Merge tag 'asoc-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.5

A fairly quiet release from a core and framework point of view, but a
very big one from the point of view of new drivers:

 - More refectoring from Morimoto-san, this time mainly around DAI
   links and how we control the ordering of trigger() callbacks.
 - Convert a lot of drivers to use maple tree based caches.
 - Lots of work on the x86 driver stack.
 - Compressed audio support for Qualcomm.
 - Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon,
   Ingenic X1000, Intel systems with various CODECs, Longsoon platforms,
   Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with
   NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781.

1 files changed, 45 insertions, 34 deletions

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c0ca4d12f95d..d831f5acf7b5 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2440,6 +2440,7 @@ static int dwc3_gadget_func_wakeup(struct usb_gadget *g, int intf_id)
 			return -EINVAL;
 		}
 		dwc3_resume_gadget(dwc);
+		dwc->suspended = false;
 		dwc->link_state = DWC3_LINK_STATE_U0;
 	}
 
@@ -2699,6 +2700,21 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc)
 	return ret;
 }
 
+static int dwc3_gadget_soft_connect(struct dwc3 *dwc)
+{
+	/*
+	 * In the Synopsys DWC_usb31 1.90a programming guide section
+	 * 4.1.9, it specifies that for a reconnect after a
+	 * device-initiated disconnect requires a core soft reset
+	 * (DCTL.CSftRst) before enabling the run/stop bit.
+	 */
+	dwc3_core_soft_reset(dwc);
+
+	dwc3_event_buffers_setup(dwc);
+	__dwc3_gadget_start(dwc);
+	return dwc3_gadget_run_stop(dwc, true);
+}
+
 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
@@ -2737,21 +2753,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 
 	synchronize_irq(dwc->irq_gadget);
 
-	if (!is_on) {
+	if (!is_on)
 		ret = dwc3_gadget_soft_disconnect(dwc);
-	} else {
-		/*
-		 * In the Synopsys DWC_usb31 1.90a programming guide section
-		 * 4.1.9, it specifies that for a reconnect after a
-		 * device-initiated disconnect requires a core soft reset
-		 * (DCTL.CSftRst) before enabling the run/stop bit.
-		 */
-		dwc3_core_soft_reset(dwc);
-
-		dwc3_event_buffers_setup(dwc);
-		__dwc3_gadget_start(dwc);
-		ret = dwc3_gadget_run_stop(dwc, true);
-	}
+	else
+		ret = dwc3_gadget_soft_connect(dwc);
 
 	pm_runtime_put(dwc->dev);
 
@@ -3938,6 +3943,8 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 {
 	int			reg;
 
+	dwc->suspended = false;
+
 	dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RX_DET);
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -3962,6 +3969,8 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 {
 	u32			reg;
 
+	dwc->suspended = false;
+
 	/*
 	 * Ideally, dwc3_reset_gadget() would trigger the function
 	 * drivers to stop any active transfers through ep disable.
@@ -4180,6 +4189,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 
 static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc, unsigned int evtinfo)
 {
+	dwc->suspended = false;
+
 	/*
 	 * TODO take core out of low power mode when that's
 	 * implemented.
@@ -4277,6 +4288,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 		if (dwc->gadget->wakeup_armed) {
 			dwc3_gadget_enable_linksts_evts(dwc, false);
 			dwc3_resume_gadget(dwc);
+			dwc->suspended = false;
 		}
 		break;
 	case DWC3_LINK_STATE_U1:
@@ -4303,8 +4315,10 @@ static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
 {
 	enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
 
-	if (dwc->link_state != next && next == DWC3_LINK_STATE_U3)
+	if (!dwc->suspended && next == DWC3_LINK_STATE_U3) {
+		dwc->suspended = true;
 		dwc3_suspend_gadget(dwc);
+	}
 
 	dwc->link_state = next;
 }
@@ -4655,42 +4669,39 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
 	unsigned long flags;
+	int ret;
 
 	if (!dwc->gadget_driver)
 		return 0;
 
-	dwc3_gadget_run_stop(dwc, false);
+	ret = dwc3_gadget_soft_disconnect(dwc);
+	if (ret)
+		goto err;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	dwc3_disconnect_gadget(dwc);
-	__dwc3_gadget_stop(dwc);
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return 0;
+
+err:
+	/*
+	 * Attempt to reset the controller's state. Likely no
+	 * communication can be established until the host
+	 * performs a port reset.
+	 */
+	if (dwc->softconnect)
+		dwc3_gadget_soft_connect(dwc);
+
+	return ret;
 }
 
 int dwc3_gadget_resume(struct dwc3 *dwc)
 {
-	int			ret;
-
 	if (!dwc->gadget_driver || !dwc->softconnect)
 		return 0;
 
-	ret = __dwc3_gadget_start(dwc);
-	if (ret < 0)
-		goto err0;
-
-	ret = dwc3_gadget_run_stop(dwc, true);
-	if (ret < 0)
-		goto err1;
-
-	return 0;
-
-err1:
-	__dwc3_gadget_stop(dwc);
-
-err0:
-	return ret;
+	return dwc3_gadget_soft_connect(dwc);
 }
 
 void dwc3_gadget_process_pending_events(struct dwc3 *dwc)