diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-05 17:34:57 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-05 17:34:57 -0700 |
commit | e87d51ac61f88ae44fe14b34abe08566032d726b (patch) | |
tree | fc418d2e29fbf8a06f1ed0b6eaff8ba03e0543d7 /drivers | |
parent | bdc713bf5674bc6a881bd05c85e2a0f811b409b3 (diff) | |
parent | 3622d3e77ecef090b5111e3c5423313f11711dfa (diff) | |
download | linux-stable-e87d51ac61f88ae44fe14b34abe08566032d726b.tar.gz linux-stable-e87d51ac61f88ae44fe14b34abe08566032d726b.tar.bz2 linux-stable-e87d51ac61f88ae44fe14b34abe08566032d726b.zip |
Merge tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Media updates for v4.12-rc1:
- new driver to support mediatek jpeg in hardware codec
- rc-lirc, s5p-cec and st-cec staging drivers got promoted
- hardware histogram support for vsp1 driver
- added Virtual Media Controller driver, to make easier to test the
media controller
- added a new CEC driver (rainshadow-cec)
- removed two staging LIRC drivers for obscure hardware that are too
obsolete
- added support for Intel SR300 Depth camera
- some improvements at CEC and RC core
- lots of driver cleanups, improvements all over the tree
With this series, we're finally getting rid of the LIRC staging
driver. There's just one left (lirc_zilog), with require more care,
as part of its functionality (IR RX) is already provided by another
driver. Work in progress to convert it on the proper way"
* tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits)
[media] ov2640: print error if devm_*_optional*() fails
[media] atmel-isc: Fix the static checker warning
[media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8
[media] ov2640: fix vflip control
[media] ov2640: fix duplicate width+height returning from ov2640_select_win()
[media] ov2640: add missing write to size change preamble
[media] ov2640: add information about DSP register 0xc7
[media] ov2640: improve banding filter register definitions/documentation
[media] ov2640: fix init sequence alignment
[media] ov2640: make GPIOLIB an optional dependency
[media] xc5000: fix spelling mistake: "calibration"
[media] vidioc-queryctrl.rst: fix menu/int menu references
[media] media-entity: only call dev_dbg_obj if mdev is not NULL
[media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-'
[media] mtk-vcodec: avoid warnings because of empty macros
[media] coda: bump maximum number of internal framebuffers to 17
[media] media: mtk-vcodec: remove informative log
[media] subdev-formats.rst: remove spurious '-'
[media] dw2102: limit messages to buffer size
[media] ttusb2: limit messages to buffer size
...
Diffstat (limited to 'drivers')
280 files changed, 13392 insertions, 4784 deletions
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 52438404c8c9..1ff6ab6371e8 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -43,6 +43,8 @@ #include <drm/exynos_drm.h> +#include <media/cec-notifier.h> + #include "exynos_drm_crtc.h" #define HOTPLUG_DEBOUNCE_MS 1100 @@ -118,6 +120,7 @@ struct hdmi_context { bool dvi_mode; struct delayed_work hotplug_work; struct drm_display_mode current_mode; + struct cec_notifier *notifier; const struct hdmi_driver_data *drv_data; void __iomem *regs; @@ -821,6 +824,7 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector, if (gpiod_get_value(hdata->hpd_gpio)) return connector_status_connected; + cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID); return connector_status_disconnected; } @@ -859,6 +863,7 @@ static int hdmi_get_modes(struct drm_connector *connector) edid->width_cm, edid->height_cm); drm_mode_connector_update_edid_property(connector, edid); + cec_notifier_set_phys_addr_from_edid(hdata->notifier, edid); ret = drm_add_edid_modes(connector, edid); @@ -1501,6 +1506,7 @@ static void hdmi_disable(struct drm_encoder *encoder) if (funcs && funcs->disable) (*funcs->disable)(crtc); + cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID); cancel_delayed_work(&hdata->hotplug_work); hdmiphy_disable(hdata); @@ -1880,15 +1886,22 @@ static int hdmi_probe(struct platform_device *pdev) } } + hdata->notifier = cec_notifier_get(&pdev->dev); + if (hdata->notifier == NULL) { + ret = -ENOMEM; + goto err_hdmiphy; + } + pm_runtime_enable(dev); ret = component_add(&pdev->dev, &hdmi_component_ops); if (ret) - goto err_disable_pm_runtime; + goto err_notifier_put; return ret; -err_disable_pm_runtime: +err_notifier_put: + cec_notifier_put(hdata->notifier); pm_runtime_disable(dev); err_hdmiphy: @@ -1907,9 +1920,11 @@ static int hdmi_remove(struct platform_device *pdev) struct hdmi_context *hdata = platform_get_drvdata(pdev); cancel_delayed_work_sync(&hdata->hotplug_work); + cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID); component_del(&pdev->dev, &hdmi_component_ops); + cec_notifier_put(hdata->notifier); pm_runtime_disable(&pdev->dev); if (!IS_ERR(hdata->reg_hdmi_en)) diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c index ce2dcba679d5..243905b6ae59 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.c +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -771,6 +771,8 @@ static void sti_hdmi_disable(struct drm_bridge *bridge) clk_disable_unprepare(hdmi->clk_pix); hdmi->enabled = false; + + cec_notifier_set_phys_addr(hdmi->notifier, CEC_PHYS_ADDR_INVALID); } /** @@ -973,6 +975,7 @@ static int sti_hdmi_connector_get_modes(struct drm_connector *connector) DRM_DEBUG_KMS("%s : %dx%d cm\n", (hdmi->hdmi_monitor ? "hdmi monitor" : "dvi monitor"), edid->width_cm, edid->height_cm); + cec_notifier_set_phys_addr_from_edid(hdmi->notifier, edid); count = drm_add_edid_modes(connector, edid); drm_mode_connector_update_edid_property(connector, edid); @@ -1035,6 +1038,7 @@ sti_hdmi_connector_detect(struct drm_connector *connector, bool force) } DRM_DEBUG_DRIVER("hdmi cable disconnected\n"); + cec_notifier_set_phys_addr(hdmi->notifier, CEC_PHYS_ADDR_INVALID); return connector_status_disconnected; } @@ -1423,6 +1427,10 @@ static int sti_hdmi_probe(struct platform_device *pdev) goto release_adapter; } + hdmi->notifier = cec_notifier_get(&pdev->dev); + if (!hdmi->notifier) + goto release_adapter; + hdmi->reset = devm_reset_control_get(dev, "hdmi"); /* Take hdmi out of reset */ if (!IS_ERR(hdmi->reset)) @@ -1442,11 +1450,14 @@ static int sti_hdmi_remove(struct platform_device *pdev) { struct sti_hdmi *hdmi = dev_get_drvdata(&pdev->dev); + cec_notifier_set_phys_addr(hdmi->notifier, CEC_PHYS_ADDR_INVALID); + i2c_put_adapter(hdmi->ddc_adapt); if (hdmi->audio_pdev) platform_device_unregister(hdmi->audio_pdev); component_del(&pdev->dev, &sti_hdmi_ops); + cec_notifier_put(hdmi->notifier); return 0; } diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h index 407012350f1a..c6469b56ce7e 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.h +++ b/drivers/gpu/drm/sti/sti_hdmi.h @@ -11,6 +11,7 @@ #include <linux/platform_device.h> #include <drm/drmP.h> +#include <media/cec-notifier.h> #define HDMI_STA 0x0010 #define HDMI_STA_DLL_LCK BIT(5) @@ -64,6 +65,7 @@ static const struct drm_prop_enum_list colorspace_mode_names[] = { * @audio_pdev: ASoC hdmi-codec platform device * @audio: hdmi audio parameters. * @drm_connector: hdmi connector + * @notifier: hotplug detect notifier */ struct sti_hdmi { struct device dev; @@ -89,6 +91,7 @@ struct sti_hdmi { struct platform_device *audio_pdev; struct hdmi_audio_params audio; struct drm_connector *drm_connector; + struct cec_notifier *notifier; }; u32 hdmi_read(struct sti_hdmi *hdmi, int offset); diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 3512316e7a46..b72edd27f880 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -81,23 +81,15 @@ config MEDIA_RC_SUPPORT Say Y when you have a TV or an IR device. config MEDIA_CEC_SUPPORT - bool "HDMI CEC support" - select MEDIA_CEC_EDID - ---help--- - Enable support for HDMI CEC (Consumer Electronics Control), - which is an optional HDMI feature. - - Say Y when you have an HDMI receiver, transmitter or a USB CEC - adapter that supports HDMI CEC. + bool "HDMI CEC support" + ---help--- + Enable support for HDMI CEC (Consumer Electronics Control), + which is an optional HDMI feature. -config MEDIA_CEC_DEBUG - bool "HDMI CEC debugfs interface" - depends on MEDIA_CEC_SUPPORT && DEBUG_FS - ---help--- - Turns on the DebugFS interface for CEC devices. + Say Y when you have an HDMI receiver, transmitter or a USB CEC + adapter that supports HDMI CEC. -config MEDIA_CEC_EDID - bool +source "drivers/media/cec/Kconfig" # # Media controller diff --git a/drivers/media/Makefile b/drivers/media/Makefile index d87ccb8eeabe..523fea3648ad 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -2,16 +2,10 @@ # Makefile for the kernel multimedia device drivers. # -ifeq ($(CONFIG_MEDIA_CEC_EDID),y) - obj-$(CONFIG_MEDIA_SUPPORT) += cec-edid.o -endif - -ifeq ($(CONFIG_MEDIA_CEC_SUPPORT),y) - obj-$(CONFIG_MEDIA_SUPPORT) += cec/ -endif - media-objs := media-device.o media-devnode.o media-entity.o +obj-$(CONFIG_CEC_CORE) += cec/ + # # I2C drivers should come before other drivers, otherwise they'll fail # when compiled as builtin drivers diff --git a/drivers/media/cec/Kconfig b/drivers/media/cec/Kconfig new file mode 100644 index 000000000000..f944d93e3167 --- /dev/null +++ b/drivers/media/cec/Kconfig @@ -0,0 +1,19 @@ +config CEC_CORE + tristate + depends on MEDIA_CEC_SUPPORT + default y + +config MEDIA_CEC_NOTIFIER + bool + +config MEDIA_CEC_RC + bool "HDMI CEC RC integration" + depends on CEC_CORE && RC_CORE + ---help--- + Pass on CEC remote control messages to the RC framework. + +config MEDIA_CEC_DEBUG + bool "HDMI CEC debugfs interface" + depends on CEC_CORE && DEBUG_FS + ---help--- + Turns on the DebugFS interface for CEC devices. diff --git a/drivers/media/cec/Makefile b/drivers/media/cec/Makefile index d6686337275f..402a6c62a3e8 100644 --- a/drivers/media/cec/Makefile +++ b/drivers/media/cec/Makefile @@ -1,5 +1,7 @@ -cec-objs := cec-core.o cec-adap.o cec-api.o +cec-objs := cec-core.o cec-adap.o cec-api.o cec-edid.o -ifeq ($(CONFIG_MEDIA_CEC_SUPPORT),y) - obj-$(CONFIG_MEDIA_SUPPORT) += cec.o +ifeq ($(CONFIG_MEDIA_CEC_NOTIFIER),y) + cec-objs += cec-notifier.o endif + +obj-$(CONFIG_CEC_CORE) += cec.o diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index ccda41c2c9e4..f5fe01c9da8a 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -300,6 +300,40 @@ static void cec_data_cancel(struct cec_data *data) } /* + * Flush all pending transmits and cancel any pending timeout work. + * + * This function is called with adap->lock held. + */ +static void cec_flush(struct cec_adapter *adap) +{ + struct cec_data *data, *n; + + /* + * If the adapter is disabled, or we're asked to stop, + * then cancel any pending transmits. + */ + while (!list_empty(&adap->transmit_queue)) { + data = list_first_entry(&adap->transmit_queue, + struct cec_data, list); + cec_data_cancel(data); + } + if (adap->transmitting) + cec_data_cancel(adap->transmitting); + + /* Cancel the pending timeout work. */ + list_for_each_entry_safe(data, n, &adap->wait_queue, list) { + if (cancel_delayed_work(&data->work)) + cec_data_cancel(data); + /* + * If cancel_delayed_work returned false, then + * the cec_wait_timeout function is running, + * which will call cec_data_completed. So no + * need to do anything special in that case. + */ + } +} + +/* * Main CEC state machine * * Wait until the thread should be stopped, or we are not transmitting and @@ -333,7 +367,6 @@ int cec_thread_func(void *_adap) */ err = wait_event_interruptible_timeout(adap->kthread_waitq, kthread_should_stop() || - (!adap->is_configured && !adap->is_configuring) || (!adap->transmitting && !list_empty(&adap->transmit_queue)), msecs_to_jiffies(CEC_XFER_TIMEOUT_MS)); @@ -348,39 +381,8 @@ int cec_thread_func(void *_adap) mutex_lock(&adap->lock); - if ((!adap->is_configured && !adap->is_configuring) || - kthread_should_stop()) { - /* - * If the adapter is disabled, or we're asked to stop, - * then cancel any pending transmits. - */ - while (!list_empty(&adap->transmit_queue)) { - data = list_first_entry(&adap->transmit_queue, - struct cec_data, list); - cec_data_cancel(data); - } - if (adap->transmitting) - cec_data_cancel(adap->transmitting); - - /* - * Cancel the pending timeout work. We have to unlock - * the mutex when flushing the work since - * cec_wait_timeout() will take it. This is OK since - * no new entries can be added to wait_queue as long - * as adap->transmitting is NULL, which it is due to - * the cec_data_cancel() above. - */ - while (!list_empty(&adap->wait_queue)) { - data = list_first_entry(&adap->wait_queue, - struct cec_data, list); - - if (!cancel_delayed_work(&data->work)) { - mutex_unlock(&adap->lock); - flush_scheduled_work(); - mutex_lock(&adap->lock); - } - cec_data_cancel(data); - } + if (kthread_should_stop()) { + cec_flush(adap); goto unlock; } @@ -410,6 +412,7 @@ int cec_thread_func(void *_adap) struct cec_data, list); list_del_init(&data->list); adap->transmit_queue_sz--; + /* Make this the current transmitting message */ adap->transmitting = data; @@ -603,17 +606,17 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, /* Sanity checks */ if (msg->len == 0 || msg->len > CEC_MAX_MSG_SIZE) { - dprintk(1, "cec_transmit_msg: invalid length %d\n", msg->len); + dprintk(1, "%s: invalid length %d\n", __func__, msg->len); return -EINVAL; } if (msg->timeout && msg->len == 1) { - dprintk(1, "cec_transmit_msg: can't reply for poll msg\n"); + dprintk(1, "%s: can't reply for poll msg\n", __func__); return -EINVAL; } memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len); if (msg->len == 1) { if (cec_msg_destination(msg) == 0xf) { - dprintk(1, "cec_transmit_msg: invalid poll message\n"); + dprintk(1, "%s: invalid poll message\n", __func__); return -EINVAL; } if (cec_has_log_addr(adap, cec_msg_destination(msg))) { @@ -634,20 +637,30 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, } if (msg->len > 1 && !cec_msg_is_broadcast(msg) && cec_has_log_addr(adap, cec_msg_destination(msg))) { - dprintk(1, "cec_transmit_msg: destination is the adapter itself\n"); + dprintk(1, "%s: destination is the adapter itself\n", __func__); return -EINVAL; } if (msg->len > 1 && adap->is_configured && !cec_has_log_addr(adap, cec_msg_initiator(msg))) { - dprintk(1, "cec_transmit_msg: initiator has unknown logical address %d\n", - cec_msg_initiator(msg)); + dprintk(1, "%s: initiator has unknown logical address %d\n", + __func__, cec_msg_initiator(msg)); return -EINVAL; } - if (!adap->is_configured && !adap->is_configuring) - return -ENONET; + if (!adap->is_configured && !adap->is_configuring) { + if (msg->msg[0] != 0xf0) { + dprintk(1, "%s: adapter is unconfigured\n", __func__); + return -ENONET; + } + if (msg->reply) { + dprintk(1, "%s: invalid msg->reply\n", __func__); + return -EINVAL; + } + } - if (adap->transmit_queue_sz >= CEC_MAX_MSG_TX_QUEUE_SZ) + if (adap->transmit_queue_sz >= CEC_MAX_MSG_TX_QUEUE_SZ) { + dprintk(1, "%s: transmit queue full\n", __func__); return -EBUSY; + } data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) @@ -659,11 +672,11 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, } if (msg->timeout) - dprintk(2, "cec_transmit_msg: %*ph (wait for 0x%02x%s)\n", - msg->len, msg->msg, msg->reply, !block ? ", nb" : ""); + dprintk(2, "%s: %*ph (wait for 0x%02x%s)\n", + __func__, msg->len, msg->msg, msg->reply, !block ? ", nb" : ""); else - dprintk(2, "cec_transmit_msg: %*ph%s\n", - msg->len, msg->msg, !block ? " (nb)" : ""); + dprintk(2, "%s: %*ph%s\n", + __func__, msg->len, msg->msg, !block ? " (nb)" : ""); data->msg = *msg; data->fh = fh; @@ -692,6 +705,7 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, if (fh) list_add_tail(&data->xfer_list, &fh->xfer_list); + list_add_tail(&data->list, &adap->transmit_queue); adap->transmit_queue_sz++; if (!adap->transmitting) @@ -1117,6 +1131,7 @@ static void cec_adap_unconfigure(struct cec_adapter *adap) adap->is_configuring = false; adap->is_configured = false; memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs)); + cec_flush(adap); wake_up_interruptible(&adap->kthread_waitq); cec_post_state_event(adap); } @@ -1348,19 +1363,30 @@ void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block) /* Disabling monitor all mode should always succeed */ if (adap->monitor_all_cnt) WARN_ON(call_op(adap, adap_monitor_all_enable, false)); - WARN_ON(adap->ops->adap_enable(adap, false)); + mutex_lock(&adap->devnode.lock); + if (list_empty(&adap->devnode.fhs)) + WARN_ON(adap->ops->adap_enable(adap, false)); + mutex_unlock(&adap->devnode.lock); if (phys_addr == CEC_PHYS_ADDR_INVALID) return; } - if (adap->ops->adap_enable(adap, true)) + mutex_lock(&adap->devnode.lock); + if (list_empty(&adap->devnode.fhs) && + adap->ops->adap_enable(adap, true)) { + mutex_unlock(&adap->devnode.lock); return; + } if (adap->monitor_all_cnt && call_op(adap, adap_monitor_all_enable, true)) { - WARN_ON(adap->ops->adap_enable(adap, false)); + if (list_empty(&adap->devnode.fhs)) + WARN_ON(adap->ops->adap_enable(adap, false)); + mutex_unlock(&adap->devnode.lock); return; } + mutex_unlock(&adap->devnode.lock); + adap->phys_addr = phys_addr; cec_post_state_event(adap); if (adap->log_addrs.num_log_addrs) @@ -1435,12 +1461,16 @@ int __cec_s_log_addrs(struct cec_adapter *adap, * within the correct range. */ if (log_addrs->vendor_id != CEC_VENDOR_ID_NONE && - (log_addrs->vendor_id & 0xff000000) != 0) + (log_addrs->vendor_id & 0xff000000) != 0) { + dprintk(1, "invalid vendor ID\n"); return -EINVAL; + } if (log_addrs->cec_version != CEC_OP_CEC_VERSION_1_4 && - log_addrs->cec_version != CEC_OP_CEC_VERSION_2_0) + log_addrs->cec_version != CEC_OP_CEC_VERSION_2_0) { + dprintk(1, "invalid CEC version\n"); return -EINVAL; + } if (log_addrs->num_log_addrs > 1) for (i = 0; i < log_addrs->num_log_addrs; i++) @@ -1585,6 +1615,9 @@ static int cec_feature_abort_reason(struct cec_adapter *adap, */ if (msg->msg[1] == CEC_MSG_FEATURE_ABORT) return 0; + /* Don't Feature Abort messages from 'Unregistered' */ + if (cec_msg_initiator(msg) == CEC_LOG_ADDR_UNREGISTERED) + return 0; cec_msg_set_reply_to(&tx_msg, msg); cec_msg_feature_abort(&tx_msg, msg->msg[1], reason); return cec_transmit_msg(adap, &tx_msg, false); @@ -1699,7 +1732,7 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU)) break; -#if IS_REACHABLE(CONFIG_RC_CORE) +#ifdef CONFIG_MEDIA_CEC_RC switch (msg->msg[2]) { /* * Play function, this message can have variable length @@ -1736,7 +1769,7 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, if (!(adap->capabilities & CEC_CAP_RC) || !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU)) break; -#if IS_REACHABLE(CONFIG_RC_CORE) +#ifdef CONFIG_MEDIA_CEC_RC rc_keyup(adap->rc); #endif break; diff --git a/drivers/media/cec/cec-api.c b/drivers/media/cec/cec-api.c index 8950b6c9d6a9..0860fb458757 100644 --- a/drivers/media/cec/cec-api.c +++ b/drivers/media/cec/cec-api.c @@ -198,7 +198,11 @@ static long cec_transmit(struct cec_adapter *adap, struct cec_fh *fh, return -EINVAL; mutex_lock(&adap->lock); - if (!adap->is_configured) + if (adap->log_addrs.num_log_addrs == 0) + err = -EPERM; + else if (adap->is_configuring) + err = -ENONET; + else if (!adap->is_configured && msg.msg[0] != 0xf0) err = -ENONET; else if (cec_is_busy(adap, fh)) err = -EBUSY; @@ -515,9 +519,18 @@ static int cec_open(struct inode *inode, struct file *filp) return err; } + mutex_lock(&devnode->lock); + if (list_empty(&devnode->fhs) && + adap->phys_addr == CEC_PHYS_ADDR_INVALID) { + err = adap->ops->adap_enable(adap, true); + if (err) { + mutex_unlock(&devnode->lock); + kfree(fh); + return err; + } + } filp->private_data = fh; - mutex_lock(&devnode->lock); /* Queue up initial state events */ ev_state.state_change.phys_addr = adap->phys_addr; ev_state.state_change.log_addr_mask = adap->log_addrs.log_addr_mask; @@ -551,6 +564,10 @@ static int cec_release(struct inode *inode, struct file *filp) mutex_lock(&devnode->lock); list_del(&fh->list); + if (list_empty(&devnode->fhs) && + adap->phys_addr == CEC_PHYS_ADDR_INVALID) { + WARN_ON(adap->ops->adap_enable(adap, false)); + } mutex_unlock(&devnode->lock); /* Unhook pending transmits from this filehandle. */ diff --git a/drivers/media/cec/cec-core.c b/drivers/media/cec/cec-core.c index 3163e038a364..f9ebff90f8eb 100644 --- a/drivers/media/cec/cec-core.c +++ b/drivers/media/cec/cec-core.c @@ -187,6 +187,24 @@ static void cec_devnode_unregister(struct cec_devnode *devnode) put_device(&devnode->dev); } +#ifdef CONFIG_MEDIA_CEC_NOTIFIER +static void cec_cec_notify(struct cec_adapter *adap, u16 pa) +{ + cec_s_phys_addr(adap, pa, false); +} + +void cec_register_cec_notifier(struct cec_adapter *adap, + struct cec_notifier *notifier) +{ + if (WARN_ON(!adap->devnode.registered)) + return; + + adap->notifier = notifier; + cec_notifier_register(adap->notifier, adap, cec_cec_notify); +} +EXPORT_SYMBOL_GPL(cec_register_cec_notifier); +#endif + struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv, const char *name, u32 caps, u8 available_las) @@ -194,6 +212,10 @@ struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, struct cec_adapter *adap; int res; +#ifndef CONFIG_MEDIA_CEC_RC + caps &= ~CEC_CAP_RC; +#endif + if (WARN_ON(!caps)) return ERR_PTR(-EINVAL); if (WARN_ON(!ops)) @@ -226,10 +248,10 @@ struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, return ERR_PTR(res); } +#ifdef CONFIG_MEDIA_CEC_RC if (!(caps & CEC_CAP_RC)) return adap; -#if IS_REACHABLE(CONFIG_RC_CORE) /* Prepare the RC input device */ adap->rc = rc_allocate_device(RC_DRIVER_SCANCODE); if (!adap->rc) { @@ -256,8 +278,6 @@ struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, adap->rc->priv = adap; adap->rc->map_name = RC_MAP_CEC; adap->rc->timeout = MS_TO_NS(100); -#else - adap->capabilities &= ~CEC_CAP_RC; #endif return adap; } @@ -277,9 +297,9 @@ int cec_register_adapter(struct cec_adapter *adap, adap->owner = parent->driver->owner; adap->devnode.dev.parent = parent; -#if IS_REACHABLE(CONFIG_RC_CORE) - adap->rc->dev.parent = parent; +#ifdef CONFIG_MEDIA_CEC_RC if (adap->capabilities & CEC_CAP_RC) { + adap->rc->dev.parent = parent; res = rc_register_device(adap->rc); if (res) { @@ -294,7 +314,7 @@ int cec_register_adapter(struct cec_adapter *adap, res = cec_devnode_register(&adap->devnode, adap->owner); if (res) { -#if IS_REACHABLE(CONFIG_RC_CORE) +#ifdef CONFIG_MEDIA_CEC_RC /* Note: rc_unregister also calls rc_free */ rc_unregister_device(adap->rc); adap->rc = NULL; @@ -329,12 +349,16 @@ void cec_unregister_adapter(struct cec_adapter *adap) if (IS_ERR_OR_NULL(adap)) return; -#if IS_REACHABLE(CONFIG_RC_CORE) +#ifdef CONFIG_MEDIA_CEC_RC /* Note: rc_unregister also calls rc_free */ rc_unregister_device(adap->rc); adap->rc = NULL; #endif debugfs_remove_recursive(adap->cec_dir); +#ifdef CONFIG_MEDIA_CEC_NOTIFIER + if (adap->notifier) + cec_notifier_unregister(adap->notifier); +#endif cec_devnode_unregister(&adap->devnode); } EXPORT_SYMBOL_GPL(cec_unregister_adapter); @@ -349,7 +373,7 @@ void cec_delete_adapter(struct cec_adapter *adap) kthread_stop(adap->kthread); if (adap->kthread_config) kthread_stop(adap->kthread_config); -#if IS_REACHABLE(CONFIG_RC_CORE) +#ifdef CONFIG_MEDIA_CEC_RC rc_free_device(adap->rc); #endif kfree(adap); diff --git a/drivers/media/cec-edid.c b/drivers/media/cec/cec-edid.c index 5719b991e340..38e3fec6152b 100644 --- a/drivers/media/cec-edid.c +++ b/drivers/media/cec/cec-edid.c @@ -20,7 +20,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> -#include <media/cec-edid.h> +#include <media/cec.h> /* * This EDID is expected to be a CEA-861 compliant, which means that there are @@ -165,7 +165,3 @@ int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port) return 0; } EXPORT_SYMBOL_GPL(cec_phys_addr_validate); - -MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>"); -MODULE_DESCRIPTION("CEC EDID helper functions"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/cec/cec-notifier.c b/drivers/media/cec/cec-notifier.c new file mode 100644 index 000000000000..74dc1c32080e --- /dev/null +++ b/drivers/media/cec/cec-notifier.c @@ -0,0 +1,130 @@ +/* + * cec-notifier.c - notify CEC drivers of physical address changes + * + * Copyright 2016 Russell King <rmk+kernel@arm.linux.org.uk> + * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/export.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/kref.h> + +#include <media/cec.h> +#include <media/cec-notifier.h> +#include <drm/drm_edid.h> + +struct cec_notifier { + struct mutex lock; + struct list_head head; + struct kref kref; + struct device *dev; + struct cec_adapter *cec_adap; + void (*callback)(struct cec_adapter *adap, u16 pa); + + u16 phys_addr; +}; + +static LIST_HEAD(cec_notifiers); +static DEFINE_MUTEX(cec_notifiers_lock); + +struct cec_notifier *cec_notifier_get(struct device *dev) +{ + struct cec_notifier *n; + + mutex_lock(&cec_notifiers_lock); + list_for_each_entry(n, &cec_notifiers, head) { + if (n->dev == dev) { + kref_get(&n->kref); + mutex_unlock(&cec_notifiers_lock); + return n; + } + } + n = kzalloc(sizeof(*n), GFP_KERNEL); + if (!n) + goto unlock; + n->dev = dev; + n->phys_addr = CEC_PHYS_ADDR_INVALID; + mutex_init(&n->lock); + kref_init(&n->kref); + list_add_tail(&n->head, &cec_notifiers); +unlock: + mutex_unlock(&cec_notifiers_lock); + return n; +} +EXPORT_SYMBOL_GPL(cec_notifier_get); + +static void cec_notifier_release(struct kref *kref) +{ + struct cec_notifier *n = + container_of(kref, struct cec_notifier, kref); + + list_del(&n->head); + kfree(n); +} + +void cec_notifier_put(struct cec_notifier *n) +{ + mutex_lock(&cec_notifiers_lock); + kref_put(&n->kref, cec_notifier_release); + mutex_unlock(&cec_notifiers_lock); +} +EXPORT_SYMBOL_GPL(cec_notifier_put); + +void cec_notifier_set_phys_addr(struct cec_notifier *n, u16 pa) +{ + mutex_lock(&n->lock); + n->phys_addr = pa; + if (n->callback) + n->callback(n->cec_adap, n->phys_addr); + mutex_unlock(&n->lock); +} +EXPORT_SYMBOL_GPL(cec_notifier_set_phys_addr); + +void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n, + const struct edid *edid) +{ + u16 pa = CEC_PHYS_ADDR_INVALID; + + if (edid && edid->extensions) + pa = cec_get_edid_phys_addr((const u8 *)edid, + EDID_LENGTH * (edid->extensions + 1), NULL); + cec_notifier_set_phys_addr(n, pa); +} +EXPORT_SYMBOL_GPL(cec_notifier_set_phys_addr_from_edid); + +void cec_notifier_register(struct cec_notifier *n, + struct cec_adapter *adap, + void (*callback)(struct cec_adapter *adap, u16 pa)) +{ + kref_get(&n->kref); + mutex_lock(&n->lock); + n->cec_adap = adap; + n->callback = callback; + n->callback(adap, n->phys_addr); + mutex_unlock(&n->lock); +} +EXPORT_SYMBOL_GPL(cec_notifier_register); + +void cec_notifier_unregister(struct cec_notifier *n) +{ + mutex_lock(&n->lock); + n->callback = NULL; + mutex_unlock(&n->lock); + cec_notifier_put(n); +} +EXPORT_SYMBOL_GPL(cec_notifier_unregister); diff --git a/drivers/media/common/b2c2/flexcop-fe-tuner.c b/drivers/media/common/b2c2/flexcop-fe-tuner.c index 5f10151ecec9..7636606f0be5 100644 --- a/drivers/media/common/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/common/b2c2/flexcop-fe-tuner.c @@ -473,7 +473,7 @@ static int airstar_atsc1_attach(struct flexcop_device *fc, /* AirStar ATSC 2nd generation */ #if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL) -static struct nxt200x_config samsung_tbmv_config = { +static const struct nxt200x_config samsung_tbmv_config = { .demod_address = 0x0a, }; diff --git a/drivers/media/common/saa7146/saa7146_vbi.c b/drivers/media/common/saa7146/saa7146_vbi.c index 49237518d65f..3553ac4cba5c 100644 --- a/drivers/media/common/saa7146/saa7146_vbi.c +++ b/drivers/media/common/saa7146/saa7146_vbi.c @@ -365,9 +365,8 @@ static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv) INIT_LIST_HEAD(&vv->vbi_dmaq.queue); - init_timer(&vv->vbi_dmaq.timeout); - vv->vbi_dmaq.timeout.function = saa7146_buffer_timeout; - vv->vbi_dmaq.timeout.data = (unsigned long)(&vv->vbi_dmaq); + setup_timer(&vv->vbi_dmaq.timeout, saa7146_buffer_timeout, + (unsigned long)(&vv->vbi_dmaq)); vv->vbi_dmaq.dev = dev; init_waitqueue_head(&vv->vbi_wq); diff --git a/drivers/media/common/saa7146/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c index e034bcfcf757..b3b29d4f36ed 100644 --- a/drivers/media/common/saa7146/saa7146_video.c +++ b/drivers/media/common/saa7146/saa7146_video.c @@ -1201,9 +1201,8 @@ static void video_init(struct saa7146_dev *dev, struct saa7146_vv *vv) { INIT_LIST_HEAD(&vv->video_dmaq.queue); - init_timer(&vv->video_dmaq.timeout); - vv->video_dmaq.timeout.function = saa7146_buffer_timeout; - vv->video_dmaq.timeout.data = (unsigned long)(&vv->video_dmaq); + setup_timer(&vv->video_dmaq.timeout, saa7146_buffer_timeout, + (unsigned long)(&vv->video_dmaq)); vv->video_dmaq.dev = dev; /* set some default values */ diff --git a/drivers/media/common/tveeprom.c b/drivers/media/common/tveeprom.c index 6e1020227f9f..ccf2d3b12aec 100644 --- a/drivers/media/common/tveeprom.c +++ b/drivers/media/common/tveeprom.c @@ -420,8 +420,8 @@ static int hasRadioTuner(int tunerType) return 0; } -void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, - unsigned char *eeprom_data) +void tveeprom_hauppauge_analog(struct tveeprom *tvee, + unsigned char *eeprom_data) { /* ---------------------------------------------- ** The hauppauge eeprom format is tagged diff --git a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c index e47b46e2d26c..3dd22da7e17d 100644 --- a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c +++ b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c @@ -927,7 +927,14 @@ static void precalculate_color(struct tpg_data *tpg, int k) y >>= 4; cb >>= 4; cr >>= 4; - if (tpg->real_quantization == V4L2_QUANTIZATION_LIM_RANGE) { + /* + * XV601/709 use the header/footer margins to encode R', G' + * and B' values outside the range [0-1]. So do not clamp + * XV601/709 values. + */ + if (tpg->real_quantization == V4L2_QUANTIZATION_LIM_RANGE && + tpg->real_ycbcr_enc != V4L2_YCBCR_ENC_XV601 && + tpg->real_ycbcr_enc != V4L2_YCBCR_ENC_XV709) { y = clamp(y, 16, 235); cb = clamp(cb, 16, 240); cr = clamp(cr, 16, 240); diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c index 8d65028c7a74..d38bf9bce480 100644 --- a/drivers/media/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb-core/dvb_ca_en50221.c @@ -785,6 +785,29 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * b goto exit; } + /* + * It may need some time for the CAM to settle down, or there might + * be a race condition between the CAM, writing HC and our last + * check for DA. This happens, if the CAM asserts DA, just after + * checking DA before we are setting HC. In this case it might be + * a bug in the CAM to keep the FR bit, the lower layer/HW + * communication requires a longer timeout or the CAM needs more + * time internally. But this happens in reality! + * We need to read the status from the HW again and do the same + * we did for the previous check for DA + */ + status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); + if (status < 0) + goto exit; + + if (status & (STATUSREG_DA | STATUSREG_RE)) { + if (status & STATUSREG_DA) + dvb_ca_en50221_thread_wakeup(ca); + + status = -EAGAIN; + goto exit; + } + /* send the amount of data */ if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0) goto exit; diff --git a/drivers/media/dvb-core/dvb_frontend.h b/drivers/media/dvb-core/dvb_frontend.h index 482912d3b77a..907a05bde162 100644 --- a/drivers/media/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb-core/dvb_frontend.h @@ -643,6 +643,8 @@ struct dtv_frontend_properties { /** * struct dvb_frontend - Frontend structure to be used on drivers. * + * @refcount: refcount to keep track of struct dvb_frontend + * references * @ops: embedded struct dvb_frontend_ops * @dvb: pointer to struct dvb_adapter * @demodulator_priv: demod private data diff --git a/drivers/media/dvb-frontends/cxd2841er.c b/drivers/media/dvb-frontends/cxd2841er.c index 614bfb3740f1..ce37dc2e89c7 100644 --- a/drivers/media/dvb-frontends/cxd2841er.c +++ b/drivers/media/dvb-frontends/cxd2841er.c @@ -3852,7 +3852,9 @@ static struct dvb_frontend_ops cxd2841er_t_c_ops = { FE_CAN_MUTE_TS | FE_CAN_2G_MODULATION, .frequency_min = 42000000, - .frequency_max = 1002000000 + .frequency_max = 1002000000, + .symbol_rate_min = 870000, + .symbol_rate_max = 11700000 }, .init = cxd2841er_init_tc, .sleep = cxd2841er_sleep_tc, diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c index 7e1bbbaad625..b5ea9192a341 100644 --- a/drivers/media/dvb-frontends/drxk_hard.c +++ b/drivers/media/dvb-frontends/drxk_hard.c @@ -1904,7 +1904,9 @@ static int get_lock_status(struct drxk_state *state, u32 *p_lock_status) status = get_dvbt_lock_status(state, p_lock_status); break; default: - break; + pr_debug("Unsupported operation mode %d in %s\n", + state->m_operation_mode, __func__); + return 0; } error: if (status < 0) diff --git a/drivers/media/dvb-frontends/mn88472.c b/drivers/media/dvb-frontends/mn88472.c index 29dd13b36c28..f6938f9607ac 100644 --- a/drivers/media/dvb-frontends/mn88472.c +++ b/drivers/media/dvb-frontends/mn88472.c @@ -28,8 +28,9 @@ static int mn88472_read_status(struct dvb_frontend *fe, enum fe_status *status) struct i2c_client *client = fe->demodulator_priv; struct mn88472_dev *dev = i2c_get_clientdata(client); struct dtv_frontend_properties *c = &fe->dtv_property_cache; - int ret; - unsigned int utmp; + int ret, i, stmp; + unsigned int utmp, utmp1, utmp2; + u8 buf[5]; if (!dev->active) { ret = -EAGAIN; @@ -77,6 +78,127 @@ static int mn88472_read_status(struct dvb_frontend *fe, enum fe_status *status) goto err; } + /* Signal strength */ + if (*status & FE_HAS_SIGNAL) { + for (i = 0; i < 2; i++) { + ret = regmap_bulk_read(dev->regmap[2], 0x8e + i, + &buf[i], 1); + if (ret) + goto err; + } + + utmp1 = buf[0] << 8 | buf[1] << 0 | buf[0] >> 2; + dev_dbg(&client->dev, "strength=%u\n", utmp1); + + c->strength.stat[0].scale = FE_SCALE_RELATIVE; + c->strength.stat[0].uvalue = utmp1; + } else { + c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + } + + /* CNR */ + if (*status & FE_HAS_VITERBI && c->delivery_system == SYS_DVBT) { + /* DVB-T CNR */ + ret = regmap_bulk_read(dev->regmap[0], 0x9c, buf, 2); + if (ret) + goto err; + + utmp = buf[0] << 8 | buf[1] << 0; + if (utmp) { + /* CNR[dB]: 10 * log10(65536 / value) + 2 */ + /* log10(65536) = 80807124, 0.2 = 3355443 */ + stmp = ((u64)80807124 - intlog10(utmp) + 3355443) + * 10000 >> 24; + + dev_dbg(&client->dev, "cnr=%d value=%u\n", stmp, utmp); + } else { + stmp = 0; + } + + c->cnr.stat[0].svalue = stmp; + c->cnr.stat[0].scale = FE_SCALE_DECIBEL; + } else if (*status & FE_HAS_VITERBI && + c->delivery_system == SYS_DVBT2) { + /* DVB-T2 CNR */ + for (i = 0; i < 3; i++) { + ret = regmap_bulk_read(dev->regmap[2], 0xbc + i, + &buf[i], 1); + if (ret) + goto err; + } + + utmp = buf[1] << 8 | buf[2] << 0; + utmp1 = (buf[0] >> 2) & 0x01; /* 0=SISO, 1=MISO */ + if (utmp) { + if (utmp1) { + /* CNR[dB]: 10 * log10(16384 / value) - 6 */ + /* log10(16384) = 70706234, 0.6 = 10066330 */ + stmp = ((u64)70706234 - intlog10(utmp) + - 10066330) * 10000 >> 24; + dev_dbg(&client->dev, "cnr=%d value=%u MISO\n", + stmp, utmp); + } else { + /* CNR[dB]: 10 * log10(65536 / value) + 2 */ + /* log10(65536) = 80807124, 0.2 = 3355443 */ + stmp = ((u64)80807124 - intlog10(utmp) + + 3355443) * 10000 >> 24; + + dev_dbg(&client->dev, "cnr=%d value=%u SISO\n", + stmp, utmp); + } + } else { + stmp = 0; + } + + c->cnr.stat[0].svalue = stmp; + c->cnr.stat[0].scale = FE_SCALE_DECIBEL; + } else if (*status & FE_HAS_VITERBI && + c->delivery_system == SYS_DVBC_ANNEX_A) { + /* DVB-C CNR */ + ret = regmap_bulk_read(dev->regmap[1], 0xa1, buf, 4); + if (ret) + goto err; + + utmp1 = buf[0] << 8 | buf[1] << 0; /* signal */ + utmp2 = buf[2] << 8 | buf[3] << 0; /* noise */ + if (utmp1 && utmp2) { + /* CNR[dB]: 10 * log10(8 * (signal / noise)) */ + /* log10(8) = 15151336 */ + stmp = ((u64)15151336 + intlog10(utmp1) + - intlog10(utmp2)) * 10000 >> 24; + + dev_dbg(&client->dev, "cnr=%d signal=%u noise=%u\n", + stmp, utmp1, utmp2); + } else { + stmp = 0; + } + + c->cnr.stat[0].svalue = stmp; + c->cnr.stat[0].scale = FE_SCALE_DECIBEL; + } else { + c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + } + + /* PER */ + if (*status & FE_HAS_SYNC) { + ret = regmap_bulk_read(dev->regmap[0], 0xe1, buf, 4); + if (ret) + goto err; + + utmp1 = buf[0] << 8 | buf[1] << 0; + utmp2 = buf[2] << 8 | buf[3] << 0; + dev_dbg(&client->dev, "block_error=%u block_count=%u\n", + utmp1, utmp2); + + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_error.stat[0].uvalue += utmp1; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].uvalue += utmp2; + } else { + c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; + } + return 0; err: dev_dbg(&client->dev, "failed=%d\n", ret); @@ -462,6 +584,7 @@ static int mn88472_probe(struct i2c_client *client, { struct mn88472_config *pdata = client->dev.platform_data; struct mn88472_dev *dev; + struct dtv_frontend_properties *c; int ret; unsigned int utmp; static const struct regmap_config regmap_config = { @@ -547,6 +670,13 @@ static int mn88472_probe(struct i2c_client *client, *pdata->fe = &dev->fe; i2c_set_clientdata(client, dev); + /* Init stats to indicate which stats are supported */ + c = &dev->fe.dtv_property_cache; + c->strength.len = 1; + c->cnr.len = 1; + c->block_error.len = 1; + c->block_count.len = 1; + /* Setup callbacks */ pdata->get_dvb_frontend = mn88472_get_dvb_frontend; diff --git a/drivers/media/dvb-frontends/mn88472_priv.h b/drivers/media/dvb-frontends/mn88472_priv.h index cdf2597a25d1..fb50f56ba30b 100644 --- a/drivers/media/dvb-frontends/mn88472_priv.h +++ b/drivers/media/dvb-frontends/mn88472_priv.h @@ -18,6 +18,7 @@ #define MN88472_PRIV_H #include "dvb_frontend.h" +#include "dvb_math.h" #include "mn88472.h" #include <linux/firmware.h> #include <linux/regmap.h> diff --git a/drivers/media/dvb-frontends/si2168.c b/drivers/media/dvb-frontends/si2168.c index 680ba06c29fb..172fc367ccaa 100644 --- a/drivers/media/dvb-frontends/si2168.c +++ b/drivers/media/dvb-frontends/si2168.c @@ -740,6 +740,9 @@ static int si2168_probe(struct i2c_client *client, case SI2168_CHIP_ID_B40: dev->firmware_name = SI2168_B40_FIRMWARE; break; + case SI2168_CHIP_ID_D60: + dev->firmware_name = SI2168_D60_FIRMWARE; + break; default: dev_dbg(&client->dev, "unknown chip version Si21%d-%c%c%c\n", cmd.args[2], cmd.args[1], cmd.args[3], cmd.args[4]); @@ -827,3 +830,4 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE(SI2168_A20_FIRMWARE); MODULE_FIRMWARE(SI2168_A30_FIRMWARE); MODULE_FIRMWARE(SI2168_B40_FIRMWARE); +MODULE_FIRMWARE(SI2168_D60_FIRMWARE); diff --git a/drivers/media/dvb-frontends/si2168_priv.h b/drivers/media/dvb-frontends/si2168_priv.h index 2fecac6231ff..737cf416fbb2 100644 --- a/drivers/media/dvb-frontends/si2168_priv.h +++ b/drivers/media/dvb-frontends/si2168_priv.h @@ -26,6 +26,7 @@ #define SI2168_A20_FIRMWARE "dvb-demod-si2168-a20-01.fw" #define SI2168_A30_FIRMWARE "dvb-demod-si2168-a30-01.fw" #define SI2168_B40_FIRMWARE "dvb-demod-si2168-b40-01.fw" +#define SI2168_D60_FIRMWARE "dvb-demod-si2168-d60-01.fw" #define SI2168_B40_FIRMWARE_FALLBACK "dvb-demod-si2168-02.fw" /* state struct */ @@ -38,6 +39,7 @@ struct si2168_dev { #define SI2168_CHIP_ID_A20 ('A' << 24 | 68 << 16 | '2' << 8 | '0' << 0) #define SI2168_CHIP_ID_A30 ('A' << 24 | 68 << 16 | '3' << 8 | '0' << 0) #define SI2168_CHIP_ID_B40 ('B' << 24 | 68 << 16 | '4' << 8 | '0' << 0) + #define SI2168_CHIP_ID_D60 ('D' << 24 | 68 << 16 | '6' << 8 | '0' << 0) unsigned int chip_id; unsigned int version; const char *firmware_name; diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index cee1dae6e014..fd181c99ce11 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -209,7 +209,6 @@ config VIDEO_ADV7604 depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API depends on GPIOLIB || COMPILE_TEST select HDMI - select MEDIA_CEC_EDID ---help--- Support for the Analog Devices ADV7604 video decoder. @@ -221,7 +220,7 @@ config VIDEO_ADV7604 config VIDEO_ADV7604_CEC bool "Enable Analog Devices ADV7604 CEC support" - depends on VIDEO_ADV7604 && MEDIA_CEC_SUPPORT + depends on VIDEO_ADV7604 && CEC_CORE ---help--- When selected the adv7604 will support the optional HDMI CEC feature. @@ -230,7 +229,6 @@ config VIDEO_ADV7842 tristate "Analog Devices ADV7842 decoder" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API select HDMI - select MEDIA_CEC_EDID ---help--- Support for the Analog Devices ADV7842 video decoder. @@ -242,7 +240,7 @@ config VIDEO_ADV7842 config VIDEO_ADV7842_CEC bool "Enable Analog Devices ADV7842 CEC support" - depends on VIDEO_ADV7842 && MEDIA_CEC_SUPPORT + depends on VIDEO_ADV7842 && CEC_CORE ---help--- When selected the adv7842 will support the optional HDMI CEC feature. @@ -470,7 +468,6 @@ config VIDEO_ADV7511 tristate "Analog Devices ADV7511 encoder" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API select HDMI - select MEDIA_CEC_EDID ---help--- Support for the Analog Devices ADV7511 video encoder. @@ -481,7 +478,7 @@ config VIDEO_ADV7511 config VIDEO_ADV7511_CEC bool "Enable Analog Devices ADV7511 CEC support" - depends on VIDEO_ADV7511 && MEDIA_CEC_SUPPORT + depends on VIDEO_ADV7511 && CEC_CORE ---help--- When selected the adv7511 will support the optional HDMI CEC feature. @@ -520,6 +517,17 @@ config VIDEO_APTINA_PLL config VIDEO_SMIAPP_PLL tristate +config VIDEO_OV2640 + tristate "OmniVision OV2640 sensor support" + depends on VIDEO_V4L2 && I2C + depends on MEDIA_CAMERA_SUPPORT + help + This is a Video4Linux2 sensor-level driver for the OmniVision + OV2640 camera. + + To compile this driver as a module, choose M here: the + module will be called ov2640. + config VIDEO_OV2659 tristate "OmniVision OV2659 sensor support" depends on VIDEO_V4L2 && I2C @@ -531,6 +539,29 @@ config VIDEO_OV2659 To compile this driver as a module, choose M here: the module will be called ov2659. +config VIDEO_OV5645 + tristate "OmniVision OV5645 sensor support" + depends on OF + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the OmniVision + OV5645 camera. + + To compile this driver as a module, choose M here: the + module will be called ov5645. + +config VIDEO_OV5647 + tristate "OmniVision OV5647 sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + depends on MEDIA_CAMERA_SUPPORT + ---help--- + This is a Video4Linux2 sensor-level driver for the OmniVision + OV5647 camera. + + To compile this driver as a module, choose M here: the + module will be called ov5647. + config VIDEO_OV7640 tristate "OmniVision OV7640 sensor support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 5bc7bbeb5499..62323ec66be8 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -57,6 +57,9 @@ obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o +obj-$(CONFIG_VIDEO_OV2640) += ov2640.o +obj-$(CONFIG_VIDEO_OV5645) += ov5645.o +obj-$(CONFIG_VIDEO_OV5647) += ov5647.o obj-$(CONFIG_VIDEO_OV7640) += ov7640.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_OV9650) += ov9650.o diff --git a/drivers/media/i2c/ad5820.c b/drivers/media/i2c/ad5820.c index a9026a91855e..3d2a3c6b67d8 100644 --- a/drivers/media/i2c/ad5820.c +++ b/drivers/media/i2c/ad5820.c @@ -336,7 +336,7 @@ cleanup: return ret; } -static int __exit ad5820_remove(struct i2c_client *client) +static int ad5820_remove(struct i2c_client *client) { struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct ad5820_device *coil = to_ad5820_device(subdev); @@ -362,7 +362,7 @@ static struct i2c_driver ad5820_i2c_driver = { .pm = &ad5820_pm, }, .probe = ad5820_probe, - .remove = __exit_p(ad5820_remove), + .remove = ad5820_remove, .id_table = ad5820_id_table, }; diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c index 8c9e28949ab1..ccc478605643 100644 --- a/drivers/media/i2c/adv7511.c +++ b/drivers/media/i2c/adv7511.c @@ -734,7 +734,7 @@ static int adv7511_s_power(struct v4l2_subdev *sd, int on) #if IS_ENABLED(CONFIG_VIDEO_ADV7511_CEC) static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable) { - struct adv7511_state *state = adap->priv; + struct adv7511_state *state = cec_get_drvdata(adap); struct v4l2_subdev *sd = &state->sd; if (state->i2c_cec == NULL) @@ -769,7 +769,7 @@ static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable) static int adv7511_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) { - struct adv7511_state *state = adap->priv; + struct adv7511_state *state = cec_get_drvdata(adap); struct v4l2_subdev *sd = &state->sd; unsigned int i, free_idx = ADV7511_MAX_ADDRS; @@ -824,7 +824,7 @@ static int adv7511_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) static int adv7511_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg) { - struct adv7511_state *state = adap->priv; + struct adv7511_state *state = cec_get_drvdata(adap); struct v4l2_subdev *sd = &state->sd; u8 len = msg->len; unsigned int i; diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index d8bf435db86d..f1fa9cec489f 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -2050,7 +2050,7 @@ static void adv76xx_cec_isr(struct v4l2_subdev *sd, bool *handled) static int adv76xx_cec_adap_enable(struct cec_adapter *adap, bool enable) { - struct adv76xx_state *state = adap->priv; + struct adv76xx_state *state = cec_get_drvdata(adap); struct v4l2_subdev *sd = &state->sd; if (!state->cec_enabled_adap && enable) { @@ -2080,7 +2080,7 @@ static int adv76xx_cec_adap_enable(struct cec_adapter *adap, bool enable) static int adv76xx_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) { - struct adv76xx_state *state = adap->priv; + struct adv76xx_state *state = cec_get_drvdata(adap); struct v4l2_subdev *sd = &state->sd; unsigned int i, free_idx = ADV76XX_MAX_ADDRS; @@ -2135,7 +2135,7 @@ static int adv76xx_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) static int adv76xx_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg) { - struct adv76xx_state *state = adap->priv; + struct adv76xx_state *state = cec_get_drvdata(adap); struct v4l2_subdev *sd = &state->sd; u8 len = msg->len; unsigned int i; diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c index 2d61f0cc2b5b..303effda1a2e 100644 --- a/drivers/media/i2c/adv7842.c +++ b/drivers/media/i2c/adv7842.c @@ -2250,7 +2250,7 @@ static void adv7842_cec_isr(struct v4l2_subdev *sd, bool *handled) static int adv7842_cec_adap_enable(struct cec_adapter *adap, bool enable) { - struct adv7842_state *state = adap->priv; + struct adv7842_state *state = cec_get_drvdata(adap); struct v4l2_subdev *sd = &state->sd; if (!state->cec_enabled_adap && enable) { @@ -2279,7 +2279,7 @@ static int adv7842_cec_adap_enable(struct cec_adapter *adap, bool enable) static int adv7842_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) { - struct adv7842_state *state = adap->priv; + struct adv7842_state *state = cec_get_drvdata(adap); struct v4l2_subdev *sd = &state->sd; unsigned int i, free_idx = ADV7842_MAX_ADDRS; @@ -2334,7 +2334,7 @@ static int adv7842_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) static int adv7842_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg) { - struct adv7842_state *state = adap->priv; + struct adv7842_state *state = cec_get_drvdata(adap); struct v4l2_subdev *sd = &state->sd; u8 len = msg->len; unsigned int i; diff --git a/drivers/media/i2c/et8ek8/et8ek8_driver.c b/drivers/media/i2c/et8ek8/et8ek8_driver.c index bec4a563a09c..6e313d5243a0 100644 --- a/drivers/media/i2c/et8ek8/et8ek8_driver.c +++ b/drivers/media/i2c/et8ek8/et8ek8_driver.c @@ -1485,6 +1485,7 @@ static const struct of_device_id et8ek8_of_table[] = { { .compatible = "toshiba,et8ek8" }, { }, }; +MODULE_DEVICE_TABLE(of, et8ek8_of_table); static const struct i2c_device_id et8ek8_id_table[] = { { ET8EK8_NAME, 0 }, @@ -1495,6 +1496,7 @@ MODULE_DEVICE_TABLE(i2c, et8ek8_id_table); static const struct dev_pm_ops et8ek8_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(et8ek8_suspend, et8ek8_resume) }; +MODULE_DEVICE_TABLE(of, et8ek8_of_table); static struct i2c_driver et8ek8_i2c_driver = { .driver = { diff --git a/drivers/media/i2c/soc_camera/ov2640.c b/drivers/media/i2c/ov2640.c index 56de18263359..e6d0c1f64f0b 100644 --- a/drivers/media/i2c/soc_camera/ov2640.c +++ b/drivers/media/i2c/ov2640.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/i2c.h> +#include <linux/clk.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/gpio.h> @@ -24,8 +25,7 @@ #include <linux/v4l2-mediabus.h> #include <linux/videodev2.h> -#include <media/soc_camera.h> -#include <media/v4l2-clk.h> +#include <media/v4l2-device.h> #include <media/v4l2-subdev.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-image-sizes.h> @@ -106,6 +106,10 @@ #define CTRL1_AWB_GAIN 0x04 #define CTRL1_LENC 0x02 #define CTRL1_PRE 0x01 +/* REG 0xC7 (unknown name): affects Auto White Balance (AWB) + * AWB_OFF 0x40 + * AWB_SIMPLE 0x10 + * AWB_ON 0x00 (Advanced AWB ?) */ #define R_DVP_SP 0xD3 /* DVP output speed control */ #define R_DVP_SP_AUTO_MODE 0x80 #define R_DVP_SP_DVP_MASK 0x3F /* DVP PCLK = sysclk (48)/[6:0] (YUV0); @@ -199,7 +203,7 @@ #define COM7_ZOOM_EN 0x04 /* Enable Zoom mode */ #define COM7_COLOR_BAR_TEST 0x02 /* Enable Color Bar Test Pattern */ #define COM8 0x13 /* Common control 8 */ -#define COM8_DEF 0xC0 /* Banding filter ON/OFF */ +#define COM8_DEF 0xC0 #define COM8_BNDF_EN 0x20 /* Banding filter ON/OFF */ #define COM8_AGC_EN 0x04 /* AGC Auto/Manual control selection */ #define COM8_AEC_EN 0x01 /* Auto/Manual Exposure control */ @@ -248,8 +252,19 @@ #define ZOOMS 0x49 /* Zoom: Vertical start point */ #define COM22 0x4B /* Flash light control */ #define COM25 0x4E /* For Banding operations */ +#define COM25_50HZ_BANDING_AEC_MSBS_MASK 0xC0 /* 50Hz Bd. AEC 2 MSBs */ +#define COM25_60HZ_BANDING_AEC_MSBS_MASK 0x30 /* 60Hz Bd. AEC 2 MSBs */ +#define COM25_50HZ_BANDING_AEC_MSBS_SET(x) VAL_SET(x, 0x3, 8, 6) +#define COM25_60HZ_BANDING_AEC_MSBS_SET(x) VAL_SET(x, 0x3, 8, 4) #define BD50 0x4F /* 50Hz Banding AEC 8 LSBs */ +#define BD50_50HZ_BANDING_AEC_LSBS_SET(x) VAL_SET(x, 0xFF, 0, 0) #define BD60 0x50 /* 60Hz Banding AEC 8 LSBs */ +#define BD60_60HZ_BANDING_AEC_LSBS_SET(x) VAL_SET(x, 0xFF, 0, 0) +#define REG5A 0x5A /* 50/60Hz Banding Maximum AEC Step */ +#define BD50_MAX_AEC_STEP_MASK 0xF0 /* 50Hz Banding Max. AEC Step */ +#define BD60_MAX_AEC_STEP_MASK 0x0F /* 60Hz Banding Max. AEC Step */ +#define BD50_MAX_AEC_STEP_SET(x) VAL_SET((x - 1), 0x0F, 0, 4) +#define BD60_MAX_AEC_STEP_SET(x) VAL_SET((x - 1), 0x0F, 0, 0) #define REG5D 0x5D /* AVGsel[7:0], 16-zone average weight option */ #define REG5E 0x5E /* AVGsel[15:8], 16-zone average weight option */ #define REG5F 0x5F /* AVGsel[23:16], 16-zone average weight option */ @@ -282,12 +297,14 @@ struct ov2640_win_size { struct ov2640_priv { struct v4l2_subdev subdev; +#if defined(CONFIG_MEDIA_CONTROLLER) + struct media_pad pad; +#endif struct v4l2_ctrl_handler hdl; u32 cfmt_code; - struct v4l2_clk *clk; + struct clk *clk; const struct ov2640_win_size *win; - struct soc_camera_subdev_desc ssdd_dt; struct gpio_desc *resetb_gpio; struct gpio_desc *pwdn_gpio; }; @@ -304,11 +321,11 @@ static const struct regval_list ov2640_init_regs[] = { { 0x2e, 0xdf }, { BANK_SEL, BANK_SEL_SENS }, { 0x3c, 0x32 }, - { CLKRC, CLKRC_DIV_SET(1) }, - { COM2, COM2_OCAP_Nx_SET(3) }, - { REG04, REG04_DEF | REG04_HREF_EN }, - { COM8, COM8_DEF | COM8_BNDF_EN | COM8_AGC_EN | COM8_AEC_EN }, - { COM9, COM9_AGC_GAIN_8x | 0x08}, + { CLKRC, CLKRC_DIV_SET(1) }, + { COM2, COM2_OCAP_Nx_SET(3) }, + { REG04, REG04_DEF | REG04_HREF_EN }, + { COM8, COM8_DEF | COM8_BNDF_EN | COM8_AGC_EN | COM8_AEC_EN }, + { COM9, COM9_AGC_GAIN_8x | 0x08}, { 0x2c, 0x0c }, { 0x33, 0x78 }, { 0x3a, 0x33 }, @@ -353,25 +370,28 @@ static const struct regval_list ov2640_init_regs[] = { { 0x71, 0x94 }, { 0x73, 0xc1 }, { 0x3d, 0x34 }, - { COM7, COM7_RES_UXGA | COM7_ZOOM_EN }, - { 0x5a, 0x57 }, - { BD50, 0xbb }, - { BD60, 0x9c }, - { BANK_SEL, BANK_SEL_DSP }, + { COM7, COM7_RES_UXGA | COM7_ZOOM_EN }, + { REG5A, BD50_MAX_AEC_STEP_SET(6) + | BD60_MAX_AEC_STEP_SET(8) }, /* 0x57 */ + { COM25, COM25_50HZ_BANDING_AEC_MSBS_SET(0x0bb) + | COM25_60HZ_BANDING_AEC_MSBS_SET(0x09c) }, /* 0x00 */ + { BD50, BD50_50HZ_BANDING_AEC_LSBS_SET(0x0bb) }, /* 0xbb */ + { BD60, BD60_60HZ_BANDING_AEC_LSBS_SET(0x09c) }, /* 0x9c */ + { BANK_SEL, BANK_SEL_DSP }, { 0xe5, 0x7f }, - { MC_BIST, MC_BIST_RESET | MC_BIST_BOOT_ROM_SEL }, + { MC_BIST, MC_BIST_RESET | MC_BIST_BOOT_ROM_SEL }, { 0x41, 0x24 }, - { RESET, RESET_JPEG | RESET_DVP }, + { RESET, RESET_JPEG | RESET_DVP }, { 0x76, 0xff }, { 0x33, 0xa0 }, { 0x42, 0x20 }, { 0x43, 0x18 }, { 0x4c, 0x00 }, - { CTRL3, CTRL3_BPC_EN | CTRL3_WPC_EN | 0x10 }, + { CTRL3, CTRL3_BPC_EN | CTRL3_WPC_EN | 0x10 }, { 0x88, 0x3f }, { 0xd7, 0x03 }, { 0xd9, 0x10 }, - { R_DVP_SP , R_DVP_SP_AUTO_MODE | 0x2 }, + { R_DVP_SP, R_DVP_SP_AUTO_MODE | 0x2 }, { 0xc8, 0x08 }, { 0xc9, 0x80 }, { BPADDR, 0x00 }, @@ -433,7 +453,7 @@ static const struct regval_list ov2640_init_regs[] = { { 0xc5, 0x11 }, { 0xc6, 0x51 }, { 0xbf, 0x80 }, - { 0xc7, 0x10 }, + { 0xc7, 0x10 }, /* simple AWB */ { 0xb6, 0x66 }, { 0xb8, 0xA5 }, { 0xb7, 0x64 }, @@ -480,6 +500,9 @@ static const struct regval_list ov2640_init_regs[] = { static const struct regval_list ov2640_size_change_preamble_regs[] = { { BANK_SEL, BANK_SEL_DSP }, { RESET, RESET_DVP }, + { SIZEL, SIZEL_HSIZE8_11_SET(UXGA_WIDTH) | + SIZEL_HSIZE8_SET(UXGA_WIDTH) | + SIZEL_VSIZE8_SET(UXGA_HEIGHT) }, { HSIZE8, HSIZE8_SET(UXGA_WIDTH) }, { VSIZE8, VSIZE8_SET(UXGA_HEIGHT) }, { CTRL2, CTRL2_DCW_EN | CTRL2_SDE_EN | @@ -611,6 +634,8 @@ static const struct regval_list ov2640_rgb565_le_regs[] = { static u32 ov2640_codes[] = { MEDIA_BUS_FMT_YUYV8_2X8, MEDIA_BUS_FMT_UYVY8_2X8, + MEDIA_BUS_FMT_YVYU8_2X8, + MEDIA_BUS_FMT_VYUY8_2X8, MEDIA_BUS_FMT_RGB565_2X8_BE, MEDIA_BUS_FMT_RGB565_2X8_LE, }; @@ -677,13 +702,8 @@ err: } /* - * soc_camera_ops functions + * functions */ -static int ov2640_s_stream(struct v4l2_subdev *sd, int enable) -{ - return 0; -} - static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl) { struct v4l2_subdev *sd = @@ -698,8 +718,10 @@ static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl) switch (ctrl->id) { case V4L2_CID_VFLIP: - val = ctrl->val ? REG04_VFLIP_IMG : 0x00; - return ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val); + val = ctrl->val ? REG04_VFLIP_IMG | REG04_VREF_EN : 0x00; + return ov2640_mask_set(client, REG04, + REG04_VFLIP_IMG | REG04_VREF_EN, val); + /* NOTE: REG04_VREF_EN: 1 line shift / even/odd line swap */ case V4L2_CID_HFLIP: val = ctrl->val ? REG04_HFLIP_IMG : 0x00; return ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val); @@ -743,41 +765,46 @@ static int ov2640_s_register(struct v4l2_subdev *sd, static int ov2640_s_power(struct v4l2_subdev *sd, int on) { +#ifdef CONFIG_GPIOLIB struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); struct ov2640_priv *priv = to_ov2640(client); - return soc_camera_set_power(&client->dev, ssdd, priv->clk, on); + if (priv->pwdn_gpio) + gpiod_direction_output(priv->pwdn_gpio, !on); + if (on && priv->resetb_gpio) { + /* Active the resetb pin to perform a reset pulse */ + gpiod_direction_output(priv->resetb_gpio, 1); + usleep_range(3000, 5000); + gpiod_set_value(priv->resetb_gpio, 0); + } +#endif + return 0; } /* Select the nearest higher resolution for capture */ -static const struct ov2640_win_size *ov2640_select_win(u32 *width, u32 *height) +static const struct ov2640_win_size *ov2640_select_win(u32 width, u32 height) { int i, default_size = ARRAY_SIZE(ov2640_supported_win_sizes) - 1; for (i = 0; i < ARRAY_SIZE(ov2640_supported_win_sizes); i++) { - if (ov2640_supported_win_sizes[i].width >= *width && - ov2640_supported_win_sizes[i].height >= *height) { - *width = ov2640_supported_win_sizes[i].width; - *height = ov2640_supported_win_sizes[i].height; + if (ov2640_supported_win_sizes[i].width >= width && + ov2640_supported_win_sizes[i].height >= height) return &ov2640_supported_win_sizes[i]; - } } - *width = ov2640_supported_win_sizes[default_size].width; - *height = ov2640_supported_win_sizes[default_size].height; return &ov2640_supported_win_sizes[default_size]; } -static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height, - u32 code) +static int ov2640_set_params(struct i2c_client *client, + const struct ov2640_win_size *win, u32 code) { struct ov2640_priv *priv = to_ov2640(client); const struct regval_list *selected_cfmt_regs; + u8 val; int ret; /* select win */ - priv->win = ov2640_select_win(width, height); + priv->win = win; /* select format */ priv->cfmt_code = 0; @@ -794,10 +821,19 @@ static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height, dev_dbg(&client->dev, "%s: Selected cfmt YUYV (YUV422)", __func__); selected_cfmt_regs = ov2640_yuyv_regs; break; - default: case MEDIA_BUS_FMT_UYVY8_2X8: + default: dev_dbg(&client->dev, "%s: Selected cfmt UYVY", __func__); selected_cfmt_regs = ov2640_uyvy_regs; + break; + case MEDIA_BUS_FMT_YVYU8_2X8: + dev_dbg(&client->dev, "%s: Selected cfmt YVYU", __func__); + selected_cfmt_regs = ov2640_yuyv_regs; + break; + case MEDIA_BUS_FMT_VYUY8_2X8: + dev_dbg(&client->dev, "%s: Selected cfmt VYUY", __func__); + selected_cfmt_regs = ov2640_uyvy_regs; + break; } /* reset hardware */ @@ -830,10 +866,13 @@ static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height, ret = ov2640_write_array(client, selected_cfmt_regs); if (ret < 0) goto err; + val = (code == MEDIA_BUS_FMT_YVYU8_2X8) + || (code == MEDIA_BUS_FMT_VYUY8_2X8) ? CTRL0_VFIRST : 0x00; + ret = ov2640_mask_set(client, CTRL0, CTRL0_VFIRST, val); + if (ret < 0) + goto err; priv->cfmt_code = code; - *width = priv->win->width; - *height = priv->win->height; return 0; @@ -857,25 +896,14 @@ static int ov2640_get_fmt(struct v4l2_subdev *sd, return -EINVAL; if (!priv->win) { - u32 width = SVGA_WIDTH, height = SVGA_HEIGHT; - priv->win = ov2640_select_win(&width, &height); + priv->win = ov2640_select_win(SVGA_WIDTH, SVGA_HEIGHT); priv->cfmt_code = MEDIA_BUS_FMT_UYVY8_2X8; } mf->width = priv->win->width; mf->height = priv->win->height; mf->code = priv->cfmt_code; - - switch (mf->code) { - case MEDIA_BUS_FMT_RGB565_2X8_BE: - case MEDIA_BUS_FMT_RGB565_2X8_LE: - mf->colorspace = V4L2_COLORSPACE_SRGB; - break; - default: - case MEDIA_BUS_FMT_YUYV8_2X8: - case MEDIA_BUS_FMT_UYVY8_2X8: - mf->colorspace = V4L2_COLORSPACE_JPEG; - } + mf->colorspace = V4L2_COLORSPACE_SRGB; mf->field = V4L2_FIELD_NONE; return 0; @@ -887,32 +915,34 @@ static int ov2640_set_fmt(struct v4l2_subdev *sd, { struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); + const struct ov2640_win_size *win; if (format->pad) return -EINVAL; - /* - * select suitable win, but don't store it - */ - ov2640_select_win(&mf->width, &mf->height); + /* select suitable win */ + win = ov2640_select_win(mf->width, mf->height); + mf->width = win->width; + mf->height = win->height; mf->field = V4L2_FIELD_NONE; + mf->colorspace = V4L2_COLORSPACE_SRGB; switch (mf->code) { case MEDIA_BUS_FMT_RGB565_2X8_BE: case MEDIA_BUS_FMT_RGB565_2X8_LE: - mf->colorspace = V4L2_COLORSPACE_SRGB; + case MEDIA_BUS_FMT_YUYV8_2X8: + case MEDIA_BUS_FMT_UYVY8_2X8: + case MEDIA_BUS_FMT_YVYU8_2X8: + case MEDIA_BUS_FMT_VYUY8_2X8: break; default: mf->code = MEDIA_BUS_FMT_UYVY8_2X8; - case MEDIA_BUS_FMT_YUYV8_2X8: - case MEDIA_BUS_FMT_UYVY8_2X8: - mf->colorspace = V4L2_COLORSPACE_JPEG; + break; } if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) - return ov2640_set_params(client, &mf->width, - &mf->height, mf->code); + return ov2640_set_params(client, win, mf->code); cfg->try_fmt = *mf; return 0; } @@ -995,7 +1025,7 @@ static const struct v4l2_ctrl_ops ov2640_ctrl_ops = { .s_ctrl = ov2640_s_ctrl, }; -static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = { +static const struct v4l2_subdev_core_ops ov2640_subdev_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov2640_g_register, .s_register = ov2640_s_register, @@ -1003,26 +1033,6 @@ static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = { .s_power = ov2640_s_power, }; -static int ov2640_g_mbus_config(struct v4l2_subdev *sd, - struct v4l2_mbus_config *cfg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); - - cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | - V4L2_MBUS_DATA_ACTIVE_HIGH; - cfg->type = V4L2_MBUS_PARALLEL; - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg); - - return 0; -} - -static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = { - .s_stream = ov2640_s_stream, - .g_mbus_config = ov2640_g_mbus_config, -}; - static const struct v4l2_subdev_pad_ops ov2640_subdev_pad_ops = { .enum_mbus_code = ov2640_enum_mbus_code, .get_selection = ov2640_get_selection, @@ -1030,65 +1040,43 @@ static const struct v4l2_subdev_pad_ops ov2640_subdev_pad_ops = { .set_fmt = ov2640_set_fmt, }; -static struct v4l2_subdev_ops ov2640_subdev_ops = { +static const struct v4l2_subdev_ops ov2640_subdev_ops = { .core = &ov2640_subdev_core_ops, - .video = &ov2640_subdev_video_ops, .pad = &ov2640_subdev_pad_ops, }; -/* OF probe functions */ -static int ov2640_hw_power(struct device *dev, int on) -{ - struct i2c_client *client = to_i2c_client(dev); - struct ov2640_priv *priv = to_ov2640(client); - - dev_dbg(&client->dev, "%s: %s the camera\n", - __func__, on ? "ENABLE" : "DISABLE"); - - if (priv->pwdn_gpio) - gpiod_direction_output(priv->pwdn_gpio, !on); - - return 0; -} - -static int ov2640_hw_reset(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct ov2640_priv *priv = to_ov2640(client); - - if (priv->resetb_gpio) { - /* Active the resetb pin to perform a reset pulse */ - gpiod_direction_output(priv->resetb_gpio, 1); - usleep_range(3000, 5000); - gpiod_direction_output(priv->resetb_gpio, 0); - } - - return 0; -} - static int ov2640_probe_dt(struct i2c_client *client, struct ov2640_priv *priv) { + int ret; + /* Request the reset GPIO deasserted */ priv->resetb_gpio = devm_gpiod_get_optional(&client->dev, "resetb", GPIOD_OUT_LOW); + if (!priv->resetb_gpio) dev_dbg(&client->dev, "resetb gpio is not assigned!\n"); - else if (IS_ERR(priv->resetb_gpio)) - return PTR_ERR(priv->resetb_gpio); + + ret = PTR_ERR_OR_ZERO(priv->resetb_gpio); + if (ret && ret != -ENOSYS) { + dev_dbg(&client->dev, + "Error %d while getting resetb gpio\n", ret); + return ret; + } /* Request the power down GPIO asserted */ priv->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "pwdn", GPIOD_OUT_HIGH); + if (!priv->pwdn_gpio) dev_dbg(&client->dev, "pwdn gpio is not assigned!\n"); - else if (IS_ERR(priv->pwdn_gpio)) - return PTR_ERR(priv->pwdn_gpio); - /* Initialize the soc_camera_subdev_desc */ - priv->ssdd_dt.power = ov2640_hw_power; - priv->ssdd_dt.reset = ov2640_hw_reset; - client->dev.platform_data = &priv->ssdd_dt; + ret = PTR_ERR_OR_ZERO(priv->pwdn_gpio); + if (ret && ret != -ENOSYS) { + dev_dbg(&client->dev, + "Error %d while getting pwdn gpio\n", ret); + return ret; + } return 0; } @@ -1100,7 +1088,6 @@ static int ov2640_probe(struct i2c_client *client, const struct i2c_device_id *did) { struct ov2640_priv *priv; - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client); struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); int ret; @@ -1117,23 +1104,19 @@ static int ov2640_probe(struct i2c_client *client, return -ENOMEM; } - priv->clk = v4l2_clk_get(&client->dev, "xvclk"); - if (IS_ERR(priv->clk)) - return -EPROBE_DEFER; - - if (!ssdd && !client->dev.of_node) { - dev_err(&client->dev, "Missing platform_data for driver\n"); - ret = -EINVAL; - goto err_clk; + if (client->dev.of_node) { + priv->clk = devm_clk_get(&client->dev, "xvclk"); + if (IS_ERR(priv->clk)) + return -EPROBE_DEFER; + clk_prepare_enable(priv->clk); } - if (!ssdd) { - ret = ov2640_probe_dt(client, priv); - if (ret) - goto err_clk; - } + ret = ov2640_probe_dt(client, priv); + if (ret) + goto err_clk; v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops); + priv->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE; v4l2_ctrl_handler_init(&priv->hdl, 2); v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); @@ -1142,8 +1125,15 @@ static int ov2640_probe(struct i2c_client *client, priv->subdev.ctrl_handler = &priv->hdl; if (priv->hdl.error) { ret = priv->hdl.error; - goto err_clk; + goto err_hdl; } +#if defined(CONFIG_MEDIA_CONTROLLER) + priv->pad.flags = MEDIA_PAD_FL_SOURCE; + priv->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&priv->subdev.entity, 1, &priv->pad); + if (ret < 0) + goto err_hdl; +#endif ret = ov2640_video_probe(client); if (ret < 0) @@ -1158,9 +1148,13 @@ static int ov2640_probe(struct i2c_client *client, return 0; err_videoprobe: +#if defined(CONFIG_MEDIA_CONTROLLER) + media_entity_cleanup(&priv->subdev.entity); +#endif +err_hdl: v4l2_ctrl_handler_free(&priv->hdl); err_clk: - v4l2_clk_put(priv->clk); + clk_disable_unprepare(priv->clk); return ret; } @@ -1169,9 +1163,12 @@ static int ov2640_remove(struct i2c_client *client) struct ov2640_priv *priv = to_ov2640(client); v4l2_async_unregister_subdev(&priv->subdev); - v4l2_clk_put(priv->clk); - v4l2_device_unregister_subdev(&priv->subdev); v4l2_ctrl_handler_free(&priv->hdl); +#if defined(CONFIG_MEDIA_CONTROLLER) + media_entity_cleanup(&priv->subdev.entity); +#endif + v4l2_device_unregister_subdev(&priv->subdev); + clk_disable_unprepare(priv->clk); return 0; } @@ -1199,6 +1196,6 @@ static struct i2c_driver ov2640_i2c_driver = { module_i2c_driver(ov2640_i2c_driver); -MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor"); +MODULE_DESCRIPTION("Driver for Omni Vision 2640 sensor"); MODULE_AUTHOR("Alberto Panizzo"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c new file mode 100644 index 000000000000..57bd591ea54b --- /dev/null +++ b/drivers/media/i2c/ov5645.c @@ -0,0 +1,1345 @@ +/* + * Driver for the OV5645 camera sensor. + * + * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. + * Copyright (C) 2015 By Tech Design S.L. All Rights Reserved. + * Copyright (C) 2012-2013 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Based on: + * - the OV5645 driver from QC msm-3.10 kernel on codeaurora.org: + * https://us.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/ + * media/platform/msm/camera_v2/sensor/ov5645.c?h=LA.BR.1.2.4_rb1.41 + * - the OV5640 driver posted on linux-media: + * https://www.mail-archive.com/linux-media%40vger.kernel.org/msg92671.html + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_graph.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-of.h> +#include <media/v4l2-subdev.h> + +#define OV5645_VOLTAGE_ANALOG 2800000 +#define OV5645_VOLTAGE_DIGITAL_CORE 1500000 +#define OV5645_VOLTAGE_DIGITAL_IO 1800000 + +#define OV5645_SYSTEM_CTRL0 0x3008 +#define OV5645_SYSTEM_CTRL0_START 0x02 +#define OV5645_SYSTEM_CTRL0_STOP 0x42 +#define OV5645_CHIP_ID_HIGH 0x300a +#define OV5645_CHIP_ID_HIGH_BYTE 0x56 +#define OV5645_CHIP_ID_LOW 0x300b +#define OV5645_CHIP_ID_LOW_BYTE 0x45 +#define OV5645_AWB_MANUAL_CONTROL 0x3406 +#define OV5645_AWB_MANUAL_ENABLE BIT(0) +#define OV5645_AEC_PK_MANUAL 0x3503 +#define OV5645_AEC_MANUAL_ENABLE BIT(0) +#define OV5645_AGC_MANUAL_ENABLE BIT(1) +#define OV5645_TIMING_TC_REG20 0x3820 +#define OV5645_SENSOR_VFLIP BIT(1) +#define OV5645_ISP_VFLIP BIT(2) +#define OV5645_TIMING_TC_REG21 0x3821 +#define OV5645_SENSOR_MIRROR BIT(1) +#define OV5645_PRE_ISP_TEST_SETTING_1 0x503d +#define OV5645_TEST_PATTERN_MASK 0x3 +#define OV5645_SET_TEST_PATTERN(x) ((x) & OV5645_TEST_PATTERN_MASK) +#define OV5645_TEST_PATTERN_ENABLE BIT(7) +#define OV5645_SDE_SAT_U 0x5583 +#define OV5645_SDE_SAT_V 0x5584 + +struct reg_value { + u16 reg; + u8 val; +}; + +struct ov5645_mode_info { + u32 width; + u32 height; + const struct reg_value *data; + u32 data_size; +}; + +struct ov5645 { + struct i2c_client *i2c_client; + struct device *dev; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_of_endpoint ep; + struct v4l2_mbus_framefmt fmt; + struct v4l2_rect crop; + struct clk *xclk; + + struct regulator *io_regulator; + struct regulator *core_regulator; + struct regulator *analog_regulator; + + const struct ov5645_mode_info *current_mode; + + struct v4l2_ctrl_handler ctrls; + + /* Cached register values */ + u8 aec_pk_manual; + u8 timing_tc_reg20; + u8 timing_tc_reg21; + + struct mutex power_lock; /* lock to protect power state */ + int power_count; + + struct gpio_desc *enable_gpio; + struct gpio_desc *rst_gpio; +}; + +static inline struct ov5645 *to_ov5645(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ov5645, sd); +} + +static const struct reg_value ov5645_global_init_setting[] = { + { 0x3103, 0x11 }, + { 0x3008, 0x82 }, + { 0x3008, 0x42 }, + { 0x3103, 0x03 }, + { 0x3503, 0x07 }, + { 0x3002, 0x1c }, + { 0x3006, 0xc3 }, + { 0x300e, 0x45 }, + { 0x3017, 0x00 }, + { 0x3018, 0x00 }, + { 0x302e, 0x0b }, + { 0x3037, 0x13 }, + { 0x3108, 0x01 }, + { 0x3611, 0x06 }, + { 0x3500, 0x00 }, + { 0x3501, 0x01 }, + { 0x3502, 0x00 }, + { 0x350a, 0x00 }, + { 0x350b, 0x3f }, + { 0x3620, 0x33 }, + { 0x3621, 0xe0 }, + { 0x3622, 0x01 }, + { 0x3630, 0x2e }, + { 0x3631, 0x00 }, + { 0x3632, 0x32 }, + { 0x3633, 0x52 }, + { 0x3634, 0x70 }, + { 0x3635, 0x13 }, + { 0x3636, 0x03 }, + { 0x3703, 0x5a }, + { 0x3704, 0xa0 }, + { 0x3705, 0x1a }, + { 0x3709, 0x12 }, + { 0x370b, 0x61 }, + { 0x370f, 0x10 }, + { 0x3715, 0x78 }, + { 0x3717, 0x01 }, + { 0x371b, 0x20 }, + { 0x3731, 0x12 }, + { 0x3901, 0x0a }, + { 0x3905, 0x02 }, + { 0x3906, 0x10 }, + { 0x3719, 0x86 }, + { 0x3810, 0x00 }, + { 0x3811, 0x10 }, + { 0x3812, 0x00 }, + { 0x3821, 0x01 }, + { 0x3824, 0x01 }, + { 0x3826, 0x03 }, + { 0x3828, 0x08 }, + { 0x3a19, 0xf8 }, + { 0x3c01, 0x34 }, + { 0x3c04, 0x28 }, + { 0x3c05, 0x98 }, + { 0x3c07, 0x07 }, + { 0x3c09, 0xc2 }, + { 0x3c0a, 0x9c }, + { 0x3c0b, 0x40 }, + { 0x3c01, 0x34 }, + { 0x4001, 0x02 }, + { 0x4514, 0x00 }, + { 0x4520, 0xb0 }, + { 0x460b, 0x37 }, + { 0x460c, 0x20 }, + { 0x4818, 0x01 }, + { 0x481d, 0xf0 }, + { 0x481f, 0x50 }, + { 0x4823, 0x70 }, + { 0x4831, 0x14 }, + { 0x5000, 0xa7 }, + { 0x5001, 0x83 }, + { 0x501d, 0x00 }, + { 0x501f, 0x00 }, + { 0x503d, 0x00 }, + { 0x505c, 0x30 }, + { 0x5181, 0x59 }, + { 0x5183, 0x00 }, + { 0x5191, 0xf0 }, + { 0x5192, 0x03 }, + { 0x5684, 0x10 }, + { 0x5685, 0xa0 }, + { 0x5686, 0x0c }, + { 0x5687, 0x78 }, + { 0x5a00, 0x08 }, + { 0x5a21, 0x00 }, + { 0x5a24, 0x00 }, + { 0x3008, 0x02 }, + { 0x3503, 0x00 }, + { 0x5180, 0xff }, + { 0x5181, 0xf2 }, + { 0x5182, 0x00 }, + { 0x5183, 0x14 }, + { 0x5184, 0x25 }, + { 0x5185, 0x24 }, + { 0x5186, 0x09 }, + { 0x5187, 0x09 }, + { 0x5188, 0x0a }, + { 0x5189, 0x75 }, + { 0x518a, 0x52 }, + { 0x518b, 0xea }, + { 0x518c, 0xa8 }, + { 0x518d, 0x42 }, + { 0x518e, 0x38 }, + { 0x518f, 0x56 }, + { 0x5190, 0x42 }, + { 0x5191, 0xf8 }, + { 0x5192, 0x04 }, + { 0x5193, 0x70 }, + { 0x5194, 0xf0 }, + { 0x5195, 0xf0 }, + { 0x5196, 0x03 }, + { 0x5197, 0x01 }, + { 0x5198, 0x04 }, + { 0x5199, 0x12 }, + { 0x519a, 0x04 }, + { 0x519b, 0x00 }, + { 0x519c, 0x06 }, + { 0x519d, 0x82 }, + { 0x519e, 0x38 }, + { 0x5381, 0x1e }, + { 0x5382, 0x5b }, + { 0x5383, 0x08 }, + { 0x5384, 0x0a }, + { 0x5385, 0x7e }, + { 0x5386, 0x88 }, + { 0x5387, 0x7c }, + { 0x5388, 0x6c }, + { 0x5389, 0x10 }, + { 0x538a, 0x01 }, + { 0x538b, 0x98 }, + { 0x5300, 0x08 }, + { 0x5301, 0x30 }, + { 0x5302, 0x10 }, + { 0x5303, 0x00 }, + { 0x5304, 0x08 }, + { 0x5305, 0x30 }, + { 0x5306, 0x08 }, + { 0x5307, 0x16 }, + { 0x5309, 0x08 }, + { 0x530a, 0x30 }, + { 0x530b, 0x04 }, + { 0x530c, 0x06 }, + { 0x5480, 0x01 }, + { 0x5481, 0x08 }, + { 0x5482, 0x14 }, + { 0x5483, 0x28 }, + { 0x5484, 0x51 }, + { 0x5485, 0x65 }, + { 0x5486, 0x71 }, + { 0x5487, 0x7d }, + { 0x5488, 0x87 }, + { 0x5489, 0x91 }, + { 0x548a, 0x9a }, + { 0x548b, 0xaa }, + { 0x548c, 0xb8 }, + { 0x548d, 0xcd }, + { 0x548e, 0xdd }, + { 0x548f, 0xea }, + { 0x5490, 0x1d }, + { 0x5580, 0x02 }, + { 0x5583, 0x40 }, + { 0x5584, 0x10 }, + { 0x5589, 0x10 }, + { 0x558a, 0x00 }, + { 0x558b, 0xf8 }, + { 0x5800, 0x3f }, + { 0x5801, 0x16 }, + { 0x5802, 0x0e }, + { 0x5803, 0x0d }, + { 0x5804, 0x17 }, + { 0x5805, 0x3f }, + { 0x5806, 0x0b }, + { 0x5807, 0x06 }, + { 0x5808, 0x04 }, + { 0x5809, 0x04 }, + { 0x580a, 0x06 }, + { 0x580b, 0x0b }, + { 0x580c, 0x09 }, + { 0x580d, 0x03 }, + { 0x580e, 0x00 }, + { 0x580f, 0x00 }, + { 0x5810, 0x03 }, + { 0x5811, 0x08 }, + { 0x5812, 0x0a }, + { 0x5813, 0x03 }, + { 0x5814, 0x00 }, + { 0x5815, 0x00 }, + { 0x5816, 0x04 }, + { 0x5817, 0x09 }, + { 0x5818, 0x0f }, + { 0x5819, 0x08 }, + { 0x581a, 0x06 }, + { 0x581b, 0x06 }, + { 0x581c, 0x08 }, + { 0x581d, 0x0c }, + { 0x581e, 0x3f }, + { 0x581f, 0x1e }, + { 0x5820, 0x12 }, + { 0x5821, 0x13 }, + { 0x5822, 0x21 }, + { 0x5823, 0x3f }, + { 0x5824, 0x68 }, + { 0x5825, 0x28 }, + { 0x5826, 0x2c }, + { 0x5827, 0x28 }, + { 0x5828, 0x08 }, + { 0x5829, 0x48 }, + { 0x582a, 0x64 }, + { 0x582b, 0x62 }, + { 0x582c, 0x64 }, + { 0x582d, 0x28 }, + { 0x582e, 0x46 }, + { 0x582f, 0x62 }, + { 0x5830, 0x60 }, + { 0x5831, 0x62 }, + { 0x5832, 0x26 }, + { 0x5833, 0x48 }, + { 0x5834, 0x66 }, + { 0x5835, 0x44 }, + { 0x5836, 0x64 }, + { 0x5837, 0x28 }, + { 0x5838, 0x66 }, + { 0x5839, 0x48 }, + { 0x583a, 0x2c }, + { 0x583b, 0x28 }, + { 0x583c, 0x26 }, + { 0x583d, 0xae }, + { 0x5025, 0x00 }, + { 0x3a0f, 0x30 }, + { 0x3a10, 0x28 }, + { 0x3a1b, 0x30 }, + { 0x3a1e, 0x26 }, + { 0x3a11, 0x60 }, + { 0x3a1f, 0x14 }, + { 0x0601, 0x02 }, + { 0x3008, 0x42 }, + { 0x3008, 0x02 } +}; + +static const struct reg_value ov5645_setting_sxga[] = { + { 0x3612, 0xa9 }, + { 0x3614, 0x50 }, + { 0x3618, 0x00 }, + { 0x3034, 0x18 }, + { 0x3035, 0x21 }, + { 0x3036, 0x70 }, + { 0x3600, 0x09 }, + { 0x3601, 0x43 }, + { 0x3708, 0x66 }, + { 0x370c, 0xc3 }, + { 0x3800, 0x00 }, + { 0x3801, 0x00 }, + { 0x3802, 0x00 }, + { 0x3803, 0x06 }, + { 0x3804, 0x0a }, + { 0x3805, 0x3f }, + { 0x3806, 0x07 }, + { 0x3807, 0x9d }, + { 0x3808, 0x05 }, + { 0x3809, 0x00 }, + { 0x380a, 0x03 }, + { 0x380b, 0xc0 }, + { 0x380c, 0x07 }, + { 0x380d, 0x68 }, + { 0x380e, 0x03 }, + { 0x380f, 0xd8 }, + { 0x3813, 0x06 }, + { 0x3814, 0x31 }, + { 0x3815, 0x31 }, + { 0x3820, 0x47 }, + { 0x3a02, 0x03 }, + { 0x3a03, 0xd8 }, + { 0x3a08, 0x01 }, + { 0x3a09, 0xf8 }, + { 0x3a0a, 0x01 }, + { 0x3a0b, 0xa4 }, + { 0x3a0e, 0x02 }, + { 0x3a0d, 0x02 }, + { 0x3a14, 0x03 }, + { 0x3a15, 0xd8 }, + { 0x3a18, 0x00 }, + { 0x4004, 0x02 }, + { 0x4005, 0x18 }, + { 0x4300, 0x32 }, + { 0x4202, 0x00 } +}; + +static const struct reg_value ov5645_setting_1080p[] = { + { 0x3612, 0xab }, + { 0x3614, 0x50 }, + { 0x3618, 0x04 }, + { 0x3034, 0x18 }, + { 0x3035, 0x11 }, + { 0x3036, 0x54 }, + { 0x3600, 0x08 }, + { 0x3601, 0x33 }, + { 0x3708, 0x63 }, + { 0x370c, 0xc0 }, + { 0x3800, 0x01 }, + { 0x3801, 0x50 }, + { 0x3802, 0x01 }, + { 0x3803, 0xb2 }, + { 0x3804, 0x08 }, + { 0x3805, 0xef }, + { 0x3806, 0x05 }, + { 0x3807, 0xf1 }, + { 0x3808, 0x07 }, + { 0x3809, 0x80 }, + { 0x380a, 0x04 }, + { 0x380b, 0x38 }, + { 0x380c, 0x09 }, + { 0x380d, 0xc4 }, + { 0x380e, 0x04 }, + { 0x380f, 0x60 }, + { 0x3813, 0x04 }, + { 0x3814, 0x11 }, + { 0x3815, 0x11 }, + { 0x3820, 0x47 }, + { 0x4514, 0x88 }, + { 0x3a02, 0x04 }, + { 0x3a03, 0x60 }, + { 0x3a08, 0x01 }, + { 0x3a09, 0x50 }, + { 0x3a0a, 0x01 }, + { 0x3a0b, 0x18 }, + { 0x3a0e, 0x03 }, + { 0x3a0d, 0x04 }, + { 0x3a14, 0x04 }, + { 0x3a15, 0x60 }, + { 0x3a18, 0x00 }, + { 0x4004, 0x06 }, + { 0x4005, 0x18 }, + { 0x4300, 0x32 }, + { 0x4202, 0x00 }, + { 0x4837, 0x0b } +}; + +static const struct reg_value ov5645_setting_full[] = { + { 0x3612, 0xab }, + { 0x3614, 0x50 }, + { 0x3618, 0x04 }, + { 0x3034, 0x18 }, + { 0x3035, 0x11 }, + { 0x3036, 0x54 }, + { 0x3600, 0x08 }, + { 0x3601, 0x33 }, + { 0x3708, 0x63 }, + { 0x370c, 0xc0 }, + { 0x3800, 0x00 }, + { 0x3801, 0x00 }, + { 0x3802, 0x00 }, + { 0x3803, 0x00 }, + { 0x3804, 0x0a }, + { 0x3805, 0x3f }, + { 0x3806, 0x07 }, + { 0x3807, 0x9f }, + { 0x3808, 0x0a }, + { 0x3809, 0x20 }, + { 0x380a, 0x07 }, + { 0x380b, 0x98 }, + { 0x380c, 0x0b }, + { 0x380d, 0x1c }, + { 0x380e, 0x07 }, + { 0x380f, 0xb0 }, + { 0x3813, 0x06 }, + { 0x3814, 0x11 }, + { 0x3815, 0x11 }, + { 0x3820, 0x47 }, + { 0x4514, 0x88 }, + { 0x3a02, 0x07 }, + { 0x3a03, 0xb0 }, + { 0x3a08, 0x01 }, + { 0x3a09, 0x27 }, + { 0x3a0a, 0x00 }, + { 0x3a0b, 0xf6 }, + { 0x3a0e, 0x06 }, + { 0x3a0d, 0x08 }, + { 0x3a14, 0x07 }, + { 0x3a15, 0xb0 }, + { 0x3a18, 0x01 }, + { 0x4004, 0x06 }, + { 0x4005, 0x18 }, + { 0x4300, 0x32 }, + { 0x4837, 0x0b }, + { 0x4202, 0x00 } +}; + +static const struct ov5645_mode_info ov5645_mode_info_data[] = { + { + .width = 1280, + .height = 960, + .data = ov5645_setting_sxga, + .data_size = ARRAY_SIZE(ov5645_setting_sxga) + }, + { + .width = 1920, + .height = 1080, + .data = ov5645_setting_1080p, + .data_size = ARRAY_SIZE(ov5645_setting_1080p) + }, + { + .width = 2592, + .height = 1944, + .data = ov5645_setting_full, + .data_size = ARRAY_SIZE(ov5645_setting_full) + }, +}; + +static int ov5645_regulators_enable(struct ov5645 *ov5645) +{ + int ret; + + ret = regulator_enable(ov5645->io_regulator); + if (ret < 0) { + dev_err(ov5645->dev, "set io voltage failed\n"); + return ret; + } + + ret = regulator_enable(ov5645->analog_regulator); + if (ret) { + dev_err(ov5645->dev, "set analog voltage failed\n"); + goto err_disable_io; + } + + ret = regulator_enable(ov5645->core_regulator); + if (ret) { + dev_err(ov5645->dev, "set core voltage failed\n"); + goto err_disable_analog; + } + + return 0; + +err_disable_analog: + regulator_disable(ov5645->analog_regulator); +err_disable_io: + regulator_disable(ov5645->io_regulator); + + return ret; +} + +static void ov5645_regulators_disable(struct ov5645 *ov5645) +{ + int ret; + + ret = regulator_disable(ov5645->core_regulator); + if (ret < 0) + dev_err(ov5645->dev, "core regulator disable failed\n"); + + ret = regulator_disable(ov5645->analog_regulator); + if (ret < 0) + dev_err(ov5645->dev, "analog regulator disable failed\n"); + + ret = regulator_disable(ov5645->io_regulator); + if (ret < 0) + dev_err(ov5645->dev, "io regulator disable failed\n"); +} + +static int ov5645_write_reg(struct ov5645 *ov5645, u16 reg, u8 val) +{ + u8 regbuf[3]; + int ret; + + regbuf[0] = reg >> 8; + regbuf[1] = reg & 0xff; + regbuf[2] = val; + + ret = i2c_master_send(ov5645->i2c_client, regbuf, 3); + if (ret < 0) + dev_err(ov5645->dev, "%s: write reg error %d: reg=%x, val=%x\n", + __func__, ret, reg, val); + + return ret; +} + +static int ov5645_read_reg(struct ov5645 *ov5645, u16 reg, u8 *val) +{ + u8 regbuf[2]; + int ret; + + regbuf[0] = reg >> 8; + regbuf[1] = reg & 0xff; + + ret = i2c_master_send(ov5645->i2c_client, regbuf, 2); + if (ret < 0) { + dev_err(ov5645->dev, "%s: write reg error %d: reg=%x\n", + __func__, ret, reg); + return ret; + } + + ret = i2c_master_recv(ov5645->i2c_client, val, 1); + if (ret < 0) { + dev_err(ov5645->dev, "%s: read reg error %d: reg=%x\n", + __func__, ret, reg); + return ret; + } + + return 0; +} + +static int ov5645_set_aec_mode(struct ov5645 *ov5645, u32 mode) +{ + u8 val = ov5645->aec_pk_manual; + int ret; + + if (mode == V4L2_EXPOSURE_AUTO) + val &= ~OV5645_AEC_MANUAL_ENABLE; + else /* V4L2_EXPOSURE_MANUAL */ + val |= OV5645_AEC_MANUAL_ENABLE; + + ret = ov5645_write_reg(ov5645, OV5645_AEC_PK_MANUAL, val); + if (!ret) + ov5645->aec_pk_manual = val; + + return ret; +} + +static int ov5645_set_agc_mode(struct ov5645 *ov5645, u32 enable) +{ + u8 val = ov5645->aec_pk_manual; + int ret; + + if (enable) + val &= ~OV5645_AGC_MANUAL_ENABLE; + else + val |= OV5645_AGC_MANUAL_ENABLE; + + ret = ov5645_write_reg(ov5645, OV5645_AEC_PK_MANUAL, val); + if (!ret) + ov5645->aec_pk_manual = val; + + return ret; +} + +static int ov5645_set_register_array(struct ov5645 *ov5645, + const struct reg_value *settings, + unsigned int num_settings) +{ + unsigned int i; + int ret; + + for (i = 0; i < num_settings; ++i, ++settings) { + ret = ov5645_write_reg(ov5645, settings->reg, settings->val); + if (ret < 0) + return ret; + } + + return 0; +} + +static int ov5645_set_power_on(struct ov5645 *ov5645) +{ + int ret; + + ret = ov5645_regulators_enable(ov5645); + if (ret < 0) { + return ret; + } + + ret = clk_prepare_enable(ov5645->xclk); + if (ret < 0) { + dev_err(ov5645->dev, "clk prepare enable failed\n"); + ov5645_regulators_disable(ov5645); + return ret; + } + + usleep_range(5000, 15000); + gpiod_set_value_cansleep(ov5645->enable_gpio, 1); + + usleep_range(1000, 2000); + gpiod_set_value_cansleep(ov5645->rst_gpio, 0); + + msleep(20); + + return 0; +} + +static void ov5645_set_power_off(struct ov5645 *ov5645) +{ + gpiod_set_value_cansleep(ov5645->rst_gpio, 1); + gpiod_set_value_cansleep(ov5645->enable_gpio, 0); + clk_disable_unprepare(ov5645->xclk); + ov5645_regulators_disable(ov5645); +} + +static int ov5645_s_power(struct v4l2_subdev *sd, int on) +{ + struct ov5645 *ov5645 = to_ov5645(sd); + int ret = 0; + + mutex_lock(&ov5645->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (ov5645->power_count == !on) { + if (on) { + ret = ov5645_set_power_on(ov5645); + if (ret < 0) + goto exit; + + ret = ov5645_set_register_array(ov5645, + ov5645_global_init_setting, + ARRAY_SIZE(ov5645_global_init_setting)); + if (ret < 0) { + dev_err(ov5645->dev, + "could not set init registers\n"); + ov5645_set_power_off(ov5645); + goto exit; + } + + ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, + OV5645_SYSTEM_CTRL0_STOP); + if (ret < 0) { + ov5645_set_power_off(ov5645); + goto exit; + } + } else { + ov5645_set_power_off(ov5645); + } + } + + /* Update the power count. */ + ov5645->power_count += on ? 1 : -1; + WARN_ON(ov5645->power_count < 0); + +exit: + mutex_unlock(&ov5645->power_lock); + + return ret; +} + +static int ov5645_set_saturation(struct ov5645 *ov5645, s32 value) +{ + u32 reg_value = (value * 0x10) + 0x40; + int ret; + + ret = ov5645_write_reg(ov5645, OV5645_SDE_SAT_U, reg_value); + if (ret < 0) + return ret; + + return ov5645_write_reg(ov5645, OV5645_SDE_SAT_V, reg_value); +} + +static int ov5645_set_hflip(struct ov5645 *ov5645, s32 value) +{ + u8 val = ov5645->timing_tc_reg21; + int ret; + + if (value == 0) + val &= ~(OV5645_SENSOR_MIRROR); + else + val |= (OV5645_SENSOR_MIRROR); + + ret = ov5645_write_reg(ov5645, OV5645_TIMING_TC_REG21, val); + if (!ret) + ov5645->timing_tc_reg21 = val; + + return ret; +} + +static int ov5645_set_vflip(struct ov5645 *ov5645, s32 value) +{ + u8 val = ov5645->timing_tc_reg20; + int ret; + + if (value == 0) + val |= (OV5645_SENSOR_VFLIP | OV5645_ISP_VFLIP); + else + val &= ~(OV5645_SENSOR_VFLIP | OV5645_ISP_VFLIP); + + ret = ov5645_write_reg(ov5645, OV5645_TIMING_TC_REG20, val); + if (!ret) + ov5645->timing_tc_reg20 = val; + + return ret; +} + +static int ov5645_set_test_pattern(struct ov5645 *ov5645, s32 value) +{ + u8 val = 0; + + if (value) { + val = OV5645_SET_TEST_PATTERN(value - 1); + val |= OV5645_TEST_PATTERN_ENABLE; + } + + return ov5645_write_reg(ov5645, OV5645_PRE_ISP_TEST_SETTING_1, val); +} + +static const char * const ov5645_test_pattern_menu[] = { + "Disabled", + "Vertical Color Bars", + "Pseudo-Random Data", + "Color Square", + "Black Image", +}; + +static int ov5645_set_awb(struct ov5645 *ov5645, s32 enable_auto) +{ + u8 val = 0; + + if (!enable_auto) + val = OV5645_AWB_MANUAL_ENABLE; + + return ov5645_write_reg(ov5645, OV5645_AWB_MANUAL_CONTROL, val); +} + +static int ov5645_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ov5645 *ov5645 = container_of(ctrl->handler, + struct ov5645, ctrls); + int ret; + + mutex_lock(&ov5645->power_lock); + if (!ov5645->power_count) { + mutex_unlock(&ov5645->power_lock); + return 0; + } + + switch (ctrl->id) { + case V4L2_CID_SATURATION: + ret = ov5645_set_saturation(ov5645, ctrl->val); + break; + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = ov5645_set_awb(ov5645, ctrl->val); + break; + case V4L2_CID_AUTOGAIN: + ret = ov5645_set_agc_mode(ov5645, ctrl->val); + break; + case V4L2_CID_EXPOSURE_AUTO: + ret = ov5645_set_aec_mode(ov5645, ctrl->val); + break; + case V4L2_CID_TEST_PATTERN: + ret = ov5645_set_test_pattern(ov5645, ctrl->val); + break; + case V4L2_CID_HFLIP: + ret = ov5645_set_hflip(ov5645, ctrl->val); + break; + case V4L2_CID_VFLIP: + ret = ov5645_set_vflip(ov5645, ctrl->val); + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&ov5645->power_lock); + + return ret; +} + +static struct v4l2_ctrl_ops ov5645_ctrl_ops = { + .s_ctrl = ov5645_s_ctrl, +}; + +static int ov5645_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index > 0) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_UYVY8_2X8; + + return 0; +} + +static int ov5645_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->code != MEDIA_BUS_FMT_UYVY8_2X8) + return -EINVAL; + + if (fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) + return -EINVAL; + + fse->min_width = ov5645_mode_info_data[fse->index].width; + fse->max_width = ov5645_mode_info_data[fse->index].width; + fse->min_height = ov5645_mode_info_data[fse->index].height; + fse->max_height = ov5645_mode_info_data[fse->index].height; + + return 0; +} + +static struct v4l2_mbus_framefmt * +__ov5645_get_pad_format(struct ov5645 *ov5645, + struct v4l2_subdev_pad_config *cfg, + unsigned int pad, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(&ov5645->sd, cfg, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &ov5645->fmt; + default: + return NULL; + } +} + +static int ov5645_get_format(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct ov5645 *ov5645 = to_ov5645(sd); + + format->format = *__ov5645_get_pad_format(ov5645, cfg, format->pad, + format->which); + return 0; +} + +static struct v4l2_rect * +__ov5645_get_pad_crop(struct ov5645 *ov5645, struct v4l2_subdev_pad_config *cfg, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(&ov5645->sd, cfg, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &ov5645->crop; + default: + return NULL; + } +} + +static const struct ov5645_mode_info * +ov5645_find_nearest_mode(unsigned int width, unsigned int height) +{ + int i; + + for (i = ARRAY_SIZE(ov5645_mode_info_data) - 1; i >= 0; i--) { + if (ov5645_mode_info_data[i].width <= width && + ov5645_mode_info_data[i].height <= height) + break; + } + + if (i < 0) + i = 0; + + return &ov5645_mode_info_data[i]; +} + +static int ov5645_set_format(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct ov5645 *ov5645 = to_ov5645(sd); + struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *__crop; + const struct ov5645_mode_info *new_mode; + + __crop = __ov5645_get_pad_crop(ov5645, cfg, format->pad, + format->which); + + new_mode = ov5645_find_nearest_mode(format->format.width, + format->format.height); + __crop->width = new_mode->width; + __crop->height = new_mode->height; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) + ov5645->current_mode = new_mode; + + __format = __ov5645_get_pad_format(ov5645, cfg, format->pad, + format->which); + __format->width = __crop->width; + __format->height = __crop->height; + __format->code = MEDIA_BUS_FMT_UYVY8_2X8; + __format->field = V4L2_FIELD_NONE; + __format->colorspace = V4L2_COLORSPACE_SRGB; + + format->format = *__format; + + return 0; +} + +static int ov5645_entity_init_cfg(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg) +{ + struct v4l2_subdev_format fmt = { 0 }; + + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + fmt.format.width = 1920; + fmt.format.height = 1080; + + ov5645_set_format(subdev, cfg, &fmt); + + return 0; +} + +static int ov5645_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_selection *sel) +{ + struct ov5645 *ov5645 = to_ov5645(sd); + + if (sel->target != V4L2_SEL_TGT_CROP) + return -EINVAL; + + sel->r = *__ov5645_get_pad_crop(ov5645, cfg, sel->pad, + sel->which); + return 0; +} + +static int ov5645_s_stream(struct v4l2_subdev *subdev, int enable) +{ + struct ov5645 *ov5645 = to_ov5645(subdev); + int ret; + + if (enable) { + ret = ov5645_set_register_array(ov5645, + ov5645->current_mode->data, + ov5645->current_mode->data_size); + if (ret < 0) { + dev_err(ov5645->dev, "could not set mode %dx%d\n", + ov5645->current_mode->width, + ov5645->current_mode->height); + return ret; + } + ret = v4l2_ctrl_handler_setup(&ov5645->ctrls); + if (ret < 0) { + dev_err(ov5645->dev, "could not sync v4l2 controls\n"); + return ret; + } + ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, + OV5645_SYSTEM_CTRL0_START); + if (ret < 0) + return ret; + } else { + ret = ov5645_write_reg(ov5645, OV5645_SYSTEM_CTRL0, + OV5645_SYSTEM_CTRL0_STOP); + if (ret < 0) + return ret; + } + + return 0; +} + +static const struct v4l2_subdev_core_ops ov5645_core_ops = { + .s_power = ov5645_s_power, +}; + +static const struct v4l2_subdev_video_ops ov5645_video_ops = { + .s_stream = ov5645_s_stream, +}; + +static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { + .init_cfg = ov5645_entity_init_cfg, + .enum_mbus_code = ov5645_enum_mbus_code, + .enum_frame_size = ov5645_enum_frame_size, + .get_fmt = ov5645_get_format, + .set_fmt = ov5645_set_format, + .get_selection = ov5645_get_selection, +}; + +static const struct v4l2_subdev_ops ov5645_subdev_ops = { + .core = &ov5645_core_ops, + .video = &ov5645_video_ops, + .pad = &ov5645_subdev_pad_ops, +}; + +static int ov5645_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device_node *endpoint; + struct ov5645 *ov5645; + u8 chip_id_high, chip_id_low; + u32 xclk_freq; + int ret; + + ov5645 = devm_kzalloc(dev, sizeof(struct ov5645), GFP_KERNEL); + if (!ov5645) + return -ENOMEM; + + ov5645->i2c_client = client; + ov5645->dev = dev; + + endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); + if (!endpoint) { + dev_err(dev, "endpoint node not found\n"); + return -EINVAL; + } + + ret = v4l2_of_parse_endpoint(endpoint, &ov5645->ep); + if (ret < 0) { + dev_err(dev, "parsing endpoint node failed\n"); + return ret; + } + + of_node_put(endpoint); + + if (ov5645->ep.bus_type != V4L2_MBUS_CSI2) { + dev_err(dev, "invalid bus type, must be CSI2\n"); + return -EINVAL; + } + + /* get system clock (xclk) */ + ov5645->xclk = devm_clk_get(dev, "xclk"); + if (IS_ERR(ov5645->xclk)) { + dev_err(dev, "could not get xclk"); + return PTR_ERR(ov5645->xclk); + } + + ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq); + if (ret) { + dev_err(dev, "could not get xclk frequency\n"); + return ret; + } + + if (xclk_freq != 23880000) { + dev_err(dev, "external clock frequency %u is not supported\n", + xclk_freq); + return -EINVAL; + } + + ret = clk_set_rate(ov5645->xclk, xclk_freq); + if (ret) { + dev_err(dev, "could not set xclk frequency\n"); + return ret; + } + + ov5645->io_regulator = devm_regulator_get(dev, "vdddo"); + if (IS_ERR(ov5645->io_regulator)) { + dev_err(dev, "cannot get io regulator\n"); + return PTR_ERR(ov5645->io_regulator); + } + + ret = regulator_set_voltage(ov5645->io_regulator, + OV5645_VOLTAGE_DIGITAL_IO, + OV5645_VOLTAGE_DIGITAL_IO); + if (ret < 0) { + dev_err(dev, "cannot set io voltage\n"); + return ret; + } + + ov5645->core_regulator = devm_regulator_get(dev, "vddd"); + if (IS_ERR(ov5645->core_regulator)) { + dev_err(dev, "cannot get core regulator\n"); + return PTR_ERR(ov5645->core_regulator); + } + + ret = regulator_set_voltage(ov5645->core_regulator, + OV5645_VOLTAGE_DIGITAL_CORE, + OV5645_VOLTAGE_DIGITAL_CORE); + if (ret < 0) { + dev_err(dev, "cannot set core voltage\n"); + return ret; + } + + ov5645->analog_regulator = devm_regulator_get(dev, "vdda"); + if (IS_ERR(ov5645->analog_regulator)) { + dev_err(dev, "cannot get analog regulator\n"); + return PTR_ERR(ov5645->analog_regulator); + } + + ret = regulator_set_voltage(ov5645->analog_regulator, + OV5645_VOLTAGE_ANALOG, + OV5645_VOLTAGE_ANALOG); + if (ret < 0) { + dev_err(dev, "cannot set analog voltage\n"); + return ret; + } + + ov5645->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(ov5645->enable_gpio)) { + dev_err(dev, "cannot get enable gpio\n"); + return PTR_ERR(ov5645->enable_gpio); + } + + ov5645->rst_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ov5645->rst_gpio)) { + dev_err(dev, "cannot get reset gpio\n"); + return PTR_ERR(ov5645->rst_gpio); + } + + mutex_init(&ov5645->power_lock); + + v4l2_ctrl_handler_init(&ov5645->ctrls, 7); + v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, + V4L2_CID_SATURATION, -4, 4, 1, 0); + v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + v4l2_ctrl_new_std(&ov5645->ctrls, &ov5645_ctrl_ops, + V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); + v4l2_ctrl_new_std_menu(&ov5645->ctrls, &ov5645_ctrl_ops, + V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, + 0, V4L2_EXPOSURE_AUTO); + v4l2_ctrl_new_std_menu_items(&ov5645->ctrls, &ov5645_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(ov5645_test_pattern_menu) - 1, + 0, 0, ov5645_test_pattern_menu); + + ov5645->sd.ctrl_handler = &ov5645->ctrls; + + if (ov5645->ctrls.error) { + dev_err(dev, "%s: control initialization error %d\n", + __func__, ov5645->ctrls.error); + ret = ov5645->ctrls.error; + goto free_ctrl; + } + + v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); + ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; + ov5645->sd.dev = &client->dev; + + ret = media_entity_pads_init(&ov5645->sd.entity, 1, &ov5645->pad); + if (ret < 0) { + dev_err(dev, "could not register media entity\n"); + goto free_ctrl; + } + + ret = ov5645_s_power(&ov5645->sd, true); + if (ret < 0) { + dev_err(dev, "could not power up OV5645\n"); + goto free_entity; + } + + ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_HIGH, &chip_id_high); + if (ret < 0 || chip_id_high != OV5645_CHIP_ID_HIGH_BYTE) { + dev_err(dev, "could not read ID high\n"); + ret = -ENODEV; + goto power_down; + } + ret = ov5645_read_reg(ov5645, OV5645_CHIP_ID_LOW, &chip_id_low); + if (ret < 0 || chip_id_low != OV5645_CHIP_ID_LOW_BYTE) { + dev_err(dev, "could not read ID low\n"); + ret = -ENODEV; + goto power_down; + } + + dev_info(dev, "OV5645 detected at address 0x%02x\n", client->addr); + + ret = ov5645_read_reg(ov5645, OV5645_AEC_PK_MANUAL, + &ov5645->aec_pk_manual); + if (ret < 0) { + dev_err(dev, "could not read AEC/AGC mode\n"); + ret = -ENODEV; + goto power_down; + } + + ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG20, + &ov5645->timing_tc_reg20); + if (ret < 0) { + dev_err(dev, "could not read vflip value\n"); + ret = -ENODEV; + goto power_down; + } + + ret = ov5645_read_reg(ov5645, OV5645_TIMING_TC_REG21, + &ov5645->timing_tc_reg21); + if (ret < 0) { + dev_err(dev, "could not read hflip value\n"); + ret = -ENODEV; + goto power_down; + } + + ov5645_s_power(&ov5645->sd, false); + + ret = v4l2_async_register_subdev(&ov5645->sd); + if (ret < 0) { + dev_err(dev, "could not register v4l2 device\n"); + goto free_entity; + } + + ov5645_entity_init_cfg(&ov5645->sd, NULL); + + return 0; + +power_down: + ov5645_s_power(&ov5645->sd, false); +free_entity: + media_entity_cleanup(&ov5645->sd.entity); +free_ctrl: + v4l2_ctrl_handler_free(&ov5645->ctrls); + mutex_destroy(&ov5645->power_lock); + + return ret; +} + +static int ov5645_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov5645 *ov5645 = to_ov5645(sd); + + v4l2_async_unregister_subdev(&ov5645->sd); + media_entity_cleanup(&ov5645->sd.entity); + v4l2_ctrl_handler_free(&ov5645->ctrls); + mutex_destroy(&ov5645->power_lock); + + return 0; +} + +static const struct i2c_device_id ov5645_id[] = { + { "ov5645", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ov5645_id); + +static const struct of_device_id ov5645_of_match[] = { + { .compatible = "ovti,ov5645" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ov5645_of_match); + +static struct i2c_driver ov5645_i2c_driver = { + .driver = { + .of_match_table = of_match_ptr(ov5645_of_match), + .name = "ov5645", + }, + .probe = ov5645_probe, + .remove = ov5645_remove, + .id_table = ov5645_id, +}; + +module_i2c_driver(ov5645_i2c_driver); + +MODULE_DESCRIPTION("Omnivision OV5645 Camera Driver"); +MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c new file mode 100644 index 000000000000..f57a0b354cf6 --- /dev/null +++ b/drivers/media/i2c/ov5647.c @@ -0,0 +1,634 @@ +/* + * A V4L2 driver for OmniVision OV5647 cameras. + * + * Based on Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor driver + * Copyright (C) 2011 Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * Based on Omnivision OV7670 Camera Driver + * Copyright (C) 2006-7 Jonathan Corbet <corbet@lwn.net> + * + * Copyright (C) 2016, Synopsys, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-image-sizes.h> +#include <media/v4l2-mediabus.h> +#include <media/v4l2-of.h> + +#define SENSOR_NAME "ov5647" + +#define OV5647_SW_RESET 0x0103 +#define OV5647_REG_CHIPID_H 0x300A +#define OV5647_REG_CHIPID_L 0x300B + +#define REG_TERM 0xfffe +#define VAL_TERM 0xfe +#define REG_DLY 0xffff + +#define OV5647_ROW_START 0x01 +#define OV5647_ROW_START_MIN 0 +#define OV5647_ROW_START_MAX 2004 +#define OV5647_ROW_START_DEF 54 + +#define OV5647_COLUMN_START 0x02 +#define OV5647_COLUMN_START_MIN 0 +#define OV5647_COLUMN_START_MAX 2750 +#define OV5647_COLUMN_START_DEF 16 + +#define OV5647_WINDOW_HEIGHT 0x03 +#define OV5647_WINDOW_HEIGHT_MIN 2 +#define OV5647_WINDOW_HEIGHT_MAX 2006 +#define OV5647_WINDOW_HEIGHT_DEF 1944 + +#define OV5647_WINDOW_WIDTH 0x04 +#define OV5647_WINDOW_WIDTH_MIN 2 +#define OV5647_WINDOW_WIDTH_MAX 2752 +#define OV5647_WINDOW_WIDTH_DEF 2592 + +struct regval_list { + u16 addr; + u8 data; +}; + +struct ov5647 { + struct v4l2_subdev sd; + struct media_pad pad; + struct mutex lock; + struct v4l2_mbus_framefmt format; + unsigned int width; + unsigned int height; + int power_count; + struct clk *xclk; +}; + +static inline struct ov5647 *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ov5647, sd); +} + +static struct regval_list sensor_oe_disable_regs[] = { + {0x3000, 0x00}, + {0x3001, 0x00}, + {0x3002, 0x00}, +}; + +static struct regval_list sensor_oe_enable_regs[] = { + {0x3000, 0x0f}, + {0x3001, 0xff}, + {0x3002, 0xe4}, +}; + +static struct regval_list ov5647_640x480[] = { + {0x0100, 0x00}, + {0x0103, 0x01}, + {0x3034, 0x08}, + {0x3035, 0x21}, + {0x3036, 0x46}, + {0x303c, 0x11}, + {0x3106, 0xf5}, + {0x3821, 0x07}, + {0x3820, 0x41}, + {0x3827, 0xec}, + {0x370c, 0x0f}, + {0x3612, 0x59}, + {0x3618, 0x00}, + {0x5000, 0x06}, + {0x5001, 0x01}, + {0x5002, 0x41}, + {0x5003, 0x08}, + {0x5a00, 0x08}, + {0x3000, 0x00}, + {0x3001, 0x00}, + {0x3002, 0x00}, + {0x3016, 0x08}, + {0x3017, 0xe0}, + {0x3018, 0x44}, + {0x301c, 0xf8}, + {0x301d, 0xf0}, + {0x3a18, 0x00}, + {0x3a19, 0xf8}, + {0x3c01, 0x80}, + {0x3b07, 0x0c}, + {0x380c, 0x07}, + {0x380d, 0x68}, + {0x380e, 0x03}, + {0x380f, 0xd8}, + {0x3814, 0x31}, + {0x3815, 0x31}, + {0x3708, 0x64}, + {0x3709, 0x52}, + {0x3808, 0x02}, + {0x3809, 0x80}, + {0x380a, 0x01}, + {0x380b, 0xE0}, + {0x3801, 0x00}, + {0x3802, 0x00}, + {0x3803, 0x00}, + {0x3804, 0x0a}, + {0x3805, 0x3f}, + {0x3806, 0x07}, + {0x3807, 0xa1}, + {0x3811, 0x08}, + {0x3813, 0x02}, + {0x3630, 0x2e}, + {0x3632, 0xe2}, + {0x3633, 0x23}, + {0x3634, 0x44}, + {0x3636, 0x06}, + {0x3620, 0x64}, + {0x3621, 0xe0}, + {0x3600, 0x37}, + {0x3704, 0xa0}, + {0x3703, 0x5a}, + {0x3715, 0x78}, + {0x3717, 0x01}, + {0x3731, 0x02}, + {0x370b, 0x60}, + {0x3705, 0x1a}, + {0x3f05, 0x02}, + {0x3f06, 0x10}, + {0x3f01, 0x0a}, + {0x3a08, 0x01}, + {0x3a09, 0x27}, + {0x3a0a, 0x00}, + {0x3a0b, 0xf6}, + {0x3a0d, 0x04}, + {0x3a0e, 0x03}, + {0x3a0f, 0x58}, + {0x3a10, 0x50}, + {0x3a1b, 0x58}, + {0x3a1e, 0x50}, + {0x3a11, 0x60}, + {0x3a1f, 0x28}, + {0x4001, 0x02}, + {0x4004, 0x02}, + {0x4000, 0x09}, + {0x4837, 0x24}, + {0x4050, 0x6e}, + {0x4051, 0x8f}, + {0x0100, 0x01}, +}; + +static int ov5647_write(struct v4l2_subdev *sd, u16 reg, u8 val) +{ + int ret; + unsigned char data[3] = { reg >> 8, reg & 0xff, val}; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + ret = i2c_master_send(client, data, 3); + if (ret < 0) + dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n", + __func__, reg); + + return ret; +} + +static int ov5647_read(struct v4l2_subdev *sd, u16 reg, u8 *val) +{ + int ret; + unsigned char data_w[2] = { reg >> 8, reg & 0xff }; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + ret = i2c_master_send(client, data_w, 2); + if (ret < 0) { + dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n", + __func__, reg); + return ret; + } + + ret = i2c_master_recv(client, val, 1); + if (ret < 0) + dev_dbg(&client->dev, "%s: i2c read error, reg: %x\n", + __func__, reg); + + return ret; +} + +static int ov5647_write_array(struct v4l2_subdev *sd, + struct regval_list *regs, int array_size) +{ + int i, ret; + + for (i = 0; i < array_size; i++) { + ret = ov5647_write(sd, regs[i].addr, regs[i].data); + if (ret < 0) + return ret; + } + + return 0; +} + +static int ov5647_set_virtual_channel(struct v4l2_subdev *sd, int channel) +{ + u8 channel_id; + int ret; + + ret = ov5647_read(sd, 0x4814, &channel_id); + if (ret < 0) + return ret; + + channel_id &= ~(3 << 6); + return ov5647_write(sd, 0x4814, channel_id | (channel << 6)); +} + +static int ov5647_stream_on(struct v4l2_subdev *sd) +{ + int ret; + + ret = ov5647_write(sd, 0x4202, 0x00); + if (ret < 0) + return ret; + + return ov5647_write(sd, 0x300D, 0x00); +} + +static int ov5647_stream_off(struct v4l2_subdev *sd) +{ + int ret; + + ret = ov5647_write(sd, 0x4202, 0x0f); + if (ret < 0) + return ret; + + return ov5647_write(sd, 0x300D, 0x01); +} + +static int set_sw_standby(struct v4l2_subdev *sd, bool standby) +{ + int ret; + u8 rdval; + + ret = ov5647_read(sd, 0x0100, &rdval); + if (ret < 0) + return ret; + + if (standby) + rdval &= ~0x01; + else + rdval |= 0x01; + + return ov5647_write(sd, 0x0100, rdval); +} + +static int __sensor_init(struct v4l2_subdev *sd) +{ + int ret; + u8 resetval, rdval; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + ret = ov5647_read(sd, 0x0100, &rdval); + if (ret < 0) + return ret; + + ret = ov5647_write_array(sd, ov5647_640x480, + ARRAY_SIZE(ov5647_640x480)); + if (ret < 0) { + dev_err(&client->dev, "write sensor default regs error\n"); + return ret; + } + + ret = ov5647_set_virtual_channel(sd, 0); + if (ret < 0) + return ret; + + ret = ov5647_read(sd, 0x0100, &resetval); + if (ret < 0) + return ret; + + if (!(resetval & 0x01)) { + dev_err(&client->dev, "Device was in SW standby"); + ret = ov5647_write(sd, 0x0100, 0x01); + if (ret < 0) + return ret; + } + + return ov5647_write(sd, 0x4800, 0x04); +} + +static int ov5647_sensor_power(struct v4l2_subdev *sd, int on) +{ + int ret = 0; + struct ov5647 *ov5647 = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + mutex_lock(&ov5647->lock); + + if (on && !ov5647->power_count) { + dev_dbg(&client->dev, "OV5647 power on\n"); + + ret = clk_prepare_enable(ov5647->xclk); + if (ret < 0) { + dev_err(&client->dev, "clk prepare enable failed\n"); + goto out; + } + + ret = ov5647_write_array(sd, sensor_oe_enable_regs, + ARRAY_SIZE(sensor_oe_enable_regs)); + if (ret < 0) { + clk_disable_unprepare(ov5647->xclk); + dev_err(&client->dev, + "write sensor_oe_enable_regs error\n"); + goto out; + } + + ret = __sensor_init(sd); + if (ret < 0) { + clk_disable_unprepare(ov5647->xclk); + dev_err(&client->dev, + "Camera not available, check Power\n"); + goto out; + } + } else if (!on && ov5647->power_count == 1) { + dev_dbg(&client->dev, "OV5647 power off\n"); + + ret = ov5647_write_array(sd, sensor_oe_disable_regs, + ARRAY_SIZE(sensor_oe_disable_regs)); + + if (ret < 0) + dev_dbg(&client->dev, "disable oe failed\n"); + + ret = set_sw_standby(sd, true); + + if (ret < 0) + dev_dbg(&client->dev, "soft stby failed\n"); + + clk_disable_unprepare(ov5647->xclk); + } + + /* Update the power count. */ + ov5647->power_count += on ? 1 : -1; + WARN_ON(ov5647->power_count < 0); + +out: + mutex_unlock(&ov5647->lock); + + return ret; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov5647_sensor_get_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + u8 val; + int ret; + + ret = ov5647_read(sd, reg->reg & 0xff, &val); + if (ret < 0) + return ret; + + reg->val = val; + reg->size = 1; + + return 0; +} + +static int ov5647_sensor_set_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + return ov5647_write(sd, reg->reg & 0xff, reg->val & 0xff); +} +#endif + +/** + * @short Subdev core operations registration + */ +static const struct v4l2_subdev_core_ops ov5647_subdev_core_ops = { + .s_power = ov5647_sensor_power, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov5647_sensor_get_register, + .s_register = ov5647_sensor_set_register, +#endif +}; + +static int ov5647_s_stream(struct v4l2_subdev *sd, int enable) +{ + if (enable) + return ov5647_stream_on(sd); + else + return ov5647_stream_off(sd); +} + +static const struct v4l2_subdev_video_ops ov5647_subdev_video_ops = { + .s_stream = ov5647_s_stream, +}; + +static int ov5647_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index > 0) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_SBGGR8_1X8; + + return 0; +} + +static const struct v4l2_subdev_pad_ops ov5647_subdev_pad_ops = { + .enum_mbus_code = ov5647_enum_mbus_code, +}; + +static const struct v4l2_subdev_ops ov5647_subdev_ops = { + .core = &ov5647_subdev_core_ops, + .video = &ov5647_subdev_video_ops, + .pad = &ov5647_subdev_pad_ops, +}; + +static int ov5647_detect(struct v4l2_subdev *sd) +{ + u8 read; + int ret; + struct i2c_client *client = v4l2_get_subdevdata(sd); + + ret = ov5647_write(sd, OV5647_SW_RESET, 0x01); + if (ret < 0) + return ret; + + ret = ov5647_read(sd, OV5647_REG_CHIPID_H, &read); + if (ret < 0) + return ret; + + if (read != 0x56) { + dev_err(&client->dev, "ID High expected 0x56 got %x", read); + return -ENODEV; + } + + ret = ov5647_read(sd, OV5647_REG_CHIPID_L, &read); + if (ret < 0) + return ret; + + if (read != 0x47) { + dev_err(&client->dev, "ID Low expected 0x47 got %x", read); + return -ENODEV; + } + + return ov5647_write(sd, OV5647_SW_RESET, 0x00); +} + +static int ov5647_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format = + v4l2_subdev_get_try_format(sd, fh->pad, 0); + struct v4l2_rect *crop = + v4l2_subdev_get_try_crop(sd, fh->pad, 0); + + crop->left = OV5647_COLUMN_START_DEF; + crop->top = OV5647_ROW_START_DEF; + crop->width = OV5647_WINDOW_WIDTH_DEF; + crop->height = OV5647_WINDOW_HEIGHT_DEF; + + format->code = MEDIA_BUS_FMT_SBGGR8_1X8; + + format->width = OV5647_WINDOW_WIDTH_DEF; + format->height = OV5647_WINDOW_HEIGHT_DEF; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static const struct v4l2_subdev_internal_ops ov5647_subdev_internal_ops = { + .open = ov5647_open, +}; + +static int ov5647_parse_dt(struct device_node *np) +{ + struct v4l2_of_endpoint bus_cfg; + struct device_node *ep; + + int ret; + + ep = of_graph_get_next_endpoint(np, NULL); + if (!ep) + return -EINVAL; + + ret = v4l2_of_parse_endpoint(ep, &bus_cfg); + + of_node_put(ep); + return ret; +} + +static int ov5647_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ov5647 *sensor; + int ret; + struct v4l2_subdev *sd; + struct device_node *np = client->dev.of_node; + u32 xclk_freq; + + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + if (IS_ENABLED(CONFIG_OF) && np) { + ret = ov5647_parse_dt(np); + if (ret) { + dev_err(dev, "DT parsing error: %d\n", ret); + return ret; + } + } + + /* get system clock (xclk) */ + sensor->xclk = devm_clk_get(dev, NULL); + if (IS_ERR(sensor->xclk)) { + dev_err(dev, "could not get xclk"); + return PTR_ERR(sensor->xclk); + } + + xclk_freq = clk_get_rate(sensor->xclk); + if (xclk_freq != 25000000) { + dev_err(dev, "Unsupported clock frequency: %u\n", xclk_freq); + return -EINVAL; + } + + mutex_init(&sensor->lock); + + sd = &sensor->sd; + v4l2_i2c_subdev_init(sd, client, &ov5647_subdev_ops); + sensor->sd.internal_ops = &ov5647_subdev_internal_ops; + sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&sd->entity, 1, &sensor->pad); + if (ret < 0) + goto mutex_remove; + + ret = ov5647_detect(sd); + if (ret < 0) + goto error; + + ret = v4l2_async_register_subdev(sd); + if (ret < 0) + goto error; + + dev_dbg(dev, "OmniVision OV5647 camera driver probed\n"); + return 0; +error: + media_entity_cleanup(&sd->entity); +mutex_remove: + mutex_destroy(&sensor->lock); + return ret; +} + +static int ov5647_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov5647 *ov5647 = to_state(sd); + + v4l2_async_unregister_subdev(&ov5647->sd); + media_entity_cleanup(&ov5647->sd.entity); + v4l2_device_unregister_subdev(sd); + mutex_destroy(&ov5647->lock); + + return 0; +} + +static const struct i2c_device_id ov5647_id[] = { + { "ov5647", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov5647_id); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id ov5647_of_match[] = { + { .compatible = "ovti,ov5647" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ov5647_of_match); +#endif + +static struct i2c_driver ov5647_driver = { + .driver = { + .of_match_table = of_match_ptr(ov5647_of_match), + .name = SENSOR_NAME, + }, + .probe = ov5647_probe, + .remove = ov5647_remove, + .id_table = ov5647_id, +}; + +module_i2c_driver(ov5647_driver); + +MODULE_AUTHOR("Ramiro Oliveira <roliveir@synopsys.com>"); +MODULE_DESCRIPTION("A low-level driver for OmniVision ov5647 sensors"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c index 56cfb5ca9c95..7270c68ed18a 100644 --- a/drivers/media/i2c/ov7670.c +++ b/drivers/media/i2c/ov7670.c @@ -10,12 +10,15 @@ * This file may be distributed under the terms of the GNU General * Public License, version 2. */ +#include <linux/clk.h> #include <linux/init.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/i2c.h> #include <linux/delay.h> #include <linux/videodev2.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <media/v4l2-device.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-mediabus.h> @@ -227,6 +230,9 @@ struct ov7670_info { struct v4l2_ctrl *hue; }; struct ov7670_format_struct *fmt; /* Current format */ + struct clk *clk; + struct gpio_desc *resetb_gpio; + struct gpio_desc *pwdn_gpio; int min_width; /* Filter out smaller sizes */ int min_height; /* Filter out smaller sizes */ int clock_speed; /* External clock speed (MHz) */ @@ -589,8 +595,6 @@ static int ov7670_init(struct v4l2_subdev *sd, u32 val) return ov7670_write_array(sd, ov7670_default_regs); } - - static int ov7670_detect(struct v4l2_subdev *sd) { unsigned char v; @@ -1046,7 +1050,6 @@ static int ov7670_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - memset(cp, 0, sizeof(struct v4l2_captureparm)); cp->capability = V4L2_CAP_TIMEPERFRAME; info->devtype->get_framerate(sd, &cp->timeperframe); @@ -1061,9 +1064,8 @@ static int ov7670_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - if (cp->extendedmode != 0) - return -EINVAL; + cp->capability = V4L2_CAP_TIMEPERFRAME; return info->devtype->set_framerate(sd, tpf); } @@ -1549,6 +1551,27 @@ static const struct ov7670_devtype ov7670_devdata[] = { }, }; +static int ov7670_init_gpio(struct i2c_client *client, struct ov7670_info *info) +{ + info->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown", + GPIOD_OUT_LOW); + if (IS_ERR(info->pwdn_gpio)) { + dev_info(&client->dev, "can't get %s GPIO\n", "powerdown"); + return PTR_ERR(info->pwdn_gpio); + } + + info->resetb_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(info->resetb_gpio)) { + dev_info(&client->dev, "can't get %s GPIO\n", "reset"); + return PTR_ERR(info->resetb_gpio); + } + + usleep_range(3000, 5000); + + return 0; +} + static int ov7670_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1589,13 +1612,28 @@ static int ov7670_probe(struct i2c_client *client, info->pclk_hb_disable = true; } + info->clk = devm_clk_get(&client->dev, "xclk"); + if (IS_ERR(info->clk)) + return -EPROBE_DEFER; + clk_prepare_enable(info->clk); + + ret = ov7670_init_gpio(client, info); + if (ret) + goto clk_disable; + + info->clock_speed = clk_get_rate(info->clk) / 1000000; + if (info->clock_speed < 10 || info->clock_speed > 48) { + ret = -EINVAL; + goto clk_disable; + } + /* Make sure it's an ov7670 */ ret = ov7670_detect(sd); if (ret) { v4l_dbg(1, debug, client, "chip found @ 0x%x (%s) is not an ov7670 chip.\n", client->addr << 1, client->adapter->name); - return ret; + goto clk_disable; } v4l_info(client, "chip found @ 0x%02x (%s)\n", client->addr << 1, client->adapter->name); @@ -1636,10 +1674,9 @@ static int ov7670_probe(struct i2c_client *client, V4L2_EXPOSURE_AUTO); sd->ctrl_handler = &info->hdl; if (info->hdl.error) { - int err = info->hdl.error; + ret = info->hdl.error; - v4l2_ctrl_handler_free(&info->hdl); - return err; + goto hdl_free; } /* * We have checked empirically that hw allows to read back the gain @@ -1651,7 +1688,17 @@ static int ov7670_probe(struct i2c_client *client, v4l2_ctrl_cluster(2, &info->saturation); v4l2_ctrl_handler_setup(&info->hdl); + ret = v4l2_async_register_subdev(&info->sd); + if (ret < 0) + goto hdl_free; + return 0; + +hdl_free: + v4l2_ctrl_handler_free(&info->hdl); +clk_disable: + clk_disable_unprepare(info->clk); + return ret; } @@ -1662,6 +1709,7 @@ static int ov7670_remove(struct i2c_client *client) v4l2_device_unregister_subdev(sd); v4l2_ctrl_handler_free(&info->hdl); + clk_disable_unprepare(info->clk); return 0; } @@ -1672,9 +1720,18 @@ static const struct i2c_device_id ov7670_id[] = { }; MODULE_DEVICE_TABLE(i2c, ov7670_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id ov7670_of_match[] = { + { .compatible = "ovti,ov7670", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, ov7670_of_match); +#endif + static struct i2c_driver ov7670_driver = { .driver = { .name = "ov7670", + .of_match_table = of_match_ptr(ov7670_of_match), }, .probe = ov7670_probe, .remove = ov7670_remove, diff --git a/drivers/media/i2c/soc_camera/Kconfig b/drivers/media/i2c/soc_camera/Kconfig index 7704bcf5cc25..96859f37cb1c 100644 --- a/drivers/media/i2c/soc_camera/Kconfig +++ b/drivers/media/i2c/soc_camera/Kconfig @@ -41,12 +41,6 @@ config SOC_CAMERA_MT9V022 help This driver supports MT9V022 cameras from Micron -config SOC_CAMERA_OV2640 - tristate "ov2640 camera support" - depends on SOC_CAMERA && I2C - help - This is a ov2640 camera driver - config SOC_CAMERA_OV5642 tristate "ov5642 camera support" depends on SOC_CAMERA && I2C diff --git a/drivers/media/i2c/soc_camera/Makefile b/drivers/media/i2c/soc_camera/Makefile index 6f994f9353a0..974bdb721dbe 100644 --- a/drivers/media/i2c/soc_camera/Makefile +++ b/drivers/media/i2c/soc_camera/Makefile @@ -3,7 +3,6 @@ obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o obj-$(CONFIG_SOC_CAMERA_MT9T112) += mt9t112.o obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o -obj-$(CONFIG_SOC_CAMERA_OV2640) += ov2640.o obj-$(CONFIG_SOC_CAMERA_OV5642) += ov5642.o obj-$(CONFIG_SOC_CAMERA_OV6650) += ov6650.o obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o diff --git a/drivers/media/i2c/soc_camera/imx074.c b/drivers/media/i2c/soc_camera/imx074.c index 05b55cfe8147..77f1e0243d6e 100644 --- a/drivers/media/i2c/soc_camera/imx074.c +++ b/drivers/media/i2c/soc_camera/imx074.c @@ -180,7 +180,7 @@ static int imx074_set_fmt(struct v4l2_subdev *sd, mf->field = V4L2_FIELD_NONE; if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) - priv->fmt = imx074_find_datafmt(mf->code); + priv->fmt = fmt; else cfg->try_fmt = *mf; @@ -271,12 +271,12 @@ static int imx074_g_mbus_config(struct v4l2_subdev *sd, return 0; } -static struct v4l2_subdev_video_ops imx074_subdev_video_ops = { +static const struct v4l2_subdev_video_ops imx074_subdev_video_ops = { .s_stream = imx074_s_stream, .g_mbus_config = imx074_g_mbus_config, }; -static struct v4l2_subdev_core_ops imx074_subdev_core_ops = { +static const struct v4l2_subdev_core_ops imx074_subdev_core_ops = { .s_power = imx074_s_power, }; @@ -287,7 +287,7 @@ static const struct v4l2_subdev_pad_ops imx074_subdev_pad_ops = { .set_fmt = imx074_set_fmt, }; -static struct v4l2_subdev_ops imx074_subdev_ops = { +static const struct v4l2_subdev_ops imx074_subdev_ops = { .core = &imx074_subdev_core_ops, .video = &imx074_subdev_video_ops, .pad = &imx074_subdev_pad_ops, diff --git a/drivers/media/i2c/soc_camera/mt9m001.c b/drivers/media/i2c/soc_camera/mt9m001.c index 3d6378d4491c..1bfb0d53059e 100644 --- a/drivers/media/i2c/soc_camera/mt9m001.c +++ b/drivers/media/i2c/soc_camera/mt9m001.c @@ -278,6 +278,7 @@ static int mt9m001_get_fmt(struct v4l2_subdev *sd, } static int mt9m001_s_fmt(struct v4l2_subdev *sd, + const struct mt9m001_datafmt *fmt, struct v4l2_mbus_framefmt *mf) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -297,9 +298,8 @@ static int mt9m001_s_fmt(struct v4l2_subdev *sd, if (!ret) { mf->width = mt9m001->rect.width; mf->height = mt9m001->rect.height; - mt9m001->fmt = mt9m001_find_datafmt(mf->code, - mt9m001->fmts, mt9m001->num_fmts); - mf->colorspace = mt9m001->fmt->colorspace; + mt9m001->fmt = fmt; + mf->colorspace = fmt->colorspace; } return ret; @@ -335,7 +335,7 @@ static int mt9m001_set_fmt(struct v4l2_subdev *sd, mf->colorspace = fmt->colorspace; if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) - return mt9m001_s_fmt(sd, mf); + return mt9m001_s_fmt(sd, fmt, mf); cfg->try_fmt = *mf; return 0; } @@ -574,7 +574,7 @@ static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = { .s_ctrl = mt9m001_s_ctrl, }; -static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { +static const struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9m001_g_register, .s_register = mt9m001_s_register, @@ -630,7 +630,7 @@ static int mt9m001_s_mbus_config(struct v4l2_subdev *sd, return bps == 10 ? 0 : -EINVAL; } -static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { +static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { .s_stream = mt9m001_s_stream, .g_mbus_config = mt9m001_g_mbus_config, .s_mbus_config = mt9m001_s_mbus_config, @@ -648,7 +648,7 @@ static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = { .set_fmt = mt9m001_set_fmt, }; -static struct v4l2_subdev_ops mt9m001_subdev_ops = { +static const struct v4l2_subdev_ops mt9m001_subdev_ops = { .core = &mt9m001_subdev_core_ops, .video = &mt9m001_subdev_video_ops, .sensor = &mt9m001_subdev_sensor_ops, diff --git a/drivers/media/i2c/soc_camera/mt9t031.c b/drivers/media/i2c/soc_camera/mt9t031.c index 3aa5569065ad..714fb3555b34 100644 --- a/drivers/media/i2c/soc_camera/mt9t031.c +++ b/drivers/media/i2c/soc_camera/mt9t031.c @@ -679,7 +679,7 @@ static const struct v4l2_ctrl_ops mt9t031_ctrl_ops = { .s_ctrl = mt9t031_s_ctrl, }; -static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = { +static const struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = { .s_power = mt9t031_s_power, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9t031_g_register, @@ -726,7 +726,7 @@ static int mt9t031_s_mbus_config(struct v4l2_subdev *sd, return reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000); } -static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = { +static const struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = { .s_stream = mt9t031_s_stream, .g_mbus_config = mt9t031_g_mbus_config, .s_mbus_config = mt9t031_s_mbus_config, @@ -744,7 +744,7 @@ static const struct v4l2_subdev_pad_ops mt9t031_subdev_pad_ops = { .set_fmt = mt9t031_set_fmt, }; -static struct v4l2_subdev_ops mt9t031_subdev_ops = { +static const struct v4l2_subdev_ops mt9t031_subdev_ops = { .core = &mt9t031_subdev_core_ops, .video = &mt9t031_subdev_video_ops, .sensor = &mt9t031_subdev_sensor_ops, diff --git a/drivers/media/i2c/soc_camera/mt9t112.c b/drivers/media/i2c/soc_camera/mt9t112.c index 2ef22241ec14..297d22ebcb18 100644 --- a/drivers/media/i2c/soc_camera/mt9t112.c +++ b/drivers/media/i2c/soc_camera/mt9t112.c @@ -773,7 +773,7 @@ static int mt9t112_s_power(struct v4l2_subdev *sd, int on) return soc_camera_set_power(&client->dev, ssdd, priv->clk, on); } -static struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = { +static const struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9t112_g_register, .s_register = mt9t112_s_register, @@ -1031,7 +1031,7 @@ static int mt9t112_s_mbus_config(struct v4l2_subdev *sd, return 0; } -static struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = { +static const struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = { .s_stream = mt9t112_s_stream, .g_mbus_config = mt9t112_g_mbus_config, .s_mbus_config = mt9t112_s_mbus_config, @@ -1048,7 +1048,7 @@ static const struct v4l2_subdev_pad_ops mt9t112_subdev_pad_ops = { /************************************************************************ i2c driver ************************************************************************/ -static struct v4l2_subdev_ops mt9t112_subdev_ops = { +static const struct v4l2_subdev_ops mt9t112_subdev_ops = { .core = &mt9t112_subdev_core_ops, .video = &mt9t112_subdev_video_ops, .pad = &mt9t112_subdev_pad_ops, diff --git a/drivers/media/i2c/soc_camera/mt9v022.c b/drivers/media/i2c/soc_camera/mt9v022.c index 6a14ab5e4f2d..762f06919329 100644 --- a/drivers/media/i2c/soc_camera/mt9v022.c +++ b/drivers/media/i2c/soc_camera/mt9v022.c @@ -403,6 +403,7 @@ static int mt9v022_get_fmt(struct v4l2_subdev *sd, } static int mt9v022_s_fmt(struct v4l2_subdev *sd, + const struct mt9v022_datafmt *fmt, struct v4l2_mbus_framefmt *mf) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -441,9 +442,8 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, if (!ret) { mf->width = mt9v022->rect.width; mf->height = mt9v022->rect.height; - mt9v022->fmt = mt9v022_find_datafmt(mf->code, - mt9v022->fmts, mt9v022->num_fmts); - mf->colorspace = mt9v022->fmt->colorspace; + mt9v022->fmt = fmt; + mf->colorspace = fmt->colorspace; } return ret; @@ -478,7 +478,7 @@ static int mt9v022_set_fmt(struct v4l2_subdev *sd, mf->colorspace = fmt->colorspace; if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) - return mt9v022_s_fmt(sd, mf); + return mt9v022_s_fmt(sd, fmt, mf); cfg->try_fmt = *mf; return 0; } @@ -770,7 +770,7 @@ static const struct v4l2_ctrl_ops mt9v022_ctrl_ops = { .s_ctrl = mt9v022_s_ctrl, }; -static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = { +static const struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9v022_g_register, .s_register = mt9v022_s_register, @@ -858,7 +858,7 @@ static int mt9v022_s_mbus_config(struct v4l2_subdev *sd, return 0; } -static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = { +static const struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = { .s_stream = mt9v022_s_stream, .g_mbus_config = mt9v022_g_mbus_config, .s_mbus_config = mt9v022_s_mbus_config, @@ -876,7 +876,7 @@ static const struct v4l2_subdev_pad_ops mt9v022_subdev_pad_ops = { .set_fmt = mt9v022_set_fmt, }; -static struct v4l2_subdev_ops mt9v022_subdev_ops = { +static const struct v4l2_subdev_ops mt9v022_subdev_ops = { .core = &mt9v022_subdev_core_ops, .video = &mt9v022_subdev_video_ops, .sensor = &mt9v022_subdev_sensor_ops, diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c index 3d185bd622a3..39f420db9c70 100644 --- a/drivers/media/i2c/soc_camera/ov5642.c +++ b/drivers/media/i2c/soc_camera/ov5642.c @@ -811,7 +811,7 @@ static int ov5642_set_fmt(struct v4l2_subdev *sd, mf->field = V4L2_FIELD_NONE; if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) - priv->fmt = ov5642_find_datafmt(mf->code); + priv->fmt = fmt; else cfg->try_fmt = *mf; return 0; @@ -943,7 +943,7 @@ static int ov5642_s_power(struct v4l2_subdev *sd, int on) return ret; } -static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = { +static const struct v4l2_subdev_video_ops ov5642_subdev_video_ops = { .g_mbus_config = ov5642_g_mbus_config, }; @@ -955,7 +955,7 @@ static const struct v4l2_subdev_pad_ops ov5642_subdev_pad_ops = { .set_fmt = ov5642_set_fmt, }; -static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = { +static const struct v4l2_subdev_core_ops ov5642_subdev_core_ops = { .s_power = ov5642_s_power, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov5642_get_register, @@ -963,7 +963,7 @@ static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = { #endif }; -static struct v4l2_subdev_ops ov5642_subdev_ops = { +static const struct v4l2_subdev_ops ov5642_subdev_ops = { .core = &ov5642_subdev_core_ops, .video = &ov5642_subdev_video_ops, .pad = &ov5642_subdev_pad_ops, @@ -1063,9 +1063,18 @@ static const struct i2c_device_id ov5642_id[] = { }; MODULE_DEVICE_TABLE(i2c, ov5642_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id ov5642_of_match[] = { + { .compatible = "ovti,ov5642" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ov5642_of_match); +#endif + static struct i2c_driver ov5642_i2c_driver = { .driver = { .name = "ov5642", + .of_match_table = of_match_ptr(ov5642_of_match), }, .probe = ov5642_probe, .remove = ov5642_remove, diff --git a/drivers/media/i2c/soc_camera/ov6650.c b/drivers/media/i2c/soc_camera/ov6650.c index 4bf2995e1cb8..dbd6d92c589f 100644 --- a/drivers/media/i2c/soc_camera/ov6650.c +++ b/drivers/media/i2c/soc_camera/ov6650.c @@ -885,7 +885,7 @@ static const struct v4l2_ctrl_ops ov6550_ctrl_ops = { .s_ctrl = ov6550_s_ctrl, }; -static struct v4l2_subdev_core_ops ov6650_core_ops = { +static const struct v4l2_subdev_core_ops ov6650_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov6650_get_register, .s_register = ov6650_set_register, @@ -942,7 +942,7 @@ static int ov6650_s_mbus_config(struct v4l2_subdev *sd, return ret; } -static struct v4l2_subdev_video_ops ov6650_video_ops = { +static const struct v4l2_subdev_video_ops ov6650_video_ops = { .s_stream = ov6650_s_stream, .g_parm = ov6650_g_parm, .s_parm = ov6650_s_parm, @@ -958,7 +958,7 @@ static const struct v4l2_subdev_pad_ops ov6650_pad_ops = { .set_fmt = ov6650_set_fmt, }; -static struct v4l2_subdev_ops ov6650_subdev_ops = { +static const struct v4l2_subdev_ops ov6650_subdev_ops = { .core = &ov6650_core_ops, .video = &ov6650_video_ops, .pad = &ov6650_pad_ops, @@ -1033,7 +1033,7 @@ static int ov6650_probe(struct i2c_client *client, priv->code = MEDIA_BUS_FMT_YUYV8_2X8; priv->colorspace = V4L2_COLORSPACE_JPEG; - priv->clk = v4l2_clk_get(&client->dev, "mclk"); + priv->clk = v4l2_clk_get(&client->dev, NULL); if (IS_ERR(priv->clk)) { ret = PTR_ERR(priv->clk); goto eclkget; diff --git a/drivers/media/i2c/soc_camera/ov772x.c b/drivers/media/i2c/soc_camera/ov772x.c index 985a3672b243..0f7b9d1b9c57 100644 --- a/drivers/media/i2c/soc_camera/ov772x.c +++ b/drivers/media/i2c/soc_camera/ov772x.c @@ -894,38 +894,15 @@ static int ov772x_get_fmt(struct v4l2_subdev *sd, return 0; } -static int ov772x_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) -{ - struct ov772x_priv *priv = to_ov772x(sd); - const struct ov772x_color_format *cfmt; - const struct ov772x_win_size *win; - int ret; - - ov772x_select_params(mf, &cfmt, &win); - - ret = ov772x_set_params(priv, cfmt, win); - if (ret < 0) - return ret; - - priv->win = win; - priv->cfmt = cfmt; - - mf->code = cfmt->code; - mf->width = win->rect.width; - mf->height = win->rect.height; - mf->field = V4L2_FIELD_NONE; - mf->colorspace = cfmt->colorspace; - - return 0; -} - static int ov772x_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *format) { + struct ov772x_priv *priv = to_ov772x(sd); struct v4l2_mbus_framefmt *mf = &format->format; const struct ov772x_color_format *cfmt; const struct ov772x_win_size *win; + int ret; if (format->pad) return -EINVAL; @@ -938,9 +915,17 @@ static int ov772x_set_fmt(struct v4l2_subdev *sd, mf->field = V4L2_FIELD_NONE; mf->colorspace = cfmt->colorspace; - if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) - return ov772x_s_fmt(sd, mf); - cfg->try_fmt = *mf; + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + cfg->try_fmt = *mf; + return 0; + } + + ret = ov772x_set_params(priv, cfmt, win); + if (ret < 0) + return ret; + + priv->win = win; + priv->cfmt = cfmt; return 0; } @@ -993,7 +978,7 @@ static const struct v4l2_ctrl_ops ov772x_ctrl_ops = { .s_ctrl = ov772x_s_ctrl, }; -static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = { +static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov772x_g_register, .s_register = ov772x_s_register, @@ -1027,7 +1012,7 @@ static int ov772x_g_mbus_config(struct v4l2_subdev *sd, return 0; } -static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = { +static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = { .s_stream = ov772x_s_stream, .g_mbus_config = ov772x_g_mbus_config, }; @@ -1039,7 +1024,7 @@ static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = { .set_fmt = ov772x_set_fmt, }; -static struct v4l2_subdev_ops ov772x_subdev_ops = { +static const struct v4l2_subdev_ops ov772x_subdev_ops = { .core = &ov772x_subdev_core_ops, .video = &ov772x_subdev_video_ops, .pad = &ov772x_subdev_pad_ops, diff --git a/drivers/media/i2c/soc_camera/ov9640.c b/drivers/media/i2c/soc_camera/ov9640.c index 65085a235128..0146d1f7aacb 100644 --- a/drivers/media/i2c/soc_camera/ov9640.c +++ b/drivers/media/i2c/soc_camera/ov9640.c @@ -486,11 +486,8 @@ static int ov9640_s_fmt(struct v4l2_subdev *sd, { struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov9640_reg_alt alts = {0}; - enum v4l2_colorspace cspace; - u32 code = mf->code; int ret; - ov9640_res_roundup(&mf->width, &mf->height); ov9640_alter_regs(mf->code, &alts); ov9640_reset(client); @@ -499,24 +496,7 @@ static int ov9640_s_fmt(struct v4l2_subdev *sd, if (ret) return ret; - switch (code) { - case MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE: - case MEDIA_BUS_FMT_RGB565_2X8_LE: - cspace = V4L2_COLORSPACE_SRGB; - break; - default: - code = MEDIA_BUS_FMT_UYVY8_2X8; - case MEDIA_BUS_FMT_UYVY8_2X8: - cspace = V4L2_COLORSPACE_JPEG; - } - - ret = ov9640_write_regs(client, mf->width, code, &alts); - if (!ret) { - mf->code = code; - mf->colorspace = cspace; - } - - return ret; + return ov9640_write_regs(client, mf->width, mf->code, &alts); } static int ov9640_set_fmt(struct v4l2_subdev *sd, @@ -539,8 +519,10 @@ static int ov9640_set_fmt(struct v4l2_subdev *sd, break; default: mf->code = MEDIA_BUS_FMT_UYVY8_2X8; + /* fall through */ case MEDIA_BUS_FMT_UYVY8_2X8: mf->colorspace = V4L2_COLORSPACE_JPEG; + break; } if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) @@ -637,7 +619,7 @@ static const struct v4l2_ctrl_ops ov9640_ctrl_ops = { .s_ctrl = ov9640_s_ctrl, }; -static struct v4l2_subdev_core_ops ov9640_core_ops = { +static const struct v4l2_subdev_core_ops ov9640_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov9640_get_register, .s_register = ov9640_set_register, @@ -661,7 +643,7 @@ static int ov9640_g_mbus_config(struct v4l2_subdev *sd, return 0; } -static struct v4l2_subdev_video_ops ov9640_video_ops = { +static const struct v4l2_subdev_video_ops ov9640_video_ops = { .s_stream = ov9640_s_stream, .g_mbus_config = ov9640_g_mbus_config, }; @@ -672,7 +654,7 @@ static const struct v4l2_subdev_pad_ops ov9640_pad_ops = { .set_fmt = ov9640_set_fmt, }; -static struct v4l2_subdev_ops ov9640_subdev_ops = { +static const struct v4l2_subdev_ops ov9640_subdev_ops = { .core = &ov9640_core_ops, .video = &ov9640_video_ops, .pad = &ov9640_pad_ops, diff --git a/drivers/media/i2c/soc_camera/ov9740.c b/drivers/media/i2c/soc_camera/ov9740.c index f11f76cdacad..cc07b7ae5407 100644 --- a/drivers/media/i2c/soc_camera/ov9740.c +++ b/drivers/media/i2c/soc_camera/ov9740.c @@ -673,20 +673,8 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd, { struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov9740_priv *priv = to_ov9740(sd); - enum v4l2_colorspace cspace; - u32 code = mf->code; int ret; - ov9740_res_roundup(&mf->width, &mf->height); - - switch (code) { - case MEDIA_BUS_FMT_YUYV8_2X8: - cspace = V4L2_COLORSPACE_SRGB; - break; - default: - return -EINVAL; - } - ret = ov9740_reg_write_array(client, ov9740_defaults, ARRAY_SIZE(ov9740_defaults)); if (ret < 0) @@ -696,11 +684,7 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd, if (ret < 0) return ret; - mf->code = code; - mf->colorspace = cspace; - - memcpy(&priv->current_mf, mf, sizeof(struct v4l2_mbus_framefmt)); - + priv->current_mf = *mf; return ret; } @@ -907,12 +891,12 @@ static int ov9740_g_mbus_config(struct v4l2_subdev *sd, return 0; } -static struct v4l2_subdev_video_ops ov9740_video_ops = { +static const struct v4l2_subdev_video_ops ov9740_video_ops = { .s_stream = ov9740_s_stream, .g_mbus_config = ov9740_g_mbus_config, }; -static struct v4l2_subdev_core_ops ov9740_core_ops = { +static const struct v4l2_subdev_core_ops ov9740_core_ops = { .s_power = ov9740_s_power, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov9740_get_register, @@ -926,7 +910,7 @@ static const struct v4l2_subdev_pad_ops ov9740_pad_ops = { .set_fmt = ov9740_set_fmt, }; -static struct v4l2_subdev_ops ov9740_subdev_ops = { +static const struct v4l2_subdev_ops ov9740_subdev_ops = { .core = &ov9740_core_ops, .video = &ov9740_video_ops, .pad = &ov9740_pad_ops, diff --git a/drivers/media/i2c/soc_camera/rj54n1cb0c.c b/drivers/media/i2c/soc_camera/rj54n1cb0c.c index bc8ec59a3fbd..02398d0bc649 100644 --- a/drivers/media/i2c/soc_camera/rj54n1cb0c.c +++ b/drivers/media/i2c/soc_camera/rj54n1cb0c.c @@ -1213,7 +1213,7 @@ static const struct v4l2_ctrl_ops rj54n1_ctrl_ops = { .s_ctrl = rj54n1_s_ctrl, }; -static struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = { +static const struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = rj54n1_g_register, .s_register = rj54n1_s_register, @@ -1251,7 +1251,7 @@ static int rj54n1_s_mbus_config(struct v4l2_subdev *sd, return reg_write(client, RJ54N1_OUT_SIGPO, 0); } -static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = { +static const struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = { .s_stream = rj54n1_s_stream, .g_mbus_config = rj54n1_g_mbus_config, .s_mbus_config = rj54n1_s_mbus_config, @@ -1265,7 +1265,7 @@ static const struct v4l2_subdev_pad_ops rj54n1_subdev_pad_ops = { .set_fmt = rj54n1_set_fmt, }; -static struct v4l2_subdev_ops rj54n1_subdev_ops = { +static const struct v4l2_subdev_ops rj54n1_subdev_ops = { .core = &rj54n1_subdev_core_ops, .video = &rj54n1_subdev_video_ops, .pad = &rj54n1_subdev_pad_ops, diff --git a/drivers/media/i2c/soc_camera/tw9910.c b/drivers/media/i2c/soc_camera/tw9910.c index c9c49ed707b8..bdb5e0a431e9 100644 --- a/drivers/media/i2c/soc_camera/tw9910.c +++ b/drivers/media/i2c/soc_camera/tw9910.c @@ -837,7 +837,7 @@ done: return ret; } -static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { +static const struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = tw9910_g_register, .s_register = tw9910_s_register, @@ -901,7 +901,7 @@ static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm) return 0; } -static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { +static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { .s_std = tw9910_s_std, .g_std = tw9910_g_std, .s_stream = tw9910_s_stream, @@ -917,7 +917,7 @@ static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = { .set_fmt = tw9910_set_fmt, }; -static struct v4l2_subdev_ops tw9910_subdev_ops = { +static const struct v4l2_subdev_ops tw9910_subdev_ops = { .core = &tw9910_subdev_core_ops, .video = &tw9910_subdev_video_ops, .pad = &tw9910_subdev_pad_ops, diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index f569a05fe105..acef4eca269f 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -194,57 +194,61 @@ static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) } } -static u8 i2c_rd8(struct v4l2_subdev *sd, u16 reg) +static noinline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n) { - u8 val; + __le32 val = 0; + + i2c_rd(sd, reg, (u8 __force *)&val, n); - i2c_rd(sd, reg, &val, 1); + return le32_to_cpu(val); +} + +static noinline void i2c_wrreg(struct v4l2_subdev *sd, u16 reg, u32 val, u32 n) +{ + __le32 raw = cpu_to_le32(val); - return val; + i2c_wr(sd, reg, (u8 __force *)&raw, n); +} + +static u8 i2c_rd8(struct v4l2_subdev *sd, u16 reg) +{ + return i2c_rdreg(sd, reg, 1); } static void i2c_wr8(struct v4l2_subdev *sd, u16 reg, u8 val) { - i2c_wr(sd, reg, &val, 1); + i2c_wrreg(sd, reg, val, 1); } static void i2c_wr8_and_or(struct v4l2_subdev *sd, u16 reg, u8 mask, u8 val) { - i2c_wr8(sd, reg, (i2c_rd8(sd, reg) & mask) | val); + i2c_wrreg(sd, reg, (i2c_rdreg(sd, reg, 2) & mask) | val, 2); } static u16 i2c_rd16(struct v4l2_subdev *sd, u16 reg) { - u16 val; - - i2c_rd(sd, reg, (u8 *)&val, 2); - - return val; + return i2c_rdreg(sd, reg, 2); } static void i2c_wr16(struct v4l2_subdev *sd, u16 reg, u16 val) { - i2c_wr(sd, reg, (u8 *)&val, 2); + i2c_wrreg(sd, reg, val, 2); } static void i2c_wr16_and_or(struct v4l2_subdev *sd, u16 reg, u16 mask, u16 val) { - i2c_wr16(sd, reg, (i2c_rd16(sd, reg) & mask) | val); + i2c_wrreg(sd, reg, (i2c_rdreg(sd, reg, 2) & mask) | val, 2); } static u32 i2c_rd32(struct v4l2_subdev *sd, u16 reg) { - u32 val; - - i2c_rd(sd, reg, (u8 *)&val, 4); - - return val; + return i2c_rdreg(sd, reg, 4); } static void i2c_wr32(struct v4l2_subdev *sd, u16 reg, u32 val) { - i2c_wr(sd, reg, (u8 *)&val, 4); + i2c_wrreg(sd, reg, val, 4); } /* --------------- STATUS --------------- */ @@ -1227,7 +1231,7 @@ static int tc358743_g_register(struct v4l2_subdev *sd, reg->size = tc358743_get_reg_size(reg->reg); - i2c_rd(sd, reg->reg, (u8 *)®->val, reg->size); + reg->val = i2c_rdreg(sd, reg->reg, reg->size); return 0; } @@ -1253,7 +1257,7 @@ static int tc358743_s_register(struct v4l2_subdev *sd, reg->reg == BCAPS) return 0; - i2c_wr(sd, (u16)reg->reg, (u8 *)®->val, + i2c_wrreg(sd, (u16)reg->reg, reg->val, tc358743_get_reg_size(reg->reg)); return 0; @@ -1459,6 +1463,10 @@ static int tc358743_g_mbus_config(struct v4l2_subdev *sd, static int tc358743_s_stream(struct v4l2_subdev *sd, int enable) { enable_stream(sd, enable); + if (!enable) { + /* Put all lanes in PL-11 state (STOPSTATE) */ + tc358743_set_csi(sd); + } return 0; } @@ -1951,9 +1959,18 @@ static struct i2c_device_id tc358743_id[] = { MODULE_DEVICE_TABLE(i2c, tc358743_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tc358743_of_match[] = { + { .compatible = "toshiba,tc358743" }, + {}, +}; +MODULE_DEVICE_TABLE(of, tc358743_of_match); +#endif + static struct i2c_driver tc358743_driver = { .driver = { .name = "tc358743", + .of_match_table = of_match_ptr(tc358743_of_match), }, .probe = tc358743_probe, .remove = tc358743_remove, diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c index 48646a7f3fb0..04e96b3057bb 100644 --- a/drivers/media/i2c/tvp5150.c +++ b/drivers/media/i2c/tvp5150.c @@ -865,13 +865,13 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f; struct tvp5150 *decoder = to_tvp5150(sd); - if (!format || format->pad) + if (!format || (format->pad != DEMOD_PAD_VID_OUT)) return -EINVAL; f = &format->format; f->width = decoder->rect.width; - f->height = decoder->rect.height / 2; + f->height = decoder->rect.height; f->code = MEDIA_BUS_FMT_UYVY8_2X8; f->field = V4L2_FIELD_ALTERNATE; diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c index 5640ca29da8c..bc44193efa47 100644 --- a/drivers/media/media-entity.c +++ b/drivers/media/media-entity.c @@ -199,12 +199,12 @@ void media_gobj_create(struct media_device *mdev, void media_gobj_destroy(struct media_gobj *gobj) { - dev_dbg_obj(__func__, gobj); - /* Do nothing if the object is not linked. */ if (gobj->mdev == NULL) return; + dev_dbg_obj(__func__, gobj); + gobj->mdev->topology_version++; /* Remove the object from mdev list */ diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c index a1b0f3193bc0..5cc42b426715 100644 --- a/drivers/media/pci/bt8xx/bttv-cards.c +++ b/drivers/media/pci/bt8xx/bttv-cards.c @@ -3717,7 +3717,7 @@ static void hauppauge_eeprom(struct bttv *btv) { struct tveeprom tv; - tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data); + tveeprom_hauppauge_analog(&tv, eeprom_data); btv->tuner_type = tv.tuner_type; btv->has_radio = tv.has_radio; diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c index fb4aefbcc8f8..ed319f18ba48 100644 --- a/drivers/media/pci/bt8xx/bttv-driver.c +++ b/drivers/media/pci/bt8xx/bttv-driver.c @@ -4043,9 +4043,7 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) INIT_LIST_HEAD(&btv->capture); INIT_LIST_HEAD(&btv->vcapture); - init_timer(&btv->timeout); - btv->timeout.function = bttv_irq_timeout; - btv->timeout.data = (unsigned long)btv; + setup_timer(&btv->timeout, bttv_irq_timeout, (unsigned long)btv); btv->i2c_rc = -1; btv->tuner_type = UNSET; diff --git a/drivers/media/pci/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c index 206db81ef78e..8bce49cdad46 100644 --- a/drivers/media/pci/cx18/cx18-driver.c +++ b/drivers/media/pci/cx18/cx18-driver.c @@ -339,7 +339,7 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv) case CX18_CARD_HVR_1600_ESMT: case CX18_CARD_HVR_1600_SAMSUNG: case CX18_CARD_HVR_1600_S5H1411: - tveeprom_hauppauge_analog(c, tv, eedata); + tveeprom_hauppauge_analog(tv, eedata); break; case CX18_CARD_YUAN_MPC718: case CX18_CARD_GOTVIEW_PCI_DVD3: diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c index 7c9381448966..3c45e0071530 100644 --- a/drivers/media/pci/cx18/cx18-streams.c +++ b/drivers/media/pci/cx18/cx18-streams.c @@ -282,9 +282,7 @@ static void cx18_stream_init(struct cx18 *cx, int type) INIT_WORK(&s->out_work_order, cx18_out_work_handler); INIT_LIST_HEAD(&s->vb_capture); - s->vb_timeout.function = cx18_vb_timeout; - s->vb_timeout.data = (unsigned long)s; - init_timer(&s->vb_timeout); + setup_timer(&s->vb_timeout, cx18_vb_timeout, (unsigned long)s); spin_lock_init(&s->vb_lock); if (type == CX18_ENC_STREAM_TYPE_YUV) { spin_lock_init(&s->vbuf_q_lock); diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 0350f13c5a9f..9e39aea85df6 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -1143,8 +1143,7 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) { struct tveeprom tv; - tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, - eeprom_data); + tveeprom_hauppauge_analog(&tv, eeprom_data); /* Make sure we support the board model */ switch (tv.model) { diff --git a/drivers/media/pci/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c index cdfbde277b8b..73cc7a67a8bc 100644 --- a/drivers/media/pci/cx88/cx88-cards.c +++ b/drivers/media/pci/cx88/cx88-cards.c @@ -2854,7 +2854,7 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data) { struct tveeprom tv; - tveeprom_hauppauge_analog(&core->i2c_client, &tv, eeprom_data); + tveeprom_hauppauge_analog(&tv, eeprom_data); core->board.tuner_type = tv.tuner_type; core->tuner_formats = tv.tuner_formats; core->board.radio.type = tv.has_radio ? CX88_RADIO : 0; @@ -3670,7 +3670,7 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) if (!core) return NULL; - atomic_inc(&core->refcount); + refcount_set(&core->refcount, 1); core->pci_bus = pci->bus->number; core->pci_slot = PCI_SLOT(pci->devfn); core->pci_irqmask = PCI_INT_RISC_RD_BERRINT | PCI_INT_RISC_WR_BERRINT | diff --git a/drivers/media/pci/cx88/cx88-core.c b/drivers/media/pci/cx88/cx88-core.c index 973a9cd4c635..8bfa5b7ed91b 100644 --- a/drivers/media/pci/cx88/cx88-core.c +++ b/drivers/media/pci/cx88/cx88-core.c @@ -1052,7 +1052,7 @@ struct cx88_core *cx88_core_get(struct pci_dev *pci) mutex_unlock(&devlist); return NULL; } - atomic_inc(&core->refcount); + refcount_inc(&core->refcount); mutex_unlock(&devlist); return core; } @@ -1073,7 +1073,7 @@ void cx88_core_put(struct cx88_core *core, struct pci_dev *pci) release_mem_region(pci_resource_start(pci, 0), pci_resource_len(pci, 0)); - if (!atomic_dec_and_test(&core->refcount)) + if (!refcount_dec_and_test(&core->refcount)) return; mutex_lock(&devlist); diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c index ddf90678df34..49a335f4603e 100644 --- a/drivers/media/pci/cx88/cx88-dvb.c +++ b/drivers/media/pci/cx88/cx88-dvb.c @@ -306,7 +306,7 @@ static const struct zl10353_config cx88_terratec_cinergy_ht_pci_mkii_config = { .if2 = 45600, }; -static struct mb86a16_config twinhan_vp1027 = { +static const struct mb86a16_config twinhan_vp1027 = { .demod_address = 0x08, }; diff --git a/drivers/media/pci/cx88/cx88.h b/drivers/media/pci/cx88/cx88.h index 115414cf520f..6777926f20f2 100644 --- a/drivers/media/pci/cx88/cx88.h +++ b/drivers/media/pci/cx88/cx88.h @@ -24,6 +24,7 @@ #include <linux/i2c-algo-bit.h> #include <linux/videodev2.h> #include <linux/kdev_t.h> +#include <linux/refcount.h> #include <media/v4l2-device.h> #include <media/v4l2-fh.h> @@ -339,7 +340,7 @@ struct cx8802_dev; struct cx88_core { struct list_head devlist; - atomic_t refcount; + refcount_t refcount; /* board name */ int nr; diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c index a7724b78fbb4..1d41934cfaf5 100644 --- a/drivers/media/pci/dm1105/dm1105.c +++ b/drivers/media/pci/dm1105/dm1105.c @@ -815,7 +815,7 @@ static void dm1105_hw_exit(struct dm1105_dev *dev) dm1105_dma_unmap(dev); } -static struct stv0299_config sharp_z0194a_config = { +static const struct stv0299_config sharp_z0194a_config = { .demod_address = 0x68, .inittab = sharp_z0194a_inittab, .mclk = 88000000UL, diff --git a/drivers/media/pci/ivtv/ivtv-driver.c b/drivers/media/pci/ivtv/ivtv-driver.c index e73c153285f0..e8fa99b6c7b4 100644 --- a/drivers/media/pci/ivtv/ivtv-driver.c +++ b/drivers/media/pci/ivtv/ivtv-driver.c @@ -409,7 +409,7 @@ void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv) itv->i2c_client.addr = 0xA0 >> 1; tveeprom_read(&itv->i2c_client, eedata, sizeof(eedata)); - tveeprom_hauppauge_analog(&itv->i2c_client, tv, eedata); + tveeprom_hauppauge_analog(tv, eedata); } static void ivtv_process_eeprom(struct ivtv *itv) @@ -770,9 +770,8 @@ static int ivtv_init_struct1(struct ivtv *itv) init_waitqueue_head(&itv->event_waitq); init_waitqueue_head(&itv->vsync_waitq); init_waitqueue_head(&itv->dma_waitq); - init_timer(&itv->dma_timer); - itv->dma_timer.function = ivtv_unfinished_dma; - itv->dma_timer.data = (unsigned long)itv; + setup_timer(&itv->dma_timer, ivtv_unfinished_dma, + (unsigned long)itv); itv->cur_dma_stream = -1; itv->cur_pio_stream = -1; diff --git a/drivers/media/pci/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c index f956188f7f19..670462d195b5 100644 --- a/drivers/media/pci/ivtv/ivtv-ioctl.c +++ b/drivers/media/pci/ivtv/ivtv-ioctl.c @@ -1506,10 +1506,8 @@ static int ivtv_subscribe_event(struct v4l2_fh *fh, const struct v4l2_event_subs case V4L2_EVENT_VSYNC: case V4L2_EVENT_EOS: return v4l2_event_subscribe(fh, sub, 0, NULL); - case V4L2_EVENT_CTRL: - return v4l2_event_subscribe(fh, sub, 0, &v4l2_ctrl_sub_ev_ops); default: - return -EINVAL; + return v4l2_ctrl_subscribe_event(fh, sub); } } diff --git a/drivers/media/pci/ivtv/ivtv-udma.c b/drivers/media/pci/ivtv/ivtv-udma.c index 2c9232ef7baa..3b33e87ed73b 100644 --- a/drivers/media/pci/ivtv/ivtv-udma.c +++ b/drivers/media/pci/ivtv/ivtv-udma.c @@ -76,7 +76,7 @@ void ivtv_udma_fill_sg_array (struct ivtv_user_dma *dma, u32 buffer_offset, u32 int i; struct scatterlist *sg; - for (i = 0, sg = dma->SGlist; i < dma->SG_length; i++, sg = sg_next(sg)) { + for_each_sg(dma->SGlist, sg, dma->SG_length, i) { dma->SGarray[i].size = cpu_to_le32(sg_dma_len(sg)); dma->SGarray[i].src = cpu_to_le32(sg_dma_address(sg)); dma->SGarray[i].dst = cpu_to_le32(buffer_offset); diff --git a/drivers/media/pci/mantis/mantis_vp1034.c b/drivers/media/pci/mantis/mantis_vp1034.c index 3b1928594b12..e4972ff823c2 100644 --- a/drivers/media/pci/mantis/mantis_vp1034.c +++ b/drivers/media/pci/mantis/mantis_vp1034.c @@ -36,7 +36,7 @@ #include "mantis_vp1034.h" #include "mantis_reg.h" -static struct mb86a16_config vp1034_mb86a16_config = { +static const struct mb86a16_config vp1034_mb86a16_config = { .demod_address = 0x08, .set_voltage = vp1034_set_voltage, }; diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c index 191bd8299dc3..9444483fb942 100644 --- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c +++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c @@ -663,9 +663,8 @@ static int netup_unidvb_dma_init(struct netup_unidvb_dev *ndev, int num) spin_lock_init(&dma->lock); INIT_WORK(&dma->work, netup_unidvb_dma_worker); INIT_LIST_HEAD(&dma->free_buffers); - dma->timeout.function = netup_unidvb_dma_timeout; - dma->timeout.data = (unsigned long)dma; - init_timer(&dma->timeout); + setup_timer(&dma->timeout, netup_unidvb_dma_timeout, + (unsigned long)dma); dma->ring_buffer_size = ndev->dma_size / 2; dma->addr_virt = ndev->dma_virt + dma->ring_buffer_size * num; dma->addr_phys = (dma_addr_t)((u64)ndev->dma_phys + diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c index 321253827997..f79380faf499 100644 --- a/drivers/media/pci/saa7134/saa7134-cards.c +++ b/drivers/media/pci/saa7134/saa7134-cards.c @@ -7319,7 +7319,7 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data) { struct tveeprom tv; - tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data); + tveeprom_hauppauge_analog(&tv, eeprom_data); /* Make sure we support the board model */ switch (tv.model) { diff --git a/drivers/media/pci/saa7134/saa7134-dvb.c b/drivers/media/pci/saa7134/saa7134-dvb.c index efdece5ab11c..731dee0a66e7 100644 --- a/drivers/media/pci/saa7134/saa7134-dvb.c +++ b/drivers/media/pci/saa7134/saa7134-dvb.c @@ -1042,11 +1042,11 @@ static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) * nxt200x based ATSC cards, helper functions */ -static struct nxt200x_config avertvhda180 = { +static const struct nxt200x_config avertvhda180 = { .demod_address = 0x0a, }; -static struct nxt200x_config kworldatsc110 = { +static const struct nxt200x_config kworldatsc110 = { .demod_address = 0x0a, }; diff --git a/drivers/media/pci/saa7134/saa7134-ts.c b/drivers/media/pci/saa7134/saa7134-ts.c index 578e03f8c041..7414878af9e0 100644 --- a/drivers/media/pci/saa7134/saa7134-ts.c +++ b/drivers/media/pci/saa7134/saa7134-ts.c @@ -223,9 +223,8 @@ int saa7134_ts_init1(struct saa7134_dev *dev) dev->ts.nr_packets = ts_nr_packets; INIT_LIST_HEAD(&dev->ts_q.queue); - init_timer(&dev->ts_q.timeout); - dev->ts_q.timeout.function = saa7134_buffer_timeout; - dev->ts_q.timeout.data = (unsigned long)(&dev->ts_q); + setup_timer(&dev->ts_q.timeout, saa7134_buffer_timeout, + (unsigned long)(&dev->ts_q)); dev->ts_q.dev = dev; dev->ts_q.need_two = 1; dev->ts_started = 0; diff --git a/drivers/media/pci/saa7134/saa7134-vbi.c b/drivers/media/pci/saa7134/saa7134-vbi.c index 46193370e41a..bcad9b2d9bb3 100644 --- a/drivers/media/pci/saa7134/saa7134-vbi.c +++ b/drivers/media/pci/saa7134/saa7134-vbi.c @@ -181,9 +181,8 @@ struct vb2_ops saa7134_vbi_qops = { int saa7134_vbi_init1(struct saa7134_dev *dev) { INIT_LIST_HEAD(&dev->vbi_q.queue); - init_timer(&dev->vbi_q.timeout); - dev->vbi_q.timeout.function = saa7134_buffer_timeout; - dev->vbi_q.timeout.data = (unsigned long)(&dev->vbi_q); + setup_timer(&dev->vbi_q.timeout, saa7134_buffer_timeout, + (unsigned long)(&dev->vbi_q)); dev->vbi_q.dev = dev; if (vbibufs < 2) diff --git a/drivers/media/pci/saa7134/saa7134-video.c b/drivers/media/pci/saa7134/saa7134-video.c index 4b1c4327f112..51d42bbf969e 100644 --- a/drivers/media/pci/saa7134/saa7134-video.c +++ b/drivers/media/pci/saa7134/saa7134-video.c @@ -2145,9 +2145,8 @@ int saa7134_video_init1(struct saa7134_dev *dev) dev->automute = 0; INIT_LIST_HEAD(&dev->video_q.queue); - init_timer(&dev->video_q.timeout); - dev->video_q.timeout.function = saa7134_buffer_timeout; - dev->video_q.timeout.data = (unsigned long)(&dev->video_q); + setup_timer(&dev->video_q.timeout, saa7134_buffer_timeout, + (unsigned long)(&dev->video_q)); dev->video_q.dev = dev; dev->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24); dev->width = 720; diff --git a/drivers/media/pci/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c index 0e1cd7e153ca..3af16062e79d 100644 --- a/drivers/media/pci/saa7164/saa7164-cards.c +++ b/drivers/media/pci/saa7164/saa7164-cards.c @@ -780,9 +780,7 @@ static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data) { struct tveeprom tv; - /* TODO: Assumption: eeprom on bus 0 */ - tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, - eeprom_data); + tveeprom_hauppauge_analog(&tv, eeprom_data); /* Make sure we support the board model */ switch (tv.model) { diff --git a/drivers/media/pci/saa7164/saa7164-cmd.c b/drivers/media/pci/saa7164/saa7164-cmd.c index f55c177fd1e4..175015ca79f2 100644 --- a/drivers/media/pci/saa7164/saa7164-cmd.c +++ b/drivers/media/pci/saa7164/saa7164-cmd.c @@ -130,14 +130,13 @@ int saa7164_irq_dequeue(struct saa7164_dev *dev) * -bus/c running buffer. */ static int saa7164_cmd_dequeue(struct saa7164_dev *dev) { - int loop = 1; int ret; u32 timeout; wait_queue_head_t *q = NULL; u8 tmp[512]; dprintk(DBGLVL_CMD, "%s()\n", __func__); - while (loop) { + while (true) { struct tmComResInfo tRsp = { 0, 0, 0, 0, 0, 0 }; ret = saa7164_bus_get(dev, &tRsp, NULL, 1); @@ -178,8 +177,6 @@ static int saa7164_cmd_dequeue(struct saa7164_dev *dev) wake_up(q); return SAA_OK; } - - return SAA_OK; } static int saa7164_cmd_set(struct saa7164_dev *dev, struct tmComResInfo *msg, diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c index 25a2137ab799..25f9f2ebff1d 100644 --- a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c +++ b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c @@ -1140,14 +1140,13 @@ static int solo_subscribe_event(struct v4l2_fh *fh, { switch (sub->type) { - case V4L2_EVENT_CTRL: - return v4l2_ctrl_subscribe_event(fh, sub); case V4L2_EVENT_MOTION_DET: /* Allow for up to 30 events (1 second for NTSC) to be * stored. */ return v4l2_event_subscribe(fh, sub, 30, NULL); + default: + return v4l2_ctrl_subscribe_event(fh, sub); } - return -EINVAL; } static const struct v4l2_file_operations solo_enc_fops = { diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2.c b/drivers/media/pci/solo6x10/solo6x10-v4l2.c index 896bec6627aa..3266fc21825f 100644 --- a/drivers/media/pci/solo6x10/solo6x10-v4l2.c +++ b/drivers/media/pci/solo6x10/solo6x10-v4l2.c @@ -341,6 +341,17 @@ static void solo_stop_streaming(struct vb2_queue *q) struct solo_dev *solo_dev = vb2_get_drv_priv(q); solo_stop_thread(solo_dev); + + spin_lock(&solo_dev->slock); + while (!list_empty(&solo_dev->vidq_active)) { + struct solo_vb2_buf *buf = list_entry( + solo_dev->vidq_active.next, + struct solo_vb2_buf, list); + + list_del(&buf->list); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + } + spin_unlock(&solo_dev->slock); INIT_LIST_HEAD(&solo_dev->vidq_active); } diff --git a/drivers/media/pci/ttpci/av7110_ir.c b/drivers/media/pci/ttpci/av7110_ir.c index 10e28f067b45..ca05198de2c2 100644 --- a/drivers/media/pci/ttpci/av7110_ir.c +++ b/drivers/media/pci/ttpci/av7110_ir.c @@ -333,9 +333,8 @@ int av7110_ir_init(struct av7110 *av7110) av_list[av_cnt++] = av7110; av7110_check_ir_config(av7110, true); - init_timer(&av7110->ir.keyup_timer); - av7110->ir.keyup_timer.function = av7110_emit_keyup; - av7110->ir.keyup_timer.data = (unsigned long) &av7110->ir; + setup_timer(&av7110->ir.keyup_timer, av7110_emit_keyup, + (unsigned long)&av7110->ir); input_dev = input_allocate_device(); if (!input_dev) diff --git a/drivers/media/pci/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c index 19f07d4aba6a..dc7be8fac9a3 100644 --- a/drivers/media/pci/ttpci/budget-av.c +++ b/drivers/media/pci/ttpci/budget-av.c @@ -577,7 +577,7 @@ static u8 typhoon_cinergy1200s_inittab[] = { 0xff, 0xff }; -static struct stv0299_config typhoon_config = { +static const struct stv0299_config typhoon_config = { .demod_address = 0x68, .inittab = typhoon_cinergy1200s_inittab, .mclk = 88000000UL, @@ -590,7 +590,7 @@ static struct stv0299_config typhoon_config = { }; -static struct stv0299_config cinergy_1200s_config = { +static const struct stv0299_config cinergy_1200s_config = { .demod_address = 0x68, .inittab = typhoon_cinergy1200s_inittab, .mclk = 88000000UL, @@ -602,7 +602,7 @@ static struct stv0299_config cinergy_1200s_config = { .set_symbol_rate = philips_su1278_ty_ci_set_symbol_rate, }; -static struct stv0299_config cinergy_1200s_1894_0010_config = { +static const struct stv0299_config cinergy_1200s_1894_0010_config = { .demod_address = 0x68, .inittab = typhoon_cinergy1200s_inittab, .mclk = 88000000UL, @@ -876,7 +876,7 @@ static int philips_sd1878_ci_set_symbol_rate(struct dvb_frontend *fe, return 0; } -static struct stv0299_config philips_sd1878_config = { +static const struct stv0299_config philips_sd1878_config = { .demod_address = 0x68, .inittab = philips_sd1878_inittab, .mclk = 88000000UL, diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c index 68355484ba7d..11b9227307bf 100644 --- a/drivers/media/pci/ttpci/budget-ci.c +++ b/drivers/media/pci/ttpci/budget-ci.c @@ -693,7 +693,7 @@ static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe) return 0; } -static struct stv0299_config philips_su1278_tt_config = { +static const struct stv0299_config philips_su1278_tt_config = { .demod_address = 0x68, .inittab = philips_su1278_tt_inittab, diff --git a/drivers/media/pci/ttpci/budget.c b/drivers/media/pci/ttpci/budget.c index 5f17e1c9a207..81fe35cedd10 100644 --- a/drivers/media/pci/ttpci/budget.c +++ b/drivers/media/pci/ttpci/budget.c @@ -397,7 +397,7 @@ static struct tda10086_config tda10086_config = { .xtal_freq = TDA10086_XTAL_16M, }; -static struct stv0299_config alps_bsru6_config_activy = { +static const struct stv0299_config alps_bsru6_config_activy = { .demod_address = 0x68, .inittab = alps_bsru6_inittab, .mclk = 88000000UL, @@ -407,7 +407,7 @@ static struct stv0299_config alps_bsru6_config_activy = { .set_symbol_rate = alps_bsru6_set_symbol_rate, }; -static struct stv0299_config alps_bsbe1_config_activy = { +static const struct stv0299_config alps_bsbe1_config_activy = { .demod_address = 0x68, .inittab = alps_bsbe1_inittab, .mclk = 88000000UL, diff --git a/drivers/media/pci/tw5864/tw5864-video.c b/drivers/media/pci/tw5864/tw5864-video.c index 9421216bb942..2a044be729da 100644 --- a/drivers/media/pci/tw5864/tw5864-video.c +++ b/drivers/media/pci/tw5864/tw5864-video.c @@ -664,15 +664,14 @@ static int tw5864_subscribe_event(struct v4l2_fh *fh, const struct v4l2_event_subscription *sub) { switch (sub->type) { - case V4L2_EVENT_CTRL: - return v4l2_ctrl_subscribe_event(fh, sub); case V4L2_EVENT_MOTION_DET: /* * Allow for up to 30 events (1 second for NTSC) to be stored. */ return v4l2_event_subscribe(fh, sub, 30, NULL); + default: + return v4l2_ctrl_subscribe_event(fh, sub); } - return -EINVAL; } static void tw5864_frame_interval_set(struct tw5864_input *input) @@ -717,6 +716,8 @@ static void tw5864_frame_interval_set(struct tw5864_input *input) static int tw5864_frameinterval_get(struct tw5864_input *input, struct v4l2_fract *frameinterval) { + struct tw5864_dev *dev = input->root; + switch (input->std) { case STD_NTSC: frameinterval->numerator = 1001; @@ -728,8 +729,8 @@ static int tw5864_frameinterval_get(struct tw5864_input *input, frameinterval->denominator = 25; break; default: - WARN(1, "tw5864_frameinterval_get requested for unknown std %d\n", - input->std); + dev_warn(&dev->pci->dev, "tw5864_frameinterval_get requested for unknown std %d\n", + input->std); return -EINVAL; } diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index c9106e105bab..ac026ee1ca07 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -151,7 +151,7 @@ if V4L_MEM2MEM_DRIVERS config VIDEO_CODA tristate "Chips&Media Coda multi-standard codec IP" - depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC + depends on VIDEO_DEV && VIDEO_V4L2 && (ARCH_MXC || COMPILE_TEST) depends on HAS_DMA select SRAM select VIDEOBUF2_DMA_CONTIG @@ -165,6 +165,21 @@ config VIDEO_CODA config VIDEO_IMX_VDOA def_tristate VIDEO_CODA if SOC_IMX6Q || COMPILE_TEST +config VIDEO_MEDIATEK_JPEG + tristate "Mediatek JPEG Codec driver" + depends on MTK_IOMMU_V1 || COMPILE_TEST + depends on VIDEO_DEV && VIDEO_V4L2 + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on HAS_DMA + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + ---help--- + Mediatek jpeg codec driver provides HW capability to decode + JPEG format + + To compile this driver as a module, choose M here: the + module will be called mtk-jpeg + config VIDEO_MEDIATEK_VPU tristate "Mediatek Video Processor Unit" depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA @@ -405,6 +420,7 @@ config VIDEO_RENESAS_VSP1 depends on (ARCH_RENESAS && OF) || COMPILE_TEST depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP select VIDEOBUF2_DMA_CONTIG + select VIDEOBUF2_VMALLOC ---help--- This is a V4L2 driver for the Renesas VSP1 video processing engine. @@ -451,6 +467,8 @@ menuconfig V4L_TEST_DRIVERS if V4L_TEST_DRIVERS +source "drivers/media/platform/vimc/Kconfig" + source "drivers/media/platform/vivid/Kconfig" config VIDEO_VIM2M @@ -474,3 +492,31 @@ menuconfig DVB_PLATFORM_DRIVERS if DVB_PLATFORM_DRIVERS source "drivers/media/platform/sti/c8sectpfe/Kconfig" endif #DVB_PLATFORM_DRIVERS + +menuconfig CEC_PLATFORM_DRIVERS + bool "CEC platform devices" + depends on MEDIA_CEC_SUPPORT + +if CEC_PLATFORM_DRIVERS + +config VIDEO_SAMSUNG_S5P_CEC + tristate "Samsung S5P CEC driver" + depends on CEC_CORE && (PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST) + select MEDIA_CEC_NOTIFIER + ---help--- + This is a driver for Samsung S5P HDMI CEC interface. It uses the + generic CEC framework interface. + CEC bus is present in the HDMI connector and enables communication + between compatible devices. + +config VIDEO_STI_HDMI_CEC + tristate "STMicroelectronics STiH4xx HDMI CEC driver" + depends on CEC_CORE && (ARCH_STI || COMPILE_TEST) + select MEDIA_CEC_NOTIFIER + ---help--- + This is a driver for STIH4xx HDMI CEC interface. It uses the + generic CEC framework interface. + CEC bus is present in the HDMI connector and enables communication + between compatible devices. + +endif #CEC_PLATFORM_DRIVERS diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index 349ddf6a69da..63303d63c64c 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o +obj-$(CONFIG_VIDEO_VIMC) += vimc/ obj-$(CONFIG_VIDEO_VIVID) += vivid/ obj-$(CONFIG_VIDEO_VIM2M) += vim2m.o @@ -33,11 +34,13 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC) += s5p-cec/ obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC) += exynos-gsc/ obj-$(CONFIG_VIDEO_STI_BDISP) += sti/bdisp/ obj-$(CONFIG_VIDEO_STI_HVA) += sti/hva/ obj-$(CONFIG_DVB_C8SECTPFE) += sti/c8sectpfe/ +obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += sti/cec/ obj-$(CONFIG_VIDEO_STI_DELTA) += sti/delta/ @@ -63,6 +66,7 @@ obj-$(CONFIG_VIDEO_XILINX) += xilinx/ obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/ obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/ +obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/ ccflags-y += -I$(srctree)/drivers/media/i2c @@ -71,3 +75,5 @@ obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/ obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec/ obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp/ + +obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk-jpeg/ diff --git a/drivers/media/platform/atmel/Kconfig b/drivers/media/platform/atmel/Kconfig index 867dca22a473..9bd0f19b127f 100644 --- a/drivers/media/platform/atmel/Kconfig +++ b/drivers/media/platform/atmel/Kconfig @@ -6,4 +6,13 @@ config VIDEO_ATMEL_ISC select REGMAP_MMIO help This module makes the ATMEL Image Sensor Controller available - as a v4l2 device.
\ No newline at end of file + as a v4l2 device. + +config VIDEO_ATMEL_ISI + tristate "ATMEL Image Sensor Interface (ISI) support" + depends on VIDEO_V4L2 && OF && HAS_DMA + depends on ARCH_AT91 || COMPILE_TEST + select VIDEOBUF2_DMA_CONTIG + ---help--- + This module makes the ATMEL Image Sensor Interface available + as a v4l2 device. diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile index 9d7c999d434d..27000d099a5e 100644 --- a/drivers/media/platform/atmel/Makefile +++ b/drivers/media/platform/atmel/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o +obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h index 00c449717cde..6936ac467609 100644 --- a/drivers/media/platform/atmel/atmel-isc-regs.h +++ b/drivers/media/platform/atmel/atmel-isc-regs.h @@ -65,6 +65,7 @@ #define ISC_INTSR 0x00000034 #define ISC_INT_DDONE BIT(8) +#define ISC_INT_HISDONE BIT(12) /* ISC White Balance Control Register */ #define ISC_WB_CTRL 0x00000058 @@ -72,30 +73,98 @@ /* ISC White Balance Configuration Register */ #define ISC_WB_CFG 0x0000005c +/* ISC White Balance Offset for R, GR Register */ +#define ISC_WB_O_RGR 0x00000060 + +/* ISC White Balance Offset for B, GB Register */ +#define ISC_WB_O_BGR 0x00000064 + +/* ISC White Balance Gain for R, GR Register */ +#define ISC_WB_G_RGR 0x00000068 + +/* ISC White Balance Gain for B, GB Register */ +#define ISC_WB_G_BGR 0x0000006c + /* ISC Color Filter Array Control Register */ #define ISC_CFA_CTRL 0x00000070 /* ISC Color Filter Array Configuration Register */ #define ISC_CFA_CFG 0x00000074 +#define ISC_CFA_CFG_EITPOL BIT(4) #define ISC_BAY_CFG_GRGR 0x0 #define ISC_BAY_CFG_RGRG 0x1 #define ISC_BAY_CFG_GBGB 0x2 #define ISC_BAY_CFG_BGBG 0x3 -#define ISC_BAY_CFG_MASK GENMASK(1, 0) /* ISC Color Correction Control Register */ #define ISC_CC_CTRL 0x00000078 +/* ISC Color Correction RR RG Register */ +#define ISC_CC_RR_RG 0x0000007c + +/* ISC Color Correction RB OR Register */ +#define ISC_CC_RB_OR 0x00000080 + +/* ISC Color Correction GR GG Register */ +#define ISC_CC_GR_GG 0x00000084 + +/* ISC Color Correction GB OG Register */ +#define ISC_CC_GB_OG 0x00000088 + +/* ISC Color Correction BR BG Register */ +#define ISC_CC_BR_BG 0x0000008c + +/* ISC Color Correction BB OB Register */ +#define ISC_CC_BB_OB 0x00000090 + /* ISC Gamma Correction Control Register */ #define ISC_GAM_CTRL 0x00000094 +/* ISC_Gamma Correction Blue Entry Register */ +#define ISC_GAM_BENTRY 0x00000098 + +/* ISC_Gamma Correction Green Entry Register */ +#define ISC_GAM_GENTRY 0x00000198 + +/* ISC_Gamma Correction Green Entry Register */ +#define ISC_GAM_RENTRY 0x00000298 + /* Color Space Conversion Control Register */ #define ISC_CSC_CTRL 0x00000398 +/* Color Space Conversion YR YG Register */ +#define ISC_CSC_YR_YG 0x0000039c + +/* Color Space Conversion YB OY Register */ +#define ISC_CSC_YB_OY 0x000003a0 + +/* Color Space Conversion CBR CBG Register */ +#define ISC_CSC_CBR_CBG 0x000003a4 + +/* Color Space Conversion CBB OCB Register */ +#define ISC_CSC_CBB_OCB 0x000003a8 + +/* Color Space Conversion CRR CRG Register */ +#define ISC_CSC_CRR_CRG 0x000003ac + +/* Color Space Conversion CRB OCR Register */ +#define ISC_CSC_CRB_OCR 0x000003b0 + /* Contrast And Brightness Control Register */ #define ISC_CBC_CTRL 0x000003b4 +/* Contrast And Brightness Configuration Register */ +#define ISC_CBC_CFG 0x000003b8 + +/* Brightness Register */ +#define ISC_CBC_BRIGHT 0x000003bc +#define ISC_CBC_BRIGHT_MASK GENMASK(10, 0) + +/* Contrast Register */ +#define ISC_CBC_CONTRAST 0x000003c0 +#define ISC_CBC_CONTRAST_MASK GENMASK(11, 0) + /* Subsampling 4:4:4 to 4:2:2 Control Register */ #define ISC_SUB422_CTRL 0x000003c4 @@ -120,6 +189,27 @@ #define ISC_RLP_CFG_MODE_YYCC_LIMITED 0xc #define ISC_RLP_CFG_MODE_MASK GENMASK(3, 0) +/* Histogram Control Register */ +#define ISC_HIS_CTRL 0x000003d4 + +#define ISC_HIS_CTRL_EN BIT(0) +#define ISC_HIS_CTRL_DIS 0x0 + +/* Histogram Configuration Register */ +#define ISC_HIS_CFG 0x000003d8 + +#define ISC_HIS_CFG_MODE_GR 0x0 +#define ISC_HIS_CFG_MODE_R 0x1 +#define ISC_HIS_CFG_MODE_GB 0x2 +#define ISC_HIS_CFG_MODE_B 0x3 +#define ISC_HIS_CFG_MODE_Y 0x4 +#define ISC_HIS_CFG_MODE_RAW 0x5 +#define ISC_HIS_CFG_MODE_YCCIR656 0x6 + +#define ISC_HIS_CFG_BAYSEL_SHIFT 4 + +#define ISC_HIS_CFG_RAR BIT(8) + /* DMA Configuration Register */ #define ISC_DCFG 0x000003e0 #define ISC_DCFG_IMODE_PACKED8 0x0 @@ -159,7 +249,13 @@ /* DMA Address 0 Register */ #define ISC_DAD0 0x000003ec -/* DMA Stride 0 Register */ -#define ISC_DST0 0x000003f0 +/* DMA Address 1 Register */ +#define ISC_DAD1 0x000003f4 + +/* DMA Address 2 Register */ +#define ISC_DAD2 0x000003fc + +/* Histogram Entry */ +#define ISC_HIS_ENTRY 0x00000410 #endif diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c index fa68fe912c95..c4b2115559a5 100644 --- a/drivers/media/platform/atmel/atmel-isc.c +++ b/drivers/media/platform/atmel/atmel-isc.c @@ -29,6 +29,7 @@ #include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/math64.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> @@ -36,7 +37,9 @@ #include <linux/regmap.h> #include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> +#include <media/v4l2-event.h> #include <media/v4l2-image-sizes.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-of.h> @@ -89,10 +92,12 @@ struct isc_subdev_entity { * struct isc_format - ISC media bus format information * @fourcc: Fourcc code for this format * @mbus_code: V4L2 media bus format code. - * @bpp: Bytes per pixel (when stored in memory) + * @bpp: Bits per pixel (when stored in memory) * @reg_bps: reg value for bits per sample * (when transferred over a bus) - * @support: Indicates format supported by subdev + * @pipeline: pipeline switch + * @sd_support: Subdev supports this format + * @isc_support: ISC can convert raw format to this format */ struct isc_format { u32 fourcc; @@ -100,11 +105,42 @@ struct isc_format { u8 bpp; u32 reg_bps; + u32 reg_bay_cfg; u32 reg_rlp_mode; u32 reg_dcfg_imode; u32 reg_dctrl_dview; - bool support; + u32 pipeline; + + bool sd_support; + bool isc_support; +}; + + +#define HIST_ENTRIES 512 +#define HIST_BAYER (ISC_HIS_CFG_MODE_B + 1) + +enum{ + HIST_INIT = 0, + HIST_ENABLED, + HIST_DISABLED, +}; + +struct isc_ctrls { + struct v4l2_ctrl_handler handler; + + u32 brightness; + u32 contrast; + u8 gamma_index; + u8 awb; + + u32 r_gain; + u32 b_gain; + + u32 hist_entry[HIST_ENTRIES]; + u32 hist_count[HIST_BAYER]; + u8 hist_id; + u8 hist_stat; }; #define ISC_PIPE_LINE_NODE_NUM 11 @@ -131,6 +167,10 @@ struct isc_device { struct isc_format **user_formats; unsigned int num_user_formats; const struct isc_format *current_fmt; + const struct isc_format *raw_fmt; + + struct isc_ctrls ctrls; + struct work_struct awb_work; struct mutex lock; @@ -140,51 +180,134 @@ struct isc_device { struct list_head subdev_entities; }; +#define RAW_FMT_IND_START 0 +#define RAW_FMT_IND_END 11 +#define ISC_FMT_IND_START 12 +#define ISC_FMT_IND_END 14 + static struct isc_format isc_formats[] = { - { V4L2_PIX_FMT_SBGGR8, MEDIA_BUS_FMT_SBGGR8_1X8, - 1, ISC_PFE_CFG0_BPS_EIGHT, ISC_RLP_CFG_MODE_DAT8, - ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, false }, - { V4L2_PIX_FMT_SGBRG8, MEDIA_BUS_FMT_SGBRG8_1X8, - 1, ISC_PFE_CFG0_BPS_EIGHT, ISC_RLP_CFG_MODE_DAT8, - ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, false }, - { V4L2_PIX_FMT_SGRBG8, MEDIA_BUS_FMT_SGRBG8_1X8, - 1, ISC_PFE_CFG0_BPS_EIGHT, ISC_RLP_CFG_MODE_DAT8, - ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, false }, - { V4L2_PIX_FMT_SRGGB8, MEDIA_BUS_FMT_SRGGB8_1X8, - 1, ISC_PFE_CFG0_BPS_EIGHT, ISC_RLP_CFG_MODE_DAT8, - ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, false }, - - { V4L2_PIX_FMT_SBGGR10, MEDIA_BUS_FMT_SBGGR10_1X10, - 2, ISC_PFG_CFG0_BPS_TEN, ISC_RLP_CFG_MODE_DAT10, - ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, false }, - { V4L2_PIX_FMT_SGBRG10, MEDIA_BUS_FMT_SGBRG10_1X10, - 2, ISC_PFG_CFG0_BPS_TEN, ISC_RLP_CFG_MODE_DAT10, - ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, false }, - { V4L2_PIX_FMT_SGRBG10, MEDIA_BUS_FMT_SGRBG10_1X10, - 2, ISC_PFG_CFG0_BPS_TEN, ISC_RLP_CFG_MODE_DAT10, - ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, false }, - { V4L2_PIX_FMT_SRGGB10, MEDIA_BUS_FMT_SRGGB10_1X10, - 2, ISC_PFG_CFG0_BPS_TEN, ISC_RLP_CFG_MODE_DAT10, - ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, false }, - - { V4L2_PIX_FMT_SBGGR12, MEDIA_BUS_FMT_SBGGR12_1X12, - 2, ISC_PFG_CFG0_BPS_TWELVE, ISC_RLP_CFG_MODE_DAT12, - ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, false }, - { V4L2_PIX_FMT_SGBRG12, MEDIA_BUS_FMT_SGBRG12_1X12, - 2, ISC_PFG_CFG0_BPS_TWELVE, ISC_RLP_CFG_MODE_DAT12, - ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, false }, - { V4L2_PIX_FMT_SGRBG12, MEDIA_BUS_FMT_SGRBG12_1X12, - 2, ISC_PFG_CFG0_BPS_TWELVE, ISC_RLP_CFG_MODE_DAT12, - ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, false }, - { V4L2_PIX_FMT_SRGGB12, MEDIA_BUS_FMT_SRGGB12_1X12, - 2, ISC_PFG_CFG0_BPS_TWELVE, ISC_RLP_CFG_MODE_DAT12, - ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, false }, - - { V4L2_PIX_FMT_YUYV, MEDIA_BUS_FMT_YUYV8_2X8, - 2, ISC_PFE_CFG0_BPS_EIGHT, ISC_RLP_CFG_MODE_DAT8, - ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, false }, + { V4L2_PIX_FMT_SBGGR8, MEDIA_BUS_FMT_SBGGR8_1X8, 8, + ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT8, + ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + { V4L2_PIX_FMT_SGBRG8, MEDIA_BUS_FMT_SGBRG8_1X8, 8, + ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_GBGB, ISC_RLP_CFG_MODE_DAT8, + ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + { V4L2_PIX_FMT_SGRBG8, MEDIA_BUS_FMT_SGRBG8_1X8, 8, + ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_GRGR, ISC_RLP_CFG_MODE_DAT8, + ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + { V4L2_PIX_FMT_SRGGB8, MEDIA_BUS_FMT_SRGGB8_1X8, 8, + ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_RGRG, ISC_RLP_CFG_MODE_DAT8, + ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + + { V4L2_PIX_FMT_SBGGR10, MEDIA_BUS_FMT_SBGGR10_1X10, 16, + ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT10, + ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + { V4L2_PIX_FMT_SGBRG10, MEDIA_BUS_FMT_SGBRG10_1X10, 16, + ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_GBGB, ISC_RLP_CFG_MODE_DAT10, + ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + { V4L2_PIX_FMT_SGRBG10, MEDIA_BUS_FMT_SGRBG10_1X10, 16, + ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_GRGR, ISC_RLP_CFG_MODE_DAT10, + ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + { V4L2_PIX_FMT_SRGGB10, MEDIA_BUS_FMT_SRGGB10_1X10, 16, + ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_RGRG, ISC_RLP_CFG_MODE_DAT10, + ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + + { V4L2_PIX_FMT_SBGGR12, MEDIA_BUS_FMT_SBGGR12_1X12, 16, + ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT12, + ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + { V4L2_PIX_FMT_SGBRG12, MEDIA_BUS_FMT_SGBRG12_1X12, 16, + ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_GBGB, ISC_RLP_CFG_MODE_DAT12, + ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + { V4L2_PIX_FMT_SGRBG12, MEDIA_BUS_FMT_SGRBG12_1X12, 16, + ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_GRGR, ISC_RLP_CFG_MODE_DAT12, + ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + { V4L2_PIX_FMT_SRGGB12, MEDIA_BUS_FMT_SRGGB12_1X12, 16, + ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_RGRG, ISC_RLP_CFG_MODE_DAT12, + ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, + + { V4L2_PIX_FMT_YUV420, 0x0, 12, + ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC, + ISC_DCFG_IMODE_YC420P | ISC_DCFG_YMBSIZE_BEATS8 | + ISC_DCFG_CMBSIZE_BEATS8, ISC_DCTRL_DVIEW_PLANAR, 0x7fb, + false, false }, + { V4L2_PIX_FMT_YUV422P, 0x0, 16, + ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC, + ISC_DCFG_IMODE_YC422P | ISC_DCFG_YMBSIZE_BEATS8 | + ISC_DCFG_CMBSIZE_BEATS8, ISC_DCTRL_DVIEW_PLANAR, 0x3fb, + false, false }, + { V4L2_PIX_FMT_RGB565, MEDIA_BUS_FMT_RGB565_2X8_LE, 16, + ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_RGB565, + ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x7b, + false, false }, + + { V4L2_PIX_FMT_YUYV, MEDIA_BUS_FMT_YUYV8_2X8, 16, + ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT8, + ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0, + false, false }, +}; + +#define GAMMA_MAX 2 +#define GAMMA_ENTRIES 64 + +/* Gamma table with gamma 1/2.2 */ +static const u32 isc_gamma_table[GAMMA_MAX + 1][GAMMA_ENTRIES] = { + /* 0 --> gamma 1/1.8 */ + { 0x65, 0x66002F, 0x950025, 0xBB0020, 0xDB001D, 0xF8001A, + 0x1130018, 0x12B0017, 0x1420016, 0x1580014, 0x16D0013, 0x1810012, + 0x1940012, 0x1A60012, 0x1B80011, 0x1C90010, 0x1DA0010, 0x1EA000F, + 0x1FA000F, 0x209000F, 0x218000F, 0x227000E, 0x235000E, 0x243000E, + 0x251000E, 0x25F000D, 0x26C000D, 0x279000D, 0x286000D, 0x293000C, + 0x2A0000C, 0x2AC000C, 0x2B8000C, 0x2C4000C, 0x2D0000B, 0x2DC000B, + 0x2E7000B, 0x2F3000B, 0x2FE000B, 0x309000B, 0x314000B, 0x31F000A, + 0x32A000A, 0x334000B, 0x33F000A, 0x349000A, 0x354000A, 0x35E000A, + 0x368000A, 0x372000A, 0x37C000A, 0x386000A, 0x3900009, 0x399000A, + 0x3A30009, 0x3AD0009, 0x3B60009, 0x3BF000A, 0x3C90009, 0x3D20009, + 0x3DB0009, 0x3E40009, 0x3ED0009, 0x3F60009 }, + + /* 1 --> gamma 1/2 */ + { 0x7F, 0x800034, 0xB50028, 0xDE0021, 0x100001E, 0x11E001B, + 0x1390019, 0x1520017, 0x16A0015, 0x1800014, 0x1940014, 0x1A80013, + 0x1BB0012, 0x1CD0011, 0x1DF0010, 0x1EF0010, 0x200000F, 0x20F000F, + 0x21F000E, 0x22D000F, 0x23C000E, 0x24A000E, 0x258000D, 0x265000D, + 0x273000C, 0x27F000D, 0x28C000C, 0x299000C, 0x2A5000C, 0x2B1000B, + 0x2BC000C, 0x2C8000B, 0x2D3000C, 0x2DF000B, 0x2EA000A, 0x2F5000A, + 0x2FF000B, 0x30A000A, 0x314000B, 0x31F000A, 0x329000A, 0x333000A, + 0x33D0009, 0x3470009, 0x350000A, 0x35A0009, 0x363000A, 0x36D0009, + 0x3760009, 0x37F0009, 0x3880009, 0x3910009, 0x39A0009, 0x3A30009, + 0x3AC0008, 0x3B40009, 0x3BD0008, 0x3C60008, 0x3CE0008, 0x3D60009, + 0x3DF0008, 0x3E70008, 0x3EF0008, 0x3F70008 }, + + /* 2 --> gamma 1/2.2 */ + { 0x99, 0x9B0038, 0xD4002A, 0xFF0023, 0x122001F, 0x141001B, + 0x15D0019, 0x1760017, 0x18E0015, 0x1A30015, 0x1B80013, 0x1CC0012, + 0x1DE0011, 0x1F00010, 0x2010010, 0x2110010, 0x221000F, 0x230000F, + 0x23F000E, 0x24D000E, 0x25B000D, 0x269000C, 0x276000C, 0x283000C, + 0x28F000C, 0x29B000C, 0x2A7000C, 0x2B3000B, 0x2BF000B, 0x2CA000B, + 0x2D5000B, 0x2E0000A, 0x2EB000A, 0x2F5000A, 0x2FF000A, 0x30A000A, + 0x3140009, 0x31E0009, 0x327000A, 0x3310009, 0x33A0009, 0x3440009, + 0x34D0009, 0x3560009, 0x35F0009, 0x3680008, 0x3710008, 0x3790009, + 0x3820008, 0x38A0008, 0x3930008, 0x39B0008, 0x3A30008, 0x3AB0008, + 0x3B30008, 0x3BB0008, 0x3C30008, 0x3CB0007, 0x3D20008, 0x3DA0007, + 0x3E20007, 0x3E90007, 0x3F00008, 0x3F80007 }, }; +static unsigned int sensor_preferred = 1; +module_param(sensor_preferred, uint, 0644); +MODULE_PARM_DESC(sensor_preferred, + "Sensor is preferred to output the specified format (1-on 0-off), default 1"); + static int isc_clk_enable(struct clk_hw *hw) { struct isc_clk *isc_clk = to_isc_clk(hw); @@ -447,27 +570,155 @@ static int isc_buffer_prepare(struct vb2_buffer *vb) return 0; } -static inline void isc_start_dma(struct regmap *regmap, - struct isc_buffer *frm, u32 dview) +static inline bool sensor_is_preferred(const struct isc_format *isc_fmt) +{ + return (sensor_preferred && isc_fmt->sd_support) || + !isc_fmt->isc_support; +} + +static void isc_start_dma(struct isc_device *isc) { - dma_addr_t addr; + struct regmap *regmap = isc->regmap; + struct v4l2_pix_format *pixfmt = &isc->fmt.fmt.pix; + u32 sizeimage = pixfmt->sizeimage; + u32 dctrl_dview; + dma_addr_t addr0; + + addr0 = vb2_dma_contig_plane_dma_addr(&isc->cur_frm->vb.vb2_buf, 0); + regmap_write(regmap, ISC_DAD0, addr0); + + switch (pixfmt->pixelformat) { + case V4L2_PIX_FMT_YUV420: + regmap_write(regmap, ISC_DAD1, addr0 + (sizeimage * 2) / 3); + regmap_write(regmap, ISC_DAD2, addr0 + (sizeimage * 5) / 6); + break; + case V4L2_PIX_FMT_YUV422P: + regmap_write(regmap, ISC_DAD1, addr0 + sizeimage / 2); + regmap_write(regmap, ISC_DAD2, addr0 + (sizeimage * 3) / 4); + break; + default: + break; + } - addr = vb2_dma_contig_plane_dma_addr(&frm->vb.vb2_buf, 0); + if (sensor_is_preferred(isc->current_fmt)) + dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + else + dctrl_dview = isc->current_fmt->reg_dctrl_dview; - regmap_write(regmap, ISC_DCTRL, dview | ISC_DCTRL_IE_IS); - regmap_write(regmap, ISC_DAD0, addr); + regmap_write(regmap, ISC_DCTRL, dctrl_dview | ISC_DCTRL_IE_IS); regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_CAPTURE); } static void isc_set_pipeline(struct isc_device *isc, u32 pipeline) { - u32 val; + struct regmap *regmap = isc->regmap; + struct isc_ctrls *ctrls = &isc->ctrls; + u32 val, bay_cfg; + const u32 *gamma; unsigned int i; + /* WB-->CFA-->CC-->GAM-->CSC-->CBC-->SUB422-->SUB420 */ for (i = 0; i < ISC_PIPE_LINE_NODE_NUM; i++) { val = pipeline & BIT(i) ? 1 : 0; regmap_field_write(isc->pipeline[i], val); } + + if (!pipeline) + return; + + bay_cfg = isc->raw_fmt->reg_bay_cfg; + + regmap_write(regmap, ISC_WB_CFG, bay_cfg); + regmap_write(regmap, ISC_WB_O_RGR, 0x0); + regmap_write(regmap, ISC_WB_O_BGR, 0x0); + regmap_write(regmap, ISC_WB_G_RGR, ctrls->r_gain | (0x1 << 25)); + regmap_write(regmap, ISC_WB_G_BGR, ctrls->b_gain | (0x1 << 25)); + + regmap_write(regmap, ISC_CFA_CFG, bay_cfg | ISC_CFA_CFG_EITPOL); + + gamma = &isc_gamma_table[ctrls->gamma_index][0]; + regmap_bulk_write(regmap, ISC_GAM_BENTRY, gamma, GAMMA_ENTRIES); + regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES); + regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES); + + /* Convert RGB to YUV */ + regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16)); + regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16)); + regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16)); + regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16)); + regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16)); + regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16)); + + regmap_write(regmap, ISC_CBC_BRIGHT, ctrls->brightness); + regmap_write(regmap, ISC_CBC_CONTRAST, ctrls->contrast); +} + +static int isc_update_profile(struct isc_device *isc) +{ + struct regmap *regmap = isc->regmap; + u32 sr; + int counter = 100; + + regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_UPPRO); + + regmap_read(regmap, ISC_CTRLSR, &sr); + while ((sr & ISC_CTRL_UPPRO) && counter--) { + usleep_range(1000, 2000); + regmap_read(regmap, ISC_CTRLSR, &sr); + } + + if (counter < 0) { + v4l2_warn(&isc->v4l2_dev, "Time out to update profie\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static void isc_set_histogram(struct isc_device *isc) +{ + struct regmap *regmap = isc->regmap; + struct isc_ctrls *ctrls = &isc->ctrls; + + if (ctrls->awb && (ctrls->hist_stat != HIST_ENABLED)) { + regmap_write(regmap, ISC_HIS_CFG, ISC_HIS_CFG_MODE_R | + (isc->raw_fmt->reg_bay_cfg << ISC_HIS_CFG_BAYSEL_SHIFT) | + ISC_HIS_CFG_RAR); + regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_EN); + regmap_write(regmap, ISC_INTEN, ISC_INT_HISDONE); + ctrls->hist_id = ISC_HIS_CFG_MODE_R; + isc_update_profile(isc); + regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_HISREQ); + + ctrls->hist_stat = HIST_ENABLED; + } else if (!ctrls->awb && (ctrls->hist_stat != HIST_DISABLED)) { + regmap_write(regmap, ISC_INTDIS, ISC_INT_HISDONE); + regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_DIS); + + ctrls->hist_stat = HIST_DISABLED; + } +} + +static inline void isc_get_param(const struct isc_format *fmt, + u32 *rlp_mode, u32 *dcfg_imode) +{ + switch (fmt->fourcc) { + case V4L2_PIX_FMT_SBGGR10: + case V4L2_PIX_FMT_SGBRG10: + case V4L2_PIX_FMT_SGRBG10: + case V4L2_PIX_FMT_SRGGB10: + case V4L2_PIX_FMT_SBGGR12: + case V4L2_PIX_FMT_SGBRG12: + case V4L2_PIX_FMT_SGRBG12: + case V4L2_PIX_FMT_SRGGB12: + *rlp_mode = fmt->reg_rlp_mode; + *dcfg_imode = fmt->reg_dcfg_imode; + break; + default: + *rlp_mode = ISC_RLP_CFG_MODE_DAT8; + *dcfg_imode = ISC_DCFG_IMODE_PACKED8; + break; + } } static int isc_configure(struct isc_device *isc) @@ -475,39 +726,40 @@ static int isc_configure(struct isc_device *isc) struct regmap *regmap = isc->regmap; const struct isc_format *current_fmt = isc->current_fmt; struct isc_subdev_entity *subdev = isc->current_subdev; - u32 val, mask; - int counter = 10; + u32 pfe_cfg0, rlp_mode, dcfg_imode, mask, pipeline; + + if (sensor_is_preferred(current_fmt)) { + pfe_cfg0 = current_fmt->reg_bps; + pipeline = 0x0; + isc_get_param(current_fmt, &rlp_mode, &dcfg_imode); + isc->ctrls.hist_stat = HIST_INIT; + } else { + pfe_cfg0 = isc->raw_fmt->reg_bps; + pipeline = current_fmt->pipeline; + rlp_mode = current_fmt->reg_rlp_mode; + dcfg_imode = current_fmt->reg_dcfg_imode; + } - val = current_fmt->reg_bps | subdev->pfe_cfg0 | - ISC_PFE_CFG0_MODE_PROGRESSIVE; + pfe_cfg0 |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE; mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW | ISC_PFE_CFG0_VPOL_LOW | ISC_PFE_CFG0_PPOL_LOW | ISC_PFE_CFG0_MODE_MASK; - regmap_update_bits(regmap, ISC_PFE_CFG0, mask, val); + regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0); regmap_update_bits(regmap, ISC_RLP_CFG, ISC_RLP_CFG_MODE_MASK, - current_fmt->reg_rlp_mode); + rlp_mode); - regmap_update_bits(regmap, ISC_DCFG, ISC_DCFG_IMODE_MASK, - current_fmt->reg_dcfg_imode); + regmap_update_bits(regmap, ISC_DCFG, ISC_DCFG_IMODE_MASK, dcfg_imode); - /* Disable the pipeline */ - isc_set_pipeline(isc, 0x0); + /* Set the pipeline */ + isc_set_pipeline(isc, pipeline); - /* Update profile */ - regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_UPPRO); - - regmap_read(regmap, ISC_CTRLSR, &val); - while ((val & ISC_CTRL_UPPRO) && counter--) { - usleep_range(1000, 2000); - regmap_read(regmap, ISC_CTRLSR, &val); - } + if (pipeline) + isc_set_histogram(isc); - if (counter < 0) - return -ETIMEDOUT; - - return 0; + /* Update profile */ + return isc_update_profile(isc); } static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) @@ -517,7 +769,6 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) struct isc_buffer *buf; unsigned long flags; int ret; - u32 val; /* Enable stream on the sub device */ ret = v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 1); @@ -528,12 +779,6 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) pm_runtime_get_sync(isc->dev); - /* Disable all the interrupts */ - regmap_write(isc->regmap, ISC_INTDIS, (u32)~0UL); - - /* Clean the interrupt status register */ - regmap_read(regmap, ISC_INTSR, &val); - ret = isc_configure(isc); if (unlikely(ret)) goto err_configure; @@ -551,7 +796,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) struct isc_buffer, list); list_del(&isc->cur_frm->list); - isc_start_dma(regmap, isc->cur_frm, isc->current_fmt->reg_dctrl_dview); + isc_start_dma(isc); spin_unlock_irqrestore(&isc->dma_queue_lock, flags); @@ -620,8 +865,7 @@ static void isc_buffer_queue(struct vb2_buffer *vb) if (!isc->cur_frm && list_empty(&isc->dma_queue) && vb2_is_streaming(vb->vb2_queue)) { isc->cur_frm = buf; - isc_start_dma(isc->regmap, isc->cur_frm, - isc->current_fmt->reg_dctrl_dview); + isc_start_dma(isc); } else list_add_tail(&buf->list, &isc->dma_queue); spin_unlock_irqrestore(&isc->dma_queue_lock, flags); @@ -691,13 +935,14 @@ static struct isc_format *find_format_by_fourcc(struct isc_device *isc, } static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f, - struct isc_format **current_fmt) + struct isc_format **current_fmt, u32 *code) { struct isc_format *isc_fmt; struct v4l2_pix_format *pixfmt = &f->fmt.pix; struct v4l2_subdev_format format = { .which = V4L2_SUBDEV_FORMAT_TRY, }; + u32 mbus_code; int ret; if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) @@ -717,7 +962,12 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f, if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT) pixfmt->height = ISC_MAX_SUPPORT_HEIGHT; - v4l2_fill_mbus_format(&format.format, pixfmt, isc_fmt->mbus_code); + if (sensor_is_preferred(isc_fmt)) + mbus_code = isc_fmt->mbus_code; + else + mbus_code = isc->raw_fmt->mbus_code; + + v4l2_fill_mbus_format(&format.format, pixfmt, mbus_code); ret = v4l2_subdev_call(isc->current_subdev->sd, pad, set_fmt, isc->current_subdev->config, &format); if (ret < 0) @@ -726,12 +976,15 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f, v4l2_fill_pix_format(pixfmt, &format.format); pixfmt->field = V4L2_FIELD_NONE; - pixfmt->bytesperline = pixfmt->width * isc_fmt->bpp; + pixfmt->bytesperline = (pixfmt->width * isc_fmt->bpp) >> 3; pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; if (current_fmt) *current_fmt = isc_fmt; + if (code) + *code = mbus_code; + return 0; } @@ -741,14 +994,14 @@ static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f) .which = V4L2_SUBDEV_FORMAT_ACTIVE, }; struct isc_format *current_fmt; + u32 mbus_code; int ret; - ret = isc_try_fmt(isc, f, ¤t_fmt); + ret = isc_try_fmt(isc, f, ¤t_fmt, &mbus_code); if (ret) return ret; - v4l2_fill_mbus_format(&format.format, &f->fmt.pix, - current_fmt->mbus_code); + v4l2_fill_mbus_format(&format.format, &f->fmt.pix, mbus_code); ret = v4l2_subdev_call(isc->current_subdev->sd, pad, set_fmt, NULL, &format); if (ret < 0) @@ -776,7 +1029,7 @@ static int isc_try_fmt_vid_cap(struct file *file, void *priv, { struct isc_device *isc = video_drvdata(file); - return isc_try_fmt(isc, f, NULL); + return isc_try_fmt(isc, f, NULL, NULL); } static int isc_enum_input(struct file *file, void *priv, @@ -842,7 +1095,10 @@ static int isc_enum_framesizes(struct file *file, void *fh, if (!isc_fmt) return -EINVAL; - fse.code = isc_fmt->mbus_code; + if (sensor_is_preferred(isc_fmt)) + fse.code = isc_fmt->mbus_code; + else + fse.code = isc->raw_fmt->mbus_code; ret = v4l2_subdev_call(isc->current_subdev->sd, pad, enum_frame_size, NULL, &fse); @@ -873,7 +1129,10 @@ static int isc_enum_frameintervals(struct file *file, void *fh, if (!isc_fmt) return -EINVAL; - fie.code = isc_fmt->mbus_code; + if (sensor_is_preferred(isc_fmt)) + fie.code = isc_fmt->mbus_code; + else + fie.code = isc->raw_fmt->mbus_code; ret = v4l2_subdev_call(isc->current_subdev->sd, pad, enum_frame_interval, NULL, &fie); @@ -911,6 +1170,10 @@ static const struct v4l2_ioctl_ops isc_ioctl_ops = { .vidioc_s_parm = isc_s_parm, .vidioc_enum_framesizes = isc_enum_framesizes, .vidioc_enum_frameintervals = isc_enum_frameintervals, + + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; static int isc_open(struct file *file) @@ -984,14 +1247,13 @@ static irqreturn_t isc_interrupt(int irq, void *dev_id) u32 isc_intsr, isc_intmask, pending; irqreturn_t ret = IRQ_NONE; - spin_lock(&isc->dma_queue_lock); - regmap_read(regmap, ISC_INTSR, &isc_intsr); regmap_read(regmap, ISC_INTMASK, &isc_intmask); pending = isc_intsr & isc_intmask; if (likely(pending & ISC_INT_DDONE)) { + spin_lock(&isc->dma_queue_lock); if (isc->cur_frm) { struct vb2_v4l2_buffer *vbuf = &isc->cur_frm->vb; struct vb2_buffer *vb = &vbuf->vb2_buf; @@ -1007,21 +1269,144 @@ static irqreturn_t isc_interrupt(int irq, void *dev_id) struct isc_buffer, list); list_del(&isc->cur_frm->list); - isc_start_dma(regmap, isc->cur_frm, - isc->current_fmt->reg_dctrl_dview); + isc_start_dma(isc); } if (isc->stop) complete(&isc->comp); ret = IRQ_HANDLED; + spin_unlock(&isc->dma_queue_lock); } - spin_unlock(&isc->dma_queue_lock); + if (pending & ISC_INT_HISDONE) { + schedule_work(&isc->awb_work); + ret = IRQ_HANDLED; + } return ret; } +static void isc_hist_count(struct isc_device *isc) +{ + struct regmap *regmap = isc->regmap; + struct isc_ctrls *ctrls = &isc->ctrls; + u32 *hist_count = &ctrls->hist_count[ctrls->hist_id]; + u32 *hist_entry = &ctrls->hist_entry[0]; + u32 i; + + regmap_bulk_read(regmap, ISC_HIS_ENTRY, hist_entry, HIST_ENTRIES); + + *hist_count = 0; + for (i = 0; i < HIST_ENTRIES; i++) + *hist_count += i * (*hist_entry++); +} + +static void isc_wb_update(struct isc_ctrls *ctrls) +{ + u32 *hist_count = &ctrls->hist_count[0]; + u64 g_count = (u64)hist_count[ISC_HIS_CFG_MODE_GB] << 9; + u32 hist_r = hist_count[ISC_HIS_CFG_MODE_R]; + u32 hist_b = hist_count[ISC_HIS_CFG_MODE_B]; + + if (hist_r) + ctrls->r_gain = div_u64(g_count, hist_r); + + if (hist_b) + ctrls->b_gain = div_u64(g_count, hist_b); +} + +static void isc_awb_work(struct work_struct *w) +{ + struct isc_device *isc = + container_of(w, struct isc_device, awb_work); + struct regmap *regmap = isc->regmap; + struct isc_ctrls *ctrls = &isc->ctrls; + u32 hist_id = ctrls->hist_id; + u32 baysel; + + if (ctrls->hist_stat != HIST_ENABLED) + return; + + isc_hist_count(isc); + + if (hist_id != ISC_HIS_CFG_MODE_B) { + hist_id++; + } else { + isc_wb_update(ctrls); + hist_id = ISC_HIS_CFG_MODE_R; + } + + ctrls->hist_id = hist_id; + baysel = isc->raw_fmt->reg_bay_cfg << ISC_HIS_CFG_BAYSEL_SHIFT; + + pm_runtime_get_sync(isc->dev); + + regmap_write(regmap, ISC_HIS_CFG, hist_id | baysel | ISC_HIS_CFG_RAR); + isc_update_profile(isc); + regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_HISREQ); + + pm_runtime_put_sync(isc->dev); +} + +static int isc_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct isc_device *isc = container_of(ctrl->handler, + struct isc_device, ctrls.handler); + struct isc_ctrls *ctrls = &isc->ctrls; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrls->brightness = ctrl->val & ISC_CBC_BRIGHT_MASK; + break; + case V4L2_CID_CONTRAST: + ctrls->contrast = ctrl->val & ISC_CBC_CONTRAST_MASK; + break; + case V4L2_CID_GAMMA: + ctrls->gamma_index = ctrl->val; + break; + case V4L2_CID_AUTO_WHITE_BALANCE: + ctrls->awb = ctrl->val; + if (ctrls->hist_stat != HIST_ENABLED) { + ctrls->r_gain = 0x1 << 9; + ctrls->b_gain = 0x1 << 9; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct v4l2_ctrl_ops isc_ctrl_ops = { + .s_ctrl = isc_s_ctrl, +}; + +static int isc_ctrl_init(struct isc_device *isc) +{ + const struct v4l2_ctrl_ops *ops = &isc_ctrl_ops; + struct isc_ctrls *ctrls = &isc->ctrls; + struct v4l2_ctrl_handler *hdl = &ctrls->handler; + int ret; + + ctrls->hist_stat = HIST_INIT; + + ret = v4l2_ctrl_handler_init(hdl, 4); + if (ret < 0) + return ret; + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -1024, 1023, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, GAMMA_MAX, 1, 2); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); + + v4l2_ctrl_handler_setup(hdl); + + return 0; +} + + static int isc_async_bound(struct v4l2_async_notifier *notifier, struct v4l2_subdev *subdev, struct v4l2_async_subdev *asd) @@ -1047,10 +1432,11 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier, { struct isc_device *isc = container_of(notifier->v4l2_dev, struct isc_device, v4l2_dev); - + cancel_work_sync(&isc->awb_work); video_unregister_device(&isc->video_dev); if (isc->current_subdev->config) v4l2_subdev_free_pad_config(isc->current_subdev->config); + v4l2_ctrl_handler_free(&isc->ctrls.handler); } static struct isc_format *find_format_by_code(unsigned int code, int *index) @@ -1074,14 +1460,16 @@ static int isc_formats_init(struct isc_device *isc) { struct isc_format *fmt; struct v4l2_subdev *subdev = isc->current_subdev->sd; - int num_fmts = 0, i, j; + unsigned int num_fmts, i, j; struct v4l2_subdev_mbus_code_enum mbus_code = { .which = V4L2_SUBDEV_FORMAT_ACTIVE, }; fmt = &isc_formats[0]; for (i = 0; i < ARRAY_SIZE(isc_formats); i++) { - fmt->support = false; + fmt->isc_support = false; + fmt->sd_support = false; + fmt++; } @@ -1092,8 +1480,22 @@ static int isc_formats_init(struct isc_device *isc) if (!fmt) continue; - fmt->support = true; - num_fmts++; + fmt->sd_support = true; + + if (i <= RAW_FMT_IND_END) { + for (j = ISC_FMT_IND_START; j <= ISC_FMT_IND_END; j++) + isc_formats[j].isc_support = true; + + isc->raw_fmt = fmt; + } + } + + fmt = &isc_formats[0]; + for (i = 0, num_fmts = 0; i < ARRAY_SIZE(isc_formats); i++) { + if (fmt->isc_support || fmt->sd_support) + num_fmts++; + + fmt++; } if (!num_fmts) @@ -1110,7 +1512,7 @@ static int isc_formats_init(struct isc_device *isc) fmt = &isc_formats[0]; for (i = 0, j = 0; i < ARRAY_SIZE(isc_formats); i++) { - if (fmt->support) + if (fmt->isc_support || fmt->sd_support) isc->user_formats[j++] = fmt; fmt++; @@ -1132,7 +1534,7 @@ static int isc_set_default_fmt(struct isc_device *isc) }; int ret; - ret = isc_try_fmt(isc, &f, NULL); + ret = isc_try_fmt(isc, &f, NULL, NULL); if (ret) return ret; @@ -1151,6 +1553,12 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier) struct vb2_queue *q = &isc->vb2_vidq; int ret; + ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev); + if (ret < 0) { + v4l2_err(&isc->v4l2_dev, "Failed to register subdev nodes\n"); + return ret; + } + isc->current_subdev = container_of(notifier, struct isc_subdev_entity, notifier); sd_entity = isc->current_subdev; @@ -1198,6 +1606,14 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier) return ret; } + ret = isc_ctrl_init(isc); + if (ret) { + v4l2_err(&isc->v4l2_dev, "Init isc ctrols failed: %d\n", ret); + return ret; + } + + INIT_WORK(&isc->awb_work, isc_awb_work); + /* Register video device */ strlcpy(vdev->name, ATMEL_ISC_NAME, sizeof(vdev->name)); vdev->release = video_device_release_empty; @@ -1207,7 +1623,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier) vdev->vfl_dir = VFL_DIR_RX; vdev->queue = q; vdev->lock = &isc->lock; - vdev->ctrl_handler = isc->current_subdev->sd->ctrl_handler; + vdev->ctrl_handler = &isc->ctrls.handler; vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE; video_set_drvdata(vdev, isc); diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c new file mode 100644 index 000000000000..e4867f84514c --- /dev/null +++ b/drivers/media/platform/atmel/atmel-isi.c @@ -0,0 +1,1368 @@ +/* + * Copyright (c) 2011 Atmel Corporation + * Josh Wu, <josh.wu@atmel.com> + * + * Based on previous work by Lars Haring, <lars.haring@atmel.com> + * and Sedji Gaouaou + * Based on the bttv driver for Bt848 with respective copyright holders + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-event.h> +#include <media/v4l2-of.h> +#include <media/videobuf2-dma-contig.h> +#include <media/v4l2-image-sizes.h> + +#include "atmel-isi.h" + +#define MAX_SUPPORT_WIDTH 2048 +#define MAX_SUPPORT_HEIGHT 2048 +#define MIN_FRAME_RATE 15 +#define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE) + +/* Frame buffer descriptor */ +struct fbd { + /* Physical address of the frame buffer */ + u32 fb_address; + /* DMA Control Register(only in HISI2) */ + u32 dma_ctrl; + /* Physical address of the next fbd */ + u32 next_fbd_address; +}; + +static void set_dma_ctrl(struct fbd *fb_desc, u32 ctrl) +{ + fb_desc->dma_ctrl = ctrl; +} + +struct isi_dma_desc { + struct list_head list; + struct fbd *p_fbd; + dma_addr_t fbd_phys; +}; + +/* Frame buffer data */ +struct frame_buffer { + struct vb2_v4l2_buffer vb; + struct isi_dma_desc *p_dma_desc; + struct list_head list; +}; + +struct isi_graph_entity { + struct device_node *node; + + struct v4l2_async_subdev asd; + struct v4l2_subdev *subdev; +}; + +/* + * struct isi_format - ISI media bus format information + * @fourcc: Fourcc code for this format + * @mbus_code: V4L2 media bus format code. + * @bpp: Bytes per pixel (when stored in memory) + * @swap: Byte swap configuration value + * @support: Indicates format supported by subdev + * @skip: Skip duplicate format supported by subdev + */ +struct isi_format { + u32 fourcc; + u32 mbus_code; + u8 bpp; + u32 swap; +}; + + +struct atmel_isi { + /* Protects the access of variables shared with the ISR */ + spinlock_t irqlock; + struct device *dev; + void __iomem *regs; + + int sequence; + + /* Allocate descriptors for dma buffer use */ + struct fbd *p_fb_descriptors; + dma_addr_t fb_descriptors_phys; + struct list_head dma_desc_head; + struct isi_dma_desc dma_desc[VIDEO_MAX_FRAME]; + bool enable_preview_path; + + struct completion complete; + /* ISI peripherial clock */ + struct clk *pclk; + unsigned int irq; + + struct isi_platform_data pdata; + u16 width_flags; /* max 12 bits */ + + struct list_head video_buffer_list; + struct frame_buffer *active; + + struct v4l2_device v4l2_dev; + struct video_device *vdev; + struct v4l2_async_notifier notifier; + struct isi_graph_entity entity; + struct v4l2_format fmt; + + const struct isi_format **user_formats; + unsigned int num_user_formats; + const struct isi_format *current_fmt; + + struct mutex lock; + struct vb2_queue queue; +}; + +#define notifier_to_isi(n) container_of(n, struct atmel_isi, notifier) + +static void isi_writel(struct atmel_isi *isi, u32 reg, u32 val) +{ + writel(val, isi->regs + reg); +} +static u32 isi_readl(struct atmel_isi *isi, u32 reg) +{ + return readl(isi->regs + reg); +} + +static void configure_geometry(struct atmel_isi *isi) +{ + u32 cfg2, psize; + u32 fourcc = isi->current_fmt->fourcc; + + isi->enable_preview_path = fourcc == V4L2_PIX_FMT_RGB565 || + fourcc == V4L2_PIX_FMT_RGB32; + + /* According to sensor's output format to set cfg2 */ + cfg2 = isi->current_fmt->swap; + + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); + /* Set width */ + cfg2 |= ((isi->fmt.fmt.pix.width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) & + ISI_CFG2_IM_HSIZE_MASK; + /* Set height */ + cfg2 |= ((isi->fmt.fmt.pix.height - 1) << ISI_CFG2_IM_VSIZE_OFFSET) + & ISI_CFG2_IM_VSIZE_MASK; + isi_writel(isi, ISI_CFG2, cfg2); + + /* No down sampling, preview size equal to sensor output size */ + psize = ((isi->fmt.fmt.pix.width - 1) << ISI_PSIZE_PREV_HSIZE_OFFSET) & + ISI_PSIZE_PREV_HSIZE_MASK; + psize |= ((isi->fmt.fmt.pix.height - 1) << ISI_PSIZE_PREV_VSIZE_OFFSET) & + ISI_PSIZE_PREV_VSIZE_MASK; + isi_writel(isi, ISI_PSIZE, psize); + isi_writel(isi, ISI_PDECF, ISI_PDECF_NO_SAMPLING); +} + +static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi) +{ + if (isi->active) { + struct vb2_v4l2_buffer *vbuf = &isi->active->vb; + struct frame_buffer *buf = isi->active; + + list_del_init(&buf->list); + vbuf->vb2_buf.timestamp = ktime_get_ns(); + vbuf->sequence = isi->sequence++; + vbuf->field = V4L2_FIELD_NONE; + vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_DONE); + } + + if (list_empty(&isi->video_buffer_list)) { + isi->active = NULL; + } else { + /* start next dma frame. */ + isi->active = list_entry(isi->video_buffer_list.next, + struct frame_buffer, list); + if (!isi->enable_preview_path) { + isi_writel(isi, ISI_DMA_C_DSCR, + (u32)isi->active->p_dma_desc->fbd_phys); + isi_writel(isi, ISI_DMA_C_CTRL, + ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); + isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH); + } else { + isi_writel(isi, ISI_DMA_P_DSCR, + (u32)isi->active->p_dma_desc->fbd_phys); + isi_writel(isi, ISI_DMA_P_CTRL, + ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); + isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_P_CH); + } + } + return IRQ_HANDLED; +} + +/* ISI interrupt service routine */ +static irqreturn_t isi_interrupt(int irq, void *dev_id) +{ + struct atmel_isi *isi = dev_id; + u32 status, mask, pending; + irqreturn_t ret = IRQ_NONE; + + spin_lock(&isi->irqlock); + + status = isi_readl(isi, ISI_STATUS); + mask = isi_readl(isi, ISI_INTMASK); + pending = status & mask; + + if (pending & ISI_CTRL_SRST) { + complete(&isi->complete); + isi_writel(isi, ISI_INTDIS, ISI_CTRL_SRST); + ret = IRQ_HANDLED; + } else if (pending & ISI_CTRL_DIS) { + complete(&isi->complete); + isi_writel(isi, ISI_INTDIS, ISI_CTRL_DIS); + ret = IRQ_HANDLED; + } else { + if (likely(pending & ISI_SR_CXFR_DONE) || + likely(pending & ISI_SR_PXFR_DONE)) + ret = atmel_isi_handle_streaming(isi); + } + + spin_unlock(&isi->irqlock); + return ret; +} + +#define WAIT_ISI_RESET 1 +#define WAIT_ISI_DISABLE 0 +static int atmel_isi_wait_status(struct atmel_isi *isi, int wait_reset) +{ + unsigned long timeout; + /* + * The reset or disable will only succeed if we have a + * pixel clock from the camera. + */ + init_completion(&isi->complete); + + if (wait_reset) { + isi_writel(isi, ISI_INTEN, ISI_CTRL_SRST); + isi_writel(isi, ISI_CTRL, ISI_CTRL_SRST); + } else { + isi_writel(isi, ISI_INTEN, ISI_CTRL_DIS); + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); + } + + timeout = wait_for_completion_timeout(&isi->complete, + msecs_to_jiffies(500)); + if (timeout == 0) + return -ETIMEDOUT; + + return 0; +} + +/* ------------------------------------------------------------------ + Videobuf operations + ------------------------------------------------------------------*/ +static int queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], struct device *alloc_devs[]) +{ + struct atmel_isi *isi = vb2_get_drv_priv(vq); + unsigned long size; + + size = isi->fmt.fmt.pix.sizeimage; + + /* Make sure the image size is large enough. */ + if (*nplanes) + return sizes[0] < size ? -EINVAL : 0; + + *nplanes = 1; + sizes[0] = size; + + isi->active = NULL; + + dev_dbg(isi->dev, "%s, count=%d, size=%ld\n", __func__, + *nbuffers, size); + + return 0; +} + +static int buffer_init(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct frame_buffer *buf = container_of(vbuf, struct frame_buffer, vb); + + buf->p_dma_desc = NULL; + INIT_LIST_HEAD(&buf->list); + + return 0; +} + +static int buffer_prepare(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct frame_buffer *buf = container_of(vbuf, struct frame_buffer, vb); + struct atmel_isi *isi = vb2_get_drv_priv(vb->vb2_queue); + unsigned long size; + struct isi_dma_desc *desc; + + size = isi->fmt.fmt.pix.sizeimage; + + if (vb2_plane_size(vb, 0) < size) { + dev_err(isi->dev, "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), size); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, size); + + if (!buf->p_dma_desc) { + if (list_empty(&isi->dma_desc_head)) { + dev_err(isi->dev, "Not enough dma descriptors.\n"); + return -EINVAL; + } else { + /* Get an available descriptor */ + desc = list_entry(isi->dma_desc_head.next, + struct isi_dma_desc, list); + /* Delete the descriptor since now it is used */ + list_del_init(&desc->list); + + /* Initialize the dma descriptor */ + desc->p_fbd->fb_address = + vb2_dma_contig_plane_dma_addr(vb, 0); + desc->p_fbd->next_fbd_address = 0; + set_dma_ctrl(desc->p_fbd, ISI_DMA_CTRL_WB); + + buf->p_dma_desc = desc; + } + } + return 0; +} + +static void buffer_cleanup(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct atmel_isi *isi = vb2_get_drv_priv(vb->vb2_queue); + struct frame_buffer *buf = container_of(vbuf, struct frame_buffer, vb); + + /* This descriptor is available now and we add to head list */ + if (buf->p_dma_desc) + list_add(&buf->p_dma_desc->list, &isi->dma_desc_head); +} + +static void start_dma(struct atmel_isi *isi, struct frame_buffer *buffer) +{ + u32 ctrl, cfg1; + + cfg1 = isi_readl(isi, ISI_CFG1); + /* Enable irq: cxfr for the codec path, pxfr for the preview path */ + isi_writel(isi, ISI_INTEN, + ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE); + + /* Check if already in a frame */ + if (!isi->enable_preview_path) { + if (isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) { + dev_err(isi->dev, "Already in frame handling.\n"); + return; + } + + isi_writel(isi, ISI_DMA_C_DSCR, + (u32)buffer->p_dma_desc->fbd_phys); + isi_writel(isi, ISI_DMA_C_CTRL, + ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); + isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH); + } else { + isi_writel(isi, ISI_DMA_P_DSCR, + (u32)buffer->p_dma_desc->fbd_phys); + isi_writel(isi, ISI_DMA_P_CTRL, + ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); + isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_P_CH); + } + + cfg1 &= ~ISI_CFG1_FRATE_DIV_MASK; + /* Enable linked list */ + cfg1 |= isi->pdata.frate | ISI_CFG1_DISCR; + + /* Enable ISI */ + ctrl = ISI_CTRL_EN; + + if (!isi->enable_preview_path) + ctrl |= ISI_CTRL_CDC; + + isi_writel(isi, ISI_CTRL, ctrl); + isi_writel(isi, ISI_CFG1, cfg1); +} + +static void buffer_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct atmel_isi *isi = vb2_get_drv_priv(vb->vb2_queue); + struct frame_buffer *buf = container_of(vbuf, struct frame_buffer, vb); + unsigned long flags = 0; + + spin_lock_irqsave(&isi->irqlock, flags); + list_add_tail(&buf->list, &isi->video_buffer_list); + + if (isi->active == NULL) { + isi->active = buf; + if (vb2_is_streaming(vb->vb2_queue)) + start_dma(isi, buf); + } + spin_unlock_irqrestore(&isi->irqlock, flags); +} + +static int start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct atmel_isi *isi = vb2_get_drv_priv(vq); + struct frame_buffer *buf, *node; + int ret; + + /* Enable stream on the sub device */ + ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1); + if (ret && ret != -ENOIOCTLCMD) { + dev_err(isi->dev, "stream on failed in subdev\n"); + goto err_start_stream; + } + + pm_runtime_get_sync(isi->dev); + + /* Reset ISI */ + ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); + if (ret < 0) { + dev_err(isi->dev, "Reset ISI timed out\n"); + goto err_reset; + } + /* Disable all interrupts */ + isi_writel(isi, ISI_INTDIS, (u32)~0UL); + + isi->sequence = 0; + configure_geometry(isi); + + spin_lock_irq(&isi->irqlock); + /* Clear any pending interrupt */ + isi_readl(isi, ISI_STATUS); + + start_dma(isi, isi->active); + spin_unlock_irq(&isi->irqlock); + + return 0; + +err_reset: + pm_runtime_put(isi->dev); + v4l2_subdev_call(isi->entity.subdev, video, s_stream, 0); + +err_start_stream: + spin_lock_irq(&isi->irqlock); + isi->active = NULL; + /* Release all active buffers */ + list_for_each_entry_safe(buf, node, &isi->video_buffer_list, list) { + list_del_init(&buf->list); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); + } + spin_unlock_irq(&isi->irqlock); + + return ret; +} + +/* abort streaming and wait for last buffer */ +static void stop_streaming(struct vb2_queue *vq) +{ + struct atmel_isi *isi = vb2_get_drv_priv(vq); + struct frame_buffer *buf, *node; + int ret = 0; + unsigned long timeout; + + /* Disable stream on the sub device */ + ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 0); + if (ret && ret != -ENOIOCTLCMD) + dev_err(isi->dev, "stream off failed in subdev\n"); + + spin_lock_irq(&isi->irqlock); + isi->active = NULL; + /* Release all active buffers */ + list_for_each_entry_safe(buf, node, &isi->video_buffer_list, list) { + list_del_init(&buf->list); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + } + spin_unlock_irq(&isi->irqlock); + + if (!isi->enable_preview_path) { + timeout = jiffies + FRAME_INTERVAL_MILLI_SEC * HZ; + /* Wait until the end of the current frame. */ + while ((isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) && + time_before(jiffies, timeout)) + msleep(1); + + if (time_after(jiffies, timeout)) + dev_err(isi->dev, + "Timeout waiting for finishing codec request\n"); + } + + /* Disable interrupts */ + isi_writel(isi, ISI_INTDIS, + ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE); + + /* Disable ISI and wait for it is done */ + ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); + if (ret < 0) + dev_err(isi->dev, "Disable ISI timed out\n"); + + pm_runtime_put(isi->dev); +} + +static const struct vb2_ops isi_video_qops = { + .queue_setup = queue_setup, + .buf_init = buffer_init, + .buf_prepare = buffer_prepare, + .buf_cleanup = buffer_cleanup, + .buf_queue = buffer_queue, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +static int isi_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct atmel_isi *isi = video_drvdata(file); + + *fmt = isi->fmt; + + return 0; +} + +static const struct isi_format *find_format_by_fourcc(struct atmel_isi *isi, + unsigned int fourcc) +{ + unsigned int num_formats = isi->num_user_formats; + const struct isi_format *fmt; + unsigned int i; + + for (i = 0; i < num_formats; i++) { + fmt = isi->user_formats[i]; + if (fmt->fourcc == fourcc) + return fmt; + } + + return NULL; +} + +static int isi_try_fmt(struct atmel_isi *isi, struct v4l2_format *f, + const struct isi_format **current_fmt) +{ + const struct isi_format *isi_fmt; + struct v4l2_pix_format *pixfmt = &f->fmt.pix; + struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_TRY, + }; + int ret; + + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + isi_fmt = find_format_by_fourcc(isi, pixfmt->pixelformat); + if (!isi_fmt) { + isi_fmt = isi->user_formats[isi->num_user_formats - 1]; + pixfmt->pixelformat = isi_fmt->fourcc; + } + + /* Limit to Atmel ISC hardware capabilities */ + if (pixfmt->width > MAX_SUPPORT_WIDTH) + pixfmt->width = MAX_SUPPORT_WIDTH; + if (pixfmt->height > MAX_SUPPORT_HEIGHT) + pixfmt->height = MAX_SUPPORT_HEIGHT; + + v4l2_fill_mbus_format(&format.format, pixfmt, isi_fmt->mbus_code); + ret = v4l2_subdev_call(isi->entity.subdev, pad, set_fmt, + &pad_cfg, &format); + if (ret < 0) + return ret; + + v4l2_fill_pix_format(pixfmt, &format.format); + + pixfmt->field = V4L2_FIELD_NONE; + pixfmt->bytesperline = pixfmt->width * isi_fmt->bpp; + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + if (current_fmt) + *current_fmt = isi_fmt; + + return 0; +} + +static int isi_set_fmt(struct atmel_isi *isi, struct v4l2_format *f) +{ + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + const struct isi_format *current_fmt; + int ret; + + ret = isi_try_fmt(isi, f, ¤t_fmt); + if (ret) + return ret; + + v4l2_fill_mbus_format(&format.format, &f->fmt.pix, + current_fmt->mbus_code); + ret = v4l2_subdev_call(isi->entity.subdev, pad, + set_fmt, NULL, &format); + if (ret < 0) + return ret; + + isi->fmt = *f; + isi->current_fmt = current_fmt; + + return 0; +} + +static int isi_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct atmel_isi *isi = video_drvdata(file); + + if (vb2_is_streaming(&isi->queue)) + return -EBUSY; + + return isi_set_fmt(isi, f); +} + +static int isi_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct atmel_isi *isi = video_drvdata(file); + + return isi_try_fmt(isi, f, NULL); +} + +static int isi_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct atmel_isi *isi = video_drvdata(file); + + if (f->index >= isi->num_user_formats) + return -EINVAL; + + f->pixelformat = isi->user_formats[f->index]->fourcc; + return 0; +} + +static int isi_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strlcpy(cap->driver, "atmel-isi", sizeof(cap->driver)); + strlcpy(cap->card, "Atmel Image Sensor Interface", sizeof(cap->card)); + strlcpy(cap->bus_info, "platform:isi", sizeof(cap->bus_info)); + return 0; +} + +static int isi_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; + + i->type = V4L2_INPUT_TYPE_CAMERA; + strlcpy(i->name, "Camera", sizeof(i->name)); + return 0; +} + +static int isi_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int isi_s_input(struct file *file, void *priv, unsigned int i) +{ + if (i > 0) + return -EINVAL; + return 0; +} + +static int isi_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct atmel_isi *isi = video_drvdata(file); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + a->parm.capture.readbuffers = 2; + return v4l2_subdev_call(isi->entity.subdev, video, g_parm, a); +} + +static int isi_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct atmel_isi *isi = video_drvdata(file); + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + a->parm.capture.readbuffers = 2; + return v4l2_subdev_call(isi->entity.subdev, video, s_parm, a); +} + +static int isi_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + struct atmel_isi *isi = video_drvdata(file); + const struct isi_format *isi_fmt; + struct v4l2_subdev_frame_size_enum fse = { + .index = fsize->index, + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + int ret; + + isi_fmt = find_format_by_fourcc(isi, fsize->pixel_format); + if (!isi_fmt) + return -EINVAL; + + fse.code = isi_fmt->mbus_code; + + ret = v4l2_subdev_call(isi->entity.subdev, pad, enum_frame_size, + NULL, &fse); + if (ret) + return ret; + + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = fse.max_width; + fsize->discrete.height = fse.max_height; + + return 0; +} + +static int isi_enum_frameintervals(struct file *file, void *fh, + struct v4l2_frmivalenum *fival) +{ + struct atmel_isi *isi = video_drvdata(file); + const struct isi_format *isi_fmt; + struct v4l2_subdev_frame_interval_enum fie = { + .index = fival->index, + .width = fival->width, + .height = fival->height, + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + int ret; + + isi_fmt = find_format_by_fourcc(isi, fival->pixel_format); + if (!isi_fmt) + return -EINVAL; + + fie.code = isi_fmt->mbus_code; + + ret = v4l2_subdev_call(isi->entity.subdev, pad, + enum_frame_interval, NULL, &fie); + if (ret) + return ret; + + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete = fie.interval; + + return 0; +} + +static void isi_camera_set_bus_param(struct atmel_isi *isi) +{ + u32 cfg1 = 0; + + /* set bus param for ISI */ + if (isi->pdata.hsync_act_low) + cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW; + if (isi->pdata.vsync_act_low) + cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW; + if (isi->pdata.pclk_act_falling) + cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; + if (isi->pdata.has_emb_sync) + cfg1 |= ISI_CFG1_EMB_SYNC; + if (isi->pdata.full_mode) + cfg1 |= ISI_CFG1_FULL_MODE; + + cfg1 |= ISI_CFG1_THMASK_BEATS_16; + + /* Enable PM and peripheral clock before operate isi registers */ + pm_runtime_get_sync(isi->dev); + + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); + isi_writel(isi, ISI_CFG1, cfg1); + + pm_runtime_put(isi->dev); +} + +/* -----------------------------------------------------------------------*/ +static int atmel_isi_parse_dt(struct atmel_isi *isi, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct v4l2_of_endpoint ep; + int err; + + /* Default settings for ISI */ + isi->pdata.full_mode = 1; + isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL; + + np = of_graph_get_next_endpoint(np, NULL); + if (!np) { + dev_err(&pdev->dev, "Could not find the endpoint\n"); + return -EINVAL; + } + + err = v4l2_of_parse_endpoint(np, &ep); + of_node_put(np); + if (err) { + dev_err(&pdev->dev, "Could not parse the endpoint\n"); + return err; + } + + switch (ep.bus.parallel.bus_width) { + case 8: + isi->pdata.data_width_flags = ISI_DATAWIDTH_8; + break; + case 10: + isi->pdata.data_width_flags = + ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10; + break; + default: + dev_err(&pdev->dev, "Unsupported bus width: %d\n", + ep.bus.parallel.bus_width); + return -EINVAL; + } + + if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + isi->pdata.hsync_act_low = true; + if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) + isi->pdata.vsync_act_low = true; + if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) + isi->pdata.pclk_act_falling = true; + + if (ep.bus_type == V4L2_MBUS_BT656) + isi->pdata.has_emb_sync = true; + + return 0; +} + +static int isi_open(struct file *file) +{ + struct atmel_isi *isi = video_drvdata(file); + struct v4l2_subdev *sd = isi->entity.subdev; + int ret; + + if (mutex_lock_interruptible(&isi->lock)) + return -ERESTARTSYS; + + ret = v4l2_fh_open(file); + if (ret < 0) + goto unlock; + + if (!v4l2_fh_is_singular_file(file)) + goto fh_rel; + + ret = v4l2_subdev_call(sd, core, s_power, 1); + if (ret < 0 && ret != -ENOIOCTLCMD) + goto fh_rel; + + ret = isi_set_fmt(isi, &isi->fmt); + if (ret) + v4l2_subdev_call(sd, core, s_power, 0); +fh_rel: + if (ret) + v4l2_fh_release(file); +unlock: + mutex_unlock(&isi->lock); + return ret; +} + +static int isi_release(struct file *file) +{ + struct atmel_isi *isi = video_drvdata(file); + struct v4l2_subdev *sd = isi->entity.subdev; + bool fh_singular; + int ret; + + mutex_lock(&isi->lock); + + fh_singular = v4l2_fh_is_singular_file(file); + + ret = _vb2_fop_release(file, NULL); + + if (fh_singular) + v4l2_subdev_call(sd, core, s_power, 0); + + mutex_unlock(&isi->lock); + + return ret; +} + +static const struct v4l2_ioctl_ops isi_ioctl_ops = { + .vidioc_querycap = isi_querycap, + + .vidioc_try_fmt_vid_cap = isi_try_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = isi_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = isi_s_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = isi_enum_fmt_vid_cap, + + .vidioc_enum_input = isi_enum_input, + .vidioc_g_input = isi_g_input, + .vidioc_s_input = isi_s_input, + + .vidioc_g_parm = isi_g_parm, + .vidioc_s_parm = isi_s_parm, + .vidioc_enum_framesizes = isi_enum_framesizes, + .vidioc_enum_frameintervals = isi_enum_frameintervals, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_file_operations isi_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = isi_open, + .release = isi_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, + .read = vb2_fop_read, +}; + +static int isi_set_default_fmt(struct atmel_isi *isi) +{ + struct v4l2_format f = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .fmt.pix = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .field = V4L2_FIELD_NONE, + .pixelformat = isi->user_formats[0]->fourcc, + }, + }; + int ret; + + ret = isi_try_fmt(isi, &f, NULL); + if (ret) + return ret; + isi->current_fmt = isi->user_formats[0]; + isi->fmt = f; + return 0; +} + +static const struct isi_format isi_formats[] = { + { + .fourcc = V4L2_PIX_FMT_YUYV, + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, + .bpp = 2, + .swap = ISI_CFG2_YCC_SWAP_DEFAULT, + }, { + .fourcc = V4L2_PIX_FMT_YUYV, + .mbus_code = MEDIA_BUS_FMT_YVYU8_2X8, + .bpp = 2, + .swap = ISI_CFG2_YCC_SWAP_MODE_1, + }, { + .fourcc = V4L2_PIX_FMT_YUYV, + .mbus_code = MEDIA_BUS_FMT_UYVY8_2X8, + .bpp = 2, + .swap = ISI_CFG2_YCC_SWAP_MODE_2, + }, { + .fourcc = V4L2_PIX_FMT_YUYV, + .mbus_code = MEDIA_BUS_FMT_VYUY8_2X8, + .bpp = 2, + .swap = ISI_CFG2_YCC_SWAP_MODE_3, + }, { + .fourcc = V4L2_PIX_FMT_RGB565, + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, + .bpp = 2, + .swap = ISI_CFG2_YCC_SWAP_MODE_2, + }, { + .fourcc = V4L2_PIX_FMT_RGB565, + .mbus_code = MEDIA_BUS_FMT_YVYU8_2X8, + .bpp = 2, + .swap = ISI_CFG2_YCC_SWAP_MODE_3, + }, { + .fourcc = V4L2_PIX_FMT_RGB565, + .mbus_code = MEDIA_BUS_FMT_UYVY8_2X8, + .bpp = 2, + .swap = ISI_CFG2_YCC_SWAP_DEFAULT, + }, { + .fourcc = V4L2_PIX_FMT_RGB565, + .mbus_code = MEDIA_BUS_FMT_VYUY8_2X8, + .bpp = 2, + .swap = ISI_CFG2_YCC_SWAP_MODE_1, + }, +}; + +static int isi_formats_init(struct atmel_isi *isi) +{ + const struct isi_format *isi_fmts[ARRAY_SIZE(isi_formats)]; + unsigned int num_fmts = 0, i, j; + struct v4l2_subdev *subdev = isi->entity.subdev; + struct v4l2_subdev_mbus_code_enum mbus_code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + + while (!v4l2_subdev_call(subdev, pad, enum_mbus_code, + NULL, &mbus_code)) { + for (i = 0; i < ARRAY_SIZE(isi_formats); i++) { + if (isi_formats[i].mbus_code != mbus_code.code) + continue; + + /* Code supported, have we got this fourcc yet? */ + for (j = 0; j < num_fmts; j++) + if (isi_fmts[j]->fourcc == isi_formats[i].fourcc) + /* Already available */ + break; + if (j == num_fmts) + /* new */ + isi_fmts[num_fmts++] = isi_formats + i; + } + mbus_code.index++; + } + + if (!num_fmts) + return -ENXIO; + + isi->num_user_formats = num_fmts; + isi->user_formats = devm_kcalloc(isi->dev, + num_fmts, sizeof(struct isi_format *), + GFP_KERNEL); + if (!isi->user_formats) { + dev_err(isi->dev, "could not allocate memory\n"); + return -ENOMEM; + } + + memcpy(isi->user_formats, isi_fmts, + num_fmts * sizeof(struct isi_format *)); + isi->current_fmt = isi->user_formats[0]; + + return 0; +} + +static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier) +{ + struct atmel_isi *isi = notifier_to_isi(notifier); + int ret; + + isi->vdev->ctrl_handler = isi->entity.subdev->ctrl_handler; + ret = isi_formats_init(isi); + if (ret) { + dev_err(isi->dev, "No supported mediabus format found\n"); + return ret; + } + isi_camera_set_bus_param(isi); + + ret = isi_set_default_fmt(isi); + if (ret) { + dev_err(isi->dev, "Could not set default format\n"); + return ret; + } + + ret = video_register_device(isi->vdev, VFL_TYPE_GRABBER, -1); + if (ret) { + dev_err(isi->dev, "Failed to register video device\n"); + return ret; + } + + dev_dbg(isi->dev, "Device registered as %s\n", + video_device_node_name(isi->vdev)); + return 0; +} + +static void isi_graph_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_subdev *asd) +{ + struct atmel_isi *isi = notifier_to_isi(notifier); + + dev_dbg(isi->dev, "Removing %s\n", video_device_node_name(isi->vdev)); + + /* Checks internaly if vdev have been init or not */ + video_unregister_device(isi->vdev); +} + +static int isi_graph_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct atmel_isi *isi = notifier_to_isi(notifier); + + dev_dbg(isi->dev, "subdev %s bound\n", subdev->name); + + isi->entity.subdev = subdev; + + return 0; +} + +static int isi_graph_parse(struct atmel_isi *isi, struct device_node *node) +{ + struct device_node *ep = NULL; + struct device_node *remote; + + while (1) { + ep = of_graph_get_next_endpoint(node, ep); + if (!ep) + return -EINVAL; + + remote = of_graph_get_remote_port_parent(ep); + if (!remote) { + of_node_put(ep); + return -EINVAL; + } + + /* Remote node to connect */ + isi->entity.node = remote; + isi->entity.asd.match_type = V4L2_ASYNC_MATCH_OF; + isi->entity.asd.match.of.node = remote; + return 0; + } +} + +static int isi_graph_init(struct atmel_isi *isi) +{ + struct v4l2_async_subdev **subdevs = NULL; + int ret; + + /* Parse the graph to extract a list of subdevice DT nodes. */ + ret = isi_graph_parse(isi, isi->dev->of_node); + if (ret < 0) { + dev_err(isi->dev, "Graph parsing failed\n"); + return ret; + } + + /* Register the subdevices notifier. */ + subdevs = devm_kzalloc(isi->dev, sizeof(*subdevs), GFP_KERNEL); + if (subdevs == NULL) { + of_node_put(isi->entity.node); + return -ENOMEM; + } + + subdevs[0] = &isi->entity.asd; + + isi->notifier.subdevs = subdevs; + isi->notifier.num_subdevs = 1; + isi->notifier.bound = isi_graph_notify_bound; + isi->notifier.unbind = isi_graph_notify_unbind; + isi->notifier.complete = isi_graph_notify_complete; + + ret = v4l2_async_notifier_register(&isi->v4l2_dev, &isi->notifier); + if (ret < 0) { + dev_err(isi->dev, "Notifier registration failed\n"); + of_node_put(isi->entity.node); + return ret; + } + + return 0; +} + + +static int atmel_isi_probe(struct platform_device *pdev) +{ + int irq; + struct atmel_isi *isi; + struct vb2_queue *q; + struct resource *regs; + int ret, i; + + isi = devm_kzalloc(&pdev->dev, sizeof(struct atmel_isi), GFP_KERNEL); + if (!isi) { + dev_err(&pdev->dev, "Can't allocate interface!\n"); + return -ENOMEM; + } + + isi->pclk = devm_clk_get(&pdev->dev, "isi_clk"); + if (IS_ERR(isi->pclk)) + return PTR_ERR(isi->pclk); + + ret = atmel_isi_parse_dt(isi, pdev); + if (ret) + return ret; + + isi->active = NULL; + isi->dev = &pdev->dev; + mutex_init(&isi->lock); + spin_lock_init(&isi->irqlock); + INIT_LIST_HEAD(&isi->video_buffer_list); + INIT_LIST_HEAD(&isi->dma_desc_head); + + q = &isi->queue; + + /* Initialize the top-level structure */ + ret = v4l2_device_register(&pdev->dev, &isi->v4l2_dev); + if (ret) + return ret; + + isi->vdev = video_device_alloc(); + if (isi->vdev == NULL) { + ret = -ENOMEM; + goto err_vdev_alloc; + } + + /* video node */ + isi->vdev->fops = &isi_fops; + isi->vdev->v4l2_dev = &isi->v4l2_dev; + isi->vdev->queue = &isi->queue; + strlcpy(isi->vdev->name, KBUILD_MODNAME, sizeof(isi->vdev->name)); + isi->vdev->release = video_device_release; + isi->vdev->ioctl_ops = &isi_ioctl_ops; + isi->vdev->lock = &isi->lock; + isi->vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | + V4L2_CAP_READWRITE; + video_set_drvdata(isi->vdev, isi); + + /* buffer queue */ + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF; + q->lock = &isi->lock; + q->drv_priv = isi; + q->buf_struct_size = sizeof(struct frame_buffer); + q->ops = &isi_video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->min_buffers_needed = 2; + q->dev = &pdev->dev; + + ret = vb2_queue_init(q); + if (ret < 0) { + dev_err(&pdev->dev, "failed to initialize VB2 queue\n"); + goto err_vb2_queue; + } + isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev, + sizeof(struct fbd) * VIDEO_MAX_FRAME, + &isi->fb_descriptors_phys, + GFP_KERNEL); + if (!isi->p_fb_descriptors) { + dev_err(&pdev->dev, "Can't allocate descriptors!\n"); + ret = -ENOMEM; + goto err_dma_alloc; + } + + for (i = 0; i < VIDEO_MAX_FRAME; i++) { + isi->dma_desc[i].p_fbd = isi->p_fb_descriptors + i; + isi->dma_desc[i].fbd_phys = isi->fb_descriptors_phys + + i * sizeof(struct fbd); + list_add(&isi->dma_desc[i].list, &isi->dma_desc_head); + } + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + isi->regs = devm_ioremap_resource(&pdev->dev, regs); + if (IS_ERR(isi->regs)) { + ret = PTR_ERR(isi->regs); + goto err_ioremap; + } + + if (isi->pdata.data_width_flags & ISI_DATAWIDTH_8) + isi->width_flags = 1 << 7; + if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10) + isi->width_flags |= 1 << 9; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto err_req_irq; + } + + ret = devm_request_irq(&pdev->dev, irq, isi_interrupt, 0, "isi", isi); + if (ret) { + dev_err(&pdev->dev, "Unable to request irq %d\n", irq); + goto err_req_irq; + } + isi->irq = irq; + + ret = isi_graph_init(isi); + if (ret < 0) + goto err_req_irq; + + pm_suspend_ignore_children(&pdev->dev, true); + pm_runtime_enable(&pdev->dev); + platform_set_drvdata(pdev, isi); + return 0; + +err_req_irq: +err_ioremap: + dma_free_coherent(&pdev->dev, + sizeof(struct fbd) * VIDEO_MAX_FRAME, + isi->p_fb_descriptors, + isi->fb_descriptors_phys); +err_dma_alloc: +err_vb2_queue: + video_device_release(isi->vdev); +err_vdev_alloc: + v4l2_device_unregister(&isi->v4l2_dev); + + return ret; +} + +static int atmel_isi_remove(struct platform_device *pdev) +{ + struct atmel_isi *isi = platform_get_drvdata(pdev); + + dma_free_coherent(&pdev->dev, + sizeof(struct fbd) * VIDEO_MAX_FRAME, + isi->p_fb_descriptors, + isi->fb_descriptors_phys); + pm_runtime_disable(&pdev->dev); + v4l2_async_notifier_unregister(&isi->notifier); + v4l2_device_unregister(&isi->v4l2_dev); + + return 0; +} + +#ifdef CONFIG_PM +static int atmel_isi_runtime_suspend(struct device *dev) +{ + struct atmel_isi *isi = dev_get_drvdata(dev); + + clk_disable_unprepare(isi->pclk); + + return 0; +} +static int atmel_isi_runtime_resume(struct device *dev) +{ + struct atmel_isi *isi = dev_get_drvdata(dev); + + return clk_prepare_enable(isi->pclk); +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops atmel_isi_dev_pm_ops = { + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, + atmel_isi_runtime_resume, NULL) +}; + +static const struct of_device_id atmel_isi_of_match[] = { + { .compatible = "atmel,at91sam9g45-isi" }, + { } +}; +MODULE_DEVICE_TABLE(of, atmel_isi_of_match); + +static struct platform_driver atmel_isi_driver = { + .driver = { + .name = "atmel_isi", + .of_match_table = of_match_ptr(atmel_isi_of_match), + .pm = &atmel_isi_dev_pm_ops, + }, + .probe = atmel_isi_probe, + .remove = atmel_isi_remove, +}; + +module_platform_driver(atmel_isi_driver); + +MODULE_AUTHOR("Josh Wu <josh.wu@atmel.com>"); +MODULE_DESCRIPTION("The V4L2 driver for Atmel Linux"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("video"); diff --git a/drivers/media/platform/soc_camera/atmel-isi.h b/drivers/media/platform/atmel/atmel-isi.h index 0acb32a2b65c..0acb32a2b65c 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.h +++ b/drivers/media/platform/atmel/atmel-isi.h diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c index 466a44e4549e..403214e00e95 100644 --- a/drivers/media/platform/coda/coda-bit.c +++ b/drivers/media/platform/coda/coda-bit.c @@ -179,6 +179,25 @@ static void coda_kfifo_sync_to_device_write(struct coda_ctx *ctx) coda_write(dev, wr_ptr, CODA_REG_BIT_WR_PTR(ctx->reg_idx)); } +static int coda_bitstream_pad(struct coda_ctx *ctx, u32 size) +{ + unsigned char *buf; + u32 n; + + if (size < 6) + size = 6; + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + coda_h264_filler_nal(size, buf); + n = kfifo_in(&ctx->bitstream_fifo, buf, size); + kfree(buf); + + return (n < size) ? -ENOSPC : 0; +} + static int coda_bitstream_queue(struct coda_ctx *ctx, struct vb2_v4l2_buffer *src_buf) { @@ -198,10 +217,10 @@ static int coda_bitstream_queue(struct coda_ctx *ctx, static bool coda_bitstream_try_queue(struct coda_ctx *ctx, struct vb2_v4l2_buffer *src_buf) { + unsigned long payload = vb2_get_plane_payload(&src_buf->vb2_buf, 0); int ret; - if (coda_get_bitstream_payload(ctx) + - vb2_get_plane_payload(&src_buf->vb2_buf, 0) + 512 >= + if (coda_get_bitstream_payload(ctx) + payload + 512 >= ctx->bitstream.size) return false; @@ -210,6 +229,11 @@ static bool coda_bitstream_try_queue(struct coda_ctx *ctx, return true; } + /* Add zero padding before the first H.264 buffer, if it is too small */ + if (ctx->qsequence == 0 && payload < 512 && + ctx->codec->src_fourcc == V4L2_PIX_FMT_H264) + coda_bitstream_pad(ctx, 512 - payload); + ret = coda_bitstream_queue(ctx, src_buf); if (ret < 0) { v4l2_err(&ctx->dev->v4l2_dev, "bitstream buffer overflow\n"); @@ -224,7 +248,7 @@ static bool coda_bitstream_try_queue(struct coda_ctx *ctx, return true; } -void coda_fill_bitstream(struct coda_ctx *ctx, bool streaming) +void coda_fill_bitstream(struct coda_ctx *ctx, struct list_head *buffer_list) { struct vb2_v4l2_buffer *src_buf; struct coda_buffer_meta *meta; @@ -252,9 +276,16 @@ void coda_fill_bitstream(struct coda_ctx *ctx, bool streaming) "dropping invalid JPEG frame %d\n", ctx->qsequence); src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); - v4l2_m2m_buf_done(src_buf, streaming ? - VB2_BUF_STATE_ERROR : - VB2_BUF_STATE_QUEUED); + if (buffer_list) { + struct v4l2_m2m_buffer *m2m_buf; + + m2m_buf = container_of(src_buf, + struct v4l2_m2m_buffer, + vb); + list_add_tail(&m2m_buf->list, buffer_list); + } else { + v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR); + } continue; } @@ -295,7 +326,16 @@ void coda_fill_bitstream(struct coda_ctx *ctx, bool streaming) trace_coda_bit_queue(ctx, src_buf, meta); } - v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE); + if (buffer_list) { + struct v4l2_m2m_buffer *m2m_buf; + + m2m_buf = container_of(src_buf, + struct v4l2_m2m_buffer, + vb); + list_add_tail(&m2m_buf->list, buffer_list); + } else { + v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE); + } } else { break; } @@ -1508,6 +1548,47 @@ static int coda_decoder_reqbufs(struct coda_ctx *ctx, return 0; } +static bool coda_reorder_enable(struct coda_ctx *ctx) +{ + const char * const *profile_names; + const char * const *level_names; + struct coda_dev *dev = ctx->dev; + int profile, level; + + if (dev->devtype->product != CODA_7541 && + dev->devtype->product != CODA_960) + return false; + + if (ctx->codec->src_fourcc == V4L2_PIX_FMT_JPEG) + return false; + + if (ctx->codec->src_fourcc != V4L2_PIX_FMT_H264) + return true; + + profile = coda_h264_profile(ctx->params.h264_profile_idc); + if (profile < 0) { + v4l2_warn(&dev->v4l2_dev, "Invalid H264 Profile: %d\n", + ctx->params.h264_profile_idc); + return false; + } + + level = coda_h264_level(ctx->params.h264_level_idc); + if (level < 0) { + v4l2_warn(&dev->v4l2_dev, "Invalid H264 Level: %d\n", + ctx->params.h264_level_idc); + return false; + } + + profile_names = v4l2_ctrl_get_menu(V4L2_CID_MPEG_VIDEO_H264_PROFILE); + level_names = v4l2_ctrl_get_menu(V4L2_CID_MPEG_VIDEO_H264_LEVEL); + + v4l2_dbg(1, coda_debug, &dev->v4l2_dev, "H264 Profile/Level: %s L%s\n", + profile_names[profile], level_names[level]); + + /* Baseline profile does not support reordering */ + return profile > V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE; +} + static int __coda_start_decoding(struct coda_ctx *ctx) { struct coda_q_data *q_data_src, *q_data_dst; @@ -1554,8 +1635,7 @@ static int __coda_start_decoding(struct coda_ctx *ctx) coda_write(dev, bitstream_buf, CODA_CMD_DEC_SEQ_BB_START); coda_write(dev, bitstream_size / 1024, CODA_CMD_DEC_SEQ_BB_SIZE); val = 0; - if ((dev->devtype->product == CODA_7541) || - (dev->devtype->product == CODA_960)) + if (coda_reorder_enable(ctx)) val |= CODA_REORDER_ENABLE; if (ctx->codec->src_fourcc == V4L2_PIX_FMT_JPEG) val |= CODA_NO_INT_ENABLE; @@ -1747,7 +1827,7 @@ static int coda_prepare_decode(struct coda_ctx *ctx) /* Try to copy source buffer contents into the bitstream ringbuffer */ mutex_lock(&ctx->bitstream_mutex); - coda_fill_bitstream(ctx, true); + coda_fill_bitstream(ctx, NULL); mutex_unlock(&ctx->bitstream_mutex); if (coda_get_bitstream_payload(ctx) < 512 && diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c index eb6548f46cba..d523e990d509 100644 --- a/drivers/media/platform/coda/coda-common.c +++ b/drivers/media/platform/coda/coda-common.c @@ -71,6 +71,10 @@ static int disable_vdoa; module_param(disable_vdoa, int, 0644); MODULE_PARM_DESC(disable_vdoa, "Disable Video Data Order Adapter tiled to raster-scan conversion"); +static int enable_bwb = 0; +module_param(enable_bwb, int, 0644); +MODULE_PARM_DESC(enable_bwb, "Enable BWB unit, may crash on certain streams"); + void coda_write(struct coda_dev *dev, u32 data, u32 reg) { v4l2_dbg(2, coda_debug, &dev->v4l2_dev, @@ -386,6 +390,7 @@ static int coda_enum_fmt(struct file *file, void *priv, { struct video_device *vdev = video_devdata(file); const struct coda_video_device *cvd = to_coda_video_device(vdev); + struct coda_ctx *ctx = fh_to_ctx(priv); const u32 *formats; if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) @@ -398,6 +403,11 @@ static int coda_enum_fmt(struct file *file, void *priv, if (f->index >= CODA_MAX_FORMATS || formats[f->index] == 0) return -EINVAL; + /* Skip YUYV if the vdoa is not available */ + if (!ctx->vdoa && f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && + formats[f->index] == V4L2_PIX_FMT_YUYV) + return -EINVAL; + f->pixelformat = formats[f->index]; return 0; @@ -813,10 +823,6 @@ static int coda_qbuf(struct file *file, void *priv, static bool coda_buf_is_end_of_stream(struct coda_ctx *ctx, struct vb2_v4l2_buffer *buf) { - struct vb2_queue *src_vq; - - src_vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); - return ((ctx->bit_stream_param & CODA_BIT_STREAM_END_FLAG) && (buf->sequence == (ctx->qsequence - 1))); } @@ -881,6 +887,47 @@ static int coda_g_selection(struct file *file, void *fh, return 0; } +static int coda_try_encoder_cmd(struct file *file, void *fh, + struct v4l2_encoder_cmd *ec) +{ + if (ec->cmd != V4L2_ENC_CMD_STOP) + return -EINVAL; + + if (ec->flags & V4L2_ENC_CMD_STOP_AT_GOP_END) + return -EINVAL; + + return 0; +} + +static int coda_encoder_cmd(struct file *file, void *fh, + struct v4l2_encoder_cmd *ec) +{ + struct coda_ctx *ctx = fh_to_ctx(fh); + struct vb2_queue *dst_vq; + int ret; + + ret = coda_try_encoder_cmd(file, fh, ec); + if (ret < 0) + return ret; + + /* Ignore encoder stop command silently in decoder context */ + if (ctx->inst_type != CODA_INST_ENCODER) + return 0; + + /* Set the stream-end flag on this context */ + ctx->bit_stream_param |= CODA_BIT_STREAM_END_FLAG; + + /* If there is no buffer in flight, wake up */ + if (ctx->qsequence == ctx->osequence) { + dst_vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, + V4L2_BUF_TYPE_VIDEO_CAPTURE); + dst_vq->last_buffer_dequeued = true; + wake_up(&dst_vq->done_wq); + } + + return 0; +} + static int coda_try_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *dc) { @@ -1054,6 +1101,8 @@ static const struct v4l2_ioctl_ops coda_ioctl_ops = { .vidioc_g_selection = coda_g_selection, + .vidioc_try_encoder_cmd = coda_try_encoder_cmd, + .vidioc_encoder_cmd = coda_encoder_cmd, .vidioc_try_decoder_cmd = coda_try_decoder_cmd, .vidioc_decoder_cmd = coda_decoder_cmd, @@ -1327,12 +1376,28 @@ static void coda_buf_queue(struct vb2_buffer *vb) */ if (vb2_get_plane_payload(vb, 0) == 0) coda_bit_stream_end_flag(ctx); + + if (q_data->fourcc == V4L2_PIX_FMT_H264) { + /* + * Unless already done, try to obtain profile_idc and + * level_idc from the SPS header. This allows to decide + * whether to enable reordering during sequence + * initialization. + */ + if (!ctx->params.h264_profile_idc) + coda_sps_parse_profile(ctx, vb); + } + mutex_lock(&ctx->bitstream_mutex); v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf); if (vb2_is_streaming(vb->vb2_queue)) - coda_fill_bitstream(ctx, true); + /* This set buf->sequence = ctx->qsequence++ */ + coda_fill_bitstream(ctx, NULL); mutex_unlock(&ctx->bitstream_mutex); } else { + if (ctx->inst_type == CODA_INST_ENCODER && + vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + vbuf->sequence = ctx->qsequence++; v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf); } } @@ -1344,7 +1409,7 @@ int coda_alloc_aux_buf(struct coda_dev *dev, struct coda_aux_buf *buf, GFP_KERNEL); if (!buf->vaddr) { v4l2_err(&dev->v4l2_dev, - "Failed to allocate %s buffer of size %u\n", + "Failed to allocate %s buffer of size %zu\n", name, size); return -ENOMEM; } @@ -1382,18 +1447,22 @@ static int coda_start_streaming(struct vb2_queue *q, unsigned int count) struct coda_ctx *ctx = vb2_get_drv_priv(q); struct v4l2_device *v4l2_dev = &ctx->dev->v4l2_dev; struct coda_q_data *q_data_src, *q_data_dst; + struct v4l2_m2m_buffer *m2m_buf, *tmp; struct vb2_v4l2_buffer *buf; + struct list_head list; int ret = 0; if (count < 1) return -EINVAL; + INIT_LIST_HEAD(&list); + q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { if (ctx->inst_type == CODA_INST_DECODER && ctx->use_bit) { /* copy the buffers that were queued before streamon */ mutex_lock(&ctx->bitstream_mutex); - coda_fill_bitstream(ctx, false); + coda_fill_bitstream(ctx, &list); mutex_unlock(&ctx->bitstream_mutex); if (coda_get_bitstream_payload(ctx) < 512) { @@ -1408,8 +1477,8 @@ static int coda_start_streaming(struct vb2_queue *q, unsigned int count) } /* Don't start the coda unless both queues are on */ - if (!(ctx->streamon_out & ctx->streamon_cap)) - return 0; + if (!(ctx->streamon_out && ctx->streamon_cap)) + goto out; q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); if ((q_data_src->width != q_data_dst->width && @@ -1444,15 +1513,26 @@ static int coda_start_streaming(struct vb2_queue *q, unsigned int count) ret = ctx->ops->start_streaming(ctx); if (ctx->inst_type == CODA_INST_DECODER) { if (ret == -EAGAIN) - return 0; - else if (ret < 0) - goto err; + goto out; } + if (ret < 0) + goto err; - return ret; +out: + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + list_for_each_entry_safe(m2m_buf, tmp, &list, list) { + list_del(&m2m_buf->list); + v4l2_m2m_buf_done(&m2m_buf->vb, VB2_BUF_STATE_DONE); + } + } + return 0; err: if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + list_for_each_entry_safe(m2m_buf, tmp, &list, list) { + list_del(&m2m_buf->list); + v4l2_m2m_buf_done(&m2m_buf->vb, VB2_BUF_STATE_QUEUED); + } while ((buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx))) v4l2_m2m_buf_done(buf, VB2_BUF_STATE_QUEUED); } else { @@ -1832,7 +1912,8 @@ static int coda_open(struct file *file) ctx->idx = idx; switch (dev->devtype->product) { case CODA_960: - ctx->frame_mem_ctrl = 1 << 12; + if (enable_bwb) + ctx->frame_mem_ctrl = CODA9_FRAME_ENABLE_BWB; /* fallthrough */ case CODA_7541: ctx->reg_idx = 0; @@ -2126,7 +2207,12 @@ static void coda_fw_callback(const struct firmware *fw, void *context); static int coda_firmware_request(struct coda_dev *dev) { - char *fw = dev->devtype->firmware[dev->firmware]; + char *fw; + + if (dev->firmware >= ARRAY_SIZE(dev->devtype->firmware)) + return -EINVAL; + + fw = dev->devtype->firmware[dev->firmware]; dev_dbg(&dev->plat_dev->dev, "requesting firmware '%s' for %s\n", fw, coda_product_name(dev->devtype->product)); @@ -2142,16 +2228,16 @@ static void coda_fw_callback(const struct firmware *fw, void *context) struct platform_device *pdev = dev->plat_dev; int i, ret; - if (!fw && dev->firmware == 1) { - v4l2_err(&dev->v4l2_dev, "firmware request failed\n"); - goto put_pm; - } if (!fw) { - dev->firmware = 1; - coda_firmware_request(dev); + dev->firmware++; + ret = coda_firmware_request(dev); + if (ret < 0) { + v4l2_err(&dev->v4l2_dev, "firmware request failed\n"); + goto put_pm; + } return; } - if (dev->firmware == 1) { + if (dev->firmware > 0) { /* * Since we can't suppress warnings for failed asynchronous * firmware requests, report that the fallback firmware was diff --git a/drivers/media/platform/coda/coda-h264.c b/drivers/media/platform/coda/coda-h264.c index 09dfcca7cc50..0e27412e01f5 100644 --- a/drivers/media/platform/coda/coda-h264.c +++ b/drivers/media/platform/coda/coda-h264.c @@ -13,12 +13,59 @@ #include <linux/kernel.h> #include <linux/string.h> +#include <linux/videodev2.h> #include <coda.h> -static const u8 coda_filler_nal[14] = { 0x00, 0x00, 0x00, 0x01, 0x0c, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80 }; static const u8 coda_filler_size[8] = { 0, 7, 14, 13, 12, 11, 10, 9 }; +static const u8 *coda_find_nal_header(const u8 *buf, const u8 *end) +{ + u32 val = 0xffffffff; + + do { + val = val << 8 | *buf++; + if (buf >= end) + return NULL; + } while (val != 0x00000001); + + return buf; +} + +int coda_sps_parse_profile(struct coda_ctx *ctx, struct vb2_buffer *vb) +{ + const u8 *buf = vb2_plane_vaddr(vb, 0); + const u8 *end = buf + vb2_get_plane_payload(vb, 0); + + /* Find SPS header */ + do { + buf = coda_find_nal_header(buf, end); + if (!buf) + return -EINVAL; + } while ((*buf++ & 0x1f) != 0x7); + + ctx->params.h264_profile_idc = buf[0]; + ctx->params.h264_level_idc = buf[2]; + + return 0; +} + +int coda_h264_filler_nal(int size, char *p) +{ + if (size < 6) + return -EINVAL; + + p[0] = 0x00; + p[1] = 0x00; + p[2] = 0x00; + p[3] = 0x01; + p[4] = 0x0c; + memset(p + 5, 0xff, size - 6); + /* Add rbsp stop bit and trailing at the end */ + p[size - 1] = 0x80; + + return 0; +} + int coda_h264_padding(int size, char *p) { int nal_size; @@ -29,10 +76,38 @@ int coda_h264_padding(int size, char *p) return 0; nal_size = coda_filler_size[diff]; - memcpy(p, coda_filler_nal, nal_size); - - /* Add rbsp stop bit and trailing at the end */ - *(p + nal_size - 1) = 0x80; + coda_h264_filler_nal(nal_size, p); return nal_size; } + +int coda_h264_profile(int profile_idc) +{ + switch (profile_idc) { + case 66: return V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE; + case 77: return V4L2_MPEG_VIDEO_H264_PROFILE_MAIN; + case 88: return V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED; + case 100: return V4L2_MPEG_VIDEO_H264_PROFILE_HIGH; + default: return -EINVAL; + } +} + +int coda_h264_level(int level_idc) +{ + switch (level_idc) { + case 10: return V4L2_MPEG_VIDEO_H264_LEVEL_1_0; + case 9: return V4L2_MPEG_VIDEO_H264_LEVEL_1B; + case 11: return V4L2_MPEG_VIDEO_H264_LEVEL_1_1; + case 12: return V4L2_MPEG_VIDEO_H264_LEVEL_1_2; + case 13: return V4L2_MPEG_VIDEO_H264_LEVEL_1_3; + case 20: return V4L2_MPEG_VIDEO_H264_LEVEL_2_0; + case 21: return V4L2_MPEG_VIDEO_H264_LEVEL_2_1; + case 22: return V4L2_MPEG_VIDEO_H264_LEVEL_2_2; + case 30: return V4L2_MPEG_VIDEO_H264_LEVEL_3_0; + case 31: return V4L2_MPEG_VIDEO_H264_LEVEL_3_1; + case 32: return V4L2_MPEG_VIDEO_H264_LEVEL_3_2; + case 40: return V4L2_MPEG_VIDEO_H264_LEVEL_4_0; + case 41: return V4L2_MPEG_VIDEO_H264_LEVEL_4_1; + default: return -EINVAL; + } +} diff --git a/drivers/media/platform/coda/coda.h b/drivers/media/platform/coda/coda.h index 4b831c91ae4a..20222befb9b2 100644 --- a/drivers/media/platform/coda/coda.h +++ b/drivers/media/platform/coda/coda.h @@ -28,7 +28,7 @@ #include "coda_regs.h" -#define CODA_MAX_FRAMEBUFFERS 8 +#define CODA_MAX_FRAMEBUFFERS 17 #define FMO_SLICE_SAVE_BUF_SIZE (32) enum { @@ -117,6 +117,8 @@ struct coda_params { u8 h264_deblk_enabled; u8 h264_deblk_alpha; u8 h264_deblk_beta; + u8 h264_profile_idc; + u8 h264_level_idc; u8 mpeg4_intra_qp; u8 mpeg4_inter_qp; u8 gop_size; @@ -259,7 +261,7 @@ int coda_decoder_queue_init(void *priv, struct vb2_queue *src_vq, int coda_hw_reset(struct coda_ctx *ctx); -void coda_fill_bitstream(struct coda_ctx *ctx, bool streaming); +void coda_fill_bitstream(struct coda_ctx *ctx, struct list_head *buffer_list); void coda_set_gdi_regs(struct coda_ctx *ctx); @@ -290,7 +292,11 @@ void coda_bit_stream_end_flag(struct coda_ctx *ctx); void coda_m2m_buf_done(struct coda_ctx *ctx, struct vb2_v4l2_buffer *buf, enum vb2_buffer_state state); +int coda_h264_filler_nal(int size, char *p); int coda_h264_padding(int size, char *p); +int coda_h264_profile(int profile_idc); +int coda_h264_level(int level_idc); +int coda_sps_parse_profile(struct coda_ctx *ctx, struct vb2_buffer *vb); bool coda_jpeg_check_buffer(struct coda_ctx *ctx, struct vb2_buffer *vb); int coda_jpeg_write_tables(struct coda_ctx *ctx); diff --git a/drivers/media/platform/coda/coda_regs.h b/drivers/media/platform/coda/coda_regs.h index 3490602fa6e1..77ee46a93427 100644 --- a/drivers/media/platform/coda/coda_regs.h +++ b/drivers/media/platform/coda/coda_regs.h @@ -51,6 +51,7 @@ #define CODA7_STREAM_SEL_64BITS_ENDIAN (1 << 1) #define CODA_STREAM_ENDIAN_SELECT (1 << 0) #define CODA_REG_BIT_FRAME_MEM_CTRL 0x110 +#define CODA9_FRAME_ENABLE_BWB (1 << 12) #define CODA9_FRAME_TILED2LINEAR (1 << 11) #define CODA_FRAME_CHROMA_INTERLEAVE (1 << 2) #define CODA_IMAGE_ENDIAN_SELECT (1 << 0) diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c index 50c30731bb78..7e5cf9923c8d 100644 --- a/drivers/media/platform/davinci/vpif_display.c +++ b/drivers/media/platform/davinci/vpif_display.c @@ -1287,7 +1287,7 @@ static __init int vpif_probe(struct platform_device *pdev) } if (!vpif_obj.config->asd_sizes) { - i2c_adap = i2c_get_adapter(1); + i2c_adap = i2c_get_adapter(vpif_obj.config->i2c_adapter_id); for (i = 0; i < subdev_count; i++) { vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev, diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c index 0f0c389f8897..59a634201830 100644 --- a/drivers/media/platform/exynos-gsc/gsc-core.c +++ b/drivers/media/platform/exynos-gsc/gsc-core.c @@ -112,6 +112,15 @@ static const struct gsc_fmt gsc_formats[] = { .num_planes = 1, .num_comp = 2, }, { + .name = "YUV 4:2:2 non-contig, Y/CbCr", + .pixelformat = V4L2_PIX_FMT_NV16M, + .depth = { 8, 8 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CBCR, + .num_planes = 2, + .num_comp = 2, + }, { .name = "YUV 4:2:2 planar, Y/CrCb", .pixelformat = V4L2_PIX_FMT_NV61, .depth = { 16 }, @@ -121,6 +130,15 @@ static const struct gsc_fmt gsc_formats[] = { .num_planes = 1, .num_comp = 2, }, { + .name = "YUV 4:2:2 non-contig, Y/CrCb", + .pixelformat = V4L2_PIX_FMT_NV61M, + .depth = { 8, 8 }, + .color = GSC_YUV422, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 2, + .num_comp = 2, + }, { .name = "YUV 4:2:0 planar, YCbCr", .pixelformat = V4L2_PIX_FMT_YUV420, .depth = { 12 }, @@ -158,6 +176,15 @@ static const struct gsc_fmt gsc_formats[] = { .num_planes = 1, .num_comp = 2, }, { + .name = "YUV 4:2:0 non-contig. 2p, Y/CrCb", + .pixelformat = V4L2_PIX_FMT_NV21M, + .depth = { 8, 4 }, + .color = GSC_YUV420, + .yorder = GSC_LSB_Y, + .corder = GSC_CRCB, + .num_planes = 2, + .num_comp = 2, + }, { .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr", .pixelformat = V4L2_PIX_FMT_NV12M, .depth = { 8, 4 }, diff --git a/drivers/media/platform/fsl-viu.c b/drivers/media/platform/fsl-viu.c index ae8c6b35a357..97e164b2075a 100644 --- a/drivers/media/platform/fsl-viu.c +++ b/drivers/media/platform/fsl-viu.c @@ -1466,9 +1466,8 @@ static int viu_of_probe(struct platform_device *op) viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad, "saa7113", VIU_VIDEO_DECODER_ADDR, NULL); - viu_dev->vidq.timeout.function = viu_vid_timeout; - viu_dev->vidq.timeout.data = (unsigned long)viu_dev; - init_timer(&viu_dev->vidq.timeout); + setup_timer(&viu_dev->vidq.timeout, viu_vid_timeout, + (unsigned long)viu_dev); viu_dev->std = V4L2_STD_NTSC_M; viu_dev->first = 1; diff --git a/drivers/media/platform/m2m-deinterlace.c b/drivers/media/platform/m2m-deinterlace.c index bedc7cc4c7d6..980066b8d32a 100644 --- a/drivers/media/platform/m2m-deinterlace.c +++ b/drivers/media/platform/m2m-deinterlace.c @@ -1017,6 +1017,7 @@ static int deinterlace_probe(struct platform_device *pdev) if (!dma_has_cap(DMA_INTERLEAVE, pcdev->dma_chan->device->cap_mask)) { dev_err(&pdev->dev, "DMA does not support INTERLEAVE\n"); + ret = -ENODEV; goto rel_dma; } diff --git a/drivers/media/platform/mtk-jpeg/Makefile b/drivers/media/platform/mtk-jpeg/Makefile new file mode 100644 index 000000000000..b2e6069f3959 --- /dev/null +++ b/drivers/media/platform/mtk-jpeg/Makefile @@ -0,0 +1,2 @@ +mtk_jpeg-objs := mtk_jpeg_core.o mtk_jpeg_hw.o mtk_jpeg_parse.o +obj-$(CONFIG_VIDEO_MEDIATEK_JPEG) += mtk_jpeg.o diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c new file mode 100644 index 000000000000..451a54039e65 --- /dev/null +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c @@ -0,0 +1,1292 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * Rick Chang <rick.chang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <media/v4l2-event.h> +#include <media/v4l2-mem2mem.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> +#include <soc/mediatek/smi.h> + +#include "mtk_jpeg_hw.h" +#include "mtk_jpeg_core.h" +#include "mtk_jpeg_parse.h" + +static struct mtk_jpeg_fmt mtk_jpeg_formats[] = { + { + .fourcc = V4L2_PIX_FMT_JPEG, + .colplanes = 1, + .flags = MTK_JPEG_FMT_FLAG_DEC_OUTPUT, + }, + { + .fourcc = V4L2_PIX_FMT_YUV420M, + .h_sample = {4, 2, 2}, + .v_sample = {4, 2, 2}, + .colplanes = 3, + .h_align = 5, + .v_align = 4, + .flags = MTK_JPEG_FMT_FLAG_DEC_CAPTURE, + }, + { + .fourcc = V4L2_PIX_FMT_YUV422M, + .h_sample = {4, 2, 2}, + .v_sample = {4, 4, 4}, + .colplanes = 3, + .h_align = 5, + .v_align = 3, + .flags = MTK_JPEG_FMT_FLAG_DEC_CAPTURE, + }, +}; + +#define MTK_JPEG_NUM_FORMATS ARRAY_SIZE(mtk_jpeg_formats) + +enum { + MTK_JPEG_BUF_FLAGS_INIT = 0, + MTK_JPEG_BUF_FLAGS_LAST_FRAME = 1, +}; + +struct mtk_jpeg_src_buf { + struct vb2_v4l2_buffer b; + struct list_head list; + int flags; + struct mtk_jpeg_dec_param dec_param; +}; + +static int debug; +module_param(debug, int, 0644); + +static inline struct mtk_jpeg_ctx *mtk_jpeg_fh_to_ctx(struct v4l2_fh *fh) +{ + return container_of(fh, struct mtk_jpeg_ctx, fh); +} + +static inline struct mtk_jpeg_src_buf *mtk_jpeg_vb2_to_srcbuf( + struct vb2_buffer *vb) +{ + return container_of(to_vb2_v4l2_buffer(vb), struct mtk_jpeg_src_buf, b); +} + +static int mtk_jpeg_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct mtk_jpeg_dev *jpeg = video_drvdata(file); + + strlcpy(cap->driver, MTK_JPEG_NAME " decoder", sizeof(cap->driver)); + strlcpy(cap->card, MTK_JPEG_NAME " decoder", sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + dev_name(jpeg->dev)); + + return 0; +} + +static int mtk_jpeg_enum_fmt(struct mtk_jpeg_fmt *mtk_jpeg_formats, int n, + struct v4l2_fmtdesc *f, u32 type) +{ + int i, num = 0; + + for (i = 0; i < n; ++i) { + if (mtk_jpeg_formats[i].flags & type) { + if (num == f->index) + break; + ++num; + } + } + + if (i >= n) + return -EINVAL; + + f->pixelformat = mtk_jpeg_formats[i].fourcc; + + return 0; +} + +static int mtk_jpeg_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f, + MTK_JPEG_FMT_FLAG_DEC_CAPTURE); +} + +static int mtk_jpeg_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return mtk_jpeg_enum_fmt(mtk_jpeg_formats, MTK_JPEG_NUM_FORMATS, f, + MTK_JPEG_FMT_FLAG_DEC_OUTPUT); +} + +static struct mtk_jpeg_q_data *mtk_jpeg_get_q_data(struct mtk_jpeg_ctx *ctx, + enum v4l2_buf_type type) +{ + if (V4L2_TYPE_IS_OUTPUT(type)) + return &ctx->out_q; + return &ctx->cap_q; +} + +static struct mtk_jpeg_fmt *mtk_jpeg_find_format(struct mtk_jpeg_ctx *ctx, + u32 pixelformat, + unsigned int fmt_type) +{ + unsigned int k, fmt_flag; + + fmt_flag = (fmt_type == MTK_JPEG_FMT_TYPE_OUTPUT) ? + MTK_JPEG_FMT_FLAG_DEC_OUTPUT : + MTK_JPEG_FMT_FLAG_DEC_CAPTURE; + + for (k = 0; k < MTK_JPEG_NUM_FORMATS; k++) { + struct mtk_jpeg_fmt *fmt = &mtk_jpeg_formats[k]; + + if (fmt->fourcc == pixelformat && fmt->flags & fmt_flag) + return fmt; + } + + return NULL; +} + +static void mtk_jpeg_bound_align_image(u32 *w, unsigned int wmin, + unsigned int wmax, unsigned int walign, + u32 *h, unsigned int hmin, + unsigned int hmax, unsigned int halign) +{ + int width, height, w_step, h_step; + + width = *w; + height = *h; + w_step = 1 << walign; + h_step = 1 << halign; + + v4l_bound_align_image(w, wmin, wmax, walign, h, hmin, hmax, halign, 0); + if (*w < width && (*w + w_step) <= wmax) + *w += w_step; + if (*h < height && (*h + h_step) <= hmax) + *h += h_step; +} + +static void mtk_jpeg_adjust_fmt_mplane(struct mtk_jpeg_ctx *ctx, + struct v4l2_format *f) +{ + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; + struct mtk_jpeg_q_data *q_data; + int i; + + q_data = mtk_jpeg_get_q_data(ctx, f->type); + + pix_mp->width = q_data->w; + pix_mp->height = q_data->h; + pix_mp->pixelformat = q_data->fmt->fourcc; + pix_mp->num_planes = q_data->fmt->colplanes; + + for (i = 0; i < pix_mp->num_planes; i++) { + pix_mp->plane_fmt[i].bytesperline = q_data->bytesperline[i]; + pix_mp->plane_fmt[i].sizeimage = q_data->sizeimage[i]; + } +} + +static int mtk_jpeg_try_fmt_mplane(struct v4l2_format *f, + struct mtk_jpeg_fmt *fmt, + struct mtk_jpeg_ctx *ctx, int q_type) +{ + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; + struct mtk_jpeg_dev *jpeg = ctx->jpeg; + int i; + + memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved)); + pix_mp->field = V4L2_FIELD_NONE; + + if (ctx->state != MTK_JPEG_INIT) { + mtk_jpeg_adjust_fmt_mplane(ctx, f); + goto end; + } + + pix_mp->num_planes = fmt->colplanes; + pix_mp->pixelformat = fmt->fourcc; + + if (q_type == MTK_JPEG_FMT_TYPE_OUTPUT) { + struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[0]; + + mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH, + MTK_JPEG_MAX_WIDTH, 0, + &pix_mp->height, MTK_JPEG_MIN_HEIGHT, + MTK_JPEG_MAX_HEIGHT, 0); + + memset(pfmt->reserved, 0, sizeof(pfmt->reserved)); + pfmt->bytesperline = 0; + /* Source size must be aligned to 128 */ + pfmt->sizeimage = mtk_jpeg_align(pfmt->sizeimage, 128); + if (pfmt->sizeimage == 0) + pfmt->sizeimage = MTK_JPEG_DEFAULT_SIZEIMAGE; + goto end; + } + + /* type is MTK_JPEG_FMT_TYPE_CAPTURE */ + mtk_jpeg_bound_align_image(&pix_mp->width, MTK_JPEG_MIN_WIDTH, + MTK_JPEG_MAX_WIDTH, fmt->h_align, + &pix_mp->height, MTK_JPEG_MIN_HEIGHT, + MTK_JPEG_MAX_HEIGHT, fmt->v_align); + + for (i = 0; i < fmt->colplanes; i++) { + struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[i]; + u32 stride = pix_mp->width * fmt->h_sample[i] / 4; + u32 h = pix_mp->height * fmt->v_sample[i] / 4; + + memset(pfmt->reserved, 0, sizeof(pfmt->reserved)); + pfmt->bytesperline = stride; + pfmt->sizeimage = stride * h; + } +end: + v4l2_dbg(2, debug, &jpeg->v4l2_dev, "wxh:%ux%u\n", + pix_mp->width, pix_mp->height); + for (i = 0; i < pix_mp->num_planes; i++) { + v4l2_dbg(2, debug, &jpeg->v4l2_dev, + "plane[%d] bpl=%u, size=%u\n", + i, + pix_mp->plane_fmt[i].bytesperline, + pix_mp->plane_fmt[i].sizeimage); + } + return 0; +} + +static int mtk_jpeg_g_fmt_vid_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct mtk_jpeg_q_data *q_data = NULL; + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; + struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv); + struct mtk_jpeg_dev *jpeg = ctx->jpeg; + int i; + + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = mtk_jpeg_get_q_data(ctx, f->type); + + memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved)); + pix_mp->width = q_data->w; + pix_mp->height = q_data->h; + pix_mp->field = V4L2_FIELD_NONE; + pix_mp->pixelformat = q_data->fmt->fourcc; + pix_mp->num_planes = q_data->fmt->colplanes; + pix_mp->colorspace = ctx->colorspace; + pix_mp->ycbcr_enc = ctx->ycbcr_enc; + pix_mp->xfer_func = ctx->xfer_func; + pix_mp->quantization = ctx->quantization; + + v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) g_fmt:%c%c%c%c wxh:%ux%u\n", + f->type, + (pix_mp->pixelformat & 0xff), + (pix_mp->pixelformat >> 8 & 0xff), + (pix_mp->pixelformat >> 16 & 0xff), + (pix_mp->pixelformat >> 24 & 0xff), + pix_mp->width, pix_mp->height); + + for (i = 0; i < pix_mp->num_planes; i++) { + struct v4l2_plane_pix_format *pfmt = &pix_mp->plane_fmt[i]; + + pfmt->bytesperline = q_data->bytesperline[i]; + pfmt->sizeimage = q_data->sizeimage[i]; + memset(pfmt->reserved, 0, sizeof(pfmt->reserved)); + + v4l2_dbg(1, debug, &jpeg->v4l2_dev, + "plane[%d] bpl=%u, size=%u\n", + i, + pfmt->bytesperline, + pfmt->sizeimage); + } + return 0; +} + +static int mtk_jpeg_try_fmt_vid_cap_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv); + struct mtk_jpeg_fmt *fmt; + + fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat, + MTK_JPEG_FMT_TYPE_CAPTURE); + if (!fmt) + fmt = ctx->cap_q.fmt; + + v4l2_dbg(2, debug, &ctx->jpeg->v4l2_dev, "(%d) try_fmt:%c%c%c%c\n", + f->type, + (fmt->fourcc & 0xff), + (fmt->fourcc >> 8 & 0xff), + (fmt->fourcc >> 16 & 0xff), + (fmt->fourcc >> 24 & 0xff)); + + return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_CAPTURE); +} + +static int mtk_jpeg_try_fmt_vid_out_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv); + struct mtk_jpeg_fmt *fmt; + + fmt = mtk_jpeg_find_format(ctx, f->fmt.pix_mp.pixelformat, + MTK_JPEG_FMT_TYPE_OUTPUT); + if (!fmt) + fmt = ctx->out_q.fmt; + + v4l2_dbg(2, debug, &ctx->jpeg->v4l2_dev, "(%d) try_fmt:%c%c%c%c\n", + f->type, + (fmt->fourcc & 0xff), + (fmt->fourcc >> 8 & 0xff), + (fmt->fourcc >> 16 & 0xff), + (fmt->fourcc >> 24 & 0xff)); + + return mtk_jpeg_try_fmt_mplane(f, fmt, ctx, MTK_JPEG_FMT_TYPE_OUTPUT); +} + +static int mtk_jpeg_s_fmt_mplane(struct mtk_jpeg_ctx *ctx, + struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct mtk_jpeg_q_data *q_data = NULL; + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; + struct mtk_jpeg_dev *jpeg = ctx->jpeg; + unsigned int f_type; + int i; + + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + q_data = mtk_jpeg_get_q_data(ctx, f->type); + + if (vb2_is_busy(vq)) { + v4l2_err(&jpeg->v4l2_dev, "queue busy\n"); + return -EBUSY; + } + + f_type = V4L2_TYPE_IS_OUTPUT(f->type) ? + MTK_JPEG_FMT_TYPE_OUTPUT : MTK_JPEG_FMT_TYPE_CAPTURE; + + q_data->fmt = mtk_jpeg_find_format(ctx, pix_mp->pixelformat, f_type); + q_data->w = pix_mp->width; + q_data->h = pix_mp->height; + ctx->colorspace = pix_mp->colorspace; + ctx->ycbcr_enc = pix_mp->ycbcr_enc; + ctx->xfer_func = pix_mp->xfer_func; + ctx->quantization = pix_mp->quantization; + + v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) s_fmt:%c%c%c%c wxh:%ux%u\n", + f->type, + (q_data->fmt->fourcc & 0xff), + (q_data->fmt->fourcc >> 8 & 0xff), + (q_data->fmt->fourcc >> 16 & 0xff), + (q_data->fmt->fourcc >> 24 & 0xff), + q_data->w, q_data->h); + + for (i = 0; i < q_data->fmt->colplanes; i++) { + q_data->bytesperline[i] = pix_mp->plane_fmt[i].bytesperline; + q_data->sizeimage[i] = pix_mp->plane_fmt[i].sizeimage; + + v4l2_dbg(1, debug, &jpeg->v4l2_dev, + "plane[%d] bpl=%u, size=%u\n", + i, q_data->bytesperline[i], q_data->sizeimage[i]); + } + + return 0; +} + +static int mtk_jpeg_s_fmt_vid_out_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = mtk_jpeg_try_fmt_vid_out_mplane(file, priv, f); + if (ret) + return ret; + + return mtk_jpeg_s_fmt_mplane(mtk_jpeg_fh_to_ctx(priv), f); +} + +static int mtk_jpeg_s_fmt_vid_cap_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + int ret; + + ret = mtk_jpeg_try_fmt_vid_cap_mplane(file, priv, f); + if (ret) + return ret; + + return mtk_jpeg_s_fmt_mplane(mtk_jpeg_fh_to_ctx(priv), f); +} + +static void mtk_jpeg_queue_src_chg_event(struct mtk_jpeg_ctx *ctx) +{ + static const struct v4l2_event ev_src_ch = { + .type = V4L2_EVENT_SOURCE_CHANGE, + .u.src_change.changes = + V4L2_EVENT_SRC_CH_RESOLUTION, + }; + + v4l2_event_queue_fh(&ctx->fh, &ev_src_ch); +} + +static int mtk_jpeg_subscribe_event(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_SOURCE_CHANGE: + return v4l2_src_change_event_subscribe(fh, sub); + default: + return -EINVAL; + } +} + +static int mtk_jpeg_g_selection(struct file *file, void *priv, + struct v4l2_selection *s) +{ + struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv); + + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE: + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + s->r.width = ctx->out_q.w; + s->r.height = ctx->out_q.h; + s->r.left = 0; + s->r.top = 0; + break; + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_COMPOSE_PADDED: + s->r.width = ctx->cap_q.w; + s->r.height = ctx->cap_q.h; + s->r.left = 0; + s->r.top = 0; + break; + default: + return -EINVAL; + } + return 0; +} + +static int mtk_jpeg_s_selection(struct file *file, void *priv, + struct v4l2_selection *s) +{ + struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv); + + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE: + s->r.left = 0; + s->r.top = 0; + s->r.width = ctx->out_q.w; + s->r.height = ctx->out_q.h; + break; + default: + return -EINVAL; + } + return 0; +} + +static int mtk_jpeg_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct v4l2_fh *fh = file->private_data; + struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(priv); + struct vb2_queue *vq; + struct vb2_buffer *vb; + struct mtk_jpeg_src_buf *jpeg_src_buf; + + if (buf->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + goto end; + + vq = v4l2_m2m_get_vq(fh->m2m_ctx, buf->type); + if (buf->index >= vq->num_buffers) { + dev_err(ctx->jpeg->dev, "buffer index out of range\n"); + return -EINVAL; + } + + vb = vq->bufs[buf->index]; + jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb); + jpeg_src_buf->flags = (buf->m.planes[0].bytesused == 0) ? + MTK_JPEG_BUF_FLAGS_LAST_FRAME : MTK_JPEG_BUF_FLAGS_INIT; +end: + return v4l2_m2m_qbuf(file, fh->m2m_ctx, buf); +} + +static const struct v4l2_ioctl_ops mtk_jpeg_ioctl_ops = { + .vidioc_querycap = mtk_jpeg_querycap, + .vidioc_enum_fmt_vid_cap_mplane = mtk_jpeg_enum_fmt_vid_cap, + .vidioc_enum_fmt_vid_out_mplane = mtk_jpeg_enum_fmt_vid_out, + .vidioc_try_fmt_vid_cap_mplane = mtk_jpeg_try_fmt_vid_cap_mplane, + .vidioc_try_fmt_vid_out_mplane = mtk_jpeg_try_fmt_vid_out_mplane, + .vidioc_g_fmt_vid_cap_mplane = mtk_jpeg_g_fmt_vid_mplane, + .vidioc_g_fmt_vid_out_mplane = mtk_jpeg_g_fmt_vid_mplane, + .vidioc_s_fmt_vid_cap_mplane = mtk_jpeg_s_fmt_vid_cap_mplane, + .vidioc_s_fmt_vid_out_mplane = mtk_jpeg_s_fmt_vid_out_mplane, + .vidioc_qbuf = mtk_jpeg_qbuf, + .vidioc_subscribe_event = mtk_jpeg_subscribe_event, + .vidioc_g_selection = mtk_jpeg_g_selection, + .vidioc_s_selection = mtk_jpeg_s_selection, + + .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs, + .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf, + .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, + .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf, + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf, + .vidioc_streamon = v4l2_m2m_ioctl_streamon, + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff, + + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static int mtk_jpeg_queue_setup(struct vb2_queue *q, + unsigned int *num_buffers, + unsigned int *num_planes, + unsigned int sizes[], + struct device *alloc_ctxs[]) +{ + struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q); + struct mtk_jpeg_q_data *q_data = NULL; + struct mtk_jpeg_dev *jpeg = ctx->jpeg; + int i; + + v4l2_dbg(1, debug, &jpeg->v4l2_dev, "(%d) buf_req count=%u\n", + q->type, *num_buffers); + + q_data = mtk_jpeg_get_q_data(ctx, q->type); + if (!q_data) + return -EINVAL; + + *num_planes = q_data->fmt->colplanes; + for (i = 0; i < q_data->fmt->colplanes; i++) { + sizes[i] = q_data->sizeimage[i]; + v4l2_dbg(1, debug, &jpeg->v4l2_dev, "sizeimage[%d]=%u\n", + i, sizes[i]); + } + + return 0; +} + +static int mtk_jpeg_buf_prepare(struct vb2_buffer *vb) +{ + struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct mtk_jpeg_q_data *q_data = NULL; + int i; + + q_data = mtk_jpeg_get_q_data(ctx, vb->vb2_queue->type); + if (!q_data) + return -EINVAL; + + for (i = 0; i < q_data->fmt->colplanes; i++) + vb2_set_plane_payload(vb, i, q_data->sizeimage[i]); + + return 0; +} + +static bool mtk_jpeg_check_resolution_change(struct mtk_jpeg_ctx *ctx, + struct mtk_jpeg_dec_param *param) +{ + struct mtk_jpeg_dev *jpeg = ctx->jpeg; + struct mtk_jpeg_q_data *q_data; + + q_data = &ctx->out_q; + if (q_data->w != param->pic_w || q_data->h != param->pic_h) { + v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Picture size change\n"); + return true; + } + + q_data = &ctx->cap_q; + if (q_data->fmt != mtk_jpeg_find_format(ctx, param->dst_fourcc, + MTK_JPEG_FMT_TYPE_CAPTURE)) { + v4l2_dbg(1, debug, &jpeg->v4l2_dev, "format change\n"); + return true; + } + return false; +} + +static void mtk_jpeg_set_queue_data(struct mtk_jpeg_ctx *ctx, + struct mtk_jpeg_dec_param *param) +{ + struct mtk_jpeg_dev *jpeg = ctx->jpeg; + struct mtk_jpeg_q_data *q_data; + int i; + + q_data = &ctx->out_q; + q_data->w = param->pic_w; + q_data->h = param->pic_h; + + q_data = &ctx->cap_q; + q_data->w = param->dec_w; + q_data->h = param->dec_h; + q_data->fmt = mtk_jpeg_find_format(ctx, + param->dst_fourcc, + MTK_JPEG_FMT_TYPE_CAPTURE); + + for (i = 0; i < q_data->fmt->colplanes; i++) { + q_data->bytesperline[i] = param->mem_stride[i]; + q_data->sizeimage[i] = param->comp_size[i]; + } + + v4l2_dbg(1, debug, &jpeg->v4l2_dev, + "set_parse cap:%c%c%c%c pic(%u, %u), buf(%u, %u)\n", + (param->dst_fourcc & 0xff), + (param->dst_fourcc >> 8 & 0xff), + (param->dst_fourcc >> 16 & 0xff), + (param->dst_fourcc >> 24 & 0xff), + param->pic_w, param->pic_h, + param->dec_w, param->dec_h); +} + +static void mtk_jpeg_buf_queue(struct vb2_buffer *vb) +{ + struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct mtk_jpeg_dec_param *param; + struct mtk_jpeg_dev *jpeg = ctx->jpeg; + struct mtk_jpeg_src_buf *jpeg_src_buf; + bool header_valid; + + v4l2_dbg(2, debug, &jpeg->v4l2_dev, "(%d) buf_q id=%d, vb=%p\n", + vb->vb2_queue->type, vb->index, vb); + + if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + goto end; + + jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb); + param = &jpeg_src_buf->dec_param; + memset(param, 0, sizeof(*param)); + + if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) { + v4l2_dbg(1, debug, &jpeg->v4l2_dev, "Got eos\n"); + goto end; + } + header_valid = mtk_jpeg_parse(param, (u8 *)vb2_plane_vaddr(vb, 0), + vb2_get_plane_payload(vb, 0)); + if (!header_valid) { + v4l2_err(&jpeg->v4l2_dev, "Header invalid.\n"); + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); + return; + } + + if (ctx->state == MTK_JPEG_INIT) { + struct vb2_queue *dst_vq = v4l2_m2m_get_vq( + ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); + + mtk_jpeg_queue_src_chg_event(ctx); + mtk_jpeg_set_queue_data(ctx, param); + ctx->state = vb2_is_streaming(dst_vq) ? + MTK_JPEG_SOURCE_CHANGE : MTK_JPEG_RUNNING; + } +end: + v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, to_vb2_v4l2_buffer(vb)); +} + +static void *mtk_jpeg_buf_remove(struct mtk_jpeg_ctx *ctx, + enum v4l2_buf_type type) +{ + if (V4L2_TYPE_IS_OUTPUT(type)) + return v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); + else + return v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); +} + +static int mtk_jpeg_start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q); + struct vb2_buffer *vb; + int ret = 0; + + ret = pm_runtime_get_sync(ctx->jpeg->dev); + if (ret < 0) + goto err; + + return 0; +err: + while ((vb = mtk_jpeg_buf_remove(ctx, q->type))) + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_QUEUED); + return ret; +} + +static void mtk_jpeg_stop_streaming(struct vb2_queue *q) +{ + struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q); + struct vb2_buffer *vb; + + /* + * STREAMOFF is an acknowledgment for source change event. + * Before STREAMOFF, we still have to return the old resolution and + * subsampling. Update capture queue when the stream is off. + */ + if (ctx->state == MTK_JPEG_SOURCE_CHANGE && + !V4L2_TYPE_IS_OUTPUT(q->type)) { + struct mtk_jpeg_src_buf *src_buf; + + vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); + src_buf = mtk_jpeg_vb2_to_srcbuf(vb); + mtk_jpeg_set_queue_data(ctx, &src_buf->dec_param); + ctx->state = MTK_JPEG_RUNNING; + } else if (V4L2_TYPE_IS_OUTPUT(q->type)) { + ctx->state = MTK_JPEG_INIT; + } + + while ((vb = mtk_jpeg_buf_remove(ctx, q->type))) + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_ERROR); + + pm_runtime_put_sync(ctx->jpeg->dev); +} + +static struct vb2_ops mtk_jpeg_qops = { + .queue_setup = mtk_jpeg_queue_setup, + .buf_prepare = mtk_jpeg_buf_prepare, + .buf_queue = mtk_jpeg_buf_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = mtk_jpeg_start_streaming, + .stop_streaming = mtk_jpeg_stop_streaming, +}; + +static void mtk_jpeg_set_dec_src(struct mtk_jpeg_ctx *ctx, + struct vb2_buffer *src_buf, + struct mtk_jpeg_bs *bs) +{ + bs->str_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0); + bs->end_addr = bs->str_addr + + mtk_jpeg_align(vb2_get_plane_payload(src_buf, 0), 16); + bs->size = mtk_jpeg_align(vb2_plane_size(src_buf, 0), 128); +} + +static int mtk_jpeg_set_dec_dst(struct mtk_jpeg_ctx *ctx, + struct mtk_jpeg_dec_param *param, + struct vb2_buffer *dst_buf, + struct mtk_jpeg_fb *fb) +{ + int i; + + if (param->comp_num != dst_buf->num_planes) { + dev_err(ctx->jpeg->dev, "plane number mismatch (%u != %u)\n", + param->comp_num, dst_buf->num_planes); + return -EINVAL; + } + + for (i = 0; i < dst_buf->num_planes; i++) { + if (vb2_plane_size(dst_buf, i) < param->comp_size[i]) { + dev_err(ctx->jpeg->dev, + "buffer size is underflow (%lu < %u)\n", + vb2_plane_size(dst_buf, 0), + param->comp_size[i]); + return -EINVAL; + } + fb->plane_addr[i] = vb2_dma_contig_plane_dma_addr(dst_buf, i); + } + + return 0; +} + +static void mtk_jpeg_device_run(void *priv) +{ + struct mtk_jpeg_ctx *ctx = priv; + struct mtk_jpeg_dev *jpeg = ctx->jpeg; + struct vb2_buffer *src_buf, *dst_buf; + enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR; + unsigned long flags; + struct mtk_jpeg_src_buf *jpeg_src_buf; + struct mtk_jpeg_bs bs; + struct mtk_jpeg_fb fb; + int i; + + src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx); + jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf); + + if (jpeg_src_buf->flags & MTK_JPEG_BUF_FLAGS_LAST_FRAME) { + for (i = 0; i < dst_buf->num_planes; i++) + vb2_set_plane_payload(dst_buf, i, 0); + buf_state = VB2_BUF_STATE_DONE; + goto dec_end; + } + + if (mtk_jpeg_check_resolution_change(ctx, &jpeg_src_buf->dec_param)) { + mtk_jpeg_queue_src_chg_event(ctx); + ctx->state = MTK_JPEG_SOURCE_CHANGE; + v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx); + return; + } + + mtk_jpeg_set_dec_src(ctx, src_buf, &bs); + if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param, dst_buf, &fb)) + goto dec_end; + + spin_lock_irqsave(&jpeg->hw_lock, flags); + mtk_jpeg_dec_reset(jpeg->dec_reg_base); + mtk_jpeg_dec_set_config(jpeg->dec_reg_base, + &jpeg_src_buf->dec_param, &bs, &fb); + + mtk_jpeg_dec_start(jpeg->dec_reg_base); + spin_unlock_irqrestore(&jpeg->hw_lock, flags); + return; + +dec_end: + v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); + v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state); + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state); + v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx); +} + +static int mtk_jpeg_job_ready(void *priv) +{ + struct mtk_jpeg_ctx *ctx = priv; + + return (ctx->state == MTK_JPEG_RUNNING) ? 1 : 0; +} + +static void mtk_jpeg_job_abort(void *priv) +{ +} + +static struct v4l2_m2m_ops mtk_jpeg_m2m_ops = { + .device_run = mtk_jpeg_device_run, + .job_ready = mtk_jpeg_job_ready, + .job_abort = mtk_jpeg_job_abort, +}; + +static int mtk_jpeg_queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct mtk_jpeg_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_DMABUF | VB2_MMAP; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct mtk_jpeg_src_buf); + src_vq->ops = &mtk_jpeg_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + src_vq->lock = &ctx->jpeg->lock; + src_vq->dev = ctx->jpeg->dev; + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_DMABUF | VB2_MMAP; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &mtk_jpeg_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + dst_vq->lock = &ctx->jpeg->lock; + dst_vq->dev = ctx->jpeg->dev; + ret = vb2_queue_init(dst_vq); + + return ret; +} + +static void mtk_jpeg_clk_on(struct mtk_jpeg_dev *jpeg) +{ + int ret; + + ret = mtk_smi_larb_get(jpeg->larb); + if (ret) + dev_err(jpeg->dev, "mtk_smi_larb_get larbvdec fail %d\n", ret); + clk_prepare_enable(jpeg->clk_jdec_smi); + clk_prepare_enable(jpeg->clk_jdec); +} + +static void mtk_jpeg_clk_off(struct mtk_jpeg_dev *jpeg) +{ + clk_disable_unprepare(jpeg->clk_jdec); + clk_disable_unprepare(jpeg->clk_jdec_smi); + mtk_smi_larb_put(jpeg->larb); +} + +static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv) +{ + struct mtk_jpeg_dev *jpeg = priv; + struct mtk_jpeg_ctx *ctx; + struct vb2_buffer *src_buf, *dst_buf; + struct mtk_jpeg_src_buf *jpeg_src_buf; + enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR; + u32 dec_irq_ret; + u32 dec_ret; + int i; + + dec_ret = mtk_jpeg_dec_get_int_status(jpeg->dec_reg_base); + dec_irq_ret = mtk_jpeg_dec_enum_result(dec_ret); + ctx = v4l2_m2m_get_curr_priv(jpeg->m2m_dev); + if (!ctx) { + v4l2_err(&jpeg->v4l2_dev, "Context is NULL\n"); + return IRQ_HANDLED; + } + + src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); + dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); + jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(src_buf); + + if (dec_irq_ret >= MTK_JPEG_DEC_RESULT_UNDERFLOW) + mtk_jpeg_dec_reset(jpeg->dec_reg_base); + + if (dec_irq_ret != MTK_JPEG_DEC_RESULT_EOF_DONE) { + dev_err(jpeg->dev, "decode failed\n"); + goto dec_end; + } + + for (i = 0; i < dst_buf->num_planes; i++) + vb2_set_plane_payload(dst_buf, i, + jpeg_src_buf->dec_param.comp_size[i]); + + buf_state = VB2_BUF_STATE_DONE; + +dec_end: + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), buf_state); + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), buf_state); + v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx); + return IRQ_HANDLED; +} + +static void mtk_jpeg_set_default_params(struct mtk_jpeg_ctx *ctx) +{ + struct mtk_jpeg_q_data *q = &ctx->out_q; + int i; + + ctx->colorspace = V4L2_COLORSPACE_JPEG, + ctx->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + ctx->quantization = V4L2_QUANTIZATION_DEFAULT; + ctx->xfer_func = V4L2_XFER_FUNC_DEFAULT; + + q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_JPEG, + MTK_JPEG_FMT_TYPE_OUTPUT); + q->w = MTK_JPEG_MIN_WIDTH; + q->h = MTK_JPEG_MIN_HEIGHT; + q->bytesperline[0] = 0; + q->sizeimage[0] = MTK_JPEG_DEFAULT_SIZEIMAGE; + + q = &ctx->cap_q; + q->fmt = mtk_jpeg_find_format(ctx, V4L2_PIX_FMT_YUV420M, + MTK_JPEG_FMT_TYPE_CAPTURE); + q->w = MTK_JPEG_MIN_WIDTH; + q->h = MTK_JPEG_MIN_HEIGHT; + + for (i = 0; i < q->fmt->colplanes; i++) { + u32 stride = q->w * q->fmt->h_sample[i] / 4; + u32 h = q->h * q->fmt->v_sample[i] / 4; + + q->bytesperline[i] = stride; + q->sizeimage[i] = stride * h; + } +} + +static int mtk_jpeg_open(struct file *file) +{ + struct mtk_jpeg_dev *jpeg = video_drvdata(file); + struct video_device *vfd = video_devdata(file); + struct mtk_jpeg_ctx *ctx; + int ret = 0; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + if (mutex_lock_interruptible(&jpeg->lock)) { + ret = -ERESTARTSYS; + goto free; + } + + v4l2_fh_init(&ctx->fh, vfd); + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + + ctx->jpeg = jpeg; + ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(jpeg->m2m_dev, ctx, + mtk_jpeg_queue_init); + if (IS_ERR(ctx->fh.m2m_ctx)) { + ret = PTR_ERR(ctx->fh.m2m_ctx); + goto error; + } + + mtk_jpeg_set_default_params(ctx); + mutex_unlock(&jpeg->lock); + return 0; + +error: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + mutex_unlock(&jpeg->lock); +free: + kfree(ctx); + return ret; +} + +static int mtk_jpeg_release(struct file *file) +{ + struct mtk_jpeg_dev *jpeg = video_drvdata(file); + struct mtk_jpeg_ctx *ctx = mtk_jpeg_fh_to_ctx(file->private_data); + + mutex_lock(&jpeg->lock); + v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + mutex_unlock(&jpeg->lock); + return 0; +} + +static const struct v4l2_file_operations mtk_jpeg_fops = { + .owner = THIS_MODULE, + .open = mtk_jpeg_open, + .release = mtk_jpeg_release, + .poll = v4l2_m2m_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = v4l2_m2m_fop_mmap, +}; + +static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg) +{ + struct device_node *node; + struct platform_device *pdev; + + node = of_parse_phandle(jpeg->dev->of_node, "mediatek,larb", 0); + if (!node) + return -EINVAL; + pdev = of_find_device_by_node(node); + if (WARN_ON(!pdev)) { + of_node_put(node); + return -EINVAL; + } + of_node_put(node); + + jpeg->larb = &pdev->dev; + + jpeg->clk_jdec = devm_clk_get(jpeg->dev, "jpgdec"); + if (IS_ERR(jpeg->clk_jdec)) + return -EINVAL; + + jpeg->clk_jdec_smi = devm_clk_get(jpeg->dev, "jpgdec-smi"); + if (IS_ERR(jpeg->clk_jdec_smi)) + return -EINVAL; + + return 0; +} + +static int mtk_jpeg_probe(struct platform_device *pdev) +{ + struct mtk_jpeg_dev *jpeg; + struct resource *res; + int dec_irq; + int ret; + + jpeg = devm_kzalloc(&pdev->dev, sizeof(*jpeg), GFP_KERNEL); + if (!jpeg) + return -ENOMEM; + + mutex_init(&jpeg->lock); + spin_lock_init(&jpeg->hw_lock); + jpeg->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + jpeg->dec_reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(jpeg->dec_reg_base)) { + ret = PTR_ERR(jpeg->dec_reg_base); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + dec_irq = platform_get_irq(pdev, 0); + if (!res || dec_irq < 0) { + dev_err(&pdev->dev, "Failed to get dec_irq %d.\n", dec_irq); + ret = -EINVAL; + return ret; + } + + ret = devm_request_irq(&pdev->dev, dec_irq, mtk_jpeg_dec_irq, 0, + pdev->name, jpeg); + if (ret) { + dev_err(&pdev->dev, "Failed to request dec_irq %d (%d)\n", + dec_irq, ret); + ret = -EINVAL; + goto err_req_irq; + } + + ret = mtk_jpeg_clk_init(jpeg); + if (ret) { + dev_err(&pdev->dev, "Failed to init clk, err %d\n", ret); + goto err_clk_init; + } + + ret = v4l2_device_register(&pdev->dev, &jpeg->v4l2_dev); + if (ret) { + dev_err(&pdev->dev, "Failed to register v4l2 device\n"); + ret = -EINVAL; + goto err_dev_register; + } + + jpeg->m2m_dev = v4l2_m2m_init(&mtk_jpeg_m2m_ops); + if (IS_ERR(jpeg->m2m_dev)) { + v4l2_err(&jpeg->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(jpeg->m2m_dev); + goto err_m2m_init; + } + + jpeg->dec_vdev = video_device_alloc(); + if (!jpeg->dec_vdev) { + ret = -ENOMEM; + goto err_dec_vdev_alloc; + } + snprintf(jpeg->dec_vdev->name, sizeof(jpeg->dec_vdev->name), + "%s-dec", MTK_JPEG_NAME); + jpeg->dec_vdev->fops = &mtk_jpeg_fops; + jpeg->dec_vdev->ioctl_ops = &mtk_jpeg_ioctl_ops; + jpeg->dec_vdev->minor = -1; + jpeg->dec_vdev->release = video_device_release; + jpeg->dec_vdev->lock = &jpeg->lock; + jpeg->dec_vdev->v4l2_dev = &jpeg->v4l2_dev; + jpeg->dec_vdev->vfl_dir = VFL_DIR_M2M; + jpeg->dec_vdev->device_caps = V4L2_CAP_STREAMING | + V4L2_CAP_VIDEO_M2M_MPLANE; + + ret = video_register_device(jpeg->dec_vdev, VFL_TYPE_GRABBER, 3); + if (ret) { + v4l2_err(&jpeg->v4l2_dev, "Failed to register video device\n"); + goto err_dec_vdev_register; + } + + video_set_drvdata(jpeg->dec_vdev, jpeg); + v4l2_info(&jpeg->v4l2_dev, + "decoder device registered as /dev/video%d (%d,%d)\n", + jpeg->dec_vdev->num, VIDEO_MAJOR, jpeg->dec_vdev->minor); + + platform_set_drvdata(pdev, jpeg); + + pm_runtime_enable(&pdev->dev); + + return 0; + +err_dec_vdev_register: + video_device_release(jpeg->dec_vdev); + +err_dec_vdev_alloc: + v4l2_m2m_release(jpeg->m2m_dev); + +err_m2m_init: + v4l2_device_unregister(&jpeg->v4l2_dev); + +err_dev_register: + +err_clk_init: + +err_req_irq: + + return ret; +} + +static int mtk_jpeg_remove(struct platform_device *pdev) +{ + struct mtk_jpeg_dev *jpeg = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + video_unregister_device(jpeg->dec_vdev); + video_device_release(jpeg->dec_vdev); + v4l2_m2m_release(jpeg->m2m_dev); + v4l2_device_unregister(&jpeg->v4l2_dev); + + return 0; +} + +static __maybe_unused int mtk_jpeg_pm_suspend(struct device *dev) +{ + struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev); + + mtk_jpeg_dec_reset(jpeg->dec_reg_base); + mtk_jpeg_clk_off(jpeg); + + return 0; +} + +static __maybe_unused int mtk_jpeg_pm_resume(struct device *dev) +{ + struct mtk_jpeg_dev *jpeg = dev_get_drvdata(dev); + + mtk_jpeg_clk_on(jpeg); + mtk_jpeg_dec_reset(jpeg->dec_reg_base); + + return 0; +} + +static __maybe_unused int mtk_jpeg_suspend(struct device *dev) +{ + int ret; + + if (pm_runtime_suspended(dev)) + return 0; + + ret = mtk_jpeg_pm_suspend(dev); + return ret; +} + +static __maybe_unused int mtk_jpeg_resume(struct device *dev) +{ + int ret; + + if (pm_runtime_suspended(dev)) + return 0; + + ret = mtk_jpeg_pm_resume(dev); + + return ret; +} + +static const struct dev_pm_ops mtk_jpeg_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mtk_jpeg_suspend, mtk_jpeg_resume) + SET_RUNTIME_PM_OPS(mtk_jpeg_pm_suspend, mtk_jpeg_pm_resume, NULL) +}; + +static const struct of_device_id mtk_jpeg_match[] = { + { + .compatible = "mediatek,mt8173-jpgdec", + .data = NULL, + }, + { + .compatible = "mediatek,mt2701-jpgdec", + .data = NULL, + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, mtk_jpeg_match); + +static struct platform_driver mtk_jpeg_driver = { + .probe = mtk_jpeg_probe, + .remove = mtk_jpeg_remove, + .driver = { + .name = MTK_JPEG_NAME, + .of_match_table = mtk_jpeg_match, + .pm = &mtk_jpeg_pm_ops, + }, +}; + +module_platform_driver(mtk_jpeg_driver); + +MODULE_DESCRIPTION("MediaTek JPEG codec driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h new file mode 100644 index 000000000000..1a6cdfd4ea70 --- /dev/null +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h @@ -0,0 +1,139 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * Rick Chang <rick.chang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MTK_JPEG_CORE_H +#define _MTK_JPEG_CORE_H + +#include <linux/interrupt.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-fh.h> + +#define MTK_JPEG_NAME "mtk-jpeg" + +#define MTK_JPEG_FMT_FLAG_DEC_OUTPUT BIT(0) +#define MTK_JPEG_FMT_FLAG_DEC_CAPTURE BIT(1) + +#define MTK_JPEG_FMT_TYPE_OUTPUT 1 +#define MTK_JPEG_FMT_TYPE_CAPTURE 2 + +#define MTK_JPEG_MIN_WIDTH 32 +#define MTK_JPEG_MIN_HEIGHT 32 +#define MTK_JPEG_MAX_WIDTH 8192 +#define MTK_JPEG_MAX_HEIGHT 8192 + +#define MTK_JPEG_DEFAULT_SIZEIMAGE (1 * 1024 * 1024) + +enum mtk_jpeg_ctx_state { + MTK_JPEG_INIT = 0, + MTK_JPEG_RUNNING, + MTK_JPEG_SOURCE_CHANGE, +}; + +/** + * struct mt_jpeg - JPEG IP abstraction + * @lock: the mutex protecting this structure + * @hw_lock: spinlock protecting the hw device resource + * @workqueue: decode work queue + * @dev: JPEG device + * @v4l2_dev: v4l2 device for mem2mem mode + * @m2m_dev: v4l2 mem2mem device data + * @alloc_ctx: videobuf2 memory allocator's context + * @dec_vdev: video device node for decoder mem2mem mode + * @dec_reg_base: JPEG registers mapping + * @clk_jdec: JPEG hw working clock + * @clk_jdec_smi: JPEG SMI bus clock + * @larb: SMI device + */ +struct mtk_jpeg_dev { + struct mutex lock; + spinlock_t hw_lock; + struct workqueue_struct *workqueue; + struct device *dev; + struct v4l2_device v4l2_dev; + struct v4l2_m2m_dev *m2m_dev; + void *alloc_ctx; + struct video_device *dec_vdev; + void __iomem *dec_reg_base; + struct clk *clk_jdec; + struct clk *clk_jdec_smi; + struct device *larb; +}; + +/** + * struct jpeg_fmt - driver's internal color format data + * @fourcc: the fourcc code, 0 if not applicable + * @h_sample: horizontal sample count of plane in 4 * 4 pixel image + * @v_sample: vertical sample count of plane in 4 * 4 pixel image + * @colplanes: number of color planes (1 for packed formats) + * @h_align: horizontal alignment order (align to 2^h_align) + * @v_align: vertical alignment order (align to 2^v_align) + * @flags: flags describing format applicability + */ +struct mtk_jpeg_fmt { + u32 fourcc; + int h_sample[VIDEO_MAX_PLANES]; + int v_sample[VIDEO_MAX_PLANES]; + int colplanes; + int h_align; + int v_align; + u32 flags; +}; + +/** + * mtk_jpeg_q_data - parameters of one queue + * @fmt: driver-specific format of this queue + * @w: image width + * @h: image height + * @bytesperline: distance in bytes between the leftmost pixels in two adjacent + * lines + * @sizeimage: image buffer size in bytes + */ +struct mtk_jpeg_q_data { + struct mtk_jpeg_fmt *fmt; + u32 w; + u32 h; + u32 bytesperline[VIDEO_MAX_PLANES]; + u32 sizeimage[VIDEO_MAX_PLANES]; +}; + +/** + * mtk_jpeg_ctx - the device context data + * @jpeg: JPEG IP device for this context + * @out_q: source (output) queue information + * @cap_q: destination (capture) queue queue information + * @fh: V4L2 file handle + * @dec_param parameters for HW decoding + * @state: state of the context + * @header_valid: set if header has been parsed and valid + * @colorspace: enum v4l2_colorspace; supplemental to pixelformat + * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding + * @quantization: enum v4l2_quantization, colorspace quantization + * @xfer_func: enum v4l2_xfer_func, colorspace transfer function + */ +struct mtk_jpeg_ctx { + struct mtk_jpeg_dev *jpeg; + struct mtk_jpeg_q_data out_q; + struct mtk_jpeg_q_data cap_q; + struct v4l2_fh fh; + enum mtk_jpeg_ctx_state state; + + enum v4l2_colorspace colorspace; + enum v4l2_ycbcr_encoding ycbcr_enc; + enum v4l2_quantization quantization; + enum v4l2_xfer_func xfer_func; +}; + +#endif /* _MTK_JPEG_CORE_H */ diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c new file mode 100644 index 000000000000..77b4cc6a8873 --- /dev/null +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.c @@ -0,0 +1,417 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * Rick Chang <rick.chang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <media/videobuf2-core.h> + +#include "mtk_jpeg_hw.h" + +#define MTK_JPEG_DUNUM_MASK(val) (((val) - 1) & 0x3) + +enum mtk_jpeg_color { + MTK_JPEG_COLOR_420 = 0x00221111, + MTK_JPEG_COLOR_422 = 0x00211111, + MTK_JPEG_COLOR_444 = 0x00111111, + MTK_JPEG_COLOR_422V = 0x00121111, + MTK_JPEG_COLOR_422X2 = 0x00412121, + MTK_JPEG_COLOR_422VX2 = 0x00222121, + MTK_JPEG_COLOR_400 = 0x00110000 +}; + +static inline int mtk_jpeg_verify_align(u32 val, int align, u32 reg) +{ + if (val & (align - 1)) { + pr_err("mtk-jpeg: write reg %x without %d align\n", reg, align); + return -1; + } + + return 0; +} + +static int mtk_jpeg_decide_format(struct mtk_jpeg_dec_param *param) +{ + param->src_color = (param->sampling_w[0] << 20) | + (param->sampling_h[0] << 16) | + (param->sampling_w[1] << 12) | + (param->sampling_h[1] << 8) | + (param->sampling_w[2] << 4) | + (param->sampling_h[2]); + + param->uv_brz_w = 0; + switch (param->src_color) { + case MTK_JPEG_COLOR_444: + param->uv_brz_w = 1; + param->dst_fourcc = V4L2_PIX_FMT_YUV422M; + break; + case MTK_JPEG_COLOR_422X2: + case MTK_JPEG_COLOR_422: + param->dst_fourcc = V4L2_PIX_FMT_YUV422M; + break; + case MTK_JPEG_COLOR_422V: + case MTK_JPEG_COLOR_422VX2: + param->uv_brz_w = 1; + param->dst_fourcc = V4L2_PIX_FMT_YUV420M; + break; + case MTK_JPEG_COLOR_420: + param->dst_fourcc = V4L2_PIX_FMT_YUV420M; + break; + case MTK_JPEG_COLOR_400: + param->dst_fourcc = V4L2_PIX_FMT_GREY; + break; + default: + param->dst_fourcc = 0; + return -1; + } + + return 0; +} + +static void mtk_jpeg_calc_mcu(struct mtk_jpeg_dec_param *param) +{ + u32 factor_w, factor_h; + u32 i, comp, blk; + + factor_w = 2 + param->sampling_w[0]; + factor_h = 2 + param->sampling_h[0]; + param->mcu_w = (param->pic_w + (1 << factor_w) - 1) >> factor_w; + param->mcu_h = (param->pic_h + (1 << factor_h) - 1) >> factor_h; + param->total_mcu = param->mcu_w * param->mcu_h; + param->unit_num = ((param->pic_w + 7) >> 3) * ((param->pic_h + 7) >> 3); + param->blk_num = 0; + for (i = 0; i < MTK_JPEG_COMP_MAX; i++) { + param->blk_comp[i] = 0; + if (i >= param->comp_num) + continue; + param->blk_comp[i] = param->sampling_w[i] * + param->sampling_h[i]; + param->blk_num += param->blk_comp[i]; + } + + param->membership = 0; + for (i = 0, blk = 0, comp = 0; i < MTK_JPEG_BLOCK_MAX; i++) { + if (i < param->blk_num && comp < param->comp_num) { + u32 tmp; + + tmp = (0x04 + (comp & 0x3)); + param->membership |= tmp << (i * 3); + if (++blk == param->blk_comp[comp]) { + comp++; + blk = 0; + } + } else { + param->membership |= 7 << (i * 3); + } + } +} + +static void mtk_jpeg_calc_dma_group(struct mtk_jpeg_dec_param *param) +{ + u32 factor_mcu = 3; + + if (param->src_color == MTK_JPEG_COLOR_444 && + param->dst_fourcc == V4L2_PIX_FMT_YUV422M) + factor_mcu = 4; + else if (param->src_color == MTK_JPEG_COLOR_422V && + param->dst_fourcc == V4L2_PIX_FMT_YUV420M) + factor_mcu = 4; + else if (param->src_color == MTK_JPEG_COLOR_422X2 && + param->dst_fourcc == V4L2_PIX_FMT_YUV422M) + factor_mcu = 2; + else if (param->src_color == MTK_JPEG_COLOR_400 || + (param->src_color & 0x0FFFF) == 0) + factor_mcu = 4; + + param->dma_mcu = 1 << factor_mcu; + param->dma_group = param->mcu_w / param->dma_mcu; + param->dma_last_mcu = param->mcu_w % param->dma_mcu; + if (param->dma_last_mcu) + param->dma_group++; + else + param->dma_last_mcu = param->dma_mcu; +} + +static int mtk_jpeg_calc_dst_size(struct mtk_jpeg_dec_param *param) +{ + u32 i, padding_w; + u32 ds_row_h[3]; + u32 brz_w[3]; + + brz_w[0] = 0; + brz_w[1] = param->uv_brz_w; + brz_w[2] = brz_w[1]; + + for (i = 0; i < param->comp_num; i++) { + if (brz_w[i] > 3) + return -1; + + padding_w = param->mcu_w * MTK_JPEG_DCTSIZE * + param->sampling_w[i]; + /* output format is 420/422 */ + param->comp_w[i] = padding_w >> brz_w[i]; + param->comp_w[i] = mtk_jpeg_align(param->comp_w[i], + MTK_JPEG_DCTSIZE); + param->img_stride[i] = i ? mtk_jpeg_align(param->comp_w[i], 16) + : mtk_jpeg_align(param->comp_w[i], 32); + ds_row_h[i] = (MTK_JPEG_DCTSIZE * param->sampling_h[i]); + } + param->dec_w = param->img_stride[0]; + param->dec_h = ds_row_h[0] * param->mcu_h; + + for (i = 0; i < MTK_JPEG_COMP_MAX; i++) { + /* They must be equal in frame mode. */ + param->mem_stride[i] = param->img_stride[i]; + param->comp_size[i] = param->mem_stride[i] * ds_row_h[i] * + param->mcu_h; + } + + param->y_size = param->comp_size[0]; + param->uv_size = param->comp_size[1]; + param->dec_size = param->y_size + (param->uv_size << 1); + + return 0; +} + +int mtk_jpeg_dec_fill_param(struct mtk_jpeg_dec_param *param) +{ + if (mtk_jpeg_decide_format(param)) + return -1; + + mtk_jpeg_calc_mcu(param); + mtk_jpeg_calc_dma_group(param); + if (mtk_jpeg_calc_dst_size(param)) + return -2; + + return 0; +} + +u32 mtk_jpeg_dec_get_int_status(void __iomem *base) +{ + u32 ret; + + ret = readl(base + JPGDEC_REG_INTERRUPT_STATUS) & BIT_INQST_MASK_ALLIRQ; + if (ret) + writel(ret, base + JPGDEC_REG_INTERRUPT_STATUS); + + return ret; +} + +u32 mtk_jpeg_dec_enum_result(u32 irq_result) +{ + if (irq_result & BIT_INQST_MASK_EOF) + return MTK_JPEG_DEC_RESULT_EOF_DONE; + if (irq_result & BIT_INQST_MASK_PAUSE) + return MTK_JPEG_DEC_RESULT_PAUSE; + if (irq_result & BIT_INQST_MASK_UNDERFLOW) + return MTK_JPEG_DEC_RESULT_UNDERFLOW; + if (irq_result & BIT_INQST_MASK_OVERFLOW) + return MTK_JPEG_DEC_RESULT_OVERFLOW; + if (irq_result & BIT_INQST_MASK_ERROR_BS) + return MTK_JPEG_DEC_RESULT_ERROR_BS; + + return MTK_JPEG_DEC_RESULT_ERROR_UNKNOWN; +} + +void mtk_jpeg_dec_start(void __iomem *base) +{ + writel(0, base + JPGDEC_REG_TRIG); +} + +static void mtk_jpeg_dec_soft_reset(void __iomem *base) +{ + writel(0x0000FFFF, base + JPGDEC_REG_INTERRUPT_STATUS); + writel(0x00, base + JPGDEC_REG_RESET); + writel(0x01, base + JPGDEC_REG_RESET); +} + +static void mtk_jpeg_dec_hard_reset(void __iomem *base) +{ + writel(0x00, base + JPGDEC_REG_RESET); + writel(0x10, base + JPGDEC_REG_RESET); +} + +void mtk_jpeg_dec_reset(void __iomem *base) +{ + mtk_jpeg_dec_soft_reset(base); + mtk_jpeg_dec_hard_reset(base); +} + +static void mtk_jpeg_dec_set_brz_factor(void __iomem *base, u8 yscale_w, + u8 yscale_h, u8 uvscale_w, u8 uvscale_h) +{ + u32 val; + + val = (uvscale_h << 12) | (uvscale_w << 8) | + (yscale_h << 4) | yscale_w; + writel(val, base + JPGDEC_REG_BRZ_FACTOR); +} + +static void mtk_jpeg_dec_set_dst_bank0(void __iomem *base, u32 addr_y, + u32 addr_u, u32 addr_v) +{ + mtk_jpeg_verify_align(addr_y, 16, JPGDEC_REG_DEST_ADDR0_Y); + writel(addr_y, base + JPGDEC_REG_DEST_ADDR0_Y); + mtk_jpeg_verify_align(addr_u, 16, JPGDEC_REG_DEST_ADDR0_U); + writel(addr_u, base + JPGDEC_REG_DEST_ADDR0_U); + mtk_jpeg_verify_align(addr_v, 16, JPGDEC_REG_DEST_ADDR0_V); + writel(addr_v, base + JPGDEC_REG_DEST_ADDR0_V); +} + +static void mtk_jpeg_dec_set_dst_bank1(void __iomem *base, u32 addr_y, + u32 addr_u, u32 addr_v) +{ + writel(addr_y, base + JPGDEC_REG_DEST_ADDR1_Y); + writel(addr_u, base + JPGDEC_REG_DEST_ADDR1_U); + writel(addr_v, base + JPGDEC_REG_DEST_ADDR1_V); +} + +static void mtk_jpeg_dec_set_mem_stride(void __iomem *base, u32 stride_y, + u32 stride_uv) +{ + writel((stride_y & 0xFFFF), base + JPGDEC_REG_STRIDE_Y); + writel((stride_uv & 0xFFFF), base + JPGDEC_REG_STRIDE_UV); +} + +static void mtk_jpeg_dec_set_img_stride(void __iomem *base, u32 stride_y, + u32 stride_uv) +{ + writel((stride_y & 0xFFFF), base + JPGDEC_REG_IMG_STRIDE_Y); + writel((stride_uv & 0xFFFF), base + JPGDEC_REG_IMG_STRIDE_UV); +} + +static void mtk_jpeg_dec_set_pause_mcu_idx(void __iomem *base, u32 idx) +{ + writel(idx & 0x0003FFFFFF, base + JPGDEC_REG_PAUSE_MCU_NUM); +} + +static void mtk_jpeg_dec_set_dec_mode(void __iomem *base, u32 mode) +{ + writel(mode & 0x03, base + JPGDEC_REG_OPERATION_MODE); +} + +static void mtk_jpeg_dec_set_bs_write_ptr(void __iomem *base, u32 ptr) +{ + mtk_jpeg_verify_align(ptr, 16, JPGDEC_REG_FILE_BRP); + writel(ptr, base + JPGDEC_REG_FILE_BRP); +} + +static void mtk_jpeg_dec_set_bs_info(void __iomem *base, u32 addr, u32 size) +{ + mtk_jpeg_verify_align(addr, 16, JPGDEC_REG_FILE_ADDR); + mtk_jpeg_verify_align(size, 128, JPGDEC_REG_FILE_TOTAL_SIZE); + writel(addr, base + JPGDEC_REG_FILE_ADDR); + writel(size, base + JPGDEC_REG_FILE_TOTAL_SIZE); +} + +static void mtk_jpeg_dec_set_comp_id(void __iomem *base, u32 id_y, u32 id_u, + u32 id_v) +{ + u32 val; + + val = ((id_y & 0x00FF) << 24) | ((id_u & 0x00FF) << 16) | + ((id_v & 0x00FF) << 8); + writel(val, base + JPGDEC_REG_COMP_ID); +} + +static void mtk_jpeg_dec_set_total_mcu(void __iomem *base, u32 num) +{ + writel(num - 1, base + JPGDEC_REG_TOTAL_MCU_NUM); +} + +static void mtk_jpeg_dec_set_comp0_du(void __iomem *base, u32 num) +{ + writel(num - 1, base + JPGDEC_REG_COMP0_DATA_UNIT_NUM); +} + +static void mtk_jpeg_dec_set_du_membership(void __iomem *base, u32 member, + u32 gmc, u32 isgray) +{ + if (isgray) + member = 0x3FFFFFFC; + member |= (isgray << 31) | (gmc << 30); + writel(member, base + JPGDEC_REG_DU_CTRL); +} + +static void mtk_jpeg_dec_set_q_table(void __iomem *base, u32 id0, u32 id1, + u32 id2) +{ + u32 val; + + val = ((id0 & 0x0f) << 8) | ((id1 & 0x0f) << 4) | ((id2 & 0x0f) << 0); + writel(val, base + JPGDEC_REG_QT_ID); +} + +static void mtk_jpeg_dec_set_dma_group(void __iomem *base, u32 mcu_group, + u32 group_num, u32 last_mcu) +{ + u32 val; + + val = (((mcu_group - 1) & 0x00FF) << 16) | + (((group_num - 1) & 0x007F) << 8) | + ((last_mcu - 1) & 0x00FF); + writel(val, base + JPGDEC_REG_WDMA_CTRL); +} + +static void mtk_jpeg_dec_set_sampling_factor(void __iomem *base, u32 comp_num, + u32 y_w, u32 y_h, u32 u_w, + u32 u_h, u32 v_w, u32 v_h) +{ + u32 val; + u32 y_wh = (MTK_JPEG_DUNUM_MASK(y_w) << 2) | MTK_JPEG_DUNUM_MASK(y_h); + u32 u_wh = (MTK_JPEG_DUNUM_MASK(u_w) << 2) | MTK_JPEG_DUNUM_MASK(u_h); + u32 v_wh = (MTK_JPEG_DUNUM_MASK(v_w) << 2) | MTK_JPEG_DUNUM_MASK(v_h); + + if (comp_num == 1) + val = 0; + else + val = (y_wh << 8) | (u_wh << 4) | v_wh; + writel(val, base + JPGDEC_REG_DU_NUM); +} + +void mtk_jpeg_dec_set_config(void __iomem *base, + struct mtk_jpeg_dec_param *config, + struct mtk_jpeg_bs *bs, + struct mtk_jpeg_fb *fb) +{ + mtk_jpeg_dec_set_brz_factor(base, 0, 0, config->uv_brz_w, 0); + mtk_jpeg_dec_set_dec_mode(base, 0); + mtk_jpeg_dec_set_comp0_du(base, config->unit_num); + mtk_jpeg_dec_set_total_mcu(base, config->total_mcu); + mtk_jpeg_dec_set_bs_info(base, bs->str_addr, bs->size); + mtk_jpeg_dec_set_bs_write_ptr(base, bs->end_addr); + mtk_jpeg_dec_set_du_membership(base, config->membership, 1, + (config->comp_num == 1) ? 1 : 0); + mtk_jpeg_dec_set_comp_id(base, config->comp_id[0], config->comp_id[1], + config->comp_id[2]); + mtk_jpeg_dec_set_q_table(base, config->qtbl_num[0], + config->qtbl_num[1], config->qtbl_num[2]); + mtk_jpeg_dec_set_sampling_factor(base, config->comp_num, + config->sampling_w[0], + config->sampling_h[0], + config->sampling_w[1], + config->sampling_h[1], + config->sampling_w[2], + config->sampling_h[2]); + mtk_jpeg_dec_set_mem_stride(base, config->mem_stride[0], + config->mem_stride[1]); + mtk_jpeg_dec_set_img_stride(base, config->img_stride[0], + config->img_stride[1]); + mtk_jpeg_dec_set_dst_bank0(base, fb->plane_addr[0], + fb->plane_addr[1], fb->plane_addr[2]); + mtk_jpeg_dec_set_dst_bank1(base, 0, 0, 0); + mtk_jpeg_dec_set_dma_group(base, config->dma_mcu, config->dma_group, + config->dma_last_mcu); + mtk_jpeg_dec_set_pause_mcu_idx(base, config->total_mcu); +} diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h new file mode 100644 index 000000000000..37152a630dea --- /dev/null +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_hw.h @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * Rick Chang <rick.chang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MTK_JPEG_HW_H +#define _MTK_JPEG_HW_H + +#include <media/videobuf2-core.h> + +#include "mtk_jpeg_core.h" +#include "mtk_jpeg_reg.h" + +enum { + MTK_JPEG_DEC_RESULT_EOF_DONE = 0, + MTK_JPEG_DEC_RESULT_PAUSE = 1, + MTK_JPEG_DEC_RESULT_UNDERFLOW = 2, + MTK_JPEG_DEC_RESULT_OVERFLOW = 3, + MTK_JPEG_DEC_RESULT_ERROR_BS = 4, + MTK_JPEG_DEC_RESULT_ERROR_UNKNOWN = 6 +}; + +struct mtk_jpeg_dec_param { + u32 pic_w; + u32 pic_h; + u32 dec_w; + u32 dec_h; + u32 src_color; + u32 dst_fourcc; + u32 mcu_w; + u32 mcu_h; + u32 total_mcu; + u32 unit_num; + u32 comp_num; + u32 comp_id[MTK_JPEG_COMP_MAX]; + u32 sampling_w[MTK_JPEG_COMP_MAX]; + u32 sampling_h[MTK_JPEG_COMP_MAX]; + u32 qtbl_num[MTK_JPEG_COMP_MAX]; + u32 blk_num; + u32 blk_comp[MTK_JPEG_COMP_MAX]; + u32 membership; + u32 dma_mcu; + u32 dma_group; + u32 dma_last_mcu; + u32 img_stride[MTK_JPEG_COMP_MAX]; + u32 mem_stride[MTK_JPEG_COMP_MAX]; + u32 comp_w[MTK_JPEG_COMP_MAX]; + u32 comp_size[MTK_JPEG_COMP_MAX]; + u32 y_size; + u32 uv_size; + u32 dec_size; + u8 uv_brz_w; +}; + +static inline u32 mtk_jpeg_align(u32 val, u32 align) +{ + return (val + align - 1) & ~(align - 1); +} + +struct mtk_jpeg_bs { + dma_addr_t str_addr; + dma_addr_t end_addr; + size_t size; +}; + +struct mtk_jpeg_fb { + dma_addr_t plane_addr[MTK_JPEG_COMP_MAX]; + size_t size; +}; + +int mtk_jpeg_dec_fill_param(struct mtk_jpeg_dec_param *param); +u32 mtk_jpeg_dec_get_int_status(void __iomem *dec_reg_base); +u32 mtk_jpeg_dec_enum_result(u32 irq_result); +void mtk_jpeg_dec_set_config(void __iomem *base, + struct mtk_jpeg_dec_param *config, + struct mtk_jpeg_bs *bs, + struct mtk_jpeg_fb *fb); +void mtk_jpeg_dec_reset(void __iomem *dec_reg_base); +void mtk_jpeg_dec_start(void __iomem *dec_reg_base); + +#endif /* _MTK_JPEG_HW_H */ diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c new file mode 100644 index 000000000000..38868547f5d4 --- /dev/null +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.c @@ -0,0 +1,160 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * Rick Chang <rick.chang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/videodev2.h> + +#include "mtk_jpeg_parse.h" + +#define TEM 0x01 +#define SOF0 0xc0 +#define RST 0xd0 +#define SOI 0xd8 +#define EOI 0xd9 + +struct mtk_jpeg_stream { + u8 *addr; + u32 size; + u32 curr; +}; + +static int read_byte(struct mtk_jpeg_stream *stream) +{ + if (stream->curr >= stream->size) + return -1; + return stream->addr[stream->curr++]; +} + +static int read_word_be(struct mtk_jpeg_stream *stream, u32 *word) +{ + u32 temp; + int byte; + + byte = read_byte(stream); + if (byte == -1) + return -1; + temp = byte << 8; + byte = read_byte(stream); + if (byte == -1) + return -1; + *word = (u32)byte | temp; + + return 0; +} + +static void read_skip(struct mtk_jpeg_stream *stream, long len) +{ + if (len <= 0) + return; + while (len--) + read_byte(stream); +} + +static bool mtk_jpeg_do_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va, + u32 src_size) +{ + bool notfound = true; + struct mtk_jpeg_stream stream; + + stream.addr = src_addr_va; + stream.size = src_size; + stream.curr = 0; + + while (notfound) { + int i, length, byte; + u32 word; + + byte = read_byte(&stream); + if (byte == -1) + return false; + if (byte != 0xff) + continue; + do + byte = read_byte(&stream); + while (byte == 0xff); + if (byte == -1) + return false; + if (byte == 0) + continue; + + length = 0; + switch (byte) { + case SOF0: + /* length */ + if (read_word_be(&stream, &word)) + break; + + /* precision */ + if (read_byte(&stream) == -1) + break; + + if (read_word_be(&stream, &word)) + break; + param->pic_h = word; + + if (read_word_be(&stream, &word)) + break; + param->pic_w = word; + + param->comp_num = read_byte(&stream); + if (param->comp_num != 1 && param->comp_num != 3) + break; + + for (i = 0; i < param->comp_num; i++) { + param->comp_id[i] = read_byte(&stream); + if (param->comp_id[i] == -1) + break; + + /* sampling */ + byte = read_byte(&stream); + if (byte == -1) + break; + param->sampling_w[i] = (byte >> 4) & 0x0F; + param->sampling_h[i] = byte & 0x0F; + + param->qtbl_num[i] = read_byte(&stream); + if (param->qtbl_num[i] == -1) + break; + } + + notfound = !(i == param->comp_num); + break; + case RST ... RST + 7: + case SOI: + case EOI: + case TEM: + break; + default: + if (read_word_be(&stream, &word)) + break; + length = (long)word - 2; + read_skip(&stream, length); + break; + } + } + + return !notfound; +} + +bool mtk_jpeg_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va, + u32 src_size) +{ + if (!mtk_jpeg_do_parse(param, src_addr_va, src_size)) + return false; + if (mtk_jpeg_dec_fill_param(param)) + return false; + + return true; +} diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h new file mode 100644 index 000000000000..5d92340ea81b --- /dev/null +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_parse.h @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * Rick Chang <rick.chang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MTK_JPEG_PARSE_H +#define _MTK_JPEG_PARSE_H + +#include "mtk_jpeg_hw.h" + +bool mtk_jpeg_parse(struct mtk_jpeg_dec_param *param, u8 *src_addr_va, + u32 src_size); + +#endif /* _MTK_JPEG_PARSE_H */ + diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h new file mode 100644 index 000000000000..fc490d62b012 --- /dev/null +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_reg.h @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * Rick Chang <rick.chang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MTK_JPEG_REG_H +#define _MTK_JPEG_REG_H + +#define MTK_JPEG_COMP_MAX 3 +#define MTK_JPEG_BLOCK_MAX 10 +#define MTK_JPEG_DCTSIZE 8 + +#define BIT_INQST_MASK_ERROR_BS 0x20 +#define BIT_INQST_MASK_PAUSE 0x10 +#define BIT_INQST_MASK_OVERFLOW 0x04 +#define BIT_INQST_MASK_UNDERFLOW 0x02 +#define BIT_INQST_MASK_EOF 0x01 +#define BIT_INQST_MASK_ALLIRQ 0x37 + +#define JPGDEC_REG_RESET 0x0090 +#define JPGDEC_REG_BRZ_FACTOR 0x00F8 +#define JPGDEC_REG_DU_NUM 0x00FC +#define JPGDEC_REG_DEST_ADDR0_Y 0x0140 +#define JPGDEC_REG_DEST_ADDR0_U 0x0144 +#define JPGDEC_REG_DEST_ADDR0_V 0x0148 +#define JPGDEC_REG_DEST_ADDR1_Y 0x014C +#define JPGDEC_REG_DEST_ADDR1_U 0x0150 +#define JPGDEC_REG_DEST_ADDR1_V 0x0154 +#define JPGDEC_REG_STRIDE_Y 0x0158 +#define JPGDEC_REG_STRIDE_UV 0x015C +#define JPGDEC_REG_IMG_STRIDE_Y 0x0160 +#define JPGDEC_REG_IMG_STRIDE_UV 0x0164 +#define JPGDEC_REG_WDMA_CTRL 0x016C +#define JPGDEC_REG_PAUSE_MCU_NUM 0x0170 +#define JPGDEC_REG_OPERATION_MODE 0x017C +#define JPGDEC_REG_FILE_ADDR 0x0200 +#define JPGDEC_REG_COMP_ID 0x020C +#define JPGDEC_REG_TOTAL_MCU_NUM 0x0210 +#define JPGDEC_REG_COMP0_DATA_UNIT_NUM 0x0224 +#define JPGDEC_REG_DU_CTRL 0x023C +#define JPGDEC_REG_TRIG 0x0240 +#define JPGDEC_REG_FILE_BRP 0x0248 +#define JPGDEC_REG_FILE_TOTAL_SIZE 0x024C +#define JPGDEC_REG_QT_ID 0x0270 +#define JPGDEC_REG_INTERRUPT_STATUS 0x0274 +#define JPGDEC_REG_STATUS 0x0278 + +#endif /* _MTK_JPEG_REG_H */ diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c index 502877a4b1df..a60b538686ea 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c @@ -420,6 +420,11 @@ static void mtk_vdec_worker(struct work_struct *work) dst_buf->index, ret, res_chg); src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + if (ret == -EIO) { + mutex_lock(&ctx->lock); + src_buf_info->error = true; + mutex_unlock(&ctx->lock); + } v4l2_m2m_buf_done(&src_buf_info->vb, VB2_BUF_STATE_ERROR); } else if (res_chg == false) { /* @@ -1170,8 +1175,16 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb) */ src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); - v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), - VB2_BUF_STATE_DONE); + if (ret == -EIO) { + mtk_v4l2_err("[%d] Unrecoverable error in vdec_if_decode.", + ctx->id); + ctx->state = MTK_STATE_ABORT; + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), + VB2_BUF_STATE_ERROR); + } else { + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), + VB2_BUF_STATE_DONE); + } mtk_v4l2_debug(ret ? 0 : 1, "[%d] vdec_if_decode() src_buf=%d, size=%zu, fail=%d, res_chg=%d", ctx->id, src_buf->index, @@ -1216,16 +1229,22 @@ static void vb2ops_vdec_buf_finish(struct vb2_buffer *vb) struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); struct vb2_v4l2_buffer *vb2_v4l2; struct mtk_video_dec_buf *buf; - - if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) - return; + bool buf_error; vb2_v4l2 = container_of(vb, struct vb2_v4l2_buffer, vb2_buf); buf = container_of(vb2_v4l2, struct mtk_video_dec_buf, vb); mutex_lock(&ctx->lock); - buf->queued_in_v4l2 = false; - buf->queued_in_vb2 = false; + if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + buf->queued_in_v4l2 = false; + buf->queued_in_vb2 = false; + } + buf_error = buf->error; mutex_unlock(&ctx->lock); + + if (buf_error) { + mtk_v4l2_err("Unrecoverable error on buffer."); + ctx->state = MTK_STATE_ABORT; + } } static int vb2ops_vdec_buf_init(struct vb2_buffer *vb) diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h index 362f5a85762e..dc4fc1df63c5 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h @@ -50,6 +50,7 @@ struct vdec_fb { * @queued_in_v4l2: Capture buffer is in v4l2 driver, but not in vb2 * queue yet * @lastframe: Intput buffer is last buffer - EOS + * @error: An unrecoverable error occurs on this buffer. * @frame_buffer: Decode status, and buffer information of Capture buffer * * Note : These status information help us track and debug buffer state @@ -63,6 +64,7 @@ struct mtk_video_dec_buf { bool queued_in_vb2; bool queued_in_v4l2; bool lastframe; + bool error; struct vdec_fb frame_buffer; }; diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c index aa81f3ce9463..83f859e8509c 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c @@ -269,11 +269,6 @@ static int mtk_vcodec_probe(struct platform_device *pdev) for (i = VENC_SYS, j = 0; i < NUM_MAX_VCODEC_REG_BASE; i++, j++) { res = platform_get_resource(pdev, IORESOURCE_MEM, j); - if (res == NULL) { - dev_err(&pdev->dev, "get memory resource failed."); - ret = -ENXIO; - goto err_res; - } dev->reg_base[i] = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR((__force void *)dev->reg_base[i])) { ret = PTR_ERR((__force void *)dev->reg_base[i]); diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h index 7d55975d3185..237e144c194f 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h @@ -31,7 +31,6 @@ struct mtk_vcodec_dev; extern int mtk_v4l2_dbg_level; extern bool mtk_vcodec_dbg; -#define DEBUG 1 #if defined(DEBUG) @@ -67,15 +66,15 @@ extern bool mtk_vcodec_dbg; #else -#define mtk_v4l2_debug(level, fmt, args...) -#define mtk_v4l2_err(fmt, args...) -#define mtk_v4l2_debug_enter() -#define mtk_v4l2_debug_leave() +#define mtk_v4l2_debug(level, fmt, args...) {} +#define mtk_v4l2_err(fmt, args...) {} +#define mtk_v4l2_debug_enter() {} +#define mtk_v4l2_debug_leave() {} -#define mtk_vcodec_debug(h, fmt, args...) -#define mtk_vcodec_err(h, fmt, args...) -#define mtk_vcodec_debug_enter(h) -#define mtk_vcodec_debug_leave(h) +#define mtk_vcodec_debug(h, fmt, args...) {} +#define mtk_vcodec_err(h, fmt, args...) {} +#define mtk_vcodec_debug_enter(h) {} +#define mtk_vcodec_debug_leave(h) {} #endif diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c index e91a3b425b0c..5539b1853f16 100644 --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c @@ -718,6 +718,26 @@ static void get_free_fb(struct vdec_vp9_inst *inst, struct vdec_fb **out_fb) *out_fb = fb; } +static int validate_vsi_array_indexes(struct vdec_vp9_inst *inst, + struct vdec_vp9_vsi *vsi) { + if (vsi->sf_frm_idx >= VP9_MAX_FRM_BUF_NUM - 1) { + mtk_vcodec_err(inst, "Invalid vsi->sf_frm_idx=%u.", + vsi->sf_frm_idx); + return -EIO; + } + if (vsi->frm_to_show_idx >= VP9_MAX_FRM_BUF_NUM) { + mtk_vcodec_err(inst, "Invalid vsi->frm_to_show_idx=%u.", + vsi->frm_to_show_idx); + return -EIO; + } + if (vsi->new_fb_idx >= VP9_MAX_FRM_BUF_NUM) { + mtk_vcodec_err(inst, "Invalid vsi->new_fb_idx=%u.", + vsi->new_fb_idx); + return -EIO; + } + return 0; +} + static void vdec_vp9_deinit(unsigned long h_vdec) { struct vdec_vp9_inst *inst = (struct vdec_vp9_inst *)h_vdec; @@ -834,6 +854,12 @@ static int vdec_vp9_decode(unsigned long h_vdec, struct mtk_vcodec_mem *bs, goto DECODE_ERROR; } + ret = validate_vsi_array_indexes(inst, vsi); + if (ret) { + mtk_vcodec_err(inst, "Invalid values from VPU."); + goto DECODE_ERROR; + } + if (vsi->resolution_changed) { if (!vp9_alloc_work_buf(inst)) { ret = -EINVAL; diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h index db6b5205ffb1..ded1154481cd 100644 --- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h @@ -85,6 +85,8 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx); * @res_chg : [out] resolution change happens if current bs have different * picture width/height * Note: To flush the decoder when reaching EOF, set input bitstream as NULL. + * + * Return: 0 on success. -EIO on unrecoverable error. */ int vdec_if_decode(struct mtk_vcodec_ctx *ctx, struct mtk_vcodec_mem *bs, struct vdec_fb *fb, bool *res_chg); diff --git a/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c b/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c index a6fa145f2c54..acb639c4abd2 100644 --- a/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c +++ b/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c @@ -155,7 +155,7 @@ static void vp8_enc_free_work_buf(struct venc_vp8_inst *inst) /* Buffers need to be freed by AP. */ for (i = 0; i < VENC_VP8_VPU_WORK_BUF_MAX; i++) { - if ((inst->work_bufs[i].size == 0)) + if (inst->work_bufs[i].size == 0) continue; mtk_vcodec_mem_free(inst->ctx, &inst->work_bufs[i]); } @@ -172,7 +172,7 @@ static int vp8_enc_alloc_work_buf(struct venc_vp8_inst *inst) mtk_vcodec_debug_enter(inst); for (i = 0; i < VENC_VP8_VPU_WORK_BUF_MAX; i++) { - if ((wb[i].size == 0)) + if (wb[i].size == 0) continue; /* * This 'wb' structure is set by VPU side and shared to AP for diff --git a/drivers/staging/media/s5p-cec/Makefile b/drivers/media/platform/s5p-cec/Makefile index 0e2cf457825a..0e2cf457825a 100644 --- a/drivers/staging/media/s5p-cec/Makefile +++ b/drivers/media/platform/s5p-cec/Makefile diff --git a/drivers/staging/media/s5p-cec/exynos_hdmi_cec.h b/drivers/media/platform/s5p-cec/exynos_hdmi_cec.h index 7d9453505dce..7d9453505dce 100644 --- a/drivers/staging/media/s5p-cec/exynos_hdmi_cec.h +++ b/drivers/media/platform/s5p-cec/exynos_hdmi_cec.h diff --git a/drivers/staging/media/s5p-cec/exynos_hdmi_cecctrl.c b/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c index 1edf667d562a..1edf667d562a 100644 --- a/drivers/staging/media/s5p-cec/exynos_hdmi_cecctrl.c +++ b/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c diff --git a/drivers/staging/media/s5p-cec/regs-cec.h b/drivers/media/platform/s5p-cec/regs-cec.h index b2e7e129920e..b2e7e129920e 100644 --- a/drivers/staging/media/s5p-cec/regs-cec.h +++ b/drivers/media/platform/s5p-cec/regs-cec.h diff --git a/drivers/staging/media/s5p-cec/s5p_cec.c b/drivers/media/platform/s5p-cec/s5p_cec.c index 2a07968b5ac6..664937b61fa4 100644 --- a/drivers/staging/media/s5p-cec/s5p_cec.c +++ b/drivers/media/platform/s5p-cec/s5p_cec.c @@ -19,11 +19,13 @@ #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/timer.h> #include <linux/workqueue.h> #include <media/cec.h> +#include <media/cec-notifier.h> #include "exynos_hdmi_cec.h" #include "regs-cec.h" @@ -37,7 +39,7 @@ MODULE_PARM_DESC(debug, "debug level (0-2)"); static int s5p_cec_adap_enable(struct cec_adapter *adap, bool enable) { - struct s5p_cec_dev *cec = adap->priv; + struct s5p_cec_dev *cec = cec_get_drvdata(adap); if (enable) { pm_runtime_get_sync(cec->dev); @@ -61,7 +63,7 @@ static int s5p_cec_adap_enable(struct cec_adapter *adap, bool enable) static int s5p_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) { - struct s5p_cec_dev *cec = adap->priv; + struct s5p_cec_dev *cec = cec_get_drvdata(adap); s5p_cec_set_addr(cec, addr); return 0; @@ -70,7 +72,7 @@ static int s5p_cec_adap_log_addr(struct cec_adapter *adap, u8 addr) static int s5p_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg) { - struct s5p_cec_dev *cec = adap->priv; + struct s5p_cec_dev *cec = cec_get_drvdata(adap); /* * Unclear if 0 retries are allowed by the hardware, so have 1 as @@ -167,10 +169,22 @@ static const struct cec_adap_ops s5p_cec_adap_ops = { static int s5p_cec_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct device_node *np; + struct platform_device *hdmi_dev; struct resource *res; struct s5p_cec_dev *cec; int ret; + np = of_parse_phandle(pdev->dev.of_node, "hdmi-phandle", 0); + + if (!np) { + dev_err(&pdev->dev, "Failed to find hdmi node in device tree\n"); + return -ENODEV; + } + hdmi_dev = of_find_device_by_node(np); + if (hdmi_dev == NULL) + return -EPROBE_DEFER; + cec = devm_kzalloc(&pdev->dev, sizeof(*cec), GFP_KERNEL); if (!cec) return -ENOMEM; @@ -200,24 +214,33 @@ static int s5p_cec_probe(struct platform_device *pdev) if (IS_ERR(cec->reg)) return PTR_ERR(cec->reg); + cec->notifier = cec_notifier_get(&hdmi_dev->dev); + if (cec->notifier == NULL) + return -ENOMEM; + cec->adap = cec_allocate_adapter(&s5p_cec_adap_ops, cec, CEC_NAME, - CEC_CAP_PHYS_ADDR | CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT | + CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT | CEC_CAP_PASSTHROUGH | CEC_CAP_RC, 1); ret = PTR_ERR_OR_ZERO(cec->adap); if (ret) return ret; + ret = cec_register_adapter(cec->adap, &pdev->dev); - if (ret) { - cec_delete_adapter(cec->adap); - return ret; - } + if (ret) + goto err_delete_adapter; + + cec_register_cec_notifier(cec->adap, cec->notifier); platform_set_drvdata(pdev, cec); pm_runtime_enable(dev); dev_dbg(dev, "successfuly probed\n"); return 0; + +err_delete_adapter: + cec_delete_adapter(cec->adap); + return ret; } static int s5p_cec_remove(struct platform_device *pdev) @@ -225,6 +248,7 @@ static int s5p_cec_remove(struct platform_device *pdev) struct s5p_cec_dev *cec = platform_get_drvdata(pdev); cec_unregister_adapter(cec->adap); + cec_notifier_put(cec->notifier); pm_runtime_disable(&pdev->dev); return 0; } diff --git a/drivers/staging/media/s5p-cec/s5p_cec.h b/drivers/media/platform/s5p-cec/s5p_cec.h index 03732c13d19f..7015845c1caa 100644 --- a/drivers/staging/media/s5p-cec/s5p_cec.h +++ b/drivers/media/platform/s5p-cec/s5p_cec.h @@ -59,12 +59,15 @@ enum cec_state { STATE_ERROR }; +struct cec_notifier; + struct s5p_cec_dev { struct cec_adapter *adap; struct clk *clk; struct device *dev; struct mutex lock; struct regmap *pmu; + struct cec_notifier *notifier; int irq; void __iomem *reg; diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c index 62c0dec30b59..81ed5cd5cd5d 100644 --- a/drivers/media/platform/s5p-g2d/g2d.c +++ b/drivers/media/platform/s5p-g2d/g2d.c @@ -679,7 +679,7 @@ static int g2d_probe(struct platform_device *pdev) 0, pdev->name, dev); if (ret) { dev_err(&pdev->dev, "failed to install IRQ\n"); - goto put_clk_gate; + goto unprep_clk_gate; } vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v6.h b/drivers/media/platform/s5p-mfc/regs-mfc-v6.h index d2cd35916dc5..c0166ee9a455 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc-v6.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v6.h @@ -403,7 +403,7 @@ #define MFC_OTHER_ENC_CTX_BUF_SIZE_V6 (12 * SZ_1K) /* 12KB */ /* MFCv6 variant defines */ -#define MAX_FW_SIZE_V6 (SZ_1M) /* 1MB */ +#define MAX_FW_SIZE_V6 (SZ_512K) /* 512KB */ #define MAX_CPB_SIZE_V6 (3 * SZ_1M) /* 3MB */ #define MFC_VERSION_V6 0x61 #define MFC_NUM_PORTS_V6 1 diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v7.h b/drivers/media/platform/s5p-mfc/regs-mfc-v7.h index 1a5c6fdf7846..9f220769d970 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc-v7.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v7.h @@ -34,7 +34,7 @@ #define S5P_FIMV_E_VP8_NUM_T_LAYER_V7 0xfdc4 /* MFCv7 variant defines */ -#define MAX_FW_SIZE_V7 (SZ_1M) /* 1MB */ +#define MAX_FW_SIZE_V7 (SZ_512K) /* 512KB */ #define MAX_CPB_SIZE_V7 (3 * SZ_1M) /* 3MB */ #define MFC_VERSION_V7 0x72 #define MFC_NUM_PORTS_V7 1 diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v8.h b/drivers/media/platform/s5p-mfc/regs-mfc-v8.h index 4d1c3750eb5e..75f5f7511d72 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc-v8.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v8.h @@ -116,7 +116,7 @@ #define S5P_FIMV_D_ALIGN_PLANE_SIZE_V8 64 /* MFCv8 variant defines */ -#define MAX_FW_SIZE_V8 (SZ_1M) /* 1MB */ +#define MAX_FW_SIZE_V8 (SZ_512K) /* 512KB */ #define MAX_CPB_SIZE_V8 (3 * SZ_1M) /* 3MB */ #define MFC_VERSION_V8 0x80 #define MFC_NUM_PORTS_V8 1 diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index bb0a5887c9a9..1afde5021ca6 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -22,6 +22,7 @@ #include <media/v4l2-event.h> #include <linux/workqueue.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/of_reserved_mem.h> #include <media/videobuf2-v4l2.h> #include "s5p_mfc_common.h" @@ -42,6 +43,10 @@ int mfc_debug_level; module_param_named(debug, mfc_debug_level, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug level - higher value produces more verbose messages"); +static char *mfc_mem_size; +module_param_named(mem, mfc_mem_size, charp, 0644); +MODULE_PARM_DESC(mem, "Preallocated memory size for the firmware and context buffers"); + /* Helper functions for interrupt processing */ /* Remove from hw execution round robin */ @@ -206,6 +211,7 @@ static void s5p_mfc_watchdog_worker(struct work_struct *work) } s5p_mfc_clock_on(); ret = s5p_mfc_init_hw(dev); + s5p_mfc_clock_off(); if (ret) mfc_err("Failed to reinit FW\n"); } @@ -666,9 +672,9 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) break; } s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); - wake_up_ctx(ctx, reason, err); WARN_ON(test_and_clear_bit(0, &dev->hw_lock) == 0); s5p_mfc_clock_off(); + wake_up_ctx(ctx, reason, err); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); } else { s5p_mfc_handle_frame(ctx, reason, err); @@ -682,15 +688,11 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) case S5P_MFC_R2H_CMD_OPEN_INSTANCE_RET: ctx->inst_no = s5p_mfc_hw_call(dev->mfc_ops, get_inst_no, dev); ctx->state = MFCINST_GOT_INST; - clear_work_bit(ctx); - wake_up(&ctx->queue); goto irq_cleanup_hw; case S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET: - clear_work_bit(ctx); ctx->inst_no = MFC_NO_INSTANCE_SET; ctx->state = MFCINST_FREE; - wake_up(&ctx->queue); goto irq_cleanup_hw; case S5P_MFC_R2H_CMD_SYS_INIT_RET: @@ -700,9 +702,9 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) if (ctx) clear_work_bit(ctx); s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev); - wake_up_dev(dev, reason, err); clear_bit(0, &dev->hw_lock); clear_bit(0, &dev->enter_suspend); + wake_up_dev(dev, reason, err); break; case S5P_MFC_R2H_CMD_INIT_BUFFERS_RET: @@ -717,9 +719,7 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) break; case S5P_MFC_R2H_CMD_DPB_FLUSH_RET: - clear_work_bit(ctx); ctx->state = MFCINST_RUNNING; - wake_up(&ctx->queue); goto irq_cleanup_hw; default: @@ -738,6 +738,8 @@ irq_cleanup_hw: mfc_err("Failed to unlock hw\n"); s5p_mfc_clock_off(); + clear_work_bit(ctx); + wake_up(&ctx->queue); s5p_mfc_hw_call(dev->mfc_ops, try_run, dev); spin_unlock(&dev->irqlock); @@ -764,6 +766,7 @@ static int s5p_mfc_open(struct file *file) ret = -ENOMEM; goto err_alloc; } + init_waitqueue_head(&ctx->queue); v4l2_fh_init(&ctx->fh, vdev); file->private_data = &ctx->fh; v4l2_fh_add(&ctx->fh); @@ -866,7 +869,6 @@ static int s5p_mfc_open(struct file *file) /* Init videobuf2 queue for OUTPUT */ q = &ctx->vq_src; q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; - q->io_modes = VB2_MMAP; q->drv_priv = &ctx->fh; q->lock = &dev->mfc_mutex; if (vdev == dev->vfd_dec) { @@ -899,7 +901,6 @@ static int s5p_mfc_open(struct file *file) mfc_err("Failed to initialize videobuf2 queue(output)\n"); goto err_queue_init; } - init_waitqueue_head(&ctx->queue); mutex_unlock(&dev->mfc_mutex); mfc_debug_leave(); return ret; @@ -1106,58 +1107,158 @@ static struct device *s5p_mfc_alloc_memdev(struct device *dev, return NULL; } -static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev) +static int s5p_mfc_configure_2port_memory(struct s5p_mfc_dev *mfc_dev) { struct device *dev = &mfc_dev->plat_dev->dev; - - /* - * When IOMMU is available, we cannot use the default configuration, - * because of MFC firmware requirements: address space limited to - * 256M and non-zero default start address. - * This is still simplified, not optimal configuration, but for now - * IOMMU core doesn't allow to configure device's IOMMUs channel - * separately. - */ - if (exynos_is_iommu_available(dev)) { - int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE, - S5P_MFC_IOMMU_DMA_SIZE); - if (ret == 0) - mfc_dev->mem_dev_l = mfc_dev->mem_dev_r = dev; - return ret; - } + void *bank2_virt; + dma_addr_t bank2_dma_addr; + unsigned long align_size = 1 << MFC_BASE_ALIGN_ORDER; + int ret; /* * Create and initialize virtual devices for accessing * reserved memory regions. */ - mfc_dev->mem_dev_l = s5p_mfc_alloc_memdev(dev, "left", - MFC_BANK1_ALLOC_CTX); - if (!mfc_dev->mem_dev_l) + mfc_dev->mem_dev[BANK_L_CTX] = s5p_mfc_alloc_memdev(dev, "left", + BANK_L_CTX); + if (!mfc_dev->mem_dev[BANK_L_CTX]) return -ENODEV; - mfc_dev->mem_dev_r = s5p_mfc_alloc_memdev(dev, "right", - MFC_BANK2_ALLOC_CTX); - if (!mfc_dev->mem_dev_r) { - device_unregister(mfc_dev->mem_dev_l); + mfc_dev->mem_dev[BANK_R_CTX] = s5p_mfc_alloc_memdev(dev, "right", + BANK_R_CTX); + if (!mfc_dev->mem_dev[BANK_R_CTX]) { + device_unregister(mfc_dev->mem_dev[BANK_L_CTX]); return -ENODEV; } + /* Allocate memory for firmware and initialize both banks addresses */ + ret = s5p_mfc_alloc_firmware(mfc_dev); + if (ret) { + device_unregister(mfc_dev->mem_dev[BANK_R_CTX]); + device_unregister(mfc_dev->mem_dev[BANK_L_CTX]); + return ret; + } + + mfc_dev->dma_base[BANK_L_CTX] = mfc_dev->fw_buf.dma; + + bank2_virt = dma_alloc_coherent(mfc_dev->mem_dev[BANK_R_CTX], + align_size, &bank2_dma_addr, GFP_KERNEL); + if (!bank2_virt) { + mfc_err("Allocating bank2 base failed\n"); + s5p_mfc_release_firmware(mfc_dev); + device_unregister(mfc_dev->mem_dev[BANK_R_CTX]); + device_unregister(mfc_dev->mem_dev[BANK_L_CTX]); + return -ENOMEM; + } + + /* Valid buffers passed to MFC encoder with LAST_FRAME command + * should not have address of bank2 - MFC will treat it as a null frame. + * To avoid such situation we set bank2 address below the pool address. + */ + mfc_dev->dma_base[BANK_R_CTX] = bank2_dma_addr - align_size; + + dma_free_coherent(mfc_dev->mem_dev[BANK_R_CTX], align_size, bank2_virt, + bank2_dma_addr); + + vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK_L_CTX], + DMA_BIT_MASK(32)); + vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK_R_CTX], + DMA_BIT_MASK(32)); + return 0; } -static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev) +static void s5p_mfc_unconfigure_2port_memory(struct s5p_mfc_dev *mfc_dev) +{ + device_unregister(mfc_dev->mem_dev[BANK_L_CTX]); + device_unregister(mfc_dev->mem_dev[BANK_R_CTX]); + vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK_L_CTX]); + vb2_dma_contig_clear_max_seg_size(mfc_dev->mem_dev[BANK_R_CTX]); +} + +static int s5p_mfc_configure_common_memory(struct s5p_mfc_dev *mfc_dev) { struct device *dev = &mfc_dev->plat_dev->dev; + unsigned long mem_size = SZ_4M; + unsigned int bitmap_size; - if (exynos_is_iommu_available(dev)) { - exynos_unconfigure_iommu(dev); - return; + if (IS_ENABLED(CONFIG_DMA_CMA) || exynos_is_iommu_available(dev)) + mem_size = SZ_8M; + + if (mfc_mem_size) + mem_size = memparse(mfc_mem_size, NULL); + + bitmap_size = BITS_TO_LONGS(mem_size >> PAGE_SHIFT) * sizeof(long); + + mfc_dev->mem_bitmap = kzalloc(bitmap_size, GFP_KERNEL); + if (!mfc_dev->mem_bitmap) + return -ENOMEM; + + mfc_dev->mem_virt = dma_alloc_coherent(dev, mem_size, + &mfc_dev->mem_base, GFP_KERNEL); + if (!mfc_dev->mem_virt) { + kfree(mfc_dev->mem_bitmap); + dev_err(dev, "failed to preallocate %ld MiB for the firmware and context buffers\n", + (mem_size / SZ_1M)); + return -ENOMEM; } + mfc_dev->mem_size = mem_size; + mfc_dev->dma_base[BANK_L_CTX] = mfc_dev->mem_base; + mfc_dev->dma_base[BANK_R_CTX] = mfc_dev->mem_base; + + /* + * MFC hardware cannot handle 0 as a base address, so mark first 128K + * as used (to keep required base alignment) and adjust base address + */ + if (mfc_dev->mem_base == (dma_addr_t)0) { + unsigned int offset = 1 << MFC_BASE_ALIGN_ORDER; + + bitmap_set(mfc_dev->mem_bitmap, 0, offset >> PAGE_SHIFT); + mfc_dev->dma_base[BANK_L_CTX] += offset; + mfc_dev->dma_base[BANK_R_CTX] += offset; + } + + /* Firmware allocation cannot fail in this case */ + s5p_mfc_alloc_firmware(mfc_dev); - device_unregister(mfc_dev->mem_dev_l); - device_unregister(mfc_dev->mem_dev_r); + mfc_dev->mem_dev[BANK_L_CTX] = mfc_dev->mem_dev[BANK_R_CTX] = dev; + vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32)); + + dev_info(dev, "preallocated %ld MiB buffer for the firmware and context buffers\n", + (mem_size / SZ_1M)); + + return 0; +} + +static void s5p_mfc_unconfigure_common_memory(struct s5p_mfc_dev *mfc_dev) +{ + struct device *dev = &mfc_dev->plat_dev->dev; + + dma_free_coherent(dev, mfc_dev->mem_size, mfc_dev->mem_virt, + mfc_dev->mem_base); + kfree(mfc_dev->mem_bitmap); + vb2_dma_contig_clear_max_seg_size(dev); +} + +static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev) +{ + struct device *dev = &mfc_dev->plat_dev->dev; + + if (exynos_is_iommu_available(dev) || !IS_TWOPORT(mfc_dev)) + return s5p_mfc_configure_common_memory(mfc_dev); + else + return s5p_mfc_configure_2port_memory(mfc_dev); } -static void *mfc_get_drv_data(struct platform_device *pdev); +static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev) +{ + struct device *dev = &mfc_dev->plat_dev->dev; + + s5p_mfc_release_firmware(mfc_dev); + if (exynos_is_iommu_available(dev) || !IS_TWOPORT(mfc_dev)) + s5p_mfc_unconfigure_common_memory(mfc_dev); + else + s5p_mfc_unconfigure_2port_memory(mfc_dev); +} /* MFC probe function */ static int s5p_mfc_probe(struct platform_device *pdev) @@ -1182,7 +1283,7 @@ static int s5p_mfc_probe(struct platform_device *pdev) return -ENODEV; } - dev->variant = mfc_get_drv_data(pdev); + dev->variant = of_device_get_match_data(&pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->regs_base = devm_ioremap_resource(&pdev->dev, res); @@ -1214,19 +1315,18 @@ static int s5p_mfc_probe(struct platform_device *pdev) goto err_dma; } - vb2_dma_contig_set_max_seg_size(dev->mem_dev_l, DMA_BIT_MASK(32)); - vb2_dma_contig_set_max_seg_size(dev->mem_dev_r, DMA_BIT_MASK(32)); - mutex_init(&dev->mfc_mutex); - - ret = s5p_mfc_alloc_firmware(dev); - if (ret) - goto err_res; + init_waitqueue_head(&dev->queue); + dev->hw_lock = 0; + INIT_WORK(&dev->watchdog_work, s5p_mfc_watchdog_worker); + atomic_set(&dev->watchdog_cnt, 0); + init_timer(&dev->watchdog_timer); + dev->watchdog_timer.data = (unsigned long)dev; + dev->watchdog_timer.function = s5p_mfc_watchdog; ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); if (ret) goto err_v4l2_dev_reg; - init_waitqueue_head(&dev->queue); /* decoder */ vfd = video_device_alloc(); @@ -1263,13 +1363,6 @@ static int s5p_mfc_probe(struct platform_device *pdev) video_set_drvdata(vfd, dev); platform_set_drvdata(pdev, dev); - dev->hw_lock = 0; - INIT_WORK(&dev->watchdog_work, s5p_mfc_watchdog_worker); - atomic_set(&dev->watchdog_cnt, 0); - init_timer(&dev->watchdog_timer); - dev->watchdog_timer.data = (unsigned long)dev; - dev->watchdog_timer.function = s5p_mfc_watchdog; - /* Initialize HW ops and commands based on MFC version */ s5p_mfc_init_hw_ops(dev); s5p_mfc_init_hw_cmds(dev); @@ -1305,8 +1398,6 @@ err_enc_alloc: err_dec_alloc: v4l2_device_unregister(&dev->v4l2_dev); err_v4l2_dev_reg: - s5p_mfc_release_firmware(dev); -err_res: s5p_mfc_final_pm(dev); err_dma: s5p_mfc_unconfigure_dma_memory(dev); @@ -1348,10 +1439,7 @@ static int s5p_mfc_remove(struct platform_device *pdev) video_device_release(dev->vfd_enc); video_device_release(dev->vfd_dec); v4l2_device_unregister(&dev->v4l2_dev); - s5p_mfc_release_firmware(dev); s5p_mfc_unconfigure_dma_memory(dev); - vb2_dma_contig_clear_max_seg_size(dev->mem_dev_l); - vb2_dma_contig_clear_max_seg_size(dev->mem_dev_r); s5p_mfc_final_pm(dev); return 0; @@ -1423,16 +1511,11 @@ static struct s5p_mfc_buf_size buf_size_v5 = { .priv = &mfc_buf_size_v5, }; -static struct s5p_mfc_buf_align mfc_buf_align_v5 = { - .base = MFC_BASE_ALIGN_ORDER, -}; - static struct s5p_mfc_variant mfc_drvdata_v5 = { .version = MFC_VERSION, .version_bit = MFC_V5_BIT, .port_num = MFC_NUM_PORTS, .buf_size = &buf_size_v5, - .buf_align = &mfc_buf_align_v5, .fw_name[0] = "s5p-mfc.fw", .clk_names = {"mfc", "sclk_mfc"}, .num_clocks = 2, @@ -1453,16 +1536,11 @@ static struct s5p_mfc_buf_size buf_size_v6 = { .priv = &mfc_buf_size_v6, }; -static struct s5p_mfc_buf_align mfc_buf_align_v6 = { - .base = 0, -}; - static struct s5p_mfc_variant mfc_drvdata_v6 = { .version = MFC_VERSION_V6, .version_bit = MFC_V6_BIT, .port_num = MFC_NUM_PORTS_V6, .buf_size = &buf_size_v6, - .buf_align = &mfc_buf_align_v6, .fw_name[0] = "s5p-mfc-v6.fw", /* * v6-v2 firmware contains bug fixes and interface change @@ -1487,16 +1565,11 @@ static struct s5p_mfc_buf_size buf_size_v7 = { .priv = &mfc_buf_size_v7, }; -static struct s5p_mfc_buf_align mfc_buf_align_v7 = { - .base = 0, -}; - static struct s5p_mfc_variant mfc_drvdata_v7 = { .version = MFC_VERSION_V7, .version_bit = MFC_V7_BIT, .port_num = MFC_NUM_PORTS_V7, .buf_size = &buf_size_v7, - .buf_align = &mfc_buf_align_v7, .fw_name[0] = "s5p-mfc-v7.fw", .clk_names = {"mfc", "sclk_mfc"}, .num_clocks = 2, @@ -1516,16 +1589,11 @@ static struct s5p_mfc_buf_size buf_size_v8 = { .priv = &mfc_buf_size_v8, }; -static struct s5p_mfc_buf_align mfc_buf_align_v8 = { - .base = 0, -}; - static struct s5p_mfc_variant mfc_drvdata_v8 = { .version = MFC_VERSION_V8, .version_bit = MFC_V8_BIT, .port_num = MFC_NUM_PORTS_V8, .buf_size = &buf_size_v8, - .buf_align = &mfc_buf_align_v8, .fw_name[0] = "s5p-mfc-v8.fw", .clk_names = {"mfc"}, .num_clocks = 1, @@ -1536,7 +1604,6 @@ static struct s5p_mfc_variant mfc_drvdata_v8_5433 = { .version_bit = MFC_V8_BIT, .port_num = MFC_NUM_PORTS_V8, .buf_size = &buf_size_v8, - .buf_align = &mfc_buf_align_v8, .fw_name[0] = "s5p-mfc-v8.fw", .clk_names = {"pclk", "aclk", "aclk_xiu"}, .num_clocks = 3, @@ -1563,18 +1630,6 @@ static const struct of_device_id exynos_mfc_match[] = { }; MODULE_DEVICE_TABLE(of, exynos_mfc_match); -static void *mfc_get_drv_data(struct platform_device *pdev) -{ - struct s5p_mfc_variant *driver_data = NULL; - const struct of_device_id *match; - - match = of_match_node(exynos_mfc_match, pdev->dev.of_node); - if (match) - driver_data = (struct s5p_mfc_variant *)match->data; - - return driver_data; -} - static struct platform_driver s5p_mfc_driver = { .probe = s5p_mfc_probe, .remove = s5p_mfc_remove, diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c index 8c4739ca16d6..4c80bb4243be 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c @@ -47,7 +47,7 @@ static int s5p_mfc_sys_init_cmd_v5(struct s5p_mfc_dev *dev) struct s5p_mfc_cmd_args h2r_args; memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args)); - h2r_args.arg[0] = dev->fw_size; + h2r_args.arg[0] = dev->fw_buf.size; return s5p_mfc_cmd_host2risc_v5(dev, S5P_FIMV_H2R_CMD_SYS_INIT, &h2r_args); } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index ab23236aa942..4220914529b2 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -33,8 +33,9 @@ * while mmaping */ #define DST_QUEUE_OFF_BASE (1 << 30) -#define MFC_BANK1_ALLOC_CTX 0 -#define MFC_BANK2_ALLOC_CTX 1 +#define BANK_L_CTX 0 +#define BANK_R_CTX 1 +#define BANK_CTX_NUM 2 #define MFC_BANK1_ALIGN_ORDER 13 #define MFC_BANK2_ALIGN_ORDER 13 @@ -44,14 +45,6 @@ #include <media/videobuf2-dma-contig.h> -static inline dma_addr_t s5p_mfc_mem_cookie(void *a, void *b) -{ - /* Same functionality as the vb2_dma_contig_plane_paddr */ - dma_addr_t *paddr = vb2_dma_contig_memops.cookie(b); - - return *paddr; -} - /* MFC definitions */ #define MFC_MAX_EXTRA_DPB 5 #define MFC_MAX_BUFFERS 32 @@ -200,7 +193,7 @@ struct s5p_mfc_buf { */ struct s5p_mfc_pm { struct clk *clock_gate; - const char **clk_names; + const char * const *clk_names; struct clk *clocks[MFC_MAX_CLOCKS]; int num_clocks; bool use_clock_gating; @@ -229,16 +222,11 @@ struct s5p_mfc_buf_size { void *priv; }; -struct s5p_mfc_buf_align { - unsigned int base; -}; - struct s5p_mfc_variant { unsigned int version; unsigned int port_num; u32 version_bit; struct s5p_mfc_buf_size *buf_size; - struct s5p_mfc_buf_align *buf_align; char *fw_name[MFC_FW_MAX_VERSIONS]; const char *clk_names[MFC_MAX_CLOCKS]; int num_clocks; @@ -252,12 +240,14 @@ struct s5p_mfc_variant { * buffer accessed by driver * @dma: DMA address, only valid when kernel DMA API used * @size: size of the buffer + * @ctx: memory context (bank) used for this allocation */ struct s5p_mfc_priv_buf { unsigned long ofs; void *virt; dma_addr_t dma; size_t size; + unsigned int ctx; }; /** @@ -267,8 +257,7 @@ struct s5p_mfc_priv_buf { * @vfd_dec: video device for decoding * @vfd_enc: video device for encoding * @plat_dev: platform device - * @mem_dev_l: child device of the left memory bank (0) - * @mem_dev_r: child device of the right memory bank (1) + * @mem_dev[]: child devices of the memory banks * @regs_base: base address of the MFC hw registers * @irq: irq resource * @dec_ctrl_handler: control framework handler for decoding @@ -286,8 +275,7 @@ struct s5p_mfc_priv_buf { * @queue: waitqueue for waiting for completion of device commands * @fw_size: size of firmware * @fw_virt_addr: virtual firmware address - * @bank1: address of the beginning of bank 1 memory - * @bank2: address of the beginning of bank 2 memory + * @dma_base[]: address of the beginning of memory banks * @hw_lock: used for hardware locking * @ctx: array of driver contexts * @curr_ctx: number of the currently running context @@ -310,14 +298,13 @@ struct s5p_mfc_dev { struct video_device *vfd_dec; struct video_device *vfd_enc; struct platform_device *plat_dev; - struct device *mem_dev_l; - struct device *mem_dev_r; + struct device *mem_dev[BANK_CTX_NUM]; void __iomem *regs_base; int irq; struct v4l2_ctrl_handler dec_ctrl_handler; struct v4l2_ctrl_handler enc_ctrl_handler; struct s5p_mfc_pm pm; - struct s5p_mfc_variant *variant; + const struct s5p_mfc_variant *variant; int num_inst; spinlock_t irqlock; /* lock when operating on context */ spinlock_t condlock; /* lock when changing/checking if a context is @@ -327,10 +314,12 @@ struct s5p_mfc_dev { int int_type; unsigned int int_err; wait_queue_head_t queue; - size_t fw_size; - void *fw_virt_addr; - dma_addr_t bank1; - dma_addr_t bank2; + struct s5p_mfc_priv_buf fw_buf; + size_t mem_size; + dma_addr_t mem_base; + unsigned long *mem_bitmap; + void *mem_virt; + dma_addr_t dma_base[BANK_CTX_NUM]; unsigned long hw_lock; struct s5p_mfc_ctx *ctx[MFC_NUM_CONTEXTS]; int curr_ctx; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c index cc888713b3b6..69ef9c23a99a 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c @@ -26,51 +26,22 @@ /* Allocate memory for firmware */ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) { - void *bank2_virt; - dma_addr_t bank2_dma_addr; + struct s5p_mfc_priv_buf *fw_buf = &dev->fw_buf; + int err; - dev->fw_size = dev->variant->buf_size->fw; + fw_buf->size = dev->variant->buf_size->fw; - if (dev->fw_virt_addr) { + if (fw_buf->virt) { mfc_err("Attempting to allocate firmware when it seems that it is already loaded\n"); return -ENOMEM; } - dev->fw_virt_addr = dma_alloc_coherent(dev->mem_dev_l, dev->fw_size, - &dev->bank1, GFP_KERNEL); - - if (!dev->fw_virt_addr) { + err = s5p_mfc_alloc_priv_buf(dev, BANK_L_CTX, &dev->fw_buf); + if (err) { mfc_err("Allocating bitprocessor buffer failed\n"); - return -ENOMEM; + return err; } - if (HAS_PORTNUM(dev) && IS_TWOPORT(dev)) { - bank2_virt = dma_alloc_coherent(dev->mem_dev_r, 1 << MFC_BASE_ALIGN_ORDER, - &bank2_dma_addr, GFP_KERNEL); - - if (!bank2_virt) { - mfc_err("Allocating bank2 base failed\n"); - dma_free_coherent(dev->mem_dev_l, dev->fw_size, - dev->fw_virt_addr, dev->bank1); - dev->fw_virt_addr = NULL; - return -ENOMEM; - } - - /* Valid buffers passed to MFC encoder with LAST_FRAME command - * should not have address of bank2 - MFC will treat it as a null frame. - * To avoid such situation we set bank2 address below the pool address. - */ - dev->bank2 = bank2_dma_addr - (1 << MFC_BASE_ALIGN_ORDER); - - dma_free_coherent(dev->mem_dev_r, 1 << MFC_BASE_ALIGN_ORDER, - bank2_virt, bank2_dma_addr); - - } else { - /* In this case bank2 can point to the same address as bank1. - * Firmware will always occupy the beginning of this area so it is - * impossible having a video frame buffer with zero address. */ - dev->bank2 = dev->bank1; - } return 0; } @@ -99,17 +70,17 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev) mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n"); return -EINVAL; } - if (fw_blob->size > dev->fw_size) { + if (fw_blob->size > dev->fw_buf.size) { mfc_err("MFC firmware is too big to be loaded\n"); release_firmware(fw_blob); return -ENOMEM; } - if (!dev->fw_virt_addr) { + if (!dev->fw_buf.virt) { mfc_err("MFC firmware is not allocated\n"); release_firmware(fw_blob); return -EINVAL; } - memcpy(dev->fw_virt_addr, fw_blob->data, fw_blob->size); + memcpy(dev->fw_buf.virt, fw_blob->data, fw_blob->size); wmb(); release_firmware(fw_blob); mfc_debug_leave(); @@ -121,11 +92,7 @@ int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev) { /* Before calling this function one has to make sure * that MFC is no longer processing */ - if (!dev->fw_virt_addr) - return -EINVAL; - dma_free_coherent(dev->mem_dev_l, dev->fw_size, dev->fw_virt_addr, - dev->bank1); - dev->fw_virt_addr = NULL; + s5p_mfc_release_priv_buf(dev, &dev->fw_buf); return 0; } @@ -210,13 +177,18 @@ int s5p_mfc_reset(struct s5p_mfc_dev *dev) static inline void s5p_mfc_init_memctrl(struct s5p_mfc_dev *dev) { if (IS_MFCV6_PLUS(dev)) { - mfc_write(dev, dev->bank1, S5P_FIMV_RISC_BASE_ADDRESS_V6); - mfc_debug(2, "Base Address : %pad\n", &dev->bank1); + mfc_write(dev, dev->dma_base[BANK_L_CTX], + S5P_FIMV_RISC_BASE_ADDRESS_V6); + mfc_debug(2, "Base Address : %pad\n", + &dev->dma_base[BANK_L_CTX]); } else { - mfc_write(dev, dev->bank1, S5P_FIMV_MC_DRAMBASE_ADR_A); - mfc_write(dev, dev->bank2, S5P_FIMV_MC_DRAMBASE_ADR_B); + mfc_write(dev, dev->dma_base[BANK_L_CTX], + S5P_FIMV_MC_DRAMBASE_ADR_A); + mfc_write(dev, dev->dma_base[BANK_R_CTX], + S5P_FIMV_MC_DRAMBASE_ADR_B); mfc_debug(2, "Bank1: %pad, Bank2: %pad\n", - &dev->bank1, &dev->bank2); + &dev->dma_base[BANK_L_CTX], + &dev->dma_base[BANK_R_CTX]); } } @@ -240,7 +212,7 @@ int s5p_mfc_init_hw(struct s5p_mfc_dev *dev) int ret; mfc_debug_enter(); - if (!dev->fw_virt_addr) { + if (!dev->fw_buf.virt) { mfc_err("Firmware memory is not allocated.\n"); return -EINVAL; } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h index 8e5df041edf7..45c807bf19cc 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.h @@ -18,7 +18,6 @@ int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev); int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev); int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev); -int s5p_mfc_reload_firmware(struct s5p_mfc_dev *dev); int s5p_mfc_init_hw(struct s5p_mfc_dev *dev); void s5p_mfc_deinit_hw(struct s5p_mfc_dev *dev); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c index 367ef8e8dbf0..8937b0af7cb3 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c @@ -931,14 +931,14 @@ static int s5p_mfc_queue_setup(struct vb2_queue *vq, psize[1] = ctx->chroma_size; if (IS_MFCV6_PLUS(dev)) - alloc_devs[0] = ctx->dev->mem_dev_l; + alloc_devs[0] = ctx->dev->mem_dev[BANK_L_CTX]; else - alloc_devs[0] = ctx->dev->mem_dev_r; - alloc_devs[1] = ctx->dev->mem_dev_l; + alloc_devs[0] = ctx->dev->mem_dev[BANK_R_CTX]; + alloc_devs[1] = ctx->dev->mem_dev[BANK_L_CTX]; } else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE && ctx->state == MFCINST_INIT) { psize[0] = ctx->dec_src_buf_size; - alloc_devs[0] = ctx->dev->mem_dev_l; + alloc_devs[0] = ctx->dev->mem_dev[BANK_L_CTX]; } else { mfc_err("This video node is dedicated to decoding. Decoding not initialized\n"); return -EINVAL; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c index e39d9e06e299..2a5fd7c42cd5 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c @@ -1832,7 +1832,7 @@ static int s5p_mfc_queue_setup(struct vb2_queue *vq, if (*buf_count > MFC_MAX_BUFFERS) *buf_count = MFC_MAX_BUFFERS; psize[0] = ctx->enc_dst_buf_size; - alloc_devs[0] = ctx->dev->mem_dev_l; + alloc_devs[0] = ctx->dev->mem_dev[BANK_L_CTX]; } else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { if (ctx->src_fmt) *plane_count = ctx->src_fmt->num_planes; @@ -1848,11 +1848,11 @@ static int s5p_mfc_queue_setup(struct vb2_queue *vq, psize[1] = ctx->chroma_size; if (IS_MFCV6_PLUS(dev)) { - alloc_devs[0] = ctx->dev->mem_dev_l; - alloc_devs[1] = ctx->dev->mem_dev_l; + alloc_devs[0] = ctx->dev->mem_dev[BANK_L_CTX]; + alloc_devs[1] = ctx->dev->mem_dev[BANK_L_CTX]; } else { - alloc_devs[0] = ctx->dev->mem_dev_r; - alloc_devs[1] = ctx->dev->mem_dev_r; + alloc_devs[0] = ctx->dev->mem_dev[BANK_R_CTX]; + alloc_devs[1] = ctx->dev->mem_dev[BANK_R_CTX]; } } else { mfc_err("invalid queue type: %d\n", vq->type); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h b/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h index 6962132ae8fa..76667924ee2a 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h @@ -11,54 +11,13 @@ #ifndef S5P_MFC_IOMMU_H_ #define S5P_MFC_IOMMU_H_ -#define S5P_MFC_IOMMU_DMA_BASE 0x20000000lu -#define S5P_MFC_IOMMU_DMA_SIZE SZ_256M - -#if defined(CONFIG_EXYNOS_IOMMU) && defined(CONFIG_ARM_DMA_USE_IOMMU) - -#include <asm/dma-iommu.h> +#if defined(CONFIG_EXYNOS_IOMMU) static inline bool exynos_is_iommu_available(struct device *dev) { return dev->archdata.iommu != NULL; } -static inline void exynos_unconfigure_iommu(struct device *dev) -{ - struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); - - arm_iommu_detach_device(dev); - arm_iommu_release_mapping(mapping); -} - -static inline int exynos_configure_iommu(struct device *dev, - unsigned int base, unsigned int size) -{ - struct dma_iommu_mapping *mapping = NULL; - int ret; - - /* Disable the default mapping created by device core */ - if (to_dma_iommu_mapping(dev)) - exynos_unconfigure_iommu(dev); - - mapping = arm_iommu_create_mapping(dev->bus, base, size); - if (IS_ERR(mapping)) { - pr_warn("Failed to create IOMMU mapping for device %s\n", - dev_name(dev)); - return PTR_ERR(mapping); - } - - ret = arm_iommu_attach_device(dev, mapping); - if (ret) { - pr_warn("Failed to attached device %s to IOMMU_mapping\n", - dev_name(dev)); - arm_iommu_release_mapping(mapping); - return ret; - } - - return 0; -} - #else static inline bool exynos_is_iommu_available(struct device *dev) @@ -66,14 +25,6 @@ static inline bool exynos_is_iommu_available(struct device *dev) return false; } -static inline int exynos_configure_iommu(struct device *dev, - unsigned int base, unsigned int size) -{ - return -ENOSYS; -} - -static inline void exynos_unconfigure_iommu(struct device *dev) { } - #endif #endif /* S5P_MFC_IOMMU_H_ */ diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c index 99f65a92a6be..7f33cf23947f 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c @@ -37,38 +37,91 @@ void s5p_mfc_init_regs(struct s5p_mfc_dev *dev) dev->mfc_regs = s5p_mfc_init_regs_v6_plus(dev); } -int s5p_mfc_alloc_priv_buf(struct device *dev, dma_addr_t base, - struct s5p_mfc_priv_buf *b) +int s5p_mfc_alloc_priv_buf(struct s5p_mfc_dev *dev, unsigned int mem_ctx, + struct s5p_mfc_priv_buf *b) { + unsigned int bits = dev->mem_size >> PAGE_SHIFT; + unsigned int count = b->size >> PAGE_SHIFT; + unsigned int align = (SZ_64K >> PAGE_SHIFT) - 1; + unsigned int start, offset; + mfc_debug(3, "Allocating priv: %zu\n", b->size); - b->virt = dma_alloc_coherent(dev, b->size, &b->dma, GFP_KERNEL); + if (dev->mem_virt) { + start = bitmap_find_next_zero_area(dev->mem_bitmap, bits, 0, count, align); + if (start > bits) + goto no_mem; - if (!b->virt) { - mfc_err("Allocating private buffer of size %zu failed\n", - b->size); - return -ENOMEM; - } + bitmap_set(dev->mem_bitmap, start, count); + offset = start << PAGE_SHIFT; + b->virt = dev->mem_virt + offset; + b->dma = dev->mem_base + offset; + } else { + struct device *mem_dev = dev->mem_dev[mem_ctx]; + dma_addr_t base = dev->dma_base[mem_ctx]; - if (b->dma < base) { - mfc_err("Invalid memory configuration - buffer (%pad) is below base memory address(%pad)\n", - &b->dma, &base); - dma_free_coherent(dev, b->size, b->virt, b->dma); - return -ENOMEM; + b->ctx = mem_ctx; + b->virt = dma_alloc_coherent(mem_dev, b->size, &b->dma, GFP_KERNEL); + if (!b->virt) + goto no_mem; + if (b->dma < base) { + mfc_err("Invalid memory configuration - buffer (%pad) is below base memory address(%pad)\n", + &b->dma, &base); + dma_free_coherent(mem_dev, b->size, b->virt, b->dma); + return -ENOMEM; + } } mfc_debug(3, "Allocated addr %p %pad\n", b->virt, &b->dma); return 0; +no_mem: + mfc_err("Allocating private buffer of size %zu failed\n", b->size); + return -ENOMEM; +} + +int s5p_mfc_alloc_generic_buf(struct s5p_mfc_dev *dev, unsigned int mem_ctx, + struct s5p_mfc_priv_buf *b) +{ + struct device *mem_dev = dev->mem_dev[mem_ctx]; + + mfc_debug(3, "Allocating generic buf: %zu\n", b->size); + + b->ctx = mem_ctx; + b->virt = dma_alloc_coherent(mem_dev, b->size, &b->dma, GFP_KERNEL); + if (!b->virt) + goto no_mem; + + mfc_debug(3, "Allocated addr %p %pad\n", b->virt, &b->dma); + return 0; +no_mem: + mfc_err("Allocating generic buffer of size %zu failed\n", b->size); + return -ENOMEM; } -void s5p_mfc_release_priv_buf(struct device *dev, - struct s5p_mfc_priv_buf *b) +void s5p_mfc_release_priv_buf(struct s5p_mfc_dev *dev, + struct s5p_mfc_priv_buf *b) { - if (b->virt) { - dma_free_coherent(dev, b->size, b->virt, b->dma); - b->virt = NULL; - b->dma = 0; - b->size = 0; + if (dev->mem_virt) { + unsigned int start = (b->dma - dev->mem_base) >> PAGE_SHIFT; + unsigned int count = b->size >> PAGE_SHIFT; + + bitmap_clear(dev->mem_bitmap, start, count); + } else { + struct device *mem_dev = dev->mem_dev[b->ctx]; + + dma_free_coherent(mem_dev, b->size, b->virt, b->dma); } + b->virt = NULL; + b->dma = 0; + b->size = 0; } +void s5p_mfc_release_generic_buf(struct s5p_mfc_dev *dev, + struct s5p_mfc_priv_buf *b) +{ + struct device *mem_dev = dev->mem_dev[b->ctx]; + dma_free_coherent(mem_dev, b->size, b->virt, b->dma); + b->virt = NULL; + b->dma = 0; + b->size = 0; +} diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h index b6ac417ab63e..16d553fcff08 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h @@ -315,10 +315,14 @@ struct s5p_mfc_hw_ops { void s5p_mfc_init_hw_ops(struct s5p_mfc_dev *dev); void s5p_mfc_init_regs(struct s5p_mfc_dev *dev); -int s5p_mfc_alloc_priv_buf(struct device *dev, dma_addr_t base, - struct s5p_mfc_priv_buf *b); -void s5p_mfc_release_priv_buf(struct device *dev, - struct s5p_mfc_priv_buf *b); +int s5p_mfc_alloc_priv_buf(struct s5p_mfc_dev *dev, unsigned int mem_ctx, + struct s5p_mfc_priv_buf *b); +void s5p_mfc_release_priv_buf(struct s5p_mfc_dev *dev, + struct s5p_mfc_priv_buf *b); +int s5p_mfc_alloc_generic_buf(struct s5p_mfc_dev *dev, unsigned int mem_ctx, + struct s5p_mfc_priv_buf *b); +void s5p_mfc_release_generic_buf(struct s5p_mfc_dev *dev, + struct s5p_mfc_priv_buf *b); #endif /* S5P_MFC_OPR_H_ */ diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c index f4301d5bbd32..b41ee608c171 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c @@ -30,8 +30,8 @@ #include <linux/mm.h> #include <linux/sched.h> -#define OFFSETA(x) (((x) - dev->bank1) >> MFC_OFFSET_SHIFT) -#define OFFSETB(x) (((x) - dev->bank2) >> MFC_OFFSET_SHIFT) +#define OFFSETA(x) (((x) - dev->dma_base[BANK_L_CTX]) >> MFC_OFFSET_SHIFT) +#define OFFSETB(x) (((x) - dev->dma_base[BANK_R_CTX]) >> MFC_OFFSET_SHIFT) /* Allocate temporary buffers for decoding */ static int s5p_mfc_alloc_dec_temp_buffers_v5(struct s5p_mfc_ctx *ctx) @@ -41,7 +41,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v5(struct s5p_mfc_ctx *ctx) int ret; ctx->dsc.size = buf_size->dsc; - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev_l, dev->bank1, &ctx->dsc); + ret = s5p_mfc_alloc_priv_buf(dev, BANK_L_CTX, &ctx->dsc); if (ret) { mfc_err("Failed to allocate temporary buffer\n"); return ret; @@ -57,7 +57,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v5(struct s5p_mfc_ctx *ctx) /* Release temporary buffers for decoding */ static void s5p_mfc_release_dec_desc_buffer_v5(struct s5p_mfc_ctx *ctx) { - s5p_mfc_release_priv_buf(ctx->dev->mem_dev_l, &ctx->dsc); + s5p_mfc_release_priv_buf(ctx->dev, &ctx->dsc); } /* Allocate codec buffers */ @@ -172,8 +172,7 @@ static int s5p_mfc_alloc_codec_buffers_v5(struct s5p_mfc_ctx *ctx) /* Allocate only if memory from bank 1 is necessary */ if (ctx->bank1.size > 0) { - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev_l, dev->bank1, - &ctx->bank1); + ret = s5p_mfc_alloc_priv_buf(dev, BANK_L_CTX, &ctx->bank1); if (ret) { mfc_err("Failed to allocate Bank1 temporary buffer\n"); return ret; @@ -182,11 +181,10 @@ static int s5p_mfc_alloc_codec_buffers_v5(struct s5p_mfc_ctx *ctx) } /* Allocate only if memory from bank 2 is necessary */ if (ctx->bank2.size > 0) { - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev_r, dev->bank2, - &ctx->bank2); + ret = s5p_mfc_alloc_priv_buf(dev, BANK_R_CTX, &ctx->bank2); if (ret) { mfc_err("Failed to allocate Bank2 temporary buffer\n"); - s5p_mfc_release_priv_buf(ctx->dev->mem_dev_l, &ctx->bank1); + s5p_mfc_release_priv_buf(ctx->dev, &ctx->bank1); return ret; } BUG_ON(ctx->bank2.dma & ((1 << MFC_BANK2_ALIGN_ORDER) - 1)); @@ -197,8 +195,8 @@ static int s5p_mfc_alloc_codec_buffers_v5(struct s5p_mfc_ctx *ctx) /* Release buffers allocated for codec */ static void s5p_mfc_release_codec_buffers_v5(struct s5p_mfc_ctx *ctx) { - s5p_mfc_release_priv_buf(ctx->dev->mem_dev_l, &ctx->bank1); - s5p_mfc_release_priv_buf(ctx->dev->mem_dev_r, &ctx->bank2); + s5p_mfc_release_priv_buf(ctx->dev, &ctx->bank1); + s5p_mfc_release_priv_buf(ctx->dev, &ctx->bank2); } /* Allocate memory for instance data buffer */ @@ -214,7 +212,7 @@ static int s5p_mfc_alloc_instance_buffer_v5(struct s5p_mfc_ctx *ctx) else ctx->ctx.size = buf_size->non_h264_ctx; - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev_l, dev->bank1, &ctx->ctx); + ret = s5p_mfc_alloc_priv_buf(dev, BANK_L_CTX, &ctx->ctx); if (ret) { mfc_err("Failed to allocate instance buffer\n"); return ret; @@ -227,15 +225,15 @@ static int s5p_mfc_alloc_instance_buffer_v5(struct s5p_mfc_ctx *ctx) /* Initialize shared memory */ ctx->shm.size = buf_size->shm; - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev_l, dev->bank1, &ctx->shm); + ret = s5p_mfc_alloc_priv_buf(dev, BANK_L_CTX, &ctx->shm); if (ret) { mfc_err("Failed to allocate shared memory buffer\n"); - s5p_mfc_release_priv_buf(dev->mem_dev_l, &ctx->ctx); + s5p_mfc_release_priv_buf(dev, &ctx->ctx); return ret; } /* shared memory offset only keeps the offset from base (port a) */ - ctx->shm.ofs = ctx->shm.dma - dev->bank1; + ctx->shm.ofs = ctx->shm.dma - dev->dma_base[BANK_L_CTX]; BUG_ON(ctx->shm.ofs & ((1 << MFC_BANK1_ALIGN_ORDER) - 1)); memset(ctx->shm.virt, 0, buf_size->shm); @@ -246,8 +244,8 @@ static int s5p_mfc_alloc_instance_buffer_v5(struct s5p_mfc_ctx *ctx) /* Release instance buffer */ static void s5p_mfc_release_instance_buffer_v5(struct s5p_mfc_ctx *ctx) { - s5p_mfc_release_priv_buf(ctx->dev->mem_dev_l, &ctx->ctx); - s5p_mfc_release_priv_buf(ctx->dev->mem_dev_l, &ctx->shm); + s5p_mfc_release_priv_buf(ctx->dev, &ctx->ctx); + s5p_mfc_release_priv_buf(ctx->dev, &ctx->shm); } static int s5p_mfc_alloc_dev_context_buffer_v5(struct s5p_mfc_dev *dev) @@ -534,10 +532,10 @@ static void s5p_mfc_get_enc_frame_buffer_v5(struct s5p_mfc_ctx *ctx, { struct s5p_mfc_dev *dev = ctx->dev; - *y_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_Y_ADDR) - << MFC_OFFSET_SHIFT); - *c_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_C_ADDR) - << MFC_OFFSET_SHIFT); + *y_addr = dev->dma_base[BANK_R_CTX] + + (mfc_read(dev, S5P_FIMV_ENCODED_Y_ADDR) << MFC_OFFSET_SHIFT); + *c_addr = dev->dma_base[BANK_R_CTX] + + (mfc_read(dev, S5P_FIMV_ENCODED_C_ADDR) << MFC_OFFSET_SHIFT); } /* Set encoding ref & codec buffer */ @@ -1214,7 +1212,8 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) } if (list_empty(&ctx->src_queue)) { /* send null frame */ - s5p_mfc_set_enc_frame_buffer_v5(ctx, dev->bank2, dev->bank2); + s5p_mfc_set_enc_frame_buffer_v5(ctx, dev->dma_base[BANK_R_CTX], + dev->dma_base[BANK_R_CTX]); src_mb = NULL; } else { src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, @@ -1222,8 +1221,9 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) src_mb->flags |= MFC_BUF_FLAG_USED; if (src_mb->b->vb2_buf.planes[0].bytesused == 0) { /* send null frame */ - s5p_mfc_set_enc_frame_buffer_v5(ctx, dev->bank2, - dev->bank2); + s5p_mfc_set_enc_frame_buffer_v5(ctx, + dev->dma_base[BANK_R_CTX], + dev->dma_base[BANK_R_CTX]); ctx->state = MFCINST_FINISHING; } else { src_y_addr = vb2_dma_contig_plane_dma_addr( diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index d6f207e859ab..85880e9106be 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -239,8 +239,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) /* Allocate only if memory from bank 1 is necessary */ if (ctx->bank1.size > 0) { - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev_l, dev->bank1, - &ctx->bank1); + ret = s5p_mfc_alloc_generic_buf(dev, BANK_L_CTX, &ctx->bank1); if (ret) { mfc_err("Failed to allocate Bank1 memory\n"); return ret; @@ -253,7 +252,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) /* Release buffers allocated for codec */ static void s5p_mfc_release_codec_buffers_v6(struct s5p_mfc_ctx *ctx) { - s5p_mfc_release_priv_buf(ctx->dev->mem_dev_l, &ctx->bank1); + s5p_mfc_release_generic_buf(ctx->dev, &ctx->bank1); } /* Allocate memory for instance data buffer */ @@ -292,7 +291,7 @@ static int s5p_mfc_alloc_instance_buffer_v6(struct s5p_mfc_ctx *ctx) break; } - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev_l, dev->bank1, &ctx->ctx); + ret = s5p_mfc_alloc_priv_buf(dev, BANK_L_CTX, &ctx->ctx); if (ret) { mfc_err("Failed to allocate instance buffer\n"); return ret; @@ -309,7 +308,7 @@ static int s5p_mfc_alloc_instance_buffer_v6(struct s5p_mfc_ctx *ctx) /* Release instance buffer */ static void s5p_mfc_release_instance_buffer_v6(struct s5p_mfc_ctx *ctx) { - s5p_mfc_release_priv_buf(ctx->dev->mem_dev_l, &ctx->ctx); + s5p_mfc_release_priv_buf(ctx->dev, &ctx->ctx); } /* Allocate context buffers for SYS_INIT */ @@ -321,8 +320,7 @@ static int s5p_mfc_alloc_dev_context_buffer_v6(struct s5p_mfc_dev *dev) mfc_debug_enter(); dev->ctx_buf.size = buf_size->dev_ctx; - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev_l, dev->bank1, - &dev->ctx_buf); + ret = s5p_mfc_alloc_priv_buf(dev, BANK_L_CTX, &dev->ctx_buf); if (ret) { mfc_err("Failed to allocate device context buffer\n"); return ret; @@ -339,7 +337,7 @@ static int s5p_mfc_alloc_dev_context_buffer_v6(struct s5p_mfc_dev *dev) /* Release context buffers for SYS_INIT */ static void s5p_mfc_release_dev_context_buffer_v6(struct s5p_mfc_dev *dev) { - s5p_mfc_release_priv_buf(dev->mem_dev_l, &dev->ctx_buf); + s5p_mfc_release_priv_buf(dev, &dev->ctx_buf); } static int calc_plane(int width, int height) @@ -497,7 +495,7 @@ static int s5p_mfc_set_dec_frame_buffer_v6(struct s5p_mfc_ctx *ctx) } } - mfc_debug(2, "Buf1: %zu, buf_size1: %d (frames %d)\n", + mfc_debug(2, "Buf1: %zx, buf_size1: %d (frames %d)\n", buf_addr1, buf_size1, ctx->total_dpb_count); if (buf_size1 < 0) { mfc_debug(2, "Not enough memory has been allocated.\n"); diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c index ef2a519bcd4c..992d61a8b961 100644 --- a/drivers/media/platform/sh_vou.c +++ b/drivers/media/platform/sh_vou.c @@ -813,8 +813,8 @@ static u32 sh_vou_ntsc_mode(enum sh_vou_bus_fmt bus_fmt) { switch (bus_fmt) { default: - pr_warning("%s(): Invalid bus-format code %d, using default 8-bit\n", - __func__, bus_fmt); + pr_warn("%s(): Invalid bus-format code %d, using default 8-bit\n", + __func__, bus_fmt); case SH_VOU_BUS_8BIT: return 1; case SH_VOU_BUS_16BIT: diff --git a/drivers/media/platform/soc_camera/Kconfig b/drivers/media/platform/soc_camera/Kconfig index 86d74788544f..f5979c12ad61 100644 --- a/drivers/media/platform/soc_camera/Kconfig +++ b/drivers/media/platform/soc_camera/Kconfig @@ -1,7 +1,6 @@ config SOC_CAMERA tristate "SoC camera support" depends on VIDEO_V4L2 && HAS_DMA && I2C - select VIDEOBUF_GEN select VIDEOBUF2_CORE help SoC Camera is a common API to several cameras, not connecting @@ -26,14 +25,3 @@ config VIDEO_SH_MOBILE_CEU select SOC_CAMERA_SCALE_CROP ---help--- This is a v4l2 driver for the SuperH Mobile CEU Interface - -config VIDEO_ATMEL_ISI - tristate "ATMEL Image Sensor Interface (ISI) support" - depends on VIDEO_DEV && SOC_CAMERA - depends on ARCH_AT91 || COMPILE_TEST - depends on HAS_DMA - select VIDEOBUF2_DMA_CONTIG - ---help--- - This module makes the ATMEL Image Sensor Interface available - as a v4l2 device. - diff --git a/drivers/media/platform/soc_camera/Makefile b/drivers/media/platform/soc_camera/Makefile index 7633a0f2f66f..07a451e8b228 100644 --- a/drivers/media/platform/soc_camera/Makefile +++ b/drivers/media/platform/soc_camera/Makefile @@ -6,5 +6,4 @@ obj-$(CONFIG_SOC_CAMERA_SCALE_CROP) += soc_scale_crop.o obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o # soc-camera host drivers have to be linked after camera drivers -obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c deleted file mode 100644 index 46de657c3e6d..000000000000 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ /dev/null @@ -1,1167 +0,0 @@ -/* - * Copyright (c) 2011 Atmel Corporation - * Josh Wu, <josh.wu@atmel.com> - * - * Based on previous work by Lars Haring, <lars.haring@atmel.com> - * and Sedji Gaouaou - * Based on the bttv driver for Bt848 with respective copyright holders - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/clk.h> -#include <linux/completion.h> -#include <linux/delay.h> -#include <linux/fs.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/pm_runtime.h> -#include <linux/slab.h> - -#include <media/soc_camera.h> -#include <media/drv-intf/soc_mediabus.h> -#include <media/v4l2-of.h> -#include <media/videobuf2-dma-contig.h> - -#include "atmel-isi.h" - -#define MAX_BUFFER_NUM 32 -#define MAX_SUPPORT_WIDTH 2048 -#define MAX_SUPPORT_HEIGHT 2048 -#define VID_LIMIT_BYTES (16 * 1024 * 1024) -#define MIN_FRAME_RATE 15 -#define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE) - -/* Frame buffer descriptor */ -struct fbd { - /* Physical address of the frame buffer */ - u32 fb_address; - /* DMA Control Register(only in HISI2) */ - u32 dma_ctrl; - /* Physical address of the next fbd */ - u32 next_fbd_address; -}; - -static void set_dma_ctrl(struct fbd *fb_desc, u32 ctrl) -{ - fb_desc->dma_ctrl = ctrl; -} - -struct isi_dma_desc { - struct list_head list; - struct fbd *p_fbd; - dma_addr_t fbd_phys; -}; - -/* Frame buffer data */ -struct frame_buffer { - struct vb2_v4l2_buffer vb; - struct isi_dma_desc *p_dma_desc; - struct list_head list; -}; - -struct atmel_isi { - /* Protects the access of variables shared with the ISR */ - spinlock_t lock; - void __iomem *regs; - - int sequence; - - /* Allocate descriptors for dma buffer use */ - struct fbd *p_fb_descriptors; - dma_addr_t fb_descriptors_phys; - struct list_head dma_desc_head; - struct isi_dma_desc dma_desc[MAX_BUFFER_NUM]; - bool enable_preview_path; - - struct completion complete; - /* ISI peripherial clock */ - struct clk *pclk; - unsigned int irq; - - struct isi_platform_data pdata; - u16 width_flags; /* max 12 bits */ - - struct list_head video_buffer_list; - struct frame_buffer *active; - - struct soc_camera_host soc_host; -}; - -static void isi_writel(struct atmel_isi *isi, u32 reg, u32 val) -{ - writel(val, isi->regs + reg); -} -static u32 isi_readl(struct atmel_isi *isi, u32 reg) -{ - return readl(isi->regs + reg); -} - -static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi, - const struct soc_camera_format_xlate *xlate) -{ - if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_YUYV) { - /* all convert to YUYV */ - switch (xlate->code) { - case MEDIA_BUS_FMT_VYUY8_2X8: - return ISI_CFG2_YCC_SWAP_MODE_3; - case MEDIA_BUS_FMT_UYVY8_2X8: - return ISI_CFG2_YCC_SWAP_MODE_2; - case MEDIA_BUS_FMT_YVYU8_2X8: - return ISI_CFG2_YCC_SWAP_MODE_1; - } - } else if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_RGB565) { - /* - * Preview path is enabled, it will convert UYVY to RGB format. - * But if sensor output format is not UYVY, we need to set - * YCC_SWAP_MODE to convert it as UYVY. - */ - switch (xlate->code) { - case MEDIA_BUS_FMT_VYUY8_2X8: - return ISI_CFG2_YCC_SWAP_MODE_1; - case MEDIA_BUS_FMT_YUYV8_2X8: - return ISI_CFG2_YCC_SWAP_MODE_2; - case MEDIA_BUS_FMT_YVYU8_2X8: - return ISI_CFG2_YCC_SWAP_MODE_3; - } - } - - /* - * By default, no swap for the codec path of Atmel ISI. So codec - * output is same as sensor's output. - * For instance, if sensor's output is YUYV, then codec outputs YUYV. - * And if sensor's output is UYVY, then codec outputs UYVY. - */ - return ISI_CFG2_YCC_SWAP_DEFAULT; -} - -static void configure_geometry(struct atmel_isi *isi, u32 width, - u32 height, const struct soc_camera_format_xlate *xlate) -{ - u32 cfg2, psize; - u32 fourcc = xlate->host_fmt->fourcc; - - isi->enable_preview_path = fourcc == V4L2_PIX_FMT_RGB565 || - fourcc == V4L2_PIX_FMT_RGB32; - - /* According to sensor's output format to set cfg2 */ - switch (xlate->code) { - default: - /* Grey */ - case MEDIA_BUS_FMT_Y8_1X8: - cfg2 = ISI_CFG2_GRAYSCALE | ISI_CFG2_COL_SPACE_YCbCr; - break; - /* YUV */ - case MEDIA_BUS_FMT_VYUY8_2X8: - case MEDIA_BUS_FMT_UYVY8_2X8: - case MEDIA_BUS_FMT_YVYU8_2X8: - case MEDIA_BUS_FMT_YUYV8_2X8: - cfg2 = ISI_CFG2_COL_SPACE_YCbCr | - setup_cfg2_yuv_swap(isi, xlate); - break; - /* RGB, TODO */ - } - - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - /* Set width */ - cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) & - ISI_CFG2_IM_HSIZE_MASK; - /* Set height */ - cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET) - & ISI_CFG2_IM_VSIZE_MASK; - isi_writel(isi, ISI_CFG2, cfg2); - - /* No down sampling, preview size equal to sensor output size */ - psize = ((width - 1) << ISI_PSIZE_PREV_HSIZE_OFFSET) & - ISI_PSIZE_PREV_HSIZE_MASK; - psize |= ((height - 1) << ISI_PSIZE_PREV_VSIZE_OFFSET) & - ISI_PSIZE_PREV_VSIZE_MASK; - isi_writel(isi, ISI_PSIZE, psize); - isi_writel(isi, ISI_PDECF, ISI_PDECF_NO_SAMPLING); - - return; -} - -static bool is_supported(struct soc_camera_device *icd, - const u32 pixformat) -{ - switch (pixformat) { - /* YUV, including grey */ - case V4L2_PIX_FMT_GREY: - case V4L2_PIX_FMT_YUYV: - case V4L2_PIX_FMT_UYVY: - case V4L2_PIX_FMT_YVYU: - case V4L2_PIX_FMT_VYUY: - /* RGB */ - case V4L2_PIX_FMT_RGB565: - return true; - default: - return false; - } -} - -static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi) -{ - if (isi->active) { - struct vb2_v4l2_buffer *vbuf = &isi->active->vb; - struct frame_buffer *buf = isi->active; - - list_del_init(&buf->list); - vbuf->vb2_buf.timestamp = ktime_get_ns(); - vbuf->sequence = isi->sequence++; - vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_DONE); - } - - if (list_empty(&isi->video_buffer_list)) { - isi->active = NULL; - } else { - /* start next dma frame. */ - isi->active = list_entry(isi->video_buffer_list.next, - struct frame_buffer, list); - if (!isi->enable_preview_path) { - isi_writel(isi, ISI_DMA_C_DSCR, - (u32)isi->active->p_dma_desc->fbd_phys); - isi_writel(isi, ISI_DMA_C_CTRL, - ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); - isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH); - } else { - isi_writel(isi, ISI_DMA_P_DSCR, - (u32)isi->active->p_dma_desc->fbd_phys); - isi_writel(isi, ISI_DMA_P_CTRL, - ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); - isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_P_CH); - } - } - return IRQ_HANDLED; -} - -/* ISI interrupt service routine */ -static irqreturn_t isi_interrupt(int irq, void *dev_id) -{ - struct atmel_isi *isi = dev_id; - u32 status, mask, pending; - irqreturn_t ret = IRQ_NONE; - - spin_lock(&isi->lock); - - status = isi_readl(isi, ISI_STATUS); - mask = isi_readl(isi, ISI_INTMASK); - pending = status & mask; - - if (pending & ISI_CTRL_SRST) { - complete(&isi->complete); - isi_writel(isi, ISI_INTDIS, ISI_CTRL_SRST); - ret = IRQ_HANDLED; - } else if (pending & ISI_CTRL_DIS) { - complete(&isi->complete); - isi_writel(isi, ISI_INTDIS, ISI_CTRL_DIS); - ret = IRQ_HANDLED; - } else { - if (likely(pending & ISI_SR_CXFR_DONE) || - likely(pending & ISI_SR_PXFR_DONE)) - ret = atmel_isi_handle_streaming(isi); - } - - spin_unlock(&isi->lock); - return ret; -} - -#define WAIT_ISI_RESET 1 -#define WAIT_ISI_DISABLE 0 -static int atmel_isi_wait_status(struct atmel_isi *isi, int wait_reset) -{ - unsigned long timeout; - /* - * The reset or disable will only succeed if we have a - * pixel clock from the camera. - */ - init_completion(&isi->complete); - - if (wait_reset) { - isi_writel(isi, ISI_INTEN, ISI_CTRL_SRST); - isi_writel(isi, ISI_CTRL, ISI_CTRL_SRST); - } else { - isi_writel(isi, ISI_INTEN, ISI_CTRL_DIS); - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - } - - timeout = wait_for_completion_timeout(&isi->complete, - msecs_to_jiffies(500)); - if (timeout == 0) - return -ETIMEDOUT; - - return 0; -} - -/* ------------------------------------------------------------------ - Videobuf operations - ------------------------------------------------------------------*/ -static int queue_setup(struct vb2_queue *vq, - unsigned int *nbuffers, unsigned int *nplanes, - unsigned int sizes[], struct device *alloc_devs[]) -{ - struct soc_camera_device *icd = soc_camera_from_vb2q(vq); - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - struct atmel_isi *isi = ici->priv; - unsigned long size; - - size = icd->sizeimage; - - if (!*nbuffers || *nbuffers > MAX_BUFFER_NUM) - *nbuffers = MAX_BUFFER_NUM; - - if (size * *nbuffers > VID_LIMIT_BYTES) - *nbuffers = VID_LIMIT_BYTES / size; - - *nplanes = 1; - sizes[0] = size; - - isi->sequence = 0; - isi->active = NULL; - - dev_dbg(icd->parent, "%s, count=%d, size=%ld\n", __func__, - *nbuffers, size); - - return 0; -} - -static int buffer_init(struct vb2_buffer *vb) -{ - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); - struct frame_buffer *buf = container_of(vbuf, struct frame_buffer, vb); - - buf->p_dma_desc = NULL; - INIT_LIST_HEAD(&buf->list); - - return 0; -} - -static int buffer_prepare(struct vb2_buffer *vb) -{ - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); - struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); - struct frame_buffer *buf = container_of(vbuf, struct frame_buffer, vb); - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - struct atmel_isi *isi = ici->priv; - unsigned long size; - struct isi_dma_desc *desc; - - size = icd->sizeimage; - - if (vb2_plane_size(vb, 0) < size) { - dev_err(icd->parent, "%s data will not fit into plane (%lu < %lu)\n", - __func__, vb2_plane_size(vb, 0), size); - return -EINVAL; - } - - vb2_set_plane_payload(vb, 0, size); - - if (!buf->p_dma_desc) { - if (list_empty(&isi->dma_desc_head)) { - dev_err(icd->parent, "Not enough dma descriptors.\n"); - return -EINVAL; - } else { - /* Get an available descriptor */ - desc = list_entry(isi->dma_desc_head.next, - struct isi_dma_desc, list); - /* Delete the descriptor since now it is used */ - list_del_init(&desc->list); - - /* Initialize the dma descriptor */ - desc->p_fbd->fb_address = - vb2_dma_contig_plane_dma_addr(vb, 0); - desc->p_fbd->next_fbd_address = 0; - set_dma_ctrl(desc->p_fbd, ISI_DMA_CTRL_WB); - - buf->p_dma_desc = desc; - } - } - return 0; -} - -static void buffer_cleanup(struct vb2_buffer *vb) -{ - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); - struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - struct atmel_isi *isi = ici->priv; - struct frame_buffer *buf = container_of(vbuf, struct frame_buffer, vb); - - /* This descriptor is available now and we add to head list */ - if (buf->p_dma_desc) - list_add(&buf->p_dma_desc->list, &isi->dma_desc_head); -} - -static void start_dma(struct atmel_isi *isi, struct frame_buffer *buffer) -{ - u32 ctrl, cfg1; - - cfg1 = isi_readl(isi, ISI_CFG1); - /* Enable irq: cxfr for the codec path, pxfr for the preview path */ - isi_writel(isi, ISI_INTEN, - ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE); - - /* Check if already in a frame */ - if (!isi->enable_preview_path) { - if (isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) { - dev_err(isi->soc_host.icd->parent, "Already in frame handling.\n"); - return; - } - - isi_writel(isi, ISI_DMA_C_DSCR, - (u32)buffer->p_dma_desc->fbd_phys); - isi_writel(isi, ISI_DMA_C_CTRL, - ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); - isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH); - } else { - isi_writel(isi, ISI_DMA_P_DSCR, - (u32)buffer->p_dma_desc->fbd_phys); - isi_writel(isi, ISI_DMA_P_CTRL, - ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); - isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_P_CH); - } - - cfg1 &= ~ISI_CFG1_FRATE_DIV_MASK; - /* Enable linked list */ - cfg1 |= isi->pdata.frate | ISI_CFG1_DISCR; - - /* Enable ISI */ - ctrl = ISI_CTRL_EN; - - if (!isi->enable_preview_path) - ctrl |= ISI_CTRL_CDC; - - isi_writel(isi, ISI_CTRL, ctrl); - isi_writel(isi, ISI_CFG1, cfg1); -} - -static void buffer_queue(struct vb2_buffer *vb) -{ - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); - struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - struct atmel_isi *isi = ici->priv; - struct frame_buffer *buf = container_of(vbuf, struct frame_buffer, vb); - unsigned long flags = 0; - - spin_lock_irqsave(&isi->lock, flags); - list_add_tail(&buf->list, &isi->video_buffer_list); - - if (isi->active == NULL) { - isi->active = buf; - if (vb2_is_streaming(vb->vb2_queue)) - start_dma(isi, buf); - } - spin_unlock_irqrestore(&isi->lock, flags); -} - -static int start_streaming(struct vb2_queue *vq, unsigned int count) -{ - struct soc_camera_device *icd = soc_camera_from_vb2q(vq); - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - struct atmel_isi *isi = ici->priv; - int ret; - - pm_runtime_get_sync(ici->v4l2_dev.dev); - - /* Reset ISI */ - ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); - if (ret < 0) { - dev_err(icd->parent, "Reset ISI timed out\n"); - pm_runtime_put(ici->v4l2_dev.dev); - return ret; - } - /* Disable all interrupts */ - isi_writel(isi, ISI_INTDIS, (u32)~0UL); - - configure_geometry(isi, icd->user_width, icd->user_height, - icd->current_fmt); - - spin_lock_irq(&isi->lock); - /* Clear any pending interrupt */ - isi_readl(isi, ISI_STATUS); - - if (count) - start_dma(isi, isi->active); - spin_unlock_irq(&isi->lock); - - return 0; -} - -/* abort streaming and wait for last buffer */ -static void stop_streaming(struct vb2_queue *vq) -{ - struct soc_camera_device *icd = soc_camera_from_vb2q(vq); - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - struct atmel_isi *isi = ici->priv; - struct frame_buffer *buf, *node; - int ret = 0; - unsigned long timeout; - - spin_lock_irq(&isi->lock); - isi->active = NULL; - /* Release all active buffers */ - list_for_each_entry_safe(buf, node, &isi->video_buffer_list, list) { - list_del_init(&buf->list); - vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); - } - spin_unlock_irq(&isi->lock); - - if (!isi->enable_preview_path) { - timeout = jiffies + FRAME_INTERVAL_MILLI_SEC * HZ; - /* Wait until the end of the current frame. */ - while ((isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) && - time_before(jiffies, timeout)) - msleep(1); - - if (time_after(jiffies, timeout)) - dev_err(icd->parent, - "Timeout waiting for finishing codec request\n"); - } - - /* Disable interrupts */ - isi_writel(isi, ISI_INTDIS, - ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE); - - /* Disable ISI and wait for it is done */ - ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); - if (ret < 0) - dev_err(icd->parent, "Disable ISI timed out\n"); - - pm_runtime_put(ici->v4l2_dev.dev); -} - -static const struct vb2_ops isi_video_qops = { - .queue_setup = queue_setup, - .buf_init = buffer_init, - .buf_prepare = buffer_prepare, - .buf_cleanup = buffer_cleanup, - .buf_queue = buffer_queue, - .start_streaming = start_streaming, - .stop_streaming = stop_streaming, - .wait_prepare = vb2_ops_wait_prepare, - .wait_finish = vb2_ops_wait_finish, -}; - -/* ------------------------------------------------------------------ - SOC camera operations for the device - ------------------------------------------------------------------*/ -static int isi_camera_init_videobuf(struct vb2_queue *q, - struct soc_camera_device *icd) -{ - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - - q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - q->io_modes = VB2_MMAP; - q->drv_priv = icd; - q->buf_struct_size = sizeof(struct frame_buffer); - q->ops = &isi_video_qops; - q->mem_ops = &vb2_dma_contig_memops; - q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - q->lock = &ici->host_lock; - q->dev = ici->v4l2_dev.dev; - - return vb2_queue_init(q); -} - -static int isi_camera_set_fmt(struct soc_camera_device *icd, - struct v4l2_format *f) -{ - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - const struct soc_camera_format_xlate *xlate; - struct v4l2_pix_format *pix = &f->fmt.pix; - struct v4l2_subdev_format format = { - .which = V4L2_SUBDEV_FORMAT_ACTIVE, - }; - struct v4l2_mbus_framefmt *mf = &format.format; - int ret; - - /* check with atmel-isi support format, if not support use YUYV */ - if (!is_supported(icd, pix->pixelformat)) - pix->pixelformat = V4L2_PIX_FMT_YUYV; - - xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); - if (!xlate) { - dev_warn(icd->parent, "Format %x not found\n", - pix->pixelformat); - return -EINVAL; - } - - dev_dbg(icd->parent, "Plan to set format %dx%d\n", - pix->width, pix->height); - - mf->width = pix->width; - mf->height = pix->height; - mf->field = pix->field; - mf->colorspace = pix->colorspace; - mf->code = xlate->code; - - ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &format); - if (ret < 0) - return ret; - - if (mf->code != xlate->code) - return -EINVAL; - - pix->width = mf->width; - pix->height = mf->height; - pix->field = mf->field; - pix->colorspace = mf->colorspace; - icd->current_fmt = xlate; - - dev_dbg(icd->parent, "Finally set format %dx%d\n", - pix->width, pix->height); - - return ret; -} - -static int isi_camera_try_fmt(struct soc_camera_device *icd, - struct v4l2_format *f) -{ - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - const struct soc_camera_format_xlate *xlate; - struct v4l2_pix_format *pix = &f->fmt.pix; - struct v4l2_subdev_pad_config pad_cfg; - struct v4l2_subdev_format format = { - .which = V4L2_SUBDEV_FORMAT_TRY, - }; - struct v4l2_mbus_framefmt *mf = &format.format; - u32 pixfmt = pix->pixelformat; - int ret; - - /* check with atmel-isi support format, if not support use YUYV */ - if (!is_supported(icd, pix->pixelformat)) - pix->pixelformat = V4L2_PIX_FMT_YUYV; - - xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); - if (pixfmt && !xlate) { - dev_warn(icd->parent, "Format %x not found\n", pixfmt); - return -EINVAL; - } - - /* limit to Atmel ISI hardware capabilities */ - if (pix->height > MAX_SUPPORT_HEIGHT) - pix->height = MAX_SUPPORT_HEIGHT; - if (pix->width > MAX_SUPPORT_WIDTH) - pix->width = MAX_SUPPORT_WIDTH; - - /* limit to sensor capabilities */ - mf->width = pix->width; - mf->height = pix->height; - mf->field = pix->field; - mf->colorspace = pix->colorspace; - mf->code = xlate->code; - - ret = v4l2_subdev_call(sd, pad, set_fmt, &pad_cfg, &format); - if (ret < 0) - return ret; - - pix->width = mf->width; - pix->height = mf->height; - pix->colorspace = mf->colorspace; - - switch (mf->field) { - case V4L2_FIELD_ANY: - pix->field = V4L2_FIELD_NONE; - break; - case V4L2_FIELD_NONE: - break; - default: - dev_err(icd->parent, "Field type %d unsupported.\n", - mf->field); - ret = -EINVAL; - } - - return ret; -} - -static const struct soc_mbus_pixelfmt isi_camera_formats[] = { - { - .fourcc = V4L2_PIX_FMT_YUYV, - .name = "Packed YUV422 16 bit", - .bits_per_sample = 8, - .packing = SOC_MBUS_PACKING_2X8_PADHI, - .order = SOC_MBUS_ORDER_LE, - .layout = SOC_MBUS_LAYOUT_PACKED, - }, - { - .fourcc = V4L2_PIX_FMT_RGB565, - .name = "RGB565", - .bits_per_sample = 8, - .packing = SOC_MBUS_PACKING_2X8_PADHI, - .order = SOC_MBUS_ORDER_LE, - .layout = SOC_MBUS_LAYOUT_PACKED, - }, -}; - -/* This will be corrected as we get more formats */ -static bool isi_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt) -{ - return fmt->packing == SOC_MBUS_PACKING_NONE || - (fmt->bits_per_sample == 8 && - fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) || - (fmt->bits_per_sample > 8 && - fmt->packing == SOC_MBUS_PACKING_EXTEND16); -} - -#define ISI_BUS_PARAM (V4L2_MBUS_MASTER | \ - V4L2_MBUS_HSYNC_ACTIVE_HIGH | \ - V4L2_MBUS_HSYNC_ACTIVE_LOW | \ - V4L2_MBUS_VSYNC_ACTIVE_HIGH | \ - V4L2_MBUS_VSYNC_ACTIVE_LOW | \ - V4L2_MBUS_PCLK_SAMPLE_RISING | \ - V4L2_MBUS_PCLK_SAMPLE_FALLING | \ - V4L2_MBUS_DATA_ACTIVE_HIGH) - -static int isi_camera_try_bus_param(struct soc_camera_device *icd, - unsigned char buswidth) -{ - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - struct atmel_isi *isi = ici->priv; - struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; - unsigned long common_flags; - int ret; - - ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg); - if (!ret) { - common_flags = soc_mbus_config_compatible(&cfg, - ISI_BUS_PARAM); - if (!common_flags) { - dev_warn(icd->parent, - "Flags incompatible: camera 0x%x, host 0x%x\n", - cfg.flags, ISI_BUS_PARAM); - return -EINVAL; - } - } else if (ret != -ENOIOCTLCMD) { - return ret; - } - - if ((1 << (buswidth - 1)) & isi->width_flags) - return 0; - return -EINVAL; -} - - -static int isi_camera_get_formats(struct soc_camera_device *icd, - unsigned int idx, - struct soc_camera_format_xlate *xlate) -{ - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - int formats = 0, ret, i, n; - /* sensor format */ - struct v4l2_subdev_mbus_code_enum code = { - .which = V4L2_SUBDEV_FORMAT_ACTIVE, - .index = idx, - }; - /* soc camera host format */ - const struct soc_mbus_pixelfmt *fmt; - - ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code); - if (ret < 0) - /* No more formats */ - return 0; - - fmt = soc_mbus_get_fmtdesc(code.code); - if (!fmt) { - dev_err(icd->parent, - "Invalid format code #%u: %d\n", idx, code.code); - return 0; - } - - /* This also checks support for the requested bits-per-sample */ - ret = isi_camera_try_bus_param(icd, fmt->bits_per_sample); - if (ret < 0) { - dev_err(icd->parent, - "Fail to try the bus parameters.\n"); - return 0; - } - - switch (code.code) { - case MEDIA_BUS_FMT_UYVY8_2X8: - case MEDIA_BUS_FMT_VYUY8_2X8: - case MEDIA_BUS_FMT_YUYV8_2X8: - case MEDIA_BUS_FMT_YVYU8_2X8: - n = ARRAY_SIZE(isi_camera_formats); - formats += n; - for (i = 0; xlate && i < n; i++, xlate++) { - xlate->host_fmt = &isi_camera_formats[i]; - xlate->code = code.code; - dev_dbg(icd->parent, "Providing format %s using code %d\n", - xlate->host_fmt->name, xlate->code); - } - break; - default: - if (!isi_camera_packing_supported(fmt)) - return 0; - if (xlate) - dev_dbg(icd->parent, - "Providing format %s in pass-through mode\n", - fmt->name); - } - - /* Generic pass-through */ - formats++; - if (xlate) { - xlate->host_fmt = fmt; - xlate->code = code.code; - xlate++; - } - - return formats; -} - -static int isi_camera_add_device(struct soc_camera_device *icd) -{ - dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n", - icd->devnum); - - return 0; -} - -static void isi_camera_remove_device(struct soc_camera_device *icd) -{ - dev_dbg(icd->parent, "Atmel ISI Camera driver detached from camera %d\n", - icd->devnum); -} - -static unsigned int isi_camera_poll(struct file *file, poll_table *pt) -{ - struct soc_camera_device *icd = file->private_data; - - return vb2_poll(&icd->vb2_vidq, file, pt); -} - -static int isi_camera_querycap(struct soc_camera_host *ici, - struct v4l2_capability *cap) -{ - strcpy(cap->driver, "atmel-isi"); - strcpy(cap->card, "Atmel Image Sensor Interface"); - cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; - cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; - - return 0; -} - -static int isi_camera_set_bus_param(struct soc_camera_device *icd) -{ - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - struct atmel_isi *isi = ici->priv; - struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; - unsigned long common_flags; - int ret; - u32 cfg1 = 0; - - ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg); - if (!ret) { - common_flags = soc_mbus_config_compatible(&cfg, - ISI_BUS_PARAM); - if (!common_flags) { - dev_warn(icd->parent, - "Flags incompatible: camera 0x%x, host 0x%x\n", - cfg.flags, ISI_BUS_PARAM); - return -EINVAL; - } - } else if (ret != -ENOIOCTLCMD) { - return ret; - } else { - common_flags = ISI_BUS_PARAM; - } - dev_dbg(icd->parent, "Flags cam: 0x%x host: 0x%x common: 0x%lx\n", - cfg.flags, ISI_BUS_PARAM, common_flags); - - /* Make choises, based on platform preferences */ - if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && - (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { - if (isi->pdata.hsync_act_low) - common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH; - else - common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW; - } - - if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) && - (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) { - if (isi->pdata.vsync_act_low) - common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH; - else - common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW; - } - - if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) && - (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) { - if (isi->pdata.pclk_act_falling) - common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING; - else - common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING; - } - - cfg.flags = common_flags; - ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg); - if (ret < 0 && ret != -ENOIOCTLCMD) { - dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n", - common_flags, ret); - return ret; - } - - /* set bus param for ISI */ - if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) - cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW; - if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) - cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW; - if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) - cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; - - dev_dbg(icd->parent, "vsync active %s, hsync active %s, sampling on pix clock %s edge\n", - common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? "low" : "high", - common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? "low" : "high", - common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ? "falling" : "rising"); - - if (isi->pdata.has_emb_sync) - cfg1 |= ISI_CFG1_EMB_SYNC; - if (isi->pdata.full_mode) - cfg1 |= ISI_CFG1_FULL_MODE; - - cfg1 |= ISI_CFG1_THMASK_BEATS_16; - - /* Enable PM and peripheral clock before operate isi registers */ - pm_runtime_get_sync(ici->v4l2_dev.dev); - - isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); - isi_writel(isi, ISI_CFG1, cfg1); - - pm_runtime_put(ici->v4l2_dev.dev); - - return 0; -} - -static struct soc_camera_host_ops isi_soc_camera_host_ops = { - .owner = THIS_MODULE, - .add = isi_camera_add_device, - .remove = isi_camera_remove_device, - .set_fmt = isi_camera_set_fmt, - .try_fmt = isi_camera_try_fmt, - .get_formats = isi_camera_get_formats, - .init_videobuf2 = isi_camera_init_videobuf, - .poll = isi_camera_poll, - .querycap = isi_camera_querycap, - .set_bus_param = isi_camera_set_bus_param, -}; - -/* -----------------------------------------------------------------------*/ -static int atmel_isi_remove(struct platform_device *pdev) -{ - struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); - struct atmel_isi *isi = container_of(soc_host, - struct atmel_isi, soc_host); - - soc_camera_host_unregister(soc_host); - dma_free_coherent(&pdev->dev, - sizeof(struct fbd) * MAX_BUFFER_NUM, - isi->p_fb_descriptors, - isi->fb_descriptors_phys); - pm_runtime_disable(&pdev->dev); - - return 0; -} - -static int atmel_isi_parse_dt(struct atmel_isi *isi, - struct platform_device *pdev) -{ - struct device_node *np= pdev->dev.of_node; - struct v4l2_of_endpoint ep; - int err; - - /* Default settings for ISI */ - isi->pdata.full_mode = 1; - isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL; - - np = of_graph_get_next_endpoint(np, NULL); - if (!np) { - dev_err(&pdev->dev, "Could not find the endpoint\n"); - return -EINVAL; - } - - err = v4l2_of_parse_endpoint(np, &ep); - of_node_put(np); - if (err) { - dev_err(&pdev->dev, "Could not parse the endpoint\n"); - return err; - } - - switch (ep.bus.parallel.bus_width) { - case 8: - isi->pdata.data_width_flags = ISI_DATAWIDTH_8; - break; - case 10: - isi->pdata.data_width_flags = - ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10; - break; - default: - dev_err(&pdev->dev, "Unsupported bus width: %d\n", - ep.bus.parallel.bus_width); - return -EINVAL; - } - - if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) - isi->pdata.hsync_act_low = true; - if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) - isi->pdata.vsync_act_low = true; - if (ep.bus.parallel.flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) - isi->pdata.pclk_act_falling = true; - - if (ep.bus_type == V4L2_MBUS_BT656) - isi->pdata.has_emb_sync = true; - - return 0; -} - -static int atmel_isi_probe(struct platform_device *pdev) -{ - int irq; - struct atmel_isi *isi; - struct resource *regs; - int ret, i; - struct soc_camera_host *soc_host; - - isi = devm_kzalloc(&pdev->dev, sizeof(struct atmel_isi), GFP_KERNEL); - if (!isi) { - dev_err(&pdev->dev, "Can't allocate interface!\n"); - return -ENOMEM; - } - - isi->pclk = devm_clk_get(&pdev->dev, "isi_clk"); - if (IS_ERR(isi->pclk)) - return PTR_ERR(isi->pclk); - - ret = atmel_isi_parse_dt(isi, pdev); - if (ret) - return ret; - - isi->active = NULL; - spin_lock_init(&isi->lock); - INIT_LIST_HEAD(&isi->video_buffer_list); - INIT_LIST_HEAD(&isi->dma_desc_head); - - isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev, - sizeof(struct fbd) * MAX_BUFFER_NUM, - &isi->fb_descriptors_phys, - GFP_KERNEL); - if (!isi->p_fb_descriptors) { - dev_err(&pdev->dev, "Can't allocate descriptors!\n"); - return -ENOMEM; - } - - for (i = 0; i < MAX_BUFFER_NUM; i++) { - isi->dma_desc[i].p_fbd = isi->p_fb_descriptors + i; - isi->dma_desc[i].fbd_phys = isi->fb_descriptors_phys + - i * sizeof(struct fbd); - list_add(&isi->dma_desc[i].list, &isi->dma_desc_head); - } - - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - isi->regs = devm_ioremap_resource(&pdev->dev, regs); - if (IS_ERR(isi->regs)) { - ret = PTR_ERR(isi->regs); - goto err_ioremap; - } - - if (isi->pdata.data_width_flags & ISI_DATAWIDTH_8) - isi->width_flags = 1 << 7; - if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10) - isi->width_flags |= 1 << 9; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto err_req_irq; - } - - ret = devm_request_irq(&pdev->dev, irq, isi_interrupt, 0, "isi", isi); - if (ret) { - dev_err(&pdev->dev, "Unable to request irq %d\n", irq); - goto err_req_irq; - } - isi->irq = irq; - - soc_host = &isi->soc_host; - soc_host->drv_name = "isi-camera"; - soc_host->ops = &isi_soc_camera_host_ops; - soc_host->priv = isi; - soc_host->v4l2_dev.dev = &pdev->dev; - soc_host->nr = pdev->id; - - pm_suspend_ignore_children(&pdev->dev, true); - pm_runtime_enable(&pdev->dev); - - ret = soc_camera_host_register(soc_host); - if (ret) { - dev_err(&pdev->dev, "Unable to register soc camera host\n"); - goto err_register_soc_camera_host; - } - return 0; - -err_register_soc_camera_host: - pm_runtime_disable(&pdev->dev); -err_req_irq: -err_ioremap: - dma_free_coherent(&pdev->dev, - sizeof(struct fbd) * MAX_BUFFER_NUM, - isi->p_fb_descriptors, - isi->fb_descriptors_phys); - - return ret; -} - -#ifdef CONFIG_PM -static int atmel_isi_runtime_suspend(struct device *dev) -{ - struct soc_camera_host *soc_host = to_soc_camera_host(dev); - struct atmel_isi *isi = container_of(soc_host, - struct atmel_isi, soc_host); - - clk_disable_unprepare(isi->pclk); - - return 0; -} -static int atmel_isi_runtime_resume(struct device *dev) -{ - struct soc_camera_host *soc_host = to_soc_camera_host(dev); - struct atmel_isi *isi = container_of(soc_host, - struct atmel_isi, soc_host); - - return clk_prepare_enable(isi->pclk); -} -#endif /* CONFIG_PM */ - -static const struct dev_pm_ops atmel_isi_dev_pm_ops = { - SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, - atmel_isi_runtime_resume, NULL) -}; - -static const struct of_device_id atmel_isi_of_match[] = { - { .compatible = "atmel,at91sam9g45-isi" }, - { } -}; -MODULE_DEVICE_TABLE(of, atmel_isi_of_match); - -static struct platform_driver atmel_isi_driver = { - .remove = atmel_isi_remove, - .driver = { - .name = "atmel_isi", - .of_match_table = of_match_ptr(atmel_isi_of_match), - .pm = &atmel_isi_dev_pm_ops, - }, -}; - -module_platform_driver_probe(atmel_isi_driver, atmel_isi_probe); - -MODULE_AUTHOR("Josh Wu <josh.wu@atmel.com>"); -MODULE_DESCRIPTION("The V4L2 driver for Atmel Linux"); -MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("video"); diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index a15bfb5aea47..96dc01750bc0 100644 --- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -1801,18 +1801,7 @@ static struct platform_driver sh_mobile_ceu_driver = { .remove = sh_mobile_ceu_remove, }; -static int __init sh_mobile_ceu_init(void) -{ - return platform_driver_register(&sh_mobile_ceu_driver); -} - -static void __exit sh_mobile_ceu_exit(void) -{ - platform_driver_unregister(&sh_mobile_ceu_driver); -} - -module_init(sh_mobile_ceu_init); -module_exit(sh_mobile_ceu_exit); +module_platform_driver(sh_mobile_ceu_driver); MODULE_DESCRIPTION("SuperH Mobile CEU driver"); MODULE_AUTHOR("Magnus Damm"); diff --git a/drivers/media/platform/soc_camera/soc_camera.c b/drivers/media/platform/soc_camera/soc_camera.c index edd1c1de4e33..3c9421f4d8e3 100644 --- a/drivers/media/platform/soc_camera/soc_camera.c +++ b/drivers/media/platform/soc_camera/soc_camera.c @@ -37,18 +37,12 @@ #include <media/v4l2-ioctl.h> #include <media/v4l2-dev.h> #include <media/v4l2-of.h> -#include <media/videobuf-core.h> #include <media/videobuf2-v4l2.h> /* Default to VGA resolution */ #define DEFAULT_WIDTH 640 #define DEFAULT_HEIGHT 480 -#define is_streaming(ici, icd) \ - (((ici)->ops->init_videobuf) ? \ - (icd)->vb_vidq.streaming : \ - vb2_is_streaming(&(icd)->vb2_vidq)) - #define MAP_MAX_NUM 32 static DECLARE_BITMAP(device_map, MAP_MAX_NUM); static LIST_HEAD(hosts); @@ -367,23 +361,13 @@ static int soc_camera_reqbufs(struct file *file, void *priv, { int ret; struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); if (icd->streamer && icd->streamer != file) return -EBUSY; - if (ici->ops->init_videobuf) { - ret = videobuf_reqbufs(&icd->vb_vidq, p); - if (ret < 0) - return ret; - - ret = ici->ops->reqbufs(icd, p); - } else { - ret = vb2_reqbufs(&icd->vb2_vidq, p); - } - + ret = vb2_reqbufs(&icd->vb2_vidq, p); if (!ret) icd->streamer = p->count ? file : NULL; return ret; @@ -393,61 +377,44 @@ static int soc_camera_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); - if (ici->ops->init_videobuf) - return videobuf_querybuf(&icd->vb_vidq, p); - else - return vb2_querybuf(&icd->vb2_vidq, p); + return vb2_querybuf(&icd->vb2_vidq, p); } static int soc_camera_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); if (icd->streamer != file) return -EBUSY; - if (ici->ops->init_videobuf) - return videobuf_qbuf(&icd->vb_vidq, p); - else - return vb2_qbuf(&icd->vb2_vidq, p); + return vb2_qbuf(&icd->vb2_vidq, p); } static int soc_camera_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); if (icd->streamer != file) return -EBUSY; - if (ici->ops->init_videobuf) - return videobuf_dqbuf(&icd->vb_vidq, p, file->f_flags & O_NONBLOCK); - else - return vb2_dqbuf(&icd->vb2_vidq, p, file->f_flags & O_NONBLOCK); + return vb2_dqbuf(&icd->vb2_vidq, p, file->f_flags & O_NONBLOCK); } static int soc_camera_create_bufs(struct file *file, void *priv, struct v4l2_create_buffers *create) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); int ret; - /* videobuf2 only */ - if (ici->ops->init_videobuf) - return -ENOTTY; - if (icd->streamer && icd->streamer != file) return -EBUSY; @@ -461,24 +428,14 @@ static int soc_camera_prepare_buf(struct file *file, void *priv, struct v4l2_buffer *b) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - /* videobuf2 only */ - if (ici->ops->init_videobuf) - return -EINVAL; - else - return vb2_prepare_buf(&icd->vb2_vidq, b); + return vb2_prepare_buf(&icd->vb2_vidq, b); } static int soc_camera_expbuf(struct file *file, void *priv, struct v4l2_exportbuffer *p) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); - - /* videobuf2 only */ - if (ici->ops->init_videobuf) - return -ENOTTY; if (icd->streamer && icd->streamer != file) return -EBUSY; @@ -602,8 +559,6 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd, icd->sizeimage = pix->sizeimage; icd->colorspace = pix->colorspace; icd->field = pix->field; - if (ici->ops->init_videobuf) - icd->vb_vidq.field = pix->field; dev_dbg(icd->pdev, "set width: %d height: %d\n", icd->user_width, icd->user_height); @@ -745,13 +700,9 @@ static int soc_camera_open(struct file *file) if (ret < 0) goto esfmt; - if (ici->ops->init_videobuf) { - ici->ops->init_videobuf(&icd->vb_vidq, icd); - } else { - ret = ici->ops->init_videobuf2(&icd->vb2_vidq, icd); - if (ret < 0) - goto einitvb; - } + ret = ici->ops->init_videobuf2(&icd->vb2_vidq, icd); + if (ret < 0) + goto einitvb; v4l2_ctrl_handler_setup(&icd->ctrl_handler); } mutex_unlock(&ici->host_lock); @@ -842,10 +793,7 @@ static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma) if (mutex_lock_interruptible(&ici->host_lock)) return -ERESTARTSYS; - if (ici->ops->init_videobuf) - err = videobuf_mmap_mapper(&icd->vb_vidq, vma); - else - err = vb2_mmap(&icd->vb2_vidq, vma); + err = vb2_mmap(&icd->vb2_vidq, vma); mutex_unlock(&ici->host_lock); dev_dbg(icd->pdev, "vma start=0x%08lx, size=%ld, ret=%d\n", @@ -866,10 +814,7 @@ static unsigned int soc_camera_poll(struct file *file, poll_table *pt) return POLLERR; mutex_lock(&ici->host_lock); - if (ici->ops->init_videobuf && list_empty(&icd->vb_vidq.stream)) - dev_err(icd->pdev, "Trying to poll with no queued buffers!\n"); - else - res = ici->ops->poll(file, pt); + res = ici->ops->poll(file, pt); mutex_unlock(&ici->host_lock); return res; } @@ -900,7 +845,7 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv, if (icd->streamer && icd->streamer != file) return -EBUSY; - if (is_streaming(to_soc_camera_host(icd->parent), icd)) { + if (vb2_is_streaming(&icd->vb2_vidq)) { dev_err(icd->pdev, "S_FMT denied: queue initialised\n"); return -EBUSY; } @@ -971,7 +916,6 @@ static int soc_camera_streamon(struct file *file, void *priv, enum v4l2_buf_type i) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct v4l2_subdev *sd = soc_camera_to_subdev(icd); int ret; @@ -983,12 +927,8 @@ static int soc_camera_streamon(struct file *file, void *priv, if (icd->streamer != file) return -EBUSY; - /* This calls buf_queue from host driver's videobuf_queue_ops */ - if (ici->ops->init_videobuf) - ret = videobuf_streamon(&icd->vb_vidq); - else - ret = vb2_streamon(&icd->vb2_vidq, i); - + /* This calls buf_queue from host driver's videobuf2_queue_ops */ + ret = vb2_streamon(&icd->vb2_vidq, i); if (!ret) v4l2_subdev_call(sd, video, s_stream, 1); @@ -1000,7 +940,6 @@ static int soc_camera_streamoff(struct file *file, void *priv, { struct soc_camera_device *icd = file->private_data; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct soc_camera_host *ici = to_soc_camera_host(icd->parent); int ret; WARN_ON(priv != file->private_data); @@ -1012,13 +951,10 @@ static int soc_camera_streamoff(struct file *file, void *priv, return -EBUSY; /* - * This calls buf_release from host driver's videobuf_queue_ops for all + * This calls buf_release from host driver's videobuf2_queue_ops for all * remaining buffers. When the last buffer is freed, stop capture */ - if (ici->ops->init_videobuf) - ret = videobuf_streamoff(&icd->vb_vidq); - else - ret = vb2_streamoff(&icd->vb2_vidq, i); + ret = vb2_streamoff(&icd->vb2_vidq, i); v4l2_subdev_call(sd, video, s_stream, 0); @@ -1053,7 +989,7 @@ static int soc_camera_s_selection(struct file *file, void *fh, if (s->target == V4L2_SEL_TGT_COMPOSE) { /* No output size change during a running capture! */ - if (is_streaming(ici, icd) && + if (vb2_is_streaming(&icd->vb2_vidq) && (icd->user_width != s->r.width || icd->user_height != s->r.height)) return -EBUSY; @@ -1066,7 +1002,8 @@ static int soc_camera_s_selection(struct file *file, void *fh, return -EBUSY; } - if (s->target == V4L2_SEL_TGT_CROP && is_streaming(ici, icd) && + if (s->target == V4L2_SEL_TGT_CROP && + vb2_is_streaming(&icd->vb2_vidq) && ici->ops->set_liveselection) ret = ici->ops->set_liveselection(icd, s); else @@ -1910,9 +1847,7 @@ int soc_camera_host_register(struct soc_camera_host *ici) !ici->ops->set_fmt || !ici->ops->set_bus_param || !ici->ops->querycap || - ((!ici->ops->init_videobuf || - !ici->ops->reqbufs) && - !ici->ops->init_videobuf2) || + !ici->ops->init_videobuf2 || !ici->ops->poll || !ici->v4l2_dev.dev) return -EINVAL; diff --git a/drivers/media/platform/soc_camera/soc_scale_crop.c b/drivers/media/platform/soc_camera/soc_scale_crop.c index f77252d6ccd3..0116097c0c0f 100644 --- a/drivers/media/platform/soc_camera/soc_scale_crop.c +++ b/drivers/media/platform/soc_camera/soc_scale_crop.c @@ -62,7 +62,8 @@ int soc_camera_client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect) EXPORT_SYMBOL(soc_camera_client_g_rect); /* Client crop has changed, update our sub-rectangle to remain within the area */ -static void update_subrect(struct v4l2_rect *rect, struct v4l2_rect *subrect) +static void move_and_crop_subrect(struct v4l2_rect *rect, + struct v4l2_rect *subrect) { if (rect->width < subrect->width) subrect->width = rect->width; @@ -72,14 +73,14 @@ static void update_subrect(struct v4l2_rect *rect, struct v4l2_rect *subrect) if (rect->left > subrect->left) subrect->left = rect->left; - else if (rect->left + rect->width > + else if (rect->left + rect->width < subrect->left + subrect->width) subrect->left = rect->left + rect->width - subrect->width; if (rect->top > subrect->top) subrect->top = rect->top; - else if (rect->top + rect->height > + else if (rect->top + rect->height < subrect->top + subrect->height) subrect->top = rect->top + rect->height - subrect->height; @@ -216,7 +217,7 @@ int soc_camera_client_s_selection(struct v4l2_subdev *sd, if (!ret) { *target_rect = *cam_rect; - update_subrect(target_rect, subrect); + move_and_crop_subrect(target_rect, subrect); } return ret; @@ -299,7 +300,7 @@ update_cache: if (host_1to1) *subrect = *rect; else - update_subrect(rect, subrect); + move_and_crop_subrect(rect, subrect); return 0; } diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c index 7652ce2ec1dc..59280ac31937 100644 --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c @@ -865,9 +865,8 @@ static int c8sectpfe_probe(struct platform_device *pdev) } /* Setup timer interrupt */ - init_timer(&fei->timer); - fei->timer.function = c8sectpfe_timer_interrupt; - fei->timer.data = (unsigned long)fei; + setup_timer(&fei->timer, c8sectpfe_timer_interrupt, + (unsigned long)fei); mutex_init(&fei->lock); diff --git a/drivers/staging/media/st-cec/Makefile b/drivers/media/platform/sti/cec/Makefile index f07905e1448a..f07905e1448a 100644 --- a/drivers/staging/media/st-cec/Makefile +++ b/drivers/media/platform/sti/cec/Makefile diff --git a/drivers/staging/media/st-cec/stih-cec.c b/drivers/media/platform/sti/cec/stih-cec.c index 3c25638a9610..39ff55145a82 100644 --- a/drivers/staging/media/st-cec/stih-cec.c +++ b/drivers/media/platform/sti/cec/stih-cec.c @@ -1,6 +1,4 @@ /* - * drivers/staging/media/st-cec/stih-cec.c - * * STIH4xx CEC driver * Copyright (C) STMicroelectronic SA 2016 * @@ -15,9 +13,11 @@ #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <media/cec.h> +#include <media/cec-notifier.h> #define CEC_NAME "stih-cec" @@ -129,11 +129,12 @@ struct stih_cec { void __iomem *regs; int irq; u32 irq_status; + struct cec_notifier *notifier; }; static int stih_cec_adap_enable(struct cec_adapter *adap, bool enable) { - struct stih_cec *cec = adap->priv; + struct stih_cec *cec = cec_get_drvdata(adap); if (enable) { /* The doc says (input TCLK_PERIOD * CEC_CLK_DIV) = 0.1ms */ @@ -189,7 +190,7 @@ static int stih_cec_adap_enable(struct cec_adapter *adap, bool enable) static int stih_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr) { - struct stih_cec *cec = adap->priv; + struct stih_cec *cec = cec_get_drvdata(adap); u32 reg = readl(cec->regs + CEC_ADDR_TABLE); reg |= 1 << logical_addr; @@ -205,7 +206,7 @@ static int stih_cec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr) static int stih_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg) { - struct stih_cec *cec = adap->priv; + struct stih_cec *cec = cec_get_drvdata(adap); int i; /* Copy message into registers */ @@ -303,12 +304,29 @@ static int stih_cec_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct resource *res; struct stih_cec *cec; + struct device_node *np; + struct platform_device *hdmi_dev; int ret; cec = devm_kzalloc(dev, sizeof(*cec), GFP_KERNEL); if (!cec) return -ENOMEM; + np = of_parse_phandle(pdev->dev.of_node, "hdmi-phandle", 0); + + if (!np) { + dev_err(&pdev->dev, "Failed to find hdmi node in device tree\n"); + return -ENODEV; + } + + hdmi_dev = of_find_device_by_node(np); + if (!hdmi_dev) + return -EPROBE_DEFER; + + cec->notifier = cec_notifier_get(&hdmi_dev->dev); + if (!cec->notifier) + return -ENOMEM; + cec->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -335,7 +353,7 @@ static int stih_cec_probe(struct platform_device *pdev) cec->adap = cec_allocate_adapter(&sti_cec_adap_ops, cec, CEC_NAME, CEC_CAP_LOG_ADDRS | CEC_CAP_PASSTHROUGH | - CEC_CAP_PHYS_ADDR | CEC_CAP_TRANSMIT, 1); + CEC_CAP_TRANSMIT, 1); ret = PTR_ERR_OR_ZERO(cec->adap); if (ret) return ret; @@ -346,12 +364,19 @@ static int stih_cec_probe(struct platform_device *pdev) return ret; } + cec_register_cec_notifier(cec->adap, cec->notifier); + platform_set_drvdata(pdev, cec); return 0; } static int stih_cec_remove(struct platform_device *pdev) { + struct stih_cec *cec = platform_get_drvdata(pdev); + + cec_unregister_adapter(cec->adap); + cec_notifier_put(cec->notifier); + return 0; } diff --git a/drivers/media/platform/sti/delta/delta-mjpeg-dec.c b/drivers/media/platform/sti/delta/delta-mjpeg-dec.c index e79bdc611432..84ea43c0eb46 100644 --- a/drivers/media/platform/sti/delta/delta-mjpeg-dec.c +++ b/drivers/media/platform/sti/delta/delta-mjpeg-dec.c @@ -375,7 +375,7 @@ static int delta_mjpeg_decode(struct delta_ctx *pctx, struct delta_au *pau) struct delta_mjpeg_ctx *ctx = to_ctx(pctx); int ret; struct delta_au au = *pau; - unsigned int data_offset; + unsigned int data_offset = 0; struct mjpeg_header *header = &ctx->header_struct; if (!ctx->header) { diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c index 23472e3784ff..e2cf2b90e500 100644 --- a/drivers/media/platform/ti-vpe/vpdma.c +++ b/drivers/media/platform/ti-vpe/vpdma.c @@ -801,17 +801,17 @@ static void dump_dtd(struct vpdma_dtd *dtd) * flags: VPDMA flags to configure some descriptor fileds */ void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width, - const struct v4l2_rect *c_rect, + int stride, const struct v4l2_rect *c_rect, const struct vpdma_data_format *fmt, dma_addr_t dma_addr, int max_w, int max_h, enum vpdma_channel chan, u32 flags) { - vpdma_rawchan_add_out_dtd(list, width, c_rect, fmt, dma_addr, + vpdma_rawchan_add_out_dtd(list, width, stride, c_rect, fmt, dma_addr, max_w, max_h, chan_info[chan].num, flags); } EXPORT_SYMBOL(vpdma_add_out_dtd); void vpdma_rawchan_add_out_dtd(struct vpdma_desc_list *list, int width, - const struct v4l2_rect *c_rect, + int stride, const struct v4l2_rect *c_rect, const struct vpdma_data_format *fmt, dma_addr_t dma_addr, int max_w, int max_h, int raw_vpdma_chan, u32 flags) { @@ -821,7 +821,6 @@ void vpdma_rawchan_add_out_dtd(struct vpdma_desc_list *list, int width, int channel, next_chan; struct v4l2_rect rect = *c_rect; int depth = fmt->depth; - int stride; struct vpdma_dtd *dtd; channel = next_chan = raw_vpdma_chan; @@ -833,8 +832,6 @@ void vpdma_rawchan_add_out_dtd(struct vpdma_desc_list *list, int width, depth = 8; } - stride = ALIGN((depth * width) >> 3, VPDMA_STRIDE_ALIGN); - dma_addr += rect.top * stride + (rect.left * depth >> 3); dtd = list->next; @@ -882,7 +879,7 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd); * contribute to the client) */ void vpdma_add_in_dtd(struct vpdma_desc_list *list, int width, - const struct v4l2_rect *c_rect, + int stride, const struct v4l2_rect *c_rect, const struct vpdma_data_format *fmt, dma_addr_t dma_addr, enum vpdma_channel chan, int field, u32 flags, int frame_width, int frame_height, int start_h, int start_v) @@ -892,7 +889,6 @@ void vpdma_add_in_dtd(struct vpdma_desc_list *list, int width, int depth = fmt->depth; int channel, next_chan; struct v4l2_rect rect = *c_rect; - int stride; struct vpdma_dtd *dtd; channel = next_chan = chan_info[chan].num; @@ -904,8 +900,6 @@ void vpdma_add_in_dtd(struct vpdma_desc_list *list, int width, depth = 8; } - stride = ALIGN((depth * width) >> 3, VPDMA_STRIDE_ALIGN); - dma_addr += rect.top * stride + (rect.left * depth >> 3); dtd = list->next; diff --git a/drivers/media/platform/ti-vpe/vpdma.h b/drivers/media/platform/ti-vpe/vpdma.h index 131700c112b2..7e611501c291 100644 --- a/drivers/media/platform/ti-vpe/vpdma.h +++ b/drivers/media/platform/ti-vpe/vpdma.h @@ -242,16 +242,16 @@ void vpdma_add_sync_on_channel_ctd(struct vpdma_desc_list *list, void vpdma_add_abort_channel_ctd(struct vpdma_desc_list *list, int chan_num); void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width, - const struct v4l2_rect *c_rect, + int stride, const struct v4l2_rect *c_rect, const struct vpdma_data_format *fmt, dma_addr_t dma_addr, int max_w, int max_h, enum vpdma_channel chan, u32 flags); void vpdma_rawchan_add_out_dtd(struct vpdma_desc_list *list, int width, - const struct v4l2_rect *c_rect, + int stride, const struct v4l2_rect *c_rect, const struct vpdma_data_format *fmt, dma_addr_t dma_addr, int max_w, int max_h, int raw_vpdma_chan, u32 flags); void vpdma_add_in_dtd(struct vpdma_desc_list *list, int width, - const struct v4l2_rect *c_rect, + int stride, const struct v4l2_rect *c_rect, const struct vpdma_data_format *fmt, dma_addr_t dma_addr, enum vpdma_channel chan, int field, u32 flags, int frame_width, int frame_height, int start_h, int start_v); diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index f0156b7759e9..c47151495b6f 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -1085,7 +1085,8 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port) vpdma_set_max_size(ctx->dev->vpdma, VPDMA_MAX_SIZE1, MAX_W, MAX_H); - vpdma_add_out_dtd(&ctx->desc_list, q_data->width, &q_data->c_rect, + vpdma_add_out_dtd(&ctx->desc_list, q_data->width, + q_data->bytesperline[VPE_LUMA], &q_data->c_rect, vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1, MAX_OUT_HEIGHT_REG1, p_data->channel, flags); } @@ -1169,7 +1170,8 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) if (p_data->vb_part && fmt->fourcc == V4L2_PIX_FMT_NV12) frame_height /= 2; - vpdma_add_in_dtd(&ctx->desc_list, q_data->width, &q_data->c_rect, + vpdma_add_in_dtd(&ctx->desc_list, q_data->width, + q_data->bytesperline[VPE_LUMA], &q_data->c_rect, vpdma_fmt, dma_addr, p_data->channel, field, flags, frame_width, frame_height, 0, 0); } @@ -1595,6 +1597,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f, struct v4l2_plane_pix_format *plane_fmt; unsigned int w_align; int i, depth, depth_bytes, height; + unsigned int stride = 0; if (!fmt || !(fmt->types & type)) { vpe_err(ctx->dev, "Fourcc format (0x%08x) invalid.\n", @@ -1681,16 +1684,27 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f, plane_fmt = &pix->plane_fmt[i]; depth = fmt->vpdma_fmt[i]->depth; - if (i == VPE_LUMA) - plane_fmt->bytesperline = (pix->width * depth) >> 3; - else - plane_fmt->bytesperline = pix->width; + stride = (pix->width * fmt->vpdma_fmt[VPE_LUMA]->depth) >> 3; + if (stride > plane_fmt->bytesperline) + plane_fmt->bytesperline = stride; + + plane_fmt->bytesperline = ALIGN(plane_fmt->bytesperline, + VPDMA_STRIDE_ALIGN); - if (pix->num_planes == 1 && fmt->coplanar) - depth += fmt->vpdma_fmt[VPE_CHROMA]->depth; - plane_fmt->sizeimage = - (pix->height * pix->width * depth) >> 3; + if (i == VPE_LUMA) { + plane_fmt->sizeimage = pix->height * + plane_fmt->bytesperline; + if (pix->num_planes == 1 && fmt->coplanar) + plane_fmt->sizeimage += pix->height * + plane_fmt->bytesperline * + fmt->vpdma_fmt[VPE_CHROMA]->depth >> 3; + + } else { /* i == VIP_CHROMA */ + plane_fmt->sizeimage = (pix->height * + plane_fmt->bytesperline * + depth) >> 3; + } memset(plane_fmt->reserved, 0, sizeof(plane_fmt->reserved)); } diff --git a/drivers/media/platform/vimc/Kconfig b/drivers/media/platform/vimc/Kconfig new file mode 100644 index 000000000000..a18f6352c422 --- /dev/null +++ b/drivers/media/platform/vimc/Kconfig @@ -0,0 +1,14 @@ +config VIDEO_VIMC + tristate "Virtual Media Controller Driver (VIMC)" + depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + select VIDEOBUF2_VMALLOC + default n + ---help--- + Skeleton driver for Virtual Media Controller + + This driver can be compared to the vivid driver for emulating + a media node that exposes a complex media topology. The topology + is hard coded for now but is meant to be highly configurable in + the future. + + When in doubt, say N. diff --git a/drivers/media/platform/vimc/Makefile b/drivers/media/platform/vimc/Makefile new file mode 100644 index 000000000000..c45195e5e05c --- /dev/null +++ b/drivers/media/platform/vimc/Makefile @@ -0,0 +1,3 @@ +vimc-objs := vimc-core.o vimc-capture.o vimc-sensor.o + +obj-$(CONFIG_VIDEO_VIMC) += vimc.o diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c new file mode 100644 index 000000000000..9adb06d7e13d --- /dev/null +++ b/drivers/media/platform/vimc/vimc-capture.c @@ -0,0 +1,498 @@ +/* + * vimc-capture.c Virtual Media Controller Driver + * + * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-vmalloc.h> + +#include "vimc-capture.h" + +struct vimc_cap_device { + struct vimc_ent_device ved; + struct video_device vdev; + struct v4l2_pix_format format; + struct vb2_queue queue; + struct list_head buf_list; + /* + * NOTE: in a real driver, a spin lock must be used to access the + * queue because the frames are generated from a hardware interruption + * and the isr is not allowed to sleep. + * Even if it is not necessary a spinlock in the vimc driver, we + * use it here as a code reference + */ + spinlock_t qlock; + struct mutex lock; + u32 sequence; + struct media_pipeline pipe; +}; + +struct vimc_cap_buffer { + /* + * struct vb2_v4l2_buffer must be the first element + * the videobuf2 framework will allocate this struct based on + * buf_struct_size and use the first sizeof(struct vb2_buffer) bytes of + * memory as a vb2_buffer + */ + struct vb2_v4l2_buffer vb2; + struct list_head list; +}; + +static int vimc_cap_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vimc_cap_device *vcap = video_drvdata(file); + + strlcpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver)); + strlcpy(cap->card, KBUILD_MODNAME, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", vcap->vdev.v4l2_dev->name); + + return 0; +} + +static int vimc_cap_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct vimc_cap_device *vcap = video_drvdata(file); + + f->fmt.pix = vcap->format; + + return 0; +} + +static int vimc_cap_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct vimc_cap_device *vcap = video_drvdata(file); + + if (f->index > 0) + return -EINVAL; + + /* We only support one format for now */ + f->pixelformat = vcap->format.pixelformat; + + return 0; +} + +static const struct v4l2_file_operations vimc_cap_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .read = vb2_fop_read, + .poll = vb2_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = vb2_fop_mmap, +}; + +static const struct v4l2_ioctl_ops vimc_cap_ioctl_ops = { + .vidioc_querycap = vimc_cap_querycap, + + .vidioc_g_fmt_vid_cap = vimc_cap_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vimc_cap_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vimc_cap_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = vimc_cap_enum_fmt_vid_cap, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, +}; + +static void vimc_cap_return_all_buffers(struct vimc_cap_device *vcap, + enum vb2_buffer_state state) +{ + struct vimc_cap_buffer *vbuf, *node; + + spin_lock(&vcap->qlock); + + list_for_each_entry_safe(vbuf, node, &vcap->buf_list, list) { + list_del(&vbuf->list); + vb2_buffer_done(&vbuf->vb2.vb2_buf, state); + } + + spin_unlock(&vcap->qlock); +} + +static int vimc_cap_pipeline_s_stream(struct vimc_cap_device *vcap, int enable) +{ + struct v4l2_subdev *sd; + struct media_pad *pad; + int ret; + + /* Start the stream in the subdevice direct connected */ + pad = media_entity_remote_pad(&vcap->vdev.entity.pads[0]); + + /* + * if it is a raw node from vimc-core, there is nothing to activate + * TODO: remove this when there are no more raw nodes in the + * core and return error instead + */ + if (pad->entity->obj_type == MEDIA_ENTITY_TYPE_BASE) + return 0; + + sd = media_entity_to_v4l2_subdev(pad->entity); + ret = v4l2_subdev_call(sd, video, s_stream, enable); + if (ret && ret != -ENOIOCTLCMD) + return ret; + + return 0; +} + +static int vimc_cap_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct vimc_cap_device *vcap = vb2_get_drv_priv(vq); + struct media_entity *entity = &vcap->vdev.entity; + int ret; + + vcap->sequence = 0; + + /* Start the media pipeline */ + ret = media_pipeline_start(entity, &vcap->pipe); + if (ret) { + vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED); + return ret; + } + + /* Enable streaming from the pipe */ + ret = vimc_cap_pipeline_s_stream(vcap, 1); + if (ret) { + media_pipeline_stop(entity); + vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_QUEUED); + return ret; + } + + return 0; +} + +/* + * Stop the stream engine. Any remaining buffers in the stream queue are + * dequeued and passed on to the vb2 framework marked as STATE_ERROR. + */ +static void vimc_cap_stop_streaming(struct vb2_queue *vq) +{ + struct vimc_cap_device *vcap = vb2_get_drv_priv(vq); + + /* Disable streaming from the pipe */ + vimc_cap_pipeline_s_stream(vcap, 0); + + /* Stop the media pipeline */ + media_pipeline_stop(&vcap->vdev.entity); + + /* Release all active buffers */ + vimc_cap_return_all_buffers(vcap, VB2_BUF_STATE_ERROR); +} + +static void vimc_cap_buf_queue(struct vb2_buffer *vb2_buf) +{ + struct vimc_cap_device *vcap = vb2_get_drv_priv(vb2_buf->vb2_queue); + struct vimc_cap_buffer *buf = container_of(vb2_buf, + struct vimc_cap_buffer, + vb2.vb2_buf); + + spin_lock(&vcap->qlock); + list_add_tail(&buf->list, &vcap->buf_list); + spin_unlock(&vcap->qlock); +} + +static int vimc_cap_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct vimc_cap_device *vcap = vb2_get_drv_priv(vq); + + if (*nplanes) + return sizes[0] < vcap->format.sizeimage ? -EINVAL : 0; + /* We don't support multiplanes for now */ + *nplanes = 1; + sizes[0] = vcap->format.sizeimage; + + return 0; +} + +static int vimc_cap_buffer_prepare(struct vb2_buffer *vb) +{ + struct vimc_cap_device *vcap = vb2_get_drv_priv(vb->vb2_queue); + unsigned long size = vcap->format.sizeimage; + + if (vb2_plane_size(vb, 0) < size) { + dev_err(vcap->vdev.v4l2_dev->dev, + "%s: buffer too small (%lu < %lu)\n", + vcap->vdev.name, vb2_plane_size(vb, 0), size); + return -EINVAL; + } + return 0; +} + +static const struct vb2_ops vimc_cap_qops = { + .start_streaming = vimc_cap_start_streaming, + .stop_streaming = vimc_cap_stop_streaming, + .buf_queue = vimc_cap_buf_queue, + .queue_setup = vimc_cap_queue_setup, + .buf_prepare = vimc_cap_buffer_prepare, + /* + * Since q->lock is set we can use the standard + * vb2_ops_wait_prepare/finish helper functions. + */ + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +/* + * NOTE: this function is a copy of v4l2_subdev_link_validate_get_format + * maybe the v4l2 function should be public + */ +static int vimc_cap_v4l2_subdev_link_validate_get_format(struct media_pad *pad, + struct v4l2_subdev_format *fmt) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(pad->entity); + + fmt->which = V4L2_SUBDEV_FORMAT_ACTIVE; + fmt->pad = pad->index; + + return v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt); +} + +static int vimc_cap_link_validate(struct media_link *link) +{ + struct v4l2_subdev_format source_fmt; + const struct vimc_pix_map *vpix; + struct vimc_cap_device *vcap = container_of(link->sink->entity, + struct vimc_cap_device, + vdev.entity); + struct v4l2_pix_format *sink_fmt = &vcap->format; + int ret; + + /* + * if it is a raw node from vimc-core, ignore the link for now + * TODO: remove this when there are no more raw nodes in the + * core and return error instead + */ + if (link->source->entity->obj_type == MEDIA_ENTITY_TYPE_BASE) + return 0; + + /* Get the the format of the subdev */ + ret = vimc_cap_v4l2_subdev_link_validate_get_format(link->source, + &source_fmt); + if (ret) + return ret; + + dev_dbg(vcap->vdev.v4l2_dev->dev, + "%s: link validate formats src:%dx%d %d sink:%dx%d %d\n", + vcap->vdev.name, + source_fmt.format.width, source_fmt.format.height, + source_fmt.format.code, + sink_fmt->width, sink_fmt->height, + sink_fmt->pixelformat); + + /* The width, height and code must match. */ + vpix = vimc_pix_map_by_pixelformat(sink_fmt->pixelformat); + if (source_fmt.format.width != sink_fmt->width + || source_fmt.format.height != sink_fmt->height + || vpix->code != source_fmt.format.code) + return -EPIPE; + + /* + * The field order must match, or the sink field order must be NONE + * to support interlaced hardware connected to bridges that support + * progressive formats only. + */ + if (source_fmt.format.field != sink_fmt->field && + sink_fmt->field != V4L2_FIELD_NONE) + return -EPIPE; + + return 0; +} + +static const struct media_entity_operations vimc_cap_mops = { + .link_validate = vimc_cap_link_validate, +}; + +static void vimc_cap_destroy(struct vimc_ent_device *ved) +{ + struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device, + ved); + + vb2_queue_release(&vcap->queue); + media_entity_cleanup(ved->ent); + video_unregister_device(&vcap->vdev); + vimc_pads_cleanup(vcap->ved.pads); + kfree(vcap); +} + +static void vimc_cap_process_frame(struct vimc_ent_device *ved, + struct media_pad *sink, const void *frame) +{ + struct vimc_cap_device *vcap = container_of(ved, struct vimc_cap_device, + ved); + struct vimc_cap_buffer *vimc_buf; + void *vbuf; + + spin_lock(&vcap->qlock); + + /* Get the first entry of the list */ + vimc_buf = list_first_entry_or_null(&vcap->buf_list, + typeof(*vimc_buf), list); + if (!vimc_buf) { + spin_unlock(&vcap->qlock); + return; + } + + /* Remove this entry from the list */ + list_del(&vimc_buf->list); + + spin_unlock(&vcap->qlock); + + /* Fill the buffer */ + vimc_buf->vb2.vb2_buf.timestamp = ktime_get_ns(); + vimc_buf->vb2.sequence = vcap->sequence++; + vimc_buf->vb2.field = vcap->format.field; + + vbuf = vb2_plane_vaddr(&vimc_buf->vb2.vb2_buf, 0); + + memcpy(vbuf, frame, vcap->format.sizeimage); + + /* Set it as ready */ + vb2_set_plane_payload(&vimc_buf->vb2.vb2_buf, 0, + vcap->format.sizeimage); + vb2_buffer_done(&vimc_buf->vb2.vb2_buf, VB2_BUF_STATE_DONE); +} + +struct vimc_ent_device *vimc_cap_create(struct v4l2_device *v4l2_dev, + const char *const name, + u16 num_pads, + const unsigned long *pads_flag) +{ + const struct vimc_pix_map *vpix; + struct vimc_cap_device *vcap; + struct video_device *vdev; + struct vb2_queue *q; + int ret; + + /* + * Check entity configuration params + * NOTE: we only support a single sink pad + */ + if (!name || num_pads != 1 || !pads_flag || + !(pads_flag[0] & MEDIA_PAD_FL_SINK)) + return ERR_PTR(-EINVAL); + + /* Allocate the vimc_cap_device struct */ + vcap = kzalloc(sizeof(*vcap), GFP_KERNEL); + if (!vcap) + return ERR_PTR(-ENOMEM); + + /* Allocate the pads */ + vcap->ved.pads = vimc_pads_init(num_pads, pads_flag); + if (IS_ERR(vcap->ved.pads)) { + ret = PTR_ERR(vcap->ved.pads); + goto err_free_vcap; + } + + /* Initialize the media entity */ + vcap->vdev.entity.name = name; + vcap->vdev.entity.function = MEDIA_ENT_F_IO_V4L; + ret = media_entity_pads_init(&vcap->vdev.entity, + num_pads, vcap->ved.pads); + if (ret) + goto err_clean_pads; + + /* Initialize the lock */ + mutex_init(&vcap->lock); + + /* Initialize the vb2 queue */ + q = &vcap->queue; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_DMABUF; + q->drv_priv = vcap; + q->buf_struct_size = sizeof(struct vimc_cap_buffer); + q->ops = &vimc_cap_qops; + q->mem_ops = &vb2_vmalloc_memops; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->min_buffers_needed = 2; + q->lock = &vcap->lock; + + ret = vb2_queue_init(q); + if (ret) { + dev_err(vcap->vdev.v4l2_dev->dev, + "%s: vb2 queue init failed (err=%d)\n", + vcap->vdev.name, ret); + goto err_clean_m_ent; + } + + /* Initialize buffer list and its lock */ + INIT_LIST_HEAD(&vcap->buf_list); + spin_lock_init(&vcap->qlock); + + /* Set the frame format (this is hardcoded for now) */ + vcap->format.width = 640; + vcap->format.height = 480; + vcap->format.pixelformat = V4L2_PIX_FMT_RGB24; + vcap->format.field = V4L2_FIELD_NONE; + vcap->format.colorspace = V4L2_COLORSPACE_SRGB; + + vpix = vimc_pix_map_by_pixelformat(vcap->format.pixelformat); + + vcap->format.bytesperline = vcap->format.width * vpix->bpp; + vcap->format.sizeimage = vcap->format.bytesperline * + vcap->format.height; + + /* Fill the vimc_ent_device struct */ + vcap->ved.destroy = vimc_cap_destroy; + vcap->ved.ent = &vcap->vdev.entity; + vcap->ved.process_frame = vimc_cap_process_frame; + + /* Initialize the video_device struct */ + vdev = &vcap->vdev; + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + vdev->entity.ops = &vimc_cap_mops; + vdev->release = video_device_release_empty; + vdev->fops = &vimc_cap_fops; + vdev->ioctl_ops = &vimc_cap_ioctl_ops; + vdev->lock = &vcap->lock; + vdev->queue = q; + vdev->v4l2_dev = v4l2_dev; + vdev->vfl_dir = VFL_DIR_RX; + strlcpy(vdev->name, name, sizeof(vdev->name)); + video_set_drvdata(vdev, &vcap->ved); + + /* Register the video_device with the v4l2 and the media framework */ + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + if (ret) { + dev_err(vcap->vdev.v4l2_dev->dev, + "%s: video register failed (err=%d)\n", + vcap->vdev.name, ret); + goto err_release_queue; + } + + return &vcap->ved; + +err_release_queue: + vb2_queue_release(q); +err_clean_m_ent: + media_entity_cleanup(&vcap->vdev.entity); +err_clean_pads: + vimc_pads_cleanup(vcap->ved.pads); +err_free_vcap: + kfree(vcap); + + return ERR_PTR(ret); +} diff --git a/drivers/media/platform/vimc/vimc-capture.h b/drivers/media/platform/vimc/vimc-capture.h new file mode 100644 index 000000000000..581a813abdf1 --- /dev/null +++ b/drivers/media/platform/vimc/vimc-capture.h @@ -0,0 +1,28 @@ +/* + * vimc-capture.h Virtual Media Controller Driver + * + * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _VIMC_CAPTURE_H_ +#define _VIMC_CAPTURE_H_ + +#include "vimc-core.h" + +struct vimc_ent_device *vimc_cap_create(struct v4l2_device *v4l2_dev, + const char *const name, + u16 num_pads, + const unsigned long *pads_flag); + +#endif diff --git a/drivers/media/platform/vimc/vimc-core.c b/drivers/media/platform/vimc/vimc-core.c new file mode 100644 index 000000000000..bc107da8fbd5 --- /dev/null +++ b/drivers/media/platform/vimc/vimc-core.c @@ -0,0 +1,695 @@ +/* + * vimc-core.c Virtual Media Controller Driver + * + * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <media/media-device.h> +#include <media/v4l2-device.h> + +#include "vimc-capture.h" +#include "vimc-core.h" +#include "vimc-sensor.h" + +#define VIMC_PDEV_NAME "vimc" +#define VIMC_MDEV_MODEL_NAME "VIMC MDEV" + +#define VIMC_ENT_LINK(src, srcpad, sink, sinkpad, link_flags) { \ + .src_ent = src, \ + .src_pad = srcpad, \ + .sink_ent = sink, \ + .sink_pad = sinkpad, \ + .flags = link_flags, \ +} + +struct vimc_device { + /* + * The pipeline configuration + * (filled before calling vimc_device_register) + */ + const struct vimc_pipeline_config *pipe_cfg; + + /* The Associated media_device parent */ + struct media_device mdev; + + /* Internal v4l2 parent device*/ + struct v4l2_device v4l2_dev; + + /* Internal topology */ + struct vimc_ent_device **ved; +}; + +/** + * enum vimc_ent_node - Select the functionality of a node in the topology + * @VIMC_ENT_NODE_SENSOR: A node of type SENSOR simulates a camera sensor + * generating internal images in bayer format and + * propagating those images through the pipeline + * @VIMC_ENT_NODE_CAPTURE: A node of type CAPTURE is a v4l2 video_device + * that exposes the received image from the + * pipeline to the user space + * @VIMC_ENT_NODE_INPUT: A node of type INPUT is a v4l2 video_device that + * receives images from the user space and + * propagates them through the pipeline + * @VIMC_ENT_NODE_DEBAYER: A node type DEBAYER expects to receive a frame + * in bayer format converts it to RGB + * @VIMC_ENT_NODE_SCALER: A node of type SCALER scales the received image + * by a given multiplier + * + * This enum is used in the entity configuration struct to allow the definition + * of a custom topology specifying the role of each node on it. + */ +enum vimc_ent_node { + VIMC_ENT_NODE_SENSOR, + VIMC_ENT_NODE_CAPTURE, + VIMC_ENT_NODE_INPUT, + VIMC_ENT_NODE_DEBAYER, + VIMC_ENT_NODE_SCALER, +}; + +/* Structure which describes individual configuration for each entity */ +struct vimc_ent_config { + const char *name; + size_t pads_qty; + const unsigned long *pads_flag; + enum vimc_ent_node node; +}; + +/* Structure which describes links between entities */ +struct vimc_ent_link { + unsigned int src_ent; + u16 src_pad; + unsigned int sink_ent; + u16 sink_pad; + u32 flags; +}; + +/* Structure which describes the whole topology */ +struct vimc_pipeline_config { + const struct vimc_ent_config *ents; + size_t num_ents; + const struct vimc_ent_link *links; + size_t num_links; +}; + +/* -------------------------------------------------------------------------- + * Topology Configuration + */ + +static const struct vimc_ent_config ent_config[] = { + { + .name = "Sensor A", + .pads_qty = 1, + .pads_flag = (const unsigned long[]){MEDIA_PAD_FL_SOURCE}, + .node = VIMC_ENT_NODE_SENSOR, + }, + { + .name = "Sensor B", + .pads_qty = 1, + .pads_flag = (const unsigned long[]){MEDIA_PAD_FL_SOURCE}, + .node = VIMC_ENT_NODE_SENSOR, + }, + { + .name = "Debayer A", + .pads_qty = 2, + .pads_flag = (const unsigned long[]){MEDIA_PAD_FL_SINK, + MEDIA_PAD_FL_SOURCE}, + .node = VIMC_ENT_NODE_DEBAYER, + }, + { + .name = "Debayer B", + .pads_qty = 2, + .pads_flag = (const unsigned long[]){MEDIA_PAD_FL_SINK, + MEDIA_PAD_FL_SOURCE}, + .node = VIMC_ENT_NODE_DEBAYER, + }, + { + .name = "Raw Capture 0", + .pads_qty = 1, + .pads_flag = (const unsigned long[]){MEDIA_PAD_FL_SINK}, + .node = VIMC_ENT_NODE_CAPTURE, + }, + { + .name = "Raw Capture 1", + .pads_qty = 1, + .pads_flag = (const unsigned long[]){MEDIA_PAD_FL_SINK}, + .node = VIMC_ENT_NODE_CAPTURE, + }, + { + .name = "RGB/YUV Input", + .pads_qty = 1, + .pads_flag = (const unsigned long[]){MEDIA_PAD_FL_SOURCE}, + .node = VIMC_ENT_NODE_INPUT, + }, + { + .name = "Scaler", + .pads_qty = 2, + .pads_flag = (const unsigned long[]){MEDIA_PAD_FL_SINK, + MEDIA_PAD_FL_SOURCE}, + .node = VIMC_ENT_NODE_SCALER, + }, + { + .name = "RGB/YUV Capture", + .pads_qty = 1, + .pads_flag = (const unsigned long[]){MEDIA_PAD_FL_SINK}, + .node = VIMC_ENT_NODE_CAPTURE, + }, +}; + +static const struct vimc_ent_link ent_links[] = { + /* Link: Sensor A (Pad 0)->(Pad 0) Debayer A */ + VIMC_ENT_LINK(0, 0, 2, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE), + /* Link: Sensor A (Pad 0)->(Pad 0) Raw Capture 0 */ + VIMC_ENT_LINK(0, 0, 4, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE), + /* Link: Sensor B (Pad 0)->(Pad 0) Debayer B */ + VIMC_ENT_LINK(1, 0, 3, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE), + /* Link: Sensor B (Pad 0)->(Pad 0) Raw Capture 1 */ + VIMC_ENT_LINK(1, 0, 5, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE), + /* Link: Debayer A (Pad 1)->(Pad 0) Scaler */ + VIMC_ENT_LINK(2, 1, 7, 0, MEDIA_LNK_FL_ENABLED), + /* Link: Debayer B (Pad 1)->(Pad 0) Scaler */ + VIMC_ENT_LINK(3, 1, 7, 0, 0), + /* Link: RGB/YUV Input (Pad 0)->(Pad 0) Scaler */ + VIMC_ENT_LINK(6, 0, 7, 0, 0), + /* Link: Scaler (Pad 1)->(Pad 0) RGB/YUV Capture */ + VIMC_ENT_LINK(7, 1, 8, 0, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE), +}; + +static const struct vimc_pipeline_config pipe_cfg = { + .ents = ent_config, + .num_ents = ARRAY_SIZE(ent_config), + .links = ent_links, + .num_links = ARRAY_SIZE(ent_links) +}; + +/* -------------------------------------------------------------------------- */ + +static const struct vimc_pix_map vimc_pix_map_list[] = { + /* TODO: add all missing formats */ + + /* RGB formats */ + { + .code = MEDIA_BUS_FMT_BGR888_1X24, + .pixelformat = V4L2_PIX_FMT_BGR24, + .bpp = 3, + }, + { + .code = MEDIA_BUS_FMT_RGB888_1X24, + .pixelformat = V4L2_PIX_FMT_RGB24, + .bpp = 3, + }, + { + .code = MEDIA_BUS_FMT_ARGB8888_1X32, + .pixelformat = V4L2_PIX_FMT_ARGB32, + .bpp = 4, + }, + + /* Bayer formats */ + { + .code = MEDIA_BUS_FMT_SBGGR8_1X8, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SGBRG8_1X8, + .pixelformat = V4L2_PIX_FMT_SGBRG8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SGRBG8_1X8, + .pixelformat = V4L2_PIX_FMT_SGRBG8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SRGGB8_1X8, + .pixelformat = V4L2_PIX_FMT_SRGGB8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SBGGR10_1X10, + .pixelformat = V4L2_PIX_FMT_SBGGR10, + .bpp = 2, + }, + { + .code = MEDIA_BUS_FMT_SGBRG10_1X10, + .pixelformat = V4L2_PIX_FMT_SGBRG10, + .bpp = 2, + }, + { + .code = MEDIA_BUS_FMT_SGRBG10_1X10, + .pixelformat = V4L2_PIX_FMT_SGRBG10, + .bpp = 2, + }, + { + .code = MEDIA_BUS_FMT_SRGGB10_1X10, + .pixelformat = V4L2_PIX_FMT_SRGGB10, + .bpp = 2, + }, + + /* 10bit raw bayer a-law compressed to 8 bits */ + { + .code = MEDIA_BUS_FMT_SBGGR10_ALAW8_1X8, + .pixelformat = V4L2_PIX_FMT_SBGGR10ALAW8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SGBRG10_ALAW8_1X8, + .pixelformat = V4L2_PIX_FMT_SGBRG10ALAW8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SGRBG10_ALAW8_1X8, + .pixelformat = V4L2_PIX_FMT_SGRBG10ALAW8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SRGGB10_ALAW8_1X8, + .pixelformat = V4L2_PIX_FMT_SRGGB10ALAW8, + .bpp = 1, + }, + + /* 10bit raw bayer DPCM compressed to 8 bits */ + { + .code = MEDIA_BUS_FMT_SBGGR10_DPCM8_1X8, + .pixelformat = V4L2_PIX_FMT_SBGGR10DPCM8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SGBRG10_DPCM8_1X8, + .pixelformat = V4L2_PIX_FMT_SGBRG10DPCM8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8, + .pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SRGGB10_DPCM8_1X8, + .pixelformat = V4L2_PIX_FMT_SRGGB10DPCM8, + .bpp = 1, + }, + { + .code = MEDIA_BUS_FMT_SBGGR12_1X12, + .pixelformat = V4L2_PIX_FMT_SBGGR12, + .bpp = 2, + }, + { + .code = MEDIA_BUS_FMT_SGBRG12_1X12, + .pixelformat = V4L2_PIX_FMT_SGBRG12, + .bpp = 2, + }, + { + .code = MEDIA_BUS_FMT_SGRBG12_1X12, + .pixelformat = V4L2_PIX_FMT_SGRBG12, + .bpp = 2, + }, + { + .code = MEDIA_BUS_FMT_SRGGB12_1X12, + .pixelformat = V4L2_PIX_FMT_SRGGB12, + .bpp = 2, + }, +}; + +const struct vimc_pix_map *vimc_pix_map_by_code(u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(vimc_pix_map_list); i++) { + if (vimc_pix_map_list[i].code == code) + return &vimc_pix_map_list[i]; + } + return NULL; +} + +const struct vimc_pix_map *vimc_pix_map_by_pixelformat(u32 pixelformat) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(vimc_pix_map_list); i++) { + if (vimc_pix_map_list[i].pixelformat == pixelformat) + return &vimc_pix_map_list[i]; + } + return NULL; +} + +int vimc_propagate_frame(struct media_pad *src, const void *frame) +{ + struct media_link *link; + + if (!(src->flags & MEDIA_PAD_FL_SOURCE)) + return -EINVAL; + + /* Send this frame to all sink pads that are direct linked */ + list_for_each_entry(link, &src->entity->links, list) { + if (link->source == src && + (link->flags & MEDIA_LNK_FL_ENABLED)) { + struct vimc_ent_device *ved = NULL; + struct media_entity *entity = link->sink->entity; + + if (is_media_entity_v4l2_subdev(entity)) { + struct v4l2_subdev *sd = + container_of(entity, struct v4l2_subdev, + entity); + ved = v4l2_get_subdevdata(sd); + } else if (is_media_entity_v4l2_video_device(entity)) { + struct video_device *vdev = + container_of(entity, + struct video_device, + entity); + ved = video_get_drvdata(vdev); + } + if (ved && ved->process_frame) + ved->process_frame(ved, link->sink, frame); + } + } + + return 0; +} + +static void vimc_device_unregister(struct vimc_device *vimc) +{ + unsigned int i; + + media_device_unregister(&vimc->mdev); + /* Cleanup (only initialized) entities */ + for (i = 0; i < vimc->pipe_cfg->num_ents; i++) { + if (vimc->ved[i] && vimc->ved[i]->destroy) + vimc->ved[i]->destroy(vimc->ved[i]); + + vimc->ved[i] = NULL; + } + v4l2_device_unregister(&vimc->v4l2_dev); + media_device_cleanup(&vimc->mdev); +} + +/* Helper function to allocate and initialize pads */ +struct media_pad *vimc_pads_init(u16 num_pads, const unsigned long *pads_flag) +{ + struct media_pad *pads; + unsigned int i; + + /* Allocate memory for the pads */ + pads = kcalloc(num_pads, sizeof(*pads), GFP_KERNEL); + if (!pads) + return ERR_PTR(-ENOMEM); + + /* Initialize the pads */ + for (i = 0; i < num_pads; i++) { + pads[i].index = i; + pads[i].flags = pads_flag[i]; + } + + return pads; +} + +/* + * TODO: remove this function when all the + * entities specific code are implemented + */ +static void vimc_raw_destroy(struct vimc_ent_device *ved) +{ + media_device_unregister_entity(ved->ent); + + media_entity_cleanup(ved->ent); + + vimc_pads_cleanup(ved->pads); + + kfree(ved->ent); + + kfree(ved); +} + +/* + * TODO: remove this function when all the + * entities specific code are implemented + */ +static struct vimc_ent_device *vimc_raw_create(struct v4l2_device *v4l2_dev, + const char *const name, + u16 num_pads, + const unsigned long *pads_flag) +{ + struct vimc_ent_device *ved; + int ret; + + /* Allocate the main ved struct */ + ved = kzalloc(sizeof(*ved), GFP_KERNEL); + if (!ved) + return ERR_PTR(-ENOMEM); + + /* Allocate the media entity */ + ved->ent = kzalloc(sizeof(*ved->ent), GFP_KERNEL); + if (!ved->ent) { + ret = -ENOMEM; + goto err_free_ved; + } + + /* Allocate the pads */ + ved->pads = vimc_pads_init(num_pads, pads_flag); + if (IS_ERR(ved->pads)) { + ret = PTR_ERR(ved->pads); + goto err_free_ent; + } + + /* Initialize the media entity */ + ved->ent->name = name; + ved->ent->function = MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN; + ret = media_entity_pads_init(ved->ent, num_pads, ved->pads); + if (ret) + goto err_cleanup_pads; + + /* Register the media entity */ + ret = media_device_register_entity(v4l2_dev->mdev, ved->ent); + if (ret) + goto err_cleanup_entity; + + /* Fill out the destroy function and return */ + ved->destroy = vimc_raw_destroy; + return ved; + +err_cleanup_entity: + media_entity_cleanup(ved->ent); +err_cleanup_pads: + vimc_pads_cleanup(ved->pads); +err_free_ent: + kfree(ved->ent); +err_free_ved: + kfree(ved); + + return ERR_PTR(ret); +} + +static int vimc_device_register(struct vimc_device *vimc) +{ + unsigned int i; + int ret; + + /* Allocate memory for the vimc_ent_devices pointers */ + vimc->ved = devm_kcalloc(vimc->mdev.dev, vimc->pipe_cfg->num_ents, + sizeof(*vimc->ved), GFP_KERNEL); + if (!vimc->ved) + return -ENOMEM; + + /* Link the media device within the v4l2_device */ + vimc->v4l2_dev.mdev = &vimc->mdev; + + /* Register the v4l2 struct */ + ret = v4l2_device_register(vimc->mdev.dev, &vimc->v4l2_dev); + if (ret) { + dev_err(vimc->mdev.dev, + "v4l2 device register failed (err=%d)\n", ret); + return ret; + } + + /* Initialize entities */ + for (i = 0; i < vimc->pipe_cfg->num_ents; i++) { + struct vimc_ent_device *(*create_func)(struct v4l2_device *, + const char *const, + u16, + const unsigned long *); + + /* Register the specific node */ + switch (vimc->pipe_cfg->ents[i].node) { + case VIMC_ENT_NODE_SENSOR: + create_func = vimc_sen_create; + break; + + case VIMC_ENT_NODE_CAPTURE: + create_func = vimc_cap_create; + break; + + /* TODO: Instantiate the specific topology node */ + case VIMC_ENT_NODE_INPUT: + case VIMC_ENT_NODE_DEBAYER: + case VIMC_ENT_NODE_SCALER: + default: + /* + * TODO: remove this when all the entities specific + * code are implemented + */ + create_func = vimc_raw_create; + break; + } + + vimc->ved[i] = create_func(&vimc->v4l2_dev, + vimc->pipe_cfg->ents[i].name, + vimc->pipe_cfg->ents[i].pads_qty, + vimc->pipe_cfg->ents[i].pads_flag); + if (IS_ERR(vimc->ved[i])) { + ret = PTR_ERR(vimc->ved[i]); + vimc->ved[i] = NULL; + goto err; + } + } + + /* Initialize the links between entities */ + for (i = 0; i < vimc->pipe_cfg->num_links; i++) { + const struct vimc_ent_link *link = &vimc->pipe_cfg->links[i]; + + ret = media_create_pad_link(vimc->ved[link->src_ent]->ent, + link->src_pad, + vimc->ved[link->sink_ent]->ent, + link->sink_pad, + link->flags); + if (ret) + goto err; + } + + /* Register the media device */ + ret = media_device_register(&vimc->mdev); + if (ret) { + dev_err(vimc->mdev.dev, + "media device register failed (err=%d)\n", ret); + return ret; + } + + /* Expose all subdev's nodes*/ + ret = v4l2_device_register_subdev_nodes(&vimc->v4l2_dev); + if (ret) { + dev_err(vimc->mdev.dev, + "vimc subdev nodes registration failed (err=%d)\n", + ret); + goto err; + } + + return 0; + +err: + /* Destroy the so far created topology */ + vimc_device_unregister(vimc); + + return ret; +} + +static int vimc_probe(struct platform_device *pdev) +{ + struct vimc_device *vimc; + int ret; + + /* Prepare the vimc topology structure */ + + /* Allocate memory for the vimc structure */ + vimc = kzalloc(sizeof(*vimc), GFP_KERNEL); + if (!vimc) + return -ENOMEM; + + /* Set the pipeline configuration struct */ + vimc->pipe_cfg = &pipe_cfg; + + /* Initialize media device */ + strlcpy(vimc->mdev.model, VIMC_MDEV_MODEL_NAME, + sizeof(vimc->mdev.model)); + vimc->mdev.dev = &pdev->dev; + media_device_init(&vimc->mdev); + + /* Create vimc topology */ + ret = vimc_device_register(vimc); + if (ret) { + dev_err(vimc->mdev.dev, + "vimc device registration failed (err=%d)\n", ret); + kfree(vimc); + return ret; + } + + /* Link the topology object with the platform device object */ + platform_set_drvdata(pdev, vimc); + + return 0; +} + +static int vimc_remove(struct platform_device *pdev) +{ + struct vimc_device *vimc = platform_get_drvdata(pdev); + + /* Destroy all the topology */ + vimc_device_unregister(vimc); + kfree(vimc); + + return 0; +} + +static void vimc_dev_release(struct device *dev) +{ +} + +static struct platform_device vimc_pdev = { + .name = VIMC_PDEV_NAME, + .dev.release = vimc_dev_release, +}; + +static struct platform_driver vimc_pdrv = { + .probe = vimc_probe, + .remove = vimc_remove, + .driver = { + .name = VIMC_PDEV_NAME, + }, +}; + +static int __init vimc_init(void) +{ + int ret; + + ret = platform_device_register(&vimc_pdev); + if (ret) { + dev_err(&vimc_pdev.dev, + "platform device registration failed (err=%d)\n", ret); + return ret; + } + + ret = platform_driver_register(&vimc_pdrv); + if (ret) { + dev_err(&vimc_pdev.dev, + "platform driver registration failed (err=%d)\n", ret); + + platform_device_unregister(&vimc_pdev); + } + + return ret; +} + +static void __exit vimc_exit(void) +{ + platform_driver_unregister(&vimc_pdrv); + + platform_device_unregister(&vimc_pdev); +} + +module_init(vimc_init); +module_exit(vimc_exit); + +MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC)"); +MODULE_AUTHOR("Helen Fornazier <helen.fornazier@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/vimc/vimc-core.h b/drivers/media/platform/vimc/vimc-core.h new file mode 100644 index 000000000000..4525d23211ca --- /dev/null +++ b/drivers/media/platform/vimc/vimc-core.h @@ -0,0 +1,112 @@ +/* + * vimc-core.h Virtual Media Controller Driver + * + * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _VIMC_CORE_H_ +#define _VIMC_CORE_H_ + +#include <linux/slab.h> +#include <media/v4l2-device.h> + +/** + * struct vimc_pix_map - maps media bus code with v4l2 pixel format + * + * @code: media bus format code defined by MEDIA_BUS_FMT_* macros + * @bbp: number of bytes each pixel occupies + * @pixelformat: pixel format devined by V4L2_PIX_FMT_* macros + * + * Struct which matches the MEDIA_BUS_FMT_* codes with the corresponding + * V4L2_PIX_FMT_* fourcc pixelformat and its bytes per pixel (bpp) + */ +struct vimc_pix_map { + unsigned int code; + unsigned int bpp; + u32 pixelformat; +}; + +/** + * struct vimc_ent_device - core struct that represents a node in the topology + * + * @ent: the pointer to struct media_entity for the node + * @pads: the list of pads of the node + * @destroy: callback to destroy the node + * @process_frame: callback send a frame to that node + * + * Each node of the topology must create a vimc_ent_device struct. Depending on + * the node it will be of an instance of v4l2_subdev or video_device struct + * where both contains a struct media_entity. + * Those structures should embedded the vimc_ent_device struct through + * v4l2_set_subdevdata() and video_set_drvdata() respectivaly, allowing the + * vimc_ent_device struct to be retrieved from the corresponding struct + * media_entity + */ +struct vimc_ent_device { + struct media_entity *ent; + struct media_pad *pads; + void (*destroy)(struct vimc_ent_device *); + void (*process_frame)(struct vimc_ent_device *ved, + struct media_pad *sink, const void *frame); +}; + +/** + * vimc_propagate_frame - propagate a frame through the topology + * + * @src: the source pad where the frame is being originated + * @frame: the frame to be propagated + * + * This function will call the process_frame callback from the vimc_ent_device + * struct of the nodes directly connected to the @src pad + */ +int vimc_propagate_frame(struct media_pad *src, const void *frame); + +/** + * vimc_pads_init - initialize pads + * + * @num_pads: number of pads to initialize + * @pads_flags: flags to use in each pad + * + * Helper functions to allocate/initialize pads + */ +struct media_pad *vimc_pads_init(u16 num_pads, + const unsigned long *pads_flag); + +/** + * vimc_pads_cleanup - free pads + * + * @pads: pointer to the pads + * + * Helper function to free the pads initialized with vimc_pads_init + */ +static inline void vimc_pads_cleanup(struct media_pad *pads) +{ + kfree(pads); +} + +/** + * vimc_pix_map_by_code - get vimc_pix_map struct by media bus code + * + * @code: media bus format code defined by MEDIA_BUS_FMT_* macros + */ +const struct vimc_pix_map *vimc_pix_map_by_code(u32 code); + +/** + * vimc_pix_map_by_pixelformat - get vimc_pix_map struct by v4l2 pixel format + * + * @pixelformat: pixel format devined by V4L2_PIX_FMT_* macros + */ +const struct vimc_pix_map *vimc_pix_map_by_pixelformat(u32 pixelformat); + +#endif diff --git a/drivers/media/platform/vimc/vimc-sensor.c b/drivers/media/platform/vimc/vimc-sensor.c new file mode 100644 index 000000000000..591f6a4f8bd3 --- /dev/null +++ b/drivers/media/platform/vimc/vimc-sensor.c @@ -0,0 +1,276 @@ +/* + * vimc-sensor.c Virtual Media Controller Driver + * + * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/freezer.h> +#include <linux/kthread.h> +#include <linux/v4l2-mediabus.h> +#include <linux/vmalloc.h> +#include <media/v4l2-subdev.h> + +#include "vimc-sensor.h" + +struct vimc_sen_device { + struct vimc_ent_device ved; + struct v4l2_subdev sd; + struct task_struct *kthread_sen; + u8 *frame; + /* The active format */ + struct v4l2_mbus_framefmt mbus_format; + int frame_size; +}; + +static int vimc_sen_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct vimc_sen_device *vsen = + container_of(sd, struct vimc_sen_device, sd); + + /* TODO: Add support for other codes */ + if (code->index) + return -EINVAL; + + code->code = vsen->mbus_format.code; + + return 0; +} + +static int vimc_sen_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct vimc_sen_device *vsen = + container_of(sd, struct vimc_sen_device, sd); + + /* TODO: Add support to other formats */ + if (fse->index) + return -EINVAL; + + /* TODO: Add support for other codes */ + if (fse->code != vsen->mbus_format.code) + return -EINVAL; + + fse->min_width = vsen->mbus_format.width; + fse->max_width = vsen->mbus_format.width; + fse->min_height = vsen->mbus_format.height; + fse->max_height = vsen->mbus_format.height; + + return 0; +} + +static int vimc_sen_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct vimc_sen_device *vsen = + container_of(sd, struct vimc_sen_device, sd); + + format->format = vsen->mbus_format; + + return 0; +} + +static const struct v4l2_subdev_pad_ops vimc_sen_pad_ops = { + .enum_mbus_code = vimc_sen_enum_mbus_code, + .enum_frame_size = vimc_sen_enum_frame_size, + .get_fmt = vimc_sen_get_fmt, + /* TODO: Add support to other formats */ + .set_fmt = vimc_sen_get_fmt, +}; + +/* media operations */ +static const struct media_entity_operations vimc_sen_mops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static int vimc_thread_sen(void *data) +{ + struct vimc_sen_device *vsen = data; + unsigned int i; + + set_freezable(); + set_current_state(TASK_UNINTERRUPTIBLE); + + for (;;) { + try_to_freeze(); + if (kthread_should_stop()) + break; + + memset(vsen->frame, 100, vsen->frame_size); + + /* Send the frame to all source pads */ + for (i = 0; i < vsen->sd.entity.num_pads; i++) + vimc_propagate_frame(&vsen->sd.entity.pads[i], + vsen->frame); + + /* 60 frames per second */ + schedule_timeout(HZ/60); + } + + return 0; +} + +static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct vimc_sen_device *vsen = + container_of(sd, struct vimc_sen_device, sd); + int ret; + + if (enable) { + const struct vimc_pix_map *vpix; + + if (vsen->kthread_sen) + return -EINVAL; + + /* Calculate the frame size */ + vpix = vimc_pix_map_by_code(vsen->mbus_format.code); + vsen->frame_size = vsen->mbus_format.width * vpix->bpp * + vsen->mbus_format.height; + + /* + * Allocate the frame buffer. Use vmalloc to be able to + * allocate a large amount of memory + */ + vsen->frame = vmalloc(vsen->frame_size); + if (!vsen->frame) + return -ENOMEM; + + /* Initialize the image generator thread */ + vsen->kthread_sen = kthread_run(vimc_thread_sen, vsen, "%s-sen", + vsen->sd.v4l2_dev->name); + if (IS_ERR(vsen->kthread_sen)) { + dev_err(vsen->sd.v4l2_dev->dev, + "%s: kernel_thread() failed\n", vsen->sd.name); + vfree(vsen->frame); + vsen->frame = NULL; + return PTR_ERR(vsen->kthread_sen); + } + } else { + if (!vsen->kthread_sen) + return -EINVAL; + + /* Stop image generator */ + ret = kthread_stop(vsen->kthread_sen); + vsen->kthread_sen = NULL; + + vfree(vsen->frame); + vsen->frame = NULL; + return ret; + } + + return 0; +} + +struct v4l2_subdev_video_ops vimc_sen_video_ops = { + .s_stream = vimc_sen_s_stream, +}; + +static const struct v4l2_subdev_ops vimc_sen_ops = { + .pad = &vimc_sen_pad_ops, + .video = &vimc_sen_video_ops, +}; + +static void vimc_sen_destroy(struct vimc_ent_device *ved) +{ + struct vimc_sen_device *vsen = + container_of(ved, struct vimc_sen_device, ved); + + v4l2_device_unregister_subdev(&vsen->sd); + media_entity_cleanup(ved->ent); + kfree(vsen); +} + +struct vimc_ent_device *vimc_sen_create(struct v4l2_device *v4l2_dev, + const char *const name, + u16 num_pads, + const unsigned long *pads_flag) +{ + struct vimc_sen_device *vsen; + unsigned int i; + int ret; + + /* NOTE: a sensor node may be created with more then one pad */ + if (!name || !num_pads || !pads_flag) + return ERR_PTR(-EINVAL); + + /* check if all pads are sources */ + for (i = 0; i < num_pads; i++) + if (!(pads_flag[i] & MEDIA_PAD_FL_SOURCE)) + return ERR_PTR(-EINVAL); + + /* Allocate the vsen struct */ + vsen = kzalloc(sizeof(*vsen), GFP_KERNEL); + if (!vsen) + return ERR_PTR(-ENOMEM); + + /* Allocate the pads */ + vsen->ved.pads = vimc_pads_init(num_pads, pads_flag); + if (IS_ERR(vsen->ved.pads)) { + ret = PTR_ERR(vsen->ved.pads); + goto err_free_vsen; + } + + /* Fill the vimc_ent_device struct */ + vsen->ved.destroy = vimc_sen_destroy; + vsen->ved.ent = &vsen->sd.entity; + + /* Initialize the subdev */ + v4l2_subdev_init(&vsen->sd, &vimc_sen_ops); + vsen->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + vsen->sd.entity.ops = &vimc_sen_mops; + vsen->sd.owner = THIS_MODULE; + strlcpy(vsen->sd.name, name, sizeof(vsen->sd.name)); + v4l2_set_subdevdata(&vsen->sd, &vsen->ved); + + /* Expose this subdev to user space */ + vsen->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE; + + /* Initialize the media entity */ + ret = media_entity_pads_init(&vsen->sd.entity, + num_pads, vsen->ved.pads); + if (ret) + goto err_clean_pads; + + /* Set the active frame format (this is hardcoded for now) */ + vsen->mbus_format.width = 640; + vsen->mbus_format.height = 480; + vsen->mbus_format.code = MEDIA_BUS_FMT_RGB888_1X24; + vsen->mbus_format.field = V4L2_FIELD_NONE; + vsen->mbus_format.colorspace = V4L2_COLORSPACE_SRGB; + vsen->mbus_format.quantization = V4L2_QUANTIZATION_FULL_RANGE; + vsen->mbus_format.xfer_func = V4L2_XFER_FUNC_SRGB; + + /* Register the subdev with the v4l2 and the media framework */ + ret = v4l2_device_register_subdev(v4l2_dev, &vsen->sd); + if (ret) { + dev_err(vsen->sd.v4l2_dev->dev, + "%s: subdev register failed (err=%d)\n", + vsen->sd.name, ret); + goto err_clean_m_ent; + } + + return &vsen->ved; + +err_clean_m_ent: + media_entity_cleanup(&vsen->sd.entity); +err_clean_pads: + vimc_pads_cleanup(vsen->ved.pads); +err_free_vsen: + kfree(vsen); + + return ERR_PTR(ret); +} diff --git a/drivers/media/platform/vimc/vimc-sensor.h b/drivers/media/platform/vimc/vimc-sensor.h new file mode 100644 index 000000000000..505310e8aeb7 --- /dev/null +++ b/drivers/media/platform/vimc/vimc-sensor.h @@ -0,0 +1,28 @@ +/* + * vimc-sensor.h Virtual Media Controller Driver + * + * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _VIMC_SENSOR_H_ +#define _VIMC_SENSOR_H_ + +#include "vimc-core.h" + +struct vimc_ent_device *vimc_sen_create(struct v4l2_device *v4l2_dev, + const char *const name, + u16 num_pads, + const unsigned long *pads_flag); + +#endif diff --git a/drivers/media/platform/vivid/Kconfig b/drivers/media/platform/vivid/Kconfig index db0dd19d227a..b36ac19dc6e4 100644 --- a/drivers/media/platform/vivid/Kconfig +++ b/drivers/media/platform/vivid/Kconfig @@ -1,13 +1,14 @@ config VIDEO_VIVID tristate "Virtual Video Test Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FB + depends on HAS_DMA select FONT_SUPPORT select FONT_8x16 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select MEDIA_CEC_EDID select VIDEOBUF2_VMALLOC + select VIDEOBUF2_DMA_CONTIG select VIDEO_V4L2_TPG default n ---help--- @@ -25,7 +26,7 @@ config VIDEO_VIVID config VIDEO_VIVID_CEC bool "Enable CEC emulation support" - depends on VIDEO_VIVID && MEDIA_CEC_SUPPORT + depends on VIDEO_VIVID && CEC_CORE ---help--- When selected the vivid module will emulate the optional HDMI CEC feature. diff --git a/drivers/media/platform/vivid/vivid-cec.c b/drivers/media/platform/vivid/vivid-cec.c index cb4933592a3c..653f4099f737 100644 --- a/drivers/media/platform/vivid/vivid-cec.c +++ b/drivers/media/platform/vivid/vivid-cec.c @@ -135,7 +135,7 @@ static int vivid_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr) static int vivid_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg) { - struct vivid_dev *dev = adap->priv; + struct vivid_dev *dev = cec_get_drvdata(adap); struct vivid_cec_work *cw = kzalloc(sizeof(*cw), GFP_KERNEL); long delta_jiffies = 0; @@ -166,7 +166,7 @@ static int vivid_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, static int vivid_received(struct cec_adapter *adap, struct cec_msg *msg) { - struct vivid_dev *dev = adap->priv; + struct vivid_dev *dev = cec_get_drvdata(adap); struct cec_msg reply; u8 dest = cec_msg_destination(msg); u8 disp_ctl; diff --git a/drivers/media/platform/vivid/vivid-core.c b/drivers/media/platform/vivid/vivid-core.c index 51e37812ec98..ef344b9a48af 100644 --- a/drivers/media/platform/vivid/vivid-core.c +++ b/drivers/media/platform/vivid/vivid-core.c @@ -30,6 +30,7 @@ #include <linux/videodev2.h> #include <linux/v4l2-dv-timings.h> #include <media/videobuf2-vmalloc.h> +#include <media/videobuf2-dma-contig.h> #include <media/v4l2-dv-timings.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-fh.h> @@ -151,6 +152,12 @@ static bool no_error_inj; module_param(no_error_inj, bool, 0444); MODULE_PARM_DESC(no_error_inj, " if set disable the error injecting controls"); +static unsigned int allocators[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0 }; +module_param_array(allocators, uint, NULL, 0444); +MODULE_PARM_DESC(allocators, " memory allocator selection, default is 0.\n" + "\t\t 0 == vmalloc\n" + "\t\t 1 == dma-contig"); + static struct vivid_dev *vivid_devs[VIVID_MAX_DEVS]; const struct v4l2_rect vivid_min_rect = { @@ -636,6 +643,10 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) { static const struct v4l2_dv_timings def_dv_timings = V4L2_DV_BT_CEA_1280X720P60; + static const struct vb2_mem_ops * const vivid_mem_ops[2] = { + &vb2_vmalloc_memops, + &vb2_dma_contig_memops, + }; unsigned in_type_counter[4] = { 0, 0, 0, 0 }; unsigned out_type_counter[4] = { 0, 0, 0, 0 }; int ccs_cap = ccs_cap_mode[inst]; @@ -646,6 +657,7 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) struct video_device *vfd; struct vb2_queue *q; unsigned node_type = node_types[inst]; + unsigned int allocator = allocators[inst]; v4l2_std_id tvnorms_cap = 0, tvnorms_out = 0; int ret; int i; @@ -1039,6 +1051,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) goto unreg_dev; } + if (allocator == 1) + dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + else if (allocator >= ARRAY_SIZE(vivid_mem_ops)) + allocator = 0; + /* start creating the vb2 queues */ if (dev->has_vid_cap) { /* initialize vid_cap queue */ @@ -1049,10 +1066,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) q->drv_priv = dev; q->buf_struct_size = sizeof(struct vivid_buffer); q->ops = &vivid_vid_cap_qops; - q->mem_ops = &vb2_vmalloc_memops; + q->mem_ops = vivid_mem_ops[allocator]; q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->min_buffers_needed = 2; q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ret = vb2_queue_init(q); if (ret) @@ -1068,10 +1086,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) q->drv_priv = dev; q->buf_struct_size = sizeof(struct vivid_buffer); q->ops = &vivid_vid_out_qops; - q->mem_ops = &vb2_vmalloc_memops; + q->mem_ops = vivid_mem_ops[allocator]; q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->min_buffers_needed = 2; q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ret = vb2_queue_init(q); if (ret) @@ -1087,10 +1106,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) q->drv_priv = dev; q->buf_struct_size = sizeof(struct vivid_buffer); q->ops = &vivid_vbi_cap_qops; - q->mem_ops = &vb2_vmalloc_memops; + q->mem_ops = vivid_mem_ops[allocator]; q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->min_buffers_needed = 2; q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ret = vb2_queue_init(q); if (ret) @@ -1106,10 +1126,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) q->drv_priv = dev; q->buf_struct_size = sizeof(struct vivid_buffer); q->ops = &vivid_vbi_out_qops; - q->mem_ops = &vb2_vmalloc_memops; + q->mem_ops = vivid_mem_ops[allocator]; q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->min_buffers_needed = 2; q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ret = vb2_queue_init(q); if (ret) @@ -1124,10 +1145,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) q->drv_priv = dev; q->buf_struct_size = sizeof(struct vivid_buffer); q->ops = &vivid_sdr_cap_qops; - q->mem_ops = &vb2_vmalloc_memops; + q->mem_ops = vivid_mem_ops[allocator]; q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->min_buffers_needed = 8; q->lock = &dev->mutex; + q->dev = dev->v4l2_dev.dev; ret = vb2_queue_init(q); if (ret) diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c index a18e6fec219b..01419455e545 100644 --- a/drivers/media/platform/vivid/vivid-vid-cap.c +++ b/drivers/media/platform/vivid/vivid-vid-cap.c @@ -616,7 +616,7 @@ int vivid_try_fmt_vid_cap(struct file *file, void *priv, /* This driver supports custom bytesperline values */ mp->num_planes = fmt->buffers; - for (p = 0; p < mp->num_planes; p++) { + for (p = 0; p < fmt->buffers; p++) { /* Calculate the minimum supported bytesperline value */ bytesperline = (mp->width * fmt->bit_depth[p]) >> 3; /* Calculate the maximum supported bytesperline value */ @@ -626,10 +626,17 @@ int vivid_try_fmt_vid_cap(struct file *file, void *priv, pfmt[p].bytesperline = max_bpl; if (pfmt[p].bytesperline < bytesperline) pfmt[p].bytesperline = bytesperline; - pfmt[p].sizeimage = tpg_calc_line_width(&dev->tpg, p, pfmt[p].bytesperline) * - mp->height + fmt->data_offset[p]; + + pfmt[p].sizeimage = (pfmt[p].bytesperline * mp->height) / + fmt->vdownsampling[p] + fmt->data_offset[p]; + memset(pfmt[p].reserved, 0, sizeof(pfmt[p].reserved)); } + for (p = fmt->buffers; p < fmt->planes; p++) + pfmt[0].sizeimage += (pfmt[0].bytesperline * mp->height * + (fmt->bit_depth[p] / fmt->vdownsampling[p])) / + (fmt->bit_depth[0] / fmt->vdownsampling[0]); + mp->colorspace = vivid_colorspace_cap(dev); if (fmt->color_enc == TGP_COLOR_ENC_HSV) mp->hsv_enc = vivid_hsv_enc_cap(dev); diff --git a/drivers/media/platform/vivid/vivid-vid-common.c b/drivers/media/platform/vivid/vivid-vid-common.c index 5fc010f6ce67..f0f423c7ca41 100644 --- a/drivers/media/platform/vivid/vivid-vid-common.c +++ b/drivers/media/platform/vivid/vivid-vid-common.c @@ -858,7 +858,7 @@ int vidioc_g_edid(struct file *file, void *_fh, return -EINVAL; if (edid->start_block + edid->blocks > dev->edid_blocks) edid->blocks = dev->edid_blocks - edid->start_block; - memcpy(edid->edid, dev->edid, edid->blocks * 128); - cec_set_edid_phys_addr(edid->edid, edid->blocks * 128, adap->phys_addr); + cec_set_edid_phys_addr(dev->edid, dev->edid_blocks * 128, adap->phys_addr); + memcpy(edid->edid, dev->edid + edid->start_block * 128, edid->blocks * 128); return 0; } diff --git a/drivers/media/platform/vivid/vivid-vid-out.c b/drivers/media/platform/vivid/vivid-vid-out.c index 7ba52ee98371..0b1b6218ede8 100644 --- a/drivers/media/platform/vivid/vivid-vid-out.c +++ b/drivers/media/platform/vivid/vivid-vid-out.c @@ -390,22 +390,28 @@ int vivid_try_fmt_vid_out(struct file *file, void *priv, /* This driver supports custom bytesperline values */ - /* Calculate the minimum supported bytesperline value */ - bytesperline = (mp->width * fmt->bit_depth[0]) >> 3; - /* Calculate the maximum supported bytesperline value */ - max_bpl = (MAX_ZOOM * MAX_WIDTH * fmt->bit_depth[0]) >> 3; mp->num_planes = fmt->buffers; - for (p = 0; p < mp->num_planes; p++) { + for (p = 0; p < fmt->buffers; p++) { + /* Calculate the minimum supported bytesperline value */ + bytesperline = (mp->width * fmt->bit_depth[p]) >> 3; + /* Calculate the maximum supported bytesperline value */ + max_bpl = (MAX_ZOOM * MAX_WIDTH * fmt->bit_depth[p]) >> 3; + if (pfmt[p].bytesperline > max_bpl) pfmt[p].bytesperline = max_bpl; if (pfmt[p].bytesperline < bytesperline) pfmt[p].bytesperline = bytesperline; - pfmt[p].sizeimage = pfmt[p].bytesperline * mp->height; + + pfmt[p].sizeimage = (pfmt[p].bytesperline * mp->height) / + fmt->vdownsampling[p]; + memset(pfmt[p].reserved, 0, sizeof(pfmt[p].reserved)); } for (p = fmt->buffers; p < fmt->planes; p++) - pfmt[0].sizeimage += (pfmt[0].bytesperline * fmt->bit_depth[p]) / - (fmt->bit_depth[0] * fmt->vdownsampling[p]); + pfmt[0].sizeimage += (pfmt[0].bytesperline * mp->height * + (fmt->bit_depth[p] / fmt->vdownsampling[p])) / + (fmt->bit_depth[0] / fmt->vdownsampling[0]); + mp->xfer_func = V4L2_XFER_FUNC_DEFAULT; mp->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; mp->quantization = V4L2_QUANTIZATION_DEFAULT; @@ -1172,14 +1178,12 @@ int vidioc_subscribe_event(struct v4l2_fh *fh, const struct v4l2_event_subscription *sub) { switch (sub->type) { - case V4L2_EVENT_CTRL: - return v4l2_ctrl_subscribe_event(fh, sub); case V4L2_EVENT_SOURCE_CHANGE: if (fh->vdev->vfl_dir == VFL_DIR_RX) return v4l2_src_change_event_subscribe(fh, sub); break; default: - break; + return v4l2_ctrl_subscribe_event(fh, sub); } return -EINVAL; } diff --git a/drivers/media/platform/vsp1/Makefile b/drivers/media/platform/vsp1/Makefile index 1328e1bd2143..a33afc385a48 100644 --- a/drivers/media/platform/vsp1/Makefile +++ b/drivers/media/platform/vsp1/Makefile @@ -3,6 +3,7 @@ vsp1-y += vsp1_dl.o vsp1_drm.o vsp1_video.o vsp1-y += vsp1_rpf.o vsp1_rwpf.o vsp1_wpf.o vsp1-y += vsp1_clu.o vsp1_hsit.o vsp1_lut.o vsp1-y += vsp1_bru.o vsp1_sru.o vsp1_uds.o +vsp1-y += vsp1_hgo.o vsp1_hgt.o vsp1_histo.o vsp1-y += vsp1_lif.o obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1.o diff --git a/drivers/media/platform/vsp1/vsp1.h b/drivers/media/platform/vsp1/vsp1.h index b23fa879a9aa..85387a64179a 100644 --- a/drivers/media/platform/vsp1/vsp1.h +++ b/drivers/media/platform/vsp1/vsp1.h @@ -32,6 +32,8 @@ struct vsp1_entity; struct vsp1_platform_data; struct vsp1_bru; struct vsp1_clu; +struct vsp1_hgo; +struct vsp1_hgt; struct vsp1_hsit; struct vsp1_lif; struct vsp1_lut; @@ -50,6 +52,8 @@ struct vsp1_uds; #define VSP1_HAS_CLU (1 << 4) #define VSP1_HAS_WPF_VFLIP (1 << 5) #define VSP1_HAS_WPF_HFLIP (1 << 6) +#define VSP1_HAS_HGO (1 << 7) +#define VSP1_HAS_HGT (1 << 8) struct vsp1_device_info { u32 version; @@ -73,6 +77,8 @@ struct vsp1_device { struct vsp1_bru *bru; struct vsp1_clu *clu; + struct vsp1_hgo *hgo; + struct vsp1_hgt *hgt; struct vsp1_hsit *hsi; struct vsp1_hsit *hst; struct vsp1_lif *lif; diff --git a/drivers/media/platform/vsp1/vsp1_bru.c b/drivers/media/platform/vsp1/vsp1_bru.c index ee8355c28f94..85362c5ef57a 100644 --- a/drivers/media/platform/vsp1/vsp1_bru.c +++ b/drivers/media/platform/vsp1/vsp1_bru.c @@ -251,7 +251,8 @@ static int bru_set_selection(struct v4l2_subdev *subdev, sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1); sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1); - /* Scaling isn't supported, the compose rectangle size must be identical + /* + * Scaling isn't supported, the compose rectangle size must be identical * to the sink format size. */ format = vsp1_entity_get_pad_format(&bru->entity, config, sel->pad); @@ -300,13 +301,15 @@ static void bru_configure(struct vsp1_entity *entity, format = vsp1_entity_get_pad_format(&bru->entity, bru->entity.config, bru->entity.source_pad); - /* The hardware is extremely flexible but we have no userspace API to + /* + * The hardware is extremely flexible but we have no userspace API to * expose all the parameters, nor is it clear whether we would have use * cases for all the supported modes. Let's just harcode the parameters * to sane default values for now. */ - /* Disable dithering and enable color data normalization unless the + /* + * Disable dithering and enable color data normalization unless the * format at the pipeline output is premultiplied. */ flags = pipe->output ? pipe->output->format.flags : 0; @@ -314,7 +317,8 @@ static void bru_configure(struct vsp1_entity *entity, flags & V4L2_PIX_FMT_FLAG_PREMUL_ALPHA ? 0 : VI6_BRU_INCTRL_NRM); - /* Set the background position to cover the whole output image and + /* + * Set the background position to cover the whole output image and * configure its color. */ vsp1_bru_write(bru, dl, VI6_BRU_VIRRPF_SIZE, @@ -325,7 +329,8 @@ static void bru_configure(struct vsp1_entity *entity, vsp1_bru_write(bru, dl, VI6_BRU_VIRRPF_COL, bru->bgcolor | (0xff << VI6_BRU_VIRRPF_COL_A_SHIFT)); - /* Route BRU input 1 as SRC input to the ROP unit and configure the ROP + /* + * Route BRU input 1 as SRC input to the ROP unit and configure the ROP * unit with a NOP operation to make BRU input 1 available as the * Blend/ROP unit B SRC input. */ @@ -337,7 +342,8 @@ static void bru_configure(struct vsp1_entity *entity, bool premultiplied = false; u32 ctrl = 0; - /* Configure all Blend/ROP units corresponding to an enabled BRU + /* + * Configure all Blend/ROP units corresponding to an enabled BRU * input for alpha blending. Blend/ROP units corresponding to * disabled BRU inputs are used in ROP NOP mode to ignore the * SRC input. @@ -352,13 +358,15 @@ static void bru_configure(struct vsp1_entity *entity, | VI6_BRU_CTRL_AROP(VI6_ROP_NOP); } - /* Select the virtual RPF as the Blend/ROP unit A DST input to + /* + * Select the virtual RPF as the Blend/ROP unit A DST input to * serve as a background color. */ if (i == 0) ctrl |= VI6_BRU_CTRL_DSTSEL_VRPF; - /* Route BRU inputs 0 to 3 as SRC inputs to Blend/ROP units A to + /* + * Route BRU inputs 0 to 3 as SRC inputs to Blend/ROP units A to * D in that order. The Blend/ROP unit B SRC is hardwired to the * ROP unit output, the corresponding register bits must be set * to 0. @@ -368,7 +376,8 @@ static void bru_configure(struct vsp1_entity *entity, vsp1_bru_write(bru, dl, VI6_BRU_CTRL(i), ctrl); - /* Harcode the blending formula to + /* + * Harcode the blending formula to * * DSTc = DSTc * (1 - SRCa) + SRCc * SRCa * DSTa = DSTa * (1 - SRCa) + SRCa diff --git a/drivers/media/platform/vsp1/vsp1_dl.c b/drivers/media/platform/vsp1/vsp1_dl.c index ad545aff4e35..7d8f37772b56 100644 --- a/drivers/media/platform/vsp1/vsp1_dl.c +++ b/drivers/media/platform/vsp1/vsp1_dl.c @@ -240,7 +240,8 @@ static struct vsp1_dl_list *vsp1_dl_list_alloc(struct vsp1_dl_manager *dlm) INIT_LIST_HEAD(&dl->fragments); dl->dlm = dlm; - /* Initialize the display list body and allocate DMA memory for the body + /* + * Initialize the display list body and allocate DMA memory for the body * and the optional header. Both are allocated together to avoid memory * fragmentation, with the header located right after the body in * memory. @@ -511,7 +512,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl) goto done; } - /* Once the UPD bit has been set the hardware can start processing the + /* + * Once the UPD bit has been set the hardware can start processing the * display list at any time and we can't touch the address and size * registers. In that case mark the update as pending, it will be * queued up to the hardware by the frame end interrupt handler. @@ -523,7 +525,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl) goto done; } - /* Program the hardware with the display list body address and size. + /* + * Program the hardware with the display list body address and size. * The UPD bit will be cleared by the device when the display list is * processed. */ @@ -547,7 +550,8 @@ void vsp1_dlm_irq_display_start(struct vsp1_dl_manager *dlm) { spin_lock(&dlm->lock); - /* The display start interrupt signals the end of the display list + /* + * The display start interrupt signals the end of the display list * processing by the device. The active display list, if any, won't be * accessed anymore and can be reused. */ @@ -566,14 +570,16 @@ void vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm) __vsp1_dl_list_put(dlm->active); dlm->active = NULL; - /* Header mode is used for mem-to-mem pipelines only. We don't need to + /* + * Header mode is used for mem-to-mem pipelines only. We don't need to * perform any operation as there can't be any new display list queued * in that case. */ if (dlm->mode == VSP1_DL_MODE_HEADER) goto done; - /* The UPD bit set indicates that the commit operation raced with the + /* + * The UPD bit set indicates that the commit operation raced with the * interrupt and occurred after the frame end event and UPD clear but * before interrupt processing. The hardware hasn't taken the update * into account yet, we'll thus skip one frame and retry. @@ -581,7 +587,8 @@ void vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm) if (vsp1_read(vsp1, VI6_DL_BODY_SIZE) & VI6_DL_BODY_SIZE_UPD) goto done; - /* The device starts processing the queued display list right after the + /* + * The device starts processing the queued display list right after the * frame end interrupt. The display list thus becomes active. */ if (dlm->queued) { @@ -589,7 +596,8 @@ void vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm) dlm->queued = NULL; } - /* Now that the UPD bit has been cleared we can queue the next display + /* + * Now that the UPD bit has been cleared we can queue the next display * list to the hardware if one has been prepared. */ if (dlm->pending) { @@ -615,7 +623,8 @@ void vsp1_dlm_setup(struct vsp1_device *vsp1) | VI6_DL_CTRL_DC2 | VI6_DL_CTRL_DC1 | VI6_DL_CTRL_DC0 | VI6_DL_CTRL_DLE; - /* The DRM pipeline operates with display lists in Continuous Frame + /* + * The DRM pipeline operates with display lists in Continuous Frame * Mode, all other pipelines use manual start. */ if (vsp1->drm) diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c index b4c0f10fc3b0..9d235e830f5a 100644 --- a/drivers/media/platform/vsp1/vsp1_drm.c +++ b/drivers/media/platform/vsp1/vsp1_drm.c @@ -78,7 +78,8 @@ int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg) int ret; if (!cfg) { - /* NULL configuration means the CRTC is being disabled, stop + /* + * NULL configuration means the CRTC is being disabled, stop * the pipeline and turn the light off. */ ret = vsp1_pipeline_stop(pipe); @@ -106,7 +107,8 @@ int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg) dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n", __func__, cfg->width, cfg->height); - /* Configure the format at the BRU sinks and propagate it through the + /* + * Configure the format at the BRU sinks and propagate it through the * pipeline. */ memset(&format, 0, sizeof(format)); @@ -175,7 +177,8 @@ int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg) __func__, format.format.width, format.format.height, format.format.code); - /* Verify that the format at the output of the pipeline matches the + /* + * Verify that the format at the output of the pipeline matches the * requested frame size and media bus code. */ if (format.format.width != cfg->width || @@ -185,7 +188,8 @@ int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg) return -EPIPE; } - /* Mark the pipeline as streaming and enable the VSP1. This will store + /* + * Mark the pipeline as streaming and enable the VSP1. This will store * the pipeline pointer in all entities, which the s_stream handlers * will need. We don't start the entities themselves right at this point * as there's no plane configured yet, so we can't start processing @@ -219,9 +223,6 @@ void vsp1_du_atomic_begin(struct device *dev) struct vsp1_pipeline *pipe = &vsp1->drm->pipe; vsp1->drm->num_inputs = pipe->num_inputs; - - /* Prepare the display list. */ - pipe->dl = vsp1_dl_list_get(pipe->output->dlm); } EXPORT_SYMBOL_GPL(vsp1_du_atomic_begin); @@ -320,7 +321,8 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1, const struct v4l2_rect *crop; int ret; - /* Configure the format on the RPF sink pad and propagate it up to the + /* + * Configure the format on the RPF sink pad and propagate it up to the * BRU sink pad. */ crop = &vsp1->drm->inputs[rpf->entity.index].crop; @@ -359,7 +361,8 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1, __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height, rpf->entity.index); - /* RPF source, hardcode the format to ARGB8888 to turn on format + /* + * RPF source, hardcode the format to ARGB8888 to turn on format * conversion if needed. */ format.pad = RWPF_PAD_SOURCE; @@ -425,10 +428,14 @@ void vsp1_du_atomic_flush(struct device *dev) struct vsp1_pipeline *pipe = &vsp1->drm->pipe; struct vsp1_rwpf *inputs[VSP1_MAX_RPF] = { NULL, }; struct vsp1_entity *entity; + struct vsp1_dl_list *dl; unsigned long flags; unsigned int i; int ret; + /* Prepare the display list. */ + dl = vsp1_dl_list_get(pipe->output->dlm); + /* Count the number of enabled inputs and sort them by Z-order. */ pipe->num_inputs = 0; @@ -483,26 +490,25 @@ void vsp1_du_atomic_flush(struct device *dev) struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev); if (!pipe->inputs[rpf->entity.index]) { - vsp1_dl_list_write(pipe->dl, entity->route->reg, + vsp1_dl_list_write(dl, entity->route->reg, VI6_DPR_NODE_UNUSED); continue; } } - vsp1_entity_route_setup(entity, pipe->dl); + vsp1_entity_route_setup(entity, pipe, dl); if (entity->ops->configure) { - entity->ops->configure(entity, pipe, pipe->dl, + entity->ops->configure(entity, pipe, dl, VSP1_ENTITY_PARAMS_INIT); - entity->ops->configure(entity, pipe, pipe->dl, + entity->ops->configure(entity, pipe, dl, VSP1_ENTITY_PARAMS_RUNTIME); - entity->ops->configure(entity, pipe, pipe->dl, + entity->ops->configure(entity, pipe, dl, VSP1_ENTITY_PARAMS_PARTITION); } } - vsp1_dl_list_commit(pipe->dl); - pipe->dl = NULL; + vsp1_dl_list_commit(dl); /* Start or stop the pipeline if needed. */ if (!vsp1->drm->num_inputs && pipe->num_inputs) { @@ -528,7 +534,8 @@ int vsp1_drm_create_links(struct vsp1_device *vsp1) unsigned int i; int ret; - /* VSPD instances require a BRU to perform composition and a LIF to + /* + * VSPD instances require a BRU to perform composition and a LIF to * output to the DU. */ if (!vsp1->bru || !vsp1->lif) @@ -595,6 +602,7 @@ int vsp1_drm_init(struct vsp1_device *vsp1) pipe->bru = &vsp1->bru->entity; pipe->lif = &vsp1->lif->entity; pipe->output = vsp1->wpf[0]; + pipe->output->pipe = pipe; return 0; } diff --git a/drivers/media/platform/vsp1/vsp1_drm.h b/drivers/media/platform/vsp1/vsp1_drm.h index 9e28ab9254ba..c8d2f88fc483 100644 --- a/drivers/media/platform/vsp1/vsp1_drm.h +++ b/drivers/media/platform/vsp1/vsp1_drm.h @@ -21,7 +21,7 @@ * vsp1_drm - State for the API exposed to the DRM driver * @pipe: the VSP1 pipeline used for display * @num_inputs: number of active pipeline inputs at the beginning of an update - * @planes: source crop rectangle, destination compose rectangle and z-order + * @inputs: source crop rectangle, destination compose rectangle and z-order * position for every input */ struct vsp1_drm { diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c index aa237b48ad55..048446af5ae7 100644 --- a/drivers/media/platform/vsp1/vsp1_drv.c +++ b/drivers/media/platform/vsp1/vsp1_drv.c @@ -30,6 +30,8 @@ #include "vsp1_clu.h" #include "vsp1_dl.h" #include "vsp1_drm.h" +#include "vsp1_hgo.h" +#include "vsp1_hgt.h" #include "vsp1_hsit.h" #include "vsp1_lif.h" #include "vsp1_lut.h" @@ -105,7 +107,9 @@ static int vsp1_create_sink_links(struct vsp1_device *vsp1, if (source->type == sink->type) continue; - if (source->type == VSP1_ENTITY_LIF || + if (source->type == VSP1_ENTITY_HGO || + source->type == VSP1_ENTITY_HGT || + source->type == VSP1_ENTITY_LIF || source->type == VSP1_ENTITY_WPF) continue; @@ -148,6 +152,26 @@ static int vsp1_uapi_create_links(struct vsp1_device *vsp1) return ret; } + if (vsp1->hgo) { + ret = media_create_pad_link(&vsp1->hgo->histo.entity.subdev.entity, + HISTO_PAD_SOURCE, + &vsp1->hgo->histo.video.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret < 0) + return ret; + } + + if (vsp1->hgt) { + ret = media_create_pad_link(&vsp1->hgt->histo.entity.subdev.entity, + HISTO_PAD_SOURCE, + &vsp1->hgt->histo.video.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret < 0) + return ret; + } + if (vsp1->lif) { ret = media_create_pad_link(&vsp1->wpf[0]->entity.subdev.entity, RWPF_PAD_SOURCE, @@ -170,7 +194,8 @@ static int vsp1_uapi_create_links(struct vsp1_device *vsp1) } for (i = 0; i < vsp1->info->wpf_count; ++i) { - /* Connect the video device to the WPF. All connections are + /* + * Connect the video device to the WPF. All connections are * immutable. */ struct vsp1_rwpf *wpf = vsp1->wpf[i]; @@ -227,7 +252,8 @@ static int vsp1_create_entities(struct vsp1_device *vsp1) media_device_init(mdev); vsp1->media_ops.link_setup = vsp1_entity_link_setup; - /* Don't perform link validation when the userspace API is disabled as + /* + * Don't perform link validation when the userspace API is disabled as * the pipeline is configured internally by the driver in that case, and * its configuration can thus be trusted. */ @@ -279,7 +305,30 @@ static int vsp1_create_entities(struct vsp1_device *vsp1) list_add_tail(&vsp1->hst->entity.list_dev, &vsp1->entities); - /* The LIF is only supported when used in conjunction with the DU, in + if (vsp1->info->features & VSP1_HAS_HGO && vsp1->info->uapi) { + vsp1->hgo = vsp1_hgo_create(vsp1); + if (IS_ERR(vsp1->hgo)) { + ret = PTR_ERR(vsp1->hgo); + goto done; + } + + list_add_tail(&vsp1->hgo->histo.entity.list_dev, + &vsp1->entities); + } + + if (vsp1->info->features & VSP1_HAS_HGT && vsp1->info->uapi) { + vsp1->hgt = vsp1_hgt_create(vsp1); + if (IS_ERR(vsp1->hgt)) { + ret = PTR_ERR(vsp1->hgt); + goto done; + } + + list_add_tail(&vsp1->hgt->histo.entity.list_dev, + &vsp1->entities); + } + + /* + * The LIF is only supported when used in conjunction with the DU, in * which case the userspace API is disabled. If the userspace API is * enabled skip the LIF, even when present. */ @@ -391,7 +440,8 @@ static int vsp1_create_entities(struct vsp1_device *vsp1) if (ret < 0) goto done; - /* Register subdev nodes if the userspace API is enabled or initialize + /* + * Register subdev nodes if the userspace API is enabled or initialize * the DRM pipeline otherwise. */ if (vsp1->info->uapi) { @@ -562,8 +612,9 @@ static const struct vsp1_device_info vsp1_device_infos[] = { .version = VI6_IP_VERSION_MODEL_VSPS_H2, .model = "VSP1-S", .gen = 2, - .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_LUT - | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP, + .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO + | VSP1_HAS_HGT | VSP1_HAS_LUT | VSP1_HAS_SRU + | VSP1_HAS_WPF_VFLIP, .rpf_count = 5, .uds_count = 3, .wpf_count = 4, @@ -583,7 +634,8 @@ static const struct vsp1_device_info vsp1_device_infos[] = { .version = VI6_IP_VERSION_MODEL_VSPD_GEN2, .model = "VSP1-D", .gen = 2, - .features = VSP1_HAS_BRU | VSP1_HAS_LIF | VSP1_HAS_LUT, + .features = VSP1_HAS_BRU | VSP1_HAS_HGO | VSP1_HAS_LIF + | VSP1_HAS_LUT, .rpf_count = 4, .uds_count = 1, .wpf_count = 1, @@ -593,8 +645,9 @@ static const struct vsp1_device_info vsp1_device_infos[] = { .version = VI6_IP_VERSION_MODEL_VSPS_M2, .model = "VSP1-S", .gen = 2, - .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_LUT - | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP, + .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO + | VSP1_HAS_HGT | VSP1_HAS_LUT | VSP1_HAS_SRU + | VSP1_HAS_WPF_VFLIP, .rpf_count = 5, .uds_count = 1, .wpf_count = 4, @@ -626,8 +679,9 @@ static const struct vsp1_device_info vsp1_device_infos[] = { .version = VI6_IP_VERSION_MODEL_VSPI_GEN3, .model = "VSP2-I", .gen = 3, - .features = VSP1_HAS_CLU | VSP1_HAS_LUT | VSP1_HAS_SRU - | VSP1_HAS_WPF_HFLIP | VSP1_HAS_WPF_VFLIP, + .features = VSP1_HAS_CLU | VSP1_HAS_HGO | VSP1_HAS_HGT + | VSP1_HAS_LUT | VSP1_HAS_SRU | VSP1_HAS_WPF_HFLIP + | VSP1_HAS_WPF_VFLIP, .rpf_count = 1, .uds_count = 1, .wpf_count = 1, @@ -645,8 +699,8 @@ static const struct vsp1_device_info vsp1_device_infos[] = { .version = VI6_IP_VERSION_MODEL_VSPBC_GEN3, .model = "VSP2-BC", .gen = 3, - .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_LUT - | VSP1_HAS_WPF_VFLIP, + .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO + | VSP1_HAS_LUT | VSP1_HAS_WPF_VFLIP, .rpf_count = 5, .wpf_count = 1, .num_bru_inputs = 5, diff --git a/drivers/media/platform/vsp1/vsp1_entity.c b/drivers/media/platform/vsp1/vsp1_entity.c index da673495c222..4bdb3b141611 100644 --- a/drivers/media/platform/vsp1/vsp1_entity.c +++ b/drivers/media/platform/vsp1/vsp1_entity.c @@ -21,6 +21,8 @@ #include "vsp1.h" #include "vsp1_dl.h" #include "vsp1_entity.h" +#include "vsp1_pipe.h" +#include "vsp1_rwpf.h" static inline struct vsp1_entity * media_entity_to_vsp1_entity(struct media_entity *entity) @@ -28,11 +30,42 @@ media_entity_to_vsp1_entity(struct media_entity *entity) return container_of(entity, struct vsp1_entity, subdev.entity); } -void vsp1_entity_route_setup(struct vsp1_entity *source, +void vsp1_entity_route_setup(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, struct vsp1_dl_list *dl) { + struct vsp1_entity *source; struct vsp1_entity *sink; + if (entity->type == VSP1_ENTITY_HGO) { + u32 smppt; + + /* + * The HGO is a special case, its routing is configured on the + * sink pad. + */ + source = media_entity_to_vsp1_entity(entity->sources[0]); + smppt = (pipe->output->entity.index << VI6_DPR_SMPPT_TGW_SHIFT) + | (source->route->output << VI6_DPR_SMPPT_PT_SHIFT); + + vsp1_dl_list_write(dl, VI6_DPR_HGO_SMPPT, smppt); + return; + } else if (entity->type == VSP1_ENTITY_HGT) { + u32 smppt; + + /* + * The HGT is a special case, its routing is configured on the + * sink pad. + */ + source = media_entity_to_vsp1_entity(entity->sources[0]); + smppt = (pipe->output->entity.index << VI6_DPR_SMPPT_TGW_SHIFT) + | (source->route->output << VI6_DPR_SMPPT_PT_SHIFT); + + vsp1_dl_list_write(dl, VI6_DPR_HGT_SMPPT, smppt); + return; + } + + source = entity; if (source->route->reg == 0) return; @@ -199,7 +232,8 @@ int vsp1_subdev_enum_mbus_code(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *config; struct v4l2_mbus_framefmt *format; - /* The entity can't perform format conversion, the sink format + /* + * The entity can't perform format conversion, the sink format * is always identical to the source format. */ if (code->index) @@ -263,7 +297,8 @@ int vsp1_subdev_enum_frame_size(struct v4l2_subdev *subdev, fse->min_height = min_height; fse->max_height = max_height; } else { - /* The size on the source pad are fixed and always identical to + /* + * The size on the source pad are fixed and always identical to * the size on the sink pad. */ fse->min_width = format->width; @@ -281,25 +316,32 @@ done: * Media Operations */ -int vsp1_entity_link_setup(struct media_entity *entity, - const struct media_pad *local, - const struct media_pad *remote, u32 flags) +static int vsp1_entity_link_setup_source(const struct media_pad *source_pad, + const struct media_pad *sink_pad, + u32 flags) { struct vsp1_entity *source; - if (!(local->flags & MEDIA_PAD_FL_SOURCE)) - return 0; - - source = media_entity_to_vsp1_entity(local->entity); + source = media_entity_to_vsp1_entity(source_pad->entity); if (!source->route) return 0; if (flags & MEDIA_LNK_FL_ENABLED) { - if (source->sink) - return -EBUSY; - source->sink = remote->entity; - source->sink_pad = remote->index; + struct vsp1_entity *sink + = media_entity_to_vsp1_entity(sink_pad->entity); + + /* + * Fan-out is limited to one for the normal data path plus + * optional HGO and HGT. We ignore the HGO and HGT here. + */ + if (sink->type != VSP1_ENTITY_HGO && + sink->type != VSP1_ENTITY_HGT) { + if (source->sink) + return -EBUSY; + source->sink = sink_pad->entity; + source->sink_pad = sink_pad->index; + } } else { source->sink = NULL; source->sink_pad = 0; @@ -308,6 +350,85 @@ int vsp1_entity_link_setup(struct media_entity *entity, return 0; } +static int vsp1_entity_link_setup_sink(const struct media_pad *source_pad, + const struct media_pad *sink_pad, + u32 flags) +{ + struct vsp1_entity *sink; + + sink = media_entity_to_vsp1_entity(sink_pad->entity); + + if (flags & MEDIA_LNK_FL_ENABLED) { + /* Fan-in is limited to one. */ + if (sink->sources[sink_pad->index]) + return -EBUSY; + + sink->sources[sink_pad->index] = source_pad->entity; + } else { + sink->sources[sink_pad->index] = NULL; + } + + return 0; +} + +int vsp1_entity_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + if (local->flags & MEDIA_PAD_FL_SOURCE) + return vsp1_entity_link_setup_source(local, remote, flags); + else + return vsp1_entity_link_setup_sink(remote, local, flags); +} + +/** + * vsp1_entity_remote_pad - Find the pad at the remote end of a link + * @pad: Pad at the local end of the link + * + * Search for a remote pad connected to the given pad by iterating over all + * links originating or terminating at that pad until an enabled link is found. + * + * Our link setup implementation guarantees that the output fan-out will not be + * higher than one for the data pipelines, except for the links to the HGO and + * HGT that can be enabled in addition to a regular data link. When traversing + * outgoing links this function ignores HGO and HGT entities and should thus be + * used in place of the generic media_entity_remote_pad() function to traverse + * data pipelines. + * + * Return a pointer to the pad at the remote end of the first found enabled + * link, or NULL if no enabled link has been found. + */ +struct media_pad *vsp1_entity_remote_pad(struct media_pad *pad) +{ + struct media_link *link; + + list_for_each_entry(link, &pad->entity->links, list) { + struct vsp1_entity *entity; + + if (!(link->flags & MEDIA_LNK_FL_ENABLED)) + continue; + + /* If we're the sink the source will never be an HGO or HGT. */ + if (link->sink == pad) + return link->source; + + if (link->source != pad) + continue; + + /* If the sink isn't a subdevice it can't be an HGO or HGT. */ + if (!is_media_entity_v4l2_subdev(link->sink->entity)) + return link->sink; + + entity = media_entity_to_vsp1_entity(link->sink->entity); + if (entity->type != VSP1_ENTITY_HGO && + entity->type != VSP1_ENTITY_HGT) + return link->sink; + } + + return NULL; + +} + /* ----------------------------------------------------------------------------- * Initialization */ @@ -334,6 +455,8 @@ static const struct vsp1_route vsp1_routes[] = { VI6_DPR_NODE_BRU_IN(2), VI6_DPR_NODE_BRU_IN(3), VI6_DPR_NODE_BRU_IN(4) }, VI6_DPR_NODE_BRU_OUT }, VSP1_ENTITY_ROUTE(CLU), + { VSP1_ENTITY_HGO, 0, 0, { 0, }, 0 }, + { VSP1_ENTITY_HGT, 0, 0, { 0, }, 0 }, VSP1_ENTITY_ROUTE(HSI), VSP1_ENTITY_ROUTE(HST), { VSP1_ENTITY_LIF, 0, 0, { VI6_DPR_NODE_LIF, }, VI6_DPR_NODE_LIF }, @@ -386,7 +509,14 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity, for (i = 0; i < num_pads - 1; ++i) entity->pads[i].flags = MEDIA_PAD_FL_SINK; - entity->pads[num_pads - 1].flags = MEDIA_PAD_FL_SOURCE; + entity->sources = devm_kcalloc(vsp1->dev, max(num_pads - 1, 1U), + sizeof(*entity->sources), GFP_KERNEL); + if (entity->sources == NULL) + return -ENOMEM; + + /* Single-pad entities only have a sink. */ + entity->pads[num_pads - 1].flags = num_pads > 1 ? MEDIA_PAD_FL_SOURCE + : MEDIA_PAD_FL_SINK; /* Initialize the media entity. */ ret = media_entity_pads_init(&entity->subdev.entity, num_pads, @@ -407,7 +537,8 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity, vsp1_entity_init_cfg(subdev, NULL); - /* Allocate the pad configuration to store formats and selection + /* + * Allocate the pad configuration to store formats and selection * rectangles. */ entity->config = v4l2_subdev_alloc_pad_config(&entity->subdev); diff --git a/drivers/media/platform/vsp1/vsp1_entity.h b/drivers/media/platform/vsp1/vsp1_entity.h index 901146f807b9..c169a060b6d2 100644 --- a/drivers/media/platform/vsp1/vsp1_entity.h +++ b/drivers/media/platform/vsp1/vsp1_entity.h @@ -25,6 +25,8 @@ struct vsp1_pipeline; enum vsp1_entity_type { VSP1_ENTITY_BRU, VSP1_ENTITY_CLU, + VSP1_ENTITY_HGO, + VSP1_ENTITY_HGT, VSP1_ENTITY_HSI, VSP1_ENTITY_HST, VSP1_ENTITY_LIF, @@ -102,6 +104,7 @@ struct vsp1_entity { struct media_pad *pads; unsigned int source_pad; + struct media_entity **sources; struct media_entity *sink; unsigned int sink_pad; @@ -142,9 +145,12 @@ vsp1_entity_get_pad_selection(struct vsp1_entity *entity, int vsp1_entity_init_cfg(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg); -void vsp1_entity_route_setup(struct vsp1_entity *source, +void vsp1_entity_route_setup(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, struct vsp1_dl_list *dl); +struct media_pad *vsp1_entity_remote_pad(struct media_pad *pad); + int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *fmt); diff --git a/drivers/media/platform/vsp1/vsp1_hgo.c b/drivers/media/platform/vsp1/vsp1_hgo.c new file mode 100644 index 000000000000..50309c053b78 --- /dev/null +++ b/drivers/media/platform/vsp1/vsp1_hgo.c @@ -0,0 +1,230 @@ +/* + * vsp1_hgo.c -- R-Car VSP1 Histogram Generator 1D + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> +#include <media/videobuf2-vmalloc.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_hgo.h" + +#define HGO_DATA_SIZE ((2 + 256) * 4) + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline u32 vsp1_hgo_read(struct vsp1_hgo *hgo, u32 reg) +{ + return vsp1_read(hgo->histo.entity.vsp1, reg); +} + +static inline void vsp1_hgo_write(struct vsp1_hgo *hgo, struct vsp1_dl_list *dl, + u32 reg, u32 data) +{ + vsp1_dl_list_write(dl, reg, data); +} + +/* ----------------------------------------------------------------------------- + * Frame End Handler + */ + +void vsp1_hgo_frame_end(struct vsp1_entity *entity) +{ + struct vsp1_hgo *hgo = to_hgo(&entity->subdev); + struct vsp1_histogram_buffer *buf; + unsigned int i; + size_t size; + u32 *data; + + buf = vsp1_histogram_buffer_get(&hgo->histo); + if (!buf) + return; + + data = buf->addr; + + if (hgo->num_bins == 256) { + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_MAXMIN); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_SUM); + + for (i = 0; i < 256; ++i) { + vsp1_write(hgo->histo.entity.vsp1, + VI6_HGO_EXT_HIST_ADDR, i); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_EXT_HIST_DATA); + } + + size = (2 + 256) * sizeof(u32); + } else if (hgo->max_rgb) { + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_MAXMIN); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_SUM); + + for (i = 0; i < 64; ++i) + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_HISTO(i)); + + size = (2 + 64) * sizeof(u32); + } else { + *data++ = vsp1_hgo_read(hgo, VI6_HGO_R_MAXMIN); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_MAXMIN); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_B_MAXMIN); + + *data++ = vsp1_hgo_read(hgo, VI6_HGO_R_SUM); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_SUM); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_B_SUM); + + for (i = 0; i < 64; ++i) { + data[i] = vsp1_hgo_read(hgo, VI6_HGO_R_HISTO(i)); + data[i+64] = vsp1_hgo_read(hgo, VI6_HGO_G_HISTO(i)); + data[i+128] = vsp1_hgo_read(hgo, VI6_HGO_B_HISTO(i)); + } + + size = (6 + 64 * 3) * sizeof(u32); + } + + vsp1_histogram_buffer_complete(&hgo->histo, buf, size); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +#define V4L2_CID_VSP1_HGO_MAX_RGB (V4L2_CID_USER_BASE | 0x1001) +#define V4L2_CID_VSP1_HGO_NUM_BINS (V4L2_CID_USER_BASE | 0x1002) + +static const struct v4l2_ctrl_config hgo_max_rgb_control = { + .id = V4L2_CID_VSP1_HGO_MAX_RGB, + .name = "Maximum RGB Mode", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .def = 0, + .step = 1, + .flags = V4L2_CTRL_FLAG_MODIFY_LAYOUT, +}; + +static const s64 hgo_num_bins[] = { + 64, 256, +}; + +static const struct v4l2_ctrl_config hgo_num_bins_control = { + .id = V4L2_CID_VSP1_HGO_NUM_BINS, + .name = "Number of Bins", + .type = V4L2_CTRL_TYPE_INTEGER_MENU, + .min = 0, + .max = 1, + .def = 0, + .qmenu_int = hgo_num_bins, + .flags = V4L2_CTRL_FLAG_MODIFY_LAYOUT, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void hgo_configure(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + enum vsp1_entity_params params) +{ + struct vsp1_hgo *hgo = to_hgo(&entity->subdev); + struct v4l2_rect *compose; + struct v4l2_rect *crop; + unsigned int hratio; + unsigned int vratio; + + if (params != VSP1_ENTITY_PARAMS_INIT) + return; + + crop = vsp1_entity_get_pad_selection(entity, entity->config, + HISTO_PAD_SINK, V4L2_SEL_TGT_CROP); + compose = vsp1_entity_get_pad_selection(entity, entity->config, + HISTO_PAD_SINK, + V4L2_SEL_TGT_COMPOSE); + + vsp1_hgo_write(hgo, dl, VI6_HGO_REGRST, VI6_HGO_REGRST_RCLEA); + + vsp1_hgo_write(hgo, dl, VI6_HGO_OFFSET, + (crop->left << VI6_HGO_OFFSET_HOFFSET_SHIFT) | + (crop->top << VI6_HGO_OFFSET_VOFFSET_SHIFT)); + vsp1_hgo_write(hgo, dl, VI6_HGO_SIZE, + (crop->width << VI6_HGO_SIZE_HSIZE_SHIFT) | + (crop->height << VI6_HGO_SIZE_VSIZE_SHIFT)); + + mutex_lock(hgo->ctrls.handler.lock); + hgo->max_rgb = hgo->ctrls.max_rgb->cur.val; + if (hgo->ctrls.num_bins) + hgo->num_bins = hgo_num_bins[hgo->ctrls.num_bins->cur.val]; + mutex_unlock(hgo->ctrls.handler.lock); + + hratio = crop->width * 2 / compose->width / 3; + vratio = crop->height * 2 / compose->height / 3; + vsp1_hgo_write(hgo, dl, VI6_HGO_MODE, + (hgo->num_bins == 256 ? VI6_HGO_MODE_STEP : 0) | + (hgo->max_rgb ? VI6_HGO_MODE_MAXRGB : 0) | + (hratio << VI6_HGO_MODE_HRATIO_SHIFT) | + (vratio << VI6_HGO_MODE_VRATIO_SHIFT)); +} + +static const struct vsp1_entity_operations hgo_entity_ops = { + .configure = hgo_configure, + .destroy = vsp1_histogram_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +static const unsigned int hgo_mbus_formats[] = { + MEDIA_BUS_FMT_AYUV8_1X32, + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AHSV8888_1X32, +}; + +struct vsp1_hgo *vsp1_hgo_create(struct vsp1_device *vsp1) +{ + struct vsp1_hgo *hgo; + int ret; + + hgo = devm_kzalloc(vsp1->dev, sizeof(*hgo), GFP_KERNEL); + if (hgo == NULL) + return ERR_PTR(-ENOMEM); + + /* Initialize the control handler. */ + v4l2_ctrl_handler_init(&hgo->ctrls.handler, + vsp1->info->gen == 3 ? 2 : 1); + hgo->ctrls.max_rgb = v4l2_ctrl_new_custom(&hgo->ctrls.handler, + &hgo_max_rgb_control, NULL); + if (vsp1->info->gen == 3) + hgo->ctrls.num_bins = + v4l2_ctrl_new_custom(&hgo->ctrls.handler, + &hgo_num_bins_control, NULL); + + hgo->max_rgb = false; + hgo->num_bins = 64; + + hgo->histo.entity.subdev.ctrl_handler = &hgo->ctrls.handler; + + /* Initialize the video device and queue for statistics data. */ + ret = vsp1_histogram_init(vsp1, &hgo->histo, VSP1_ENTITY_HGO, "hgo", + &hgo_entity_ops, hgo_mbus_formats, + ARRAY_SIZE(hgo_mbus_formats), + HGO_DATA_SIZE, V4L2_META_FMT_VSP1_HGO); + if (ret < 0) { + vsp1_entity_destroy(&hgo->histo.entity); + return ERR_PTR(ret); + } + + return hgo; +} diff --git a/drivers/media/platform/vsp1/vsp1_hgo.h b/drivers/media/platform/vsp1/vsp1_hgo.h new file mode 100644 index 000000000000..c6c0b7a80e0c --- /dev/null +++ b/drivers/media/platform/vsp1/vsp1_hgo.h @@ -0,0 +1,45 @@ +/* + * vsp1_hgo.h -- R-Car VSP1 Histogram Generator 1D + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __VSP1_HGO_H__ +#define __VSP1_HGO_H__ + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_histo.h" + +struct vsp1_device; + +struct vsp1_hgo { + struct vsp1_histogram histo; + + struct { + struct v4l2_ctrl_handler handler; + struct v4l2_ctrl *max_rgb; + struct v4l2_ctrl *num_bins; + } ctrls; + + bool max_rgb; + unsigned int num_bins; +}; + +static inline struct vsp1_hgo *to_hgo(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_hgo, histo.entity.subdev); +} + +struct vsp1_hgo *vsp1_hgo_create(struct vsp1_device *vsp1); +void vsp1_hgo_frame_end(struct vsp1_entity *hgo); + +#endif /* __VSP1_HGO_H__ */ diff --git a/drivers/media/platform/vsp1/vsp1_hgt.c b/drivers/media/platform/vsp1/vsp1_hgt.c new file mode 100644 index 000000000000..b5ce305e3e6f --- /dev/null +++ b/drivers/media/platform/vsp1/vsp1_hgt.c @@ -0,0 +1,222 @@ +/* + * vsp1_hgt.c -- R-Car VSP1 Histogram Generator 2D + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Niklas Söderlund (niklas.soderlund@ragnatech.se) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> +#include <media/videobuf2-vmalloc.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_hgt.h" + +#define HGT_DATA_SIZE ((2 + 6 * 32) * 4) + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline u32 vsp1_hgt_read(struct vsp1_hgt *hgt, u32 reg) +{ + return vsp1_read(hgt->histo.entity.vsp1, reg); +} + +static inline void vsp1_hgt_write(struct vsp1_hgt *hgt, struct vsp1_dl_list *dl, + u32 reg, u32 data) +{ + vsp1_dl_list_write(dl, reg, data); +} + +/* ----------------------------------------------------------------------------- + * Frame End Handler + */ + +void vsp1_hgt_frame_end(struct vsp1_entity *entity) +{ + struct vsp1_hgt *hgt = to_hgt(&entity->subdev); + struct vsp1_histogram_buffer *buf; + unsigned int m; + unsigned int n; + u32 *data; + + buf = vsp1_histogram_buffer_get(&hgt->histo); + if (!buf) + return; + + data = buf->addr; + + *data++ = vsp1_hgt_read(hgt, VI6_HGT_MAXMIN); + *data++ = vsp1_hgt_read(hgt, VI6_HGT_SUM); + + for (m = 0; m < 6; ++m) + for (n = 0; n < 32; ++n) + *data++ = vsp1_hgt_read(hgt, VI6_HGT_HISTO(m, n)); + + vsp1_histogram_buffer_complete(&hgt->histo, buf, HGT_DATA_SIZE); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +#define V4L2_CID_VSP1_HGT_HUE_AREAS (V4L2_CID_USER_BASE | 0x1001) + +static int hgt_hue_areas_try_ctrl(struct v4l2_ctrl *ctrl) +{ + const u8 *values = ctrl->p_new.p_u8; + unsigned int i; + + /* + * The hardware has constraints on the hue area boundaries beyond the + * control min, max and step. The values must match one of the following + * expressions. + * + * 0L <= 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U + * 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U <= 0L + * + * Start by verifying the common part... + */ + for (i = 1; i < (HGT_NUM_HUE_AREAS * 2) - 1; ++i) { + if (values[i] > values[i+1]) + return -EINVAL; + } + + /* ... and handle 0L separately. */ + if (values[0] > values[1] && values[11] > values[0]) + return -EINVAL; + + return 0; +} + +static int hgt_hue_areas_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct vsp1_hgt *hgt = container_of(ctrl->handler, struct vsp1_hgt, + ctrls); + + memcpy(hgt->hue_areas, ctrl->p_new.p_u8, sizeof(hgt->hue_areas)); + return 0; +} + +static const struct v4l2_ctrl_ops hgt_hue_areas_ctrl_ops = { + .try_ctrl = hgt_hue_areas_try_ctrl, + .s_ctrl = hgt_hue_areas_s_ctrl, +}; + +static const struct v4l2_ctrl_config hgt_hue_areas = { + .ops = &hgt_hue_areas_ctrl_ops, + .id = V4L2_CID_VSP1_HGT_HUE_AREAS, + .name = "Boundary Values for Hue Area", + .type = V4L2_CTRL_TYPE_U8, + .min = 0, + .max = 255, + .def = 0, + .step = 1, + .dims = { 12 }, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void hgt_configure(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + enum vsp1_entity_params params) +{ + struct vsp1_hgt *hgt = to_hgt(&entity->subdev); + struct v4l2_rect *compose; + struct v4l2_rect *crop; + unsigned int hratio; + unsigned int vratio; + u8 lower; + u8 upper; + unsigned int i; + + if (params != VSP1_ENTITY_PARAMS_INIT) + return; + + crop = vsp1_entity_get_pad_selection(entity, entity->config, + HISTO_PAD_SINK, V4L2_SEL_TGT_CROP); + compose = vsp1_entity_get_pad_selection(entity, entity->config, + HISTO_PAD_SINK, + V4L2_SEL_TGT_COMPOSE); + + vsp1_hgt_write(hgt, dl, VI6_HGT_REGRST, VI6_HGT_REGRST_RCLEA); + + vsp1_hgt_write(hgt, dl, VI6_HGT_OFFSET, + (crop->left << VI6_HGT_OFFSET_HOFFSET_SHIFT) | + (crop->top << VI6_HGT_OFFSET_VOFFSET_SHIFT)); + vsp1_hgt_write(hgt, dl, VI6_HGT_SIZE, + (crop->width << VI6_HGT_SIZE_HSIZE_SHIFT) | + (crop->height << VI6_HGT_SIZE_VSIZE_SHIFT)); + + mutex_lock(hgt->ctrls.lock); + for (i = 0; i < HGT_NUM_HUE_AREAS; ++i) { + lower = hgt->hue_areas[i*2 + 0]; + upper = hgt->hue_areas[i*2 + 1]; + vsp1_hgt_write(hgt, dl, VI6_HGT_HUE_AREA(i), + (lower << VI6_HGT_HUE_AREA_LOWER_SHIFT) | + (upper << VI6_HGT_HUE_AREA_UPPER_SHIFT)); + } + mutex_unlock(hgt->ctrls.lock); + + hratio = crop->width * 2 / compose->width / 3; + vratio = crop->height * 2 / compose->height / 3; + vsp1_hgt_write(hgt, dl, VI6_HGT_MODE, + (hratio << VI6_HGT_MODE_HRATIO_SHIFT) | + (vratio << VI6_HGT_MODE_VRATIO_SHIFT)); +} + +static const struct vsp1_entity_operations hgt_entity_ops = { + .configure = hgt_configure, + .destroy = vsp1_histogram_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +static const unsigned int hgt_mbus_formats[] = { + MEDIA_BUS_FMT_AHSV8888_1X32, +}; + +struct vsp1_hgt *vsp1_hgt_create(struct vsp1_device *vsp1) +{ + struct vsp1_hgt *hgt; + int ret; + + hgt = devm_kzalloc(vsp1->dev, sizeof(*hgt), GFP_KERNEL); + if (hgt == NULL) + return ERR_PTR(-ENOMEM); + + /* Initialize the control handler. */ + v4l2_ctrl_handler_init(&hgt->ctrls, 1); + v4l2_ctrl_new_custom(&hgt->ctrls, &hgt_hue_areas, NULL); + + hgt->histo.entity.subdev.ctrl_handler = &hgt->ctrls; + + /* Initialize the video device and queue for statistics data. */ + ret = vsp1_histogram_init(vsp1, &hgt->histo, VSP1_ENTITY_HGT, "hgt", + &hgt_entity_ops, hgt_mbus_formats, + ARRAY_SIZE(hgt_mbus_formats), + HGT_DATA_SIZE, V4L2_META_FMT_VSP1_HGT); + if (ret < 0) { + vsp1_entity_destroy(&hgt->histo.entity); + return ERR_PTR(ret); + } + + v4l2_ctrl_handler_setup(&hgt->ctrls); + + return hgt; +} diff --git a/drivers/media/platform/vsp1/vsp1_hgt.h b/drivers/media/platform/vsp1/vsp1_hgt.h new file mode 100644 index 000000000000..83f2e130942a --- /dev/null +++ b/drivers/media/platform/vsp1/vsp1_hgt.h @@ -0,0 +1,42 @@ +/* + * vsp1_hgt.h -- R-Car VSP1 Histogram Generator 2D + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Niklas Söderlund (niklas.soderlund@ragnatech.se) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __VSP1_HGT_H__ +#define __VSP1_HGT_H__ + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_histo.h" + +struct vsp1_device; + +#define HGT_NUM_HUE_AREAS 6 + +struct vsp1_hgt { + struct vsp1_histogram histo; + + struct v4l2_ctrl_handler ctrls; + + u8 hue_areas[HGT_NUM_HUE_AREAS * 2]; +}; + +static inline struct vsp1_hgt *to_hgt(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_hgt, histo.entity.subdev); +} + +struct vsp1_hgt *vsp1_hgt_create(struct vsp1_device *vsp1); +void vsp1_hgt_frame_end(struct vsp1_entity *hgt); + +#endif /* __VSP1_HGT_H__ */ diff --git a/drivers/media/platform/vsp1/vsp1_histo.c b/drivers/media/platform/vsp1/vsp1_histo.c new file mode 100644 index 000000000000..afab77cf4fa5 --- /dev/null +++ b/drivers/media/platform/vsp1/vsp1_histo.c @@ -0,0 +1,646 @@ +/* + * vsp1_histo.c -- R-Car VSP1 Histogram API + * + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2016 Laurent Pinchart + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-ioctl.h> +#include <media/v4l2-subdev.h> +#include <media/videobuf2-vmalloc.h> + +#include "vsp1.h" +#include "vsp1_histo.h" +#include "vsp1_pipe.h" + +#define HISTO_MIN_SIZE 4U +#define HISTO_MAX_SIZE 8192U + +/* ----------------------------------------------------------------------------- + * Buffer Operations + */ + +static inline struct vsp1_histogram_buffer * +to_vsp1_histogram_buffer(struct vb2_v4l2_buffer *vbuf) +{ + return container_of(vbuf, struct vsp1_histogram_buffer, buf); +} + +struct vsp1_histogram_buffer * +vsp1_histogram_buffer_get(struct vsp1_histogram *histo) +{ + struct vsp1_histogram_buffer *buf = NULL; + unsigned long flags; + + spin_lock_irqsave(&histo->irqlock, flags); + + if (list_empty(&histo->irqqueue)) + goto done; + + buf = list_first_entry(&histo->irqqueue, struct vsp1_histogram_buffer, + queue); + list_del(&buf->queue); + histo->readout = true; + +done: + spin_unlock_irqrestore(&histo->irqlock, flags); + return buf; +} + +void vsp1_histogram_buffer_complete(struct vsp1_histogram *histo, + struct vsp1_histogram_buffer *buf, + size_t size) +{ + struct vsp1_pipeline *pipe = histo->pipe; + unsigned long flags; + + /* + * The pipeline pointer is guaranteed to be valid as this function is + * called from the frame completion interrupt handler, which can only + * occur when video streaming is active. + */ + buf->buf.sequence = pipe->sequence; + buf->buf.vb2_buf.timestamp = ktime_get_ns(); + vb2_set_plane_payload(&buf->buf.vb2_buf, 0, size); + vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_DONE); + + spin_lock_irqsave(&histo->irqlock, flags); + histo->readout = false; + wake_up(&histo->wait_queue); + spin_unlock_irqrestore(&histo->irqlock, flags); +} + +/* ----------------------------------------------------------------------------- + * videobuf2 Queue Operations + */ + +static int histo_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct vsp1_histogram *histo = vb2_get_drv_priv(vq); + + if (*nplanes) { + if (*nplanes != 1) + return -EINVAL; + + if (sizes[0] < histo->data_size) + return -EINVAL; + + return 0; + } + + *nplanes = 1; + sizes[0] = histo->data_size; + + return 0; +} + +static int histo_buffer_prepare(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct vsp1_histogram *histo = vb2_get_drv_priv(vb->vb2_queue); + struct vsp1_histogram_buffer *buf = to_vsp1_histogram_buffer(vbuf); + + if (vb->num_planes != 1) + return -EINVAL; + + if (vb2_plane_size(vb, 0) < histo->data_size) + return -EINVAL; + + buf->addr = vb2_plane_vaddr(vb, 0); + + return 0; +} + +static void histo_buffer_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct vsp1_histogram *histo = vb2_get_drv_priv(vb->vb2_queue); + struct vsp1_histogram_buffer *buf = to_vsp1_histogram_buffer(vbuf); + unsigned long flags; + + spin_lock_irqsave(&histo->irqlock, flags); + list_add_tail(&buf->queue, &histo->irqqueue); + spin_unlock_irqrestore(&histo->irqlock, flags); +} + +static int histo_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + return 0; +} + +static void histo_stop_streaming(struct vb2_queue *vq) +{ + struct vsp1_histogram *histo = vb2_get_drv_priv(vq); + struct vsp1_histogram_buffer *buffer; + unsigned long flags; + + spin_lock_irqsave(&histo->irqlock, flags); + + /* Remove all buffers from the IRQ queue. */ + list_for_each_entry(buffer, &histo->irqqueue, queue) + vb2_buffer_done(&buffer->buf.vb2_buf, VB2_BUF_STATE_ERROR); + INIT_LIST_HEAD(&histo->irqqueue); + + /* Wait for the buffer being read out (if any) to complete. */ + wait_event_lock_irq(histo->wait_queue, !histo->readout, histo->irqlock); + + spin_unlock_irqrestore(&histo->irqlock, flags); +} + +static const struct vb2_ops histo_video_queue_qops = { + .queue_setup = histo_queue_setup, + .buf_prepare = histo_buffer_prepare, + .buf_queue = histo_buffer_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = histo_start_streaming, + .stop_streaming = histo_stop_streaming, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static int histo_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + + if (code->pad == HISTO_PAD_SOURCE) { + code->code = MEDIA_BUS_FMT_FIXED; + return 0; + } + + return vsp1_subdev_enum_mbus_code(subdev, cfg, code, histo->formats, + histo->num_formats); +} + +static int histo_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->pad != HISTO_PAD_SINK) + return -EINVAL; + + return vsp1_subdev_enum_frame_size(subdev, cfg, fse, HISTO_MIN_SIZE, + HISTO_MIN_SIZE, HISTO_MAX_SIZE, + HISTO_MAX_SIZE); +} + +static int histo_get_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + struct v4l2_subdev_pad_config *config; + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + int ret = 0; + + if (sel->pad != HISTO_PAD_SINK) + return -EINVAL; + + mutex_lock(&histo->entity.lock); + + config = vsp1_entity_get_pad_config(&histo->entity, cfg, sel->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + switch (sel->target) { + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + crop = vsp1_entity_get_pad_selection(&histo->entity, config, + HISTO_PAD_SINK, + V4L2_SEL_TGT_CROP); + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = crop->width; + sel->r.height = crop->height; + break; + + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + format = vsp1_entity_get_pad_format(&histo->entity, config, + HISTO_PAD_SINK); + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = format->width; + sel->r.height = format->height; + break; + + case V4L2_SEL_TGT_COMPOSE: + case V4L2_SEL_TGT_CROP: + sel->r = *vsp1_entity_get_pad_selection(&histo->entity, config, + sel->pad, sel->target); + break; + + default: + ret = -EINVAL; + break; + } + +done: + mutex_unlock(&histo->entity.lock); + return ret; +} + +static int histo_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *config, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *selection; + + /* The crop rectangle must be inside the input frame. */ + format = vsp1_entity_get_pad_format(&histo->entity, config, + HISTO_PAD_SINK); + sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1); + sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1); + sel->r.width = clamp_t(unsigned int, sel->r.width, HISTO_MIN_SIZE, + format->width - sel->r.left); + sel->r.height = clamp_t(unsigned int, sel->r.height, HISTO_MIN_SIZE, + format->height - sel->r.top); + + /* Set the crop rectangle and reset the compose rectangle. */ + selection = vsp1_entity_get_pad_selection(&histo->entity, config, + sel->pad, V4L2_SEL_TGT_CROP); + *selection = sel->r; + + selection = vsp1_entity_get_pad_selection(&histo->entity, config, + sel->pad, + V4L2_SEL_TGT_COMPOSE); + *selection = sel->r; + + return 0; +} + +static int histo_set_compose(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *config, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + struct v4l2_rect *compose; + struct v4l2_rect *crop; + unsigned int ratio; + + /* + * The compose rectangle is used to configure downscaling, the top left + * corner is fixed to (0,0) and the size to 1/2 or 1/4 of the crop + * rectangle. + */ + sel->r.left = 0; + sel->r.top = 0; + + crop = vsp1_entity_get_pad_selection(&histo->entity, config, sel->pad, + V4L2_SEL_TGT_CROP); + + /* + * Clamp the width and height to acceptable values first and then + * compute the closest rounded dividing ratio. + * + * Ratio Rounded ratio + * -------------------------- + * [1.0 1.5[ 1 + * [1.5 3.0[ 2 + * [3.0 4.0] 4 + * + * The rounded ratio can be computed using + * + * 1 << (ceil(ratio * 2) / 3) + */ + sel->r.width = clamp(sel->r.width, crop->width / 4, crop->width); + ratio = 1 << (crop->width * 2 / sel->r.width / 3); + sel->r.width = crop->width / ratio; + + + sel->r.height = clamp(sel->r.height, crop->height / 4, crop->height); + ratio = 1 << (crop->height * 2 / sel->r.height / 3); + sel->r.height = crop->height / ratio; + + compose = vsp1_entity_get_pad_selection(&histo->entity, config, + sel->pad, + V4L2_SEL_TGT_COMPOSE); + *compose = sel->r; + + return 0; +} + +static int histo_set_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + struct v4l2_subdev_pad_config *config; + int ret; + + if (sel->pad != HISTO_PAD_SINK) + return -EINVAL; + + mutex_lock(&histo->entity.lock); + + config = vsp1_entity_get_pad_config(&histo->entity, cfg, sel->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + if (sel->target == V4L2_SEL_TGT_CROP) + ret = histo_set_crop(subdev, config, sel); + else if (sel->target == V4L2_SEL_TGT_COMPOSE) + ret = histo_set_compose(subdev, config, sel); + else + ret = -EINVAL; + +done: + mutex_unlock(&histo->entity.lock); + return ret; +} + +static int histo_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *fmt) +{ + if (fmt->pad == HISTO_PAD_SOURCE) { + fmt->format.code = MEDIA_BUS_FMT_FIXED; + fmt->format.width = 0; + fmt->format.height = 0; + fmt->format.field = V4L2_FIELD_NONE; + fmt->format.colorspace = V4L2_COLORSPACE_RAW; + return 0; + } + + return vsp1_subdev_get_pad_format(subdev, cfg, fmt); +} + +static int histo_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *fmt) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + struct v4l2_subdev_pad_config *config; + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *selection; + unsigned int i; + int ret = 0; + + if (fmt->pad != HISTO_PAD_SINK) + return histo_get_format(subdev, cfg, fmt); + + mutex_lock(&histo->entity.lock); + + config = vsp1_entity_get_pad_config(&histo->entity, cfg, fmt->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + /* + * Default to the first format if the requested format is not + * supported. + */ + for (i = 0; i < histo->num_formats; ++i) { + if (fmt->format.code == histo->formats[i]) + break; + } + if (i == histo->num_formats) + fmt->format.code = histo->formats[0]; + + format = vsp1_entity_get_pad_format(&histo->entity, config, fmt->pad); + + format->code = fmt->format.code; + format->width = clamp_t(unsigned int, fmt->format.width, + HISTO_MIN_SIZE, HISTO_MAX_SIZE); + format->height = clamp_t(unsigned int, fmt->format.height, + HISTO_MIN_SIZE, HISTO_MAX_SIZE); + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + fmt->format = *format; + + /* Reset the crop and compose rectangles */ + selection = vsp1_entity_get_pad_selection(&histo->entity, config, + fmt->pad, V4L2_SEL_TGT_CROP); + selection->left = 0; + selection->top = 0; + selection->width = format->width; + selection->height = format->height; + + selection = vsp1_entity_get_pad_selection(&histo->entity, config, + fmt->pad, + V4L2_SEL_TGT_COMPOSE); + selection->left = 0; + selection->top = 0; + selection->width = format->width; + selection->height = format->height; + +done: + mutex_unlock(&histo->entity.lock); + return ret; +} + +static const struct v4l2_subdev_pad_ops histo_pad_ops = { + .enum_mbus_code = histo_enum_mbus_code, + .enum_frame_size = histo_enum_frame_size, + .get_fmt = histo_get_format, + .set_fmt = histo_set_format, + .get_selection = histo_get_selection, + .set_selection = histo_set_selection, +}; + +static const struct v4l2_subdev_ops histo_ops = { + .pad = &histo_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 ioctls + */ + +static int histo_v4l2_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_histogram *histo = vdev_to_histo(vfh->vdev); + + cap->capabilities = V4L2_CAP_DEVICE_CAPS | V4L2_CAP_STREAMING + | V4L2_CAP_VIDEO_CAPTURE_MPLANE + | V4L2_CAP_VIDEO_OUTPUT_MPLANE + | V4L2_CAP_META_CAPTURE; + cap->device_caps = V4L2_CAP_META_CAPTURE + | V4L2_CAP_STREAMING; + + strlcpy(cap->driver, "vsp1", sizeof(cap->driver)); + strlcpy(cap->card, histo->video.name, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + dev_name(histo->entity.vsp1->dev)); + + return 0; +} + +static int histo_v4l2_enum_format(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_histogram *histo = vdev_to_histo(vfh->vdev); + + if (f->index > 0 || f->type != histo->queue.type) + return -EINVAL; + + f->pixelformat = histo->meta_format; + + return 0; +} + +static int histo_v4l2_get_format(struct file *file, void *fh, + struct v4l2_format *format) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_histogram *histo = vdev_to_histo(vfh->vdev); + struct v4l2_meta_format *meta = &format->fmt.meta; + + if (format->type != histo->queue.type) + return -EINVAL; + + memset(meta, 0, sizeof(*meta)); + + meta->dataformat = histo->meta_format; + meta->buffersize = histo->data_size; + + return 0; +} + +static const struct v4l2_ioctl_ops histo_v4l2_ioctl_ops = { + .vidioc_querycap = histo_v4l2_querycap, + .vidioc_enum_fmt_meta_cap = histo_v4l2_enum_format, + .vidioc_g_fmt_meta_cap = histo_v4l2_get_format, + .vidioc_s_fmt_meta_cap = histo_v4l2_get_format, + .vidioc_try_fmt_meta_cap = histo_v4l2_get_format, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 File Operations + */ + +static const struct v4l2_file_operations histo_v4l2_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, +}; + +static void vsp1_histogram_cleanup(struct vsp1_histogram *histo) +{ + if (video_is_registered(&histo->video)) + video_unregister_device(&histo->video); + + media_entity_cleanup(&histo->video.entity); +} + +void vsp1_histogram_destroy(struct vsp1_entity *entity) +{ + struct vsp1_histogram *histo = subdev_to_histo(&entity->subdev); + + vsp1_histogram_cleanup(histo); +} + +int vsp1_histogram_init(struct vsp1_device *vsp1, struct vsp1_histogram *histo, + enum vsp1_entity_type type, const char *name, + const struct vsp1_entity_operations *ops, + const unsigned int *formats, unsigned int num_formats, + size_t data_size, u32 meta_format) +{ + int ret; + + histo->formats = formats; + histo->num_formats = num_formats; + histo->data_size = data_size; + histo->meta_format = meta_format; + + histo->pad.flags = MEDIA_PAD_FL_SINK; + histo->video.vfl_dir = VFL_DIR_RX; + + mutex_init(&histo->lock); + spin_lock_init(&histo->irqlock); + INIT_LIST_HEAD(&histo->irqqueue); + init_waitqueue_head(&histo->wait_queue); + + /* Initialize the VSP entity... */ + histo->entity.ops = ops; + histo->entity.type = type; + + ret = vsp1_entity_init(vsp1, &histo->entity, name, 2, &histo_ops, + MEDIA_ENT_F_PROC_VIDEO_STATISTICS); + if (ret < 0) + return ret; + + /* ... and the media entity... */ + ret = media_entity_pads_init(&histo->video.entity, 1, &histo->pad); + if (ret < 0) + return ret; + + /* ... and the video node... */ + histo->video.v4l2_dev = &vsp1->v4l2_dev; + histo->video.fops = &histo_v4l2_fops; + snprintf(histo->video.name, sizeof(histo->video.name), + "%s histo", histo->entity.subdev.name); + histo->video.vfl_type = VFL_TYPE_GRABBER; + histo->video.release = video_device_release_empty; + histo->video.ioctl_ops = &histo_v4l2_ioctl_ops; + + video_set_drvdata(&histo->video, histo); + + /* ... and the buffers queue... */ + histo->queue.type = V4L2_BUF_TYPE_META_CAPTURE; + histo->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + histo->queue.lock = &histo->lock; + histo->queue.drv_priv = histo; + histo->queue.buf_struct_size = sizeof(struct vsp1_histogram_buffer); + histo->queue.ops = &histo_video_queue_qops; + histo->queue.mem_ops = &vb2_vmalloc_memops; + histo->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + histo->queue.dev = vsp1->dev; + ret = vb2_queue_init(&histo->queue); + if (ret < 0) { + dev_err(vsp1->dev, "failed to initialize vb2 queue\n"); + goto error; + } + + /* ... and register the video device. */ + histo->video.queue = &histo->queue; + ret = video_register_device(&histo->video, VFL_TYPE_GRABBER, -1); + if (ret < 0) { + dev_err(vsp1->dev, "failed to register video device\n"); + goto error; + } + + return 0; + +error: + vsp1_histogram_cleanup(histo); + return ret; +} diff --git a/drivers/media/platform/vsp1/vsp1_histo.h b/drivers/media/platform/vsp1/vsp1_histo.h new file mode 100644 index 000000000000..af2874f6031d --- /dev/null +++ b/drivers/media/platform/vsp1/vsp1_histo.h @@ -0,0 +1,84 @@ +/* + * vsp1_histo.h -- R-Car VSP1 Histogram API + * + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2016 Laurent Pinchart + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __VSP1_HISTO_H__ +#define __VSP1_HISTO_H__ + +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> + +#include <media/media-entity.h> +#include <media/v4l2-dev.h> +#include <media/videobuf2-v4l2.h> + +#include "vsp1_entity.h" + +struct vsp1_device; +struct vsp1_pipeline; + +#define HISTO_PAD_SINK 0 +#define HISTO_PAD_SOURCE 1 + +struct vsp1_histogram_buffer { + struct vb2_v4l2_buffer buf; + struct list_head queue; + void *addr; +}; + +struct vsp1_histogram { + struct vsp1_pipeline *pipe; + + struct vsp1_entity entity; + struct video_device video; + struct media_pad pad; + + const u32 *formats; + unsigned int num_formats; + size_t data_size; + u32 meta_format; + + struct mutex lock; + struct vb2_queue queue; + + spinlock_t irqlock; + struct list_head irqqueue; + + wait_queue_head_t wait_queue; + bool readout; +}; + +static inline struct vsp1_histogram *vdev_to_histo(struct video_device *vdev) +{ + return container_of(vdev, struct vsp1_histogram, video); +} + +static inline struct vsp1_histogram *subdev_to_histo(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_histogram, entity.subdev); +} + +int vsp1_histogram_init(struct vsp1_device *vsp1, struct vsp1_histogram *histo, + enum vsp1_entity_type type, const char *name, + const struct vsp1_entity_operations *ops, + const unsigned int *formats, unsigned int num_formats, + size_t data_size, u32 meta_format); +void vsp1_histogram_destroy(struct vsp1_entity *entity); + +struct vsp1_histogram_buffer * +vsp1_histogram_buffer_get(struct vsp1_histogram *histo); +void vsp1_histogram_buffer_complete(struct vsp1_histogram *histo, + struct vsp1_histogram_buffer *buf, + size_t size); + +#endif /* __VSP1_HISTO_H__ */ diff --git a/drivers/media/platform/vsp1/vsp1_hsit.c b/drivers/media/platform/vsp1/vsp1_hsit.c index 94316afc54ff..764d405345ee 100644 --- a/drivers/media/platform/vsp1/vsp1_hsit.c +++ b/drivers/media/platform/vsp1/vsp1_hsit.c @@ -84,7 +84,8 @@ static int hsit_set_format(struct v4l2_subdev *subdev, format = vsp1_entity_get_pad_format(&hsit->entity, config, fmt->pad); if (fmt->pad == HSIT_PAD_SOURCE) { - /* The HST and HSI output format code and resolution can't be + /* + * The HST and HSI output format code and resolution can't be * modified. */ fmt->format = *format; diff --git a/drivers/media/platform/vsp1/vsp1_lif.c b/drivers/media/platform/vsp1/vsp1_lif.c index e32acae1fc6e..702487f895b3 100644 --- a/drivers/media/platform/vsp1/vsp1_lif.c +++ b/drivers/media/platform/vsp1/vsp1_lif.c @@ -84,7 +84,8 @@ static int lif_set_format(struct v4l2_subdev *subdev, format = vsp1_entity_get_pad_format(&lif->entity, config, fmt->pad); if (fmt->pad == LIF_PAD_SOURCE) { - /* The LIF source format is always identical to its sink + /* + * The LIF source format is always identical to its sink * format. */ fmt->format = *format; @@ -176,7 +177,8 @@ struct vsp1_lif *vsp1_lif_create(struct vsp1_device *vsp1) lif->entity.ops = &lif_entity_ops; lif->entity.type = VSP1_ENTITY_LIF; - /* The LIF is never exposed to userspace, but media entity registration + /* + * The LIF is never exposed to userspace, but media entity registration * requires a function to be set. Use PROC_VIDEO_PIXEL_FORMATTER just to * avoid triggering a WARN_ON(), the value won't be seen anywhere. */ diff --git a/drivers/media/platform/vsp1/vsp1_pipe.c b/drivers/media/platform/vsp1/vsp1_pipe.c index 280ba0804699..edebf3fa926f 100644 --- a/drivers/media/platform/vsp1/vsp1_pipe.c +++ b/drivers/media/platform/vsp1/vsp1_pipe.c @@ -23,6 +23,8 @@ #include "vsp1_bru.h" #include "vsp1_dl.h" #include "vsp1_entity.h" +#include "vsp1_hgo.h" +#include "vsp1_hgt.h" #include "vsp1_pipe.h" #include "vsp1_rwpf.h" #include "vsp1_uds.h" @@ -157,9 +159,15 @@ const struct vsp1_format_info *vsp1_get_format_info(struct vsp1_device *vsp1, { unsigned int i; - /* Special case, the VYUY format is supported on Gen2 only. */ - if (vsp1->info->gen != 2 && fourcc == V4L2_PIX_FMT_VYUY) - return NULL; + /* Special case, the VYUY and HSV formats are supported on Gen2 only. */ + if (vsp1->info->gen != 2) { + switch (fourcc) { + case V4L2_PIX_FMT_VYUY: + case V4L2_PIX_FMT_HSV24: + case V4L2_PIX_FMT_HSV32: + return NULL; + } + } for (i = 0; i < ARRAY_SIZE(vsp1_video_formats); ++i) { const struct vsp1_format_info *info = &vsp1_video_formats[i]; @@ -198,11 +206,25 @@ void vsp1_pipeline_reset(struct vsp1_pipeline *pipe) pipe->output = NULL; } + if (pipe->hgo) { + struct vsp1_hgo *hgo = to_hgo(&pipe->hgo->subdev); + + hgo->histo.pipe = NULL; + } + + if (pipe->hgt) { + struct vsp1_hgt *hgt = to_hgt(&pipe->hgt->subdev); + + hgt->histo.pipe = NULL; + } + INIT_LIST_HEAD(&pipe->entities); pipe->state = VSP1_PIPELINE_STOPPED; pipe->buffers_ready = 0; pipe->num_inputs = 0; pipe->bru = NULL; + pipe->hgo = NULL; + pipe->hgt = NULL; pipe->lif = NULL; pipe->uds = NULL; } @@ -246,16 +268,17 @@ bool vsp1_pipeline_stopped(struct vsp1_pipeline *pipe) int vsp1_pipeline_stop(struct vsp1_pipeline *pipe) { + struct vsp1_device *vsp1 = pipe->output->entity.vsp1; struct vsp1_entity *entity; unsigned long flags; int ret; if (pipe->lif) { - /* When using display lists in continuous frame mode the only + /* + * When using display lists in continuous frame mode the only * way to stop the pipeline is to reset the hardware. */ - ret = vsp1_reset_wpf(pipe->output->entity.vsp1, - pipe->output->entity.index); + ret = vsp1_reset_wpf(vsp1, pipe->output->entity.index); if (ret == 0) { spin_lock_irqsave(&pipe->irqlock, flags); pipe->state = VSP1_PIPELINE_STOPPED; @@ -275,10 +298,20 @@ int vsp1_pipeline_stop(struct vsp1_pipeline *pipe) list_for_each_entry(entity, &pipe->entities, list_pipe) { if (entity->route && entity->route->reg) - vsp1_write(entity->vsp1, entity->route->reg, + vsp1_write(vsp1, entity->route->reg, VI6_DPR_NODE_UNUSED); } + if (pipe->hgo) + vsp1_write(vsp1, VI6_DPR_HGO_SMPPT, + (7 << VI6_DPR_SMPPT_TGW_SHIFT) | + (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT)); + + if (pipe->hgt) + vsp1_write(vsp1, VI6_DPR_HGT_SMPPT, + (7 << VI6_DPR_SMPPT_TGW_SHIFT) | + (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT)); + v4l2_subdev_call(&pipe->output->entity.subdev, video, s_stream, 0); return ret; @@ -302,6 +335,12 @@ void vsp1_pipeline_frame_end(struct vsp1_pipeline *pipe) vsp1_dlm_irq_frame_end(pipe->output->dlm); + if (pipe->hgo) + vsp1_hgo_frame_end(pipe->hgo); + + if (pipe->hgt) + vsp1_hgt_frame_end(pipe->hgt); + if (pipe->frame_end) pipe->frame_end(pipe); @@ -322,7 +361,8 @@ void vsp1_pipeline_propagate_alpha(struct vsp1_pipeline *pipe, if (!pipe->uds) return; - /* The BRU background color has a fixed alpha value set to 255, the + /* + * The BRU background color has a fixed alpha value set to 255, the * output alpha value is thus always equal to 255. */ if (pipe->uds_input->type == VSP1_ENTITY_BRU) @@ -337,7 +377,8 @@ void vsp1_pipelines_suspend(struct vsp1_device *vsp1) unsigned int i; int ret; - /* To avoid increasing the system suspend time needlessly, loop over the + /* + * To avoid increasing the system suspend time needlessly, loop over the * pipelines twice, first to set them all to the stopping state, and * then to wait for the stop to complete. */ diff --git a/drivers/media/platform/vsp1/vsp1_pipe.h b/drivers/media/platform/vsp1/vsp1_pipe.h index ac4ad2655551..91a784a13422 100644 --- a/drivers/media/platform/vsp1/vsp1_pipe.h +++ b/drivers/media/platform/vsp1/vsp1_pipe.h @@ -25,11 +25,12 @@ struct vsp1_rwpf; /* * struct vsp1_format_info - VSP1 video format description - * @mbus: media bus format code * @fourcc: V4L2 pixel format FCC identifier + * @mbus: media bus format code + * @hwfmt: VSP1 hardware format + * @swap: swap register control * @planes: number of planes * @bpp: bits per pixel - * @hwfmt: VSP1 hardware format * @swap_yc: the Y and C components are swapped (Y comes before C) * @swap_uv: the U and V components are swapped (V comes before U) * @hsub: horizontal subsampling factor @@ -72,6 +73,8 @@ enum vsp1_pipeline_state { * @inputs: array of RPFs in the pipeline (indexed by RPF index) * @output: WPF at the output of the pipeline * @bru: BRU entity, if present + * @hgo: HGO entity, if present + * @hgt: HGT entity, if present * @lif: LIF entity, if present * @uds: UDS entity, if present * @uds_input: entity at the input of the UDS, if the UDS is present @@ -100,6 +103,8 @@ struct vsp1_pipeline { struct vsp1_rwpf *inputs[VSP1_MAX_RPF]; struct vsp1_rwpf *output; struct vsp1_entity *bru; + struct vsp1_entity *hgo; + struct vsp1_entity *hgt; struct vsp1_entity *lif; struct vsp1_entity *uds; struct vsp1_entity *uds_input; diff --git a/drivers/media/platform/vsp1/vsp1_regs.h b/drivers/media/platform/vsp1/vsp1_regs.h index 47b1dee044fb..cd3e32af6e3b 100644 --- a/drivers/media/platform/vsp1/vsp1_regs.h +++ b/drivers/media/platform/vsp1/vsp1_regs.h @@ -328,8 +328,8 @@ #define VI6_DPR_ROUTE_RT_MASK (0x3f << 0) #define VI6_DPR_ROUTE_RT_SHIFT 0 -#define VI6_DPR_HGO_SMPPT 0x2050 -#define VI6_DPR_HGT_SMPPT 0x2054 +#define VI6_DPR_HGO_SMPPT 0x2054 +#define VI6_DPR_HGT_SMPPT 0x2058 #define VI6_DPR_SMPPT_TGW_MASK (7 << 8) #define VI6_DPR_SMPPT_TGW_SHIFT 8 #define VI6_DPR_SMPPT_PT_MASK (0x3f << 0) @@ -590,33 +590,55 @@ */ #define VI6_HGO_OFFSET 0x3000 +#define VI6_HGO_OFFSET_HOFFSET_SHIFT 16 +#define VI6_HGO_OFFSET_VOFFSET_SHIFT 0 #define VI6_HGO_SIZE 0x3004 +#define VI6_HGO_SIZE_HSIZE_SHIFT 16 +#define VI6_HGO_SIZE_VSIZE_SHIFT 0 #define VI6_HGO_MODE 0x3008 +#define VI6_HGO_MODE_STEP (1 << 10) +#define VI6_HGO_MODE_MAXRGB (1 << 7) +#define VI6_HGO_MODE_OFSB_R (1 << 6) +#define VI6_HGO_MODE_OFSB_G (1 << 5) +#define VI6_HGO_MODE_OFSB_B (1 << 4) +#define VI6_HGO_MODE_HRATIO_SHIFT 2 +#define VI6_HGO_MODE_VRATIO_SHIFT 0 #define VI6_HGO_LB_TH 0x300c #define VI6_HGO_LBn_H(n) (0x3010 + (n) * 8) #define VI6_HGO_LBn_V(n) (0x3014 + (n) * 8) -#define VI6_HGO_R_HISTO 0x3030 +#define VI6_HGO_R_HISTO(n) (0x3030 + (n) * 4) #define VI6_HGO_R_MAXMIN 0x3130 #define VI6_HGO_R_SUM 0x3134 #define VI6_HGO_R_LB_DET 0x3138 -#define VI6_HGO_G_HISTO 0x3140 +#define VI6_HGO_G_HISTO(n) (0x3140 + (n) * 4) #define VI6_HGO_G_MAXMIN 0x3240 #define VI6_HGO_G_SUM 0x3244 #define VI6_HGO_G_LB_DET 0x3248 -#define VI6_HGO_B_HISTO 0x3250 +#define VI6_HGO_B_HISTO(n) (0x3250 + (n) * 4) #define VI6_HGO_B_MAXMIN 0x3350 #define VI6_HGO_B_SUM 0x3354 #define VI6_HGO_B_LB_DET 0x3358 +#define VI6_HGO_EXT_HIST_ADDR 0x335c +#define VI6_HGO_EXT_HIST_DATA 0x3360 #define VI6_HGO_REGRST 0x33fc +#define VI6_HGO_REGRST_RCLEA (1 << 0) /* ----------------------------------------------------------------------------- * HGT Control Registers */ #define VI6_HGT_OFFSET 0x3400 +#define VI6_HGT_OFFSET_HOFFSET_SHIFT 16 +#define VI6_HGT_OFFSET_VOFFSET_SHIFT 0 #define VI6_HGT_SIZE 0x3404 +#define VI6_HGT_SIZE_HSIZE_SHIFT 16 +#define VI6_HGT_SIZE_VSIZE_SHIFT 0 #define VI6_HGT_MODE 0x3408 +#define VI6_HGT_MODE_HRATIO_SHIFT 2 +#define VI6_HGT_MODE_VRATIO_SHIFT 0 #define VI6_HGT_HUE_AREA(n) (0x340c + (n) * 4) +#define VI6_HGT_HUE_AREA_LOWER_SHIFT 16 +#define VI6_HGT_HUE_AREA_UPPER_SHIFT 0 #define VI6_HGT_LB_TH 0x3424 #define VI6_HGT_LBn_H(n) (0x3438 + (n) * 8) #define VI6_HGT_LBn_V(n) (0x342c + (n) * 8) @@ -625,6 +647,7 @@ #define VI6_HGT_SUM 0x3754 #define VI6_HGT_LB_DET 0x3758 #define VI6_HGT_REGRST 0x37fc +#define VI6_HGT_REGRST_RCLEA (1 << 0) /* ----------------------------------------------------------------------------- * LIF Control Registers diff --git a/drivers/media/platform/vsp1/vsp1_rpf.c b/drivers/media/platform/vsp1/vsp1_rpf.c index b2e34a800ffa..8feddd59cf8d 100644 --- a/drivers/media/platform/vsp1/vsp1_rpf.c +++ b/drivers/media/platform/vsp1/vsp1_rpf.c @@ -72,7 +72,8 @@ static void rpf_configure(struct vsp1_entity *entity, } if (params == VSP1_ENTITY_PARAMS_PARTITION) { - unsigned int offsets[2]; + struct vsp1_device *vsp1 = rpf->entity.vsp1; + struct vsp1_rwpf_memory mem = rpf->mem; struct v4l2_rect crop; /* @@ -105,7 +106,7 @@ static void rpf_configure(struct vsp1_entity *entity, * of the pipeline. */ output = vsp1_entity_get_pad_format(wpf, wpf->config, - RWPF_PAD_SOURCE); + RWPF_PAD_SINK); crop.width = pipe->partition.width * input_width / output->width; @@ -120,22 +121,30 @@ static void rpf_configure(struct vsp1_entity *entity, (crop.width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) | (crop.height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT)); - offsets[0] = crop.top * format->plane_fmt[0].bytesperline - + crop.left * fmtinfo->bpp[0] / 8; - - if (format->num_planes > 1) - offsets[1] = crop.top * format->plane_fmt[1].bytesperline - + crop.left / fmtinfo->hsub - * fmtinfo->bpp[1] / 8; - else - offsets[1] = 0; - - vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_Y, - rpf->mem.addr[0] + offsets[0]); - vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C0, - rpf->mem.addr[1] + offsets[1]); - vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C1, - rpf->mem.addr[2] + offsets[1]); + mem.addr[0] += crop.top * format->plane_fmt[0].bytesperline + + crop.left * fmtinfo->bpp[0] / 8; + + if (format->num_planes > 1) { + unsigned int offset; + + offset = crop.top * format->plane_fmt[1].bytesperline + + crop.left / fmtinfo->hsub + * fmtinfo->bpp[1] / 8; + mem.addr[1] += offset; + mem.addr[2] += offset; + } + + /* + * On Gen3 hardware the SPUVS bit has no effect on 3-planar + * formats. Swap the U and V planes manually in that case. + */ + if (vsp1->info->gen == 3 && format->num_planes == 3 && + fmtinfo->swap_uv) + swap(mem.addr[1], mem.addr[2]); + + vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]); + vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]); + vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]); return; } @@ -186,7 +195,8 @@ static void rpf_configure(struct vsp1_entity *entity, (left << VI6_RPF_LOC_HCOORD_SHIFT) | (top << VI6_RPF_LOC_VCOORD_SHIFT)); - /* On Gen2 use the alpha channel (extended to 8 bits) when available or + /* + * On Gen2 use the alpha channel (extended to 8 bits) when available or * a fixed alpha value set through the V4L2_CID_ALPHA_COMPONENT control * otherwise. * @@ -216,7 +226,8 @@ static void rpf_configure(struct vsp1_entity *entity, u32 mult; if (fmtinfo->alpha) { - /* When the input contains an alpha channel enable the + /* + * When the input contains an alpha channel enable the * alpha multiplier. If the input is premultiplied we * need to multiply both the alpha channel and the pixel * components by the global alpha value to keep them @@ -231,7 +242,8 @@ static void rpf_configure(struct vsp1_entity *entity, VI6_RPF_MULT_ALPHA_P_MMD_RATIO : VI6_RPF_MULT_ALPHA_P_MMD_NONE); } else { - /* When the input doesn't contain an alpha channel the + /* + * When the input doesn't contain an alpha channel the * global alpha value is applied in the unpacking unit, * the alpha multiplier isn't needed and must be * disabled. diff --git a/drivers/media/platform/vsp1/vsp1_rwpf.c b/drivers/media/platform/vsp1/vsp1_rwpf.c index 04104ef28fb5..cfd8f1904fa6 100644 --- a/drivers/media/platform/vsp1/vsp1_rwpf.c +++ b/drivers/media/platform/vsp1/vsp1_rwpf.c @@ -86,7 +86,8 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev, format = vsp1_entity_get_pad_format(&rwpf->entity, config, fmt->pad); if (fmt->pad == RWPF_PAD_SOURCE) { - /* The RWPF performs format conversion but can't scale, only the + /* + * The RWPF performs format conversion but can't scale, only the * format code can be changed on the source pad. */ format->code = fmt->format.code; @@ -120,6 +121,11 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev, RWPF_PAD_SOURCE); *format = fmt->format; + if (rwpf->flip.rotate) { + format->width = fmt->format.height; + format->height = fmt->format.width; + } + done: mutex_unlock(&rwpf->entity.lock); return ret; @@ -205,7 +211,8 @@ static int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev, format = vsp1_entity_get_pad_format(&rwpf->entity, config, RWPF_PAD_SINK); - /* Restrict the crop rectangle coordinates to multiples of 2 to avoid + /* + * Restrict the crop rectangle coordinates to multiples of 2 to avoid * shifting the color plane. */ if (format->code == MEDIA_BUS_FMT_AYUV8_1X32) { diff --git a/drivers/media/platform/vsp1/vsp1_rwpf.h b/drivers/media/platform/vsp1/vsp1_rwpf.h index 1c98aff3da5d..58215a7ab631 100644 --- a/drivers/media/platform/vsp1/vsp1_rwpf.h +++ b/drivers/media/platform/vsp1/vsp1_rwpf.h @@ -56,9 +56,14 @@ struct vsp1_rwpf { struct { spinlock_t lock; - struct v4l2_ctrl *ctrls[2]; + struct { + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *rotate; + } ctrls; unsigned int pending; unsigned int active; + bool rotate; } flip; struct vsp1_rwpf_memory mem; diff --git a/drivers/media/platform/vsp1/vsp1_sru.c b/drivers/media/platform/vsp1/vsp1_sru.c index b4e568a3b4ed..30142793dfcd 100644 --- a/drivers/media/platform/vsp1/vsp1_sru.c +++ b/drivers/media/platform/vsp1/vsp1_sru.c @@ -191,7 +191,8 @@ static void sru_try_format(struct vsp1_sru *sru, SRU_PAD_SINK); fmt->code = format->code; - /* We can upscale by 2 in both direction, but not independently. + /* + * We can upscale by 2 in both direction, but not independently. * Compare the input and output rectangles areas (avoiding * integer overflows on the output): if the requested output * area is larger than 1.5^2 the input area upscale by two, diff --git a/drivers/media/platform/vsp1/vsp1_uds.c b/drivers/media/platform/vsp1/vsp1_uds.c index da8f89a31ea4..4226403ad235 100644 --- a/drivers/media/platform/vsp1/vsp1_uds.c +++ b/drivers/media/platform/vsp1/vsp1_uds.c @@ -293,7 +293,8 @@ static void uds_configure(struct vsp1_entity *entity, dev_dbg(uds->entity.vsp1->dev, "hscale %u vscale %u\n", hscale, vscale); - /* Multi-tap scaling can't be enabled along with alpha scaling when + /* + * Multi-tap scaling can't be enabled along with alpha scaling when * scaling down with a factor lower than or equal to 1/2 in either * direction. */ diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c index 3eaadbf7a876..eab3c3ea85d7 100644 --- a/drivers/media/platform/vsp1/vsp1_video.c +++ b/drivers/media/platform/vsp1/vsp1_video.c @@ -31,6 +31,8 @@ #include "vsp1_bru.h" #include "vsp1_dl.h" #include "vsp1_entity.h" +#include "vsp1_hgo.h" +#include "vsp1_hgt.h" #include "vsp1_pipe.h" #include "vsp1_rwpf.h" #include "vsp1_uds.h" @@ -103,7 +105,8 @@ static int __vsp1_video_try_format(struct vsp1_video *video, unsigned int height = pix->height; unsigned int i; - /* Backward compatibility: replace deprecated RGB formats by their XRGB + /* + * Backward compatibility: replace deprecated RGB formats by their XRGB * equivalent. This selects the format older userspace applications want * while still exposing the new format. */ @@ -114,7 +117,8 @@ static int __vsp1_video_try_format(struct vsp1_video *video, } } - /* Retrieve format information and select the default format if the + /* + * Retrieve format information and select the default format if the * requested format isn't supported. */ info = vsp1_get_format_info(video->vsp1, pix->pixelformat); @@ -140,7 +144,8 @@ static int __vsp1_video_try_format(struct vsp1_video *video, pix->height = clamp(height, VSP1_VIDEO_MIN_HEIGHT, VSP1_VIDEO_MAX_HEIGHT); - /* Compute and clamp the stride and image size. While not documented in + /* + * Compute and clamp the stride and image size. While not documented in * the datasheet, strides not aligned to a multiple of 128 bytes result * in image corruption. */ @@ -184,9 +189,13 @@ static void vsp1_video_pipeline_setup_partitions(struct vsp1_pipeline *pipe) struct vsp1_entity *entity; unsigned int div_size; + /* + * Partitions are computed on the size before rotation, use the format + * at the WPF sink. + */ format = vsp1_entity_get_pad_format(&pipe->output->entity, pipe->output->entity.config, - RWPF_PAD_SOURCE); + RWPF_PAD_SINK); div_size = format->width; /* Gen2 hardware doesn't require image partitioning. */ @@ -226,9 +235,13 @@ static struct v4l2_rect vsp1_video_partition(struct vsp1_pipeline *pipe, struct v4l2_rect partition; unsigned int modulus; + /* + * Partitions are computed on the size before rotation, use the format + * at the WPF sink. + */ format = vsp1_entity_get_pad_format(&pipe->output->entity, pipe->output->entity.config, - RWPF_PAD_SOURCE); + RWPF_PAD_SINK); /* A single partition simply processes the output size in full. */ if (pipe->partitions <= 1) { @@ -449,7 +462,8 @@ static void vsp1_video_pipeline_frame_end(struct vsp1_pipeline *pipe) state = pipe->state; pipe->state = VSP1_PIPELINE_STOPPED; - /* If a stop has been requested, mark the pipeline as stopped and + /* + * If a stop has been requested, mark the pipeline as stopped and * return. Otherwise restart the pipeline if ready. */ if (state == VSP1_PIPELINE_STOPPING) @@ -474,7 +488,12 @@ static int vsp1_video_pipeline_build_branch(struct vsp1_pipeline *pipe, if (ret < 0) return ret; - pad = media_entity_remote_pad(&input->entity.pads[RWPF_PAD_SOURCE]); + /* + * The main data path doesn't include the HGO or HGT, use + * vsp1_entity_remote_pad() to traverse the graph. + */ + + pad = vsp1_entity_remote_pad(&input->entity.pads[RWPF_PAD_SOURCE]); while (1) { if (pad == NULL) { @@ -491,7 +510,8 @@ static int vsp1_video_pipeline_build_branch(struct vsp1_pipeline *pipe, entity = to_vsp1_entity( media_entity_to_v4l2_subdev(pad->entity)); - /* A BRU is present in the pipeline, store the BRU input pad + /* + * A BRU is present in the pipeline, store the BRU input pad * number in the input RPF for use when configuring the RPF. */ if (entity->type == VSP1_ENTITY_BRU) { @@ -526,13 +546,9 @@ static int vsp1_video_pipeline_build_branch(struct vsp1_pipeline *pipe, : &input->entity; } - /* Follow the source link. The link setup operations ensure - * that the output fan-out can't be more than one, there is thus - * no need to verify here that only a single source link is - * activated. - */ + /* Follow the source link, ignoring any HGO or HGT. */ pad = &entity->pads[entity->source_pad]; - pad = media_entity_remote_pad(pad); + pad = vsp1_entity_remote_pad(pad); } /* The last entity must be the output WPF. */ @@ -587,6 +603,16 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe, pipe->lif = e; } else if (e->type == VSP1_ENTITY_BRU) { pipe->bru = e; + } else if (e->type == VSP1_ENTITY_HGO) { + struct vsp1_hgo *hgo = to_hgo(subdev); + + pipe->hgo = e; + hgo->histo.pipe = pipe; + } else if (e->type == VSP1_ENTITY_HGT) { + struct vsp1_hgt *hgt = to_hgt(subdev); + + pipe->hgt = e; + hgt->histo.pipe = pipe; } } @@ -596,7 +622,8 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe, if (pipe->num_inputs == 0 || !pipe->output) return -EPIPE; - /* Follow links downstream for each input and make sure the graph + /* + * Follow links downstream for each input and make sure the graph * contains no loop and that all branches end at the output WPF. */ for (i = 0; i < video->vsp1->info->rpf_count; ++i) { @@ -627,7 +654,8 @@ static struct vsp1_pipeline *vsp1_video_pipeline_get(struct vsp1_video *video) struct vsp1_pipeline *pipe; int ret; - /* Get a pipeline object for the video node. If a pipeline has already + /* + * Get a pipeline object for the video node. If a pipeline has already * been allocated just increment its reference count and return it. * Otherwise allocate a new pipeline and initialize it, it will be freed * when the last reference is released. @@ -767,7 +795,8 @@ static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe) if (pipe->uds) { struct vsp1_uds *uds = to_uds(&pipe->uds->subdev); - /* If a BRU is present in the pipeline before the UDS, the alpha + /* + * If a BRU is present in the pipeline before the UDS, the alpha * component doesn't need to be scaled as the BRU output alpha * value is fixed to 255. Otherwise we need to scale the alpha * component only when available at the input RPF. @@ -783,7 +812,7 @@ static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe) } list_for_each_entry(entity, &pipe->entities, list_pipe) { - vsp1_entity_route_setup(entity, pipe->dl); + vsp1_entity_route_setup(entity, pipe, pipe->dl); if (entity->ops->configure) entity->ops->configure(entity, pipe, pipe->dl, @@ -797,6 +826,7 @@ static int vsp1_video_start_streaming(struct vb2_queue *vq, unsigned int count) { struct vsp1_video *video = vb2_get_drv_priv(vq); struct vsp1_pipeline *pipe = video->rwpf->pipe; + bool start_pipeline = false; unsigned long flags; int ret; @@ -807,11 +837,23 @@ static int vsp1_video_start_streaming(struct vb2_queue *vq, unsigned int count) mutex_unlock(&pipe->lock); return ret; } + + start_pipeline = true; } pipe->stream_count++; mutex_unlock(&pipe->lock); + /* + * vsp1_pipeline_ready() is not sufficient to establish that all streams + * are prepared and the pipeline is configured, as multiple streams + * can race through streamon with buffers already queued; Therefore we + * don't even attempt to start the pipeline until the last stream has + * called through here. + */ + if (!start_pipeline) + return 0; + spin_lock_irqsave(&pipe->irqlock, flags); if (vsp1_pipeline_ready(pipe)) vsp1_video_pipeline_run(pipe); @@ -968,7 +1010,8 @@ vsp1_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) if (video->queue.owner && video->queue.owner != file->private_data) return -EBUSY; - /* Get a pipeline for the video node and start streaming on it. No link + /* + * Get a pipeline for the video node and start streaming on it. No link * touching an entity in the pipeline can be activated or deactivated * once streaming is started. */ @@ -988,7 +1031,8 @@ vsp1_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) mutex_unlock(&mdev->graph_mutex); - /* Verify that the configured format matches the output of the connected + /* + * Verify that the configured format matches the output of the connected * subdev. */ ret = vsp1_video_verify_format(video); @@ -1050,6 +1094,7 @@ static int vsp1_video_open(struct file *file) ret = vsp1_device_get(video->vsp1); if (ret < 0) { v4l2_fh_del(vfh); + v4l2_fh_exit(vfh); kfree(vfh); } diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c index 7c48f81cd5c1..32df109b119f 100644 --- a/drivers/media/platform/vsp1/vsp1_wpf.c +++ b/drivers/media/platform/vsp1/vsp1_wpf.c @@ -43,32 +43,90 @@ static inline void vsp1_wpf_write(struct vsp1_rwpf *wpf, enum wpf_flip_ctrl { WPF_CTRL_VFLIP = 0, WPF_CTRL_HFLIP = 1, - WPF_CTRL_MAX, }; +static int vsp1_wpf_set_rotation(struct vsp1_rwpf *wpf, unsigned int rotation) +{ + struct vsp1_video *video = wpf->video; + struct v4l2_mbus_framefmt *sink_format; + struct v4l2_mbus_framefmt *source_format; + bool rotate; + int ret = 0; + + /* + * Only consider the 0°/180° from/to 90°/270° modifications, the rest + * is taken care of by the flipping configuration. + */ + rotate = rotation == 90 || rotation == 270; + if (rotate == wpf->flip.rotate) + return 0; + + /* Changing rotation isn't allowed when buffers are allocated. */ + mutex_lock(&video->lock); + + if (vb2_is_busy(&video->queue)) { + ret = -EBUSY; + goto done; + } + + sink_format = vsp1_entity_get_pad_format(&wpf->entity, + wpf->entity.config, + RWPF_PAD_SINK); + source_format = vsp1_entity_get_pad_format(&wpf->entity, + wpf->entity.config, + RWPF_PAD_SOURCE); + + mutex_lock(&wpf->entity.lock); + + if (rotate) { + source_format->width = sink_format->height; + source_format->height = sink_format->width; + } else { + source_format->width = sink_format->width; + source_format->height = sink_format->height; + } + + wpf->flip.rotate = rotate; + + mutex_unlock(&wpf->entity.lock); + +done: + mutex_unlock(&video->lock); + return ret; +} + static int vsp1_wpf_s_ctrl(struct v4l2_ctrl *ctrl) { struct vsp1_rwpf *wpf = container_of(ctrl->handler, struct vsp1_rwpf, ctrls); - unsigned int i; + unsigned int rotation; u32 flip = 0; + int ret; - switch (ctrl->id) { - case V4L2_CID_HFLIP: - case V4L2_CID_VFLIP: - for (i = 0; i < WPF_CTRL_MAX; ++i) { - if (wpf->flip.ctrls[i]) - flip |= wpf->flip.ctrls[i]->val ? BIT(i) : 0; - } + /* Update the rotation. */ + rotation = wpf->flip.ctrls.rotate ? wpf->flip.ctrls.rotate->val : 0; + ret = vsp1_wpf_set_rotation(wpf, rotation); + if (ret < 0) + return ret; - spin_lock_irq(&wpf->flip.lock); - wpf->flip.pending = flip; - spin_unlock_irq(&wpf->flip.lock); - break; + /* + * Compute the flip value resulting from all three controls, with + * rotation by 180° flipping the image in both directions. Store the + * result in the pending flip field for the next frame that will be + * processed. + */ + if (wpf->flip.ctrls.vflip->val) + flip |= BIT(WPF_CTRL_VFLIP); - default: - return -EINVAL; - } + if (wpf->flip.ctrls.hflip && wpf->flip.ctrls.hflip->val) + flip |= BIT(WPF_CTRL_HFLIP); + + if (rotation == 180 || rotation == 270) + flip ^= BIT(WPF_CTRL_VFLIP) | BIT(WPF_CTRL_HFLIP); + + spin_lock_irq(&wpf->flip.lock); + wpf->flip.pending = flip; + spin_unlock_irq(&wpf->flip.lock); return 0; } @@ -88,12 +146,14 @@ static int wpf_init_controls(struct vsp1_rwpf *wpf) /* Only WPF0 supports flipping. */ num_flip_ctrls = 0; } else if (vsp1->info->features & VSP1_HAS_WPF_HFLIP) { - /* When horizontal flip is supported the WPF implements two - * controls (horizontal flip and vertical flip). + /* + * When horizontal flip is supported the WPF implements three + * controls (horizontal flip, vertical flip and rotation). */ - num_flip_ctrls = 2; + num_flip_ctrls = 3; } else if (vsp1->info->features & VSP1_HAS_WPF_VFLIP) { - /* When only vertical flip is supported the WPF implements a + /* + * When only vertical flip is supported the WPF implements a * single control (vertical flip). */ num_flip_ctrls = 1; @@ -105,17 +165,19 @@ static int wpf_init_controls(struct vsp1_rwpf *wpf) vsp1_rwpf_init_ctrls(wpf, num_flip_ctrls); if (num_flip_ctrls >= 1) { - wpf->flip.ctrls[WPF_CTRL_VFLIP] = + wpf->flip.ctrls.vflip = v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); } - if (num_flip_ctrls == 2) { - wpf->flip.ctrls[WPF_CTRL_HFLIP] = + if (num_flip_ctrls == 3) { + wpf->flip.ctrls.hflip = v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0); - - v4l2_ctrl_cluster(2, wpf->flip.ctrls); + wpf->flip.ctrls.rotate = + v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops, + V4L2_CID_ROTATE, 0, 270, 90, 0); + v4l2_ctrl_cluster(3, &wpf->flip.ctrls.vflip); } if (wpf->ctrls.error) { @@ -139,7 +201,8 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int enable) if (enable) return 0; - /* Write to registers directly when stopping the stream as there will be + /* + * Write to registers directly when stopping the stream as there will be * no pipeline run to apply the display list. */ vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0); @@ -216,10 +279,11 @@ static void wpf_configure(struct vsp1_entity *entity, if (params == VSP1_ENTITY_PARAMS_PARTITION) { const struct v4l2_pix_format_mplane *format = &wpf->format; + const struct vsp1_format_info *fmtinfo = wpf->fmtinfo; struct vsp1_rwpf_memory mem = wpf->mem; unsigned int flip = wpf->flip.active; - unsigned int width = source_format->width; - unsigned int height = source_format->height; + unsigned int width = sink_format->width; + unsigned int height = sink_format->height; unsigned int offset; /* @@ -242,45 +306,86 @@ static void wpf_configure(struct vsp1_entity *entity, /* * Update the memory offsets based on flipping configuration. * The destination addresses point to the locations where the - * VSP starts writing to memory, which can be different corners - * of the image depending on vertical flipping. + * VSP starts writing to memory, which can be any corner of the + * image depending on the combination of flipping and rotation. */ - if (pipe->partitions > 1) { - const struct vsp1_format_info *fmtinfo = wpf->fmtinfo; - /* - * Horizontal flipping is handled through a line buffer - * and doesn't modify the start address, but still needs - * to be handled when image partitioning is in effect to - * order the partitions correctly. - */ - if (flip & BIT(WPF_CTRL_HFLIP)) - offset = format->width - pipe->partition.left - - pipe->partition.width; + /* + * First take the partition left coordinate into account. + * Compute the offset to order the partitions correctly on the + * output based on whether flipping is enabled. Consider + * horizontal flipping when rotation is disabled but vertical + * flipping when rotation is enabled, as rotating the image + * switches the horizontal and vertical directions. The offset + * is applied horizontally or vertically accordingly. + */ + if (flip & BIT(WPF_CTRL_HFLIP) && !wpf->flip.rotate) + offset = format->width - pipe->partition.left + - pipe->partition.width; + else if (flip & BIT(WPF_CTRL_VFLIP) && wpf->flip.rotate) + offset = format->height - pipe->partition.left + - pipe->partition.width; + else + offset = pipe->partition.left; + + for (i = 0; i < format->num_planes; ++i) { + unsigned int hsub = i > 0 ? fmtinfo->hsub : 1; + unsigned int vsub = i > 0 ? fmtinfo->vsub : 1; + + if (wpf->flip.rotate) + mem.addr[i] += offset / vsub + * format->plane_fmt[i].bytesperline; else - offset = pipe->partition.left; - - mem.addr[0] += offset * fmtinfo->bpp[0] / 8; - if (format->num_planes > 1) { - mem.addr[1] += offset / fmtinfo->hsub - * fmtinfo->bpp[1] / 8; - mem.addr[2] += offset / fmtinfo->hsub - * fmtinfo->bpp[2] / 8; - } + mem.addr[i] += offset / hsub + * fmtinfo->bpp[i] / 8; } if (flip & BIT(WPF_CTRL_VFLIP)) { - mem.addr[0] += (format->height - 1) + /* + * When rotating the output (after rotation) image + * height is equal to the partition width (before + * rotation). Otherwise it is equal to the output + * image height. + */ + if (wpf->flip.rotate) + height = pipe->partition.width; + else + height = format->height; + + mem.addr[0] += (height - 1) * format->plane_fmt[0].bytesperline; if (format->num_planes > 1) { - offset = (format->height / wpf->fmtinfo->vsub - 1) + offset = (height / fmtinfo->vsub - 1) * format->plane_fmt[1].bytesperline; mem.addr[1] += offset; mem.addr[2] += offset; } } + if (wpf->flip.rotate && !(flip & BIT(WPF_CTRL_HFLIP))) { + unsigned int hoffset = max(0, (int)format->width - 16); + + /* + * Compute the output coordinate. The partition + * horizontal (left) offset becomes a vertical offset. + */ + for (i = 0; i < format->num_planes; ++i) { + unsigned int hsub = i > 0 ? fmtinfo->hsub : 1; + + mem.addr[i] += hoffset / hsub + * fmtinfo->bpp[i] / 8; + } + } + + /* + * On Gen3 hardware the SPUVS bit has no effect on 3-planar + * formats. Swap the U and V planes manually in that case. + */ + if (vsp1->info->gen == 3 && format->num_planes == 3 && + fmtinfo->swap_uv) + swap(mem.addr[1], mem.addr[2]); + vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_Y, mem.addr[0]); vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C0, mem.addr[1]); vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C1, mem.addr[2]); @@ -294,6 +399,9 @@ static void wpf_configure(struct vsp1_entity *entity, outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT; + if (wpf->flip.rotate) + outfmt |= VI6_WPF_OUTFMT_ROT; + if (fmtinfo->alpha) outfmt |= VI6_WPF_OUTFMT_PXA; if (fmtinfo->swap_yc) @@ -327,7 +435,8 @@ static void wpf_configure(struct vsp1_entity *entity, vsp1_dl_list_write(dl, VI6_WPF_WRBCK_CTRL, 0); - /* Sources. If the pipeline has a single input and BRU is not used, + /* + * Sources. If the pipeline has a single input and BRU is not used, * configure it as the master layer. Otherwise configure all * inputs as sub-layers and select the virtual RPF as the master * layer. @@ -354,9 +463,18 @@ static void wpf_configure(struct vsp1_entity *entity, VI6_WFP_IRQ_ENB_DFEE); } +static unsigned int wpf_max_width(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe) +{ + struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev); + + return wpf->flip.rotate ? 256 : wpf->max_width; +} + static const struct vsp1_entity_operations wpf_entity_ops = { .destroy = vsp1_wpf_destroy, .configure = wpf_configure, + .max_width = wpf_max_width, }; /* ----------------------------------------------------------------------------- diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c index 60f026a58076..f4a53f1e856e 100644 --- a/drivers/media/radio/si4713/si4713.c +++ b/drivers/media/radio/si4713/si4713.c @@ -1656,9 +1656,18 @@ static const struct i2c_device_id si4713_id[] = { }; MODULE_DEVICE_TABLE(i2c, si4713_id); +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id si4713_of_match[] = { + { .compatible = "silabs,si4713" }, + { }, +}; +MODULE_DEVICE_TABLE(of, si4713_of_match); +#endif + static struct i2c_driver si4713_i2c_driver = { .driver = { .name = "si4713", + .of_match_table = of_match_ptr(si4713_of_match), }, .probe = si4713_probe, .remove = si4713_remove, diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c index 74a1b3ecb30a..588e2d61c3b4 100644 --- a/drivers/media/radio/wl128x/fmdrv_common.c +++ b/drivers/media/radio/wl128x/fmdrv_common.c @@ -1550,9 +1550,8 @@ int fmc_prepare(struct fmdev *fmdev) atomic_set(&fmdev->tx_cnt, 1); fmdev->resp_comp = NULL; - init_timer(&fmdev->irq_info.timer); - fmdev->irq_info.timer.function = &int_timeout_handler; - fmdev->irq_info.timer.data = (unsigned long)fmdev; + setup_timer(&fmdev->irq_info.timer, &int_timeout_handler, + (unsigned long)fmdev); /*TODO: add FM_STIC_EVENT later */ fmdev->irq_info.mask = FM_MAL_EVENT; diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index d1d3fd00ed89..e422f3d56f76 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -426,4 +426,13 @@ config IR_SERIAL_TRANSMITTER ---help--- Serial Port Transmitter support +config IR_SIR + tristate "Built-in SIR IrDA port" + depends on RC_CORE + ---help--- + Say Y if you want to use a IrDA SIR port Transceivers. + + To compile this driver as a module, choose M here: the module will + be called sir-ir. + endif #RC_DEVICES diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index 679aa0af85cd..245e2c2d0b22 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -39,4 +39,5 @@ obj-$(CONFIG_RC_ST) += st_rc.o obj-$(CONFIG_IR_SUNXI) += sunxi-cir.o obj-$(CONFIG_IR_IMG) += img-ir/ obj-$(CONFIG_IR_SERIAL) += serial_ir.o +obj-$(CONFIG_IR_SIR) += sir_ir.o obj-$(CONFIG_IR_MTK) += mtk-cir.o diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c index 4a4895e4d599..b4f773b9dc1d 100644 --- a/drivers/media/rc/gpio-ir-recv.c +++ b/drivers/media/rc/gpio-ir-recv.c @@ -158,7 +158,7 @@ static int gpio_ir_recv_probe(struct platform_device *pdev) rcdev->input_id.version = 0x0100; rcdev->dev.parent = &pdev->dev; rcdev->driver_name = GPIO_IR_DRIVER_NAME; - rcdev->min_timeout = 0; + rcdev->min_timeout = 1; rcdev->timeout = IR_DEFAULT_TIMEOUT; rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; if (pdata->allowed_protos) diff --git a/drivers/media/rc/igorplugusb.c b/drivers/media/rc/igorplugusb.c index 0f0ed4ea4d06..cb6d4f1247da 100644 --- a/drivers/media/rc/igorplugusb.c +++ b/drivers/media/rc/igorplugusb.c @@ -205,7 +205,7 @@ static int igorplugusb_probe(struct usb_interface *intf, rc->allowed_protocols = RC_BIT_ALL_IR_DECODER & ~(RC_BIT_NEC | RC_BIT_NECX | RC_BIT_NEC32 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE | - RC_BIT_SONY20 | RC_BIT_MCE_KBD | RC_BIT_SANYO); + RC_BIT_SONY20 | RC_BIT_SANYO); rc->priv = ir; rc->driver_name = DRIVER_NAME; diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 89823d24a384..3489010601b5 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -2412,9 +2412,8 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf, mutex_lock(&ictx->lock); if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) { - init_timer(&ictx->ttimer); - ictx->ttimer.data = (unsigned long)ictx; - ictx->ttimer.function = imon_touch_display_timeout; + setup_timer(&ictx->ttimer, imon_touch_display_timeout, + (unsigned long)ictx); } ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf)); diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c index 8517d5153fcf..de85f1d7ce43 100644 --- a/drivers/media/rc/ir-lirc-codec.c +++ b/drivers/media/rc/ir-lirc-codec.c @@ -139,7 +139,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, } if (!dev->tx_ir) { - ret = -ENOSYS; + ret = -EINVAL; goto out; } @@ -221,19 +221,19 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, /* TX settings */ case LIRC_SET_TRANSMITTER_MASK: if (!dev->s_tx_mask) - return -ENOSYS; + return -ENOTTY; return dev->s_tx_mask(dev, val); case LIRC_SET_SEND_CARRIER: if (!dev->s_tx_carrier) - return -ENOSYS; + return -ENOTTY; return dev->s_tx_carrier(dev, val); case LIRC_SET_SEND_DUTY_CYCLE: if (!dev->s_tx_duty_cycle) - return -ENOSYS; + return -ENOTTY; if (val <= 0 || val >= 100) return -EINVAL; @@ -243,7 +243,7 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, /* RX settings */ case LIRC_SET_REC_CARRIER: if (!dev->s_rx_carrier_range) - return -ENOSYS; + return -ENOTTY; if (val <= 0) return -EINVAL; @@ -253,6 +253,9 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, val); case LIRC_SET_REC_CARRIER_RANGE: + if (!dev->s_rx_carrier_range) + return -ENOTTY; + if (val <= 0) return -EINVAL; @@ -260,37 +263,40 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, return 0; case LIRC_GET_REC_RESOLUTION: + if (!dev->rx_resolution) + return -ENOTTY; + val = dev->rx_resolution; break; case LIRC_SET_WIDEBAND_RECEIVER: if (!dev->s_learning_mode) - return -ENOSYS; + return -ENOTTY; return dev->s_learning_mode(dev, !!val); case LIRC_SET_MEASURE_CARRIER_MODE: if (!dev->s_carrier_report) - return -ENOSYS; + return -ENOTTY; return dev->s_carrier_report(dev, !!val); /* Generic timeout support */ case LIRC_GET_MIN_TIMEOUT: if (!dev->max_timeout) - return -ENOSYS; + return -ENOTTY; val = DIV_ROUND_UP(dev->min_timeout, 1000); break; case LIRC_GET_MAX_TIMEOUT: if (!dev->max_timeout) - return -ENOSYS; + return -ENOTTY; val = dev->max_timeout / 1000; break; case LIRC_SET_REC_TIMEOUT: if (!dev->max_timeout) - return -ENOSYS; + return -ENOTTY; tmp = val * 1000; @@ -305,6 +311,9 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, break; case LIRC_SET_REC_TIMEOUT_REPORTS: + if (!dev->timeout) + return -ENOTTY; + lirc->send_timeout_reports = !!val; break; @@ -361,8 +370,11 @@ static int ir_lirc_register(struct rc_dev *dev) if (rc) goto rbuf_init_failed; - if (dev->driver_type != RC_DRIVER_IR_RAW_TX) + if (dev->driver_type != RC_DRIVER_IR_RAW_TX) { features |= LIRC_CAN_REC_MODE2; + if (dev->rx_resolution) + features |= LIRC_CAN_GET_REC_RESOLUTION; + } if (dev->tx_ir) { features |= LIRC_CAN_SEND_PULSE; if (dev->s_tx_mask) diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c index 5226d510e847..6a4d58b88d91 100644 --- a/drivers/media/rc/ir-mce_kbd-decoder.c +++ b/drivers/media/rc/ir-mce_kbd-decoder.c @@ -23,7 +23,7 @@ * - MCIR-2 29-bit IR signals used for mouse movement and buttons * - MCIR-2 32-bit IR signals used for standard keyboard keys * - * The media keys on the keyboard send RC-6 signals that are inditinguishable + * The media keys on the keyboard send RC-6 signals that are indistinguishable * from the keys of the same name on the stock MCE remote, and will be handled * by the standard RC-6 decoder, and be made available to the system via the * input device for the remote, rather than the keyboard/mouse one. @@ -339,6 +339,7 @@ again: } data->state = STATE_INACTIVE; + input_event(data->idev, EV_MSC, MSC_SCAN, scancode); input_sync(data->idev); return 0; } @@ -418,9 +419,53 @@ static int ir_mce_kbd_unregister(struct rc_dev *dev) return 0; } +static const struct ir_raw_timings_manchester ir_mce_kbd_timings = { + .leader = MCIR2_PREFIX_PULSE, + .invert = 1, + .clock = MCIR2_UNIT, + .trailer_space = MCIR2_UNIT * 10, +}; + +/** + * ir_mce_kbd_encode() - Encode a scancode as a stream of raw events + * + * @protocol: protocol to encode + * @scancode: scancode to encode + * @events: array of raw ir events to write into + * @max: maximum size of @events + * + * Returns: The number of events written. + * -ENOBUFS if there isn't enough space in the array to fit the + * encoding. In this case all @max events will have been written. + */ +static int ir_mce_kbd_encode(enum rc_type protocol, u32 scancode, + struct ir_raw_event *events, unsigned int max) +{ + struct ir_raw_event *e = events; + int len, ret; + u64 raw; + + if (protocol == RC_TYPE_MCIR2_KBD) { + raw = scancode | + ((u64)MCIR2_KEYBOARD_HEADER << MCIR2_KEYBOARD_NBITS); + len = MCIR2_KEYBOARD_NBITS + MCIR2_HEADER_NBITS + 1; + } else { + raw = scancode | + ((u64)MCIR2_MOUSE_HEADER << MCIR2_MOUSE_NBITS); + len = MCIR2_MOUSE_NBITS + MCIR2_HEADER_NBITS + 1; + } + + ret = ir_raw_gen_manchester(&e, max, &ir_mce_kbd_timings, len, raw); + if (ret < 0) + return ret; + + return e - events; +} + static struct ir_raw_handler mce_kbd_handler = { - .protocols = RC_BIT_MCE_KBD, + .protocols = RC_BIT_MCIR2_KBD | RC_BIT_MCIR2_MSE, .decode = ir_mce_kbd_decode, + .encode = ir_mce_kbd_encode, .raw_register = ir_mce_kbd_register, .raw_unregister = ir_mce_kbd_unregister, }; diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile index ffe9e612f8d6..2945f99907b5 100644 --- a/drivers/media/rc/keymaps/Makefile +++ b/drivers/media/rc/keymaps/Makefile @@ -57,7 +57,6 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-kworld-pc150u.o \ rc-kworld-plus-tv-analog.o \ rc-leadtek-y04g0051.o \ - rc-lirc.o \ rc-lme2510.o \ rc-manli.o \ rc-medion-x10.o \ diff --git a/drivers/media/rc/keymaps/rc-dvico-mce.c b/drivers/media/rc/keymaps/rc-dvico-mce.c index e5f098c50235..d1e861f4d095 100644 --- a/drivers/media/rc/keymaps/rc-dvico-mce.c +++ b/drivers/media/rc/keymaps/rc-dvico-mce.c @@ -12,58 +12,58 @@ #include <linux/module.h> static struct rc_map_table rc_map_dvico_mce_table[] = { - { 0xfe02, KEY_TV }, - { 0xfe0e, KEY_MP3 }, - { 0xfe1a, KEY_DVD }, - { 0xfe1e, KEY_FAVORITES }, - { 0xfe16, KEY_SETUP }, - { 0xfe46, KEY_POWER2 }, - { 0xfe0a, KEY_EPG }, - { 0xfe49, KEY_BACK }, - { 0xfe4d, KEY_MENU }, - { 0xfe51, KEY_UP }, - { 0xfe5b, KEY_LEFT }, - { 0xfe5f, KEY_RIGHT }, - { 0xfe53, KEY_DOWN }, - { 0xfe5e, KEY_OK }, - { 0xfe59, KEY_INFO }, - { 0xfe55, KEY_TAB }, - { 0xfe0f, KEY_PREVIOUSSONG },/* Replay */ - { 0xfe12, KEY_NEXTSONG }, /* Skip */ - { 0xfe42, KEY_ENTER }, /* Windows/Start */ - { 0xfe15, KEY_VOLUMEUP }, - { 0xfe05, KEY_VOLUMEDOWN }, - { 0xfe11, KEY_CHANNELUP }, - { 0xfe09, KEY_CHANNELDOWN }, - { 0xfe52, KEY_CAMERA }, - { 0xfe5a, KEY_TUNER }, /* Live */ - { 0xfe19, KEY_OPEN }, - { 0xfe0b, KEY_1 }, - { 0xfe17, KEY_2 }, - { 0xfe1b, KEY_3 }, - { 0xfe07, KEY_4 }, - { 0xfe50, KEY_5 }, - { 0xfe54, KEY_6 }, - { 0xfe48, KEY_7 }, - { 0xfe4c, KEY_8 }, - { 0xfe58, KEY_9 }, - { 0xfe13, KEY_ANGLE }, /* Aspect */ - { 0xfe03, KEY_0 }, - { 0xfe1f, KEY_ZOOM }, - { 0xfe43, KEY_REWIND }, - { 0xfe47, KEY_PLAYPAUSE }, - { 0xfe4f, KEY_FASTFORWARD }, - { 0xfe57, KEY_MUTE }, - { 0xfe0d, KEY_STOP }, - { 0xfe01, KEY_RECORD }, - { 0xfe4e, KEY_POWER }, + { 0x0102, KEY_TV }, + { 0x010e, KEY_MP3 }, + { 0x011a, KEY_DVD }, + { 0x011e, KEY_FAVORITES }, + { 0x0116, KEY_SETUP }, + { 0x0146, KEY_POWER2 }, + { 0x010a, KEY_EPG }, + { 0x0149, KEY_BACK }, + { 0x014d, KEY_MENU }, + { 0x0151, KEY_UP }, + { 0x015b, KEY_LEFT }, + { 0x015f, KEY_RIGHT }, + { 0x0153, KEY_DOWN }, + { 0x015e, KEY_OK }, + { 0x0159, KEY_INFO }, + { 0x0155, KEY_TAB }, + { 0x010f, KEY_PREVIOUSSONG },/* Replay */ + { 0x0112, KEY_NEXTSONG }, /* Skip */ + { 0x0142, KEY_ENTER }, /* Windows/Start */ + { 0x0115, KEY_VOLUMEUP }, + { 0x0105, KEY_VOLUMEDOWN }, + { 0x0111, KEY_CHANNELUP }, + { 0x0109, KEY_CHANNELDOWN }, + { 0x0152, KEY_CAMERA }, + { 0x015a, KEY_TUNER }, /* Live */ + { 0x0119, KEY_OPEN }, + { 0x010b, KEY_1 }, + { 0x0117, KEY_2 }, + { 0x011b, KEY_3 }, + { 0x0107, KEY_4 }, + { 0x0150, KEY_5 }, + { 0x0154, KEY_6 }, + { 0x0148, KEY_7 }, + { 0x014c, KEY_8 }, + { 0x0158, KEY_9 }, + { 0x0113, KEY_ANGLE }, /* Aspect */ + { 0x0103, KEY_0 }, + { 0x011f, KEY_ZOOM }, + { 0x0143, KEY_REWIND }, + { 0x0147, KEY_PLAYPAUSE }, + { 0x014f, KEY_FASTFORWARD }, + { 0x0157, KEY_MUTE }, + { 0x010d, KEY_STOP }, + { 0x0101, KEY_RECORD }, + { 0x014e, KEY_POWER }, }; static struct rc_map_list dvico_mce_map = { .map = { .scan = rc_map_dvico_mce_table, .size = ARRAY_SIZE(rc_map_dvico_mce_table), - .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .rc_type = RC_TYPE_NEC, .name = RC_MAP_DVICO_MCE, } }; diff --git a/drivers/media/rc/keymaps/rc-dvico-portable.c b/drivers/media/rc/keymaps/rc-dvico-portable.c index 94ceeee94b3f..ac4cb515cbf1 100644 --- a/drivers/media/rc/keymaps/rc-dvico-portable.c +++ b/drivers/media/rc/keymaps/rc-dvico-portable.c @@ -12,49 +12,49 @@ #include <linux/module.h> static struct rc_map_table rc_map_dvico_portable_table[] = { - { 0xfc02, KEY_SETUP }, /* Profile */ - { 0xfc43, KEY_POWER2 }, - { 0xfc06, KEY_EPG }, - { 0xfc5a, KEY_BACK }, - { 0xfc05, KEY_MENU }, - { 0xfc47, KEY_INFO }, - { 0xfc01, KEY_TAB }, - { 0xfc42, KEY_PREVIOUSSONG },/* Replay */ - { 0xfc49, KEY_VOLUMEUP }, - { 0xfc09, KEY_VOLUMEDOWN }, - { 0xfc54, KEY_CHANNELUP }, - { 0xfc0b, KEY_CHANNELDOWN }, - { 0xfc16, KEY_CAMERA }, - { 0xfc40, KEY_TUNER }, /* ATV/DTV */ - { 0xfc45, KEY_OPEN }, - { 0xfc19, KEY_1 }, - { 0xfc18, KEY_2 }, - { 0xfc1b, KEY_3 }, - { 0xfc1a, KEY_4 }, - { 0xfc58, KEY_5 }, - { 0xfc59, KEY_6 }, - { 0xfc15, KEY_7 }, - { 0xfc14, KEY_8 }, - { 0xfc17, KEY_9 }, - { 0xfc44, KEY_ANGLE }, /* Aspect */ - { 0xfc55, KEY_0 }, - { 0xfc07, KEY_ZOOM }, - { 0xfc0a, KEY_REWIND }, - { 0xfc08, KEY_PLAYPAUSE }, - { 0xfc4b, KEY_FASTFORWARD }, - { 0xfc5b, KEY_MUTE }, - { 0xfc04, KEY_STOP }, - { 0xfc56, KEY_RECORD }, - { 0xfc57, KEY_POWER }, - { 0xfc41, KEY_UNKNOWN }, /* INPUT */ - { 0xfc00, KEY_UNKNOWN }, /* HD */ + { 0x0302, KEY_SETUP }, /* Profile */ + { 0x0343, KEY_POWER2 }, + { 0x0306, KEY_EPG }, + { 0x035a, KEY_BACK }, + { 0x0305, KEY_MENU }, + { 0x0347, KEY_INFO }, + { 0x0301, KEY_TAB }, + { 0x0342, KEY_PREVIOUSSONG },/* Replay */ + { 0x0349, KEY_VOLUMEUP }, + { 0x0309, KEY_VOLUMEDOWN }, + { 0x0354, KEY_CHANNELUP }, + { 0x030b, KEY_CHANNELDOWN }, + { 0x0316, KEY_CAMERA }, + { 0x0340, KEY_TUNER }, /* ATV/DTV */ + { 0x0345, KEY_OPEN }, + { 0x0319, KEY_1 }, + { 0x0318, KEY_2 }, + { 0x031b, KEY_3 }, + { 0x031a, KEY_4 }, + { 0x0358, KEY_5 }, + { 0x0359, KEY_6 }, + { 0x0315, KEY_7 }, + { 0x0314, KEY_8 }, + { 0x0317, KEY_9 }, + { 0x0344, KEY_ANGLE }, /* Aspect */ + { 0x0355, KEY_0 }, + { 0x0307, KEY_ZOOM }, + { 0x030a, KEY_REWIND }, + { 0x0308, KEY_PLAYPAUSE }, + { 0x034b, KEY_FASTFORWARD }, + { 0x035b, KEY_MUTE }, + { 0x0304, KEY_STOP }, + { 0x0356, KEY_RECORD }, + { 0x0357, KEY_POWER }, + { 0x0341, KEY_UNKNOWN }, /* INPUT */ + { 0x0300, KEY_UNKNOWN }, /* HD */ }; static struct rc_map_list dvico_portable_map = { .map = { .scan = rc_map_dvico_portable_table, .size = ARRAY_SIZE(rc_map_dvico_portable_table), - .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .rc_type = RC_TYPE_NEC, .name = RC_MAP_DVICO_PORTABLE, } }; diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c deleted file mode 100644 index e172f5db5803..000000000000 --- a/drivers/media/rc/keymaps/rc-lirc.c +++ /dev/null @@ -1,42 +0,0 @@ -/* rc-lirc.c - Empty dummy keytable, for use when its preferred to pass - * all raw IR data to the lirc userspace decoder. - * - * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <media/rc-core.h> -#include <linux/module.h> - -static struct rc_map_table lirc[] = { - { }, -}; - -static struct rc_map_list lirc_map = { - .map = { - .scan = lirc, - .size = ARRAY_SIZE(lirc), - .rc_type = RC_TYPE_OTHER, - .name = RC_MAP_LIRC, - } -}; - -static int __init init_rc_map_lirc(void) -{ - return rc_map_register(&lirc_map); -} - -static void __exit exit_rc_map_lirc(void) -{ - rc_map_unregister(&lirc_map); -} - -module_init(init_rc_map_lirc) -module_exit(exit_rc_map_lirc) - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index 1688893a65bb..8d60c9f00df9 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -54,7 +54,8 @@ struct irctl { struct lirc_buffer *buf; unsigned int chunk_size; - struct cdev *cdev; + struct device dev; + struct cdev cdev; struct task_struct *task; long jiffies_to_wait; @@ -76,15 +77,21 @@ static void lirc_irctl_init(struct irctl *ir) ir->d.minor = NOPLUG; } -static void lirc_irctl_cleanup(struct irctl *ir) +static void lirc_release(struct device *ld) { - device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor)); + struct irctl *ir = container_of(ld, struct irctl, dev); + + put_device(ir->dev.parent); if (ir->buf != ir->d.rbuf) { lirc_buffer_free(ir->buf); kfree(ir->buf); } - ir->buf = NULL; + + mutex_lock(&lirc_dev_lock); + irctls[ir->d.minor] = NULL; + mutex_unlock(&lirc_dev_lock); + kfree(ir); } /* helper function @@ -157,32 +164,21 @@ static int lirc_cdev_add(struct irctl *ir) struct cdev *cdev; int retval; - cdev = cdev_alloc(); - if (!cdev) - return -ENOMEM; + cdev = &ir->cdev; if (d->fops) { - cdev->ops = d->fops; + cdev_init(cdev, d->fops); cdev->owner = d->owner; } else { - cdev->ops = &lirc_dev_fops; + cdev_init(cdev, &lirc_dev_fops); cdev->owner = THIS_MODULE; } retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor); if (retval) - goto err_out; - - retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1); - if (retval) - goto err_out; - - ir->cdev = cdev; - - return 0; + return retval; -err_out: - cdev_del(cdev); - return retval; + cdev->kobj.parent = &ir->dev.kobj; + return cdev_add(cdev, ir->dev.devt, 1); } static int lirc_allocate_buffer(struct irctl *ir) @@ -304,9 +300,12 @@ static int lirc_allocate_driver(struct lirc_driver *d) ir->d = *d; - device_create(lirc_class, ir->d.dev, - MKDEV(MAJOR(lirc_base_dev), ir->d.minor), NULL, - "lirc%u", ir->d.minor); + ir->dev.devt = MKDEV(MAJOR(lirc_base_dev), ir->d.minor); + ir->dev.class = lirc_class; + ir->dev.parent = d->dev; + ir->dev.release = lirc_release; + dev_set_name(&ir->dev, "lirc%d", ir->d.minor); + device_initialize(&ir->dev); if (d->sample_rate) { ir->jiffies_to_wait = HZ / d->sample_rate; @@ -329,14 +328,22 @@ static int lirc_allocate_driver(struct lirc_driver *d) goto out_sysfs; ir->attached = 1; + + err = device_add(&ir->dev); + if (err) + goto out_cdev; + mutex_unlock(&lirc_dev_lock); + get_device(ir->dev.parent); + dev_info(ir->d.dev, "lirc_dev: driver %s registered at minor = %d\n", ir->d.name, ir->d.minor); return minor; - +out_cdev: + cdev_del(&ir->cdev); out_sysfs: - device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor)); + put_device(&ir->dev); out_lock: mutex_unlock(&lirc_dev_lock); @@ -364,7 +371,6 @@ EXPORT_SYMBOL(lirc_register_driver); int lirc_unregister_driver(int minor) { struct irctl *ir; - struct cdev *cdev; if (minor < 0 || minor >= MAX_IRCTL_DEVICES) { pr_err("minor (%d) must be between 0 and %d!\n", @@ -378,8 +384,6 @@ int lirc_unregister_driver(int minor) return -ENOENT; } - cdev = ir->cdev; - mutex_lock(&lirc_dev_lock); if (ir->d.minor != minor) { @@ -401,22 +405,20 @@ int lirc_unregister_driver(int minor) dev_dbg(ir->d.dev, LOGHEAD "releasing opened driver\n", ir->d.name, ir->d.minor); wake_up_interruptible(&ir->buf->wait_poll); - mutex_lock(&ir->irctl_lock); + } - if (ir->d.set_use_dec) - ir->d.set_use_dec(ir->d.data); + mutex_lock(&ir->irctl_lock); - module_put(cdev->owner); - mutex_unlock(&ir->irctl_lock); - } else { - lirc_irctl_cleanup(ir); - cdev_del(cdev); - kfree(ir); - irctls[minor] = NULL; - } + if (ir->d.set_use_dec) + ir->d.set_use_dec(ir->d.data); + mutex_unlock(&ir->irctl_lock); mutex_unlock(&lirc_dev_lock); + device_del(&ir->dev); + cdev_del(&ir->cdev); + put_device(&ir->dev); + return 0; } EXPORT_SYMBOL(lirc_unregister_driver); @@ -424,7 +426,6 @@ EXPORT_SYMBOL(lirc_unregister_driver); int lirc_dev_fop_open(struct inode *inode, struct file *file) { struct irctl *ir; - struct cdev *cdev; int retval = 0; if (iminor(inode) >= MAX_IRCTL_DEVICES) { @@ -461,18 +462,14 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file) goto error; } - cdev = ir->cdev; - if (try_module_get(cdev->owner)) { - ir->open++; - if (ir->d.set_use_inc) - retval = ir->d.set_use_inc(ir->d.data); - - if (retval) { - module_put(cdev->owner); - ir->open--; - } else if (ir->buf) { + ir->open++; + if (ir->d.set_use_inc) + retval = ir->d.set_use_inc(ir->d.data); + if (retval) { + ir->open--; + } else { + if (ir->buf) lirc_buffer_clear(ir->buf); - } if (ir->task) wake_up_process(ir->task); } @@ -487,7 +484,6 @@ EXPORT_SYMBOL(lirc_dev_fop_open); int lirc_dev_fop_close(struct inode *inode, struct file *file) { struct irctl *ir = irctls[iminor(inode)]; - struct cdev *cdev; int ret; if (!ir) { @@ -495,25 +491,14 @@ int lirc_dev_fop_close(struct inode *inode, struct file *file) return -EINVAL; } - cdev = ir->cdev; - ret = mutex_lock_killable(&lirc_dev_lock); WARN_ON(ret); rc_close(ir->d.rdev); ir->open--; - if (ir->attached) { - if (ir->d.set_use_dec) - ir->d.set_use_dec(ir->d.data); - module_put(cdev->owner); - } else { - lirc_irctl_cleanup(ir); - cdev_del(cdev); - irctls[ir->d.minor] = NULL; - kfree(ir); - } - + if (ir->d.set_use_dec) + ir->d.set_use_dec(ir->d.data); if (!ret) mutex_unlock(&lirc_dev_lock); @@ -623,7 +608,7 @@ long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) result = put_user(ir->d.max_timeout, (__u32 __user *)arg); break; default: - result = -EINVAL; + result = -ENOTTY; } mutex_unlock(&ir->irctl_lock); @@ -780,15 +765,12 @@ static int __init lirc_dev_init(void) return retval; } - pr_info("IR Remote Control driver registered, major %d\n", MAJOR(lirc_base_dev)); return 0; } - - static void __exit lirc_dev_exit(void) { class_destroy(lirc_class); diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 238d8eaf7d94..93b16fe3ab38 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -1288,8 +1288,8 @@ static int mceusb_dev_probe(struct usb_interface *intf, } } } - if (ep_in == NULL) { - dev_dbg(&intf->dev, "inbound and/or endpoint not found"); + if (!ep_in || !ep_out) { + dev_dbg(&intf->dev, "required endpoints not found\n"); return -ENODEV; } diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h index a70a5c557434..0455b273c2fc 100644 --- a/drivers/media/rc/rc-core-priv.h +++ b/drivers/media/rc/rc-core-priv.h @@ -185,7 +185,7 @@ struct ir_raw_timings_manchester { int ir_raw_gen_manchester(struct ir_raw_event **ev, unsigned int max, const struct ir_raw_timings_manchester *timings, - unsigned int n, unsigned int data); + unsigned int n, u64 data); /** * ir_raw_gen_pulse_space() - generate pulse and space raw events. diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c index 7fa84b64a2ae..90f66dc7c0d7 100644 --- a/drivers/media/rc/rc-ir-raw.c +++ b/drivers/media/rc/rc-ir-raw.c @@ -258,13 +258,13 @@ static void ir_raw_disable_protocols(struct rc_dev *dev, u64 protocols) */ int ir_raw_gen_manchester(struct ir_raw_event **ev, unsigned int max, const struct ir_raw_timings_manchester *timings, - unsigned int n, unsigned int data) + unsigned int n, u64 data) { bool need_pulse; - unsigned int i; + u64 i; int ret = -ENOBUFS; - i = 1 << (n - 1); + i = BIT_ULL(n - 1); if (timings->leader) { if (!max--) diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index d84533699668..6ec73357fa47 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -746,6 +746,8 @@ static int rc_validate_filter(struct rc_dev *dev, [RC_TYPE_NECX] = 0xffffff, [RC_TYPE_NEC32] = 0xffffffff, [RC_TYPE_SANYO] = 0x1fffff, + [RC_TYPE_MCIR2_KBD] = 0xffff, + [RC_TYPE_MCIR2_MSE] = 0x1fffff, [RC_TYPE_RC6_0] = 0xffff, [RC_TYPE_RC6_6A_20] = 0xfffff, [RC_TYPE_RC6_6A_24] = 0xffffff, @@ -878,7 +880,8 @@ static const struct { { RC_BIT_RC5_SZ, "rc-5-sz", "ir-rc5-decoder" }, { RC_BIT_SANYO, "sanyo", "ir-sanyo-decoder" }, { RC_BIT_SHARP, "sharp", "ir-sharp-decoder" }, - { RC_BIT_MCE_KBD, "mce_kbd", "ir-mce_kbd-decoder" }, + { RC_BIT_MCIR2_KBD | + RC_BIT_MCIR2_MSE, "mce_kbd", "ir-mce_kbd-decoder" }, { RC_BIT_XMP, "xmp", "ir-xmp-decoder" }, { RC_BIT_CEC, "cec", NULL }, }; @@ -1346,7 +1349,8 @@ static const char * const proto_variant_names[] = { [RC_TYPE_NECX] = "nec-x", [RC_TYPE_NEC32] = "nec-32", [RC_TYPE_SANYO] = "sanyo", - [RC_TYPE_MCE_KBD] = "mce_kbd", + [RC_TYPE_MCIR2_KBD] = "mcir2-kbd", + [RC_TYPE_MCIR2_MSE] = "mcir2-mse", [RC_TYPE_RC6_0] = "rc-6-0", [RC_TYPE_RC6_6A_20] = "rc-6-6a-20", [RC_TYPE_RC6_6A_24] = "rc-6-6a-24", diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c index 41b54e40176c..2f0a0d248936 100644 --- a/drivers/media/rc/serial_ir.c +++ b/drivers/media/rc/serial_ir.c @@ -56,7 +56,7 @@ struct serial_ir_hw { static int type; static int io; static int irq; -static bool iommap; +static ulong iommap; static int ioshift; static bool softcarrier = true; static bool share_irq; @@ -837,7 +837,7 @@ module_param(io, int, 0444); MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); /* some architectures (e.g. intel xscale) have memory mapped registers */ -module_param(iommap, bool, 0444); +module_param(iommap, ulong, 0444); MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory mapped io)"); /* diff --git a/drivers/media/rc/sir_ir.c b/drivers/media/rc/sir_ir.c new file mode 100644 index 000000000000..e12ec50bf0bf --- /dev/null +++ b/drivers/media/rc/sir_ir.c @@ -0,0 +1,438 @@ +/* + * IR SIR driver, (C) 2000 Milan Pikula <www@fornax.sk> + * + * sir_ir - Device driver for use with SIR (serial infra red) + * mode of IrDA on many notebooks. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/serial_reg.h> +#include <linux/ktime.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + +#include <media/rc-core.h> + +/* SECTION: Definitions */ +#define PULSE '[' + +/* 9bit * 1s/115200bit in milli seconds = 78.125ms*/ +#define TIME_CONST (9000000ul / 115200ul) + +/* timeout for sequences in jiffies (=5/100s), must be longer than TIME_CONST */ +#define SIR_TIMEOUT (HZ * 5 / 100) + +/* onboard sir ports are typically com3 */ +static int io = 0x3e8; +static int irq = 4; +static int threshold = 3; + +static DEFINE_SPINLOCK(timer_lock); +static struct timer_list timerlist; +/* time of last signal change detected */ +static ktime_t last; +/* time of last UART data ready interrupt */ +static ktime_t last_intr_time; +static int last_value; +static struct rc_dev *rcdev; + +static struct platform_device *sir_ir_dev; + +static DEFINE_SPINLOCK(hardware_lock); + +/* SECTION: Prototypes */ + +/* Communication with user-space */ +static void add_read_queue(int flag, unsigned long val); +static int init_chrdev(void); +/* Hardware */ +static irqreturn_t sir_interrupt(int irq, void *dev_id); +static void send_space(unsigned long len); +static void send_pulse(unsigned long len); +static int init_hardware(void); +static void drop_hardware(void); +/* Initialisation */ +static int init_port(void); +static void drop_port(void); + +static inline unsigned int sinp(int offset) +{ + return inb(io + offset); +} + +static inline void soutp(int offset, int value) +{ + outb(value, io + offset); +} + +/* SECTION: Communication with user-space */ +static int sir_tx_ir(struct rc_dev *dev, unsigned int *tx_buf, + unsigned int count) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + for (i = 0; i < count;) { + if (tx_buf[i]) + send_pulse(tx_buf[i]); + i++; + if (i >= count) + break; + if (tx_buf[i]) + send_space(tx_buf[i]); + i++; + } + local_irq_restore(flags); + + return count; +} + +static void add_read_queue(int flag, unsigned long val) +{ + DEFINE_IR_RAW_EVENT(ev); + + pr_debug("add flag %d with val %lu\n", flag, val); + + /* + * statistically, pulses are ~TIME_CONST/2 too long. we could + * maybe make this more exact, but this is good enough + */ + if (flag) { + /* pulse */ + if (val > TIME_CONST / 2) + val -= TIME_CONST / 2; + else /* should not ever happen */ + val = 1; + ev.pulse = true; + } else { + val += TIME_CONST / 2; + } + ev.duration = US_TO_NS(val); + + ir_raw_event_store_with_filter(rcdev, &ev); +} + +static int init_chrdev(void) +{ + rcdev = devm_rc_allocate_device(&sir_ir_dev->dev, RC_DRIVER_IR_RAW); + if (!rcdev) + return -ENOMEM; + + rcdev->input_name = "SIR IrDA port"; + rcdev->input_phys = KBUILD_MODNAME "/input0"; + rcdev->input_id.bustype = BUS_HOST; + rcdev->input_id.vendor = 0x0001; + rcdev->input_id.product = 0x0001; + rcdev->input_id.version = 0x0100; + rcdev->tx_ir = sir_tx_ir; + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER; + rcdev->driver_name = KBUILD_MODNAME; + rcdev->map_name = RC_MAP_RC6_MCE; + rcdev->timeout = IR_DEFAULT_TIMEOUT; + rcdev->dev.parent = &sir_ir_dev->dev; + + return devm_rc_register_device(&sir_ir_dev->dev, rcdev); +} + +/* SECTION: Hardware */ +static void sir_timeout(unsigned long data) +{ + /* + * if last received signal was a pulse, but receiving stopped + * within the 9 bit frame, we need to finish this pulse and + * simulate a signal change to from pulse to space. Otherwise + * upper layers will receive two sequences next time. + */ + + unsigned long flags; + unsigned long pulse_end; + + /* avoid interference with interrupt */ + spin_lock_irqsave(&timer_lock, flags); + if (last_value) { + /* clear unread bits in UART and restart */ + outb(UART_FCR_CLEAR_RCVR, io + UART_FCR); + /* determine 'virtual' pulse end: */ + pulse_end = min_t(unsigned long, + ktime_us_delta(last, last_intr_time), + IR_MAX_DURATION); + dev_dbg(&sir_ir_dev->dev, "timeout add %d for %lu usec\n", + last_value, pulse_end); + add_read_queue(last_value, pulse_end); + last_value = 0; + last = last_intr_time; + } + spin_unlock_irqrestore(&timer_lock, flags); + ir_raw_event_handle(rcdev); +} + +static irqreturn_t sir_interrupt(int irq, void *dev_id) +{ + unsigned char data; + ktime_t curr_time; + static unsigned long delt; + unsigned long deltintr; + unsigned long flags; + int iir, lsr; + + while ((iir = inb(io + UART_IIR) & UART_IIR_ID)) { + switch (iir & UART_IIR_ID) { /* FIXME toto treba preriedit */ + case UART_IIR_MSI: + (void)inb(io + UART_MSR); + break; + case UART_IIR_RLSI: + case UART_IIR_THRI: + (void)inb(io + UART_LSR); + break; + case UART_IIR_RDI: + /* avoid interference with timer */ + spin_lock_irqsave(&timer_lock, flags); + do { + del_timer(&timerlist); + data = inb(io + UART_RX); + curr_time = ktime_get(); + delt = min_t(unsigned long, + ktime_us_delta(last, curr_time), + IR_MAX_DURATION); + deltintr = min_t(unsigned long, + ktime_us_delta(last_intr_time, + curr_time), + IR_MAX_DURATION); + dev_dbg(&sir_ir_dev->dev, "t %lu, d %d\n", + deltintr, (int)data); + /* + * if nothing came in last X cycles, + * it was gap + */ + if (deltintr > TIME_CONST * threshold) { + if (last_value) { + dev_dbg(&sir_ir_dev->dev, "GAP\n"); + /* simulate signal change */ + add_read_queue(last_value, + delt - + deltintr); + last_value = 0; + last = last_intr_time; + delt = deltintr; + } + } + data = 1; + if (data ^ last_value) { + /* + * deltintr > 2*TIME_CONST, remember? + * the other case is timeout + */ + add_read_queue(last_value, + delt - TIME_CONST); + last_value = data; + last = curr_time; + last = ktime_sub_us(last, + TIME_CONST); + } + last_intr_time = curr_time; + if (data) { + /* + * start timer for end of + * sequence detection + */ + timerlist.expires = jiffies + + SIR_TIMEOUT; + add_timer(&timerlist); + } + + lsr = inb(io + UART_LSR); + } while (lsr & UART_LSR_DR); /* data ready */ + spin_unlock_irqrestore(&timer_lock, flags); + break; + default: + break; + } + } + ir_raw_event_handle(rcdev); + return IRQ_RETVAL(IRQ_HANDLED); +} + +static void send_space(unsigned long len) +{ + usleep_range(len, len + 25); +} + +static void send_pulse(unsigned long len) +{ + long bytes_out = len / TIME_CONST; + + if (bytes_out == 0) + bytes_out++; + + while (bytes_out--) { + outb(PULSE, io + UART_TX); + /* FIXME treba seriozne cakanie z char/serial.c */ + while (!(inb(io + UART_LSR) & UART_LSR_THRE)) + ; + } +} + +static int init_hardware(void) +{ + unsigned long flags; + + spin_lock_irqsave(&hardware_lock, flags); + /* reset UART */ + outb(0, io + UART_MCR); + outb(0, io + UART_IER); + /* init UART */ + /* set DLAB, speed = 115200 */ + outb(UART_LCR_DLAB | UART_LCR_WLEN7, io + UART_LCR); + outb(1, io + UART_DLL); outb(0, io + UART_DLM); + /* 7N1+start = 9 bits at 115200 ~ 3 bits at 44000 */ + outb(UART_LCR_WLEN7, io + UART_LCR); + /* FIFO operation */ + outb(UART_FCR_ENABLE_FIFO, io + UART_FCR); + /* interrupts */ + /* outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, io + UART_IER); */ + outb(UART_IER_RDI, io + UART_IER); + /* turn on UART */ + outb(UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2, io + UART_MCR); + spin_unlock_irqrestore(&hardware_lock, flags); + return 0; +} + +static void drop_hardware(void) +{ + unsigned long flags; + + spin_lock_irqsave(&hardware_lock, flags); + + /* turn off interrupts */ + outb(0, io + UART_IER); + + spin_unlock_irqrestore(&hardware_lock, flags); +} + +/* SECTION: Initialisation */ + +static int init_port(void) +{ + int retval; + + setup_timer(&timerlist, sir_timeout, 0); + + /* get I/O port access and IRQ line */ + if (!request_region(io, 8, KBUILD_MODNAME)) { + pr_err("i/o port 0x%.4x already in use.\n", io); + return -EBUSY; + } + retval = request_irq(irq, sir_interrupt, 0, + KBUILD_MODNAME, NULL); + if (retval < 0) { + release_region(io, 8); + pr_err("IRQ %d already in use.\n", irq); + return retval; + } + pr_info("I/O port 0x%.4x, IRQ %d.\n", io, irq); + + return 0; +} + +static void drop_port(void) +{ + free_irq(irq, NULL); + del_timer_sync(&timerlist); + release_region(io, 8); +} + +static int init_sir_ir(void) +{ + int retval; + + retval = init_port(); + if (retval < 0) + return retval; + init_hardware(); + return 0; +} + +static int sir_ir_probe(struct platform_device *dev) +{ + int retval; + + retval = init_chrdev(); + if (retval < 0) + return retval; + + return init_sir_ir(); +} + +static int sir_ir_remove(struct platform_device *dev) +{ + return 0; +} + +static struct platform_driver sir_ir_driver = { + .probe = sir_ir_probe, + .remove = sir_ir_remove, + .driver = { + .name = "sir_ir", + }, +}; + +static int __init sir_ir_init(void) +{ + int retval; + + retval = platform_driver_register(&sir_ir_driver); + if (retval) + return retval; + + sir_ir_dev = platform_device_alloc("sir_ir", 0); + if (!sir_ir_dev) { + retval = -ENOMEM; + goto pdev_alloc_fail; + } + + retval = platform_device_add(sir_ir_dev); + if (retval) + goto pdev_add_fail; + + return 0; + +pdev_add_fail: + platform_device_put(sir_ir_dev); +pdev_alloc_fail: + platform_driver_unregister(&sir_ir_driver); + return retval; +} + +static void __exit sir_ir_exit(void) +{ + drop_hardware(); + drop_port(); + platform_device_unregister(sir_ir_dev); + platform_driver_unregister(&sir_ir_driver); +} + +module_init(sir_ir_init); +module_exit(sir_ir_exit); + +MODULE_DESCRIPTION("Infrared receiver driver for SIR type serial ports"); +MODULE_AUTHOR("Milan Pikula"); +MODULE_LICENSE("GPL"); + +module_param(io, int, 0444); +MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); + +module_param(irq, int, 0444); +MODULE_PARM_DESC(irq, "Interrupt (4 or 3)"); + +module_param(threshold, int, 0444); +MODULE_PARM_DESC(threshold, "space detection threshold (3)"); diff --git a/drivers/media/rc/st_rc.c b/drivers/media/rc/st_rc.c index f0d7190e3919..a08e1dd06124 100644 --- a/drivers/media/rc/st_rc.c +++ b/drivers/media/rc/st_rc.c @@ -165,8 +165,7 @@ static void st_rc_hardware_init(struct st_rc_device *dev) unsigned int rx_sampling_freq_div; /* Enable the IP */ - if (dev->rstc) - reset_control_deassert(dev->rstc); + reset_control_deassert(dev->rstc); clk_prepare_enable(dev->sys_clock); baseclock = clk_get_rate(dev->sys_clock); @@ -281,10 +280,11 @@ static int st_rc_probe(struct platform_device *pdev) else rc_dev->rx_base = rc_dev->base; - rc_dev->rstc = reset_control_get_optional(dev, NULL); - if (IS_ERR(rc_dev->rstc)) - rc_dev->rstc = NULL; + if (IS_ERR(rc_dev->rstc)) { + ret = PTR_ERR(rc_dev->rstc); + goto err; + } rc_dev->dev = dev; platform_set_drvdata(pdev, rc_dev); @@ -298,7 +298,7 @@ static int st_rc_probe(struct platform_device *pdev) rdev->open = st_rc_open; rdev->close = st_rc_close; rdev->driver_name = IR_ST_NAME; - rdev->map_name = RC_MAP_LIRC; + rdev->map_name = RC_MAP_EMPTY; rdev->input_name = "ST Remote Control Receiver"; ret = rc_register_device(rdev); @@ -352,8 +352,7 @@ static int st_rc_suspend(struct device *dev) writel(0x00, rc_dev->rx_base + IRB_RX_EN); writel(0x00, rc_dev->rx_base + IRB_RX_INT_EN); clk_disable_unprepare(rc_dev->sys_clock); - if (rc_dev->rstc) - reset_control_assert(rc_dev->rstc); + reset_control_assert(rc_dev->rstc); } return 0; diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c index 25b006167810..4b785dd775c1 100644 --- a/drivers/media/rc/sunxi-cir.c +++ b/drivers/media/rc/sunxi-cir.c @@ -174,16 +174,11 @@ static int sunxi_ir_probe(struct platform_device *pdev) /* Reset (optional) */ ir->rst = devm_reset_control_get_optional(dev, NULL); - if (IS_ERR(ir->rst)) { - ret = PTR_ERR(ir->rst); - if (ret == -EPROBE_DEFER) - return ret; - ir->rst = NULL; - } else { - ret = reset_control_deassert(ir->rst); - if (ret) - return ret; - } + if (IS_ERR(ir->rst)) + return PTR_ERR(ir->rst); + ret = reset_control_deassert(ir->rst); + if (ret) + return ret; ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK); if (ret) { @@ -291,8 +286,7 @@ exit_clkdisable_clk: exit_clkdisable_apb_clk: clk_disable_unprepare(ir->apb_clk); exit_reset_assert: - if (ir->rst) - reset_control_assert(ir->rst); + reset_control_assert(ir->rst); return ret; } @@ -304,8 +298,7 @@ static int sunxi_ir_remove(struct platform_device *pdev) clk_disable_unprepare(ir->clk); clk_disable_unprepare(ir->apb_clk); - if (ir->rst) - reset_control_assert(ir->rst); + reset_control_assert(ir->rst); spin_lock_irqsave(&ir->ir_lock, flags); /* disable IR IRQ */ diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index dc1c8305ad23..5a4d4a611197 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -1082,7 +1082,9 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) data->dev->tx_ir = wbcir_tx; data->dev->priv = data; data->dev->dev.parent = &device->dev; - data->dev->timeout = MS_TO_NS(100); + data->dev->min_timeout = 1; + data->dev->timeout = IR_DEFAULT_TIMEOUT; + data->dev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; data->dev->rx_resolution = US_TO_NS(2); data->dev->allowed_protocols = RC_BIT_ALL_IR_DECODER; data->dev->allowed_wakeup_protocols = RC_BIT_NEC | RC_BIT_NECX | diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c index 57b250847cd3..e35b1faf0ddc 100644 --- a/drivers/media/tuners/si2157.c +++ b/drivers/media/tuners/si2157.c @@ -106,6 +106,9 @@ static int si2157_init(struct dvb_frontend *fe) if (dev->chiptype == SI2157_CHIPTYPE_SI2146) { memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9); cmd.wlen = 9; + } else if (dev->chiptype == SI2157_CHIPTYPE_SI2141) { + memcpy(cmd.args, "\xc0\x00\x0d\x0e\x00\x01\x01\x01\x01\x03", 10); + cmd.wlen = 10; } else { memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15); cmd.wlen = 15; @@ -115,6 +118,15 @@ static int si2157_init(struct dvb_frontend *fe) if (ret) goto err; + /* Si2141 needs a second command before it answers the revision query */ + if (dev->chiptype == SI2157_CHIPTYPE_SI2141) { + memcpy(cmd.args, "\xc0\x08\x01\x02\x00\x00\x01", 7); + cmd.wlen = 7; + ret = si2157_cmd_execute(client, &cmd); + if (ret) + goto err; + } + /* query chip revision */ memcpy(cmd.args, "\x02", 1); cmd.wlen = 1; @@ -131,12 +143,16 @@ static int si2157_init(struct dvb_frontend *fe) #define SI2157_A30 ('A' << 24 | 57 << 16 | '3' << 8 | '0' << 0) #define SI2147_A30 ('A' << 24 | 47 << 16 | '3' << 8 | '0' << 0) #define SI2146_A10 ('A' << 24 | 46 << 16 | '1' << 8 | '0' << 0) + #define SI2141_A10 ('A' << 24 | 41 << 16 | '1' << 8 | '0' << 0) switch (chip_id) { case SI2158_A20: case SI2148_A20: fw_name = SI2158_A20_FIRMWARE; break; + case SI2141_A10: + fw_name = SI2141_A10_FIRMWARE; + break; case SI2157_A30: case SI2147_A30: case SI2146_A10: @@ -371,7 +387,7 @@ static int si2157_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) static const struct dvb_tuner_ops si2157_ops = { .info = { - .name = "Silicon Labs Si2146/2147/2148/2157/2158", + .name = "Silicon Labs Si2141/Si2146/2147/2148/2157/2158", .frequency_min = 42000000, .frequency_max = 870000000, }, @@ -471,6 +487,7 @@ static int si2157_probe(struct i2c_client *client, #endif dev_info(&client->dev, "Silicon Labs %s successfully attached\n", + dev->chiptype == SI2157_CHIPTYPE_SI2141 ? "Si2141" : dev->chiptype == SI2157_CHIPTYPE_SI2146 ? "Si2146" : "Si2147/2148/2157/2158"); @@ -508,6 +525,7 @@ static int si2157_remove(struct i2c_client *client) static const struct i2c_device_id si2157_id_table[] = { {"si2157", SI2157_CHIPTYPE_SI2157}, {"si2146", SI2157_CHIPTYPE_SI2146}, + {"si2141", SI2157_CHIPTYPE_SI2141}, {} }; MODULE_DEVICE_TABLE(i2c, si2157_id_table); @@ -524,7 +542,8 @@ static struct i2c_driver si2157_driver = { module_i2c_driver(si2157_driver); -MODULE_DESCRIPTION("Silicon Labs Si2146/2147/2148/2157/2158 silicon tuner driver"); +MODULE_DESCRIPTION("Silicon Labs Si2141/Si2146/2147/2148/2157/2158 silicon tuner driver"); MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); MODULE_LICENSE("GPL"); MODULE_FIRMWARE(SI2158_A20_FIRMWARE); +MODULE_FIRMWARE(SI2141_A10_FIRMWARE); diff --git a/drivers/media/tuners/si2157_priv.h b/drivers/media/tuners/si2157_priv.h index d6b2c7b44053..e6436f74abaa 100644 --- a/drivers/media/tuners/si2157_priv.h +++ b/drivers/media/tuners/si2157_priv.h @@ -42,6 +42,7 @@ struct si2157_dev { #define SI2157_CHIPTYPE_SI2157 0 #define SI2157_CHIPTYPE_SI2146 1 +#define SI2157_CHIPTYPE_SI2141 2 /* firmware command struct */ #define SI2157_ARGLEN 30 @@ -52,5 +53,6 @@ struct si2157_cmd { }; #define SI2158_A20_FIRMWARE "dvb-tuner-si2158-a20-01.fw" +#define SI2141_A10_FIRMWARE "dvb-tuner-si2141-a10-01.fw" #endif diff --git a/drivers/media/tuners/xc5000.c b/drivers/media/tuners/xc5000.c index 91947cf1950e..e823aafce276 100644 --- a/drivers/media/tuners/xc5000.c +++ b/drivers/media/tuners/xc5000.c @@ -1184,8 +1184,7 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe, int force) /* Start the tuner self-calibration process */ ret = xc_initialize(priv); if (ret) { - printk(KERN_ERR - "xc5000: Can't request Self-callibration."); + printk(KERN_ERR "xc5000: Can't request self-calibration."); continue; } diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig index c9644b62f91a..b24e753c4766 100644 --- a/drivers/media/usb/Kconfig +++ b/drivers/media/usb/Kconfig @@ -63,6 +63,7 @@ endif if MEDIA_CEC_SUPPORT comment "USB HDMI CEC adapters" source "drivers/media/usb/pulse8-cec/Kconfig" +source "drivers/media/usb/rainshadow-cec/Kconfig" endif endif #MEDIA_USB_SUPPORT diff --git a/drivers/media/usb/Makefile b/drivers/media/usb/Makefile index 0f15e3351ddc..738b993ec8b0 100644 --- a/drivers/media/usb/Makefile +++ b/drivers/media/usb/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_VIDEO_USBTV) += usbtv/ obj-$(CONFIG_VIDEO_GO7007) += go7007/ obj-$(CONFIG_DVB_AS102) += as102/ obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec/ +obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec/ diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index 313f659f0bfb..43bfa778b070 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -153,7 +153,7 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) { struct tveeprom tv; - tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data); + tveeprom_hauppauge_analog(&tv, eeprom_data); dev->board.tuner_type = tv.tuner_type; /* Make sure we support the board model */ diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c index 16f9125a985a..2a255bd32bb3 100644 --- a/drivers/media/usb/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -809,16 +809,9 @@ static void au0828_analog_stream_reset(struct au0828_dev *dev) */ static int au0828_stream_interrupt(struct au0828_dev *dev) { - int ret = 0; - dev->stream_state = STREAM_INTERRUPT; if (test_bit(DEV_DISCONNECTED, &dev->dev_state)) return -ENODEV; - else if (ret) { - set_bit(DEV_MISCONFIGURED, &dev->dev_state); - dprintk(1, "%s device is misconfigured!\n", __func__); - return ret; - } return 0; } diff --git a/drivers/media/usb/cx231xx/cx231xx-audio.c b/drivers/media/usb/cx231xx/cx231xx-audio.c index cf80842dfa08..a050d125934c 100644 --- a/drivers/media/usb/cx231xx/cx231xx-audio.c +++ b/drivers/media/usb/cx231xx/cx231xx-audio.c @@ -670,10 +670,8 @@ static int cx231xx_audio_init(struct cx231xx *dev) spin_lock_init(&adev->slock); err = snd_pcm_new(card, "Cx231xx Audio", 0, 0, 1, &pcm); - if (err < 0) { - snd_card_free(card); - return err; - } + if (err < 0) + goto err_free_card; snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx231xx_pcm_capture); @@ -687,10 +685,9 @@ static int cx231xx_audio_init(struct cx231xx *dev) INIT_WORK(&dev->wq_trigger, audio_trigger); err = snd_card_register(card); - if (err < 0) { - snd_card_free(card); - return err; - } + if (err < 0) + goto err_free_card; + adev->sndcard = card; adev->udev = dev->udev; @@ -700,6 +697,11 @@ static int cx231xx_audio_init(struct cx231xx *dev) hs_config_info[0].interface_info. audio_index + 1]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) { + err = -ENODEV; + goto err_free_card; + } + adev->end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc. bEndpointAddress; @@ -709,13 +711,20 @@ static int cx231xx_audio_init(struct cx231xx *dev) "audio EndPoint Addr 0x%x, Alternate settings: %i\n", adev->end_point_addr, adev->num_alt); adev->alt_max_pkt_size = kmalloc(32 * adev->num_alt, GFP_KERNEL); - - if (adev->alt_max_pkt_size == NULL) - return -ENOMEM; + if (!adev->alt_max_pkt_size) { + err = -ENOMEM; + goto err_free_card; + } for (i = 0; i < adev->num_alt; i++) { - u16 tmp = - le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) { + err = -ENODEV; + goto err_free_pkt_size; + } + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc. wMaxPacketSize); adev->alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); @@ -725,6 +734,13 @@ static int cx231xx_audio_init(struct cx231xx *dev) } return 0; + +err_free_pkt_size: + kfree(adev->alt_max_pkt_size); +err_free_card: + snd_card_free(card); + + return err; } static int cx231xx_audio_fini(struct cx231xx *dev) diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index f730fdbc9156..a1007d005290 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1165,8 +1165,7 @@ void cx231xx_card_setup(struct cx231xx *dev) e->client.addr = 0xa0 >> 1; read_eeprom(dev, &e->client, e->eeprom, sizeof(e->eeprom)); - tveeprom_hauppauge_analog(&e->client, - &e->tvee, e->eeprom + 0xc0); + tveeprom_hauppauge_analog(&e->tvee, e->eeprom + 0xc0); kfree(e); break; } @@ -1426,6 +1425,9 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, uif = udev->actconfig->interface[idx]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + dev->video_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress; dev->video_mode.num_alt = uif->num_altsetting; @@ -1439,7 +1441,12 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, return -ENOMEM; for (i = 0; i < dev->video_mode.num_alt; i++) { - u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize); + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize); dev->video_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); dev_dbg(dev->dev, "Alternate setting %i, max size= %i\n", i, @@ -1456,6 +1463,9 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, } uif = udev->actconfig->interface[idx]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + dev->vbi_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc. bEndpointAddress; @@ -1472,8 +1482,12 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, return -ENOMEM; for (i = 0; i < dev->vbi_mode.num_alt; i++) { - u16 tmp = - le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe]. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe]. desc.wMaxPacketSize); dev->vbi_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); @@ -1493,6 +1507,9 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, } uif = udev->actconfig->interface[idx]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + dev->sliced_cc_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc. bEndpointAddress; @@ -1507,7 +1524,12 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, return -ENOMEM; for (i = 0; i < dev->sliced_cc_mode.num_alt; i++) { - u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe]. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe]. desc.wMaxPacketSize); dev->sliced_cc_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); @@ -1676,6 +1698,11 @@ static int cx231xx_usb_probe(struct usb_interface *interface, } uif = udev->actconfig->interface[idx]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) { + retval = -ENODEV; + goto err_video_alt; + } + dev->ts1_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe]. desc.bEndpointAddress; @@ -1693,7 +1720,14 @@ static int cx231xx_usb_probe(struct usb_interface *interface, } for (i = 0; i < dev->ts1_mode.num_alt; i++) { - u16 tmp = le16_to_cpu(uif->altsetting[i]. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) { + retval = -ENODEV; + goto err_video_alt; + } + + tmp = le16_to_cpu(uif->altsetting[i]. endpoint[isoc_pipe].desc. wMaxPacketSize); dev->ts1_mode.alt_max_pkt_size[i] = diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c index dff514e147da..8d95b1154e12 100644 --- a/drivers/media/usb/cx231xx/cx231xx-i2c.c +++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c @@ -491,20 +491,24 @@ void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port) { unsigned char buf; int i, rc; - struct i2c_client client; + struct i2c_adapter *adap; + struct i2c_msg msg = { + .flags = I2C_M_RD, + .len = 1, + .buf = &buf, + }; if (!i2c_scan) return; /* Don't generate I2C errors during scan */ dev->i2c_scan_running = true; - - memset(&client, 0, sizeof(client)); - client.adapter = cx231xx_get_i2c_adap(dev, i2c_port); + adap = cx231xx_get_i2c_adap(dev, i2c_port); for (i = 0; i < 128; i++) { - client.addr = i; - rc = i2c_master_recv(&client, &buf, 0); + msg.addr = i; + rc = i2c_transfer(adap, &msg, 1); + if (rc < 0) continue; dev_info(dev->dev, diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index 80c635980526..abf69d8fa469 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -919,7 +919,12 @@ static int mxl111sf_init(struct dvb_usb_device *d) struct mxl111sf_state *state = d_to_priv(d); int ret; static u8 eeprom[256]; - struct i2c_client c; + u8 reg = 0; + struct i2c_msg msg[2] = { + { .addr = 0xa0 >> 1, .len = 1, .buf = ® }, + { .addr = 0xa0 >> 1, .flags = I2C_M_RD, + .len = sizeof(eeprom), .buf = eeprom }, + }; ret = get_chip_info(state); if (mxl_fail(ret)) @@ -930,14 +935,11 @@ static int mxl111sf_init(struct dvb_usb_device *d) if (state->chip_rev > MXL111SF_V6) mxl111sf_config_pin_mux_modes(state, PIN_MUX_TS_SPI_IN_MODE_1); - c.adapter = &d->i2c_adap; - c.addr = 0xa0 >> 1; - - ret = tveeprom_read(&c, eeprom, sizeof(eeprom)); + ret = i2c_transfer(&d->i2c_adap, msg, 2); if (mxl_fail(ret)) return 0; - tveeprom_hauppauge_analog(&c, &state->tv, (0x84 == eeprom[0xa0]) ? - eeprom + 0xa0 : eeprom + 0x80); + tveeprom_hauppauge_analog(&state->tv, (0x84 == eeprom[0xa0]) ? + eeprom + 0xa0 : eeprom + 0x80); #if 0 switch (state->tv.model) { case 117001: diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 51620e02292f..99a3f3625944 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -458,8 +458,8 @@ static int cxusb_rc_query(struct dvb_usb_device *d) cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4); if (ircode[2] || ircode[3]) - rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, - RC_SCANCODE_RC5(ircode[2], ircode[3]), 0); + rc_keydown(d->rc_dev, RC_TYPE_NEC, + RC_SCANCODE_NEC(~ircode[2] & 0xff, ircode[3]), 0); return 0; } @@ -473,8 +473,8 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d) return 0; if (ircode[1] || ircode[2]) - rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, - RC_SCANCODE_RC5(ircode[1], ircode[2]), 0); + rc_keydown(d->rc_dev, RC_TYPE_NEC, + RC_SCANCODE_NEC(~ircode[1] & 0xff, ircode[2]), 0); return 0; } @@ -1239,6 +1239,82 @@ static int cxusb_mygica_t230_frontend_attach(struct dvb_usb_adapter *adap) return 0; } +static int cxusb_mygica_t230c_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap->dev; + struct cxusb_state *st = d->priv; + struct i2c_adapter *adapter; + struct i2c_client *client_demod; + struct i2c_client *client_tuner; + struct i2c_board_info info; + struct si2168_config si2168_config; + struct si2157_config si2157_config; + + /* Select required USB configuration */ + if (usb_set_interface(d->udev, 0, 0) < 0) + err("set interface failed"); + + /* Unblock all USB pipes */ + usb_clear_halt(d->udev, + usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint)); + + /* attach frontend */ + memset(&si2168_config, 0, sizeof(si2168_config)); + si2168_config.i2c_adapter = &adapter; + si2168_config.fe = &adap->fe_adap[0].fe; + si2168_config.ts_mode = SI2168_TS_PARALLEL; + si2168_config.ts_clock_inv = 1; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "si2168", I2C_NAME_SIZE); + info.addr = 0x64; + info.platform_data = &si2168_config; + request_module(info.type); + client_demod = i2c_new_device(&d->i2c_adap, &info); + if (client_demod == NULL || client_demod->dev.driver == NULL) + return -ENODEV; + + if (!try_module_get(client_demod->dev.driver->owner)) { + i2c_unregister_device(client_demod); + return -ENODEV; + } + + /* attach tuner */ + memset(&si2157_config, 0, sizeof(si2157_config)); + si2157_config.fe = adap->fe_adap[0].fe; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "si2141", I2C_NAME_SIZE); + info.addr = 0x60; + info.platform_data = &si2157_config; + request_module("si2157"); + client_tuner = i2c_new_device(adapter, &info); + if (client_tuner == NULL || client_tuner->dev.driver == NULL) { + module_put(client_demod->dev.driver->owner); + i2c_unregister_device(client_demod); + return -ENODEV; + } + if (!try_module_get(client_tuner->dev.driver->owner)) { + i2c_unregister_device(client_tuner); + module_put(client_demod->dev.driver->owner); + i2c_unregister_device(client_demod); + return -ENODEV; + } + + st->i2c_client_demod = client_demod; + st->i2c_client_tuner = client_tuner; + + /* hook fe: need to resync the slave fifo when signal locks. */ + mutex_init(&st->stream_mutex); + st->last_lock = 0; + st->fe_read_status = adap->fe_adap[0].fe->ops.read_status; + adap->fe_adap[0].fe->ops.read_status = cxusb_read_status; + + return 0; +} + /* * DViCO has shipped two devices with the same USB ID, but only one of them * needs a firmware download. Check the device class details to see if they @@ -1321,6 +1397,7 @@ static struct dvb_usb_device_properties cxusb_aver_a868r_properties; static struct dvb_usb_device_properties cxusb_d680_dmb_properties; static struct dvb_usb_device_properties cxusb_mygica_d689_properties; static struct dvb_usb_device_properties cxusb_mygica_t230_properties; +static struct dvb_usb_device_properties cxusb_mygica_t230c_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -1353,6 +1430,8 @@ static int cxusb_probe(struct usb_interface *intf, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties, THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230c_properties, + THIS_MODULE, NULL, adapter_nr) || 0) return 0; @@ -1404,6 +1483,7 @@ enum cxusb_table_index { CONEXANT_D680_DMB, MYGICA_D689, MYGICA_T230, + MYGICA_T230C, NR__cxusb_table_index }; @@ -1471,6 +1551,9 @@ static struct usb_device_id cxusb_table[NR__cxusb_table_index + 1] = { [MYGICA_T230] = { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230) }, + [MYGICA_T230C] = { + USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230+1) + }, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, cxusb_table); @@ -1563,7 +1646,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = { .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .generic_bulk_ctrl_endpoint = 0x01, @@ -1620,7 +1703,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = { .rc_codes = RC_MAP_DVICO_MCE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .generic_bulk_ctrl_endpoint = 0x01, @@ -1685,7 +1768,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = { .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .generic_bulk_ctrl_endpoint = 0x01, @@ -1741,7 +1824,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = { .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .generic_bulk_ctrl_endpoint = 0x01, @@ -1796,7 +1879,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = { .rc_codes = RC_MAP_DVICO_MCE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_bluebird2_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .num_device_descs = 1, @@ -1850,7 +1933,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = { .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_bluebird2_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .num_device_descs = 1, @@ -1906,7 +1989,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .num_device_descs = 1, @@ -2005,7 +2088,7 @@ struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { .rc_codes = RC_MAP_DVICO_MCE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .num_device_descs = 1, @@ -2165,7 +2248,7 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties = { .rc.core = { .rc_interval = 100, - .rc_codes = RC_MAP_D680_DMB, + .rc_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02, .module_name = KBUILD_MODNAME, .rc_query = cxusb_d680_dmb_rc_query, .allowed_protos = RC_BIT_UNKNOWN, @@ -2181,6 +2264,60 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties = { } }; +static struct dvb_usb_device_properties cxusb_mygica_t230c_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_mygica_t230c_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + } }, + }, + }, + + .power_ctrl = cxusb_d680_dmb_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc.core = { + .rc_interval = 100, + .rc_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02, + .module_name = KBUILD_MODNAME, + .rc_query = cxusb_d680_dmb_rc_query, + .allowed_protos = RC_BIT_UNKNOWN, + }, + + .num_device_descs = 1, + .devices = { + { + "Mygica T230C DVB-T/T2/C", + { NULL }, + { &cxusb_table[MYGICA_T230C], NULL }, + }, + } +}; + static struct usb_driver cxusb_driver = { .name = "dvb_usb_cxusb", .probe = cxusb_probe, diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index dd5edd3a17ee..08acdd32e412 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -809,6 +809,9 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf) /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */ + if (intf->altsetting[0].desc.bNumEndpoints < rc_ep + 1) + return -ENODEV; + purb = usb_alloc_urb(0, GFP_KERNEL); if (purb == NULL) return -ENOMEM; diff --git a/drivers/media/usb/dvb-usb/dibusb-mc-common.c b/drivers/media/usb/dvb-usb/dibusb-mc-common.c index c989cac9343d..0c2bc97436d5 100644 --- a/drivers/media/usb/dvb-usb/dibusb-mc-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-mc-common.c @@ -11,6 +11,8 @@ #include "dibusb.h" +MODULE_LICENSE("GPL"); + /* 3000MC/P stuff */ // Config Adjacent channels Perf -cal22 static struct dibx000_agc_config dib3000p_mt2060_agc_config = { diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c index 4284f6984dc1..475a3c0cdee7 100644 --- a/drivers/media/usb/dvb-usb/digitv.c +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -33,6 +33,9 @@ static int digitv_ctrl_msg(struct dvb_usb_device *d, wo = (rbuf == NULL || rlen == 0); /* write-only */ + if (wlen > 4 || rlen > 4) + return -EIO; + memset(st->sndbuf, 0, 7); memset(st->rcvbuf, 0, 7); diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 4f42d57f81d9..6e654e5026dd 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -204,6 +204,20 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, switch (num) { case 2: + if (msg[0].len != 1) { + warn("i2c rd: len=%d is not 1!\n", + msg[0].len); + num = -EOPNOTSUPP; + break; + } + + if (2 + msg[1].len > sizeof(buf6)) { + warn("i2c rd: len=%d is too big!\n", + msg[1].len); + num = -EOPNOTSUPP; + break; + } + /* read si2109 register by number */ buf6[0] = msg[0].addr << 1; buf6[1] = msg[0].len; @@ -219,6 +233,13 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, case 1: switch (msg[0].addr) { case 0x68: + if (2 + msg[0].len > sizeof(buf6)) { + warn("i2c wr: len=%d is too big!\n", + msg[0].len); + num = -EOPNOTSUPP; + break; + } + /* write to si2109 register */ buf6[0] = msg[0].addr << 1; buf6[1] = msg[0].len; @@ -262,6 +283,13 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms /* first write first register number */ u8 ibuf[MAX_XFER_SIZE], obuf[3]; + if (2 + msg[0].len != sizeof(obuf)) { + warn("i2c rd: len=%d is not 1!\n", + msg[0].len); + ret = -EOPNOTSUPP; + goto unlock; + } + if (2 + msg[1].len > sizeof(ibuf)) { warn("i2c rd: len=%d is too big!\n", msg[1].len); @@ -462,6 +490,12 @@ static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], /* first write first register number */ u8 ibuf[MAX_XFER_SIZE], obuf[3]; + if (2 + msg[0].len != sizeof(obuf)) { + warn("i2c rd: len=%d is not 1!\n", + msg[0].len); + ret = -EOPNOTSUPP; + goto unlock; + } if (2 + msg[1].len > sizeof(ibuf)) { warn("i2c rd: len=%d is too big!\n", msg[1].len); @@ -696,6 +730,13 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], msg[0].buf[0] = state->data[1]; break; default: + if (3 + msg[0].len > sizeof(state->data)) { + warn("i2c wr: len=%d is too big!\n", + msg[0].len); + num = -EOPNOTSUPP; + break; + } + /* always i2c write*/ state->data[0] = 0x08; state->data[1] = msg[0].addr; @@ -711,6 +752,19 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], break; case 2: /* always i2c read */ + if (4 + msg[0].len > sizeof(state->data)) { + warn("i2c rd: len=%d is too big!\n", + msg[0].len); + num = -EOPNOTSUPP; + break; + } + if (1 + msg[1].len > sizeof(state->data)) { + warn("i2c rd: len=%d is too big!\n", + msg[1].len); + num = -EOPNOTSUPP; + break; + } + state->data[0] = 0x09; state->data[1] = msg[0].len; state->data[2] = msg[1].len; diff --git a/drivers/media/usb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c index ecc207fbaf3c..9e0d6a4166d2 100644 --- a/drivers/media/usb/dvb-usb/ttusb2.c +++ b/drivers/media/usb/dvb-usb/ttusb2.c @@ -78,6 +78,9 @@ static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd, u8 *s, *r = NULL; int ret = 0; + if (4 + rlen > 64) + return -EIO; + s = kzalloc(wlen+4, GFP_KERNEL); if (!s) return -ENOMEM; @@ -381,6 +384,22 @@ static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD); read = msg[i].flags & I2C_M_RD; + if (3 + msg[i].len > sizeof(obuf)) { + err("i2c wr len=%d too high", msg[i].len); + break; + } + if (write_read) { + if (3 + msg[i+1].len > sizeof(ibuf)) { + err("i2c rd len=%d too high", msg[i+1].len); + break; + } + } else if (read) { + if (3 + msg[i].len > sizeof(ibuf)) { + err("i2c rd len=%d too high", msg[i].len); + break; + } + } + obuf[0] = (msg[i].addr << 1) | (write_read | read); if (read) obuf[1] = 0; diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig index aa131cf9989b..4cc029f18aa8 100644 --- a/drivers/media/usb/em28xx/Kconfig +++ b/drivers/media/usb/em28xx/Kconfig @@ -12,7 +12,7 @@ config VIDEO_EM28XX_V4L2 select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT - + select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT ---help--- This is a video4linux driver for Empia 28xx based TV cards. @@ -39,6 +39,7 @@ config VIDEO_EM28XX_DVB depends on VIDEO_EM28XX && DVB_CORE select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT3306A if MEDIA_SUBDRV_AUTOSELECT select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT select DVB_S921 if MEDIA_SUBDRV_AUTOSELECT @@ -61,6 +62,10 @@ config VIDEO_EM28XX_DVB select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT select DVB_TC90522 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_QM1D1C0042 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT ---help--- This adds support for DVB cards based on the Empiatech em28xx chips. diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c index 89c890ba7dd6..ae87dd3e671f 100644 --- a/drivers/media/usb/em28xx/em28xx-camera.c +++ b/drivers/media/usb/em28xx/em28xx-camera.c @@ -23,9 +23,7 @@ #include <linux/i2c.h> #include <linux/usb.h> -#include <media/soc_camera.h> #include <media/i2c/mt9v011.h> -#include <media/v4l2-clk.h> #include <media/v4l2-common.h> /* Possible i2c addresses of Micron sensors */ @@ -43,13 +41,6 @@ static unsigned short omnivision_sensor_addrs[] = { I2C_CLIENT_END }; -static struct soc_camera_link camlink = { - .bus_id = 0, - .flags = 0, - .module_name = "em28xx", - .unbalanced_power = true, -}; - /* FIXME: Should be replaced by a proper mt9m111 driver */ static int em28xx_initialize_mt9m111(struct em28xx *dev) { @@ -106,55 +97,35 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) { int ret, i; char *name; - u8 reg; - __be16 id_be; u16 id; - struct i2c_client client = dev->i2c_client[dev->def_i2c_bus]; + struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus]; dev->em28xx_sensor = EM28XX_NOSENSOR; for (i = 0; micron_sensor_addrs[i] != I2C_CLIENT_END; i++) { - client.addr = micron_sensor_addrs[i]; - /* NOTE: i2c_smbus_read_word_data() doesn't work with BE data */ + client->addr = micron_sensor_addrs[i]; /* Read chip ID from register 0x00 */ - reg = 0x00; - ret = i2c_master_send(&client, ®, 1); + ret = i2c_smbus_read_word_data(client, 0x00); /* assumes LE */ if (ret < 0) { if (ret != -ENXIO) dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); - continue; - } - ret = i2c_master_recv(&client, (u8 *)&id_be, 2); - if (ret < 0) { - dev_err(&dev->intf->dev, - "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } - id = be16_to_cpu(id_be); + id = swab16(ret); /* LE -> BE */ /* Read chip ID from register 0xff */ - reg = 0xff; - ret = i2c_master_send(&client, ®, 1); + ret = i2c_smbus_read_word_data(client, 0xff); if (ret < 0) { dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); - continue; - } - ret = i2c_master_recv(&client, (u8 *)&id_be, 2); - if (ret < 0) { - dev_err(&dev->intf->dev, - "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } /* Validate chip ID to be sure we have a Micron device */ - if (id != be16_to_cpu(id_be)) + if (id != swab16(ret)) continue; /* Check chip ID */ - id = be16_to_cpu(id_be); switch (id) { case 0x1222: name = "MT9V012"; /* MI370 */ /* 640x480 */ @@ -197,7 +168,6 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) dev_info(&dev->intf->dev, "sensor %s detected\n", name); - dev->i2c_client[dev->def_i2c_bus].addr = client.addr; return 0; } @@ -213,30 +183,30 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) char *name; u8 reg; u16 id; - struct i2c_client client = dev->i2c_client[dev->def_i2c_bus]; + struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus]; dev->em28xx_sensor = EM28XX_NOSENSOR; /* NOTE: these devices have the register auto incrementation disabled * by default, so we have to use single byte reads ! */ for (i = 0; omnivision_sensor_addrs[i] != I2C_CLIENT_END; i++) { - client.addr = omnivision_sensor_addrs[i]; + client->addr = omnivision_sensor_addrs[i]; /* Read manufacturer ID from registers 0x1c-0x1d (BE) */ reg = 0x1c; - ret = i2c_smbus_read_byte_data(&client, reg); + ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) { if (ret != -ENXIO) dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } id = ret << 8; reg = 0x1d; - ret = i2c_smbus_read_byte_data(&client, reg); + ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) { dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } id += ret; @@ -245,20 +215,20 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) continue; /* Read product ID from registers 0x0a-0x0b (BE) */ reg = 0x0a; - ret = i2c_smbus_read_byte_data(&client, reg); + ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) { dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } id = ret << 8; reg = 0x0b; - ret = i2c_smbus_read_byte_data(&client, reg); + ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) { dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } id += ret; @@ -309,7 +279,6 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) dev_info(&dev->intf->dev, "sensor %s detected\n", name); - dev->i2c_client[dev->def_i2c_bus].addr = client.addr; return 0; } @@ -341,17 +310,9 @@ int em28xx_detect_sensor(struct em28xx *dev) int em28xx_init_camera(struct em28xx *dev) { - char clk_name[V4L2_CLK_NAME_SIZE]; struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus]; struct i2c_adapter *adap = &dev->i2c_adap[dev->def_i2c_bus]; struct em28xx_v4l2 *v4l2 = dev->v4l2; - int ret = 0; - - v4l2_clk_name_i2c(clk_name, sizeof(clk_name), - i2c_adapter_id(adap), client->addr); - v4l2->clk = v4l2_clk_register_fixed(clk_name, -EINVAL); - if (IS_ERR(v4l2->clk)) - return PTR_ERR(v4l2->clk); switch (dev->em28xx_sensor) { case EM28XX_MT9V011: @@ -381,12 +342,9 @@ int em28xx_init_camera(struct em28xx *dev) pdata.xtal = v4l2->sensor_xtal; if (NULL == v4l2_i2c_new_subdev_board(&v4l2->v4l2_dev, adap, - &mt9v011_info, NULL)) { - ret = -ENODEV; - break; - } - /* probably means GRGB 16 bit bayer */ - v4l2->vinmode = 0x0d; + &mt9v011_info, NULL)) + return -ENODEV; + v4l2->vinmode = EM28XX_VINMODE_RGB8_GRBG; v4l2->vinctl = 0x00; break; @@ -397,8 +355,7 @@ int em28xx_init_camera(struct em28xx *dev) em28xx_initialize_mt9m001(dev); - /* probably means BGGR 16 bit bayer */ - v4l2->vinmode = 0x0c; + v4l2->vinmode = EM28XX_VINMODE_RGB8_BGGR; v4l2->vinctl = 0x00; break; @@ -410,7 +367,7 @@ int em28xx_init_camera(struct em28xx *dev) em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk); em28xx_initialize_mt9m111(dev); - v4l2->vinmode = 0x0a; + v4l2->vinmode = EM28XX_VINMODE_YUV422_UYVY; v4l2->vinctl = 0x00; break; @@ -421,7 +378,6 @@ int em28xx_init_camera(struct em28xx *dev) .type = "ov2640", .flags = I2C_CLIENT_SCCB, .addr = client->addr, - .platform_data = &camlink, }; struct v4l2_subdev_format format = { .which = V4L2_SUBDEV_FORMAT_ACTIVE, @@ -441,10 +397,8 @@ int em28xx_init_camera(struct em28xx *dev) subdev = v4l2_i2c_new_subdev_board(&v4l2->v4l2_dev, adap, &ov2640_info, NULL); - if (NULL == subdev) { - ret = -ENODEV; - break; - } + if (subdev == NULL) + return -ENODEV; format.format.code = MEDIA_BUS_FMT_YUYV8_2X8; format.format.width = 640; @@ -454,21 +408,16 @@ int em28xx_init_camera(struct em28xx *dev) /* NOTE: for UXGA=1600x1200 switch to 12MHz */ dev->board.xclk = EM28XX_XCLK_FREQUENCY_24MHZ; em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk); - v4l2->vinmode = 0x08; + v4l2->vinmode = EM28XX_VINMODE_YUV422_YUYV; v4l2->vinctl = 0x00; break; } case EM28XX_NOSENSOR: default: - ret = -EINVAL; + return -EINVAL; } - if (ret < 0) { - v4l2_clk_unregister_fixed(v4l2->clk); - v4l2->clk = NULL; - } - - return ret; + return 0; } EXPORT_SYMBOL_GPL(em28xx_init_camera); diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index 5f90d0899a45..a12b599a1fa2 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -2600,6 +2600,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, { USB_DEVICE(0x3275, 0x0085), .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, + { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */ + .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -2917,7 +2919,9 @@ static void em28xx_card_setup(struct em28xx *dev) * If sensor is not found, then it isn't a webcam. */ if (dev->board.is_webcam) { - if (em28xx_detect_sensor(dev) < 0) + em28xx_detect_sensor(dev); + if (dev->em28xx_sensor == EM28XX_NOSENSOR) + /* NOTE: error/unknown sensor/no sensor */ dev->board.is_webcam = 0; } @@ -2974,8 +2978,7 @@ static void em28xx_card_setup(struct em28xx *dev) #endif /* Call first TVeeprom */ - dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; - tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); + tveeprom_hauppauge_analog(&tv, dev->eedata); dev->tuner_type = tv.tuner_type; @@ -3666,9 +3669,11 @@ static int em28xx_usb_probe(struct usb_interface *interface, try_bulk = usb_xfer_mode > 0; } - /* Disable V4L2 if the device doesn't have a decoder */ + /* Disable V4L2 if the device doesn't have a decoder or image sensor */ if (has_video && - dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) { + dev->board.decoder == EM28XX_NODECODER && + dev->em28xx_sensor == EM28XX_NOSENSOR) { + dev_err(&interface->dev, "Currently, V4L2 is not supported on this model\n"); has_video = false; diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h index afe7a66d7dc8..747525ca7ed5 100644 --- a/drivers/media/usb/em28xx/em28xx-reg.h +++ b/drivers/media/usb/em28xx/em28xx-reg.h @@ -93,6 +93,24 @@ #define EM28XX_XCLK_FREQUENCY_24MHZ 0x0b #define EM28XX_R10_VINMODE 0x10 + /* used by all non-camera devices: */ +#define EM28XX_VINMODE_YUV422_CbYCrY 0x10 + /* used by camera devices: */ +#define EM28XX_VINMODE_YUV422_YUYV 0x08 +#define EM28XX_VINMODE_YUV422_YVYU 0x09 +#define EM28XX_VINMODE_YUV422_UYVY 0x0a +#define EM28XX_VINMODE_YUV422_VYUY 0x0b +#define EM28XX_VINMODE_RGB8_BGGR 0x0c +#define EM28XX_VINMODE_RGB8_GRBG 0x0d +#define EM28XX_VINMODE_RGB8_GBRG 0x0e +#define EM28XX_VINMODE_RGB8_RGGB 0x0f + /* + * apparently: + * bit 0: swap component 1+2 with 3+4 + * => e.g.: YUYV => YVYU, BGGR => GRBG + * bit 1: swap component 1 with 2 and 3 with 4 + * => e.g.: YUYV => UYVY, BGGR => GBRG + */ #define EM28XX_R11_VINCTRL 0x11 diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c index 8d93100334ea..8d253a5df0a9 100644 --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -43,7 +43,6 @@ #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-event.h> -#include <media/v4l2-clk.h> #include <media/drv-intf/msp3400.h> #include <media/tuner.h> @@ -117,6 +116,11 @@ static struct em28xx_fmt format[] = { .depth = 16, .reg = EM28XX_OUTFMT_RGB_16_656, }, { + .name = "8 bpp Bayer RGRG..GBGB", + .fourcc = V4L2_PIX_FMT_SRGGB8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_RGRG, + }, { .name = "8 bpp Bayer BGBG..GRGR", .fourcc = V4L2_PIX_FMT_SBGGR8, .depth = 8, @@ -2140,11 +2144,6 @@ static int em28xx_v4l2_fini(struct em28xx *dev) v4l2_ctrl_handler_free(&v4l2->ctrl_handler); v4l2_device_unregister(&v4l2->v4l2_dev); - if (v4l2->clk) { - v4l2_clk_unregister_fixed(v4l2->clk); - v4l2->clk = NULL; - } - kref_put(&v4l2->ref, em28xx_free_v4l2); mutex_unlock(&dev->lock); @@ -2465,7 +2464,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) /* * Default format, used for tvp5150 or saa711x output formats */ - v4l2->vinmode = 0x10; + v4l2->vinmode = EM28XX_VINMODE_YUV422_CbYCrY; v4l2->vinctl = EM28XX_VINCTRL_INTERLACED | EM28XX_VINCTRL_CCIR656_ENABLE; diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h index e9f379959fa5..e8d97d5ec161 100644 --- a/drivers/media/usb/em28xx/em28xx.h +++ b/drivers/media/usb/em28xx/em28xx.h @@ -510,7 +510,6 @@ struct em28xx_v4l2 { struct v4l2_device v4l2_dev; struct v4l2_ctrl_handler ctrl_handler; - struct v4l2_clk *clk; struct video_device vdev; struct video_device vbi_dev; diff --git a/drivers/media/usb/go7007/go7007-v4l2.c b/drivers/media/usb/go7007/go7007-v4l2.c index 4eaba0c24629..ed5ec9773969 100644 --- a/drivers/media/usb/go7007/go7007-v4l2.c +++ b/drivers/media/usb/go7007/go7007-v4l2.c @@ -792,14 +792,13 @@ static int vidioc_subscribe_event(struct v4l2_fh *fh, { switch (sub->type) { - case V4L2_EVENT_CTRL: - return v4l2_ctrl_subscribe_event(fh, sub); case V4L2_EVENT_MOTION_DET: /* Allow for up to 30 events (1 second for NTSC) to be * stored. */ return v4l2_event_subscribe(fh, sub, 30, NULL); + default: + return v4l2_ctrl_subscribe_event(fh, sub); } - return -EINVAL; } diff --git a/drivers/media/usb/gspca/konica.c b/drivers/media/usb/gspca/konica.c index 71f273377f83..31b2117e8f1d 100644 --- a/drivers/media/usb/gspca/konica.c +++ b/drivers/media/usb/gspca/konica.c @@ -184,6 +184,9 @@ static int sd_start(struct gspca_dev *gspca_dev) return -EIO; } + if (alt->desc.bNumEndpoints < 2) + return -ENODEV; + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); n = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; diff --git a/drivers/media/usb/pulse8-cec/Kconfig b/drivers/media/usb/pulse8-cec/Kconfig index 6ffc407de62f..8937f3986a01 100644 --- a/drivers/media/usb/pulse8-cec/Kconfig +++ b/drivers/media/usb/pulse8-cec/Kconfig @@ -1,6 +1,6 @@ config USB_PULSE8_CEC tristate "Pulse Eight HDMI CEC" - depends on USB_ACM && MEDIA_CEC_SUPPORT + depends on USB_ACM && CEC_CORE select SERIO select SERIO_SERPORT ---help--- diff --git a/drivers/media/usb/pulse8-cec/pulse8-cec.c b/drivers/media/usb/pulse8-cec/pulse8-cec.c index 7c18daeb0ade..1dfc2de1fe77 100644 --- a/drivers/media/usb/pulse8-cec/pulse8-cec.c +++ b/drivers/media/usb/pulse8-cec/pulse8-cec.c @@ -461,7 +461,7 @@ static int pulse8_apply_persistent_config(struct pulse8 *pulse8, static int pulse8_cec_adap_enable(struct cec_adapter *adap, bool enable) { - struct pulse8 *pulse8 = adap->priv; + struct pulse8 *pulse8 = cec_get_drvdata(adap); u8 cmd[16]; int err; @@ -474,7 +474,7 @@ static int pulse8_cec_adap_enable(struct cec_adapter *adap, bool enable) static int pulse8_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr) { - struct pulse8 *pulse8 = adap->priv; + struct pulse8 *pulse8 = cec_get_drvdata(adap); u16 mask = 0; u16 pa = adap->phys_addr; u8 cmd[16]; @@ -594,7 +594,7 @@ unlock: static int pulse8_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg) { - struct pulse8 *pulse8 = adap->priv; + struct pulse8 *pulse8 = cec_get_drvdata(adap); u8 cmd[2]; unsigned int i; int err; diff --git a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c index 4af2fb5c85d5..8b643d511a0b 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c @@ -118,15 +118,10 @@ int pvr2_eeprom_analyze(struct pvr2_hdw *hdw) memset(&tvdata,0,sizeof(tvdata)); eeprom = pvr2_eeprom_fetch(hdw); - if (!eeprom) return -EINVAL; - - { - struct i2c_client fake_client; - /* Newer version expects a useless client interface */ - fake_client.addr = hdw->eeprom_addr; - fake_client.adapter = &hdw->i2c_adap; - tveeprom_hauppauge_analog(&fake_client,&tvdata,eeprom); - } + if (!eeprom) + return -EINVAL; + + tveeprom_hauppauge_analog(&tvdata, eeprom); trace_eeprom("eeprom assumed v4l tveeprom module"); trace_eeprom("eeprom direct call results:"); diff --git a/drivers/media/usb/rainshadow-cec/Kconfig b/drivers/media/usb/rainshadow-cec/Kconfig new file mode 100644 index 000000000000..3eb86607efb8 --- /dev/null +++ b/drivers/media/usb/rainshadow-cec/Kconfig @@ -0,0 +1,10 @@ +config USB_RAINSHADOW_CEC + tristate "RainShadow Tech HDMI CEC" + depends on USB_ACM && CEC_CORE + select SERIO + select SERIO_SERPORT + ---help--- + This is a cec driver for the RainShadow Tech HDMI CEC device. + + To compile this driver as a module, choose M here: the + module will be called rainshadow-cec. diff --git a/drivers/media/usb/rainshadow-cec/Makefile b/drivers/media/usb/rainshadow-cec/Makefile new file mode 100644 index 000000000000..a79fbc77e1f7 --- /dev/null +++ b/drivers/media/usb/rainshadow-cec/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec.o diff --git a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c new file mode 100644 index 000000000000..541ca543f71f --- /dev/null +++ b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c @@ -0,0 +1,388 @@ +/* + * RainShadow Tech HDMI CEC driver + * + * Copyright 2016 Hans Verkuil <hverkuil@xs4all.nl + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version of 2 of the License, or (at your + * option) any later version. See the file COPYING in the main directory of + * this archive for more details. + */ + +/* + * Notes: + * + * The higher level protocols are currently disabled. This can be added + * later, similar to how this is done for the Pulse Eight CEC driver. + * + * Documentation of the protocol is available here: + * + * http://rainshadowtech.com/doc/HDMICECtoUSBandRS232v2.0.pdf + */ + +#include <linux/completion.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/serio.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/time.h> +#include <linux/workqueue.h> + +#include <media/cec.h> + +MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>"); +MODULE_DESCRIPTION("RainShadow Tech HDMI CEC driver"); +MODULE_LICENSE("GPL"); + +#define DATA_SIZE 256 + +struct rain { + struct device *dev; + struct serio *serio; + struct cec_adapter *adap; + struct completion cmd_done; + struct work_struct work; + + /* Low-level ringbuffer, collecting incoming characters */ + char buf[DATA_SIZE]; + unsigned int buf_rd_idx; + unsigned int buf_wr_idx; + unsigned int buf_len; + spinlock_t buf_lock; + + /* command buffer */ + char cmd[DATA_SIZE]; + unsigned int cmd_idx; + bool cmd_started; + + /* reply to a command, only used to store the firmware version */ + char cmd_reply[DATA_SIZE]; + + struct mutex write_lock; +}; + +static void rain_process_msg(struct rain *rain) +{ + struct cec_msg msg = {}; + const char *cmd = rain->cmd + 3; + int stat = -1; + + for (; *cmd; cmd++) { + if (!isxdigit(*cmd)) + continue; + if (isxdigit(cmd[0]) && isxdigit(cmd[1])) { + if (msg.len == CEC_MAX_MSG_SIZE) + break; + if (hex2bin(msg.msg + msg.len, cmd, 1)) + continue; + msg.len++; + cmd++; + continue; + } + if (!cmd[1]) + stat = hex_to_bin(cmd[0]); + break; + } + + if (rain->cmd[0] == 'R') { + if (stat == 1 || stat == 2) + cec_received_msg(rain->adap, &msg); + return; + } + + switch (stat) { + case 1: + cec_transmit_done(rain->adap, CEC_TX_STATUS_OK, + 0, 0, 0, 0); + break; + case 2: + cec_transmit_done(rain->adap, CEC_TX_STATUS_NACK, + 0, 1, 0, 0); + break; + default: + cec_transmit_done(rain->adap, CEC_TX_STATUS_LOW_DRIVE, + 0, 0, 0, 1); + break; + } +} + +static void rain_irq_work_handler(struct work_struct *work) +{ + struct rain *rain = + container_of(work, struct rain, work); + + while (true) { + unsigned long flags; + bool exit_loop; + char data; + + spin_lock_irqsave(&rain->buf_lock, flags); + exit_loop = rain->buf_len == 0; + if (rain->buf_len) { + data = rain->buf[rain->buf_rd_idx]; + rain->buf_len--; + rain->buf_rd_idx = (rain->buf_rd_idx + 1) & 0xff; + } + spin_unlock_irqrestore(&rain->buf_lock, flags); + + if (exit_loop) + break; + + if (!rain->cmd_started && data != '?') + continue; + + switch (data) { + case '\r': + rain->cmd[rain->cmd_idx] = '\0'; + dev_dbg(rain->dev, "received: %s\n", rain->cmd); + if (!memcmp(rain->cmd, "REC", 3) || + !memcmp(rain->cmd, "STA", 3)) { + rain_process_msg(rain); + } else { + strcpy(rain->cmd_reply, rain->cmd); + complete(&rain->cmd_done); + } + rain->cmd_idx = 0; + rain->cmd_started = false; + break; + + case '\n': + rain->cmd_idx = 0; + rain->cmd_started = false; + break; + + case '?': + rain->cmd_idx = 0; + rain->cmd_started = true; + break; + + default: + if (rain->cmd_idx >= DATA_SIZE - 1) { + dev_dbg(rain->dev, + "throwing away %d bytes of garbage\n", rain->cmd_idx); + rain->cmd_idx = 0; + } + rain->cmd[rain->cmd_idx++] = data; + break; + } + } +} + +static irqreturn_t rain_interrupt(struct serio *serio, unsigned char data, + unsigned int flags) +{ + struct rain *rain = serio_get_drvdata(serio); + + if (rain->buf_len == DATA_SIZE) { + dev_warn_once(rain->dev, "buffer overflow\n"); + return IRQ_HANDLED; + } + spin_lock(&rain->buf_lock); + rain->buf_len++; + rain->buf[rain->buf_wr_idx] = data; + rain->buf_wr_idx = (rain->buf_wr_idx + 1) & 0xff; + spin_unlock(&rain->buf_lock); + schedule_work(&rain->work); + return IRQ_HANDLED; +} + +static void rain_disconnect(struct serio *serio) +{ + struct rain *rain = serio_get_drvdata(serio); + + cancel_work_sync(&rain->work); + cec_unregister_adapter(rain->adap); + dev_info(&serio->dev, "disconnected\n"); + serio_close(serio); + serio_set_drvdata(serio, NULL); + kfree(rain); +} + +static int rain_send(struct rain *rain, const char *command) +{ + int err = serio_write(rain->serio, '!'); + + dev_dbg(rain->dev, "send: %s\n", command); + while (!err && *command) + err = serio_write(rain->serio, *command++); + if (!err) + err = serio_write(rain->serio, '~'); + + return err; +} + +static int rain_send_and_wait(struct rain *rain, + const char *cmd, const char *reply) +{ + int err; + + init_completion(&rain->cmd_done); + + mutex_lock(&rain->write_lock); + err = rain_send(rain, cmd); + if (err) + goto err; + + if (!wait_for_completion_timeout(&rain->cmd_done, HZ)) { + err = -ETIMEDOUT; + goto err; + } + if (reply && strncmp(rain->cmd_reply, reply, strlen(reply))) { + dev_dbg(rain->dev, + "transmit of '%s': received '%s' instead of '%s'\n", + cmd, rain->cmd_reply, reply); + err = -EIO; + } +err: + mutex_unlock(&rain->write_lock); + return err; +} + +static int rain_setup(struct rain *rain, struct serio *serio, + struct cec_log_addrs *log_addrs, u16 *pa) +{ + int err; + + err = rain_send_and_wait(rain, "R", "REV"); + if (err) + return err; + dev_info(rain->dev, "Firmware version %s\n", rain->cmd_reply + 4); + + err = rain_send_and_wait(rain, "Q 1", "QTY"); + if (err) + return err; + err = rain_send_and_wait(rain, "c0000", "CFG"); + if (err) + return err; + return rain_send_and_wait(rain, "A F 0000", "ADR"); +} + +static int rain_cec_adap_enable(struct cec_adapter *adap, bool enable) +{ + return 0; +} + +static int rain_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr) +{ + struct rain *rain = cec_get_drvdata(adap); + u8 cmd[16]; + + if (log_addr == CEC_LOG_ADDR_INVALID) + log_addr = CEC_LOG_ADDR_UNREGISTERED; + snprintf(cmd, sizeof(cmd), "A %x", log_addr); + return rain_send_and_wait(rain, cmd, "ADR"); +} + +static int rain_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, + u32 signal_free_time, struct cec_msg *msg) +{ + struct rain *rain = cec_get_drvdata(adap); + char cmd[2 * CEC_MAX_MSG_SIZE + 16]; + unsigned int i; + int err; + + if (msg->len == 1) { + snprintf(cmd, sizeof(cmd), "x%x", cec_msg_destination(msg)); + } else { + char hex[3]; + + snprintf(cmd, sizeof(cmd), "x%x %02x ", + cec_msg_destination(msg), msg->msg[1]); + for (i = 2; i < msg->len; i++) { + snprintf(hex, sizeof(hex), "%02x", msg->msg[i]); + strncat(cmd, hex, sizeof(cmd)); + } + } + mutex_lock(&rain->write_lock); + err = rain_send(rain, cmd); + mutex_unlock(&rain->write_lock); + return err; +} + +static const struct cec_adap_ops rain_cec_adap_ops = { + .adap_enable = rain_cec_adap_enable, + .adap_log_addr = rain_cec_adap_log_addr, + .adap_transmit = rain_cec_adap_transmit, +}; + +static int rain_connect(struct serio *serio, struct serio_driver *drv) +{ + u32 caps = CEC_CAP_TRANSMIT | CEC_CAP_LOG_ADDRS | CEC_CAP_PHYS_ADDR | + CEC_CAP_PASSTHROUGH | CEC_CAP_RC | CEC_CAP_MONITOR_ALL; + struct rain *rain; + int err = -ENOMEM; + struct cec_log_addrs log_addrs = {}; + u16 pa = CEC_PHYS_ADDR_INVALID; + + rain = kzalloc(sizeof(*rain), GFP_KERNEL); + + if (!rain) + return -ENOMEM; + + rain->serio = serio; + rain->adap = cec_allocate_adapter(&rain_cec_adap_ops, rain, + "HDMI CEC", caps, 1); + err = PTR_ERR_OR_ZERO(rain->adap); + if (err < 0) + goto free_device; + + rain->dev = &serio->dev; + serio_set_drvdata(serio, rain); + INIT_WORK(&rain->work, rain_irq_work_handler); + mutex_init(&rain->write_lock); + + err = serio_open(serio, drv); + if (err) + goto delete_adap; + + err = rain_setup(rain, serio, &log_addrs, &pa); + if (err) + goto close_serio; + + err = cec_register_adapter(rain->adap, &serio->dev); + if (err < 0) + goto close_serio; + + rain->dev = &rain->adap->devnode.dev; + return 0; + +close_serio: + serio_close(serio); +delete_adap: + cec_delete_adapter(rain->adap); + serio_set_drvdata(serio, NULL); +free_device: + kfree(rain); + return err; +} + +static struct serio_device_id rain_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_RAINSHADOW_CEC, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, rain_serio_ids); + +static struct serio_driver rain_drv = { + .driver = { + .name = "rainshadow-cec", + }, + .description = "RainShadow Tech HDMI CEC driver", + .id_table = rain_serio_ids, + .interrupt = rain_interrupt, + .connect = rain_connect, + .disconnect = rain_disconnect, +}; + +module_serio_driver(rain_drv); diff --git a/drivers/media/usb/stk1160/Kconfig b/drivers/media/usb/stk1160/Kconfig index 22dff4f3b921..425ed00e2599 100644 --- a/drivers/media/usb/stk1160/Kconfig +++ b/drivers/media/usb/stk1160/Kconfig @@ -6,7 +6,11 @@ config VIDEO_STK1160_COMMON This is a video4linux driver for STK1160 based video capture devices. To compile this driver as a module, choose M here: the - module will be called stk1160 + module will be called stk1160. + + This driver only provides support for video capture. For audio + capture, you need to select the snd-usb-audio driver (i.e. + CONFIG_SND_USB_AUDIO). config VIDEO_STK1160 tristate diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c index c4fdc1fa32ef..7e960d0a5b92 100644 --- a/drivers/media/usb/tm6000/tm6000-video.c +++ b/drivers/media/usb/tm6000/tm6000-video.c @@ -631,7 +631,7 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev) urb = usb_alloc_urb(max_packets, GFP_KERNEL); if (!urb) { tm6000_uninit_isoc(dev); - usb_free_urb(urb); + tm6000_free_urb_buffers(dev); return -ENOMEM; } dev->isoc_ctl.urb[i] = urb; diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c index f5c635a67d74..f9c3325aa4d4 100644 --- a/drivers/media/usb/usbvision/usbvision-video.c +++ b/drivers/media/usb/usbvision/usbvision-video.c @@ -1501,7 +1501,14 @@ static int usbvision_probe(struct usb_interface *intf, } for (i = 0; i < usbvision->num_alt; i++) { - u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < 2) { + ret = -ENODEV; + goto err_pkt; + } + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc. wMaxPacketSize); usbvision->alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 04bf35063c4c..46d6be0bb316 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -188,6 +188,21 @@ static struct uvc_format_desc uvc_fmts[] = { .guid = UVC_GUID_FORMAT_GR16, .fcc = V4L2_PIX_FMT_SGRBG16, }, + { + .name = "Depth data 16-bit (Z16)", + .guid = UVC_GUID_FORMAT_INVZ, + .fcc = V4L2_PIX_FMT_Z16, + }, + { + .name = "Greyscale 10-bit (Y10 )", + .guid = UVC_GUID_FORMAT_INVI, + .fcc = V4L2_PIX_FMT_Y10, + }, + { + .name = "IR:Depth 26-bit (INZI)", + .guid = UVC_GUID_FORMAT_INZI, + .fcc = V4L2_PIX_FMT_INZI, + }, }; /* ------------------------------------------------------------------------ diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 07a6c833ef7b..47d93a938dde 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -818,7 +818,7 @@ static void uvc_video_stats_decode(struct uvc_streaming *stream, /* Update the packets counters. */ stream->stats.frame.nb_packets++; - if (len > header_size) + if (len <= header_size) stream->stats.frame.nb_empty++; if (data[1] & UVC_STREAM_ERR) @@ -868,14 +868,8 @@ size_t uvc_video_stats_dump(struct uvc_streaming *stream, char *buf, struct timespec ts; size_t count = 0; - ts.tv_sec = stream->stats.stream.stop_ts.tv_sec - - stream->stats.stream.start_ts.tv_sec; - ts.tv_nsec = stream->stats.stream.stop_ts.tv_nsec - - stream->stats.stream.start_ts.tv_nsec; - if (ts.tv_nsec < 0) { - ts.tv_sec--; - ts.tv_nsec += 1000000000; - } + ts = timespec_sub(stream->stats.stream.stop_ts, + stream->stats.stream.start_ts); /* Compute the SCR.SOF frequency estimate. At the nominal 1kHz SOF * frequency this will not overflow before more than 1h. diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index 4205e7a423f0..15e415e32c7f 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -143,6 +143,15 @@ #define UVC_GUID_FORMAT_RW10 \ { 'R', 'W', '1', '0', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_INVZ \ + { 'I', 'N', 'V', 'Z', 0x90, 0x2d, 0x58, 0x4a, \ + 0x92, 0x0b, 0x77, 0x3f, 0x1f, 0x2c, 0x55, 0x6b} +#define UVC_GUID_FORMAT_INZI \ + { 'I', 'N', 'Z', 'I', 0x66, 0x1a, 0x42, 0xa2, \ + 0x90, 0x65, 0xd0, 0x18, 0x14, 0xa8, 0xef, 0x8a} +#define UVC_GUID_FORMAT_INVI \ + { 'I', 'N', 'V', 'I', 0xdb, 0x57, 0x49, 0x5e, \ + 0x8e, 0x3f, 0xf4, 0x79, 0x53, 0x2b, 0x94, 0x6f} /* ------------------------------------------------------------------------ * Driver specific constants. diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c index f2d6fc03dda0..efdcd5bd6a4c 100644 --- a/drivers/media/usb/zr364xx/zr364xx.c +++ b/drivers/media/usb/zr364xx/zr364xx.c @@ -600,6 +600,14 @@ static int zr364xx_read_video_callback(struct zr364xx_camera *cam, ptr = pdest = frm->lpvbits; if (frm->ulState == ZR364XX_READ_IDLE) { + if (purb->actual_length < 128) { + /* header incomplete */ + dev_info(&cam->udev->dev, + "%s: buffer (%d bytes) too small to hold jpeg header. Discarding.\n", + __func__, purb->actual_length); + return -EINVAL; + } + frm->ulState = ZR364XX_READ_FRAME; frm->cur_size = 0; diff --git a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c index eac9565dc3d8..6f52970f8b54 100644 --- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -161,6 +161,20 @@ static inline int put_v4l2_sdr_format(struct v4l2_sdr_format *kp, struct v4l2_sd return 0; } +static inline int get_v4l2_meta_format(struct v4l2_meta_format *kp, struct v4l2_meta_format __user *up) +{ + if (copy_from_user(kp, up, sizeof(struct v4l2_meta_format))) + return -EFAULT; + return 0; +} + +static inline int put_v4l2_meta_format(struct v4l2_meta_format *kp, struct v4l2_meta_format __user *up) +{ + if (copy_to_user(up, kp, sizeof(struct v4l2_meta_format))) + return -EFAULT; + return 0; +} + struct v4l2_format32 { __u32 type; /* enum v4l2_buf_type */ union { @@ -170,6 +184,7 @@ struct v4l2_format32 { struct v4l2_vbi_format vbi; struct v4l2_sliced_vbi_format sliced; struct v4l2_sdr_format sdr; + struct v4l2_meta_format meta; __u8 raw_data[200]; /* user-defined */ } fmt; }; @@ -216,6 +231,8 @@ static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __us case V4L2_BUF_TYPE_SDR_CAPTURE: case V4L2_BUF_TYPE_SDR_OUTPUT: return get_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr); + case V4L2_BUF_TYPE_META_CAPTURE: + return get_v4l2_meta_format(&kp->fmt.meta, &up->fmt.meta); default: pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n", kp->type); @@ -263,6 +280,8 @@ static int __put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __us case V4L2_BUF_TYPE_SDR_CAPTURE: case V4L2_BUF_TYPE_SDR_OUTPUT: return put_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr); + case V4L2_BUF_TYPE_META_CAPTURE: + return put_v4l2_meta_format(&kp->fmt.meta, &up->fmt.meta); default: pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n", kp->type); @@ -990,6 +1009,10 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar if (put_v4l2_ext_controls32(&karg.v2ecs, up)) err = -EFAULT; break; + case VIDIOC_S_EDID: + if (put_v4l2_edid32(&karg.v2edid, up)) + err = -EFAULT; + break; } if (err) return err; @@ -1011,7 +1034,6 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar break; case VIDIOC_G_EDID: - case VIDIOC_S_EDID: err = put_v4l2_edid32(&karg.v2edid, up); break; diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index b9e08e3d6e0e..ec42872d11cf 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -459,8 +459,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) }; static const char * const dv_rgb_range[] = { "Automatic", - "RGB limited range (16-235)", - "RGB full range (0-255)", + "RGB Limited Range (16-235)", + "RGB Full Range (0-255)", NULL, }; static const char * const dv_it_content_type[] = { @@ -997,6 +997,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, *min = 0; *max = *step = 1; break; + case V4L2_CID_ROTATE: + *type = V4L2_CTRL_TYPE_INTEGER; + *flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT; + break; case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE: case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE: *type = V4L2_CTRL_TYPE_INTEGER; diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c index fa2124cb31bd..c647ba648805 100644 --- a/drivers/media/v4l2-core/v4l2-dev.c +++ b/drivers/media/v4l2-core/v4l2-dev.c @@ -575,30 +575,34 @@ static void determine_valid_ioctls(struct video_device *vdev) set_bit(_IOC_NR(VIDIOC_ENUM_FREQ_BANDS), valid_ioctls); if (is_vid || is_tch) { - /* video specific ioctls */ + /* video and metadata specific ioctls */ if ((is_rx && (ops->vidioc_enum_fmt_vid_cap || ops->vidioc_enum_fmt_vid_cap_mplane || - ops->vidioc_enum_fmt_vid_overlay)) || + ops->vidioc_enum_fmt_vid_overlay || + ops->vidioc_enum_fmt_meta_cap)) || (is_tx && (ops->vidioc_enum_fmt_vid_out || ops->vidioc_enum_fmt_vid_out_mplane))) set_bit(_IOC_NR(VIDIOC_ENUM_FMT), valid_ioctls); if ((is_rx && (ops->vidioc_g_fmt_vid_cap || ops->vidioc_g_fmt_vid_cap_mplane || - ops->vidioc_g_fmt_vid_overlay)) || + ops->vidioc_g_fmt_vid_overlay || + ops->vidioc_g_fmt_meta_cap)) || (is_tx && (ops->vidioc_g_fmt_vid_out || ops->vidioc_g_fmt_vid_out_mplane || ops->vidioc_g_fmt_vid_out_overlay))) set_bit(_IOC_NR(VIDIOC_G_FMT), valid_ioctls); if ((is_rx && (ops->vidioc_s_fmt_vid_cap || ops->vidioc_s_fmt_vid_cap_mplane || - ops->vidioc_s_fmt_vid_overlay)) || + ops->vidioc_s_fmt_vid_overlay || + ops->vidioc_s_fmt_meta_cap)) || (is_tx && (ops->vidioc_s_fmt_vid_out || ops->vidioc_s_fmt_vid_out_mplane || ops->vidioc_s_fmt_vid_out_overlay))) set_bit(_IOC_NR(VIDIOC_S_FMT), valid_ioctls); if ((is_rx && (ops->vidioc_try_fmt_vid_cap || ops->vidioc_try_fmt_vid_cap_mplane || - ops->vidioc_try_fmt_vid_overlay)) || + ops->vidioc_try_fmt_vid_overlay || + ops->vidioc_try_fmt_meta_cap)) || (is_tx && (ops->vidioc_try_fmt_vid_out || ops->vidioc_try_fmt_vid_out_mplane || ops->vidioc_try_fmt_vid_out_overlay))) @@ -664,7 +668,7 @@ static void determine_valid_ioctls(struct video_device *vdev) } if (is_vid || is_vbi || is_sdr || is_tch) { - /* ioctls valid for video, vbi or sdr */ + /* ioctls valid for video, metadata, vbi or sdr */ SET_VALID_IOCTL(ops, VIDIOC_REQBUFS, vidioc_reqbufs); SET_VALID_IOCTL(ops, VIDIOC_QUERYBUF, vidioc_querybuf); SET_VALID_IOCTL(ops, VIDIOC_QBUF, vidioc_qbuf); diff --git a/drivers/media/v4l2-core/v4l2-device.c b/drivers/media/v4l2-core/v4l2-device.c index f364cc1b521d..937c6de85606 100644 --- a/drivers/media/v4l2-core/v4l2-device.c +++ b/drivers/media/v4l2-core/v4l2-device.c @@ -235,6 +235,9 @@ int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) if (!(sd->flags & V4L2_SUBDEV_FL_HAS_DEVNODE)) continue; + if (sd->devnode) + continue; + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); if (!vdev) { err = -ENOMEM; diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c index 0c3f238a2e76..e5a2187381db 100644 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -155,6 +155,7 @@ const char *v4l2_type_names[] = { [V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE] = "vid-out-mplane", [V4L2_BUF_TYPE_SDR_CAPTURE] = "sdr-cap", [V4L2_BUF_TYPE_SDR_OUTPUT] = "sdr-out", + [V4L2_BUF_TYPE_META_CAPTURE] = "meta-cap", }; EXPORT_SYMBOL(v4l2_type_names); @@ -246,6 +247,7 @@ static void v4l_print_format(const void *arg, bool write_only) const struct v4l2_sliced_vbi_format *sliced; const struct v4l2_window *win; const struct v4l2_sdr_format *sdr; + const struct v4l2_meta_format *meta; unsigned i; pr_cont("type=%s", prt_names(p->type, v4l2_type_names)); @@ -325,6 +327,15 @@ static void v4l_print_format(const void *arg, bool write_only) (sdr->pixelformat >> 16) & 0xff, (sdr->pixelformat >> 24) & 0xff); break; + case V4L2_BUF_TYPE_META_CAPTURE: + meta = &p->fmt.meta; + pr_cont(", dataformat=%c%c%c%c, buffersize=%u\n", + (meta->dataformat >> 0) & 0xff, + (meta->dataformat >> 8) & 0xff, + (meta->dataformat >> 16) & 0xff, + (meta->dataformat >> 24) & 0xff, + meta->buffersize); + break; } } @@ -943,6 +954,10 @@ static int check_fmt(struct file *file, enum v4l2_buf_type type) if (is_sdr && is_tx && ops->vidioc_g_fmt_sdr_out) return 0; break; + case V4L2_BUF_TYPE_META_CAPTURE: + if (is_vid && is_rx && ops->vidioc_g_fmt_meta_cap) + return 0; + break; default: break; } @@ -1131,6 +1146,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) case V4L2_PIX_FMT_Y8I: descr = "Interleaved 8-bit Greyscale"; break; case V4L2_PIX_FMT_Y12I: descr = "Interleaved 12-bit Greyscale"; break; case V4L2_PIX_FMT_Z16: descr = "16-bit Depth"; break; + case V4L2_PIX_FMT_INZI: descr = "Planar 10:16 Greyscale Depth"; break; case V4L2_PIX_FMT_PAL8: descr = "8-bit Palette"; break; case V4L2_PIX_FMT_UV8: descr = "8-bit Chrominance UV 4-4"; break; case V4L2_PIX_FMT_YVU410: descr = "Planar YVU 4:1:0"; break; @@ -1217,6 +1233,8 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) case V4L2_TCH_FMT_DELTA_TD08: descr = "8-bit signed deltas"; break; case V4L2_TCH_FMT_TU16: descr = "16-bit unsigned touch data"; break; case V4L2_TCH_FMT_TU08: descr = "8-bit unsigned touch data"; break; + case V4L2_META_FMT_VSP1_HGO: descr = "R-Car VSP1 1-D Histogram"; break; + case V4L2_META_FMT_VSP1_HGT: descr = "R-Car VSP1 2-D Histogram"; break; default: /* Compressed formats */ @@ -1326,6 +1344,11 @@ static int v4l_enum_fmt(const struct v4l2_ioctl_ops *ops, break; ret = ops->vidioc_enum_fmt_sdr_out(file, fh, arg); break; + case V4L2_BUF_TYPE_META_CAPTURE: + if (unlikely(!is_rx || !is_vid || !ops->vidioc_enum_fmt_meta_cap)) + break; + ret = ops->vidioc_enum_fmt_meta_cap(file, fh, arg); + break; } if (ret == 0) v4l_fill_fmtdesc(p); @@ -1425,6 +1448,10 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops, if (unlikely(!is_tx || !is_sdr || !ops->vidioc_g_fmt_sdr_out)) break; return ops->vidioc_g_fmt_sdr_out(file, fh, arg); + case V4L2_BUF_TYPE_META_CAPTURE: + if (unlikely(!is_rx || !is_vid || !ops->vidioc_g_fmt_meta_cap)) + break; + return ops->vidioc_g_fmt_meta_cap(file, fh, arg); } return -EINVAL; } @@ -1530,6 +1557,11 @@ static int v4l_s_fmt(const struct v4l2_ioctl_ops *ops, break; CLEAR_AFTER_FIELD(p, fmt.sdr); return ops->vidioc_s_fmt_sdr_out(file, fh, arg); + case V4L2_BUF_TYPE_META_CAPTURE: + if (unlikely(!is_rx || !is_vid || !ops->vidioc_s_fmt_meta_cap)) + break; + CLEAR_AFTER_FIELD(p, fmt.meta); + return ops->vidioc_s_fmt_meta_cap(file, fh, arg); } return -EINVAL; } @@ -1615,6 +1647,11 @@ static int v4l_try_fmt(const struct v4l2_ioctl_ops *ops, break; CLEAR_AFTER_FIELD(p, fmt.sdr); return ops->vidioc_try_fmt_sdr_out(file, fh, arg); + case V4L2_BUF_TYPE_META_CAPTURE: + if (unlikely(!is_rx || !is_vid || !ops->vidioc_try_fmt_meta_cap)) + break; + CLEAR_AFTER_FIELD(p, fmt.meta); + return ops->vidioc_try_fmt_meta_cap(file, fh, arg); } return -EINVAL; } diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 7c1d390ea438..94afbbf92807 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -984,11 +984,12 @@ static int __qbuf_userptr(struct vb2_buffer *vb, const void *pb) memset(planes, 0, sizeof(planes[0]) * vb->num_planes); /* Copy relevant information provided by the userspace */ - if (pb) + if (pb) { ret = call_bufop(vb->vb2_queue, fill_vb2_buffer, vb, pb, planes); - if (ret) - return ret; + if (ret) + return ret; + } for (plane = 0; plane < vb->num_planes; ++plane) { /* Skip the plane if already verified */ @@ -1101,11 +1102,12 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb, const void *pb) memset(planes, 0, sizeof(planes[0]) * vb->num_planes); /* Copy relevant information provided by the userspace */ - if (pb) + if (pb) { ret = call_bufop(vb->vb2_queue, fill_vb2_buffer, vb, pb, planes); - if (ret) - return ret; + if (ret) + return ret; + } for (plane = 0; plane < vb->num_planes; ++plane) { struct dma_buf *dbuf = dma_buf_get(planes[plane].m.fd); diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c index 2db0413f5d57..4f246d166111 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c @@ -12,6 +12,7 @@ #include <linux/dma-buf.h> #include <linux/module.h> +#include <linux/refcount.h> #include <linux/scatterlist.h> #include <linux/sched.h> #include <linux/slab.h> @@ -34,7 +35,7 @@ struct vb2_dc_buf { /* MMAP related */ struct vb2_vmarea_handler handler; - atomic_t refcount; + refcount_t refcount; struct sg_table *sgt_base; /* DMABUF related */ @@ -86,7 +87,7 @@ static unsigned int vb2_dc_num_users(void *buf_priv) { struct vb2_dc_buf *buf = buf_priv; - return atomic_read(&buf->refcount); + return refcount_read(&buf->refcount); } static void vb2_dc_prepare(void *buf_priv) @@ -122,7 +123,7 @@ static void vb2_dc_put(void *buf_priv) { struct vb2_dc_buf *buf = buf_priv; - if (!atomic_dec_and_test(&buf->refcount)) + if (!refcount_dec_and_test(&buf->refcount)) return; if (buf->sgt_base) { @@ -170,7 +171,7 @@ static void *vb2_dc_alloc(struct device *dev, unsigned long attrs, buf->handler.put = vb2_dc_put; buf->handler.arg = buf; - atomic_inc(&buf->refcount); + refcount_set(&buf->refcount, 1); return buf; } @@ -407,7 +408,7 @@ static struct dma_buf *vb2_dc_get_dmabuf(void *buf_priv, unsigned long flags) return NULL; /* dmabuf keeps reference to vb2 buffer */ - atomic_inc(&buf->refcount); + refcount_inc(&buf->refcount); return dbuf; } diff --git a/drivers/media/v4l2-core/videobuf2-dma-sg.c b/drivers/media/v4l2-core/videobuf2-dma-sg.c index 6fd1343b7c13..8e8798a74760 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-sg.c +++ b/drivers/media/v4l2-core/videobuf2-dma-sg.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/mm.h> +#include <linux/refcount.h> #include <linux/scatterlist.h> #include <linux/sched.h> #include <linux/slab.h> @@ -46,7 +47,7 @@ struct vb2_dma_sg_buf { struct sg_table *dma_sgt; size_t size; unsigned int num_pages; - atomic_t refcount; + refcount_t refcount; struct vb2_vmarea_handler handler; struct dma_buf_attachment *db_attach; @@ -150,7 +151,7 @@ static void *vb2_dma_sg_alloc(struct device *dev, unsigned long dma_attrs, buf->handler.put = vb2_dma_sg_put; buf->handler.arg = buf; - atomic_inc(&buf->refcount); + refcount_set(&buf->refcount, 1); dprintk(1, "%s: Allocated buffer of %d pages\n", __func__, buf->num_pages); @@ -176,7 +177,7 @@ static void vb2_dma_sg_put(void *buf_priv) struct sg_table *sgt = &buf->sg_table; int i = buf->num_pages; - if (atomic_dec_and_test(&buf->refcount)) { + if (refcount_dec_and_test(&buf->refcount)) { dprintk(1, "%s: Freeing buffer of %d pages\n", __func__, buf->num_pages); dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, @@ -320,7 +321,7 @@ static unsigned int vb2_dma_sg_num_users(void *buf_priv) { struct vb2_dma_sg_buf *buf = buf_priv; - return atomic_read(&buf->refcount); + return refcount_read(&buf->refcount); } static int vb2_dma_sg_mmap(void *buf_priv, struct vm_area_struct *vma) @@ -530,7 +531,7 @@ static struct dma_buf *vb2_dma_sg_get_dmabuf(void *buf_priv, unsigned long flags return NULL; /* dmabuf keeps reference to vb2 buffer */ - atomic_inc(&buf->refcount); + refcount_inc(&buf->refcount); return dbuf; } diff --git a/drivers/media/v4l2-core/videobuf2-memops.c b/drivers/media/v4l2-core/videobuf2-memops.c index 1cd322e939c7..4bb8424114ce 100644 --- a/drivers/media/v4l2-core/videobuf2-memops.c +++ b/drivers/media/v4l2-core/videobuf2-memops.c @@ -96,10 +96,10 @@ static void vb2_common_vm_open(struct vm_area_struct *vma) struct vb2_vmarea_handler *h = vma->vm_private_data; pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n", - __func__, h, atomic_read(h->refcount), vma->vm_start, + __func__, h, refcount_read(h->refcount), vma->vm_start, vma->vm_end); - atomic_inc(h->refcount); + refcount_inc(h->refcount); } /** @@ -114,7 +114,7 @@ static void vb2_common_vm_close(struct vm_area_struct *vma) struct vb2_vmarea_handler *h = vma->vm_private_data; pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n", - __func__, h, atomic_read(h->refcount), vma->vm_start, + __func__, h, refcount_read(h->refcount), vma->vm_start, vma->vm_end); h->put(h->arg); diff --git a/drivers/media/v4l2-core/videobuf2-v4l2.c b/drivers/media/v4l2-core/videobuf2-v4l2.c index 3529849d2218..0c0669976bdc 100644 --- a/drivers/media/v4l2-core/videobuf2-v4l2.c +++ b/drivers/media/v4l2-core/videobuf2-v4l2.c @@ -544,6 +544,9 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create) case V4L2_BUF_TYPE_SDR_OUTPUT: requested_sizes[0] = f->fmt.sdr.buffersize; break; + case V4L2_BUF_TYPE_META_CAPTURE: + requested_sizes[0] = f->fmt.meta.buffersize; + break; default: return -EINVAL; } diff --git a/drivers/media/v4l2-core/videobuf2-vmalloc.c b/drivers/media/v4l2-core/videobuf2-vmalloc.c index 27d1db3bb8cf..b337d780844c 100644 --- a/drivers/media/v4l2-core/videobuf2-vmalloc.c +++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c @@ -13,6 +13,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/mm.h> +#include <linux/refcount.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/vmalloc.h> @@ -26,7 +27,7 @@ struct vb2_vmalloc_buf { struct frame_vector *vec; enum dma_data_direction dma_dir; unsigned long size; - atomic_t refcount; + refcount_t refcount; struct vb2_vmarea_handler handler; struct dma_buf *dbuf; }; @@ -56,7 +57,7 @@ static void *vb2_vmalloc_alloc(struct device *dev, unsigned long attrs, return ERR_PTR(-ENOMEM); } - atomic_inc(&buf->refcount); + refcount_set(&buf->refcount, 1); return buf; } @@ -64,7 +65,7 @@ static void vb2_vmalloc_put(void *buf_priv) { struct vb2_vmalloc_buf *buf = buf_priv; - if (atomic_dec_and_test(&buf->refcount)) { + if (refcount_dec_and_test(&buf->refcount)) { vfree(buf->vaddr); kfree(buf); } @@ -161,7 +162,7 @@ static void *vb2_vmalloc_vaddr(void *buf_priv) static unsigned int vb2_vmalloc_num_users(void *buf_priv) { struct vb2_vmalloc_buf *buf = buf_priv; - return atomic_read(&buf->refcount); + return refcount_read(&buf->refcount); } static int vb2_vmalloc_mmap(void *buf_priv, struct vm_area_struct *vma) @@ -368,7 +369,7 @@ static struct dma_buf *vb2_vmalloc_get_dmabuf(void *buf_priv, unsigned long flag return NULL; /* dmabuf keeps reference to vb2 buffer */ - atomic_inc(&buf->refcount); + refcount_inc(&buf->refcount); return dbuf; } diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index abd0e2d57c20..8ed8202da57a 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -29,11 +29,7 @@ source "drivers/staging/media/omap4iss/Kconfig" source "drivers/staging/media/platform/bcm2835/Kconfig" -source "drivers/staging/media/s5p-cec/Kconfig" - # Keep LIRC at the end, as it has sub-menus source "drivers/staging/media/lirc/Kconfig" -source "drivers/staging/media/st-cec/Kconfig" - endif diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index dc89325c463d..3a6adeabede1 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -1,8 +1,6 @@ obj-$(CONFIG_I2C_BCM2048) += bcm2048/ -obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC) += s5p-cec/ obj-$(CONFIG_DVB_CXD2099) += cxd2099/ obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_VIDEO_BCM2835) += platform/bcm2835/ obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ -obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += st-cec/ diff --git a/drivers/staging/media/bcm2048/radio-bcm2048.c b/drivers/staging/media/bcm2048/radio-bcm2048.c index d605c41d0424..38f72d069e27 100644 --- a/drivers/staging/media/bcm2048/radio-bcm2048.c +++ b/drivers/staging/media/bcm2048/radio-bcm2048.c @@ -177,12 +177,12 @@ #define BCM2048_FREQDEV_UNIT 10000 #define BCM2048_FREQV4L2_MULTI 625 -#define dev_to_v4l2(f) ((f * BCM2048_FREQDEV_UNIT) / BCM2048_FREQV4L2_MULTI) -#define v4l2_to_dev(f) ((f * BCM2048_FREQV4L2_MULTI) / BCM2048_FREQDEV_UNIT) +#define dev_to_v4l2(f) (((f) * BCM2048_FREQDEV_UNIT) / BCM2048_FREQV4L2_MULTI) +#define v4l2_to_dev(f) (((f) * BCM2048_FREQV4L2_MULTI) / BCM2048_FREQDEV_UNIT) -#define msb(x) ((u8)((u16)x >> 8)) -#define lsb(x) ((u8)((u16)x & 0x00FF)) -#define compose_u16(msb, lsb) (((u16)msb << 8) | lsb) +#define msb(x) ((u8)((u16)(x) >> 8)) +#define lsb(x) ((u8)((u16)(x) & 0x00FF)) +#define compose_u16(msb, lsb) (((u16)(msb) << 8) | (lsb)) #define BCM2048_DEFAULT_POWERING_DELAY 20 #define BCM2048_DEFAULT_REGION 0x02 @@ -1534,7 +1534,11 @@ static int bcm2048_parse_rt_match_c(struct bcm2048_device *bdev, int i, if (crc == BCM2048_RDS_CRC_UNRECOVARABLE) return 0; - BUG_ON((index+2) >= BCM2048_MAX_RDS_RT); + if ((index + 2) >= BCM2048_MAX_RDS_RT) { + dev_err(&bdev->client->dev, + "Incorrect index = %d\n", index); + return 0; + } if ((bdev->rds_info.radio_text[i] & BCM2048_RDS_BLOCK_MASK) == BCM2048_RDS_BLOCK_C) { @@ -1557,7 +1561,11 @@ static void bcm2048_parse_rt_match_d(struct bcm2048_device *bdev, int i, if (crc == BCM2048_RDS_CRC_UNRECOVARABLE) return; - BUG_ON((index+4) >= BCM2048_MAX_RDS_RT); + if ((index + 4) >= BCM2048_MAX_RDS_RT) { + dev_err(&bdev->client->dev, + "Incorrect index = %d\n", index); + return; + } if ((bdev->rds_info.radio_text[i] & BCM2048_RDS_BLOCK_MASK) == BCM2048_RDS_BLOCK_D) @@ -2008,7 +2016,7 @@ static ssize_t bcm2048_##prop##_read(struct device *dev, \ if (!bdev) \ return -ENODEV; \ \ - out = kzalloc(size + 1, GFP_KERNEL); \ + out = kzalloc((size) + 1, GFP_KERNEL); \ if (!out) \ return -ENOMEM; \ \ @@ -2634,7 +2642,7 @@ exit: return err; } -static int __exit bcm2048_i2c_driver_remove(struct i2c_client *client) +static int bcm2048_i2c_driver_remove(struct i2c_client *client) { struct bcm2048_device *bdev = i2c_get_clientdata(client); @@ -2673,7 +2681,7 @@ static struct i2c_driver bcm2048_i2c_driver = { .name = BCM2048_DRIVER_NAME, }, .probe = bcm2048_i2c_driver_probe, - .remove = __exit_p(bcm2048_i2c_driver_remove), + .remove = bcm2048_i2c_driver_remove, .id_table = bcm2048_id, }; diff --git a/drivers/staging/media/lirc/Kconfig b/drivers/staging/media/lirc/Kconfig index bc67da254262..3e350a9922de 100644 --- a/drivers/staging/media/lirc/Kconfig +++ b/drivers/staging/media/lirc/Kconfig @@ -12,18 +12,6 @@ menuconfig LIRC_STAGING if LIRC_STAGING -config LIRC_SASEM - tristate "Sasem USB IR Remote" - depends on LIRC && USB - help - Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module - -config LIRC_SIR - tristate "Built-in SIR IrDA port" - depends on RC_CORE - help - Driver for the SIR IrDA port - config LIRC_ZILOG tristate "Zilog/Hauppauge IR Transmitter" depends on LIRC && I2C diff --git a/drivers/staging/media/lirc/Makefile b/drivers/staging/media/lirc/Makefile index 28740c94349c..665562436e30 100644 --- a/drivers/staging/media/lirc/Makefile +++ b/drivers/staging/media/lirc/Makefile @@ -3,6 +3,4 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o -obj-$(CONFIG_LIRC_SIR) += lirc_sir.o obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o diff --git a/drivers/staging/media/lirc/lirc_sasem.c b/drivers/staging/media/lirc/lirc_sasem.c deleted file mode 100644 index b0c176e14b6b..000000000000 --- a/drivers/staging/media/lirc/lirc_sasem.c +++ /dev/null @@ -1,899 +0,0 @@ -/* - * lirc_sasem.c - USB remote support for LIRC - * Version 0.5 - * - * Copyright (C) 2004-2005 Oliver Stabel <oliver.stabel@gmx.de> - * Tim Davies <tim@opensystems.net.au> - * - * This driver was derived from: - * Venky Raju <dev@venky.ws> - * "lirc_imon - "LIRC/VFD driver for Ahanix/Soundgraph IMON IR/VFD" - * Paul Miller <pmiller9@users.sourceforge.net>'s 2003-2004 - * "lirc_atiusb - USB remote support for LIRC" - * Culver Consulting Services <henry@culcon.com>'s 2003 - * "Sasem OnAir VFD/IR USB driver" - * - * - * NOTE - The LCDproc iMon driver should work with this module. More info at - * http://www.frogstorm.info/sasem - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/uaccess.h> -#include <linux/usb.h> -#include <linux/ktime.h> - -#include <media/lirc.h> -#include <media/lirc_dev.h> - -#define MOD_AUTHOR "Oliver Stabel <oliver.stabel@gmx.de>, " \ - "Tim Davies <tim@opensystems.net.au>" -#define MOD_DESC "USB Driver for Sasem Remote Controller V1.1" -#define MOD_NAME "lirc_sasem" -#define MOD_VERSION "0.5" - -#define VFD_MINOR_BASE 144 /* Same as LCD */ -#define DEVICE_NAME "lcd%d" - -#define BUF_CHUNK_SIZE 8 -#define BUF_SIZE 128 - -#define IOCTL_LCD_CONTRAST 1 - -/*** P R O T O T Y P E S ***/ - -/* USB Callback prototypes */ -static int sasem_probe(struct usb_interface *interface, - const struct usb_device_id *id); -static void sasem_disconnect(struct usb_interface *interface); -static void usb_rx_callback(struct urb *urb); -static void usb_tx_callback(struct urb *urb); - -/* VFD file_operations function prototypes */ -static int vfd_open(struct inode *inode, struct file *file); -static long vfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg); -static int vfd_close(struct inode *inode, struct file *file); -static ssize_t vfd_write(struct file *file, const char __user *buf, - size_t n_bytes, loff_t *pos); - -/* LIRC driver function prototypes */ -static int ir_open(void *data); -static void ir_close(void *data); - -/*** G L O B A L S ***/ -#define SASEM_DATA_BUF_SZ 32 - -struct sasem_context { - struct usb_device *dev; - int vfd_isopen; /* VFD port has been opened */ - unsigned int vfd_contrast; /* VFD contrast */ - int ir_isopen; /* IR port has been opened */ - int dev_present; /* USB device presence */ - struct mutex ctx_lock; /* to lock this object */ - wait_queue_head_t remove_ok; /* For unexpected USB disconnects */ - - struct lirc_driver *driver; - struct usb_endpoint_descriptor *rx_endpoint; - struct usb_endpoint_descriptor *tx_endpoint; - struct urb *rx_urb; - struct urb *tx_urb; - unsigned char usb_rx_buf[8]; - unsigned char usb_tx_buf[8]; - - struct tx_t { - unsigned char data_buf[SASEM_DATA_BUF_SZ]; /* user data - * buffer - */ - struct completion finished; /* wait for write to finish */ - atomic_t busy; /* write in progress */ - int status; /* status of tx completion */ - } tx; - - /* for dealing with repeat codes (wish there was a toggle bit!) */ - ktime_t presstime; - char lastcode[8]; - int codesaved; -}; - -/* VFD file operations */ -static const struct file_operations vfd_fops = { - .owner = THIS_MODULE, - .open = &vfd_open, - .write = vfd_write, - .unlocked_ioctl = &vfd_ioctl, - .release = &vfd_close, - .llseek = noop_llseek, -}; - -/* USB Device ID for Sasem USB Control Board */ -static struct usb_device_id sasem_usb_id_table[] = { - /* Sasem USB Control Board */ - { USB_DEVICE(0x11ba, 0x0101) }, - /* Terminating entry */ - {} -}; - -/* USB Device data */ -static struct usb_driver sasem_driver = { - .name = MOD_NAME, - .probe = sasem_probe, - .disconnect = sasem_disconnect, - .id_table = sasem_usb_id_table, -}; - -static struct usb_class_driver sasem_class = { - .name = DEVICE_NAME, - .fops = &vfd_fops, - .minor_base = VFD_MINOR_BASE, -}; - -/* to prevent races between open() and disconnect() */ -static DEFINE_MUTEX(disconnect_lock); - -static int debug; - - -/*** M O D U L E C O D E ***/ -MODULE_AUTHOR(MOD_AUTHOR); -MODULE_DESCRIPTION(MOD_DESC); -MODULE_LICENSE("GPL"); -module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)"); - -static void delete_context(struct sasem_context *context) -{ - usb_free_urb(context->tx_urb); /* VFD */ - usb_free_urb(context->rx_urb); /* IR */ - lirc_buffer_free(context->driver->rbuf); - kfree(context->driver->rbuf); - kfree(context->driver); - kfree(context); -} - -static void deregister_from_lirc(struct sasem_context *context) -{ - int retval; - int minor = context->driver->minor; - - retval = lirc_unregister_driver(minor); - if (retval) - dev_err(&context->dev->dev, - "%s: unable to deregister from lirc (%d)\n", - __func__, retval); - else - dev_info(&context->dev->dev, - "Deregistered Sasem driver (minor:%d)\n", minor); -} - -/** - * Called when the VFD device (e.g. /dev/usb/lcd) - * is opened by the application. - */ -static int vfd_open(struct inode *inode, struct file *file) -{ - struct usb_interface *interface; - struct sasem_context *context = NULL; - int subminor; - int retval = 0; - - /* prevent races with disconnect */ - mutex_lock(&disconnect_lock); - - subminor = iminor(inode); - interface = usb_find_interface(&sasem_driver, subminor); - if (!interface) { - pr_err("%s: could not find interface for minor %d\n", - __func__, subminor); - retval = -ENODEV; - goto exit; - } - context = usb_get_intfdata(interface); - - if (!context) { - dev_err(&interface->dev, "no context found for minor %d\n", - subminor); - retval = -ENODEV; - goto exit; - } - - mutex_lock(&context->ctx_lock); - - if (context->vfd_isopen) { - dev_err(&interface->dev, - "%s: VFD port is already open", __func__); - retval = -EBUSY; - } else { - context->vfd_isopen = 1; - file->private_data = context; - dev_info(&interface->dev, "VFD port opened\n"); - } - - mutex_unlock(&context->ctx_lock); - -exit: - mutex_unlock(&disconnect_lock); - return retval; -} - -/** - * Called when the VFD device (e.g. /dev/usb/lcd) - * is closed by the application. - */ -static long vfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct sasem_context *context; - - context = (struct sasem_context *) file->private_data; - - if (!context) { - pr_err("%s: no context for device\n", __func__); - return -ENODEV; - } - - mutex_lock(&context->ctx_lock); - - switch (cmd) { - case IOCTL_LCD_CONTRAST: - if (arg > 1000) - arg = 1000; - context->vfd_contrast = (unsigned int)arg; - break; - default: - pr_info("Unknown IOCTL command\n"); - mutex_unlock(&context->ctx_lock); - return -ENOIOCTLCMD; /* not supported */ - } - - mutex_unlock(&context->ctx_lock); - return 0; -} - -/** - * Called when the VFD device (e.g. /dev/usb/lcd) - * is closed by the application. - */ -static int vfd_close(struct inode *inode, struct file *file) -{ - struct sasem_context *context = NULL; - int retval = 0; - - context = (struct sasem_context *) file->private_data; - - if (!context) { - pr_err("%s: no context for device\n", __func__); - return -ENODEV; - } - - mutex_lock(&context->ctx_lock); - - if (!context->vfd_isopen) { - dev_err(&context->dev->dev, "%s: VFD is not open\n", __func__); - retval = -EIO; - } else { - context->vfd_isopen = 0; - dev_info(&context->dev->dev, "VFD port closed\n"); - if (!context->dev_present && !context->ir_isopen) { - /* Device disconnected before close and IR port is - * not open. If IR port is open, context will be - * deleted by ir_close. - */ - mutex_unlock(&context->ctx_lock); - delete_context(context); - return retval; - } - } - - mutex_unlock(&context->ctx_lock); - return retval; -} - -/** - * Sends a packet to the VFD. - */ -static int send_packet(struct sasem_context *context) -{ - unsigned int pipe; - int interval = 0; - int retval = 0; - - pipe = usb_sndintpipe(context->dev, - context->tx_endpoint->bEndpointAddress); - interval = context->tx_endpoint->bInterval; - - usb_fill_int_urb(context->tx_urb, context->dev, pipe, - context->usb_tx_buf, sizeof(context->usb_tx_buf), - usb_tx_callback, context, interval); - - context->tx_urb->actual_length = 0; - - init_completion(&context->tx.finished); - atomic_set(&context->tx.busy, 1); - - retval = usb_submit_urb(context->tx_urb, GFP_KERNEL); - if (retval) { - atomic_set(&context->tx.busy, 0); - dev_err(&context->dev->dev, "error submitting urb (%d)\n", - retval); - } else { - /* Wait for transmission to complete (or abort) */ - mutex_unlock(&context->ctx_lock); - wait_for_completion(&context->tx.finished); - mutex_lock(&context->ctx_lock); - - retval = context->tx.status; - if (retval) - dev_err(&context->dev->dev, - "packet tx failed (%d)\n", retval); - } - - return retval; -} - -/** - * Writes data to the VFD. The Sasem VFD is 2x16 characters - * and requires data in 9 consecutive USB interrupt packets, - * each packet carrying 8 bytes. - */ -static ssize_t vfd_write(struct file *file, const char __user *buf, - size_t n_bytes, loff_t *pos) -{ - int i; - int retval = 0; - struct sasem_context *context; - int *data_buf = NULL; - - context = (struct sasem_context *) file->private_data; - if (!context) { - pr_err("%s: no context for device\n", __func__); - return -ENODEV; - } - - mutex_lock(&context->ctx_lock); - - if (!context->dev_present) { - pr_err("%s: no Sasem device present\n", __func__); - retval = -ENODEV; - goto exit; - } - - if (n_bytes <= 0 || n_bytes > SASEM_DATA_BUF_SZ) { - dev_err(&context->dev->dev, "%s: invalid payload size\n", - __func__); - retval = -EINVAL; - goto exit; - } - - data_buf = memdup_user(buf, n_bytes); - if (IS_ERR(data_buf)) { - mutex_unlock(&context->ctx_lock); - return PTR_ERR(data_buf); - } - - memcpy(context->tx.data_buf, data_buf, n_bytes); - - /* Pad with spaces */ - for (i = n_bytes; i < SASEM_DATA_BUF_SZ; ++i) - context->tx.data_buf[i] = ' '; - - /* Nine 8 byte packets to be sent */ - /* NOTE: "\x07\x01\0\0\0\0\0\0" or "\x0c\0\0\0\0\0\0\0" - * will clear the VFD - */ - for (i = 0; i < 9; i++) { - switch (i) { - case 0: - memcpy(context->usb_tx_buf, "\x07\0\0\0\0\0\0\0", 8); - context->usb_tx_buf[1] = (context->vfd_contrast) ? - (0x2B - (context->vfd_contrast - 1) / 250) - : 0x2B; - break; - case 1: - memcpy(context->usb_tx_buf, "\x09\x01\0\0\0\0\0\0", 8); - break; - case 2: - memcpy(context->usb_tx_buf, "\x0b\x01\0\0\0\0\0\0", 8); - break; - case 3: - memcpy(context->usb_tx_buf, context->tx.data_buf, 8); - break; - case 4: - memcpy(context->usb_tx_buf, - context->tx.data_buf + 8, 8); - break; - case 5: - memcpy(context->usb_tx_buf, "\x09\x01\0\0\0\0\0\0", 8); - break; - case 6: - memcpy(context->usb_tx_buf, "\x0b\x02\0\0\0\0\0\0", 8); - break; - case 7: - memcpy(context->usb_tx_buf, - context->tx.data_buf + 16, 8); - break; - case 8: - memcpy(context->usb_tx_buf, - context->tx.data_buf + 24, 8); - break; - } - retval = send_packet(context); - if (retval) { - dev_err(&context->dev->dev, - "send packet failed for packet #%d\n", i); - goto exit; - } - } -exit: - - mutex_unlock(&context->ctx_lock); - kfree(data_buf); - - return (!retval) ? n_bytes : retval; -} - -/** - * Callback function for USB core API: transmit data - */ -static void usb_tx_callback(struct urb *urb) -{ - struct sasem_context *context; - - if (!urb) - return; - context = (struct sasem_context *) urb->context; - if (!context) - return; - - context->tx.status = urb->status; - - /* notify waiters that write has finished */ - atomic_set(&context->tx.busy, 0); - complete(&context->tx.finished); -} - -/** - * Called by lirc_dev when the application opens /dev/lirc - */ -static int ir_open(void *data) -{ - int retval = 0; - struct sasem_context *context; - - /* prevent races with disconnect */ - mutex_lock(&disconnect_lock); - - context = data; - - mutex_lock(&context->ctx_lock); - - if (context->ir_isopen) { - dev_err(&context->dev->dev, "%s: IR port is already open\n", - __func__); - retval = -EBUSY; - goto exit; - } - - usb_fill_int_urb(context->rx_urb, context->dev, - usb_rcvintpipe(context->dev, - context->rx_endpoint->bEndpointAddress), - context->usb_rx_buf, sizeof(context->usb_rx_buf), - usb_rx_callback, context, context->rx_endpoint->bInterval); - - retval = usb_submit_urb(context->rx_urb, GFP_KERNEL); - - if (retval) - dev_err(&context->dev->dev, - "usb_submit_urb failed for ir_open (%d)\n", retval); - else { - context->ir_isopen = 1; - dev_info(&context->dev->dev, "IR port opened\n"); - } - -exit: - mutex_unlock(&context->ctx_lock); - - mutex_unlock(&disconnect_lock); - return retval; -} - -/** - * Called by lirc_dev when the application closes /dev/lirc - */ -static void ir_close(void *data) -{ - struct sasem_context *context; - - context = data; - if (!context) { - pr_err("%s: no context for device\n", __func__); - return; - } - - mutex_lock(&context->ctx_lock); - - usb_kill_urb(context->rx_urb); - context->ir_isopen = 0; - pr_info("IR port closed\n"); - - if (!context->dev_present) { - - /* - * Device disconnected while IR port was - * still open. Driver was not deregistered - * at disconnect time, so do it now. - */ - deregister_from_lirc(context); - if (!context->vfd_isopen) { - mutex_unlock(&context->ctx_lock); - delete_context(context); - return; - } - /* If VFD port is open, context will be deleted by vfd_close */ - } - - mutex_unlock(&context->ctx_lock); -} - -/** - * Process the incoming packet - */ -static void incoming_packet(struct sasem_context *context, - struct urb *urb) -{ - int len = urb->actual_length; - unsigned char *buf = urb->transfer_buffer; - u64 ns; - ktime_t kt; - - if (len != 8) { - dev_warn(&context->dev->dev, - "%s: invalid incoming packet size (%d)\n", - __func__, len); - return; - } - - if (debug) - dev_info(&context->dev->dev, "Incoming data: %*ph\n", len, buf); - /* - * Lirc could deal with the repeat code, but we really need to block it - * if it arrives too late. Otherwise we could repeat the wrong code. - */ - - /* get the time since the last button press */ - kt = ktime_get(); - ns = ktime_to_ns(ktime_sub(kt, context->presstime)); - - if (memcmp(buf, "\x08\0\0\0\0\0\0\0", 8) == 0) { - /* - * the repeat code is being sent, so we copy - * the old code to LIRC - */ - - /* - * NOTE: Only if the last code was less than 250ms ago - * - no one should be able to push another (undetected) button - * in that time and then get a false repeat of the previous - * press but it is long enough for a genuine repeat - */ - if ((ns < 250 * NSEC_PER_MSEC) && (context->codesaved != 0)) { - memcpy(buf, &context->lastcode, 8); - context->presstime = kt; - } - } else { - /* save the current valid code for repeats */ - memcpy(&context->lastcode, buf, 8); - /* - * set flag to signal a valid code was save; - * just for safety reasons - */ - context->codesaved = 1; - context->presstime = kt; - } - - lirc_buffer_write(context->driver->rbuf, buf); - wake_up(&context->driver->rbuf->wait_poll); -} - -/** - * Callback function for USB core API: receive data - */ -static void usb_rx_callback(struct urb *urb) -{ - struct sasem_context *context; - - if (!urb) - return; - context = (struct sasem_context *) urb->context; - if (!context) - return; - - switch (urb->status) { - case -ENOENT: /* usbcore unlink successful! */ - return; - - case 0: - if (context->ir_isopen) - incoming_packet(context, urb); - break; - - default: - dev_warn(&urb->dev->dev, "%s: status (%d): ignored", - __func__, urb->status); - break; - } - - usb_submit_urb(context->rx_urb, GFP_ATOMIC); -} - -/** - * Callback function for USB core API: Probe - */ -static int sasem_probe(struct usb_interface *interface, - const struct usb_device_id *id) -{ - struct usb_device *dev = NULL; - struct usb_host_interface *iface_desc = NULL; - struct usb_endpoint_descriptor *rx_endpoint = NULL; - struct usb_endpoint_descriptor *tx_endpoint = NULL; - struct urb *rx_urb = NULL; - struct urb *tx_urb = NULL; - struct lirc_driver *driver = NULL; - struct lirc_buffer *rbuf = NULL; - int lirc_minor = 0; - int num_endpoints; - int retval = 0; - int vfd_ep_found; - int ir_ep_found; - int alloc_status; - struct sasem_context *context = NULL; - int i; - - dev_info(&interface->dev, "%s: found Sasem device\n", __func__); - - - dev = usb_get_dev(interface_to_usbdev(interface)); - iface_desc = interface->cur_altsetting; - num_endpoints = iface_desc->desc.bNumEndpoints; - - /* - * Scan the endpoint list and set: - * first input endpoint = IR endpoint - * first output endpoint = VFD endpoint - */ - - ir_ep_found = 0; - vfd_ep_found = 0; - - for (i = 0; i < num_endpoints && !(ir_ep_found && vfd_ep_found); ++i) { - - struct usb_endpoint_descriptor *ep; - - ep = &iface_desc->endpoint [i].desc; - - if (!ir_ep_found && - usb_endpoint_is_int_in(ep)) { - - rx_endpoint = ep; - ir_ep_found = 1; - if (debug) - dev_info(&interface->dev, - "%s: found IR endpoint\n", __func__); - - } else if (!vfd_ep_found && - usb_endpoint_is_int_out(ep)) { - tx_endpoint = ep; - vfd_ep_found = 1; - if (debug) - dev_info(&interface->dev, - "%s: found VFD endpoint\n", __func__); - } - } - - /* Input endpoint is mandatory */ - if (!ir_ep_found) { - dev_err(&interface->dev, - "%s: no valid input (IR) endpoint found.\n", __func__); - retval = -ENODEV; - goto exit; - } - - if (!vfd_ep_found) - dev_info(&interface->dev, - "%s: no valid output (VFD) endpoint found.\n", - __func__); - - - /* Allocate memory */ - alloc_status = 0; - - context = kzalloc(sizeof(*context), GFP_KERNEL); - if (!context) { - alloc_status = 1; - goto alloc_status_switch; - } - driver = kzalloc(sizeof(*driver), GFP_KERNEL); - if (!driver) { - alloc_status = 2; - goto alloc_status_switch; - } - rbuf = kmalloc(sizeof(*rbuf), GFP_KERNEL); - if (!rbuf) { - alloc_status = 3; - goto alloc_status_switch; - } - if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) { - dev_err(&interface->dev, - "%s: lirc_buffer_init failed\n", __func__); - alloc_status = 4; - goto alloc_status_switch; - } - rx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!rx_urb) { - alloc_status = 5; - goto alloc_status_switch; - } - if (vfd_ep_found) { - tx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!tx_urb) { - alloc_status = 6; - goto alloc_status_switch; - } - } - - mutex_init(&context->ctx_lock); - - strcpy(driver->name, MOD_NAME); - driver->minor = -1; - driver->code_length = 64; - driver->sample_rate = 0; - driver->features = LIRC_CAN_REC_LIRCCODE; - driver->data = context; - driver->rbuf = rbuf; - driver->set_use_inc = ir_open; - driver->set_use_dec = ir_close; - driver->dev = &interface->dev; - driver->owner = THIS_MODULE; - - mutex_lock(&context->ctx_lock); - - lirc_minor = lirc_register_driver(driver); - if (lirc_minor < 0) { - dev_err(&interface->dev, - "%s: lirc_register_driver failed\n", __func__); - alloc_status = 7; - retval = lirc_minor; - goto unlock; - } else - dev_info(&interface->dev, - "%s: Registered Sasem driver (minor:%d)\n", - __func__, lirc_minor); - - /* Needed while unregistering! */ - driver->minor = lirc_minor; - - context->dev = dev; - context->dev_present = 1; - context->rx_endpoint = rx_endpoint; - context->rx_urb = rx_urb; - if (vfd_ep_found) { - context->tx_endpoint = tx_endpoint; - context->tx_urb = tx_urb; - context->vfd_contrast = 1000; /* range 0 - 1000 */ - } - context->driver = driver; - - usb_set_intfdata(interface, context); - - if (vfd_ep_found) { - - if (debug) - dev_info(&interface->dev, - "Registering VFD with sysfs\n"); - if (usb_register_dev(interface, &sasem_class)) - /* Not a fatal error, so ignore */ - dev_info(&interface->dev, - "%s: could not get a minor number for VFD\n", - __func__); - } - - dev_info(&interface->dev, - "%s: Sasem device on usb<%d:%d> initialized\n", - __func__, dev->bus->busnum, dev->devnum); -unlock: - mutex_unlock(&context->ctx_lock); - -alloc_status_switch: - switch (alloc_status) { - - case 7: - if (vfd_ep_found) - usb_free_urb(tx_urb); - case 6: - usb_free_urb(rx_urb); - /* fall-through */ - case 5: - lirc_buffer_free(rbuf); - /* fall-through */ - case 4: - kfree(rbuf); - /* fall-through */ - case 3: - kfree(driver); - /* fall-through */ - case 2: - kfree(context); - context = NULL; - /* fall-through */ - case 1: - if (retval == 0) - retval = -ENOMEM; - } - -exit: - return retval; -} - -/** - * Callback function for USB core API: disconnect - */ -static void sasem_disconnect(struct usb_interface *interface) -{ - struct sasem_context *context; - - /* prevent races with ir_open()/vfd_open() */ - mutex_lock(&disconnect_lock); - - context = usb_get_intfdata(interface); - mutex_lock(&context->ctx_lock); - - dev_info(&interface->dev, "%s: Sasem device disconnected\n", - __func__); - - usb_set_intfdata(interface, NULL); - context->dev_present = 0; - - /* Stop reception */ - usb_kill_urb(context->rx_urb); - - /* Abort ongoing write */ - if (atomic_read(&context->tx.busy)) { - - usb_kill_urb(context->tx_urb); - wait_for_completion(&context->tx.finished); - } - - /* De-register from lirc_dev if IR port is not open */ - if (!context->ir_isopen) - deregister_from_lirc(context); - - usb_deregister_dev(interface, &sasem_class); - - mutex_unlock(&context->ctx_lock); - - if (!context->ir_isopen && !context->vfd_isopen) - delete_context(context); - - mutex_unlock(&disconnect_lock); -} - -module_usb_driver(sasem_driver); diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c deleted file mode 100644 index c6c3de94adaa..000000000000 --- a/drivers/staging/media/lirc/lirc_sir.c +++ /dev/null @@ -1,839 +0,0 @@ -/* - * LIRC SIR driver, (C) 2000 Milan Pikula <www@fornax.sk> - * - * sir_ir - Device driver for use with SIR (serial infra red) - * mode of IrDA on many notebooks. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * 2000/09/16 Frank Przybylski <mail@frankprzybylski.de> : - * added timeout and relaxed pulse detection, removed gap bug - * - * 2000/12/15 Christoph Bartelmus <lirc@bartelmus.de> : - * added support for Tekram Irmate 210 (sending does not work yet, - * kind of disappointing that nobody was able to implement that - * before), - * major clean-up - * - * 2001/02/27 Christoph Bartelmus <lirc@bartelmus.de> : - * added support for StrongARM SA1100 embedded microprocessor - * parts cut'n'pasted from sa1100_ir.c (C) 2000 Russell King - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/sched/signal.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/fs.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/kernel.h> -#include <linux/serial_reg.h> -#include <linux/ktime.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/wait.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/poll.h> -#include <linux/io.h> -#include <asm/irq.h> -#include <linux/fcntl.h> -#include <linux/platform_device.h> - -#include <linux/timer.h> - -#include <media/rc-core.h> - -/* SECTION: Definitions */ - -/*** Tekram dongle ***/ -#ifdef LIRC_SIR_TEKRAM -/* stolen from kernel source */ -/* definitions for Tekram dongle */ -#define TEKRAM_115200 0x00 -#define TEKRAM_57600 0x01 -#define TEKRAM_38400 0x02 -#define TEKRAM_19200 0x03 -#define TEKRAM_9600 0x04 -#define TEKRAM_2400 0x08 - -#define TEKRAM_PW 0x10 /* Pulse select bit */ - -/* 10bit * 1s/115200bit in milliseconds = 87ms*/ -#define TIME_CONST (10000000ul/115200ul) - -#endif - -#ifdef LIRC_SIR_ACTISYS_ACT200L -static void init_act200(void); -#elif defined(LIRC_SIR_ACTISYS_ACT220L) -static void init_act220(void); -#endif - -#define PULSE '[' - -#ifndef LIRC_SIR_TEKRAM -/* 9bit * 1s/115200bit in milli seconds = 78.125ms*/ -#define TIME_CONST (9000000ul/115200ul) -#endif - - -/* timeout for sequences in jiffies (=5/100s), must be longer than TIME_CONST */ -#define SIR_TIMEOUT (HZ*5/100) - -#ifndef LIRC_ON_SA1100 -#ifndef LIRC_IRQ -#define LIRC_IRQ 4 -#endif -#ifndef LIRC_PORT -/* for external dongles, default to com1 */ -#if defined(LIRC_SIR_ACTISYS_ACT200L) || \ - defined(LIRC_SIR_ACTISYS_ACT220L) || \ - defined(LIRC_SIR_TEKRAM) -#define LIRC_PORT 0x3f8 -#else -/* onboard sir ports are typically com3 */ -#define LIRC_PORT 0x3e8 -#endif -#endif - -static int io = LIRC_PORT; -static int irq = LIRC_IRQ; -static int threshold = 3; -#endif - -static DEFINE_SPINLOCK(timer_lock); -static struct timer_list timerlist; -/* time of last signal change detected */ -static ktime_t last; -/* time of last UART data ready interrupt */ -static ktime_t last_intr_time; -static int last_value; -static struct rc_dev *rcdev; - -static struct platform_device *sir_ir_dev; - -static DEFINE_SPINLOCK(hardware_lock); - -static bool debug; - -/* SECTION: Prototypes */ - -/* Communication with user-space */ -static void add_read_queue(int flag, unsigned long val); -static int init_chrdev(void); -/* Hardware */ -static irqreturn_t sir_interrupt(int irq, void *dev_id); -static void send_space(unsigned long len); -static void send_pulse(unsigned long len); -static int init_hardware(void); -static void drop_hardware(void); -/* Initialisation */ -static int init_port(void); -static void drop_port(void); - -static inline unsigned int sinp(int offset) -{ - return inb(io + offset); -} - -static inline void soutp(int offset, int value) -{ - outb(value, io + offset); -} - -#ifndef MAX_UDELAY_MS -#define MAX_UDELAY_US 5000 -#else -#define MAX_UDELAY_US (MAX_UDELAY_MS*1000) -#endif - -static void safe_udelay(unsigned long usecs) -{ - while (usecs > MAX_UDELAY_US) { - udelay(MAX_UDELAY_US); - usecs -= MAX_UDELAY_US; - } - udelay(usecs); -} - -/* SECTION: Communication with user-space */ -static int sir_tx_ir(struct rc_dev *dev, unsigned int *tx_buf, - unsigned int count) -{ - unsigned long flags; - int i; - - local_irq_save(flags); - for (i = 0; i < count;) { - if (tx_buf[i]) - send_pulse(tx_buf[i]); - i++; - if (i >= count) - break; - if (tx_buf[i]) - send_space(tx_buf[i]); - i++; - } - local_irq_restore(flags); - - return count; -} - -static void add_read_queue(int flag, unsigned long val) -{ - DEFINE_IR_RAW_EVENT(ev); - - pr_debug("add flag %d with val %lu\n", flag, val); - - /* - * statistically, pulses are ~TIME_CONST/2 too long. we could - * maybe make this more exact, but this is good enough - */ - if (flag) { - /* pulse */ - if (val > TIME_CONST / 2) - val -= TIME_CONST / 2; - else /* should not ever happen */ - val = 1; - ev.pulse = true; - } else { - val += TIME_CONST / 2; - } - ev.duration = US_TO_NS(val); - - ir_raw_event_store_with_filter(rcdev, &ev); -} - -static int init_chrdev(void) -{ - rcdev = devm_rc_allocate_device(&sir_ir_dev->dev, RC_DRIVER_IR_RAW); - if (!rcdev) - return -ENOMEM; - - rcdev->input_phys = KBUILD_MODNAME "/input0"; - rcdev->input_id.bustype = BUS_HOST; - rcdev->input_id.vendor = 0x0001; - rcdev->input_id.product = 0x0001; - rcdev->input_id.version = 0x0100; - rcdev->tx_ir = sir_tx_ir; - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER; - rcdev->map_name = RC_MAP_RC6_MCE; - rcdev->timeout = IR_DEFAULT_TIMEOUT; - rcdev->dev.parent = &sir_ir_dev->dev; - - return devm_rc_register_device(&sir_ir_dev->dev, rcdev); -} - -/* SECTION: Hardware */ -static void sir_timeout(unsigned long data) -{ - /* - * if last received signal was a pulse, but receiving stopped - * within the 9 bit frame, we need to finish this pulse and - * simulate a signal change to from pulse to space. Otherwise - * upper layers will receive two sequences next time. - */ - - unsigned long flags; - unsigned long pulse_end; - - /* avoid interference with interrupt */ - spin_lock_irqsave(&timer_lock, flags); - if (last_value) { - /* clear unread bits in UART and restart */ - outb(UART_FCR_CLEAR_RCVR, io + UART_FCR); - /* determine 'virtual' pulse end: */ - pulse_end = min_t(unsigned long, - ktime_us_delta(last, last_intr_time), - IR_MAX_DURATION); - dev_dbg(&sir_ir_dev->dev, "timeout add %d for %lu usec\n", - last_value, pulse_end); - add_read_queue(last_value, pulse_end); - last_value = 0; - last = last_intr_time; - } - spin_unlock_irqrestore(&timer_lock, flags); - ir_raw_event_handle(rcdev); -} - -static irqreturn_t sir_interrupt(int irq, void *dev_id) -{ - unsigned char data; - ktime_t curr_time; - static unsigned long delt; - unsigned long deltintr; - unsigned long flags; - int iir, lsr; - - while ((iir = inb(io + UART_IIR) & UART_IIR_ID)) { - switch (iir&UART_IIR_ID) { /* FIXME toto treba preriedit */ - case UART_IIR_MSI: - (void) inb(io + UART_MSR); - break; - case UART_IIR_RLSI: - (void) inb(io + UART_LSR); - break; - case UART_IIR_THRI: -#if 0 - if (lsr & UART_LSR_THRE) /* FIFO is empty */ - outb(data, io + UART_TX) -#endif - break; - case UART_IIR_RDI: - /* avoid interference with timer */ - spin_lock_irqsave(&timer_lock, flags); - do { - del_timer(&timerlist); - data = inb(io + UART_RX); - curr_time = ktime_get(); - delt = min_t(unsigned long, - ktime_us_delta(last, curr_time), - IR_MAX_DURATION); - deltintr = min_t(unsigned long, - ktime_us_delta(last_intr_time, - curr_time), - IR_MAX_DURATION); - dev_dbg(&sir_ir_dev->dev, "t %lu, d %d\n", - deltintr, (int)data); - /* - * if nothing came in last X cycles, - * it was gap - */ - if (deltintr > TIME_CONST * threshold) { - if (last_value) { - dev_dbg(&sir_ir_dev->dev, "GAP\n"); - /* simulate signal change */ - add_read_queue(last_value, - delt - - deltintr); - last_value = 0; - last = last_intr_time; - delt = deltintr; - } - } - data = 1; - if (data ^ last_value) { - /* - * deltintr > 2*TIME_CONST, remember? - * the other case is timeout - */ - add_read_queue(last_value, - delt-TIME_CONST); - last_value = data; - last = curr_time; - last = ktime_sub_us(last, - TIME_CONST); - } - last_intr_time = curr_time; - if (data) { - /* - * start timer for end of - * sequence detection - */ - timerlist.expires = jiffies + - SIR_TIMEOUT; - add_timer(&timerlist); - } - - lsr = inb(io + UART_LSR); - } while (lsr & UART_LSR_DR); /* data ready */ - spin_unlock_irqrestore(&timer_lock, flags); - break; - default: - break; - } - } - ir_raw_event_handle(rcdev); - return IRQ_RETVAL(IRQ_HANDLED); -} - -static void send_space(unsigned long len) -{ - safe_udelay(len); -} - -static void send_pulse(unsigned long len) -{ - long bytes_out = len / TIME_CONST; - - if (bytes_out == 0) - bytes_out++; - - while (bytes_out--) { - outb(PULSE, io + UART_TX); - /* FIXME treba seriozne cakanie z char/serial.c */ - while (!(inb(io + UART_LSR) & UART_LSR_THRE)) - ; - } -} - -static int init_hardware(void) -{ - unsigned long flags; - - spin_lock_irqsave(&hardware_lock, flags); - /* reset UART */ -#if defined(LIRC_SIR_TEKRAM) - /* disable FIFO */ - soutp(UART_FCR, - UART_FCR_CLEAR_RCVR| - UART_FCR_CLEAR_XMIT| - UART_FCR_TRIGGER_1); - - /* Set DLAB 0. */ - soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); - - /* First of all, disable all interrupts */ - soutp(UART_IER, sinp(UART_IER) & - (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); - - /* Set DLAB 1. */ - soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB); - - /* Set divisor to 12 => 9600 Baud */ - soutp(UART_DLM, 0); - soutp(UART_DLL, 12); - - /* Set DLAB 0. */ - soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); - - /* power supply */ - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); - safe_udelay(50*1000); - - /* -DTR low -> reset PIC */ - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2); - udelay(1*1000); - - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); - udelay(100); - - - /* -RTS low -> send control byte */ - soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2); - udelay(7); - soutp(UART_TX, TEKRAM_115200|TEKRAM_PW); - - /* one byte takes ~1042 usec to transmit at 9600,8N1 */ - udelay(1500); - - /* back to normal operation */ - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); - udelay(50); - - udelay(1500); - - /* read previous control byte */ - pr_info("0x%02x\n", sinp(UART_RX)); - - /* Set DLAB 1. */ - soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB); - - /* Set divisor to 1 => 115200 Baud */ - soutp(UART_DLM, 0); - soutp(UART_DLL, 1); - - /* Set DLAB 0, 8 Bit */ - soutp(UART_LCR, UART_LCR_WLEN8); - /* enable interrupts */ - soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI); -#else - outb(0, io + UART_MCR); - outb(0, io + UART_IER); - /* init UART */ - /* set DLAB, speed = 115200 */ - outb(UART_LCR_DLAB | UART_LCR_WLEN7, io + UART_LCR); - outb(1, io + UART_DLL); outb(0, io + UART_DLM); - /* 7N1+start = 9 bits at 115200 ~ 3 bits at 44000 */ - outb(UART_LCR_WLEN7, io + UART_LCR); - /* FIFO operation */ - outb(UART_FCR_ENABLE_FIFO, io + UART_FCR); - /* interrupts */ - /* outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, io + UART_IER); */ - outb(UART_IER_RDI, io + UART_IER); - /* turn on UART */ - outb(UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2, io + UART_MCR); -#ifdef LIRC_SIR_ACTISYS_ACT200L - init_act200(); -#elif defined(LIRC_SIR_ACTISYS_ACT220L) - init_act220(); -#endif -#endif - spin_unlock_irqrestore(&hardware_lock, flags); - return 0; -} - -static void drop_hardware(void) -{ - unsigned long flags; - - spin_lock_irqsave(&hardware_lock, flags); - - /* turn off interrupts */ - outb(0, io + UART_IER); - - spin_unlock_irqrestore(&hardware_lock, flags); -} - -/* SECTION: Initialisation */ - -static int init_port(void) -{ - int retval; - - /* get I/O port access and IRQ line */ - if (!request_region(io, 8, KBUILD_MODNAME)) { - pr_err("i/o port 0x%.4x already in use.\n", io); - return -EBUSY; - } - retval = request_irq(irq, sir_interrupt, 0, - KBUILD_MODNAME, NULL); - if (retval < 0) { - release_region(io, 8); - pr_err("IRQ %d already in use.\n", irq); - return retval; - } - pr_info("I/O port 0x%.4x, IRQ %d.\n", io, irq); - - setup_timer(&timerlist, sir_timeout, 0); - - return 0; -} - -static void drop_port(void) -{ - free_irq(irq, NULL); - del_timer_sync(&timerlist); - release_region(io, 8); -} - -#ifdef LIRC_SIR_ACTISYS_ACT200L -/* Crystal/Cirrus CS8130 IR transceiver, used in Actisys Act200L dongle */ -/* some code borrowed from Linux IRDA driver */ - -/* Register 0: Control register #1 */ -#define ACT200L_REG0 0x00 -#define ACT200L_TXEN 0x01 /* Enable transmitter */ -#define ACT200L_RXEN 0x02 /* Enable receiver */ -#define ACT200L_ECHO 0x08 /* Echo control chars */ - -/* Register 1: Control register #2 */ -#define ACT200L_REG1 0x10 -#define ACT200L_LODB 0x01 /* Load new baud rate count value */ -#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */ - -/* Register 3: Transmit mode register #2 */ -#define ACT200L_REG3 0x30 -#define ACT200L_B0 0x01 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P) */ -#define ACT200L_B1 0x02 /* DataBits, 0=6, 1=7, 2=8, 3=9(8P) */ -#define ACT200L_CHSY 0x04 /* StartBit Synced 0=bittime, 1=startbit */ - -/* Register 4: Output Power register */ -#define ACT200L_REG4 0x40 -#define ACT200L_OP0 0x01 /* Enable LED1C output */ -#define ACT200L_OP1 0x02 /* Enable LED2C output */ -#define ACT200L_BLKR 0x04 - -/* Register 5: Receive Mode register */ -#define ACT200L_REG5 0x50 -#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */ - /*.. other various IRDA bit modes, and TV remote modes..*/ - -/* Register 6: Receive Sensitivity register #1 */ -#define ACT200L_REG6 0x60 -#define ACT200L_RS0 0x01 /* receive threshold bit 0 */ -#define ACT200L_RS1 0x02 /* receive threshold bit 1 */ - -/* Register 7: Receive Sensitivity register #2 */ -#define ACT200L_REG7 0x70 -#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */ - -/* Register 8,9: Baud Rate Divider register #1,#2 */ -#define ACT200L_REG8 0x80 -#define ACT200L_REG9 0x90 - -#define ACT200L_2400 0x5f -#define ACT200L_9600 0x17 -#define ACT200L_19200 0x0b -#define ACT200L_38400 0x05 -#define ACT200L_57600 0x03 -#define ACT200L_115200 0x01 - -/* Register 13: Control register #3 */ -#define ACT200L_REG13 0xd0 -#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */ - -/* Register 15: Status register */ -#define ACT200L_REG15 0xf0 - -/* Register 21: Control register #4 */ -#define ACT200L_REG21 0x50 -#define ACT200L_EXCK 0x02 /* Disable clock output driver */ -#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */ - -static void init_act200(void) -{ - int i; - __u8 control[] = { - ACT200L_REG15, - ACT200L_REG13 | ACT200L_SHDW, - ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL, - ACT200L_REG13, - ACT200L_REG7 | ACT200L_ENPOS, - ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1, - ACT200L_REG5 | ACT200L_RWIDL, - ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR, - ACT200L_REG3 | ACT200L_B0, - ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN, - ACT200L_REG8 | (ACT200L_115200 & 0x0f), - ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f), - ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE - }; - - /* Set DLAB 1. */ - soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8); - - /* Set divisor to 12 => 9600 Baud */ - soutp(UART_DLM, 0); - soutp(UART_DLL, 12); - - /* Set DLAB 0. */ - soutp(UART_LCR, UART_LCR_WLEN8); - /* Set divisor to 12 => 9600 Baud */ - - /* power supply */ - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); - for (i = 0; i < 50; i++) - safe_udelay(1000); - - /* Reset the dongle : set RTS low for 25 ms */ - soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2); - for (i = 0; i < 25; i++) - udelay(1000); - - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); - udelay(100); - - /* Clear DTR and set RTS to enter command mode */ - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2); - udelay(7); - - /* send out the control register settings for 115K 7N1 SIR operation */ - for (i = 0; i < sizeof(control); i++) { - soutp(UART_TX, control[i]); - /* one byte takes ~1042 usec to transmit at 9600,8N1 */ - udelay(1500); - } - - /* back to normal operation */ - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); - udelay(50); - - udelay(1500); - soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB); - - /* Set DLAB 1. */ - soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7); - - /* Set divisor to 1 => 115200 Baud */ - soutp(UART_DLM, 0); - soutp(UART_DLL, 1); - - /* Set DLAB 0. */ - soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); - - /* Set DLAB 0, 7 Bit */ - soutp(UART_LCR, UART_LCR_WLEN7); - - /* enable interrupts */ - soutp(UART_IER, sinp(UART_IER)|UART_IER_RDI); -} -#endif - -#ifdef LIRC_SIR_ACTISYS_ACT220L -/* - * Derived from linux IrDA driver (net/irda/actisys.c) - * Drop me a mail for any kind of comment: maxx@spaceboyz.net - */ - -void init_act220(void) -{ - int i; - - /* DLAB 1 */ - soutp(UART_LCR, UART_LCR_DLAB|UART_LCR_WLEN7); - - /* 9600 baud */ - soutp(UART_DLM, 0); - soutp(UART_DLL, 12); - - /* DLAB 0 */ - soutp(UART_LCR, UART_LCR_WLEN7); - - /* reset the dongle, set DTR low for 10us */ - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_OUT2); - udelay(10); - - /* back to normal (still 9600) */ - soutp(UART_MCR, UART_MCR_DTR|UART_MCR_RTS|UART_MCR_OUT2); - - /* - * send RTS pulses until we reach 115200 - * i hope this is really the same for act220l/act220l+ - */ - for (i = 0; i < 3; i++) { - udelay(10); - /* set RTS low for 10 us */ - soutp(UART_MCR, UART_MCR_DTR|UART_MCR_OUT2); - udelay(10); - /* set RTS high for 10 us */ - soutp(UART_MCR, UART_MCR_RTS|UART_MCR_DTR|UART_MCR_OUT2); - } - - /* back to normal operation */ - udelay(1500); /* better safe than sorry ;) */ - - /* Set DLAB 1. */ - soutp(UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN7); - - /* Set divisor to 1 => 115200 Baud */ - soutp(UART_DLM, 0); - soutp(UART_DLL, 1); - - /* Set DLAB 0, 7 Bit */ - /* The dongle doesn't seem to have any problems with operation at 7N1 */ - soutp(UART_LCR, UART_LCR_WLEN7); - - /* enable interrupts */ - soutp(UART_IER, UART_IER_RDI); -} -#endif - -static int init_sir_ir(void) -{ - int retval; - - retval = init_port(); - if (retval < 0) - return retval; - init_hardware(); - pr_info("Installed.\n"); - return 0; -} - -static int sir_ir_probe(struct platform_device *dev) -{ - return 0; -} - -static int sir_ir_remove(struct platform_device *dev) -{ - return 0; -} - -static struct platform_driver sir_ir_driver = { - .probe = sir_ir_probe, - .remove = sir_ir_remove, - .driver = { - .name = "sir_ir", - }, -}; - -static int __init sir_ir_init(void) -{ - int retval; - - retval = platform_driver_register(&sir_ir_driver); - if (retval) { - pr_err("Platform driver register failed!\n"); - return -ENODEV; - } - - sir_ir_dev = platform_device_alloc("sir_ir", 0); - if (!sir_ir_dev) { - pr_err("Platform device alloc failed!\n"); - retval = -ENOMEM; - goto pdev_alloc_fail; - } - - retval = platform_device_add(sir_ir_dev); - if (retval) { - pr_err("Platform device add failed!\n"); - retval = -ENODEV; - goto pdev_add_fail; - } - - retval = init_chrdev(); - if (retval < 0) - goto fail; - - retval = init_sir_ir(); - if (retval) - goto fail; - - return 0; - -fail: - platform_device_del(sir_ir_dev); -pdev_add_fail: - platform_device_put(sir_ir_dev); -pdev_alloc_fail: - platform_driver_unregister(&sir_ir_driver); - return retval; -} - -static void __exit sir_ir_exit(void) -{ - drop_hardware(); - drop_port(); - platform_device_unregister(sir_ir_dev); - platform_driver_unregister(&sir_ir_driver); - pr_info("Uninstalled.\n"); -} - -module_init(sir_ir_init); -module_exit(sir_ir_exit); - -#ifdef LIRC_SIR_TEKRAM -MODULE_DESCRIPTION("Infrared receiver driver for Tekram Irmate 210"); -MODULE_AUTHOR("Christoph Bartelmus"); -#elif defined(LIRC_SIR_ACTISYS_ACT200L) -MODULE_DESCRIPTION("LIRC driver for Actisys Act200L"); -MODULE_AUTHOR("Karl Bongers"); -#elif defined(LIRC_SIR_ACTISYS_ACT220L) -MODULE_DESCRIPTION("LIRC driver for Actisys Act220L(+)"); -MODULE_AUTHOR("Jan Roemisch"); -#else -MODULE_DESCRIPTION("Infrared receiver driver for SIR type serial ports"); -MODULE_AUTHOR("Milan Pikula"); -#endif -MODULE_LICENSE("GPL"); - -module_param(io, int, S_IRUGO); -MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); - -module_param(irq, int, S_IRUGO); -MODULE_PARM_DESC(irq, "Interrupt (4 or 3)"); - -module_param(threshold, int, S_IRUGO); -MODULE_PARM_DESC(threshold, "space detection threshold (3)"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable debugging messages"); diff --git a/drivers/staging/media/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c index e4a533b6beb3..8ce1db04414a 100644 --- a/drivers/staging/media/lirc/lirc_zilog.c +++ b/drivers/staging/media/lirc/lirc_zilog.c @@ -1475,7 +1475,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) ir = get_ir_device_by_adapter(adap); if (ir == NULL) { ir = kzalloc(sizeof(struct IR), GFP_KERNEL); - if (ir == NULL) { + if (!ir) { ret = -ENOMEM; goto out_no_ir; } @@ -1515,7 +1515,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) /* Set up a struct IR_tx instance */ tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL); - if (tx == NULL) { + if (!tx) { ret = -ENOMEM; goto out_put_xx; } @@ -1559,7 +1559,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) /* Set up a struct IR_rx instance */ rx = kzalloc(sizeof(struct IR_rx), GFP_KERNEL); - if (rx == NULL) { + if (!rx) { ret = -ENOMEM; goto out_put_xx; } @@ -1597,7 +1597,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) i2c_set_clientdata(client, NULL); put_ir_rx(rx, true); ir->l.features &= ~LIRC_CAN_REC_LIRCCODE; - goto out_put_xx; + goto out_put_tx; } /* Proceed only if the Tx client is also ready */ @@ -1637,6 +1637,7 @@ out_ok: out_put_xx: if (rx != NULL) put_ir_rx(rx, true); +out_put_tx: if (tx != NULL) put_ir_tx(tx, true); out_put_ir: diff --git a/drivers/staging/media/omap4iss/iss_csi2.c b/drivers/staging/media/omap4iss/iss_csi2.c index f71d5f2f179f..f6acc541e8a2 100644 --- a/drivers/staging/media/omap4iss/iss_csi2.c +++ b/drivers/staging/media/omap4iss/iss_csi2.c @@ -1268,7 +1268,7 @@ static int csi2_init_entities(struct iss_csi2_device *csi2, const char *subname) snprintf(name, sizeof(name), "CSI2%s", subname); snprintf(sd->name, sizeof(sd->name), "OMAP4 ISS %s", name); - sd->grp_id = 1 << 16; /* group ID for iss subdevs */ + sd->grp_id = BIT(16); /* group ID for iss subdevs */ v4l2_set_subdevdata(sd, csi2); sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; diff --git a/drivers/staging/media/omap4iss/iss_ipipe.c b/drivers/staging/media/omap4iss/iss_ipipe.c index d38782e8e84c..d86ef8a031f2 100644 --- a/drivers/staging/media/omap4iss/iss_ipipe.c +++ b/drivers/staging/media/omap4iss/iss_ipipe.c @@ -508,7 +508,7 @@ static int ipipe_init_entities(struct iss_ipipe_device *ipipe) v4l2_subdev_init(sd, &ipipe_v4l2_ops); sd->internal_ops = &ipipe_v4l2_internal_ops; strlcpy(sd->name, "OMAP4 ISS ISP IPIPE", sizeof(sd->name)); - sd->grp_id = 1 << 16; /* group ID for iss subdevs */ + sd->grp_id = BIT(16); /* group ID for iss subdevs */ v4l2_set_subdevdata(sd, ipipe); sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; diff --git a/drivers/staging/media/omap4iss/iss_ipipeif.c b/drivers/staging/media/omap4iss/iss_ipipeif.c index 23de8330731d..cb88b2bd0d82 100644 --- a/drivers/staging/media/omap4iss/iss_ipipeif.c +++ b/drivers/staging/media/omap4iss/iss_ipipeif.c @@ -739,7 +739,7 @@ static int ipipeif_init_entities(struct iss_ipipeif_device *ipipeif) v4l2_subdev_init(sd, &ipipeif_v4l2_ops); sd->internal_ops = &ipipeif_v4l2_internal_ops; strlcpy(sd->name, "OMAP4 ISS ISP IPIPEIF", sizeof(sd->name)); - sd->grp_id = 1 << 16; /* group ID for iss subdevs */ + sd->grp_id = BIT(16); /* group ID for iss subdevs */ v4l2_set_subdevdata(sd, ipipeif); sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; diff --git a/drivers/staging/media/omap4iss/iss_resizer.c b/drivers/staging/media/omap4iss/iss_resizer.c index f1d352c711d5..4bbfa20b3c38 100644 --- a/drivers/staging/media/omap4iss/iss_resizer.c +++ b/drivers/staging/media/omap4iss/iss_resizer.c @@ -782,7 +782,7 @@ static int resizer_init_entities(struct iss_resizer_device *resizer) v4l2_subdev_init(sd, &resizer_v4l2_ops); sd->internal_ops = &resizer_v4l2_internal_ops; strlcpy(sd->name, "OMAP4 ISS ISP resizer", sizeof(sd->name)); - sd->grp_id = 1 << 16; /* group ID for iss subdevs */ + sd->grp_id = BIT(16); /* group ID for iss subdevs */ v4l2_set_subdevdata(sd, resizer); sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c index bb0e3b4a4558..0bac58241a22 100644 --- a/drivers/staging/media/omap4iss/iss_video.c +++ b/drivers/staging/media/omap4iss/iss_video.c @@ -128,7 +128,8 @@ static unsigned int iss_video_mbus_to_pix(const struct iss_video *video, pix->width = mbus->width; pix->height = mbus->height; - /* Skip the last format in the loop so that it will be selected if no + /* + * Skip the last format in the loop so that it will be selected if no * match is found. */ for (i = 0; i < ARRAY_SIZE(formats) - 1; ++i) { @@ -138,7 +139,8 @@ static unsigned int iss_video_mbus_to_pix(const struct iss_video *video, min_bpl = pix->width * ALIGN(formats[i].bpp, 8) / 8; - /* Clamp the requested bytes per line value. If the maximum bytes per + /* + * Clamp the requested bytes per line value. If the maximum bytes per * line value is zero, the module doesn't support user configurable line * sizes. Override the requested value with the minimum in that case. */ @@ -172,7 +174,8 @@ static void iss_video_pix_to_mbus(const struct v4l2_pix_format *pix, mbus->width = pix->width; mbus->height = pix->height; - /* Skip the last format in the loop so that it will be selected if no + /* + * Skip the last format in the loop so that it will be selected if no * match is found. */ for (i = 0; i < ARRAY_SIZE(formats) - 1; ++i) { @@ -298,7 +301,8 @@ iss_video_check_format(struct iss_video *video, struct iss_video_fh *vfh) static int iss_video_queue_setup(struct vb2_queue *vq, unsigned int *count, unsigned int *num_planes, - unsigned int sizes[], struct device *alloc_devs[]) + unsigned int sizes[], + struct device *alloc_devs[]) { struct iss_video_fh *vfh = vb2_get_drv_priv(vq); struct iss_video *video = vfh->video; @@ -360,7 +364,8 @@ static void iss_video_buf_queue(struct vb2_buffer *vb) spin_lock_irqsave(&video->qlock, flags); - /* Mark the buffer is faulty and give it back to the queue immediately + /* + * Mark the buffer is faulty and give it back to the queue immediately * if the video node has registered an error. vb2 will perform the same * check when preparing the buffer, but that is inherently racy, so we * need to handle the race condition with an authoritative check here. @@ -443,7 +448,8 @@ struct iss_buffer *omap4iss_video_buffer_next(struct iss_video *video) buf->vb.vb2_buf.timestamp = ktime_get_ns(); - /* Do frame number propagation only if this is the output video node. + /* + * Do frame number propagation only if this is the output video node. * Frame number either comes from the CSI receivers or it gets * incremented here if H3A is not active. * Note: There is no guarantee that the output buffer will finish @@ -605,7 +611,8 @@ iss_video_set_format(struct file *file, void *fh, struct v4l2_format *format) mutex_lock(&video->mutex); - /* Fill the bytesperline and sizeimage fields by converting to media bus + /* + * Fill the bytesperline and sizeimage fields by converting to media bus * format and back to pixel format. */ iss_video_pix_to_mbus(&format->fmt.pix, &fmt); @@ -678,8 +685,9 @@ iss_video_get_selection(struct file *file, void *fh, struct v4l2_selection *sel) if (subdev == NULL) return -EINVAL; - /* Try the get selection operation first and fallback to get format if not - * implemented. + /* + * Try the get selection operation first and fallback to get format if + * not implemented. */ sdsel.pad = pad; ret = v4l2_subdev_call(subdev, pad, get_selection, NULL, &sdsel); @@ -867,7 +875,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) mutex_lock(&video->stream_lock); - /* Start streaming on the pipeline. No link touching an entity in the + /* + * Start streaming on the pipeline. No link touching an entity in the * pipeline can be activated or deactivated once streaming is started. */ pipe = entity->pipe @@ -895,7 +904,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) while ((entity = media_graph_walk_next(&graph))) media_entity_enum_set(&pipe->ent_enum, entity); - /* Verify that the currently configured format matches the output of + /* + * Verify that the currently configured format matches the output of * the connected subdev. */ ret = iss_video_check_format(video, vfh); @@ -905,7 +915,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) video->bpl_padding = ret; video->bpl_value = vfh->format.fmt.pix.bytesperline; - /* Find the ISS video node connected at the far end of the pipeline and + /* + * Find the ISS video node connected at the far end of the pipeline and * update the pipeline. */ far_end = iss_video_far_end(video); @@ -930,7 +941,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) pipe->state |= state; spin_unlock_irqrestore(&pipe->lock, flags); - /* Set the maximum time per frame as the value requested by userspace. + /* + * Set the maximum time per frame as the value requested by userspace. * This is a soft limit that can be overridden if the hardware doesn't * support the request limit. */ @@ -946,7 +958,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) if (ret < 0) goto err_iss_video_check_format; - /* In sensor-to-memory mode, the stream can be started synchronously + /* + * In sensor-to-memory mode, the stream can be started synchronously * to the stream on command. In memory-to-memory mode, it will be * started when buffers are queued on both the input and output. */ diff --git a/drivers/staging/media/s5p-cec/Kconfig b/drivers/staging/media/s5p-cec/Kconfig deleted file mode 100644 index 7a3489df3e70..000000000000 --- a/drivers/staging/media/s5p-cec/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -config VIDEO_SAMSUNG_S5P_CEC - tristate "Samsung S5P CEC driver" - depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_EXYNOS || COMPILE_TEST) - ---help--- - This is a driver for Samsung S5P HDMI CEC interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. - diff --git a/drivers/staging/media/s5p-cec/TODO b/drivers/staging/media/s5p-cec/TODO deleted file mode 100644 index 64f21bab38f5..000000000000 --- a/drivers/staging/media/s5p-cec/TODO +++ /dev/null @@ -1,7 +0,0 @@ -This driver requires that userspace sets the physical address. -However, this should be passed on from the corresponding -Samsung HDMI driver. - -We have to wait until the HDMI notifier framework has been merged -in order to handle this gracefully, until that time this driver -has to remain in staging. diff --git a/drivers/staging/media/st-cec/Kconfig b/drivers/staging/media/st-cec/Kconfig deleted file mode 100644 index c04283db58d6..000000000000 --- a/drivers/staging/media/st-cec/Kconfig +++ /dev/null @@ -1,8 +0,0 @@ -config VIDEO_STI_HDMI_CEC - tristate "STMicroelectronics STiH4xx HDMI CEC driver" - depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_STI || COMPILE_TEST) - ---help--- - This is a driver for STIH4xx HDMI CEC interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. diff --git a/drivers/staging/media/st-cec/TODO b/drivers/staging/media/st-cec/TODO deleted file mode 100644 index c61289742c5c..000000000000 --- a/drivers/staging/media/st-cec/TODO +++ /dev/null @@ -1,7 +0,0 @@ -This driver requires that userspace sets the physical address. -However, this should be passed on from the corresponding -ST HDMI driver. - -We have to wait until the HDMI notifier framework has been merged -in order to handle this gracefully, until that time this driver -has to remain in staging. |