diff options
author | Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> | 2019-06-03 10:25:08 +0300 |
---|---|---|
committer | Lee Jones <lee.jones@linaro.org> | 2019-06-27 10:57:24 +0100 |
commit | 21b7c58fc1943f3aa8c18a994ab9bed4ae5aa72d (patch) | |
tree | c6e650600dfe6c644e1e7e7046574986629f345f /drivers | |
parent | 2a6a7aacd4e557a4c7007f8858bcc9654b098fea (diff) | |
download | linux-stable-21b7c58fc1943f3aa8c18a994ab9bed4ae5aa72d.tar.gz linux-stable-21b7c58fc1943f3aa8c18a994ab9bed4ae5aa72d.tar.bz2 linux-stable-21b7c58fc1943f3aa8c18a994ab9bed4ae5aa72d.zip |
mfd: bd70528: Support ROHM bd70528 PMIC core
ROHM BD70528MWV is an ultra-low quiescent current general
purpose single-chip power management IC for battery-powered
portable devices.
Add MFD core which enables chip access for following subdevices:
- regulators/LED drivers
- battery-charger
- gpios
- 32.768kHz clk
- RTC
- watchdog
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mfd/Kconfig | 17 | ||||
-rw-r--r-- | drivers/mfd/Makefile | 2 | ||||
-rw-r--r-- | drivers/mfd/rohm-bd70528.c | 316 |
3 files changed, 335 insertions, 0 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 294d9567cc71..11fc53d78c5f 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1890,6 +1890,23 @@ config MFD_ROHM_BD718XX NXP i.MX8. It contains 8 BUCK outputs and 7 LDOs, voltage monitoring and emergency shut down as well as 32,768KHz clock output. +config MFD_ROHM_BD70528 + tristate "ROHM BD70528 Power Management IC" + depends on I2C=y + depends on OF + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + Select this option to get support for the ROHM BD70528 Power + Management IC. BD71837 is general purpose single-chip power + management IC for battery-powered portable devices. It contains + 3 ultra-low current consumption buck converters, 3 LDOs and 2 LED + drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz + crystal oscillator, high-accuracy VREF for use with an external ADC, + 10 bits SAR ADC for battery temperature monitor and 1S battery + charger. + config MFD_STM32_LPTIMER tristate "Support for STM32 Low-Power Timer" depends on (ARCH_STM32 && OF) || COMPILE_TEST diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 52b1a90ff515..643d65bcb6ea 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -247,5 +247,7 @@ obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o +obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o obj-$(CONFIG_MFD_STMFX) += stmfx.o + diff --git a/drivers/mfd/rohm-bd70528.c b/drivers/mfd/rohm-bd70528.c new file mode 100644 index 000000000000..55599d5c5c86 --- /dev/null +++ b/drivers/mfd/rohm-bd70528.c @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// +// Copyright (C) 2019 ROHM Semiconductors +// +// ROHM BD70528 PMIC driver + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/rohm-bd70528.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/types.h> + +#define BD70528_NUM_OF_GPIOS 4 + +static const struct resource rtc_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD70528_INT_RTC_ALARM, "bd70528-rtc-alm"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_ELPS_TIM, "bd70528-elapsed-timer"), +}; + +static const struct resource charger_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_OV_RES, "bd70528-bat-ov-res"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_OV_DET, "bd70528-bat-ov-det"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_DBAT_DET, "bd70528-bat-dead"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_COLD_RES, "bd70528-bat-warmed"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_COLD_DET, "bd70528-bat-cold"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_HOT_RES, "bd70528-bat-cooled"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_BATTSD_HOT_DET, "bd70528-bat-hot"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_CHG_TSD, "bd70528-chg-tshd"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_RMV, "bd70528-bat-removed"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_BAT_DET, "bd70528-bat-detected"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_OV_RES, "bd70528-dcin2-ov-res"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_OV_DET, "bd70528-dcin2-ov-det"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_RMV, "bd70528-dcin2-removed"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN2_DET, "bd70528-dcin2-detected"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN1_RMV, "bd70528-dcin1-removed"), + DEFINE_RES_IRQ_NAMED(BD70528_INT_DCIN1_DET, "bd70528-dcin1-detected"), +}; + +static struct mfd_cell bd70528_mfd_cells[] = { + { .name = "bd70528-pmic", }, + { .name = "bd70528-gpio", }, + /* + * We use BD71837 driver to drive the clock block. Only differences to + * BD70528 clock gate are the register address and mask. + */ + { .name = "bd718xx-clk", }, + { .name = "bd70528-wdt", }, + { + .name = "bd70528-power", + .resources = charger_irqs, + .num_resources = ARRAY_SIZE(charger_irqs), + }, { + .name = "bd70528-rtc", + .resources = rtc_irqs, + .num_resources = ARRAY_SIZE(rtc_irqs), + }, +}; + +static const struct regmap_range volatile_ranges[] = { + { + .range_min = BD70528_REG_INT_MAIN, + .range_max = BD70528_REG_INT_OP_FAIL, + }, { + .range_min = BD70528_REG_RTC_COUNT_H, + .range_max = BD70528_REG_RTC_ALM_REPEAT, + }, { + /* + * WDT control reg is special. Magic values must be written to + * it in order to change the control. Should not be cached. + */ + .range_min = BD70528_REG_WDT_CTRL, + .range_max = BD70528_REG_WDT_CTRL, + }, { + /* + * BD70528 also contains a few other registers which require + * magic sequences to be written in order to update the value. + * At least SHIPMODE, HWRESET, WARMRESET,and STANDBY + */ + .range_min = BD70528_REG_SHIPMODE, + .range_max = BD70528_REG_STANDBY, + }, +}; + +static const struct regmap_access_table volatile_regs = { + .yes_ranges = &volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(volatile_ranges), +}; + +static struct regmap_config bd70528_regmap = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &volatile_regs, + .max_register = BD70528_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; + +/* + * Mapping of main IRQ register bits to sub-IRQ register offsets so that we can + * access corect sub-IRQ registers based on bits that are set in main IRQ + * register. + */ + +/* bit [0] - Shutdown register */ +unsigned int bit0_offsets[] = {0}; /* Shutdown register */ +unsigned int bit1_offsets[] = {1}; /* Power failure register */ +unsigned int bit2_offsets[] = {2}; /* VR FAULT register */ +unsigned int bit3_offsets[] = {3}; /* PMU register interrupts */ +unsigned int bit4_offsets[] = {4, 5}; /* Charger 1 and Charger 2 registers */ +unsigned int bit5_offsets[] = {6}; /* RTC register */ +unsigned int bit6_offsets[] = {7}; /* GPIO register */ +unsigned int bit7_offsets[] = {8}; /* Invalid operation register */ + +static struct regmap_irq_sub_irq_map bd70528_sub_irq_offsets[] = { + REGMAP_IRQ_MAIN_REG_OFFSET(bit0_offsets), + REGMAP_IRQ_MAIN_REG_OFFSET(bit1_offsets), + REGMAP_IRQ_MAIN_REG_OFFSET(bit2_offsets), + REGMAP_IRQ_MAIN_REG_OFFSET(bit3_offsets), + REGMAP_IRQ_MAIN_REG_OFFSET(bit4_offsets), + REGMAP_IRQ_MAIN_REG_OFFSET(bit5_offsets), + REGMAP_IRQ_MAIN_REG_OFFSET(bit6_offsets), + REGMAP_IRQ_MAIN_REG_OFFSET(bit7_offsets), +}; + +static struct regmap_irq bd70528_irqs[] = { + REGMAP_IRQ_REG(BD70528_INT_LONGPUSH, 0, BD70528_INT_LONGPUSH_MASK), + REGMAP_IRQ_REG(BD70528_INT_WDT, 0, BD70528_INT_WDT_MASK), + REGMAP_IRQ_REG(BD70528_INT_HWRESET, 0, BD70528_INT_HWRESET_MASK), + REGMAP_IRQ_REG(BD70528_INT_RSTB_FAULT, 0, BD70528_INT_RSTB_FAULT_MASK), + REGMAP_IRQ_REG(BD70528_INT_VBAT_UVLO, 0, BD70528_INT_VBAT_UVLO_MASK), + REGMAP_IRQ_REG(BD70528_INT_TSD, 0, BD70528_INT_TSD_MASK), + REGMAP_IRQ_REG(BD70528_INT_RSTIN, 0, BD70528_INT_RSTIN_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK1_FAULT, 1, + BD70528_INT_BUCK1_FAULT_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK2_FAULT, 1, + BD70528_INT_BUCK2_FAULT_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK3_FAULT, 1, + BD70528_INT_BUCK3_FAULT_MASK), + REGMAP_IRQ_REG(BD70528_INT_LDO1_FAULT, 1, BD70528_INT_LDO1_FAULT_MASK), + REGMAP_IRQ_REG(BD70528_INT_LDO2_FAULT, 1, BD70528_INT_LDO2_FAULT_MASK), + REGMAP_IRQ_REG(BD70528_INT_LDO3_FAULT, 1, BD70528_INT_LDO3_FAULT_MASK), + REGMAP_IRQ_REG(BD70528_INT_LED1_FAULT, 1, BD70528_INT_LED1_FAULT_MASK), + REGMAP_IRQ_REG(BD70528_INT_LED2_FAULT, 1, BD70528_INT_LED2_FAULT_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK1_OCP, 2, BD70528_INT_BUCK1_OCP_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK2_OCP, 2, BD70528_INT_BUCK2_OCP_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK3_OCP, 2, BD70528_INT_BUCK3_OCP_MASK), + REGMAP_IRQ_REG(BD70528_INT_LED1_OCP, 2, BD70528_INT_LED1_OCP_MASK), + REGMAP_IRQ_REG(BD70528_INT_LED2_OCP, 2, BD70528_INT_LED2_OCP_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK1_FULLON, 2, + BD70528_INT_BUCK1_FULLON_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK2_FULLON, 2, + BD70528_INT_BUCK2_FULLON_MASK), + REGMAP_IRQ_REG(BD70528_INT_SHORTPUSH, 3, BD70528_INT_SHORTPUSH_MASK), + REGMAP_IRQ_REG(BD70528_INT_AUTO_WAKEUP, 3, + BD70528_INT_AUTO_WAKEUP_MASK), + REGMAP_IRQ_REG(BD70528_INT_STATE_CHANGE, 3, + BD70528_INT_STATE_CHANGE_MASK), + REGMAP_IRQ_REG(BD70528_INT_BAT_OV_RES, 4, BD70528_INT_BAT_OV_RES_MASK), + REGMAP_IRQ_REG(BD70528_INT_BAT_OV_DET, 4, BD70528_INT_BAT_OV_DET_MASK), + REGMAP_IRQ_REG(BD70528_INT_DBAT_DET, 4, BD70528_INT_DBAT_DET_MASK), + REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_RES, 4, + BD70528_INT_BATTSD_COLD_RES_MASK), + REGMAP_IRQ_REG(BD70528_INT_BATTSD_COLD_DET, 4, + BD70528_INT_BATTSD_COLD_DET_MASK), + REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_RES, 4, + BD70528_INT_BATTSD_HOT_RES_MASK), + REGMAP_IRQ_REG(BD70528_INT_BATTSD_HOT_DET, 4, + BD70528_INT_BATTSD_HOT_DET_MASK), + REGMAP_IRQ_REG(BD70528_INT_CHG_TSD, 4, BD70528_INT_CHG_TSD_MASK), + REGMAP_IRQ_REG(BD70528_INT_BAT_RMV, 5, BD70528_INT_BAT_RMV_MASK), + REGMAP_IRQ_REG(BD70528_INT_BAT_DET, 5, BD70528_INT_BAT_DET_MASK), + REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_RES, 5, + BD70528_INT_DCIN2_OV_RES_MASK), + REGMAP_IRQ_REG(BD70528_INT_DCIN2_OV_DET, 5, + BD70528_INT_DCIN2_OV_DET_MASK), + REGMAP_IRQ_REG(BD70528_INT_DCIN2_RMV, 5, BD70528_INT_DCIN2_RMV_MASK), + REGMAP_IRQ_REG(BD70528_INT_DCIN2_DET, 5, BD70528_INT_DCIN2_DET_MASK), + REGMAP_IRQ_REG(BD70528_INT_DCIN1_RMV, 5, BD70528_INT_DCIN1_RMV_MASK), + REGMAP_IRQ_REG(BD70528_INT_DCIN1_DET, 5, BD70528_INT_DCIN1_DET_MASK), + REGMAP_IRQ_REG(BD70528_INT_RTC_ALARM, 6, BD70528_INT_RTC_ALARM_MASK), + REGMAP_IRQ_REG(BD70528_INT_ELPS_TIM, 6, BD70528_INT_ELPS_TIM_MASK), + REGMAP_IRQ_REG(BD70528_INT_GPIO0, 7, BD70528_INT_GPIO0_MASK), + REGMAP_IRQ_REG(BD70528_INT_GPIO1, 7, BD70528_INT_GPIO1_MASK), + REGMAP_IRQ_REG(BD70528_INT_GPIO2, 7, BD70528_INT_GPIO2_MASK), + REGMAP_IRQ_REG(BD70528_INT_GPIO3, 7, BD70528_INT_GPIO3_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK1_DVS_OPFAIL, 8, + BD70528_INT_BUCK1_DVS_OPFAIL_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK2_DVS_OPFAIL, 8, + BD70528_INT_BUCK2_DVS_OPFAIL_MASK), + REGMAP_IRQ_REG(BD70528_INT_BUCK3_DVS_OPFAIL, 8, + BD70528_INT_BUCK3_DVS_OPFAIL_MASK), + REGMAP_IRQ_REG(BD70528_INT_LED1_VOLT_OPFAIL, 8, + BD70528_INT_LED1_VOLT_OPFAIL_MASK), + REGMAP_IRQ_REG(BD70528_INT_LED2_VOLT_OPFAIL, 8, + BD70528_INT_LED2_VOLT_OPFAIL_MASK), +}; + +static struct regmap_irq_chip bd70528_irq_chip = { + .name = "bd70528_irq", + .main_status = BD70528_REG_INT_MAIN, + .irqs = &bd70528_irqs[0], + .num_irqs = ARRAY_SIZE(bd70528_irqs), + .status_base = BD70528_REG_INT_SHDN, + .mask_base = BD70528_REG_INT_SHDN_MASK, + .ack_base = BD70528_REG_INT_SHDN, + .type_base = BD70528_REG_GPIO1_IN, + .init_ack_masked = true, + .num_regs = 9, + .num_main_regs = 1, + .num_type_reg = 4, + .sub_reg_offsets = &bd70528_sub_irq_offsets[0], + .num_main_status_bits = 8, + .irq_reg_stride = 1, +}; + +static int bd70528_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct bd70528_data *bd70528; + struct regmap_irq_chip_data *irq_data; + int ret, i; + + if (!i2c->irq) { + dev_err(&i2c->dev, "No IRQ configured\n"); + return -EINVAL; + } + + bd70528 = devm_kzalloc(&i2c->dev, sizeof(*bd70528), GFP_KERNEL); + if (!bd70528) + return -ENOMEM; + + mutex_init(&bd70528->rtc_timer_lock); + + dev_set_drvdata(&i2c->dev, &bd70528->chip); + + bd70528->chip.chip_type = ROHM_CHIP_TYPE_BD70528; + bd70528->chip.regmap = devm_regmap_init_i2c(i2c, &bd70528_regmap); + if (IS_ERR(bd70528->chip.regmap)) { + dev_err(&i2c->dev, "Failed to initialize Regmap\n"); + return PTR_ERR(bd70528->chip.regmap); + } + + /* + * Disallow type setting for all IRQs by default as most of them do not + * support setting type. + */ + for (i = 0; i < ARRAY_SIZE(bd70528_irqs); i++) + bd70528_irqs[i].type.types_supported = 0; + + /* Set IRQ typesetting information for GPIO pins 0 - 3 */ + for (i = 0; i < BD70528_NUM_OF_GPIOS; i++) { + struct regmap_irq_type *type; + + type = &bd70528_irqs[BD70528_INT_GPIO0 + i].type; + type->type_reg_offset = 2 * i; + type->type_rising_val = 0x20; + type->type_falling_val = 0x10; + type->type_level_high_val = 0x40; + type->type_level_low_val = 0x50; + type->types_supported = (IRQ_TYPE_EDGE_BOTH | + IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW); + } + + ret = devm_regmap_add_irq_chip(&i2c->dev, bd70528->chip.regmap, + i2c->irq, IRQF_ONESHOT, 0, + &bd70528_irq_chip, &irq_data); + if (ret) { + dev_err(&i2c->dev, "Failed to add IRQ chip\n"); + return ret; + } + dev_dbg(&i2c->dev, "Registered %d IRQs for chip\n", + bd70528_irq_chip.num_irqs); + + /* + * BD70528 IRQ controller is not touching the main mask register. + * So enable the GPIO block interrupts at main level. We can just leave + * them enabled as the IRQ controller should disable IRQs from + * sub-registers when IRQ is disabled or freed. + */ + ret = regmap_update_bits(bd70528->chip.regmap, + BD70528_REG_INT_MAIN_MASK, + BD70528_INT_GPIO_MASK, 0); + + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, + bd70528_mfd_cells, + ARRAY_SIZE(bd70528_mfd_cells), NULL, 0, + regmap_irq_get_domain(irq_data)); + if (ret) + dev_err(&i2c->dev, "Failed to create subdevices\n"); + + return ret; +} + +static const struct of_device_id bd70528_of_match[] = { + { .compatible = "rohm,bd70528", }, + { }, +}; +MODULE_DEVICE_TABLE(of, bd70528_of_match); + +static struct i2c_driver bd70528_drv = { + .driver = { + .name = "rohm-bd70528", + .of_match_table = bd70528_of_match, + }, + .probe = &bd70528_i2c_probe, +}; + +module_i2c_driver(bd70528_drv); + +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("ROHM BD70528 Power Management IC driver"); +MODULE_LICENSE("GPL"); |