serial: 8250_exar: No need to autoconfigure Exar ports

Since we have a separate driver there is no need to autoconfigure ports,
we already know what they are.

Drop autoconfiguration in 8250_port and move type detection to 8250_exar.

Cc: Aaron Sierra <asierra@xes-inc.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190731170558.52897-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 17 insertions, 36 deletions

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 8d60e5481af0..94212d9bf73f 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -36,6 +36,7 @@
 
 #define UART_EXAR_INT0		0x80
 #define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
+#define UART_EXAR_DVID		0x8d	/* Device identification */
 
 #define UART_EXAR_FCTR		0x08	/* Feature Control Register */
 #define UART_FCTR_EXAR_IRDA	0x10	/* IrDa data encode select */
@@ -133,12 +134,27 @@ static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 {
 	const struct exar8250_board *board = priv->board;
 	unsigned int bar = 0;
+	unsigned char status;
 
 	port->port.iotype = UPIO_MEM;
 	port->port.mapbase = pci_resource_start(pcidev, bar) + offset;
 	port->port.membase = priv->virt + offset;
 	port->port.regshift = board->reg_shift;
 
+	/*
+	 * XR17V35x UARTs have an extra divisor register, DLD that gets enabled
+	 * with when DLAB is set which will cause the device to incorrectly match
+	 * and assign port type to PORT_16650. The EFR for this UART is found
+	 * at offset 0x09. Instead check the Deice ID (DVID) register
+	 * for a 2, 4 or 8 port UART.
+	 */
+	status = readb(port->port.membase + UART_EXAR_DVID);
+	if (status == 0x82 || status == 0x84 || status == 0x88) {
+		port->port.type = PORT_XR17V35X;
+	} else {
+		port->port.type = PORT_XR17D15X;
+	}
+
 	return 0;
 }
 
@@ -494,8 +510,7 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 		return rc;
 
 	memset(&uart, 0, sizeof(uart));
-	uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ
-			  | UPF_EXAR_EFR;
+	uart.port.flags = UPF_SHARE_IRQ | UPF_EXAR_EFR | UPF_FIXED_TYPE | UPF_FIXED_PORT;
 	uart.port.irq = pci_irq_vector(pcidev, 0);
 	uart.port.dev = &pcidev->dev;
 
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index c1cec808571b..6729b82ed2e3 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -45,7 +45,6 @@
  */
 #define UART_EXAR_INT0		0x80
 #define UART_EXAR_SLEEP		0x8b	/* Sleep mode */
-#define UART_EXAR_DVID		0x8d	/* Device identification */
 
 /* Nuvoton NPCM timeout register */
 #define UART_NPCM_TOR          7
@@ -1012,27 +1011,6 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	up->capabilities |= UART_CAP_FIFO;
 
 	/*
-	 * XR17V35x UARTs have an extra divisor register, DLD
-	 * that gets enabled with when DLAB is set which will
-	 * cause the device to incorrectly match and assign
-	 * port type to PORT_16650.  The EFR for this UART is
-	 * found at offset 0x09. Instead check the Deice ID (DVID)
-	 * register for a 2, 4 or 8 port UART.
-	 */
-	if (up->port.flags & UPF_EXAR_EFR) {
-		status1 = serial_in(up, UART_EXAR_DVID);
-		if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) {
-			DEBUG_AUTOCONF("Exar XR17V35x ");
-			up->port.type = PORT_XR17V35X;
-			up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
-						UART_CAP_SLEEP;
-
-			return;
-		}
-
-	}
-
-	/*
 	 * Check for presence of the EFR when DLAB is set.
 	 * Only ST16C650V1 UARTs pass this test.
 	 */
@@ -1171,18 +1149,6 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	serial_out(up, UART_IER, iersave);
 
 	/*
-	 * Exar uarts have EFR in a weird location
-	 */
-	if (up->port.flags & UPF_EXAR_EFR) {
-		DEBUG_AUTOCONF("Exar XR17D15x ");
-		up->port.type = PORT_XR17D15X;
-		up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
-				    UART_CAP_SLEEP;
-
-		return;
-	}
-
-	/*
 	 * We distinguish between 16550A and U6 16550A by counting
 	 * how many bytes are in the FIFO.
 	 */