Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Conserve IRQs by setting up portdrv IRQs only when there are users
     (Jan Kiszka)
   - Rework and simplify _OSC negotiation for control of PCIe features
     (Joerg Roedel)
   - Remove struct pci_dev.driver pointer since it's redundant with the
     struct device.driver pointer (Uwe Kleine-König)

  Resource management:
   - Coalesce contiguous host bridge apertures from _CRS to accommodate
     BARs that cover more than one aperture (Kai-Heng Feng)

  Sysfs:
   - Check CAP_SYS_ADMIN before parsing user input (Krzysztof
     Wilczyński)
   - Return -EINVAL consistently from "store" functions (Krzysztof
     Wilczyński)
   - Use sysfs_emit() in endpoint "show" functions to avoid buffer
     overruns (Kunihiko Hayashi)

  PCIe native device hotplug:
   - Ignore Link Down/Up caused by resets during error recovery so
     endpoint drivers can remain bound to the device (Lukas Wunner)

  Virtualization:
   - Avoid bus resets on Atheros QCA6174, where they hang the device
     (Ingmar Klein)
   - Work around Pericom PI7C9X2G switch packet drop erratum by using
     store and forward mode instead of cut-through (Nathan Rossi)
   - Avoid trying to enable AtomicOps on VFs; the PF setting applies to
     all VFs (Selvin Xavier)

  MSI:
   - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
     interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
     Song)

  VPD:
   - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
     in the possible VPD space; use these to simplify the cxgb3 driver
     (Heiner Kallweit)

  Peer-to-peer DMA:
   - Add (not subtract) the bus offset when calculating DMA address
     (Wang Lu)

  ASPM:
   - Re-enable LTR at Downstream Ports so they don't report Unsupported
     Requests when reset or hot-added devices send LTR messages
     (Mingchuang Qiao)

  Apple PCIe controller driver:
   - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
     Zyngier)

  Cadence PCIe controller driver:
   - Return success when probe succeeds instead of falling into error
     path (Li Chen)

  HiSilicon Kirin PCIe controller driver:
   - Reorganize PHY logic and add support for external PHY drivers
     (Mauro Carvalho Chehab)
   - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
     Carvalho Chehab)
   - Add Kirin 970 support (Mauro Carvalho Chehab)
   - Make driver removable (Mauro Carvalho Chehab)

  Intel VMD host bridge driver:
   - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
     enabled (Adrian Huang)
   - Number each controller so we can tell them apart in
     /proc/interrupts (Chunguang Xu)
   - Avoid building on UML because VMD depends on x86 bare metal APIs
     (Johannes Berg)

  Marvell Aardvark PCIe controller driver:
   - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
   - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
   - Downgrade PIO Response Status messages to debug level (Marek Behún)
   - Preserve CRS SV (Config Request Retry Software Visibility) bit in
     emulated Root Control register (Pali Rohár)
   - Fix issue in configuring reference clock (Pali Rohár)
   - Don't clear status bits for masked interrupts (Pali Rohár)
   - Don't mask unused interrupts (Pali Rohár)
   - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
   - Retry config accesses on CRS response (Pali Rohár)
   - Simplify emulated Root Capabilities initialization (Pali Rohár)
   - Fix several link training issues (Pali Rohár)
   - Fix link-up checking via LTSSM (Pali Rohár)
   - Fix reporting of Data Link Layer Link Active (Pali Rohár)
   - Fix emulation of W1C bits (Marek Behún)
   - Fix MSI domain .alloc() method to return zero on success (Marek
     Behún)
   - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
     (Marek Behún)
   - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
     at startup; PCI core will set those as necessary (Pali Rohár)
   - When operating as a Root Port, set class code to "PCI Bridge"
     instead of the default "Mass Storage Controller" (Pali Rohár)
   - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
     implement this per spec (Pali Rohár)
   - Add emulation of option ROM BAR since aardvark doesn't implement
     this per spec (Pali Rohár)

  MediaTek MT7621 PCIe controller driver:
   - Add MediaTek MT7621 PCIe host controller driver and DT binding
     (Sergio Paracuellos)

  Qualcomm PCIe controller driver:
   - Add SC8180x compatible string (Bjorn Andersson)
   - Add endpoint controller driver and DT binding (Manivannan
     Sadhasivam)
   - Restructure to use of_device_get_match_data() (Prasad Malisetty)
   - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)

  Renesas R-Car PCIe controller driver:
   - Remove unnecessary includes (Geert Uytterhoeven)

  Rockchip DesignWare PCIe controller driver:
   - Add DT binding (Simon Xue)

  Socionext UniPhier Pro5 controller driver:
   - Serialize INTx masking/unmasking (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Run dwc .host_init() method before registering MSI interrupt
     handler so we can deal with pending interrupts left by bootloader
     (Bjorn Andersson)
   - Clean up Kconfig dependencies (Andy Shevchenko)
   - Export symbols to allow more modular drivers (Luca Ceresoli)

  TI DRA7xx PCIe controller driver:
   - Allow host and endpoint drivers to be modules (Luca Ceresoli)
   - Enable external clock if present (Luca Ceresoli)

  TI J721E PCIe driver:
   - Disable PHY when probe fails after initializing it (Christophe
     JAILLET)

  MicroSemi Switchtec management driver:
   - Return error to application when command execution fails because an
     out-of-band reset has cleared the device BARs, Memory Space Enable,
     etc (Kelvin Cao)
   - Fix MRPC error status handling issue (Kelvin Cao)
   - Mask out other bits when reading of management VEP instance ID
     (Kelvin Cao)
   - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
     (Kelvin Cao)
   - Add check of event support (Logan Gunthorpe)

  Miscellaneous:
   - Remove unused pci_pool wrappers, which have been replaced by
     dma_pool (Cai Huoqing)
   - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
     Wilczyński)
   - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
     Wilczyński)
   - Fix some sscanf(), sprintf() format mismatches (Krzysztof
     Wilczyński)
   - Update PCI subsystem information in MAINTAINERS (Krzysztof
     Wilczyński)
   - Correct some misspellings (Krzysztof Wilczyński)"

* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
  PCI: Add ACS quirk for Pericom PI7C9X2G switches
  PCI: apple: Configure RID to SID mapper on device addition
  iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
  PCI: apple: Implement MSI support
  PCI: apple: Add INTx and per-port interrupt support
  PCI: kirin: Allow removing the driver
  PCI: kirin: De-init the dwc driver
  PCI: kirin: Disable clkreq during poweroff sequence
  PCI: kirin: Move the power-off code to a common routine
  PCI: kirin: Add power_off support for Kirin 960 PHY
  PCI: kirin: Allow building it as a module
  PCI: kirin: Add MODULE_* macros
  PCI: kirin: Add Kirin 970 compatible
  PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
  PCI: apple: Set up reference clocks when probing
  PCI: apple: Add initial hardware bring-up
  PCI: of: Allow matching of an interrupt-map local to a PCI device
  of/irq: Allow matching of an interrupt-map local to an interrupt controller
  irqdomain: Make of_phandle_args_to_fwspec() generally available
  PCI: Do not enable AtomicOps on VFs
  ...

4 files changed, 12 insertions, 16 deletions

diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index fbc2146050a4..375715b0535f 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -577,7 +577,6 @@ extern u32 osc_sb_native_usb4_control;
 #define OSC_PCI_MSI_SUPPORT			0x00000010
 #define OSC_PCI_EDR_SUPPORT			0x00000080
 #define OSC_PCI_HPX_TYPE_3_SUPPORT		0x00000100
-#define OSC_PCI_SUPPORT_MASKS			0x0000019f
 
 /* PCI Host Bridge _OSC: Capabilities DWORD 3: Control Field */
 #define OSC_PCI_EXPRESS_NATIVE_HP_CONTROL	0x00000001
@@ -587,7 +586,6 @@ extern u32 osc_sb_native_usb4_control;
 #define OSC_PCI_EXPRESS_CAPABILITY_CONTROL	0x00000010
 #define OSC_PCI_EXPRESS_LTR_CONTROL		0x00000020
 #define OSC_PCI_EXPRESS_DPC_CONTROL		0x00000080
-#define OSC_PCI_CONTROL_MASKS			0x000000bf
 
 #define ACPI_GSB_ACCESS_ATTRIB_QUICK		0x00000002
 #define ACPI_GSB_ACCESS_ATTRIB_SEND_RCV         0x00000004
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 9ee238ad29ce..553da4899f55 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -64,6 +64,10 @@ struct irq_fwspec {
 	u32 param[IRQ_DOMAIN_IRQ_SPEC_PARAMS];
 };
 
+/* Conversion function from of_phandle_args fields to fwspec  */
+void of_phandle_args_to_fwspec(struct device_node *np, const u32 *args,
+			       unsigned int count, struct irq_fwspec *fwspec);
+
 /*
  * Should several domains have the same device node, but serve
  * different purposes (for example one domain is for PCI/MSI, and the
diff --git a/include/linux/pci.h b/include/linux/pci.h
index cd8aa6fce204..b4dbcc86b3f1 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -342,7 +342,6 @@ struct pci_dev {
 	u16		pcie_flags_reg;	/* Cached PCIe Capabilities Register */
 	unsigned long	*dma_alias_mask;/* Mask of enabled devfn aliases */
 
-	struct pci_driver *driver;	/* Driver bound to this device */
 	u64		dma_mask;	/* Mask of the bits of bus address this
 					   device implements.  Normally this is
 					   0xffffffff.  You only need to change
@@ -900,7 +899,10 @@ struct pci_driver {
 	struct pci_dynids	dynids;
 };
 
-#define	to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
+static inline struct pci_driver *to_pci_driver(struct device_driver *drv)
+{
+    return drv ? container_of(drv, struct pci_driver, driver) : NULL;
+}
 
 /**
  * PCI_DEVICE - macro used to describe a specific PCI device
@@ -1350,6 +1352,8 @@ void pci_unlock_rescan_remove(void);
 /* Vital Product Data routines */
 ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
 ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
+ssize_t pci_read_vpd_any(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
+ssize_t pci_write_vpd_any(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
 
 /* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
 resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);
@@ -1498,19 +1502,8 @@ int pci_set_vga_state(struct pci_dev *pdev, bool decode,
 #define PCI_IRQ_ALL_TYPES \
 	(PCI_IRQ_LEGACY | PCI_IRQ_MSI | PCI_IRQ_MSIX)
 
-/* kmem_cache style wrapper around pci_alloc_consistent() */
-
 #include <linux/dmapool.h>
 
-#define	pci_pool dma_pool
-#define pci_pool_create(name, pdev, size, align, allocation) \
-		dma_pool_create(name, &pdev->dev, size, align, allocation)
-#define	pci_pool_destroy(pool) dma_pool_destroy(pool)
-#define	pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle)
-#define	pci_pool_zalloc(pool, flags, handle) \
-		dma_pool_zalloc(pool, flags, handle)
-#define	pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr)
-
 struct msix_entry {
 	u32	vector;	/* Kernel uses to write allocated vector */
 	u16	entry;	/* Driver uses to specify entry, OS writes */
@@ -2126,7 +2119,7 @@ void pcibios_disable_device(struct pci_dev *dev);
 void pcibios_set_master(struct pci_dev *dev);
 int pcibios_set_pcie_reset_state(struct pci_dev *dev,
 				 enum pcie_reset_state state);
-int pcibios_add_device(struct pci_dev *dev);
+int pcibios_device_add(struct pci_dev *dev);
 void pcibios_release_device(struct pci_dev *dev);
 #ifdef CONFIG_PCI
 void pcibios_penalize_isa_irq(int irq, int active);
diff --git a/include/linux/switchtec.h b/include/linux/switchtec.h
index 082f1d51957a..be24056ac00f 100644
--- a/include/linux/switchtec.h
+++ b/include/linux/switchtec.h
@@ -19,6 +19,7 @@
 #define SWITCHTEC_EVENT_EN_CLI   BIT(2)
 #define SWITCHTEC_EVENT_EN_IRQ   BIT(3)
 #define SWITCHTEC_EVENT_FATAL    BIT(4)
+#define SWITCHTEC_EVENT_NOT_SUPP BIT(31)
 
 #define SWITCHTEC_DMA_MRPC_EN	BIT(0)