summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorStephen Boyd <sboyd@codeaurora.org>2015-03-13 11:09:36 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-03-26 22:31:09 +0100
commit0fea53e255eaa889fb6cf8e10d11fbea2921eac8 (patch)
treee9df44d240d46cb4a73c528ff8168fbf5157d13d /drivers/tty
parente23407d8b3e4b3011520e5140322fddd34172173 (diff)
downloadlinux-stable-0fea53e255eaa889fb6cf8e10d11fbea2921eac8.tar.gz
linux-stable-0fea53e255eaa889fb6cf8e10d11fbea2921eac8.tar.bz2
linux-stable-0fea53e255eaa889fb6cf8e10d11fbea2921eac8.zip
tty: serial: Remove orphaned serial driver
This driver is orphaned now that mach-msm has been removed. Delete it. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/Kconfig12
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/msm_serial_hs.c1874
3 files changed, 0 insertions, 1887 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 04d7a96c7cf9..79ae58682adc 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1053,18 +1053,6 @@ config SERIAL_MSM_CONSOLE
select SERIAL_CORE_CONSOLE
select SERIAL_EARLYCON
-config SERIAL_MSM_HS
- tristate "MSM UART High Speed: Serial Driver"
- depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
- select SERIAL_CORE
- help
- If you have a machine based on MSM family of SoCs, you
- can enable its onboard high speed serial port by enabling
- this option.
-
- Choose M here to compile it as a module. The module will be
- called msm_serial_hs.
-
config SERIAL_VT8500
bool "VIA VT8500 on-chip serial port support"
depends on ARCH_VT8500
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index f42b4f9845df..c3ac3d930b33 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -62,7 +62,6 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
-obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
deleted file mode 100644
index 62da8534ba75..000000000000
--- a/drivers/tty/serial/msm_serial_hs.c
+++ /dev/null
@@ -1,1874 +0,0 @@
-/*
- * MSM 7k/8k High speed uart driver
- *
- * Copyright (c) 2007-2011, Code Aurora Forum. All rights reserved.
- * Copyright (c) 2008 Google Inc.
- * Modified: Nick Pelly <npelly@google.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * Has optional support for uart power management independent of linux
- * suspend/resume:
- *
- * RX wakeup.
- * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the
- * UART RX pin). This should only be used if there is not a wakeup
- * GPIO on the UART CTS, and the first RX byte is known (for example, with the
- * Bluetooth Texas Instruments HCILL protocol), since the first RX byte will
- * always be lost. RTS will be asserted even while the UART is off in this mode
- * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq.
- */
-
-#include <linux/module.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <linux/platform_data/msm_serial_hs.h>
-
-/* HSUART Registers */
-#define UARTDM_MR1_ADDR 0x0
-#define UARTDM_MR2_ADDR 0x4
-
-/* Data Mover result codes */
-#define RSLT_FIFO_CNTR_BMSK (0xE << 28)
-#define RSLT_VLD BIT(1)
-
-/* write only register */
-#define UARTDM_CSR_ADDR 0x8
-#define UARTDM_CSR_115200 0xFF
-#define UARTDM_CSR_57600 0xEE
-#define UARTDM_CSR_38400 0xDD
-#define UARTDM_CSR_28800 0xCC
-#define UARTDM_CSR_19200 0xBB
-#define UARTDM_CSR_14400 0xAA
-#define UARTDM_CSR_9600 0x99
-#define UARTDM_CSR_7200 0x88
-#define UARTDM_CSR_4800 0x77
-#define UARTDM_CSR_3600 0x66
-#define UARTDM_CSR_2400 0x55
-#define UARTDM_CSR_1200 0x44
-#define UARTDM_CSR_600 0x33
-#define UARTDM_CSR_300 0x22
-#define UARTDM_CSR_150 0x11
-#define UARTDM_CSR_75 0x00
-
-/* write only register */
-#define UARTDM_TF_ADDR 0x70
-#define UARTDM_TF2_ADDR 0x74
-#define UARTDM_TF3_ADDR 0x78
-#define UARTDM_TF4_ADDR 0x7C
-
-/* write only register */
-#define UARTDM_CR_ADDR 0x10
-#define UARTDM_IMR_ADDR 0x14
-
-#define UARTDM_IPR_ADDR 0x18
-#define UARTDM_TFWR_ADDR 0x1c
-#define UARTDM_RFWR_ADDR 0x20
-#define UARTDM_HCR_ADDR 0x24
-#define UARTDM_DMRX_ADDR 0x34
-#define UARTDM_IRDA_ADDR 0x38
-#define UARTDM_DMEN_ADDR 0x3c
-
-/* UART_DM_NO_CHARS_FOR_TX */
-#define UARTDM_NCF_TX_ADDR 0x40
-
-#define UARTDM_BADR_ADDR 0x44
-
-#define UARTDM_SIM_CFG_ADDR 0x80
-/* Read Only register */
-#define UARTDM_SR_ADDR 0x8
-
-/* Read Only register */
-#define UARTDM_RF_ADDR 0x70
-#define UARTDM_RF2_ADDR 0x74
-#define UARTDM_RF3_ADDR 0x78
-#define UARTDM_RF4_ADDR 0x7C
-
-/* Read Only register */
-#define UARTDM_MISR_ADDR 0x10
-
-/* Read Only register */
-#define UARTDM_ISR_ADDR 0x14
-#define UARTDM_RX_TOTAL_SNAP_ADDR 0x38
-
-#define UARTDM_RXFS_ADDR 0x50
-
-/* Register field Mask Mapping */
-#define UARTDM_SR_PAR_FRAME_BMSK BIT(5)
-#define UARTDM_SR_OVERRUN_BMSK BIT(4)
-#define UARTDM_SR_TXEMT_BMSK BIT(3)
-#define UARTDM_SR_TXRDY_BMSK BIT(2)
-#define UARTDM_SR_RXRDY_BMSK BIT(0)
-
-#define UARTDM_CR_TX_DISABLE_BMSK BIT(3)
-#define UARTDM_CR_RX_DISABLE_BMSK BIT(1)
-#define UARTDM_CR_TX_EN_BMSK BIT(2)
-#define UARTDM_CR_RX_EN_BMSK BIT(0)
-
-/* UARTDM_CR channel_comman bit value (register field is bits 8:4) */
-#define RESET_RX 0x10
-#define RESET_TX 0x20
-#define RESET_ERROR_STATUS 0x30
-#define RESET_BREAK_INT 0x40
-#define START_BREAK 0x50
-#define STOP_BREAK 0x60
-#define RESET_CTS 0x70
-#define RESET_STALE_INT 0x80
-#define RFR_LOW 0xD0
-#define RFR_HIGH 0xE0
-#define CR_PROTECTION_EN 0x100
-#define STALE_EVENT_ENABLE 0x500
-#define STALE_EVENT_DISABLE 0x600
-#define FORCE_STALE_EVENT 0x400
-#define CLEAR_TX_READY 0x300
-#define RESET_TX_ERROR 0x800
-#define RESET_TX_DONE 0x810
-
-#define UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00
-#define UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f
-#define UARTDM_MR1_CTS_CTL_BMSK 0x40
-#define UARTDM_MR1_RX_RDY_CTL_BMSK 0x80
-
-#define UARTDM_MR2_ERROR_MODE_BMSK 0x40
-#define UARTDM_MR2_BITS_PER_CHAR_BMSK 0x30
-
-/* bits per character configuration */
-#define FIVE_BPC (0 << 4)
-#define SIX_BPC (1 << 4)
-#define SEVEN_BPC (2 << 4)
-#define EIGHT_BPC (3 << 4)
-
-#define UARTDM_MR2_STOP_BIT_LEN_BMSK 0xc
-#define STOP_BIT_ONE (1 << 2)
-#define STOP_BIT_TWO (3 << 2)
-
-#define UARTDM_MR2_PARITY_MODE_BMSK 0x3
-
-/* Parity configuration */
-#define NO_PARITY 0x0
-#define EVEN_PARITY 0x1
-#define ODD_PARITY 0x2
-#define SPACE_PARITY 0x3
-
-#define UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80
-#define UARTDM_IPR_STALE_LSB_BMSK 0x1f
-
-/* These can be used for both ISR and IMR register */
-#define UARTDM_ISR_TX_READY_BMSK BIT(7)
-#define UARTDM_ISR_CURRENT_CTS_BMSK BIT(6)
-#define UARTDM_ISR_DELTA_CTS_BMSK BIT(5)
-#define UARTDM_ISR_RXLEV_BMSK BIT(4)
-#define UARTDM_ISR_RXSTALE_BMSK BIT(3)
-#define UARTDM_ISR_RXBREAK_BMSK BIT(2)
-#define UARTDM_ISR_RXHUNT_BMSK BIT(1)
-#define UARTDM_ISR_TXLEV_BMSK BIT(0)
-
-/* Field definitions for UART_DM_DMEN*/
-#define UARTDM_TX_DM_EN_BMSK 0x1
-#define UARTDM_RX_DM_EN_BMSK 0x2
-
-#define UART_FIFOSIZE 64
-#define UARTCLK 7372800
-
-/* Rx DMA request states */
-enum flush_reason {
- FLUSH_NONE,
- FLUSH_DATA_READY,
- FLUSH_DATA_INVALID, /* values after this indicate invalid data */
- FLUSH_IGNORE = FLUSH_DATA_INVALID,
- FLUSH_STOP,
- FLUSH_SHUTDOWN,
-};
-
-/* UART clock states */
-enum msm_hs_clk_states_e {
- MSM_HS_CLK_PORT_OFF, /* port not in use */
- MSM_HS_CLK_OFF, /* clock disabled */
- MSM_HS_CLK_REQUEST_OFF, /* disable after TX and RX flushed */
- MSM_HS_CLK_ON, /* clock enabled */
-};
-
-/* Track the forced RXSTALE flush during clock off sequence.
- * These states are only valid during MSM_HS_CLK_REQUEST_OFF */
-enum msm_hs_clk_req_off_state_e {
- CLK_REQ_OFF_START,
- CLK_REQ_OFF_RXSTALE_ISSUED,
- CLK_REQ_OFF_FLUSH_ISSUED,
- CLK_REQ_OFF_RXSTALE_FLUSHED,
-};
-
-/**
- * struct msm_hs_tx
- * @tx_ready_int_en: ok to dma more tx?
- * @dma_in_flight: tx dma in progress
- * @xfer: top level DMA command pointer structure
- * @command_ptr: third level command struct pointer
- * @command_ptr_ptr: second level command list struct pointer
- * @mapped_cmd_ptr: DMA view of third level command struct
- * @mapped_cmd_ptr_ptr: DMA view of second level command list struct
- * @tx_count: number of bytes to transfer in DMA transfer
- * @dma_base: DMA view of UART xmit buffer
- *
- * This structure describes a single Tx DMA transaction. MSM DMA
- * commands have two levels of indirection. The top level command
- * ptr points to a list of command ptr which in turn points to a
- * single DMA 'command'. In our case each Tx transaction consists
- * of a single second level pointer pointing to a 'box type' command.
- */
-struct msm_hs_tx {
- unsigned int tx_ready_int_en;
- unsigned int dma_in_flight;
- struct msm_dmov_cmd xfer;
- dmov_box *command_ptr;
- u32 *command_ptr_ptr;
- dma_addr_t mapped_cmd_ptr;
- dma_addr_t mapped_cmd_ptr_ptr;
- int tx_count;
- dma_addr_t dma_base;
-};
-
-/**
- * struct msm_hs_rx
- * @flush: Rx DMA request state
- * @xfer: top level DMA command pointer structure
- * @cmdptr_dmaaddr: DMA view of second level command structure
- * @command_ptr: third level DMA command pointer structure
- * @command_ptr_ptr: second level DMA command list pointer
- * @mapped_cmd_ptr: DMA view of the third level command structure
- * @wait: wait for DMA completion before shutdown
- * @buffer: destination buffer for RX DMA
- * @rbuffer: DMA view of buffer
- * @pool: dma pool out of which coherent rx buffer is allocated
- * @tty_work: private work-queue for tty flip buffer push task
- *
- * This structure describes a single Rx DMA transaction. Rx DMA
- * transactions use box mode DMA commands.
- */
-struct msm_hs_rx {
- enum flush_reason flush;
- struct msm_dmov_cmd xfer;
- dma_addr_t cmdptr_dmaaddr;
- dmov_box *command_ptr;
- u32 *command_ptr_ptr;
- dma_addr_t mapped_cmd_ptr;
- wait_queue_head_t wait;
- dma_addr_t rbuffer;
- unsigned char *buffer;
- struct dma_pool *pool;
- struct work_struct tty_work;
-};
-
-/**
- * struct msm_hs_rx_wakeup
- * @irq: IRQ line to be configured as interrupt source on Rx activity
- * @ignore: boolean value. 1 = ignore the wakeup interrupt
- * @rx_to_inject: extra character to be inserted to Rx tty on wakeup
- * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character
- *
- * This is an optional structure required for UART Rx GPIO IRQ based
- * wakeup from low power state. UART wakeup can be triggered by RX activity
- * (using a wakeup GPIO on the UART RX pin). This should only be used if
- * there is not a wakeup GPIO on the UART CTS, and the first RX byte is
- * known (eg., with the Bluetooth Texas Instruments HCILL protocol),
- * since the first RX byte will always be lost. RTS will be asserted even
- * while the UART is clocked off in this mode of operation.
- */
-struct msm_hs_rx_wakeup {
- int irq; /* < 0 indicates low power wakeup disabled */
- unsigned char ignore;
- unsigned char inject_rx;
- char rx_to_inject;
-};
-
-/**
- * struct msm_hs_port
- * @uport: embedded uart port structure
- * @imr_reg: shadow value of UARTDM_IMR
- * @clk: uart input clock handle
- * @tx: Tx transaction related data structure
- * @rx: Rx transaction related data structure
- * @dma_tx_channel: Tx DMA command channel
- * @dma_rx_channel Rx DMA command channel
- * @dma_tx_crci: Tx channel rate control interface number
- * @dma_rx_crci: Rx channel rate control interface number
- * @clk_off_timer: Timer to poll DMA event completion before clock off
- * @clk_off_delay: clk_off_timer poll interval
- * @clk_state: overall clock state
- * @clk_req_off_state: post flush clock states
- * @rx_wakeup: optional rx_wakeup feature related data
- * @exit_lpm_cb: optional callback to exit low power mode
- *
- * Low level serial port structure.
- */
-struct msm_hs_port {
- struct uart_port uport;
- unsigned long imr_reg;
- struct clk *clk;
- struct msm_hs_tx tx;
- struct msm_hs_rx rx;
-
- int dma_tx_channel;
- int dma_rx_channel;
- int dma_tx_crci;
- int dma_rx_crci;
-
- struct hrtimer clk_off_timer;
- ktime_t clk_off_delay;
- enum msm_hs_clk_states_e clk_state;
- enum msm_hs_clk_req_off_state_e clk_req_off_state;
-
- struct msm_hs_rx_wakeup rx_wakeup;
- void (*exit_lpm_cb)(struct uart_port *);
-};
-
-#define MSM_UARTDM_BURST_SIZE 16 /* DM burst size (in bytes) */
-#define UARTDM_TX_BUF_SIZE UART_XMIT_SIZE
-#define UARTDM_RX_BUF_SIZE 512
-
-#define UARTDM_NR 2
-
-static struct msm_hs_port q_uart_port[UARTDM_NR];
-static struct platform_driver msm_serial_hs_platform_driver;
-static struct uart_driver msm_hs_driver;
-static struct uart_ops msm_hs_ops;
-static struct workqueue_struct *msm_hs_workqueue;
-
-#define UARTDM_TO_MSM(uart_port) \
- container_of((uart_port), struct msm_hs_port, uport)
-
-static unsigned int use_low_power_rx_wakeup(struct msm_hs_port
- *msm_uport)
-{
- return (msm_uport->rx_wakeup.irq >= 0);
-}
-
-static unsigned int msm_hs_read(struct uart_port *uport,
- unsigned int offset)
-{
- return ioread32(uport->membase + offset);
-}
-
-static void msm_hs_write(struct uart_port *uport, unsigned int offset,
- unsigned int value)
-{
- iowrite32(value, uport->membase + offset);
-}
-
-static void msm_hs_release_port(struct uart_port *port)
-{
- iounmap(port->membase);
-}
-
-static int msm_hs_request_port(struct uart_port *port)
-{
- port->membase = ioremap(port->mapbase, PAGE_SIZE);
- if (unlikely(!port->membase))
- return -ENOMEM;
-
- /* configure the CR Protection to Enable */
- msm_hs_write(port, UARTDM_CR_ADDR, CR_PROTECTION_EN);
- return 0;
-}
-
-static int msm_hs_remove(struct platform_device *pdev)
-{
-
- struct msm_hs_port *msm_uport;
- struct device *dev;
-
- if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
- printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
- return -EINVAL;
- }
-
- msm_uport = &q_uart_port[pdev->id];
- dev = msm_uport->uport.dev;
-
- dma_unmap_single(dev, msm_uport->rx.mapped_cmd_ptr, sizeof(dmov_box),
- DMA_TO_DEVICE);
- dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
- msm_uport->rx.rbuffer);
- dma_pool_destroy(msm_uport->rx.pool);
-
- dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32),
- DMA_TO_DEVICE);
- dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32),
- DMA_TO_DEVICE);
- dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box),
- DMA_TO_DEVICE);
-
- uart_remove_one_port(&msm_hs_driver, &msm_uport->uport);
- clk_put(msm_uport->clk);
-
- /* Free the tx resources */
- kfree(msm_uport->tx.command_ptr);
- kfree(msm_uport->tx.command_ptr_ptr);
-
- /* Free the rx resources */
- kfree(msm_uport->rx.command_ptr);
- kfree(msm_uport->rx.command_ptr_ptr);
-
- iounmap(msm_uport->uport.membase);
-
- return 0;
-}
-
-static int msm_hs_init_clk_locked(struct uart_port *uport)
-{
- int ret;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- ret = clk_enable(msm_uport->clk);
- if (ret) {
- printk(KERN_ERR "Error could not turn on UART clk\n");
- return ret;
- }
-
- /* Set up the MREG/NREG/DREG/MNDREG */
- ret = clk_set_rate(msm_uport->clk, uport->uartclk);
- if (ret) {
- printk(KERN_WARNING "Error setting clock rate on UART\n");
- clk_disable(msm_uport->clk);
- return ret;
- }
-
- msm_uport->clk_state = MSM_HS_CLK_ON;
- return 0;
-}
-
-/* Enable and Disable clocks (Used for power management) */
-static void msm_hs_pm(struct uart_port *uport, unsigned int state,
- unsigned int oldstate)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- if (use_low_power_rx_wakeup(msm_uport) ||
- msm_uport->exit_lpm_cb)
- return; /* ignore linux PM states,
- use msm_hs_request_clock API */
-
- switch (state) {
- case 0:
- clk_enable(msm_uport->clk);
- break;
- case 3:
- clk_disable(msm_uport->clk);
- break;
- default:
- dev_err(uport->dev, "msm_serial: Unknown PM state %d\n",
- state);
- }
-}
-
-/*
- * programs the UARTDM_CSR register with correct bit rates
- *
- * Interrupts should be disabled before we are called, as
- * we modify Set Baud rate
- * Set receive stale interrupt level, dependent on Bit Rate
- * Goal is to have around 8 ms before indicate stale.
- * roundup (((Bit Rate * .008) / 10) + 1
- */
-static void msm_hs_set_bps_locked(struct uart_port *uport,
- unsigned int bps)
-{
- unsigned long rxstale;
- unsigned long data;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- switch (bps) {
- case 300:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_75);
- rxstale = 1;
- break;
- case 600:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_150);
- rxstale = 1;
- break;
- case 1200:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_300);
- rxstale = 1;
- break;
- case 2400:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_600);
- rxstale = 1;
- break;
- case 4800:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_1200);
- rxstale = 1;
- break;
- case 9600:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
- rxstale = 2;
- break;
- case 14400:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_3600);
- rxstale = 3;
- break;
- case 19200:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_4800);
- rxstale = 4;
- break;
- case 28800:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_7200);
- rxstale = 6;
- break;
- case 38400:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_9600);
- rxstale = 8;
- break;
- case 57600:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_14400);
- rxstale = 16;
- break;
- case 76800:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_19200);
- rxstale = 16;
- break;
- case 115200:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_28800);
- rxstale = 31;
- break;
- case 230400:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_57600);
- rxstale = 31;
- break;
- case 460800:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
- rxstale = 31;
- break;
- case 4000000:
- case 3686400:
- case 3200000:
- case 3500000:
- case 3000000:
- case 2500000:
- case 1500000:
- case 1152000:
- case 1000000:
- case 921600:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200);
- rxstale = 31;
- break;
- default:
- msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400);
- /* default to 9600 */
- bps = 9600;
- rxstale = 2;
- break;
- }
- if (bps > 460800)
- uport->uartclk = bps * 16;
- else
- uport->uartclk = UARTCLK;
-
- if (clk_set_rate(msm_uport->clk, uport->uartclk)) {
- printk(KERN_WARNING "Error setting clock rate on UART\n");
- return;
- }
-
- data = rxstale & UARTDM_IPR_STALE_LSB_BMSK;
- data |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2);
-
- msm_hs_write(uport, UARTDM_IPR_ADDR, data);
-}
-
-/*
- * termios : new ktermios
- * oldtermios: old ktermios previous setting
- *
- * Configure the serial port
- */
-static void msm_hs_set_termios(struct uart_port *uport,
- struct ktermios *termios,
- struct ktermios *oldtermios)
-{
- unsigned int bps;
- unsigned long data;
- unsigned long flags;
- unsigned int c_cflag = termios->c_cflag;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- spin_lock_irqsave(&uport->lock, flags);
- clk_enable(msm_uport->clk);
-
- /* 300 is the minimum baud support by the driver */
- bps = uart_get_baud_rate(uport, termios, oldtermios, 200, 4000000);
-
- /* Temporary remapping 200 BAUD to 3.2 mbps */
- if (bps == 200)
- bps = 3200000;
-
- msm_hs_set_bps_locked(uport, bps);
-
- data = msm_hs_read(uport, UARTDM_MR2_ADDR);
- data &= ~UARTDM_MR2_PARITY_MODE_BMSK;
- /* set parity */
- if (PARENB == (c_cflag & PARENB)) {
- if (PARODD == (c_cflag & PARODD))
- data |= ODD_PARITY;
- else if (CMSPAR == (c_cflag & CMSPAR))
- data |= SPACE_PARITY;
- else
- data |= EVEN_PARITY;
- }
-
- /* Set bits per char */
- data &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK;
-
- switch (c_cflag & CSIZE) {
- case CS5:
- data |= FIVE_BPC;
- break;
- case CS6:
- data |= SIX_BPC;
- break;
- case CS7:
- data |= SEVEN_BPC;
- break;
- default:
- data |= EIGHT_BPC;
- break;
- }
- /* stop bits */
- if (c_cflag & CSTOPB) {
- data |= STOP_BIT_TWO;
- } else {
- /* otherwise 1 stop bit */
- data |= STOP_BIT_ONE;
- }
- data |= UARTDM_MR2_ERROR_MODE_BMSK;
- /* write parity/bits per char/stop bit configuration */
- msm_hs_write(uport, UARTDM_MR2_ADDR, data);
-
- /* Configure HW flow control */
- data = msm_hs_read(uport, UARTDM_MR1_ADDR);
-
- data &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK);
-
- if (c_cflag & CRTSCTS) {
- data |= UARTDM_MR1_CTS_CTL_BMSK;
- data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
- }
-
- msm_hs_write(uport, UARTDM_MR1_ADDR, data);
-
- uport->ignore_status_mask = termios->c_iflag & INPCK;
- uport->ignore_status_mask |= termios->c_iflag & IGNPAR;
- uport->read_status_mask = (termios->c_cflag & CREAD);
-
- msm_hs_write(uport, UARTDM_IMR_ADDR, 0);
-
- /* Set Transmit software time out */
- uart_update_timeout(uport, c_cflag, bps);
-
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
-
- if (msm_uport->rx.flush == FLUSH_NONE) {
- msm_uport->rx.flush = FLUSH_IGNORE;
- msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
- }
-
- msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
-
- clk_disable(msm_uport->clk);
- spin_unlock_irqrestore(&uport->lock, flags);
-}
-
-/*
- * Standard API, Transmitter
- * Any character in the transmit shift register is sent
- */
-static unsigned int msm_hs_tx_empty(struct uart_port *uport)
-{
- unsigned int data;
- unsigned int ret = 0;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- clk_enable(msm_uport->clk);
-
- data = msm_hs_read(uport, UARTDM_SR_ADDR);
- if (data & UARTDM_SR_TXEMT_BMSK)
- ret = TIOCSER_TEMT;
-
- clk_disable(msm_uport->clk);
-
- return ret;
-}
-
-/*
- * Standard API, Stop transmitter.
- * Any character in the transmit shift register is sent as
- * well as the current data mover transfer .
- */
-static void msm_hs_stop_tx_locked(struct uart_port *uport)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- msm_uport->tx.tx_ready_int_en = 0;
-}
-
-/*
- * Standard API, Stop receiver as soon as possible.
- *
- * Function immediately terminates the operation of the
- * channel receiver and any incoming characters are lost. None
- * of the receiver status bits are affected by this command and
- * characters that are already in the receive FIFO there.
- */
-static void msm_hs_stop_rx_locked(struct uart_port *uport)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
- unsigned int data;
-
- clk_enable(msm_uport->clk);
-
- /* disable dlink */
- data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
- data &= ~UARTDM_RX_DM_EN_BMSK;
- msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
-
- /* Disable the receiver */
- if (msm_uport->rx.flush == FLUSH_NONE)
- msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
-
- if (msm_uport->rx.flush != FLUSH_SHUTDOWN)
- msm_uport->rx.flush = FLUSH_STOP;
-
- clk_disable(msm_uport->clk);
-}
-
-/* Transmit the next chunk of data */
-static void msm_hs_submit_tx_locked(struct uart_port *uport)
-{
- int left;
- int tx_count;
- dma_addr_t src_addr;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
- struct msm_hs_tx *tx = &msm_uport->tx;
- struct circ_buf *tx_buf = &msm_uport->uport.state->xmit;
-
- if (uart_circ_empty(tx_buf) || uport->state->port.tty->stopped) {
- msm_hs_stop_tx_locked(uport);
- return;
- }
-
- tx->dma_in_flight = 1;
-
- tx_count = uart_circ_chars_pending(tx_buf);
-
- if (UARTDM_TX_BUF_SIZE < tx_count)
- tx_count = UARTDM_TX_BUF_SIZE;
-
- left = UART_XMIT_SIZE - tx_buf->tail;
-
- if (tx_count > left)
- tx_count = left;
-
- src_addr = tx->dma_base + tx_buf->tail;
- dma_sync_single_for_device(uport->dev, src_addr, tx_count,
- DMA_TO_DEVICE);
-
- tx->command_ptr->num_rows = (((tx_count + 15) >> 4) << 16) |
- ((tx_count + 15) >> 4);
- tx->command_ptr->src_row_addr = src_addr;
-
- dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr,
- sizeof(dmov_box), DMA_TO_DEVICE);
-
- *tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr);
-
- dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr,
- sizeof(u32), DMA_TO_DEVICE);
-
- /* Save tx_count to use in Callback */
- tx->tx_count = tx_count;
- msm_hs_write(uport, UARTDM_NCF_TX_ADDR, tx_count);
-
- /* Disable the tx_ready interrupt */
- msm_uport->imr_reg &= ~UARTDM_ISR_TX_READY_BMSK;
- msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
- msm_dmov_enqueue_cmd(msm_uport->dma_tx_channel, &tx->xfer);
-}
-
-/* Start to receive the next chunk of data */
-static void msm_hs_start_rx_locked(struct uart_port *uport)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
- msm_hs_write(uport, UARTDM_DMRX_ADDR, UARTDM_RX_BUF_SIZE);
- msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_ENABLE);
- msm_uport->imr_reg |= UARTDM_ISR_RXLEV_BMSK;
- msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
-
- msm_uport->rx.flush = FLUSH_NONE;
- msm_dmov_enqueue_cmd(msm_uport->dma_rx_channel, &msm_uport->rx.xfer);
-
- /* might have finished RX and be ready to clock off */
- hrtimer_start(&msm_uport->clk_off_timer, msm_uport->clk_off_delay,
- HRTIMER_MODE_REL);
-}
-
-/* Enable the transmitter Interrupt */
-static void msm_hs_start_tx_locked(struct uart_port *uport)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- clk_enable(msm_uport->clk);
-
- if (msm_uport->exit_lpm_cb)
- msm_uport->exit_lpm_cb(uport);
-
- if (msm_uport->tx.tx_ready_int_en == 0) {
- msm_uport->tx.tx_ready_int_en = 1;
- msm_hs_submit_tx_locked(uport);
- }
-
- clk_disable(msm_uport->clk);
-}
-
-/*
- * This routine is called when we are done with a DMA transfer
- *
- * This routine is registered with Data mover when we set
- * up a Data Mover transfer. It is called from Data mover ISR
- * when the DMA transfer is done.
- */
-static void msm_hs_dmov_tx_callback(struct msm_dmov_cmd *cmd_ptr,
- unsigned int result,
- struct msm_dmov_errdata *err)
-{
- unsigned long flags;
- struct msm_hs_port *msm_uport;
-
- /* DMA did not finish properly */
- WARN_ON((((result & RSLT_FIFO_CNTR_BMSK) >> 28) == 1) &&
- !(result & RSLT_VLD));
-
- msm_uport = container_of(cmd_ptr, struct msm_hs_port, tx.xfer);
-
- spin_lock_irqsave(&msm_uport->uport.lock, flags);
- clk_enable(msm_uport->clk);
-
- msm_uport->imr_reg |= UARTDM_ISR_TX_READY_BMSK;
- msm_hs_write(&msm_uport->uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
-
- clk_disable(msm_uport->clk);
- spin_unlock_irqrestore(&msm_uport->uport.lock, flags);
-}
-
-/*
- * This routine is called when we are done with a DMA transfer or the
- * a flush has been sent to the data mover driver.
- *
- * This routine is registered with Data mover when we set up a Data Mover
- * transfer. It is called from Data mover ISR when the DMA transfer is done.
- */
-static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr,
- unsigned int result,
- struct msm_dmov_errdata *err)
-{
- int retval;
- int rx_count;
- unsigned long status;
- unsigned int error_f = 0;
- unsigned long flags;
- unsigned int flush;
- struct tty_port *port;
- struct uart_port *uport;
- struct msm_hs_port *msm_uport;
-
- msm_uport = container_of(cmd_ptr, struct msm_hs_port, rx.xfer);
- uport = &msm_uport->uport;
-
- spin_lock_irqsave(&uport->lock, flags);
- clk_enable(msm_uport->clk);
-
- port = &uport->state->port;
-
- msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
-
- status = msm_hs_read(uport, UARTDM_SR_ADDR);
-
- /* overflow is not connect to data in a FIFO */
- if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) &&
- (uport->read_status_mask & CREAD))) {
- tty_insert_flip_char(port, 0, TTY_OVERRUN);
- uport->icount.buf_overrun++;
- error_f = 1;
- }
-
- if (!(uport->ignore_status_mask & INPCK))
- status = status & ~(UARTDM_SR_PAR_FRAME_BMSK);
-
- if (unlikely(status & UARTDM_SR_PAR_FRAME_BMSK)) {
- /* Can not tell difference between parity & frame error */
- uport->icount.parity++;
- error_f = 1;
- if (uport->ignore_status_mask & IGNPAR)
- tty_insert_flip_char(port, 0, TTY_PARITY);
- }
-
- if (error_f)
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
-
- if (msm_uport->clk_req_off_state == CLK_REQ_OFF_FLUSH_ISSUED)
- msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_FLUSHED;
-
- flush = msm_uport->rx.flush;
- if (flush == FLUSH_IGNORE)
- msm_hs_start_rx_locked(uport);
- if (flush == FLUSH_STOP)
- msm_uport->rx.flush = FLUSH_SHUTDOWN;
- if (flush >= FLUSH_DATA_INVALID)
- goto out;
-
- rx_count = msm_hs_read(uport, UARTDM_RX_TOTAL_SNAP_ADDR);
-
- if (0 != (uport->read_status_mask & CREAD)) {
- retval = tty_insert_flip_string(port, msm_uport->rx.buffer,
- rx_count);
- BUG_ON(retval != rx_count);
- }
-
- msm_hs_start_rx_locked(uport);
-
-out:
- clk_disable(msm_uport->clk);
-
- spin_unlock_irqrestore(&uport->lock, flags);
-
- if (flush < FLUSH_DATA_INVALID)
- queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
-}
-
-static void msm_hs_tty_flip_buffer_work(struct work_struct *work)
-{
- struct msm_hs_port *msm_uport =
- container_of(work, struct msm_hs_port, rx.tty_work);
-
- tty_flip_buffer_push(&msm_uport->uport.state->port);
-}
-
-/*
- * Standard API, Current states of modem control inputs
- *
- * Since CTS can be handled entirely by HARDWARE we always
- * indicate clear to send and count on the TX FIFO to block when
- * it fills up.
- *
- * - TIOCM_DCD
- * - TIOCM_CTS
- * - TIOCM_DSR
- * - TIOCM_RI
- * (Unsupported) DCD and DSR will return them high. RI will return low.
- */
-static unsigned int msm_hs_get_mctrl_locked(struct uart_port *uport)
-{
- return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS;
-}
-
-/*
- * True enables UART auto RFR, which indicates we are ready for data if the RX
- * buffer is not full. False disables auto RFR, and deasserts RFR to indicate
- * we are not ready for data. Must be called with UART clock on.
- */
-static void set_rfr_locked(struct uart_port *uport, int auto_rfr)
-{
- unsigned int data;
-
- data = msm_hs_read(uport, UARTDM_MR1_ADDR);
-
- if (auto_rfr) {
- /* enable auto ready-for-receiving */
- data |= UARTDM_MR1_RX_RDY_CTL_BMSK;
- msm_hs_write(uport, UARTDM_MR1_ADDR, data);
- } else {
- /* disable auto ready-for-receiving */
- data &= ~UARTDM_MR1_RX_RDY_CTL_BMSK;
- msm_hs_write(uport, UARTDM_MR1_ADDR, data);
- /* RFR is active low, set high */
- msm_hs_write(uport, UARTDM_CR_ADDR, RFR_HIGH);
- }
-}
-
-/*
- * Standard API, used to set or clear RFR
- */
-static void msm_hs_set_mctrl_locked(struct uart_port *uport,
- unsigned int mctrl)
-{
- unsigned int auto_rfr;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- clk_enable(msm_uport->clk);
-
- auto_rfr = TIOCM_RTS & mctrl ? 1 : 0;
- set_rfr_locked(uport, auto_rfr);
-
- clk_disable(msm_uport->clk);
-}
-
-/* Standard API, Enable modem status (CTS) interrupt */
-static void msm_hs_enable_ms_locked(struct uart_port *uport)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- clk_enable(msm_uport->clk);
-
- /* Enable DELTA_CTS Interrupt */
- msm_uport->imr_reg |= UARTDM_ISR_DELTA_CTS_BMSK;
- msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
-
- clk_disable(msm_uport->clk);
-
-}
-
-/*
- * Standard API, Break Signal
- *
- * Control the transmission of a break signal. ctl eq 0 => break
- * signal terminate ctl ne 0 => start break signal
- */
-static void msm_hs_break_ctl(struct uart_port *uport, int ctl)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- clk_enable(msm_uport->clk);
- msm_hs_write(uport, UARTDM_CR_ADDR, ctl ? START_BREAK : STOP_BREAK);
- clk_disable(msm_uport->clk);
-}
-
-static void msm_hs_config_port(struct uart_port *uport, int cfg_flags)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&uport->lock, flags);
- if (cfg_flags & UART_CONFIG_TYPE) {
- uport->type = PORT_MSM;
- msm_hs_request_port(uport);
- }
- spin_unlock_irqrestore(&uport->lock, flags);
-}
-
-/* Handle CTS changes (Called from interrupt handler) */
-static void msm_hs_handle_delta_cts_locked(struct uart_port *uport)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- clk_enable(msm_uport->clk);
-
- /* clear interrupt */
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
- uport->icount.cts++;
-
- clk_disable(msm_uport->clk);
-
- /* clear the IOCTL TIOCMIWAIT if called */
- wake_up_interruptible(&uport->state->port.delta_msr_wait);
-}
-
-/* check if the TX path is flushed, and if so clock off
- * returns 0 did not clock off, need to retry (still sending final byte)
- * -1 did not clock off, do not retry
- * 1 if we clocked off
- */
-static int msm_hs_check_clock_off_locked(struct uart_port *uport)
-{
- unsigned long sr_status;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
- struct circ_buf *tx_buf = &uport->state->xmit;
-
- /* Cancel if tx tty buffer is not empty, dma is in flight,
- * or tx fifo is not empty, or rx fifo is not empty */
- if (msm_uport->clk_state != MSM_HS_CLK_REQUEST_OFF ||
- !uart_circ_empty(tx_buf) || msm_uport->tx.dma_in_flight ||
- (msm_uport->imr_reg & UARTDM_ISR_TXLEV_BMSK) ||
- !(msm_uport->imr_reg & UARTDM_ISR_RXLEV_BMSK)) {
- return -1;
- }
-
- /* Make sure the uart is finished with the last byte */
- sr_status = msm_hs_read(uport, UARTDM_SR_ADDR);
- if (!(sr_status & UARTDM_SR_TXEMT_BMSK))
- return 0; /* retry */
-
- /* Make sure forced RXSTALE flush complete */
- switch (msm_uport->clk_req_off_state) {
- case CLK_REQ_OFF_START:
- msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_ISSUED;
- msm_hs_write(uport, UARTDM_CR_ADDR, FORCE_STALE_EVENT);
- return 0; /* RXSTALE flush not complete - retry */
- case CLK_REQ_OFF_RXSTALE_ISSUED:
- case CLK_REQ_OFF_FLUSH_ISSUED:
- return 0; /* RXSTALE flush not complete - retry */
- case CLK_REQ_OFF_RXSTALE_FLUSHED:
- break; /* continue */
- }
-
- if (msm_uport->rx.flush != FLUSH_SHUTDOWN) {
- if (msm_uport->rx.flush == FLUSH_NONE)
- msm_hs_stop_rx_locked(uport);
- return 0; /* come back later to really clock off */
- }
-
- /* we really want to clock off */
- clk_disable(msm_uport->clk);
- msm_uport->clk_state = MSM_HS_CLK_OFF;
-
- if (use_low_power_rx_wakeup(msm_uport)) {
- msm_uport->rx_wakeup.ignore = 1;
- enable_irq(msm_uport->rx_wakeup.irq);
- }
- return 1;
-}
-
-static enum hrtimer_restart msm_hs_clk_off_retry(struct hrtimer *timer)
-{
- unsigned long flags;
- int ret = HRTIMER_NORESTART;
- struct msm_hs_port *msm_uport = container_of(timer, struct msm_hs_port,
- clk_off_timer);
- struct uart_port *uport = &msm_uport->uport;
-
- spin_lock_irqsave(&uport->lock, flags);
-
- if (!msm_hs_check_clock_off_locked(uport)) {
- hrtimer_forward_now(timer, msm_uport->clk_off_delay);
- ret = HRTIMER_RESTART;
- }
-
- spin_unlock_irqrestore(&uport->lock, flags);
-
- return ret;
-}
-
-static irqreturn_t msm_hs_isr(int irq, void *dev)
-{
- unsigned long flags;
- unsigned long isr_status;
- struct msm_hs_port *msm_uport = dev;
- struct uart_port *uport = &msm_uport->uport;
- struct circ_buf *tx_buf = &uport->state->xmit;
- struct msm_hs_tx *tx = &msm_uport->tx;
- struct msm_hs_rx *rx = &msm_uport->rx;
-
- spin_lock_irqsave(&uport->lock, flags);
-
- isr_status = msm_hs_read(uport, UARTDM_MISR_ADDR);
-
- /* Uart RX starting */
- if (isr_status & UARTDM_ISR_RXLEV_BMSK) {
- msm_uport->imr_reg &= ~UARTDM_ISR_RXLEV_BMSK;
- msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
- }
- /* Stale rx interrupt */
- if (isr_status & UARTDM_ISR_RXSTALE_BMSK) {
- msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE);
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
-
- if (msm_uport->clk_req_off_state == CLK_REQ_OFF_RXSTALE_ISSUED)
- msm_uport->clk_req_off_state =
- CLK_REQ_OFF_FLUSH_ISSUED;
- if (rx->flush == FLUSH_NONE) {
- rx->flush = FLUSH_DATA_READY;
- msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1);
- }
- }
- /* tx ready interrupt */
- if (isr_status & UARTDM_ISR_TX_READY_BMSK) {
- /* Clear TX Ready */
- msm_hs_write(uport, UARTDM_CR_ADDR, CLEAR_TX_READY);
-
- if (msm_uport->clk_state == MSM_HS_CLK_REQUEST_OFF) {
- msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
- msm_hs_write(uport, UARTDM_IMR_ADDR,
- msm_uport->imr_reg);
- }
-
- /* Complete DMA TX transactions and submit new transactions */
- tx_buf->tail = (tx_buf->tail + tx->tx_count) & ~UART_XMIT_SIZE;
-
- tx->dma_in_flight = 0;
-
- uport->icount.tx += tx->tx_count;
- if (tx->tx_ready_int_en)
- msm_hs_submit_tx_locked(uport);
-
- if (uart_circ_chars_pending(tx_buf) < WAKEUP_CHARS)
- uart_write_wakeup(uport);
- }
- if (isr_status & UARTDM_ISR_TXLEV_BMSK) {
- /* TX FIFO is empty */
- msm_uport->imr_reg &= ~UARTDM_ISR_TXLEV_BMSK;
- msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
- if (!msm_hs_check_clock_off_locked(uport))
- hrtimer_start(&msm_uport->clk_off_timer,
- msm_uport->clk_off_delay,
- HRTIMER_MODE_REL);
- }
-
- /* Change in CTS interrupt */
- if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK)
- msm_hs_handle_delta_cts_locked(uport);
-
- spin_unlock_irqrestore(&uport->lock, flags);
-
- return IRQ_HANDLED;
-}
-
-void msm_hs_request_clock_off_locked(struct uart_port *uport)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- if (msm_uport->clk_state == MSM_HS_CLK_ON) {
- msm_uport->clk_state = MSM_HS_CLK_REQUEST_OFF;
- msm_uport->clk_req_off_state = CLK_REQ_OFF_START;
- if (!use_low_power_rx_wakeup(msm_uport))
- set_rfr_locked(uport, 0);
- msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK;
- msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
- }
-}
-
-/**
- * msm_hs_request_clock_off - request to (i.e. asynchronously) turn off uart
- * clock once pending TX is flushed and Rx DMA command is terminated.
- * @uport: uart_port structure for the device instance.
- *
- * This functions puts the device into a partially active low power mode. It
- * waits to complete all pending tx transactions, flushes ongoing Rx DMA
- * command and terminates UART side Rx transaction, puts UART HW in non DMA
- * mode and then clocks off the device. A client calls this when no UART
- * data is expected. msm_request_clock_on() must be called before any further
- * UART can be sent or received.
- */
-void msm_hs_request_clock_off(struct uart_port *uport)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&uport->lock, flags);
- msm_hs_request_clock_off_locked(uport);
- spin_unlock_irqrestore(&uport->lock, flags);
-}
-
-void msm_hs_request_clock_on_locked(struct uart_port *uport)
-{
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
- unsigned int data;
-
- switch (msm_uport->clk_state) {
- case MSM_HS_CLK_OFF:
- clk_enable(msm_uport->clk);
- disable_irq_nosync(msm_uport->rx_wakeup.irq);
- /* fall-through */
- case MSM_HS_CLK_REQUEST_OFF:
- if (msm_uport->rx.flush == FLUSH_STOP ||
- msm_uport->rx.flush == FLUSH_SHUTDOWN) {
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
- data = msm_hs_read(uport, UARTDM_DMEN_ADDR);
- data |= UARTDM_RX_DM_EN_BMSK;
- msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
- }
- hrtimer_try_to_cancel(&msm_uport->clk_off_timer);
- if (msm_uport->rx.flush == FLUSH_SHUTDOWN)
- msm_hs_start_rx_locked(uport);
- if (!use_low_power_rx_wakeup(msm_uport))
- set_rfr_locked(uport, 1);
- if (msm_uport->rx.flush == FLUSH_STOP)
- msm_uport->rx.flush = FLUSH_IGNORE;
- msm_uport->clk_state = MSM_HS_CLK_ON;
- break;
- case MSM_HS_CLK_ON:
- break;
- case MSM_HS_CLK_PORT_OFF:
- break;
- }
-}
-
-/**
- * msm_hs_request_clock_on - Switch the device from partially active low
- * power mode to fully active (i.e. clock on) mode.
- * @uport: uart_port structure for the device.
- *
- * This function switches on the input clock, puts UART HW into DMA mode
- * and enqueues an Rx DMA command if the device was in partially active
- * mode. It has no effect if called with the device in inactive state.
- */
-void msm_hs_request_clock_on(struct uart_port *uport)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&uport->lock, flags);
- msm_hs_request_clock_on_locked(uport);
- spin_unlock_irqrestore(&uport->lock, flags);
-}
-
-static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev)
-{
- unsigned int wakeup = 0;
- unsigned long flags;
- struct msm_hs_port *msm_uport = dev;
- struct uart_port *uport = &msm_uport->uport;
-
- spin_lock_irqsave(&uport->lock, flags);
- if (msm_uport->clk_state == MSM_HS_CLK_OFF) {
- /* ignore the first irq - it is a pending irq that occurred
- * before enable_irq() */
- if (msm_uport->rx_wakeup.ignore)
- msm_uport->rx_wakeup.ignore = 0;
- else
- wakeup = 1;
- }
-
- if (wakeup) {
- /* the uart was clocked off during an rx, wake up and
- * optionally inject char into tty rx */
- msm_hs_request_clock_on_locked(uport);
- if (msm_uport->rx_wakeup.inject_rx) {
- tty_insert_flip_char(&uport->state->port,
- msm_uport->rx_wakeup.rx_to_inject,
- TTY_NORMAL);
- queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work);
- }
- }
-
- spin_unlock_irqrestore(&uport->lock, flags);
-
- return IRQ_HANDLED;
-}
-
-static const char *msm_hs_type(struct uart_port *port)
-{
- return (port->type == PORT_MSM) ? "MSM_HS_UART" : NULL;
-}
-
-/* Called when port is opened */
-static int msm_hs_startup(struct uart_port *uport)
-{
- int ret;
- int rfr_level;
- unsigned long flags;
- unsigned int data;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
- struct circ_buf *tx_buf = &uport->state->xmit;
- struct msm_hs_tx *tx = &msm_uport->tx;
- struct msm_hs_rx *rx = &msm_uport->rx;
-
- rfr_level = uport->fifosize;
- if (rfr_level > 16)
- rfr_level -= 16;
-
- tx->dma_base = dma_map_single(uport->dev, tx_buf->buf, UART_XMIT_SIZE,
- DMA_TO_DEVICE);
-
- /* do not let tty layer execute RX in global workqueue, use a
- * dedicated workqueue managed by this driver */
- uport->state->port.low_latency = 1;
-
- /* turn on uart clk */
- ret = msm_hs_init_clk_locked(uport);
- if (unlikely(ret)) {
- printk(KERN_ERR "Turning uartclk failed!\n");
- goto err_msm_hs_init_clk;
- }
-
- /* Set auto RFR Level */
- data = msm_hs_read(uport, UARTDM_MR1_ADDR);
- data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK;
- data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK;
- data |= (UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2));
- data |= (UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level);
- msm_hs_write(uport, UARTDM_MR1_ADDR, data);
-
- /* Make sure RXSTALE count is non-zero */
- data = msm_hs_read(uport, UARTDM_IPR_ADDR);
- if (!data) {
- data |= 0x1f & UARTDM_IPR_STALE_LSB_BMSK;
- msm_hs_write(uport, UARTDM_IPR_ADDR, data);
- }
-
- /* Enable Data Mover Mode */
- data = UARTDM_TX_DM_EN_BMSK | UARTDM_RX_DM_EN_BMSK;
- msm_hs_write(uport, UARTDM_DMEN_ADDR, data);
-
- /* Reset TX */
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX);
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX);
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS);
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_BREAK_INT);
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT);
- msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS);
- msm_hs_write(uport, UARTDM_CR_ADDR, RFR_LOW);
- /* Turn on Uart Receiver */
- msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_EN_BMSK);
-
- /* Turn on Uart Transmitter */
- msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_EN_BMSK);
-
- /* Initialize the tx */
- tx->tx_ready_int_en = 0;
- tx->dma_in_flight = 0;
-
- tx->xfer.complete_func = msm_hs_dmov_tx_callback;
- tx->xfer.execute_func = NULL;
-
- tx->command_ptr->cmd = CMD_LC |
- CMD_DST_CRCI(msm_uport->dma_tx_crci) | CMD_MODE_BOX;
-
- tx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
- | (MSM_UARTDM_BURST_SIZE);
-
- tx->command_ptr->row_offset = (MSM_UARTDM_BURST_SIZE << 16);
-
- tx->command_ptr->dst_row_addr =
- msm_uport->uport.mapbase + UARTDM_TF_ADDR;
-
-
- /* Turn on Uart Receive */
- rx->xfer.complete_func = msm_hs_dmov_rx_callback;
- rx->xfer.execute_func = NULL;
-
- rx->command_ptr->cmd = CMD_LC |
- CMD_SRC_CRCI(msm_uport->dma_rx_crci) | CMD_MODE_BOX;
-
- rx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16)
- | (MSM_UARTDM_BURST_SIZE);
- rx->command_ptr->row_offset = MSM_UARTDM_BURST_SIZE;
- rx->command_ptr->src_row_addr = uport->mapbase + UARTDM_RF_ADDR;
-
-
- msm_uport->imr_reg |= UARTDM_ISR_RXSTALE_BMSK;
- /* Enable reading the current CTS, no harm even if CTS is ignored */
- msm_uport->imr_reg |= UARTDM_ISR_CURRENT_CTS_BMSK;
-
- msm_hs_write(uport, UARTDM_TFWR_ADDR, 0); /* TXLEV on empty TX fifo */
-
-
- ret = request_irq(uport->irq, msm_hs_isr, IRQF_TRIGGER_HIGH,
- "msm_hs_uart", msm_uport);
- if (unlikely(ret)) {
- printk(KERN_ERR "Request msm_hs_uart IRQ failed!\n");
- goto err_request_irq;
- }
- if (use_low_power_rx_wakeup(msm_uport)) {
- ret = request_irq(msm_uport->rx_wakeup.irq,
- msm_hs_rx_wakeup_isr,
- IRQF_TRIGGER_FALLING,
- "msm_hs_rx_wakeup", msm_uport);
- if (unlikely(ret)) {
- printk(KERN_ERR "Request msm_hs_rx_wakeup IRQ failed!\n");
- free_irq(uport->irq, msm_uport);
- goto err_request_irq;
- }
- disable_irq(msm_uport->rx_wakeup.irq);
- }
-
- spin_lock_irqsave(&uport->lock, flags);
-
- msm_hs_write(uport, UARTDM_RFWR_ADDR, 0);
- msm_hs_start_rx_locked(uport);
-
- spin_unlock_irqrestore(&uport->lock, flags);
- ret = pm_runtime_set_active(uport->dev);
- if (ret)
- dev_err(uport->dev, "set active error:%d\n", ret);
- pm_runtime_enable(uport->dev);
-
- return 0;
-
-err_request_irq:
-err_msm_hs_init_clk:
- dma_unmap_single(uport->dev, tx->dma_base,
- UART_XMIT_SIZE, DMA_TO_DEVICE);
- return ret;
-}
-
-/* Initialize tx and rx data structures */
-static int uartdm_init_port(struct uart_port *uport)
-{
- int ret = 0;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
- struct msm_hs_tx *tx = &msm_uport->tx;
- struct msm_hs_rx *rx = &msm_uport->rx;
-
- /* Allocate the command pointer. Needs to be 64 bit aligned */
- tx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
- if (!tx->command_ptr)
- return -ENOMEM;
-
- tx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA);
- if (!tx->command_ptr_ptr) {
- ret = -ENOMEM;
- goto err_tx_command_ptr_ptr;
- }
-
- tx->mapped_cmd_ptr = dma_map_single(uport->dev, tx->command_ptr,
- sizeof(dmov_box), DMA_TO_DEVICE);
- tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev,
- tx->command_ptr_ptr,
- sizeof(u32), DMA_TO_DEVICE);
- tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr);
-
- init_waitqueue_head(&rx->wait);
-
- rx->pool = dma_pool_create("rx_buffer_pool", uport->dev,
- UARTDM_RX_BUF_SIZE, 16, 0);
- if (!rx->pool) {
- pr_err("%s(): cannot allocate rx_buffer_pool", __func__);
- ret = -ENOMEM;
- goto err_dma_pool_create;
- }
-
- rx->buffer = dma_pool_alloc(rx->pool, GFP_KERNEL, &rx->rbuffer);
- if (!rx->buffer) {
- pr_err("%s(): cannot allocate rx->buffer", __func__);
- ret = -ENOMEM;
- goto err_dma_pool_alloc;
- }
-
- /* Allocate the command pointer. Needs to be 64 bit aligned */
- rx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA);
- if (!rx->command_ptr) {
- pr_err("%s(): cannot allocate rx->command_ptr", __func__);
- ret = -ENOMEM;
- goto err_rx_command_ptr;
- }
-
- rx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA);
- if (!rx->command_ptr_ptr) {
- pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__);
- ret = -ENOMEM;
- goto err_rx_command_ptr_ptr;
- }
-
- rx->command_ptr->num_rows = ((UARTDM_RX_BUF_SIZE >> 4) << 16) |
- (UARTDM_RX_BUF_SIZE >> 4);
-
- rx->command_ptr->dst_row_addr = rx->rbuffer;
-
- rx->mapped_cmd_ptr = dma_map_single(uport->dev, rx->command_ptr,
- sizeof(dmov_box), DMA_TO_DEVICE);
-
- *rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr);
-
- rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr,
- sizeof(u32), DMA_TO_DEVICE);
- rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr);
-
- INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work);
-
- return ret;
-
-err_rx_command_ptr_ptr:
- kfree(rx->command_ptr);
-err_rx_command_ptr:
- dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer,
- msm_uport->rx.rbuffer);
-err_dma_pool_alloc:
- dma_pool_destroy(msm_uport->rx.pool);
-err_dma_pool_create:
- dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr,
- sizeof(u32), DMA_TO_DEVICE);
- dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr,
- sizeof(dmov_box), DMA_TO_DEVICE);
- kfree(msm_uport->tx.command_ptr_ptr);
-err_tx_command_ptr_ptr:
- kfree(msm_uport->tx.command_ptr);
- return ret;
-}
-
-static int msm_hs_probe(struct platform_device *pdev)
-{
- int ret;
- struct uart_port *uport;
- struct msm_hs_port *msm_uport;
- struct resource *resource;
- const struct msm_serial_hs_platform_data *pdata =
- dev_get_platdata(&pdev->dev);
-
- if (pdev->id < 0 || pdev->id >= UARTDM_NR) {
- printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id);
- return -EINVAL;
- }
-
- msm_uport = &q_uart_port[pdev->id];
- uport = &msm_uport->uport;
-
- uport->dev = &pdev->dev;
-
- resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(!resource))
- return -ENXIO;
-
- uport->mapbase = resource->start;
- uport->irq = platform_get_irq(pdev, 0);
- if (unlikely(uport->irq < 0))
- return -ENXIO;
-
- if (unlikely(irq_set_irq_wake(uport->irq, 1)))
- return -ENXIO;
-
- if (pdata == NULL || pdata->rx_wakeup_irq < 0)
- msm_uport->rx_wakeup.irq = -1;
- else {
- msm_uport->rx_wakeup.irq = pdata->rx_wakeup_irq;
- msm_uport->rx_wakeup.ignore = 1;
- msm_uport->rx_wakeup.inject_rx = pdata->inject_rx_on_wakeup;
- msm_uport->rx_wakeup.rx_to_inject = pdata->rx_to_inject;
-
- if (unlikely(msm_uport->rx_wakeup.irq < 0))
- return -ENXIO;
-
- if (unlikely(irq_set_irq_wake(msm_uport->rx_wakeup.irq, 1)))
- return -ENXIO;
- }
-
- if (pdata == NULL)
- msm_uport->exit_lpm_cb = NULL;
- else
- msm_uport->exit_lpm_cb = pdata->exit_lpm_cb;
-
- resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- "uartdm_channels");
- if (unlikely(!resource))
- return -ENXIO;
-
- msm_uport->dma_tx_channel = resource->start;
- msm_uport->dma_rx_channel = resource->end;
-
- resource = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- "uartdm_crci");
- if (unlikely(!resource))
- return -ENXIO;
-
- msm_uport->dma_tx_crci = resource->start;
- msm_uport->dma_rx_crci = resource->end;
-
- uport->iotype = UPIO_MEM;
- uport->fifosize = UART_FIFOSIZE;
- uport->ops = &msm_hs_ops;
- uport->flags = UPF_BOOT_AUTOCONF;
- uport->uartclk = UARTCLK;
- msm_uport->imr_reg = 0x0;
- msm_uport->clk = clk_get(&pdev->dev, "uartdm_clk");
- if (IS_ERR(msm_uport->clk))
- return PTR_ERR(msm_uport->clk);
-
- ret = uartdm_init_port(uport);
- if (unlikely(ret))
- return ret;
-
- msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
- hrtimer_init(&msm_uport->clk_off_timer, CLOCK_MONOTONIC,
- HRTIMER_MODE_REL);
- msm_uport->clk_off_timer.function = msm_hs_clk_off_retry;
- msm_uport->clk_off_delay = ktime_set(0, 1000000); /* 1ms */
-
- uport->line = pdev->id;
- return uart_add_one_port(&msm_hs_driver, uport);
-}
-
-static int __init msm_serial_hs_init(void)
-{
- int ret, i;
-
- /* Init all UARTS as non-configured */
- for (i = 0; i < UARTDM_NR; i++)
- q_uart_port[i].uport.type = PORT_UNKNOWN;
-
- msm_hs_workqueue = create_singlethread_workqueue("msm_serial_hs");
- if (unlikely(!msm_hs_workqueue))
- return -ENOMEM;
-
- ret = uart_register_driver(&msm_hs_driver);
- if (unlikely(ret)) {
- printk(KERN_ERR "%s failed to load\n", __func__);
- goto err_uart_register_driver;
- }
-
- ret = platform_driver_register(&msm_serial_hs_platform_driver);
- if (ret) {
- printk(KERN_ERR "%s failed to load\n", __func__);
- goto err_platform_driver_register;
- }
-
- return ret;
-
-err_platform_driver_register:
- uart_unregister_driver(&msm_hs_driver);
-err_uart_register_driver:
- destroy_workqueue(msm_hs_workqueue);
- return ret;
-}
-module_init(msm_serial_hs_init);
-
-/*
- * Called by the upper layer when port is closed.
- * - Disables the port
- * - Unhook the ISR
- */
-static void msm_hs_shutdown(struct uart_port *uport)
-{
- unsigned long flags;
- struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
-
- BUG_ON(msm_uport->rx.flush < FLUSH_STOP);
-
- spin_lock_irqsave(&uport->lock, flags);
- clk_enable(msm_uport->clk);
-
- /* Disable the transmitter */
- msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_DISABLE_BMSK);
- /* Disable the receiver */
- msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_DISABLE_BMSK);
-
- pm_runtime_disable(uport->dev);
- pm_runtime_set_suspended(uport->dev);
-
- /* Free the interrupt */
- free_irq(uport->irq, msm_uport);
- if (use_low_power_rx_wakeup(msm_uport))
- free_irq(msm_uport->rx_wakeup.irq, msm_uport);
-
- msm_uport->imr_reg = 0;
- msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg);
-
- wait_event(msm_uport->rx.wait, msm_uport->rx.flush == FLUSH_SHUTDOWN);
-
- clk_disable(msm_uport->clk); /* to balance local clk_enable() */
- if (msm_uport->clk_state != MSM_HS_CLK_OFF)
- clk_disable(msm_uport->clk); /* to balance clk_state */
- msm_uport->clk_state = MSM_HS_CLK_PORT_OFF;
-
- dma_unmap_single(uport->dev, msm_uport->tx.dma_base,
- UART_XMIT_SIZE, DMA_TO_DEVICE);
-
- spin_unlock_irqrestore(&uport->lock, flags);
-
- if (cancel_work_sync(&msm_uport->rx.tty_work))
- msm_hs_tty_flip_buffer_work(&msm_uport->rx.tty_work);
-}
-
-static void __exit msm_serial_hs_exit(void)
-{
- flush_workqueue(msm_hs_workqueue);
- destroy_workqueue(msm_hs_workqueue);
- platform_driver_unregister(&msm_serial_hs_platform_driver);
- uart_unregister_driver(&msm_hs_driver);
-}
-module_exit(msm_serial_hs_exit);
-
-#ifdef CONFIG_PM
-static int msm_hs_runtime_idle(struct device *dev)
-{
- /*
- * returning success from idle results in runtime suspend to be
- * called
- */
- return 0;
-}
-
-static int msm_hs_runtime_resume(struct device *dev)
-{
- struct platform_device *pdev = container_of(dev, struct
- platform_device, dev);
- struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
-
- msm_hs_request_clock_on(&msm_uport->uport);
- return 0;
-}
-
-static int msm_hs_runtime_suspend(struct device *dev)
-{
- struct platform_device *pdev = container_of(dev, struct
- platform_device, dev);
- struct msm_hs_port *msm_uport = &q_uart_port[pdev->id];
-
- msm_hs_request_clock_off(&msm_uport->uport);
- return 0;
-}
-#else
-#define msm_hs_runtime_idle NULL
-#define msm_hs_runtime_resume NULL
-#define msm_hs_runtime_suspend NULL
-#endif
-
-static const struct dev_pm_ops msm_hs_dev_pm_ops = {
- .runtime_suspend = msm_hs_runtime_suspend,
- .runtime_resume = msm_hs_runtime_resume,
- .runtime_idle = msm_hs_runtime_idle,
-};
-
-static struct platform_driver msm_serial_hs_platform_driver = {
- .probe = msm_hs_probe,
- .remove = msm_hs_remove,
- .driver = {
- .name = "msm_serial_hs",
- .pm = &msm_hs_dev_pm_ops,
- },
-};
-
-static struct uart_driver msm_hs_driver = {
- .owner = THIS_MODULE,
- .driver_name = "msm_serial_hs",
- .dev_name = "ttyHS",
- .nr = UARTDM_NR,
- .cons = 0,
-};
-
-static struct uart_ops msm_hs_ops = {
- .tx_empty = msm_hs_tx_empty,
- .set_mctrl = msm_hs_set_mctrl_locked,
- .get_mctrl = msm_hs_get_mctrl_locked,
- .stop_tx = msm_hs_stop_tx_locked,
- .start_tx = msm_hs_start_tx_locked,
- .stop_rx = msm_hs_stop_rx_locked,
- .enable_ms = msm_hs_enable_ms_locked,
- .break_ctl = msm_hs_break_ctl,
- .startup = msm_hs_startup,
- .shutdown = msm_hs_shutdown,
- .set_termios = msm_hs_set_termios,
- .pm = msm_hs_pm,
- .type = msm_hs_type,
- .config_port = msm_hs_config_port,
- .release_port = msm_hs_release_port,
- .request_port = msm_hs_request_port,
-};
-
-MODULE_DESCRIPTION("High Speed UART Driver for the MSM chipset");
-MODULE_VERSION("1.2");
-MODULE_LICENSE("GPL v2");