diff options
author | Ondrej Zary <linux@rainbow-software.org> | 2011-06-25 19:14:21 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-07-05 10:33:46 -0700 |
commit | 7648c996ea9c97b0af391f7594c4728ecf47df84 (patch) | |
tree | baa423840e61dc5c406f75340e90c2cd15014a49 /drivers/staging | |
parent | e161a440af564f9fd1214ac4d3b1143b0a159e31 (diff) | |
download | linux-stable-7648c996ea9c97b0af391f7594c4728ecf47df84.tar.gz linux-stable-7648c996ea9c97b0af391f7594c4728ecf47df84.tar.bz2 linux-stable-7648c996ea9c97b0af391f7594c4728ecf47df84.zip |
staging: ft1000: Merge common definitions from USB and PCMCIA drivers
Merge common definitions from ft1000-usb and ft1000-pcmcia drivers to
a common ft1000.h file.
This revealed two odd things in ft1000-usb which might be bugs so add
comments about them to ft1000_usb.h.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/ft1000/ft1000-pcmcia/ft1000.h | 249 | ||||
-rw-r--r-- | drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h | 32 | ||||
-rw-r--r-- | drivers/staging/ft1000/ft1000-usb/ft1000_usb.h | 413 | ||||
-rw-r--r-- | drivers/staging/ft1000/ft1000.h | 252 |
4 files changed, 264 insertions, 682 deletions
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h b/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h index ba6f87db20aa..3b0130fe6083 100644 --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h @@ -19,263 +19,18 @@ #ifndef _FT1000H_ #define _FT1000H_ -#define FT1000_DRV_VER 0x01010300 - -#define DSPVERSZ 4 -#define HWSERNUMSZ 16 -#define SKUSZ 20 -#define EUISZ 8 -#define MODESZ 2 -#define CALVERSZ 2 -#define CALDATESZ 6 - -/* Pseudo Header structure */ -struct pseudo_hdr { - unsigned short length; /* length of msg body */ - unsigned char source; /* hardware source id */ - /* Host = 0x10 */ - /* Dsp = 0x20 */ - unsigned char destination; /* hardware destination id (refer to source) */ - unsigned char portdest; /* software destination port id */ - /* Host = 0x00 */ - /* Applicaton Broadcast = 0x10 */ - /* Network Stack = 0x20 */ - /* Dsp OAM = 0x80 */ - /* Dsp Airlink = 0x90 */ - /* Dsp Loader = 0xa0 */ - /* Dsp MIP = 0xb0 */ - unsigned char portsrc; /* software source port id (refer to portdest) */ - unsigned short sh_str_id; /* not used */ - unsigned char control; /* not used */ - unsigned char rsvd1; - unsigned char seq_num; /* message sequence number */ - unsigned char rsvd2; - unsigned short qos_class; /* not used */ - unsigned short checksum; /* pseudo header checksum */ -} __packed; - -#define ELECTRABUZZ_ID 0 /* ASIC ID for Electrabuzz */ -#define MAGNEMITE_ID 0x1a01 /* ASIC ID for Magnemite */ - -/* MEMORY MAP common to both ELECTRABUZZ and MAGNEMITE */ -#define FT1000_REG_DPRAM_ADDR 0x000E /* DPADR - Dual Port Ram Indirect Address Register */ -#define FT1000_REG_SUP_CTRL 0x0020 /* HCTR - Host Control Register */ -#define FT1000_REG_SUP_STAT 0x0022 /* HSTAT - Host Status Register */ -#define FT1000_REG_RESET 0x0024 /* HCTR - Host Control Register */ -#define FT1000_REG_SUP_ISR 0x0026 /* HISR - Host Interrupt Status Register */ -#define FT1000_REG_SUP_IMASK 0x0028 /* HIMASK - Host Interrupt Mask */ -#define FT1000_REG_DOORBELL 0x002a /* DBELL - Door Bell Register */ -#define FT1000_REG_ASIC_ID 0x002e /* ASICID - ASIC Identification Number */ - -/* MEMORY MAP FOR ELECTRABUZZ ASIC */ -#define FT1000_REG_UFIFO_STAT 0x0000 /* UFSR - Uplink FIFO status register */ -#define FT1000_REG_UFIFO_BEG 0x0002 /* UFBR - Uplink FIFO beginning register */ -#define FT1000_REG_UFIFO_MID 0x0004 /* UFMR - Uplink FIFO middle register */ -#define FT1000_REG_UFIFO_END 0x0006 /* UFER - Uplink FIFO end register */ -#define FT1000_REG_DFIFO_STAT 0x0008 /* DFSR - Downlink FIFO status register */ -#define FT1000_REG_DFIFO 0x000A /* DFR - Downlink FIFO Register */ -#define FT1000_REG_DPRAM_DATA 0x000C /* DPRAM - Dual Port Indirect Data Register */ -#define FT1000_REG_WATERMARK 0x0010 /* WMARK - Watermark Register */ - -/* MEMORY MAP FOR MAGNEMITE */ -#define FT1000_REG_MAG_UFDR 0x0000 /* UFDR - Uplink FIFO Data Register (32-bits) */ -#define FT1000_REG_MAG_UFDRL 0x0000 /* UFDRL - Uplink FIFO Data Register low-word (16-bits) */ -#define FT1000_REG_MAG_UFDRH 0x0002 /* UFDRH - Uplink FIFO Data Register high-word (16-bits) */ -#define FT1000_REG_MAG_UFER 0x0004 /* UFER - Uplink FIFO End Register */ -#define FT1000_REG_MAG_UFSR 0x0006 /* UFSR - Uplink FIFO Status Register */ -#define FT1000_REG_MAG_DFR 0x0008 /* DFR - Downlink FIFO Register (32-bits) */ -#define FT1000_REG_MAG_DFRL 0x0008 /* DFRL - Downlink FIFO Register low-word (16-bits) */ -#define FT1000_REG_MAG_DFRH 0x000a /* DFRH - Downlink FIFO Register high-word (16-bits) */ -#define FT1000_REG_MAG_DFSR 0x000c /* DFSR - Downlink FIFO Status Register */ -#define FT1000_REG_MAG_DPDATA 0x0010 /* DPDATA - Dual Port RAM Indirect Data Register (32-bits) */ -#define FT1000_REG_MAG_DPDATAL 0x0010 /* DPDATAL - Dual Port RAM Indirect Data Register low-word (16-bits) */ -#define FT1000_REG_MAG_DPDATAH 0x0012 /* DPDATAH - Dual Port RAM Indirect Data Register high-word (16-bits) */ -#define FT1000_REG_MAG_WATERMARK 0x002c /* WMARK - Watermark Register */ - -/* Reserved Dual Port RAM offsets for Electrabuzz */ -#define FT1000_DPRAM_TX_BASE 0x0002 /* Host to PC Card Messaging Area */ -#define FT1000_DPRAM_RX_BASE 0x0800 /* PC Card to Host Messaging Area */ -#define FT1000_FIFO_LEN 0x07FC /* total length for DSP FIFO tracking */ -#define FT1000_HI_HO 0x07FE /* heartbeat with HI/HO */ -#define FT1000_DSP_STATUS 0x0FFE /* dsp status - non-zero is a request to reset dsp */ -#define FT1000_DSP_LED 0x0FFA /* dsp led status for PAD device */ -#define FT1000_DSP_CON_STATE 0x0FF8 /* DSP Connection Status Info */ -#define FT1000_DPRAM_FEFE 0x0002 /* location for dsp ready indicator */ -#define FT1000_DSP_TIMER0 0x1FF0 /* Timer Field from Basestation */ -#define FT1000_DSP_TIMER1 0x1FF2 /* Timer Field from Basestation */ -#define FT1000_DSP_TIMER2 0x1FF4 /* Timer Field from Basestation */ -#define FT1000_DSP_TIMER3 0x1FF6 /* Timer Field from Basestation */ - -/* Reserved Dual Port RAM offsets for Magnemite */ -#define FT1000_DPRAM_MAG_TX_BASE 0x0000 /* Host to PC Card Messaging Area */ -#define FT1000_DPRAM_MAG_RX_BASE 0x0200 /* PC Card to Host Messaging Area */ - -#define FT1000_MAG_FIFO_LEN 0x1FF /* total length for DSP FIFO tracking */ -#define FT1000_MAG_FIFO_LEN_INDX 0x1 /* low-word index */ -#define FT1000_MAG_HI_HO 0x1FF /* heartbeat with HI/HO */ -#define FT1000_MAG_HI_HO_INDX 0x0 /* high-word index */ -#define FT1000_MAG_DSP_LED 0x3FE /* dsp led status for PAD device */ -#define FT1000_MAG_DSP_LED_INDX 0x0 /* dsp led status for PAD device */ -#define FT1000_MAG_DSP_CON_STATE 0x3FE /* DSP Connection Status Info */ -#define FT1000_MAG_DSP_CON_STATE_INDX 0x1 /* DSP Connection Status Info */ -#define FT1000_MAG_DPRAM_FEFE 0x000 /* location for dsp ready indicator */ -#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 /* location for dsp ready indicator */ -#define FT1000_MAG_DSP_TIMER0 0x3FC /* Timer Field from Basestation */ -#define FT1000_MAG_DSP_TIMER0_INDX 0x1 -#define FT1000_MAG_DSP_TIMER1 0x3FC /* Timer Field from Basestation */ -#define FT1000_MAG_DSP_TIMER1_INDX 0x0 -#define FT1000_MAG_DSP_TIMER2 0x3FD /* Timer Field from Basestation */ -#define FT1000_MAG_DSP_TIMER2_INDX 0x1 -#define FT1000_MAG_DSP_TIMER3 0x3FD /* Timer Field from Basestation */ -#define FT1000_MAG_DSP_TIMER3_INDX 0x0 -#define FT1000_MAG_TOTAL_LEN 0x200 -#define FT1000_MAG_TOTAL_LEN_INDX 0x1 -#define FT1000_MAG_PH_LEN 0x200 -#define FT1000_MAG_PH_LEN_INDX 0x0 -#define FT1000_MAG_PORT_ID 0x201 -#define FT1000_MAG_PORT_ID_INDX 0x0 +#include "../ft1000.h" -#define HOST_INTF_LE 0x0 /* Host interface little endian mode */ -#define HOST_INTF_BE 0x1 /* Host interface big endian mode */ - -/* PC Card to Host Doorbell assignments */ -#define FT1000_DB_DPRAM_RX 0x0001 /* this value indicates that DSP has data for host in DPRAM */ -#define FT1000_ASIC_RESET_REQ 0x0004 /* DSP requesting host to reset the ASIC */ -#define FT1000_DSP_ASIC_RESET 0x0008 /* DSP indicating host that it will reset the ASIC */ -#define FT1000_DB_COND_RESET 0x0010 /* DSP request for a card reset. */ - -/* Host to PC Card Doorbell assignments */ -#define FT1000_DB_DPRAM_TX 0x0100 /* this value indicates that host has data for DSP in DPRAM. */ -#define FT1000_ASIC_RESET_DSP 0x0400 /* Responds to FT1000_ASIC_RESET_REQ */ -#define FT1000_DB_HB 0x1000 /* Indicates that supervisor has a heartbeat message for DSP. */ +#define FT1000_DRV_VER 0x01010300 #define FT1000_DPRAM_BASE 0x0000 /* Dual Port RAM starting offset */ -#define hi 0x6869 /* PC Card heartbeat values */ -#define ho 0x686f /* PC Card heartbeat values */ - -/* Magnemite specific defines */ -#define hi_mag 0x6968 /* Byte swap hi to avoid additional system call */ -#define ho_mag 0x6f68 /* Byte swap ho to avoid additional system call */ - -/* Bit field definitions for Host Interrupt Status Register */ -/* Indicate the cause of an interrupt. */ -#define ISR_EMPTY 0x00 /* no bits set */ -#define ISR_DOORBELL_ACK 0x01 /* Doorbell acknowledge from DSP */ -#define ISR_DOORBELL_PEND 0x02 /* Doorbell pending from DSP */ -#define ISR_RCV 0x04 /* Packet available in Downlink FIFO */ -#define ISR_WATERMARK 0x08 /* Watermark requirements satisfied */ - -/* Bit field definition for Host Interrupt Mask */ -#define ISR_MASK_NONE 0x0000 /* no bits set */ -#define ISR_MASK_DOORBELL_ACK 0x0001 /* Doorbell acknowledge mask */ -#define ISR_MASK_DOORBELL_PEND 0x0002 /* Doorbell pending mask */ -#define ISR_MASK_RCV 0x0004 /* Downlink Packet available mask */ -#define ISR_MASK_WATERMARK 0x0008 /* Watermark interrupt mask */ -#define ISR_MASK_ALL 0xffff /* Mask all interrupts */ - -/* Bit field definition for Host Control Register */ -#define DSP_RESET_BIT 0x0001 /* Bit field to control dsp reset state */ - /* (0 = out of reset 1 = reset) */ -#define ASIC_RESET_BIT 0x0002 /* Bit field to control ASIC reset state */ - /* (0 = out of reset 1 = reset) */ - -/* Default interrupt mask (Enable Doorbell pending and Packet available interrupts) */ -#define ISR_DEFAULT_MASK 0x7ff9 - -/* Application specific IDs */ -#define DSPID 0x20 -#define HOSTID 0x10 -#define DSPAIRID 0x90 -#define DRIVERID 0x00 -#define NETWORKID 0x20 - -/* Size of DPRAM Message */ -#define MAX_CMD_SQSIZE 1780 - -#define ENET_MAX_SIZE 1514 -#define ENET_HEADER_SIZE 14 - -#define SLOWQ_TYPE 0 -#define FASTQ_TYPE 1 - -#define MAX_DSP_SESS_REC 1024 - -#define DSP_QID_OFFSET 4 - /* Maximum number of occurrence of pseudo header errors before resetting PC Card. */ #define MAX_PH_ERR 300 -/* Driver message types */ -#define MEDIA_STATE 0x0010 -#define TIME_UPDATE 0x0020 -#define DSP_PROVISION 0x0030 -#define DSP_INIT_MSG 0x0050 -#define DSP_HIBERNATE 0x0060 - -#define DSP_STORE_INFO 0x0070 -#define DSP_GET_INFO 0x0071 -#define GET_DRV_ERR_RPT_MSG 0x0073 -#define RSP_DRV_ERR_RPT_MSG 0x0074 - -/* Driver Error Messages for DSP */ -#define DSP_HB_INFO 0x7ef0 -#define DSP_FIFO_INFO 0x7ef1 -#define DSP_CONDRESET_INFO 0x7ef2 -#define DSP_CMDLEN_INFO 0x7ef3 -#define DSP_CMDPHCKSUM_INFO 0x7ef4 -#define DSP_PKTPHCKSUM_INFO 0x7ef5 -#define DSP_PKTLEN_INFO 0x7ef6 -#define DSP_USER_RESET 0x7ef7 -#define FIFO_FLUSH_MAXLIMIT 0x7ef8 -#define FIFO_FLUSH_BADCNT 0x7ef9 -#define FIFO_ZERO_LEN 0x7efa - -#define HOST_QID_OFFSET 5 -#define QTYPE_OFFSET 13 - #define SUCCESS 0x00 #define FAILURE 0x01 -#define MAXIMUM_ASIC_HB_CNT 15 - -struct drv_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u8 data[0]; -} __packed; - -struct media_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u16 state; - u32 ip_addr; - u32 net_mask; - u32 gateway; - u32 dns_1; - u32 dns_2; -} __packed; - -struct dsp_init_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u8 DspVer[DSPVERSZ]; /* DSP version number */ - u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */ - u8 Sku[SKUSZ]; /* SKU */ - u8 eui64[EUISZ]; /* EUI64 */ - u8 ProductMode[MODESZ]; /* Product Mode (Market/Production) */ - u8 RfCalVer[CALVERSZ]; /* Rf Calibration version */ - u8 RfCalDate[CALDATESZ]; /* Rf Calibration date */ -} __packed; - -struct prov_record { - struct list_head list; - u8 *pprov_data; -}; - struct ft1000_info { struct net_device_stats stats; u16 DrvErrNum; diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h b/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h index 6a8a1969f9e1..3f4207fd1597 100644 --- a/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h @@ -26,38 +26,6 @@ #ifndef _FT1000IOCTLH_ #define _FT1000IOCTLH_ -#define DSPVERSZ 4 -#define HWSERNUMSZ 16 -#define SKUSZ 20 -#define EUISZ 8 -#define CALVERSZ 2 -#define CALDATESZ 6 - -#define MAX_DNLD_BLKSZ 1024 - -// Standard Flarion Pseudo header -struct pseudo_hdr { - unsigned short length; //length of msg body - unsigned char source; //source address (0x10=Host 0x20=DSP) - unsigned char destination; //destination address (refer to source address) - unsigned char portdest; //destination port id - // 0x00=Driver - // 0x10=Application Broadcast - // 0x20=Network Stack - // 0x80=Dsp OAM - // 0x90=Dsp Airlink - // 0xa0=Dsp Loader - // 0xb0=Dsp MIP - unsigned char portsrc; //source port id (refer to portdest) - unsigned short sh_str_id; //stream id (Not applicable on Mobile) - unsigned char control; //stream id (Not applicable on Mobile) - unsigned char rsvd1; //reserved - unsigned char seq_num; //sequence number - unsigned char rsvd2; //reserved - unsigned short qos_class; //Quality of Service class (Not applicable on Mobile) - unsigned short checksum; //Pseudo header checksum -} __attribute__ ((packed)); - typedef struct _IOCTL_GET_VER { unsigned long drv_ver; diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h index 0b30020c7548..51c084756b4a 100644 --- a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h @@ -2,81 +2,18 @@ #define _FT1000_USB_H_ /*Jim*/ +#include "../ft1000.h" #include "ft1000_ioctl.h" #define FT1000_DRV_VER 0x01010403 -#define MODESZ 2 #define MAX_NUM_APP 6 #define MAX_MSG_LIMIT 200 #define NUM_OF_FREE_BUFFERS 1500 -// Driver message types -#define MEDIA_STATE 0x0010 -#define DSP_PROVISION 0x0030 -#define DSP_INIT_MSG 0x0050 -#define DSP_STORE_INFO 0x0070 -#define DSP_GET_INFO 0x0071 -#define GET_DRV_ERR_RPT_MSG 0x0073 -#define RSP_DRV_ERR_RPT_MSG 0x0074 - - -// Size of DPRAM Command -#define MAX_CMD_SQSIZE 1780 -#define SLOWQ_TYPE 0 #define PSEUDOSZ 16 -#define DSP_QID_OFFSET 4 - - -// MEMORY MAP FOR ELECTRABUZZ ASIC -#define FT1000_REG_DFIFO_STAT 0x0008 // Downlink FIFO status register -#define FT1000_REG_DPRAM_DATA 0x000C // DPRAM VALUE in DPRAM ADDR - -#define FT1000_DSP_LED 0xFFA // dsp led status for PAD device - -#define FT1000_MAG_DSP_LED 0x3FE // dsp led status for PAD device -#define FT1000_MAG_DSP_LED_INDX 0x1 // dsp led status for PAD device #define SUCCESS 0x00 - -#define DRIVERID 0x00 - -// Driver Error Messages for DSP -#define DSP_CONDRESET_INFO 0x7ef2 -#define DSP_HB_INFO 0x7ef0 - -// Magnemite specific defines -#define hi_mag 0x6968 // Byte swap hi to avoid additional system call -#define ho_mag 0x6f68 // Byte swap ho to avoid additional system call - - - -struct media_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u16 state; - u32 ip_addr; - u32 net_mask; - u32 gateway; - u32 dns_1; - u32 dns_2; -} __attribute__ ((packed)); - -struct dsp_init_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u8 DspVer[DSPVERSZ]; // DSP version number - u8 HwSerNum[HWSERNUMSZ]; // Hardware Serial Number - u8 Sku[SKUSZ]; // SKU - u8 eui64[EUISZ]; // EUI64 - u8 ProductMode[MODESZ]; // Product Mode (Market/Production) - u8 RfCalVer[CALVERSZ]; // Rf Calibration version - u8 RfCalDate[CALDATESZ]; // Rf Calibration date -} __attribute__ ((packed)); - - struct app_info_block { u32 nTxMsg; // DPRAM msg sent to DSP with app_id u32 nRxMsg; // DPRAM msg rcv from dsp with app_id @@ -90,11 +27,6 @@ struct app_info_block { struct list_head app_sqlist; // link list of msgs for applicaton on slow queue } __attribute__((packed)); -struct prov_record { - struct list_head list; - u8 *pprov_data; -}; - /*end of Jim*/ #define DEBUG(args...) printk(KERN_INFO args) @@ -108,350 +40,25 @@ struct prov_record { #define LARGE_TIMEOUT 5000 -#define MAX_DSP_SESS_REC 1024 - -#define MAX_NUM_CARDS 32 - -#define DSPVERSZ 4 -#define HWSERNUMSZ 16 -#define SKUSZ 20 -#define EUISZ 8 -#define CALVERSZ 2 -#define CALDATESZ 6 -#define MODESZ 2 - -#define DSPID 0x20 -#define HOSTID 0x10 - -#define DSPOAM 0x80 -#define DSPAIRID 0x90 - -#define DRIVERID 0x00 -#define FMM 0x10 -#define NETWORKID 0x20 -#define AUTOLNCHID 0x30 -#define DSPLPBKID 0x40 - #define DSPBCMSGID 0x10 -#define ENET_MAX_SIZE 1514 -#define ENET_HEADER_SIZE 14 - - -#define CIS_NET_ADDR_OFFSET 0xff0 - -// MAGNEMITE specific - -#define FT1000_REG_MAG_UFDR 0x0000 // Uplink FIFO Data Register. - -#define FT1000_REG_MAG_UFDRL 0x0000 // Uplink FIFO Data Register low-word. - -#define FT1000_REG_MAG_UFDRH 0x0002 // Uplink FIFO Data Register high-word. - -#define FT1000_REG_MAG_UFER 0x0004 // Uplink FIFO End Register - -#define FT1000_REG_MAG_UFSR 0x0006 // Uplink FIFO Status Register - -#define FT1000_REG_MAG_DFR 0x0008 // Downlink FIFO Register - -#define FT1000_REG_MAG_DFRL 0x0008 // Downlink FIFO Register low-word - -#define FT1000_REG_MAG_DFRH 0x000a // Downlink FIFO Register high-word - -#define FT1000_REG_MAG_DFSR 0x000c // Downlink FIFO Status Register - -#define FT1000_REG_MAG_DPDATA 0x0010 // Dual Port RAM Indirect Data Register - -#define FT1000_REG_MAG_DPDATAL 0x0010 // Dual Port RAM Indirect Data Register low-word - -#define FT1000_REG_MAG_DPDATAH 0x0012 // Dual Port RAM Indirect Data Register high-word - -#define FT1000_REG_MAG_WATERMARK 0x002c // Supv. Control Reg. LLC register - -#define FT1000_REG_MAG_VERSION 0x0030 // LLC Version LLC register - - - -// Common - -#define FT1000_REG_DPRAM_ADDR 0x000E // DPRAM ADDRESS when card in IO mode - -#define FT1000_REG_SUP_CTRL 0x0020 // Supv. Control Reg. LLC register - -#define FT1000_REG_SUP_STAT 0x0022 // Supv. Status Reg LLC register - -#define FT1000_REG_RESET 0x0024 // Reset Reg LLC register - -#define FT1000_REG_SUP_ISR 0x0026 // Supv ISR LLC register - -#define FT1000_REG_SUP_IMASK 0x0028 // Supervisor Interrupt Mask LLC register - -#define FT1000_REG_DOORBELL 0x002a // Door Bell Reg LLC register - -#define FT1000_REG_ASIC_ID 0x002e // ASIC Identification Number - - // (Electrabuzz=0 Magnemite=TBD) - - - -// DSP doorbells - -#define FT1000_DB_DPRAM_RX 0x0001 // this value indicates that DSP has - - // data for host in DPRAM SlowQ - -#define FT1000_DB_DNLD_RX 0x0002 // Downloader handshake doorbell - -#define FT1000_ASIC_RESET_REQ 0x0004 - -#define FT1000_DSP_ASIC_RESET 0x0008 - - - -#define FT1000_DB_COND_RESET 0x0010 - - - -// Host doorbells - -#define FT1000_DB_DPRAM_TX 0x0100 // this value indicates that host has - - // data for DSP in DPRAM. - -#define FT1000_DB_DNLD_TX 0x0200 // Downloader handshake doorbell - -#define FT1000_ASIC_RESET_DSP 0x0400 - -#define FT1000_DB_HB 0x1000 // this value indicates that supervisor - - - -// Electrabuzz specific DPRAM mapping // has a heartbeat message for DSP. - -#define FT1000_DPRAM_BASE 0x1000 // 0x0000 to 0x07FF DPRAM 2Kx16 - R/W from PCMCIA or DSP - -#define FT1000_DPRAM_TX_BASE 0x1002 // TX AREA (SlowQ) - -#define FT1000_DPRAM_RX_BASE 0x1800 // RX AREA (SlowQ) - -#define FT1000_DPRAM_SIZE 0x1000 // 4K bytes - - - -#define FT1000_DRV_DEBUG 0x17E0 // Debug area for driver - -#define FT1000_FIFO_LEN 0x17FC // total length for DSP FIFO tracking - -#define FT1000_HI_HO 0x17FE // heartbeat with HI/HO - -#define FT1000_DSP_STATUS 0x1FFE // dsp status - non-zero is a request to reset dsp - - - -#define FT1000_DSP_CON_STATE 0x1FF8 // DSP Connection Status Info - -#define FT1000_DSP_LEDS 0x1FFA // DSP LEDS for rcv pwr strength, Rx data, Tx data - -#define DSP_TIMESTAMP 0x1FFC // dsp timestamp - -#define DSP_TIMESTAMP_DIFF 0x1FFA // difference of dsp timestamp in DPRAM and Pseudo header. - - - -#define FT1000_DPRAM_FEFE 0x1002 // Dsp Downloader handshake location - - - -#define FT1000_DSP_TIMER0 0x1FF0 - -#define FT1000_DSP_TIMER1 0x1FF2 - -#define FT1000_DSP_TIMER2 0x1FF4 - -#define FT1000_DSP_TIMER3 0x1FF6 - - +/* Electrabuzz specific DPRAM mapping */ +/* this is used by ft1000_usb driver - isn't that a bug? */ +#undef FT1000_DPRAM_RX_BASE +#define FT1000_DPRAM_RX_BASE 0x1800 /* RX AREA (SlowQ) */ // MEMORY MAP FOR MAGNEMITE - -#define FT1000_DPRAM_MAG_TX_BASE 0x0000 // TX AREA (SlowQ) - -#define FT1000_DPRAM_MAG_RX_BASE 0x0200 // RX AREA (SlowQ) - - - -#define FT1000_MAG_FIFO_LEN 0x1FF // total length for DSP FIFO tracking - -#define FT1000_MAG_FIFO_LEN_INDX 0x1 // low-word index - -#define FT1000_MAG_HI_HO 0x1FF // heartbeat with HI/HO - -#define FT1000_MAG_HI_HO_INDX 0x0 // high-word index - -#define FT1000_MAG_DSP_LEDS 0x3FE // dsp led status for PAD device - -#define FT1000_MAG_DSP_LEDS_INDX 0x1 // dsp led status for PAD device - - - -#define FT1000_MAG_DSP_CON_STATE 0x3FE // DSP Connection Status Info - -#define FT1000_MAG_DSP_CON_STATE_INDX 0x0 // DSP Connection Status Info - - - -#define FT1000_MAG_DPRAM_FEFE 0x000 // location for dsp ready indicator - -#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 // location for dsp ready indicator - - - -#define FT1000_MAG_DSP_TIMER0 0x3FC - -#define FT1000_MAG_DSP_TIMER0_INDX 0x1 - - - -#define FT1000_MAG_DSP_TIMER1 0x3FC - -#define FT1000_MAG_DSP_TIMER1_INDX 0x0 - - - -#define FT1000_MAG_DSP_TIMER2 0x3FD - -#define FT1000_MAG_DSP_TIMER2_INDX 0x1 - - - -#define FT1000_MAG_DSP_TIMER3 0x3FD - -#define FT1000_MAG_DSP_TIMER3_INDX 0x0 - - - -#define FT1000_MAG_TOTAL_LEN 0x200 - -#define FT1000_MAG_TOTAL_LEN_INDX 0x1 - - - -#define FT1000_MAG_PH_LEN 0x200 - -#define FT1000_MAG_PH_LEN_INDX 0x0 - - - -#define FT1000_MAG_PORT_ID 0x201 - -#define FT1000_MAG_PORT_ID_INDX 0x0 - - - -// - -// Constants for the FT1000_REG_SUP_ISR - -// - -// Indicate the cause of an interrupt. - -// - -// SUPERVISOR ISR BIT MAPS - - - -#define ISR_EMPTY (u8)0x00 // no bits set in ISR - -#define ISR_DOORBELL_ACK (u8)0x01 // the doorbell i sent has been received. - -#define ISR_DOORBELL_PEND (u8)0x02 // doorbell for me - -#define ISR_RCV (u8)0x04 // packet received with no errors - -#define ISR_WATERMARK (u8)0x08 // - - - -// Interrupt mask register defines - -// note these are different from the ISR BIT MAPS. - -#define ISR_MASK_NONE 0x0000 - -#define ISR_MASK_DOORBELL_ACK 0x0001 - -#define ISR_MASK_DOORBELL_PEND 0x0002 - -#define ISR_MASK_RCV 0x0004 - -#define ISR_MASK_WATERMARK 0x0008 // Normally we will only mask the watermark interrupt when we want to enable interrupts. - -#define ISR_MASK_ALL 0xffff - - - -#define HOST_INTF_LE 0x0000 // Host interface little endian - -#define HOST_INTF_BE 0x0001 // Host interface big endian - - - -#define ISR_DEFAULT_MASK 0x7ff9 - - - -#define hi 0x6869 - -#define ho 0x686f - - - -#define FT1000_ASIC_RESET 0x80 // COR value for soft reset to PCMCIA core - -#define FT1000_ASIC_BITS 0x51 // Bits set in COR register under normal operation - -#define FT1000_ASIC_MAG_BITS 0x55 // Bits set in COR register under normal operation - - - -#define FT1000_COR_OFFSET 0x100 - - - -#define ELECTRABUZZ_ID 0 // ASIC ID for ELECTRABUZZ - -#define MAGNEMITE_ID 0x1a01 // ASIC ID for MAGNEMITE - - +/* the indexes are swapped comparing to PCMCIA - is it OK or a bug? */ +#undef FT1000_MAG_DSP_LED_INDX +#define FT1000_MAG_DSP_LED_INDX 0x1 /* dsp led status for PAD device */ +#undef FT1000_MAG_DSP_CON_STATE_INDX +#define FT1000_MAG_DSP_CON_STATE_INDX 0x0 /* DSP Connection Status Info */ // Maximum times trying to get ASIC out of reset - #define MAX_ASIC_RESET_CNT 20 - - -#define DSP_RESET_BIT 0x1 - -#define ASIC_RESET_BIT 0x2 - -#define DSP_UNENCRYPTED 0x4 - -#define DSP_ENCRYPTED 0x8 - -#define EFUSE_MEM_DISABLE 0x0040 - - #define MAX_BUF_SIZE 4096 -struct drv_msg { - struct pseudo_hdr pseudo; - u16 type; - u16 length; - u8 data[0]; -} __attribute__ ((packed)); - struct ft1000_device { struct usb_device *dev; diff --git a/drivers/staging/ft1000/ft1000.h b/drivers/staging/ft1000/ft1000.h new file mode 100644 index 000000000000..03baa5779234 --- /dev/null +++ b/drivers/staging/ft1000/ft1000.h @@ -0,0 +1,252 @@ +/* + * Common structures and definitions for FT1000 Flarion Flash OFDM PCMCIA and USB devices + * + * Originally copyright (c) 2002 Flarion Technologies + * + */ + +#define DSPVERSZ 4 +#define HWSERNUMSZ 16 +#define SKUSZ 20 +#define EUISZ 8 +#define MODESZ 2 +#define CALVERSZ 2 +#define CALDATESZ 6 + +#define ELECTRABUZZ_ID 0 /* ASIC ID for Electrabuzz */ +#define MAGNEMITE_ID 0x1a01 /* ASIC ID for Magnemite */ + +/* MEMORY MAP common to both ELECTRABUZZ and MAGNEMITE */ +#define FT1000_REG_DPRAM_ADDR 0x000E /* DPADR - Dual Port Ram Indirect Address Register */ +#define FT1000_REG_SUP_CTRL 0x0020 /* HCTR - Host Control Register */ +#define FT1000_REG_SUP_STAT 0x0022 /* HSTAT - Host Status Register */ +#define FT1000_REG_RESET 0x0024 /* HCTR - Host Control Register */ +#define FT1000_REG_SUP_ISR 0x0026 /* HISR - Host Interrupt Status Register */ +#define FT1000_REG_SUP_IMASK 0x0028 /* HIMASK - Host Interrupt Mask */ +#define FT1000_REG_DOORBELL 0x002a /* DBELL - Door Bell Register */ +#define FT1000_REG_ASIC_ID 0x002e /* ASICID - ASIC Identification Number */ + +/* MEMORY MAP FOR ELECTRABUZZ ASIC */ +#define FT1000_REG_UFIFO_STAT 0x0000 /* UFSR - Uplink FIFO status register */ +#define FT1000_REG_UFIFO_BEG 0x0002 /* UFBR - Uplink FIFO beginning register */ +#define FT1000_REG_UFIFO_MID 0x0004 /* UFMR - Uplink FIFO middle register */ +#define FT1000_REG_UFIFO_END 0x0006 /* UFER - Uplink FIFO end register */ +#define FT1000_REG_DFIFO_STAT 0x0008 /* DFSR - Downlink FIFO status register */ +#define FT1000_REG_DFIFO 0x000A /* DFR - Downlink FIFO Register */ +#define FT1000_REG_DPRAM_DATA 0x000C /* DPRAM - Dual Port Indirect Data Register */ +#define FT1000_REG_WATERMARK 0x0010 /* WMARK - Watermark Register */ + +/* MEMORY MAP FOR MAGNEMITE */ +#define FT1000_REG_MAG_UFDR 0x0000 /* UFDR - Uplink FIFO Data Register (32-bits) */ +#define FT1000_REG_MAG_UFDRL 0x0000 /* UFDRL - Uplink FIFO Data Register low-word (16-bits) */ +#define FT1000_REG_MAG_UFDRH 0x0002 /* UFDRH - Uplink FIFO Data Register high-word (16-bits) */ +#define FT1000_REG_MAG_UFER 0x0004 /* UFER - Uplink FIFO End Register */ +#define FT1000_REG_MAG_UFSR 0x0006 /* UFSR - Uplink FIFO Status Register */ +#define FT1000_REG_MAG_DFR 0x0008 /* DFR - Downlink FIFO Register (32-bits) */ +#define FT1000_REG_MAG_DFRL 0x0008 /* DFRL - Downlink FIFO Register low-word (16-bits) */ +#define FT1000_REG_MAG_DFRH 0x000a /* DFRH - Downlink FIFO Register high-word (16-bits) */ +#define FT1000_REG_MAG_DFSR 0x000c /* DFSR - Downlink FIFO Status Register */ +#define FT1000_REG_MAG_DPDATA 0x0010 /* DPDATA - Dual Port RAM Indirect Data Register (32-bits) */ +#define FT1000_REG_MAG_DPDATAL 0x0010 /* DPDATAL - Dual Port RAM Indirect Data Register low-word (16-bits) */ +#define FT1000_REG_MAG_DPDATAH 0x0012 /* DPDATAH - Dual Port RAM Indirect Data Register high-word (16-bits) */ +#define FT1000_REG_MAG_WATERMARK 0x002c /* WMARK - Watermark Register */ +#define FT1000_REG_MAG_VERSION 0x0030 /* LLC Version */ + +/* Reserved Dual Port RAM offsets for Electrabuzz */ +#define FT1000_DPRAM_TX_BASE 0x0002 /* Host to PC Card Messaging Area */ +#define FT1000_DPRAM_RX_BASE 0x0800 /* PC Card to Host Messaging Area */ +#define FT1000_FIFO_LEN 0x07FC /* total length for DSP FIFO tracking */ +#define FT1000_HI_HO 0x07FE /* heartbeat with HI/HO */ +#define FT1000_DSP_STATUS 0x0FFE /* dsp status - non-zero is a request to reset dsp */ +#define FT1000_DSP_LED 0x0FFA /* dsp led status for PAD device */ +#define FT1000_DSP_CON_STATE 0x0FF8 /* DSP Connection Status Info */ +#define FT1000_DPRAM_FEFE 0x0002 /* location for dsp ready indicator */ +#define FT1000_DSP_TIMER0 0x1FF0 /* Timer Field from Basestation */ +#define FT1000_DSP_TIMER1 0x1FF2 /* Timer Field from Basestation */ +#define FT1000_DSP_TIMER2 0x1FF4 /* Timer Field from Basestation */ +#define FT1000_DSP_TIMER3 0x1FF6 /* Timer Field from Basestation */ + +/* Reserved Dual Port RAM offsets for Magnemite */ +#define FT1000_DPRAM_MAG_TX_BASE 0x0000 /* Host to PC Card Messaging Area */ +#define FT1000_DPRAM_MAG_RX_BASE 0x0200 /* PC Card to Host Messaging Area */ + +#define FT1000_MAG_FIFO_LEN 0x1FF /* total length for DSP FIFO tracking */ +#define FT1000_MAG_FIFO_LEN_INDX 0x1 /* low-word index */ +#define FT1000_MAG_HI_HO 0x1FF /* heartbeat with HI/HO */ +#define FT1000_MAG_HI_HO_INDX 0x0 /* high-word index */ +#define FT1000_MAG_DSP_LED 0x3FE /* dsp led status for PAD device */ +#define FT1000_MAG_DSP_LED_INDX 0x0 /* dsp led status for PAD device */ +#define FT1000_MAG_DSP_CON_STATE 0x3FE /* DSP Connection Status Info */ +#define FT1000_MAG_DSP_CON_STATE_INDX 0x1 /* DSP Connection Status Info */ +#define FT1000_MAG_DPRAM_FEFE 0x000 /* location for dsp ready indicator */ +#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 /* location for dsp ready indicator */ +#define FT1000_MAG_DSP_TIMER0 0x3FC /* Timer Field from Basestation */ +#define FT1000_MAG_DSP_TIMER0_INDX 0x1 +#define FT1000_MAG_DSP_TIMER1 0x3FC /* Timer Field from Basestation */ +#define FT1000_MAG_DSP_TIMER1_INDX 0x0 +#define FT1000_MAG_DSP_TIMER2 0x3FD /* Timer Field from Basestation */ +#define FT1000_MAG_DSP_TIMER2_INDX 0x1 +#define FT1000_MAG_DSP_TIMER3 0x3FD /* Timer Field from Basestation */ +#define FT1000_MAG_DSP_TIMER3_INDX 0x0 +#define FT1000_MAG_TOTAL_LEN 0x200 +#define FT1000_MAG_TOTAL_LEN_INDX 0x1 +#define FT1000_MAG_PH_LEN 0x200 +#define FT1000_MAG_PH_LEN_INDX 0x0 +#define FT1000_MAG_PORT_ID 0x201 +#define FT1000_MAG_PORT_ID_INDX 0x0 + +#define HOST_INTF_LE 0x0 /* Host interface little endian mode */ +#define HOST_INTF_BE 0x1 /* Host interface big endian mode */ + +/* FT1000 to Host Doorbell assignments */ +#define FT1000_DB_DPRAM_RX 0x0001 /* this value indicates that DSP has data for host in DPRAM */ +#define FT1000_DB_DNLD_RX 0x0002 /* Downloader handshake doorbell */ +#define FT1000_ASIC_RESET_REQ 0x0004 /* DSP requesting host to reset the ASIC */ +#define FT1000_DSP_ASIC_RESET 0x0008 /* DSP indicating host that it will reset the ASIC */ +#define FT1000_DB_COND_RESET 0x0010 /* DSP request for a card reset. */ + +/* Host to FT1000 Doorbell assignments */ +#define FT1000_DB_DPRAM_TX 0x0100 /* this value indicates that host has data for DSP in DPRAM. */ +#define FT1000_DB_DNLD_TX 0x0200 /* Downloader handshake doorbell */ +#define FT1000_ASIC_RESET_DSP 0x0400 /* Responds to FT1000_ASIC_RESET_REQ */ +#define FT1000_DB_HB 0x1000 /* Indicates that supervisor has a heartbeat message for DSP. */ + +#define hi 0x6869 /* PC Card heartbeat values */ +#define ho 0x686f /* PC Card heartbeat values */ + +/* Magnemite specific defines */ +#define hi_mag 0x6968 /* Byte swap hi to avoid additional system call */ +#define ho_mag 0x6f68 /* Byte swap ho to avoid additional system call */ + +/* Bit field definitions for Host Interrupt Status Register */ +/* Indicate the cause of an interrupt. */ +#define ISR_EMPTY 0x00 /* no bits set */ +#define ISR_DOORBELL_ACK 0x01 /* Doorbell acknowledge from DSP */ +#define ISR_DOORBELL_PEND 0x02 /* Doorbell pending from DSP */ +#define ISR_RCV 0x04 /* Packet available in Downlink FIFO */ +#define ISR_WATERMARK 0x08 /* Watermark requirements satisfied */ + +/* Bit field definition for Host Interrupt Mask */ +#define ISR_MASK_NONE 0x0000 /* no bits set */ +#define ISR_MASK_DOORBELL_ACK 0x0001 /* Doorbell acknowledge mask */ +#define ISR_MASK_DOORBELL_PEND 0x0002 /* Doorbell pending mask */ +#define ISR_MASK_RCV 0x0004 /* Downlink Packet available mask */ +#define ISR_MASK_WATERMARK 0x0008 /* Watermark interrupt mask */ +#define ISR_MASK_ALL 0xffff /* Mask all interrupts */ +/* Default interrupt mask (Enable Doorbell pending and Packet available interrupts) */ +#define ISR_DEFAULT_MASK 0x7ff9 + +/* Bit field definition for Host Control Register */ +#define DSP_RESET_BIT 0x0001 /* Bit field to control dsp reset state */ + /* (0 = out of reset 1 = reset) */ +#define ASIC_RESET_BIT 0x0002 /* Bit field to control ASIC reset state */ + /* (0 = out of reset 1 = reset) */ +#define DSP_UNENCRYPTED 0x0004 +#define DSP_ENCRYPTED 0x0008 +#define EFUSE_MEM_DISABLE 0x0040 + +/* Application specific IDs */ +#define DSPID 0x20 +#define HOSTID 0x10 +#define DSPAIRID 0x90 +#define DRIVERID 0x00 +#define NETWORKID 0x20 + +/* Size of DPRAM Message */ +#define MAX_CMD_SQSIZE 1780 + +#define ENET_MAX_SIZE 1514 +#define ENET_HEADER_SIZE 14 + +#define SLOWQ_TYPE 0 +#define FASTQ_TYPE 1 + +#define MAX_DSP_SESS_REC 1024 + +#define DSP_QID_OFFSET 4 + +/* Driver message types */ +#define MEDIA_STATE 0x0010 +#define TIME_UPDATE 0x0020 +#define DSP_PROVISION 0x0030 +#define DSP_INIT_MSG 0x0050 +#define DSP_HIBERNATE 0x0060 +#define DSP_STORE_INFO 0x0070 +#define DSP_GET_INFO 0x0071 +#define GET_DRV_ERR_RPT_MSG 0x0073 +#define RSP_DRV_ERR_RPT_MSG 0x0074 + +/* Driver Error Messages for DSP */ +#define DSP_HB_INFO 0x7ef0 +#define DSP_FIFO_INFO 0x7ef1 +#define DSP_CONDRESET_INFO 0x7ef2 +#define DSP_CMDLEN_INFO 0x7ef3 +#define DSP_CMDPHCKSUM_INFO 0x7ef4 +#define DSP_PKTPHCKSUM_INFO 0x7ef5 +#define DSP_PKTLEN_INFO 0x7ef6 +#define DSP_USER_RESET 0x7ef7 +#define FIFO_FLUSH_MAXLIMIT 0x7ef8 +#define FIFO_FLUSH_BADCNT 0x7ef9 +#define FIFO_ZERO_LEN 0x7efa + +/* Pseudo Header structure */ +struct pseudo_hdr { + unsigned short length; /* length of msg body */ + unsigned char source; /* hardware source id */ + /* Host = 0x10 */ + /* Dsp = 0x20 */ + unsigned char destination; /* hardware destination id (refer to source) */ + unsigned char portdest; /* software destination port id */ + /* Host = 0x00 */ + /* Applicaton Broadcast = 0x10 */ + /* Network Stack = 0x20 */ + /* Dsp OAM = 0x80 */ + /* Dsp Airlink = 0x90 */ + /* Dsp Loader = 0xa0 */ + /* Dsp MIP = 0xb0 */ + unsigned char portsrc; /* software source port id (refer to portdest) */ + unsigned short sh_str_id; /* not used */ + unsigned char control; /* not used */ + unsigned char rsvd1; + unsigned char seq_num; /* message sequence number */ + unsigned char rsvd2; + unsigned short qos_class; /* not used */ + unsigned short checksum; /* pseudo header checksum */ +} __packed; + +struct drv_msg { + struct pseudo_hdr pseudo; + u16 type; + u16 length; + u8 data[0]; +} __packed; + +struct media_msg { + struct pseudo_hdr pseudo; + u16 type; + u16 length; + u16 state; + u32 ip_addr; + u32 net_mask; + u32 gateway; + u32 dns_1; + u32 dns_2; +} __packed; + +struct dsp_init_msg { + struct pseudo_hdr pseudo; + u16 type; + u16 length; + u8 DspVer[DSPVERSZ]; /* DSP version number */ + u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */ + u8 Sku[SKUSZ]; /* SKU */ + u8 eui64[EUISZ]; /* EUI64 */ + u8 ProductMode[MODESZ]; /* Product Mode (Market/Production) */ + u8 RfCalVer[CALVERSZ]; /* Rf Calibration version */ + u8 RfCalDate[CALDATESZ]; /* Rf Calibration date */ +} __packed; + +struct prov_record { + struct list_head list; + u8 *pprov_data; +}; |