summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/omap/l3-noc.txt1
-rw-r--r--arch/arm/boot/dts/am437x-sk-evm.dts4
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15.dts11
-rw-r--r--arch/arm/boot/dts/dra7.dtsi10
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts4
-rw-r--r--arch/arm/boot/dts/omap3.dtsi2
-rw-r--r--arch/arm/boot/dts/omap5.dtsi2
-rw-r--r--arch/arm/configs/omap2plus_defconfig2
-rw-r--r--arch/arm/mach-omap2/prm-regbits-34xx.h1
-rw-r--r--arch/arm/mach-omap2/prm-regbits-44xx.h1
-rw-r--r--arch/arm/mach-omap2/vc.c12
-rw-r--r--arch/arm/mach-omap2/vc.h2
-rw-r--r--arch/arm/mach-omap2/vc3xxx_data.c1
-rw-r--r--arch/arm/mach-omap2/vc44xx_data.c1
-rw-r--r--drivers/bus/omap_l3_noc.c5
-rw-r--r--drivers/bus/omap_l3_noc.h54
16 files changed, 81 insertions, 32 deletions
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
index 974624ea68f6..161448da959d 100644
--- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -6,6 +6,7 @@ provided by Arteris.
Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
+ Should be "ti,omap5-l3-noc" for OMAP5 family
Should be "ti,dra7-l3-noc" for DRA7 family
Should be "ti,am4372-l3-noc" for AM43 family
- reg: Contains L3 register address range for each noc domain.
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 8ae29c955c11..c17097d2c167 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -49,7 +49,7 @@
pinctrl-0 = <&matrix_keypad_pins>;
debounce-delay-ms = <5>;
- col-scan-delay-us = <1500>;
+ col-scan-delay-us = <5>;
row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
&gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
@@ -473,7 +473,7 @@
interrupt-parent = <&gpio0>;
interrupts = <31 0>;
- wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <480>;
touchscreen-size-y = <272>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 15f198e4864d..7128fad991ac 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -18,6 +18,7 @@
aliases {
rtc0 = &mcp_rtc;
rtc1 = &tps659038_rtc;
+ rtc2 = &rtc;
};
memory {
@@ -83,7 +84,7 @@
gpio_fan: gpio_fan {
/* Based on 5v 500mA AFB02505HHB */
compatible = "gpio-fan";
- gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
#cooling-cells = <2>;
@@ -130,8 +131,8 @@
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
- 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
- 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+ 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+ 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
>;
};
@@ -455,7 +456,7 @@
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
+ interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;
@@ -478,7 +479,7 @@
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
- <&dra7_pmx_core 0x248>;
+ <&dra7_pmx_core 0x3f8>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_default>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5332b57b4950..f03a091cd076 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -911,7 +911,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
- <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+ <0x4ae06014 0x4>, <0x4a003b20 0xc>,
<0x4ae0c158 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -944,7 +944,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
- <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+ <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
<0x4a002470 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -977,7 +977,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
- <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+ <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
<0x4a00246c 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -1010,7 +1010,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
- <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+ <0x4ae06010 0x4>, <0x4a003b08 0xc>,
<0x4ae0c154 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -1203,7 +1203,7 @@
status = "disabled";
};
- rtc@48838000 {
+ rtc: rtc@48838000 {
compatible = "ti,am3352-rtc";
reg = <0x48838000 0x100>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index a29315833ecd..5c16145920ea 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -498,6 +498,8 @@
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <1>;
};
tlv320aic3x_aux: tlv320aic3x@19 {
@@ -509,6 +511,8 @@
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <2>;
};
tsl2563: tsl2563@29 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index d18a90f5eca3..69a40cfc1f29 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -456,6 +456,7 @@
};
mmu_isp: mmu@480bd400 {
+ #iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x480bd400 0x80>;
interrupts = <24>;
@@ -464,6 +465,7 @@
};
mmu_iva: mmu@5d000000 {
+ #iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x5d000000 0x80>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index efe5f737f39b..7d24ae0306b5 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -128,7 +128,7 @@
* hierarchy.
*/
ocp {
- compatible = "ti,omap4-l3-noc", "simple-bus";
+ compatible = "ti,omap5-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 9ff7b54b2a83..3743ca221d40 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXTCON=m
-CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_PALMAS=m
CONFIG_TI_EMIF=m
CONFIG_PWM=y
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index cbefbd7cfdb5..661d753df584 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -112,6 +112,7 @@
#define OMAP3430_VC_CMD_ONLP_SHIFT 16
#define OMAP3430_VC_CMD_RET_SHIFT 8
#define OMAP3430_VC_CMD_OFF_SHIFT 0
+#define OMAP3430_SREN_MASK (1 << 4)
#define OMAP3430_HSEN_MASK (1 << 3)
#define OMAP3430_MCODE_MASK (0x7 << 0)
#define OMAP3430_VALID_MASK (1 << 24)
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index b1c7a33e00e7..e794828dee55 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -35,6 +35,7 @@
#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1
#define OMAP4430_GLOBAL_WUEN_MASK (1 << 16)
#define OMAP4430_HSMCODE_MASK (0x7 << 0)
+#define OMAP4430_SRMODEEN_MASK (1 << 4)
#define OMAP4430_HSMODEEN_MASK (1 << 3)
#define OMAP4430_HSSCLL_SHIFT 24
#define OMAP4430_ICEPICK_RST_SHIFT 9
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index be9ef834fa81..076fd20d7e5a 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
* idle. And we can also scale voltages to zero for off-idle.
* Note that no actual voltage scaling during off-idle will
* happen unless the board specific twl4030 PMIC scripts are
- * loaded.
+ * loaded. See also omap_vc_i2c_init for comments regarding
+ * erratum i531.
*/
val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
@@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
return;
}
+ /*
+ * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
+ * erratum i531 "Extra Power Consumed When Repeated Start Operation
+ * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
+ * Otherwise I2C4 eventually leads into about 23mW extra power being
+ * consumed even during off idle using VMODE.
+ */
i2c_high_speed = voltdm->pmic->i2c_high_speed;
if (i2c_high_speed)
- voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+ voltdm->rmw(vc->common->i2c_cfg_clear_mask,
vc->common->i2c_cfg_hsen_mask,
vc->common->i2c_cfg_reg);
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index cdbdd78e755e..89b83b7ff3ec 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -34,6 +34,7 @@ struct voltagedomain;
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
* @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
* @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
* @i2c_mcode_mask: MCODE field mask for I2C config register
*
@@ -52,6 +53,7 @@ struct omap_vc_common {
u8 cmd_ret_shift;
u8 cmd_off_shift;
u8 i2c_cfg_reg;
+ u8 i2c_cfg_clear_mask;
u8 i2c_cfg_hsen_mask;
u8 i2c_mcode_mask;
};
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index 75bc4aa22b3a..71d74c9172c1 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = {
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
+ .i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
.i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
.i2c_mcode_mask = OMAP3430_MCODE_MASK,
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index 085e5d6a04fd..2abd5fa8a697 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = {
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+ .i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
.i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
};
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 11f7982cbdb3..ebee57d715d2 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -1,7 +1,7 @@
/*
* OMAP L3 Interconnect error handling driver
*
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* Sricharan <r.sricharan@ti.com>
*
@@ -233,7 +233,8 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
}
static const struct of_device_id l3_noc_match[] = {
- {.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
+ {.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data},
+ {.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data},
{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
{},
diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
index 95254585db86..73431f81da28 100644
--- a/drivers/bus/omap_l3_noc.h
+++ b/drivers/bus/omap_l3_noc.h
@@ -1,7 +1,7 @@
/*
* OMAP L3 Interconnect error handling driver header
*
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* sricharan <r.sricharan@ti.com>
*
@@ -175,16 +175,14 @@ static struct l3_flagmux_data omap_l3_flagmux_clk2 = {
};
-static struct l3_target_data omap_l3_target_data_clk3[] = {
- {0x0100, "EMUSS",},
- {0x0300, "DEBUG SOURCE",},
- {0x0, "HOST CLK3",},
+static struct l3_target_data omap4_l3_target_data_clk3[] = {
+ {0x0100, "DEBUGSS",},
};
-static struct l3_flagmux_data omap_l3_flagmux_clk3 = {
+static struct l3_flagmux_data omap4_l3_flagmux_clk3 = {
.offset = 0x0200,
- .l3_targ = omap_l3_target_data_clk3,
- .num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3),
+ .l3_targ = omap4_l3_target_data_clk3,
+ .num_targ_data = ARRAY_SIZE(omap4_l3_target_data_clk3),
};
static struct l3_masters_data omap_l3_masters[] = {
@@ -215,21 +213,49 @@ static struct l3_masters_data omap_l3_masters[] = {
{ 0x32, "USBHOSTFS"}
};
-static struct l3_flagmux_data *omap_l3_flagmux[] = {
+static struct l3_flagmux_data *omap4_l3_flagmux[] = {
&omap_l3_flagmux_clk1,
&omap_l3_flagmux_clk2,
- &omap_l3_flagmux_clk3,
+ &omap4_l3_flagmux_clk3,
};
-static const struct omap_l3 omap_l3_data = {
- .l3_flagmux = omap_l3_flagmux,
- .num_modules = ARRAY_SIZE(omap_l3_flagmux),
+static const struct omap_l3 omap4_l3_data = {
+ .l3_flagmux = omap4_l3_flagmux,
+ .num_modules = ARRAY_SIZE(omap4_l3_flagmux),
.l3_masters = omap_l3_masters,
.num_masters = ARRAY_SIZE(omap_l3_masters),
/* The 6 MSBs of register field used to distinguish initiator */
.mst_addr_mask = 0xFC,
};
+/* OMAP5 data */
+static struct l3_target_data omap5_l3_target_data_clk3[] = {
+ {0x0100, "L3INSTR",},
+ {0x0300, "DEBUGSS",},
+ {0x0, "HOSTCLK3",},
+};
+
+static struct l3_flagmux_data omap5_l3_flagmux_clk3 = {
+ .offset = 0x0200,
+ .l3_targ = omap5_l3_target_data_clk3,
+ .num_targ_data = ARRAY_SIZE(omap5_l3_target_data_clk3),
+};
+
+static struct l3_flagmux_data *omap5_l3_flagmux[] = {
+ &omap_l3_flagmux_clk1,
+ &omap_l3_flagmux_clk2,
+ &omap5_l3_flagmux_clk3,
+};
+
+static const struct omap_l3 omap5_l3_data = {
+ .l3_flagmux = omap5_l3_flagmux,
+ .num_modules = ARRAY_SIZE(omap5_l3_flagmux),
+ .l3_masters = omap_l3_masters,
+ .num_masters = ARRAY_SIZE(omap_l3_masters),
+ /* The 6 MSBs of register field used to distinguish initiator */
+ .mst_addr_mask = 0x7E0,
+};
+
/* DRA7 data */
static struct l3_target_data dra_l3_target_data_clk1[] = {
{0x2a00, "AES1",},
@@ -274,7 +300,7 @@ static struct l3_flagmux_data dra_l3_flagmux_clk1 = {
static struct l3_target_data dra_l3_target_data_clk2[] = {
{0x0, "HOST CLK1",},
- {0x0, "HOST CLK2",},
+ {0x800000, "HOST CLK2",},
{0xdead, L3_TARGET_NOT_SUPPORTED,},
{0x3400, "SHA2_2",},
{0x0900, "BB2D",},