diff options
author | Manuel Lauss <manuel.lauss@googlemail.com> | 2011-11-01 20:03:30 +0100 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2011-12-07 22:02:05 +0000 |
commit | 809f36c6f4a0568178c909ff1096ca83eae33f7d (patch) | |
tree | 6b99b1ac701c0bd581811c39e85856f3bcbda22d /drivers | |
parent | fb469f084fdf1631e31d87270f5263c20a7f5cd6 (diff) | |
download | linux-stable-809f36c6f4a0568178c909ff1096ca83eae33f7d.tar.gz linux-stable-809f36c6f4a0568178c909ff1096ca83eae33f7d.tar.bz2 linux-stable-809f36c6f4a0568178c909ff1096ca83eae33f7d.zip |
MIPS: Alchemy: Au1300 SoC support
Add basic support for the Au1300 variant(s):
- New GPIO/Interrupt controller
- DBDMA ids
- USB setup
- MMC support
- enable various PSC drivers
- detection code.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2866/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 4 | ||||
-rw-r--r-- | drivers/mmc/host/au1xmmc.c | 45 | ||||
-rw-r--r-- | drivers/spi/Kconfig | 4 | ||||
-rw-r--r-- | drivers/usb/host/alchemy-common.c | 277 | ||||
-rw-r--r-- | drivers/usb/host/ohci-au1xxx.c | 13 | ||||
-rw-r--r-- | drivers/video/Kconfig | 8 |
6 files changed, 322 insertions, 29 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a3afac4be734..cbe7a2fb779f 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -299,11 +299,11 @@ config I2C_AT91 unless your system can cope with those limitations. config I2C_AU1550 - tristate "Au1550/Au1200 SMBus interface" + tristate "Au1550/Au1200/Au1300 SMBus interface" depends on MIPS_ALCHEMY help If you say yes to this option, support will be included for the - Au1550 and Au1200 SMBus interface. + Au1550/Au1200/Au1300 SMBus interface. This driver can also be built as a module. If so, the module will be called i2c-au1550. diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 5d3b9ae64523..dbd0c8a4e98a 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -153,6 +153,7 @@ static inline int has_dbdma(void) { switch (alchemy_get_cputype()) { case ALCHEMY_CPU_AU1200: + case ALCHEMY_CPU_AU1300: return 1; default: return 0; @@ -768,11 +769,15 @@ static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) config2 = au_readl(HOST_CONFIG2(host)); switch (ios->bus_width) { + case MMC_BUS_WIDTH_8: + config2 |= SD_CONFIG2_BB; + break; case MMC_BUS_WIDTH_4: + config2 &= ~SD_CONFIG2_BB; config2 |= SD_CONFIG2_WB; break; case MMC_BUS_WIDTH_1: - config2 &= ~SD_CONFIG2_WB; + config2 &= ~(SD_CONFIG2_WB | SD_CONFIG2_BB); break; } au_writel(config2, HOST_CONFIG2(host)); @@ -943,7 +948,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) struct mmc_host *mmc; struct au1xmmc_host *host; struct resource *r; - int ret; + int ret, iflag; mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); if (!mmc) { @@ -982,37 +987,43 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "no IRQ defined\n"); goto out3; } - host->irq = r->start; - /* IRQ is shared among both SD controllers */ - ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED, - DRIVER_NAME, host); - if (ret) { - dev_err(&pdev->dev, "cannot grab IRQ\n"); - goto out3; - } mmc->ops = &au1xmmc_ops; mmc->f_min = 450000; mmc->f_max = 24000000; + mmc->max_blk_size = 2048; + mmc->max_blk_count = 512; + + mmc->ocr_avail = AU1XMMC_OCR; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; + + iflag = IRQF_SHARED; /* Au1100/Au1200: one int for both ctrls */ + switch (alchemy_get_cputype()) { case ALCHEMY_CPU_AU1100: mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE; - mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; break; case ALCHEMY_CPU_AU1200: mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; - mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT; + break; + case ALCHEMY_CPU_AU1300: + iflag = 0; /* nothing is shared */ + mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE; + mmc->f_max = 52000000; + if (host->ioarea->start == AU1100_SD0_PHYS_ADDR) + mmc->caps |= MMC_CAP_8_BIT_DATA; break; } - mmc->max_blk_size = 2048; - mmc->max_blk_count = 512; - - mmc->ocr_avail = AU1XMMC_OCR; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + ret = request_irq(host->irq, au1xmmc_irq, iflag, DRIVER_NAME, host); + if (ret) { + dev_err(&pdev->dev, "cannot grab IRQ\n"); + goto out3; + } host->status = HOST_S_IDLE; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a1fd73df5416..369e092bf3d5 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -87,12 +87,12 @@ config SPI_BFIN_SPORT Enable support for a SPI bus via the Blackfin SPORT peripheral. config SPI_AU1550 - tristate "Au1550/Au12x0 SPI Controller" + tristate "Au1550/Au1200/Au1300 SPI Controller" depends on MIPS_ALCHEMY && EXPERIMENTAL select SPI_BITBANG help If you say yes to this option, support will be included for the - Au1550 SPI controller (may also work with Au1200,Au1210,Au1250). + PSC SPI controller found on Au1550, Au1200 and Au1300 series. config SPI_BITBANG tristate "Utilities for Bitbanging SPI masters" diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c index b4192c964d0d..936af8359fb2 100644 --- a/drivers/usb/host/alchemy-common.c +++ b/drivers/usb/host/alchemy-common.c @@ -52,9 +52,263 @@ USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \ USBCFG_OME) +/* Au1300 USB config registers */ +#define USB_DWC_CTRL1 0x00 +#define USB_DWC_CTRL2 0x04 +#define USB_VBUS_TIMER 0x10 +#define USB_SBUS_CTRL 0x14 +#define USB_MSR_ERR 0x18 +#define USB_DWC_CTRL3 0x1C +#define USB_DWC_CTRL4 0x20 +#define USB_OTG_STATUS 0x28 +#define USB_DWC_CTRL5 0x2C +#define USB_DWC_CTRL6 0x30 +#define USB_DWC_CTRL7 0x34 +#define USB_PHY_STATUS 0xC0 +#define USB_INT_STATUS 0xC4 +#define USB_INT_ENABLE 0xC8 + +#define USB_DWC_CTRL1_OTGD 0x04 /* set to DISable OTG */ +#define USB_DWC_CTRL1_HSTRS 0x02 /* set to ENable EHCI */ +#define USB_DWC_CTRL1_DCRS 0x01 /* set to ENable UDC */ + +#define USB_DWC_CTRL2_PHY1RS 0x04 /* set to enable PHY1 */ +#define USB_DWC_CTRL2_PHY0RS 0x02 /* set to enable PHY0 */ +#define USB_DWC_CTRL2_PHYRS 0x01 /* set to enable PHY */ + +#define USB_DWC_CTRL3_OHCI1_CKEN (1 << 19) +#define USB_DWC_CTRL3_OHCI0_CKEN (1 << 18) +#define USB_DWC_CTRL3_EHCI0_CKEN (1 << 17) +#define USB_DWC_CTRL3_OTG0_CKEN (1 << 16) + +#define USB_SBUS_CTRL_SBCA 0x04 /* coherent access */ + +#define USB_INTEN_FORCE 0x20 +#define USB_INTEN_PHY 0x10 +#define USB_INTEN_UDC 0x08 +#define USB_INTEN_EHCI 0x04 +#define USB_INTEN_OHCI1 0x02 +#define USB_INTEN_OHCI0 0x01 static DEFINE_SPINLOCK(alchemy_usb_lock); +static inline void __au1300_usb_phyctl(void __iomem *base, int enable) +{ + unsigned long r, s; + + r = __raw_readl(base + USB_DWC_CTRL2); + s = __raw_readl(base + USB_DWC_CTRL3); + + s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN | + USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN; + + if (enable) { + /* simply enable all PHYs */ + r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS; + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } else if (!s) { + /* no USB block active, do disable all PHYs */ + r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS | + USB_DWC_CTRL2_PHYRS); + __raw_writel(r, base + USB_DWC_CTRL2); + wmb(); + } +} + +static inline void __au1300_ohci_control(void __iomem *base, int enable, int id) +{ + unsigned long r; + + if (enable) { + __raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */ + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */ + r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); /* power up the PHYs */ + + r = __raw_readl(base + USB_INT_ENABLE); + r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + /* reset the OHCI start clock bit */ + __raw_writel(0, base + USB_DWC_CTRL7); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1); + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN + : USB_DWC_CTRL3_OHCI1_CKEN); + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_ehci_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_EHCI; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_HSTRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_EHCI0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_udc_control(void __iomem *base, int enable) +{ + unsigned long r; + + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + + r = __raw_readl(base + USB_INT_ENABLE); + r |= USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + } else { + r = __raw_readl(base + USB_INT_ENABLE); + r &= ~USB_INTEN_UDC; + __raw_writel(r, base + USB_INT_ENABLE); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_DCRS; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline void __au1300_otg_control(void __iomem *base, int enable) +{ + unsigned long r; + if (enable) { + r = __raw_readl(base + USB_DWC_CTRL3); + r |= USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL1); + r &= ~USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + __au1300_usb_phyctl(base, enable); + } else { + r = __raw_readl(base + USB_DWC_CTRL1); + r |= USB_DWC_CTRL1_OTGD; + __raw_writel(r, base + USB_DWC_CTRL1); + wmb(); + + r = __raw_readl(base + USB_DWC_CTRL3); + r &= ~USB_DWC_CTRL3_OTG0_CKEN; + __raw_writel(r, base + USB_DWC_CTRL3); + wmb(); + + __au1300_usb_phyctl(base, enable); + } +} + +static inline int au1300_usb_control(int block, int enable) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + int ret = 0; + + switch (block) { + case ALCHEMY_USB_OHCI0: + __au1300_ohci_control(base, enable, 0); + break; + case ALCHEMY_USB_OHCI1: + __au1300_ohci_control(base, enable, 1); + break; + case ALCHEMY_USB_EHCI0: + __au1300_ehci_control(base, enable); + break; + case ALCHEMY_USB_UDC0: + __au1300_udc_control(base, enable); + break; + case ALCHEMY_USB_OTG0: + __au1300_otg_control(base, enable); + break; + default: + ret = -ENODEV; + } + return ret; +} + +static inline void au1300_usb_init(void) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + + /* set some sane defaults. Note: we don't fiddle with DWC_CTRL4 + * here at all: Port 2 routing (EHCI or UDC) must be set either + * by boot firmware or platform init code; I can't autodetect + * a sane setting. + */ + __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */ + wmb(); + __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */ + wmb(); + __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */ + wmb(); + __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */ + wmb(); + /* set coherent access bit */ + __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL); + wmb(); +} static inline void __au1200_ohci_control(void __iomem *base, int enable) { @@ -233,6 +487,9 @@ int alchemy_usb_control(int block, int enable) case ALCHEMY_CPU_AU1200: ret = au1200_usb_control(block, enable); break; + case ALCHEMY_CPU_AU1300: + ret = au1300_usb_control(block, enable); + break; default: ret = -ENODEV; } @@ -281,6 +538,20 @@ static void au1200_usb_pm(int susp) } } +static void au1300_usb_pm(int susp) +{ + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR); + /* remember Port2 routing */ + if (susp) { + alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4); + } else { + au1300_usb_init(); + __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4); + wmb(); + } +} + static void alchemy_usb_pm(int susp) { switch (alchemy_get_cputype()) { @@ -295,6 +566,9 @@ static void alchemy_usb_pm(int susp) case ALCHEMY_CPU_AU1200: au1200_usb_pm(susp); break; + case ALCHEMY_CPU_AU1300: + au1300_usb_pm(susp); + break; } } @@ -328,6 +602,9 @@ static int __init alchemy_usb_init(void) case ALCHEMY_CPU_AU1200: au1200_usb_init(); break; + case ALCHEMY_CPU_AU1300: + au1300_usb_init(); + break; } register_syscore_ops(&alchemy_usb_pm_ops); diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 9b66df8278f3..95d1a71dccad 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -89,7 +89,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) { - int ret; + int ret, unit; struct usb_hcd *hcd; if (usb_disabled()) @@ -120,7 +120,9 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) goto err2; } - if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) { + unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; + if (alchemy_usb_control(unit, 1)) { printk(KERN_INFO "%s: controller init failed!\n", pdev->name); ret = -ENODEV; goto err3; @@ -135,7 +137,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev) return ret; } - alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); + alchemy_usb_control(unit, 0); err3: iounmap(hcd->regs); err2: @@ -148,9 +150,12 @@ err1: static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); + int unit; + unit = (hcd->rsrc_start == AU1300_USB_OHCI1_PHYS_ADDR) ? + ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; usb_remove_hcd(hcd); - alchemy_usb_control(ALCHEMY_USB_OHCI0, 0); + alchemy_usb_control(unit, 0); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d83e967e4e15..acd4ba555e3a 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1763,16 +1763,16 @@ config FB_AU1100 au1100fb:panel=<name>. config FB_AU1200 - bool "Au1200 LCD Driver" + bool "Au1200/Au1300 LCD Driver" depends on (FB = y) && MIPS_ALCHEMY select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS help - This is the framebuffer driver for the AMD Au1200 SOC. It can drive - various panels and CRTs by passing in kernel cmd line option - au1200fb:panel=<name>. + This is the framebuffer driver for the Au1200/Au1300 SOCs. + It can drive various panels and CRTs by passing in kernel cmd line + option au1200fb:panel=<name>. config FB_VT8500 bool "VT8500 LCD Driver" |