USB: Fix the issue of task recovery failure caused by USB status when S4 wakes up

When a device is inserted into the USB port and an S4 wakeup is initiated,
after the USB-hub initialization is completed, it will automatically enter
suspend mode. Upon detecting a device on the USB port, it will proceed with
resume and set the hcd to the HCD_FLAG_WAKEUP_PENDING state. During the S4
wakeup process, peripherals are put into suspend mode, followed by task
recovery. However, upon detecting that the hcd is in the
HCD_FLAG_WAKEUP_PENDING state, it will return an EBUSY status, causing the
S4 suspend to fail and subsequent task recovery to not proceed.
-
[   27.594598][ 1]  PM: pci_pm_freeze(): hcd_pci_suspend+0x0/0x28 returns -16
[   27.594601][ 1]  PM: dpm_run_callback(): pci_pm_freeze+0x0/0x100 returns -16
[   27.603420][ 1]  ehci-pci 0000:00:04.1: pci_pm_freeze+0x0/0x100 returned 0 after 3 usecs
[   27.612233][ 1]  ehci-pci 0000:00:05.1: pci_pm_freeze+0x0/0x100 returned -16 after 17223 usecs
[   27.810067][ 1]  PM: Device 0000:00:05.1 failed to quiesce async: error -16
[   27.816988][ 1]  PM: quiesce of devices aborted after 1833.282 msecs
[   27.823302][ 1]  PM: start quiesce of devices aborted after 1839.975 msecs
......
[   31.303172][ 1]  PM: recover of devices complete after 3473.039 msecs
[   31.309818][ 1]  PM: Failed to load hibernation image, recovering.
[   31.348188][ 1]  PM: Basic memory bitmaps freed
[   31.352686][ 1]  OOM killer enabled.
[   31.356232][ 1]  Restarting tasks ... done.
[   31.360609][ 1]  PM: resume from hibernation failed (0)
[   31.365800][ 1]  PM: Hibernation image not present or could not be loaded.

The "do_wakeup" is determined based on whether the controller's
power/wakeup attribute is set. The current issue necessitates considering
the type of suspend that is occurring. If the suspend type is either
PM_EVENT_FREEZE or PM_EVENT_QUIESCE, then "do_wakeup" should be set to
false.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410151722.rfjtknRz-lkp@intel.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Duan Chenghao <duanchenghao@kylinos.cn>
Link: https://lore.kernel.org/r/20241024024038.26157-1-duanchenghao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 13 insertions, 2 deletions

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index a08f3f228e6d..56b534f59907 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -422,7 +422,12 @@ static int suspend_common(struct device *dev, pm_message_t msg)
 	bool			do_wakeup;
 	int			retval;
 
-	do_wakeup = PMSG_IS_AUTO(msg) ? true : device_may_wakeup(dev);
+	if (PMSG_IS_AUTO(msg))
+		do_wakeup = true;
+	else if (PMSG_NO_WAKEUP(msg))
+		do_wakeup = false;
+	else
+		do_wakeup = device_may_wakeup(dev);
 
 	/* Root hub suspend should have stopped all downstream traffic,
 	 * and all bus master traffic.  And done so for both the interface
@@ -521,6 +526,11 @@ static int hcd_pci_suspend(struct device *dev)
 	return suspend_common(dev, PMSG_SUSPEND);
 }
 
+static int hcd_pci_freeze(struct device *dev)
+{
+	return suspend_common(dev, PMSG_FREEZE);
+}
+
 static int hcd_pci_suspend_noirq(struct device *dev)
 {
 	struct pci_dev		*pci_dev = to_pci_dev(dev);
@@ -590,6 +600,7 @@ static int hcd_pci_restore(struct device *dev)
 #else
 
 #define hcd_pci_suspend		NULL
+#define hcd_pci_freeze			NULL
 #define hcd_pci_suspend_noirq	NULL
 #define hcd_pci_poweroff_late	NULL
 #define hcd_pci_resume_noirq	NULL
@@ -624,7 +635,7 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 	.suspend_noirq	= hcd_pci_suspend_noirq,
 	.resume_noirq	= hcd_pci_resume_noirq,
 	.resume		= hcd_pci_resume,
-	.freeze		= hcd_pci_suspend,
+	.freeze		= hcd_pci_freeze,
 	.freeze_noirq	= check_root_hub_suspended,
 	.thaw_noirq	= NULL,
 	.thaw		= hcd_pci_resume,