diff options
author | Arnd Bergmann <arnd@arndb.de> | 2022-09-30 14:45:21 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2023-01-10 23:10:27 +0100 |
commit | 2b45e1fa9398f6dc8a242f59118d5e28fa00351f (patch) | |
tree | 0288ff295e8a38907af6842423179a020f883abe /sound | |
parent | ca2259c352519721a659239e187c1d3a375a8f96 (diff) | |
download | linux-stable-2b45e1fa9398f6dc8a242f59118d5e28fa00351f.tar.gz linux-stable-2b45e1fa9398f6dc8a242f59118d5e28fa00351f.tar.bz2 linux-stable-2b45e1fa9398f6dc8a242f59118d5e28fa00351f.zip |
ASoC: remove unused ep93xx files
A couple of ep93xx board files were unused and got removed, so
the corresponding ASoC support can also be removed.
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Cc: Ryan Mallon <rmallon@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'sound')
-rw-r--r-- | sound/soc/cirrus/Kconfig | 23 | ||||
-rw-r--r-- | sound/soc/cirrus/Makefile | 6 | ||||
-rw-r--r-- | sound/soc/cirrus/ep93xx-ac97.c | 446 | ||||
-rw-r--r-- | sound/soc/cirrus/simone.c | 86 | ||||
-rw-r--r-- | sound/soc/cirrus/snappercl15.c | 134 |
5 files changed, 0 insertions, 695 deletions
diff --git a/sound/soc/cirrus/Kconfig b/sound/soc/cirrus/Kconfig index 8039a8febefa..34870c2d0cba 100644 --- a/sound/soc/cirrus/Kconfig +++ b/sound/soc/cirrus/Kconfig @@ -27,29 +27,6 @@ config SND_EP93XX_SOC_I2S_WATCHDOG endif # if SND_EP93XX_SOC_I2S -config SND_EP93XX_SOC_AC97 - tristate - select AC97_BUS - select SND_SOC_AC97_BUS - -config SND_EP93XX_SOC_SNAPPERCL15 - tristate "SoC Audio support for Bluewater Systems Snapper CL15 module" - depends on SND_EP93XX_SOC && MACH_SNAPPER_CL15 && I2C - select SND_EP93XX_SOC_I2S - select SND_SOC_TLV320AIC23_I2C - help - Say Y or M here if you want to add support for I2S audio on the - Bluewater Systems Snapper CL15 module. - -config SND_EP93XX_SOC_SIMONE - tristate "SoC Audio support for Simplemachines Sim.One board" - depends on SND_EP93XX_SOC && MACH_SIM_ONE - select SND_EP93XX_SOC_AC97 - select SND_SOC_AC97_CODEC - help - Say Y or M here if you want to add support for AC97 audio on the - Simplemachines Sim.One board. - config SND_EP93XX_SOC_EDB93XX tristate "SoC Audio support for Cirrus Logic EDB93xx boards" depends on SND_EP93XX_SOC && (MACH_EDB9301 || MACH_EDB9302 || MACH_EDB9302A || MACH_EDB9307A || MACH_EDB9315A) diff --git a/sound/soc/cirrus/Makefile b/sound/soc/cirrus/Makefile index bfb8dc409f53..19a86daad660 100644 --- a/sound/soc/cirrus/Makefile +++ b/sound/soc/cirrus/Makefile @@ -2,17 +2,11 @@ # EP93xx Platform Support snd-soc-ep93xx-objs := ep93xx-pcm.o snd-soc-ep93xx-i2s-objs := ep93xx-i2s.o -snd-soc-ep93xx-ac97-objs := ep93xx-ac97.o obj-$(CONFIG_SND_EP93XX_SOC) += snd-soc-ep93xx.o obj-$(CONFIG_SND_EP93XX_SOC_I2S) += snd-soc-ep93xx-i2s.o -obj-$(CONFIG_SND_EP93XX_SOC_AC97) += snd-soc-ep93xx-ac97.o # EP93XX Machine Support -snd-soc-snappercl15-objs := snappercl15.o -snd-soc-simone-objs := simone.o snd-soc-edb93xx-objs := edb93xx.o -obj-$(CONFIG_SND_EP93XX_SOC_SNAPPERCL15) += snd-soc-snappercl15.o -obj-$(CONFIG_SND_EP93XX_SOC_SIMONE) += snd-soc-simone.o obj-$(CONFIG_SND_EP93XX_SOC_EDB93XX) += snd-soc-edb93xx.o diff --git a/sound/soc/cirrus/ep93xx-ac97.c b/sound/soc/cirrus/ep93xx-ac97.c deleted file mode 100644 index 37593abe6053..000000000000 --- a/sound/soc/cirrus/ep93xx-ac97.c +++ /dev/null @@ -1,446 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * ASoC driver for Cirrus Logic EP93xx AC97 controller. - * - * Copyright (c) 2010 Mika Westerberg - * - * Based on s3c-ac97 ASoC driver by Jaswinder Singh. - */ - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> - -#include <sound/core.h> -#include <sound/dmaengine_pcm.h> -#include <sound/ac97_codec.h> -#include <sound/soc.h> - -#include <linux/platform_data/dma-ep93xx.h> -#include <linux/soc/cirrus/ep93xx.h> - -#include "ep93xx-pcm.h" - -/* - * Per channel (1-4) registers. - */ -#define AC97CH(n) (((n) - 1) * 0x20) - -#define AC97DR(n) (AC97CH(n) + 0x0000) - -#define AC97RXCR(n) (AC97CH(n) + 0x0004) -#define AC97RXCR_REN BIT(0) -#define AC97RXCR_RX3 BIT(3) -#define AC97RXCR_RX4 BIT(4) -#define AC97RXCR_CM BIT(15) - -#define AC97TXCR(n) (AC97CH(n) + 0x0008) -#define AC97TXCR_TEN BIT(0) -#define AC97TXCR_TX3 BIT(3) -#define AC97TXCR_TX4 BIT(4) -#define AC97TXCR_CM BIT(15) - -#define AC97SR(n) (AC97CH(n) + 0x000c) -#define AC97SR_TXFE BIT(1) -#define AC97SR_TXUE BIT(6) - -#define AC97RISR(n) (AC97CH(n) + 0x0010) -#define AC97ISR(n) (AC97CH(n) + 0x0014) -#define AC97IE(n) (AC97CH(n) + 0x0018) - -/* - * Global AC97 controller registers. - */ -#define AC97S1DATA 0x0080 -#define AC97S2DATA 0x0084 -#define AC97S12DATA 0x0088 - -#define AC97RGIS 0x008c -#define AC97GIS 0x0090 -#define AC97IM 0x0094 -/* - * Common bits for RGIS, GIS and IM registers. - */ -#define AC97_SLOT2RXVALID BIT(1) -#define AC97_CODECREADY BIT(5) -#define AC97_SLOT2TXCOMPLETE BIT(6) - -#define AC97EOI 0x0098 -#define AC97EOI_WINT BIT(0) -#define AC97EOI_CODECREADY BIT(1) - -#define AC97GCR 0x009c -#define AC97GCR_AC97IFE BIT(0) - -#define AC97RESET 0x00a0 -#define AC97RESET_TIMEDRESET BIT(0) - -#define AC97SYNC 0x00a4 -#define AC97SYNC_TIMEDSYNC BIT(0) - -#define AC97_TIMEOUT msecs_to_jiffies(5) - -/** - * struct ep93xx_ac97_info - EP93xx AC97 controller info structure - * @lock: mutex serializing access to the bus (slot 1 & 2 ops) - * @dev: pointer to the platform device dev structure - * @regs: mapped AC97 controller registers - * @done: bus ops wait here for an interrupt - */ -struct ep93xx_ac97_info { - struct mutex lock; - struct device *dev; - void __iomem *regs; - struct completion done; - struct snd_dmaengine_dai_dma_data dma_params_rx; - struct snd_dmaengine_dai_dma_data dma_params_tx; -}; - -/* currently ALSA only supports a single AC97 device */ -static struct ep93xx_ac97_info *ep93xx_ac97_info; - -static struct ep93xx_dma_data ep93xx_ac97_pcm_out = { - .name = "ac97-pcm-out", - .port = EP93XX_DMA_AAC1, - .direction = DMA_MEM_TO_DEV, -}; - -static struct ep93xx_dma_data ep93xx_ac97_pcm_in = { - .name = "ac97-pcm-in", - .port = EP93XX_DMA_AAC1, - .direction = DMA_DEV_TO_MEM, -}; - -static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info, - unsigned reg) -{ - return __raw_readl(info->regs + reg); -} - -static inline void ep93xx_ac97_write_reg(struct ep93xx_ac97_info *info, - unsigned reg, unsigned val) -{ - __raw_writel(val, info->regs + reg); -} - -static unsigned short ep93xx_ac97_read(struct snd_ac97 *ac97, - unsigned short reg) -{ - struct ep93xx_ac97_info *info = ep93xx_ac97_info; - unsigned short val; - - mutex_lock(&info->lock); - - ep93xx_ac97_write_reg(info, AC97S1DATA, reg); - ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2RXVALID); - if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) { - dev_warn(info->dev, "timeout reading register %x\n", reg); - mutex_unlock(&info->lock); - return -ETIMEDOUT; - } - val = (unsigned short)ep93xx_ac97_read_reg(info, AC97S2DATA); - - mutex_unlock(&info->lock); - return val; -} - -static void ep93xx_ac97_write(struct snd_ac97 *ac97, - unsigned short reg, - unsigned short val) -{ - struct ep93xx_ac97_info *info = ep93xx_ac97_info; - - mutex_lock(&info->lock); - - /* - * Writes to the codec need to be done so that slot 2 is filled in - * before slot 1. - */ - ep93xx_ac97_write_reg(info, AC97S2DATA, val); - ep93xx_ac97_write_reg(info, AC97S1DATA, reg); - - ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2TXCOMPLETE); - if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) - dev_warn(info->dev, "timeout writing register %x\n", reg); - - mutex_unlock(&info->lock); -} - -static void ep93xx_ac97_warm_reset(struct snd_ac97 *ac97) -{ - struct ep93xx_ac97_info *info = ep93xx_ac97_info; - - mutex_lock(&info->lock); - - /* - * We are assuming that before this functions gets called, the codec - * BIT_CLK is stopped by forcing the codec into powerdown mode. We can - * control the SYNC signal directly via AC97SYNC register. Using - * TIMEDSYNC the controller will keep the SYNC high > 1us. - */ - ep93xx_ac97_write_reg(info, AC97SYNC, AC97SYNC_TIMEDSYNC); - ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY); - if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) - dev_warn(info->dev, "codec warm reset timeout\n"); - - mutex_unlock(&info->lock); -} - -static void ep93xx_ac97_cold_reset(struct snd_ac97 *ac97) -{ - struct ep93xx_ac97_info *info = ep93xx_ac97_info; - - mutex_lock(&info->lock); - - /* - * For doing cold reset, we disable the AC97 controller interface, clear - * WINT and CODECREADY bits, and finally enable the interface again. - */ - ep93xx_ac97_write_reg(info, AC97GCR, 0); - ep93xx_ac97_write_reg(info, AC97EOI, AC97EOI_CODECREADY | AC97EOI_WINT); - ep93xx_ac97_write_reg(info, AC97GCR, AC97GCR_AC97IFE); - - /* - * Now, assert the reset and wait for the codec to become ready. - */ - ep93xx_ac97_write_reg(info, AC97RESET, AC97RESET_TIMEDRESET); - ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY); - if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) - dev_warn(info->dev, "codec cold reset timeout\n"); - - /* - * Give the codec some time to come fully out from the reset. This way - * we ensure that the subsequent reads/writes will work. - */ - usleep_range(15000, 20000); - - mutex_unlock(&info->lock); -} - -static irqreturn_t ep93xx_ac97_interrupt(int irq, void *dev_id) -{ - struct ep93xx_ac97_info *info = dev_id; - unsigned status, mask; - - /* - * Just mask out the interrupt and wake up the waiting thread. - * Interrupts are cleared via reading/writing to slot 1 & 2 registers by - * the waiting thread. - */ - status = ep93xx_ac97_read_reg(info, AC97GIS); - mask = ep93xx_ac97_read_reg(info, AC97IM); - mask &= ~status; - ep93xx_ac97_write_reg(info, AC97IM, mask); - - complete(&info->done); - return IRQ_HANDLED; -} - -static struct snd_ac97_bus_ops ep93xx_ac97_ops = { - .read = ep93xx_ac97_read, - .write = ep93xx_ac97_write, - .reset = ep93xx_ac97_cold_reset, - .warm_reset = ep93xx_ac97_warm_reset, -}; - -static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream, - int cmd, struct snd_soc_dai *dai) -{ - struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai); - unsigned v = 0; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - /* - * Enable compact mode, TX slots 3 & 4, and the TX FIFO - * itself. - */ - v |= AC97TXCR_CM; - v |= AC97TXCR_TX3 | AC97TXCR_TX4; - v |= AC97TXCR_TEN; - ep93xx_ac97_write_reg(info, AC97TXCR(1), v); - } else { - /* - * Enable compact mode, RX slots 3 & 4, and the RX FIFO - * itself. - */ - v |= AC97RXCR_CM; - v |= AC97RXCR_RX3 | AC97RXCR_RX4; - v |= AC97RXCR_REN; - ep93xx_ac97_write_reg(info, AC97RXCR(1), v); - } - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - /* - * As per Cirrus EP93xx errata described below: - * - * https://www.cirrus.com/en/pubs/errata/ER667E2B.pdf - * - * we will wait for the TX FIFO to be empty before - * clearing the TEN bit. - */ - unsigned long timeout = jiffies + AC97_TIMEOUT; - - do { - v = ep93xx_ac97_read_reg(info, AC97SR(1)); - if (time_after(jiffies, timeout)) { - dev_warn(info->dev, "TX timeout\n"); - break; - } - } while (!(v & (AC97SR_TXFE | AC97SR_TXUE))); - - /* disable the TX FIFO */ - ep93xx_ac97_write_reg(info, AC97TXCR(1), 0); - } else { - /* disable the RX FIFO */ - ep93xx_ac97_write_reg(info, AC97RXCR(1), 0); - } - break; - - default: - dev_warn(info->dev, "unknown command %d\n", cmd); - return -EINVAL; - } - - return 0; -} - -static int ep93xx_ac97_dai_probe(struct snd_soc_dai *dai) -{ - struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai); - - info->dma_params_tx.filter_data = &ep93xx_ac97_pcm_out; - info->dma_params_rx.filter_data = &ep93xx_ac97_pcm_in; - - dai->playback_dma_data = &info->dma_params_tx; - dai->capture_dma_data = &info->dma_params_rx; - - return 0; -} - -static const struct snd_soc_dai_ops ep93xx_ac97_dai_ops = { - .trigger = ep93xx_ac97_trigger, -}; - -static struct snd_soc_dai_driver ep93xx_ac97_dai = { - .name = "ep93xx-ac97", - .id = 0, - .probe = ep93xx_ac97_dai_probe, - .playback = { - .stream_name = "AC97 Playback", - .channels_min = 2, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_48000, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - }, - .capture = { - .stream_name = "AC97 Capture", - .channels_min = 2, - .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_48000, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - }, - .ops = &ep93xx_ac97_dai_ops, -}; - -static const struct snd_soc_component_driver ep93xx_ac97_component = { - .name = "ep93xx-ac97", - .legacy_dai_naming = 1, -}; - -static int ep93xx_ac97_probe(struct platform_device *pdev) -{ - struct ep93xx_ac97_info *info; - int irq; - int ret; - - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->regs = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(info->regs)) - return PTR_ERR(info->regs); - - irq = platform_get_irq(pdev, 0); - if (irq <= 0) - return irq < 0 ? irq : -ENODEV; - - ret = devm_request_irq(&pdev->dev, irq, ep93xx_ac97_interrupt, - IRQF_TRIGGER_HIGH, pdev->name, info); - if (ret) - goto fail; - - dev_set_drvdata(&pdev->dev, info); - - mutex_init(&info->lock); - init_completion(&info->done); - info->dev = &pdev->dev; - - ep93xx_ac97_info = info; - platform_set_drvdata(pdev, info); - - ret = snd_soc_set_ac97_ops(&ep93xx_ac97_ops); - if (ret) - goto fail; - - ret = snd_soc_register_component(&pdev->dev, &ep93xx_ac97_component, - &ep93xx_ac97_dai, 1); - if (ret) - goto fail; - - ret = devm_ep93xx_pcm_platform_register(&pdev->dev); - if (ret) - goto fail_unregister; - - return 0; - -fail_unregister: - snd_soc_unregister_component(&pdev->dev); -fail: - ep93xx_ac97_info = NULL; - snd_soc_set_ac97_ops(NULL); - return ret; -} - -static int ep93xx_ac97_remove(struct platform_device *pdev) -{ - struct ep93xx_ac97_info *info = platform_get_drvdata(pdev); - - snd_soc_unregister_component(&pdev->dev); - - /* disable the AC97 controller */ - ep93xx_ac97_write_reg(info, AC97GCR, 0); - - ep93xx_ac97_info = NULL; - - snd_soc_set_ac97_ops(NULL); - - return 0; -} - -static struct platform_driver ep93xx_ac97_driver = { - .probe = ep93xx_ac97_probe, - .remove = ep93xx_ac97_remove, - .driver = { - .name = "ep93xx-ac97", - }, -}; - -module_platform_driver(ep93xx_ac97_driver); - -MODULE_DESCRIPTION("EP93xx AC97 ASoC Driver"); -MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:ep93xx-ac97"); diff --git a/sound/soc/cirrus/simone.c b/sound/soc/cirrus/simone.c deleted file mode 100644 index 801c90877d77..000000000000 --- a/sound/soc/cirrus/simone.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * simone.c -- ASoC audio for Simplemachines Sim.One board - * - * Copyright (c) 2010 Mika Westerberg - * - * Based on snappercl15 machine driver by Ryan Mallon. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/soc/cirrus/ep93xx.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> - -SND_SOC_DAILINK_DEFS(hifi, - DAILINK_COMP_ARRAY(COMP_CPU("ep93xx-ac97")), - DAILINK_COMP_ARRAY(COMP_CODEC("ac97-codec", "ac97-hifi")), - DAILINK_COMP_ARRAY(COMP_PLATFORM("ep93xx-ac97"))); - -static struct snd_soc_dai_link simone_dai = { - .name = "AC97", - .stream_name = "AC97 HiFi", - SND_SOC_DAILINK_REG(hifi), -}; - -static struct snd_soc_card snd_soc_simone = { - .name = "Sim.One", - .owner = THIS_MODULE, - .dai_link = &simone_dai, - .num_links = 1, -}; - -static struct platform_device *simone_snd_ac97_device; - -static int simone_probe(struct platform_device *pdev) -{ - struct snd_soc_card *card = &snd_soc_simone; - int ret; - - simone_snd_ac97_device = platform_device_register_simple("ac97-codec", - -1, NULL, 0); - if (IS_ERR(simone_snd_ac97_device)) - return PTR_ERR(simone_snd_ac97_device); - - card->dev = &pdev->dev; - - ret = snd_soc_register_card(card); - if (ret) { - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", - ret); - platform_device_unregister(simone_snd_ac97_device); - } - - return ret; -} - -static int simone_remove(struct platform_device *pdev) -{ - struct snd_soc_card *card = platform_get_drvdata(pdev); - - snd_soc_unregister_card(card); - platform_device_unregister(simone_snd_ac97_device); - - return 0; -} - -static struct platform_driver simone_driver = { - .driver = { - .name = "simone-audio", - }, - .probe = simone_probe, - .remove = simone_remove, -}; - -module_platform_driver(simone_driver); - -MODULE_DESCRIPTION("ALSA SoC Simplemachines Sim.One"); -MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:simone-audio"); diff --git a/sound/soc/cirrus/snappercl15.c b/sound/soc/cirrus/snappercl15.c deleted file mode 100644 index a286f5beeaeb..000000000000 --- a/sound/soc/cirrus/snappercl15.c +++ /dev/null @@ -1,134 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * snappercl15.c -- SoC audio for Bluewater Systems Snapper CL15 module - * - * Copyright (C) 2008 Bluewater Systems Ltd - * Author: Ryan Mallon - */ - -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/soc/cirrus/ep93xx.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> - -#include "../codecs/tlv320aic23.h" - -#define CODEC_CLOCK 5644800 - -static int snappercl15_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); - struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); - int err; - - err = snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, - SND_SOC_CLOCK_IN); - if (err) - return err; - - err = snd_soc_dai_set_sysclk(cpu_dai, 0, CODEC_CLOCK, - SND_SOC_CLOCK_OUT); - if (err) - return err; - - return 0; -} - -static const struct snd_soc_ops snappercl15_ops = { - .hw_params = snappercl15_hw_params, -}; - -static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = { - SND_SOC_DAPM_HP("Headphone Jack", NULL), - SND_SOC_DAPM_LINE("Line In", NULL), - SND_SOC_DAPM_MIC("Mic Jack", NULL), -}; - -static const struct snd_soc_dapm_route audio_map[] = { - {"Headphone Jack", NULL, "LHPOUT"}, - {"Headphone Jack", NULL, "RHPOUT"}, - - {"LLINEIN", NULL, "Line In"}, - {"RLINEIN", NULL, "Line In"}, - - {"MICIN", NULL, "Mic Jack"}, -}; - -SND_SOC_DAILINK_DEFS(aic23, - DAILINK_COMP_ARRAY(COMP_CPU("ep93xx-i2s")), - DAILINK_COMP_ARRAY(COMP_CODEC("tlv320aic23-codec.0-001a", - "tlv320aic23-hifi")), - DAILINK_COMP_ARRAY(COMP_PLATFORM("ep93xx-i2s"))); - -static struct snd_soc_dai_link snappercl15_dai = { - .name = "tlv320aic23", - .stream_name = "AIC23", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBC_CFC, - .ops = &snappercl15_ops, - SND_SOC_DAILINK_REG(aic23), -}; - -static struct snd_soc_card snd_soc_snappercl15 = { - .name = "Snapper CL15", - .owner = THIS_MODULE, - .dai_link = &snappercl15_dai, - .num_links = 1, - - .dapm_widgets = tlv320aic23_dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(tlv320aic23_dapm_widgets), - .dapm_routes = audio_map, - .num_dapm_routes = ARRAY_SIZE(audio_map), -}; - -static int snappercl15_probe(struct platform_device *pdev) -{ - struct snd_soc_card *card = &snd_soc_snappercl15; - int ret; - - ret = ep93xx_i2s_acquire(); - if (ret) - return ret; - - card->dev = &pdev->dev; - - ret = snd_soc_register_card(card); - if (ret) { - dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", - ret); - ep93xx_i2s_release(); - } - - return ret; -} - -static int snappercl15_remove(struct platform_device *pdev) -{ - struct snd_soc_card *card = platform_get_drvdata(pdev); - - snd_soc_unregister_card(card); - ep93xx_i2s_release(); - - return 0; -} - -static struct platform_driver snappercl15_driver = { - .driver = { - .name = "snappercl15-audio", - }, - .probe = snappercl15_probe, - .remove = snappercl15_remove, -}; - -module_platform_driver(snappercl15_driver); - -MODULE_AUTHOR("Ryan Mallon"); -MODULE_DESCRIPTION("ALSA SoC Snapper CL15"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:snappercl15-audio"); |