diff options
author | Arnd Bergmann <arnd@arndb.de> | 2018-03-09 17:21:55 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2018-03-26 15:57:07 +0200 |
commit | e58af24ccd8d235c7aaa0ef0fc63a18c5d2cb88e (patch) | |
tree | 84221a9f4f56ad5ee5dcf122a859dc6db56cccd7 /drivers | |
parent | 47838669de9d9e1411fab9323f2ac1457d1944d2 (diff) | |
download | linux-stable-e58af24ccd8d235c7aaa0ef0fc63a18c5d2cb88e.tar.gz linux-stable-e58af24ccd8d235c7aaa0ef0fc63a18c5d2cb88e.tar.bz2 linux-stable-e58af24ccd8d235c7aaa0ef0fc63a18c5d2cb88e.zip |
i2c: remove bfin-twi driver
The blackfin architecture is getting removed, so the
twi driver can also be removed.
Acked-by: Aaron Wu <aaron.wu@analog.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 18 | ||||
-rw-r--r-- | drivers/i2c/busses/Makefile | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-bfin-twi.c | 737 |
3 files changed, 0 insertions, 756 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 68ceac7617ff..4c0895165727 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -445,24 +445,6 @@ config I2C_BRCMSTB If you do not need I2C interface, say N. -config I2C_BLACKFIN_TWI - tristate "Blackfin TWI I2C support" - depends on BLACKFIN - depends on !BF561 && !BF531 && !BF532 && !BF533 - help - This is the I2C bus driver for Blackfin on-chip TWI interface. - - This driver can also be built as a module. If so, the module - will be called i2c-bfin-twi. - -config I2C_BLACKFIN_TWI_CLK_KHZ - int "Blackfin TWI I2C clock (kHz)" - depends on I2C_BLACKFIN_TWI - range 21 400 - default 50 - help - The unit of the TWI clock is kHz. - config I2C_CADENCE tristate "Cadence I2C Controller" depends on ARCH_ZYNQ || ARM64 || XTENSA diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 2ce8576540a2..9e475a54e36e 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o -obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c deleted file mode 100644 index ff3343186a82..000000000000 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ /dev/null @@ -1,737 +0,0 @@ -/* - * Blackfin On-Chip Two Wire Interface Driver - * - * Copyright 2005-2007 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/mm.h> -#include <linux/timer.h> -#include <linux/spinlock.h> -#include <linux/completion.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/delay.h> - -#include <asm/irq.h> -#include <asm/portmux.h> -#include <asm/bfin_twi.h> - -/* SMBus mode*/ -#define TWI_I2C_MODE_STANDARD 1 -#define TWI_I2C_MODE_STANDARDSUB 2 -#define TWI_I2C_MODE_COMBINED 3 -#define TWI_I2C_MODE_REPEAT 4 - -static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, - unsigned short twi_int_status) -{ - unsigned short mast_stat = read_MASTER_STAT(iface); - - if (twi_int_status & XMTSERV) { - if (iface->writeNum <= 0) { - /* start receive immediately after complete sending in - * combine mode. - */ - if (iface->cur_mode == TWI_I2C_MODE_COMBINED) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | MDIR); - else if (iface->manual_stop) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | STOP); - else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && - iface->cur_msg + 1 < iface->msg_num) { - if (iface->pmsg[iface->cur_msg + 1].flags & - I2C_M_RD) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | - MDIR); - else - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) & - ~MDIR); - } - } - /* Transmit next data */ - while (iface->writeNum > 0 && - (read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) { - write_XMT_DATA8(iface, *(iface->transPtr++)); - iface->writeNum--; - } - } - if (twi_int_status & RCVSERV) { - while (iface->readNum > 0 && - (read_FIFO_STAT(iface) & RCVSTAT)) { - /* Receive next data */ - *(iface->transPtr) = read_RCV_DATA8(iface); - if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { - /* Change combine mode into sub mode after - * read first data. - */ - iface->cur_mode = TWI_I2C_MODE_STANDARDSUB; - /* Get read number from first byte in block - * combine mode. - */ - if (iface->readNum == 1 && iface->manual_stop) - iface->readNum = *iface->transPtr + 1; - } - iface->transPtr++; - iface->readNum--; - } - - if (iface->readNum == 0) { - if (iface->manual_stop) { - /* Temporary workaround to avoid possible bus stall - - * Flush FIFO before issuing the STOP condition - */ - read_RCV_DATA16(iface); - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | STOP); - } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && - iface->cur_msg + 1 < iface->msg_num) { - if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | MDIR); - else - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) & ~MDIR); - } - } - } - if (twi_int_status & MERR) { - write_INT_MASK(iface, 0); - write_MASTER_STAT(iface, 0x3e); - write_MASTER_CTL(iface, 0); - iface->result = -EIO; - - if (mast_stat & LOSTARB) - dev_dbg(&iface->adap.dev, "Lost Arbitration\n"); - if (mast_stat & ANAK) - dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n"); - if (mast_stat & DNAK) - dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n"); - if (mast_stat & BUFRDERR) - dev_dbg(&iface->adap.dev, "Buffer Read Error\n"); - if (mast_stat & BUFWRERR) - dev_dbg(&iface->adap.dev, "Buffer Write Error\n"); - - /* Faulty slave devices, may drive SDA low after a transfer - * finishes. To release the bus this code generates up to 9 - * extra clocks until SDA is released. - */ - - if (read_MASTER_STAT(iface) & SDASEN) { - int cnt = 9; - do { - write_MASTER_CTL(iface, SCLOVR); - udelay(6); - write_MASTER_CTL(iface, 0); - udelay(6); - } while ((read_MASTER_STAT(iface) & SDASEN) && cnt--); - - write_MASTER_CTL(iface, SDAOVR | SCLOVR); - udelay(6); - write_MASTER_CTL(iface, SDAOVR); - udelay(6); - write_MASTER_CTL(iface, 0); - } - - /* If it is a quick transfer, only address without data, - * not an err, return 1. - */ - if (iface->cur_mode == TWI_I2C_MODE_STANDARD && - iface->transPtr == NULL && - (twi_int_status & MCOMP) && (mast_stat & DNAK)) - iface->result = 1; - - complete(&iface->complete); - return; - } - if (twi_int_status & MCOMP) { - if (twi_int_status & (XMTSERV | RCVSERV) && - (read_MASTER_CTL(iface) & MEN) == 0 && - (iface->cur_mode == TWI_I2C_MODE_REPEAT || - iface->cur_mode == TWI_I2C_MODE_COMBINED)) { - iface->result = -1; - write_INT_MASK(iface, 0); - write_MASTER_CTL(iface, 0); - } else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { - if (iface->readNum == 0) { - /* set the read number to 1 and ask for manual - * stop in block combine mode - */ - iface->readNum = 1; - iface->manual_stop = 1; - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) | (0xff << 6)); - } else { - /* set the readd number in other - * combine mode. - */ - write_MASTER_CTL(iface, - (read_MASTER_CTL(iface) & - (~(0xff << 6))) | - (iface->readNum << 6)); - } - /* remove restart bit and enable master receive */ - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) & ~RSTART); - } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT && - iface->cur_msg + 1 < iface->msg_num) { - iface->cur_msg++; - iface->transPtr = iface->pmsg[iface->cur_msg].buf; - iface->writeNum = iface->readNum = - iface->pmsg[iface->cur_msg].len; - /* Set Transmit device address */ - write_MASTER_ADDR(iface, - iface->pmsg[iface->cur_msg].addr); - if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD) - iface->read_write = I2C_SMBUS_READ; - else { - iface->read_write = I2C_SMBUS_WRITE; - /* Transmit first data */ - if (iface->writeNum > 0) { - write_XMT_DATA8(iface, - *(iface->transPtr++)); - iface->writeNum--; - } - } - - if (iface->pmsg[iface->cur_msg].len <= 255) { - write_MASTER_CTL(iface, - (read_MASTER_CTL(iface) & - (~(0xff << 6))) | - (iface->pmsg[iface->cur_msg].len << 6)); - iface->manual_stop = 0; - } else { - write_MASTER_CTL(iface, - (read_MASTER_CTL(iface) | - (0xff << 6))); - iface->manual_stop = 1; - } - /* remove restart bit before last message */ - if (iface->cur_msg + 1 == iface->msg_num) - write_MASTER_CTL(iface, - read_MASTER_CTL(iface) & ~RSTART); - } else { - iface->result = 1; - write_INT_MASK(iface, 0); - write_MASTER_CTL(iface, 0); - } - complete(&iface->complete); - } -} - -/* Interrupt handler */ -static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id) -{ - struct bfin_twi_iface *iface = dev_id; - unsigned long flags; - unsigned short twi_int_status; - - spin_lock_irqsave(&iface->lock, flags); - while (1) { - twi_int_status = read_INT_STAT(iface); - if (!twi_int_status) - break; - /* Clear interrupt status */ - write_INT_STAT(iface, twi_int_status); - bfin_twi_handle_interrupt(iface, twi_int_status); - } - spin_unlock_irqrestore(&iface->lock, flags); - return IRQ_HANDLED; -} - -/* - * One i2c master transfer - */ -static int bfin_twi_do_master_xfer(struct i2c_adapter *adap, - struct i2c_msg *msgs, int num) -{ - struct bfin_twi_iface *iface = adap->algo_data; - struct i2c_msg *pmsg; - int rc = 0; - - if (!(read_CONTROL(iface) & TWI_ENA)) - return -ENXIO; - - if (read_MASTER_STAT(iface) & BUSBUSY) - return -EAGAIN; - - iface->pmsg = msgs; - iface->msg_num = num; - iface->cur_msg = 0; - - pmsg = &msgs[0]; - if (pmsg->flags & I2C_M_TEN) { - dev_err(&adap->dev, "10 bits addr not supported!\n"); - return -EINVAL; - } - - if (iface->msg_num > 1) - iface->cur_mode = TWI_I2C_MODE_REPEAT; - iface->manual_stop = 0; - iface->transPtr = pmsg->buf; - iface->writeNum = iface->readNum = pmsg->len; - iface->result = 0; - init_completion(&(iface->complete)); - /* Set Transmit device address */ - write_MASTER_ADDR(iface, pmsg->addr); - - /* FIFO Initiation. Data in FIFO should be - * discarded before start a new operation. - */ - write_FIFO_CTL(iface, 0x3); - write_FIFO_CTL(iface, 0); - - if (pmsg->flags & I2C_M_RD) - iface->read_write = I2C_SMBUS_READ; - else { - iface->read_write = I2C_SMBUS_WRITE; - /* Transmit first data */ - if (iface->writeNum > 0) { - write_XMT_DATA8(iface, *(iface->transPtr++)); - iface->writeNum--; - } - } - - /* clear int stat */ - write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV); - - /* Interrupt mask . Enable XMT, RCV interrupt */ - write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV); - - if (pmsg->len <= 255) - write_MASTER_CTL(iface, pmsg->len << 6); - else { - write_MASTER_CTL(iface, 0xff << 6); - iface->manual_stop = 1; - } - - /* Master enable */ - write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | - (iface->msg_num > 1 ? RSTART : 0) | - ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) | - ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0)); - - while (!iface->result) { - if (!wait_for_completion_timeout(&iface->complete, - adap->timeout)) { - iface->result = -1; - dev_err(&adap->dev, "master transfer timeout\n"); - } - } - - if (iface->result == 1) - rc = iface->cur_msg + 1; - else - rc = iface->result; - - return rc; -} - -/* - * Generic i2c master transfer entrypoint - */ -static int bfin_twi_master_xfer(struct i2c_adapter *adap, - struct i2c_msg *msgs, int num) -{ - return bfin_twi_do_master_xfer(adap, msgs, num); -} - -/* - * One I2C SMBus transfer - */ -int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, - u8 command, int size, union i2c_smbus_data *data) -{ - struct bfin_twi_iface *iface = adap->algo_data; - int rc = 0; - - if (!(read_CONTROL(iface) & TWI_ENA)) - return -ENXIO; - - if (read_MASTER_STAT(iface) & BUSBUSY) - return -EAGAIN; - - iface->writeNum = 0; - iface->readNum = 0; - - /* Prepare datas & select mode */ - switch (size) { - case I2C_SMBUS_QUICK: - iface->transPtr = NULL; - iface->cur_mode = TWI_I2C_MODE_STANDARD; - break; - case I2C_SMBUS_BYTE: - if (data == NULL) - iface->transPtr = NULL; - else { - if (read_write == I2C_SMBUS_READ) - iface->readNum = 1; - else - iface->writeNum = 1; - iface->transPtr = &data->byte; - } - iface->cur_mode = TWI_I2C_MODE_STANDARD; - break; - case I2C_SMBUS_BYTE_DATA: - if (read_write == I2C_SMBUS_READ) { - iface->readNum = 1; - iface->cur_mode = TWI_I2C_MODE_COMBINED; - } else { - iface->writeNum = 1; - iface->cur_mode = TWI_I2C_MODE_STANDARDSUB; - } - iface->transPtr = &data->byte; - break; - case I2C_SMBUS_WORD_DATA: - if (read_write == I2C_SMBUS_READ) { - iface->readNum = 2; - iface->cur_mode = TWI_I2C_MODE_COMBINED; - } else { - iface->writeNum = 2; - iface->cur_mode = TWI_I2C_MODE_STANDARDSUB; - } - iface->transPtr = (u8 *)&data->word; - break; - case I2C_SMBUS_PROC_CALL: - iface->writeNum = 2; - iface->readNum = 2; - iface->cur_mode = TWI_I2C_MODE_COMBINED; - iface->transPtr = (u8 *)&data->word; - break; - case I2C_SMBUS_BLOCK_DATA: - if (read_write == I2C_SMBUS_READ) { - iface->readNum = 0; - iface->cur_mode = TWI_I2C_MODE_COMBINED; - } else { - iface->writeNum = data->block[0] + 1; - iface->cur_mode = TWI_I2C_MODE_STANDARDSUB; - } - iface->transPtr = data->block; - break; - case I2C_SMBUS_I2C_BLOCK_DATA: - if (read_write == I2C_SMBUS_READ) { - iface->readNum = data->block[0]; - iface->cur_mode = TWI_I2C_MODE_COMBINED; - } else { - iface->writeNum = data->block[0]; - iface->cur_mode = TWI_I2C_MODE_STANDARDSUB; - } - iface->transPtr = (u8 *)&data->block[1]; - break; - default: - return -1; - } - - iface->result = 0; - iface->manual_stop = 0; - iface->read_write = read_write; - iface->command = command; - init_completion(&(iface->complete)); - - /* FIFO Initiation. Data in FIFO should be discarded before - * start a new operation. - */ - write_FIFO_CTL(iface, 0x3); - write_FIFO_CTL(iface, 0); - - /* clear int stat */ - write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV); - - /* Set Transmit device address */ - write_MASTER_ADDR(iface, addr); - - switch (iface->cur_mode) { - case TWI_I2C_MODE_STANDARDSUB: - write_XMT_DATA8(iface, iface->command); - write_INT_MASK(iface, MCOMP | MERR | - ((iface->read_write == I2C_SMBUS_READ) ? - RCVSERV : XMTSERV)); - - if (iface->writeNum + 1 <= 255) - write_MASTER_CTL(iface, (iface->writeNum + 1) << 6); - else { - write_MASTER_CTL(iface, 0xff << 6); - iface->manual_stop = 1; - } - /* Master enable */ - write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | - ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0)); - break; - case TWI_I2C_MODE_COMBINED: - write_XMT_DATA8(iface, iface->command); - write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV); - - if (iface->writeNum > 0) - write_MASTER_CTL(iface, (iface->writeNum + 1) << 6); - else - write_MASTER_CTL(iface, 0x1 << 6); - /* Master enable */ - write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART | - ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0)); - break; - default: - write_MASTER_CTL(iface, 0); - if (size != I2C_SMBUS_QUICK) { - /* Don't access xmit data register when this is a - * read operation. - */ - if (iface->read_write != I2C_SMBUS_READ) { - if (iface->writeNum > 0) { - write_XMT_DATA8(iface, - *(iface->transPtr++)); - if (iface->writeNum <= 255) - write_MASTER_CTL(iface, - iface->writeNum << 6); - else { - write_MASTER_CTL(iface, - 0xff << 6); - iface->manual_stop = 1; - } - iface->writeNum--; - } else { - write_XMT_DATA8(iface, iface->command); - write_MASTER_CTL(iface, 1 << 6); - } - } else { - if (iface->readNum > 0 && iface->readNum <= 255) - write_MASTER_CTL(iface, - iface->readNum << 6); - else if (iface->readNum > 255) { - write_MASTER_CTL(iface, 0xff << 6); - iface->manual_stop = 1; - } else - break; - } - } - write_INT_MASK(iface, MCOMP | MERR | - ((iface->read_write == I2C_SMBUS_READ) ? - RCVSERV : XMTSERV)); - - /* Master enable */ - write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | - ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) | - ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0)); - break; - } - - while (!iface->result) { - if (!wait_for_completion_timeout(&iface->complete, - adap->timeout)) { - iface->result = -1; - dev_err(&adap->dev, "smbus transfer timeout\n"); - } - } - - rc = (iface->result >= 0) ? 0 : -1; - - return rc; -} - -/* - * Generic I2C SMBus transfer entrypoint - */ -int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, - u8 command, int size, union i2c_smbus_data *data) -{ - return bfin_twi_do_smbus_xfer(adap, addr, flags, - read_write, command, size, data); -} - -/* - * Return what the adapter supports - */ -static u32 bfin_twi_functionality(struct i2c_adapter *adap) -{ - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | - I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK; -} - -static const struct i2c_algorithm bfin_twi_algorithm = { - .master_xfer = bfin_twi_master_xfer, - .smbus_xfer = bfin_twi_smbus_xfer, - .functionality = bfin_twi_functionality, -}; - -#ifdef CONFIG_PM_SLEEP -static int i2c_bfin_twi_suspend(struct device *dev) -{ - struct bfin_twi_iface *iface = dev_get_drvdata(dev); - - iface->saved_clkdiv = read_CLKDIV(iface); - iface->saved_control = read_CONTROL(iface); - - free_irq(iface->irq, iface); - - /* Disable TWI */ - write_CONTROL(iface, iface->saved_control & ~TWI_ENA); - - return 0; -} - -static int i2c_bfin_twi_resume(struct device *dev) -{ - struct bfin_twi_iface *iface = dev_get_drvdata(dev); - - int rc = request_irq(iface->irq, bfin_twi_interrupt_entry, - 0, to_platform_device(dev)->name, iface); - if (rc) { - dev_err(dev, "Can't get IRQ %d !\n", iface->irq); - return -ENODEV; - } - - /* Resume TWI interface clock as specified */ - write_CLKDIV(iface, iface->saved_clkdiv); - - /* Resume TWI */ - write_CONTROL(iface, iface->saved_control); - - return 0; -} - -static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm, - i2c_bfin_twi_suspend, i2c_bfin_twi_resume); -#define I2C_BFIN_TWI_PM_OPS (&i2c_bfin_twi_pm) -#else -#define I2C_BFIN_TWI_PM_OPS NULL -#endif - -static int i2c_bfin_twi_probe(struct platform_device *pdev) -{ - struct bfin_twi_iface *iface; - struct i2c_adapter *p_adap; - struct resource *res; - int rc; - unsigned int clkhilow; - - iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface), - GFP_KERNEL); - if (!iface) { - dev_err(&pdev->dev, "Cannot allocate memory\n"); - return -ENOMEM; - } - - spin_lock_init(&(iface->lock)); - - /* Find and map our resources */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - iface->regs_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(iface->regs_base)) { - dev_err(&pdev->dev, "Cannot map IO\n"); - return PTR_ERR(iface->regs_base); - } - - iface->irq = platform_get_irq(pdev, 0); - if (iface->irq < 0) { - dev_err(&pdev->dev, "No IRQ specified\n"); - return -ENOENT; - } - - p_adap = &iface->adap; - p_adap->nr = pdev->id; - strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name)); - p_adap->algo = &bfin_twi_algorithm; - p_adap->algo_data = iface; - p_adap->class = I2C_CLASS_DEPRECATED; - p_adap->dev.parent = &pdev->dev; - p_adap->timeout = 5 * HZ; - p_adap->retries = 3; - - rc = peripheral_request_list( - dev_get_platdata(&pdev->dev), - "i2c-bfin-twi"); - if (rc) { - dev_err(&pdev->dev, "Can't setup pin mux!\n"); - return -EBUSY; - } - - rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry, - 0, pdev->name, iface); - if (rc) { - dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq); - rc = -ENODEV; - goto out_error; - } - - /* Set TWI internal clock as 10MHz */ - write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F); - - /* - * We will not end up with a CLKDIV=0 because no one will specify - * 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250) - */ - clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2; - - /* Set Twi interface clock as specified */ - write_CLKDIV(iface, (clkhilow << 8) | clkhilow); - - /* Enable TWI */ - write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA); - - rc = i2c_add_numbered_adapter(p_adap); - if (rc < 0) - goto out_error; - - platform_set_drvdata(pdev, iface); - - dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Controller, " - "regs_base@%p\n", iface->regs_base); - - return 0; - -out_error: - peripheral_free_list(dev_get_platdata(&pdev->dev)); - return rc; -} - -static int i2c_bfin_twi_remove(struct platform_device *pdev) -{ - struct bfin_twi_iface *iface = platform_get_drvdata(pdev); - - i2c_del_adapter(&(iface->adap)); - peripheral_free_list(dev_get_platdata(&pdev->dev)); - - return 0; -} - -static struct platform_driver i2c_bfin_twi_driver = { - .probe = i2c_bfin_twi_probe, - .remove = i2c_bfin_twi_remove, - .driver = { - .name = "i2c-bfin-twi", - .pm = I2C_BFIN_TWI_PM_OPS, - }, -}; - -static int __init i2c_bfin_twi_init(void) -{ - return platform_driver_register(&i2c_bfin_twi_driver); -} - -static void __exit i2c_bfin_twi_exit(void) -{ - platform_driver_unregister(&i2c_bfin_twi_driver); -} - -subsys_initcall(i2c_bfin_twi_init); -module_exit(i2c_bfin_twi_exit); - -MODULE_AUTHOR("Bryan Wu, Sonic Zhang"); -MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Controller Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:i2c-bfin-twi"); |