treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

9 files changed, 82 insertions, 82 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 275568abc670..26475b409b53 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -30,7 +30,7 @@ menuconfig USB_SUPPORT
 	bool "USB support"
 	depends on HAS_IOMEM
 	default y
-	---help---
+	help
 	  This option adds core support for Universal Serial Bus (USB).
 	  You will also need drivers from the following menu to make use of it.
 
@@ -47,7 +47,7 @@ config USB
 	select GENERIC_ALLOCATOR
 	select USB_COMMON
 	select NLS  # for UTF-8 strings
-	---help---
+	help
 	  Universal Serial Bus (USB) is a specification for a serial bus
 	  subsystem which offers higher speeds and more features than the
 	  traditional PC serial port.  The bus supplies power to peripherals
@@ -83,7 +83,7 @@ config USB_PCI
 	bool "PCI based USB host interface"
 	depends on PCI
 	default y
-	---help---
+	help
 	  Many embedded system SOCs (e.g. freescale T2080) have both
 	  PCI and USB modules with the USB module directly controlled by
 	  registers and having no relationship to the PCI module.
@@ -133,7 +133,7 @@ config USB_USS720
 	tristate "USS720 parport driver"
 	depends on PARPORT
 	select PARPORT_NOT_PC
-	---help---
+	help
 	  This driver is for USB parallel port adapters that use the Lucent
 	  Technologies USS-720 chip. These cables are plugged into your USB
 	  port and provide USB compatibility to peripherals designed with
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
index f8a798900093..d3f5162bd67e 100644
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
@@ -7,7 +7,7 @@ comment "USB Device Class drivers"
 config USB_ACM
 	tristate "USB Modem (CDC ACM) support"
 	depends on TTY
-	---help---
+	help
 	  This driver supports USB modems and ISDN adapters which support the
 	  Communication Device Class Abstract Control Model interface.
 	  Please read <file:Documentation/usb/acm.rst> for details.
@@ -30,7 +30,7 @@ config USB_PRINTER
 
 config USB_WDM
 	tristate "USB Wireless Device Management support"
-	---help---
+	help
 	  This driver supports the WMC Device Management functionality
 	  of cell phones compliant to the CDC WMC specification. You can use
 	  AT commands over this device.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 62c348062e48..1cb3004ea7b2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -20,7 +20,7 @@ config USB_C67X00_HCD
 config USB_XHCI_HCD
 	tristate "xHCI HCD (USB 3.0) support"
 	depends on HAS_DMA && HAS_IOMEM
-	---help---
+	help
 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
 	  "SuperSpeed" host controller hardware.
 
@@ -31,7 +31,7 @@ if USB_XHCI_HCD
 config USB_XHCI_DBGCAP
 	bool "xHCI support for debug capability"
 	depends on TTY
-	---help---
+	help
 	  Say 'Y' to enable the support for the xHCI debug capability. Make
 	  sure that your xHCI host supports the extended debug capability and
 	  you want a TTY serial device based on the xHCI debug capability
@@ -45,7 +45,7 @@ config USB_XHCI_PCI
 
 config USB_XHCI_PCI_RENESAS
 	tristate "Support for additional Renesas xHCI controller with firwmare"
-	---help---
+	help
 	  Say 'Y' to enable the support for the Renesas xHCI controller with
 	  firwmare. Make sure you have the firwmare for the device and
 	  installed on your system for this device to work.
@@ -54,7 +54,7 @@ config USB_XHCI_PCI_RENESAS
 config USB_XHCI_PLATFORM
 	tristate "Generic xHCI driver for a platform device"
 	select USB_XHCI_RCAR if ARCH_RENESAS
-	---help---
+	help
 	  Adds an xHCI host driver for a generic platform device, which
 	  provides a memory space and an irq.
 	  It is also a prerequisite for platform specific drivers that
@@ -73,7 +73,7 @@ config USB_XHCI_MTK
 	tristate "xHCI support for MediaTek SoCs"
 	select MFD_SYSCON
 	depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
-	---help---
+	help
 	  Say 'Y' to enable the support for the xHCI host controller
 	  found in MediaTek SoCs.
 	  If unsure, say N.
@@ -83,7 +83,7 @@ config USB_XHCI_MVEBU
 	select USB_XHCI_PLATFORM
 	depends on HAS_IOMEM
 	depends on ARCH_MVEBU || COMPILE_TEST
-	---help---
+	help
 	  Say 'Y' to enable the support for the xHCI host controller
 	  found in Marvell Armada 375/38x/37xx ARM SOCs.
 
@@ -91,7 +91,7 @@ config USB_XHCI_RCAR
 	tristate "xHCI support for Renesas R-Car SoCs"
 	depends on USB_XHCI_PLATFORM
 	depends on ARCH_RENESAS || COMPILE_TEST
-	---help---
+	help
 	  Say 'Y' to enable the support for the xHCI host controller
 	  found in Renesas R-Car ARM SoCs.
 
@@ -100,7 +100,7 @@ config USB_XHCI_TEGRA
 	depends on PHY_TEGRA_XUSB
 	depends on RESET_CONTROLLER
 	select FW_LOADER
-	---help---
+	help
 	  Say 'Y' to enable the support for the xHCI host controller
 	  found in NVIDIA Tegra124 and later SoCs.
 
@@ -129,7 +129,7 @@ config USB_BRCMSTB
 config USB_EHCI_HCD
 	tristate "EHCI HCD (USB 2.0) support"
 	depends on HAS_DMA && HAS_IOMEM
-	---help---
+	help
 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
 	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
 	  If your USB host controller supports USB 2.0, you will likely want to
@@ -151,7 +151,7 @@ config USB_EHCI_HCD
 config USB_EHCI_ROOT_HUB_TT
 	bool "Root Hub Transaction Translators"
 	depends on USB_EHCI_HCD
-	---help---
+	help
 	  Some EHCI chips have vendor-specific extensions to integrate
 	  transaction translators, so that no OHCI or UHCI companion
 	  controller is needed.  It's safe to say "y" even if your
@@ -164,7 +164,7 @@ config USB_EHCI_TT_NEWSCHED
 	bool "Improved Transaction Translator scheduling"
 	depends on USB_EHCI_HCD
 	default y
-	---help---
+	help
 	  This changes the periodic scheduling code to fill more of the low
 	  and full speed bandwidth available from the Transaction Translator
 	  (TT) in USB 2.0 hubs.  Without this, only one transfer will be
@@ -192,7 +192,7 @@ config USB_EHCI_HCD_PMC_MSP
 	depends on MSP_HAS_USB
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
-	---help---
+	help
 		Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
 		If unsure, say N.
 
@@ -201,7 +201,7 @@ config XPS_USB_HCD_XILINX
 	depends on (PPC32 || MICROBLAZE)
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
-	---help---
+	help
 		Xilinx xps USB host controller core is EHCI compliant and has
 		transaction translator built-in. It can be configured to either
 		support both high speed and full speed devices, or high speed
@@ -210,14 +210,14 @@ config XPS_USB_HCD_XILINX
 config USB_EHCI_FSL
 	tristate "Support for Freescale on-chip EHCI USB controller"
 	select USB_EHCI_ROOT_HUB_TT
-	---help---
+	help
 	  Variation of ARC USB block used in some Freescale chips.
 
 config USB_EHCI_MXC
 	tristate "Support for Freescale i.MX on-chip EHCI USB controller"
 	depends on ARCH_MXC || COMPILE_TEST
 	select USB_EHCI_ROOT_HUB_TT
-	---help---
+	help
 	  Variation of ARC USB block used in some Freescale chips.
 
 config USB_EHCI_HCD_NPCM7XX
@@ -233,7 +233,7 @@ config USB_EHCI_HCD_OMAP
 	depends on ARCH_OMAP
 	depends on NOP_USB_XCEIV
 	default y
-	---help---
+	help
 	  Enables support for the on-chip EHCI controller on
 	  OMAP3 and later chips.
 
@@ -241,7 +241,7 @@ config USB_EHCI_HCD_ORION
 	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST)
 	default y if (PLAT_ORION || ARCH_MVEBU)
-	---help---
+	help
 	  Enables support for the on-chip EHCI controller on Marvell's
 	  embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
 	  Armada 370.  This is different from the EHCI implementation
@@ -252,7 +252,7 @@ config USB_EHCI_HCD_SPEAR
 	tristate "Support for ST SPEAr on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
 	default y if PLAT_SPEAR
-	---help---
+	help
 	  Enables support for the on-chip EHCI controller on
 	  ST SPEAr chips.
 
@@ -269,7 +269,7 @@ config USB_EHCI_HCD_AT91
 	tristate  "Support for Atmel on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST)
 	default y if ARCH_AT91
-	---help---
+	help
 	  Enables support for the on-chip EHCI controller on
 	  Atmel chips.
 
@@ -286,14 +286,14 @@ config USB_EHCI_HCD_PPC_OF
 	bool "EHCI support for PPC USB controller on OF platform bus"
 	depends on PPC
 	default y
-	---help---
+	help
 	  Enables support for the USB controller present on the PowerPC
 	  OpenFirmware platform bus.
 
 config USB_EHCI_SH
 	bool "EHCI support for SuperH USB controller"
 	depends on SUPERH || COMPILE_TEST
-	---help---
+	help
 	  Enables support for the on-chip EHCI controller on the SuperH.
 	  If you use the PCI EHCI controller, this option is not necessary.
 
@@ -307,7 +307,7 @@ config USB_EHCI_MV
 	tristate "EHCI support for Marvell PXA/MMP USB controller"
 	depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
 	select USB_EHCI_ROOT_HUB_TT
-	---help---
+	help
 	  Enables support for Marvell (including PXA and MMP series) on-chip
 	  USB SPH and OTG controller. SPH is a single port host, and it can
 	  only be EHCI host. OTG is controller that can switch to host mode.
@@ -320,7 +320,7 @@ config USB_CNS3XXX_EHCI
 	bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
 	depends on ARCH_CNS3XXX || COMPILE_TEST
 	select USB_EHCI_HCD_PLATFORM
-	---help---
+	help
 	  This option is deprecated now and the driver was removed, use
 	  USB_EHCI_HCD_PLATFORM instead.
 
@@ -330,7 +330,7 @@ config USB_CNS3XXX_EHCI
 
 config USB_EHCI_HCD_PLATFORM
 	tristate "Generic EHCI driver for a platform device"
-	---help---
+	help
 	  Adds an EHCI host driver for a generic platform device, which
 	  provides a memory space and an irq.
 
@@ -355,7 +355,7 @@ endif # USB_EHCI_HCD
 config USB_OXU210HP_HCD
 	tristate "OXU210HP HCD support"
 	depends on HAS_IOMEM
-	---help---
+	help
 	  The OXU210HP is an USB host/OTG/device controller. Enable this
 	  option if your board has this chip. If unsure, say N.
 
@@ -368,7 +368,7 @@ config USB_OXU210HP_HCD
 config USB_ISP116X_HCD
 	tristate "ISP116X HCD support"
 	depends on HAS_IOMEM
-	---help---
+	help
 	  The ISP1160 and ISP1161 chips are USB host controllers. Enable this
 	  option if your board has this chip. If unsure, say N.
 
@@ -381,7 +381,7 @@ config USB_ISP1362_HCD
 	tristate "ISP1362 HCD support"
 	depends on HAS_IOMEM
 	depends on COMPILE_TEST # nothing uses this
-	---help---
+	help
 	  Supports the Philips ISP1362 chip as a host controller
 
 	  This driver does not support isochronous transfers.
@@ -392,7 +392,7 @@ config USB_ISP1362_HCD
 config USB_FOTG210_HCD
 	tristate "FOTG210 HCD support"
 	depends on USB && HAS_DMA && HAS_IOMEM
-	---help---
+	help
 	  Faraday FOTG210 is an OTG controller which can be configured as
 	  an USB2.0 host. It is designed to meet USB2.0 EHCI specification
 	  with minor modification.
@@ -403,7 +403,7 @@ config USB_FOTG210_HCD
 config USB_MAX3421_HCD
 	tristate "MAX3421 HCD (USB-over-SPI) support"
 	depends on USB && SPI
-	---help---
+	help
 	  The Maxim MAX3421E chip supports standard USB 2.0-compliant
 	  full-speed devices either in host or peripheral mode.  This
 	  driver supports the host-mode of the MAX3421E only.
@@ -414,7 +414,7 @@ config USB_MAX3421_HCD
 config USB_OHCI_HCD
 	tristate "OHCI HCD (USB 1.1) support"
 	depends on HAS_DMA && HAS_IOMEM
-	---help---
+	help
 	  The Open Host Controller Interface (OHCI) is a standard for accessing
 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
 	  UHCI specification.  If your USB host controller follows the OHCI spec,
@@ -434,14 +434,14 @@ config USB_OHCI_HCD_OMAP1
 	depends on ARCH_OMAP1
 	depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
 	default y
-	---help---
+	help
 	  Enables support for the OHCI controller on OMAP1/2 chips.
 
 config USB_OHCI_HCD_SPEAR
 	tristate "Support for ST SPEAr on-chip OHCI USB controller"
 	depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
 	default y if PLAT_SPEAR
-	---help---
+	help
 	  Enables support for the on-chip OHCI controller on
 	  ST SPEAr chips.
 
@@ -458,7 +458,7 @@ config USB_OHCI_HCD_S3C2410
 	tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
 	depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST)
 	default y if (ARCH_S3C24XX || ARCH_S3C64XX)
-	---help---
+	help
 	  Enables support for the on-chip OHCI controller on
 	  S3C24xx/S3C64xx chips.
 
@@ -468,7 +468,7 @@ config USB_OHCI_HCD_LPC32XX
 	depends on ARCH_LPC32XX || COMPILE_TEST
 	depends on USB_ISP1301
 	default y
-	---help---
+	help
 	  Enables support for the on-chip OHCI controller on
 	  NXP chips.
 
@@ -476,7 +476,7 @@ config USB_OHCI_HCD_PXA27X
 	tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
 	depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
 	default y
-	---help---
+	help
 	  Enables support for the on-chip OHCI controller on
 	  PXA27x/PXA3xx chips.
 
@@ -484,7 +484,7 @@ config USB_OHCI_HCD_AT91
 	tristate "Support for Atmel on-chip OHCI USB controller"
 	depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF
 	default y if ARCH_AT91
-	---help---
+	help
 	  Enables support for the on-chip OHCI controller on
 	  Atmel chips.
 
@@ -516,7 +516,7 @@ config USB_OHCI_HCD_PPC_OF_BE
 	depends on PPC
 	select USB_OHCI_BIG_ENDIAN_DESC
 	select USB_OHCI_BIG_ENDIAN_MMIO
-	---help---
+	help
 	  Enables support for big-endian USB controllers present on the
 	  OpenFirmware platform bus.
 
@@ -524,7 +524,7 @@ config USB_OHCI_HCD_PPC_OF_LE
 	bool "OHCI support for OF platform bus (little endian)"
 	depends on PPC
 	select USB_OHCI_LITTLE_ENDIAN
-	---help---
+	help
 	  Enables support for little-endian USB controllers present on the
 	  OpenFirmware platform bus.
 
@@ -538,7 +538,7 @@ config USB_OHCI_HCD_PCI
 	depends on USB_PCI
 	default y
 	select USB_OHCI_LITTLE_ENDIAN
-	---help---
+	help
 	  Enables support for PCI-bus plug-in USB controller cards.
 	  If unsure, say Y.
 
@@ -547,7 +547,7 @@ config USB_OHCI_HCD_SSB
 	depends on (SSB = y || SSB = USB_OHCI_HCD)
 	select USB_HCD_SSB
 	select USB_OHCI_HCD_PLATFORM
-	---help---
+	help
 	  This option is deprecated now and the driver was removed, use
 	  USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
 
@@ -563,7 +563,7 @@ config USB_OHCI_SH
 	bool "OHCI support for SuperH USB controller (DEPRECATED)"
 	depends on SUPERH || COMPILE_TEST
 	select USB_OHCI_HCD_PLATFORM
-	---help---
+	help
 	  This option is deprecated now and the driver was removed, use
 	  USB_OHCI_HCD_PLATFORM instead.
 
@@ -580,7 +580,7 @@ config USB_CNS3XXX_OHCI
 	bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
 	depends on ARCH_CNS3XXX || COMPILE_TEST
 	select USB_OHCI_HCD_PLATFORM
-	---help---
+	help
 	  This option is deprecated now and the driver was removed, use
 	  USB_OHCI_HCD_PLATFORM instead.
 
@@ -589,7 +589,7 @@ config USB_CNS3XXX_OHCI
 
 config USB_OHCI_HCD_PLATFORM
 	tristate "Generic OHCI driver for a platform device"
-	---help---
+	help
 	  Adds an OHCI host driver for a generic platform device, which
 	  provides a memory space and an irq.
 
@@ -615,7 +615,7 @@ endif # USB_OHCI_HCD
 config USB_UHCI_HCD
 	tristate "UHCI HCD (most Intel and VIA) support"
 	depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
-	---help---
+	help
 	  The Universal Host Controller Interface is a standard by Intel for
 	  accessing the USB hardware in the PC (which is also called the USB
 	  host controller). If your USB host controller conforms to this
@@ -777,7 +777,7 @@ config USB_HCD_SSB
 
 config USB_HCD_TEST_MODE
 	bool "HCD test mode support"
-	---help---
+	help
 	  Say 'Y' to enable additional software test modes that may be
 	  supported by the host controller drivers.
 
diff --git a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig
index 26c75f309da9..a65c638e7fc1 100644
--- a/drivers/usb/image/Kconfig
+++ b/drivers/usb/image/Kconfig
@@ -6,7 +6,7 @@ comment "USB Imaging devices"
 
 config USB_MDC800
 	tristate "USB Mustek MDC800 Digital Camera support"
-	---help---
+	help
 	  Say Y here if you want to connect this type of still camera to
 	  your computer's USB port. This driver can be used with gphoto 0.4.3
 	  and higher (look at <http://www.gphoto.org/>).
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 833a460ee55a..4e48f8eed168 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -6,7 +6,7 @@ comment "USB Miscellaneous drivers"
 
 config USB_EMI62
 	tristate "EMI 6|2m USB Audio interface support"
-	---help---
+	help
 	  This driver loads firmware to Emagic EMI 6|2m low latency USB
 	  Audio and Midi interface.
 
@@ -20,7 +20,7 @@ config USB_EMI62
 
 config USB_EMI26
 	tristate "EMI 2|6 USB Audio interface support"
-	---help---
+	help
 	  This driver loads firmware to Emagic EMI 2|6 low latency USB
 	  Audio interface.
 
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index c16121276a21..655d9cb0651a 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -4,7 +4,7 @@ config USB_SISUSBVGA
 	tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
 	depends on (USB_MUSB_HDRC || USB_EHCI_HCD)
 	select FONT_SUPPORT if USB_SISUSBVGA_CON
-	---help---
+	help
 	  Say Y here if you intend to attach a USB2VGA dongle based on a
 	  Net2280 and a SiS315 chip.
 
@@ -18,7 +18,7 @@ config USB_SISUSBVGA_CON
 	bool "Text console and mode switching support" if USB_SISUSBVGA
 	depends on VT
 	select FONT_8x16
-	---help---
+	help
 	  Say Y here if you want a VGA text console via the USB dongle or
 	  want to support userland applications that utilize the driver's
 	  display mode switching capabilities.
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 25d7e0c36d38..4007fa25a8ff 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -6,7 +6,7 @@
 menuconfig USB_SERIAL
 	tristate "USB Serial Converter support"
 	depends on TTY
-	---help---
+	help
 	  Say Y here if you have a USB device that provides normal serial
 	  ports, or acts like a serial device, and you want to connect it to
 	  your USB bus.
@@ -23,7 +23,7 @@ if USB_SERIAL
 config USB_SERIAL_CONSOLE
 	bool "USB Serial Console device support"
 	depends on USB_SERIAL=y
-	---help---
+	help
 	  If you say Y here, it will be possible to use a USB to serial
 	  converter port as the system console (the system console is the
 	  device which receives all kernel messages and warnings and which
@@ -123,7 +123,7 @@ config USB_SERIAL_WHITEHEAT
 
 config USB_SERIAL_DIGI_ACCELEPORT
 	tristate "USB Digi International AccelePort USB Serial Driver"
-	---help---
+	help
 	  Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 	  2 port (plus parallel port) and 4 port USB serial converters.  The
 	  parallel port on the USB 2 appears as a third serial port on Linux.
@@ -168,7 +168,7 @@ config USB_SERIAL_EMPEG
 
 config USB_SERIAL_FTDI_SIO
 	tristate "USB FTDI Single Port Serial Driver"
-	---help---
+	help
 	  Say Y here if you want to use a FTDI SIO single port USB to serial
 	  converter device. The implementation I have is called the USC-1000.
 	  This driver has also been tested with the 245 and 232 devices.
@@ -213,7 +213,7 @@ config USB_SERIAL_IR
 
 config USB_SERIAL_EDGEPORT
 	tristate "USB Inside Out Edgeport Serial Driver"
-	---help---
+	help
 	  Say Y here if you want to use any of the following devices from
 	  Inside Out Networks (Digi):
 	  Edgeport/4
@@ -311,7 +311,7 @@ config USB_SERIAL_KEYSPAN_PDA
 config USB_SERIAL_KEYSPAN
 	tristate "USB Keyspan USA-xxx Serial Driver"
 	select USB_EZUSB_FX2
-	---help---
+	help
 	  Say Y here if you want to use Keyspan USB to serial converter
 	  devices.  This driver makes use of Keyspan's official firmware
 	  and was developed with their support.  You must also include
@@ -324,7 +324,7 @@ config USB_SERIAL_KEYSPAN
 
 config USB_SERIAL_KLSI
 	tristate "USB KL5KUSB105 (Palmconnect) Driver"
-	---help---
+	help
 	  Say Y here if you want to use a KL5KUSB105 - based single port
 	  serial adapter. The most widely known -- and currently the only
 	  tested -- device in this category is the PalmConnect USB Serial
@@ -339,7 +339,7 @@ config USB_SERIAL_KLSI
 
 config USB_SERIAL_KOBIL_SCT
 	tristate "USB KOBIL chipcard reader"
-	---help---
+	help
 	  Say Y here if you want to use one of the following KOBIL USB chipcard
 	  readers:
 
@@ -356,7 +356,7 @@ config USB_SERIAL_KOBIL_SCT
 
 config USB_SERIAL_MCT_U232
 	tristate "USB MCT Single Port Serial Driver"
-	---help---
+	help
 	  Say Y here if you want to use a USB Serial single port adapter from
 	  Magic Control Technology Corp. (U232 is one of the model numbers).
 
@@ -368,7 +368,7 @@ config USB_SERIAL_MCT_U232
 
 config USB_SERIAL_METRO
 	tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
-	---help---
+	help
 	  Say Y here if you want to use a USB POS Metrologic barcode scanner.
 
 	  To compile this driver as a module, choose M here: the
@@ -376,7 +376,7 @@ config USB_SERIAL_METRO
 
 config USB_SERIAL_MOS7720
 	tristate "USB Moschip 7720 Serial Driver"
-	---help---
+	help
 	  Say Y here if you want to use USB Serial single and double
 	  port adapters from Moschip Semiconductor Tech.
 
@@ -388,14 +388,14 @@ config USB_SERIAL_MOS7715_PARPORT
 	depends on USB_SERIAL_MOS7720
 	depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
 	select PARPORT_NOT_PC
-	---help---
+	help
 	Say Y if you have a Moschip 7715 device and would like to use
 	the parallel port it provides.  The port will register with
 	the parport subsystem as a low-level driver.
 
 config USB_SERIAL_MOS7840
 	tristate "USB Moschip 7840/7820 USB Serial Driver"
-	---help---
+	help
 	  Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
 	  Dual-Serial port device from MosChip Semiconductor.
 
@@ -409,7 +409,7 @@ config USB_SERIAL_MOS7840
 
 config USB_SERIAL_MXUPORT
 	tristate "USB Moxa UPORT Serial Driver"
-	---help---
+	help
 	  Say Y here if you want to use a MOXA UPort Serial hub.
 
 	  This driver supports:
@@ -528,7 +528,7 @@ config USB_SERIAL_TI
 
 config USB_SERIAL_CYBERJACK
 	tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
-	---help---
+	help
 	  Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 	  reader. This is an interface to ISO 7816 compatible contact-based
 	  chipcards, e.g. GSM SIMs.
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 59aad38b490a..5335a7ff5d14 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -9,7 +9,7 @@ comment "also be needed; see USB_STORAGE Help for more info"
 config USB_STORAGE
 	tristate "USB Mass Storage support"
 	depends on SCSI
-	---help---
+	help
 	  Say Y here if you want to connect USB mass storage devices to your
 	  computer's USB port. This is the driver you need for USB
 	  floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
@@ -63,7 +63,7 @@ config USB_STORAGE_FREECOM
 
 config USB_STORAGE_ISD200
 	tristate "ISD-200 USB/ATA Bridge support"
-	---help---
+	help
 	  Say Y here if you want to use USB Mass Store devices based
 	  on the In-Systems Design ISD-200 USB/ATA bridge.
 
@@ -165,7 +165,7 @@ config USB_STORAGE_KARMA
 
 config USB_STORAGE_CYPRESS_ATACB
 	tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
-	---help---
+	help
 	  Say Y here if you want to use SAT (ata pass through) on devices based
 	  on the Cypress USB/ATA bridge supporting ATACB. This will allow you
 	  to use tools to tune and monitor your drive (like hdparm or smartctl).
@@ -177,7 +177,7 @@ config USB_STORAGE_CYPRESS_ATACB
 
 config USB_STORAGE_ENE_UB6250
 	tristate "USB ENE card reader support"
-	---help---
+	help
 	  Say Y here if you wish to control a ENE SD/MS Card reader.
 	  Note that this driver does not support SM cards.
 
diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig
index 7bbae7a08642..b9f94e2e278d 100644
--- a/drivers/usb/usbip/Kconfig
+++ b/drivers/usb/usbip/Kconfig
@@ -5,7 +5,7 @@ config USBIP_CORE
 	depends on NET
 	select USB_COMMON
 	select SGL_ALLOC
-	---help---
+	help
 	  This enables pushing USB packets over IP to allow remote
 	  machines direct access to USB devices. It provides the
 	  USB/IP core that is required by both drivers.
@@ -21,7 +21,7 @@ config USBIP_CORE
 config USBIP_VHCI_HCD
 	tristate "VHCI hcd"
 	depends on USBIP_CORE && USB
-	---help---
+	help
 	  This enables the USB/IP virtual host controller driver,
 	  which is run on the remote machine.
 
@@ -33,7 +33,7 @@ config USBIP_VHCI_HC_PORTS
 	range 1 15
 	default 8
 	depends on USBIP_VHCI_HCD
-	---help---
+	help
 	  To increase number of ports available for USB/IP virtual
 	  host controller driver, this defines number of ports per
 	  USB/IP virtual host controller.
@@ -43,7 +43,7 @@ config USBIP_VHCI_NR_HCS
 	range 1 128
 	default 1
 	depends on USBIP_VHCI_HCD
-	---help---
+	help
 	  To increase number of ports available for USB/IP virtual
 	  host controller driver, this defines number of USB/IP
 	  virtual host controllers as if adding physical host
@@ -52,7 +52,7 @@ config USBIP_VHCI_NR_HCS
 config USBIP_HOST
 	tristate "Host driver"
 	depends on USBIP_CORE && USB
-	---help---
+	help
 	  This enables the USB/IP host driver, which is run on the
 	  machine that is sharing the USB devices.
 
@@ -62,7 +62,7 @@ config USBIP_HOST
 config USBIP_VUDC
 	tristate "VUDC driver"
 	depends on USBIP_CORE && USB_GADGET
-	---help---
+	help
 	  This enables the USB/IP virtual USB device controller
 	  driver, which is run on the host machine, allowing the
 	  machine itself to act as a device.
@@ -73,5 +73,5 @@ config USBIP_VUDC
 config USBIP_DEBUG
 	bool "Debug messages for USB/IP"
 	depends on USBIP_CORE
-	---help---
+	help
 	  This enables the debug messages from the USB/IP drivers.