summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt83
-rw-r--r--Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt97
-rw-r--r--arch/mips/Kconfig2
-rw-r--r--arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h2
-rw-r--r--arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h4
-rw-r--r--arch/mips/include/asm/mach-lantiq/gpio.h5
-rw-r--r--arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h2
-rw-r--r--arch/mips/lantiq/Kconfig2
-rw-r--r--arch/mips/lantiq/falcon/prom.c5
-rw-r--r--arch/mips/lantiq/falcon/sysctrl.c1
-rw-r--r--arch/mips/lantiq/irq.c82
-rw-r--r--arch/mips/lantiq/xway/Makefile2
-rw-r--r--arch/mips/lantiq/xway/gpio.c183
-rw-r--r--arch/mips/lantiq/xway/gptu.c214
-rw-r--r--arch/mips/lantiq/xway/sysctrl.c3
-rw-r--r--drivers/gpio/gpio-stp-xway.c2
-rw-r--r--drivers/pinctrl/Kconfig16
-rw-r--r--drivers/pinctrl/Makefile3
-rw-r--r--drivers/pinctrl/pinctrl-falcon.c468
-rw-r--r--drivers/pinctrl/pinctrl-lantiq.c342
-rw-r--r--drivers/pinctrl/pinctrl-lantiq.h194
-rw-r--r--drivers/pinctrl/pinctrl-xway.c781
22 files changed, 2272 insertions, 221 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt
new file mode 100644
index 000000000000..daa768956069
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt
@@ -0,0 +1,83 @@
+Lantiq FALCON pinmux controller
+
+Required properties:
+- compatible: "lantiq,pinctrl-falcon"
+- reg: Should contain the physical address and length of the gpio/pinmux
+ register range
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Lantiq's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and two pin configuration parameters:
+pull-up and open-drain
+
+The name of each subnode is not important as long as it is unique; all subnodes
+should be enumerated and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+We support 2 types of nodes.
+
+Definition of mux function groups:
+
+Required subnode-properties:
+- lantiq,groups : An array of strings. Each string contains the name of a group.
+ Valid values for these names are listed below.
+- lantiq,function: A string containing the name of the function to mux to the
+ group. Valid values for function names are listed below.
+
+Valid values for group and function names:
+
+ mux groups:
+ por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c,
+ jtag, slic, pcm, asc1
+
+ functions:
+ rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm
+
+
+Definition of pin configurations:
+
+Required subnode-properties:
+- lantiq,pins : An array of strings. Each string contains the name of a pin.
+ Valid values for these names are listed below.
+
+Optional subnode-properties:
+- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
+ 0: none, 1: down
+- lantiq,drive-current: Boolean, enables drive-current
+- lantiq,slew-rate: Boolean, enables slew-rate
+
+Example:
+ pinmux0 {
+ compatible = "lantiq,pinctrl-falcon";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ asc0 {
+ lantiq,groups = "asc0";
+ lantiq,function = "asc";
+ };
+ ntr {
+ lantiq,groups = "ntr8k";
+ lantiq,function = "ntr";
+ };
+ i2c {
+ lantiq,groups = "i2c";
+ lantiq,function = "i2c";
+ };
+ hrst {
+ lantiq,groups = "hrst";
+ lantiq,function = "rst";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt
new file mode 100644
index 000000000000..b5469db1d7ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt
@@ -0,0 +1,97 @@
+Lantiq XWAY pinmux controller
+
+Required properties:
+- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9"
+- reg: Should contain the physical address and length of the gpio/pinmux
+ register range
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Lantiq's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and two pin configuration parameters:
+pull-up and open-drain
+
+The name of each subnode is not important as long as it is unique; all subnodes
+should be enumerated and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+We support 2 types of nodes.
+
+Definition of mux function groups:
+
+Required subnode-properties:
+- lantiq,groups : An array of strings. Each string contains the name of a group.
+ Valid values for these names are listed below.
+- lantiq,function: A string containing the name of the function to mux to the
+ group. Valid values for function names are listed below.
+
+Valid values for group and function names:
+
+ mux groups:
+ exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
+ ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3,
+ spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2,
+ gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2,
+ req3
+
+ additional mux groups (XR9 only):
+ mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4
+
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio
+
+
+
+Definition of pin configurations:
+
+Required subnode-properties:
+- lantiq,pins : An array of strings. Each string contains the name of a pin.
+ Valid values for these names are listed below.
+
+Optional subnode-properties:
+- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
+ 0: none, 1: down, 2: up.
+- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
+
+Valid values for XWAY pin names:
+ Pinconf pins can be referenced via the names io0-io31.
+
+Valid values for XR9 pin names:
+ Pinconf pins can be referenced via the names io0-io55.
+
+Example:
+ gpio: pinmux@E100B10 {
+ compatible = "lantiq,pinctrl-xway";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ };
+ pci {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ };
+ conf_out {
+ lantiq,pins = "io4", "io5", "io6"; /* stp */
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ };
+ };
+ };
+
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 386ff651ecaf..c0cbde6c1770 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -242,6 +242,8 @@ config LANTIQ
select HAVE_MACH_CLKDEV
select CLKDEV_LOOKUP
select USE_OF
+ select PINCTRL
+ select PINCTRL_LANTIQ
config LASAT
bool "LASAT Networks platforms"
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
index 318f982f04ff..c6b63a409641 100644
--- a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
@@ -20,4 +20,6 @@
#define MIPS_CPU_TIMER_IRQ 7
+#define MAX_IM 5
+
#endif /* _FALCON_IRQ__ */
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
index b385252584ee..fccac3592651 100644
--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
@@ -57,6 +57,10 @@ extern __iomem void *ltq_sys1_membase;
#define ltq_sys1_w32_mask(clear, set, reg) \
ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
+/* allow the gpio and pinctrl drivers to talk to eachother */
+extern int pinctrl_falcon_get_range_size(int id);
+extern void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range);
+
/*
* to keep the irq code generic we need to define this to 0 as falcon
* has no EIU/EBU
diff --git a/arch/mips/include/asm/mach-lantiq/gpio.h b/arch/mips/include/asm/mach-lantiq/gpio.h
index f79505b43609..9ba1caebca5f 100644
--- a/arch/mips/include/asm/mach-lantiq/gpio.h
+++ b/arch/mips/include/asm/mach-lantiq/gpio.h
@@ -1,10 +1,7 @@
#ifndef __ASM_MIPS_MACH_LANTIQ_GPIO_H
#define __ASM_MIPS_MACH_LANTIQ_GPIO_H
-static inline int gpio_to_irq(unsigned int gpio)
-{
- return -1;
-}
+#define gpio_to_irq __gpio_to_irq
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
index aa0b3b866f84..5eadfe582529 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
@@ -21,4 +21,6 @@
#define MIPS_CPU_TIMER_IRQ 7
+#define MAX_IM 5
+
#endif
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index 20bdf40b3efa..d84f361f1e45 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -2,6 +2,7 @@ if LANTIQ
config SOC_TYPE_XWAY
bool
+ select PINCTRL_XWAY
default n
choice
@@ -19,6 +20,7 @@ config SOC_XWAY
config SOC_FALCON
bool "FALCON"
+ select PINCTRL_FALCON
endchoice
diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
index c1d278f05a3a..aa9497947859 100644
--- a/arch/mips/lantiq/falcon/prom.c
+++ b/arch/mips/lantiq/falcon/prom.c
@@ -8,6 +8,8 @@
*/
#include <linux/kernel.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
#include <asm/io.h>
#include <lantiq_soc.h>
@@ -84,4 +86,7 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
unreachable();
break;
}
+
+ board_nmi_handler_setup = ltq_soc_nmi_setup;
+ board_ejtag_handler_setup = ltq_soc_ejtag_setup;
}
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
index ba0123d13d40..2d4ced332b37 100644
--- a/arch/mips/lantiq/falcon/sysctrl.c
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -171,6 +171,7 @@ static inline void clkdev_add_sys(const char *dev, unsigned int module,
clk->cl.con_id = NULL;
clk->cl.clk = clk;
clk->module = module;
+ clk->bits = bits;
clk->activate = sysctl_activate;
clk->deactivate = sysctl_deactivate;
clk->enable = sysctl_clken;
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index 57c1a4e51408..f36acd1b3808 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -55,8 +55,8 @@
*/
#define LTQ_ICU_EBU_IRQ 22
-#define ltq_icu_w32(x, y) ltq_w32((x), ltq_icu_membase + (y))
-#define ltq_icu_r32(x) ltq_r32(ltq_icu_membase + (x))
+#define ltq_icu_w32(m, x, y) ltq_w32((x), ltq_icu_membase[m] + (y))
+#define ltq_icu_r32(m, x) ltq_r32(ltq_icu_membase[m] + (x))
#define ltq_eiu_w32(x, y) ltq_w32((x), ltq_eiu_membase + (y))
#define ltq_eiu_r32(x) ltq_r32(ltq_eiu_membase + (x))
@@ -82,17 +82,18 @@ static unsigned short ltq_eiu_irq[MAX_EIU] = {
};
static int exin_avail;
-static void __iomem *ltq_icu_membase;
+static void __iomem *ltq_icu_membase[MAX_IM];
static void __iomem *ltq_eiu_membase;
+static struct irq_domain *ltq_domain;
void ltq_disable_irq(struct irq_data *d)
{
u32 ier = LTQ_ICU_IM0_IER;
int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
+ int im = offset / INT_NUM_IM_OFFSET;
- ier += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET);
offset %= INT_NUM_IM_OFFSET;
- ltq_icu_w32(ltq_icu_r32(ier) & ~BIT(offset), ier);
+ ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
}
void ltq_mask_and_ack_irq(struct irq_data *d)
@@ -100,32 +101,31 @@ void ltq_mask_and_ack_irq(struct irq_data *d)
u32 ier = LTQ_ICU_IM0_IER;
u32 isr = LTQ_ICU_IM0_ISR;
int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
+ int im = offset / INT_NUM_IM_OFFSET;
- ier += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET);
- isr += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET);
offset %= INT_NUM_IM_OFFSET;
- ltq_icu_w32(ltq_icu_r32(ier) & ~BIT(offset), ier);
- ltq_icu_w32(BIT(offset), isr);
+ ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
+ ltq_icu_w32(im, BIT(offset), isr);
}
static void ltq_ack_irq(struct irq_data *d)
{
u32 isr = LTQ_ICU_IM0_ISR;
int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
+ int im = offset / INT_NUM_IM_OFFSET;
- isr += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET);
offset %= INT_NUM_IM_OFFSET;
- ltq_icu_w32(BIT(offset), isr);
+ ltq_icu_w32(im, BIT(offset), isr);
}
void ltq_enable_irq(struct irq_data *d)
{
u32 ier = LTQ_ICU_IM0_IER;
int offset = d->hwirq - MIPS_CPU_IRQ_CASCADE;
+ int im = offset / INT_NUM_IM_OFFSET;
- ier += LTQ_ICU_OFFSET * (offset / INT_NUM_IM_OFFSET);
offset %= INT_NUM_IM_OFFSET;
- ltq_icu_w32(ltq_icu_r32(ier) | BIT(offset), ier);
+ ltq_icu_w32(im, ltq_icu_r32(im, ier) | BIT(offset), ier);
}
static unsigned int ltq_startup_eiu_irq(struct irq_data *d)
@@ -192,7 +192,7 @@ static void ltq_hw_irqdispatch(int module)
{
u32 irq;
- irq = ltq_icu_r32(LTQ_ICU_IM0_IOSR + (module * LTQ_ICU_OFFSET));
+ irq = ltq_icu_r32(module, LTQ_ICU_IM0_IOSR);
if (irq == 0)
return;
@@ -220,10 +220,14 @@ DEFINE_HWx_IRQDISPATCH(2)
DEFINE_HWx_IRQDISPATCH(3)
DEFINE_HWx_IRQDISPATCH(4)
+#if MIPS_CPU_TIMER_IRQ == 7
static void ltq_hw5_irqdispatch(void)
{
do_IRQ(MIPS_CPU_TIMER_IRQ);
}
+#else
+DEFINE_HWx_IRQDISPATCH(5)
+#endif
#ifdef CONFIG_MIPS_MT_SMP
void __init arch_init_ipiirq(int irq, struct irqaction *action)
@@ -271,11 +275,11 @@ asmlinkage void plat_irq_dispatch(void)
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
unsigned int i;
- if (pending & CAUSEF_IP7) {
+ if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) {
do_IRQ(MIPS_CPU_TIMER_IRQ);
goto out;
} else {
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < MAX_IM; i++) {
if (pending & (CAUSEF_IP2 << i)) {
ltq_hw_irqdispatch(i);
goto out;
@@ -293,6 +297,9 @@ static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
struct irq_chip *chip = &ltq_irq_type;
int i;
+ if (hw < MIPS_CPU_IRQ_CASCADE)
+ return 0;
+
for (i = 0; i < exin_avail; i++)
if (hw == ltq_eiu_irq[i])
chip = &ltq_eiu_type;
@@ -318,19 +325,23 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
struct resource res;
int i;
- if (of_address_to_resource(node, 0, &res))
- panic("Failed to get icu memory range");
+ for (i = 0; i < MAX_IM; i++) {
+ if (of_address_to_resource(node, i, &res))
+ panic("Failed to get icu memory range");
- if (request_mem_region(res.start, resource_size(&res), res.name) < 0)
- pr_err("Failed to request icu memory");
+ if (request_mem_region(res.start, resource_size(&res),
+ res.name) < 0)
+ pr_err("Failed to request icu memory");
- ltq_icu_membase = ioremap_nocache(res.start, resource_size(&res));
- if (!ltq_icu_membase)
- panic("Failed to remap icu memory");
+ ltq_icu_membase[i] = ioremap_nocache(res.start,
+ resource_size(&res));
+ if (!ltq_icu_membase[i])
+ panic("Failed to remap icu memory");
+ }
/* the external interrupts are optional and xway only */
eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu");
- if (eiu_node && of_address_to_resource(eiu_node, 0, &res)) {
+ if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) {
/* find out how many external irq sources we have */
const __be32 *count = of_get_property(node,
"lantiq,count", NULL);
@@ -351,17 +362,17 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
}
/* turn off all irqs by default */
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < MAX_IM; i++) {
/* make sure all irqs are turned off by default */
- ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET));
+ ltq_icu_w32(i, 0, LTQ_ICU_IM0_IER);
/* clear all possibly pending interrupts */
- ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
+ ltq_icu_w32(i, ~0, LTQ_ICU_IM0_ISR);
}
mips_cpu_irq_init();
- for (i = 2; i <= 6; i++)
- setup_irq(i, &cascade);
+ for (i = 0; i < MAX_IM; i++)
+ setup_irq(i + 2, &cascade);
if (cpu_has_vint) {
pr_info("Setting up vectored interrupts\n");
@@ -373,7 +384,8 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
set_vi_handler(7, ltq_hw5_irqdispatch);
}
- irq_domain_add_linear(node, 6 * INT_NUM_IM_OFFSET,
+ ltq_domain = irq_domain_add_linear(node,
+ (MAX_IM * INT_NUM_IM_OFFSET) + MIPS_CPU_IRQ_CASCADE,
&irq_domain_ops, 0);
#if defined(CONFIG_MIPS_MT_SMP)
@@ -397,12 +409,20 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
/* tell oprofile which irq to use */
cp0_perfcount_irq = LTQ_PERF_IRQ;
+
+ /*
+ * if the timer irq is not one of the mips irqs we need to
+ * create a mapping
+ */
+ if (MIPS_CPU_TIMER_IRQ != 7)
+ irq_create_mapping(ltq_domain, MIPS_CPU_TIMER_IRQ);
+
return 0;
}
unsigned int __cpuinit get_c0_compare_int(void)
{
- return CP0_LEGACY_COMPARE_IRQ;
+ return MIPS_CPU_TIMER_IRQ;
}
static struct of_device_id __initdata of_irq_ids[] = {
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index dc3194f6ee42..70a58c747bd0 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1 +1 @@
-obj-y := prom.o sysctrl.o clk.o reset.o gpio.o dma.o
+obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
deleted file mode 100644
index 2ab39e93d9be..000000000000
--- a/arch/mips/lantiq/xway/gpio.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <lantiq_soc.h>
-
-#define LTQ_GPIO_OUT 0x00
-#define LTQ_GPIO_IN 0x04
-#define LTQ_GPIO_DIR 0x08
-#define LTQ_GPIO_ALTSEL0 0x0C
-#define LTQ_GPIO_ALTSEL1 0x10
-#define LTQ_GPIO_OD 0x14
-
-#define PINS_PER_PORT 16
-#define MAX_PORTS 3
-
-#define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p)))
-#define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r)
-#define ltq_gpio_clearbit(m, r, p) ltq_w32_mask((1 << p), 0, m + r)
-
-struct ltq_gpio {
- void __iomem *membase;
- struct gpio_chip chip;
-};
-
-static struct ltq_gpio ltq_gpio_port[MAX_PORTS];
-
-int ltq_gpio_request(unsigned int pin, unsigned int alt0,
- unsigned int alt1, unsigned int dir, const char *name)
-{
- int id = 0;
-
- if (pin >= (MAX_PORTS * PINS_PER_PORT))
- return -EINVAL;
- if (gpio_request(pin, name)) {
- pr_err("failed to setup lantiq gpio: %s\n", name);
- return -EBUSY;
- }
- if (dir)
- gpio_direction_output(pin, 1);
- else
- gpio_direction_input(pin);
- while (pin >= PINS_PER_PORT) {
- pin -= PINS_PER_PORT;
- id++;
- }
- if (alt0)
- ltq_gpio_setbit(ltq_gpio_port[id].membase,
- LTQ_GPIO_ALTSEL0, pin);
- else
- ltq_gpio_clearbit(ltq_gpio_port[id].membase,
- LTQ_GPIO_ALTSEL0, pin);
- if (alt1)
- ltq_gpio_setbit(ltq_gpio_port[id].membase,
- LTQ_GPIO_ALTSEL1, pin);
- else
- ltq_gpio_clearbit(ltq_gpio_port[id].membase,
- LTQ_GPIO_ALTSEL1, pin);
- return 0;
-}
-EXPORT_SYMBOL(ltq_gpio_request);
-
-static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
-{
- struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
-
- if (value)
- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
- else
- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
-}
-
-static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset)
-{
- struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
-
- return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset);
-}
-
-static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
-{
- struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
-
- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
-
- return 0;
-}
-
-static int ltq_gpio_direction_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
-
- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
- ltq_gpio_set(chip, offset, value);
-
- return 0;
-}
-
-static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset)
-{
- struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
-
- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset);
- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
- return 0;
-}
-
-static int ltq_gpio_probe(struct platform_device *pdev)
-{
- struct resource *res;
-
- if (pdev->id >= MAX_PORTS) {
- dev_err(&pdev->dev, "invalid gpio port %d\n",
- pdev->id);
- return -EINVAL;
- }
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "failed to get memory for gpio port %d\n",
- pdev->id);
- return -ENOENT;
- }
- res = devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), dev_name(&pdev->dev));
- if (!res) {
- dev_err(&pdev->dev,
- "failed to request memory for gpio port %d\n",
- pdev->id);
- return -EBUSY;
- }
- ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev,
- res->start, resource_size(res));
- if (!ltq_gpio_port[pdev->id].membase) {
- dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n",
- pdev->id);
- return -ENOMEM;
- }
- ltq_gpio_port[pdev->id].chip.label = "ltq_gpio";
- ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input;
- ltq_gpio_port[pdev->id].chip.direction_output =
- ltq_gpio_direction_output;
- ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get;
- ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set;
- ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req;
- ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id;
- ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
- platform_set_drvdata(pdev, &ltq_gpio_port[pdev->id]);
- return gpiochip_add(&ltq_gpio_port[pdev->id].chip);
-}
-
-static struct platform_driver
-ltq_gpio_driver = {
- .probe = ltq_gpio_probe,
- .driver = {
- .name = "ltq_gpio",
- .owner = THIS_MODULE,
- },
-};
-
-int __init ltq_gpio_init(void)
-{
- int ret = platform_driver_register(&ltq_gpio_driver);
-
- if (ret)
- pr_info("ltq_gpio : Error registering platform driver!");
- return ret;
-}
-
-postcore_initcall(ltq_gpio_init);
diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c
new file mode 100644
index 000000000000..cbb56fc022bc
--- /dev/null
+++ b/arch/mips/lantiq/xway/gptu.c
@@ -0,0 +1,214 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2012 Lantiq GmbH
+ */
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+
+#include <lantiq_soc.h>
+#include "../clk.h"
+
+/* the magic ID byte of the core */
+#define GPTU_MAGIC 0x59
+/* clock control register */
+#define GPTU_CLC 0x00
+/* id register */
+#define GPTU_ID 0x08
+/* interrupt node enable */
+#define GPTU_IRNEN 0xf4
+/* interrupt control register */
+#define GPTU_IRCR 0xf8
+/* interrupt capture register */
+#define GPTU_IRNCR 0xfc
+/* there are 3 identical blocks of 2 timers. calculate register offsets */
+#define GPTU_SHIFT(x) (x % 2 ? 4 : 0)
+#define GPTU_BASE(x) (((x >> 1) * 0x20) + 0x10)
+/* timer control register */
+#define GPTU_CON(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00)
+/* timer auto reload register */
+#define GPTU_RUN(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08)
+/* timer manual reload register */
+#define GPTU_RLD(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10)
+/* timer count register */
+#define GPTU_CNT(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18)
+
+/* GPTU_CON(x) */
+#define CON_CNT BIT(2)
+#define CON_EDGE_ANY (BIT(7) | BIT(6))
+#define CON_SYNC BIT(8)
+#define CON_CLK_INT BIT(10)
+
+/* GPTU_RUN(x) */
+#define RUN_SEN BIT(0)
+#define RUN_RL BIT(2)
+
+/* set clock to runmode */
+#define CLC_RMC BIT(8)
+/* bring core out of suspend */
+#define CLC_SUSPEND BIT(4)
+/* the disable bit */
+#define CLC_DISABLE BIT(0)
+
+#define gptu_w32(x, y) ltq_w32((x), gptu_membase + (y))
+#define gptu_r32(x) ltq_r32(gptu_membase + (x))
+
+enum gptu_timer {
+ TIMER1A = 0,
+ TIMER1B,
+ TIMER2A,
+ TIMER2B,
+ TIMER3A,
+ TIMER3B
+};
+
+static void __iomem *gptu_membase;
+static struct resource irqres[6];
+
+static irqreturn_t timer_irq_handler(int irq, void *priv)
+{
+ int timer = irq - irqres[0].start;
+ gptu_w32(1 << timer, GPTU_IRNCR);
+ return IRQ_HANDLED;
+}
+
+static void gptu_hwinit(void)
+{
+ gptu_w32(0x00, GPTU_IRNEN);
+ gptu_w32(0xff, GPTU_IRNCR);
+ gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC);
+}
+
+static void gptu_hwexit(void)
+{
+ gptu_w32(0x00, GPTU_IRNEN);
+ gptu_w32(0xff, GPTU_IRNCR);
+ gptu_w32(CLC_DISABLE, GPTU_CLC);
+}
+
+static int gptu_enable(struct clk *clk)
+{
+ int ret = request_irq(irqres[clk->bits].start, timer_irq_handler,
+ IRQF_TIMER, "gtpu", NULL);
+ if (ret) {
+ pr_err("gptu: failed to request irq\n");
+ return ret;
+ }
+
+ gptu_w32(CON_CNT | CON_EDGE_ANY | CON_SYNC | CON_CLK_INT,
+ GPTU_CON(clk->bits));
+ gptu_w32(1, GPTU_RLD(clk->bits));
+ gptu_w32(gptu_r32(GPTU_IRNEN) | BIT(clk->bits), GPTU_IRNEN);
+ gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits));
+ return 0;
+}
+
+static void gptu_disable(struct clk *clk)
+{
+ gptu_w32(0, GPTU_RUN(clk->bits));
+ gptu_w32(0, GPTU_CON(clk->bits));
+ gptu_w32(0, GPTU_RLD(clk->bits));
+ gptu_w32(gptu_r32(GPTU_IRNEN) & ~BIT(clk->bits), GPTU_IRNEN);
+ free_irq(irqres[clk->bits].start, NULL);
+}
+
+static inline void clkdev_add_gptu(struct device *dev, const char *con,
+ unsigned int timer)
+{
+ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+ clk->cl.dev_id = dev_name(dev);
+ clk->cl.con_id = con;
+ clk->cl.clk = clk;
+ clk->enable = gptu_enable;
+ clk->disable = gptu_disable;
+ clk->bits = timer;
+ clkdev_add(&clk->cl);
+}
+
+static int __devinit gptu_probe(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct resource *res;
+
+ if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 6) != 6) {
+ dev_err(&pdev->dev, "Failed to get IRQ list\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get resource\n");
+ return -ENOMEM;
+ }
+
+ /* remap gptu register range */
+ gptu_membase = devm_request_and_ioremap(&pdev->dev, res);
+ if (!gptu_membase) {
+ dev_err(&pdev->dev, "Failed to remap resource\n");
+ return -ENOMEM;
+ }
+
+ /* enable our clock */
+ clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Failed to get clock\n");
+ return -ENOENT;
+ }
+ clk_enable(clk);
+
+ /* power up the core */
+ gptu_hwinit();
+
+ /* the gptu has a ID register */
+ if (((gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) {
+ dev_err(&pdev->dev, "Failed to find magic\n");
+ gptu_hwexit();
+ return -ENAVAIL;
+ }
+
+ /* register the clocks */
+ clkdev_add_gptu(&pdev->dev, "timer1a", TIMER1A);
+ clkdev_add_gptu(&pdev->dev, "timer1b", TIMER1B);
+ clkdev_add_gptu(&pdev->dev, "timer2a", TIMER2A);
+ clkdev_add_gptu(&pdev->dev, "timer2b", TIMER2B);
+ clkdev_add_gptu(&pdev->dev, "timer3a", TIMER3A);
+ clkdev_add_gptu(&pdev->dev, "timer3b", TIMER3B);
+
+ dev_info(&pdev->dev, "gptu: 6 timers loaded\n");
+
+ return 0;
+}
+
+static const struct of_device_id gptu_match[] = {
+ { .compatible = "lantiq,gptu-xway" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dma_match);
+
+static struct platform_driver dma_driver = {
+ .probe = gptu_probe,
+ .driver = {
+ .name = "gptu-xway",
+ .owner = THIS_MODULE,
+ .of_match_table = gptu_match,
+ },
+};
+
+int __init gptu_init(void)
+{
+ int ret = platform_driver_register(&dma_driver);
+
+ if (ret)
+ pr_info("gptu: Error registering platform driver\n");
+ return ret;
+}
+
+arch_initcall(gptu_init);
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index befbb760ab76..67c3a91e54e7 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -145,7 +145,8 @@ static int pci_enable(struct clk *clk)
{
unsigned int val = ltq_cgu_r32(ifccr);
/* set bus clock speed */
- if (of_machine_is_compatible("lantiq,ar9")) {
+ if (of_machine_is_compatible("lantiq,ar9") ||
+ of_machine_is_compatible("lantiq,vr9")) {
val &= ~0x1f00000;
if (clk->rate == CLOCK_33M)
val |= 0xe00000;
diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
index e35096bf3cfb..8bead0bb6459 100644
--- a/drivers/gpio/gpio-stp-xway.c
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -82,7 +82,7 @@ struct xway_stp {
struct gpio_chip gc;
void __iomem *virt;
u32 edge; /* rising or falling edge triggered shift register */
- u16 shadow; /* shadow the shift registers state */
+ u32 shadow; /* shadow the shift registers state */
u8 groups; /* we can drive 1-3 groups of 8bit each */
u8 dsl; /* the 2 LSBs can be driven by the dsl core */
u8 phy1; /* 3 bits can be driven by phy1 */
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 54e3588bef62..45d2158a5374 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -55,10 +55,21 @@ config PINCTRL_IMX6Q
help
Say Y here to enable the imx6q pinctrl driver
+config PINCTRL_LANTIQ
+ bool
+ depends on LANTIQ
+ select PINMUX
+ select PINCONF
+
config PINCTRL_PXA3xx
bool
select PINMUX
+config PINCTRL_FALCON
+ bool
+ depends on SOC_FALCON
+ depends on PINCTRL_LANTIQ
+
config PINCTRL_MMP2
bool "MMP2 pin controller driver"
depends on ARCH_MMP
@@ -147,6 +158,11 @@ config PINCTRL_COH901
source "drivers/pinctrl/spear/Kconfig"
+config PINCTRL_XWAY
+ bool
+ depends on SOC_TYPE_XWAY
+ depends on PINCTRL_LANTIQ
+
endmenu
endif
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f40b1f81ff2c..c0566c84d7f0 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_PINCTRL_IMX51) += pinctrl-imx51.o
obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o
obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o
obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o
+obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o
obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o
obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o
@@ -29,5 +30,7 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o
obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
+obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
+obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c
new file mode 100644
index 000000000000..ee7305903470
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-falcon.c
@@ -0,0 +1,468 @@
+/*
+ * linux/drivers/pinctrl/pinmux-falcon.c
+ * based on linux/drivers/pinctrl/pinmux-pxa910.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-lantiq.h"
+
+#include <lantiq_soc.h>
+
+/* Multiplexer Control Register */
+#define LTQ_PADC_MUX(x) (x * 0x4)
+/* Pull Up Enable Register */
+#define LTQ_PADC_PUEN 0x80
+/* Pull Down Enable Register */
+#define LTQ_PADC_PDEN 0x84
+/* Slew Rate Control Register */
+#define LTQ_PADC_SRC 0x88
+/* Drive Current Control Register */
+#define LTQ_PADC_DCC 0x8C
+/* Pad Control Availability Register */
+#define LTQ_PADC_AVAIL 0xF0
+
+#define pad_r32(p, reg) ltq_r32(p + reg)
+#define pad_w32(p, val, reg) ltq_w32(val, p + reg)
+#define pad_w32_mask(c, clear, set, reg) \
+ pad_w32(c, (pad_r32(c, reg) & ~(clear)) | (set), reg)
+
+#define pad_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p)))
+
+#define PORTS 5
+#define PINS 32
+#define PORT(x) (x / PINS)
+#define PORT_PIN(x) (x % PINS)
+
+#define MFP_FALCON(a, f0, f1, f2, f3) \
+{ \
+ .name = #a, \
+ .pin = a, \
+ .func = { \
+ FALCON_MUX_##f0, \
+ FALCON_MUX_##f1, \
+ FALCON_MUX_##f2, \
+ FALCON_MUX_##f3, \
+ }, \
+}
+
+#define GRP_MUX(a, m, p) \
+{ \
+ .name = a, \
+ .mux = FALCON_MUX_##m, \
+ .pins = p, \
+ .npins = ARRAY_SIZE(p), \
+}
+
+enum falcon_mux {
+ FALCON_MUX_GPIO = 0,
+ FALCON_MUX_RST,
+ FALCON_MUX_NTR,
+ FALCON_MUX_MDIO,
+ FALCON_MUX_LED,
+ FALCON_MUX_SPI,
+ FALCON_MUX_ASC,
+ FALCON_MUX_I2C,
+ FALCON_MUX_HOSTIF,
+ FALCON_MUX_SLIC,
+ FALCON_MUX_JTAG,
+ FALCON_MUX_PCM,
+ FALCON_MUX_MII,
+ FALCON_MUX_PHY,
+ FALCON_MUX_NONE = 0xffff,
+};
+
+static struct pinctrl_pin_desc falcon_pads[PORTS * PINS];
+static int pad_count[PORTS];
+
+static void lantiq_load_pin_desc(struct pinctrl_pin_desc *d, int bank, int len)
+{
+ int base = bank * PINS;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ /* strlen("ioXYZ") + 1 = 6 */
+ char *name = kzalloc(6, GFP_KERNEL);
+ snprintf(name, 6, "io%d", base + i);
+ d[i].number = base + i;
+ d[i].name = name;
+ }
+ pad_count[bank] = len;
+}
+
+static struct ltq_mfp_pin falcon_mfp[] = {
+ /* pin f0 f1 f2 f3 */
+ MFP_FALCON(GPIO0, RST, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO1, GPIO, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO2, GPIO, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO3, GPIO, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO4, NTR, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO5, NTR, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO6, RST, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO7, MDIO, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO8, MDIO, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO9, LED, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO10, LED, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO11, LED, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO12, LED, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO13, LED, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO14, LED, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO32, ASC, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO33, ASC, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO34, SPI, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO35, SPI, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO36, SPI, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO37, SPI, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO38, SPI, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO39, I2C, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO40, I2C, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO41, HOSTIF, GPIO, HOSTIF, JTAG),
+ MFP_FALCON(GPIO42, HOSTIF, GPIO, HOSTIF, NONE),
+ MFP_FALCON(GPIO43, SLIC, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO44, SLIC, GPIO, PCM, ASC),
+ MFP_FALCON(GPIO45, SLIC, GPIO, PCM, ASC),
+ MFP_FALCON(GPIO64, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO65, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO66, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO67, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO68, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO69, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO70, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO71, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO72, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO73, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO74, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO75, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO76, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO77, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO78, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO79, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO80, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO81, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO82, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO83, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO84, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO85, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO86, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO87, MII, GPIO, NONE, NONE),
+ MFP_FALCON(GPIO88, PHY, GPIO, NONE, NONE),
+};
+
+static const unsigned pins_por[] = {GPIO0};
+static const unsigned pins_ntr[] = {GPIO4};
+static const unsigned pins_ntr8k[] = {GPIO5};
+static const unsigned pins_hrst[] = {GPIO6};
+static const unsigned pins_mdio[] = {GPIO7, GPIO8};
+static const unsigned pins_bled[] = {GPIO7, GPIO10, GPIO11,
+ GPIO12, GPIO13, GPIO14};
+static const unsigned pins_asc0[] = {GPIO32, GPIO33};
+static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36};
+static const unsigned pins_spi_cs0[] = {GPIO37};
+static const unsigned pins_spi_cs1[] = {GPIO38};
+static const unsigned pins_i2c[] = {GPIO39, GPIO40};
+static const unsigned pins_jtag[] = {GPIO41};
+static const unsigned pins_slic[] = {GPIO43, GPIO44, GPIO45};
+static const unsigned pins_pcm[] = {GPIO44, GPIO45};
+static const unsigned pins_asc1[] = {GPIO44, GPIO45};
+
+static struct ltq_pin_group falcon_grps[] = {
+ GRP_MUX("por", RST, pins_por),
+ GRP_MUX("ntr", NTR, pins_ntr),
+ GRP_MUX("ntr8k", NTR, pins_ntr8k),
+ GRP_MUX("hrst", RST, pins_hrst),
+ GRP_MUX("mdio", MDIO, pins_mdio),
+ GRP_MUX("bootled", LED, pins_bled),
+ GRP_MUX("asc0", ASC, pins_asc0),
+ GRP_MUX("spi", SPI, pins_spi),
+ GRP_MUX("spi cs0", SPI, pins_spi_cs0),
+ GRP_MUX("spi cs1", SPI, pins_spi_cs1),
+ GRP_MUX("i2c", I2C, pins_i2c),
+ GRP_MUX("jtag", JTAG, pins_jtag),
+ GRP_MUX("slic", SLIC, pins_slic),
+ GRP_MUX("pcm", PCM, pins_pcm),
+ GRP_MUX("asc1", ASC, pins_asc1),
+};
+
+static const char * const ltq_rst_grps[] = {"por", "hrst"};
+static const char * const ltq_ntr_grps[] = {"ntr", "ntr8k"};
+static const char * const ltq_mdio_grps[] = {"mdio"};
+static const char * const ltq_bled_grps[] = {"bootled"};
+static const char * const ltq_asc_grps[] = {"asc0", "asc1"};
+static const char * const ltq_spi_grps[] = {"spi", "spi cs0", "spi cs1"};
+static const char * const ltq_i2c_grps[] = {"i2c"};
+static const char * const ltq_jtag_grps[] = {"jtag"};
+static const char * const ltq_slic_grps[] = {"slic"};
+static const char * const ltq_pcm_grps[] = {"pcm"};
+
+static struct ltq_pmx_func falcon_funcs[] = {
+ {"rst", ARRAY_AND_SIZE(ltq_rst_grps)},
+ {"ntr", ARRAY_AND_SIZE(ltq_ntr_grps)},
+ {"mdio", ARRAY_AND_SIZE(ltq_mdio_grps)},
+ {"led", ARRAY_AND_SIZE(ltq_bled_grps)},
+ {"asc", ARRAY_AND_SIZE(ltq_asc_grps)},
+ {"spi", ARRAY_AND_SIZE(ltq_spi_grps)},
+ {"i2c", ARRAY_AND_SIZE(ltq_i2c_grps)},
+ {"jtag", ARRAY_AND_SIZE(ltq_jtag_grps)},
+ {"slic", ARRAY_AND_SIZE(ltq_slic_grps)},
+ {"pcm", ARRAY_AND_SIZE(ltq_pcm_grps)},
+};
+
+
+
+
+/* --------- pinconf related code --------- */
+static int falcon_pinconf_group_get(struct pinctrl_dev *pctrldev,
+ unsigned group, unsigned long *config)
+{
+ return -ENOTSUPP;
+}
+
+static int falcon_pinconf_group_set(struct pinctrl_dev *pctrldev,
+ unsigned group, unsigned long config)
+{
+ return -ENOTSUPP;
+}
+
+static int falcon_pinconf_get(struct pinctrl_dev *pctrldev,
+ unsigned pin, unsigned long *config)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config);
+ void __iomem *mem = info->membase[PORT(pin)];
+
+ switch (param) {
+ case LTQ_PINCONF_PARAM_DRIVE_CURRENT:
+ *config = LTQ_PINCONF_PACK(param,
+ !!pad_getbit(mem, LTQ_PADC_DCC, PORT_PIN(pin)));
+ break;
+
+ case LTQ_PINCONF_PARAM_SLEW_RATE:
+ *config = LTQ_PINCONF_PACK(param,
+ !!pad_getbit(mem, LTQ_PADC_SRC, PORT_PIN(pin)));
+ break;
+
+ case LTQ_PINCONF_PARAM_PULL:
+ if (pad_getbit(mem, LTQ_PADC_PDEN, PORT_PIN(pin)))
+ *config = LTQ_PINCONF_PACK(param, 1);
+ else if (pad_getbit(mem, LTQ_PADC_PUEN, PORT_PIN(pin)))
+ *config = LTQ_PINCONF_PACK(param, 2);
+ else
+ *config = LTQ_PINCONF_PACK(param, 0);
+
+ break;
+
+ default:
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int falcon_pinconf_set(struct pinctrl_dev *pctrldev,
+ unsigned pin, unsigned long config)
+{
+ enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config);
+ int arg = LTQ_PINCONF_UNPACK_ARG(config);
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ void __iomem *mem = info->membase[PORT(pin)];
+ u32 reg;
+
+ switch (param) {
+ case LTQ_PINCONF_PARAM_DRIVE_CURRENT:
+ reg = LTQ_PADC_DCC;
+ break;
+
+ case LTQ_PINCONF_PARAM_SLEW_RATE:
+ reg = LTQ_PADC_SRC;
+ break;
+
+ case LTQ_PINCONF_PARAM_PULL:
+ if (arg == 1)
+ reg = LTQ_PADC_PDEN;
+ else
+ reg = LTQ_PADC_PUEN;
+ break;
+
+ default:
+ pr_err("%s: Invalid config param %04x\n",
+ pinctrl_dev_get_name(pctrldev), param);
+ return -ENOTSUPP;
+ }
+
+ pad_w32(mem, BIT(PORT_PIN(pin)), reg);
+ if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin))))
+ return -ENOTSUPP;
+ return 0;
+}
+
+static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev,
+ struct seq_file *s, unsigned offset)
+{
+}
+
+static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev,
+ struct seq_file *s, unsigned selector)
+{
+}
+
+struct pinconf_ops falcon_pinconf_ops = {
+ .pin_config_get = falcon_pinconf_get,
+ .pin_config_set = falcon_pinconf_set,
+ .pin_config_group_get = falcon_pinconf_group_get,
+ .pin_config_group_set = falcon_pinconf_group_set,
+ .pin_config_dbg_show = falcon_pinconf_dbg_show,
+ .pin_config_group_dbg_show = falcon_pinconf_group_dbg_show,
+};
+
+static struct pinctrl_desc falcon_pctrl_desc = {
+ .owner = THIS_MODULE,
+ .pins = falcon_pads,
+ .confops = &falcon_pinconf_ops,
+};
+
+static inline int falcon_mux_apply(struct pinctrl_dev *pctrldev,
+ int mfp, int mux)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ int port = PORT(info->mfp[mfp].pin);
+
+ if ((port >= PORTS) || (!info->membase[port]))
+ return -ENODEV;
+
+ pad_w32(info->membase[port], mux,
+ LTQ_PADC_MUX(PORT_PIN(info->mfp[mfp].pin)));
+ return 0;
+}
+
+static const struct ltq_cfg_param falcon_cfg_params[] = {
+ {"lantiq,pull", LTQ_PINCONF_PARAM_PULL},
+ {"lantiq,drive-current", LTQ_PINCONF_PARAM_DRIVE_CURRENT},
+ {"lantiq,slew-rate", LTQ_PINCONF_PARAM_SLEW_RATE},
+};
+
+static struct ltq_pinmux_info falcon_info = {
+ .desc = &falcon_pctrl_desc,
+ .apply_mux = falcon_mux_apply,
+};
+
+
+
+
+/* --------- register the pinctrl layer --------- */
+
+int pinctrl_falcon_get_range_size(int id)
+{
+ u32 avail;
+
+ if ((id >= PORTS) || (!falcon_info.membase[id]))
+ return -EINVAL;
+
+ avail = pad_r32(falcon_info.membase[id], LTQ_PADC_AVAIL);
+
+ return fls(avail);
+}
+
+void pinctrl_falcon_add_gpio_range(struct pinctrl_gpio_range *range)
+{
+ pinctrl_add_gpio_range(falcon_info.pctrl, range);
+}
+
+static int pinctrl_falcon_probe(struct platform_device *pdev)
+{
+ struct device_node *np;
+ int pad_count = 0;
+ int ret = 0;
+
+ /* load and remap the pad resources of the different banks */
+ for_each_compatible_node(np, NULL, "lantiq,pad-falcon") {
+ struct platform_device *ppdev = of_find_device_by_node(np);
+ const __be32 *bank = of_get_property(np, "lantiq,bank", NULL);
+ struct resource res;
+ u32 avail;
+ int pins;
+
+ if (!ppdev) {
+ dev_err(&pdev->dev, "failed to find pad pdev\n");
+ continue;
+ }
+ if (!bank || *bank >= PORTS)
+ continue;
+ if (of_address_to_resource(np, 0, &res))
+ continue;
+ falcon_info.clk[*bank] = clk_get(&ppdev->dev, NULL);
+ if (IS_ERR(falcon_info.clk[*bank])) {
+ dev_err(&ppdev->dev, "failed to get clock\n");
+ return PTR_ERR(falcon_info.clk[*bank]);
+ }
+ falcon_info.membase[*bank] =
+ devm_request_and_ioremap(&pdev->dev, &res);
+ if (!falcon_info.membase[*bank]) {
+ dev_err(&pdev->dev,
+ "Failed to remap memory for bank %d\n",
+ *bank);
+ return -ENOMEM;
+ }
+ avail = pad_r32(falcon_info.membase[*bank],
+ LTQ_PADC_AVAIL);
+ pins = fls(avail);
+ lantiq_load_pin_desc(&falcon_pads[pad_count], *bank, pins);
+ pad_count += pins;
+ clk_enable(falcon_info.clk[*bank]);
+ dev_dbg(&pdev->dev, "found %s with %d pads\n",
+ res.name, pins);
+ }
+ dev_dbg(&pdev->dev, "found a total of %d pads\n", pad_count);
+ falcon_pctrl_desc.name = dev_name(&pdev->dev);
+ falcon_pctrl_desc.npins = pad_count;
+
+ falcon_info.mfp = falcon_mfp;
+ falcon_info.num_mfp = ARRAY_SIZE(falcon_mfp);
+ falcon_info.grps = falcon_grps;
+ falcon_info.num_grps = ARRAY_SIZE(falcon_grps);
+ falcon_info.funcs = falcon_funcs;
+ falcon_info.num_funcs = ARRAY_SIZE(falcon_funcs);
+
+ ret = ltq_pinctrl_register(pdev, &falcon_info);
+ if (!ret)
+ dev_info(&pdev->dev, "Init done\n");
+ return ret;
+}
+
+static const struct of_device_id falcon_match[] = {
+ { .compatible = "lantiq,pinctrl-falcon" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, falcon_match);
+
+static struct platform_driver pinctrl_falcon_driver = {
+ .probe = pinctrl_falcon_probe,
+ .driver = {
+ .name = "pinctrl-falcon",
+ .owner = THIS_MODULE,
+ .of_match_table = falcon_match,
+ },
+};
+
+int __init pinctrl_falcon_init(void)
+{
+ return platform_driver_register(&pinctrl_falcon_driver);
+}
+
+core_initcall_sync(pinctrl_falcon_init);
diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c
new file mode 100644
index 000000000000..07ba7682cf22
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-lantiq.c
@@ -0,0 +1,342 @@
+/*
+ * linux/drivers/pinctrl/pinctrl-lantiq.c
+ * based on linux/drivers/pinctrl/pinctrl-pxa3xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include "pinctrl-lantiq.h"
+
+static int ltq_get_group_count(struct pinctrl_dev *pctrldev)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ return info->num_grps;
+}
+
+static const char *ltq_get_group_name(struct pinctrl_dev *pctrldev,
+ unsigned selector)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ if (selector >= info->num_grps)
+ return NULL;
+ return info->grps[selector].name;
+}
+
+static int ltq_get_group_pins(struct pinctrl_dev *pctrldev,
+ unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ if (selector >= info->num_grps)
+ return -EINVAL;
+ *pins = info->grps[selector].pins;
+ *num_pins = info->grps[selector].npins;
+ return 0;
+}
+
+void ltq_pinctrl_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+ int i;
+
+ for (i = 0; i < num_maps; i++)
+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
+ kfree(map[i].data.configs.configs);
+ kfree(map);
+}
+
+static void ltq_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s,
+ unsigned offset)
+{
+ seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+
+static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
+ unsigned long configs[3];
+ unsigned num_configs = 0;
+ struct property *prop;
+ const char *group, *pin;
+ const char *function;
+ int ret, i;
+
+ ret = of_property_read_string(np, "lantiq,function", &function);
+ if (!ret) {
+ of_property_for_each_string(np, "lantiq,groups", prop, group) {
+ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
+ (*map)->name = function;
+ (*map)->data.mux.group = group;
+ (*map)->data.mux.function = function;
+ (*map)++;
+ }
+ if (of_find_property(np, "lantiq,pins", NULL))
+ dev_err(pctldev->dev,
+ "%s mixes pins and groups settings\n",
+ np->name);
+ return 0;
+ }
+
+ for (i = 0; i < info->num_params; i++) {
+ u32 val;
+ int ret = of_property_read_u32(np,
+ info->params[i].property, &val);
+ if (!ret)
+ configs[num_configs++] =
+ LTQ_PINCONF_PACK(info->params[i].param,
+ val);
+ }
+
+ if (!num_configs)
+ return -EINVAL;
+
+ of_property_for_each_string(np, "lantiq,pins", prop, pin) {
+ (*map)->data.configs.configs = kmemdup(configs,
+ num_configs * sizeof(unsigned long),
+ GFP_KERNEL);
+ (*map)->type = PIN_MAP_TYPE_CONFIGS_PIN;
+ (*map)->name = pin;
+ (*map)->data.configs.group_or_pin = pin;
+ (*map)->data.configs.num_configs = num_configs;
+ (*map)++;
+ }
+ return 0;
+}
+
+static int ltq_pinctrl_dt_subnode_size(struct device_node *np)
+{
+ int ret;
+
+ ret = of_property_count_strings(np, "lantiq,groups");
+ if (ret < 0)
+ ret = of_property_count_strings(np, "lantiq,pins");
+ return ret;
+}
+
+int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np_config,
+ struct pinctrl_map **map,
+ unsigned *num_maps)
+{
+ struct pinctrl_map *tmp;
+ struct device_node *np;
+ int ret;
+
+ *num_maps = 0;
+ for_each_child_of_node(np_config, np)
+ *num_maps += ltq_pinctrl_dt_subnode_size(np);
+ *map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
+ if (!*map)
+ return -ENOMEM;
+ tmp = *map;
+
+ for_each_child_of_node(np_config, np) {
+ ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp);
+ if (ret < 0) {
+ ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static struct pinctrl_ops ltq_pctrl_ops = {
+ .get_groups_count = ltq_get_group_count,
+ .get_group_name = ltq_get_group_name,
+ .get_group_pins = ltq_get_group_pins,
+ .pin_dbg_show = ltq_pinctrl_pin_dbg_show,
+ .dt_node_to_map = ltq_pinctrl_dt_node_to_map,
+ .dt_free_map = ltq_pinctrl_dt_free_map,
+};
+
+static int ltq_pmx_func_count(struct pinctrl_dev *pctrldev)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+
+ return info->num_funcs;
+}
+
+static const char *ltq_pmx_func_name(struct pinctrl_dev *pctrldev,
+ unsigned selector)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+
+ if (selector >= info->num_funcs)
+ return NULL;
+
+ return info->funcs[selector].name;
+}
+
+static int ltq_pmx_get_groups(struct pinctrl_dev *pctrldev,
+ unsigned func,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+
+ *groups = info->funcs[func].groups;
+ *num_groups = info->funcs[func].num_groups;
+
+ return 0;
+}
+
+/* Return function number. If failure, return negative value. */
+static int match_mux(const struct ltq_mfp_pin *mfp, unsigned mux)
+{
+ int i;
+ for (i = 0; i < LTQ_MAX_MUX; i++) {
+ if (mfp->func[i] == mux)
+ break;
+ }
+ if (i >= LTQ_MAX_MUX)
+ return -EINVAL;
+ return i;
+}
+
+/* dont assume .mfp is linearly mapped. find the mfp with the correct .pin */
+static int match_mfp(const struct ltq_pinmux_info *info, int pin)
+{
+ int i;
+ for (i = 0; i < info->num_mfp; i++) {
+ if (info->mfp[i].pin == pin)
+ return i;
+ }
+ return -1;
+}
+
+/* check whether current pin configuration is valid. Negative for failure */
+static int match_group_mux(const struct ltq_pin_group *grp,
+ const struct ltq_pinmux_info *info,
+ unsigned mux)
+{
+ int i, pin, ret = 0;
+ for (i = 0; i < grp->npins; i++) {
+ pin = match_mfp(info, grp->pins[i]);
+ if (pin < 0) {
+ dev_err(info->dev, "could not find mfp for pin %d\n",
+ grp->pins[i]);
+ return -EINVAL;
+ }
+ ret = match_mux(&info->mfp[pin], mux);
+ if (ret < 0) {
+ dev_err(info->dev, "Can't find mux %d on pin%d\n",
+ mux, pin);
+ break;
+ }
+ }
+ return ret;
+}
+
+static int ltq_pmx_enable(struct pinctrl_dev *pctrldev,
+ unsigned func,
+ unsigned group)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ const struct ltq_pin_group *pin_grp = &info->grps[group];
+ int i, pin, pin_func, ret;
+
+ if (!pin_grp->npins ||
+ (match_group_mux(pin_grp, info, pin_grp->mux) < 0)) {
+ dev_err(info->dev, "Failed to set the pin group: %s\n",
+ info->grps[group].name);
+ return -EINVAL;
+ }
+ for (i = 0; i < pin_grp->npins; i++) {
+ pin = match_mfp(info, pin_grp->pins[i]);
+ if (pin < 0) {
+ dev_err(info->dev, "could not find mfp for pin %d\n",
+ pin_grp->pins[i]);
+ return -EINVAL;
+ }
+ pin_func = match_mux(&info->mfp[pin], pin_grp->mux);
+ ret = info->apply_mux(pctrldev, pin, pin_func);
+ if (ret) {
+ dev_err(info->dev,
+ "failed to apply mux %d for pin %d\n",
+ pin_func, pin);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void ltq_pmx_disable(struct pinctrl_dev *pctrldev,
+ unsigned func,
+ unsigned group)
+{
+ /*
+ * Nothing to do here. However, pinconf_check_ops() requires this
+ * callback to be defined.
+ */
+}
+
+static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev,
+ struct pinctrl_gpio_range *range,
+ unsigned pin)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ int mfp = match_mfp(info, pin + (range->id * 32));
+ int pin_func;
+
+ if (mfp < 0) {
+ dev_err(info->dev, "could not find mfp for pin %d\n", pin);
+ return -EINVAL;
+ }
+
+ pin_func = match_mux(&info->mfp[mfp], 0);
+ if (pin_func < 0) {
+ dev_err(info->dev, "No GPIO function on pin%d\n", mfp);
+ return -EINVAL;
+ }
+
+ return info->apply_mux(pctrldev, mfp, pin_func);
+}
+
+static struct pinmux_ops ltq_pmx_ops = {
+ .get_functions_count = ltq_pmx_func_count,
+ .get_function_name = ltq_pmx_func_name,
+ .get_function_groups = ltq_pmx_get_groups,
+ .enable = ltq_pmx_enable,
+ .disable = ltq_pmx_disable,
+ .gpio_request_enable = ltq_pmx_gpio_request_enable,
+};
+
+/*
+ * allow different socs to register with the generic part of the lanti
+ * pinctrl code
+ */
+int ltq_pinctrl_register(struct platform_device *pdev,
+ struct ltq_pinmux_info *info)
+{
+ struct pinctrl_desc *desc;
+
+ if (!info)
+ return -EINVAL;
+ desc = info->desc;
+ desc->pctlops = &ltq_pctrl_ops;
+ desc->pmxops = &ltq_pmx_ops;
+ info->dev = &pdev->dev;
+
+ info->pctrl = pinctrl_register(desc, &pdev->dev, info);
+ if (!info->pctrl) {
+ dev_err(&pdev->dev, "failed to register LTQ pinmux driver\n");
+ return -EINVAL;
+ }
+ platform_set_drvdata(pdev, info);
+ return 0;
+}
diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h
new file mode 100644
index 000000000000..4419d32a0ade
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-lantiq.h
@@ -0,0 +1,194 @@
+/*
+ * linux/drivers/pinctrl/pinctrl-lantiq.h
+ * based on linux/drivers/pinctrl/pinctrl-pxa3xx.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef __PINCTRL_LANTIQ_H
+
+#include <linux/clkdev.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+
+#include "core.h"
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+#define LTQ_MAX_MUX 4
+#define MFPR_FUNC_MASK 0x3
+
+#define LTQ_PINCONF_PACK(param, arg) ((param) << 16 | (arg))
+#define LTQ_PINCONF_UNPACK_PARAM(conf) ((conf) >> 16)
+#define LTQ_PINCONF_UNPACK_ARG(conf) ((conf) & 0xffff)
+
+enum ltq_pinconf_param {
+ LTQ_PINCONF_PARAM_PULL,
+ LTQ_PINCONF_PARAM_OPEN_DRAIN,
+ LTQ_PINCONF_PARAM_DRIVE_CURRENT,
+ LTQ_PINCONF_PARAM_SLEW_RATE,
+};
+
+struct ltq_cfg_param {
+ const char *property;
+ enum ltq_pinconf_param param;
+};
+
+struct ltq_mfp_pin {
+ const char *name;
+ const unsigned int pin;
+ const unsigned short func[LTQ_MAX_MUX];
+};
+
+struct ltq_pin_group {
+ const char *name;
+ const unsigned mux;
+ const unsigned *pins;
+ const unsigned npins;
+};
+
+struct ltq_pmx_func {
+ const char *name;
+ const char * const *groups;
+ const unsigned num_groups;
+};
+
+struct ltq_pinmux_info {
+ struct device *dev;
+ struct pinctrl_dev *pctrl;
+
+ /* we need to manage up to 5 pad controllers */
+ void __iomem *membase[5];
+
+ /* the descriptor for the subsystem */
+ struct pinctrl_desc *desc;
+
+ /* we expose our pads to the subsystem */
+ struct pinctrl_pin_desc *pads;
+
+ /* the number of pads. this varies between socs */
+ unsigned int num_pads;
+
+ /* these are our multifunction pins */
+ const struct ltq_mfp_pin *mfp;
+ unsigned int num_mfp;
+
+ /* a number of multifunction pins can be grouped together */
+ const struct ltq_pin_group *grps;
+ unsigned int num_grps;
+
+ /* a mapping between function string and id */
+ const struct ltq_pmx_func *funcs;
+ unsigned int num_funcs;
+
+ /* the pinconf options that we are able to read from the DT */
+ const struct ltq_cfg_param *params;
+ unsigned int num_params;
+
+ /* the pad controller can have a irq mapping */
+ const unsigned *exin;
+ unsigned int num_exin;
+
+ /* we need 5 clocks max */
+ struct clk *clk[5];
+
+ /* soc specific callback used to apply muxing */
+ int (*apply_mux)(struct pinctrl_dev *pctrldev, int pin, int mux);
+};
+
+enum ltq_pin {
+ GPIO0 = 0,
+ GPIO1,
+ GPIO2,
+ GPIO3,
+ GPIO4,
+ GPIO5,
+ GPIO6,
+ GPIO7,
+ GPIO8,
+ GPIO9,
+ GPIO10, /* 10 */
+ GPIO11,
+ GPIO12,
+ GPIO13,
+ GPIO14,
+ GPIO15,
+ GPIO16,
+ GPIO17,
+ GPIO18,
+ GPIO19,
+ GPIO20, /* 20 */
+ GPIO21,
+ GPIO22,
+ GPIO23,
+ GPIO24,
+ GPIO25,
+ GPIO26,
+ GPIO27,
+ GPIO28,
+ GPIO29,
+ GPIO30, /* 30 */
+ GPIO31,
+ GPIO32,
+ GPIO33,
+ GPIO34,
+ GPIO35,
+ GPIO36,
+ GPIO37,
+ GPIO38,
+ GPIO39,
+ GPIO40, /* 40 */
+ GPIO41,
+ GPIO42,
+ GPIO43,
+ GPIO44,
+ GPIO45,
+ GPIO46,
+ GPIO47,
+ GPIO48,
+ GPIO49,
+ GPIO50, /* 50 */
+ GPIO51,
+ GPIO52,
+ GPIO53,
+ GPIO54,
+ GPIO55,
+
+ GPIO64,
+ GPIO65,
+ GPIO66,
+ GPIO67,
+ GPIO68,
+ GPIO69,
+ GPIO70,
+ GPIO71,
+ GPIO72,
+ GPIO73,
+ GPIO74,
+ GPIO75,
+ GPIO76,
+ GPIO77,
+ GPIO78,
+ GPIO79,
+ GPIO80,
+ GPIO81,
+ GPIO82,
+ GPIO83,
+ GPIO84,
+ GPIO85,
+ GPIO86,
+ GPIO87,
+ GPIO88,
+};
+
+extern int ltq_pinctrl_register(struct platform_device *pdev,
+ struct ltq_pinmux_info *info);
+extern int ltq_pinctrl_unregister(struct platform_device *pdev);
+#endif /* __PINCTRL_PXA3XX_H */
diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c
new file mode 100644
index 000000000000..f8d917d40c92
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-xway.c
@@ -0,0 +1,781 @@
+/*
+ * linux/drivers/pinctrl/pinmux-xway.c
+ * based on linux/drivers/pinctrl/pinmux-pxa910.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-lantiq.h"
+
+#include <lantiq_soc.h>
+
+/* we have 3 1/2 banks of 16 bit each */
+#define PINS 16
+#define PORT3 3
+#define PORT(x) (x / PINS)
+#define PORT_PIN(x) (x % PINS)
+
+/* we have 2 mux bits that can be set for each pin */
+#define MUX_ALT0 0x1
+#define MUX_ALT1 0x2
+
+/*
+ * each bank has this offset apart from the 1/2 bank that is mixed into the
+ * other 3 ranges
+ */
+#define REG_OFF 0x30
+
+/* these are the offsets to our registers */
+#define GPIO_BASE(p) (REG_OFF * PORT(p))
+#define GPIO_OUT(p) GPIO_BASE(p)
+#define GPIO_IN(p) (GPIO_BASE(p) + 0x04)
+#define GPIO_DIR(p) (GPIO_BASE(p) + 0x08)
+#define GPIO_ALT0(p) (GPIO_BASE(p) + 0x0C)
+#define GPIO_ALT1(p) (GPIO_BASE(p) + 0x10)
+#define GPIO_OD(p) (GPIO_BASE(p) + 0x14)
+#define GPIO_PUDSEL(p) (GPIO_BASE(p) + 0x1c)
+#define GPIO_PUDEN(p) (GPIO_BASE(p) + 0x20)
+
+/* the 1/2 port needs special offsets for some registers */
+#define GPIO3_OD (GPIO_BASE(0) + 0x24)
+#define GPIO3_PUDSEL (GPIO_BASE(0) + 0x28)
+#define GPIO3_PUDEN (GPIO_BASE(0) + 0x2C)
+#define GPIO3_ALT1 (GPIO_BASE(PINS) + 0x24)
+
+/* macros to help us access the registers */
+#define gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & BIT(p)))
+#define gpio_setbit(m, r, p) ltq_w32_mask(0, BIT(p), m + r)
+#define gpio_clearbit(m, r, p) ltq_w32_mask(BIT(p), 0, m + r)
+
+#define MFP_XWAY(a, f0, f1, f2, f3) \
+ { \
+ .name = #a, \
+ .pin = a, \
+ .func = { \
+ XWAY_MUX_##f0, \
+ XWAY_MUX_##f1, \
+ XWAY_MUX_##f2, \
+ XWAY_MUX_##f3, \
+ }, \
+ }
+
+#define GRP_MUX(a, m, p) \
+ { .name = a, .mux = XWAY_MUX_##m, .pins = p, .npins = ARRAY_SIZE(p), }
+
+#define FUNC_MUX(f, m) \
+ { .func = f, .mux = XWAY_MUX_##m, }
+
+#define XWAY_MAX_PIN 32
+#define XR9_MAX_PIN 56
+
+enum xway_mux {
+ XWAY_MUX_GPIO = 0,
+ XWAY_MUX_SPI,
+ XWAY_MUX_ASC,
+ XWAY_MUX_PCI,
+ XWAY_MUX_CGU,
+ XWAY_MUX_EBU,
+ XWAY_MUX_JTAG,
+ XWAY_MUX_EXIN,
+ XWAY_MUX_TDM,
+ XWAY_MUX_STP,
+ XWAY_MUX_SIN,
+ XWAY_MUX_GPT,
+ XWAY_MUX_NMI,
+ XWAY_MUX_MDIO,
+ XWAY_MUX_MII,
+ XWAY_MUX_EPHY,
+ XWAY_MUX_DFE,
+ XWAY_MUX_SDIO,
+ XWAY_MUX_NONE = 0xffff,
+};
+
+static const struct ltq_mfp_pin xway_mfp[] = {
+ /* pin f0 f1 f2 f3 */
+ MFP_XWAY(GPIO0, GPIO, EXIN, NONE, TDM),
+ MFP_XWAY(GPIO1, GPIO, EXIN, NONE, NONE),
+ MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE),
+ MFP_XWAY(GPIO3, GPIO, CGU, NONE, PCI),
+ MFP_XWAY(GPIO4, GPIO, STP, NONE, ASC),
+ MFP_XWAY(GPIO5, GPIO, STP, NONE, NONE),
+ MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC),
+ MFP_XWAY(GPIO7, GPIO, CGU, PCI, NONE),
+ MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE),
+ MFP_XWAY(GPIO9, GPIO, ASC, SPI, EXIN),
+ MFP_XWAY(GPIO10, GPIO, ASC, SPI, NONE),
+ MFP_XWAY(GPIO11, GPIO, ASC, PCI, SPI),
+ MFP_XWAY(GPIO12, GPIO, ASC, NONE, NONE),
+ MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE),
+ MFP_XWAY(GPIO14, GPIO, CGU, PCI, NONE),
+ MFP_XWAY(GPIO15, GPIO, SPI, JTAG, NONE),
+ MFP_XWAY(GPIO16, GPIO, SPI, NONE, JTAG),
+ MFP_XWAY(GPIO17, GPIO, SPI, NONE, JTAG),
+ MFP_XWAY(GPIO18, GPIO, SPI, NONE, JTAG),
+ MFP_XWAY(GPIO19, GPIO, PCI, NONE, NONE),
+ MFP_XWAY(GPIO20, GPIO, JTAG, NONE, NONE),
+ MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT),
+ MFP_XWAY(GPIO22, GPIO, SPI, NONE, NONE),
+ MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP),
+ MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI),
+ MFP_XWAY(GPIO25, GPIO, TDM, NONE, ASC),
+ MFP_XWAY(GPIO26, GPIO, EBU, NONE, TDM),
+ MFP_XWAY(GPIO27, GPIO, TDM, NONE, ASC),
+ MFP_XWAY(GPIO28, GPIO, GPT, NONE, NONE),
+ MFP_XWAY(GPIO29, GPIO, PCI, NONE, NONE),
+ MFP_XWAY(GPIO30, GPIO, PCI, NONE, NONE),
+ MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE),
+ MFP_XWAY(GPIO32, GPIO, NONE, NONE, EBU),
+ MFP_XWAY(GPIO33, GPIO, NONE, NONE, EBU),
+ MFP_XWAY(GPIO34, GPIO, NONE, NONE, EBU),
+ MFP_XWAY(GPIO35, GPIO, NONE, NONE, EBU),
+ MFP_XWAY(GPIO36, GPIO, SIN, NONE, EBU),
+ MFP_XWAY(GPIO37, GPIO, PCI, NONE, NONE),
+ MFP_XWAY(GPIO38, GPIO, PCI, NONE, NONE),
+ MFP_XWAY(GPIO39, GPIO, EXIN, NONE, NONE),
+ MFP_XWAY(GPIO40, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE),
+ MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE),
+ MFP_XWAY(GPIO44, GPIO, NONE, NONE, SIN),
+ MFP_XWAY(GPIO45, GPIO, NONE, NONE, SIN),
+ MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN),
+ MFP_XWAY(GPIO47, GPIO, NONE, NONE, SIN),
+ MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE),
+ MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE),
+ MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO51, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO52, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO53, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO54, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE),
+};
+
+static const struct ltq_mfp_pin ase_mfp[] = {
+ /* pin f0 f1 f2 f3 */
+ MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM),
+ MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU),
+ MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY),
+ MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU),
+ MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII),
+ MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT),
+ MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN),
+ MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG),
+ MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG),
+ MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG),
+ MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG),
+ MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG),
+ MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO),
+ MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU),
+ MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU),
+ MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO),
+ MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO),
+ MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO),
+ MFP_XWAY(GPIO21, GPIO, EBU, MII, SDIO),
+ MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU),
+ MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU),
+ MFP_XWAY(GPIO24, GPIO, EBU, NONE, MII),
+ MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT),
+ MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO),
+ MFP_XWAY(GPIO27, GPIO, EBU, NONE, MII),
+ MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO),
+ MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN),
+ MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE),
+ MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE),
+};
+
+static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35};
+static const unsigned pins_asc0[] = {GPIO11, GPIO12};
+static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10};
+static const unsigned pins_stp[] = {GPIO4, GPIO5, GPIO6};
+static const unsigned pins_nmi[] = {GPIO8};
+static const unsigned pins_mdio[] = {GPIO42, GPIO43};
+
+static const unsigned pins_ebu_a24[] = {GPIO13};
+static const unsigned pins_ebu_clk[] = {GPIO21};
+static const unsigned pins_ebu_cs1[] = {GPIO23};
+static const unsigned pins_ebu_a23[] = {GPIO24};
+static const unsigned pins_ebu_wait[] = {GPIO26};
+static const unsigned pins_ebu_a25[] = {GPIO31};
+static const unsigned pins_ebu_rdy[] = {GPIO48};
+static const unsigned pins_ebu_rd[] = {GPIO49};
+
+static const unsigned pins_nand_ale[] = {GPIO13};
+static const unsigned pins_nand_cs1[] = {GPIO23};
+static const unsigned pins_nand_cle[] = {GPIO24};
+static const unsigned pins_nand_rdy[] = {GPIO48};
+static const unsigned pins_nand_rd[] = {GPIO49};
+
+static const unsigned pins_exin0[] = {GPIO0};
+static const unsigned pins_exin1[] = {GPIO1};
+static const unsigned pins_exin2[] = {GPIO2};
+static const unsigned pins_exin3[] = {GPIO39};
+static const unsigned pins_exin4[] = {GPIO46};
+static const unsigned pins_exin5[] = {GPIO9};
+
+static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18};
+static const unsigned pins_spi_cs1[] = {GPIO15};
+static const unsigned pins_spi_cs2[] = {GPIO21};
+static const unsigned pins_spi_cs3[] = {GPIO13};
+static const unsigned pins_spi_cs4[] = {GPIO10};
+static const unsigned pins_spi_cs5[] = {GPIO9};
+static const unsigned pins_spi_cs6[] = {GPIO11};
+
+static const unsigned pins_gpt1[] = {GPIO28};
+static const unsigned pins_gpt2[] = {GPIO21};
+static const unsigned pins_gpt3[] = {GPIO6};
+
+static const unsigned pins_clkout0[] = {GPIO8};
+static const unsigned pins_clkout1[] = {GPIO7};
+static const unsigned pins_clkout2[] = {GPIO3};
+static const unsigned pins_clkout3[] = {GPIO2};
+
+static const unsigned pins_pci_gnt1[] = {GPIO30};
+static const unsigned pins_pci_gnt2[] = {GPIO23};
+static const unsigned pins_pci_gnt3[] = {GPIO19};
+static const unsigned pins_pci_gnt4[] = {GPIO38};
+static const unsigned pins_pci_req1[] = {GPIO29};
+static const unsigned pins_pci_req2[] = {GPIO31};
+static const unsigned pins_pci_req3[] = {GPIO3};
+static const unsigned pins_pci_req4[] = {GPIO37};
+
+static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11};
+static const unsigned ase_pins_asc[] = {GPIO5, GPIO6};
+static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3};
+static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4};
+static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2};
+
+static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10};
+static const unsigned ase_pins_spi_cs1[] = {GPIO7};
+static const unsigned ase_pins_spi_cs2[] = {GPIO15};
+static const unsigned ase_pins_spi_cs3[] = {GPIO14};
+
+static const unsigned ase_pins_exin0[] = {GPIO6};
+static const unsigned ase_pins_exin1[] = {GPIO29};
+static const unsigned ase_pins_exin2[] = {GPIO0};
+
+static const unsigned ase_pins_gpt1[] = {GPIO5};
+static const unsigned ase_pins_gpt2[] = {GPIO4};
+static const unsigned ase_pins_gpt3[] = {GPIO25};
+
+static const struct ltq_pin_group xway_grps[] = {
+ GRP_MUX("exin0", EXIN, pins_exin0),
+ GRP_MUX("exin1", EXIN, pins_exin1),
+ GRP_MUX("exin2", EXIN, pins_exin2),
+ GRP_MUX("jtag", JTAG, pins_jtag),
+ GRP_MUX("ebu a23", EBU, pins_ebu_a23),
+ GRP_MUX("ebu a24", EBU, pins_ebu_a24),
+ GRP_MUX("ebu a25", EBU, pins_ebu_a25),
+ GRP_MUX("ebu clk", EBU, pins_ebu_clk),
+ GRP_MUX("ebu cs1", EBU, pins_ebu_cs1),
+ GRP_MUX("ebu wait", EBU, pins_ebu_wait),
+ GRP_MUX("nand ale", EBU, pins_nand_ale),
+ GRP_MUX("nand cs1", EBU, pins_nand_cs1),
+ GRP_MUX("nand cle", EBU, pins_nand_cle),
+ GRP_MUX("spi", SPI, pins_spi),
+ GRP_MUX("spi_cs1", SPI, pins_spi_cs1),
+ GRP_MUX("spi_cs2", SPI, pins_spi_cs2),
+ GRP_MUX("spi_cs3", SPI, pins_spi_cs3),
+ GRP_MUX("spi_cs4", SPI, pins_spi_cs4),
+ GRP_MUX("spi_cs5", SPI, pins_spi_cs5),
+ GRP_MUX("spi_cs6", SPI, pins_spi_cs6),
+ GRP_MUX("asc0", ASC, pins_asc0),
+ GRP_MUX("asc0 cts rts", ASC, pins_asc0_cts_rts),
+ GRP_MUX("stp", STP, pins_stp),
+ GRP_MUX("nmi", NMI, pins_nmi),
+ GRP_MUX("gpt1", GPT, pins_gpt1),
+ GRP_MUX("gpt2", GPT, pins_gpt2),
+ GRP_MUX("gpt3", GPT, pins_gpt3),
+ GRP_MUX("clkout0", CGU, pins_clkout0),
+ GRP_MUX("clkout1", CGU, pins_clkout1),
+ GRP_MUX("clkout2", CGU, pins_clkout2),
+ GRP_MUX("clkout3", CGU, pins_clkout3),
+ GRP_MUX("gnt1", PCI, pins_pci_gnt1),
+ GRP_MUX("gnt2", PCI, pins_pci_gnt2),
+ GRP_MUX("gnt3", PCI, pins_pci_gnt3),
+ GRP_MUX("req1", PCI, pins_pci_req1),
+ GRP_MUX("req2", PCI, pins_pci_req2),
+ GRP_MUX("req3", PCI, pins_pci_req3),
+/* xrx only */
+ GRP_MUX("nand rdy", EBU, pins_nand_rdy),
+ GRP_MUX("nand rd", EBU, pins_nand_rd),
+ GRP_MUX("exin3", EXIN, pins_exin3),
+ GRP_MUX("exin4", EXIN, pins_exin4),
+ GRP_MUX("exin5", EXIN, pins_exin5),
+ GRP_MUX("gnt4", PCI, pins_pci_gnt4),
+ GRP_MUX("req4", PCI, pins_pci_gnt4),
+ GRP_MUX("mdio", MDIO, pins_mdio),
+};
+
+static const struct ltq_pin_group ase_grps[] = {
+ GRP_MUX("exin0", EXIN, ase_pins_exin0),
+ GRP_MUX("exin1", EXIN, ase_pins_exin1),
+ GRP_MUX("exin2", EXIN, ase_pins_exin2),
+ GRP_MUX("jtag", JTAG, ase_pins_jtag),
+ GRP_MUX("stp", STP, ase_pins_stp),
+ GRP_MUX("asc", ASC, ase_pins_asc),
+ GRP_MUX("gpt1", GPT, ase_pins_gpt1),
+ GRP_MUX("gpt2", GPT, ase_pins_gpt2),
+ GRP_MUX("gpt3", GPT, ase_pins_gpt3),
+ GRP_MUX("ephy", EPHY, ase_pins_ephy),
+ GRP_MUX("dfe", DFE, ase_pins_dfe),
+ GRP_MUX("spi", SPI, ase_pins_spi),
+ GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1),
+ GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2),
+ GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3),
+};
+
+static const char * const xway_pci_grps[] = {"gnt1", "gnt2",
+ "gnt3", "req1",
+ "req2", "req3"};
+static const char * const xway_spi_grps[] = {"spi", "spi_cs1",
+ "spi_cs2", "spi_cs3",
+ "spi_cs4", "spi_cs5",
+ "spi_cs6"};
+static const char * const xway_cgu_grps[] = {"clkout0", "clkout1",
+ "clkout2", "clkout3"};
+static const char * const xway_ebu_grps[] = {"ebu a23", "ebu a24",
+ "ebu a25", "ebu cs1",
+ "ebu wait", "ebu clk",
+ "nand ale", "nand cs1",
+ "nand cle"};
+static const char * const xway_exin_grps[] = {"exin0", "exin1", "exin2"};
+static const char * const xway_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
+static const char * const xway_asc_grps[] = {"asc0", "asc0 cts rts"};
+static const char * const xway_jtag_grps[] = {"jtag"};
+static const char * const xway_stp_grps[] = {"stp"};
+static const char * const xway_nmi_grps[] = {"nmi"};
+
+/* ar9/vr9/gr9 */
+static const char * const xrx_mdio_grps[] = {"mdio"};
+static const char * const xrx_ebu_grps[] = {"ebu a23", "ebu a24",
+ "ebu a25", "ebu cs1",
+ "ebu wait", "ebu clk",
+ "nand ale", "nand cs1",
+ "nand cle", "nand rdy",
+ "nand rd"};
+static const char * const xrx_exin_grps[] = {"exin0", "exin1", "exin2",
+ "exin3", "exin4", "exin5"};
+static const char * const xrx_pci_grps[] = {"gnt1", "gnt2",
+ "gnt3", "gnt4",
+ "req1", "req2",
+ "req3", "req4"};
+
+/* ase */
+static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"};
+static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
+static const char * const ase_dfe_grps[] = {"dfe"};
+static const char * const ase_ephy_grps[] = {"ephy"};
+static const char * const ase_asc_grps[] = {"asc"};
+static const char * const ase_jtag_grps[] = {"jtag"};
+static const char * const ase_stp_grps[] = {"stp"};
+static const char * const ase_spi_grps[] = {"spi", "spi_cs1",
+ "spi_cs2", "spi_cs3"};
+
+static const struct ltq_pmx_func danube_funcs[] = {
+ {"spi", ARRAY_AND_SIZE(xway_spi_grps)},
+ {"asc", ARRAY_AND_SIZE(xway_asc_grps)},
+ {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)},
+ {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)},
+ {"exin", ARRAY_AND_SIZE(xway_exin_grps)},
+ {"stp", ARRAY_AND_SIZE(xway_stp_grps)},
+ {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)},
+ {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)},
+ {"pci", ARRAY_AND_SIZE(xway_pci_grps)},
+ {"ebu", ARRAY_AND_SIZE(xway_ebu_grps)},
+};
+
+static const struct ltq_pmx_func xrx_funcs[] = {
+ {"spi", ARRAY_AND_SIZE(xway_spi_grps)},
+ {"asc", ARRAY_AND_SIZE(xway_asc_grps)},
+ {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)},
+ {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)},
+ {"exin", ARRAY_AND_SIZE(xrx_exin_grps)},
+ {"stp", ARRAY_AND_SIZE(xway_stp_grps)},
+ {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)},
+ {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)},
+ {"pci", ARRAY_AND_SIZE(xrx_pci_grps)},
+ {"ebu", ARRAY_AND_SIZE(xrx_ebu_grps)},
+ {"mdio", ARRAY_AND_SIZE(xrx_mdio_grps)},
+};
+
+static const struct ltq_pmx_func ase_funcs[] = {
+ {"spi", ARRAY_AND_SIZE(ase_spi_grps)},
+ {"asc", ARRAY_AND_SIZE(ase_asc_grps)},
+ {"jtag", ARRAY_AND_SIZE(ase_jtag_grps)},
+ {"exin", ARRAY_AND_SIZE(ase_exin_grps)},
+ {"stp", ARRAY_AND_SIZE(ase_stp_grps)},
+ {"gpt", ARRAY_AND_SIZE(ase_gpt_grps)},
+ {"ephy", ARRAY_AND_SIZE(ase_ephy_grps)},
+ {"dfe", ARRAY_AND_SIZE(ase_dfe_grps)},
+};
+
+/* --------- pinconf related code --------- */
+static int xway_pinconf_get(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *config)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
+ enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config);
+ int port = PORT(pin);
+ u32 reg;
+
+ switch (param) {
+ case LTQ_PINCONF_PARAM_OPEN_DRAIN:
+ if (port == PORT3)
+ reg = GPIO3_OD;
+ else
+ reg = GPIO_OD(port);
+ *config = LTQ_PINCONF_PACK(param,
+ !!gpio_getbit(info->membase[0], reg, PORT_PIN(port)));
+ break;
+
+ case LTQ_PINCONF_PARAM_PULL:
+ if (port == PORT3)
+ reg = GPIO3_PUDEN;
+ else
+ reg = GPIO_PUDEN(port);
+ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) {
+ *config = LTQ_PINCONF_PACK(param, 0);
+ break;
+ }
+
+ if (port == PORT3)
+ reg = GPIO3_PUDSEL;
+ else
+ reg = GPIO_PUDSEL(port);
+ if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port)))
+ *config = LTQ_PINCONF_PACK(param, 2);
+ else
+ *config = LTQ_PINCONF_PACK(param, 1);
+ break;
+
+ default:
+ dev_err(pctldev->dev, "Invalid config param %04x\n", param);
+ return -ENOTSUPP;
+ }
+ return 0;
+}
+
+static int xway_pinconf_set(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long config)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
+ enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config);
+ int arg = LTQ_PINCONF_UNPACK_ARG(config);
+ int port = PORT(pin);
+ u32 reg;
+
+ switch (param) {
+ case LTQ_PINCONF_PARAM_OPEN_DRAIN:
+ if (port == PORT3)
+ reg = GPIO3_OD;
+ else
+ reg = GPIO_OD(port);
+ gpio_setbit(info->membase[0], reg, PORT_PIN(port));
+ break;
+
+ case LTQ_PINCONF_PARAM_PULL:
+ if (port == PORT3)
+ reg = GPIO3_PUDEN;
+ else
+ reg = GPIO_PUDEN(port);
+ if (arg == 0) {
+ gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
+ break;
+ }
+ gpio_setbit(info->membase[0], reg, PORT_PIN(port));
+
+ if (port == PORT3)
+ reg = GPIO3_PUDSEL;
+ else
+ reg = GPIO_PUDSEL(port);
+ if (arg == 1)
+ gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
+ else if (arg == 2)
+ gpio_setbit(info->membase[0], reg, PORT_PIN(port));
+ else
+ dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
+ break;
+
+ default:
+ dev_err(pctldev->dev, "Invalid config param %04x\n", param);
+ return -ENOTSUPP;
+ }
+ return 0;
+}
+
+struct pinconf_ops xway_pinconf_ops = {
+ .pin_config_get = xway_pinconf_get,
+ .pin_config_set = xway_pinconf_set,
+};
+
+static struct pinctrl_desc xway_pctrl_desc = {
+ .owner = THIS_MODULE,
+ .confops = &xway_pinconf_ops,
+};
+
+static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
+ int pin, int mux)
+{
+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
+ int port = PORT(pin);
+ u32 alt1_reg = GPIO_ALT1(pin);
+
+ if (port == PORT3)
+ alt1_reg = GPIO3_ALT1;
+
+ if (mux & MUX_ALT0)
+ gpio_setbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin));
+ else
+ gpio_clearbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin));
+
+ if (mux & MUX_ALT1)
+ gpio_setbit(info->membase[0], alt1_reg, PORT_PIN(pin));
+ else
+ gpio_clearbit(info->membase[0], alt1_reg, PORT_PIN(pin));
+
+ return 0;
+}
+
+static const struct ltq_cfg_param xway_cfg_params[] = {
+ {"lantiq,pull", LTQ_PINCONF_PARAM_PULL},
+ {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN},
+};
+
+static struct ltq_pinmux_info xway_info = {
+ .desc = &xway_pctrl_desc,
+ .apply_mux = xway_mux_apply,
+ .params = xway_cfg_params,
+ .num_params = ARRAY_SIZE(xway_cfg_params),
+};
+
+/* --------- gpio_chip related code --------- */
+static void xway_gpio_set(struct gpio_chip *chip, unsigned int pin, int val)
+{
+ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
+
+ if (val)
+ gpio_setbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin));
+ else
+ gpio_clearbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin));
+}
+
+static int xway_gpio_get(struct gpio_chip *chip, unsigned int pin)
+{
+ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
+
+ return gpio_getbit(info->membase[0], GPIO_IN(pin), PORT_PIN(pin));
+}
+
+static int xway_gpio_dir_in(struct gpio_chip *chip, unsigned int pin)
+{
+ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
+
+ gpio_clearbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
+
+ return 0;
+}
+
+static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val)
+{
+ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev);
+
+ gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
+ xway_gpio_set(chip, pin, val);
+
+ return 0;
+}
+
+static int xway_gpio_req(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ return pinctrl_request_gpio(gpio);
+}
+
+static void xway_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ pinctrl_free_gpio(gpio);
+}
+
+static struct gpio_chip xway_chip = {
+ .label = "gpio-xway",
+ .direction_input = xway_gpio_dir_in,
+ .direction_output = xway_gpio_dir_out,
+ .get = xway_gpio_get,
+ .set = xway_gpio_set,
+ .request = xway_gpio_req,
+ .free = xway_gpio_free,
+ .base = -1,
+};
+
+
+/* --------- register the pinctrl layer --------- */
+static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9};
+static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0};
+
+static struct pinctrl_xway_soc {
+ int pin_count;
+ const struct ltq_mfp_pin *mfp;
+ const struct ltq_pin_group *grps;
+ unsigned int num_grps;
+ const struct ltq_pmx_func *funcs;
+ unsigned int num_funcs;
+ const unsigned *exin;
+ unsigned int num_exin;
+} soc_cfg[] = {
+ /* legacy xway */
+ {XWAY_MAX_PIN, xway_mfp,
+ xway_grps, ARRAY_SIZE(xway_grps),
+ danube_funcs, ARRAY_SIZE(danube_funcs),
+ xway_exin_pin_map, 3},
+ /* xway xr9 series */
+ {XR9_MAX_PIN, xway_mfp,
+ xway_grps, ARRAY_SIZE(xway_grps),
+ xrx_funcs, ARRAY_SIZE(xrx_funcs),
+ xway_exin_pin_map, 6},
+ /* xway ase series */
+ {XWAY_MAX_PIN, ase_mfp,
+ ase_grps, ARRAY_SIZE(ase_grps),
+ ase_funcs, ARRAY_SIZE(ase_funcs),
+ ase_exin_pins_map, 3},
+};
+
+static struct pinctrl_gpio_range xway_gpio_range = {
+ .name = "XWAY GPIO",
+ .gc = &xway_chip,
+};
+
+static const struct of_device_id xway_match[] = {
+ { .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]},
+ { .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]},
+ { .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]},
+ {},
+};
+MODULE_DEVICE_TABLE(of, xway_match);
+
+static int __devinit pinmux_xway_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ const struct pinctrl_xway_soc *xway_soc;
+ struct resource *res;
+ int ret, i;
+
+ /* get and remap our register range */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get resource\n");
+ return -ENOENT;
+ }
+ xway_info.membase[0] = devm_request_and_ioremap(&pdev->dev, res);
+ if (!xway_info.membase[0]) {
+ dev_err(&pdev->dev, "Failed to remap resource\n");
+ return -ENOMEM;
+ }
+
+ match = of_match_device(xway_match, &pdev->dev);
+ if (match)
+ xway_soc = (const struct pinctrl_xway_soc *) match->data;
+ else
+ xway_soc = &soc_cfg[0];
+
+ /* find out how many pads we have */
+ xway_chip.ngpio = xway_soc->pin_count;
+
+ /* load our pad descriptors */
+ xway_info.pads = devm_kzalloc(&pdev->dev,
+ sizeof(struct pinctrl_pin_desc) * xway_chip.ngpio,
+ GFP_KERNEL);
+ if (!xway_info.pads) {
+ dev_err(&pdev->dev, "Failed to allocate pads\n");
+ return -ENOMEM;
+ }
+ for (i = 0; i < xway_chip.ngpio; i++) {
+ /* strlen("ioXY") + 1 = 5 */
+ char *name = devm_kzalloc(&pdev->dev, 5, GFP_KERNEL);
+
+ if (!name) {
+ dev_err(&pdev->dev, "Failed to allocate pad name\n");
+ return -ENOMEM;
+ }
+ snprintf(name, 5, "io%d", i);
+ xway_info.pads[i].number = GPIO0 + i;
+ xway_info.pads[i].name = name;
+ }
+ xway_pctrl_desc.pins = xway_info.pads;
+
+ /* load the gpio chip */
+ xway_chip.dev = &pdev->dev;
+ of_gpiochip_add(&xway_chip);
+ ret = gpiochip_add(&xway_chip);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register gpio chip\n");
+ return ret;
+ }
+
+ /* setup the data needed by pinctrl */
+ xway_pctrl_desc.name = dev_name(&pdev->dev);
+ xway_pctrl_desc.npins = xway_chip.ngpio;
+
+ xway_info.num_pads = xway_chip.ngpio;
+ xway_info.num_mfp = xway_chip.ngpio;
+ xway_info.mfp = xway_soc->mfp;
+ xway_info.grps = xway_soc->grps;
+ xway_info.num_grps = xway_soc->num_grps;
+ xway_info.funcs = xway_soc->funcs;
+ xway_info.num_funcs = xway_soc->num_funcs;
+ xway_info.exin = xway_soc->exin;
+ xway_info.num_exin = xway_soc->num_exin;
+
+ /* register with the generic lantiq layer */
+ ret = ltq_pinctrl_register(pdev, &xway_info);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register pinctrl driver\n");
+ return ret;
+ }
+
+ /* finish with registering the gpio range in pinctrl */
+ xway_gpio_range.npins = xway_chip.ngpio;
+ xway_gpio_range.base = xway_chip.base;
+ pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range);
+ dev_info(&pdev->dev, "Init done\n");
+ return 0;
+}
+
+static struct platform_driver pinmux_xway_driver = {
+ .probe = pinmux_xway_probe,
+ .driver = {
+ .name = "pinctrl-xway",
+ .owner = THIS_MODULE,
+ .of_match_table = xway_match,
+ },
+};
+
+static int __init pinmux_xway_init(void)
+{
+ return platform_driver_register(&pinmux_xway_driver);
+}
+
+core_initcall_sync(pinmux_xway_init);