diff options
author | Xiaojian Du <Xiaojian.Du@amd.com> | 2020-12-18 14:32:02 +0800 |
---|---|---|
committer | Alex Deucher <alexander.deucher@amd.com> | 2021-01-05 11:30:12 -0500 |
commit | 37f5d8b777a9a55521d4af9a916e05aedc9883cc (patch) | |
tree | 18a7cb745b5069368bc9facb25295e3b99c5bb85 /drivers | |
parent | f02c733649547efe0d623b9b18d9af18ccfc73a1 (diff) | |
download | linux-stable-37f5d8b777a9a55521d4af9a916e05aedc9883cc.tar.gz linux-stable-37f5d8b777a9a55521d4af9a916e05aedc9883cc.tar.bz2 linux-stable-37f5d8b777a9a55521d4af9a916e05aedc9883cc.zip |
drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCO
This patch is to improve the fine grain tuning function for RV/RV2/PCO.
This patch adds two new commands: "restore" and "commit".
This function uses the pp_od_clk_voltage sysfs file to configure the min
and max value of gfx clock frequency manually or restore the default value.
Command guide:
echo "s level value" > pp_od_clk_voltage
"s" - set the sclk frequency
"level" - 0 or 1, "0" represents the min value, "1" represents
the max value
"value" - the target value of sclk frequency, it should be limited in the
safe range
echo "r" > pp_od_clk_voltage
"r" - reset the sclk frequency, restore the default value instantly
echo "c" > pp_od_clk_voltage
"c" - commit the min and max value of sclk frequency to the system
only after the commit command, the target values set by "s" command
will take effect.
Example:
1)change power profile from "auto" to "manual"
$ cat power_dpm_force_performance_level
auto
$ echo "manual" > power_dpm_force_performance_level
$ cat power_dpm_force_performance_level
manual
2)check the default sclk frequency
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
3)use "s" -- set command to configure the min and max sclk frequency
$ echo "s 0 600" > pp_od_clk_voltage
$ echo "s 1 1000" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 600Mhz
1: 1000Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
4)use "r" -- reset command to restore the min or max sclk frequency
$ echo "r" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c | 114 | ||||
-rw-r--r-- | drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.h | 1 |
2 files changed, 98 insertions, 17 deletions
diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c index e57e64bbacdc..0cf899566e31 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c @@ -251,7 +251,7 @@ static int smu10_set_hard_min_gfxclk_by_freq(struct pp_hwmgr *hwmgr, uint32_t cl smu10_data->gfx_actual_soft_min_freq = clock; smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_SetHardMinGfxClk, - smu10_data->gfx_actual_soft_min_freq, + clock, NULL); } return 0; @@ -948,6 +948,8 @@ static int smu10_print_clock_levels(struct pp_hwmgr *hwmgr, struct smu10_voltage_dependency_table *mclk_table = data->clock_vol_info.vdd_dep_on_fclk; uint32_t i, now, size = 0; + uint32_t min_freq, max_freq = 0; + uint32_t ret = 0; switch (type) { case PP_SCLK: @@ -983,18 +985,28 @@ static int smu10_print_clock_levels(struct pp_hwmgr *hwmgr, break; case OD_SCLK: if (hwmgr->od_enabled) { - size = sprintf(buf, "%s:\n", "OD_SCLK"); + ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMinGfxclkFrequency, &min_freq); + if (ret) + return ret; + ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxGfxclkFrequency, &max_freq); + if (ret) + return ret; + size = sprintf(buf, "%s:\n", "OD_SCLK"); size += sprintf(buf + size, "0: %10uMhz\n", - (data->gfx_actual_soft_min_freq > 0) ? data->gfx_actual_soft_min_freq : data->gfx_min_freq_limit/100); - size += sprintf(buf + size, "1: %10uMhz\n", data->gfx_max_freq_limit/100); + (data->gfx_actual_soft_min_freq > 0) ? data->gfx_actual_soft_min_freq : min_freq); + size += sprintf(buf + size, "1: %10uMhz\n", + (data->gfx_actual_soft_max_freq > 0) ? data->gfx_actual_soft_max_freq : max_freq); } break; case OD_RANGE: if (hwmgr->od_enabled) { - uint32_t min_freq, max_freq = 0; - smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMinGfxclkFrequency, &min_freq); - smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxGfxclkFrequency, &max_freq); + ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMinGfxclkFrequency, &min_freq); + if (ret) + return ret; + ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxGfxclkFrequency, &max_freq); + if (ret) + return ret; size = sprintf(buf, "%s:\n", "OD_RANGE"); size += sprintf(buf + size, "SCLK: %7uMHz %10uMHz\n", @@ -1414,23 +1426,91 @@ static int smu10_set_fine_grain_clk_vol(struct pp_hwmgr *hwmgr, enum PP_OD_DPM_TABLE_COMMAND type, long *input, uint32_t size) { + uint32_t min_freq, max_freq = 0; + struct smu10_hwmgr *smu10_data = (struct smu10_hwmgr *)(hwmgr->backend); + int ret = 0; + if (!hwmgr->od_enabled) { pr_err("Fine grain not support\n"); return -EINVAL; } - if (size != 2) { - pr_err("Input parameter number not correct\n"); - return -EINVAL; - } - if (type == PP_OD_EDIT_SCLK_VDDC_TABLE) { - if (input[0] == 0) - smu10_set_hard_min_gfxclk_by_freq(hwmgr, input[1]); - else if (input[0] == 1) - smu10_set_soft_max_gfxclk_by_freq(hwmgr, input[1]); - else + if (size != 2) { + pr_err("Input parameter number not correct\n"); + return -EINVAL; + } + + if (input[0] == 0) { + smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMinGfxclkFrequency, &min_freq); + if (input[1] < min_freq) { + pr_err("Fine grain setting minimum sclk (%ld) MHz is less than the minimum allowed (%d) MHz\n", + input[1], min_freq); + return -EINVAL; + } + smu10_data->gfx_actual_soft_min_freq = input[1]; + } else if (input[0] == 1) { + smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxGfxclkFrequency, &max_freq); + if (input[1] > max_freq) { + pr_err("Fine grain setting maximum sclk (%ld) MHz is greater than the maximum allowed (%d) MHz\n", + input[1], max_freq); + return -EINVAL; + } + smu10_data->gfx_actual_soft_max_freq = input[1]; + } else { + return -EINVAL; + } + } else if (type == PP_OD_RESTORE_DEFAULT_TABLE) { + if (size != 0) { + pr_err("Input parameter number not correct\n"); + return -EINVAL; + } + smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMinGfxclkFrequency, &min_freq); + smum_send_msg_to_smc(hwmgr, PPSMC_MSG_GetMaxGfxclkFrequency, &max_freq); + + smu10_data->gfx_actual_soft_min_freq = min_freq; + smu10_data->gfx_actual_soft_max_freq = max_freq; + + ret = smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_SetHardMinGfxClk, + min_freq, + NULL); + if (ret) + return ret; + + ret = smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_SetSoftMaxGfxClk, + max_freq, + NULL); + if (ret) + return ret; + } else if (type == PP_OD_COMMIT_DPM_TABLE) { + if (size != 0) { + pr_err("Input parameter number not correct\n"); + return -EINVAL; + } + + if (smu10_data->gfx_actual_soft_min_freq > smu10_data->gfx_actual_soft_max_freq) { + pr_err("The setting minimun sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n", + smu10_data->gfx_actual_soft_min_freq, smu10_data->gfx_actual_soft_max_freq); return -EINVAL; + } + + ret = smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_SetHardMinGfxClk, + smu10_data->gfx_actual_soft_min_freq, + NULL); + if (ret) + return ret; + + ret = smum_send_msg_to_smc_with_parameter(hwmgr, + PPSMC_MSG_SetSoftMaxGfxClk, + smu10_data->gfx_actual_soft_max_freq, + NULL); + if (ret) + return ret; + } else { + return -EINVAL; } return 0; diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.h b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.h index 6c9b5f060902..28d86d354d50 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.h +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.h @@ -283,6 +283,7 @@ struct smu10_hwmgr { uint32_t vclk_soft_min; uint32_t dclk_soft_min; uint32_t gfx_actual_soft_min_freq; + uint32_t gfx_actual_soft_max_freq; uint32_t gfx_min_freq_limit; uint32_t gfx_max_freq_limit; /* in 10Khz*/ |