Merge 4.0-rc5 into usb-next

We want the USB fixes in here as well to resolve merge conflicts.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 19 insertions, 115 deletions

diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 663f7908b15c..be0964a801e8 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -34,7 +34,6 @@ static const char hcd_name[] = "ehci-atmel";
 
 struct atmel_ehci_priv {
 	struct clk *iclk;
-	struct clk *fclk;
 	struct clk *uclk;
 	bool clocked;
 };
@@ -51,12 +50,9 @@ static void atmel_start_clock(struct atmel_ehci_priv *atmel_ehci)
 {
 	if (atmel_ehci->clocked)
 		return;
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(atmel_ehci->uclk, 48000000);
-		clk_prepare_enable(atmel_ehci->uclk);
-	}
+
+	clk_prepare_enable(atmel_ehci->uclk);
 	clk_prepare_enable(atmel_ehci->iclk);
-	clk_prepare_enable(atmel_ehci->fclk);
 	atmel_ehci->clocked = true;
 }
 
@@ -64,10 +60,9 @@ static void atmel_stop_clock(struct atmel_ehci_priv *atmel_ehci)
 {
 	if (!atmel_ehci->clocked)
 		return;
-	clk_disable_unprepare(atmel_ehci->fclk);
+
 	clk_disable_unprepare(atmel_ehci->iclk);
-	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(atmel_ehci->uclk);
+	clk_disable_unprepare(atmel_ehci->uclk);
 	atmel_ehci->clocked = false;
 }
 
@@ -146,20 +141,13 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
 		retval = -ENOENT;
 		goto fail_request_resource;
 	}
-	atmel_ehci->fclk = devm_clk_get(&pdev->dev, "uhpck");
-	if (IS_ERR(atmel_ehci->fclk)) {
-		dev_err(&pdev->dev, "Error getting function clock\n");
-		retval = -ENOENT;
+
+	atmel_ehci->uclk = devm_clk_get(&pdev->dev, "usb_clk");
+	if (IS_ERR(atmel_ehci->uclk)) {
+		dev_err(&pdev->dev, "failed to get uclk\n");
+		retval = PTR_ERR(atmel_ehci->uclk);
 		goto fail_request_resource;
 	}
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		atmel_ehci->uclk = devm_clk_get(&pdev->dev, "usb_clk");
-		if (IS_ERR(atmel_ehci->uclk)) {
-			dev_err(&pdev->dev, "failed to get uclk\n");
-			retval = PTR_ERR(atmel_ehci->uclk);
-			goto fail_request_resource;
-		}
-	}
 
 	ehci = hcd_to_ehci(hcd);
 	/* registers start at offset 0x0 */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index da2ff5097fcf..d8fb2cdaf8d8 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1729,7 +1729,7 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
 	if (!command)
 		return;
 
-	ep->ep_state |= EP_HALTED | EP_RECENTLY_HALTED;
+	ep->ep_state |= EP_HALTED;
 	ep->stopped_stream = stream_id;
 
 	xhci_queue_reset_ep(xhci, command, slot_id, ep_index);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b06d1a53652d..ec8ac1674854 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1338,12 +1338,6 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 		goto exit;
 	}
 
-	/* Reject urb if endpoint is in soft reset, queue must stay empty */
-	if (xhci->devs[slot_id]->eps[ep_index].ep_state & EP_CONFIG_PENDING) {
-		xhci_warn(xhci, "Can't enqueue URB while ep is in soft reset\n");
-		ret = -EINVAL;
-	}
-
 	if (usb_endpoint_xfer_isoc(&urb->ep->desc))
 		size = urb->number_of_packets;
 	else
@@ -2954,36 +2948,23 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 	}
 }
 
-/* Called after clearing a halted device. USB core should have sent the control
+/* Called when clearing halted device. The core should have sent the control
  * message to clear the device halt condition. The host side of the halt should
- * already be cleared with a reset endpoint command issued immediately when the
- * STALL tx event was received.
+ * already be cleared with a reset endpoint command issued when the STALL tx
+ * event was received.
+ *
+ * Context: in_interrupt
  */
 
 void xhci_endpoint_reset(struct usb_hcd *hcd,
 		struct usb_host_endpoint *ep)
 {
 	struct xhci_hcd *xhci;
-	struct usb_device *udev;
-	struct xhci_virt_device *virt_dev;
-	struct xhci_virt_ep *virt_ep;
-	struct xhci_input_control_ctx *ctrl_ctx;
-	struct xhci_command *command;
-	unsigned int ep_index, ep_state;
-	unsigned long flags;
-	u32 ep_flag;
 
 	xhci = hcd_to_xhci(hcd);
-	udev = (struct usb_device *) ep->hcpriv;
-	if (!ep->hcpriv)
-		return;
-	virt_dev = xhci->devs[udev->slot_id];
-	ep_index = xhci_get_endpoint_index(&ep->desc);
-	virt_ep = &virt_dev->eps[ep_index];
-	ep_state = virt_ep->ep_state;
 
 	/*
-	 * Implement the config ep command in xhci 4.6.8 additional note:
+	 * We might need to implement the config ep cmd in xhci 4.8.1 note:
 	 * The Reset Endpoint Command may only be issued to endpoints in the
 	 * Halted state. If software wishes reset the Data Toggle or Sequence
 	 * Number of an endpoint that isn't in the Halted state, then software
@@ -2991,72 +2972,9 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
 	 * for the target endpoint. that is in the Stopped state.
 	 */
 
-	if (ep_state & SET_DEQ_PENDING || ep_state & EP_RECENTLY_HALTED) {
-		virt_ep->ep_state &= ~EP_RECENTLY_HALTED;
-		xhci_dbg(xhci, "ep recently halted, no toggle reset needed\n");
-		return;
-	}
-
-	/* Only interrupt and bulk ep's use Data toggle, USB2 spec 5.5.4-> */
-	if (usb_endpoint_xfer_control(&ep->desc) ||
-	    usb_endpoint_xfer_isoc(&ep->desc))
-		return;
-
-	ep_flag = xhci_get_endpoint_flag(&ep->desc);
-
-	if (ep_flag == SLOT_FLAG || ep_flag == EP0_FLAG)
-		return;
-
-	command = xhci_alloc_command(xhci, true, true, GFP_NOWAIT);
-	if (!command) {
-		xhci_err(xhci, "Could not allocate xHCI command structure.\n");
-		return;
-	}
-
-	spin_lock_irqsave(&xhci->lock, flags);
-
-	/* block ringing ep doorbell */
-	virt_ep->ep_state |= EP_CONFIG_PENDING;
-
-	/*
-	 * Make sure endpoint ring is empty before resetting the toggle/seq.
-	 * Driver is required to synchronously cancel all transfer request.
-	 *
-	 * xhci 4.6.6 says we can issue a configure endpoint command on a
-	 * running endpoint ring as long as it's idle (queue empty)
-	 */
-
-	if (!list_empty(&virt_ep->ring->td_list)) {
-		dev_err(&udev->dev, "EP not empty, refuse reset\n");
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		goto cleanup;
-	}
-
-	xhci_dbg(xhci, "Reset toggle/seq for slot %d, ep_index: %d\n",
-		 udev->slot_id, ep_index);
-
-	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
-	if (!ctrl_ctx) {
-		xhci_err(xhci, "Could not get input context, bad type. virt_dev: %p, in_ctx %p\n",
-			 virt_dev, virt_dev->in_ctx);
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		goto cleanup;
-	}
-	xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
-					   virt_dev->out_ctx, ctrl_ctx,
-					   ep_flag, ep_flag);
-	xhci_endpoint_copy(xhci, command->in_ctx, virt_dev->out_ctx, ep_index);
-
-	xhci_queue_configure_endpoint(xhci, command, command->in_ctx->dma,
-				     udev->slot_id, false);
-	xhci_ring_cmd_db(xhci);
-	spin_unlock_irqrestore(&xhci->lock, flags);
-
-	wait_for_completion(command->completion);
-
-cleanup:
-	virt_ep->ep_state &= ~EP_CONFIG_PENDING;
-	xhci_free_command(xhci, command);
+	/* For now just print debug to follow the situation */
+	xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n",
+		 ep->desc.bEndpointAddress);
 }
 
 static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 265ab1771d24..8e421b89632d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -865,8 +865,6 @@ struct xhci_virt_ep {
 #define EP_HAS_STREAMS		(1 << 4)
 /* Transitioning the endpoint to not using streams, don't enqueue URBs */
 #define EP_GETTING_NO_STREAMS	(1 << 5)
-#define EP_RECENTLY_HALTED	(1 << 6)
-#define EP_CONFIG_PENDING	(1 << 7)
 	/* ----  Related to URB cancellation ---- */
 	struct list_head	cancelled_td_list;
 	struct xhci_td		*stopped_td;