Staging: w35und: Rename wbhal_s.h to wbhal.h

This patch renames the wbhal_s.h header file to wbhal.h now that it contains
both structure and function definitions.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 525 insertions, 0 deletions

diff --git a/drivers/staging/winbond/wbhal.h b/drivers/staging/winbond/wbhal.h
new file mode 100644
index 000000000000..821a1b3f1301
--- /dev/null
+++ b/drivers/staging/winbond/wbhal.h
@@ -0,0 +1,525 @@
+#ifndef __WINBOND_WBHAL_S_H
+#define __WINBOND_WBHAL_S_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h> /* for ETH_ALEN */
+
+#define HAL_LED_SET_MASK	0x001c
+#define HAL_LED_SET_SHIFT	2
+
+/* supported RF type */
+#define RF_MAXIM_2825		0
+#define RF_MAXIM_2827		1
+#define RF_MAXIM_2828		2
+#define RF_MAXIM_2829		3
+#define RF_MAXIM_V1		15
+#define RF_AIROHA_2230		16
+#define RF_AIROHA_7230		17
+#define RF_AIROHA_2230S		18
+#define RF_WB_242		33
+#define RF_WB_242_1		34
+#define RF_DECIDE_BY_INF	255
+
+/*
+ * ----------------------------------------------------------------
+ * The follow define connect to upper layer
+ *	User must modify for connection between HAL and upper layer
+ * ----------------------------------------------------------------
+ */
+
+/*
+ * ==============================
+ * Common define
+ * ==============================
+ */
+/* Bit 5 */
+#define HAL_USB_MODE_BURST(_H)			(_H->SoftwareSet & 0x20)
+
+/* Scan interval */
+#define SCAN_MAX_CHNL_TIME			(50)
+
+/* For TxL2 Frame typr recognise */
+#define FRAME_TYPE_802_3_DATA			0
+#define FRAME_TYPE_802_11_MANAGEMENT		1
+#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE	2
+#define FRAME_TYPE_802_11_CONTROL		3
+#define FRAME_TYPE_802_11_DATA			4
+#define FRAME_TYPE_PROMISCUOUS			5
+
+/* The follow definition is used for convert the frame------------ */
+#define DOT_11_SEQUENCE_OFFSET			22 /* Sequence control offset */
+#define DOT_3_TYPE_OFFSET			12
+#define DOT_11_MAC_HEADER_SIZE			24
+#define DOT_11_SNAP_SIZE			6
+#define DOT_11_TYPE_OFFSET			30 /* The start offset of 802.11 Frame. Type encapsulation. */
+#define DEFAULT_SIFSTIME			10
+#define DEFAULT_FRAGMENT_THRESHOLD		2346 /* No fragment */
+#define DEFAULT_MSDU_LIFE_TIME			0xffff
+
+#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME		(144 + 48)
+#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME		(72 + 24)
+#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION	(16 + 4 + 6)
+#define Tsym						4
+
+/*  Frame Type of Bits (2, 3)----------------------------------- */
+#define MAC_TYPE_MANAGEMENT			0x00
+#define MAC_TYPE_CONTROL			0x04
+#define MAC_TYPE_DATA				0x08
+#define MASK_FRAGMENT_NUMBER			0x000F
+#define SEQUENCE_NUMBER_SHIFT			4
+
+#define  HAL_WOL_TYPE_WAKEUP_FRAME		0x01
+#define  HAL_WOL_TYPE_MAGIC_PACKET		0x02
+
+#define HAL_KEYTYPE_WEP40			0
+#define HAL_KEYTYPE_WEP104			1
+#define HAL_KEYTYPE_TKIP			2 /* 128 bit key */
+#define HAL_KEYTYPE_AES_CCMP			3 /* 128 bit key */
+
+/* For VM state */
+enum {
+	VM_STOP = 0,
+	VM_RUNNING,
+	VM_COMPLETED
+};
+
+/*
+ * ================================
+ * Normal Key table format
+ * ================================
+ */
+
+/* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */
+#define MAX_KEY_TABLE			24 /* 24 entry for storing key data */
+#define GROUP_KEY_START_INDEX		4
+#define MAPPING_KEY_START_INDEX		8
+
+/*
+ * =========================================
+ * Descriptor
+ * =========================================
+ */
+#define MAX_DESCRIPTOR_BUFFER_INDEX	8 /* Have to multiple of 2 */
+#define FLAG_ERROR_TX_MASK		0x000000bf
+#define FLAG_ERROR_RX_MASK		0x0000083f
+
+#define FLAG_BAND_RX_MASK		0x10000000 /* Bit 28 */
+
+struct R00_descriptor {
+	union {
+		u32	value;
+#ifdef _BIG_ENDIAN_
+		struct {
+			u32	R00_packet_or_buffer_status:1;
+			u32	R00_packet_in_fifo:1;
+			u32	R00_RESERVED:2;
+			u32	R00_receive_byte_count:12;
+			u32	R00_receive_time_index:16;
+		};
+#else
+		struct {
+			u32	R00_receive_time_index:16;
+			u32	R00_receive_byte_count:12;
+			u32	R00_RESERVED:2;
+			u32	R00_packet_in_fifo:1;
+			u32	R00_packet_or_buffer_status:1;
+		};
+#endif
+	};
+};
+
+struct T00_descriptor {
+	union {
+		u32	value;
+#ifdef _BIG_ENDIAN_
+		struct {
+			u32	T00_first_mpdu:1; /* for hardware use */
+			u32	T00_last_mpdu:1; /* for hardware use */
+			u32	T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */
+			u32	T00_IgnoreResult:1;/* The same mechanism with T00 setting. */
+			u32	T00_RESERVED_ID:2;/* 3 bit ID reserved */
+			u32	T00_tx_packet_id:4;
+			u32	T00_RESERVED:4;
+			u32	T00_header_length:6;
+			u32	T00_frame_length:12;
+		};
+#else
+		struct {
+			u32	T00_frame_length:12;
+			u32	T00_header_length:6;
+			u32	T00_RESERVED:4;
+			u32	T00_tx_packet_id:4;
+			u32	T00_RESERVED_ID:2; /* 3 bit ID reserved */
+			u32	T00_IgnoreResult:1; /* The same mechanism with T00 setting. */
+			u32	T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */
+			u32	T00_last_mpdu:1; /* for hardware use */
+			u32	T00_first_mpdu:1; /* for hardware use */
+		};
+#endif
+	};
+};
+
+struct R01_descriptor {
+	union {
+		u32	value;
+#ifdef _BIG_ENDIAN_
+		struct {
+			u32	R01_RESERVED:3;
+			u32	R01_mod_type:1;
+			u32	R01_pre_type:1;
+			u32	R01_data_rate:3;
+			u32	R01_AGC_state:8;
+			u32	R01_LNA_state:2;
+			u32	R01_decryption_method:2;
+			u32	R01_mic_error:1;
+			u32	R01_replay:1;
+			u32	R01_broadcast_frame:1;
+			u32	R01_multicast_frame:1;
+			u32	R01_directed_frame:1;
+			u32	R01_receive_frame_antenna_selection:1;
+			u32	R01_frame_receive_during_atim_window:1;
+			u32	R01_protocol_version_error:1;
+			u32	R01_authentication_frame_icv_error:1;
+			u32	R01_null_key_to_authentication_frame:1;
+			u32	R01_icv_error:1;
+			u32	R01_crc_error:1;
+		};
+#else
+		struct {
+			u32	R01_crc_error:1;
+			u32	R01_icv_error:1;
+			u32	R01_null_key_to_authentication_frame:1;
+			u32	R01_authentication_frame_icv_error:1;
+			u32	R01_protocol_version_error:1;
+			u32	R01_frame_receive_during_atim_window:1;
+			u32	R01_receive_frame_antenna_selection:1;
+			u32	R01_directed_frame:1;
+			u32	R01_multicast_frame:1;
+			u32	R01_broadcast_frame:1;
+			u32	R01_replay:1;
+			u32	R01_mic_error:1;
+			u32	R01_decryption_method:2;
+			u32	R01_LNA_state:2;
+			u32	R01_AGC_state:8;
+			u32	R01_data_rate:3;
+			u32	R01_pre_type:1;
+			u32	R01_mod_type:1;
+			u32	R01_RESERVED:3;
+		};
+#endif
+	};
+};
+
+struct T01_descriptor {
+	union {
+		u32	value;
+#ifdef _BIG_ENDIAN_
+		struct {
+			u32	T01_rts_cts_duration:16;
+			u32	T01_fall_back_rate:3;
+			u32	T01_add_rts:1;
+			u32	T01_add_cts:1;
+			u32	T01_modulation_type:1;
+			u32	T01_plcp_header_length:1;
+			u32	T01_transmit_rate:3;
+			u32	T01_wep_id:2;
+			u32	T01_add_challenge_text:1;
+			u32	T01_inhibit_crc:1;
+			u32	T01_loop_back_wep_mode:1;
+			u32	T01_retry_abort_ebable:1;
+		};
+#else
+		struct {
+			u32	T01_retry_abort_ebable:1;
+			u32	T01_loop_back_wep_mode:1;
+			u32	T01_inhibit_crc:1;
+			u32	T01_add_challenge_text:1;
+			u32	T01_wep_id:2;
+			u32	T01_transmit_rate:3;
+			u32	T01_plcp_header_length:1;
+			u32	T01_modulation_type:1;
+			u32	T01_add_cts:1;
+			u32	T01_add_rts:1;
+			u32	T01_fall_back_rate:3;
+			u32	T01_rts_cts_duration:16;
+		};
+#endif
+	};
+};
+
+struct T02_descriptor {
+	union {
+		u32	value;
+#ifdef _BIG_ENDIAN_
+		struct {
+			u32	T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
+			u32	T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
+			u32	T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
+			u32	T02_Tx_PktID:4;
+			u32	T02_MPDU_Cnt:4;
+			u32	T02_RTS_Cnt:4;
+			u32	T02_RESERVED:7;
+			u32	T02_transmit_complete:1;
+			u32	T02_transmit_abort_due_to_TBTT:1;
+			u32	T02_effective_transmission_rate:1;
+			u32	T02_transmit_without_encryption_due_to_wep_on_false:1;
+			u32	T02_discard_due_to_null_wep_key:1;
+			u32	T02_RESERVED_1:1;
+			u32	T02_out_of_MaxTxMSDULiftTime:1;
+			u32	T02_transmit_abort:1;
+			u32	T02_transmit_fail:1;
+		};
+#else
+		struct {
+			u32	T02_transmit_fail:1;
+			u32	T02_transmit_abort:1;
+			u32	T02_out_of_MaxTxMSDULiftTime:1;
+			u32	T02_RESERVED_1:1;
+			u32	T02_discard_due_to_null_wep_key:1;
+			u32	T02_transmit_without_encryption_due_to_wep_on_false:1;
+			u32	T02_effective_transmission_rate:1;
+			u32	T02_transmit_abort_due_to_TBTT:1;
+			u32	T02_transmit_complete:1;
+			u32	T02_RESERVED:7;
+			u32	T02_RTS_Cnt:4;
+			u32	T02_MPDU_Cnt:4;
+			u32	T02_Tx_PktID:4;
+			u32	T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
+			u32	T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
+			u32	T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
+		};
+#endif
+	};
+};
+
+struct wb35_descriptor { /* Skip length = 8 DWORD */
+	/* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */
+	u8	Descriptor_ID;
+	/* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */
+	u8	RESERVED[3];
+
+	u16	FragmentThreshold;
+	u8	InternalUsed; /* Only can be used by operation of descriptor definition */
+	u8	Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */
+
+	u8	PreambleMode;/* 0: short 1:long */
+	u8	TxRate;
+	u8	FragmentCount;
+	u8	EapFix; /* For speed up key install */
+
+	/* For R00 and T00 ------------------------------ */
+	union {
+		struct R00_descriptor	R00;
+		struct T00_descriptor	T00;
+	};
+
+	/* For R01 and T01 ------------------------------ */
+	union {
+		struct R01_descriptor	R01;
+		struct T01_descriptor	T01;
+	};
+
+	/* For R02 and T02 ------------------------------ */
+	union {
+		u32		R02;
+		struct T02_descriptor	T02;
+	};
+
+	/* For R03 and T03 ------------------------------ */
+	/* For software used */
+	union {
+		u32	R03;
+		u32	T03;
+		struct {
+			u8	buffer_number;
+			u8	buffer_start_index;
+			u16	buffer_total_size;
+		};
+	};
+
+	/* For storing the buffer */
+	u16	buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX];
+	void	*buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX];
+};
+
+
+#define DEFAULT_NULL_PACKET_COUNT	180000	/* 180 seconds */
+
+#define MAX_TXVGA_EEPROM		9	/* How many word(u16) of EEPROM will be used for TxVGA */
+#define MAX_RF_PARAMETER		32
+
+struct txvga_for_50 {
+	u8	ChanNo;
+	u8	TxVgaValue;
+};
+
+/*
+ * ==============================================
+ * Device related include
+ * ==============================================
+ */
+
+#include "wbusb_s.h"
+#include "wb35reg_s.h"
+#include "wb35tx_s.h"
+#include "wb35rx_s.h"
+
+/* For Hal using ============================================ */
+struct hw_data {
+	/* For compatible with 33 */
+	u32	revision;
+	u32	BB3c_cal; /* The value for Tx calibration comes from EEPROM */
+	u32	BB54_cal; /* The value for Rx calibration comes from EEPROM */
+
+	/* For surprise remove */
+	u32	SurpriseRemove; /* 0: Normal 1: Surprise remove */
+	u8	IsKeyPreSet;
+	u8	CalOneTime;
+
+	u8	VCO_trim;
+
+	u32	FragCount;
+	u32	DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */
+
+	/*
+	 * ===============================================
+	 * Definition for MAC address
+	 * ===============================================
+	 */
+	u8	PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */
+	u8	CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */
+
+	/*
+	 * =========================================
+	 * Definition for 802.11
+	 * =========================================
+	 */
+	u8	*bssid_pointer; /* Used by hal_get_bssid for return value */
+	u8	bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */
+	u8	ssid[32]; /* maximum ssid length is 32 byte */
+
+	u16	AID;
+	u8	ssid_length;
+	u8	Channel;
+
+	u16	ListenInterval;
+	u16	CapabilityInformation;
+
+	u16	BeaconPeriod;
+	u16	ProbeDelay;
+
+	u8	bss_type;/* 0: IBSS_NET or 1:ESS_NET */
+	u8	preamble;/* 0: short preamble, 1: long preamble */
+	u8	slot_time_select; /* 9 or 20 value */
+	u8	phy_type; /* Phy select */
+
+	u32	phy_para[MAX_RF_PARAMETER];
+	u32	phy_number;
+
+	u32	CurrentRadioSw; /* 0:On 1:Off */
+	u32	CurrentRadioHw; /* 0:On 1:Off */
+
+	u8	*power_save_point; /* Used by hal_get_power_save_mode for return value */
+	u8	cwmin;
+	u8	desired_power_save;
+	u8	dtim; /* Is running dtim */
+	u8	mapping_key_replace_index; /* In Key table, the next index be replaced */
+
+	u16	MaxReceiveLifeTime;
+	u16	FragmentThreshold;
+	u16	FragmentThreshold_tmp;
+	u16	cwmax;
+
+	u8	Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */
+	u32	Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */
+	u8	CurrentDefaultKeyIndex;
+	u32	CurrentDefaultKeyLength;
+
+	/*
+	 * ==================================================
+	 * Variable for each module
+	 * ==================================================
+	 */
+	struct wb_usb		WbUsb;	/* Need WbUsb.h */
+	struct wb35_reg		reg;	/* Need Wb35Reg.h */
+	struct wb35_tx		Wb35Tx; /* Need Wb35Tx.h */
+	struct wb35_rx		Wb35Rx; /* Need Wb35Rx.h */
+
+	struct timer_list	LEDTimer; /* For LED */
+
+	u32			LEDpoint; /* For LED */
+
+	u32			dto_tx_retry_count;
+	u32			dto_tx_frag_count;
+	u32			rx_ok_count[13]; /* index=0: total rx ok */
+	u32			rx_err_count[13]; /* index=0: total rx err */
+
+	/* for Tx debug */
+	u32			tx_TBTT_start_count;
+	u32			tx_ETR_count;
+	u32			tx_WepOn_false_count;
+	u32			tx_Null_key_count;
+	u32			tx_retry_count[8];
+
+	u8			PowerIndexFromEEPROM; /* For 2412MHz */
+	u8			power_index;
+	u8			IsWaitJoinComplete; /* TRUE: set join request */
+	u8			band;
+
+	u16			SoftwareSet;
+	u16			Reserved_s;
+
+	u32			IsInitOK; /* 0: Driver starting 1: Driver init OK */
+
+	/* For Phy calibration */
+	s32			iq_rsdl_gain_tx_d2;
+	s32			iq_rsdl_phase_tx_d2;
+	u32			txvga_setting_for_cal;
+
+	u8			TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */
+	u8			TxVgaFor24[16]; /* Max is 14, 2 for alignment */
+	struct txvga_for_50		TxVgaFor50[36];	/* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */
+
+	u16			Scan_Interval;
+	u16			RESERVED6;
+
+	/* LED control */
+	u32		LED_control;
+	/*
+	 * LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
+	 * Gray_Led
+	 *		For Led gray setting
+	 * Led
+	 *		0: normal control,
+	 *			LED behavior will decide by EEPROM setting
+	 *		1: Turn off specific LED
+	 *		2: Always on specific LED
+	 *		3: slow blinking specific LED
+	 *		4: fast blinking specific LED
+	 *		5: WPS led control is set. Led0 is Red, Led1 id Green
+	 *
+	 * Led[1] is parameter for WPS LED mode
+	 *		1:InProgress
+	 *		2: Error
+	 *		3: Session overlap
+	 *		4: Success control
+	 */
+	u32		LED_LinkOn;	/* Turn LED on control */
+	u32		LED_Scanning;	/* Let LED in scan process control */
+	u32		LED_Blinking;	/* Temp variable for shining */
+	u32		RxByteCountLast;
+	u32		TxByteCountLast;
+
+	atomic_t	SurpriseRemoveCount;
+
+	/* For global timer */
+	u32		time_count;	/* TICK_TIME_100ms 1 = 100ms */
+
+	/* For error recover */
+	u32		HwStop;
+
+	/* For avoid AP disconnect */
+	u32		NullPacketCount;
+};
+
+#endif