Merge 4.9-rc3 into tty-next

We want the serial/tty fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

22 files changed, 295 insertions, 80 deletions

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 96ae69502c86..111b0e0b8698 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -188,6 +188,8 @@ static void host_stop(struct ci_hdrc *ci)
 
 	if (hcd) {
 		usb_remove_hcd(hcd);
+		ci->role = CI_ROLE_END;
+		synchronize_irq(ci->irq);
 		usb_put_hcd(hcd);
 		if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
 			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index fa9b26b91507..4c0fa0b17353 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -463,9 +463,18 @@ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
  */
 void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
 {
+	bool ret;
+
 	switch (hsotg->dr_mode) {
 	case USB_DR_MODE_HOST:
-		dwc2_force_mode(hsotg, true);
+		ret = dwc2_force_mode(hsotg, true);
+		/*
+		 * NOTE: This is required for some rockchip soc based
+		 * platforms on their host-only dwc2.
+		 */
+		if (!ret)
+			msleep(50);
+
 		break;
 	case USB_DR_MODE_PERIPHERAL:
 		dwc2_force_mode(hsotg, false);
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index aad4107ef927..2a21a0414b1d 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -259,6 +259,13 @@ enum dwc2_lx_state {
 	DWC2_L3,	/* Off state */
 };
 
+/*
+ * Gadget periodic tx fifo sizes as used by legacy driver
+ * EP0 is not included
+ */
+#define DWC2_G_P_LEGACY_TX_FIFO_SIZE {256, 256, 256, 256, 768, 768, 768, \
+					   768, 0, 0, 0, 0, 0, 0, 0}
+
 /* Gadget ep0 states */
 enum dwc2_ep0_state {
 	DWC2_EP0_SETUP,
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 4cd6403a7566..24fbebc9b409 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -186,10 +186,9 @@ static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg,
  */
 static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
 {
-	unsigned int fifo;
+	unsigned int ep;
 	unsigned int addr;
 	int timeout;
-	u32 dptxfsizn;
 	u32 val;
 
 	/* Reset fifo map if not correctly cleared during previous session */
@@ -217,16 +216,16 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
 	 * them to endpoints dynamically according to maxpacket size value of
 	 * given endpoint.
 	 */
-	for (fifo = 1; fifo < MAX_EPS_CHANNELS; fifo++) {
-		dptxfsizn = dwc2_readl(hsotg->regs + DPTXFSIZN(fifo));
-
-		val = (dptxfsizn & FIFOSIZE_DEPTH_MASK) | addr;
-		addr += dptxfsizn >> FIFOSIZE_DEPTH_SHIFT;
-
-		if (addr > hsotg->fifo_mem)
-			break;
+	for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
+		if (!hsotg->g_tx_fifo_sz[ep])
+			continue;
+		val = addr;
+		val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT;
+		WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem,
+			  "insufficient fifo memory");
+		addr += hsotg->g_tx_fifo_sz[ep];
 
-		dwc2_writel(val, hsotg->regs + DPTXFSIZN(fifo));
+		dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep));
 	}
 
 	/*
@@ -3807,10 +3806,36 @@ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg)
 static void dwc2_hsotg_of_probe(struct dwc2_hsotg *hsotg)
 {
 	struct device_node *np = hsotg->dev->of_node;
+	u32 len = 0;
+	u32 i = 0;
 
 	/* Enable dma if requested in device tree */
 	hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma");
 
+	/*
+	* Register TX periodic fifo size per endpoint.
+	* EP0 is excluded since it has no fifo configuration.
+	*/
+	if (!of_find_property(np, "g-tx-fifo-size", &len))
+		goto rx_fifo;
+
+	len /= sizeof(u32);
+
+	/* Read tx fifo sizes other than ep0 */
+	if (of_property_read_u32_array(np, "g-tx-fifo-size",
+						&hsotg->g_tx_fifo_sz[1], len))
+		goto rx_fifo;
+
+	/* Add ep0 */
+	len++;
+
+	/* Make remaining TX fifos unavailable */
+	if (len < MAX_EPS_CHANNELS) {
+		for (i = len; i < MAX_EPS_CHANNELS; i++)
+			hsotg->g_tx_fifo_sz[i] = 0;
+	}
+
+rx_fifo:
 	/* Register RX fifo size */
 	of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz);
 
@@ -3832,10 +3857,13 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
 	struct device *dev = hsotg->dev;
 	int epnum;
 	int ret;
+	int i;
+	u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE;
 
 	/* Initialize to legacy fifo configuration values */
 	hsotg->g_rx_fifo_sz = 2048;
 	hsotg->g_np_g_tx_fifo_sz = 1024;
+	memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo));
 	/* Device tree specific probe */
 	dwc2_hsotg_of_probe(hsotg);
 
@@ -3853,6 +3881,9 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
 	dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n",
 						hsotg->g_np_g_tx_fifo_sz);
 	dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz);
+	for (i = 0; i < MAX_EPS_CHANNELS; i++)
+		dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i,
+						hsotg->g_tx_fifo_sz[i]);
 
 	hsotg->gadget.max_speed = USB_SPEED_HIGH;
 	hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 07cc8929f271..1dfa56a5f1c5 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -783,6 +783,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 		req->trb = trb;
 		req->trb_dma = dwc3_trb_dma_offset(dep, trb);
 		req->first_trb_index = dep->trb_enqueue;
+		dep->queued_requests++;
 	}
 
 	dwc3_ep_inc_enq(dep);
@@ -833,8 +834,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
 
-	dep->queued_requests++;
-
 	trace_dwc3_prepare_trb(dep, trb);
 }
 
@@ -1074,9 +1073,17 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 
 	list_add_tail(&req->list, &dep->pending_list);
 
-	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
-			dep->flags & DWC3_EP_PENDING_REQUEST) {
-		if (list_empty(&dep->started_list)) {
+	/*
+	 * NOTICE: Isochronous endpoints should NEVER be prestarted. We must
+	 * wait for a XferNotReady event so we will know what's the current
+	 * (micro-)frame number.
+	 *
+	 * Without this trick, we are very, very likely gonna get Bus Expiry
+	 * errors which will force us issue EndTransfer command.
+	 */
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+		if ((dep->flags & DWC3_EP_PENDING_REQUEST) &&
+				list_empty(&dep->started_list)) {
 			dwc3_stop_active_transfer(dwc, dep->number, true);
 			dep->flags = DWC3_EP_ENABLED;
 		}
@@ -1861,8 +1868,11 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 	unsigned int		s_pkt = 0;
 	unsigned int		trb_status;
 
-	dep->queued_requests--;
 	dwc3_ep_inc_deq(dep);
+
+	if (req->trb == trb)
+		dep->queued_requests--;
+
 	trace_dwc3_complete_trb(dep, trb);
 
 	/*
@@ -2980,7 +2990,7 @@ err3:
 	kfree(dwc->setup_buf);
 
 err2:
-	dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
 			dwc->ep0_trb, dwc->ep0_trb_addr);
 
 err1:
@@ -3005,7 +3015,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 	kfree(dwc->setup_buf);
 	kfree(dwc->zlp_buf);
 
-	dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
 			dwc->ep0_trb, dwc->ep0_trb_addr);
 
 	dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 54ad100af35b..e40d47d47d82 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -136,8 +136,60 @@ struct ffs_epfile {
 	/*
 	 * Buffer for holding data from partial reads which may happen since
 	 * we’re rounding user read requests to a multiple of a max packet size.
+	 *
+	 * The pointer is initialised with NULL value and may be set by
+	 * __ffs_epfile_read_data function to point to a temporary buffer.
+	 *
+	 * In normal operation, calls to __ffs_epfile_read_buffered will consume
+	 * data from said buffer and eventually free it.  Importantly, while the
+	 * function is using the buffer, it sets the pointer to NULL.  This is
+	 * all right since __ffs_epfile_read_data and __ffs_epfile_read_buffered
+	 * can never run concurrently (they are synchronised by epfile->mutex)
+	 * so the latter will not assign a new value to the pointer.
+	 *
+	 * Meanwhile ffs_func_eps_disable frees the buffer (if the pointer is
+	 * valid) and sets the pointer to READ_BUFFER_DROP value.  This special
+	 * value is crux of the synchronisation between ffs_func_eps_disable and
+	 * __ffs_epfile_read_data.
+	 *
+	 * Once __ffs_epfile_read_data is about to finish it will try to set the
+	 * pointer back to its old value (as described above), but seeing as the
+	 * pointer is not-NULL (namely READ_BUFFER_DROP) it will instead free
+	 * the buffer.
+	 *
+	 * == State transitions ==
+	 *
+	 * • ptr == NULL:  (initial state)
+	 *   ◦ __ffs_epfile_read_buffer_free: go to ptr == DROP
+	 *   ◦ __ffs_epfile_read_buffered:    nop
+	 *   ◦ __ffs_epfile_read_data allocates temp buffer: go to ptr == buf
+	 *   ◦ reading finishes:              n/a, not in ‘and reading’ state
+	 * • ptr == DROP:
+	 *   ◦ __ffs_epfile_read_buffer_free: nop
+	 *   ◦ __ffs_epfile_read_buffered:    go to ptr == NULL
+	 *   ◦ __ffs_epfile_read_data allocates temp buffer: free buf, nop
+	 *   ◦ reading finishes:              n/a, not in ‘and reading’ state
+	 * • ptr == buf:
+	 *   ◦ __ffs_epfile_read_buffer_free: free buf, go to ptr == DROP
+	 *   ◦ __ffs_epfile_read_buffered:    go to ptr == NULL and reading
+	 *   ◦ __ffs_epfile_read_data:        n/a, __ffs_epfile_read_buffered
+	 *                                    is always called first
+	 *   ◦ reading finishes:              n/a, not in ‘and reading’ state
+	 * • ptr == NULL and reading:
+	 *   ◦ __ffs_epfile_read_buffer_free: go to ptr == DROP and reading
+	 *   ◦ __ffs_epfile_read_buffered:    n/a, mutex is held
+	 *   ◦ __ffs_epfile_read_data:        n/a, mutex is held
+	 *   ◦ reading finishes and …
+	 *     … all data read:               free buf, go to ptr == NULL
+	 *     … otherwise:                   go to ptr == buf and reading
+	 * • ptr == DROP and reading:
+	 *   ◦ __ffs_epfile_read_buffer_free: nop
+	 *   ◦ __ffs_epfile_read_buffered:    n/a, mutex is held
+	 *   ◦ __ffs_epfile_read_data:        n/a, mutex is held
+	 *   ◦ reading finishes:              free buf, go to ptr == DROP
 	 */
-	struct ffs_buffer		*read_buffer;	/* P: epfile->mutex */
+	struct ffs_buffer		*read_buffer;
+#define READ_BUFFER_DROP ((struct ffs_buffer *)ERR_PTR(-ESHUTDOWN))
 
 	char				name[5];
 
@@ -736,25 +788,47 @@ static void ffs_epfile_async_io_complete(struct usb_ep *_ep,
 	schedule_work(&io_data->work);
 }
 
+static void __ffs_epfile_read_buffer_free(struct ffs_epfile *epfile)
+{
+	/*
+	 * See comment in struct ffs_epfile for full read_buffer pointer
+	 * synchronisation story.
+	 */
+	struct ffs_buffer *buf = xchg(&epfile->read_buffer, READ_BUFFER_DROP);
+	if (buf && buf != READ_BUFFER_DROP)
+		kfree(buf);
+}
+
 /* Assumes epfile->mutex is held. */
 static ssize_t __ffs_epfile_read_buffered(struct ffs_epfile *epfile,
 					  struct iov_iter *iter)
 {
-	struct ffs_buffer *buf = epfile->read_buffer;
+	/*
+	 * Null out epfile->read_buffer so ffs_func_eps_disable does not free
+	 * the buffer while we are using it.  See comment in struct ffs_epfile
+	 * for full read_buffer pointer synchronisation story.
+	 */
+	struct ffs_buffer *buf = xchg(&epfile->read_buffer, NULL);
 	ssize_t ret;
-	if (!buf)
+	if (!buf || buf == READ_BUFFER_DROP)
 		return 0;
 
 	ret = copy_to_iter(buf->data, buf->length, iter);
 	if (buf->length == ret) {
 		kfree(buf);
-		epfile->read_buffer = NULL;
-	} else if (unlikely(iov_iter_count(iter))) {
+		return ret;
+	}
+
+	if (unlikely(iov_iter_count(iter))) {
 		ret = -EFAULT;
 	} else {
 		buf->length -= ret;
 		buf->data += ret;
 	}
+
+	if (cmpxchg(&epfile->read_buffer, NULL, buf))
+		kfree(buf);
+
 	return ret;
 }
 
@@ -783,7 +857,15 @@ static ssize_t __ffs_epfile_read_data(struct ffs_epfile *epfile,
 	buf->length = data_len;
 	buf->data = buf->storage;
 	memcpy(buf->storage, data + ret, data_len);
-	epfile->read_buffer = buf;
+
+	/*
+	 * At this point read_buffer is NULL or READ_BUFFER_DROP (if
+	 * ffs_func_eps_disable has been called in the meanwhile).  See comment
+	 * in struct ffs_epfile for full read_buffer pointer synchronisation
+	 * story.
+	 */
+	if (unlikely(cmpxchg(&epfile->read_buffer, NULL, buf)))
+		kfree(buf);
 
 	return ret;
 }
@@ -1097,8 +1179,7 @@ ffs_epfile_release(struct inode *inode, struct file *file)
 
 	ENTER();
 
-	kfree(epfile->read_buffer);
-	epfile->read_buffer = NULL;
+	__ffs_epfile_read_buffer_free(epfile);
 	ffs_data_closed(epfile->ffs);
 
 	return 0;
@@ -1724,24 +1805,20 @@ static void ffs_func_eps_disable(struct ffs_function *func)
 	unsigned count            = func->ffs->eps_count;
 	unsigned long flags;
 
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
 	do {
-		if (epfile)
-			mutex_lock(&epfile->mutex);
-		spin_lock_irqsave(&func->ffs->eps_lock, flags);
 		/* pending requests get nuked */
 		if (likely(ep->ep))
 			usb_ep_disable(ep->ep);
 		++ep;
-		spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
 
 		if (epfile) {
 			epfile->ep = NULL;
-			kfree(epfile->read_buffer);
-			epfile->read_buffer = NULL;
-			mutex_unlock(&epfile->mutex);
+			__ffs_epfile_read_buffer_free(epfile);
 			++epfile;
 		}
 	} while (--count);
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
 }
 
 static int ffs_func_eps_enable(struct ffs_function *func)
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 9c8c9ed1dc9e..fe1811650dbc 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -590,8 +590,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 
 	/* throttle high/super speed IRQ rate back slightly */
 	if (gadget_is_dualspeed(dev->gadget))
-		req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH ||
-				     dev->gadget->speed == USB_SPEED_SUPER)
+		req->no_interrupt = (((dev->gadget->speed == USB_SPEED_HIGH ||
+				       dev->gadget->speed == USB_SPEED_SUPER)) &&
+					!list_empty(&dev->tx_reqs))
 			? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0)
 			: 0;
 
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index bb1f6c8f0f01..45bc997d0711 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1978,7 +1978,7 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 			dev_err(&pdev->dev, "of_probe: name error(%d)\n", ret);
 			goto err;
 		}
-		ep->ep.name = name;
+		ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", ep->index);
 
 		ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
 		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 876dca4fc216..a268d9e8d6cf 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -39,7 +39,7 @@
 
 #define DRIVER_DESC "EHCI generic platform driver"
 #define EHCI_MAX_CLKS 4
-#define EHCI_MAX_RSTS 3
+#define EHCI_MAX_RSTS 4
 #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
 
 struct ehci_platform_priv {
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 5b5880c0ae19..b38a228134df 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -221,6 +221,12 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	ohci->num_ports = board->ports;
 	at91_start_hc(pdev);
 
+	/*
+	 * The RemoteWakeupConnected bit has to be set explicitly
+	 * before calling ohci_run. The reset value of this bit is 0.
+	 */
+	ohci->hc_control = OHCI_CTRL_RWC;
+
 	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval == 0) {
 		device_wakeup_enable(hcd->self.controller);
@@ -677,9 +683,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
 	 * REVISIT: some boards will be able to turn VBUS off...
 	 */
 	if (!ohci_at91->wakeup) {
-		ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
-		ohci->hc_control &= OHCI_CTRL_RWC;
-		ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
 		ohci->rh_state = OHCI_RH_HALTED;
 
 		/* flush the writes */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 1700908b84ef..86612ac3fda2 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -72,7 +72,7 @@
 static const char	hcd_name [] = "ohci_hcd";
 
 #define	STATECHANGE_DELAY	msecs_to_jiffies(300)
-#define	IO_WATCHDOG_DELAY	msecs_to_jiffies(250)
+#define	IO_WATCHDOG_DELAY	msecs_to_jiffies(275)
 
 #include "ohci.h"
 #include "pci-quirks.h"
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 730b9fd26685..0ef16900efed 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1166,7 +1166,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				xhci_set_link_state(xhci, port_array, wIndex,
 							XDEV_RESUME);
 				spin_unlock_irqrestore(&xhci->lock, flags);
-				msleep(20);
+				msleep(USB_RESUME_TIMEOUT);
 				spin_lock_irqsave(&xhci->lock, flags);
 				xhci_set_link_state(xhci, port_array, wIndex,
 							XDEV_U0);
@@ -1355,6 +1355,35 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	return 0;
 }
 
+/*
+ * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3.
+ * warm reset a USB3 device stuck in polling or compliance mode after resume.
+ * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
+ */
+static bool xhci_port_missing_cas_quirk(int port_index,
+					     __le32 __iomem **port_array)
+{
+	u32 portsc;
+
+	portsc = readl(port_array[port_index]);
+
+	/* if any of these are set we are not stuck */
+	if (portsc & (PORT_CONNECT | PORT_CAS))
+		return false;
+
+	if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) &&
+	    ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE))
+		return false;
+
+	/* clear wakeup/change bits, and do a warm port reset */
+	portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
+	portsc |= PORT_WR;
+	writel(portsc, port_array[port_index]);
+	/* flush write */
+	readl(port_array[port_index]);
+	return true;
+}
+
 int xhci_bus_resume(struct usb_hcd *hcd)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
@@ -1392,6 +1421,14 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		u32 temp;
 
 		temp = readl(port_array[port_index]);
+
+		/* warm reset CAS limited ports stuck in polling/compliance */
+		if ((xhci->quirks & XHCI_MISSING_CAS) &&
+		    (hcd->speed >= HCD_USB3) &&
+		    xhci_port_missing_cas_quirk(port_index, port_array)) {
+			xhci_dbg(xhci, "reset stuck port %d\n", port_index);
+			continue;
+		}
 		if (DEV_SUPERSPEED_ANY(temp))
 			temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
 		else
@@ -1410,7 +1447,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 
 	if (need_usb2_u3_exit) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
-		msleep(20);
+		msleep(USB_RESUME_TIMEOUT);
 		spin_lock_irqsave(&xhci->lock, flags);
 	}
 
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index d7b0f97abbad..e96ae80d107e 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -45,11 +45,13 @@
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI	0x9cb1
 #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
 #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI		0x0aa8
 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI		0x1aa8
+#define PCI_DEVICE_ID_INTEL_APL_XHCI			0x5aa8
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -153,7 +155,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-		pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
+		(pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) {
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 		xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
 	}
@@ -169,6 +172,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
 		xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
+		xhci->quirks |= XHCI_MISSING_CAS;
+
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_EJ168) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index b2c1dc5dc0f3..f945380035d0 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -314,6 +314,8 @@ struct xhci_op_regs {
 #define XDEV_U2		(0x2 << 5)
 #define XDEV_U3		(0x3 << 5)
 #define XDEV_INACTIVE	(0x6 << 5)
+#define XDEV_POLLING	(0x7 << 5)
+#define XDEV_COMP_MODE  (0xa << 5)
 #define XDEV_RESUME	(0xf << 5)
 /* true: port has power (see HCC_PPC) */
 #define PORT_POWER	(1 << 9)
@@ -1653,6 +1655,7 @@ struct xhci_hcd {
 #define XHCI_MTK_HOST		(1 << 21)
 #define XHCI_SSIC_PORT_UNUSED	(1 << 22)
 #define XHCI_NO_64BIT_SUPPORT	(1 << 23)
+#define XHCI_MISSING_CAS	(1 << 24)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index bff4869a57cd..4042ea017985 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1255,6 +1255,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 
 	map_dma_buffer(request, musb, musb_ep);
 
+	pm_runtime_get_sync(musb->controller);
 	spin_lock_irqsave(&musb->lock, lockflags);
 
 	/* don't queue if the ep is down */
@@ -1275,6 +1276,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 
 unlock:
 	spin_unlock_irqrestore(&musb->lock, lockflags);
+	pm_runtime_mark_last_busy(musb->controller);
+	pm_runtime_put_autosuspend(musb->controller);
+
 	return status;
 }
 
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 1ab6973d4f61..cc1225485509 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -287,6 +287,7 @@ static int omap2430_musb_init(struct musb *musb)
 	}
 	musb->isr = omap2430_musb_interrupt;
 	phy_init(musb->phy);
+	phy_power_on(musb->phy);
 
 	l = musb_readl(musb->mregs, OTG_INTERFSEL);
 
@@ -323,8 +324,6 @@ static void omap2430_musb_enable(struct musb *musb)
 	struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
 	struct omap_musb_board_data *data = pdata->board_data;
 
-	if (!WARN_ON(!musb->phy))
-		phy_power_on(musb->phy);
 
 	switch (glue->status) {
 
@@ -361,9 +360,6 @@ static void omap2430_musb_disable(struct musb *musb)
 	struct device *dev = musb->controller;
 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 
-	if (!WARN_ON(!musb->phy))
-		phy_power_off(musb->phy);
-
 	if (glue->status != MUSB_UNKNOWN)
 		omap_control_usb_set_mode(glue->control_otghs,
 			USB_MODE_DISCONNECT);
@@ -375,6 +371,7 @@ static int omap2430_musb_exit(struct musb *musb)
 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 
 	omap2430_low_level_exit(musb);
+	phy_power_off(musb->phy);
 	phy_exit(musb->phy);
 	musb->phy = NULL;
 	cancel_work_sync(&glue->omap_musb_mailbox_work);
diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c
index 1d70add926f0..d544b331c9f2 100644
--- a/drivers/usb/renesas_usbhs/rcar3.c
+++ b/drivers/usb/renesas_usbhs/rcar3.c
@@ -9,6 +9,7 @@
  *
  */
 
+#include <linux/delay.h>
 #include <linux/io.h>
 #include "common.h"
 #include "rcar3.h"
@@ -35,10 +36,13 @@ static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
 
 	usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG);
 
-	if (enable)
+	if (enable) {
 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
-	else
+		/* The controller on R-Car Gen3 needs to wait up to 45 usec */
+		udelay(45);
+	} else {
 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
+	}
 
 	return 0;
 }
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 54a4de0efdba..f61477bed3a8 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1077,7 +1077,9 @@ static int cp210x_tiocmget(struct tty_struct *tty)
 	u8 control;
 	int result;
 
-	cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
+	result = cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
+	if (result)
+		return result;
 
 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b2d767e743fc..0ff7f38d7800 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -986,7 +986,8 @@ static const struct usb_device_id id_table_combined[] = {
 	/* ekey Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
 	/* Infineon Devices */
-	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC1798_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC2X7_PID, 1) },
 	/* GE Healthcare devices */
 	{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
 	/* Active Research (Actisense) devices */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index f87a938cf005..21011c0a4c64 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -626,8 +626,9 @@
 /*
  * Infineon Technologies
  */
-#define INFINEON_VID		0x058b
-#define INFINEON_TRIBOARD_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+#define INFINEON_VID		        0x058b
+#define INFINEON_TRIBOARD_TC1798_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+#define INFINEON_TRIBOARD_TC2X7_PID	0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */
 
 /*
  * Acton Research Corp.
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index d213cf44a7e4..4a037b4a79cf 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1078,7 +1078,8 @@ static int usb_serial_probe(struct usb_interface *interface,
 
 	serial->disconnected = 0;
 
-	usb_serial_console_init(serial->port[0]->minor);
+	if (num_ports > 0)
+		usb_serial_console_init(serial->port[0]->minor);
 exit:
 	module_put(type->driver.owner);
 	return 0;
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 79b2b628066d..79451f7ef1b7 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -133,6 +133,13 @@ static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
 		bo[itr] = bi1[itr] ^ bi2[itr];
 }
 
+/* Scratch space for MAC calculations. */
+struct wusb_mac_scratch {
+	struct aes_ccm_b0 b0;
+	struct aes_ccm_b1 b1;
+	struct aes_ccm_a ax;
+};
+
 /*
  * CC-MAC function WUSB1.0[6.5]
  *
@@ -197,16 +204,15 @@ static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
  *       what sg[4] is for. Maybe there is a smarter way to do this.
  */
 static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
-			struct crypto_cipher *tfm_aes, void *mic,
+			struct crypto_cipher *tfm_aes,
+			struct wusb_mac_scratch *scratch,
+			void *mic,
 			const struct aes_ccm_nonce *n,
 			const struct aes_ccm_label *a, const void *b,
 			size_t blen)
 {
 	int result = 0;
 	SKCIPHER_REQUEST_ON_STACK(req, tfm_cbc);
-	struct aes_ccm_b0 b0;
-	struct aes_ccm_b1 b1;
-	struct aes_ccm_a ax;
 	struct scatterlist sg[4], sg_dst;
 	void *dst_buf;
 	size_t dst_size;
@@ -218,16 +224,17 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
 	 * These checks should be compile time optimized out
 	 * ensure @a fills b1's mac_header and following fields
 	 */
-	WARN_ON(sizeof(*a) != sizeof(b1) - sizeof(b1.la));
-	WARN_ON(sizeof(b0) != sizeof(struct aes_ccm_block));
-	WARN_ON(sizeof(b1) != sizeof(struct aes_ccm_block));
-	WARN_ON(sizeof(ax) != sizeof(struct aes_ccm_block));
+	WARN_ON(sizeof(*a) != sizeof(scratch->b1) - sizeof(scratch->b1.la));
+	WARN_ON(sizeof(scratch->b0) != sizeof(struct aes_ccm_block));
+	WARN_ON(sizeof(scratch->b1) != sizeof(struct aes_ccm_block));
+	WARN_ON(sizeof(scratch->ax) != sizeof(struct aes_ccm_block));
 
 	result = -ENOMEM;
 	zero_padding = blen % sizeof(struct aes_ccm_block);
 	if (zero_padding)
 		zero_padding = sizeof(struct aes_ccm_block) - zero_padding;
-	dst_size = blen + sizeof(b0) + sizeof(b1) + zero_padding;
+	dst_size = blen + sizeof(scratch->b0) + sizeof(scratch->b1) +
+		zero_padding;
 	dst_buf = kzalloc(dst_size, GFP_KERNEL);
 	if (!dst_buf)
 		goto error_dst_buf;
@@ -235,9 +242,9 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
 	memset(iv, 0, sizeof(iv));
 
 	/* Setup B0 */
-	b0.flags = 0x59;	/* Format B0 */
-	b0.ccm_nonce = *n;
-	b0.lm = cpu_to_be16(0);	/* WUSB1.0[6.5] sez l(m) is 0 */
+	scratch->b0.flags = 0x59;	/* Format B0 */
+	scratch->b0.ccm_nonce = *n;
+	scratch->b0.lm = cpu_to_be16(0);	/* WUSB1.0[6.5] sez l(m) is 0 */
 
 	/* Setup B1
 	 *
@@ -246,12 +253,12 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
 	 * 14'--after clarification, it means to use A's contents
 	 * for MAC Header, EO, sec reserved and padding.
 	 */
-	b1.la = cpu_to_be16(blen + 14);
-	memcpy(&b1.mac_header, a, sizeof(*a));
+	scratch->b1.la = cpu_to_be16(blen + 14);
+	memcpy(&scratch->b1.mac_header, a, sizeof(*a));
 
 	sg_init_table(sg, ARRAY_SIZE(sg));
-	sg_set_buf(&sg[0], &b0, sizeof(b0));
-	sg_set_buf(&sg[1], &b1, sizeof(b1));
+	sg_set_buf(&sg[0], &scratch->b0, sizeof(scratch->b0));
+	sg_set_buf(&sg[1], &scratch->b1, sizeof(scratch->b1));
 	sg_set_buf(&sg[2], b, blen);
 	/* 0 if well behaved :) */
 	sg_set_buf(&sg[3], bzero, zero_padding);
@@ -276,11 +283,12 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
 	 * POS Crypto API: size is assumed to be AES's block size.
 	 * Thanks for documenting it -- tip taken from airo.c
 	 */
-	ax.flags = 0x01;		/* as per WUSB 1.0 spec */
-	ax.ccm_nonce = *n;
-	ax.counter = 0;
-	crypto_cipher_encrypt_one(tfm_aes, (void *)&ax, (void *)&ax);
-	bytewise_xor(mic, &ax, iv, 8);
+	scratch->ax.flags = 0x01;		/* as per WUSB 1.0 spec */
+	scratch->ax.ccm_nonce = *n;
+	scratch->ax.counter = 0;
+	crypto_cipher_encrypt_one(tfm_aes, (void *)&scratch->ax,
+				  (void *)&scratch->ax);
+	bytewise_xor(mic, &scratch->ax, iv, 8);
 	result = 8;
 error_cbc_crypt:
 	kfree(dst_buf);
@@ -303,6 +311,7 @@ ssize_t wusb_prf(void *out, size_t out_size,
 	struct aes_ccm_nonce n = *_n;
 	struct crypto_skcipher *tfm_cbc;
 	struct crypto_cipher *tfm_aes;
+	struct wusb_mac_scratch *scratch;
 	u64 sfn = 0;
 	__le64 sfn_le;
 
@@ -329,17 +338,25 @@ ssize_t wusb_prf(void *out, size_t out_size,
 		printk(KERN_ERR "E: can't set AES key: %d\n", (int)result);
 		goto error_setkey_aes;
 	}
+	scratch = kmalloc(sizeof(*scratch), GFP_KERNEL);
+	if (!scratch) {
+		result = -ENOMEM;
+		goto error_alloc_scratch;
+	}
 
 	for (bitr = 0; bitr < (len + 63) / 64; bitr++) {
 		sfn_le = cpu_to_le64(sfn++);
 		memcpy(&n.sfn, &sfn_le, sizeof(n.sfn));	/* n.sfn++... */
-		result = wusb_ccm_mac(tfm_cbc, tfm_aes, out + bytes,
+		result = wusb_ccm_mac(tfm_cbc, tfm_aes, scratch, out + bytes,
 				      &n, a, b, blen);
 		if (result < 0)
 			goto error_ccm_mac;
 		bytes += result;
 	}
 	result = bytes;
+
+	kfree(scratch);
+error_alloc_scratch:
 error_ccm_mac:
 error_setkey_aes:
 	crypto_free_cipher(tfm_aes);