diff options
-rw-r--r-- | drivers/iio/adc/Kconfig | 10 | ||||
-rw-r--r-- | drivers/iio/adc/Makefile | 1 | ||||
-rw-r--r-- | drivers/iio/adc/sun20i-gpadc-iio.c | 276 |
3 files changed, 287 insertions, 0 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 5f1e9bb59623..517b3db114b8 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -1134,6 +1134,16 @@ config SUN4I_GPADC To compile this driver as a module, choose M here: the module will be called sun4i-gpadc-iio. +config SUN20I_GPADC + tristate "Allwinner D1/T113s/T507/R329 and similar GPADCs driver" + depends on ARCH_SUNXI || COMPILE_TEST + help + Say yes here to build support for Allwinner (D1, T113, T507 and R329) + SoCs GPADC. This ADC provides up to 16 channels. + + To compile this driver as a module, choose M here: the module will be + called sun20i-gpadc-iio. + config TI_ADC081C tristate "Texas Instruments ADC081C/ADC101C/ADC121C family" depends on I2C diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index eb6e891790fb..2facf979327d 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -96,6 +96,7 @@ obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o obj-$(CONFIG_SPEAR_ADC) += spear_adc.o obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o +obj-$(CONFIG_SUN20I_GPADC) += sun20i-gpadc-iio.o obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o obj-$(CONFIG_STM32_ADC) += stm32-adc.o obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o diff --git a/drivers/iio/adc/sun20i-gpadc-iio.c b/drivers/iio/adc/sun20i-gpadc-iio.c new file mode 100644 index 000000000000..6a893d484cf7 --- /dev/null +++ b/drivers/iio/adc/sun20i-gpadc-iio.c @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * GPADC driver for sunxi platforms (D1, T113-S3 and R329) + * Copyright (c) 2023 Maksim Kiselev <bigunclemax@gmail.com> + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/reset.h> + +#include <linux/iio/iio.h> + +#define SUN20I_GPADC_DRIVER_NAME "sun20i-gpadc" + +/* Register map definition */ +#define SUN20I_GPADC_SR 0x00 +#define SUN20I_GPADC_CTRL 0x04 +#define SUN20I_GPADC_CS_EN 0x08 +#define SUN20I_GPADC_FIFO_INTC 0x0c +#define SUN20I_GPADC_FIFO_INTS 0x10 +#define SUN20I_GPADC_FIFO_DATA 0X14 +#define SUN20I_GPADC_CB_DATA 0X18 +#define SUN20I_GPADC_DATAL_INTC 0x20 +#define SUN20I_GPADC_DATAH_INTC 0x24 +#define SUN20I_GPADC_DATA_INTC 0x28 +#define SUN20I_GPADC_DATAL_INTS 0x30 +#define SUN20I_GPADC_DATAH_INTS 0x34 +#define SUN20I_GPADC_DATA_INTS 0x38 +#define SUN20I_GPADC_CH_CMP_DATA(x) (0x40 + (x) * 4) +#define SUN20I_GPADC_CH_DATA(x) (0x80 + (x) * 4) + +#define SUN20I_GPADC_CTRL_ADC_AUTOCALI_EN_MASK BIT(23) +#define SUN20I_GPADC_CTRL_WORK_MODE_MASK GENMASK(19, 18) +#define SUN20I_GPADC_CTRL_ADC_EN_MASK BIT(16) +#define SUN20I_GPADC_CS_EN_ADC_CH(x) BIT(x) +#define SUN20I_GPADC_DATA_INTC_CH_DATA_IRQ_EN(x) BIT(x) + +#define SUN20I_GPADC_WORK_MODE_SINGLE 0 + +struct sun20i_gpadc_iio { + void __iomem *regs; + struct completion completion; + int last_channel; + /* + * Lock to protect the device state during a potential concurrent + * read access from userspace. Reading a raw value requires a sequence + * of register writes, then a wait for a completion callback, + * and finally a register read, during which userspace could issue + * another read request. This lock protects a read access from + * ocurring before another one has finished. + */ + struct mutex lock; +}; + +static int sun20i_gpadc_adc_read(struct sun20i_gpadc_iio *info, + struct iio_chan_spec const *chan, int *val) +{ + u32 ctrl; + int ret = IIO_VAL_INT; + + mutex_lock(&info->lock); + + reinit_completion(&info->completion); + + if (info->last_channel != chan->channel) { + info->last_channel = chan->channel; + + /* enable the analog input channel */ + writel(SUN20I_GPADC_CS_EN_ADC_CH(chan->channel), + info->regs + SUN20I_GPADC_CS_EN); + + /* enable the data irq for input channel */ + writel(SUN20I_GPADC_DATA_INTC_CH_DATA_IRQ_EN(chan->channel), + info->regs + SUN20I_GPADC_DATA_INTC); + } + + /* enable the ADC function */ + ctrl = readl(info->regs + SUN20I_GPADC_CTRL); + ctrl |= FIELD_PREP(SUN20I_GPADC_CTRL_ADC_EN_MASK, 1); + writel(ctrl, info->regs + SUN20I_GPADC_CTRL); + + /* + * According to the datasheet maximum acquire time(TACQ) can be + * (65535+1)/24Mhz and conversion time(CONV_TIME) is always constant + * and equal to 14/24Mhz, so (TACQ+CONV_TIME) <= 2.73125ms. + * A 10ms delay should be enough to make sure an interrupt occurs in + * normal conditions. If it doesn't occur, then there is a timeout. + */ + if (!wait_for_completion_timeout(&info->completion, msecs_to_jiffies(10))) { + ret = -ETIMEDOUT; + goto err_unlock; + } + + /* read the ADC data */ + *val = readl(info->regs + SUN20I_GPADC_CH_DATA(chan->channel)); + +err_unlock: + mutex_unlock(&info->lock); + + return ret; +} + +static int sun20i_gpadc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct sun20i_gpadc_iio *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + return sun20i_gpadc_adc_read(info, chan, val); + case IIO_CHAN_INFO_SCALE: + /* value in mv = 1800mV / 4096 raw */ + *val = 1800; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static irqreturn_t sun20i_gpadc_irq_handler(int irq, void *data) +{ + struct sun20i_gpadc_iio *info = data; + + /* clear data interrupt status register */ + writel(GENMASK(31, 0), info->regs + SUN20I_GPADC_DATA_INTS); + + complete(&info->completion); + + return IRQ_HANDLED; +} + +static const struct iio_info sun20i_gpadc_iio_info = { + .read_raw = sun20i_gpadc_read_raw, +}; + +static void sun20i_gpadc_reset_assert(void *data) +{ + struct reset_control *rst = data; + + reset_control_assert(rst); +} + +static int sun20i_gpadc_alloc_channels(struct iio_dev *indio_dev, + struct device *dev) +{ + unsigned int channel; + int num_channels, i, ret; + struct iio_chan_spec *channels; + struct fwnode_handle *node; + + num_channels = device_get_child_node_count(dev); + if (num_channels == 0) + return dev_err_probe(dev, -ENODEV, "no channel children\n"); + + channels = devm_kcalloc(dev, num_channels, sizeof(*channels), + GFP_KERNEL); + if (!channels) + return -ENOMEM; + + i = 0; + device_for_each_child_node(dev, node) { + ret = fwnode_property_read_u32(node, "reg", &channel); + if (ret) { + fwnode_handle_put(node); + return dev_err_probe(dev, ret, "invalid channel number\n"); + } + + channels[i].type = IIO_VOLTAGE; + channels[i].indexed = 1; + channels[i].channel = channel; + channels[i].info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + channels[i].info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); + + i++; + } + + indio_dev->channels = channels; + indio_dev->num_channels = num_channels; + + return 0; +} + +static int sun20i_gpadc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *indio_dev; + struct sun20i_gpadc_iio *info; + struct reset_control *rst; + struct clk *clk; + int irq; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*info)); + if (!indio_dev) + return -ENOMEM; + + info = iio_priv(indio_dev); + info->last_channel = -1; + + mutex_init(&info->lock); + init_completion(&info->completion); + + ret = sun20i_gpadc_alloc_channels(indio_dev, dev); + if (ret) + return ret; + + indio_dev->info = &sun20i_gpadc_iio_info; + indio_dev->name = SUN20I_GPADC_DRIVER_NAME; + + info->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(info->regs)) + return PTR_ERR(info->regs); + + clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), "failed to enable bus clock\n"); + + rst = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(rst)) + return dev_err_probe(dev, PTR_ERR(rst), "failed to get reset control\n"); + + ret = reset_control_deassert(rst); + if (ret) + return dev_err_probe(dev, ret, "failed to deassert reset\n"); + + ret = devm_add_action_or_reset(dev, sun20i_gpadc_reset_assert, rst); + if (ret) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = devm_request_irq(dev, irq, sun20i_gpadc_irq_handler, 0, + dev_name(dev), info); + if (ret) + return dev_err_probe(dev, ret, "failed requesting irq %d\n", irq); + + writel(FIELD_PREP(SUN20I_GPADC_CTRL_ADC_AUTOCALI_EN_MASK, 1) | + FIELD_PREP(SUN20I_GPADC_CTRL_WORK_MODE_MASK, SUN20I_GPADC_WORK_MODE_SINGLE), + info->regs + SUN20I_GPADC_CTRL); + + ret = devm_iio_device_register(dev, indio_dev); + if (ret) + return dev_err_probe(dev, ret, "could not register the device\n"); + + return 0; +} + +static const struct of_device_id sun20i_gpadc_of_id[] = { + { .compatible = "allwinner,sun20i-d1-gpadc" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sun20i_gpadc_of_id); + +static struct platform_driver sun20i_gpadc_driver = { + .driver = { + .name = SUN20I_GPADC_DRIVER_NAME, + .of_match_table = sun20i_gpadc_of_id, + }, + .probe = sun20i_gpadc_probe, +}; +module_platform_driver(sun20i_gpadc_driver); + +MODULE_DESCRIPTION("ADC driver for sunxi platforms"); +MODULE_AUTHOR("Maksim Kiselev <bigunclemax@gmail.com>"); +MODULE_LICENSE("GPL"); |