPE_VIDEO))) {
+			/* fixme: proper cleanup here */
+			ERR("cannot register capture v4l2 device\n");
+			saa7146_vv_release(dev);
+			return err;
+		}
+
+		/* beware: this modifies dev->vv ... */
+		saa7146_set_hps_source_and_sync(dev, SAA7146_HPS_SOURCE_PORT_A,
+						SAA7146_HPS_SYNC_PORT_A);
+
+		saa7113_setinput(budget_av, 0);
+	}
+
+	/* fixme: find some sane values here... */
+	saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
+
+	mac = budget_av->budget.dvb_adapter.proposed_mac;
+	if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) {
+		pr_err("KNC1-%d: Could not read MAC from KNC1 card\n",
+		       budget_av->budget.dvb_adapter.num);
+		eth_zero_addr(mac);
+	} else {
+		pr_info("KNC1-%d: MAC addr = %pM\n",
+			budget_av->budget.dvb_adapter.num, mac);
+	}
+
+	budget_av->budget.dvb_adapter.priv = budget_av;
+	frontend_init(budget_av);
+	ciintf_init(budget_av);
+
+	ttpci_budget_init_hooks(&budget_av->budget);
+
+	return 0;
+}
+
+static struct saa7146_standard standard[] = {
+	{.name = "PAL",.id = V4L2_STD_PAL,
+	 .v_offset = 0x17,.v_field = 288,
+	 .h_offset = 0x14,.h_pixels = 680,
+	 .v_max_out = 576,.h_max_out = 768 },
+
+	{.name = "NTSC",.id = V4L2_STD_NTSC,
+	 .v_offset = 0x16,.v_field = 240,
+	 .h_offset = 0x06,.h_pixels = 708,
+	 .v_max_out = 480,.h_max_out = 640, },
+};
+
+static struct saa7146_ext_vv vv_data = {
+	.inputs = 2,
+	.capabilities = 0,	// perhaps later: V4L2_CAP_VBI_CAPTURE, but that need tweaking with the saa7113
+	.flags = 0,
+	.stds = &standard[0],
+	.num_stds = ARRAY_SIZE(standard),
+};
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(knc1s2,"KNC1 DVB-S2", BUDGET_KNC1S2);
+MAKE_BUDGET_INFO(sates2,"Satelco EasyWatch DVB-S2", BUDGET_KNC1S2);
+MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C);
+MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
+MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewps, "Satelco EasyWatch DVB-S", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(satewcmk3, "Satelco EasyWatch DVB-C MK3", BUDGET_KNC1C_MK3);
+MAKE_BUDGET_INFO(satewt, "Satelco EasyWatch DVB-T", BUDGET_KNC1T);
+MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
+MAKE_BUDGET_INFO(knc1spx4, "KNC1 DVB-S Plus X4", BUDGET_KNC1SP);
+MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
+MAKE_BUDGET_INFO(knc1cmk3, "KNC1 DVB-C MK3", BUDGET_KNC1C_MK3);
+MAKE_BUDGET_INFO(knc1ctda10024, "KNC1 DVB-C TDA10024", BUDGET_KNC1C_TDA10024);
+MAKE_BUDGET_INFO(knc1cpmk3, "KNC1 DVB-C Plus MK3", BUDGET_KNC1CP_MK3);
+MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
+MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
+MAKE_BUDGET_INFO(cin1200sn, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S);
+MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C);
+MAKE_BUDGET_INFO(cin1200cmk3, "Terratec Cinergy 1200 DVB-C MK3", BUDGET_CIN1200C_MK3);
+MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T);
+
+static const struct pci_device_id pci_tbl[] = {
+	MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56),
+	MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010),
+	MAKE_EXTENSION_PCI(knc1s, 0x1894, 0x0010),
+	MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011),
+	MAKE_EXTENSION_PCI(knc1sp, 0x1894, 0x0011),
+	MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0014),
+	MAKE_EXTENSION_PCI(knc1spx4, 0x1894, 0x0015),
+	MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
+	MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0018),
+	MAKE_EXTENSION_PCI(knc1s2, 0x1894, 0x0019),
+	MAKE_EXTENSION_PCI(sates2, 0x1894, 0x001d),
+	MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
+	MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+	MAKE_EXTENSION_PCI(satewps, 0x1894, 0x001b),
+	MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
+	MAKE_EXTENSION_PCI(satewcmk3, 0x1894, 0x002c),
+	MAKE_EXTENSION_PCI(satewt, 0x1894, 0x003a),
+	MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
+	MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
+	MAKE_EXTENSION_PCI(knc1cmk3, 0x1894, 0x0022),
+	MAKE_EXTENSION_PCI(knc1ctda10024, 0x1894, 0x0028),
+	MAKE_EXTENSION_PCI(knc1cpmk3, 0x1894, 0x0023),
+	MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
+	MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031),
+	MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154),
+	MAKE_EXTENSION_PCI(cin1200sn, 0x153b, 0x1155),
+	MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156),
+	MAKE_EXTENSION_PCI(cin1200cmk3, 0x153b, 0x1176),
+	MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157),
+	{
+	 .vendor = 0,
+	}
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_extension budget_extension = {
+	.name = "budget_av",
+	.flags = SAA7146_USE_I2C_IRQ,
+
+	.pci_tbl = pci_tbl,
+
+	.module = THIS_MODULE,
+	.attach = budget_av_attach,
+	.detach = budget_av_detach,
+
+	.irq_mask = MASK_10,
+	.irq_func = budget_av_irq,
+};
+
+static int __init budget_av_init(void)
+{
+	return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_av_exit(void)
+{
+	saa7146_unregister_extension(&budget_extension);
+}
+
+module_init(budget_av_init);
+module_exit(budget_av_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget-ci.c b/drivers/staging/media/deprecated/saa7146/ttpci/budget-ci.c
new file mode 100644
index 000000000000..d59d18647371
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/ttpci/budget-ci.c
@@ -0,0 +1,1574 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * budget-ci.c: driver for the SAA7146 based Budget DVB cards
+ *
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ *     msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM>
+ *     partially based on the Siemens DVB driver by Ralph+Marcus Metzler
+ *
+ * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * the project's page is at https://linuxtv.org
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
+
+#include "budget.h"
+
+#include <media/dvb_ca_en50221.h>
+#include "stv0299.h"
+#include "stv0297.h"
+#include "tda1004x.h"
+#include "stb0899_drv.h"
+#include "stb0899_reg.h"
+#include "stb0899_cfg.h"
+#include "stb6100.h"
+#include "stb6100_cfg.h"
+#include "lnbp21.h"
+#include "bsbe1.h"
+#include "bsru6.h"
+#include "tda1002x.h"
+#include "tda827x.h"
+#include "bsbe1-d01a.h"
+
+#define MODULE_NAME "budget_ci"
+
+/*
+ * Regarding DEBIADDR_IR:
+ * Some CI modules hang if random addresses are read.
+ * Using address 0x4000 for the IR read means that we
+ * use the same address as for CI version, which should
+ * be a safe default.
+ */
+#define DEBIADDR_IR		0x4000
+#define DEBIADDR_CICONTROL	0x0000
+#define DEBIADDR_CIVERSION	0x4000
+#define DEBIADDR_IO		0x1000
+#define DEBIADDR_ATTR		0x3000
+
+#define CICONTROL_RESET		0x01
+#define CICONTROL_ENABLETS	0x02
+#define CICONTROL_CAMDETECT	0x08
+
+#define DEBICICTL		0x00420000
+#define DEBICICAM		0x02420000
+
+#define SLOTSTATUS_NONE		1
+#define SLOTSTATUS_PRESENT	2
+#define SLOTSTATUS_RESET	4
+#define SLOTSTATUS_READY	8
+#define SLOTSTATUS_OCCUPIED	(SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
+
+/* RC5 device wildcard */
+#define IR_DEVICE_ANY		255
+
+static int rc5_device = -1;
+module_param(rc5_device, int, 0644);
+MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
+
+static int ir_debug;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct budget_ci_ir {
+	struct rc_dev *dev;
+	struct tasklet_struct msp430_irq_tasklet;
+	char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
+	char phys[32];
+	int rc5_device;
+	u32 ir_key;
+	bool have_command;
+	bool full_rc5;		/* Outputs a full RC5 code */
+};
+
+struct budget_ci {
+	struct budget budget;
+	struct tasklet_struct ciintf_irq_tasklet;
+	int slot_status;
+	int ci_irq;
+	struct dvb_ca_en50221 ca;
+	struct budget_ci_ir ir;
+	u8 tuner_pll_address; /* used for philips_tdm1316l configs */
+};
+
+static void msp430_ir_interrupt(struct tasklet_struct *t)
+{
+	struct budget_ci_ir *ir = from_tasklet(ir, t, msp430_irq_tasklet);
+	struct budget_ci *budget_ci = container_of(ir, typeof(*budget_ci), ir);
+	struct rc_dev *dev = budget_ci->ir.dev;
+	u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
+
+	/*
+	 * The msp430 chip can generate two different bytes, command and device
+	 *
+	 * type1: X1CCCCCC, C = command bits (0 - 63)
+	 * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
+	 *
+	 * Each signal from the remote control can generate one or more command
+	 * bytes and one or more device bytes. For the repeated bytes, the
+	 * highest bit (X) is set. The first command byte is always generated
+	 * before the first device byte. Other than that, no specific order
+	 * seems to apply. To make life interesting, bytes can also be lost.
+	 *
+	 * Only when we have a command and device byte, a keypress is
+	 * generated.
+	 */
+
+	if (ir_debug)
+		printk("budget_ci: received byte 0x%02x\n", command);
+
+	/* Remove repeat bit, we use every command */
+	command = command & 0x7f;
+
+	/* Is this a RC5 command byte? */
+	if (command & 0x40) {
+		budget_ci->ir.have_command = true;
+		budget_ci->ir.ir_key = command & 0x3f;
+		return;
+	}
+
+	/* It's a RC5 device byte */
+	if (!budget_ci->ir.have_command)
+		return;
+	budget_ci->ir.have_command = false;
+
+	if (budget_ci->ir.rc5_device != IR_DEVICE_ANY &&
+	    budget_ci->ir.rc5_device != (command & 0x1f))
+		return;
+
+	if (budget_ci->ir.full_rc5) {
+		rc_keydown(dev, RC_PROTO_RC5,
+			   RC_SCANCODE_RC5(budget_ci->ir.rc5_device, budget_ci->ir.ir_key),
+			   !!(command & 0x20));
+		return;
+	}
+
+	/* FIXME: We should generate complete scancodes for all devices */
+	rc_keydown(dev, RC_PROTO_UNKNOWN, budget_ci->ir.ir_key,
+		   !!(command & 0x20));
+}
+
+static int msp430_ir_init(struct budget_ci *budget_ci)
+{
+	struct saa7146_dev *saa = budget_ci->budget.dev;
+	struct rc_dev *dev;
+	int error;
+
+	dev = rc_allocate_device(RC_DRIVER_SCANCODE);
+	if (!dev) {
+		printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
+		return -ENOMEM;
+	}
+
+	snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name),
+		 "Budget-CI dvb ir receiver %s", saa->name);
+	snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
+		 "pci-%s/ir0", pci_name(saa->pci));
+
+	dev->driver_name = MODULE_NAME;
+	dev->device_name = budget_ci->ir.name;
+	dev->input_phys = budget_ci->ir.phys;
+	dev->input_id.bustype = BUS_PCI;
+	dev->input_id.version = 1;
+	if (saa->pci->subsystem_vendor) {
+		dev->input_id.vendor = saa->pci->subsystem_vendor;
+		dev->input_id.product = saa->pci->subsystem_device;
+	} else {
+		dev->input_id.vendor = saa->pci->vendor;
+		dev->input_id.product = saa->pci->device;
+	}
+	dev->dev.parent = &saa->pci->dev;
+
+	if (rc5_device < 0)
+		budget_ci->ir.rc5_device = IR_DEVICE_ANY;
+	else
+		budget_ci->ir.rc5_device = rc5_device;
+
+	/* Select keymap and address */
+	switch (budget_ci->budget.dev->pci->subsystem_device) {
+	case 0x100c:
+	case 0x100f:
+	case 0x1011:
+	case 0x1012:
+		/* The hauppauge keymap is a superset of these remotes */
+		dev->map_name = RC_MAP_HAUPPAUGE;
+		budget_ci->ir.full_rc5 = true;
+
+		if (rc5_device < 0)
+			budget_ci->ir.rc5_device = 0x1f;
+		break;
+	case 0x1010:
+	case 0x1017:
+	case 0x1019:
+	case 0x101a:
+	case 0x101b:
+		/* for the Technotrend 1500 bundled remote */
+		dev->map_name = RC_MAP_TT_1500;
+		break;
+	default:
+		/* unknown remote */
+		dev->map_name = RC_MAP_BUDGET_CI_OLD;
+		break;
+	}
+	if (!budget_ci->ir.full_rc5)
+		dev->scancode_mask = 0xff;
+
+	error = rc_register_device(dev);
+	if (error) {
+		printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
+		rc_free_device(dev);
+		return error;
+	}
+
+	budget_ci->ir.dev = dev;
+
+	tasklet_setup(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt);
+
+	SAA7146_IER_ENABLE(saa, MASK_06);
+	saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
+
+	return 0;
+}
+
+static void msp430_ir_deinit(struct budget_ci *budget_ci)
+{
+	struct saa7146_dev *saa = budget_ci->budget.dev;
+
+	SAA7146_IER_DISABLE(saa, MASK_06);
+	saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+	tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
+
+	rc_unregister_device(budget_ci->ir.dev);
+}
+
+static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
+				     DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0);
+}
+
+static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
+				      DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0);
+}
+
+static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM,
+				     DEBIADDR_IO | (address & 3), 1, 1, 0);
+}
+
+static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM,
+				      DEBIADDR_IO | (address & 3), 1, value, 1, 0);
+}
+
+static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+	struct saa7146_dev *saa = budget_ci->budget.dev;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	if (budget_ci->ci_irq) {
+		// trigger on RISING edge during reset so we know when READY is re-asserted
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	}
+	budget_ci->slot_status = SLOTSTATUS_RESET;
+	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
+	msleep(1);
+	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
+			       CICONTROL_RESET, 1, 0);
+
+	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+	return 0;
+}
+
+static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+	struct saa7146_dev *saa = budget_ci->budget.dev;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI);
+	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
+	return 0;
+}
+
+static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+	struct saa7146_dev *saa = budget_ci->budget.dev;
+	int tmp;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO);
+
+	tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
+			       tmp | CICONTROL_ENABLETS, 1, 0);
+
+	ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA);
+	return 0;
+}
+
+static void ciintf_interrupt(struct tasklet_struct *t)
+{
+	struct budget_ci *budget_ci = from_tasklet(budget_ci, t,
+						   ciintf_irq_tasklet);
+	struct saa7146_dev *saa = budget_ci->budget.dev;
+	unsigned int flags;
+
+	// ensure we don't get spurious IRQs during initialisation
+	if (!budget_ci->budget.ci_present)
+		return;
+
+	// read the CAM status
+	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+	if (flags & CICONTROL_CAMDETECT) {
+
+		// GPIO should be set to trigger on falling edge if a CAM is present
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+
+		if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+			// CAM insertion IRQ
+			budget_ci->slot_status = SLOTSTATUS_PRESENT;
+			dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
+						     DVB_CA_EN50221_CAMCHANGE_INSERTED);
+
+		} else if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+			// CAM ready (reset completed)
+			budget_ci->slot_status = SLOTSTATUS_READY;
+			dvb_ca_en50221_camready_irq(&budget_ci->ca, 0);
+
+		} else if (budget_ci->slot_status & SLOTSTATUS_READY) {
+			// FR/DA IRQ
+			dvb_ca_en50221_frda_irq(&budget_ci->ca, 0);
+		}
+	} else {
+
+		// trigger on rising edge if a CAM is not present - when a CAM is inserted, we
+		// only want to get the IRQ when it sets READY. If we trigger on the falling edge,
+		// the CAM might not actually be ready yet.
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+
+		// generate a CAM removal IRQ if we haven't already
+		if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) {
+			// CAM removal IRQ
+			budget_ci->slot_status = SLOTSTATUS_NONE;
+			dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0,
+						     DVB_CA_EN50221_CAMCHANGE_REMOVED);
+		}
+	}
+}
+
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+	unsigned int flags;
+
+	// ensure we don't get spurious IRQs during initialisation
+	if (!budget_ci->budget.ci_present)
+		return -EINVAL;
+
+	// read the CAM status
+	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+	if (flags & CICONTROL_CAMDETECT) {
+		// mark it as present if it wasn't before
+		if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+			budget_ci->slot_status = SLOTSTATUS_PRESENT;
+		}
+
+		// during a RESET, we check if we can read from IO memory to see when CAM is ready
+		if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+			if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
+				budget_ci->slot_status = SLOTSTATUS_READY;
+			}
+		}
+	} else {
+		budget_ci->slot_status = SLOTSTATUS_NONE;
+	}
+
+	if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+		if (budget_ci->slot_status & SLOTSTATUS_READY) {
+			return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+		}
+		return DVB_CA_EN50221_POLL_CAM_PRESENT;
+	}
+
+	return 0;
+}
+
+static int ciintf_init(struct budget_ci *budget_ci)
+{
+	struct saa7146_dev *saa = budget_ci->budget.dev;
+	int flags;
+	int result;
+	int ci_version;
+	int ca_flags;
+
+	memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
+
+	// enable DEBI pins
+	saa7146_write(saa, MC1, MASK_27 | MASK_11);
+
+	// test if it is there
+	ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
+	if ((ci_version & 0xa0) != 0xa0) {
+		result = -ENODEV;
+		goto error;
+	}
+
+	// determine whether a CAM is present or not
+	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+	budget_ci->slot_status = SLOTSTATUS_NONE;
+	if (flags & CICONTROL_CAMDETECT)
+		budget_ci->slot_status = SLOTSTATUS_PRESENT;
+
+	// version 0xa2 of the CI firmware doesn't generate interrupts
+	if (ci_version == 0xa2) {
+		ca_flags = 0;
+		budget_ci->ci_irq = 0;
+	} else {
+		ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
+				DVB_CA_EN50221_FLAG_IRQ_FR |
+				DVB_CA_EN50221_FLAG_IRQ_DA;
+		budget_ci->ci_irq = 1;
+	}
+
+	// register CI interface
+	budget_ci->ca.owner = THIS_MODULE;
+	budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
+	budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem;
+	budget_ci->ca.read_cam_control = ciintf_read_cam_control;
+	budget_ci->ca.write_cam_control = ciintf_write_cam_control;
+	budget_ci->ca.slot_reset = ciintf_slot_reset;
+	budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
+	budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
+	budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
+	budget_ci->ca.data = budget_ci;
+	if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
+					  &budget_ci->ca,
+					  ca_flags, 1)) != 0) {
+		printk("budget_ci: CI interface detected, but initialisation failed.\n");
+		goto error;
+	}
+
+	// Setup CI slot IRQ
+	if (budget_ci->ci_irq) {
+		tasklet_setup(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt);
+		if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+		} else {
+			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+		}
+		SAA7146_IER_ENABLE(saa, MASK_03);
+	}
+
+	// enable interface
+	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
+			       CICONTROL_RESET, 1, 0);
+
+	// success!
+	printk("budget_ci: CI interface initialised\n");
+	budget_ci->budget.ci_present = 1;
+
+	// forge a fake CI IRQ so the CAM state is setup correctly
+	if (budget_ci->ci_irq) {
+		flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+		if (budget_ci->slot_status != SLOTSTATUS_NONE)
+			flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
+		dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+	}
+
+	return 0;
+
+error:
+	saa7146_write(saa, MC1, MASK_27);
+	return result;
+}
+
+static void ciintf_deinit(struct budget_ci *budget_ci)
+{
+	struct saa7146_dev *saa = budget_ci->budget.dev;
+
+	// disable CI interrupts
+	if (budget_ci->ci_irq) {
+		SAA7146_IER_DISABLE(saa, MASK_03);
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+		tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+	}
+
+	// reset interface
+	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
+	msleep(1);
+	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
+			       CICONTROL_RESET, 1, 0);
+
+	// disable TS data stream to CI interface
+	saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT);
+
+	// release the CA device
+	dvb_ca_en50221_release(&budget_ci->ca);
+
+	// disable DEBI pins
+	saa7146_write(saa, MC1, MASK_27);
+}
+
+static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
+
+	dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci);
+
+	if (*isr & MASK_06)
+		tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet);
+
+	if (*isr & MASK_10)
+		ttpci_budget_irq10_handler(dev, isr);
+
+	if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
+		tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
+}
+
+static u8 philips_su1278_tt_inittab[] = {
+	0x01, 0x0f,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x5b,
+	0x05, 0x85,
+	0x06, 0x02,
+	0x07, 0x00,
+	0x08, 0x02,
+	0x09, 0x00,
+	0x0C, 0x01,
+	0x0D, 0x81,
+	0x0E, 0x44,
+	0x0f, 0x14,
+	0x10, 0x3c,
+	0x11, 0x84,
+	0x12, 0xda,
+	0x13, 0x97,
+	0x14, 0x95,
+	0x15, 0xc9,
+	0x16, 0x19,
+	0x17, 0x8c,
+	0x18, 0x59,
+	0x19, 0xf8,
+	0x1a, 0xfe,
+	0x1c, 0x7f,
+	0x1d, 0x00,
+	0x1e, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,
+	0x29, 0x28,
+	0x2a, 0x14,
+	0x2b, 0x0f,
+	0x2c, 0x09,
+	0x2d, 0x09,
+	0x31, 0x1f,
+	0x32, 0x19,
+	0x33, 0xfc,
+	0x34, 0x93,
+	0xff, 0xff
+};
+
+static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
+{
+	stv0299_writereg(fe, 0x0e, 0x44);
+	if (srate >= 10000000) {
+		stv0299_writereg(fe, 0x13, 0x97);
+		stv0299_writereg(fe, 0x14, 0x95);
+		stv0299_writereg(fe, 0x15, 0xc9);
+		stv0299_writereg(fe, 0x17, 0x8c);
+		stv0299_writereg(fe, 0x1a, 0xfe);
+		stv0299_writereg(fe, 0x1c, 0x7f);
+		stv0299_writereg(fe, 0x2d, 0x09);
+	} else {
+		stv0299_writereg(fe, 0x13, 0x99);
+		stv0299_writereg(fe, 0x14, 0x8d);
+		stv0299_writereg(fe, 0x15, 0xce);
+		stv0299_writereg(fe, 0x17, 0x43);
+		stv0299_writereg(fe, 0x1a, 0x1d);
+		stv0299_writereg(fe, 0x1c, 0x12);
+		stv0299_writereg(fe, 0x2d, 0x05);
+	}
+	stv0299_writereg(fe, 0x0e, 0x23);
+	stv0299_writereg(fe, 0x0f, 0x94);
+	stv0299_writereg(fe, 0x10, 0x39);
+	stv0299_writereg(fe, 0x15, 0xc9);
+
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+	stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
+
+	return 0;
+}
+
+static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+	u32 div;
+	u8 buf[4];
+	struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
+
+	if ((p->frequency < 950000) || (p->frequency > 2150000))
+		return -EINVAL;
+
+	div = (p->frequency + (500 - 1)) / 500;	/* round correctly */
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2;
+	buf[3] = 0x20;
+
+	if (p->symbol_rate < 4000000)
+		buf[3] |= 1;
+
+	if (p->frequency < 1250000)
+		buf[3] |= 0;
+	else if (p->frequency < 1550000)
+		buf[3] |= 0x40;
+	else if (p->frequency < 2050000)
+		buf[3] |= 0x80;
+	else if (p->frequency < 2150000)
+		buf[3] |= 0xC0;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static const struct stv0299_config philips_su1278_tt_config = {
+
+	.demod_address = 0x68,
+	.inittab = philips_su1278_tt_inittab,
+	.mclk = 64000000UL,
+	.invert = 0,
+	.skip_reinit = 1,
+	.lock_output = STV0299_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 50,
+	.set_symbol_rate = philips_su1278_tt_set_symbol_rate,
+};
+
+
+
+static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+	static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab };
+	static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 };
+	struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len =
+			sizeof(td1316_init) };
+
+	// setup PLL configuration
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+		return -EIO;
+	msleep(1);
+
+	// disable the mc44BC374c (do not check for errors)
+	tuner_msg.addr = 0x65;
+	tuner_msg.buf = disable_mc44BC374c;
+	tuner_msg.len = sizeof(disable_mc44BC374c);
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) {
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 1);
+		i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1);
+	}
+
+	return 0;
+}
+
+static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+	u8 tuner_buf[4];
+	struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) };
+	int tuner_frequency = 0;
+	u8 band, cp, filter;
+
+	// determine charge pump
+	tuner_frequency = p->frequency + 36130000;
+	if (tuner_frequency < 87000000)
+		return -EINVAL;
+	else if (tuner_frequency < 130000000)
+		cp = 3;
+	else if (tuner_frequency < 160000000)
+		cp = 5;
+	else if (tuner_frequency < 200000000)
+		cp = 6;
+	else if (tuner_frequency < 290000000)
+		cp = 3;
+	else if (tuner_frequency < 420000000)
+		cp = 5;
+	else if (tuner_frequency < 480000000)
+		cp = 6;
+	else if (tuner_frequency < 620000000)
+		cp = 3;
+	else if (tuner_frequency < 830000000)
+		cp = 5;
+	else if (tuner_frequency < 895000000)
+		cp = 7;
+	else
+		return -EINVAL;
+
+	// determine band
+	if (p->frequency < 49000000)
+		return -EINVAL;
+	else if (p->frequency < 159000000)
+		band = 1;
+	else if (p->frequency < 444000000)
+		band = 2;
+	else if (p->frequency < 861000000)
+		band = 4;
+	else
+		return -EINVAL;
+
+	// setup PLL filter and TDA9889
+	switch (p->bandwidth_hz) {
+	case 6000000:
+		tda1004x_writereg(fe, 0x0C, 0x14);
+		filter = 0;
+		break;
+
+	case 7000000:
+		tda1004x_writereg(fe, 0x0C, 0x80);
+		filter = 0;
+		break;
+
+	case 8000000:
+		tda1004x_writereg(fe, 0x0C, 0x14);
+		filter = 1;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	// calculate divisor
+	// ((36130000+((1000000/6)/2)) + Finput)/(1000000/6)
+	tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000;
+
+	// setup tuner buffer
+	tuner_buf[0] = tuner_frequency >> 8;
+	tuner_buf[1] = tuner_frequency & 0xff;
+	tuner_buf[2] = 0xca;
+	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+		return -EIO;
+
+	msleep(1);
+	return 0;
+}
+
+static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe,
+					     const struct firmware **fw, char *name)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+
+	return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev);
+}
+
+static struct tda1004x_config philips_tdm1316l_config = {
+
+	.demod_address = 0x8,
+	.invert = 0,
+	.invert_oclk = 0,
+	.xtal_freq = TDA10046_XTAL_4M,
+	.agc_config = TDA10046_AGC_DEFAULT,
+	.if_freq = TDA10046_FREQ_3617,
+	.request_firmware = philips_tdm1316l_request_firmware,
+};
+
+static struct tda1004x_config philips_tdm1316l_config_invert = {
+
+	.demod_address = 0x8,
+	.invert = 1,
+	.invert_oclk = 0,
+	.xtal_freq = TDA10046_XTAL_4M,
+	.agc_config = TDA10046_AGC_DEFAULT,
+	.if_freq = TDA10046_FREQ_3617,
+	.request_firmware = philips_tdm1316l_request_firmware,
+};
+
+static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+	u8 tuner_buf[5];
+	struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,
+				    .flags = 0,
+				    .buf = tuner_buf,
+				    .len = sizeof(tuner_buf) };
+	int tuner_frequency = 0;
+	u8 band, cp, filter;
+
+	// determine charge pump
+	tuner_frequency = p->frequency + 36125000;
+	if (tuner_frequency < 87000000)
+		return -EINVAL;
+	else if (tuner_frequency < 130000000) {
+		cp = 3;
+		band = 1;
+	} else if (tuner_frequency < 160000000) {
+		cp = 5;
+		band = 1;
+	} else if (tuner_frequency < 200000000) {
+		cp = 6;
+		band = 1;
+	} else if (tuner_frequency < 290000000) {
+		cp = 3;
+		band = 2;
+	} else if (tuner_frequency < 420000000) {
+		cp = 5;
+		band = 2;
+	} else if (tuner_frequency < 480000000) {
+		cp = 6;
+		band = 2;
+	} else if (tuner_frequency < 620000000) {
+		cp = 3;
+		band = 4;
+	} else if (tuner_frequency < 830000000) {
+		cp = 5;
+		band = 4;
+	} else if (tuner_frequency < 895000000) {
+		cp = 7;
+		band = 4;
+	} else
+		return -EINVAL;
+
+	// assume PLL filter should always be 8MHz for the moment.
+	filter = 1;
+
+	// calculate divisor
+	tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500;
+
+	// setup tuner buffer
+	tuner_buf[0] = tuner_frequency >> 8;
+	tuner_buf[1] = tuner_frequency & 0xff;
+	tuner_buf[2] = 0xc8;
+	tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+	tuner_buf[4] = 0x80;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+		return -EIO;
+
+	msleep(50);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+		return -EIO;
+
+	msleep(1);
+
+	return 0;
+}
+
+static u8 dvbc_philips_tdm1316l_inittab[] = {
+	0x80, 0x01,
+	0x80, 0x00,
+	0x81, 0x01,
+	0x81, 0x00,
+	0x00, 0x09,
+	0x01, 0x69,
+	0x03, 0x00,
+	0x04, 0x00,
+	0x07, 0x00,
+	0x08, 0x00,
+	0x20, 0x00,
+	0x21, 0x40,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x24, 0x40,
+	0x25, 0x88,
+	0x30, 0xff,
+	0x31, 0x00,
+	0x32, 0xff,
+	0x33, 0x00,
+	0x34, 0x50,
+	0x35, 0x7f,
+	0x36, 0x00,
+	0x37, 0x20,
+	0x38, 0x00,
+	0x40, 0x1c,
+	0x41, 0xff,
+	0x42, 0x29,
+	0x43, 0x20,
+	0x44, 0xff,
+	0x45, 0x00,
+	0x46, 0x00,
+	0x49, 0x04,
+	0x4a, 0x00,
+	0x4b, 0x7b,
+	0x52, 0x30,
+	0x55, 0xae,
+	0x56, 0x47,
+	0x57, 0xe1,
+	0x58, 0x3a,
+	0x5a, 0x1e,
+	0x5b, 0x34,
+	0x60, 0x00,
+	0x63, 0x00,
+	0x64, 0x00,
+	0x65, 0x00,
+	0x66, 0x00,
+	0x67, 0x00,
+	0x68, 0x00,
+	0x69, 0x00,
+	0x6a, 0x02,
+	0x6b, 0x00,
+	0x70, 0xff,
+	0x71, 0x00,
+	0x72, 0x00,
+	0x73, 0x00,
+	0x74, 0x0c,
+	0x80, 0x00,
+	0x81, 0x00,
+	0x82, 0x00,
+	0x83, 0x00,
+	0x84, 0x04,
+	0x85, 0x80,
+	0x86, 0x24,
+	0x87, 0x78,
+	0x88, 0x10,
+	0x89, 0x00,
+	0x90, 0x01,
+	0x91, 0x01,
+	0xa0, 0x04,
+	0xa1, 0x00,
+	0xa2, 0x00,
+	0xb0, 0x91,
+	0xb1, 0x0b,
+	0xc0, 0x53,
+	0xc1, 0x70,
+	0xc2, 0x12,
+	0xd0, 0x00,
+	0xd1, 0x00,
+	0xd2, 0x00,
+	0xd3, 0x00,
+	0xd4, 0x00,
+	0xd5, 0x00,
+	0xde, 0x00,
+	0xdf, 0x00,
+	0x61, 0x38,
+	0x62, 0x0a,
+	0x53, 0x13,
+	0x59, 0x08,
+	0xff, 0xff,
+};
+
+static struct stv0297_config dvbc_philips_tdm1316l_config = {
+	.demod_address = 0x1c,
+	.inittab = dvbc_philips_tdm1316l_inittab,
+	.invert = 0,
+	.stop_during_read = 1,
+};
+
+static struct tda10023_config tda10023_config = {
+	.demod_address = 0xc,
+	.invert = 0,
+	.xtal = 16000000,
+	.pll_m = 11,
+	.pll_p = 3,
+	.pll_n = 1,
+	.deltaf = 0xa511,
+};
+
+static struct tda827x_config tda827x_config = {
+	.config = 0,
+};
+
+/* TT S2-3200 DVB-S (STB0899) Inittab */
+static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = {
+
+	{ STB0899_DEV_ID		, 0x81 },
+	{ STB0899_DISCNTRL1		, 0x32 },
+	{ STB0899_DISCNTRL2		, 0x80 },
+	{ STB0899_DISRX_ST0		, 0x04 },
+	{ STB0899_DISRX_ST1		, 0x00 },
+	{ STB0899_DISPARITY		, 0x00 },
+	{ STB0899_DISSTATUS		, 0x20 },
+	{ STB0899_DISF22		, 0x8c },
+	{ STB0899_DISF22RX		, 0x9a },
+	{ STB0899_SYSREG		, 0x0b },
+	{ STB0899_ACRPRESC		, 0x11 },
+	{ STB0899_ACRDIV1		, 0x0a },
+	{ STB0899_ACRDIV2		, 0x05 },
+	{ STB0899_DACR1			, 0x00 },
+	{ STB0899_DACR2			, 0x00 },
+	{ STB0899_OUTCFG		, 0x00 },
+	{ STB0899_MODECFG		, 0x00 },
+	{ STB0899_IRQSTATUS_3		, 0x30 },
+	{ STB0899_IRQSTATUS_2		, 0x00 },
+	{ STB0899_IRQSTATUS_1		, 0x00 },
+	{ STB0899_IRQSTATUS_0		, 0x00 },
+	{ STB0899_IRQMSK_3		, 0xf3 },
+	{ STB0899_IRQMSK_2		, 0xfc },
+	{ STB0899_IRQMSK_1		, 0xff },
+	{ STB0899_IRQMSK_0		, 0xff },
+	{ STB0899_IRQCFG		, 0x00 },
+	{ STB0899_I2CCFG		, 0x88 },
+	{ STB0899_I2CRPT		, 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */
+	{ STB0899_IOPVALUE5		, 0x00 },
+	{ STB0899_IOPVALUE4		, 0x20 },
+	{ STB0899_IOPVALUE3		, 0xc9 },
+	{ STB0899_IOPVALUE2		, 0x90 },
+	{ STB0899_IOPVALUE1		, 0x40 },
+	{ STB0899_IOPVALUE0		, 0x00 },
+	{ STB0899_GPIO00CFG		, 0x82 },
+	{ STB0899_GPIO01CFG		, 0x82 },
+	{ STB0899_GPIO02CFG		, 0x82 },
+	{ STB0899_GPIO03CFG		, 0x82 },
+	{ STB0899_GPIO04CFG		, 0x82 },
+	{ STB0899_GPIO05CFG		, 0x82 },
+	{ STB0899_GPIO06CFG		, 0x82 },
+	{ STB0899_GPIO07CFG		, 0x82 },
+	{ STB0899_GPIO08CFG		, 0x82 },
+	{ STB0899_GPIO09CFG		, 0x82 },
+	{ STB0899_GPIO10CFG		, 0x82 },
+	{ STB0899_GPIO11CFG		, 0x82 },
+	{ STB0899_GPIO12CFG		, 0x82 },
+	{ STB0899_GPIO13CFG		, 0x82 },
+	{ STB0899_GPIO14CFG		, 0x82 },
+	{ STB0899_GPIO15CFG		, 0x82 },
+	{ STB0899_GPIO16CFG		, 0x82 },
+	{ STB0899_GPIO17CFG		, 0x82 },
+	{ STB0899_GPIO18CFG		, 0x82 },
+	{ STB0899_GPIO19CFG		, 0x82 },
+	{ STB0899_GPIO20CFG		, 0x82 },
+	{ STB0899_SDATCFG		, 0xb8 },
+	{ STB0899_SCLTCFG		, 0xba },
+	{ STB0899_AGCRFCFG		, 0x1c }, /* 0x11 */
+	{ STB0899_GPIO22		, 0x82 }, /* AGCBB2CFG */
+	{ STB0899_GPIO21		, 0x91 }, /* AGCBB1CFG */
+	{ STB0899_DIRCLKCFG		, 0x82 },
+	{ STB0899_CLKOUT27CFG		, 0x7e },
+	{ STB0899_STDBYCFG		, 0x82 },
+	{ STB0899_CS0CFG		, 0x82 },
+	{ STB0899_CS1CFG		, 0x82 },
+	{ STB0899_DISEQCOCFG		, 0x20 },
+	{ STB0899_GPIO32CFG		, 0x82 },
+	{ STB0899_GPIO33CFG		, 0x82 },
+	{ STB0899_GPIO34CFG		, 0x82 },
+	{ STB0899_GPIO35CFG		, 0x82 },
+	{ STB0899_GPIO36CFG		, 0x82 },
+	{ STB0899_GPIO37CFG		, 0x82 },
+	{ STB0899_GPIO38CFG		, 0x82 },
+	{ STB0899_GPIO39CFG		, 0x82 },
+	{ STB0899_NCOARSE		, 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+	{ STB0899_SYNTCTRL		, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+	{ STB0899_FILTCTRL		, 0x00 },
+	{ STB0899_SYSCTRL		, 0x00 },
+	{ STB0899_STOPCLK1		, 0x20 },
+	{ STB0899_STOPCLK2		, 0x00 },
+	{ STB0899_INTBUFSTATUS		, 0x00 },
+	{ STB0899_INTBUFCTRL		, 0x0a },
+	{ 0xffff			, 0xff },
+};
+
+static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = {
+	{ STB0899_DEMOD			, 0x00 },
+	{ STB0899_RCOMPC		, 0xc9 },
+	{ STB0899_AGC1CN		, 0x41 },
+	{ STB0899_AGC1REF		, 0x10 },
+	{ STB0899_RTC			, 0x7a },
+	{ STB0899_TMGCFG		, 0x4e },
+	{ STB0899_AGC2REF		, 0x34 },
+	{ STB0899_TLSR			, 0x84 },
+	{ STB0899_CFD			, 0xc7 },
+	{ STB0899_ACLC			, 0x87 },
+	{ STB0899_BCLC			, 0x94 },
+	{ STB0899_EQON			, 0x41 },
+	{ STB0899_LDT			, 0xdd },
+	{ STB0899_LDT2			, 0xc9 },
+	{ STB0899_EQUALREF		, 0xb4 },
+	{ STB0899_TMGRAMP		, 0x10 },
+	{ STB0899_TMGTHD		, 0x30 },
+	{ STB0899_IDCCOMP		, 0xfb },
+	{ STB0899_QDCCOMP		, 0x03 },
+	{ STB0899_POWERI		, 0x3b },
+	{ STB0899_POWERQ		, 0x3d },
+	{ STB0899_RCOMP			, 0x81 },
+	{ STB0899_AGCIQIN		, 0x80 },
+	{ STB0899_AGC2I1		, 0x04 },
+	{ STB0899_AGC2I2		, 0xf5 },
+	{ STB0899_TLIR			, 0x25 },
+	{ STB0899_RTF			, 0x80 },
+	{ STB0899_DSTATUS		, 0x00 },
+	{ STB0899_LDI			, 0xca },
+	{ STB0899_CFRM			, 0xf1 },
+	{ STB0899_CFRL			, 0xf3 },
+	{ STB0899_NIRM			, 0x2a },
+	{ STB0899_NIRL			, 0x05 },
+	{ STB0899_ISYMB			, 0x17 },
+	{ STB0899_QSYMB			, 0xfa },
+	{ STB0899_SFRH			, 0x2f },
+	{ STB0899_SFRM			, 0x68 },
+	{ STB0899_SFRL			, 0x40 },
+	{ STB0899_SFRUPH		, 0x2f },
+	{ STB0899_SFRUPM		, 0x68 },
+	{ STB0899_SFRUPL		, 0x40 },
+	{ STB0899_EQUAI1		, 0xfd },
+	{ STB0899_EQUAQ1		, 0x04 },
+	{ STB0899_EQUAI2		, 0x0f },
+	{ STB0899_EQUAQ2		, 0xff },
+	{ STB0899_EQUAI3		, 0xdf },
+	{ STB0899_EQUAQ3		, 0xfa },
+	{ STB0899_EQUAI4		, 0x37 },
+	{ STB0899_EQUAQ4		, 0x0d },
+	{ STB0899_EQUAI5		, 0xbd },
+	{ STB0899_EQUAQ5		, 0xf7 },
+	{ STB0899_DSTATUS2		, 0x00 },
+	{ STB0899_VSTATUS		, 0x00 },
+	{ STB0899_VERROR		, 0xff },
+	{ STB0899_IQSWAP		, 0x2a },
+	{ STB0899_ECNT1M		, 0x00 },
+	{ STB0899_ECNT1L		, 0x00 },
+	{ STB0899_ECNT2M		, 0x00 },
+	{ STB0899_ECNT2L		, 0x00 },
+	{ STB0899_ECNT3M		, 0x00 },
+	{ STB0899_ECNT3L		, 0x00 },
+	{ STB0899_FECAUTO1		, 0x06 },
+	{ STB0899_FECM			, 0x01 },
+	{ STB0899_VTH12			, 0xf0 },
+	{ STB0899_VTH23			, 0xa0 },
+	{ STB0899_VTH34			, 0x78 },
+	{ STB0899_VTH56			, 0x4e },
+	{ STB0899_VTH67			, 0x48 },
+	{ STB0899_VTH78			, 0x38 },
+	{ STB0899_PRVIT			, 0xff },
+	{ STB0899_VITSYNC		, 0x19 },
+	{ STB0899_RSULC			, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+	{ STB0899_TSULC			, 0x42 },
+	{ STB0899_RSLLC			, 0x40 },
+	{ STB0899_TSLPL			, 0x12 },
+	{ STB0899_TSCFGH		, 0x0c },
+	{ STB0899_TSCFGM		, 0x00 },
+	{ STB0899_TSCFGL		, 0x0c },
+	{ STB0899_TSOUT			, 0x4d }, /* 0x0d for CAM */
+	{ STB0899_RSSYNCDEL		, 0x00 },
+	{ STB0899_TSINHDELH		, 0x02 },
+	{ STB0899_TSINHDELM		, 0x00 },
+	{ STB0899_TSINHDELL		, 0x00 },
+	{ STB0899_TSLLSTKM		, 0x00 },
+	{ STB0899_TSLLSTKL		, 0x00 },
+	{ STB0899_TSULSTKM		, 0x00 },
+	{ STB0899_TSULSTKL		, 0xab },
+	{ STB0899_PCKLENUL		, 0x00 },
+	{ STB0899_PCKLENLL		, 0xcc },
+	{ STB0899_RSPCKLEN		, 0xcc },
+	{ STB0899_TSSTATUS		, 0x80 },
+	{ STB0899_ERRCTRL1		, 0xb6 },
+	{ STB0899_ERRCTRL2		, 0x96 },
+	{ STB0899_ERRCTRL3		, 0x89 },
+	{ STB0899_DMONMSK1		, 0x27 },
+	{ STB0899_DMONMSK0		, 0x03 },
+	{ STB0899_DEMAPVIT		, 0x5c },
+	{ STB0899_PLPARM		, 0x1f },
+	{ STB0899_PDELCTRL		, 0x48 },
+	{ STB0899_PDELCTRL2		, 0x00 },
+	{ STB0899_BBHCTRL1		, 0x00 },
+	{ STB0899_BBHCTRL2		, 0x00 },
+	{ STB0899_HYSTTHRESH		, 0x77 },
+	{ STB0899_MATCSTM		, 0x00 },
+	{ STB0899_MATCSTL		, 0x00 },
+	{ STB0899_UPLCSTM		, 0x00 },
+	{ STB0899_UPLCSTL		, 0x00 },
+	{ STB0899_DFLCSTM		, 0x00 },
+	{ STB0899_DFLCSTL		, 0x00 },
+	{ STB0899_SYNCCST		, 0x00 },
+	{ STB0899_SYNCDCSTM		, 0x00 },
+	{ STB0899_SYNCDCSTL		, 0x00 },
+	{ STB0899_ISI_ENTRY		, 0x00 },
+	{ STB0899_ISI_BIT_EN		, 0x00 },
+	{ STB0899_MATSTRM		, 0x00 },
+	{ STB0899_MATSTRL		, 0x00 },
+	{ STB0899_UPLSTRM		, 0x00 },
+	{ STB0899_UPLSTRL		, 0x00 },
+	{ STB0899_DFLSTRM		, 0x00 },
+	{ STB0899_DFLSTRL		, 0x00 },
+	{ STB0899_SYNCSTR		, 0x00 },
+	{ STB0899_SYNCDSTRM		, 0x00 },
+	{ STB0899_SYNCDSTRL		, 0x00 },
+	{ STB0899_CFGPDELSTATUS1	, 0x10 },
+	{ STB0899_CFGPDELSTATUS2	, 0x00 },
+	{ STB0899_BBFERRORM		, 0x00 },
+	{ STB0899_BBFERRORL		, 0x00 },
+	{ STB0899_UPKTERRORM		, 0x00 },
+	{ STB0899_UPKTERRORL		, 0x00 },
+	{ 0xffff			, 0xff },
+};
+
+static struct stb0899_config tt3200_config = {
+	.init_dev		= tt3200_stb0899_s1_init_1,
+	.init_s2_demod		= stb0899_s2_init_2,
+	.init_s1_demod		= tt3200_stb0899_s1_init_3,
+	.init_s2_fec		= stb0899_s2_init_4,
+	.init_tst		= stb0899_s1_init_5,
+
+	.postproc		= NULL,
+
+	.demod_address		= 0x68,
+
+	.xtal_freq		= 27000000,
+	.inversion		= IQ_SWAP_ON,
+
+	.lo_clk			= 76500000,
+	.hi_clk			= 99000000,
+
+	.esno_ave		= STB0899_DVBS2_ESNO_AVE,
+	.esno_quant		= STB0899_DVBS2_ESNO_QUANT,
+	.avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE,
+	.avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE,
+	.miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD,
+	.uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+	.uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+	.uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF,
+	.sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+	.btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS,
+	.btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+	.crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS,
+	.ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER,
+
+	.tuner_get_frequency	= stb6100_get_frequency,
+	.tuner_set_frequency	= stb6100_set_frequency,
+	.tuner_set_bandwidth	= stb6100_set_bandwidth,
+	.tuner_get_bandwidth	= stb6100_get_bandwidth,
+	.tuner_set_rfsiggain	= NULL
+};
+
+static struct stb6100_config tt3200_stb6100_config = {
+	.tuner_address	= 0x60,
+	.refclock	= 27000000,
+};
+
+static void frontend_init(struct budget_ci *budget_ci)
+{
+	switch (budget_ci->budget.dev->pci->subsystem_device) {
+	case 0x100c:		// Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059))
+		budget_ci->budget.dvb_frontend =
+			dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap);
+		if (budget_ci->budget.dvb_frontend) {
+			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
+			budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
+			break;
+		}
+		break;
+
+	case 0x100f:		// Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059))
+		budget_ci->budget.dvb_frontend =
+			dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap);
+		if (budget_ci->budget.dvb_frontend) {
+			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params;
+			break;
+		}
+		break;
+
+	case 0x1010:		// TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt))
+		budget_ci->tuner_pll_address = 0x61;
+		budget_ci->budget.dvb_frontend =
+			dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
+		if (budget_ci->budget.dvb_frontend) {
+			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params;
+			break;
+		}
+		break;
+
+	case 0x1011:		// Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889)
+		budget_ci->tuner_pll_address = 0x63;
+		budget_ci->budget.dvb_frontend =
+			dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
+		if (budget_ci->budget.dvb_frontend) {
+			budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
+			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
+			break;
+		}
+		break;
+
+	case 0x1012:		// TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
+		budget_ci->tuner_pll_address = 0x60;
+		budget_ci->budget.dvb_frontend =
+			dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap);
+		if (budget_ci->budget.dvb_frontend) {
+			budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init;
+			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params;
+			break;
+		}
+		break;
+
+	case 0x1017:		// TT S-1500 PCI
+		budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap);
+		if (budget_ci->budget.dvb_frontend) {
+			budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
+			budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap;
+
+			budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+			if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) {
+				printk("%s: No LNBP21 found!\n", __func__);
+				dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+				budget_ci->budget.dvb_frontend = NULL;
+			}
+		}
+		break;
+
+	case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */
+		budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48);
+		if (budget_ci->budget.dvb_frontend) {
+			if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) {
+				printk(KERN_ERR "%s: No tda827x found!\n", __func__);
+				dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+				budget_ci->budget.dvb_frontend = NULL;
+			}
+		}
+		break;
+
+	case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */
+		budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap);
+		if (budget_ci->budget.dvb_frontend) {
+			if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) {
+				if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
+					printk(KERN_ERR "%s: No LNBP21 found!\n", __func__);
+					dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+					budget_ci->budget.dvb_frontend = NULL;
+				}
+			} else {
+				printk(KERN_ERR "%s: No STB6000 found!\n", __func__);
+				dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+				budget_ci->budget.dvb_frontend = NULL;
+			}
+		}
+		break;
+
+	case 0x1019:		// TT S2-3200 PCI
+		/*
+		 * NOTE! on some STB0899 versions, the internal PLL takes a longer time
+		 * to settle, aka LOCK. On the older revisions of the chip, we don't see
+		 * this, as a result on the newer chips the entire clock tree, will not
+		 * be stable after a freshly POWER 'ed up situation.
+		 * In this case, we should RESET the STB0899 (Active LOW) and wait for
+		 * PLL stabilization.
+		 *
+		 * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is
+		 * connected to the SAA7146 GPIO, GPIO2, Pin 142
+		 */
+		/* Reset Demodulator */
+		saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO);
+		/* Wait for everything to die */
+		msleep(50);
+		/* Pull it up out of Reset state */
+		saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI);
+		/* Wait for PLL to stabilize */
+		msleep(250);
+		/*
+		 * PLL state should be stable now. Ideally, we should check
+		 * for PLL LOCK status. But well, never mind!
+		 */
+		budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap);
+		if (budget_ci->budget.dvb_frontend) {
+			if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) {
+				if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) {
+					printk("%s: No LNBP21 found!\n", __func__);
+					dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+					budget_ci->budget.dvb_frontend = NULL;
+				}
+			} else {
+					dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+					budget_ci->budget.dvb_frontend = NULL;
+			}
+		}
+		break;
+
+	}
+
+	if (budget_ci->budget.dvb_frontend == NULL) {
+		printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+		       budget_ci->budget.dev->pci->vendor,
+		       budget_ci->budget.dev->pci->device,
+		       budget_ci->budget.dev->pci->subsystem_vendor,
+		       budget_ci->budget.dev->pci->subsystem_device);
+	} else {
+		if (dvb_register_frontend
+		    (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) {
+			printk("budget-ci: Frontend registration failed!\n");
+			dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+			budget_ci->budget.dvb_frontend = NULL;
+		}
+	}
+}
+
+static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
+{
+	struct budget_ci *budget_ci;
+	int err;
+
+	budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL);
+	if (!budget_ci) {
+		err = -ENOMEM;
+		goto out1;
+	}
+
+	dprintk(2, "budget_ci: %p\n", budget_ci);
+
+	dev->ext_priv = budget_ci;
+
+	err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE,
+				adapter_nr);
+	if (err)
+		goto out2;
+
+	err = msp430_ir_init(budget_ci);
+	if (err)
+		goto out3;
+
+	ciintf_init(budget_ci);
+
+	budget_ci->budget.dvb_adapter.priv = budget_ci;
+	frontend_init(budget_ci);
+
+	ttpci_budget_init_hooks(&budget_ci->budget);
+
+	return 0;
+
+out3:
+	ttpci_budget_deinit(&budget_ci->budget);
+out2:
+	kfree(budget_ci);
+out1:
+	return err;
+}
+
+static int budget_ci_detach(struct saa7146_dev *dev)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv;
+	struct saa7146_dev *saa = budget_ci->budget.dev;
+	int err;
+
+	if (budget_ci->budget.ci_present)
+		ciintf_deinit(budget_ci);
+	msp430_ir_deinit(budget_ci);
+	if (budget_ci->budget.dvb_frontend) {
+		dvb_unregister_frontend(budget_ci->budget.dvb_frontend);
+		dvb_frontend_detach(budget_ci->budget.dvb_frontend);
+	}
+	err = ttpci_budget_deinit(&budget_ci->budget);
+
+	// disable frontend and CI interface
+	saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
+
+	kfree(budget_ci);
+
+	return err;
+}
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC);
+MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T	 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT);
+
+static const struct pci_device_id pci_tbl[] = {
+	MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
+	MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f),
+	MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010),
+	MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
+	MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
+	MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
+	MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a),
+	MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019),
+	MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b),
+	{
+	 .vendor = 0,
+	 }
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_extension budget_extension = {
+	.name = "budget_ci dvb",
+	.flags = SAA7146_USE_I2C_IRQ,
+
+	.module = THIS_MODULE,
+	.pci_tbl = &pci_tbl[0],
+	.attach = budget_ci_attach,
+	.detach = budget_ci_detach,
+
+	.irq_mask = MASK_03 | MASK_06 | MASK_10,
+	.irq_func = budget_ci_irq,
+};
+
+static int __init budget_ci_init(void)
+{
+	return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_ci_exit(void)
+{
+	saa7146_unregister_extension(&budget_extension);
+}
+
+module_init(budget_ci_init);
+module_exit(budget_ci_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards w/ CI-module produced by Siemens, Technotrend, Hauppauge");
diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget-core.c b/drivers/staging/media/deprecated/saa7146/ttpci/budget-core.c
new file mode 100644
index 000000000000..5d5796f24469
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/ttpci/budget-core.c
@@ -0,0 +1,603 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * budget-core.c: driver for the SAA7146 based Budget DVB cards
+ *
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph  Metzler
+ *			 & Marcus Metzler for convergence integrated media GmbH
+ *
+ * 26feb2004 Support for FS Activy Card (Grundig tuner) by
+ *	     Michael Dreher <michael@5dot1.de>,
+ *	     Oliver Endriss <o.endriss@gmx.de>,
+ *	     Andreas 'randy' Weinberger
+ *
+ * the project's page is at https://linuxtv.org
+ */
+
+
+#include "budget.h"
+#include "ttpci-eeprom.h"
+
+#define TS_WIDTH		(2 * TS_SIZE)
+#define TS_WIDTH_ACTIVY		TS_SIZE
+#define TS_WIDTH_DVBC		TS_SIZE
+#define TS_HEIGHT_MASK		0xf00
+#define TS_HEIGHT_MASK_ACTIVY	0xc00
+#define TS_HEIGHT_MASK_DVBC	0xe00
+#define TS_MIN_BUFSIZE_K	188
+#define TS_MAX_BUFSIZE_K	1410
+#define TS_MAX_BUFSIZE_K_ACTIVY	564
+#define TS_MAX_BUFSIZE_K_DVBC	1316
+#define BUFFER_WARNING_WAIT	(30*HZ)
+
+int budget_debug;
+static int dma_buffer_size = TS_MIN_BUFSIZE_K;
+module_param_named(debug, budget_debug, int, 0644);
+module_param_named(bufsize, dma_buffer_size, int, 0444);
+MODULE_PARM_DESC(debug, "Turn on/off budget debugging (default:off).");
+MODULE_PARM_DESC(bufsize, "DMA buffer size in KB, default: 188, min: 188, max: 1410 (Activy: 564)");
+
+/****************************************************************************
+ * TT budget / WinTV Nova
+ ****************************************************************************/
+
+static int stop_ts_capture(struct budget *budget)
+{
+	dprintk(2, "budget: %p\n", budget);
+
+	saa7146_write(budget->dev, MC1, MASK_20);	// DMA3 off
+	SAA7146_IER_DISABLE(budget->dev, MASK_10);
+	return 0;
+}
+
+static int start_ts_capture(struct budget *budget)
+{
+	struct saa7146_dev *dev = budget->dev;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	if (!budget->feeding || !budget->fe_synced)
+		return 0;
+
+	saa7146_write(dev, MC1, MASK_20);	// DMA3 off
+
+	memset(budget->grabbing, 0x00, budget->buffer_size);
+
+	saa7146_write(dev, PCI_BT_V1, 0x001c0000 | (saa7146_read(dev, PCI_BT_V1) & ~0x001f0000));
+
+	budget->ttbp = 0;
+
+	/*
+	 *  Signal path on the Activy:
+	 *
+	 *  tuner -> SAA7146 port A -> SAA7146 BRS -> SAA7146 DMA3 -> memory
+	 *
+	 *  Since the tuner feeds 204 bytes packets into the SAA7146,
+	 *  DMA3 is configured to strip the trailing 16 FEC bytes:
+	 *      Pitch: 188, NumBytes3: 188, NumLines3: 1024
+	 */
+
+	switch(budget->card->type) {
+	case BUDGET_FS_ACTIVY:
+		saa7146_write(dev, DD1_INIT, 0x04000000);
+		saa7146_write(dev, MC2, (MASK_09 | MASK_25));
+		saa7146_write(dev, BRS_CTRL, 0x00000000);
+		break;
+	case BUDGET_PATCH:
+		saa7146_write(dev, DD1_INIT, 0x00000200);
+		saa7146_write(dev, MC2, (MASK_10 | MASK_26));
+		saa7146_write(dev, BRS_CTRL, 0x60000000);
+		break;
+	case BUDGET_CIN1200C_MK3:
+	case BUDGET_KNC1C_MK3:
+	case BUDGET_KNC1C_TDA10024:
+	case BUDGET_KNC1CP_MK3:
+		if (budget->video_port == BUDGET_VIDEO_PORTA) {
+			saa7146_write(dev, DD1_INIT, 0x06000200);
+			saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+			saa7146_write(dev, BRS_CTRL, 0x00000000);
+		} else {
+			saa7146_write(dev, DD1_INIT, 0x00000600);
+			saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+			saa7146_write(dev, BRS_CTRL, 0x60000000);
+		}
+		break;
+	default:
+		if (budget->video_port == BUDGET_VIDEO_PORTA) {
+			saa7146_write(dev, DD1_INIT, 0x06000200);
+			saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+			saa7146_write(dev, BRS_CTRL, 0x00000000);
+		} else {
+			saa7146_write(dev, DD1_INIT, 0x02000600);
+			saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+			saa7146_write(dev, BRS_CTRL, 0x60000000);
+		}
+	}
+
+	saa7146_write(dev, MC2, (MASK_08 | MASK_24));
+	mdelay(10);
+
+	saa7146_write(dev, BASE_ODD3, 0);
+	if (budget->buffer_size > budget->buffer_height * budget->buffer_width) {
+		// using odd/even buffers
+		saa7146_write(dev, BASE_EVEN3, budget->buffer_height * budget->buffer_width);
+	} else {
+		// using a single buffer
+		saa7146_write(dev, BASE_EVEN3, 0);
+	}
+	saa7146_write(dev, PROT_ADDR3, budget->buffer_size);
+	saa7146_write(dev, BASE_PAGE3, budget->pt.dma | ME1 | 0x90);
+
+	saa7146_write(dev, PITCH3, budget->buffer_width);
+	saa7146_write(dev, NUM_LINE_BYTE3,
+			(budget->buffer_height << 16) | budget->buffer_width);
+
+	saa7146_write(dev, MC2, (MASK_04 | MASK_20));
+
+	SAA7146_ISR_CLEAR(budget->dev, MASK_10);	/* VPE */
+	SAA7146_IER_ENABLE(budget->dev, MASK_10);	/* VPE */
+	saa7146_write(dev, MC1, (MASK_04 | MASK_20));	/* DMA3 on */
+
+	return 0;
+}
+
+static int budget_read_fe_status(struct dvb_frontend *fe,
+				 enum fe_status *status)
+{
+	struct budget *budget = (struct budget *) fe->dvb->priv;
+	int synced;
+	int ret;
+
+	if (budget->read_fe_status)
+		ret = budget->read_fe_status(fe, status);
+	else
+		ret = -EINVAL;
+
+	if (!ret) {
+		synced = (*status & FE_HAS_LOCK);
+		if (synced != budget->fe_synced) {
+			budget->fe_synced = synced;
+			spin_lock(&budget->feedlock);
+			if (synced)
+				start_ts_capture(budget);
+			else
+				stop_ts_capture(budget);
+			spin_unlock(&budget->feedlock);
+		}
+	}
+	return ret;
+}
+
+static void vpeirq(struct tasklet_struct *t)
+{
+	struct budget *budget = from_tasklet(budget, t, vpe_tasklet);
+	u8 *mem = (u8 *) (budget->grabbing);
+	u32 olddma = budget->ttbp;
+	u32 newdma = saa7146_read(budget->dev, PCI_VDP3);
+	u32 count;
+
+	/* Ensure streamed PCI data is synced to CPU */
+	dma_sync_sg_for_cpu(&budget->dev->pci->dev, budget->pt.slist,
+			    budget->pt.nents, DMA_FROM_DEVICE);
+
+	/* nearest lower position divisible by 188 */
+	newdma -= newdma % 188;
+
+	if (newdma >= budget->buffer_size)
+		return;
+
+	budget->ttbp = newdma;
+
+	if (budget->feeding == 0 || newdma == olddma)
+		return;
+
+	if (newdma > olddma) {	/* no wraparound, dump olddma..newdma */
+		count = newdma - olddma;
+		dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188);
+	} else {		/* wraparound, dump olddma..buflen and 0..newdma */
+		count = budget->buffer_size - olddma;
+		dvb_dmx_swfilter_packets(&budget->demux, mem + olddma, count / 188);
+		count += newdma;
+		dvb_dmx_swfilter_packets(&budget->demux, mem, newdma / 188);
+	}
+
+	if (count > budget->buffer_warning_threshold)
+		budget->buffer_warnings++;
+
+	if (budget->buffer_warnings && time_after(jiffies, budget->buffer_warning_time)) {
+		printk("%s %s: used %d times >80%% of buffer (%u bytes now)\n",
+			budget->dev->name, __func__, budget->buffer_warnings, count);
+		budget->buffer_warning_time = jiffies + BUFFER_WARNING_WAIT;
+		budget->buffer_warnings = 0;
+	}
+}
+
+
+static int ttpci_budget_debiread_nolock(struct budget *budget, u32 config,
+		int addr, int count, int nobusyloop)
+{
+	struct saa7146_dev *saa = budget->dev;
+	int result;
+
+	result = saa7146_wait_for_debi_done(saa, nobusyloop);
+	if (result < 0)
+		return result;
+
+	saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x10000 | (addr & 0xffff));
+	saa7146_write(saa, DEBI_CONFIG, config);
+	saa7146_write(saa, DEBI_PAGE, 0);
+	saa7146_write(saa, MC2, (2 << 16) | 2);
+
+	result = saa7146_wait_for_debi_done(saa, nobusyloop);
+	if (result < 0)
+		return result;
+
+	result = saa7146_read(saa, DEBI_AD);
+	result &= (0xffffffffUL >> ((4 - count) * 8));
+	return result;
+}
+
+int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count,
+			  int uselocks, int nobusyloop)
+{
+	if (count > 4 || count <= 0)
+		return 0;
+
+	if (uselocks) {
+		unsigned long flags;
+		int result;
+
+		spin_lock_irqsave(&budget->debilock, flags);
+		result = ttpci_budget_debiread_nolock(budget, config, addr,
+						      count, nobusyloop);
+		spin_unlock_irqrestore(&budget->debilock, flags);
+		return result;
+	}
+	return ttpci_budget_debiread_nolock(budget, config, addr,
+					    count, nobusyloop);
+}
+
+static int ttpci_budget_debiwrite_nolock(struct budget *budget, u32 config,
+		int addr, int count, u32 value, int nobusyloop)
+{
+	struct saa7146_dev *saa = budget->dev;
+	int result;
+
+	result = saa7146_wait_for_debi_done(saa, nobusyloop);
+	if (result < 0)
+		return result;
+
+	saa7146_write(saa, DEBI_COMMAND, (count << 17) | 0x00000 | (addr & 0xffff));
+	saa7146_write(saa, DEBI_CONFIG, config);
+	saa7146_write(saa, DEBI_PAGE, 0);
+	saa7146_write(saa, DEBI_AD, value);
+	saa7146_write(saa, MC2, (2 << 16) | 2);
+
+	result = saa7146_wait_for_debi_done(saa, nobusyloop);
+	return result < 0 ? result : 0;
+}
+
+int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr,
+			   int count, u32 value, int uselocks, int nobusyloop)
+{
+	if (count > 4 || count <= 0)
+		return 0;
+
+	if (uselocks) {
+		unsigned long flags;
+		int result;
+
+		spin_lock_irqsave(&budget->debilock, flags);
+		result = ttpci_budget_debiwrite_nolock(budget, config, addr,
+						count, value, nobusyloop);
+		spin_unlock_irqrestore(&budget->debilock, flags);
+		return result;
+	}
+	return ttpci_budget_debiwrite_nolock(budget, config, addr,
+					     count, value, nobusyloop);
+}
+
+
+/****************************************************************************
+ * DVB API SECTION
+ ****************************************************************************/
+
+static int budget_start_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct budget *budget = (struct budget *) demux->priv;
+	int status = 0;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	if (!demux->dmx.frontend)
+		return -EINVAL;
+
+	spin_lock(&budget->feedlock);
+	feed->pusi_seen = false; /* have a clean section start */
+	if (budget->feeding++ == 0)
+		status = start_ts_capture(budget);
+	spin_unlock(&budget->feedlock);
+	return status;
+}
+
+static int budget_stop_feed(struct dvb_demux_feed *feed)
+{
+	struct dvb_demux *demux = feed->demux;
+	struct budget *budget = (struct budget *) demux->priv;
+	int status = 0;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	spin_lock(&budget->feedlock);
+	if (--budget->feeding == 0)
+		status = stop_ts_capture(budget);
+	spin_unlock(&budget->feedlock);
+	return status;
+}
+
+static int budget_register(struct budget *budget)
+{
+	struct dvb_demux *dvbdemux = &budget->demux;
+	int ret;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	dvbdemux->priv = (void *) budget;
+
+	dvbdemux->filternum = 256;
+	dvbdemux->feednum = 256;
+	dvbdemux->start_feed = budget_start_feed;
+	dvbdemux->stop_feed = budget_stop_feed;
+	dvbdemux->write_to_decoder = NULL;
+
+	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING |
+				      DMX_MEMORY_BASED_FILTERING);
+
+	dvb_dmx_init(&budget->demux);
+
+	budget->dmxdev.filternum = 256;
+	budget->dmxdev.demux = &dvbdemux->dmx;
+	budget->dmxdev.capabilities = 0;
+
+	dvb_dmxdev_init(&budget->dmxdev, &budget->dvb_adapter);
+
+	budget->hw_frontend.source = DMX_FRONTEND_0;
+
+	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->hw_frontend);
+
+	if (ret < 0)
+		goto err_release_dmx;
+
+	budget->mem_frontend.source = DMX_MEMORY_FE;
+	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->mem_frontend);
+	if (ret < 0)
+		goto err_release_dmx;
+
+	ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, &budget->hw_frontend);
+	if (ret < 0)
+		goto err_release_dmx;
+
+	dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx);
+
+	return 0;
+
+err_release_dmx:
+	dvb_dmxdev_release(&budget->dmxdev);
+	dvb_dmx_release(&budget->demux);
+	return ret;
+}
+
+static void budget_unregister(struct budget *budget)
+{
+	struct dvb_demux *dvbdemux = &budget->demux;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	dvb_net_release(&budget->dvb_net);
+
+	dvbdemux->dmx.close(&dvbdemux->dmx);
+	dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->hw_frontend);
+	dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &budget->mem_frontend);
+
+	dvb_dmxdev_release(&budget->dmxdev);
+	dvb_dmx_release(&budget->demux);
+}
+
+int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev,
+		      struct saa7146_pci_extension_data *info,
+		      struct module *owner, short *adapter_nums)
+{
+	int ret = 0;
+	struct budget_info *bi = info->ext_priv;
+	int max_bufsize;
+	int height_mask;
+
+	memset(budget, 0, sizeof(struct budget));
+
+	dprintk(2, "dev: %p, budget: %p\n", dev, budget);
+
+	budget->card = bi;
+	budget->dev = (struct saa7146_dev *) dev;
+
+	switch(budget->card->type) {
+	case BUDGET_FS_ACTIVY:
+		budget->buffer_width = TS_WIDTH_ACTIVY;
+		max_bufsize = TS_MAX_BUFSIZE_K_ACTIVY;
+		height_mask = TS_HEIGHT_MASK_ACTIVY;
+		break;
+
+	case BUDGET_KNC1C:
+	case BUDGET_KNC1CP:
+	case BUDGET_CIN1200C:
+	case BUDGET_KNC1C_MK3:
+	case BUDGET_KNC1C_TDA10024:
+	case BUDGET_KNC1CP_MK3:
+	case BUDGET_CIN1200C_MK3:
+		budget->buffer_width = TS_WIDTH_DVBC;
+		max_bufsize = TS_MAX_BUFSIZE_K_DVBC;
+		height_mask = TS_HEIGHT_MASK_DVBC;
+		break;
+
+	default:
+		budget->buffer_width = TS_WIDTH;
+		max_bufsize = TS_MAX_BUFSIZE_K;
+		height_mask = TS_HEIGHT_MASK;
+	}
+
+	if (dma_buffer_size < TS_MIN_BUFSIZE_K)
+		dma_buffer_size = TS_MIN_BUFSIZE_K;
+	else if (dma_buffer_size > max_bufsize)
+		dma_buffer_size = max_bufsize;
+
+	budget->buffer_height = dma_buffer_size * 1024 / budget->buffer_width;
+	if (budget->buffer_height > 0xfff) {
+		budget->buffer_height /= 2;
+		budget->buffer_height &= height_mask;
+		budget->buffer_size = 2 * budget->buffer_height * budget->buffer_width;
+	} else {
+		budget->buffer_height &= height_mask;
+		budget->buffer_size = budget->buffer_height * budget->buffer_width;
+	}
+	budget->buffer_warning_threshold = budget->buffer_size * 80/100;
+	budget->buffer_warnings = 0;
+	budget->buffer_warning_time = jiffies;
+
+	dprintk(2, "%s: buffer type = %s, width = %d, height = %d\n",
+		budget->dev->name,
+		budget->buffer_size > budget->buffer_width * budget->buffer_height ? "odd/even" : "single",
+		budget->buffer_width, budget->buffer_height);
+	printk("%s: dma buffer size %u\n", budget->dev->name, budget->buffer_size);
+
+	ret = dvb_register_adapter(&budget->dvb_adapter, budget->card->name,
+				   owner, &budget->dev->pci->dev, adapter_nums);
+	if (ret < 0)
+		return ret;
+
+	/* set dd1 stream a & b */
+	saa7146_write(dev, DD1_STREAM_B, 0x00000000);
+	saa7146_write(dev, MC2, (MASK_09 | MASK_25));
+	saa7146_write(dev, MC2, (MASK_10 | MASK_26));
+	saa7146_write(dev, DD1_INIT, 0x02000000);
+	saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26));
+
+	if (bi->type != BUDGET_FS_ACTIVY)
+		budget->video_port = BUDGET_VIDEO_PORTB;
+	else
+		budget->video_port = BUDGET_VIDEO_PORTA;
+	spin_lock_init(&budget->feedlock);
+	spin_lock_init(&budget->debilock);
+
+	/* the Siemens DVB needs this if you want to have the i2c chips
+	   get recognized before the main driver is loaded */
+	if (bi->type != BUDGET_FS_ACTIVY)
+		saa7146_write(dev, GPIO_CTRL, 0x500000);	/* GPIO 3 = 1 */
+
+	strscpy(budget->i2c_adap.name, budget->card->name,
+		sizeof(budget->i2c_adap.name));
+
+	saa7146_i2c_adapter_prepare(dev, &budget->i2c_adap, SAA7146_I2C_BUS_BIT_RATE_120);
+	strscpy(budget->i2c_adap.name, budget->card->name,
+		sizeof(budget->i2c_adap.name));
+
+	if (i2c_add_adapter(&budget->i2c_adap) < 0) {
+		ret = -ENOMEM;
+		goto err_dvb_unregister;
+	}
+
+	ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac);
+
+	budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, budget->buffer_size, &budget->pt);
+	if (NULL == budget->grabbing) {
+		ret = -ENOMEM;
+		goto err_del_i2c;
+	}
+
+	saa7146_write(dev, PCI_BT_V1, 0x001c0000);
+	/* upload all */
+	saa7146_write(dev, GPIO_CTRL, 0x000000);
+
+	tasklet_setup(&budget->vpe_tasklet, vpeirq);
+
+	/* frontend power on */
+	if (bi->type != BUDGET_FS_ACTIVY)
+		saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
+
+	if ((ret = budget_register(budget)) == 0)
+		return 0; /* Everything OK */
+
+	/* An error occurred, cleanup resources */
+	saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt);
+
+err_del_i2c:
+	i2c_del_adapter(&budget->i2c_adap);
+
+err_dvb_unregister:
+	dvb_unregister_adapter(&budget->dvb_adapter);
+
+	return ret;
+}
+
+void ttpci_budget_init_hooks(struct budget *budget)
+{
+	if (budget->dvb_frontend && !budget->read_fe_status) {
+		budget->read_fe_status = budget->dvb_frontend->ops.read_status;
+		budget->dvb_frontend->ops.read_status = budget_read_fe_status;
+	}
+}
+
+int ttpci_budget_deinit(struct budget *budget)
+{
+	struct saa7146_dev *dev = budget->dev;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	budget_unregister(budget);
+
+	tasklet_kill(&budget->vpe_tasklet);
+
+	saa7146_vfree_destroy_pgtable(dev->pci, budget->grabbing, &budget->pt);
+
+	i2c_del_adapter(&budget->i2c_adap);
+
+	dvb_unregister_adapter(&budget->dvb_adapter);
+
+	return 0;
+}
+
+void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr)
+{
+	struct budget *budget = (struct budget *) dev->ext_priv;
+
+	dprintk(8, "dev: %p, budget: %p\n", dev, budget);
+
+	if (*isr & MASK_10)
+		tasklet_schedule(&budget->vpe_tasklet);
+}
+
+void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port)
+{
+	struct budget *budget = (struct budget *) dev->ext_priv;
+
+	spin_lock(&budget->feedlock);
+	budget->video_port = video_port;
+	if (budget->feeding) {
+		stop_ts_capture(budget);
+		start_ts_capture(budget);
+	}
+	spin_unlock(&budget->feedlock);
+}
+
+EXPORT_SYMBOL_GPL(ttpci_budget_debiread);
+EXPORT_SYMBOL_GPL(ttpci_budget_debiwrite);
+EXPORT_SYMBOL_GPL(ttpci_budget_init);
+EXPORT_SYMBOL_GPL(ttpci_budget_init_hooks);
+EXPORT_SYMBOL_GPL(ttpci_budget_deinit);
+EXPORT_SYMBOL_GPL(ttpci_budget_irq10_handler);
+EXPORT_SYMBOL_GPL(ttpci_budget_set_video_port);
+EXPORT_SYMBOL_GPL(budget_debug);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget.c b/drivers/staging/media/deprecated/saa7146/ttpci/budget.c
new file mode 100644
index 000000000000..a88711a3ac7f
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/ttpci/budget.c
@@ -0,0 +1,883 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * budget.c: driver for the SAA7146 based Budget DVB cards
+ *
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph  Metzler
+ *                       & Marcus Metzler for convergence integrated media GmbH
+ *
+ * 26feb2004 Support for FS Activy Card (Grundig tuner) by
+ *           Michael Dreher <michael@5dot1.de>,
+ *           Oliver Endriss <o.endriss@gmx.de> and
+ *           Andreas 'randy' Weinberger
+ *
+ * the project's page is at https://linuxtv.org
+ */
+
+#include "budget.h"
+#include "stv0299.h"
+#include "ves1x93.h"
+#include "ves1820.h"
+#include "l64781.h"
+#include "tda8083.h"
+#include "s5h1420.h"
+#include "tda10086.h"
+#include "tda826x.h"
+#include "lnbp21.h"
+#include "bsru6.h"
+#include "bsbe1.h"
+#include "tdhd1.h"
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "isl6423.h"
+#include "lnbh24.h"
+
+
+static int diseqc_method;
+module_param(diseqc_method, int, 0444);
+MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static void Set22K (struct budget *budget, int state)
+{
+	struct saa7146_dev *dev=budget->dev;
+	dprintk(2, "budget: %p\n", budget);
+	saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
+}
+
+/* Diseqc functions only for TT Budget card */
+/* taken from the Skyvision DVB driver by
+   Ralph Metzler <rjkm@metzlerbros.de> */
+
+static void DiseqcSendBit (struct budget *budget, int data)
+{
+	struct saa7146_dev *dev=budget->dev;
+	dprintk(2, "budget: %p\n", budget);
+
+	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+	udelay(data ? 500 : 1000);
+	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+	udelay(data ? 1000 : 500);
+}
+
+static void DiseqcSendByte (struct budget *budget, int data)
+{
+	int i, par=1, d;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	for (i=7; i>=0; i--) {
+		d = (data>>i)&1;
+		par ^= d;
+		DiseqcSendBit(budget, d);
+	}
+
+	DiseqcSendBit(budget, par);
+}
+
+static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
+{
+	struct saa7146_dev *dev=budget->dev;
+	int i;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+	mdelay(16);
+
+	for (i=0; i<len; i++)
+		DiseqcSendByte(budget, msg[i]);
+
+	mdelay(16);
+
+	if (burst!=-1) {
+		if (burst)
+			DiseqcSendByte(budget, 0xff);
+		else {
+			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
+			mdelay(12);
+			udelay(500);
+			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
+		}
+		msleep(20);
+	}
+
+	return 0;
+}
+
+/*
+ *   Routines for the Fujitsu Siemens Activy budget card
+ *   22 kHz tone and DiSEqC are handled by the frontend.
+ *   Voltage must be set here.
+ *   GPIO 1: LNBP EN, GPIO 2: LNBP VSEL
+ */
+static int SetVoltage_Activy(struct budget *budget,
+			     enum fe_sec_voltage voltage)
+{
+	struct saa7146_dev *dev=budget->dev;
+
+	dprintk(2, "budget: %p\n", budget);
+
+	switch (voltage) {
+		case SEC_VOLTAGE_13:
+			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
+			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
+			break;
+		case SEC_VOLTAGE_18:
+			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
+			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
+			break;
+		case SEC_VOLTAGE_OFF:
+			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO);
+			break;
+		default:
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int siemens_budget_set_voltage(struct dvb_frontend *fe,
+				      enum fe_sec_voltage voltage)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+
+	return SetVoltage_Activy (budget, voltage);
+}
+
+static int budget_set_tone(struct dvb_frontend *fe,
+			   enum fe_sec_tone_mode tone)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+
+	switch (tone) {
+	case SEC_TONE_ON:
+		Set22K (budget, 1);
+		break;
+
+	case SEC_TONE_OFF:
+		Set22K (budget, 0);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+
+	SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
+
+	return 0;
+}
+
+static int budget_diseqc_send_burst(struct dvb_frontend *fe,
+				    enum fe_sec_mini_cmd minicmd)
+{
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+
+	SendDiSEqCMsg (budget, 0, NULL, minicmd);
+
+	return 0;
+}
+
+static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+	u8 pwr = 0;
+	u8 buf[4];
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+	u32 div = (c->frequency + 479500) / 125;
+
+	if (c->frequency > 2000000)
+		pwr = 3;
+	else if (c->frequency > 1800000)
+		pwr = 2;
+	else if (c->frequency > 1600000)
+		pwr = 1;
+	else if (c->frequency > 1200000)
+		pwr = 0;
+	else if (c->frequency >= 1100000)
+		pwr = 1;
+	else pwr = 2;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = ((div & 0x18000) >> 10) | 0x95;
+	buf[3] = (pwr << 6) | 0x30;
+
+	// NOTE: since we're using a prescaler of 2, we set the
+	// divisor frequency to 62.5kHz and divide by 125 above
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
+}
+
+static struct ves1x93_config alps_bsrv2_config =
+{
+	.demod_address = 0x08,
+	.xin = 90100000UL,
+	.invert_pwm = 0,
+};
+
+static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+	u32 div;
+	u8 data[4];
+	struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	div = (c->frequency + 35937500 + 31250) / 62500;
+
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x85 | ((div >> 10) & 0x60);
+	data[3] = (c->frequency < 174000000 ? 0x88 : c->frequency < 470000000 ? 0x84 : 0x81);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
+}
+
+static struct ves1820_config alps_tdbe2_config = {
+	.demod_address = 0x09,
+	.xin = 57840000UL,
+	.invert = 1,
+	.selagc = VES1820_SELAGC_SIGNAMPERR,
+};
+
+static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct budget *budget = fe->dvb->priv;
+	u8 *tuner_addr = fe->tuner_priv;
+	u32 div;
+	u8 cfg, cpump, band_select;
+	u8 data[4];
+	struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) };
+
+	if (tuner_addr)
+		msg.addr = *tuner_addr;
+	else
+		msg.addr = 0x61;
+
+	div = (36125000 + c->frequency) / 166666;
+
+	cfg = 0x88;
+
+	if (c->frequency < 175000000)
+		cpump = 2;
+	else if (c->frequency < 390000000)
+		cpump = 1;
+	else if (c->frequency < 470000000)
+		cpump = 2;
+	else if (c->frequency < 750000000)
+		cpump = 1;
+	else
+		cpump = 3;
+
+	if (c->frequency < 175000000)
+		band_select = 0x0e;
+	else if (c->frequency < 470000000)
+		band_select = 0x05;
+	else
+		band_select = 0x03;
+
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = ((div >> 10) & 0x60) | cfg;
+	data[3] = (cpump << 6) | band_select;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
+}
+
+static struct l64781_config grundig_29504_401_config = {
+	.demod_address = 0x55,
+};
+
+static struct l64781_config grundig_29504_401_config_activy = {
+	.demod_address = 0x54,
+};
+
+static u8 tuner_address_grundig_29504_401_activy = 0x60;
+
+static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+	u32 div;
+	u8 data[4];
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	div = c->frequency / 125;
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x8e;
+	data[3] = 0x00;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+	return 0;
+}
+
+static struct tda8083_config grundig_29504_451_config = {
+	.demod_address = 0x68,
+};
+
+static int s5h1420_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct budget* budget = (struct budget*) fe->dvb->priv;
+	u32 div;
+	u8 data[4];
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	div = c->frequency / 1000;
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0xc2;
+
+	if (div < 1450)
+		data[3] = 0x00;
+	else if (div < 1850)
+		data[3] = 0x40;
+	else if (div < 2000)
+		data[3] = 0x80;
+	else
+		data[3] = 0xc0;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
+
+	return 0;
+}
+
+static struct s5h1420_config s5h1420_config = {
+	.demod_address = 0x53,
+	.invert = 1,
+	.cdclk_polarity = 1,
+};
+
+static struct tda10086_config tda10086_config = {
+	.demod_address = 0x0e,
+	.invert = 0,
+	.diseqc_tone = 1,
+	.xtal_freq = TDA10086_XTAL_16M,
+};
+
+static const struct stv0299_config alps_bsru6_config_activy = {
+	.demod_address = 0x68,
+	.inittab = alps_bsru6_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.op0_off = 1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = alps_bsru6_set_symbol_rate,
+};
+
+static const struct stv0299_config alps_bsbe1_config_activy = {
+	.demod_address = 0x68,
+	.inittab = alps_bsbe1_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.op0_off = 1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = alps_bsbe1_set_symbol_rate,
+};
+
+static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name)
+{
+	struct budget *budget = (struct budget *)fe->dvb->priv;
+
+	return request_firmware(fw, name, &budget->dev->pci->dev);
+}
+
+
+static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg)
+{
+	u8 val;
+	struct i2c_msg msg[] = {
+		{ .addr = adr, .flags = 0, .buf = &reg, .len = 1 },
+		{ .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
+	};
+
+	return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val;
+}
+
+static u8 read_pwm(struct budget* budget)
+{
+	u8 b = 0xff;
+	u8 pwm;
+	struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
+				 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
+
+	if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
+		pwm = 0x48;
+
+	return pwm;
+}
+
+static struct stv090x_config tt1600_stv090x_config = {
+	.device			= STV0903,
+	.demod_mode		= STV090x_SINGLE,
+	.clk_mode		= STV090x_CLK_EXT,
+
+	.xtal			= 13500000,
+	.address		= 0x68,
+
+	.ts1_mode		= STV090x_TSMODE_DVBCI,
+	.ts2_mode		= STV090x_TSMODE_SERIAL_CONTINUOUS,
+
+	.repeater_level		= STV090x_RPTLEVEL_16,
+
+	.tuner_init		= NULL,
+	.tuner_sleep		= NULL,
+	.tuner_set_mode		= NULL,
+	.tuner_set_frequency	= NULL,
+	.tuner_get_frequency	= NULL,
+	.tuner_set_bandwidth	= NULL,
+	.tuner_get_bandwidth	= NULL,
+	.tuner_set_bbgain	= NULL,
+	.tuner_get_bbgain	= NULL,
+	.tuner_set_refclk	= NULL,
+	.tuner_get_status	= NULL,
+};
+
+static struct stv6110x_config tt1600_stv6110x_config = {
+	.addr			= 0x60,
+	.refclk			= 27000000,
+	.clk_div		= 2,
+};
+
+static struct isl6423_config tt1600_isl6423_config = {
+	.current_max		= SEC_CURRENT_515m,
+	.curlim			= SEC_CURRENT_LIM_ON,
+	.mod_extern		= 1,
+	.addr			= 0x08,
+};
+
+static void frontend_init(struct budget *budget)
+{
+	(void)alps_bsbe1_config; /* avoid warning */
+
+	switch(budget->dev->pci->subsystem_device) {
+	case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
+	case 0x1013:
+		// try the ALPS BSRV2 first of all
+		budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
+			budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+			budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
+			budget->dvb_frontend->ops.set_tone = budget_set_tone;
+			break;
+		}
+
+		// try the ALPS BSRU6 now
+		budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
+			budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+			if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) {
+				budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+				budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
+				budget->dvb_frontend->ops.set_tone = budget_set_tone;
+			}
+			break;
+		}
+		break;
+
+	case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
+
+		budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params;
+			break;
+		}
+		break;
+
+	case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
+
+		budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
+			budget->dvb_frontend->tuner_priv = NULL;
+			break;
+		}
+		break;
+
+	case 0x4f52: /* Cards based on Philips Semi Sylt PCI ref. design */
+		budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			printk(KERN_INFO "budget: tuner ALPS BSRU6 in Philips Semi. Sylt detected\n");
+			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
+			budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+			break;
+		}
+		break;
+
+	case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */
+	{
+		int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67);
+
+		if (subtype < 0)
+			break;
+		/* fixme: find a better way to identify the card */
+		if (subtype < 0x36) {
+			/* assume ALPS BSRU6 */
+			budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap);
+			if (budget->dvb_frontend) {
+				printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n");
+				budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
+				budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+				budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
+				budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+				break;
+			}
+		} else {
+			/* assume ALPS BSBE1 */
+			/* reset tuner */
+			saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO);
+			msleep(50);
+			saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI);
+			msleep(250);
+			budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap);
+			if (budget->dvb_frontend) {
+				printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n");
+				budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
+				budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+				budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
+				budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+				break;
+			}
+		}
+		break;
+	}
+
+	case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
+		budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
+			budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
+			budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+		}
+		break;
+
+	case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */
+		budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params;
+			budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+		}
+		break;
+
+	case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */
+		budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap);
+		if (budget->dvb_frontend) {
+			budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy;
+			budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
+		}
+		break;
+
+	case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
+	{
+		struct dvb_frontend *fe;
+
+		fe = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap);
+		if (fe) {
+			fe->ops.tuner_ops.set_params = s5h1420_tuner_set_params;
+			budget->dvb_frontend = fe;
+			if (dvb_attach(lnbp21_attach, fe, &budget->i2c_adap,
+				       0, 0) == NULL) {
+				printk("%s: No LNBP21 found!\n", __func__);
+				goto error_out;
+			}
+			break;
+		}
+	}
+		fallthrough;
+	case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262)
+	{
+		struct dvb_frontend *fe;
+
+		// gpio2 is connected to CLB - reset it + leave it high
+		saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
+		msleep(1);
+		saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
+		msleep(1);
+
+		fe = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap);
+		if (fe) {
+			budget->dvb_frontend = fe;
+			if (dvb_attach(tda826x_attach, fe, 0x60,
+				       &budget->i2c_adap, 0) == NULL)
+				printk("%s: No tda826x found!\n", __func__);
+			if (dvb_attach(lnbp21_attach, fe,
+				       &budget->i2c_adap, 0, 0) == NULL) {
+				printk("%s: No LNBP21 found!\n", __func__);
+				goto error_out;
+			}
+			break;
+		}
+	}
+		fallthrough;
+
+	case 0x101c: { /* TT S2-1600 */
+			const struct stv6110x_devctl *ctl;
+			saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
+			msleep(50);
+			saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
+			msleep(250);
+
+			budget->dvb_frontend = dvb_attach(stv090x_attach,
+							  &tt1600_stv090x_config,
+							  &budget->i2c_adap,
+							  STV090x_DEMODULATOR_0);
+
+			if (budget->dvb_frontend) {
+
+				ctl = dvb_attach(stv6110x_attach,
+						 budget->dvb_frontend,
+						 &tt1600_stv6110x_config,
+						 &budget->i2c_adap);
+
+				if (ctl) {
+					tt1600_stv090x_config.tuner_init	  = ctl->tuner_init;
+					tt1600_stv090x_config.tuner_sleep	  = ctl->tuner_sleep;
+					tt1600_stv090x_config.tuner_set_mode	  = ctl->tuner_set_mode;
+					tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
+					tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
+					tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
+					tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
+					tt1600_stv090x_config.tuner_set_bbgain	  = ctl->tuner_set_bbgain;
+					tt1600_stv090x_config.tuner_get_bbgain	  = ctl->tuner_get_bbgain;
+					tt1600_stv090x_config.tuner_set_refclk	  = ctl->tuner_set_refclk;
+					tt1600_stv090x_config.tuner_get_status	  = ctl->tuner_get_status;
+
+					/* call the init function once to initialize
+					   tuner's clock output divider and demod's
+					   master clock */
+					if (budget->dvb_frontend->ops.init)
+						budget->dvb_frontend->ops.init(budget->dvb_frontend);
+
+					if (dvb_attach(isl6423_attach,
+						       budget->dvb_frontend,
+						       &budget->i2c_adap,
+						       &tt1600_isl6423_config) == NULL) {
+						printk(KERN_ERR "%s: No Intersil ISL6423 found!\n", __func__);
+						goto error_out;
+					}
+				} else {
+					printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__);
+					goto error_out;
+				}
+			}
+		}
+		break;
+
+	case 0x1020: { /* Omicom S2 */
+			const struct stv6110x_devctl *ctl;
+			saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
+			msleep(50);
+			saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
+			msleep(250);
+
+			budget->dvb_frontend = dvb_attach(stv090x_attach,
+							  &tt1600_stv090x_config,
+							  &budget->i2c_adap,
+							  STV090x_DEMODULATOR_0);
+
+			if (budget->dvb_frontend) {
+				printk(KERN_INFO "budget: Omicom S2 detected\n");
+
+				ctl = dvb_attach(stv6110x_attach,
+						 budget->dvb_frontend,
+						 &tt1600_stv6110x_config,
+						 &budget->i2c_adap);
+
+				if (ctl) {
+					tt1600_stv090x_config.tuner_init	  = ctl->tuner_init;
+					tt1600_stv090x_config.tuner_sleep	  = ctl->tuner_sleep;
+					tt1600_stv090x_config.tuner_set_mode	  = ctl->tuner_set_mode;
+					tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
+					tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
+					tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
+					tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
+					tt1600_stv090x_config.tuner_set_bbgain	  = ctl->tuner_set_bbgain;
+					tt1600_stv090x_config.tuner_get_bbgain	  = ctl->tuner_get_bbgain;
+					tt1600_stv090x_config.tuner_set_refclk	  = ctl->tuner_set_refclk;
+					tt1600_stv090x_config.tuner_get_status	  = ctl->tuner_get_status;
+
+					/* call the init function once to initialize
+					   tuner's clock output divider and demod's
+					   master clock */
+					if (budget->dvb_frontend->ops.init)
+						budget->dvb_frontend->ops.init(budget->dvb_frontend);
+
+					if (dvb_attach(lnbh24_attach,
+							budget->dvb_frontend,
+							&budget->i2c_adap,
+							LNBH24_PCL | LNBH24_TTX,
+							LNBH24_TEN, 0x14>>1) == NULL) {
+						printk(KERN_ERR
+						"No LNBH24 found!\n");
+						goto error_out;
+					}
+				} else {
+					printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__);
+					goto error_out;
+				}
+			}
+		}
+		break;
+	}
+
+	if (budget->dvb_frontend == NULL) {
+		printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
+		       budget->dev->pci->vendor,
+		       budget->dev->pci->device,
+		       budget->dev->pci->subsystem_vendor,
+		       budget->dev->pci->subsystem_device);
+	} else {
+		if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend))
+			goto error_out;
+	}
+	return;
+
+error_out:
+	printk("budget: Frontend registration failed!\n");
+	dvb_frontend_detach(budget->dvb_frontend);
+	budget->dvb_frontend = NULL;
+	return;
+}
+
+static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
+{
+	struct budget *budget = NULL;
+	int err;
+
+	budget = kmalloc(sizeof(struct budget), GFP_KERNEL);
+	if( NULL == budget ) {
+		return -ENOMEM;
+	}
+
+	dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);
+
+	dev->ext_priv = budget;
+
+	err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr);
+	if (err) {
+		printk("==> failed\n");
+		kfree (budget);
+		return err;
+	}
+
+	budget->dvb_adapter.priv = budget;
+	frontend_init(budget);
+
+	ttpci_budget_init_hooks(budget);
+
+	return 0;
+}
+
+static int budget_detach (struct saa7146_dev* dev)
+{
+	struct budget *budget = (struct budget*) dev->ext_priv;
+	int err;
+
+	if (budget->dvb_frontend) {
+		dvb_unregister_frontend(budget->dvb_frontend);
+		dvb_frontend_detach(budget->dvb_frontend);
+	}
+
+	err = ttpci_budget_deinit (budget);
+
+	kfree (budget);
+	dev->ext_priv = NULL;
+
+	return err;
+}
+
+static struct saa7146_extension budget_extension;
+
+MAKE_BUDGET_INFO(ttbs,	"TT-Budget/WinTV-NOVA-S  PCI",	BUDGET_TT);
+MAKE_BUDGET_INFO(ttbc,	"TT-Budget/WinTV-NOVA-C  PCI",	BUDGET_TT);
+MAKE_BUDGET_INFO(ttbt,	"TT-Budget/WinTV-NOVA-T  PCI",	BUDGET_TT);
+MAKE_BUDGET_INFO(satel,	"SATELCO Multimedia PCI",	BUDGET_TT_HW_DISEQC);
+MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
+MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
+MAKE_BUDGET_INFO(fsact,	 "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY);
+MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY);
+MAKE_BUDGET_INFO(omicom, "Omicom S2 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(sylt,   "Philips Semi Sylt PCI", BUDGET_TT_HW_DISEQC);
+
+static const struct pci_device_id pci_tbl[] = {
+	MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1003),
+	MAKE_EXTENSION_PCI(ttbc,  0x13c2, 0x1004),
+	MAKE_EXTENSION_PCI(ttbt,  0x13c2, 0x1005),
+	MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
+	MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1016),
+	MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018),
+	MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c),
+	MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
+	MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
+	MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60),
+	MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61),
+	MAKE_EXTENSION_PCI(omicom, 0x14c4, 0x1020),
+	MAKE_EXTENSION_PCI(sylt, 0x1131, 0x4f52),
+	{
+		.vendor    = 0,
+	}
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_extension budget_extension = {
+	.name		= "budget dvb",
+	.flags		= SAA7146_USE_I2C_IRQ,
+
+	.module		= THIS_MODULE,
+	.pci_tbl	= pci_tbl,
+	.attach		= budget_attach,
+	.detach		= budget_detach,
+
+	.irq_mask	= MASK_10,
+	.irq_func	= ttpci_budget_irq10_handler,
+};
+
+static int __init budget_init(void)
+{
+	return saa7146_register_extension(&budget_extension);
+}
+
+static void __exit budget_exit(void)
+{
+	saa7146_unregister_extension(&budget_extension);
+}
+
+module_init(budget_init);
+module_exit(budget_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards by Siemens, Technotrend, Hauppauge");
diff --git a/drivers/staging/media/deprecated/saa7146/ttpci/budget.h b/drivers/staging/media/deprecated/saa7146/ttpci/budget.h
new file mode 100644
index 000000000000..82cc0df492b3
--- /dev/null
+++ b/drivers/staging/media/deprecated/saa7146/ttpci/budget.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __BUDGET_DVB__
+#define __BUDGET_DVB__
+
+#include <media/dvb_frontend.h>
+#include <media/dvbdev.h>
+#include <media/demux.h>
+#include <media/dvb_demux.h>
+#include <media/dmxdev.h>
+#include <media/dvb_net.h>
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+
+#include "../common/saa7146.h"
+
+extern int budget_debug;
+
+#ifdef dprintk
+#undef dprintk
+#endif
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (level & budget_debug)					\
+		printk(KERN_DEBUG KBUILD_MODNAME ": %s(): " fmt,	\
+		       __func__, ##arg);				\
+} while (0)
+
+#define TS_SIZE        188
+
+struct budget_info {
+	char *name;
+	int type;
+};
+
+/* place to store all the necessary device information */
+struct budget {
+
+	/* devices */
+	struct dvb_device dvb_dev;
+	struct dvb_net dvb_net;
+
+	struct saa7146_dev *dev;
+
+	struct i2c_adapter i2c_adap;
+	struct budget_info *card;
+
+	unsigned char *grabbing;
+	struct saa7146_pgtable pt;
+
+	struct tasklet_struct fidb_tasklet;
+	struct tasklet_struct vpe_tasklet;
+
+	struct dmxdev dmxdev;
+	struct dvb_demux demux;
+
+	struct dmx_frontend hw_frontend;
+	struct dmx_frontend mem_frontend;
+
+	int ci_present;
+	int video_port;
+
+	u32 buffer_width;
+	u32 buffer_height;
+	u32 buffer_size;
+	u32 buffer_warning_threshold;
+	u32 buffer_warnings;
+	unsigned long buffer_warning_time;
+
+	u32 ttbp;
+	int feeding;
+
+	spinlock_t feedlock;
+
+	spinlock_t debilock;
+
+	struct dvb_adapter dvb_adapter;
+	struct dvb_frontend *dvb_frontend;
+	int (*read_fe_status)(struct dvb_frontend *fe, enum fe_status *status);
+	int fe_synced;
+
+	void *priv;
+};
+
+#define MAKE_BUDGET_INFO(x_var,x_name,x_type) \
+static struct budget_info x_var ## _info = { \
+	.name=x_name,	\
+	.type=x_type };	\
+static struct saa7146_pci_extension_data x_var = { \
+	.ext_priv = &x_var ## _info, \
+	.ext = &budget_extension };
+
+#define BUDGET_TT		   0
+#define BUDGET_TT_HW_DISEQC	   1
+#define BUDGET_PATCH		   3
+#define BUDGET_FS_ACTIVY	   4
+#define BUDGET_CIN1200S		   5
+#define BUDGET_CIN1200C		   6
+#define BUDGET_CIN1200T		   7
+#define BUDGET_KNC1S		   8
+#define BUDGET_KNC1C		   9
+#define BUDGET_KNC1T		   10
+#define BUDGET_KNC1SP		   11
+#define BUDGET_KNC1CP		   12
+#define BUDGET_KNC1TP		   13
+#define BUDGET_TVSTAR		   14
+#define BUDGET_CIN1200C_MK3	   15
+#define BUDGET_KNC1C_MK3	   16
+#define BUDGET_KNC1CP_MK3	   17
+#define BUDGET_KNC1S2              18
+#define BUDGET_KNC1C_TDA10024	   19
+
+#define BUDGET_VIDEO_PORTA         0
+#define BUDGET_VIDEO_PORTB         1
+
+extern int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev,
+			     struct saa7146_pci_extension_data *info,
+			     struct module *owner, short *adapter_nums);
+extern void ttpci_budget_init_hooks(struct budget *budget);
+extern int ttpci_budget_deinit(struct budget *budget);
+extern void ttpci_budget_irq10_handler(struct saa7146_dev *dev, u32 * isr);
+extern void ttpci_budget_set_video_port(struct saa7146_dev *dev, int video_port);
+extern int ttpci_budget_debiread(struct budget *budget, u32 config, int addr, int count,
+				 int uselocks, int nobusyloop);
+extern int ttpci_budget_debiwrite(struct budget *budget, u32 config, int addr, int count, u32 value,
+				  int uselocks, int nobusyloop);
+
+#endif