diff options
| -rw-r--r-- | drivers/leds/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/leds/Makefile | 1 | ||||
| -rw-r--r-- | drivers/leds/leds-bd2802.c | 765 | ||||
| -rw-r--r-- | include/linux/leds-bd2802.h | 26 |
4 files changed, 799 insertions, 0 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index db84d8f616dc..b77baecd50ca 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -210,6 +210,13 @@ config LEDS_PWM help This option enables support for pwm driven LEDs +config LEDS_BD2802 + tristate "LED driver for BD2802 RGB LED" + depends on LEDS_CLASS && I2C + help + This option enables support for BD2802GU RGB LED driver chips + accessed via the I2C bus. + comment "LED Triggers" config LEDS_TRIGGERS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 291aea22bf0c..2d41c4dcf92f 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o # LED Platform Drivers obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o +obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c new file mode 100644 index 000000000000..4149ecb3a9b2 --- /dev/null +++ b/drivers/leds/leds-bd2802.c @@ -0,0 +1,765 @@ +/* + * leds-bd2802.c - RGB LED Driver + * + * Copyright (C) 2009 Samsung Electronics + * Kim Kyuwon <q1.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf + * + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/leds.h> +#include <linux/leds-bd2802.h> + + +#define LED_CTL(rgb2en, rgb1en) ((rgb2en) << 4 | ((rgb1en) << 0)) + +#define BD2802_LED_OFFSET 0xa +#define BD2802_COLOR_OFFSET 0x3 + +#define BD2802_REG_CLKSETUP 0x00 +#define BD2802_REG_CONTROL 0x01 +#define BD2802_REG_HOURSETUP 0x02 +#define BD2802_REG_CURRENT1SETUP 0x03 +#define BD2802_REG_CURRENT2SETUP 0x04 +#define BD2802_REG_WAVEPATTERN 0x05 + +#define BD2802_CURRENT_032 0x10 /* 3.2mA */ +#define BD2802_CURRENT_000 0x00 /* 0.0mA */ + +#define BD2802_PATTERN_FULL 0x07 +#define BD2802_PATTERN_HALF 0x03 + +enum led_ids { + LED1, + LED2, + LED_NUM, +}; + +enum led_colors { + RED, + GREEN, + BLUE, +}; + +enum led_bits { + BD2802_OFF, + BD2802_BLINK, + BD2802_ON, +}; + +/* + * State '0' : 'off' + * State '1' : 'blink' + * State '2' : 'on'. + */ +struct led_state { + unsigned r:2; + unsigned g:2; + unsigned b:2; +}; + +struct bd2802_led { + struct bd2802_led_platform_data *pdata; + struct i2c_client *client; + struct rw_semaphore rwsem; + struct work_struct work; + + struct led_state led[2]; + + /* + * Making led_classdev as array is not recommended, because array + * members prevent using 'container_of' macro. So repetitive works + * are needed. + */ + struct led_classdev cdev_led1r; + struct led_classdev cdev_led1g; + struct led_classdev cdev_led1b; + struct led_classdev cdev_led2r; + struct led_classdev cdev_led2g; + struct led_classdev cdev_led2b; + + /* + * Advanced Configuration Function(ADF) mode: + * In ADF mode, user can set registers of BD2802GU directly, + * therefore BD2802GU doesn't enter reset state. + */ + int adf_on; + + enum led_ids led_id; + enum led_colors color; + enum led_bits state; +}; + + +/*--------------------------------------------------------------*/ +/* BD2802GU helper functions */ +/*--------------------------------------------------------------*/ + +static inline int bd2802_is_rgb_off(struct bd2802_led *led, enum led_ids id, + enum led_colors color) +{ + switch (color) { + case RED: + return !led->led[id].r; + case GREEN: + return !led->led[id].g; + case BLUE: + return !led->led[id].b; + default: + dev_err(&led->client->dev, "%s: Invalid color\n", __func__); + return -EINVAL; + } +} + +static inline int bd2802_is_led_off(struct bd2802_led *led, enum led_ids id) +{ + if (led->led[id].r || led->led[id].g || led->led[id].b) + return 0; + + return 1; +} + +static inline int bd2802_is_all_off(struct bd2802_led *led) +{ + int i; + + for (i = 0; i < LED_NUM; i++) + if (!bd2802_is_led_off(led, i)) + return 0; + + return 1; +} + +static inline u8 bd2802_get_base_offset(enum led_ids id, enum led_colors color) +{ + return id * BD2802_LED_OFFSET + color * BD2802_COLOR_OFFSET; +} + +static inline u8 bd2802_get_reg_addr(enum led_ids id, enum led_colors color, + u8 reg_offset) +{ + return reg_offset + bd2802_get_base_offset(id, color); +} + + +/*--------------------------------------------------------------*/ +/* BD2802GU core functions */ +/*--------------------------------------------------------------*/ + +static int bd2802_write_byte(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + if (ret >= 0) + return 0; + + dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", + __func__, reg, val, ret); + + return ret; +} + +static void bd2802_update_state(struct bd2802_led *led, enum led_ids id, + enum led_colors color, enum led_bits led_bit) +{ + int i; + u8 value; + + for (i = 0; i < LED_NUM; i++) { + if (i == id) { + switch (color) { + case RED: + led->led[i].r = led_bit; + break; + case GREEN: + led->led[i].g = led_bit; + break; + case BLUE: + led->led[i].b = led_bit; + break; + default: + dev_err(&led->client->dev, + "%s: Invalid color\n", __func__); + return; + } + } + } + + if (led_bit == BD2802_BLINK || led_bit == BD2802_ON) + return; + + if (!bd2802_is_led_off(led, id)) + return; + + if (bd2802_is_all_off(led) && !led->adf_on) { + gpio_set_value(led->pdata->reset_gpio, 0); + return; + } + + /* + * In this case, other led is turned on, and current led is turned + * off. So set RGB LED Control register to stop the current RGB LED + */ + value = (id == LED1) ? LED_CTL(1, 0) : LED_CTL(0, 1); + bd2802_write_byte(led->client, BD2802_REG_CONTROL, value); +} + +static void bd2802_configure(struct bd2802_led *led) +{ + struct bd2802_led_platform_data *pdata = led->pdata; + u8 reg; + + reg = bd2802_get_reg_addr(LED1, RED, BD2802_REG_HOURSETUP); + bd2802_write_byte(led->client, reg, pdata->rgb_time); + + reg = bd2802_get_reg_addr(LED2, RED, BD2802_REG_HOURSETUP); + bd2802_write_byte(led->client, reg, pdata->rgb_time); +} + +static void bd2802_reset_cancel(struct bd2802_led *led) +{ + gpio_set_value(led->pdata->reset_gpio, 1); + udelay(100); + bd2802_configure(led); +} + +static void bd2802_enable(struct bd2802_led *led, enum led_ids id) +{ + enum led_ids other_led = (id == LED1) ? LED2 : LED1; + u8 value, other_led_on; + + other_led_on = !bd2802_is_led_off(led, other_led); + if (id == LED1) + value = LED_CTL(other_led_on, 1); + else + value = LED_CTL(1 , other_led_on); + + bd2802_write_byte(led->client, BD2802_REG_CONTROL, value); +} + +static void bd2802_set_on(struct bd2802_led *led, enum led_ids id, + enum led_colors color) +{ + u8 reg; + + if (bd2802_is_all_off(led) && !led->adf_on) + bd2802_reset_cancel(led); + + reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); + bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); + bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); + reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); + bd2802_write_byte(led->client, reg, BD2802_PATTERN_FULL); + + bd2802_enable(led, id); + bd2802_update_state(led, id, color, BD2802_ON); +} + +static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id, + enum led_colors color) +{ + u8 reg; + + if (bd2802_is_all_off(led) && !led->adf_on) + bd2802_reset_cancel(led); + + reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); + bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); + reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); + bd2802_write_byte(led->client, reg, BD2802_CURRENT_032); + reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN); + bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF); + + bd2802_enable(led, id); + bd2802_update_state(led, id, color, BD2802_BLINK); +} + +static void bd2802_turn_on(struct bd2802_led *led, enum led_ids id, + enum led_colors color, enum led_bits led_bit) +{ + if (led_bit == BD2802_OFF) { + dev_err(&led->client->dev, + "Only 'blink' and 'on' are allowed\n"); + return; + } + + if (led_bit == BD2802_BLINK) + bd2802_set_blink(led, id, color); + else + bd2802_set_on(led, id, color); +} + +static void bd2802_turn_off(struct bd2802_led *led, enum led_ids id, + enum led_colors color) +{ + u8 reg; + + if (bd2802_is_rgb_off(led, id, color)) + return; + + reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP); + bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); + reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP); + bd2802_write_byte(led->client, reg, BD2802_CURRENT_000); + + bd2802_update_state(led, id, color, BD2802_OFF); +} + +static void bd2802_restore_state(struct bd2802_led *led) +{ + int i; + + for (i = 0; i < LED_NUM; i++) { + if (led->led[i].r) + bd2802_turn_on(led, i, RED, led->led[i].r); + if (led->led[i].g) + bd2802_turn_on(led, i, GREEN, led->led[i].g); + if (led->led[i].b) + bd2802_turn_on(led, i, BLUE, led->led[i].b); + } +} + +#define BD2802_SET_REGISTER(reg_addr, reg_name) \ +static ssize_t bd2802_store_reg##reg_addr(struct device *dev, \ + struct device_attribute *attr, const char *buf, size_t count) \ +{ \ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\ + unsigned long val; \ + int ret; \ + if (!count) \ + return -EINVAL; \ + ret = strict_strtoul(buf, 16, &val); \ + if (ret) \ + return ret; \ + down_write(&led->rwsem); \ + bd2802_write_byte(led->client, reg_addr, (u8) val); \ + up_write(&led->rwsem); \ + return count; \ +} \ +static struct device_attribute bd2802_reg##reg_addr##_attr = { \ + .attr = {.name = reg_name, .mode = 0644, .owner = THIS_MODULE}, \ + .store = bd2802_store_reg##reg_addr, \ +}; + +BD2802_SET_REGISTER(0x00, "0x00"); +BD2802_SET_REGISTER(0x01, "0x01"); +BD2802_SET_REGISTER(0x02, "0x02"); +BD2802_SET_REGISTER(0x03, "0x03"); +BD2802_SET_REGISTER(0x04, "0x04"); +BD2802_SET_REGISTER(0x05, "0x05"); +BD2802_SET_REGISTER(0x06, "0x06"); +BD2802_SET_REGISTER(0x07, "0x07"); +BD2802_SET_REGISTER(0x08, "0x08"); +BD2802_SET_REGISTER(0x09, "0x09"); +BD2802_SET_REGISTER(0x0a, "0x0a"); +BD2802_SET_REGISTER(0x0b, "0x0b"); +BD2802_SET_REGISTER(0x0c, "0x0c"); +BD2802_SET_REGISTER(0x0d, "0x0d"); +BD2802_SET_REGISTER(0x0e, "0x0e"); +BD2802_SET_REGISTER(0x0f, "0x0f"); +BD2802_SET_REGISTER(0x10, "0x10"); +BD2802_SET_REGISTER(0x11, "0x11"); +BD2802_SET_REGISTER(0x12, "0x12"); +BD2802_SET_REGISTER(0x13, "0x13"); +BD2802_SET_REGISTER(0x14, "0x14"); +BD2802_SET_REGISTER(0x15, "0x15"); + +static struct device_attribute *bd2802_addr_attributes[] = { + &bd2802_reg0x00_attr, + &bd2802_reg0x01_attr, + &bd2802_reg0x02_attr, + &bd2802_reg0x03_attr, + &bd2802_reg0x04_attr, + &bd2802_reg0x05_attr, + &bd2802_reg0x06_attr, + &bd2802_reg0x07_attr, + &bd2802_reg0x08_attr, + &bd2802_reg0x09_attr, + &bd2802_reg0x0a_attr, + &bd2802_reg0x0b_attr, + &bd2802_reg0x0c_attr, + &bd2802_reg0x0d_attr, + &bd2802_reg0x0e_attr, + &bd2802_reg0x0f_attr, + &bd2802_reg0x10_attr, + &bd2802_reg0x11_attr, + &bd2802_reg0x12_attr, + &bd2802_reg0x13_attr, + &bd2802_reg0x14_attr, + &bd2802_reg0x15_attr, +}; + +static void bd2802_enable_adv_conf(struct bd2802_led *led) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++) { + ret = device_create_file(&led->client->dev, + bd2802_addr_attributes[i]); + if (ret) { + dev_err(&led->client->dev, "failed to sysfs file %s\n", + bd2802_addr_attributes[i]->attr.name); + goto failed_remove_files; + } + } + + if (bd2802_is_all_off(led)) + bd2802_reset_cancel(led); + + led->adf_on = 1; + + return; + +failed_remove_files: + for (i--; i >= 0; i--) + device_remove_file(&led->client->dev, + bd2802_addr_attributes[i]); +} + +static void bd2802_disable_adv_conf(struct bd2802_led *led) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++) + device_remove_file(&led->client->dev, + bd2802_addr_attributes[i]); + + if (bd2802_is_all_off(led)) + gpio_set_value(led->pdata->reset_gpio, 0); + + led->adf_on = 0; +} + +static ssize_t bd2802_show_adv_conf(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev)); + ssize_t ret; + + down_read(&led->rwsem); + if (led->adf_on) + ret = sprintf(buf, "on\n"); + else + ret = sprintf(buf, "off\n"); + up_read(&led->rwsem); + + return ret; +} + +static ssize_t bd2802_store_adv_conf(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev)); + + if (!count) + return -EINVAL; + + down_write(&led->rwsem); + if (!led->adf_on && !strncmp(buf, "on", 2)) + bd2802_enable_adv_conf(led); + else if (led->adf_on && !strncmp(buf, "off", 3)) + bd2802_disable_adv_conf(led); + up_write(&led->rwsem); + + return count; +} + +static struct device_attribute bd2802_adv_conf_attr = { + .attr = { + .name = "advanced_configuration", + .mode = 0644, + .owner = THIS_MODULE + }, + .show = bd2802_show_adv_conf, + .store = bd2802_store_adv_conf, +}; + +static void bd2802_led_work(struct work_struct *work) +{ + struct bd2802_led *led = container_of(work, struct bd2802_led, work); + + if (led->state) + bd2802_turn_on(led, led->led_id, led->color, led->state); + else + bd2802_turn_off(led, led->led_id, led->color); +} + +#define BD2802_CONTROL_RGBS(name, id, clr) \ +static void bd2802_set_##name##_brightness(struct led_classdev *led_cdev,\ + enum led_brightness value) \ +{ \ + struct bd2802_led *led = \ + container_of(led_cdev, struct bd2802_led, cdev_##name); \ + led->led_id = id; \ + led->color = clr; \ + if (value == LED_OFF) \ + led->state = BD2802_OFF; \ + else \ + led->state = BD2802_ON; \ + schedule_work(&led->work); \ +} \ +static int bd2802_set_##name##_blink(struct led_classdev *led_cdev, \ + unsigned long *delay_on, unsigned long *delay_off) \ +{ \ + struct bd2802_led *led = \ + container_of(led_cdev, struct bd2802_led, cdev_##name); \ + if (*delay_on == 0 || *delay_off == 0) \ + return -EINVAL; \ + led->led_id = id; \ + led->color = clr; \ + led->state = BD2802_BLINK; \ + schedule_work(&led->work); \ + return 0; \ +} + +BD2802_CONTROL_RGBS(led1r, LED1, RED); +BD2802_CONTROL_RGBS(led1g, LED1, GREEN); +BD2802_CONTROL_RGBS(led1b, LED1, BLUE); +BD2802_CONTROL_RGBS(led2r, LED2, RED); +BD2802_CONTROL_RGBS(led2g, LED2, GREEN); +BD2802_CONTROL_RGBS(led2b, LED2, BLUE); + +static int bd2802_register_led_classdev(struct bd2802_led *led) +{ + int ret; + + INIT_WORK(&led->work, bd2802_led_work); + + led->cdev_led1r.name = "led1_R"; + led->cdev_led1r.brightness = LED_OFF; + led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness; + led->cdev_led1r.blink_set = bd2802_set_led1r_blink; + led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME; + + ret = led_classdev_register(&led->client->dev, &led->cdev_led1r); + if (ret < 0) { + dev_err(&led->client->dev, "couldn't register LED %s\n", + led->cdev_led1r.name); + goto failed_unregister_led1_R; + } + + led->cdev_led1g.name = "led1_G"; + led->cdev_led1g.brightness = LED_OFF; + led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness; + led->cdev_led1g.blink_set = bd2802_set_led1g_blink; + led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME; + + ret = led_classdev_register(&led->client->dev, &led->cdev_led1g); + if (ret < 0) { + dev_err(&led->client->dev, "couldn't register LED %s\n", + led->cdev_led1g.name); + goto failed_unregister_led1_G; + } + + led->cdev_led1b.name = "led1_B"; + led->cdev_led1b.brightness = LED_OFF; + led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness; + led->cdev_led1b.blink_set = bd2802_set_led1b_blink; + led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME; + + ret = led_classdev_register(&led->client->dev, &led->cdev_led1b); + if (ret < 0) { + dev_err(&led->client->dev, "couldn't register LED %s\n", + led->cdev_led1b.name); + goto failed_unregister_led1_B; + } + + led->cdev_led2r.name = "led2_R"; + led->cdev_led2r.brightness = LED_OFF; + led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness; + led->cdev_led2r.blink_set = bd2802_set_led2r_blink; + led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME; + + ret = led_classdev_register(&led->client->dev, &led->cdev_led2r); + if (ret < 0) { + dev_err(&led->client->dev, "couldn't register LED %s\n", + led->cdev_led2r.name); + goto failed_unregister_led2_R; + } + + led->cdev_led2g.name = "led2_G"; + led->cdev_led2g.brightness = LED_OFF; + led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness; + led->cdev_led2g.blink_set = bd2802_set_led2g_blink; + led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME; + + ret = led_classdev_register(&led->client->dev, &led->cdev_led2g); + if (ret < 0) { + dev_err(&led->client->dev, "couldn't register LED %s\n", + led->cdev_led2g.name); + goto failed_unregister_led2_G; + } + + led->cdev_led2b.name = "led2_B"; + led->cdev_led2b.brightness = LED_OFF; + led->cdev_led2b.brightness_set = bd2802_set_led2b_brightness; + led->cdev_led2b.blink_set = bd2802_set_led2b_blink; + led->cdev_led2b.flags |= LED_CORE_SUSPENDRESUME; + + ret = led_classdev_register(&led->client->dev, &led->cdev_led2b); + if (ret < 0) { + dev_err(&led->client->dev, "couldn't register LED %s\n", + led->cdev_led2b.name); + goto failed_unregister_led2_B; + } + + return 0; + +failed_unregister_led2_B: + led_classdev_unregister(&led->cdev_led2g); +failed_unregister_led2_G: + led_classdev_unregister(&led->cdev_led2r); +failed_unregister_led2_R: + led_classdev_unregister(&led->cdev_led1b); +failed_unregister_led1_B: + led_classdev_unregister(&led->cdev_led1g); +failed_unregister_led1_G: + led_classdev_unregister(&led->cdev_led1r); +failed_unregister_led1_R: + + return ret; +} + +static void bd2802_unregister_led_classdev(struct bd2802_led *led) +{ + cancel_work_sync(&led->work); + led_classdev_unregister(&led->cdev_led1r); +} + +static int __devinit bd2802_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bd2802_led *led; + struct bd2802_led_platform_data *pdata; + int ret; + + led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL); + if (!led) { + dev_err(&client->dev, "failed to allocate driver data\n"); + return -ENOMEM; + } + + led->client = client; + pdata = led->pdata = client->dev.platform_data; + i2c_set_clientdata(client, led); + + /* Configure RESET GPIO (L: RESET, H: RESET cancel) */ + gpio_request(pdata->reset_gpio, "RGB_RESETB"); + gpio_direction_output(pdata->reset_gpio, 1); + + /* Tacss = min 0.1ms */ + udelay(100); + + /* Detect BD2802GU */ + ret = bd2802_write_byte(client, BD2802_REG_CLKSETUP, 0x00); + if (ret < 0) { + dev_err(&client->dev, "failed to detect device\n"); + goto failed_free; + } else + dev_info(&client->dev, "return 0x%02x\n", ret); + + /* To save the power, reset BD2802 after detecting */ + gpio_set_value(led->pdata->reset_gpio, 0); + + init_rwsem(&led->rwsem); + + ret = device_create_file(&client->dev, &bd2802_adv_conf_attr); + if (ret) { + dev_err(&client->dev, "failed to create sysfs file %s\n", + bd2802_adv_conf_attr.attr.name); + goto failed_free; + } + + ret = bd2802_register_led_classdev(led); + if (ret < 0) + goto failed_unregister_dev_file; + + return 0; + +failed_unregister_dev_file: + device_remove_file(&client->dev, &bd2802_adv_conf_attr); +failed_free: + i2c_set_clientdata(client, NULL); + kfree(led); + + return ret; +} + +static int __exit bd2802_remove(struct i2c_client *client) +{ + struct bd2802_led *led = i2c_get_clientdata(client); + + bd2802_unregister_led_classdev(led); + gpio_set_value(led->pdata->reset_gpio, 0); + if (led->adf_on) + bd2802_disable_adv_conf(led); + device_remove_file(&client->dev, &bd2802_adv_conf_attr); + i2c_set_clientdata(client, NULL); + kfree(led); + + return 0; +} + +static int bd2802_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct bd2802_led *led = i2c_get_clientdata(client); + + gpio_set_value(led->pdata->reset_gpio, 0); + + return 0; +} + +static int bd2802_resume(struct i2c_client *client) +{ + struct bd2802_led *led = i2c_get_clientdata(client); + + if (!bd2802_is_all_off(led) || led->adf_on) { + gpio_set_value(led->pdata->reset_gpio, 1); + udelay(100); + bd2802_restore_state(led); + } + + return 0; +} + +static const struct i2c_device_id bd2802_id[] = { + { "BD2802", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bd2802_id); + +static struct i2c_driver bd2802_i2c_driver = { + .driver = { + .name = "BD2802", + }, + .probe = bd2802_probe, + .remove = __exit_p(bd2802_remove), + .suspend = bd2802_suspend, + .resume = bd2802_resume, + .id_table = bd2802_id, +}; + +static int __init bd2802_init(void) +{ + return i2c_add_driver(&bd2802_i2c_driver); +} +module_init(bd2802_init); + +static void __exit bd2802_exit(void) +{ + i2c_del_driver(&bd2802_i2c_driver); +} +module_exit(bd2802_exit); + +MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>"); +MODULE_DESCRIPTION("BD2802 LED driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/leds-bd2802.h b/include/linux/leds-bd2802.h new file mode 100644 index 000000000000..42f854a1a199 --- /dev/null +++ b/include/linux/leds-bd2802.h @@ -0,0 +1,26 @@ +/* + * leds-bd2802.h - RGB LED Driver + * + * Copyright (C) 2009 Samsung Electronics + * Kim Kyuwon <q1.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf + * + */ +#ifndef _LEDS_BD2802_H_ +#define _LEDS_BD2802_H_ + +struct bd2802_led_platform_data{ + int reset_gpio; + u8 rgb_time; +}; + +#define RGB_TIME(slopedown, slopeup, waveform) \ + ((slopedown) << 6 | (slopeup) << 4 | (waveform)) + +#endif /* _LEDS_BD2802_H_ */ + |