Merge tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC devicetree updates from Olof Johansson:
 "As with previous release, this continues to be among the largest
  branches we merge, with lots of new contents.

  New things for this release are among other things:

   - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
   - Qualcomm APQ8064 and APQ8084 SoCs and eval boards
   - Nvidia Jetson TK1 development board (Tegra T124-based)

  Two new SoCs that didn't need enough new platform code to stand out
  enough for me to notice when writing the SoC tag, but that adds new DT
  contents are:

   - TI DRA72
   - Marvell Berlin 2Q"

* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
  ARM: dts: add secure firmware support for exynos5420-arndale-octa
  ARM: dts: add pmu sysreg node to exynos3250
  ARM: dts: correct the usb phy node in exynos5800-peach-pi
  ARM: dts: correct the usb phy node in exynos5420-peach-pit
  ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
  ARM: dts: add dts files for exynos3250 SoC
  ARM: dts: add mfc node for exynos5800
  ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
  ARM: dts: enable fimd for exynos5800-peach-pi
  ARM: dts: enable display controller for exynos5800-peach-pi
  ARM: dts: enable hdmi for exynos5800-peach-pi
  ARM: dts: add dts file for exynos5800-peach-pi board
  ARM: dts: add dts file for exynos5800 SoC
  ARM: dts: add dts file for exynos5260-xyref5260 board
  ARM: dts: add dts files for exynos5260 SoC
  ARM: dts: update watchdog node name in exynos5440
  ARM: dts: use key code macros on Origen and Arndale boards
  ARM: dts: enable RTC and WDT nodes on Origen boards
  ARM: dts: qcom: Add APQ8084-MTP board support
  ARM: dts: qcom: Add APQ8084 SoC support
  ...

11 files changed, 239 insertions, 4 deletions

diff --git a/include/dt-bindings/clock/berlin2.h b/include/dt-bindings/clock/berlin2.h
new file mode 100644
index 000000000000..0c30800175df
--- /dev/null
+++ b/include/dt-bindings/clock/berlin2.h
@@ -0,0 +1,45 @@
+/*
+ * Berlin2 BG2/BG2CD clock tree IDs
+ */
+
+#define CLKID_SYS		0
+#define CLKID_CPU		1
+#define CLKID_DRMFIGO		2
+#define CLKID_CFG		3
+#define CLKID_GFX		4
+#define CLKID_ZSP		5
+#define CLKID_PERIF		6
+#define CLKID_PCUBE		7
+#define CLKID_VSCOPE		8
+#define CLKID_NFC_ECC		9
+#define CLKID_VPP		10
+#define CLKID_APP		11
+#define CLKID_AUDIO0		12
+#define CLKID_AUDIO2		13
+#define CLKID_AUDIO3		14
+#define CLKID_AUDIO1		15
+#define CLKID_GFX3D_CORE	16
+#define CLKID_GFX3D_SYS		17
+#define CLKID_ARC		18
+#define CLKID_VIP		19
+#define CLKID_SDIO0XIN		20
+#define CLKID_SDIO1XIN		21
+#define CLKID_GFX3D_EXTRA	22
+#define CLKID_GC360		23
+#define CLKID_SDIO_DLLMST	24
+#define CLKID_GETH0		25
+#define CLKID_GETH1		26
+#define CLKID_SATA		27
+#define CLKID_AHBAPB		28
+#define CLKID_USB0		29
+#define CLKID_USB1		30
+#define CLKID_PBRIDGE		31
+#define CLKID_SDIO0		32
+#define CLKID_SDIO1		33
+#define CLKID_NFC		34
+#define CLKID_SMEMC		35
+#define CLKID_AUDIOHD		36
+#define CLKID_VIDEO0		37
+#define CLKID_VIDEO1		38
+#define CLKID_VIDEO2		39
+#define CLKID_TWD		40
diff --git a/include/dt-bindings/clock/berlin2q.h b/include/dt-bindings/clock/berlin2q.h
new file mode 100644
index 000000000000..287fc3b4afb2
--- /dev/null
+++ b/include/dt-bindings/clock/berlin2q.h
@@ -0,0 +1,31 @@
+/*
+ * Berlin2 BG2Q clock tree IDs
+ */
+
+#define CLKID_SYS		0
+#define CLKID_DRMFIGO		1
+#define CLKID_CFG		2
+#define CLKID_GFX2D		3
+#define CLKID_ZSP		4
+#define CLKID_PERIF		5
+#define CLKID_PCUBE		6
+#define CLKID_VSCOPE		7
+#define CLKID_NFC_ECC		8
+#define CLKID_VPP		9
+#define CLKID_APP		10
+#define CLKID_SDIO0XIN		11
+#define CLKID_SDIO1XIN		12
+#define CLKID_GFX2DAXI		13
+#define CLKID_GETH0		14
+#define CLKID_SATA		15
+#define CLKID_AHBAPB		16
+#define CLKID_USB0		17
+#define CLKID_USB1		18
+#define CLKID_USB2		19
+#define CLKID_USB3		20
+#define CLKID_PBRIDGE		21
+#define CLKID_SDIO		22
+#define CLKID_NFC		23
+#define CLKID_SMEMC		24
+#define CLKID_PCIE		25
+#define CLKID_TWD		26
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index 9a7c4c5a35d1..1118f7a4bca6 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -50,6 +50,7 @@
 #define R8A7790_CLK_SYS_DMAC0		19
 
 /* MSTP3 */
+#define R8A7790_CLK_IIC2		0
 #define R8A7790_CLK_TPU0		4
 #define R8A7790_CLK_MMCIF1		5
 #define R8A7790_CLK_SDHI3		11
@@ -57,6 +58,8 @@
 #define R8A7790_CLK_SDHI1		13
 #define R8A7790_CLK_SDHI0		14
 #define R8A7790_CLK_MMCIF0		15
+#define R8A7790_CLK_IIC0		18
+#define R8A7790_CLK_IIC1		23
 #define R8A7790_CLK_SSUSB		28
 #define R8A7790_CLK_CMT1		29
 #define R8A7790_CLK_USBDMAC0		30
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index c3b0130f56c8..b050d18437ce 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -52,6 +52,8 @@
 #define R8A7791_CLK_SDHI1		12
 #define R8A7791_CLK_SDHI0		14
 #define R8A7791_CLK_MMCIF0		15
+#define R8A7791_CLK_IIC0		18
+#define R8A7791_CLK_IIC1		23
 #define R8A7791_CLK_SSUSB		28
 #define R8A7791_CLK_CMT1		29
 #define R8A7791_CLK_USBDMAC0		30
@@ -62,6 +64,7 @@
 #define R8A7791_CLK_PWM			23
 
 /* MSTP7 */
+#define R8A7791_CLK_EHCI		3
 #define R8A7791_CLK_HSUSB		4
 #define R8A7791_CLK_HSCIF2		13
 #define R8A7791_CLK_SCIF5		14
diff --git a/include/dt-bindings/clock/stih415-clks.h b/include/dt-bindings/clock/stih415-clks.h
new file mode 100644
index 000000000000..0d2c7397e028
--- /dev/null
+++ b/include/dt-bindings/clock/stih415-clks.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH415 SoC.
+ */
+#ifndef _CLK_STIH415
+#define _CLK_STIH415
+
+/* CLOCKGEN A0 */
+#define CLK_ICN_REG		0
+#define CLK_ETH1_PHY		4
+
+/* CLOCKGEN A1 */
+#define CLK_GMAC0_PHY		3
+
+#endif
diff --git a/include/dt-bindings/clock/stih416-clks.h b/include/dt-bindings/clock/stih416-clks.h
new file mode 100644
index 000000000000..552c779eb6af
--- /dev/null
+++ b/include/dt-bindings/clock/stih416-clks.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH416 SoC.
+ */
+#ifndef _CLK_STIH416
+#define _CLK_STIH416
+
+/* CLOCKGEN A0 */
+#define CLK_ICN_REG		0
+#define CLK_ETH1_PHY		4
+
+/* CLOCKGEN A1 */
+#define CLK_GMAC0_PHY		3
+
+#endif
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 404ba7ef7813..1c75b8ca5228 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -62,14 +62,19 @@
 #define OMAP3630_CORE2_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x25a0) (val)
 #define OMAP3_WKUP_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
 #define AM33XX_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define OMAP4_CORE_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x0040) (val)
-#define OMAP4_WKUP_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0xe040) (val)
 #define AM4372_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define OMAP5_CORE_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x2840) (val)
-#define OMAP5_WKUP_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0xc840) (val)
 #define DRA7XX_CORE_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
 
 /*
+ * Macros to allow using the offset from the padconf physical address
+ * instead  of the offset from padconf base.
+ */
+#define OMAP_PADCONF_OFFSET(offset, base_offset)	((offset) - (base_offset))
+
+#define OMAP4_IOPAD(offset, val)	OMAP_PADCONF_OFFSET((offset), 0x0040) (val)
+#define OMAP5_IOPAD(offset, val)	OMAP_PADCONF_OFFSET((offset), 0x0040) (val)
+
+/*
  * Define some commonly used pins configured by the boards.
  * Note that some boards use alternative pins, so check
  * the schematics before using these.
diff --git a/include/dt-bindings/reset-controller/stih415-resets.h b/include/dt-bindings/reset-controller/stih415-resets.h
index c2f8a66913c5..c2329fe29cf6 100644
--- a/include/dt-bindings/reset-controller/stih415-resets.h
+++ b/include/dt-bindings/reset-controller/stih415-resets.h
@@ -22,5 +22,6 @@
 #define STIH415_USB0_SOFTRESET		3
 #define STIH415_USB1_SOFTRESET		4
 #define STIH415_USB2_SOFTRESET		5
+#define STIH415_KEYSCAN_SOFTRESET	6
 
 #endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */
diff --git a/include/dt-bindings/reset-controller/stih416-resets.h b/include/dt-bindings/reset-controller/stih416-resets.h
index 2127743f23e3..fcf9af1ac0b2 100644
--- a/include/dt-bindings/reset-controller/stih416-resets.h
+++ b/include/dt-bindings/reset-controller/stih416-resets.h
@@ -46,5 +46,6 @@
 #define STIH416_COMPO_A_SOFTRESET	25
 #define STIH416_VP8_DEC_SOFTRESET	26
 #define STIH416_VTG_MAIN_SOFTRESET	27
+#define STIH416_KEYSCAN_SOFTRESET	28
 
 #endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH416 */
diff --git a/include/dt-bindings/reset/altr,rst-mgr.h b/include/dt-bindings/reset/altr,rst-mgr.h
new file mode 100644
index 000000000000..3f04908fb87c
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+
+/* MPUMODRST */
+#define CPU0_RESET		0
+#define CPU1_RESET		1
+#define WDS_RESET		2
+#define SCUPER_RESET		3
+#define L2_RESET		4
+
+/* PERMODRST */
+#define EMAC0_RESET		32
+#define EMAC1_RESET		33
+#define USB0_RESET		34
+#define USB1_RESET		35
+#define NAND_RESET		36
+#define QSPI_RESET		37
+#define L4WD0_RESET		38
+#define L4WD1_RESET		39
+#define OSC1TIMER0_RESET	40
+#define OSC1TIMER1_RESET	41
+#define SPTIMER0_RESET		42
+#define SPTIMER1_RESET		43
+#define I2C0_RESET		44
+#define I2C1_RESET		45
+#define I2C2_RESET		46
+#define I2C3_RESET		47
+#define UART0_RESET		48
+#define UART1_RESET		49
+#define SPIM0_RESET		50
+#define SPIM1_RESET		51
+#define SPIS0_RESET		52
+#define SPIS1_RESET		53
+#define SDMMC_RESET		54
+#define CAN0_RESET		55
+#define CAN1_RESET		56
+#define GPIO0_RESET		57
+#define GPIO1_RESET		58
+#define GPIO2_RESET		59
+#define DMA_RESET		60
+#define SDR_RESET		61
+
+/* PER2MODRST */
+#define DMAIF0_RESET		64
+#define DMAIF1_RESET		65
+#define DMAIF2_RESET		66
+#define DMAIF3_RESET		67
+#define DMAIF4_RESET		68
+#define DMAIF5_RESET		69
+#define DMAIF6_RESET		70
+#define DMAIF7_RESET		71
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET		96
+#define LWHPS2FPGA_RESET	97
+#define FPGA2HPS_RESET		98
+
+/* MISCMODRST*/
+#define ROM_RESET		128
+#define OCRAM_RESET		129
+#define SYSMGR_RESET		130
+#define SYSMGRCOLD_RESET	131
+#define FPGAMGR_RESET		132
+#define ACPIDMAP_RESET		133
+#define S2F_RESET		134
+#define S2FCOLD_RESET		135
+#define NRSTPIN_RESET		136
+#define TIMESTAMPCOLD_RESET	137
+#define CLKMGRCOLD_RESET	138
+#define SCANMGR_RESET		139
+#define FRZCTRLCOLD_RESET	140
+#define SYSDBG_RESET		141
+#define DBG_RESET		142
+#define TAPCOLD_RESET		143
+#define SDRCOLD_RESET		144
+
+#endif
diff --git a/include/dt-bindings/soc/qcom,gsbi.h b/include/dt-bindings/soc/qcom,gsbi.h
new file mode 100644
index 000000000000..7ac4292333aa
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,gsbi.h
@@ -0,0 +1,26 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_QCOM_GSBI_H
+#define __DT_BINDINGS_QCOM_GSBI_H
+
+#define GSBI_PROT_IDLE		0
+#define GSBI_PROT_I2C_UIM	1
+#define GSBI_PROT_I2C		2
+#define GSBI_PROT_SPI		3
+#define GSBI_PROT_UART_W_FC	4
+#define GSBI_PROT_UIM		5
+#define GSBI_PROT_I2C_UART	6
+
+#define GSBI_CRCI_QUP		0
+#define GSBI_CRCI_UART		1
+
+#endif