diff options
| -rw-r--r-- | drivers/leds/leds-lp5521.c | 11 | ||||
| -rw-r--r-- | drivers/leds/leds-lp5523.c | 14 | ||||
| -rw-r--r-- | drivers/leds/leds-lp55xx-common.c | 9 | ||||
| -rw-r--r-- | drivers/leds/leds-lp8501.c | 8 | ||||
| -rw-r--r-- | include/linux/platform_data/leds-lp55xx.h | 3 |
5 files changed, 31 insertions, 14 deletions
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index a004af8e22c7..acd37d0f0e26 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -58,14 +58,11 @@ /* CONFIG register */ #define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ #define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ -#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ -#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ -#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ -#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ +#define LP5521_CP_MODE_MASK 0x18 /* Charge pump mode */ +#define LP5521_CP_MODE_SHIFT 3 #define LP5521_R_TO_BATT 0x04 /* R out: 0 = CP, 1 = Vbat */ #define LP5521_CLK_INT 0x01 /* Internal clock */ -#define LP5521_DEFAULT_CFG \ - (LP5521_PWM_HF | LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO) +#define LP5521_DEFAULT_CFG (LP5521_PWM_HF | LP5521_PWRSAVE_EN) /* Status */ #define LP5521_EXT_CLK_USED 0x08 @@ -310,6 +307,8 @@ static int lp5521_post_init_device(struct lp55xx_chip *chip) if (!lp55xx_is_extclk_used(chip)) val |= LP5521_CLK_INT; + val |= (chip->pdata->charge_pump_mode << LP5521_CP_MODE_SHIFT) & LP5521_CP_MODE_MASK; + ret = lp55xx_write(chip, LP5521_REG_CONFIG, val); if (ret) return ret; diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index 55da914b8e5c..a8df22938bdb 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -57,8 +57,11 @@ #define LP5523_AUTO_INC 0x40 #define LP5523_PWR_SAVE 0x20 #define LP5523_PWM_PWR_SAVE 0x04 -#define LP5523_CP_AUTO 0x18 +#define LP5523_CP_MODE_MASK 0x18 +#define LP5523_CP_MODE_SHIFT 3 #define LP5523_AUTO_CLK 0x02 +#define LP5523_DEFAULT_CONFIG \ + (LP5523_AUTO_INC | LP5523_PWR_SAVE | LP5523_AUTO_CLK | LP5523_PWM_PWR_SAVE) #define LP5523_EN_LEDTEST 0x80 #define LP5523_LEDTEST_DONE 0x80 @@ -125,6 +128,7 @@ static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current) static int lp5523_post_init_device(struct lp55xx_chip *chip) { int ret; + int val; ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE); if (ret) @@ -133,10 +137,10 @@ static int lp5523_post_init_device(struct lp55xx_chip *chip) /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ usleep_range(1000, 2000); - ret = lp55xx_write(chip, LP5523_REG_CONFIG, - LP5523_AUTO_INC | LP5523_PWR_SAVE | - LP5523_CP_AUTO | LP5523_AUTO_CLK | - LP5523_PWM_PWR_SAVE); + val = LP5523_DEFAULT_CONFIG; + val |= (chip->pdata->charge_pump_mode << LP5523_CP_MODE_SHIFT) & LP5523_CP_MODE_MASK; + + ret = lp55xx_write(chip, LP5523_REG_CONFIG, val); if (ret) return ret; diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c index c1940964067a..77bb26906ea6 100644 --- a/drivers/leds/leds-lp55xx-common.c +++ b/drivers/leds/leds-lp55xx-common.c @@ -18,6 +18,7 @@ #include <linux/platform_data/leds-lp55xx.h> #include <linux/slab.h> #include <linux/gpio/consumer.h> +#include <dt-bindings/leds/leds-lp55xx.h> #include "leds-lp55xx-common.h" @@ -691,6 +692,14 @@ struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev, i++; } + if (of_property_read_u32(np, "ti,charge-pump-mode", &pdata->charge_pump_mode)) + pdata->charge_pump_mode = LP55XX_CP_AUTO; + + if (pdata->charge_pump_mode > LP55XX_CP_AUTO) { + dev_err(dev, "invalid charge pump mode %d\n", pdata->charge_pump_mode); + return ERR_PTR(-EINVAL); + } + of_property_read_string(np, "label", &pdata->label); of_property_read_u8(np, "clock-mode", &pdata->clock_mode); diff --git a/drivers/leds/leds-lp8501.c b/drivers/leds/leds-lp8501.c index 165d6423a928..878d81dace8a 100644 --- a/drivers/leds/leds-lp8501.c +++ b/drivers/leds/leds-lp8501.c @@ -53,10 +53,10 @@ #define LP8501_PWM_PSAVE BIT(7) #define LP8501_AUTO_INC BIT(6) #define LP8501_PWR_SAVE BIT(5) -#define LP8501_CP_AUTO 0x18 +#define LP8501_CP_MODE_MASK 0x18 +#define LP8501_CP_MODE_SHIFT 3 #define LP8501_INT_CLK BIT(0) -#define LP8501_DEFAULT_CFG \ - (LP8501_PWM_PSAVE | LP8501_AUTO_INC | LP8501_PWR_SAVE | LP8501_CP_AUTO) +#define LP8501_DEFAULT_CFG (LP8501_PWM_PSAVE | LP8501_AUTO_INC | LP8501_PWR_SAVE) #define LP8501_REG_RESET 0x3D #define LP8501_RESET 0xFF @@ -102,6 +102,8 @@ static int lp8501_post_init_device(struct lp55xx_chip *chip) if (chip->pdata->clock_mode != LP55XX_CLOCK_EXT) val |= LP8501_INT_CLK; + val |= (chip->pdata->charge_pump_mode << LP8501_CP_MODE_SHIFT) & LP8501_CP_MODE_MASK; + ret = lp55xx_write(chip, LP8501_REG_CONFIG, val); if (ret) return ret; diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 3441064713a3..3cc8db0b12b5 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -73,6 +73,9 @@ struct lp55xx_platform_data { /* Clock configuration */ u8 clock_mode; + /* Charge pump mode */ + u32 charge_pump_mode; + /* optional enable GPIO */ struct gpio_desc *enable_gpiod; |