diff options
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt | 22 | ||||
| -rw-r--r-- | drivers/pinctrl/pinctrl-imx1-core.c | 7 |
2 files changed, 29 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt index 353eca0efbf8..d1706ea82572 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt @@ -52,12 +52,25 @@ Required properties for pin configuration node: CONFIG can be 0 or 1, meaning Pullup disable/enable. +The iomux controller has gpio child nodes which are embedded in the iomux +control registers. They have to be defined as child nodes of the iomux device +node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges" +properties for the iomux device node are required. Example: iomuxc: iomuxc@10015000 { compatible = "fsl,imx27-iomuxc"; reg = <0x10015000 0x600>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@10015000 { + ... + }; + + ... uart { pinctrl_uart1: uart-1 { @@ -83,6 +96,15 @@ The above example using macros: iomuxc: iomuxc@10015000 { compatible = "fsl,imx27-iomuxc"; reg = <0x10015000 0x600>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@10015000 { + ... + }; + + ... uart { pinctrl_uart1: uart-1 { diff --git a/drivers/pinctrl/pinctrl-imx1-core.c b/drivers/pinctrl/pinctrl-imx1-core.c index f77914ac081a..17aecde1b51d 100644 --- a/drivers/pinctrl/pinctrl-imx1-core.c +++ b/drivers/pinctrl/pinctrl-imx1-core.c @@ -638,6 +638,13 @@ int imx1_pinctrl_core_probe(struct platform_device *pdev, return -EINVAL; } + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); + if (ret) { + pinctrl_unregister(ipctl->pctl); + dev_err(&pdev->dev, "Failed to populate subdevices\n"); + return ret; + } + dev_info(&pdev->dev, "initialized IMX pinctrl driver\n"); return 0; |