Merge tag 'arm-soc/for-5.10/drivers' of https://github.com/Broadcom/stblinux into arm/drivers

This pull request contains Broadcom SoCs drivers changes for 5.10,
please pull the following:

- Alvaro adds support for the BCM63xx (DSL) SoCs power domain controller
  and adds support for the 6318, 6328, 6362, 63268.

- Florian adds support for tuning the Bus Interface Unit on 72164 and
  72165, enables the Brahma-B53 and Cortex-A72 read-ahead cache for the
  64-bit capable ARCH_BRCMSTB platforms, and finally updates the GISB
  driver to support breakpoint notifications.

* tag 'arm-soc/for-5.10/drivers' of https://github.com/Broadcom/stblinux:
  bus: brcmstb_gisb: Add support for breakpoint interrupts
  dt-bindings: bus: Document breakpoint interrupt for gisb-arb
  soc: bcm: brcmstb: biuctrl: Change RAC data line prefetching after 4 consecutive lines
  soc: bcm: brcmstb: biuctrl: Change RAC prefetch distance from +/-1 to +/- 2
  soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72165
  soc: bcm: brcmstb: biuctrl: Tune MCP settings for 72164
  MIPS: BMIPS: dts: add BCM63268 power domain support
  MIPS: BMIPS: dts: add BCM6362 power domain support
  MIPS: BMIPS: dts: add BCM6328 power domain support
  soc: bcm: add BCM63xx power domain driver
  MIPS: BMIPS: add BCM6318 power domain definitions
  MIPS: BMIPS: add BCM63268 power domain definitions
  MIPS: BMIPS: add BCM6362 power domain definitions
  MIPS: BMIPS: add BCM6328 power domain definitions
  dt-bindings: soc: brcm: add BCM63xx power domain binding
  soc: bcm: brcmstb: biuctrl: Enable Read-ahead cache
  bus: brcmstb_gisb: Shorten prints

Link: https://lore.kernel.org/r/20200912032153.1216354-3-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>

7 files changed, 595 insertions, 13 deletions

diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index ec1004c858b8..7355fa2cb439 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,8 +30,22 @@
 #define  ARB_ERR_CAP_STATUS_WRITE	(1 << 1)
 #define  ARB_ERR_CAP_STATUS_VALID	(1 << 0)
 
+#define  ARB_BP_CAP_CLEAR		(1 << 0)
+#define  ARB_BP_CAP_STATUS_PROT_SHIFT	14
+#define  ARB_BP_CAP_STATUS_TYPE		(1 << 13)
+#define  ARB_BP_CAP_STATUS_RSP_SHIFT	10
+#define  ARB_BP_CAP_STATUS_MASK		GENMASK(1, 0)
+#define  ARB_BP_CAP_STATUS_BS_SHIFT	2
+#define  ARB_BP_CAP_STATUS_WRITE	(1 << 1)
+#define  ARB_BP_CAP_STATUS_VALID	(1 << 0)
+
 enum {
 	ARB_TIMER,
+	ARB_BP_CAP_CLR,
+	ARB_BP_CAP_HI_ADDR,
+	ARB_BP_CAP_ADDR,
+	ARB_BP_CAP_STATUS,
+	ARB_BP_CAP_MASTER,
 	ARB_ERR_CAP_CLR,
 	ARB_ERR_CAP_HI_ADDR,
 	ARB_ERR_CAP_ADDR,
@@ -41,6 +55,11 @@ enum {
 
 static const int gisb_offsets_bcm7038[] = {
 	[ARB_TIMER]		= 0x00c,
+	[ARB_BP_CAP_CLR]	= 0x014,
+	[ARB_BP_CAP_HI_ADDR]	= -1,
+	[ARB_BP_CAP_ADDR]	= 0x0b8,
+	[ARB_BP_CAP_STATUS]	= 0x0c0,
+	[ARB_BP_CAP_MASTER]	= -1,
 	[ARB_ERR_CAP_CLR]	= 0x0c4,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0c8,
@@ -50,6 +69,11 @@ static const int gisb_offsets_bcm7038[] = {
 
 static const int gisb_offsets_bcm7278[] = {
 	[ARB_TIMER]		= 0x008,
+	[ARB_BP_CAP_CLR]	= 0x01c,
+	[ARB_BP_CAP_HI_ADDR]	= -1,
+	[ARB_BP_CAP_ADDR]	= 0x220,
+	[ARB_BP_CAP_STATUS]	= 0x230,
+	[ARB_BP_CAP_MASTER]	= 0x234,
 	[ARB_ERR_CAP_CLR]	= 0x7f8,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x7e0,
@@ -59,6 +83,11 @@ static const int gisb_offsets_bcm7278[] = {
 
 static const int gisb_offsets_bcm7400[] = {
 	[ARB_TIMER]		= 0x00c,
+	[ARB_BP_CAP_CLR]	= 0x014,
+	[ARB_BP_CAP_HI_ADDR]	= -1,
+	[ARB_BP_CAP_ADDR]	= 0x0b8,
+	[ARB_BP_CAP_STATUS]	= 0x0c0,
+	[ARB_BP_CAP_MASTER]	= 0x0c4,
 	[ARB_ERR_CAP_CLR]	= 0x0c8,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0cc,
@@ -68,6 +97,11 @@ static const int gisb_offsets_bcm7400[] = {
 
 static const int gisb_offsets_bcm7435[] = {
 	[ARB_TIMER]		= 0x00c,
+	[ARB_BP_CAP_CLR]	= 0x014,
+	[ARB_BP_CAP_HI_ADDR]	= -1,
+	[ARB_BP_CAP_ADDR]	= 0x158,
+	[ARB_BP_CAP_STATUS]	= 0x160,
+	[ARB_BP_CAP_MASTER]	= 0x164,
 	[ARB_ERR_CAP_CLR]	= 0x168,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x16c,
@@ -77,6 +111,11 @@ static const int gisb_offsets_bcm7435[] = {
 
 static const int gisb_offsets_bcm7445[] = {
 	[ARB_TIMER]		= 0x008,
+	[ARB_BP_CAP_CLR]	= 0x010,
+	[ARB_BP_CAP_HI_ADDR]	= -1,
+	[ARB_BP_CAP_ADDR]	= 0x1d8,
+	[ARB_BP_CAP_STATUS]	= 0x1e0,
+	[ARB_BP_CAP_MASTER]	= 0x1e4,
 	[ARB_ERR_CAP_CLR]	= 0x7e4,
 	[ARB_ERR_CAP_HI_ADDR]	= 0x7e8,
 	[ARB_ERR_CAP_ADDR]	= 0x7ec,
@@ -125,6 +164,16 @@ static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
 	return value;
 }
 
+static u64 gisb_read_bp_address(struct brcmstb_gisb_arb_device *gdev)
+{
+	u64 value;
+
+	value = gisb_read(gdev, ARB_BP_CAP_ADDR);
+	value |= (u64)gisb_read(gdev, ARB_BP_CAP_HI_ADDR) << 32;
+
+	return value;
+}
+
 static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
 {
 	int offset = gdev->gisb_offsets[reg];
@@ -210,8 +259,8 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 		m_name = m_fmt;
 	}
 
-	pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n",
-		__func__, reason, arb_addr,
+	pr_crit("GISB: %s at 0x%llx [%c %s], core: %s\n",
+		reason, arb_addr,
 		cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
 		cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
 		m_name);
@@ -259,6 +308,41 @@ static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t brcmstb_gisb_bp_handler(int irq, void *dev_id)
+{
+	struct brcmstb_gisb_arb_device *gdev = dev_id;
+	const char *m_name;
+	u32 bp_status;
+	u64 arb_addr;
+	u32 master;
+	char m_fmt[11];
+
+	bp_status = gisb_read(gdev, ARB_BP_CAP_STATUS);
+
+	/* Invalid captured address, bail out */
+	if (!(bp_status & ARB_BP_CAP_STATUS_VALID))
+		return IRQ_HANDLED;
+
+	/* Read the address and master */
+	arb_addr = gisb_read_bp_address(gdev);
+	master = gisb_read(gdev, ARB_BP_CAP_MASTER);
+
+	m_name = brcmstb_gisb_master_to_str(gdev, master);
+	if (!m_name) {
+		snprintf(m_fmt, sizeof(m_fmt), "0x%08x", master);
+		m_name = m_fmt;
+	}
+
+	pr_crit("GISB: breakpoint at 0x%llx [%c], core: %s\n",
+		arb_addr, bp_status & ARB_BP_CAP_STATUS_WRITE ? 'W' : 'R',
+		m_name);
+
+	/* clear the GISB error */
+	gisb_write(gdev, ARB_ERR_CAP_CLEAR, ARB_ERR_CAP_CLR);
+
+	return IRQ_HANDLED;
+}
+
 /*
  * Dump out gisb errors on die or panic.
  */
@@ -317,13 +401,14 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
 	struct brcmstb_gisb_arb_device *gdev;
 	const struct of_device_id *of_id;
 	struct resource *r;
-	int err, timeout_irq, tea_irq;
+	int err, timeout_irq, tea_irq, bp_irq;
 	unsigned int num_masters, j = 0;
 	int i, first, last;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	timeout_irq = platform_get_irq(pdev, 0);
 	tea_irq = platform_get_irq(pdev, 1);
+	bp_irq = platform_get_irq(pdev, 2);
 
 	gdev = devm_kzalloc(&pdev->dev, sizeof(*gdev), GFP_KERNEL);
 	if (!gdev)
@@ -356,6 +441,15 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
 	if (err < 0)
 		return err;
 
+	/* Interrupt is optional */
+	if (bp_irq > 0) {
+		err = devm_request_irq(&pdev->dev, bp_irq,
+				       brcmstb_gisb_bp_handler, 0, pdev->name,
+				       gdev);
+		if (err < 0)
+			return err;
+	}
+
 	/* If we do not have a valid mask, assume all masters are enabled */
 	if (of_property_read_u32(dn, "brcm,gisb-arb-master-mask",
 				&gdev->valid_mask))
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
index 648e32693b7e..24f92a6e882a 100644
--- a/drivers/soc/bcm/Kconfig
+++ b/drivers/soc/bcm/Kconfig
@@ -22,6 +22,15 @@ config RASPBERRYPI_POWER
 	  This enables support for the RPi power domains which can be enabled
 	  or disabled via the RPi firmware.
 
+config SOC_BCM63XX
+	bool "Broadcom 63xx SoC drivers"
+	depends on BMIPS_GENERIC || COMPILE_TEST
+	help
+	  Enables drivers for the Broadcom 63xx series of chips.
+	  Drivers can be enabled individually within this menu.
+
+	  If unsure, say N.
+
 config SOC_BRCMSTB
 	bool "Broadcom STB SoC drivers"
 	depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST
@@ -33,6 +42,7 @@ config SOC_BRCMSTB
 
 	  If unsure, say N.
 
+source "drivers/soc/bcm/bcm63xx/Kconfig"
 source "drivers/soc/bcm/brcmstb/Kconfig"
 
 endmenu
diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile
index d92268a829a9..7bc90e0bd773 100644
--- a/drivers/soc/bcm/Makefile
+++ b/drivers/soc/bcm/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_BCM2835_POWER)	+= bcm2835-power.o
 obj-$(CONFIG_RASPBERRYPI_POWER)	+= raspberrypi-power.o
+obj-$(CONFIG_SOC_BCM63XX)	+= bcm63xx/
 obj-$(CONFIG_SOC_BRCMSTB)	+= brcmstb/
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
new file mode 100644
index 000000000000..16f648a6c70a
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+if SOC_BCM63XX
+
+config BCM63XX_POWER
+	bool "BCM63xx power domain driver"
+	depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the BCM63xx power domains controller on
+	  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
+
+endif # SOC_BCM63XX
diff --git a/drivers/soc/bcm/bcm63xx/Makefile b/drivers/soc/bcm/bcm63xx/Makefile
new file mode 100644
index 000000000000..0710d5e018cc
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_BCM63XX_POWER) += bcm63xx-power.o
diff --git a/drivers/soc/bcm/bcm63xx/bcm63xx-power.c b/drivers/soc/bcm/bcm63xx/bcm63xx-power.c
new file mode 100644
index 000000000000..515fe182dc34
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/bcm63xx-power.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BCM63xx Power Domain Controller Driver
+ *
+ * Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
+ */
+
+#include <dt-bindings/soc/bcm6318-pm.h>
+#include <dt-bindings/soc/bcm6328-pm.h>
+#include <dt-bindings/soc/bcm6362-pm.h>
+#include <dt-bindings/soc/bcm63268-pm.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct bcm63xx_power_dev {
+	struct generic_pm_domain genpd;
+	struct bcm63xx_power *power;
+	uint32_t mask;
+};
+
+struct bcm63xx_power {
+	void __iomem *base;
+	spinlock_t lock;
+	struct bcm63xx_power_dev *dev;
+	struct genpd_onecell_data genpd_data;
+	struct generic_pm_domain **genpd;
+};
+
+struct bcm63xx_power_data {
+	const char * const name;
+	uint8_t bit;
+	unsigned int flags;
+};
+
+static int bcm63xx_power_get_state(struct bcm63xx_power_dev *pmd, bool *is_on)
+{
+	struct bcm63xx_power *power = pmd->power;
+
+	if (!pmd->mask) {
+		*is_on = false;
+		return -EINVAL;
+	}
+
+	*is_on = !(__raw_readl(power->base) & pmd->mask);
+
+	return 0;
+}
+
+static int bcm63xx_power_set_state(struct bcm63xx_power_dev *pmd, bool on)
+{
+	struct bcm63xx_power *power = pmd->power;
+	unsigned long flags;
+	uint32_t val;
+
+	if (!pmd->mask)
+		return -EINVAL;
+
+	spin_lock_irqsave(&power->lock, flags);
+	val = __raw_readl(power->base);
+	if (on)
+		val &= ~pmd->mask;
+	else
+		val |= pmd->mask;
+	__raw_writel(val, power->base);
+	spin_unlock_irqrestore(&power->lock, flags);
+
+	return 0;
+}
+
+static int bcm63xx_power_on(struct generic_pm_domain *genpd)
+{
+	struct bcm63xx_power_dev *pmd = container_of(genpd,
+		struct bcm63xx_power_dev, genpd);
+
+	return bcm63xx_power_set_state(pmd, true);
+}
+
+static int bcm63xx_power_off(struct generic_pm_domain *genpd)
+{
+	struct bcm63xx_power_dev *pmd = container_of(genpd,
+		struct bcm63xx_power_dev, genpd);
+
+	return bcm63xx_power_set_state(pmd, false);
+}
+
+static int bcm63xx_power_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	const struct bcm63xx_power_data *entry, *table;
+	struct bcm63xx_power *power;
+	unsigned int ndom;
+	uint8_t max_bit = 0;
+	int ret;
+
+	power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL);
+	if (!power)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	power->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(power->base))
+		return PTR_ERR(power->base);
+
+	table = of_device_get_match_data(dev);
+	if (!table)
+		return -EINVAL;
+
+	power->genpd_data.num_domains = 0;
+	ndom = 0;
+	for (entry = table; entry->name; entry++) {
+		max_bit = max(max_bit, entry->bit);
+		ndom++;
+	}
+
+	if (!ndom)
+		return -ENODEV;
+
+	power->genpd_data.num_domains = max_bit + 1;
+
+	power->dev = devm_kcalloc(dev, power->genpd_data.num_domains,
+				  sizeof(struct bcm63xx_power_dev),
+				  GFP_KERNEL);
+	if (!power->dev)
+		return -ENOMEM;
+
+	power->genpd = devm_kcalloc(dev, power->genpd_data.num_domains,
+				    sizeof(struct generic_pm_domain *),
+				    GFP_KERNEL);
+	if (!power->genpd)
+		return -ENOMEM;
+
+	power->genpd_data.domains = power->genpd;
+
+	ndom = 0;
+	for (entry = table; entry->name; entry++) {
+		struct bcm63xx_power_dev *pmd = &power->dev[ndom];
+		bool is_on;
+
+		pmd->power = power;
+		pmd->mask = BIT(entry->bit);
+		pmd->genpd.name = entry->name;
+		pmd->genpd.flags = entry->flags;
+
+		ret = bcm63xx_power_get_state(pmd, &is_on);
+		if (ret)
+			dev_warn(dev, "unable to get current state for %s\n",
+				 pmd->genpd.name);
+
+		pmd->genpd.power_on = bcm63xx_power_on;
+		pmd->genpd.power_off = bcm63xx_power_off;
+
+		pm_genpd_init(&pmd->genpd, NULL, !is_on);
+		power->genpd[entry->bit] = &pmd->genpd;
+
+		ndom++;
+	}
+
+	spin_lock_init(&power->lock);
+
+	ret = of_genpd_add_provider_onecell(np, &power->genpd_data);
+	if (ret) {
+		dev_err(dev, "failed to register genpd driver: %d\n", ret);
+		return ret;
+	}
+
+	dev_info(dev, "registered %u power domains\n", ndom);
+
+	return 0;
+}
+
+static const struct bcm63xx_power_data bcm6318_power_domains[] = {
+	{
+		.name = "pcie",
+		.bit = BCM6318_POWER_DOMAIN_PCIE,
+	}, {
+		.name = "usb",
+		.bit = BCM6318_POWER_DOMAIN_USB,
+	}, {
+		.name = "ephy0",
+		.bit = BCM6318_POWER_DOMAIN_EPHY0,
+	}, {
+		.name = "ephy1",
+		.bit = BCM6318_POWER_DOMAIN_EPHY1,
+	}, {
+		.name = "ephy2",
+		.bit = BCM6318_POWER_DOMAIN_EPHY2,
+	}, {
+		.name = "ephy3",
+		.bit = BCM6318_POWER_DOMAIN_EPHY3,
+	}, {
+		.name = "ldo2p5",
+		.bit = BCM6318_POWER_DOMAIN_LDO2P5,
+		.flags = GENPD_FLAG_ALWAYS_ON,
+	}, {
+		.name = "ldo2p9",
+		.bit = BCM6318_POWER_DOMAIN_LDO2P9,
+		.flags = GENPD_FLAG_ALWAYS_ON,
+	}, {
+		.name = "sw1p0",
+		.bit = BCM6318_POWER_DOMAIN_SW1P0,
+		.flags = GENPD_FLAG_ALWAYS_ON,
+	}, {
+		.name = "pad",
+		.bit = BCM6318_POWER_DOMAIN_PAD,
+		.flags = GENPD_FLAG_ALWAYS_ON,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct bcm63xx_power_data bcm6328_power_domains[] = {
+	{
+		.name = "adsl2-mips",
+		.bit = BCM6328_POWER_DOMAIN_ADSL2_MIPS,
+	}, {
+		.name = "adsl2-phy",
+		.bit = BCM6328_POWER_DOMAIN_ADSL2_PHY,
+	}, {
+		.name = "adsl2-afe",
+		.bit = BCM6328_POWER_DOMAIN_ADSL2_AFE,
+	}, {
+		.name = "sar",
+		.bit = BCM6328_POWER_DOMAIN_SAR,
+	}, {
+		.name = "pcm",
+		.bit = BCM6328_POWER_DOMAIN_PCM,
+	}, {
+		.name = "usbd",
+		.bit = BCM6328_POWER_DOMAIN_USBD,
+	}, {
+		.name = "usbh",
+		.bit = BCM6328_POWER_DOMAIN_USBH,
+	}, {
+		.name = "pcie",
+		.bit = BCM6328_POWER_DOMAIN_PCIE,
+	}, {
+		.name = "robosw",
+		.bit = BCM6328_POWER_DOMAIN_ROBOSW,
+	}, {
+		.name = "ephy",
+		.bit = BCM6328_POWER_DOMAIN_EPHY,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct bcm63xx_power_data bcm6362_power_domains[] = {
+	{
+		.name = "sar",
+		.bit = BCM6362_POWER_DOMAIN_SAR,
+	}, {
+		.name = "ipsec",
+		.bit = BCM6362_POWER_DOMAIN_IPSEC,
+	}, {
+		.name = "mips",
+		.bit = BCM6362_POWER_DOMAIN_MIPS,
+		.flags = GENPD_FLAG_ALWAYS_ON,
+	}, {
+		.name = "dect",
+		.bit = BCM6362_POWER_DOMAIN_DECT,
+	}, {
+		.name = "usbh",
+		.bit = BCM6362_POWER_DOMAIN_USBH,
+	}, {
+		.name = "usbd",
+		.bit = BCM6362_POWER_DOMAIN_USBD,
+	}, {
+		.name = "robosw",
+		.bit = BCM6362_POWER_DOMAIN_ROBOSW,
+	}, {
+		.name = "pcm",
+		.bit = BCM6362_POWER_DOMAIN_PCM,
+	}, {
+		.name = "periph",
+		.bit = BCM6362_POWER_DOMAIN_PERIPH,
+		.flags = GENPD_FLAG_ALWAYS_ON,
+	}, {
+		.name = "adsl-phy",
+		.bit = BCM6362_POWER_DOMAIN_ADSL_PHY,
+	}, {
+		.name = "gmii-pads",
+		.bit = BCM6362_POWER_DOMAIN_GMII_PADS,
+	}, {
+		.name = "fap",
+		.bit = BCM6362_POWER_DOMAIN_FAP,
+	}, {
+		.name = "pcie",
+		.bit = BCM6362_POWER_DOMAIN_PCIE,
+	}, {
+		.name = "wlan-pads",
+		.bit = BCM6362_POWER_DOMAIN_WLAN_PADS,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct bcm63xx_power_data bcm63268_power_domains[] = {
+	{
+		.name = "sar",
+		.bit = BCM63268_POWER_DOMAIN_SAR,
+	}, {
+		.name = "ipsec",
+		.bit = BCM63268_POWER_DOMAIN_IPSEC,
+	}, {
+		.name = "mips",
+		.bit = BCM63268_POWER_DOMAIN_MIPS,
+		.flags = GENPD_FLAG_ALWAYS_ON,
+	}, {
+		.name = "dect",
+		.bit = BCM63268_POWER_DOMAIN_DECT,
+	}, {
+		.name = "usbh",
+		.bit = BCM63268_POWER_DOMAIN_USBH,
+	}, {
+		.name = "usbd",
+		.bit = BCM63268_POWER_DOMAIN_USBD,
+	}, {
+		.name = "robosw",
+		.bit = BCM63268_POWER_DOMAIN_ROBOSW,
+	}, {
+		.name = "pcm",
+		.bit = BCM63268_POWER_DOMAIN_PCM,
+	}, {
+		.name = "periph",
+		.bit = BCM63268_POWER_DOMAIN_PERIPH,
+		.flags = GENPD_FLAG_ALWAYS_ON,
+	}, {
+		.name = "vdsl-phy",
+		.bit = BCM63268_POWER_DOMAIN_VDSL_PHY,
+	}, {
+		.name = "vdsl-mips",
+		.bit = BCM63268_POWER_DOMAIN_VDSL_MIPS,
+	}, {
+		.name = "fap",
+		.bit = BCM63268_POWER_DOMAIN_FAP,
+	}, {
+		.name = "pcie",
+		.bit = BCM63268_POWER_DOMAIN_PCIE,
+	}, {
+		.name = "wlan-pads",
+		.bit = BCM63268_POWER_DOMAIN_WLAN_PADS,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct of_device_id bcm63xx_power_of_match[] = {
+	{
+		.compatible = "brcm,bcm6318-power-controller",
+		.data = &bcm6318_power_domains,
+	}, {
+		.compatible = "brcm,bcm6328-power-controller",
+		.data = &bcm6328_power_domains,
+	}, {
+		.compatible = "brcm,bcm6362-power-controller",
+		.data = &bcm6362_power_domains,
+	}, {
+		.compatible = "brcm,bcm63268-power-controller",
+		.data = &bcm63268_power_domains,
+	}, {
+		/* sentinel */
+	}
+};
+
+static struct platform_driver bcm63xx_power_driver = {
+	.driver = {
+		.name = "bcm63xx-power-controller",
+		.of_match_table = bcm63xx_power_of_match,
+	},
+	.probe  = bcm63xx_power_probe,
+};
+builtin_platform_driver(bcm63xx_power_driver);
diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c
index 61731e01f94b..7f8dc302ae6e 100644
--- a/drivers/soc/bcm/brcmstb/biuctrl.c
+++ b/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -13,6 +13,22 @@
 #include <linux/syscore_ops.h>
 #include <linux/soc/brcmstb/brcmstb.h>
 
+#define RACENPREF_MASK			0x3
+#define RACPREFINST_SHIFT		0
+#define RACENINST_SHIFT			2
+#define RACPREFDATA_SHIFT		4
+#define RACENDATA_SHIFT			6
+#define RAC_CPU_SHIFT			8
+#define RACCFG_MASK			0xff
+#define DPREF_LINE_2_SHIFT		24
+#define DPREF_LINE_2_MASK		0xff
+
+/* Bitmask to enable instruction and data prefetching with a 256-bytes stride */
+#define RAC_DATA_INST_EN_MASK		(1 << RACPREFINST_SHIFT | \
+					 RACENPREF_MASK << RACENINST_SHIFT | \
+					 1 << RACPREFDATA_SHIFT | \
+					 RACENPREF_MASK << RACENDATA_SHIFT)
+
 #define  CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK	0x70000000
 #define CPU_CREDIT_REG_MCPx_READ_CRED_MASK	0xf
 #define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK	0xf
@@ -31,11 +47,21 @@ static void __iomem *cpubiuctrl_base;
 static bool mcp_wr_pairing_en;
 static const int *cpubiuctrl_regs;
 
+enum cpubiuctrl_regs {
+	CPU_CREDIT_REG = 0,
+	CPU_MCP_FLOW_REG,
+	CPU_WRITEBACK_CTRL_REG,
+	RAC_CONFIG0_REG,
+	RAC_CONFIG1_REG,
+	NUM_CPU_BIUCTRL_REGS,
+};
+
 static inline u32 cbc_readl(int reg)
 {
 	int offset = cpubiuctrl_regs[reg];
 
-	if (offset == -1)
+	if (offset == -1 ||
+	    (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
 		return (u32)-1;
 
 	return readl_relaxed(cpubiuctrl_base + offset);
@@ -45,22 +71,19 @@ static inline void cbc_writel(u32 val, int reg)
 {
 	int offset = cpubiuctrl_regs[reg];
 
-	if (offset == -1)
+	if (offset == -1 ||
+	    (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
 		return;
 
 	writel(val, cpubiuctrl_base + offset);
 }
 
-enum cpubiuctrl_regs {
-	CPU_CREDIT_REG = 0,
-	CPU_MCP_FLOW_REG,
-	CPU_WRITEBACK_CTRL_REG
-};
-
 static const int b15_cpubiuctrl_regs[] = {
 	[CPU_CREDIT_REG] = 0x184,
 	[CPU_MCP_FLOW_REG] = -1,
 	[CPU_WRITEBACK_CTRL_REG] = -1,
+	[RAC_CONFIG0_REG] = -1,
+	[RAC_CONFIG1_REG] = -1,
 };
 
 /* Odd cases, e.g: 7260A0 */
@@ -68,22 +91,26 @@ static const int b53_cpubiuctrl_no_wb_regs[] = {
 	[CPU_CREDIT_REG] = 0x0b0,
 	[CPU_MCP_FLOW_REG] = 0x0b4,
 	[CPU_WRITEBACK_CTRL_REG] = -1,
+	[RAC_CONFIG0_REG] = 0x78,
+	[RAC_CONFIG1_REG] = 0x7c,
 };
 
 static const int b53_cpubiuctrl_regs[] = {
 	[CPU_CREDIT_REG] = 0x0b0,
 	[CPU_MCP_FLOW_REG] = 0x0b4,
 	[CPU_WRITEBACK_CTRL_REG] = 0x22c,
+	[RAC_CONFIG0_REG] = 0x78,
+	[RAC_CONFIG1_REG] = 0x7c,
 };
 
 static const int a72_cpubiuctrl_regs[] = {
 	[CPU_CREDIT_REG] = 0x18,
 	[CPU_MCP_FLOW_REG] = 0x1c,
 	[CPU_WRITEBACK_CTRL_REG] = 0x20,
+	[RAC_CONFIG0_REG] = 0x08,
+	[RAC_CONFIG1_REG] = 0x0c,
 };
 
-#define NUM_CPU_BIUCTRL_REGS	3
-
 static int __init mcp_write_pairing_set(void)
 {
 	u32 creds = 0;
@@ -110,6 +137,8 @@ static int __init mcp_write_pairing_set(void)
 static const u32 a72_b53_mach_compat[] = {
 	0x7211,
 	0x7216,
+	0x72164,
+	0x72165,
 	0x7255,
 	0x7260,
 	0x7268,
@@ -117,6 +146,61 @@ static const u32 a72_b53_mach_compat[] = {
 	0x7278,
 };
 
+/* The read-ahead cache present in the Brahma-B53 CPU is a special piece of
+ * hardware after the integrated L2 cache of the B53 CPU complex whose purpose
+ * is to prefetch instruction and/or data with a line size of either 64 bytes
+ * or 256 bytes. The rationale is that the data-bus of the CPU interface is
+ * optimized for 256-byte transactions, and enabling the read-ahead cache
+ * provides a significant performance boost (typically twice the performance
+ * for a memcpy benchmark application).
+ *
+ * The read-ahead cache is transparent for Virtual Address cache maintenance
+ * operations: IC IVAU, DC IVAC, DC CVAC, DC CVAU and DC CIVAC.  So no special
+ * handling is needed for the DMA API above and beyond what is included in the
+ * arm64 implementation.
+ *
+ * In addition, since the Point of Unification is typically between L1 and L2
+ * for the Brahma-B53 processor no special read-ahead cache handling is needed
+ * for the IC IALLU and IC IALLUIS cache maintenance operations.
+ *
+ * However, it is not possible to specify the cache level (L3) for the cache
+ * maintenance instructions operating by set/way to operate on the read-ahead
+ * cache.  The read-ahead cache will maintain coherency when inner cache lines
+ * are cleaned by set/way, but if it is necessary to invalidate inner cache
+ * lines by set/way to maintain coherency with system masters operating on
+ * shared memory that does not have hardware support for coherency, then it
+ * will also be necessary to explicitly invalidate the read-ahead cache.
+ */
+static void __init a72_b53_rac_enable_all(struct device_node *np)
+{
+	unsigned int cpu;
+	u32 enable = 0, pref_dist, shift;
+
+	if (IS_ENABLED(CONFIG_CACHE_B15_RAC))
+		return;
+
+	if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n"))
+		return;
+
+	pref_dist = cbc_readl(RAC_CONFIG1_REG);
+	for_each_possible_cpu(cpu) {
+		shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT;
+		enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT);
+		if (cpubiuctrl_regs == a72_cpubiuctrl_regs) {
+			enable &= ~(RACENPREF_MASK << shift);
+			enable |= 3 << shift;
+			pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT);
+		}
+	}
+
+	cbc_writel(enable, RAC_CONFIG0_REG);
+	cbc_writel(pref_dist, RAC_CONFIG1_REG);
+
+	pr_info("%pOF: Broadcom %s read-ahead cache\n",
+		np, cpubiuctrl_regs == a72_cpubiuctrl_regs ?
+		"Cortex-A72" : "Brahma-B53");
+}
+
 static void __init mcp_a72_b53_set(void)
 {
 	unsigned int i;
@@ -262,6 +346,7 @@ static int __init brcmstb_biuctrl_init(void)
 		return ret;
 	}
 
+	a72_b53_rac_enable_all(np);
 	mcp_a72_b53_set();
 #ifdef CONFIG_PM_SLEEP
 	register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);