diff options
author | Connor McAdams <conmanx360@gmail.com> | 2018-05-08 13:20:07 -0400 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2018-05-13 09:29:29 +0200 |
commit | 38ba69ffcea397010a0887af28b495167dbf6f39 (patch) | |
tree | 0933a841a19df369260e30f6e7116ee764fc8be4 /sound/pci | |
parent | 009b8f979bf8cb5f7ec6d3dd7683585122ed10f8 (diff) | |
download | linux-stable-38ba69ffcea397010a0887af28b495167dbf6f39.tar.gz linux-stable-38ba69ffcea397010a0887af28b495167dbf6f39.tar.bz2 linux-stable-38ba69ffcea397010a0887af28b495167dbf6f39.zip |
ALSA: hda/ca0132: add dsp setup related commands for the sbz
Add dsp setup related functions for the Sound Blaster Z, along with
other helper functions.
Also, add sbz_dsp_startup_check, which fixes a bug where the card
sometimes starts up and has no sound.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci')
-rw-r--r-- | sound/pci/hda/patch_ca0132.c | 341 |
1 files changed, 335 insertions, 6 deletions
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 096eb3bbeb48..bd7b30a43d4f 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -49,6 +49,7 @@ #define FLOAT_ZERO 0x00000000 #define FLOAT_ONE 0x3f800000 #define FLOAT_TWO 0x40000000 +#define FLOAT_THREE 0x40400000 #define FLOAT_MINUS_5 0xc0a00000 #define UNSOL_TAG_DSP 0x16 @@ -748,6 +749,7 @@ struct ca0132_spec { unsigned int scp_resp_data[4]; unsigned int scp_resp_count; bool alt_firmware_present; + bool startup_check_entered; bool dsp_reload; /* mixer and effects related */ @@ -1028,6 +1030,29 @@ exit: } /* + * Write given value to the given address through the chip I/O widget. + * not protected by the Mutex + */ +static int chipio_write_no_mutex(struct hda_codec *codec, + unsigned int chip_addx, const unsigned int data) +{ + int err; + + + /* write the address, and if successful proceed to write data */ + err = chipio_write_address(codec, chip_addx); + if (err < 0) + goto exit; + + err = chipio_write_data(codec, data); + if (err < 0) + goto exit; + +exit: + return err; +} + +/* * Write multiple values to the given address through the chip I/O widget. * protected by the Mutex */ @@ -1143,6 +1168,32 @@ static void chipio_set_control_param_no_mutex(struct hda_codec *codec, } } } +/* + * Connect stream to a source point, and then connect + * that source point to a destination point. + */ +static void chipio_set_stream_source_dest(struct hda_codec *codec, + int streamid, int source_point, int dest_point) +{ + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_ID, streamid); + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_SOURCE_CONN_POINT, source_point); + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_DEST_CONN_POINT, dest_point); +} + +/* + * Set number of channels in the selected stream. + */ +static void chipio_set_stream_channels(struct hda_codec *codec, + int streamid, unsigned int channels) +{ + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_ID, streamid); + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAMS_CHANNELS, channels); +} /* * Enable/Disable audio stream. @@ -1156,6 +1207,19 @@ static void chipio_set_stream_control(struct hda_codec *codec, CONTROL_PARAM_STREAM_CONTROL, enable); } + +/* + * Set sampling rate of the connection point. NO MUTEX. + */ +static void chipio_set_conn_rate_no_mutex(struct hda_codec *codec, + int connid, enum ca0132_sample_rate rate) +{ + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_CONN_POINT_ID, connid); + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_CONN_POINT_SAMPLE_RATE, rate); +} + /* * Set sampling rate of the connection point. */ @@ -4479,6 +4543,123 @@ static void ca0132_refresh_widget_caps(struct hda_codec *codec) } /* + * Initialize Sound Blaster Z analog microphones. + */ +static void sbz_init_analog_mics(struct hda_codec *codec) +{ + unsigned int tmp; + + /* Mic 1 Setup */ + chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); + tmp = FLOAT_THREE; + dspio_set_uint_param(codec, 0x80, 0x00, tmp); + + /* Mic 2 Setup, even though it isn't connected on SBZ */ + chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, SR_96_000); + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x80, 0x01, tmp); + +} + +/* + * Sets the source of stream 0x14 to connpointID 0x48, and the destination + * connpointID to 0x91. If this isn't done, the destination is 0x71, and + * you get no sound. I'm guessing this has to do with the Sound Blaster Z + * having an updated DAC, which changes the destination to that DAC. + */ +static void sbz_connect_streams(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + mutex_lock(&spec->chipio_mutex); + + codec_dbg(codec, "Connect Streams entered, mutex locked and loaded.\n"); + + chipio_set_stream_channels(codec, 0x0C, 6); + chipio_set_stream_control(codec, 0x0C, 1); + + /* This value is 0x43 for 96khz, and 0x83 for 192khz. */ + chipio_write_no_mutex(codec, 0x18a020, 0x00000043); + + /* Setup stream 0x14 with it's source and destination points */ + chipio_set_stream_source_dest(codec, 0x14, 0x48, 0x91); + chipio_set_conn_rate_no_mutex(codec, 0x48, SR_96_000); + chipio_set_conn_rate_no_mutex(codec, 0x91, SR_96_000); + chipio_set_stream_channels(codec, 0x14, 2); + chipio_set_stream_control(codec, 0x14, 1); + + codec_dbg(codec, "Connect Streams exited, mutex released.\n"); + + mutex_unlock(&spec->chipio_mutex); + +} + +/* + * Write data through ChipIO to setup proper stream destinations. + * Not sure how it exactly works, but it seems to direct data + * to different destinations. Example is f8 to c0, e0 to c0. + * All I know is, if you don't set these, you get no sound. + */ +static void sbz_chipio_startup_data(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + mutex_lock(&spec->chipio_mutex); + codec_dbg(codec, "Startup Data entered, mutex locked and loaded.\n"); + + /* These control audio output */ + chipio_write_no_mutex(codec, 0x190060, 0x0001f8c0); + chipio_write_no_mutex(codec, 0x190064, 0x0001f9c1); + chipio_write_no_mutex(codec, 0x190068, 0x0001fac6); + chipio_write_no_mutex(codec, 0x19006c, 0x0001fbc7); + /* Signal to update I think */ + chipio_write_no_mutex(codec, 0x19042c, 0x00000001); + + chipio_set_stream_channels(codec, 0x0C, 6); + chipio_set_stream_control(codec, 0x0C, 1); + /* No clue what these control */ + chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0); + chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1); + chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2); + chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3); + chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4); + chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5); + chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6); + chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7); + chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8); + chipio_write_no_mutex(codec, 0x190054, 0x0001edc9); + chipio_write_no_mutex(codec, 0x190058, 0x0001eaca); + chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb); + + chipio_write_no_mutex(codec, 0x19042c, 0x00000001); + + codec_dbg(codec, "Startup Data exited, mutex released.\n"); + mutex_unlock(&spec->chipio_mutex); +} + +static void sbz_dsp_initial_mic_setup(struct hda_codec *codec) +{ + unsigned int tmp; + + chipio_set_stream_control(codec, 0x03, 0); + chipio_set_stream_control(codec, 0x04, 0); + + chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); + + tmp = FLOAT_THREE; + dspio_set_uint_param(codec, 0x80, 0x00, tmp); + + chipio_set_stream_control(codec, 0x03, 1); + chipio_set_stream_control(codec, 0x04, 1); + + chipio_write(codec, 0x18b098, 0x0000000c); + chipio_write(codec, 0x18b09C, 0x0000000c); +} + +/* * Setup default parameters for DSP */ static void ca0132_setup_defaults(struct hda_codec *codec) @@ -4523,6 +4704,83 @@ static void ca0132_setup_defaults(struct hda_codec *codec) } /* + * Setup default parameters for the Sound Blaster Z DSP. A lot more going on + * than the Chromebook setup. + */ +static void sbz_setup_defaults(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int tmp, stream_format; + int num_fx; + int idx, i; + + if (spec->dsp_state != DSP_DOWNLOADED) + return; + + + sbz_init_analog_mics(codec); + + sbz_connect_streams(codec); + + sbz_chipio_startup_data(codec); + + chipio_set_stream_control(codec, 0x03, 1); + chipio_set_stream_control(codec, 0x04, 1); + + /* + * Sets internal input loopback to off, used to have a switch to + * enable input loopback, but turned out to be way too buggy. + */ + tmp = FLOAT_ONE; + dspio_set_uint_param(codec, 0x37, 0x08, tmp); + dspio_set_uint_param(codec, 0x37, 0x10, tmp); + + /*remove DSP headroom*/ + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x96, 0x3C, tmp); + + /* set WUH source */ + tmp = FLOAT_TWO; + dspio_set_uint_param(codec, 0x31, 0x00, tmp); + chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); + + /* Set speaker source? */ + dspio_set_uint_param(codec, 0x32, 0x00, tmp); + + sbz_dsp_initial_mic_setup(codec); + + + /* out, in effects + voicefx */ + num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; + for (idx = 0; idx < num_fx; idx++) { + for (i = 0; i <= ca0132_effects[idx].params; i++) { + dspio_set_uint_param(codec, + ca0132_effects[idx].mid, + ca0132_effects[idx].reqs[i], + ca0132_effects[idx].def_vals[i]); + } + } + + /* + * Have to make a stream to bind the sound output to, otherwise + * you'll get dead audio. Before I did this, it would bind to an + * audio input, and would never work + */ + stream_format = snd_hdac_calc_stream_format(48000, 2, + SNDRV_PCM_FORMAT_S32_LE, 32, 0); + + snd_hda_codec_setup_stream(codec, spec->dacs[0], spec->dsp_stream_id, + 0, stream_format); + + snd_hda_codec_cleanup_stream(codec, spec->dacs[0]); + + snd_hda_codec_setup_stream(codec, spec->dacs[0], spec->dsp_stream_id, + 0, stream_format); + + snd_hda_codec_cleanup_stream(codec, spec->dacs[0]); +} + +/* * Initialization of flags in chip */ static void ca0132_init_flags(struct hda_codec *codec) @@ -4959,6 +5217,71 @@ static void ca0132_exit_chip(struct hda_codec *codec) } /* + * This fixes a problem that was hard to reproduce. Very rarely, I would + * boot up, and there would be no sound, but the DSP indicated it had loaded + * properly. I did a few memory dumps to see if anything was different, and + * there were a few areas of memory uninitialized with a1a2a3a4. This function + * checks if those areas are uninitialized, and if they are, it'll attempt to + * reload the card 3 times. Usually it fixes by the second. + */ +static void sbz_dsp_startup_check(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int dsp_data_check[4]; + unsigned int cur_address = 0x390; + unsigned int i; + unsigned int failure = 0; + unsigned int reload = 3; + + if (spec->startup_check_entered) + return; + + spec->startup_check_entered = true; + + for (i = 0; i < 4; i++) { + chipio_read(codec, cur_address, &dsp_data_check[i]); + cur_address += 0x4; + } + for (i = 0; i < 4; i++) { + if (dsp_data_check[i] == 0xa1a2a3a4) + failure = 1; + } + + codec_dbg(codec, "Startup Check: %d ", failure); + if (failure) + codec_info(codec, "DSP not initialized properly. Attempting to fix."); + /* + * While the failure condition is true, and we haven't reached our + * three reload limit, continue trying to reload the driver and + * fix the issue. + */ + while (failure && (reload != 0)) { + codec_info(codec, "Reloading... Tries left: %d", reload); + sbz_exit_chip(codec); + spec->dsp_state = DSP_DOWNLOAD_INIT; + codec->patch_ops.init(codec); + failure = 0; + for (i = 0; i < 4; i++) { + chipio_read(codec, cur_address, &dsp_data_check[i]); + cur_address += 0x4; + } + for (i = 0; i < 4; i++) { + if (dsp_data_check[i] == 0xa1a2a3a4) + failure = 1; + } + reload--; + } + + if (!failure && reload < 3) + codec_info(codec, "DSP fixed."); + + if (!failure) + return; + + codec_info(codec, "DSP failed to initialize properly. Either try a full shutdown or a suspend to clear the internal memory."); +} + +/* * This is for the extra volume verbs 0x797 (left) and 0x798 (right). These add * extra precision for decibel values. If you had the dB value in floating point * you would take the value after the decimal point, multiply by 64, and divide @@ -5107,8 +5430,11 @@ static int ca0132_init(struct hda_codec *codec) if (!dsp_loaded) { spec->dsp_reload = true; spec->dsp_state = DSP_DOWNLOAD_INIT; - } else + } else { + if (spec->quirk == QUIRK_SBZ) + sbz_dsp_startup_check(codec); return 0; + } } if (spec->dsp_state != DSP_DOWNLOAD_FAILED) @@ -5121,7 +5447,6 @@ static int ca0132_init(struct hda_codec *codec) snd_hda_power_up_pm(codec); ca0132_init_unsol(codec); - ca0132_init_params(codec); ca0132_init_flags(codec); snd_hda_sequence_write(codec, spec->base_init_verbs); @@ -5135,9 +5460,11 @@ static int ca0132_init(struct hda_codec *codec) if (spec->quirk == QUIRK_SBZ) writew(0x0107, spec->mem_base + 0x320); - ca0132_setup_defaults(codec); - ca0132_init_analog_mic2(codec); - ca0132_init_dmic(codec); + if (spec->quirk != QUIRK_SBZ) { + ca0132_setup_defaults(codec); + ca0132_init_analog_mic2(codec); + ca0132_init_dmic(codec); + } for (i = 0; i < spec->num_outputs; i++) init_output(codec, spec->out_pins[i], spec->dacs[0]); @@ -5157,8 +5484,10 @@ static int ca0132_init(struct hda_codec *codec) VENDOR_CHIPIO_PARAM_EX_VALUE_SET, 0x20); } - if (spec->quirk == QUIRK_SBZ) + if (spec->quirk == QUIRK_SBZ) { ca0132_gpio_setup(codec); + sbz_setup_defaults(codec); + } snd_hda_sequence_write(codec, spec->spec_init_verbs); |