diff options
author | Lukas Wunner <lukas@wunner.de> | 2020-05-12 14:40:02 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-05-15 14:47:05 +0200 |
commit | c150c0f362c1e51c0e3216c9912b85b71d00e70d (patch) | |
tree | c0cefb23cc8355ab56cf9c988d9d475d739e7247 /drivers/tty/serial/fsl_lpuart.c | |
parent | e0a851fe6b9b619527bd928aa93caaddd003f70c (diff) | |
download | linux-stable-c150c0f362c1e51c0e3216c9912b85b71d00e70d.tar.gz linux-stable-c150c0f362c1e51c0e3216c9912b85b71d00e70d.tar.bz2 linux-stable-c150c0f362c1e51c0e3216c9912b85b71d00e70d.zip |
serial: Allow uart_get_rs485_mode() to return errno
We're about to amend uart_get_rs485_mode() to support a GPIO pin for
rs485 bus termination. Retrieving the GPIO descriptor may fail, so
allow uart_get_rs485_mode() to return an errno and change all callers
to check for failure.
The GPIO descriptor is going to be stored in struct uart_port. Pass
that struct to uart_get_rs485_mode() in lieu of a struct device and
struct serial_rs485, both of which are directly accessible from struct
uart_port.
A few drivers call uart_get_rs485_mode() before setting the struct
device pointer in struct uart_port. Shuffle those calls around where
necessary.
[Heiko Stuebner did the ar933x_uart.c portion, hence his Signed-off-by.]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/271e814af4b0db3bffbbb74abf2b46b75add4516.1589285873.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 6a9909e56449..029324c77cd7 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2619,7 +2619,9 @@ static int lpuart_probe(struct platform_device *pdev) if (ret) goto failed_attach_port; - uart_get_rs485_mode(&pdev->dev, &sport->port.rs485); + ret = uart_get_rs485_mode(&sport->port); + if (ret) + goto failed_get_rs485; if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) dev_err(&pdev->dev, "driver doesn't support RX during TX\n"); @@ -2632,6 +2634,7 @@ static int lpuart_probe(struct platform_device *pdev) return 0; +failed_get_rs485: failed_attach_port: failed_irq_request: lpuart_disable_clks(sport); |