summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/ucd9000110
-rw-r--r--drivers/hwmon/Kconfig14
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/ucd9000.c278
4 files changed, 402 insertions, 1 deletions
diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000
new file mode 100644
index 000000000000..40ca6db50c48
--- /dev/null
+++ b/Documentation/hwmon/ucd9000
@@ -0,0 +1,110 @@
+Kernel driver ucd9000
+=====================
+
+Supported chips:
+ * TI UCD90120, UCD90124, UCD9090, and UCD90910
+ Prefixes: 'ucd90120', 'ucd90124', 'ucd9090', 'ucd90910'
+ Addresses scanned: -
+ Datasheets:
+ http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
+ http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
+ http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
+ http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+From datasheets:
+
+The UCD90120 Power Supply Sequencer and System Health Monitor monitors and
+sequences up to 12 independent voltage rails. The device integrates a 12-bit
+ADC with a 2.5V internal reference for monitoring up to 13 power supply voltage,
+current, or temperature inputs.
+
+The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and
+system-health monitor. The device integrates a 12-bit ADC for monitoring up to
+13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins
+can be used for power supply enables, power-on reset signals, external
+interrupts, cascading, or other system functions. Twelve of these pins offer PWM
+functionality. Using these pins, the UCD90124 offers support for fan control,
+margining, and general-purpose PWM functions.
+
+The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and
+monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply
+voltage inputs. Twenty-three GPIO pins can be used for power supply enables,
+power-on reset signals, external interrupts, cascading, or other system
+functions. Ten of these pins offer PWM functionality. Using these pins, the
+UCD9090 offers support for margining, and general-purpose PWM functions.
+
+The UCD90910 is a ten-rail I2C / PMBus addressable power-supply sequencer and
+system-health monitor. The device integrates a 12-bit ADC for monitoring up to
+13 power-supply voltage, current, or temperature inputs.
+
+This driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data. Please see
+Documentation/hwmon/pmbus for details.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-12]_label "vout[1-12]".
+in[1-12]_input Measured voltage. From READ_VOUT register.
+in[1-12]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-12]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr[1-12]_label "iout[1-12]".
+curr[1-12]_input Measured current. From READ_IOUT register.
+curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[1-12]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+ register.
+curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
+curr[1-12]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+
+ For each attribute index, either voltage or current is
+ reported, but not both. If voltage or current is
+ reported depends on the chip configuration.
+
+temp[1-2]_input Measured temperatures. From READ_TEMPERATURE_1 and
+ READ_TEMPERATURE_2 registers.
+temp[1-2]_max Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-2]_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-2]_max_alarm Temperature high alarm.
+temp[1-2]_crit_alarm Temperature critical high alarm.
+
+fan[1-4]_input Fan RPM.
+fan[1-4]_alarm Fan alarm.
+fan[1-4]_fault Fan fault.
+
+ Fan attributes are only available on chips supporting
+ fan control (UCD90124, UCD90910). Attribute files are
+ created only for enabled fans.
+ Note that even though UCD90910 supports up to 10 fans,
+ only up to four fans are currently supported.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 07c4a860dffe..d00fd39f6ee3 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -857,12 +857,24 @@ config SENSORS_MAX8688
This driver can also be built as a module. If so, the module will
be called max8688.
+config SENSORS_UCD9000
+ tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for TI
+ UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
+ Controllers.
+
+ This driver can also be built as a module. If so, the module will
+ be called ucd9000.
+
config SENSORS_UCD9200
tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
default n
help
If you say yes here you get hardware monitoring support for TI
- UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248.
+ UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+ Digital PWM System Controllers.
This driver can also be built as a module. If so, the module will
be called ucd9200.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 1afe02961dec..c4a269b06925 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
+obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
diff --git a/drivers/hwmon/ucd9000.c b/drivers/hwmon/ucd9000.c
new file mode 100644
index 000000000000..ace1c7319734
--- /dev/null
+++ b/drivers/hwmon/ucd9000.c
@@ -0,0 +1,278 @@
+/*
+ * Hardware monitoring driver for UCD90xxx Sequencer and System Health
+ * Controller series
+ *
+ * Copyright (C) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pmbus.h>
+#include "pmbus.h"
+
+enum chips { ucd9000, ucd90120, ucd90124, ucd9090, ucd90910 };
+
+#define UCD9000_MONITOR_CONFIG 0xd5
+#define UCD9000_NUM_PAGES 0xd6
+#define UCD9000_FAN_CONFIG_INDEX 0xe7
+#define UCD9000_FAN_CONFIG 0xe8
+#define UCD9000_DEVICE_ID 0xfd
+
+#define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07)
+#define UCD9000_MON_PAGE(x) ((x) & 0x0f)
+
+#define UCD9000_MON_VOLTAGE 1
+#define UCD9000_MON_TEMPERATURE 2
+#define UCD9000_MON_CURRENT 3
+#define UCD9000_MON_VOLTAGE_HW 4
+
+#define UCD9000_NUM_FAN 4
+
+struct ucd9000_data {
+ u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
+ struct pmbus_driver_info info;
+};
+#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
+
+static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
+{
+ int fan_config = 0;
+ struct ucd9000_data *data
+ = to_ucd9000_data(pmbus_get_driver_info(client));
+
+ if (data->fan_data[fan][3] & 1)
+ fan_config |= PB_FAN_2_INSTALLED; /* Use lower bit position */
+
+ /* Pulses/revolution */
+ fan_config |= (data->fan_data[fan][3] & 0x06) >> 1;
+
+ return fan_config;
+}
+
+static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret = 0;
+ int fan_config;
+
+ switch (reg) {
+ case PMBUS_FAN_CONFIG_12:
+ if (page)
+ return -EINVAL;
+
+ ret = ucd9000_get_fan_config(client, 0);
+ if (ret < 0)
+ return ret;
+ fan_config = ret << 4;
+ ret = ucd9000_get_fan_config(client, 1);
+ if (ret < 0)
+ return ret;
+ fan_config |= ret;
+ ret = fan_config;
+ break;
+ case PMBUS_FAN_CONFIG_34:
+ if (page)
+ return -EINVAL;
+
+ ret = ucd9000_get_fan_config(client, 2);
+ if (ret < 0)
+ return ret;
+ fan_config = ret << 4;
+ ret = ucd9000_get_fan_config(client, 3);
+ if (ret < 0)
+ return ret;
+ fan_config |= ret;
+ ret = fan_config;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static const struct i2c_device_id ucd9000_id[] = {
+ {"ucd9000", ucd9000},
+ {"ucd90120", ucd90120},
+ {"ucd90124", ucd90124},
+ {"ucd9090", ucd9090},
+ {"ucd90910", ucd90910},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ucd9000_id);
+
+static int ucd9000_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+ struct ucd9000_data *data;
+ struct pmbus_driver_info *info;
+ const struct i2c_device_id *mid;
+ int i, ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA))
+ return -ENODEV;
+
+ ret = i2c_smbus_read_block_data(client, UCD9000_DEVICE_ID,
+ block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device ID\n");
+ return ret;
+ }
+ block_buffer[ret] = '\0';
+ dev_info(&client->dev, "Device ID %s\n", block_buffer);
+
+ mid = NULL;
+ for (i = 0; i < ARRAY_SIZE(ucd9000_id); i++) {
+ mid = &ucd9000_id[i];
+ if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
+ break;
+ }
+ if (!mid || !strlen(mid->name)) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+
+ if (id->driver_data != ucd9000 && id->driver_data != mid->driver_data)
+ dev_notice(&client->dev,
+ "Device mismatch: Configured %s, detected %s\n",
+ id->name, mid->name);
+
+ data = kzalloc(sizeof(struct ucd9000_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ info = &data->info;
+
+ ret = i2c_smbus_read_byte_data(client, UCD9000_NUM_PAGES);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to read number of active pages\n");
+ goto out;
+ }
+ info->pages = ret;
+ if (!info->pages) {
+ dev_err(&client->dev, "No pages configured\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* The internal temperature sensor is always active */
+ info->func[0] = PMBUS_HAVE_TEMP;
+
+ /* Everything else is configurable */
+ ret = i2c_smbus_read_block_data(client, UCD9000_MONITOR_CONFIG,
+ block_buffer);
+ if (ret <= 0) {
+ dev_err(&client->dev, "Failed to read configuration data\n");
+ ret = -ENODEV;
+ goto out;
+ }
+ for (i = 0; i < ret; i++) {
+ int page = UCD9000_MON_PAGE(block_buffer[i]);
+
+ if (page >= info->pages)
+ continue;
+
+ switch (UCD9000_MON_TYPE(block_buffer[i])) {
+ case UCD9000_MON_VOLTAGE:
+ case UCD9000_MON_VOLTAGE_HW:
+ info->func[page] |= PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_STATUS_VOUT;
+ break;
+ case UCD9000_MON_TEMPERATURE:
+ info->func[page] |= PMBUS_HAVE_TEMP2
+ | PMBUS_HAVE_STATUS_TEMP;
+ break;
+ case UCD9000_MON_CURRENT:
+ info->func[page] |= PMBUS_HAVE_IOUT
+ | PMBUS_HAVE_STATUS_IOUT;
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Fan configuration */
+ if (mid->driver_data == ucd90124) {
+ for (i = 0; i < UCD9000_NUM_FAN; i++) {
+ i2c_smbus_write_byte_data(client,
+ UCD9000_FAN_CONFIG_INDEX, i);
+ ret = i2c_smbus_read_block_data(client,
+ UCD9000_FAN_CONFIG,
+ data->fan_data[i]);
+ if (ret < 0)
+ goto out;
+ }
+ i2c_smbus_write_byte_data(client, UCD9000_FAN_CONFIG_INDEX, 0);
+
+ info->read_byte_data = ucd9000_read_byte_data;
+ info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12
+ | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34;
+ }
+
+ ret = pmbus_do_probe(client, mid, info);
+ if (ret < 0)
+ goto out;
+ return 0;
+
+out:
+ kfree(data);
+ return ret;
+}
+
+static int ucd9000_remove(struct i2c_client *client)
+{
+ int ret;
+ struct ucd9000_data *data;
+
+ data = to_ucd9000_data(pmbus_get_driver_info(client));
+ ret = pmbus_do_remove(client);
+ kfree(data);
+ return ret;
+}
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ucd9000_driver = {
+ .driver = {
+ .name = "ucd9000",
+ },
+ .probe = ucd9000_probe,
+ .remove = ucd9000_remove,
+ .id_table = ucd9000_id,
+};
+
+static int __init ucd9000_init(void)
+{
+ return i2c_add_driver(&ucd9000_driver);
+}
+
+static void __exit ucd9000_exit(void)
+{
+ i2c_del_driver(&ucd9000_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx");
+MODULE_LICENSE("GPL");
+module_init(ucd9000_init);
+module_exit(ucd9000_exit);