Merge tag 'mac80211-next-for-net-next-2020-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Another set of changes, this time with:
 * lots more S1G band support
 * 6 GHz scanning, finally
 * kernel-doc fixes
 * non-split wiphy dump fixes in nl80211
 * various other small cleanups/features
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 149 insertions, 3 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 53fba39d4ba6..770408b2fdaf 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -151,6 +151,9 @@
 
 #define IEEE80211_ANO_NETTYPE_WILD              15
 
+/* bits unique to S1G beacon */
+#define IEEE80211_S1G_BCN_NEXT_TBTT    0x100
+
 /* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
 #define IEEE80211_CTL_EXT_POLL		0x2000
 #define IEEE80211_CTL_EXT_SPR		0x3000
@@ -554,6 +557,28 @@ static inline bool ieee80211_is_s1g_beacon(__le16 fc)
 }
 
 /**
+ * ieee80211_next_tbtt_present - check if IEEE80211_FTYPE_EXT &&
+ * IEEE80211_STYPE_S1G_BEACON && IEEE80211_S1G_BCN_NEXT_TBTT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_next_tbtt_present(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON) &&
+	       fc & cpu_to_le16(IEEE80211_S1G_BCN_NEXT_TBTT);
+}
+
+/**
+ * ieee80211_is_s1g_short_beacon - check if next tbtt present bit is set. Only
+ * true for S1G beacons when they're short.
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_s1g_short_beacon(__le16 fc)
+{
+	return ieee80211_is_s1g_beacon(fc) && ieee80211_next_tbtt_present(fc);
+}
+
+/**
  * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
  * @fc: frame control bytes in little-endian byteorder
  */
@@ -962,6 +987,25 @@ enum ieee80211_vht_opmode_bits {
 	IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF	= 0x80,
 };
 
+/**
+ * enum ieee80211_s1g_chanwidth
+ * These are defined in IEEE802.11-2016ah Table 10-20
+ * as BSS Channel Width
+ *
+ * @IEEE80211_S1G_CHANWIDTH_1MHZ: 1MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_2MHZ: 2MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_4MHZ: 4MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_8MHZ: 8MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_16MHZ: 16MHz operating channel
+ */
+enum ieee80211_s1g_chanwidth {
+	IEEE80211_S1G_CHANWIDTH_1MHZ = 0,
+	IEEE80211_S1G_CHANWIDTH_2MHZ = 1,
+	IEEE80211_S1G_CHANWIDTH_4MHZ = 3,
+	IEEE80211_S1G_CHANWIDTH_8MHZ = 7,
+	IEEE80211_S1G_CHANWIDTH_16MHZ = 15,
+};
+
 #define WLAN_SA_QUERY_TR_ID_LEN 2
 #define WLAN_MEMBERSHIP_LEN 8
 #define WLAN_USER_POSITION_LEN 16
@@ -1034,6 +1078,13 @@ struct ieee80211_ext {
 			u8 change_seq;
 			u8 variable[0];
 		} __packed s1g_beacon;
+		struct {
+			u8 sa[ETH_ALEN];
+			__le32 timestamp;
+			u8 change_seq;
+			u8 next_tbtt[3];
+			u8 variable[0];
+		} __packed s1g_short_beacon;
 	} u;
 } __packed __aligned(2);
 
@@ -1070,6 +1121,11 @@ struct ieee80211_mgmt {
 		} __packed assoc_resp, reassoc_resp;
 		struct {
 			__le16 capab_info;
+			__le16 status_code;
+			u8 variable[0];
+		} __packed s1g_assoc_resp, s1g_reassoc_resp;
+		struct {
+			__le16 capab_info;
 			__le16 listen_interval;
 			u8 current_ap[ETH_ALEN];
 			/* followed by SSID and Supported rates */
@@ -2294,8 +2350,11 @@ ieee80211_he_6ghz_oper(const struct ieee80211_he_operation *he_oper)
 }
 
 /* HE Spatial Reuse defines */
-#define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT			0x4
-#define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT		0x8
+#define IEEE80211_HE_SPR_PSR_DISALLOWED				BIT(0)
+#define IEEE80211_HE_SPR_NON_SRG_OBSS_PD_SR_DISALLOWED		BIT(1)
+#define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT			BIT(2)
+#define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT		BIT(3)
+#define IEEE80211_HE_SPR_HESIGA_SR_VAL15_ALLOWED		BIT(4)
 
 /*
  * ieee80211_he_spr_size - calculate 802.11ax HE Spatial Reuse IE size
@@ -2330,6 +2389,8 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 }
 
 /* S1G Capabilities Information field */
+#define IEEE80211_S1G_CAPABILITY_LEN	15
+
 #define S1G_CAP0_S1G_LONG	BIT(0)
 #define S1G_CAP0_SGI_1MHZ	BIT(1)
 #define S1G_CAP0_SGI_2MHZ	BIT(2)
@@ -2409,6 +2470,13 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 #define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ	BIT(0)
 #define S1G_OPER_CH_WIDTH_OPER		GENMASK(4, 1)
 
+
+#define LISTEN_INT_USF	GENMASK(15, 14)
+#define LISTEN_INT_UI	GENMASK(13, 0)
+
+#define IEEE80211_MAX_USF	FIELD_MAX(LISTEN_INT_USF)
+#define IEEE80211_MAX_UI	FIELD_MAX(LISTEN_INT_UI)
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
@@ -2808,6 +2876,8 @@ enum ieee80211_eid {
 
 	WLAN_EID_REDUCED_NEIGHBOR_REPORT = 201,
 
+	WLAN_EID_AID_REQUEST = 210,
+	WLAN_EID_AID_RESPONSE = 211,
 	WLAN_EID_S1G_BCN_COMPAT = 213,
 	WLAN_EID_S1G_SHORT_BCN_INTERVAL = 214,
 	WLAN_EID_S1G_CAPABILITIES = 217,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 10c2cc8f0efc..aee47f2b5709 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -269,13 +269,23 @@ struct ieee80211_rate {
  * struct ieee80211_he_obss_pd - AP settings for spatial reuse
  *
  * @enable: is the feature enabled.
+ * @sr_ctrl: The SR Control field of SRP element.
+ * @non_srg_max_offset: non-SRG maximum tx power offset
  * @min_offset: minimal tx power offset an associated station shall use
  * @max_offset: maximum tx power offset an associated station shall use
+ * @bss_color_bitmap: bitmap that indicates the BSS color values used by
+ *	members of the SRG
+ * @partial_bssid_bitmap: bitmap that indicates the partial BSSID values
+ *	used by members of the SRG
  */
 struct ieee80211_he_obss_pd {
 	bool enable;
+	u8 sr_ctrl;
+	u8 non_srg_max_offset;
 	u8 min_offset;
 	u8 max_offset;
+	u8 bss_color_bitmap[8];
+	u8 partial_bssid_bitmap[8];
 };
 
 /**
@@ -2096,6 +2106,27 @@ struct cfg80211_scan_info {
 };
 
 /**
+ * struct cfg80211_scan_6ghz_params - relevant for 6 GHz only
+ *
+ * @short_bssid: short ssid to scan for
+ * @bssid: bssid to scan for
+ * @channel_idx: idx of the channel in the channel array in the scan request
+ *	 which the above info relvant to
+ * @unsolicited_probe: the AP transmits unsolicited probe response every 20 TU
+ * @short_ssid_valid: short_ssid is valid and can be used
+ * @psc_no_listen: when set, and the channel is a PSC channel, no need to wait
+ *       20 TUs before starting to send probe requests.
+ */
+struct cfg80211_scan_6ghz_params {
+	u32 short_ssid;
+	u32 channel_idx;
+	u8 bssid[ETH_ALEN];
+	bool unsolicited_probe;
+	bool short_ssid_valid;
+	bool psc_no_listen;
+};
+
+/**
  * struct cfg80211_scan_request - scan request description
  *
  * @ssids: SSIDs to scan for (active scan only)
@@ -2122,6 +2153,10 @@ struct cfg80211_scan_info {
  * @mac_addr_mask: MAC address mask used with randomisation, bits that
  *	are 0 in the mask should be randomised, bits that are 1 should
  *	be taken from the @mac_addr
+ * @scan_6ghz: relevant for split scan request only,
+ *	true if this is the second scan request
+ * @n_6ghz_params: number of 6 GHz params
+ * @scan_6ghz_params: 6 GHz params
  * @bssid: BSSID to scan for (most commonly, the wildcard BSSID)
  */
 struct cfg80211_scan_request {
@@ -2149,6 +2184,9 @@ struct cfg80211_scan_request {
 	struct cfg80211_scan_info info;
 	bool notified;
 	bool no_cck;
+	bool scan_6ghz;
+	u32 n_6ghz_params;
+	struct cfg80211_scan_6ghz_params *scan_6ghz_params;
 
 	/* keep last */
 	struct ieee80211_channel *channels[];
@@ -2528,6 +2566,8 @@ enum cfg80211_assoc_req_flags {
  * @fils_nonces: FILS nonces (part of AAD) for protecting (Re)Association
  *	Request/Response frame or %NULL if FILS is not used. This field starts
  *	with 16 octets of STA Nonce followed by 16 octets of AP Nonce.
+ * @s1g_capa: S1G capability override
+ * @s1g_capa_mask: S1G capability override mask
  */
 struct cfg80211_assoc_request {
 	struct cfg80211_bss *bss;
@@ -2542,6 +2582,7 @@ struct cfg80211_assoc_request {
 	const u8 *fils_kek;
 	size_t fils_kek_len;
 	const u8 *fils_nonces;
+	struct ieee80211_s1g_cap s1g_capa, s1g_capa_mask;
 };
 
 /**
@@ -4217,6 +4258,8 @@ struct cfg80211_ops {
 /**
  * enum wiphy_flags - wiphy capability flags
  *
+ * @WIPHY_FLAG_SPLIT_SCAN_6GHZ: if set to true, the scan request will be split
+ *	 into two, first for legacy bands and second for UHB.
  * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
  *	wiphy at all
  * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
@@ -4260,7 +4303,7 @@ struct cfg80211_ops {
 enum wiphy_flags {
 	WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK		= BIT(0),
 	/* use hole at 1 */
-	/* use hole at 2 */
+	WIPHY_FLAG_SPLIT_SCAN_6GHZ		= BIT(2),
 	WIPHY_FLAG_NETNS_OK			= BIT(3),
 	WIPHY_FLAG_PS_ON_BY_DEFAULT		= BIT(4),
 	WIPHY_FLAG_4ADDR_AP			= BIT(5),
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e90089d104b0..4747d446179a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -627,6 +627,7 @@ struct ieee80211_fils_discovery {
  * @fils_discovery: FILS discovery configuration
  * @unsol_bcast_probe_resp_interval: Unsolicited broadcast probe response
  *	interval.
+ * @s1g: BSS is S1G BSS (affects Association Request format).
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
@@ -696,6 +697,7 @@ struct ieee80211_bss_conf {
 	struct cfg80211_he_bss_color he_bss_color;
 	struct ieee80211_fils_discovery fils_discovery;
 	u32 unsol_bcast_probe_resp_interval;
+	bool s1g;
 };
 
 /**
@@ -833,6 +835,8 @@ enum mac80211_tx_info_flags {
 
 #define IEEE80211_TX_CTL_STBC_SHIFT		23
 
+#define IEEE80211_TX_RC_S1G_MCS IEEE80211_TX_RC_VHT_MCS
+
 /**
  * enum mac80211_tx_control_flags - flags to describe transmit control
  *
@@ -5403,11 +5407,15 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
  * @IEEE80211_IFACE_ITER_RESUME_ALL: During resume, iterate over all
  *	interfaces, even if they haven't been re-added to the driver yet.
  * @IEEE80211_IFACE_ITER_ACTIVE: Iterate only active interfaces (netdev is up).
+ * @IEEE80211_IFACE_SKIP_SDATA_NOT_IN_DRIVER: Skip any interfaces where SDATA
+ *	is not in the driver.  This may fix crashes during firmware recovery
+ *	for instance.
  */
 enum ieee80211_interface_iteration_flags {
 	IEEE80211_IFACE_ITER_NORMAL	= 0,
 	IEEE80211_IFACE_ITER_RESUME_ALL	= BIT(0),
 	IEEE80211_IFACE_ITER_ACTIVE	= BIT(1),
+	IEEE80211_IFACE_SKIP_SDATA_NOT_IN_DRIVER	= BIT(2),
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index bdc90b8dfd24..47700a2b9af9 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2521,6 +2521,12 @@ enum nl80211_commands {
  *	unsolicited broadcast probe response. It is a nested attribute, see
  *	&enum nl80211_unsol_bcast_probe_resp_attributes.
  *
+ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
+ *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+ *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3007,6 +3013,9 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,
 
+	NL80211_ATTR_S1G_CAPABILITY,
+	NL80211_ATTR_S1G_CAPABILITY_MASK,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -4088,6 +4097,7 @@ enum nl80211_user_reg_hint_type {
  *	receiving frames destined to the local BSS
  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
  *	currently defined
+ * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz
  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
  */
 enum nl80211_survey_info {
@@ -4103,6 +4113,7 @@ enum nl80211_survey_info {
 	NL80211_SURVEY_INFO_TIME_SCAN,
 	NL80211_SURVEY_INFO_PAD,
 	NL80211_SURVEY_INFO_TIME_BSS_RX,
+	NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
 
 	/* keep last */
 	__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -6059,6 +6070,8 @@ enum nl80211_timeout_reason {
  * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
  *	%NL80211_ATTR_SCAN_FREQ_KHZ. This also means
  *	%NL80211_ATTR_SCAN_FREQUENCIES will not be included.
+ * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by
+ *	2.4/5 GHz APs
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
@@ -6075,6 +6088,7 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11,
 	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
 	NL80211_SCAN_FLAG_FREQ_KHZ				= 1<<13,
+	NL80211_SCAN_FLAG_COLOCATED_6GHZ			= 1<<14,
 };
 
 /**
@@ -6977,6 +6991,13 @@ enum nl80211_peer_measurement_ftm_resp {
  *
  * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
  * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum
+ *	tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color
+ *	values used by members of the SRG.
+ * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial
+ *	BSSID values used by members of the SRG.
+ * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element.
  *
  * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
  * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
@@ -6986,6 +7007,10 @@ enum nl80211_obss_pd_attributes {
 
 	NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
 	NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
+	NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET,
+	NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP,
+	NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP,
+	NL80211_HE_OBSS_PD_ATTR_SR_CTRL,
 
 	/* keep last */
 	__NL80211_HE_OBSS_PD_ATTR_LAST,