diff options
author | Connor McAdams <conmanx360@gmail.com> | 2018-05-08 13:20:11 -0400 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2018-05-13 09:29:31 +0200 |
commit | 017310fbe7670f522cdde4e68d4e1859f16d2757 (patch) | |
tree | 37e9a72b029cb31fb70966904d7175671350e960 /sound/pci | |
parent | 7cb9d94c05de9eef0af53bf7fcb0168b2e0e2267 (diff) | |
download | linux-stable-017310fbe7670f522cdde4e68d4e1859f16d2757.tar.gz linux-stable-017310fbe7670f522cdde4e68d4e1859f16d2757.tar.bz2 linux-stable-017310fbe7670f522cdde4e68d4e1859f16d2757.zip |
ALSA: hda/ca0132: Add DSP Volume set and New mixers for SBZ + R3Di
Adds lookup table for floating point decibel volume, and new functions
to allow for setting the decibel level on the DSP.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci')
-rw-r--r-- | sound/pci/hda/patch_ca0132.c | 203 |
1 files changed, 202 insertions, 1 deletions
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 60e8a0ce530e..394e604c3787 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -541,6 +541,31 @@ static const struct ca0132_alt_out_set alt_out_presets[] = { } }; +/* + * DSP volume setting structs. Req 1 is left volume, req 2 is right volume, + * and I don't know what the third req is, but it's always zero. I assume it's + * some sort of update or set command to tell the DSP there's new volume info. + */ +#define DSP_VOL_OUT 0 +#define DSP_VOL_IN 1 + +struct ct_dsp_volume_ctl { + hda_nid_t vnid; + int mid; /* module ID*/ + unsigned int reqs[3]; /* scp req ID */ +}; + +static struct ct_dsp_volume_ctl ca0132_alt_vol_ctls[] = { + { .vnid = VNID_SPK, + .mid = 0x32, + .reqs = {3, 4, 2} + }, + { .vnid = VNID_MIC, + .mid = 0x37, + .reqs = {2, 3, 1} + } +}; + enum hda_cmd_vendor_io { /* for DspIO node */ VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000, @@ -3252,6 +3277,24 @@ static unsigned int ca0132_capture_pcm_delay(struct hda_pcm_stream *info, .tlv = { .c = ca0132_volume_tlv }, \ .private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) } +/* + * Creates a mixer control that uses defaults of HDA_CODEC_VOL except for the + * volume put, which is used for setting the DSP volume. This was done because + * the ca0132 functions were taking too much time and causing lag. + */ +#define CA0132_ALT_CODEC_VOL_MONO(xname, nid, channel, dir) \ + { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = xname, \ + .subdevice = HDA_SUBDEV_AMP_FLAG, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ + SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \ + .info = snd_hda_mixer_amp_volume_info, \ + .get = snd_hda_mixer_amp_volume_get, \ + .put = ca0132_alt_volume_put, \ + .tlv = { .c = snd_hda_mixer_amp_tlv }, \ + .private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) } + #define CA0132_CODEC_MUTE_MONO(xname, nid, channel, dir) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = xname, \ @@ -3264,9 +3307,40 @@ static unsigned int ca0132_capture_pcm_delay(struct hda_pcm_stream *info, /* stereo */ #define CA0132_CODEC_VOL(xname, nid, dir) \ CA0132_CODEC_VOL_MONO(xname, nid, 3, dir) +#define CA0132_ALT_CODEC_VOL(xname, nid, dir) \ + CA0132_ALT_CODEC_VOL_MONO(xname, nid, 3, dir) #define CA0132_CODEC_MUTE(xname, nid, dir) \ CA0132_CODEC_MUTE_MONO(xname, nid, 3, dir) +/* lookup tables */ +/* + * Lookup table with decibel values for the DSP. When volume is changed in + * Windows, the DSP is also sent the dB value in floating point. In Windows, + * these values have decimal points, probably because the Windows driver + * actually uses floating point. We can't here, so I made a lookup table of + * values -90 to 9. -90 is the lowest decibel value for both the ADC's and the + * DAC's, and 9 is the maximum. + */ +static const unsigned int float_vol_db_lookup[] = { +0xC2B40000, 0xC2B20000, 0xC2B00000, 0xC2AE0000, 0xC2AC0000, 0xC2AA0000, +0xC2A80000, 0xC2A60000, 0xC2A40000, 0xC2A20000, 0xC2A00000, 0xC29E0000, +0xC29C0000, 0xC29A0000, 0xC2980000, 0xC2960000, 0xC2940000, 0xC2920000, +0xC2900000, 0xC28E0000, 0xC28C0000, 0xC28A0000, 0xC2880000, 0xC2860000, +0xC2840000, 0xC2820000, 0xC2800000, 0xC27C0000, 0xC2780000, 0xC2740000, +0xC2700000, 0xC26C0000, 0xC2680000, 0xC2640000, 0xC2600000, 0xC25C0000, +0xC2580000, 0xC2540000, 0xC2500000, 0xC24C0000, 0xC2480000, 0xC2440000, +0xC2400000, 0xC23C0000, 0xC2380000, 0xC2340000, 0xC2300000, 0xC22C0000, +0xC2280000, 0xC2240000, 0xC2200000, 0xC21C0000, 0xC2180000, 0xC2140000, +0xC2100000, 0xC20C0000, 0xC2080000, 0xC2040000, 0xC2000000, 0xC1F80000, +0xC1F00000, 0xC1E80000, 0xC1E00000, 0xC1D80000, 0xC1D00000, 0xC1C80000, +0xC1C00000, 0xC1B80000, 0xC1B00000, 0xC1A80000, 0xC1A00000, 0xC1980000, +0xC1900000, 0xC1880000, 0xC1800000, 0xC1700000, 0xC1600000, 0xC1500000, +0xC1400000, 0xC1300000, 0xC1200000, 0xC1100000, 0xC1000000, 0xC0E00000, +0xC0C00000, 0xC0A00000, 0xC0800000, 0xC0400000, 0xC0000000, 0xBF800000, +0x00000000, 0x3F800000, 0x40000000, 0x40400000, 0x40800000, 0x40A00000, +0x40C00000, 0x40E00000, 0x41000000, 0x41100000 +}; + /* The following are for tuning of products */ #ifdef ENABLE_TUNING_CONTROLS @@ -4633,6 +4707,41 @@ exit: /* * Volume related */ +/* + * Sets the internal DSP decibel level to match the DAC for output, and the + * ADC for input. Currently only the SBZ sets dsp capture volume level, and + * all alternative codecs set DSP playback volume. + */ +static void ca0132_alt_dsp_volume_put(struct hda_codec *codec, hda_nid_t nid) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int dsp_dir; + unsigned int lookup_val; + + if (nid == VNID_SPK) + dsp_dir = DSP_VOL_OUT; + else + dsp_dir = DSP_VOL_IN; + + lookup_val = spec->vnode_lvol[nid - VNODE_START_NID]; + + dspio_set_uint_param(codec, + ca0132_alt_vol_ctls[dsp_dir].mid, + ca0132_alt_vol_ctls[dsp_dir].reqs[0], + float_vol_db_lookup[lookup_val]); + + lookup_val = spec->vnode_rvol[nid - VNODE_START_NID]; + + dspio_set_uint_param(codec, + ca0132_alt_vol_ctls[dsp_dir].mid, + ca0132_alt_vol_ctls[dsp_dir].reqs[1], + float_vol_db_lookup[lookup_val]); + + dspio_set_uint_param(codec, + ca0132_alt_vol_ctls[dsp_dir].mid, + ca0132_alt_vol_ctls[dsp_dir].reqs[2], FLOAT_ZERO); +} + static int ca0132_volume_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -4734,6 +4843,51 @@ static int ca0132_volume_put(struct snd_kcontrol *kcontrol, return changed; } +/* + * This function is the same as the one above, because using an if statement + * inside of the above volume control for the DSP volume would cause too much + * lag. This is a lot more smooth. + */ +static int ca0132_alt_volume_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + struct ca0132_spec *spec = codec->spec; + hda_nid_t nid = get_amp_nid(kcontrol); + int ch = get_amp_channels(kcontrol); + long *valp = ucontrol->value.integer.value; + hda_nid_t vnid = 0; + int changed = 1; + + switch (nid) { + case 0x02: + vnid = VNID_SPK; + break; + case 0x07: + vnid = VNID_MIC; + break; + } + + /* store the left and right volume */ + if (ch & 1) { + spec->vnode_lvol[vnid - VNODE_START_NID] = *valp; + valp++; + } + if (ch & 2) { + spec->vnode_rvol[vnid - VNODE_START_NID] = *valp; + valp++; + } + + snd_hda_power_up(codec); + ca0132_alt_dsp_volume_put(codec, vnid); + mutex_lock(&codec->control_mutex); + changed = snd_hda_mixer_amp_volume_put(kcontrol, ucontrol); + mutex_unlock(&codec->control_mutex); + snd_hda_power_down(codec); + + return changed; +} + static int ca0132_volume_tlv(struct snd_kcontrol *kcontrol, int op_flag, unsigned int size, unsigned int __user *tlv) { @@ -4853,6 +5007,39 @@ static struct snd_kcontrol_new ca0132_mixer[] = { { } /* end */ }; +/* + * SBZ specific control mixer. Removes auto-detect for mic, and adds surround + * controls. Also sets both the Front Playback and Capture Volume controls to + * alt so they set the DSP's decibel level. + */ +static struct snd_kcontrol_new sbz_mixer[] = { + CA0132_ALT_CODEC_VOL("Front Playback Volume", 0x02, HDA_OUTPUT), + CA0132_CODEC_MUTE("Front Playback Switch", VNID_SPK, HDA_OUTPUT), + CA0132_ALT_CODEC_VOL("Capture Volume", 0x07, HDA_INPUT), + CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT), + HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT), + HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT), + CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch", + VNID_HP_ASEL, 1, HDA_OUTPUT), + { } /* end */ +}; + +/* + * Same as the Sound Blaster Z, except doesn't use the alt volume for capture + * because it doesn't set decibel levels for the DSP for capture. + */ +static struct snd_kcontrol_new r3di_mixer[] = { + CA0132_ALT_CODEC_VOL("Front Playback Volume", 0x02, HDA_OUTPUT), + CA0132_CODEC_MUTE("Front Playback Switch", VNID_SPK, HDA_OUTPUT), + CA0132_CODEC_VOL("Capture Volume", VNID_MIC, HDA_INPUT), + CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT), + HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT), + HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT), + CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch", + VNID_HP_ASEL, 1, HDA_OUTPUT), + { } /* end */ +}; + static int ca0132_build_controls(struct hda_codec *codec) { struct ca0132_spec *spec = codec->spec; @@ -6566,7 +6753,21 @@ static int patch_ca0132(struct hda_codec *codec) spec->dsp_state = DSP_DOWNLOAD_INIT; spec->num_mixers = 1; - spec->mixers[0] = ca0132_mixer; + + /* Set which mixers each quirk uses. */ + switch (spec->quirk) { + case QUIRK_SBZ: + spec->mixers[0] = sbz_mixer; + snd_hda_codec_set_name(codec, "Sound Blaster Z"); + break; + case QUIRK_R3DI: + spec->mixers[0] = r3di_mixer; + snd_hda_codec_set_name(codec, "Recon3Di"); + break; + default: + spec->mixers[0] = ca0132_mixer; + break; + } /* Setup whether or not to use alt functions */ switch (spec->quirk) { |