summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio13
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-dma-buffer19
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml49
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bma180.txt7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml54
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml54
-rw-r--r--Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml47
-rw-r--r--Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt13
-rw-r--r--Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml37
-rw-r--r--Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml51
-rw-r--r--Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml51
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt7
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml4
-rw-r--r--MAINTAINERS32
-rw-r--r--drivers/iio/accel/Kconfig20
-rw-r--r--drivers/iio/accel/Makefile2
-rw-r--r--drivers/iio/accel/bma180.c225
-rw-r--r--drivers/iio/accel/bma400.h99
-rw-r--r--drivers/iio/accel/bma400_core.c852
-rw-r--r--drivers/iio/accel/bma400_i2c.c61
-rw-r--r--drivers/iio/accel/st_accel.h2
-rw-r--r--drivers/iio/accel/st_accel_i2c.c2
-rw-r--r--drivers/iio/adc/Kconfig17
-rw-r--r--drivers/iio/adc/Makefile4
-rw-r--r--drivers/iio/adc/ad7091r-base.c298
-rw-r--r--drivers/iio/adc/ad7091r-base.h26
-rw-r--r--drivers/iio/adc/ad7091r5.c113
-rw-r--r--drivers/iio/adc/ad7266.c29
-rw-r--r--drivers/iio/adc/ad7887.c82
-rw-r--r--drivers/iio/adc/ad7923.c64
-rw-r--r--drivers/iio/adc/ad799x.c66
-rw-r--r--drivers/iio/adc/ltc2496.c108
-rw-r--r--drivers/iio/adc/ltc2497-core.c243
-rw-r--r--drivers/iio/adc/ltc2497.c234
-rw-r--r--drivers/iio/adc/ltc2497.h18
-rw-r--r--drivers/iio/adc/max9611.c36
-rw-r--r--drivers/iio/adc/stm32-adc-core.c14
-rw-r--r--drivers/iio/adc/stm32-adc-core.h9
-rw-r--r--drivers/iio/adc/stm32-adc.c55
-rw-r--r--drivers/iio/adc/ti-ads1015.c73
-rw-r--r--drivers/iio/adc/ti-ads7950.c2
-rw-r--r--drivers/iio/buffer/industrialio-buffer-dma.c2
-rw-r--r--drivers/iio/buffer/industrialio-buffer-dmaengine.c30
-rw-r--r--drivers/iio/buffer/kfifo_buf.c5
-rw-r--r--drivers/iio/chemical/Makefile2
-rw-r--r--drivers/iio/chemical/atlas-sensor.c (renamed from drivers/iio/chemical/atlas-ph-sensor.c)11
-rw-r--r--drivers/iio/common/ssp_sensors/ssp.h14
-rw-r--r--drivers/iio/common/ssp_sensors/ssp_dev.c29
-rw-r--r--drivers/iio/common/ssp_sensors/ssp_spi.c8
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_trigger.c3
-rw-r--r--drivers/iio/dac/ad5592r-base.c1
-rw-r--r--drivers/iio/dac/ad7303.c25
-rw-r--r--drivers/iio/frequency/adf4350.c30
-rw-r--r--drivers/iio/gyro/Kconfig32
-rw-r--r--drivers/iio/gyro/adis16136.c31
-rw-r--r--drivers/iio/gyro/adis16260.c6
-rw-r--r--drivers/iio/gyro/itg3200_core.c1
-rw-r--r--drivers/iio/gyro/st_gyro.h2
-rw-r--r--drivers/iio/humidity/hts221_core.c19
-rw-r--r--drivers/iio/iio_core.h8
-rw-r--r--drivers/iio/imu/adis.c94
-rw-r--r--drivers/iio/imu/adis16400.c51
-rw-r--r--drivers/iio/imu/adis16480.c17
-rw-r--r--drivers/iio/imu/adis_buffer.c4
-rw-r--r--drivers/iio/imu/inv_mpu6050/Kconfig9
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c57
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c2
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c80
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c1
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c1
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h30
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c27
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c110
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c3
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c76
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c3
-rw-r--r--drivers/iio/industrialio-buffer.c10
-rw-r--r--drivers/iio/industrialio-core.c25
-rw-r--r--drivers/iio/light/apds9960.c2
-rw-r--r--drivers/iio/light/lm3533-als.c2
-rw-r--r--drivers/iio/light/si1145.c1
-rw-r--r--drivers/iio/light/st_uvis25_i2c.c1
-rw-r--r--drivers/iio/magnetometer/ak8975.c54
-rw-r--r--drivers/iio/pressure/Kconfig12
-rw-r--r--drivers/iio/pressure/Makefile1
-rw-r--r--drivers/iio/pressure/bmp280-i2c.c18
-rw-r--r--drivers/iio/pressure/dlhl60d.c375
-rw-r--r--drivers/iio/pressure/st_pressure.h2
-rw-r--r--drivers/iio/pressure/st_pressure_i2c.c2
-rw-r--r--drivers/iio/proximity/Kconfig15
-rw-r--r--drivers/iio/proximity/Makefile1
-rw-r--r--drivers/iio/proximity/as3935.c3
-rw-r--r--drivers/iio/proximity/ping.c335
-rw-r--r--drivers/iio/resolver/ad2s1200.c1
-rw-r--r--drivers/iio/temperature/max31856.c134
-rw-r--r--drivers/iio/temperature/maxim_thermocouple.c44
-rw-r--r--drivers/iio/trigger/stm32-timer-trigger.c3
-rw-r--r--drivers/staging/iio/accel/adis16240.c7
-rw-r--r--include/linux/iio/buffer_impl.h6
-rw-r--r--include/linux/iio/frequency/adf4350.h4
-rw-r--r--include/linux/iio/imu/adis.h150
-rw-r--r--include/linux/iio/magnetometer/ak8975.h2
-rw-r--r--include/linux/iio/types.h2
-rw-r--r--include/linux/platform_data/ad7266.h3
-rw-r--r--include/linux/platform_data/ads1015.h23
105 files changed, 4394 insertions, 860 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index faaa2166d741..d3e53a6d8331 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1726,3 +1726,16 @@ Contact: linux-iio@vger.kernel.org
Description:
List of valid periods (in seconds) for which the light intensity
must be above the threshold level before interrupt is asserted.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency
+KernelVersion: 5.5
+Contact: linux-iio@vger.kernel.org
+Description:
+ Center frequency in Hz for a notch filter. Used i.e. for line
+ noise suppression.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_temp_thermocouple_type
+KernelVersion: 5.5
+Contact: linux-iio@vger.kernel.org
+Description:
+ One of the following thermocouple types: B, E, J, K, N, R, S, T.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer b/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer
new file mode 100644
index 000000000000..d526e6571001
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer
@@ -0,0 +1,19 @@
+What: /sys/bus/iio/devices/iio:deviceX/buffer/length_align_bytes
+KernelVersion: 5.4
+Contact: linux-iio@vger.kernel.org
+Description:
+ DMA buffers tend to have a alignment requirement for the
+ buffers. If this alignment requirement is not met samples might
+ be dropped from the buffer.
+
+ This property reports the alignment requirements in bytes.
+ This means that the buffer size in bytes needs to be a integer
+ multiple of the number reported by this file.
+
+ The alignment requirements in number of sample sets will depend
+ on the enabled channels and the bytes per channel. This means
+ that the alignment requirement in samples sets might change
+ depending on which and how many channels are enabled. Whereas
+ the alignment requirement reported in bytes by this property
+ will remain static and does not depend on which channels are
+ enabled.
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
new file mode 100644
index 000000000000..4147f02b5e3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADIS16240 Programmable Impact Sensor and Recorder driver
+
+maintainers:
+ - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+ ADIS16240 Programmable Impact Sensor and Recorder driver that supports
+ SPI interface.
+ https://www.analog.com/en/products/adis16240.html
+
+properties:
+ compatible:
+ enum:
+ - adi,adis16240
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Example for a SPI device node */
+ accelerometer@0 {
+ compatible = "adi,adis16240";
+ reg = <0>;
+ spi-max-frequency = <2500000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
index 3b25b4c4d446..f53237270b32 100644
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -1,11 +1,14 @@
-* Bosch BMA180 / BMA250 triaxial acceleration sensor
+* Bosch BMA180 / BMA25x triaxial acceleration sensor
http://omapworld.com/BMA180_111_1002839.pdf
http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
Required properties:
- - compatible : should be "bosch,bma180" or "bosch,bma250"
+ - compatible : should be one of:
+ "bosch,bma180"
+ "bosch,bma250"
+ "bosch,bma254"
- reg : the I2C address of the sensor
Optional properties:
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
new file mode 100644
index 000000000000..c1c6d6f223cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+ - Dan Robertson <dan@dlrobertson.com>
+
+description: |
+ Acceleration and temperature iio sensors with an i2c interface
+
+ Specifications about the sensor can be found at:
+ https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf
+
+properties:
+ compatible:
+ enum:
+ - bosch,bma400
+
+ reg:
+ maxItems: 1
+
+ vdd-supply:
+ description: phandle to the regulator that provides power to the accelerometer
+
+ vddio-supply:
+ description: phandle to the regulator that provides power to the sensor's IO
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ accelerometer@14 {
+ compatible = "bosch,bma400";
+ reg = <0x14>;
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
new file mode 100644
index 000000000000..31ffa275f5fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
+
+maintainers:
+ - Beniamin Bia <beniamin.bia@analog.com>
+
+description: |
+ Analog Devices AD7091R5 4-Channel 12-Bit ADC
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad7091r5
+
+ reg:
+ maxItems: 1
+
+ vref-supply:
+ description:
+ Phandle to the vref power supply
+
+ interrupts:
+ maxItems: 1
+
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@2f {
+ compatible = "adi,ad7091r5";
+ reg = <0x2f>;
+
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
new file mode 100644
index 000000000000..59009997dca0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2496.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology / Analog Devices LTC2496 ADC
+
+maintainers:
+ - Lars-Peter Clausen <lars@metafoo.de>
+ - Michael Hennerich <Michael.Hennerich@analog.com>
+ - Stefan Popa <stefan.popa@analog.com>
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc2496
+
+ vref-supply:
+ description: phandle to an external regulator providing the reference voltage
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+ reg:
+ description: spi chipselect number according to the usual spi bindings
+
+ spi-max-frequency:
+ description: maximal spi bus frequency supported
+
+required:
+ - compatible
+ - vref-supply
+ - reg
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "lltc,ltc2496";
+ reg = <0>;
+ vref-supply = <&ltc2496_reg>;
+ spi-max-frequency = <2000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
deleted file mode 100644
index 59b92cd32552..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Device-Tree bindings for sigma delta modulator
-
-Required properties:
-- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
- as a generic SD modulator if modulator not specified in compatible list.
-- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers".
-
-Example node:
-
- ads1202: adc {
- compatible = "sd-modulator";
- #io-channel-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
new file mode 100644
index 000000000000..a390343d0c2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for sigma delta modulator
+
+maintainers:
+ - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+
+properties:
+ compatible:
+ description: |
+ "sd-modulator" can be used as a generic SD modulator,
+ if the modulator is not specified in the compatible list.
+ enum:
+ - sd-modulator
+ - ads1201
+
+ '#io-channel-cells':
+ const: 0
+
+required:
+ - compatible
+ - '#io-channel-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ ads1202: adc {
+ compatible = "sd-modulator";
+ #io-channel-cells = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
new file mode 100644
index 000000000000..9f5ca9c42025
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: All Sensors DLH series low voltage digital pressure sensors
+
+maintainers:
+ - Tomislav Denis <tomislav.denis@avl.com>
+
+description: |
+ Bindings for the All Sensors DLH series pressure sensors.
+
+ Specifications about the sensors can be found at:
+ http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+
+properties:
+ compatible:
+ enum:
+ - asc,dlhl60d
+ - asc,dlhl60g
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ interrupts:
+ description: interrupt mapping for EOC(data ready) pin
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@29 {
+ compatible = "asc,dlhl60d";
+ reg = <0x29>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <10 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
new file mode 100644
index 000000000000..a079c9921af6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/parallax-ping.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parallax PING))) and LaserPING range finder
+
+maintainers:
+ - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+ Bit-banging driver using one GPIO:
+ - ping-gpios is raised by the driver to start measurement
+ - direction of ping-gpio is then switched into input with an interrupt
+ for receiving distance value as PWM signal
+
+ Specifications about the devices can be found at:
+ http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf
+ http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf
+
+properties:
+ compatible:
+ enum:
+ - parallax,ping
+ - parallax,laserping
+
+ ping-gpios:
+ description:
+ Definition of the GPIO for the triggering and echo (output and input)
+ This GPIO is set for about 5 us by the driver to tell the device it
+ should initiate the measurement cycle. Afterwards the GPIO is switched
+ to input direction with an interrupt. The device sets it and the
+ length of the input signal corresponds to the measured distance.
+ It needs to be an GPIO which is able to deliver an interrupt because
+ the time between two interrupts is measured in the driver.
+ See Documentation/devicetree/bindings/gpio/gpio.txt for information
+ on how to specify a consumer gpio.
+ maxItems: 1
+
+required:
+ - compatible
+ - ping-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ proximity {
+ compatible = "parallax,laserping";
+ ping-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
index 28bc5c4d965b..bb85cd0e039c 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
@@ -5,7 +5,10 @@ Maxim thermocouple support
Required properties:
- - compatible: must be "maxim,max31855" or "maxim,max6675"
+ - compatible: must be "maxim,max6675" or one of the following:
+ "maxim,max31855k", "maxim,max31855j", "maxim,max31855n",
+ "maxim,max31855s", "maxim,max31855t", "maxim,max31855e",
+ "maxim,max31855r"; the generic "max,max31855" is deprecated.
- reg: SPI chip select number for the device
- spi-max-frequency: must be 4300000
- spi-cpha: must be defined for max6675 to enable SPI mode 1
@@ -15,7 +18,7 @@ Required properties:
Example:
max31855@0 {
- compatible = "maxim,max31855";
+ compatible = "maxim,max31855k";
reg = <0>;
spi-max-frequency = <4300000>;
};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 6046f4555852..24074f01e5d2 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -109,6 +109,8 @@ patternProperties:
description: Artesyn Embedded Technologies Inc.
"^asahi-kasei,.*":
description: Asahi Kasei Corp.
+ "^asc,.*":
+ description: All Sensors Corporation
"^aspeed,.*":
description: ASPEED Technology Inc.
"^asus,.*":
@@ -717,6 +719,8 @@ patternProperties:
description: Panasonic Corporation
"^parade,.*":
description: Parade Technologies Inc.
+ "^parallax,.*":
+ description: Parallax Inc.
"^pda,.*":
description: Precision Design Associates, Inc.
"^pericom,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index c80c5919b515..e699fe378e71 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -674,6 +674,14 @@ S: Maintained
F: Documentation/i2c/busses/i2c-ali1563.rst
F: drivers/i2c/busses/i2c-ali1563.c
+ALL SENSORS DLH SERIES PRESSURE SENSORS DRIVER
+M: Tomislav Denis <tomislav.denis@avl.com>
+W: http://www.allsensors.com/
+S: Maintained
+L: linux-iio@vger.kernel.org
+F: drivers/iio/pressure/dlhl60d.c
+F: Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+
ALLEGRO DVT VIDEO IP CORE DRIVER
M: Michael Tretter <m.tretter@pengutronix.de>
R: Pengutronix Kernel Team <kernel@pengutronix.de>
@@ -898,6 +906,14 @@ S: Supported
F: drivers/iio/dac/ad5758.c
F: Documentation/devicetree/bindings/iio/dac/ad5758.txt
+ANALOG DEVICES INC AD7091R5 DRIVER
+M: Beniamin Bia <beniamin.bia@analog.com>
+L: linux-iio@vger.kernel.org
+W: http://ez.analog.com/community/linux-device-drivers
+S: Supported
+F: drivers/iio/adc/ad7091r5.c
+F: Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+
ANALOG DEVICES INC AD7124 DRIVER
M: Stefan Popa <stefan.popa@analog.com>
L: linux-iio@vger.kernel.org
@@ -1043,7 +1059,7 @@ S: Supported
F: Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
F: Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
F: drivers/iio/*/ad*
-F: drivers/iio/adc/ltc2497*
+F: drivers/iio/adc/ltc249*
X: drivers/iio/*/adjd*
F: drivers/staging/iio/*/ad*
@@ -3089,6 +3105,13 @@ S: Supported
F: drivers/net/bonding/
F: include/uapi/linux/if_bonding.h
+BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER
+M: Dan Robertson <dan@dlrobertson.com>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: drivers/iio/accel/bma400*
+F: Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+
BPF (Safe dynamic programs and tools)
M: Alexei Starovoitov <ast@kernel.org>
M: Daniel Borkmann <daniel@iogearbox.net>
@@ -12443,6 +12466,13 @@ L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/panasonic-laptop.c
+PARALLAX PING IIO SENSOR DRIVER
+M: Andreas Klinger <ak@it-klinger.de>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
+F: drivers/iio/proximity/ping.c
+
PARALLEL LCD/KEYPAD PANEL DRIVER
M: Willy Tarreau <willy@haproxy.com>
M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index d4ef35aeb579..5d91a6dda894 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -89,13 +89,13 @@ config ADXL372_I2C
module will be called adxl372_i2c.
config BMA180
- tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
+ tristate "Bosch BMA180/BMA25x 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here if you want to build a driver for the Bosch BMA180 or
- BMA250 triaxial acceleration sensor.
+ BMA25x triaxial acceleration sensor.
To compile this driver as a module, choose M here: the
module will be called bma180.
@@ -112,6 +112,22 @@ config BMA220
To compile this driver as a module, choose M here: the
module will be called bma220_spi.
+config BMA400
+ tristate "Bosch BMA400 3-Axis Accelerometer Driver"
+ select REGMAP
+ select BMA400_I2C if I2C
+ help
+ Say Y here if you want to build a driver for the Bosch BMA400
+ triaxial acceleration sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bma400_core and you will also get
+ bma400_i2c if I2C is enabled.
+
+config BMA400_I2C
+ tristate
+ depends on BMA400
+
config BMC150_ACCEL
tristate "Bosch BMC150 Accelerometer Driver"
select IIO_BUFFER
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 56bd0215e0d4..3a051cf37f40 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -14,6 +14,8 @@ obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
obj-$(CONFIG_BMA180) += bma180.o
obj-$(CONFIG_BMA220) += bma220_spi.o
+obj-$(CONFIG_BMA400) += bma400_core.o
+obj-$(CONFIG_BMA400_I2C) += bma400_i2c.o
obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 1574e4604a4f..fcd91d5f05fd 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -9,6 +9,7 @@
* SPI is not supported by driver
* BMA180: 7-bit I2C slave address 0x40 or 0x41
* BMA250: 7-bit I2C slave address 0x18 or 0x19
+ * BMA254: 7-bit I2C slave address 0x18 or 0x19
*/
#include <linux/module.h>
@@ -18,6 +19,7 @@
#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/bitops.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/iio/iio.h>
@@ -33,17 +35,20 @@
enum chip_ids {
BMA180,
BMA250,
+ BMA254,
};
struct bma180_data;
struct bma180_part_info {
+ u8 chip_id;
const struct iio_chan_spec *channels;
unsigned int num_channels;
const int *scale_table;
unsigned int num_scales;
const int *bw_table;
unsigned int num_bw;
+ int center_temp;
u8 int_reset_reg, int_reset_mask;
u8 sleep_reg, sleep_mask;
@@ -51,6 +56,7 @@ struct bma180_part_info {
u8 scale_reg, scale_mask;
u8 power_reg, power_mask, lowpower_val;
u8 int_enable_reg, int_enable_mask;
+ u8 int_map_reg, int_enable_dataready_int1_mask;
u8 softreset_reg;
int (*chip_config)(struct bma180_data *data);
@@ -89,6 +95,8 @@ struct bma180_part_info {
#define BMA180_RESET_VAL 0xb6
#define BMA180_ID_REG_VAL 0x03
+#define BMA250_ID_REG_VAL 0x03
+#define BMA254_ID_REG_VAL 0xfa /* 250 decimal */
/* Chip power modes */
#define BMA180_LOW_POWER 0x03
@@ -109,7 +117,26 @@ struct bma180_part_info {
#define BMA250_INT1_DATA_MASK BIT(0)
#define BMA250_INT_RESET_MASK BIT(7) /* Reset pending interrupts */
+#define BMA254_RANGE_REG 0x0f
+#define BMA254_BW_REG 0x10
+#define BMA254_POWER_REG 0x11
+#define BMA254_RESET_REG 0x14
+#define BMA254_INT_ENABLE_REG 0x17
+#define BMA254_INT_MAP_REG 0x1a
+#define BMA254_INT_RESET_REG 0x21
+
+#define BMA254_RANGE_MASK GENMASK(3, 0) /* Range of accel values */
+#define BMA254_BW_MASK GENMASK(4, 0) /* Accel bandwidth */
+#define BMA254_SUSPEND_MASK BIT(7) /* chip will sleep */
+#define BMA254_LOWPOWER_MASK BIT(6)
+#define BMA254_DATA_INTEN_MASK BIT(4)
+#define BMA254_INT2_DATA_MASK BIT(7)
+#define BMA254_INT1_DATA_MASK BIT(0)
+#define BMA254_INT_RESET_MASK BIT(7) /* Reset pending interrupts */
+
struct bma180_data {
+ struct regulator *vdd_supply;
+ struct regulator *vddio_supply;
struct i2c_client *client;
struct iio_trigger *trig;
const struct bma180_part_info *part_info;
@@ -132,8 +159,8 @@ enum bma180_chan {
static int bma180_bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */
static int bma180_scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 };
-static int bma250_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */
-static int bma250_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0,
+static int bma25x_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */
+static int bma25x_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0,
0, 0, 306458 };
static int bma180_get_data_reg(struct bma180_data *data, enum bma180_chan chan)
@@ -307,8 +334,11 @@ static int bma180_chip_init(struct bma180_data *data)
if (ret < 0)
return ret;
- if (ret != BMA180_ID_REG_VAL)
+ if (ret != data->part_info->chip_id) {
+ dev_err(&data->client->dev, "wrong chip ID %d expected %d\n",
+ ret, data->part_info->chip_id);
return -ENODEV;
+ }
ret = bma180_soft_reset(data);
if (ret)
@@ -355,7 +385,7 @@ err:
return ret;
}
-static int bma250_chip_config(struct bma180_data *data)
+static int bma25x_chip_config(struct bma180_data *data)
{
int ret = bma180_chip_init(data);
@@ -367,8 +397,12 @@ static int bma250_chip_config(struct bma180_data *data)
ret = bma180_set_scale(data, 38344); /* 2 G */
if (ret)
goto err;
- ret = bma180_set_bits(data, BMA250_INT_MAP_REG,
- BMA250_INT1_DATA_MASK, 1);
+ /*
+ * This enables dataready interrupt on the INT1 pin
+ * FIXME: support using the INT2 pin
+ */
+ ret = bma180_set_bits(data, data->part_info->int_map_reg,
+ data->part_info->int_enable_dataready_int1_mask, 1);
if (ret)
goto err;
@@ -394,7 +428,7 @@ err:
dev_err(&data->client->dev, "failed to disable the chip\n");
}
-static void bma250_chip_disable(struct bma180_data *data)
+static void bma25x_chip_disable(struct bma180_data *data)
{
if (bma180_set_new_data_intr_state(data, false))
goto err;
@@ -497,7 +531,7 @@ static int bma180_read_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
- *val = 48; /* 0 LSB @ 24 degree C */
+ *val = data->part_info->center_temp;
return IIO_VAL_INT;
default:
return -EINVAL;
@@ -627,34 +661,96 @@ static const struct iio_chan_spec bma250_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(4),
};
+static const struct iio_chan_spec bma254_channels[] = {
+ BMA180_ACC_CHANNEL(X, 12),
+ BMA180_ACC_CHANNEL(Y, 12),
+ BMA180_ACC_CHANNEL(Z, 12),
+ BMA180_TEMP_CHANNEL,
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
static const struct bma180_part_info bma180_part_info[] = {
[BMA180] = {
- bma180_channels, ARRAY_SIZE(bma180_channels),
- bma180_scale_table, ARRAY_SIZE(bma180_scale_table),
- bma180_bw_table, ARRAY_SIZE(bma180_bw_table),
- BMA180_CTRL_REG0, BMA180_RESET_INT,
- BMA180_CTRL_REG0, BMA180_SLEEP,
- BMA180_BW_TCS, BMA180_BW,
- BMA180_OFFSET_LSB1, BMA180_RANGE,
- BMA180_TCO_Z, BMA180_MODE_CONFIG, BMA180_LOW_POWER,
- BMA180_CTRL_REG3, BMA180_NEW_DATA_INT,
- BMA180_RESET,
- bma180_chip_config,
- bma180_chip_disable,
+ .chip_id = BMA180_ID_REG_VAL,
+ .channels = bma180_channels,
+ .num_channels = ARRAY_SIZE(bma180_channels),
+ .scale_table = bma180_scale_table,
+ .num_scales = ARRAY_SIZE(bma180_scale_table),
+ .bw_table = bma180_bw_table,
+ .num_bw = ARRAY_SIZE(bma180_bw_table),
+ .center_temp = 48, /* 0 LSB @ 24 degree C */
+ .int_reset_reg = BMA180_CTRL_REG0,
+ .int_reset_mask = BMA180_RESET_INT,
+ .sleep_reg = BMA180_CTRL_REG0,
+ .sleep_mask = BMA180_SLEEP,
+ .bw_reg = BMA180_BW_TCS,
+ .bw_mask = BMA180_BW,
+ .scale_reg = BMA180_OFFSET_LSB1,
+ .scale_mask = BMA180_RANGE,
+ .power_reg = BMA180_TCO_Z,
+ .power_mask = BMA180_MODE_CONFIG,
+ .lowpower_val = BMA180_LOW_POWER,
+ .int_enable_reg = BMA180_CTRL_REG3,
+ .int_enable_mask = BMA180_NEW_DATA_INT,
+ .softreset_reg = BMA180_RESET,
+ .chip_config = bma180_chip_config,
+ .chip_disable = bma180_chip_disable,
},
[BMA250] = {
- bma250_channels, ARRAY_SIZE(bma250_channels),
- bma250_scale_table, ARRAY_SIZE(bma250_scale_table),
- bma250_bw_table, ARRAY_SIZE(bma250_bw_table),
- BMA250_INT_RESET_REG, BMA250_INT_RESET_MASK,
- BMA250_POWER_REG, BMA250_SUSPEND_MASK,
- BMA250_BW_REG, BMA250_BW_MASK,
- BMA250_RANGE_REG, BMA250_RANGE_MASK,
- BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1,
- BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK,
- BMA250_RESET_REG,
- bma250_chip_config,
- bma250_chip_disable,
+ .chip_id = BMA250_ID_REG_VAL,
+ .channels = bma250_channels,
+ .num_channels = ARRAY_SIZE(bma250_channels),
+ .scale_table = bma25x_scale_table,
+ .num_scales = ARRAY_SIZE(bma25x_scale_table),
+ .bw_table = bma25x_bw_table,
+ .num_bw = ARRAY_SIZE(bma25x_bw_table),
+ .center_temp = 48, /* 0 LSB @ 24 degree C */
+ .int_reset_reg = BMA250_INT_RESET_REG,
+ .int_reset_mask = BMA250_INT_RESET_MASK,
+ .sleep_reg = BMA250_POWER_REG,
+ .sleep_mask = BMA250_SUSPEND_MASK,
+ .bw_reg = BMA250_BW_REG,
+ .bw_mask = BMA250_BW_MASK,
+ .scale_reg = BMA250_RANGE_REG,
+ .scale_mask = BMA250_RANGE_MASK,
+ .power_reg = BMA250_POWER_REG,
+ .power_mask = BMA250_LOWPOWER_MASK,
+ .lowpower_val = 1,
+ .int_enable_reg = BMA250_INT_ENABLE_REG,
+ .int_enable_mask = BMA250_DATA_INTEN_MASK,
+ .int_map_reg = BMA250_INT_MAP_REG,
+ .int_enable_dataready_int1_mask = BMA250_INT1_DATA_MASK,
+ .softreset_reg = BMA250_RESET_REG,
+ .chip_config = bma25x_chip_config,
+ .chip_disable = bma25x_chip_disable,
+ },
+ [BMA254] = {
+ .chip_id = BMA254_ID_REG_VAL,
+ .channels = bma254_channels,
+ .num_channels = ARRAY_SIZE(bma254_channels),
+ .scale_table = bma25x_scale_table,
+ .num_scales = ARRAY_SIZE(bma25x_scale_table),
+ .bw_table = bma25x_bw_table,
+ .num_bw = ARRAY_SIZE(bma25x_bw_table),
+ .center_temp = 46, /* 0 LSB @ 23 degree C */
+ .int_reset_reg = BMA254_INT_RESET_REG,
+ .int_reset_mask = BMA254_INT_RESET_MASK,
+ .sleep_reg = BMA254_POWER_REG,
+ .sleep_mask = BMA254_SUSPEND_MASK,
+ .bw_reg = BMA254_BW_REG,
+ .bw_mask = BMA254_BW_MASK,
+ .scale_reg = BMA254_RANGE_REG,
+ .scale_mask = BMA254_RANGE_MASK,
+ .power_reg = BMA254_POWER_REG,
+ .power_mask = BMA254_LOWPOWER_MASK,
+ .lowpower_val = 1,
+ .int_enable_reg = BMA254_INT_ENABLE_REG,
+ .int_enable_mask = BMA254_DATA_INTEN_MASK,
+ .int_map_reg = BMA254_INT_MAP_REG,
+ .int_enable_dataready_int1_mask = BMA254_INT1_DATA_MASK,
+ .softreset_reg = BMA254_RESET_REG,
+ .chip_config = bma25x_chip_config,
+ .chip_disable = bma25x_chip_disable,
},
};
@@ -712,12 +808,13 @@ static const struct iio_trigger_ops bma180_trigger_ops = {
static int bma180_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct device *dev = &client->dev;
struct bma180_data *data;
struct iio_dev *indio_dev;
enum chip_ids chip;
int ret;
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
@@ -725,22 +822,56 @@ static int bma180_probe(struct i2c_client *client,
i2c_set_clientdata(client, indio_dev);
data->client = client;
if (client->dev.of_node)
- chip = (enum chip_ids)of_device_get_match_data(&client->dev);
+ chip = (enum chip_ids)of_device_get_match_data(dev);
else
chip = id->driver_data;
data->part_info = &bma180_part_info[chip];
- ret = iio_read_mount_matrix(&client->dev, "mount-matrix",
+ ret = iio_read_mount_matrix(dev, "mount-matrix",
&data->orientation);
if (ret)
return ret;
+ data->vdd_supply = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(data->vdd_supply)) {
+ if (PTR_ERR(data->vdd_supply) != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get vdd regulator %d\n",
+ (int)PTR_ERR(data->vdd_supply));
+ return PTR_ERR(data->vdd_supply);
+ }
+ data->vddio_supply = devm_regulator_get(dev, "vddio");
+ if (IS_ERR(data->vddio_supply)) {
+ if (PTR_ERR(data->vddio_supply) != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get vddio regulator %d\n",
+ (int)PTR_ERR(data->vddio_supply));
+ return PTR_ERR(data->vddio_supply);
+ }
+ /* Typical voltage 2.4V these are min and max */
+ ret = regulator_set_voltage(data->vdd_supply, 1620000, 3600000);
+ if (ret)
+ return ret;
+ ret = regulator_set_voltage(data->vddio_supply, 1200000, 3600000);
+ if (ret)
+ return ret;
+ ret = regulator_enable(data->vdd_supply);
+ if (ret) {
+ dev_err(dev, "Failed to enable vdd regulator: %d\n", ret);
+ return ret;
+ }
+ ret = regulator_enable(data->vddio_supply);
+ if (ret) {
+ dev_err(dev, "Failed to enable vddio regulator: %d\n", ret);
+ goto err_disable_vdd;
+ }
+ /* Wait to make sure we started up properly (3 ms at least) */
+ usleep_range(3000, 5000);
+
ret = data->part_info->chip_config(data);
if (ret < 0)
goto err_chip_disable;
mutex_init(&data->mutex);
- indio_dev->dev.parent = &client->dev;
+ indio_dev->dev.parent = dev;
indio_dev->channels = data->part_info->channels;
indio_dev->num_channels = data->part_info->num_channels;
indio_dev->name = id->name;
@@ -755,15 +886,15 @@ static int bma180_probe(struct i2c_client *client,
goto err_chip_disable;
}
- ret = devm_request_irq(&client->dev, client->irq,
+ ret = devm_request_irq(dev, client->irq,
iio_trigger_generic_data_rdy_poll, IRQF_TRIGGER_RISING,
"bma180_event", data->trig);
if (ret) {
- dev_err(&client->dev, "unable to request IRQ\n");
+ dev_err(dev, "unable to request IRQ\n");
goto err_trigger_free;
}
- data->trig->dev.parent = &client->dev;
+ data->trig->dev.parent = dev;
data->trig->ops = &bma180_trigger_ops;
iio_trigger_set_drvdata(data->trig, indio_dev);
indio_dev->trig = iio_trigger_get(data->trig);
@@ -776,13 +907,13 @@ static int bma180_probe(struct i2c_client *client,
ret = iio_triggered_buffer_setup(indio_dev, NULL,
bma180_trigger_handler, NULL);
if (ret < 0) {
- dev_err(&client->dev, "unable to setup iio triggered buffer\n");
+ dev_err(dev, "unable to setup iio triggered buffer\n");
goto err_trigger_unregister;
}
ret = iio_device_register(indio_dev);
if (ret < 0) {
- dev_err(&client->dev, "unable to register iio device\n");
+ dev_err(dev, "unable to register iio device\n");
goto err_buffer_cleanup;
}
@@ -797,6 +928,9 @@ err_trigger_free:
iio_trigger_free(data->trig);
err_chip_disable:
data->part_info->chip_disable(data);
+ regulator_disable(data->vddio_supply);
+err_disable_vdd:
+ regulator_disable(data->vdd_supply);
return ret;
}
@@ -816,6 +950,8 @@ static int bma180_remove(struct i2c_client *client)
mutex_lock(&data->mutex);
data->part_info->chip_disable(data);
mutex_unlock(&data->mutex);
+ regulator_disable(data->vddio_supply);
+ regulator_disable(data->vdd_supply);
return 0;
}
@@ -856,6 +992,7 @@ static SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
static const struct i2c_device_id bma180_ids[] = {
{ "bma180", BMA180 },
{ "bma250", BMA250 },
+ { "bma254", BMA254 },
{ }
};
@@ -870,6 +1007,10 @@ static const struct of_device_id bma180_of_match[] = {
.compatible = "bosch,bma250",
.data = (void *)BMA250
},
+ {
+ .compatible = "bosch,bma254",
+ .data = (void *)BMA254
+ },
{ }
};
MODULE_DEVICE_TABLE(of, bma180_of_match);
@@ -889,5 +1030,5 @@ module_i2c_driver(bma180_driver);
MODULE_AUTHOR("Kravchenko Oleksandr <x0199363@ti.com>");
MODULE_AUTHOR("Texas Instruments, Inc.");
-MODULE_DESCRIPTION("Bosch BMA180/BMA250 triaxial acceleration sensor");
+MODULE_DESCRIPTION("Bosch BMA180/BMA25x triaxial acceleration sensor");
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h
new file mode 100644
index 000000000000..5ad10db9819f
--- /dev/null
+++ b/drivers/iio/accel/bma400.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Register constants and other forward declarations needed by the bma400
+ * sources.
+ *
+ * Copyright 2019 Dan Robertson <dan@dlrobertson.com>
+ */
+
+#ifndef _BMA400_H_
+#define _BMA400_H_
+
+#include <linux/bits.h>
+#include <linux/regmap.h>
+
+/*
+ * Read-Only Registers
+ */
+
+/* Status and ID registers */
+#define BMA400_CHIP_ID_REG 0x00
+#define BMA400_ERR_REG 0x02
+#define BMA400_STATUS_REG 0x03
+
+/* Acceleration registers */
+#define BMA400_X_AXIS_LSB_REG 0x04
+#define BMA400_X_AXIS_MSB_REG 0x05
+#define BMA400_Y_AXIS_LSB_REG 0x06
+#define BMA400_Y_AXIS_MSB_REG 0x07
+#define BMA400_Z_AXIS_LSB_REG 0x08
+#define BMA400_Z_AXIS_MSB_REG 0x09
+
+/* Sensor time registers */
+#define BMA400_SENSOR_TIME0 0x0a
+#define BMA400_SENSOR_TIME1 0x0b
+#define BMA400_SENSOR_TIME2 0x0c
+
+/* Event and interrupt registers */
+#define BMA400_EVENT_REG 0x0d
+#define BMA400_INT_STAT0_REG 0x0e
+#define BMA400_INT_STAT1_REG 0x0f
+#define BMA400_INT_STAT2_REG 0x10
+
+/* Temperature register */
+#define BMA400_TEMP_DATA_REG 0x11
+
+/* FIFO length and data registers */
+#define BMA400_FIFO_LENGTH0_REG 0x12
+#define BMA400_FIFO_LENGTH1_REG 0x13
+#define BMA400_FIFO_DATA_REG 0x14
+
+/* Step count registers */
+#define BMA400_STEP_CNT0_REG 0x15
+#define BMA400_STEP_CNT1_REG 0x16
+#define BMA400_STEP_CNT3_REG 0x17
+#define BMA400_STEP_STAT_REG 0x18
+
+/*
+ * Read-write configuration registers
+ */
+#define BMA400_ACC_CONFIG0_REG 0x19
+#define BMA400_ACC_CONFIG1_REG 0x1a
+#define BMA400_ACC_CONFIG2_REG 0x1b
+#define BMA400_CMD_REG 0x7e
+
+/* Chip ID of BMA 400 devices found in the chip ID register. */
+#define BMA400_ID_REG_VAL 0x90
+
+#define BMA400_LP_OSR_SHIFT 5
+#define BMA400_NP_OSR_SHIFT 4
+#define BMA400_SCALE_SHIFT 6
+
+#define BMA400_TWO_BITS_MASK GENMASK(1, 0)
+#define BMA400_LP_OSR_MASK GENMASK(6, 5)
+#define BMA400_NP_OSR_MASK GENMASK(5, 4)
+#define BMA400_ACC_ODR_MASK GENMASK(3, 0)
+#define BMA400_ACC_SCALE_MASK GENMASK(7, 6)
+
+#define BMA400_ACC_ODR_MIN_RAW 0x05
+#define BMA400_ACC_ODR_LP_RAW 0x06
+#define BMA400_ACC_ODR_MAX_RAW 0x0b
+
+#define BMA400_ACC_ODR_MAX_HZ 800
+#define BMA400_ACC_ODR_MIN_WHOLE_HZ 25
+#define BMA400_ACC_ODR_MIN_HZ 12
+
+#define BMA400_SCALE_MIN 38357
+#define BMA400_SCALE_MAX 306864
+
+#define BMA400_NUM_REGULATORS 2
+#define BMA400_VDD_REGULATOR 0
+#define BMA400_VDDIO_REGULATOR 1
+
+extern const struct regmap_config bma400_regmap_config;
+
+int bma400_probe(struct device *dev, struct regmap *regmap, const char *name);
+
+int bma400_remove(struct device *dev);
+
+#endif
diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
new file mode 100644
index 000000000000..ab4a158b35af
--- /dev/null
+++ b/drivers/iio/accel/bma400_core.c
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Core IIO driver for Bosch BMA400 triaxial acceleration sensor.
+ *
+ * Copyright 2019 Dan Robertson <dan@dlrobertson.com>
+ *
+ * TODO:
+ * - Support for power management
+ * - Support events and interrupts
+ * - Create channel for step count
+ * - Create channel for sensor time
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include "bma400.h"
+
+/*
+ * The G-range selection may be one of 2g, 4g, 8, or 16g. The scale may
+ * be selected with the acc_range bits of the ACC_CONFIG1 register.
+ * NB: This buffer is populated in the device init.
+ */
+static int bma400_scales[8];
+
+/*
+ * See the ACC_CONFIG1 section of the datasheet.
+ * NB: This buffer is populated in the device init.
+ */
+static int bma400_sample_freqs[14];
+
+static const int bma400_osr_range[] = { 0, 1, 3 };
+
+/* See the ACC_CONFIG0 section of the datasheet */
+enum bma400_power_mode {
+ POWER_MODE_SLEEP = 0x00,
+ POWER_MODE_LOW = 0x01,
+ POWER_MODE_NORMAL = 0x02,
+ POWER_MODE_INVALID = 0x03,
+};
+
+struct bma400_sample_freq {
+ int hz;
+ int uhz;
+};
+
+struct bma400_data {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regulator_bulk_data regulators[BMA400_NUM_REGULATORS];
+ struct mutex mutex; /* data register lock */
+ struct iio_mount_matrix orientation;
+ enum bma400_power_mode power_mode;
+ struct bma400_sample_freq sample_freq;
+ int oversampling_ratio;
+ int scale;
+};
+
+static bool bma400_is_writable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMA400_CHIP_ID_REG:
+ case BMA400_ERR_REG:
+ case BMA400_STATUS_REG:
+ case BMA400_X_AXIS_LSB_REG:
+ case BMA400_X_AXIS_MSB_REG:
+ case BMA400_Y_AXIS_LSB_REG:
+ case BMA400_Y_AXIS_MSB_REG:
+ case BMA400_Z_AXIS_LSB_REG:
+ case BMA400_Z_AXIS_MSB_REG:
+ case BMA400_SENSOR_TIME0:
+ case BMA400_SENSOR_TIME1:
+ case BMA400_SENSOR_TIME2:
+ case BMA400_EVENT_REG:
+ case BMA400_INT_STAT0_REG:
+ case BMA400_INT_STAT1_REG:
+ case BMA400_INT_STAT2_REG:
+ case BMA400_TEMP_DATA_REG:
+ case BMA400_FIFO_LENGTH0_REG:
+ case BMA400_FIFO_LENGTH1_REG:
+ case BMA400_FIFO_DATA_REG:
+ case BMA400_STEP_CNT0_REG:
+ case BMA400_STEP_CNT1_REG:
+ case BMA400_STEP_CNT3_REG:
+ case BMA400_STEP_STAT_REG:
+ return false;
+ default:
+ return true;
+ }
+}
+
+static bool bma400_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMA400_ERR_REG:
+ case BMA400_STATUS_REG:
+ case BMA400_X_AXIS_LSB_REG:
+ case BMA400_X_AXIS_MSB_REG:
+ case BMA400_Y_AXIS_LSB_REG:
+ case BMA400_Y_AXIS_MSB_REG:
+ case BMA400_Z_AXIS_LSB_REG:
+ case BMA400_Z_AXIS_MSB_REG:
+ case BMA400_SENSOR_TIME0:
+ case BMA400_SENSOR_TIME1:
+ case BMA400_SENSOR_TIME2:
+ case BMA400_EVENT_REG:
+ case BMA400_INT_STAT0_REG:
+ case BMA400_INT_STAT1_REG:
+ case BMA400_INT_STAT2_REG:
+ case BMA400_TEMP_DATA_REG:
+ case BMA400_FIFO_LENGTH0_REG:
+ case BMA400_FIFO_LENGTH1_REG:
+ case BMA400_FIFO_DATA_REG:
+ case BMA400_STEP_CNT0_REG:
+ case BMA400_STEP_CNT1_REG:
+ case BMA400_STEP_CNT3_REG:
+ case BMA400_STEP_STAT_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+const struct regmap_config bma400_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = BMA400_CMD_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .writeable_reg = bma400_is_writable_reg,
+ .volatile_reg = bma400_is_volatile_reg,
+};
+EXPORT_SYMBOL(bma400_regmap_config);
+
+static const struct iio_mount_matrix *
+bma400_accel_get_mount_matrix(const struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct bma400_data *data = iio_priv(indio_dev);
+
+ return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info bma400_ext_info[] = {
+ IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bma400_accel_get_mount_matrix),
+ { }
+};
+
+#define BMA400_ACC_CHANNEL(_axis) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .ext_info = bma400_ext_info, \
+}
+
+static const struct iio_chan_spec bma400_channels[] = {
+ BMA400_ACC_CHANNEL(X),
+ BMA400_ACC_CHANNEL(Y),
+ BMA400_ACC_CHANNEL(Z),
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+};
+
+static int bma400_get_temp_reg(struct bma400_data *data, int *val, int *val2)
+{
+ unsigned int raw_temp;
+ int host_temp;
+ int ret;
+
+ if (data->power_mode == POWER_MODE_SLEEP)
+ return -EBUSY;
+
+ ret = regmap_read(data->regmap, BMA400_TEMP_DATA_REG, &raw_temp);
+ if (ret)
+ return ret;
+
+ host_temp = sign_extend32(raw_temp, 7);
+ /*
+ * The formula for the TEMP_DATA register in the datasheet
+ * is: x * 0.5 + 23
+ */
+ *val = (host_temp >> 1) + 23;
+ *val2 = (host_temp & 0x1) * 500000;
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int bma400_get_accel_reg(struct bma400_data *data,
+ const struct iio_chan_spec *chan,
+ int *val)
+{
+ __le16 raw_accel;
+ int lsb_reg;
+ int ret;
+
+ if (data->power_mode == POWER_MODE_SLEEP)
+ return -EBUSY;
+
+ switch (chan->channel2) {
+ case IIO_MOD_X:
+ lsb_reg = BMA400_X_AXIS_LSB_REG;
+ break;
+ case IIO_MOD_Y:
+ lsb_reg = BMA400_Y_AXIS_LSB_REG;
+ break;
+ case IIO_MOD_Z:
+ lsb_reg = BMA400_Z_AXIS_LSB_REG;
+ break;
+ default:
+ dev_err(data->dev, "invalid axis channel modifier\n");
+ return -EINVAL;
+ }
+
+ /* bulk read two registers, with the base being the LSB register */
+ ret = regmap_bulk_read(data->regmap, lsb_reg, &raw_accel,
+ sizeof(raw_accel));
+ if (ret)
+ return ret;
+
+ *val = sign_extend32(le16_to_cpu(raw_accel), 11);
+ return IIO_VAL_INT;
+}
+
+static void bma400_output_data_rate_from_raw(int raw, unsigned int *val,
+ unsigned int *val2)
+{
+ *val = BMA400_ACC_ODR_MAX_HZ >> (BMA400_ACC_ODR_MAX_RAW - raw);
+ if (raw > BMA400_ACC_ODR_MIN_RAW)
+ *val2 = 0;
+ else
+ *val2 = 500000;
+}
+
+static int bma400_get_accel_output_data_rate(struct bma400_data *data)
+{
+ unsigned int val;
+ unsigned int odr;
+ int ret;
+
+ switch (data->power_mode) {
+ case POWER_MODE_LOW:
+ /*
+ * Runs at a fixed rate in low-power mode. See section 4.3
+ * in the datasheet.
+ */
+ bma400_output_data_rate_from_raw(BMA400_ACC_ODR_LP_RAW,
+ &data->sample_freq.hz,
+ &data->sample_freq.uhz);
+ return 0;
+ case POWER_MODE_NORMAL:
+ /*
+ * In normal mode the ODR can be found in the ACC_CONFIG1
+ * register.
+ */
+ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+ if (ret)
+ goto error;
+
+ odr = val & BMA400_ACC_ODR_MASK;
+ if (odr < BMA400_ACC_ODR_MIN_RAW ||
+ odr > BMA400_ACC_ODR_MAX_RAW) {
+ ret = -EINVAL;
+ goto error;
+ }
+
+ bma400_output_data_rate_from_raw(odr, &data->sample_freq.hz,
+ &data->sample_freq.uhz);
+ return 0;
+ case POWER_MODE_SLEEP:
+ data->sample_freq.hz = 0;
+ data->sample_freq.uhz = 0;
+ return 0;
+ default:
+ ret = 0;
+ goto error;
+ }
+error:
+ data->sample_freq.hz = -1;
+ data->sample_freq.uhz = -1;
+ return ret;
+}
+
+static int bma400_set_accel_output_data_rate(struct bma400_data *data,
+ int hz, int uhz)
+{
+ unsigned int idx;
+ unsigned int odr;
+ unsigned int val;
+ int ret;
+
+ if (hz >= BMA400_ACC_ODR_MIN_WHOLE_HZ) {
+ if (uhz || hz > BMA400_ACC_ODR_MAX_HZ)
+ return -EINVAL;
+
+ /* Note this works because MIN_WHOLE_HZ is odd */
+ idx = __ffs(hz);
+
+ if (hz >> idx != BMA400_ACC_ODR_MIN_WHOLE_HZ)
+ return -EINVAL;
+
+ idx += BMA400_ACC_ODR_MIN_RAW + 1;
+ } else if (hz == BMA400_ACC_ODR_MIN_HZ && uhz == 500000) {
+ idx = BMA400_ACC_ODR_MIN_RAW;
+ } else {
+ return -EINVAL;
+ }
+
+ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+ if (ret)
+ return ret;
+
+ /* preserve the range and normal mode osr */
+ odr = (~BMA400_ACC_ODR_MASK & val) | idx;
+
+ ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG, odr);
+ if (ret)
+ return ret;
+
+ bma400_output_data_rate_from_raw(idx, &data->sample_freq.hz,
+ &data->sample_freq.uhz);
+ return 0;
+}
+
+static int bma400_get_accel_oversampling_ratio(struct bma400_data *data)
+{
+ unsigned int val;
+ unsigned int osr;
+ int ret;
+
+ /*
+ * The oversampling ratio is stored in a different register
+ * based on the power-mode. In normal mode the OSR is stored
+ * in ACC_CONFIG1. In low-power mode it is stored in
+ * ACC_CONFIG0.
+ */
+ switch (data->power_mode) {
+ case POWER_MODE_LOW:
+ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG, &val);
+ if (ret) {
+ data->oversampling_ratio = -1;
+ return ret;
+ }
+
+ osr = (val & BMA400_LP_OSR_MASK) >> BMA400_LP_OSR_SHIFT;
+
+ data->oversampling_ratio = osr;
+ return 0;
+ case POWER_MODE_NORMAL:
+ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+ if (ret) {
+ data->oversampling_ratio = -1;
+ return ret;
+ }
+
+ osr = (val & BMA400_NP_OSR_MASK) >> BMA400_NP_OSR_SHIFT;
+
+ data->oversampling_ratio = osr;
+ return 0;
+ case POWER_MODE_SLEEP:
+ data->oversampling_ratio = 0;
+ return 0;
+ default:
+ data->oversampling_ratio = -1;
+ return -EINVAL;
+ }
+}
+
+static int bma400_set_accel_oversampling_ratio(struct bma400_data *data,
+ int val)
+{
+ unsigned int acc_config;
+ int ret;
+
+ if (val & ~BMA400_TWO_BITS_MASK)
+ return -EINVAL;
+
+ /*
+ * The oversampling ratio is stored in a different register
+ * based on the power-mode.
+ */
+ switch (data->power_mode) {
+ case POWER_MODE_LOW:
+ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG,
+ &acc_config);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(data->regmap, BMA400_ACC_CONFIG0_REG,
+ (acc_config & ~BMA400_LP_OSR_MASK) |
+ (val << BMA400_LP_OSR_SHIFT));
+ if (ret) {
+ dev_err(data->dev, "Failed to write out OSR\n");
+ return ret;
+ }
+
+ data->oversampling_ratio = val;
+ return 0;
+ case POWER_MODE_NORMAL:
+ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG,
+ &acc_config);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG,
+ (acc_config & ~BMA400_NP_OSR_MASK) |
+ (val << BMA400_NP_OSR_SHIFT));
+ if (ret) {
+ dev_err(data->dev, "Failed to write out OSR\n");
+ return ret;
+ }
+
+ data->oversampling_ratio = val;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+ return ret;
+}
+
+static int bma400_accel_scale_to_raw(struct bma400_data *data,
+ unsigned int val)
+{
+ int raw;
+
+ if (val == 0)
+ return -EINVAL;
+
+ /* Note this works because BMA400_SCALE_MIN is odd */
+ raw = __ffs(val);
+
+ if (val >> raw != BMA400_SCALE_MIN)
+ return -EINVAL;
+
+ return raw;
+}
+
+static int bma400_get_accel_scale(struct bma400_data *data)
+{
+ unsigned int raw_scale;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+ if (ret)
+ return ret;
+
+ raw_scale = (val & BMA400_ACC_SCALE_MASK) >> BMA400_SCALE_SHIFT;
+ if (raw_scale > BMA400_TWO_BITS_MASK)
+ return -EINVAL;
+
+ data->scale = BMA400_SCALE_MIN << raw_scale;
+
+ return 0;
+}
+
+static int bma400_set_accel_scale(struct bma400_data *data, unsigned int val)
+{
+ unsigned int acc_config;
+ int raw;
+ int ret;
+
+ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &acc_config);
+ if (ret)
+ return ret;
+
+ raw = bma400_accel_scale_to_raw(data, val);
+ if (raw < 0)
+ return raw;
+
+ ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG,
+ (acc_config & ~BMA400_ACC_SCALE_MASK) |
+ (raw << BMA400_SCALE_SHIFT));
+ if (ret)
+ return ret;
+
+ data->scale = val;
+ return 0;
+}
+
+static int bma400_get_power_mode(struct bma400_data *data)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(data->regmap, BMA400_STATUS_REG, &val);
+ if (ret) {
+ dev_err(data->dev, "Failed to read status register\n");
+ return ret;
+ }
+
+ data->power_mode = (val >> 1) & BMA400_TWO_BITS_MASK;
+ return 0;
+}
+
+static int bma400_set_power_mode(struct bma400_data *data,
+ enum bma400_power_mode mode)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG, &val);
+ if (ret)
+ return ret;
+
+ if (data->power_mode == mode)
+ return 0;
+
+ if (mode == POWER_MODE_INVALID)
+ return -EINVAL;
+
+ /* Preserve the low-power oversample ratio etc */
+ ret = regmap_write(data->regmap, BMA400_ACC_CONFIG0_REG,
+ mode | (val & ~BMA400_TWO_BITS_MASK));
+ if (ret) {
+ dev_err(data->dev, "Failed to write to power-mode\n");
+ return ret;
+ }
+
+ data->power_mode = mode;
+
+ /*
+ * Update our cached osr and odr based on the new
+ * power-mode.
+ */
+ bma400_get_accel_output_data_rate(data);
+ bma400_get_accel_oversampling_ratio(data);
+ return 0;
+}
+
+static void bma400_init_tables(void)
+{
+ int raw;
+ int i;
+
+ for (i = 0; i + 1 < ARRAY_SIZE(bma400_sample_freqs); i += 2) {
+ raw = (i / 2) + 5;
+ bma400_output_data_rate_from_raw(raw, &bma400_sample_freqs[i],
+ &bma400_sample_freqs[i + 1]);
+ }
+
+ for (i = 0; i + 1 < ARRAY_SIZE(bma400_scales); i += 2) {
+ raw = i / 2;
+ bma400_scales[i] = 0;
+ bma400_scales[i + 1] = BMA400_SCALE_MIN << raw;
+ }
+}
+
+static int bma400_init(struct bma400_data *data)
+{
+ unsigned int val;
+ int ret;
+
+ /* Try to read chip_id register. It must return 0x90. */
+ ret = regmap_read(data->regmap, BMA400_CHIP_ID_REG, &val);
+ if (ret) {
+ dev_err(data->dev, "Failed to read chip id register\n");
+ goto out;
+ }
+
+ if (val != BMA400_ID_REG_VAL) {
+ dev_err(data->dev, "Chip ID mismatch\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ data->regulators[BMA400_VDD_REGULATOR].supply = "vdd";
+ data->regulators[BMA400_VDDIO_REGULATOR].supply = "vddio";
+ ret = devm_regulator_bulk_get(data->dev,
+ ARRAY_SIZE(data->regulators),
+ data->regulators);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(data->dev,
+ "Failed to get regulators: %d\n",
+ ret);
+
+ goto out;
+ }
+ ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
+ data->regulators);
+ if (ret) {
+ dev_err(data->dev, "Failed to enable regulators: %d\n",
+ ret);
+ goto out;
+ }
+
+ ret = bma400_get_power_mode(data);
+ if (ret) {
+ dev_err(data->dev, "Failed to get the initial power-mode\n");
+ goto err_reg_disable;
+ }
+
+ if (data->power_mode != POWER_MODE_NORMAL) {
+ ret = bma400_set_power_mode(data, POWER_MODE_NORMAL);
+ if (ret) {
+ dev_err(data->dev, "Failed to wake up the device\n");
+ goto err_reg_disable;
+ }
+ /*
+ * TODO: The datasheet waits 1500us here in the example, but
+ * lists 2/ODR as the wakeup time.
+ */
+ usleep_range(1500, 2000);
+ }
+
+ bma400_init_tables();
+
+ ret = bma400_get_accel_output_data_rate(data);
+ if (ret)
+ goto err_reg_disable;
+
+ ret = bma400_get_accel_oversampling_ratio(data);
+ if (ret)
+ goto err_reg_disable;
+
+ ret = bma400_get_accel_scale(data);
+ if (ret)
+ goto err_reg_disable;
+
+ /*
+ * Once the interrupt engine is supported we might use the
+ * data_src_reg, but for now ensure this is set to the
+ * variable ODR filter selectable by the sample frequency
+ * channel.
+ */
+ return regmap_write(data->regmap, BMA400_ACC_CONFIG2_REG, 0x00);
+
+err_reg_disable:
+ regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+ data->regulators);
+out:
+ return ret;
+}
+
+static int bma400_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct bma400_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ mutex_lock(&data->mutex);
+ ret = bma400_get_temp_reg(data, val, val2);
+ mutex_unlock(&data->mutex);
+ return ret;
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&data->mutex);
+ ret = bma400_get_accel_reg(data, chan, val);
+ mutex_unlock(&data->mutex);
+ return ret;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ switch (chan->type) {
+ case IIO_ACCEL:
+ if (data->sample_freq.hz < 0)
+ return -EINVAL;
+
+ *val = data->sample_freq.hz;
+ *val2 = data->sample_freq.uhz;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_TEMP:
+ /*
+ * Runs at a fixed sampling frequency. See Section 4.4
+ * of the datasheet.
+ */
+ *val = 6;
+ *val2 = 250000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = data->scale;
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ /*
+ * TODO: We could avoid this logic and returning -EINVAL here if
+ * we set both the low-power and normal mode OSR registers when
+ * we configure the device.
+ */
+ if (data->oversampling_ratio < 0)
+ return -EINVAL;
+
+ *val = data->oversampling_ratio;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bma400_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ *vals = bma400_scales;
+ *length = ARRAY_SIZE(bma400_scales);
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *type = IIO_VAL_INT;
+ *vals = bma400_osr_range;
+ *length = ARRAY_SIZE(bma400_osr_range);
+ return IIO_AVAIL_RANGE;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ *vals = bma400_sample_freqs;
+ *length = ARRAY_SIZE(bma400_sample_freqs);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bma400_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2,
+ long mask)
+{
+ struct bma400_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ /*
+ * The sample frequency is readonly for the temperature
+ * register and a fixed value in low-power mode.
+ */
+ if (chan->type != IIO_ACCEL)
+ return -EINVAL;
+
+ mutex_lock(&data->mutex);
+ ret = bma400_set_accel_output_data_rate(data, val, val2);
+ mutex_unlock(&data->mutex);
+ return ret;
+ case IIO_CHAN_INFO_SCALE:
+ if (val != 0 || val2 > BMA400_SCALE_MAX)
+ return -EINVAL;
+
+ mutex_lock(&data->mutex);
+ ret = bma400_set_accel_scale(data, val2);
+ mutex_unlock(&data->mutex);
+ return ret;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ mutex_lock(&data->mutex);
+ ret = bma400_set_accel_oversampling_ratio(data, val);
+ mutex_unlock(&data->mutex);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bma400_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info bma400_info = {
+ .read_raw = bma400_read_raw,
+ .read_avail = bma400_read_avail,
+ .write_raw = bma400_write_raw,
+ .write_raw_get_fmt = bma400_write_raw_get_fmt,
+};
+
+int bma400_probe(struct device *dev, struct regmap *regmap, const char *name)
+{
+ struct iio_dev *indio_dev;
+ struct bma400_data *data;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->regmap = regmap;
+ data->dev = dev;
+
+ ret = bma400_init(data);
+ if (ret)
+ return ret;
+
+ ret = iio_read_mount_matrix(dev, "mount-matrix", &data->orientation);
+ if (ret)
+ return ret;
+
+ mutex_init(&data->mutex);
+ indio_dev->dev.parent = dev;
+ indio_dev->name = name;
+ indio_dev->info = &bma400_info;
+ indio_dev->channels = bma400_channels;
+ indio_dev->num_channels = ARRAY_SIZE(bma400_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ dev_set_drvdata(dev, indio_dev);
+
+ return iio_device_register(indio_dev);
+}
+EXPORT_SYMBOL(bma400_probe);
+
+int bma400_remove(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct bma400_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = bma400_set_power_mode(data, POWER_MODE_SLEEP);
+ mutex_unlock(&data->mutex);
+
+ regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+ data->regulators);
+
+ iio_device_unregister(indio_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL(bma400_remove);
+
+MODULE_AUTHOR("Dan Robertson <dan@dlrobertson.com>");
+MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/accel/bma400_i2c.c b/drivers/iio/accel/bma400_i2c.c
new file mode 100644
index 000000000000..9dcb7cc9996e
--- /dev/null
+++ b/drivers/iio/accel/bma400_i2c.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C IIO driver for Bosch BMA400 triaxial acceleration sensor.
+ *
+ * Copyright 2019 Dan Robertson <dan@dlrobertson.com>
+ *
+ * I2C address is either 0x14 or 0x15 depending on SDO
+ */
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bma400.h"
+
+static int bma400_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(client, &bma400_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "failed to create regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ return bma400_probe(&client->dev, regmap, id->name);
+}
+
+static int bma400_i2c_remove(struct i2c_client *client)
+{
+ return bma400_remove(&client->dev);
+}
+
+static const struct i2c_device_id bma400_i2c_ids[] = {
+ { "bma400", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bma400_i2c_ids);
+
+static const struct of_device_id bma400_of_i2c_match[] = {
+ { .compatible = "bosch,bma400" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bma400_of_i2c_match);
+
+static struct i2c_driver bma400_i2c_driver = {
+ .driver = {
+ .name = "bma400",
+ .of_match_table = bma400_of_i2c_match,
+ },
+ .probe = bma400_i2c_probe,
+ .remove = bma400_i2c_remove,
+ .id_table = bma400_i2c_ids,
+};
+
+module_i2c_driver(bma400_i2c_driver);
+
+MODULE_AUTHOR("Dan Robertson <dan@dlrobertson.com>");
+MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor (I2C)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index af09943f38c9..5b13e293cade 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -64,7 +64,7 @@ enum st_accel_type {
* struct st_sensors_platform_data - default accel platform data
* @drdy_int_pin: default accel DRDY is available on INT1 pin.
*/
-static const struct st_sensors_platform_data default_accel_pdata = {
+static __maybe_unused const struct st_sensors_platform_data default_accel_pdata = {
.drdy_int_pin = 1,
};
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 50fa0fc32baa..0f4aef5448e7 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -119,8 +119,6 @@ static const struct acpi_device_id st_accel_acpi_match[] = {
{ },
};
MODULE_DEVICE_TABLE(acpi, st_accel_acpi_match);
-#else
-#define st_accel_acpi_match NULL
#endif
static const struct i2c_device_id st_accel_id_table[] = {
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 5d8540b7b427..82e33082958c 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -21,6 +21,13 @@ config AD_SIGMA_DELTA
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
+config AD7091R5
+ tristate "Analog Devices AD7091R5 ADC Driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say yes here to build support for Analog Devices AD7091R-5 ADC.
+
config AD7124
tristate "Analog Devices AD7124 and similar sigma-delta ADCs driver"
depends on SPI_MASTER
@@ -523,6 +530,16 @@ config LTC2485
To compile this driver as a module, choose M here: the module will be
called ltc2485.
+config LTC2496
+ tristate "Linear Technology LTC2496 ADC driver"
+ depends on SPI
+ help
+ Say yes here to build support for Linear Technology LTC2496
+ 16-Bit 8-/16-Channel Delta Sigma ADC.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ltc2496.
+
config LTC2497
tristate "Linear Technology LTC2497 ADC driver"
depends on I2C
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index a1f1fbec0f87..919228900df9 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -6,6 +6,7 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
+obj-$(CONFIG_AD7091R5) += ad7091r5.o ad7091r-base.o
obj-$(CONFIG_AD7124) += ad7124.o
obj-$(CONFIG_AD7266) += ad7266.o
obj-$(CONFIG_AD7291) += ad7291.o
@@ -50,7 +51,8 @@ obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
obj-$(CONFIG_LTC2471) += ltc2471.o
obj-$(CONFIG_LTC2485) += ltc2485.o
-obj-$(CONFIG_LTC2497) += ltc2497.o
+obj-$(CONFIG_LTC2496) += ltc2496.o ltc2497-core.o
+obj-$(CONFIG_LTC2497) += ltc2497.o ltc2497-core.o
obj-$(CONFIG_MAX1027) += max1027.o
obj-$(CONFIG_MAX11100) += max11100.o
obj-$(CONFIG_MAX1118) += max1118.o
diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
new file mode 100644
index 000000000000..33c40357bd5e
--- /dev/null
+++ b/drivers/iio/adc/ad7091r-base.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7091RX Analog to Digital converter driver
+ *
+ * Copyright 2014-2019 Analog Devices Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include "ad7091r-base.h"
+
+#define AD7091R_REG_RESULT 0
+#define AD7091R_REG_CHANNEL 1
+#define AD7091R_REG_CONF 2
+#define AD7091R_REG_ALERT 3
+#define AD7091R_REG_CH_LOW_LIMIT(ch) ((ch) * 3 + 4)
+#define AD7091R_REG_CH_HIGH_LIMIT(ch) ((ch) * 3 + 5)
+#define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6)
+
+/* AD7091R_REG_RESULT */
+#define AD7091R_REG_RESULT_CH_ID(x) (((x) >> 13) & 0x3)
+#define AD7091R_REG_RESULT_CONV_RESULT(x) ((x) & 0xfff)
+
+/* AD7091R_REG_CONF */
+#define AD7091R_REG_CONF_AUTO BIT(8)
+#define AD7091R_REG_CONF_CMD BIT(10)
+
+#define AD7091R_REG_CONF_MODE_MASK \
+ (AD7091R_REG_CONF_AUTO | AD7091R_REG_CONF_CMD)
+
+enum ad7091r_mode {
+ AD7091R_MODE_SAMPLE,
+ AD7091R_MODE_COMMAND,
+ AD7091R_MODE_AUTOCYCLE,
+};
+
+struct ad7091r_state {
+ struct device *dev;
+ struct regmap *map;
+ struct regulator *vref;
+ const struct ad7091r_chip_info *chip_info;
+ enum ad7091r_mode mode;
+ struct mutex lock; /*lock to prevent concurent reads */
+};
+
+static int ad7091r_set_mode(struct ad7091r_state *st, enum ad7091r_mode mode)
+{
+ int ret, conf;
+
+ switch (mode) {
+ case AD7091R_MODE_SAMPLE:
+ conf = 0;
+ break;
+ case AD7091R_MODE_COMMAND:
+ conf = AD7091R_REG_CONF_CMD;
+ break;
+ case AD7091R_MODE_AUTOCYCLE:
+ conf = AD7091R_REG_CONF_AUTO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
+ AD7091R_REG_CONF_MODE_MASK, conf);
+ if (ret)
+ return ret;
+
+ st->mode = mode;
+
+ return 0;
+}
+
+static int ad7091r_set_channel(struct ad7091r_state *st, unsigned int channel)
+{
+ unsigned int dummy;
+ int ret;
+
+ /* AD7091R_REG_CHANNEL specified which channels to be converted */
+ ret = regmap_write(st->map, AD7091R_REG_CHANNEL,
+ BIT(channel) | (BIT(channel) << 8));
+ if (ret)
+ return ret;
+
+ /*
+ * There is a latency of one conversion before the channel conversion
+ * sequence is updated
+ */
+ return regmap_read(st->map, AD7091R_REG_RESULT, &dummy);
+}
+
+static int ad7091r_read_one(struct iio_dev *iio_dev,
+ unsigned int channel, unsigned int *read_val)
+{
+ struct ad7091r_state *st = iio_priv(iio_dev);
+ unsigned int val;
+ int ret;
+
+ ret = ad7091r_set_channel(st, channel);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(st->map, AD7091R_REG_RESULT, &val);
+ if (ret)
+ return ret;
+
+ if (AD7091R_REG_RESULT_CH_ID(val) != channel)
+ return -EIO;
+
+ *read_val = AD7091R_REG_RESULT_CONV_RESULT(val);
+
+ return 0;
+}
+
+static int ad7091r_read_raw(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long m)
+{
+ struct ad7091r_state *st = iio_priv(iio_dev);
+ unsigned int read_val;
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ if (st->mode != AD7091R_MODE_COMMAND) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ ret = ad7091r_read_one(iio_dev, chan->channel, &read_val);
+ if (ret)
+ goto unlock;
+
+ *val = read_val;
+ ret = IIO_VAL_INT;
+ break;
+
+ case IIO_CHAN_INFO_SCALE:
+ if (st->vref) {
+ ret = regulator_get_voltage(st->vref);
+ if (ret < 0)
+ goto unlock;
+
+ *val = ret / 1000;
+ } else {
+ *val = st->chip_info->vref_mV;
+ }
+
+ *val2 = chan->scan_type.realbits;
+ ret = IIO_VAL_FRACTIONAL_LOG2;
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+unlock:
+ mutex_unlock(&st->lock);
+ return ret;
+}
+
+static const struct iio_info ad7091r_info = {
+ .read_raw = ad7091r_read_raw,
+};
+
+static irqreturn_t ad7091r_event_handler(int irq, void *private)
+{
+ struct ad7091r_state *st = (struct ad7091r_state *) private;
+ struct iio_dev *iio_dev = dev_get_drvdata(st->dev);
+ unsigned int i, read_val;
+ int ret;
+ s64 timestamp = iio_get_time_ns(iio_dev);
+
+ ret = regmap_read(st->map, AD7091R_REG_ALERT, &read_val);
+ if (ret)
+ return IRQ_HANDLED;
+
+ for (i = 0; i < st->chip_info->num_channels; i++) {
+ if (read_val & BIT(i * 2))
+ iio_push_event(iio_dev,
+ IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, i,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_RISING), timestamp);
+ if (read_val & BIT(i * 2 + 1))
+ iio_push_event(iio_dev,
+ IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, i,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_FALLING), timestamp);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void ad7091r_remove(void *data)
+{
+ struct ad7091r_state *st = data;
+
+ regulator_disable(st->vref);
+}
+
+int ad7091r_probe(struct device *dev, const char *name,
+ const struct ad7091r_chip_info *chip_info,
+ struct regmap *map, int irq)
+{
+ struct iio_dev *iio_dev;
+ struct ad7091r_state *st;
+ int ret;
+
+ iio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+ if (!iio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(iio_dev);
+ st->dev = dev;
+ st->chip_info = chip_info;
+ st->map = map;
+
+ iio_dev->dev.parent = dev;
+ iio_dev->name = name;
+ iio_dev->info = &ad7091r_info;
+ iio_dev->modes = INDIO_DIRECT_MODE;
+
+ iio_dev->num_channels = chip_info->num_channels;
+ iio_dev->channels = chip_info->channels;
+
+ if (irq) {
+ ret = devm_request_threaded_irq(dev, irq, NULL,
+ ad7091r_event_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, st);
+ if (ret)
+ return ret;
+ }
+
+ st->vref = devm_regulator_get_optional(dev, "vref");
+ if (IS_ERR(st->vref)) {
+ if (PTR_ERR(st->vref) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ st->vref = NULL;
+ } else {
+ ret = regulator_enable(st->vref);
+ if (ret)
+ return ret;
+ ret = devm_add_action_or_reset(dev, ad7091r_remove, st);
+ if (ret)
+ return ret;
+ }
+
+ /* Use command mode by default to convert only desired channels*/
+ ret = ad7091r_set_mode(st, AD7091R_MODE_COMMAND);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(dev, iio_dev);
+}
+EXPORT_SYMBOL_GPL(ad7091r_probe);
+
+static bool ad7091r_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AD7091R_REG_RESULT:
+ case AD7091R_REG_ALERT:
+ return false;
+ default:
+ return true;
+ }
+}
+
+static bool ad7091r_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AD7091R_REG_RESULT:
+ case AD7091R_REG_ALERT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+const struct regmap_config ad7091r_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .writeable_reg = ad7091r_writeable_reg,
+ .volatile_reg = ad7091r_volatile_reg,
+};
+EXPORT_SYMBOL_GPL(ad7091r_regmap_config);
+
+MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7091Rx multi-channel converters");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
new file mode 100644
index 000000000000..509748aef9b1
--- /dev/null
+++ b/drivers/iio/adc/ad7091r-base.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * AD7091RX Analog to Digital converter driver
+ *
+ * Copyright 2014-2019 Analog Devices Inc.
+ */
+
+#ifndef __DRIVERS_IIO_ADC_AD7091R_BASE_H__
+#define __DRIVERS_IIO_ADC_AD7091R_BASE_H__
+
+struct device;
+struct ad7091r_state;
+
+struct ad7091r_chip_info {
+ unsigned int num_channels;
+ const struct iio_chan_spec *channels;
+ unsigned int vref_mV;
+};
+
+extern const struct regmap_config ad7091r_regmap_config;
+
+int ad7091r_probe(struct device *dev, const char *name,
+ const struct ad7091r_chip_info *chip_info,
+ struct regmap *map, int irq);
+
+#endif /* __DRIVERS_IIO_ADC_AD7091R_BASE_H__ */
diff --git a/drivers/iio/adc/ad7091r5.c b/drivers/iio/adc/ad7091r5.c
new file mode 100644
index 000000000000..9665679c3ea6
--- /dev/null
+++ b/drivers/iio/adc/ad7091r5.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7091R5 Analog to Digital converter driver
+ *
+ * Copyright 2014-2019 Analog Devices Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "ad7091r-base.h"
+
+static const struct iio_event_spec ad7091r5_events[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ },
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ },
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_EITHER,
+ .mask_separate = BIT(IIO_EV_INFO_HYSTERESIS),
+ },
+};
+
+#define AD7091R_CHANNEL(idx, bits, ev, num_ev) { \
+ .type = IIO_VOLTAGE, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .indexed = 1, \
+ .channel = idx, \
+ .event_spec = ev, \
+ .num_event_specs = num_ev, \
+ .scan_type.storagebits = 16, \
+ .scan_type.realbits = bits, \
+}
+static const struct iio_chan_spec ad7091r5_channels_irq[] = {
+ AD7091R_CHANNEL(0, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
+ AD7091R_CHANNEL(1, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
+ AD7091R_CHANNEL(2, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
+ AD7091R_CHANNEL(3, 12, ad7091r5_events, ARRAY_SIZE(ad7091r5_events)),
+};
+
+static const struct iio_chan_spec ad7091r5_channels_noirq[] = {
+ AD7091R_CHANNEL(0, 12, NULL, 0),
+ AD7091R_CHANNEL(1, 12, NULL, 0),
+ AD7091R_CHANNEL(2, 12, NULL, 0),
+ AD7091R_CHANNEL(3, 12, NULL, 0),
+};
+
+static const struct ad7091r_chip_info ad7091r5_chip_info_irq = {
+ .channels = ad7091r5_channels_irq,
+ .num_channels = ARRAY_SIZE(ad7091r5_channels_irq),
+ .vref_mV = 2500,
+};
+
+static const struct ad7091r_chip_info ad7091r5_chip_info_noirq = {
+ .channels = ad7091r5_channels_noirq,
+ .num_channels = ARRAY_SIZE(ad7091r5_channels_noirq),
+ .vref_mV = 2500,
+};
+
+static int ad7091r5_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ const struct ad7091r_chip_info *chip_info;
+ struct regmap *map = devm_regmap_init_i2c(i2c, &ad7091r_regmap_config);
+
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ if (i2c->irq)
+ chip_info = &ad7091r5_chip_info_irq;
+ else
+ chip_info = &ad7091r5_chip_info_noirq;
+
+ return ad7091r_probe(&i2c->dev, id->name, chip_info, map, i2c->irq);
+}
+
+static const struct of_device_id ad7091r5_dt_ids[] = {
+ { .compatible = "adi,ad7091r5" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ad7091r5_dt_ids);
+
+static const struct i2c_device_id ad7091r5_i2c_ids[] = {
+ {"ad7091r5", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ad7091r5_i2c_ids);
+
+static struct i2c_driver ad7091r5_driver = {
+ .driver = {
+ .name = "ad7091r5",
+ .of_match_table = ad7091r5_dt_ids,
+ },
+ .probe = ad7091r5_i2c_probe,
+ .id_table = ad7091r5_i2c_ids,
+};
+module_i2c_driver(ad7091r5_driver);
+
+MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7091R5 multi-channel ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index c31b8eabb894..c8524f098883 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -11,7 +11,7 @@
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -34,7 +34,7 @@ struct ad7266_state {
enum ad7266_range range;
enum ad7266_mode mode;
bool fixed_addr;
- struct gpio gpios[3];
+ struct gpio_desc *gpios[3];
/*
* DMA (thus cache coherency maintenance) requires the
@@ -117,7 +117,7 @@ static void ad7266_select_input(struct ad7266_state *st, unsigned int nr)
}
for (i = 0; i < 3; ++i)
- gpio_set_value(st->gpios[i].gpio, (bool)(nr & BIT(i)));
+ gpiod_set_value(st->gpios[i], (bool)(nr & BIT(i)));
}
static int ad7266_update_scan_mode(struct iio_dev *indio_dev,
@@ -376,7 +376,7 @@ static void ad7266_init_channels(struct iio_dev *indio_dev)
}
static const char * const ad7266_gpio_labels[] = {
- "AD0", "AD1", "AD2",
+ "ad0", "ad1", "ad2",
};
static int ad7266_probe(struct spi_device *spi)
@@ -419,14 +419,14 @@ static int ad7266_probe(struct spi_device *spi)
if (!st->fixed_addr) {
for (i = 0; i < ARRAY_SIZE(st->gpios); ++i) {
- st->gpios[i].gpio = pdata->addr_gpios[i];
- st->gpios[i].flags = GPIOF_OUT_INIT_LOW;
- st->gpios[i].label = ad7266_gpio_labels[i];
+ st->gpios[i] = devm_gpiod_get(&spi->dev,
+ ad7266_gpio_labels[i],
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->gpios[i])) {
+ ret = PTR_ERR(st->gpios[i]);
+ goto error_disable_reg;
+ }
}
- ret = gpio_request_array(st->gpios,
- ARRAY_SIZE(st->gpios));
- if (ret)
- goto error_disable_reg;
}
} else {
st->fixed_addr = true;
@@ -465,7 +465,7 @@ static int ad7266_probe(struct spi_device *spi)
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
&ad7266_trigger_handler, &iio_triggered_buffer_setup_ops);
if (ret)
- goto error_free_gpios;
+ goto error_disable_reg;
ret = iio_device_register(indio_dev);
if (ret)
@@ -475,9 +475,6 @@ static int ad7266_probe(struct spi_device *spi)
error_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
-error_free_gpios:
- if (!st->fixed_addr)
- gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios));
error_disable_reg:
if (!IS_ERR(st->reg))
regulator_disable(st->reg);
@@ -492,8 +489,6 @@ static int ad7266_remove(struct spi_device *spi)
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
- if (!st->fixed_addr)
- gpio_free_array(st->gpios, ARRAY_SIZE(st->gpios));
if (!IS_ERR(st->reg))
regulator_disable(st->reg);
diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c
index 6223043e432b..c6a3428e950a 100644
--- a/drivers/iio/adc/ad7887.c
+++ b/drivers/iio/adc/ad7887.c
@@ -43,11 +43,17 @@ enum ad7887_channels {
/**
* struct ad7887_chip_info - chip specifc information
* @int_vref_mv: the internal reference voltage
- * @channel: channel specification
+ * @channels: channels specification
+ * @num_channels: number of channels
+ * @dual_channels: channels specification in dual mode
+ * @num_dual_channels: number of channels in dual mode
*/
struct ad7887_chip_info {
u16 int_vref_mv;
- struct iio_chan_spec channel[3];
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+ const struct iio_chan_spec *dual_channels;
+ unsigned int num_dual_channels;
};
struct ad7887_state {
@@ -183,45 +189,43 @@ static int ad7887_read_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
+#define AD7887_CHANNEL(x) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (x), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .address = (x), \
+ .scan_index = (x), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .shift = 0, \
+ .endianness = IIO_BE, \
+ }, \
+}
+
+static const struct iio_chan_spec ad7887_channels[] = {
+ AD7887_CHANNEL(0),
+ IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct iio_chan_spec ad7887_dual_channels[] = {
+ AD7887_CHANNEL(0),
+ AD7887_CHANNEL(1),
+ IIO_CHAN_SOFT_TIMESTAMP(2),
+};
static const struct ad7887_chip_info ad7887_chip_info_tbl[] = {
/*
* More devices added in future
*/
[ID_AD7887] = {
- .channel[0] = {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 1,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
- .address = 1,
- .scan_index = 1,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- .shift = 0,
- .endianness = IIO_BE,
- },
- },
- .channel[1] = {
- .type = IIO_VOLTAGE,
- .indexed = 1,
- .channel = 0,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
- .address = 0,
- .scan_index = 0,
- .scan_type = {
- .sign = 'u',
- .realbits = 12,
- .storagebits = 16,
- .shift = 0,
- .endianness = IIO_BE,
- },
- },
- .channel[2] = IIO_CHAN_SOFT_TIMESTAMP(2),
+ .channels = ad7887_channels,
+ .num_channels = ARRAY_SIZE(ad7887_channels),
+ .dual_channels = ad7887_dual_channels,
+ .num_dual_channels = ARRAY_SIZE(ad7887_dual_channels),
.int_vref_mv = 2500,
},
};
@@ -306,11 +310,11 @@ static int ad7887_probe(struct spi_device *spi)
spi_message_init(&st->msg[AD7887_CH1]);
spi_message_add_tail(&st->xfer[3], &st->msg[AD7887_CH1]);
- indio_dev->channels = st->chip_info->channel;
- indio_dev->num_channels = 3;
+ indio_dev->channels = st->chip_info->dual_channels;
+ indio_dev->num_channels = st->chip_info->num_dual_channels;
} else {
- indio_dev->channels = &st->chip_info->channel[1];
- indio_dev->num_channels = 2;
+ indio_dev->channels = st->chip_info->channels;
+ indio_dev->num_channels = st->chip_info->num_channels;
}
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c
index 3212eb4c0f25..1d124c87c6ac 100644
--- a/drivers/iio/adc/ad7923.c
+++ b/drivers/iio/adc/ad7923.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * AD7904/AD7914/AD7923/AD7924 SPI ADC driver
+ * AD7904/AD7914/AD7923/AD7924/AD7908/AD7918/AD7928 SPI ADC driver
*
* Copyright 2011 Analog Devices Inc (from AD7923 Driver)
* Copyright 2012 CS Systemes d'Information
@@ -29,15 +29,10 @@
#define AD7923_PM_MODE_AS (1) /* auto shutdown */
#define AD7923_PM_MODE_FS (2) /* full shutdown */
#define AD7923_PM_MODE_OPS (3) /* normal operation */
-#define AD7923_CHANNEL_0 (0) /* analog input 0 */
-#define AD7923_CHANNEL_1 (1) /* analog input 1 */
-#define AD7923_CHANNEL_2 (2) /* analog input 2 */
-#define AD7923_CHANNEL_3 (3) /* analog input 3 */
#define AD7923_SEQUENCE_OFF (0) /* no sequence fonction */
#define AD7923_SEQUENCE_PROTECT (2) /* no interrupt write cycle */
#define AD7923_SEQUENCE_ON (3) /* continuous sequence */
-#define AD7923_MAX_CHAN 4
#define AD7923_PM_MODE_WRITE(mode) ((mode) << 4) /* write mode */
#define AD7923_CHANNEL_WRITE(channel) ((channel) << 6) /* write channel */
@@ -78,6 +73,9 @@ enum ad7923_id {
AD7904,
AD7914,
AD7924,
+ AD7908,
+ AD7918,
+ AD7928
};
#define AD7923_V_CHAN(index, bits) \
@@ -106,9 +104,25 @@ const struct iio_chan_spec name ## _channels[] = { \
IIO_CHAN_SOFT_TIMESTAMP(4), \
}
+#define DECLARE_AD7908_CHANNELS(name, bits) \
+const struct iio_chan_spec name ## _channels[] = { \
+ AD7923_V_CHAN(0, bits), \
+ AD7923_V_CHAN(1, bits), \
+ AD7923_V_CHAN(2, bits), \
+ AD7923_V_CHAN(3, bits), \
+ AD7923_V_CHAN(4, bits), \
+ AD7923_V_CHAN(5, bits), \
+ AD7923_V_CHAN(6, bits), \
+ AD7923_V_CHAN(7, bits), \
+ IIO_CHAN_SOFT_TIMESTAMP(8), \
+}
+
static DECLARE_AD7923_CHANNELS(ad7904, 8);
static DECLARE_AD7923_CHANNELS(ad7914, 10);
static DECLARE_AD7923_CHANNELS(ad7924, 12);
+static DECLARE_AD7908_CHANNELS(ad7908, 8);
+static DECLARE_AD7908_CHANNELS(ad7918, 10);
+static DECLARE_AD7908_CHANNELS(ad7928, 12);
static const struct ad7923_chip_info ad7923_chip_info[] = {
[AD7904] = {
@@ -123,6 +137,18 @@ static const struct ad7923_chip_info ad7923_chip_info[] = {
.channels = ad7924_channels,
.num_channels = ARRAY_SIZE(ad7924_channels),
},
+ [AD7908] = {
+ .channels = ad7908_channels,
+ .num_channels = ARRAY_SIZE(ad7908_channels),
+ },
+ [AD7918] = {
+ .channels = ad7918_channels,
+ .num_channels = ARRAY_SIZE(ad7918_channels),
+ },
+ [AD7928] = {
+ .channels = ad7928_channels,
+ .num_channels = ARRAY_SIZE(ad7928_channels),
+ },
};
/**
@@ -135,7 +161,11 @@ static int ad7923_update_scan_mode(struct iio_dev *indio_dev,
int i, cmd, len;
len = 0;
- for_each_set_bit(i, active_scan_mask, AD7923_MAX_CHAN) {
+ /*
+ * For this driver the last channel is always the software timestamp so
+ * skip that one.
+ */
+ for_each_set_bit(i, active_scan_mask, indio_dev->num_channels - 1) {
cmd = AD7923_WRITE_CR | AD7923_CHANNEL_WRITE(i) |
AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) |
st->settings;
@@ -188,7 +218,7 @@ done:
return IRQ_HANDLED;
}
-static int ad7923_scan_direct(struct ad7923_state *st, unsigned ch)
+static int ad7923_scan_direct(struct ad7923_state *st, unsigned int ch)
{
int ret, cmd;
@@ -348,13 +378,29 @@ static const struct spi_device_id ad7923_id[] = {
{"ad7914", AD7914},
{"ad7923", AD7924},
{"ad7924", AD7924},
+ {"ad7908", AD7908},
+ {"ad7918", AD7918},
+ {"ad7928", AD7928},
{}
};
MODULE_DEVICE_TABLE(spi, ad7923_id);
+static const struct of_device_id ad7923_of_match[] = {
+ { .compatible = "adi,ad7904", },
+ { .compatible = "adi,ad7914", },
+ { .compatible = "adi,ad7923", },
+ { .compatible = "adi,ad7924", },
+ { .compatible = "adi,ad7908", },
+ { .compatible = "adi,ad7918", },
+ { .compatible = "adi,ad7928", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ad7923_of_match);
+
static struct spi_driver ad7923_driver = {
.driver = {
.name = "ad7923",
+ .of_match_table = ad7923_of_match,
},
.probe = ad7923_probe,
.remove = ad7923_remove,
@@ -364,5 +410,5 @@ module_spi_driver(ad7923_driver);
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
MODULE_AUTHOR("Patrick Vasseur <patrick.vasseur@c-s.fr>");
-MODULE_DESCRIPTION("Analog Devices AD7904/AD7914/AD7923/AD7924 ADC");
+MODULE_DESCRIPTION("Analog Devices AD7923 and similar ADC");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index f658012baad8..ef013af1aec0 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -167,6 +167,21 @@ static int ad799x_read_config(struct ad799x_state *st)
}
}
+static int ad799x_update_config(struct ad799x_state *st, u16 config)
+{
+ int ret;
+
+ ret = ad799x_write_config(st, config);
+ if (ret < 0)
+ return ret;
+ ret = ad799x_read_config(st);
+ if (ret < 0)
+ return ret;
+ st->config = ret;
+
+ return 0;
+}
+
/**
* ad799x_trigger_handler() bh of trigger launched polling to ring buffer
*
@@ -808,13 +823,9 @@ static int ad799x_probe(struct i2c_client *client,
indio_dev->channels = st->chip_config->channel;
indio_dev->num_channels = chip_info->num_channels;
- ret = ad799x_write_config(st, st->chip_config->default_config);
- if (ret < 0)
- goto error_disable_vref;
- ret = ad799x_read_config(st);
- if (ret < 0)
+ ret = ad799x_update_config(st, st->chip_config->default_config);
+ if (ret)
goto error_disable_vref;
- st->config = ret;
ret = iio_triggered_buffer_setup(indio_dev, NULL,
&ad799x_trigger_handler, NULL);
@@ -864,6 +875,48 @@ static int ad799x_remove(struct i2c_client *client)
return 0;
}
+static int __maybe_unused ad799x_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ regulator_disable(st->vref);
+ regulator_disable(st->reg);
+
+ return 0;
+}
+
+static int __maybe_unused ad799x_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct ad799x_state *st = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_enable(st->reg);
+ if (ret) {
+ dev_err(dev, "Unable to enable vcc regulator\n");
+ return ret;
+ }
+ ret = regulator_enable(st->vref);
+ if (ret) {
+ regulator_disable(st->reg);
+ dev_err(dev, "Unable to enable vref regulator\n");
+ return ret;
+ }
+
+ /* resync config */
+ ret = ad799x_update_config(st, st->config);
+ if (ret) {
+ regulator_disable(st->vref);
+ regulator_disable(st->reg);
+ return ret;
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ad799x_pm_ops, ad799x_suspend, ad799x_resume);
+
static const struct i2c_device_id ad799x_id[] = {
{ "ad7991", ad7991 },
{ "ad7995", ad7995 },
@@ -881,6 +934,7 @@ MODULE_DEVICE_TABLE(i2c, ad799x_id);
static struct i2c_driver ad799x_driver = {
.driver = {
.name = "ad799x",
+ .pm = &ad799x_pm_ops,
},
.probe = ad799x_probe,
.remove = ad799x_remove,
diff --git a/drivers/iio/adc/ltc2496.c b/drivers/iio/adc/ltc2496.c
new file mode 100644
index 000000000000..88a30156a849
--- /dev/null
+++ b/drivers/iio/adc/ltc2496.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ltc2496.c - Driver for Analog Devices/Linear Technology LTC2496 ADC
+ *
+ * Based on ltc2497.c which has
+ * Copyright (C) 2017 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ *
+ * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/2496fc.pdf
+ */
+
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "ltc2497.h"
+
+struct ltc2496_driverdata {
+ /* this must be the first member */
+ struct ltc2497core_driverdata common_ddata;
+ struct spi_device *spi;
+
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ */
+ unsigned char rxbuf[3] ____cacheline_aligned;
+ unsigned char txbuf[3];
+};
+
+static int ltc2496_result_and_measure(struct ltc2497core_driverdata *ddata,
+ u8 address, int *val)
+{
+ struct ltc2496_driverdata *st =
+ container_of(ddata, struct ltc2496_driverdata, common_ddata);
+ struct spi_transfer t = {
+ .tx_buf = st->txbuf,
+ .rx_buf = st->rxbuf,
+ .len = sizeof(st->txbuf),
+ };
+ int ret;
+
+ st->txbuf[0] = LTC2497_ENABLE | address;
+
+ ret = spi_sync_transfer(st->spi, &t, 1);
+ if (ret < 0) {
+ dev_err(&st->spi->dev, "spi_sync_transfer failed: %pe\n",
+ ERR_PTR(ret));
+ return ret;
+ }
+
+ if (val)
+ *val = ((st->rxbuf[0] & 0x3f) << 12 |
+ st->rxbuf[1] << 4 | st->rxbuf[2] >> 4) -
+ (1 << 17);
+
+ return 0;
+}
+
+static int ltc2496_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct ltc2496_driverdata *st;
+ struct device *dev = &spi->dev;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ spi_set_drvdata(spi, indio_dev);
+ st->spi = spi;
+ st->common_ddata.result_and_measure = ltc2496_result_and_measure;
+
+ return ltc2497core_probe(dev, indio_dev);
+}
+
+static int ltc2496_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+ ltc2497core_remove(indio_dev);
+
+ return 0;
+}
+
+static const struct of_device_id ltc2496_of_match[] = {
+ { .compatible = "lltc,ltc2496", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ltc2496_of_match);
+
+static struct spi_driver ltc2496_driver = {
+ .driver = {
+ .name = "ltc2496",
+ .of_match_table = of_match_ptr(ltc2496_of_match),
+ },
+ .probe = ltc2496_probe,
+ .remove = ltc2496_remove,
+};
+module_spi_driver(ltc2496_driver);
+
+MODULE_AUTHOR("Uwe Kleine-König <u.kleine-könig@pengutronix.de>");
+MODULE_DESCRIPTION("Linear Technology LTC2496 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ltc2497-core.c b/drivers/iio/adc/ltc2497-core.c
new file mode 100644
index 000000000000..f5f7039caacc
--- /dev/null
+++ b/drivers/iio/adc/ltc2497-core.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ltc2497-core.c - Common code for Analog Devices/Linear Technology
+ * LTC2496 and LTC2497 ADCs
+ *
+ * Copyright (C) 2017 Analog Devices Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+
+#include "ltc2497.h"
+
+#define LTC2497_SGL BIT(4)
+#define LTC2497_DIFF 0
+#define LTC2497_SIGN BIT(3)
+
+static int ltc2497core_wait_conv(struct ltc2497core_driverdata *ddata)
+{
+ s64 time_elapsed;
+
+ time_elapsed = ktime_ms_delta(ktime_get(), ddata->time_prev);
+
+ if (time_elapsed < LTC2497_CONVERSION_TIME_MS) {
+ /* delay if conversion time not passed
+ * since last read or write
+ */
+ if (msleep_interruptible(
+ LTC2497_CONVERSION_TIME_MS - time_elapsed))
+ return -ERESTARTSYS;
+
+ return 0;
+ }
+
+ if (time_elapsed - LTC2497_CONVERSION_TIME_MS <= 0) {
+ /* We're in automatic mode -
+ * so the last reading is still not outdated
+ */
+ return 0;
+ }
+
+ return 1;
+}
+
+static int ltc2497core_read(struct ltc2497core_driverdata *ddata, u8 address, int *val)
+{
+ int ret;
+
+ ret = ltc2497core_wait_conv(ddata);
+ if (ret < 0)
+ return ret;
+
+ if (ret || ddata->addr_prev != address) {
+ ret = ddata->result_and_measure(ddata, address, NULL);
+ if (ret < 0)
+ return ret;
+ ddata->addr_prev = address;
+
+ if (msleep_interruptible(LTC2497_CONVERSION_TIME_MS))
+ return -ERESTARTSYS;
+ }
+
+ ret = ddata->result_and_measure(ddata, address, val);
+ if (ret < 0)
+ return ret;
+
+ ddata->time_prev = ktime_get();
+
+ return ret;
+}
+
+static int ltc2497core_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct ltc2497core_driverdata *ddata = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ ret = ltc2497core_read(ddata, chan->address, val);
+ mutex_unlock(&indio_dev->mlock);
+ if (ret < 0)
+ return ret;
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ ret = regulator_get_voltage(ddata->ref);
+ if (ret < 0)
+ return ret;
+
+ *val = ret / 1000;
+ *val2 = 17;
+
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+#define LTC2497_CHAN(_chan, _addr, _ds_name) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_chan), \
+ .address = (_addr | (_chan / 2) | ((_chan & 1) ? LTC2497_SIGN : 0)), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .datasheet_name = (_ds_name), \
+}
+
+#define LTC2497_CHAN_DIFF(_chan, _addr) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 1 : 0), \
+ .channel2 = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 0 : 1),\
+ .address = (_addr | _chan), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .differential = 1, \
+}
+
+static const struct iio_chan_spec ltc2497core_channel[] = {
+ LTC2497_CHAN(0, LTC2497_SGL, "CH0"),
+ LTC2497_CHAN(1, LTC2497_SGL, "CH1"),
+ LTC2497_CHAN(2, LTC2497_SGL, "CH2"),
+ LTC2497_CHAN(3, LTC2497_SGL, "CH3"),
+ LTC2497_CHAN(4, LTC2497_SGL, "CH4"),
+ LTC2497_CHAN(5, LTC2497_SGL, "CH5"),
+ LTC2497_CHAN(6, LTC2497_SGL, "CH6"),
+ LTC2497_CHAN(7, LTC2497_SGL, "CH7"),
+ LTC2497_CHAN(8, LTC2497_SGL, "CH8"),
+ LTC2497_CHAN(9, LTC2497_SGL, "CH9"),
+ LTC2497_CHAN(10, LTC2497_SGL, "CH10"),
+ LTC2497_CHAN(11, LTC2497_SGL, "CH11"),
+ LTC2497_CHAN(12, LTC2497_SGL, "CH12"),
+ LTC2497_CHAN(13, LTC2497_SGL, "CH13"),
+ LTC2497_CHAN(14, LTC2497_SGL, "CH14"),
+ LTC2497_CHAN(15, LTC2497_SGL, "CH15"),
+ LTC2497_CHAN_DIFF(0, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(1, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(2, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(3, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(4, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(5, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(6, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(7, LTC2497_DIFF),
+ LTC2497_CHAN_DIFF(0, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(1, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(2, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(3, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(4, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(5, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(6, LTC2497_DIFF | LTC2497_SIGN),
+ LTC2497_CHAN_DIFF(7, LTC2497_DIFF | LTC2497_SIGN),
+};
+
+static const struct iio_info ltc2497core_info = {
+ .read_raw = ltc2497core_read_raw,
+};
+
+int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev)
+{
+ struct ltc2497core_driverdata *ddata = iio_priv(indio_dev);
+ int ret;
+
+ indio_dev->dev.parent = dev;
+ indio_dev->name = dev_name(dev);
+ indio_dev->info = &ltc2497core_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ltc2497core_channel;
+ indio_dev->num_channels = ARRAY_SIZE(ltc2497core_channel);
+
+ ret = ddata->result_and_measure(ddata, LTC2497_CONFIG_DEFAULT, NULL);
+ if (ret < 0)
+ return ret;
+
+ ddata->ref = devm_regulator_get(dev, "vref");
+ if (IS_ERR(ddata->ref)) {
+ if (PTR_ERR(ddata->ref) != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get vref regulator: %pe\n",
+ ddata->ref);
+
+ return PTR_ERR(ddata->ref);
+ }
+
+ ret = regulator_enable(ddata->ref);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enable vref regulator: %pe\n",
+ ERR_PTR(ret));
+ return ret;
+ }
+
+ if (dev->platform_data) {
+ struct iio_map *plat_data;
+
+ plat_data = (struct iio_map *)dev->platform_data;
+
+ ret = iio_map_array_register(indio_dev, plat_data);
+ if (ret) {
+ dev_err(&indio_dev->dev, "iio map err: %d\n", ret);
+ goto err_regulator_disable;
+ }
+ }
+
+ ddata->addr_prev = LTC2497_CONFIG_DEFAULT;
+ ddata->time_prev = ktime_get();
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0)
+ goto err_array_unregister;
+
+ return 0;
+
+err_array_unregister:
+ iio_map_array_unregister(indio_dev);
+
+err_regulator_disable:
+ regulator_disable(ddata->ref);
+
+ return ret;
+}
+EXPORT_SYMBOL_NS(ltc2497core_probe, LTC2497);
+
+void ltc2497core_remove(struct iio_dev *indio_dev)
+{
+ struct ltc2497core_driverdata *ddata = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ iio_map_array_unregister(indio_dev);
+
+ regulator_disable(ddata->ref);
+}
+EXPORT_SYMBOL_NS(ltc2497core_remove, LTC2497);
+
+MODULE_DESCRIPTION("common code for LTC2496/LTC2497 drivers");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c
index 470406032720..5db63d7c6bc5 100644
--- a/drivers/iio/adc/ltc2497.c
+++ b/drivers/iio/adc/ltc2497.c
@@ -7,27 +7,18 @@
* Datasheet: http://cds.linear.com/docs/en/datasheet/2497fd.pdf
*/
-#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/driver.h>
-#include <linux/iio/sysfs.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/regulator/consumer.h>
-#define LTC2497_ENABLE 0xA0
-#define LTC2497_SGL BIT(4)
-#define LTC2497_DIFF 0
-#define LTC2497_SIGN BIT(3)
-#define LTC2497_CONFIG_DEFAULT LTC2497_ENABLE
-#define LTC2497_CONVERSION_TIME_MS 150ULL
+#include "ltc2497.h"
-struct ltc2497_st {
+struct ltc2497_driverdata {
+ /* this must be the first member */
+ struct ltc2497core_driverdata common_ddata;
struct i2c_client *client;
- struct regulator *ref;
- ktime_t time_prev;
- u8 addr_prev;
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
@@ -35,232 +26,59 @@ struct ltc2497_st {
__be32 buf ____cacheline_aligned;
};
-static int ltc2497_wait_conv(struct ltc2497_st *st)
+static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata,
+ u8 address, int *val)
{
- s64 time_elapsed;
-
- time_elapsed = ktime_ms_delta(ktime_get(), st->time_prev);
-
- if (time_elapsed < LTC2497_CONVERSION_TIME_MS) {
- /* delay if conversion time not passed
- * since last read or write
- */
- if (msleep_interruptible(
- LTC2497_CONVERSION_TIME_MS - time_elapsed))
- return -ERESTARTSYS;
-
- return 0;
- }
-
- if (time_elapsed - LTC2497_CONVERSION_TIME_MS <= 0) {
- /* We're in automatic mode -
- * so the last reading is stil not outdated
- */
- return 0;
- }
-
- return 1;
-}
-
-static int ltc2497_read(struct ltc2497_st *st, u8 address, int *val)
-{
- struct i2c_client *client = st->client;
- int ret;
-
- ret = ltc2497_wait_conv(st);
- if (ret < 0)
- return ret;
-
- if (ret || st->addr_prev != address) {
- ret = i2c_smbus_write_byte(st->client,
- LTC2497_ENABLE | address);
- if (ret < 0)
- return ret;
- st->addr_prev = address;
- if (msleep_interruptible(LTC2497_CONVERSION_TIME_MS))
- return -ERESTARTSYS;
- }
- ret = i2c_master_recv(client, (char *)&st->buf, 3);
- if (ret < 0) {
- dev_err(&client->dev, "i2c_master_recv failed\n");
- return ret;
- }
- st->time_prev = ktime_get();
-
- /* convert and shift the result,
- * and finally convert from offset binary to signed integer
- */
- *val = (be32_to_cpu(st->buf) >> 14) - (1 << 17);
-
- return ret;
-}
-
-static int ltc2497_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
-{
- struct ltc2497_st *st = iio_priv(indio_dev);
+ struct ltc2497_driverdata *st =
+ container_of(ddata, struct ltc2497_driverdata, common_ddata);
int ret;
- switch (mask) {
- case IIO_CHAN_INFO_RAW:
- mutex_lock(&indio_dev->mlock);
- ret = ltc2497_read(st, chan->address, val);
- mutex_unlock(&indio_dev->mlock);
- if (ret < 0)
- return ret;
-
- return IIO_VAL_INT;
-
- case IIO_CHAN_INFO_SCALE:
- ret = regulator_get_voltage(st->ref);
- if (ret < 0)
+ if (val) {
+ ret = i2c_master_recv(st->client, (char *)&st->buf, 3);
+ if (ret < 0) {
+ dev_err(&st->client->dev, "i2c_master_recv failed\n");
return ret;
+ }
- *val = ret / 1000;
- *val2 = 17;
-
- return IIO_VAL_FRACTIONAL_LOG2;
-
- default:
- return -EINVAL;
+ *val = (be32_to_cpu(st->buf) >> 14) - (1 << 17);
}
-}
-#define LTC2497_CHAN(_chan, _addr, _ds_name) { \
- .type = IIO_VOLTAGE, \
- .indexed = 1, \
- .channel = (_chan), \
- .address = (_addr | (_chan / 2) | ((_chan & 1) ? LTC2497_SIGN : 0)), \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
- .datasheet_name = (_ds_name), \
-}
-
-#define LTC2497_CHAN_DIFF(_chan, _addr) { \
- .type = IIO_VOLTAGE, \
- .indexed = 1, \
- .channel = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 1 : 0), \
- .channel2 = (_chan) * 2 + ((_addr) & LTC2497_SIGN ? 0 : 1),\
- .address = (_addr | _chan), \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
- .differential = 1, \
+ ret = i2c_smbus_write_byte(st->client,
+ LTC2497_ENABLE | address);
+ if (ret)
+ dev_err(&st->client->dev, "i2c transfer failed: %pe\n",
+ ERR_PTR(ret));
+ return ret;
}
-static const struct iio_chan_spec ltc2497_channel[] = {
- LTC2497_CHAN(0, LTC2497_SGL, "CH0"),
- LTC2497_CHAN(1, LTC2497_SGL, "CH1"),
- LTC2497_CHAN(2, LTC2497_SGL, "CH2"),
- LTC2497_CHAN(3, LTC2497_SGL, "CH3"),
- LTC2497_CHAN(4, LTC2497_SGL, "CH4"),
- LTC2497_CHAN(5, LTC2497_SGL, "CH5"),
- LTC2497_CHAN(6, LTC2497_SGL, "CH6"),
- LTC2497_CHAN(7, LTC2497_SGL, "CH7"),
- LTC2497_CHAN(8, LTC2497_SGL, "CH8"),
- LTC2497_CHAN(9, LTC2497_SGL, "CH9"),
- LTC2497_CHAN(10, LTC2497_SGL, "CH10"),
- LTC2497_CHAN(11, LTC2497_SGL, "CH11"),
- LTC2497_CHAN(12, LTC2497_SGL, "CH12"),
- LTC2497_CHAN(13, LTC2497_SGL, "CH13"),
- LTC2497_CHAN(14, LTC2497_SGL, "CH14"),
- LTC2497_CHAN(15, LTC2497_SGL, "CH15"),
- LTC2497_CHAN_DIFF(0, LTC2497_DIFF),
- LTC2497_CHAN_DIFF(1, LTC2497_DIFF),
- LTC2497_CHAN_DIFF(2, LTC2497_DIFF),
- LTC2497_CHAN_DIFF(3, LTC2497_DIFF),
- LTC2497_CHAN_DIFF(4, LTC2497_DIFF),
- LTC2497_CHAN_DIFF(5, LTC2497_DIFF),
- LTC2497_CHAN_DIFF(6, LTC2497_DIFF),
- LTC2497_CHAN_DIFF(7, LTC2497_DIFF),
- LTC2497_CHAN_DIFF(0, LTC2497_DIFF | LTC2497_SIGN),
- LTC2497_CHAN_DIFF(1, LTC2497_DIFF | LTC2497_SIGN),
- LTC2497_CHAN_DIFF(2, LTC2497_DIFF | LTC2497_SIGN),
- LTC2497_CHAN_DIFF(3, LTC2497_DIFF | LTC2497_SIGN),
- LTC2497_CHAN_DIFF(4, LTC2497_DIFF | LTC2497_SIGN),
- LTC2497_CHAN_DIFF(5, LTC2497_DIFF | LTC2497_SIGN),
- LTC2497_CHAN_DIFF(6, LTC2497_DIFF | LTC2497_SIGN),
- LTC2497_CHAN_DIFF(7, LTC2497_DIFF | LTC2497_SIGN),
-};
-
-static const struct iio_info ltc2497_info = {
- .read_raw = ltc2497_read_raw,
-};
-
static int ltc2497_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct iio_dev *indio_dev;
- struct ltc2497_st *st;
- struct iio_map *plat_data;
- int ret;
+ struct ltc2497_driverdata *st;
+ struct device *dev = &client->dev;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
I2C_FUNC_SMBUS_WRITE_BYTE))
return -EOPNOTSUPP;
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
st->client = client;
+ st->common_ddata.result_and_measure = ltc2497_result_and_measure;
- indio_dev->dev.parent = &client->dev;
- indio_dev->name = id->name;
- indio_dev->info = &ltc2497_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = ltc2497_channel;
- indio_dev->num_channels = ARRAY_SIZE(ltc2497_channel);
-
- st->ref = devm_regulator_get(&client->dev, "vref");
- if (IS_ERR(st->ref))
- return PTR_ERR(st->ref);
-
- ret = regulator_enable(st->ref);
- if (ret < 0)
- return ret;
-
- if (client->dev.platform_data) {
- plat_data = ((struct iio_map *)client->dev.platform_data);
- ret = iio_map_array_register(indio_dev, plat_data);
- if (ret) {
- dev_err(&indio_dev->dev, "iio map err: %d\n", ret);
- goto err_regulator_disable;
- }
- }
-
- ret = i2c_smbus_write_byte(st->client, LTC2497_CONFIG_DEFAULT);
- if (ret < 0)
- goto err_array_unregister;
-
- st->addr_prev = LTC2497_CONFIG_DEFAULT;
- st->time_prev = ktime_get();
-
- ret = iio_device_register(indio_dev);
- if (ret < 0)
- goto err_array_unregister;
-
- return 0;
-
-err_array_unregister:
- iio_map_array_unregister(indio_dev);
-
-err_regulator_disable:
- regulator_disable(st->ref);
-
- return ret;
+ return ltc2497core_probe(dev, indio_dev);
}
static int ltc2497_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
- struct ltc2497_st *st = iio_priv(indio_dev);
- iio_map_array_unregister(indio_dev);
- iio_device_unregister(indio_dev);
- regulator_disable(st->ref);
+ ltc2497core_remove(indio_dev);
return 0;
}
diff --git a/drivers/iio/adc/ltc2497.h b/drivers/iio/adc/ltc2497.h
new file mode 100644
index 000000000000..d0b42dd6b8ad
--- /dev/null
+++ b/drivers/iio/adc/ltc2497.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#define LTC2497_ENABLE 0xA0
+#define LTC2497_CONFIG_DEFAULT LTC2497_ENABLE
+#define LTC2497_CONVERSION_TIME_MS 150ULL
+
+struct ltc2497core_driverdata {
+ struct regulator *ref;
+ ktime_t time_prev;
+ u8 addr_prev;
+ int (*result_and_measure)(struct ltc2497core_driverdata *ddata,
+ u8 address, int *val);
+};
+
+int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev);
+void ltc2497core_remove(struct iio_dev *indio_dev);
+
+MODULE_IMPORT_NS(LTC2497);
diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c
index e480529b3f04..04d5ff7d2c8e 100644
--- a/drivers/iio/adc/max9611.c
+++ b/drivers/iio/adc/max9611.c
@@ -115,22 +115,17 @@ enum max9611_conf_ids {
* where data shall be read from
*/
static const unsigned int max9611_mux_conf[][2] = {
- /* CONF_SENSE_1x */
- { MAX9611_MUX_SENSE_1x, MAX9611_REG_CSA_DATA },
- /* CONF_SENSE_4x */
- { MAX9611_MUX_SENSE_4x, MAX9611_REG_CSA_DATA },
- /* CONF_SENSE_8x */
- { MAX9611_MUX_SENSE_8x, MAX9611_REG_CSA_DATA },
- /* CONF_IN_VOLT */
- { MAX9611_INPUT_VOLT, MAX9611_REG_RS_DATA },
- /* CONF_TEMP */
- { MAX9611_MUX_TEMP, MAX9611_REG_TEMP_DATA },
+ [CONF_SENSE_1x] = { MAX9611_MUX_SENSE_1x, MAX9611_REG_CSA_DATA },
+ [CONF_SENSE_4x] = { MAX9611_MUX_SENSE_4x, MAX9611_REG_CSA_DATA },
+ [CONF_SENSE_8x] = { MAX9611_MUX_SENSE_8x, MAX9611_REG_CSA_DATA },
+ [CONF_IN_VOLT] = { MAX9611_INPUT_VOLT, MAX9611_REG_RS_DATA },
+ [CONF_TEMP] = { MAX9611_MUX_TEMP, MAX9611_REG_TEMP_DATA },
};
enum max9611_csa_gain {
- CSA_GAIN_1x,
- CSA_GAIN_4x,
- CSA_GAIN_8x,
+ CSA_GAIN_1x = CONF_SENSE_1x,
+ CSA_GAIN_4x = CONF_SENSE_4x,
+ CSA_GAIN_8x = CONF_SENSE_8x,
};
enum max9611_csa_gain_params {
@@ -148,18 +143,9 @@ enum max9611_csa_gain_params {
* value; use this structure to retrieve the correct LSB and offset values.
*/
static const unsigned int max9611_gain_conf[][2] = {
- { /* [0] CSA_GAIN_1x */
- MAX9611_CSA_1X_LSB_nV,
- MAX9611_CSA_1X_OFFS_RAW,
- },
- { /* [1] CSA_GAIN_4x */
- MAX9611_CSA_4X_LSB_nV,
- MAX9611_CSA_4X_OFFS_RAW,
- },
- { /* [2] CSA_GAIN_8x */
- MAX9611_CSA_8X_LSB_nV,
- MAX9611_CSA_8X_OFFS_RAW,
- },
+ [CSA_GAIN_1x] = { MAX9611_CSA_1X_LSB_nV, MAX9611_CSA_1X_OFFS_RAW, },
+ [CSA_GAIN_4x] = { MAX9611_CSA_4X_LSB_nV, MAX9611_CSA_4X_OFFS_RAW, },
+ [CSA_GAIN_8x] = { MAX9611_CSA_8X_LSB_nV, MAX9611_CSA_8X_OFFS_RAW, },
};
enum max9611_chan_addrs {
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 6537f4f776c5..97655d7fc11a 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -280,21 +280,21 @@ out:
static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
.csr = STM32F4_ADC_CSR,
.ccr = STM32F4_ADC_CCR,
- .eoc1_msk = STM32F4_EOC1,
- .eoc2_msk = STM32F4_EOC2,
- .eoc3_msk = STM32F4_EOC3,
+ .eoc1_msk = STM32F4_EOC1 | STM32F4_OVR1,
+ .eoc2_msk = STM32F4_EOC2 | STM32F4_OVR2,
+ .eoc3_msk = STM32F4_EOC3 | STM32F4_OVR3,
.ier = STM32F4_ADC_CR1,
- .eocie_msk = STM32F4_EOCIE,
+ .eocie_msk = STM32F4_EOCIE | STM32F4_OVRIE,
};
/* STM32H7 common registers definitions */
static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
.csr = STM32H7_ADC_CSR,
.ccr = STM32H7_ADC_CCR,
- .eoc1_msk = STM32H7_EOC_MST,
- .eoc2_msk = STM32H7_EOC_SLV,
+ .eoc1_msk = STM32H7_EOC_MST | STM32H7_OVR_MST,
+ .eoc2_msk = STM32H7_EOC_SLV | STM32H7_OVR_SLV,
.ier = STM32H7_ADC_IER,
- .eocie_msk = STM32H7_EOCIE,
+ .eocie_msk = STM32H7_EOCIE | STM32H7_OVRIE,
};
static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
diff --git a/drivers/iio/adc/stm32-adc-core.h b/drivers/iio/adc/stm32-adc-core.h
index 2579d514c2a3..2322809bfd2f 100644
--- a/drivers/iio/adc/stm32-adc-core.h
+++ b/drivers/iio/adc/stm32-adc-core.h
@@ -51,10 +51,12 @@
#define STM32F4_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x04)
/* STM32F4_ADC_SR - bit fields */
+#define STM32F4_OVR BIT(5)
#define STM32F4_STRT BIT(4)
#define STM32F4_EOC BIT(1)
/* STM32F4_ADC_CR1 - bit fields */
+#define STM32F4_OVRIE BIT(26)
#define STM32F4_RES_SHIFT 24
#define STM32F4_RES_MASK GENMASK(25, 24)
#define STM32F4_SCAN BIT(8)
@@ -72,8 +74,11 @@
#define STM32F4_ADON BIT(0)
/* STM32F4_ADC_CSR - bit fields */
+#define STM32F4_OVR3 BIT(21)
#define STM32F4_EOC3 BIT(17)
+#define STM32F4_OVR2 BIT(13)
#define STM32F4_EOC2 BIT(9)
+#define STM32F4_OVR1 BIT(5)
#define STM32F4_EOC1 BIT(1)
/* STM32F4_ADC_CCR - bit fields */
@@ -103,10 +108,12 @@
/* STM32H7_ADC_ISR - bit fields */
#define STM32MP1_VREGREADY BIT(12)
+#define STM32H7_OVR BIT(4)
#define STM32H7_EOC BIT(2)
#define STM32H7_ADRDY BIT(0)
/* STM32H7_ADC_IER - bit fields */
+#define STM32H7_OVRIE STM32H7_OVR
#define STM32H7_EOCIE STM32H7_EOC
/* STM32H7_ADC_CR - bit fields */
@@ -155,7 +162,9 @@ enum stm32h7_adc_dmngt {
#define STM32H7_LINCALFACT_MASK GENMASK(29, 0)
/* STM32H7_ADC_CSR - bit fields */
+#define STM32H7_OVR_SLV BIT(20)
#define STM32H7_EOC_SLV BIT(18)
+#define STM32H7_OVR_MST BIT(4)
#define STM32H7_EOC_MST BIT(2)
/* STM32H7_ADC_CCR - bit fields */
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 3b291d72701c..5f05bf9f16ea 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -117,7 +117,9 @@ struct stm32_adc_regs {
* struct stm32_adc_regspec - stm32 registers definition
* @dr: data register offset
* @ier_eoc: interrupt enable register & eocie bitfield
+ * @ier_ovr: interrupt enable register & overrun bitfield
* @isr_eoc: interrupt status register & eoc bitfield
+ * @isr_ovr: interrupt status register & overrun bitfield
* @sqr: reference to sequence registers array
* @exten: trigger control register & bitfield
* @extsel: trigger selection register & bitfield
@@ -128,7 +130,9 @@ struct stm32_adc_regs {
struct stm32_adc_regspec {
const u32 dr;
const struct stm32_adc_regs ier_eoc;
+ const struct stm32_adc_regs ier_ovr;
const struct stm32_adc_regs isr_eoc;
+ const struct stm32_adc_regs isr_ovr;
const struct stm32_adc_regs *sqr;
const struct stm32_adc_regs exten;
const struct stm32_adc_regs extsel;
@@ -337,7 +341,9 @@ static const unsigned int stm32f4_adc_smp_cycles[STM32_ADC_MAX_SMP + 1] = {
static const struct stm32_adc_regspec stm32f4_adc_regspec = {
.dr = STM32F4_ADC_DR,
.ier_eoc = { STM32F4_ADC_CR1, STM32F4_EOCIE },
+ .ier_ovr = { STM32F4_ADC_CR1, STM32F4_OVRIE },
.isr_eoc = { STM32F4_ADC_SR, STM32F4_EOC },
+ .isr_ovr = { STM32F4_ADC_SR, STM32F4_OVR },
.sqr = stm32f4_sq,
.exten = { STM32F4_ADC_CR2, STM32F4_EXTEN_MASK, STM32F4_EXTEN_SHIFT },
.extsel = { STM32F4_ADC_CR2, STM32F4_EXTSEL_MASK,
@@ -429,7 +435,9 @@ static const unsigned int stm32h7_adc_smp_cycles[STM32_ADC_MAX_SMP + 1] = {
static const struct stm32_adc_regspec stm32h7_adc_regspec = {
.dr = STM32H7_ADC_DR,
.ier_eoc = { STM32H7_ADC_IER, STM32H7_EOCIE },
+ .ier_ovr = { STM32H7_ADC_IER, STM32H7_OVRIE },
.isr_eoc = { STM32H7_ADC_ISR, STM32H7_EOC },
+ .isr_ovr = { STM32H7_ADC_ISR, STM32H7_OVR },
.sqr = stm32h7_sq,
.exten = { STM32H7_ADC_CFGR, STM32H7_EXTEN_MASK, STM32H7_EXTEN_SHIFT },
.extsel = { STM32H7_ADC_CFGR, STM32H7_EXTSEL_MASK,
@@ -506,6 +514,18 @@ static void stm32_adc_conv_irq_disable(struct stm32_adc *adc)
adc->cfg->regs->ier_eoc.mask);
}
+static void stm32_adc_ovr_irq_enable(struct stm32_adc *adc)
+{
+ stm32_adc_set_bits(adc, adc->cfg->regs->ier_ovr.reg,
+ adc->cfg->regs->ier_ovr.mask);
+}
+
+static void stm32_adc_ovr_irq_disable(struct stm32_adc *adc)
+{
+ stm32_adc_clr_bits(adc, adc->cfg->regs->ier_ovr.reg,
+ adc->cfg->regs->ier_ovr.mask);
+}
+
static void stm32_adc_set_res(struct stm32_adc *adc)
{
const struct stm32_adc_regs *res = &adc->cfg->regs->res;
@@ -1205,6 +1225,19 @@ static int stm32_adc_read_raw(struct iio_dev *indio_dev,
}
}
+static irqreturn_t stm32_adc_threaded_isr(int irq, void *data)
+{
+ struct stm32_adc *adc = data;
+ struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+ const struct stm32_adc_regspec *regs = adc->cfg->regs;
+ u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
+
+ if (status & regs->isr_ovr.mask)
+ dev_err(&indio_dev->dev, "Overrun, stopping: restart needed\n");
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t stm32_adc_isr(int irq, void *data)
{
struct stm32_adc *adc = data;
@@ -1212,6 +1245,19 @@ static irqreturn_t stm32_adc_isr(int irq, void *data)
const struct stm32_adc_regspec *regs = adc->cfg->regs;
u32 status = stm32_adc_readl(adc, regs->isr_eoc.reg);
+ if (status & regs->isr_ovr.mask) {
+ /*
+ * Overrun occurred on regular conversions: data for wrong
+ * channel may be read. Unconditionally disable interrupts
+ * to stop processing data and print error message.
+ * Restarting the capture can be done by disabling, then
+ * re-enabling it (e.g. write 0, then 1 to buffer/enable).
+ */
+ stm32_adc_ovr_irq_disable(adc);
+ stm32_adc_conv_irq_disable(adc);
+ return IRQ_WAKE_THREAD;
+ }
+
if (status & regs->isr_eoc.mask) {
/* Reading DR also clears EOC status flag */
adc->buffer[adc->bufi] = stm32_adc_readw(adc, regs->dr);
@@ -1441,6 +1487,8 @@ static int __stm32_adc_buffer_postenable(struct iio_dev *indio_dev)
/* Reset adc buffer index */
adc->bufi = 0;
+ stm32_adc_ovr_irq_enable(adc);
+
if (!adc->dma_chan)
stm32_adc_conv_irq_enable(adc);
@@ -1481,6 +1529,8 @@ static void __stm32_adc_buffer_predisable(struct iio_dev *indio_dev)
if (!adc->dma_chan)
stm32_adc_conv_irq_disable(adc);
+ stm32_adc_ovr_irq_disable(adc);
+
if (adc->dma_chan)
dmaengine_terminate_sync(adc->dma_chan);
@@ -1818,8 +1868,9 @@ static int stm32_adc_probe(struct platform_device *pdev)
if (adc->irq < 0)
return adc->irq;
- ret = devm_request_irq(&pdev->dev, adc->irq, stm32_adc_isr,
- 0, pdev->name, adc);
+ ret = devm_request_threaded_irq(&pdev->dev, adc->irq, stm32_adc_isr,
+ stm32_adc_threaded_isr,
+ 0, pdev->name, adc);
if (ret) {
dev_err(&pdev->dev, "failed to request IRQ\n");
return ret;
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index a550b132cfb7..5ea4f45d6bad 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -12,17 +12,15 @@
*/
#include <linux/module.h>
-#include <linux/of_device.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/i2c.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
#include <linux/delay.h>
-#include <linux/platform_data/ads1015.h>
-
#include <linux/iio/iio.h>
#include <linux/iio/types.h>
#include <linux/iio/sysfs.h>
@@ -33,6 +31,8 @@
#define ADS1015_DRV_NAME "ads1015"
+#define ADS1015_CHANNELS 8
+
#define ADS1015_CONV_REG 0x00
#define ADS1015_CFG_REG 0x01
#define ADS1015_LO_THRESH_REG 0x02
@@ -77,6 +77,7 @@
#define ADS1015_DEFAULT_CHAN 0
enum chip_ids {
+ ADSXXXX = 0,
ADS1015,
ADS1115,
};
@@ -219,6 +220,12 @@ static const struct iio_event_spec ads1015_events[] = {
.datasheet_name = "AIN"#_chan"-AIN"#_chan2, \
}
+struct ads1015_channel_data {
+ bool enabled;
+ unsigned int pga;
+ unsigned int data_rate;
+};
+
struct ads1015_thresh_data {
unsigned int comp_queue;
int high_thresh;
@@ -837,65 +844,58 @@ static const struct iio_info ads1115_info = {
.attrs = &ads1115_attribute_group,
};
-#ifdef CONFIG_OF
-static int ads1015_get_channels_config_of(struct i2c_client *client)
+static int ads1015_client_get_channels_config(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ads1015_data *data = iio_priv(indio_dev);
- struct device_node *node;
+ struct device *dev = &client->dev;
+ struct fwnode_handle *node;
+ int i = -1;
- if (!client->dev.of_node ||
- !of_get_next_child(client->dev.of_node, NULL))
- return -EINVAL;
-
- for_each_child_of_node(client->dev.of_node, node) {
+ device_for_each_child_node(dev, node) {
u32 pval;
unsigned int channel;
unsigned int pga = ADS1015_DEFAULT_PGA;
unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
- if (of_property_read_u32(node, "reg", &pval)) {
- dev_err(&client->dev, "invalid reg on %pOF\n",
- node);
+ if (fwnode_property_read_u32(node, "reg", &pval)) {
+ dev_err(dev, "invalid reg on %pfw\n", node);
continue;
}
channel = pval;
if (channel >= ADS1015_CHANNELS) {
- dev_err(&client->dev,
- "invalid channel index %d on %pOF\n",
+ dev_err(dev, "invalid channel index %d on %pfw\n",
channel, node);
continue;
}
- if (!of_property_read_u32(node, "ti,gain", &pval)) {
+ if (!fwnode_property_read_u32(node, "ti,gain", &pval)) {
pga = pval;
if (pga > 6) {
- dev_err(&client->dev, "invalid gain on %pOF\n",
- node);
- of_node_put(node);
+ dev_err(dev, "invalid gain on %pfw\n", node);
+ fwnode_handle_put(node);
return -EINVAL;
}
}
- if (!of_property_read_u32(node, "ti,datarate", &pval)) {
+ if (!fwnode_property_read_u32(node, "ti,datarate", &pval)) {
data_rate = pval;
if (data_rate > 7) {
- dev_err(&client->dev,
- "invalid data_rate on %pOF\n",
- node);
- of_node_put(node);
+ dev_err(dev, "invalid data_rate on %pfw\n", node);
+ fwnode_handle_put(node);
return -EINVAL;
}
}
data->channel_data[channel].pga = pga;
data->channel_data[channel].data_rate = data_rate;
+
+ i++;
}
- return 0;
+ return i < 0 ? -EINVAL : 0;
}
-#endif
static void ads1015_get_channels_config(struct i2c_client *client)
{
@@ -903,19 +903,10 @@ static void ads1015_get_channels_config(struct i2c_client *client)
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ads1015_data *data = iio_priv(indio_dev);
- struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
- /* prefer platform data */
- if (pdata) {
- memcpy(data->channel_data, pdata->channel_data,
- sizeof(data->channel_data));
+ if (!ads1015_client_get_channels_config(client))
return;
- }
-#ifdef CONFIG_OF
- if (!ads1015_get_channels_config_of(client))
- return;
-#endif
/* fallback on default configuration */
for (k = 0; k < ADS1015_CHANNELS; ++k) {
data->channel_data[k].pga = ADS1015_DEFAULT_PGA;
@@ -953,9 +944,8 @@ static int ads1015_probe(struct i2c_client *client,
indio_dev->name = ADS1015_DRV_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
- if (client->dev.of_node)
- chip = (enum chip_ids)of_device_get_match_data(&client->dev);
- else
+ chip = (enum chip_ids)device_get_match_data(&client->dev);
+ if (chip == ADSXXXX)
chip = id->driver_data;
switch (chip) {
case ADS1015:
@@ -970,6 +960,9 @@ static int ads1015_probe(struct i2c_client *client,
indio_dev->info = &ads1115_info;
data->data_rate = (unsigned int *) &ads1115_data_rate;
break;
+ default:
+ dev_err(&client->dev, "Unknown chip %d\n", chip);
+ return -EINVAL;
}
data->event_channel = ADS1015_CHANNELS;
diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
index 2e66e4d586ff..f9edc1207f75 100644
--- a/drivers/iio/adc/ti-ads7950.c
+++ b/drivers/iio/adc/ti-ads7950.c
@@ -602,7 +602,7 @@ static int ti_ads7950_probe(struct spi_device *spi)
st->reg = devm_regulator_get(&spi->dev, "vref");
if (IS_ERR(st->reg)) {
- dev_err(&spi->dev, "Failed get get regulator \"vref\"\n");
+ dev_err(&spi->dev, "Failed to get regulator \"vref\"\n");
ret = PTR_ERR(st->reg);
goto error_destroy_mutex;
}
diff --git a/drivers/iio/buffer/industrialio-buffer-dma.c b/drivers/iio/buffer/industrialio-buffer-dma.c
index 90cf6e586b10..a74bd9c0587c 100644
--- a/drivers/iio/buffer/industrialio-buffer-dma.c
+++ b/drivers/iio/buffer/industrialio-buffer-dma.c
@@ -476,7 +476,7 @@ static struct iio_dma_buffer_block *iio_dma_buffer_dequeue(
* @n: Number of bytes to read
* @user_buffer: Userspace buffer to copy the data to
*
- * Should be used as the read_first_n callback for iio_buffer_access_ops
+ * Should be used as the read callback for iio_buffer_access_ops
* struct for DMA buffers.
*/
int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n,
diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
index bea4a75e92f1..b129693af0fd 100644
--- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c
+++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
@@ -10,8 +10,10 @@
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/buffer_impl.h>
#include <linux/iio/buffer-dma.h>
@@ -107,7 +109,7 @@ static void iio_dmaengine_buffer_release(struct iio_buffer *buf)
}
static const struct iio_buffer_access_funcs iio_dmaengine_buffer_ops = {
- .read_first_n = iio_dma_buffer_read,
+ .read = iio_dma_buffer_read,
.set_bytes_per_datum = iio_dma_buffer_set_bytes_per_datum,
.set_length = iio_dma_buffer_set_length,
.request_update = iio_dma_buffer_request_update,
@@ -125,6 +127,24 @@ static const struct iio_dma_buffer_ops iio_dmaengine_default_ops = {
.abort = iio_dmaengine_buffer_abort,
};
+static ssize_t iio_dmaengine_buffer_get_length_align(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct dmaengine_buffer *dmaengine_buffer =
+ iio_buffer_to_dmaengine_buffer(indio_dev->buffer);
+
+ return sprintf(buf, "%u\n", dmaengine_buffer->align);
+}
+
+static IIO_DEVICE_ATTR(length_align_bytes, 0444,
+ iio_dmaengine_buffer_get_length_align, NULL, 0);
+
+static const struct attribute *iio_dmaengine_buffer_attrs[] = {
+ &iio_dev_attr_length_align_bytes.dev_attr.attr,
+ NULL,
+};
+
/**
* iio_dmaengine_buffer_alloc() - Allocate new buffer which uses DMAengine
* @dev: Parent device for the buffer
@@ -150,7 +170,7 @@ struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev,
if (!dmaengine_buffer)
return ERR_PTR(-ENOMEM);
- chan = dma_request_slave_channel_reason(dev, channel);
+ chan = dma_request_chan(dev, channel);
if (IS_ERR(chan)) {
ret = PTR_ERR(chan);
goto err_free;
@@ -178,6 +198,8 @@ struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev,
iio_dma_buffer_init(&dmaengine_buffer->queue, chan->device->dev,
&iio_dmaengine_default_ops);
+ iio_buffer_set_attrs(&dmaengine_buffer->queue.buffer,
+ iio_dmaengine_buffer_attrs);
dmaengine_buffer->queue.buffer.access = &iio_dmaengine_buffer_ops;
@@ -206,3 +228,7 @@ void iio_dmaengine_buffer_free(struct iio_buffer *buffer)
iio_buffer_put(buffer);
}
EXPORT_SYMBOL_GPL(iio_dmaengine_buffer_free);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("DMA buffer for the IIO framework");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/buffer/kfifo_buf.c b/drivers/iio/buffer/kfifo_buf.c
index e78fc0834e6b..3150f8ab984b 100644
--- a/drivers/iio/buffer/kfifo_buf.c
+++ b/drivers/iio/buffer/kfifo_buf.c
@@ -98,8 +98,7 @@ static int iio_store_to_kfifo(struct iio_buffer *r,
return 0;
}
-static int iio_read_first_n_kfifo(struct iio_buffer *r,
- size_t n, char __user *buf)
+static int iio_read_kfifo(struct iio_buffer *r, size_t n, char __user *buf)
{
int ret, copied;
struct iio_kfifo *kf = iio_to_kfifo(r);
@@ -141,7 +140,7 @@ static void iio_kfifo_buffer_release(struct iio_buffer *buffer)
static const struct iio_buffer_access_funcs kfifo_access_funcs = {
.store_to = &iio_store_to_kfifo,
- .read_first_n = &iio_read_first_n_kfifo,
+ .read = &iio_read_kfifo,
.data_available = iio_kfifo_buf_data_available,
.request_update = &iio_request_update_kfifo,
.set_bytes_per_datum = &iio_set_bytes_per_datum_kfifo,
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
index f97270bc4034..33d3a595dda9 100644
--- a/drivers/iio/chemical/Makefile
+++ b/drivers/iio/chemical/Makefile
@@ -4,7 +4,7 @@
#
# When adding new entries keep the list in alphabetical order
-obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-ph-sensor.o
+obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-sensor.o
obj-$(CONFIG_BME680) += bme680_core.o
obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
obj-$(CONFIG_BME680_SPI) += bme680_spi.o
diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-sensor.c
index 6c175eb1c7a7..99095c80531b 100644
--- a/drivers/iio/chemical/atlas-ph-sensor.c
+++ b/drivers/iio/chemical/atlas-sensor.c
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * atlas-ph-sensor.c - Support for Atlas Scientific OEM pH-SM sensor
+ * atlas-sensor.c - Support for Atlas Scientific OEM SM sensors
*
- * Copyright (C) 2015-2018 Matt Ranostay
+ * Copyright (C) 2015-2019 Konsulko Group
* Author: Matt Ranostay <matt.ranostay@konsulko.com>
*/
@@ -14,7 +14,6 @@
#include <linux/err.h>
#include <linux/irq.h>
#include <linux/irq_work.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
@@ -25,8 +24,8 @@
#include <linux/iio/triggered_buffer.h>
#include <linux/pm_runtime.h>
-#define ATLAS_REGMAP_NAME "atlas_ph_regmap"
-#define ATLAS_DRV_NAME "atlas_ph"
+#define ATLAS_REGMAP_NAME "atlas_regmap"
+#define ATLAS_DRV_NAME "atlas"
#define ATLAS_REG_DEV_TYPE 0x00
#define ATLAS_REG_DEV_VERSION 0x01
@@ -681,5 +680,5 @@ static struct i2c_driver atlas_driver = {
module_i2c_driver(atlas_driver);
MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
-MODULE_DESCRIPTION("Atlas Scientific pH-SM sensor");
+MODULE_DESCRIPTION("Atlas Scientific SM sensors");
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/common/ssp_sensors/ssp.h b/drivers/iio/common/ssp_sensors/ssp.h
index 0a381bb1ae6f..abb832795619 100644
--- a/drivers/iio/common/ssp_sensors/ssp.h
+++ b/drivers/iio/common/ssp_sensors/ssp.h
@@ -7,7 +7,7 @@
#define __SSP_SENSORHUB_H__
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/iio/common/ssp_sensors.h>
#include <linux/iio/iio.h>
#include <linux/spi/spi.h>
@@ -168,9 +168,9 @@ struct ssp_sensorhub_info {
* @fw_dl_state: firmware download state
* @comm_lock: lock protecting the handshake
* @pending_lock: lock protecting pending list and completion
- * @mcu_reset_gpio: mcu reset line
- * @ap_mcu_gpio: ap to mcu gpio line
- * @mcu_ap_gpio: mcu to ap gpio line
+ * @mcu_reset_gpiod: mcu reset line
+ * @ap_mcu_gpiod: ap to mcu gpio line
+ * @mcu_ap_gpiod: mcu to ap gpio line
* @pending_list: pending list for messages queued to be sent/read
* @sensor_devs: registered IIO devices table
* @enable_refcount: enable reference count for wdt (watchdog timer)
@@ -212,9 +212,9 @@ struct ssp_data {
struct mutex comm_lock;
struct mutex pending_lock;
- int mcu_reset_gpio;
- int ap_mcu_gpio;
- int mcu_ap_gpio;
+ struct gpio_desc *mcu_reset_gpiod;
+ struct gpio_desc *ap_mcu_gpiod;
+ struct gpio_desc *mcu_ap_gpiod;
struct list_head pending_list;
diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
index 9c70553994c6..a94dbcf491ce 100644
--- a/drivers/iio/common/ssp_sensors/ssp_dev.c
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -9,7 +9,6 @@
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_platform.h>
#include "ssp.h"
@@ -61,9 +60,9 @@ static const struct mfd_cell sensorhub_sensor_devs[] = {
static void ssp_toggle_mcu_reset_gpio(struct ssp_data *data)
{
- gpio_set_value(data->mcu_reset_gpio, 0);
+ gpiod_set_value(data->mcu_reset_gpiod, 0);
usleep_range(1000, 1200);
- gpio_set_value(data->mcu_reset_gpio, 1);
+ gpiod_set_value(data->mcu_reset_gpiod, 1);
msleep(50);
}
@@ -441,7 +440,6 @@ MODULE_DEVICE_TABLE(of, ssp_of_match);
static struct ssp_data *ssp_parse_dt(struct device *dev)
{
- int ret;
struct ssp_data *data;
struct device_node *node = dev->of_node;
const struct of_device_id *match;
@@ -450,26 +448,17 @@ static struct ssp_data *ssp_parse_dt(struct device *dev)
if (!data)
return NULL;
- data->mcu_ap_gpio = of_get_named_gpio(node, "mcu-ap-gpios", 0);
- if (data->mcu_ap_gpio < 0)
- return NULL;
-
- data->ap_mcu_gpio = of_get_named_gpio(node, "ap-mcu-gpios", 0);
- if (data->ap_mcu_gpio < 0)
- return NULL;
-
- data->mcu_reset_gpio = of_get_named_gpio(node, "mcu-reset-gpios", 0);
- if (data->mcu_reset_gpio < 0)
+ data->mcu_ap_gpiod = devm_gpiod_get(dev, "mcu-ap", GPIOD_IN);
+ if (IS_ERR(data->mcu_ap_gpiod))
return NULL;
- ret = devm_gpio_request_one(dev, data->ap_mcu_gpio, GPIOF_OUT_INIT_HIGH,
- "ap-mcu-gpios");
- if (ret)
+ data->ap_mcu_gpiod = devm_gpiod_get(dev, "ap-mcu", GPIOD_OUT_HIGH);
+ if (IS_ERR(data->ap_mcu_gpiod))
return NULL;
- ret = devm_gpio_request_one(dev, data->mcu_reset_gpio,
- GPIOF_OUT_INIT_HIGH, "mcu-reset-gpios");
- if (ret)
+ data->mcu_reset_gpiod = devm_gpiod_get(dev, "mcu-reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(data->mcu_reset_gpiod))
return NULL;
match = of_match_node(ssp_of_match, node);
diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c
index 7db3d5886e3e..4864c38b8d1c 100644
--- a/drivers/iio/common/ssp_sensors/ssp_spi.c
+++ b/drivers/iio/common/ssp_sensors/ssp_spi.c
@@ -155,9 +155,9 @@ static int ssp_check_lines(struct ssp_data *data, bool state)
{
int delay_cnt = 0;
- gpio_set_value_cansleep(data->ap_mcu_gpio, state);
+ gpiod_set_value_cansleep(data->ap_mcu_gpiod, state);
- while (gpio_get_value_cansleep(data->mcu_ap_gpio) != state) {
+ while (gpiod_get_value_cansleep(data->mcu_ap_gpiod) != state) {
usleep_range(3000, 3500);
if (data->shut_down || delay_cnt++ > 500) {
@@ -165,7 +165,7 @@ static int ssp_check_lines(struct ssp_data *data, bool state)
__func__, state);
if (!state)
- gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
+ gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
return -ETIMEDOUT;
}
@@ -197,7 +197,7 @@ static int ssp_do_transfer(struct ssp_data *data, struct ssp_msg *msg,
status = spi_write(data->spi, msg->buffer, SSP_HEADER_SIZE);
if (status < 0) {
- gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
+ gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
dev_err(SSP_DEV, "%s spi_write fail\n", __func__);
goto _error_locked;
}
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 4a2efa00f7f2..e817537cdfb5 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -19,6 +19,9 @@
/**
* st_sensors_new_samples_available() - check if more samples came in
+ * @indio_dev: IIO device reference.
+ * @sdata: Sensor data.
+ *
* returns:
* 0 - no new samples available
* 1 - new samples available
diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c
index 2d897e64c6a9..e2110113e884 100644
--- a/drivers/iio/dac/ad5592r-base.c
+++ b/drivers/iio/dac/ad5592r-base.c
@@ -15,7 +15,6 @@
#include <linux/regulator/consumer.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
-#include <linux/gpio.h>
#include <linux/property.h>
#include <dt-bindings/iio/adi,ad5592r.h>
diff --git a/drivers/iio/dac/ad7303.c b/drivers/iio/dac/ad7303.c
index 14bbac6bee98..15af8a1cce3e 100644
--- a/drivers/iio/dac/ad7303.c
+++ b/drivers/iio/dac/ad7303.c
@@ -12,7 +12,6 @@
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/regulator/consumer.h>
-#include <linux/of.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -202,7 +201,6 @@ static int ad7303_probe(struct spi_device *spi)
const struct spi_device_id *id = spi_get_device_id(spi);
struct iio_dev *indio_dev;
struct ad7303_state *st;
- bool ext_ref;
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
@@ -224,24 +222,15 @@ static int ad7303_probe(struct spi_device *spi)
if (ret)
return ret;
- if (spi->dev.of_node) {
- ext_ref = of_property_read_bool(spi->dev.of_node,
- "REF-supply");
- } else {
- struct ad7303_platform_data *pdata = spi->dev.platform_data;
- if (pdata && pdata->use_external_ref)
- ext_ref = true;
- else
- ext_ref = false;
- }
-
- if (ext_ref) {
- st->vref_reg = devm_regulator_get(&spi->dev, "REF");
- if (IS_ERR(st->vref_reg)) {
- ret = PTR_ERR(st->vref_reg);
+ st->vref_reg = devm_regulator_get_optional(&spi->dev, "REF");
+ if (IS_ERR(st->vref_reg)) {
+ ret = PTR_ERR(st->vref_reg);
+ if (ret != -ENODEV)
goto err_disable_vdd_reg;
- }
+ st->vref_reg = NULL;
+ }
+ if (st->vref_reg) {
ret = regulator_enable(st->vref_reg);
if (ret)
goto err_disable_vdd_reg;
diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c
index ae0ca09ae062..1c2dc9b00f31 100644
--- a/drivers/iio/frequency/adf4350.c
+++ b/drivers/iio/frequency/adf4350.c
@@ -14,11 +14,10 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/gcd.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <asm/div64.h>
#include <linux/clk.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -34,6 +33,7 @@ enum {
struct adf4350_state {
struct spi_device *spi;
struct regulator *reg;
+ struct gpio_desc *lock_detect_gpiod;
struct adf4350_platform_data *pdata;
struct clk *clk;
unsigned long clkin;
@@ -61,7 +61,6 @@ static struct adf4350_platform_data default_pdata = {
.r3_user_settings = ADF4350_REG3_12BIT_CLKDIV_MODE(0),
.r4_user_settings = ADF4350_REG4_OUTPUT_PWR(3) |
ADF4350_REG4_MUTE_TILL_LOCK_EN,
- .gpio_lock_detect = -1,
};
static int adf4350_sync_config(struct adf4350_state *st)
@@ -317,8 +316,8 @@ static ssize_t adf4350_read(struct iio_dev *indio_dev,
(u64)st->fpfd;
do_div(val, st->r1_mod * (1 << st->r4_rf_div_sel));
/* PLL unlocked? return error */
- if (gpio_is_valid(st->pdata->gpio_lock_detect))
- if (!gpio_get_value(st->pdata->gpio_lock_detect)) {
+ if (st->lock_detect_gpiod)
+ if (!gpiod_get_value(st->lock_detect_gpiod)) {
dev_dbg(&st->spi->dev, "PLL un-locked\n");
ret = -EBUSY;
}
@@ -381,7 +380,6 @@ static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
struct device_node *np = dev->of_node;
struct adf4350_platform_data *pdata;
unsigned int tmp;
- int ret;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -401,12 +399,6 @@ static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
of_property_read_u32(np, "adi,reference-div-factor", &tmp);
pdata->ref_div_factor = tmp;
- ret = of_get_gpio(np, 0);
- if (ret < 0)
- pdata->gpio_lock_detect = -1;
- else
- pdata->gpio_lock_detect = ret;
-
pdata->ref_doubler_en = of_property_read_bool(np,
"adi,reference-doubler-enable");
pdata->ref_div2_en = of_property_read_bool(np,
@@ -561,16 +553,10 @@ static int adf4350_probe(struct spi_device *spi)
memset(st->regs_hw, 0xFF, sizeof(st->regs_hw));
- if (gpio_is_valid(pdata->gpio_lock_detect)) {
- ret = devm_gpio_request(&spi->dev, pdata->gpio_lock_detect,
- indio_dev->name);
- if (ret) {
- dev_err(&spi->dev, "fail to request lock detect GPIO-%d",
- pdata->gpio_lock_detect);
- goto error_disable_reg;
- }
- gpio_direction_input(pdata->gpio_lock_detect);
- }
+ st->lock_detect_gpiod = devm_gpiod_get_optional(&spi->dev, NULL,
+ GPIOD_IN);
+ if (IS_ERR(st->lock_detect_gpiod))
+ return PTR_ERR(st->lock_detect_gpiod);
if (pdata->power_up_frequency) {
ret = adf4350_set_freq(st, pdata->power_up_frequency);
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 95e6f96d4529..7eaf77707b0b 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -75,26 +75,26 @@ config BMG160_SPI
select REGMAP_SPI
config FXAS21002C
- tristate "NXP FXAS21002C Gyro Sensor"
- select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
- select FXAS21002C_I2C if (I2C)
- select FXAS21002C_SPI if (SPI)
- depends on (I2C || SPI_MASTER)
- help
- Say yes here to build support for NXP FXAS21002C Tri-axis Gyro
- Sensor driver connected via I2C or SPI.
-
- This driver can also be built as a module. If so, the module
- will be called fxas21002c_i2c or fxas21002c_spi.
+ tristate "NXP FXAS21002C Gyro Sensor"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select FXAS21002C_I2C if (I2C)
+ select FXAS21002C_SPI if (SPI)
+ depends on (I2C || SPI_MASTER)
+ help
+ Say yes here to build support for NXP FXAS21002C Tri-axis Gyro
+ Sensor driver connected via I2C or SPI.
+
+ This driver can also be built as a module. If so, the module
+ will be called fxas21002c_i2c or fxas21002c_spi.
config FXAS21002C_I2C
- tristate
- select REGMAP_I2C
+ tristate
+ select REGMAP_I2C
config FXAS21002C_SPI
- tristate
- select REGMAP_SPI
+ tristate
+ select REGMAP_SPI
config HID_SENSOR_GYRO_3D
depends on HID_SENSOR_HUB
diff --git a/drivers/iio/gyro/adis16136.c b/drivers/iio/gyro/adis16136.c
index d637d52d051a..f10c4f173898 100644
--- a/drivers/iio/gyro/adis16136.c
+++ b/drivers/iio/gyro/adis16136.c
@@ -185,12 +185,12 @@ static int adis16136_set_freq(struct adis16136 *adis16136, unsigned int freq)
return adis_write_reg_16(&adis16136->adis, ADIS16136_REG_SMPL_PRD, t);
}
-static int adis16136_get_freq(struct adis16136 *adis16136, unsigned int *freq)
+static int __adis16136_get_freq(struct adis16136 *adis16136, unsigned int *freq)
{
uint16_t t;
int ret;
- ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_SMPL_PRD, &t);
+ ret = __adis_read_reg_16(&adis16136->adis, ADIS16136_REG_SMPL_PRD, &t);
if (ret)
return ret;
@@ -224,10 +224,13 @@ static ssize_t adis16136_read_frequency(struct device *dev,
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct adis16136 *adis16136 = iio_priv(indio_dev);
+ struct mutex *slock = &adis16136->adis.state_lock;
unsigned int freq;
int ret;
- ret = adis16136_get_freq(adis16136, &freq);
+ mutex_lock(slock);
+ ret = __adis16136_get_freq(adis16136, &freq);
+ mutex_unlock(slock);
if (ret)
return ret;
@@ -252,42 +255,50 @@ static const unsigned adis16136_3db_divisors[] = {
static int adis16136_set_filter(struct iio_dev *indio_dev, int val)
{
struct adis16136 *adis16136 = iio_priv(indio_dev);
+ struct mutex *slock = &adis16136->adis.state_lock;
unsigned int freq;
int i, ret;
- ret = adis16136_get_freq(adis16136, &freq);
+ mutex_lock(slock);
+ ret = __adis16136_get_freq(adis16136, &freq);
if (ret)
- return ret;
+ goto out_unlock;
for (i = ARRAY_SIZE(adis16136_3db_divisors) - 1; i >= 1; i--) {
if (freq / adis16136_3db_divisors[i] >= val)
break;
}
- return adis_write_reg_16(&adis16136->adis, ADIS16136_REG_AVG_CNT, i);
+ ret = __adis_write_reg_16(&adis16136->adis, ADIS16136_REG_AVG_CNT, i);
+out_unlock:
+ mutex_unlock(slock);
+
+ return ret;
}
static int adis16136_get_filter(struct iio_dev *indio_dev, int *val)
{
struct adis16136 *adis16136 = iio_priv(indio_dev);
+ struct mutex *slock = &adis16136->adis.state_lock;
unsigned int freq;
uint16_t val16;
int ret;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(slock);
- ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_AVG_CNT, &val16);
+ ret = __adis_read_reg_16(&adis16136->adis, ADIS16136_REG_AVG_CNT,
+ &val16);
if (ret)
goto err_unlock;
- ret = adis16136_get_freq(adis16136, &freq);
+ ret = __adis16136_get_freq(adis16136, &freq);
if (ret)
goto err_unlock;
*val = freq / adis16136_3db_divisors[val16 & 0x07];
err_unlock:
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(slock);
return ret ? ret : IIO_VAL_INT;
}
diff --git a/drivers/iio/gyro/adis16260.c b/drivers/iio/gyro/adis16260.c
index 207a0ce13439..726a0aa321a8 100644
--- a/drivers/iio/gyro/adis16260.c
+++ b/drivers/iio/gyro/adis16260.c
@@ -293,7 +293,7 @@ static int adis16260_write_raw(struct iio_dev *indio_dev,
addr = adis16260_addresses[chan->scan_index][1];
return adis_write_reg_16(adis, addr, val);
case IIO_CHAN_INFO_SAMP_FREQ:
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&adis->state_lock);
if (spi_get_device_id(adis->spi)->driver_data)
t = 256 / val;
else
@@ -308,9 +308,9 @@ static int adis16260_write_raw(struct iio_dev *indio_dev,
adis->spi->max_speed_hz = ADIS16260_SPI_SLOW;
else
adis->spi->max_speed_hz = ADIS16260_SPI_FAST;
- ret = adis_write_reg_8(adis, ADIS16260_SMPL_PRD, t);
+ ret = __adis_write_reg_8(adis, ADIS16260_SMPL_PRD, t);
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&adis->state_lock);
return ret;
}
return -EINVAL;
diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c
index 981ae2291505..b3afa556f973 100644
--- a/drivers/iio/gyro/itg3200_core.c
+++ b/drivers/iio/gyro/itg3200_core.c
@@ -15,7 +15,6 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/module.h>
diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h
index 592f6b34e987..fd9171cc3aba 100644
--- a/drivers/iio/gyro/st_gyro.h
+++ b/drivers/iio/gyro/st_gyro.h
@@ -28,7 +28,7 @@
* struct st_sensors_platform_data - gyro platform data
* @drdy_int_pin: DRDY on gyros is available only on INT2 pin.
*/
-static const struct st_sensors_platform_data gyro_pdata = {
+static __maybe_unused const struct st_sensors_platform_data gyro_pdata = {
.drdy_int_pin = 2,
};
diff --git a/drivers/iio/humidity/hts221_core.c b/drivers/iio/humidity/hts221_core.c
index 4922444771c6..9003671f14fb 100644
--- a/drivers/iio/humidity/hts221_core.c
+++ b/drivers/iio/humidity/hts221_core.c
@@ -24,13 +24,6 @@
#define HTS221_REG_CNTRL1_ADDR 0x20
#define HTS221_REG_CNTRL2_ADDR 0x21
-#define HTS221_REG_AVG_ADDR 0x10
-#define HTS221_REG_H_OUT_L 0x28
-#define HTS221_REG_T_OUT_L 0x2a
-
-#define HTS221_HUMIDITY_AVG_MASK 0x07
-#define HTS221_TEMP_AVG_MASK 0x38
-
#define HTS221_ODR_MASK 0x03
#define HTS221_BDU_MASK BIT(2)
#define HTS221_ENABLE_MASK BIT(7)
@@ -66,8 +59,8 @@ static const struct hts221_odr hts221_odr_table[] = {
static const struct hts221_avg hts221_avg_list[] = {
{
- .addr = HTS221_REG_AVG_ADDR,
- .mask = HTS221_HUMIDITY_AVG_MASK,
+ .addr = 0x10,
+ .mask = 0x07,
.avg_avl = {
4, /* 0.4 %RH */
8, /* 0.3 %RH */
@@ -80,8 +73,8 @@ static const struct hts221_avg hts221_avg_list[] = {
},
},
{
- .addr = HTS221_REG_AVG_ADDR,
- .mask = HTS221_TEMP_AVG_MASK,
+ .addr = 0x10,
+ .mask = 0x38,
.avg_avl = {
2, /* 0.08 degC */
4, /* 0.05 degC */
@@ -98,7 +91,7 @@ static const struct hts221_avg hts221_avg_list[] = {
static const struct iio_chan_spec hts221_channels[] = {
{
.type = IIO_HUMIDITYRELATIVE,
- .address = HTS221_REG_H_OUT_L,
+ .address = 0x28,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
@@ -114,7 +107,7 @@ static const struct iio_chan_spec hts221_channels[] = {
},
{
.type = IIO_TEMP,
- .address = HTS221_REG_T_OUT_L,
+ .address = 0x2a,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
diff --git a/drivers/iio/iio_core.h b/drivers/iio/iio_core.h
index 159ea3f8c02b..fd9a5f1d5e51 100644
--- a/drivers/iio/iio_core.h
+++ b/drivers/iio/iio_core.h
@@ -42,14 +42,14 @@ struct poll_table_struct;
__poll_t iio_buffer_poll(struct file *filp,
struct poll_table_struct *wait);
-ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
- size_t n, loff_t *f_ps);
+ssize_t iio_buffer_read_outer(struct file *filp, char __user *buf,
+ size_t n, loff_t *f_ps);
int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev);
void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev);
#define iio_buffer_poll_addr (&iio_buffer_poll)
-#define iio_buffer_read_first_n_outer_addr (&iio_buffer_read_first_n_outer)
+#define iio_buffer_read_outer_addr (&iio_buffer_read_outer)
void iio_disable_all_buffers(struct iio_dev *indio_dev);
void iio_buffer_wakeup_poll(struct iio_dev *indio_dev);
@@ -57,7 +57,7 @@ void iio_buffer_wakeup_poll(struct iio_dev *indio_dev);
#else
#define iio_buffer_poll_addr NULL
-#define iio_buffer_read_first_n_outer_addr NULL
+#define iio_buffer_read_outer_addr NULL
static inline int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
{
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index e14c8536fd09..9ba4a7c8e7ad 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -26,7 +26,14 @@
#define ADIS_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
#define ADIS_GLOB_CMD_SW_RESET BIT(7)
-int adis_write_reg(struct adis *adis, unsigned int reg,
+/**
+ * __adis_write_reg() - write N bytes to register (unlocked version)
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @value: The value to write to device (up to 4 bytes)
+ * @size: The size of the @value (in bytes)
+ */
+int __adis_write_reg(struct adis *adis, unsigned int reg,
unsigned int value, unsigned int size)
{
unsigned int page = reg / ADIS_PAGE_SIZE;
@@ -70,8 +77,6 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
},
};
- mutex_lock(&adis->txrx_lock);
-
spi_message_init(&msg);
if (adis->current_page != page) {
@@ -96,8 +101,7 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
adis->tx[3] = value & 0xff;
break;
default:
- ret = -EINVAL;
- goto out_unlock;
+ return -EINVAL;
}
xfers[size].cs_change = 0;
@@ -113,20 +117,18 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
adis->current_page = page;
}
-out_unlock:
- mutex_unlock(&adis->txrx_lock);
-
return ret;
}
-EXPORT_SYMBOL_GPL(adis_write_reg);
+EXPORT_SYMBOL_GPL(__adis_write_reg);
/**
- * adis_read_reg() - read 2 bytes from a 16-bit register
+ * __adis_read_reg() - read N bytes from register (unlocked version)
* @adis: The adis device
* @reg: The address of the lower of the two registers
* @val: The value read back from the device
+ * @size: The size of the @val buffer
*/
-int adis_read_reg(struct adis *adis, unsigned int reg,
+int __adis_read_reg(struct adis *adis, unsigned int reg,
unsigned int *val, unsigned int size)
{
unsigned int page = reg / ADIS_PAGE_SIZE;
@@ -166,7 +168,6 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
},
};
- mutex_lock(&adis->txrx_lock);
spi_message_init(&msg);
if (adis->current_page != page) {
@@ -188,15 +189,14 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
spi_message_add_tail(&xfers[3], &msg);
break;
default:
- ret = -EINVAL;
- goto out_unlock;
+ return -EINVAL;
}
ret = spi_sync(adis->spi, &msg);
if (ret) {
dev_err(&adis->spi->dev, "Failed to read register 0x%02X: %d\n",
reg, ret);
- goto out_unlock;
+ return ret;
} else {
adis->current_page = page;
}
@@ -210,12 +210,9 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
break;
}
-out_unlock:
- mutex_unlock(&adis->txrx_lock);
-
return ret;
}
-EXPORT_SYMBOL_GPL(adis_read_reg);
+EXPORT_SYMBOL_GPL(__adis_read_reg);
#ifdef CONFIG_DEBUG_FS
@@ -253,12 +250,16 @@ int adis_enable_irq(struct adis *adis, bool enable)
int ret = 0;
uint16_t msc;
- if (adis->data->enable_irq)
- return adis->data->enable_irq(adis, enable);
+ mutex_lock(&adis->state_lock);
+
+ if (adis->data->enable_irq) {
+ ret = adis->data->enable_irq(adis, enable);
+ goto out_unlock;
+ }
- ret = adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
+ ret = __adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
if (ret)
- goto error_ret;
+ goto out_unlock;
msc |= ADIS_MSC_CTRL_DATA_RDY_POL_HIGH;
msc &= ~ADIS_MSC_CTRL_DATA_RDY_DIO2;
@@ -267,26 +268,27 @@ int adis_enable_irq(struct adis *adis, bool enable)
else
msc &= ~ADIS_MSC_CTRL_DATA_RDY_EN;
- ret = adis_write_reg_16(adis, adis->data->msc_ctrl_reg, msc);
+ ret = __adis_write_reg_16(adis, adis->data->msc_ctrl_reg, msc);
-error_ret:
+out_unlock:
+ mutex_unlock(&adis->state_lock);
return ret;
}
EXPORT_SYMBOL(adis_enable_irq);
/**
- * adis_check_status() - Check the device for error conditions
+ * __adis_check_status() - Check the device for error conditions (unlocked)
* @adis: The adis device
*
* Returns 0 on success, a negative error code otherwise
*/
-int adis_check_status(struct adis *adis)
+int __adis_check_status(struct adis *adis)
{
uint16_t status;
int ret;
int i;
- ret = adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
+ ret = __adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
if (ret)
return ret;
@@ -304,32 +306,32 @@ int adis_check_status(struct adis *adis)
return -EIO;
}
-EXPORT_SYMBOL_GPL(adis_check_status);
+EXPORT_SYMBOL_GPL(__adis_check_status);
/**
- * adis_reset() - Reset the device
+ * __adis_reset() - Reset the device (unlocked version)
* @adis: The adis device
*
* Returns 0 on success, a negative error code otherwise
*/
-int adis_reset(struct adis *adis)
+int __adis_reset(struct adis *adis)
{
int ret;
- ret = adis_write_reg_8(adis, adis->data->glob_cmd_reg,
+ ret = __adis_write_reg_8(adis, adis->data->glob_cmd_reg,
ADIS_GLOB_CMD_SW_RESET);
if (ret)
dev_err(&adis->spi->dev, "Failed to reset device: %d\n", ret);
return ret;
}
-EXPORT_SYMBOL_GPL(adis_reset);
+EXPORT_SYMBOL_GPL(__adis_reset);
static int adis_self_test(struct adis *adis)
{
int ret;
- ret = adis_write_reg_16(adis, adis->data->msc_ctrl_reg,
+ ret = __adis_write_reg_16(adis, adis->data->msc_ctrl_reg,
adis->data->self_test_mask);
if (ret) {
dev_err(&adis->spi->dev, "Failed to initiate self test: %d\n",
@@ -339,10 +341,10 @@ static int adis_self_test(struct adis *adis)
msleep(adis->data->startup_delay);
- ret = adis_check_status(adis);
+ ret = __adis_check_status(adis);
if (adis->data->self_test_no_autoclear)
- adis_write_reg_16(adis, adis->data->msc_ctrl_reg, 0x00);
+ __adis_write_reg_16(adis, adis->data->msc_ctrl_reg, 0x00);
return ret;
}
@@ -360,19 +362,23 @@ int adis_initial_startup(struct adis *adis)
{
int ret;
+ mutex_lock(&adis->state_lock);
+
ret = adis_self_test(adis);
if (ret) {
dev_err(&adis->spi->dev, "Self-test failed, trying reset.\n");
- adis_reset(adis);
+ __adis_reset(adis);
msleep(adis->data->startup_delay);
ret = adis_self_test(adis);
if (ret) {
dev_err(&adis->spi->dev, "Second self-test failed, giving up.\n");
- return ret;
+ goto out_unlock;
}
}
- return 0;
+out_unlock:
+ mutex_unlock(&adis->state_lock);
+ return ret;
}
EXPORT_SYMBOL_GPL(adis_initial_startup);
@@ -398,15 +404,15 @@ int adis_single_conversion(struct iio_dev *indio_dev,
unsigned int uval;
int ret;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&adis->state_lock);
- ret = adis_read_reg(adis, chan->address, &uval,
+ ret = __adis_read_reg(adis, chan->address, &uval,
chan->scan_type.storagebits / 8);
if (ret)
goto err_unlock;
if (uval & error_mask) {
- ret = adis_check_status(adis);
+ ret = __adis_check_status(adis);
if (ret)
goto err_unlock;
}
@@ -418,7 +424,7 @@ int adis_single_conversion(struct iio_dev *indio_dev,
ret = IIO_VAL_INT;
err_unlock:
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&adis->state_lock);
return ret;
}
EXPORT_SYMBOL_GPL(adis_single_conversion);
@@ -438,7 +444,7 @@ EXPORT_SYMBOL_GPL(adis_single_conversion);
int adis_init(struct adis *adis, struct iio_dev *indio_dev,
struct spi_device *spi, const struct adis_data *data)
{
- mutex_init(&adis->txrx_lock);
+ mutex_init(&adis->state_lock);
adis->spi = spi;
adis->data = data;
iio_device_set_drvdata(indio_dev, adis);
diff --git a/drivers/iio/imu/adis16400.c b/drivers/iio/imu/adis16400.c
index 44e46dc96e00..662cb5367c11 100644
--- a/drivers/iio/imu/adis16400.c
+++ b/drivers/iio/imu/adis16400.c
@@ -162,6 +162,7 @@ struct adis16400_chip_info {
unsigned int accel_scale_micro;
int temp_scale_nano;
int temp_offset;
+ /* set_freq() & get_freq() need to avoid using ADIS lib's state lock */
int (*set_freq)(struct adis16400_state *st, unsigned int freq);
int (*get_freq)(struct adis16400_state *st);
};
@@ -326,7 +327,7 @@ static int adis16334_get_freq(struct adis16400_state *st)
int ret;
uint16_t t;
- ret = adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
+ ret = __adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
if (ret)
return ret;
@@ -350,7 +351,7 @@ static int adis16334_set_freq(struct adis16400_state *st, unsigned int freq)
t <<= ADIS16334_RATE_DIV_SHIFT;
t |= ADIS16334_RATE_INT_CLK;
- return adis_write_reg_16(&st->adis, ADIS16400_SMPL_PRD, t);
+ return __adis_write_reg_16(&st->adis, ADIS16400_SMPL_PRD, t);
}
static int adis16400_get_freq(struct adis16400_state *st)
@@ -358,7 +359,7 @@ static int adis16400_get_freq(struct adis16400_state *st)
int sps, ret;
uint16_t t;
- ret = adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
+ ret = __adis_read_reg_16(&st->adis, ADIS16400_SMPL_PRD, &t);
if (ret)
return ret;
@@ -390,7 +391,7 @@ static int adis16400_set_freq(struct adis16400_state *st, unsigned int freq)
else
st->adis.spi->max_speed_hz = ADIS16400_SPI_FAST;
- return adis_write_reg_8(&st->adis, ADIS16400_SMPL_PRD, val);
+ return __adis_write_reg_8(&st->adis, ADIS16400_SMPL_PRD, val);
}
static const unsigned int adis16400_3db_divisors[] = {
@@ -404,7 +405,7 @@ static const unsigned int adis16400_3db_divisors[] = {
[7] = 200, /* Not a valid setting */
};
-static int adis16400_set_filter(struct iio_dev *indio_dev, int sps, int val)
+static int __adis16400_set_filter(struct iio_dev *indio_dev, int sps, int val)
{
struct adis16400_state *st = iio_priv(indio_dev);
uint16_t val16;
@@ -415,11 +416,11 @@ static int adis16400_set_filter(struct iio_dev *indio_dev, int sps, int val)
break;
}
- ret = adis_read_reg_16(&st->adis, ADIS16400_SENS_AVG, &val16);
+ ret = __adis_read_reg_16(&st->adis, ADIS16400_SENS_AVG, &val16);
if (ret)
return ret;
- ret = adis_write_reg_16(&st->adis, ADIS16400_SENS_AVG,
+ ret = __adis_write_reg_16(&st->adis, ADIS16400_SENS_AVG,
(val16 & ~0x07) | i);
return ret;
}
@@ -507,32 +508,31 @@ static int adis16400_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long info)
{
struct adis16400_state *st = iio_priv(indio_dev);
+ struct mutex *slock = &st->adis.state_lock;
int ret, sps;
switch (info) {
case IIO_CHAN_INFO_CALIBBIAS:
- mutex_lock(&indio_dev->mlock);
ret = adis_write_reg_16(&st->adis,
adis16400_addresses[chan->scan_index], val);
- mutex_unlock(&indio_dev->mlock);
return ret;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
/*
* Need to cache values so we can update if the frequency
* changes.
*/
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(slock);
st->filt_int = val;
/* Work out update to current value */
sps = st->variant->get_freq(st);
if (sps < 0) {
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(slock);
return sps;
}
- ret = adis16400_set_filter(indio_dev, sps,
+ ret = __adis16400_set_filter(indio_dev, sps,
val * 1000 + val2 / 1000);
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(slock);
return ret;
case IIO_CHAN_INFO_SAMP_FREQ:
sps = val * 1000 + val2 / 1000;
@@ -540,9 +540,9 @@ static int adis16400_write_raw(struct iio_dev *indio_dev,
if (sps <= 0)
return -EINVAL;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(slock);
ret = st->variant->set_freq(st, sps);
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(slock);
return ret;
default:
return -EINVAL;
@@ -553,6 +553,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long info)
{
struct adis16400_state *st = iio_priv(indio_dev);
+ struct mutex *slock = &st->adis.state_lock;
int16_t val16;
int ret;
@@ -596,10 +597,8 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
case IIO_CHAN_INFO_CALIBBIAS:
- mutex_lock(&indio_dev->mlock);
ret = adis_read_reg_16(&st->adis,
adis16400_addresses[chan->scan_index], &val16);
- mutex_unlock(&indio_dev->mlock);
if (ret)
return ret;
val16 = sign_extend32(val16, 11);
@@ -610,27 +609,27 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
*val = st->variant->temp_offset;
return IIO_VAL_INT;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(slock);
/* Need both the number of taps and the sampling frequency */
- ret = adis_read_reg_16(&st->adis,
+ ret = __adis_read_reg_16(&st->adis,
ADIS16400_SENS_AVG,
&val16);
if (ret) {
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(slock);
return ret;
}
ret = st->variant->get_freq(st);
- if (ret >= 0) {
- ret /= adis16400_3db_divisors[val16 & 0x07];
- *val = ret / 1000;
- *val2 = (ret % 1000) * 1000;
- }
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(slock);
if (ret)
return ret;
+ ret /= adis16400_3db_divisors[val16 & 0x07];
+ *val = ret / 1000;
+ *val2 = (ret % 1000) * 1000;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
+ mutex_lock(slock);
ret = st->variant->get_freq(st);
+ mutex_unlock(slock);
if (ret)
return ret;
*val = ret / 1000;
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index 748f8bbf184d..f73094e8d35d 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -555,6 +555,7 @@ static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int freq)
{
struct adis16480 *st = iio_priv(indio_dev);
+ struct mutex *slock = &st->adis.state_lock;
unsigned int enable_mask, offset, reg;
unsigned int diff, best_diff;
unsigned int i, best_freq;
@@ -565,9 +566,11 @@ static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
offset = ad16480_filter_data[chan->scan_index][1];
enable_mask = BIT(offset + 2);
- ret = adis_read_reg_16(&st->adis, reg, &val);
+ mutex_lock(slock);
+
+ ret = __adis_read_reg_16(&st->adis, reg, &val);
if (ret)
- return ret;
+ goto out_unlock;
if (freq == 0) {
val &= ~enable_mask;
@@ -589,7 +592,11 @@ static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
val |= enable_mask;
}
- return adis_write_reg_16(&st->adis, reg, val);
+ ret = __adis_write_reg_16(&st->adis, reg, val);
+out_unlock:
+ mutex_unlock(slock);
+
+ return ret;
}
static int adis16480_read_raw(struct iio_dev *indio_dev,
@@ -947,14 +954,14 @@ static int adis16480_enable_irq(struct adis *adis, bool enable)
uint16_t val;
int ret;
- ret = adis_read_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, &val);
+ ret = __adis_read_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, &val);
if (ret)
return ret;
val &= ~ADIS16480_DRDY_EN_MSK;
val |= ADIS16480_DRDY_EN(enable);
- return adis_write_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, val);
+ return __adis_write_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, val);
}
static int adis16480_initial_setup(struct iio_dev *indio_dev)
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index 4998a89d083d..3f4dd5c00b03 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -129,7 +129,7 @@ static irqreturn_t adis_trigger_handler(int irq, void *p)
return -ENOMEM;
if (adis->data->has_paging) {
- mutex_lock(&adis->txrx_lock);
+ mutex_lock(&adis->state_lock);
if (adis->current_page != 0) {
adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
adis->tx[1] = 0;
@@ -144,7 +144,7 @@ static irqreturn_t adis_trigger_handler(int irq, void *p)
if (adis->data->has_paging) {
adis->current_page = 0;
- mutex_unlock(&adis->txrx_lock);
+ mutex_unlock(&adis->state_lock);
}
iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer,
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index e4c4c12236a7..017bc0fcc365 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -10,11 +10,12 @@ config INV_MPU6050_IIO
config INV_MPU6050_I2C
tristate "Invensense MPU6050 devices (I2C)"
- depends on I2C_MUX
+ depends on I2C
+ select I2C_MUX
select INV_MPU6050_IIO
select REGMAP_I2C
help
- This driver supports the Invensense MPU6000/6050/6500/6515,
+ This driver supports the Invensense MPU6050/6500/6515,
MPU9150/9250/9255 and ICM20608/20602 motion tracking devices
over I2C.
This driver can be built as a module. The module will be called
@@ -26,8 +27,8 @@ config INV_MPU6050_SPI
select INV_MPU6050_IIO
select REGMAP_SPI
help
- This driver supports the Invensense MPU6000/6050/6500/6515,
- MPU9150/9250/9255 and ICM20608/20602 motion tracking devices
+ This driver supports the Invensense MPU6000/6500/6515,
+ MPU9250/9255 and ICM20608/20602 motion tracking devices
over SPI.
This driver can be built as a module. The module will be called
inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 0686e41bb8a1..268240644adf 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -915,6 +915,33 @@ static const unsigned long inv_mpu_scan_masks[] = {
.ext_info = inv_ext_info, \
}
+static const struct iio_chan_spec inv_mpu9150_channels[] = {
+ IIO_CHAN_SOFT_TIMESTAMP(INV_MPU9X50_SCAN_TIMESTAMP),
+ /*
+ * Note that temperature should only be via polled reading only,
+ * not the final scan elements output.
+ */
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
+ | BIT(IIO_CHAN_INFO_OFFSET)
+ | BIT(IIO_CHAN_INFO_SCALE),
+ .scan_index = -1,
+ },
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z),
+
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
+
+ /* Magnetometer resolution is 13 bits */
+ INV_MPU9X50_MAGN_CHAN(IIO_MOD_X, 13, INV_MPU9X50_SCAN_MAGN_X),
+ INV_MPU9X50_MAGN_CHAN(IIO_MOD_Y, 13, INV_MPU9X50_SCAN_MAGN_Y),
+ INV_MPU9X50_MAGN_CHAN(IIO_MOD_Z, 13, INV_MPU9X50_SCAN_MAGN_Z),
+};
+
static const struct iio_chan_spec inv_mpu9250_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(INV_MPU9X50_SCAN_TIMESTAMP),
/*
@@ -1324,21 +1351,16 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
inv_mpu_bus_setup(indio_dev);
switch (chip_type) {
+ case INV_MPU9150:
+ indio_dev->channels = inv_mpu9150_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_mpu9150_channels);
+ indio_dev->available_scan_masks = inv_mpu9x50_scan_masks;
+ break;
case INV_MPU9250:
case INV_MPU9255:
- /*
- * Use magnetometer inside the chip only if there is no i2c
- * auxiliary device in use.
- */
- if (!st->magn_disabled) {
- indio_dev->channels = inv_mpu9250_channels;
- indio_dev->num_channels = ARRAY_SIZE(inv_mpu9250_channels);
- indio_dev->available_scan_masks = inv_mpu9x50_scan_masks;
- } else {
- indio_dev->channels = inv_mpu_channels;
- indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
- indio_dev->available_scan_masks = inv_mpu_scan_masks;
- }
+ indio_dev->channels = inv_mpu9250_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_mpu9250_channels);
+ indio_dev->available_scan_masks = inv_mpu9x50_scan_masks;
break;
case INV_ICM20602:
indio_dev->channels = inv_icm20602_channels;
@@ -1351,6 +1373,15 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
indio_dev->available_scan_masks = inv_mpu_scan_masks;
break;
}
+ /*
+ * Use magnetometer inside the chip only if there is no i2c
+ * auxiliary device in use. Otherwise Going back to 6-axis only.
+ */
+ if (st->magn_disabled) {
+ indio_dev->channels = inv_mpu_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+ indio_dev->available_scan_masks = inv_mpu_scan_masks;
+ }
indio_dev->info = &mpu_info;
indio_dev->modes = INDIO_BUFFER_TRIGGERED;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index 389cc8505e0e..f47a28b4be23 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -77,6 +77,7 @@ static bool inv_mpu_i2c_aux_bus(struct device *dev)
case INV_ICM20602:
/* no i2c auxiliary bus on the chip */
return false;
+ case INV_MPU9150:
case INV_MPU9250:
case INV_MPU9255:
if (st->magn_disabled)
@@ -102,6 +103,7 @@ static int inv_mpu_magn_disable(struct iio_dev *indio_dev)
struct device_node *mux_node;
switch (st->chip_type) {
+ case INV_MPU9150:
case INV_MPU9250:
case INV_MPU9255:
mux_node = of_get_child_by_name(dev->of_node, "i2c-gate");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
index 02735af152c8..4f192352521e 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c
@@ -12,7 +12,9 @@
#include "inv_mpu_magn.h"
/*
- * MPU9250 magnetometer is an AKM AK8963 chip on I2C aux bus
+ * MPU9xxx magnetometer are AKM chips on I2C aux bus
+ * MPU9150 is AK8975
+ * MPU9250 is AK8963
*/
#define INV_MPU_MAGN_I2C_ADDR 0x0C
@@ -33,10 +35,10 @@
#define INV_MPU_MAGN_BITS_MODE_PWDN 0x00
#define INV_MPU_MAGN_BITS_MODE_SINGLE 0x01
#define INV_MPU_MAGN_BITS_MODE_FUSE 0x0F
-#define INV_MPU_MAGN_BIT_OUTPUT_BIT 0x10
+#define INV_MPU9250_MAGN_BIT_OUTPUT_BIT 0x10
-#define INV_MPU_MAGN_REG_CNTL2 0x0B
-#define INV_MPU_MAGN_BIT_SRST 0x01
+#define INV_MPU9250_MAGN_REG_CNTL2 0x0B
+#define INV_MPU9250_MAGN_BIT_SRST 0x01
#define INV_MPU_MAGN_REG_ASAX 0x10
#define INV_MPU_MAGN_REG_ASAY 0x11
@@ -48,6 +50,7 @@
static bool inv_magn_supported(const struct inv_mpu6050_state *st)
{
switch (st->chip_type) {
+ case INV_MPU9150:
case INV_MPU9250:
case INV_MPU9255:
return true;
@@ -61,6 +64,7 @@ static int inv_magn_init(struct inv_mpu6050_state *st)
{
uint8_t val;
uint8_t asa[3];
+ int32_t sensitivity;
int ret;
/* check whoami */
@@ -71,12 +75,19 @@ static int inv_magn_init(struct inv_mpu6050_state *st)
if (val != INV_MPU_MAGN_BITS_WIA)
return -ENODEV;
- /* reset chip */
- ret = inv_mpu_aux_write(st, INV_MPU_MAGN_I2C_ADDR,
- INV_MPU_MAGN_REG_CNTL2,
- INV_MPU_MAGN_BIT_SRST);
- if (ret)
- return ret;
+ /* software reset for MPU925x only */
+ switch (st->chip_type) {
+ case INV_MPU9250:
+ case INV_MPU9255:
+ ret = inv_mpu_aux_write(st, INV_MPU_MAGN_I2C_ADDR,
+ INV_MPU9250_MAGN_REG_CNTL2,
+ INV_MPU9250_MAGN_BIT_SRST);
+ if (ret)
+ return ret;
+ break;
+ default:
+ break;
+ }
/* read fuse ROM data */
ret = inv_mpu_aux_write(st, INV_MPU_MAGN_I2C_ADDR,
@@ -98,22 +109,36 @@ static int inv_magn_init(struct inv_mpu6050_state *st)
return ret;
/*
+ * Sensor sentivity
+ * 1 uT = 0.01 G and value is in micron (1e6)
+ * sensitvity = x uT * 0.01 * 1e6
+ */
+ switch (st->chip_type) {
+ case INV_MPU9150:
+ /* sensor sensitivity is 0.3 uT */
+ sensitivity = 3000;
+ break;
+ case INV_MPU9250:
+ case INV_MPU9255:
+ /* sensor sensitivity in 16 bits mode: 0.15 uT */
+ sensitivity = 1500;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
* Sensitivity adjustement and scale to Gauss
*
* Hadj = H * (((ASA - 128) * 0.5 / 128) + 1)
* Factor simplification:
* Hadj = H * ((ASA + 128) / 256)
*
- * Sensor sentivity
- * 0.15 uT in 16 bits mode
- * 1 uT = 0.01 G and value is in micron (1e6)
- * sensitvity = 0.15 uT * 0.01 * 1e6
- *
- * raw_to_gauss = Hadj * 1500
+ * raw_to_gauss = Hadj * sensitivity
*/
- st->magn_raw_to_gauss[0] = (((int32_t)asa[0] + 128) * 1500) / 256;
- st->magn_raw_to_gauss[1] = (((int32_t)asa[1] + 128) * 1500) / 256;
- st->magn_raw_to_gauss[2] = (((int32_t)asa[2] + 128) * 1500) / 256;
+ st->magn_raw_to_gauss[0] = (((int32_t)asa[0] + 128) * sensitivity) / 256;
+ st->magn_raw_to_gauss[1] = (((int32_t)asa[1] + 128) * sensitivity) / 256;
+ st->magn_raw_to_gauss[2] = (((int32_t)asa[2] + 128) * sensitivity) / 256;
return 0;
}
@@ -129,6 +154,7 @@ static int inv_magn_init(struct inv_mpu6050_state *st)
*/
int inv_mpu_magn_probe(struct inv_mpu6050_state *st)
{
+ uint8_t val;
int ret;
/* quit if chip is not supported */
@@ -179,10 +205,17 @@ int inv_mpu_magn_probe(struct inv_mpu6050_state *st)
if (ret)
return ret;
- /* add 16 bits mode */
- ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_DO(1),
- INV_MPU_MAGN_BITS_MODE_SINGLE |
- INV_MPU_MAGN_BIT_OUTPUT_BIT);
+ /* add 16 bits mode for MPU925x */
+ val = INV_MPU_MAGN_BITS_MODE_SINGLE;
+ switch (st->chip_type) {
+ case INV_MPU9250:
+ case INV_MPU9255:
+ val |= INV_MPU9250_MAGN_BIT_OUTPUT_BIT;
+ break;
+ default:
+ break;
+ }
+ ret = regmap_write(st->map, INV_MPU6050_REG_I2C_SLV_DO(1), val);
if (ret)
return ret;
@@ -237,6 +270,7 @@ int inv_mpu_magn_set_orient(struct inv_mpu6050_state *st)
/* fill magnetometer orientation */
switch (st->chip_type) {
+ case INV_MPU9150:
case INV_MPU9250:
case INV_MPU9255:
/* x <- y */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index 142692fc0758..ec102d5a5c77 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -74,7 +74,6 @@ static int inv_mpu_probe(struct spi_device *spi)
static const struct spi_device_id inv_mpu_id[] = {
{"mpu6000", INV_MPU6000},
{"mpu6500", INV_MPU6500},
- {"mpu9150", INV_MPU9150},
{"mpu9250", INV_MPU9250},
{"mpu9255", INV_MPU9255},
{"icm20608", INV_ICM20608},
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
index d7d951927a44..a9c75bc62f18 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
@@ -50,6 +50,7 @@ static void inv_scan_query(struct iio_dev *indio_dev)
struct inv_mpu6050_state *st = iio_priv(indio_dev);
switch (st->chip_type) {
+ case INV_MPU9150:
case INV_MPU9250:
case INV_MPU9255:
return inv_scan_query_mpu9x50(indio_dev);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index dc55d7dff3eb..c08f57226ebb 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -176,21 +176,38 @@ struct st_lsm6dsx_hw_ts_settings {
* @pullup_en: i2c controller pull-up register info (addr + mask).
* @aux_sens: aux sensor register info (addr + mask).
* @wr_once: write_once register info (addr + mask).
+ * @emb_func: embedded function register info (addr + mask).
+ * @num_ext_dev: max number of slave devices.
* @shub_out: sensor hub first output register info.
* @slv0_addr: slave0 address in secondary page.
* @dw_slv0_addr: slave0 write register address in secondary page.
* @batch_en: Enable/disable FIFO batching.
+ * @pause: controller pause value.
*/
struct st_lsm6dsx_shub_settings {
struct st_lsm6dsx_reg page_mux;
- struct st_lsm6dsx_reg master_en;
- struct st_lsm6dsx_reg pullup_en;
+ struct {
+ bool sec_page;
+ u8 addr;
+ u8 mask;
+ } master_en;
+ struct {
+ bool sec_page;
+ u8 addr;
+ u8 mask;
+ } pullup_en;
struct st_lsm6dsx_reg aux_sens;
struct st_lsm6dsx_reg wr_once;
- u8 shub_out;
+ struct st_lsm6dsx_reg emb_func;
+ u8 num_ext_dev;
+ struct {
+ bool sec_page;
+ u8 addr;
+ } shub_out;
u8 slv0_addr;
u8 dw_slv0_addr;
u8 batch_en;
+ u8 pause;
};
struct st_lsm6dsx_event_settings {
@@ -389,14 +406,17 @@ struct st_lsm6dsx_hw {
const struct st_lsm6dsx_settings *settings;
};
-static const struct iio_event_spec st_lsm6dsx_event = {
+static __maybe_unused const struct iio_event_spec st_lsm6dsx_event = {
.type = IIO_EV_TYPE_THRESH,
.dir = IIO_EV_DIR_EITHER,
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE)
};
-static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
+static __maybe_unused const unsigned long st_lsm6dsx_available_scan_masks[] = {
+ 0x7, 0x0,
+};
+
extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index cb536b81a1c2..bb899345f2bb 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -336,12 +336,13 @@ static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
*/
int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
{
+ struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
+ int err, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
- int err, acc_sip, gyro_sip, ts_sip, read_len, offset;
- struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor;
u8 gyro_buff[ST_LSM6DSX_IIO_BUFF_SIZE];
u8 acc_buff[ST_LSM6DSX_IIO_BUFF_SIZE];
+ u8 ext_buff[ST_LSM6DSX_IIO_BUFF_SIZE];
bool reset_ts = false;
__le16 fifo_status;
s64 ts = 0;
@@ -364,6 +365,8 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
acc_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]);
+ if (hw->iio_devs[ST_LSM6DSX_ID_EXT0])
+ ext_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_EXT0]);
for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
err = st_lsm6dsx_read_block(hw, ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
@@ -391,12 +394,13 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
* following pattern is repeated every 9 samples:
* - Gx, Gy, Gz, Ax, Ay, Az, Ts, Gx, Gy, Gz, Ts, Gx, ..
*/
+ ext_sip = ext_sensor ? ext_sensor->sip : 0;
gyro_sip = gyro_sensor->sip;
acc_sip = acc_sensor->sip;
ts_sip = hw->ts_sip;
offset = 0;
- while (acc_sip > 0 || gyro_sip > 0) {
+ while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
if (gyro_sip > 0) {
memcpy(gyro_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
@@ -407,6 +411,11 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
+ if (ext_sip > 0) {
+ memcpy(ext_buff, &hw->buff[offset],
+ ST_LSM6DSX_SAMPLE_SIZE);
+ offset += ST_LSM6DSX_SAMPLE_SIZE;
+ }
if (ts_sip-- > 0) {
u8 data[ST_LSM6DSX_SAMPLE_SIZE];
@@ -440,6 +449,10 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_ACC],
acc_buff, acc_sensor->ts_ref + ts);
+ if (ext_sip-- > 0)
+ iio_push_to_buffers_with_timestamp(
+ hw->iio_devs[ST_LSM6DSX_ID_EXT0],
+ ext_buff, ext_sensor->ts_ref + ts);
}
}
@@ -638,12 +651,12 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
err = st_lsm6dsx_sensor_set_enable(sensor, enable);
if (err < 0)
goto out;
-
- err = st_lsm6dsx_set_fifo_odr(sensor, enable);
- if (err < 0)
- goto out;
}
+ err = st_lsm6dsx_set_fifo_odr(sensor, enable);
+ if (err < 0)
+ goto out;
+
err = st_lsm6dsx_update_decimators(hw);
if (err < 0)
goto out;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index a7d40c02ce6b..d205b994a9e0 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -54,6 +54,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pm.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/bitfield.h>
@@ -655,6 +656,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.addr = 0x08,
.mask = GENMASK(5, 3),
},
+ [ST_LSM6DSX_ID_EXT0] = {
+ .addr = 0x09,
+ .mask = GENMASK(2, 0),
+ },
},
.fifo_ops = {
.update_fifo = st_lsm6dsx_update_fifo,
@@ -687,6 +692,39 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = GENMASK(5, 3),
},
},
+ .shub_settings = {
+ .page_mux = {
+ .addr = 0x01,
+ .mask = BIT(7),
+ },
+ .master_en = {
+ .addr = 0x1a,
+ .mask = BIT(0),
+ },
+ .pullup_en = {
+ .addr = 0x1a,
+ .mask = BIT(3),
+ },
+ .aux_sens = {
+ .addr = 0x04,
+ .mask = GENMASK(5, 4),
+ },
+ .wr_once = {
+ .addr = 0x07,
+ .mask = BIT(5),
+ },
+ .emb_func = {
+ .addr = 0x19,
+ .mask = BIT(2),
+ },
+ .num_ext_dev = 1,
+ .shub_out = {
+ .addr = 0x2e,
+ },
+ .slv0_addr = 0x02,
+ .dw_slv0_addr = 0x0e,
+ .pause = 0x7,
+ },
.event_settings = {
.enable_reg = {
.addr = 0x58,
@@ -867,10 +905,12 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = BIT(6),
},
.master_en = {
+ .sec_page = true,
.addr = 0x14,
.mask = BIT(2),
},
.pullup_en = {
+ .sec_page = true,
.addr = 0x14,
.mask = BIT(3),
},
@@ -882,7 +922,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.addr = 0x14,
.mask = BIT(6),
},
- .shub_out = 0x02,
+ .num_ext_dev = 3,
+ .shub_out = {
+ .sec_page = true,
+ .addr = 0x02,
+ },
.slv0_addr = 0x15,
.dw_slv0_addr = 0x21,
.batch_en = BIT(3),
@@ -1241,10 +1285,12 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = BIT(6),
},
.master_en = {
+ .sec_page = true,
.addr = 0x14,
.mask = BIT(2),
},
.pullup_en = {
+ .sec_page = true,
.addr = 0x14,
.mask = BIT(3),
},
@@ -1256,7 +1302,11 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.addr = 0x14,
.mask = BIT(6),
},
- .shub_out = 0x02,
+ .num_ext_dev = 3,
+ .shub_out = {
+ .sec_page = true,
+ .addr = 0x02,
+ },
.slv0_addr = 0x15,
.dw_slv0_addr = 0x21,
.batch_en = BIT(3),
@@ -1608,11 +1658,11 @@ static int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, int state)
}
static int st_lsm6dsx_read_event(struct iio_dev *iio_dev,
- const struct iio_chan_spec *chan,
- enum iio_event_type type,
- enum iio_event_direction dir,
- enum iio_event_info info,
- int *val, int *val2)
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
{
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
struct st_lsm6dsx_hw *hw = sensor->hw;
@@ -1826,14 +1876,14 @@ static const struct iio_info st_lsm6dsx_gyro_info = {
.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
};
-static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
+static int st_lsm6dsx_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
{
- struct device_node *np = hw->dev->of_node;
+ struct device *dev = hw->dev;
- if (!np)
+ if (!dev_fwnode(dev))
return -EINVAL;
- return of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
+ return device_property_read_u32(dev, "st,drdy-int-pin", drdy_pin);
}
static int
@@ -1842,7 +1892,7 @@ st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
{
int err = 0, drdy_pin;
- if (st_lsm6dsx_of_get_drdy_pin(hw, &drdy_pin) < 0) {
+ if (st_lsm6dsx_get_drdy_pin(hw, &drdy_pin) < 0) {
struct st_sensors_platform_data *pdata;
struct device *dev = hw->dev;
@@ -1871,26 +1921,29 @@ st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
- struct device_node *np = hw->dev->of_node;
struct st_sensors_platform_data *pdata;
+ struct device *dev = hw->dev;
unsigned int data;
int err = 0;
hub_settings = &hw->settings->shub_settings;
- pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
- if ((np && of_property_read_bool(np, "st,pullups")) ||
+ pdata = (struct st_sensors_platform_data *)dev->platform_data;
+ if ((dev_fwnode(dev) && device_property_read_bool(dev, "st,pullups")) ||
(pdata && pdata->pullups)) {
- err = st_lsm6dsx_set_page(hw, true);
- if (err < 0)
- return err;
+ if (hub_settings->pullup_en.sec_page) {
+ err = st_lsm6dsx_set_page(hw, true);
+ if (err < 0)
+ return err;
+ }
data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->pullup_en.mask);
err = regmap_update_bits(hw->regmap,
hub_settings->pullup_en.addr,
hub_settings->pullup_en.mask, data);
- st_lsm6dsx_set_page(hw, false);
+ if (hub_settings->pullup_en.sec_page)
+ st_lsm6dsx_set_page(hw, false);
if (err < 0)
return err;
@@ -1908,6 +1961,16 @@ static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
hub_settings->aux_sens.mask, data);
st_lsm6dsx_set_page(hw, false);
+
+ if (err < 0)
+ return err;
+ }
+
+ if (hub_settings->emb_func.addr) {
+ data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->emb_func.mask);
+ err = regmap_update_bits(hw->regmap,
+ hub_settings->emb_func.addr,
+ hub_settings->emb_func.mask, data);
}
return err;
@@ -2157,9 +2220,9 @@ static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
{
- struct device_node *np = hw->dev->of_node;
struct st_sensors_platform_data *pdata;
const struct st_lsm6dsx_reg *reg;
+ struct device *dev = hw->dev;
unsigned long irq_type;
bool irq_active_low;
int err;
@@ -2187,8 +2250,8 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
if (err < 0)
return err;
- pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
- if ((np && of_property_read_bool(np, "drive-open-drain")) ||
+ pdata = (struct st_sensors_platform_data *)dev->platform_data;
+ if ((dev_fwnode(dev) && device_property_read_bool(dev, "drive-open-drain")) ||
(pdata && pdata->open_drain)) {
reg = &hw->settings->irq_config.od;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
@@ -2218,7 +2281,6 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
{
struct st_sensors_platform_data *pdata = dev->platform_data;
const struct st_lsm6dsx_shub_settings *hub_settings;
- struct device_node *np = dev->of_node;
struct st_lsm6dsx_hw *hw;
const char *name = NULL;
int i, err;
@@ -2281,7 +2343,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
return err;
}
- if ((np && of_property_read_bool(np, "wakeup-source")) ||
+ if ((dev_fwnode(dev) && device_property_read_bool(dev, "wakeup-source")) ||
(pdata && pdata->wakeup_source))
device_init_wakeup(dev, true);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index cd47ec1fedcb..0fb32131afce 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
-#include <linux/of.h>
#include <linux/regmap.h>
#include "st_lsm6dsx.h"
@@ -122,7 +121,7 @@ static struct i2c_driver st_lsm6dsx_driver = {
.driver = {
.name = "st_lsm6dsx_i2c",
.pm = &st_lsm6dsx_pm_ops,
- .of_match_table = of_match_ptr(st_lsm6dsx_i2c_of_match),
+ .of_match_table = st_lsm6dsx_i2c_of_match,
},
.probe = st_lsm6dsx_i2c_probe,
.id_table = st_lsm6dsx_i2c_id_table,
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index fa5d1001a46c..eea555617d4a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -30,7 +30,6 @@
#include "st_lsm6dsx.h"
-#define ST_LSM6DSX_MAX_SLV_NUM 3
#define ST_LSM6DSX_SLV_ADDR(n, base) ((base) + (n) * 3)
#define ST_LSM6DSX_SLV_SUB_ADDR(n, base) ((base) + 1 + (n) * 3)
#define ST_LSM6DSX_SLV_CONFIG(n, base) ((base) + 2 + (n) * 3)
@@ -102,24 +101,31 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
}
/**
- * st_lsm6dsx_shub_read_reg - read i2c controller register
+ * st_lsm6dsx_shub_read_output - read i2c controller register
*
* Read st_lsm6dsx i2c controller register
*/
-static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr,
- u8 *data, int len)
+static int
+st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data,
+ int len)
{
+ const struct st_lsm6dsx_shub_settings *hub_settings;
int err;
mutex_lock(&hw->page_lock);
- err = st_lsm6dsx_set_page(hw, true);
- if (err < 0)
- goto out;
+ hub_settings = &hw->settings->shub_settings;
+ if (hub_settings->shub_out.sec_page) {
+ err = st_lsm6dsx_set_page(hw, true);
+ if (err < 0)
+ goto out;
+ }
- err = regmap_bulk_read(hw->regmap, addr, data, len);
+ err = regmap_bulk_read(hw->regmap, hub_settings->shub_out.addr,
+ data, len);
- st_lsm6dsx_set_page(hw, false);
+ if (hub_settings->shub_out.sec_page)
+ st_lsm6dsx_set_page(hw, false);
out:
mutex_unlock(&hw->page_lock);
@@ -186,15 +192,18 @@ static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
mutex_lock(&hw->page_lock);
hub_settings = &hw->settings->shub_settings;
- err = st_lsm6dsx_set_page(hw, true);
- if (err < 0)
- goto out;
+ if (hub_settings->master_en.sec_page) {
+ err = st_lsm6dsx_set_page(hw, true);
+ if (err < 0)
+ goto out;
+ }
data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask);
err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr,
hub_settings->master_en.mask, data);
- st_lsm6dsx_set_page(hw, false);
+ if (hub_settings->master_en.sec_page)
+ st_lsm6dsx_set_page(hw, false);
out:
mutex_unlock(&hw->page_lock);
@@ -212,16 +221,21 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
u8 *data, int len)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
+ u8 config[3], slv_addr, slv_config = 0;
struct st_lsm6dsx_hw *hw = sensor->hw;
- u8 config[3], slv_addr;
+ const struct st_lsm6dsx_reg *aux_sens;
int err;
hub_settings = &hw->settings->shub_settings;
slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+ aux_sens = &hw->settings->shub_settings.aux_sens;
+ /* do not overwrite aux_sens */
+ if (slv_addr + 2 == aux_sens->addr)
+ slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
config[0] = (sensor->ext_info.addr << 1) | 1;
config[1] = addr;
- config[2] = len & ST_LS6DSX_READ_OP_MASK;
+ config[2] = (len & ST_LS6DSX_READ_OP_MASK) | slv_config;
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
sizeof(config));
@@ -234,12 +248,14 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
st_lsm6dsx_shub_wait_complete(hw);
- err = st_lsm6dsx_shub_read_reg(hw, hub_settings->shub_out, data,
- len & ST_LS6DSX_READ_OP_MASK);
+ err = st_lsm6dsx_shub_read_output(hw, data,
+ len & ST_LS6DSX_READ_OP_MASK);
st_lsm6dsx_shub_master_enable(sensor, false);
- memset(config, 0, sizeof(config));
+ config[0] = hub_settings->pause;
+ config[1] = 0;
+ config[2] = slv_config;
return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
sizeof(config));
}
@@ -296,7 +312,8 @@ st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr,
st_lsm6dsx_shub_master_enable(sensor, false);
}
- memset(config, 0, sizeof(config));
+ config[0] = hub_settings->pause;
+ config[1] = 0;
return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config));
}
@@ -688,14 +705,19 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
const struct st_lsm6dsx_ext_dev_settings *settings)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
+ u8 config[3], data, slv_addr, slv_config = 0;
+ const struct st_lsm6dsx_reg *aux_sens;
struct st_lsm6dsx_sensor *sensor;
- u8 config[3], data, slv_addr;
bool found = false;
int i, err;
+ sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
hub_settings = &hw->settings->shub_settings;
+ aux_sens = &hw->settings->shub_settings.aux_sens;
slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
- sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+ /* do not overwrite aux_sens */
+ if (slv_addr + 2 == aux_sens->addr)
+ slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask);
for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) {
if (!settings->i2c_addr[i])
@@ -704,7 +726,7 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
/* read wai slave register */
config[0] = (settings->i2c_addr[i] << 1) | 0x1;
config[1] = settings->wai.addr;
- config[2] = 0x1;
+ config[2] = 0x1 | slv_config;
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
sizeof(config));
@@ -717,9 +739,7 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
st_lsm6dsx_shub_wait_complete(hw);
- err = st_lsm6dsx_shub_read_reg(hw,
- hub_settings->shub_out,
- &data, sizeof(data));
+ err = st_lsm6dsx_shub_read_output(hw, &data, sizeof(data));
st_lsm6dsx_shub_master_enable(sensor, false);
@@ -735,7 +755,9 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
}
/* reset SLV0 channel */
- memset(config, 0, sizeof(config));
+ config[0] = hub_settings->pause;
+ config[1] = 0;
+ config[2] = slv_config;
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
sizeof(config));
if (err < 0)
@@ -770,7 +792,7 @@ int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name)
if (err < 0)
return err;
- if (++num_ext_dev >= ST_LSM6DSX_MAX_SLV_NUM)
+ if (++num_ext_dev >= hw->settings->shub_settings.num_ext_dev)
break;
id++;
}
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index 67ff36eac247..eb1086e4a951 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
-#include <linux/of.h>
#include <linux/regmap.h>
#include "st_lsm6dsx.h"
@@ -122,7 +121,7 @@ static struct spi_driver st_lsm6dsx_driver = {
.driver = {
.name = "st_lsm6dsx_spi",
.pm = &st_lsm6dsx_pm_ops,
- .of_match_table = of_match_ptr(st_lsm6dsx_spi_of_match),
+ .of_match_table = st_lsm6dsx_spi_of_match,
},
.probe = st_lsm6dsx_spi_probe,
.id_table = st_lsm6dsx_spi_id_table,
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index c193d64e5217..dbbf0cf4cac9 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -87,7 +87,7 @@ static bool iio_buffer_ready(struct iio_dev *indio_dev, struct iio_buffer *buf,
}
/**
- * iio_buffer_read_first_n_outer() - chrdev read for buffer access
+ * iio_buffer_read_outer() - chrdev read for buffer access
* @filp: File structure pointer for the char device
* @buf: Destination buffer for iio buffer read
* @n: First n bytes to read
@@ -99,8 +99,8 @@ static bool iio_buffer_ready(struct iio_dev *indio_dev, struct iio_buffer *buf,
* Return: negative values corresponding to error codes or ret != 0
* for ending the reading activity
**/
-ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
- size_t n, loff_t *f_ps)
+ssize_t iio_buffer_read_outer(struct file *filp, char __user *buf,
+ size_t n, loff_t *f_ps)
{
struct iio_dev *indio_dev = filp->private_data;
struct iio_buffer *rb = indio_dev->buffer;
@@ -112,7 +112,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
if (!indio_dev->info)
return -ENODEV;
- if (!rb || !rb->access->read_first_n)
+ if (!rb || !rb->access->read)
return -EINVAL;
datum_size = rb->bytes_per_datum;
@@ -147,7 +147,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
continue;
}
- ret = rb->access->read_first_n(rb, n, buf);
+ ret = rb->access->read(rb, n, buf);
if (ret == 0 && (filp->f_flags & O_NONBLOCK))
ret = -EAGAIN;
} while (ret == 0);
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index a46cdf2d8833..65ff0d067018 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -161,6 +161,7 @@ static const char * const iio_chan_info_postfix[] = {
[IIO_CHAN_INFO_DEBOUNCE_TIME] = "debounce_time",
[IIO_CHAN_INFO_CALIBEMISSIVITY] = "calibemissivity",
[IIO_CHAN_INFO_OVERSAMPLING_RATIO] = "oversampling_ratio",
+ [IIO_CHAN_INFO_THERMOCOUPLE_TYPE] = "thermocouple_type",
};
/**
@@ -596,6 +597,8 @@ static ssize_t __iio_format_value(char *buf, size_t len, unsigned int type,
}
return l;
}
+ case IIO_VAL_CHAR:
+ return snprintf(buf, len, "%c", (char)vals[0]);
default:
return 0;
}
@@ -837,7 +840,8 @@ static ssize_t iio_write_channel_info(struct device *dev,
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
int ret, fract_mult = 100000;
- int integer, fract;
+ int integer, fract = 0;
+ bool is_char = false;
/* Assumes decimal - precision based on number of digits */
if (!indio_dev->info->write_raw)
@@ -855,13 +859,24 @@ static ssize_t iio_write_channel_info(struct device *dev,
case IIO_VAL_INT_PLUS_NANO:
fract_mult = 100000000;
break;
+ case IIO_VAL_CHAR:
+ is_char = true;
+ break;
default:
return -EINVAL;
}
- ret = iio_str_to_fixpoint(buf, fract_mult, &integer, &fract);
- if (ret)
- return ret;
+ if (is_char) {
+ char ch;
+
+ if (sscanf(buf, "%c", &ch) != 1)
+ return -EINVAL;
+ integer = ch;
+ } else {
+ ret = iio_str_to_fixpoint(buf, fract_mult, &integer, &fract);
+ if (ret)
+ return ret;
+ }
ret = indio_dev->info->write_raw(indio_dev, this_attr->c,
integer, fract, this_attr->address);
@@ -1617,7 +1632,7 @@ static long iio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
}
static const struct file_operations iio_buffer_fileops = {
- .read = iio_buffer_read_first_n_outer_addr,
+ .read = iio_buffer_read_outer_addr,
.release = iio_chrdev_release,
.open = iio_chrdev_open,
.poll = iio_buffer_poll_addr,
diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c
index c5dfb9a6b5a1..52f86bc777dd 100644
--- a/drivers/iio/light/apds9960.c
+++ b/drivers/iio/light/apds9960.c
@@ -15,7 +15,6 @@
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
@@ -24,7 +23,6 @@
#include <linux/iio/events.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/sysfs.h>
-#include <linux/of_gpio.h>
#define APDS9960_REGMAP_NAME "apds9960_regmap"
#define APDS9960_DRV_NAME "apds9960"
diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index 6733b52c22df..bc196c212881 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -742,7 +742,7 @@ static int lm3533_als_set_resistor(struct lm3533_als *als, u8 val)
if (val < LM3533_ALS_RESISTOR_MIN || val > LM3533_ALS_RESISTOR_MAX) {
dev_err(&als->pdev->dev, "invalid resistor value\n");
return -EINVAL;
- };
+ }
ret = lm3533_write(als->lm3533, LM3533_REG_ALS_RESISTOR_SELECT, val);
if (ret) {
diff --git a/drivers/iio/light/si1145.c b/drivers/iio/light/si1145.c
index 982bba0c54e7..0476c2bc8138 100644
--- a/drivers/iio/light/si1145.c
+++ b/drivers/iio/light/si1145.c
@@ -17,7 +17,6 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c
index dacbac6a6662..4889bbeb0c73 100644
--- a/drivers/iio/light/st_uvis25_i2c.c
+++ b/drivers/iio/light/st_uvis25_i2c.c
@@ -9,7 +9,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/regmap.h>
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index 893bec5a0312..55cffaa82456 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -16,8 +16,7 @@
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/acpi.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
@@ -360,7 +359,7 @@ struct ak8975_data {
struct mutex lock;
u8 asa[3];
long raw_to_gauss[3];
- int eoc_gpio;
+ struct gpio_desc *eoc_gpiod;
int eoc_irq;
wait_queue_head_t data_ready_queue;
unsigned long flags;
@@ -498,15 +497,13 @@ static int ak8975_setup_irq(struct ak8975_data *data)
if (client->irq)
irq = client->irq;
else
- irq = gpio_to_irq(data->eoc_gpio);
+ irq = gpiod_to_irq(data->eoc_gpiod);
rc = devm_request_irq(&client->dev, irq, ak8975_irq_handler,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
dev_name(&client->dev), data);
if (rc < 0) {
- dev_err(&client->dev,
- "irq %d request failed, (gpio %d): %d\n",
- irq, data->eoc_gpio, rc);
+ dev_err(&client->dev, "irq %d request failed: %d\n", irq, rc);
return rc;
}
@@ -549,7 +546,7 @@ static int ak8975_setup(struct i2c_client *client)
return ret;
}
- if (data->eoc_gpio > 0 || client->irq > 0) {
+ if (data->eoc_gpiod || client->irq > 0) {
ret = ak8975_setup_irq(data);
if (ret < 0) {
dev_err(&client->dev,
@@ -574,7 +571,7 @@ static int wait_conversion_complete_gpio(struct ak8975_data *data)
/* Wait for the conversion to complete. */
while (timeout_ms) {
msleep(AK8975_CONVERSION_DONE_POLL_TIME);
- if (gpio_get_value(data->eoc_gpio))
+ if (gpiod_get_value(data->eoc_gpiod))
break;
timeout_ms -= AK8975_CONVERSION_DONE_POLL_TIME;
}
@@ -646,7 +643,7 @@ static int ak8975_start_read_axis(struct ak8975_data *data,
/* Wait for the conversion to complete. */
if (data->eoc_irq)
ret = wait_conversion_complete_interrupt(data);
- else if (gpio_is_valid(data->eoc_gpio))
+ else if (data->eoc_gpiod)
ret = wait_conversion_complete_gpio(data);
else
ret = wait_conversion_complete_polled(data);
@@ -856,36 +853,23 @@ static int ak8975_probe(struct i2c_client *client,
{
struct ak8975_data *data;
struct iio_dev *indio_dev;
- int eoc_gpio;
+ struct gpio_desc *eoc_gpiod;
int err;
const char *name = NULL;
enum asahi_compass_chipset chipset = AK_MAX_TYPE;
const struct ak8975_platform_data *pdata =
dev_get_platdata(&client->dev);
- /* Grab and set up the supplied GPIO. */
- if (pdata)
- eoc_gpio = pdata->eoc_gpio;
- else if (client->dev.of_node)
- eoc_gpio = of_get_gpio(client->dev.of_node, 0);
- else
- eoc_gpio = -1;
-
- if (eoc_gpio == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- /* We may not have a GPIO based IRQ to scan, that is fine, we will
- poll if so */
- if (gpio_is_valid(eoc_gpio)) {
- err = devm_gpio_request_one(&client->dev, eoc_gpio,
- GPIOF_IN, "ak_8975");
- if (err < 0) {
- dev_err(&client->dev,
- "failed to request GPIO %d, error %d\n",
- eoc_gpio, err);
- return err;
- }
- }
+ /*
+ * Grab and set up the supplied GPIO.
+ * We may not have a GPIO based IRQ to scan, that is fine, we will
+ * poll if so.
+ */
+ eoc_gpiod = devm_gpiod_get_optional(&client->dev, NULL, GPIOD_IN);
+ if (IS_ERR(eoc_gpiod))
+ return PTR_ERR(eoc_gpiod);
+ if (eoc_gpiod)
+ gpiod_set_consumer_name(eoc_gpiod, "ak_8975");
/* Register with IIO */
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
@@ -896,7 +880,7 @@ static int ak8975_probe(struct i2c_client *client,
i2c_set_clientdata(client, indio_dev);
data->client = client;
- data->eoc_gpio = eoc_gpio;
+ data->eoc_gpiod = eoc_gpiod;
data->eoc_irq = 0;
if (!pdata) {
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index ba420e484787..9c2d9bf8f100 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -53,6 +53,18 @@ config IIO_CROS_EC_BARO
To compile this driver as a module, choose M here: the module
will be called cros_ec_baro.
+config DLHL60D
+ tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for the All Sensors DLH series
+ pressure sensors driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called dlhl60d.
+
config DPS310
tristate "Infineon DPS310 pressure and temperature sensor"
depends on I2C
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index d8f5ace1f25d..5a79192d8cb5 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_BMP280) += bmp280.o
bmp280-objs := bmp280-core.o bmp280-regmap.o
obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o
obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o
+obj-$(CONFIG_DLHL60D) += dlhl60d.o
obj-$(CONFIG_DPS310) += dps310.o
obj-$(CONFIG_IIO_CROS_EC_BARO) += cros_ec_baro.o
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index 3109c8e2cc11..8b03ea15c0d0 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -1,8 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
#include <linux/module.h>
#include <linux/i2c.h>
-#include <linux/acpi.h>
-#include <linux/of.h>
#include <linux/regmap.h>
#include "bmp280.h"
@@ -38,16 +36,6 @@ static int bmp280_i2c_probe(struct i2c_client *client,
client->irq);
}
-static const struct acpi_device_id bmp280_acpi_i2c_match[] = {
- {"BMP0280", BMP280_CHIP_ID },
- {"BMP0180", BMP180_CHIP_ID },
- {"BMP0085", BMP180_CHIP_ID },
- {"BME0280", BME280_CHIP_ID },
- { },
-};
-MODULE_DEVICE_TABLE(acpi, bmp280_acpi_i2c_match);
-
-#ifdef CONFIG_OF
static const struct of_device_id bmp280_of_i2c_match[] = {
{ .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
{ .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
@@ -56,9 +44,6 @@ static const struct of_device_id bmp280_of_i2c_match[] = {
{ },
};
MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match);
-#else
-#define bmp280_of_i2c_match NULL
-#endif
static const struct i2c_device_id bmp280_i2c_id[] = {
{"bmp280", BMP280_CHIP_ID },
@@ -72,8 +57,7 @@ MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id);
static struct i2c_driver bmp280_i2c_driver = {
.driver = {
.name = "bmp280",
- .acpi_match_table = ACPI_PTR(bmp280_acpi_i2c_match),
- .of_match_table = of_match_ptr(bmp280_of_i2c_match),
+ .of_match_table = bmp280_of_i2c_match,
.pm = &bmp280_dev_pm_ops,
},
.probe = bmp280_i2c_probe,
diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
new file mode 100644
index 000000000000..b8c99e7bd6cf
--- /dev/null
+++ b/drivers/iio/pressure/dlhl60d.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * All Sensors DLH series low voltage digital pressure sensors
+ *
+ * Copyright (c) 2019 AVL DiTEST GmbH
+ * Tomislav Denis <tomislav.denis@avl.com>
+ *
+ * Datasheet: http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <asm/unaligned.h>
+
+/* Commands */
+#define DLH_START_SINGLE 0xAA
+
+/* Status bits */
+#define DLH_STATUS_OK 0x40
+
+/* DLH data format */
+#define DLH_NUM_READ_BYTES 7
+#define DLH_NUM_DATA_BYTES 3
+#define DLH_NUM_PR_BITS 24
+#define DLH_NUM_TEMP_BITS 24
+
+/* DLH timings */
+#define DLH_SINGLE_DUT_MS 5
+
+enum dhl_ids {
+ dlhl60d,
+ dlhl60g,
+};
+
+struct dlh_info {
+ u8 osdig; /* digital offset factor */
+ unsigned int fss; /* full scale span (inch H2O) */
+};
+
+struct dlh_state {
+ struct i2c_client *client;
+ struct dlh_info info;
+ bool use_interrupt;
+ struct completion completion;
+ u8 rx_buf[DLH_NUM_READ_BYTES] ____cacheline_aligned;
+};
+
+static struct dlh_info dlh_info_tbl[] = {
+ [dlhl60d] = {
+ .osdig = 2,
+ .fss = 120,
+ },
+ [dlhl60g] = {
+ .osdig = 10,
+ .fss = 60,
+ },
+};
+
+
+static int dlh_cmd_start_single(struct dlh_state *st)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte(st->client, DLH_START_SINGLE);
+ if (ret)
+ dev_err(&st->client->dev,
+ "%s: I2C write byte failed\n", __func__);
+
+ return ret;
+}
+
+static int dlh_cmd_read_data(struct dlh_state *st)
+{
+ int ret;
+
+ ret = i2c_master_recv(st->client, st->rx_buf, DLH_NUM_READ_BYTES);
+ if (ret < 0) {
+ dev_err(&st->client->dev,
+ "%s: I2C read block failed\n", __func__);
+ return ret;
+ }
+
+ if (st->rx_buf[0] != DLH_STATUS_OK) {
+ dev_err(&st->client->dev,
+ "%s: invalid status 0x%02x\n", __func__, st->rx_buf[0]);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int dlh_start_capture_and_read(struct dlh_state *st)
+{
+ int ret;
+
+ if (st->use_interrupt)
+ reinit_completion(&st->completion);
+
+ ret = dlh_cmd_start_single(st);
+ if (ret)
+ return ret;
+
+ if (st->use_interrupt) {
+ ret = wait_for_completion_timeout(&st->completion,
+ msecs_to_jiffies(DLH_SINGLE_DUT_MS));
+ if (!ret) {
+ dev_err(&st->client->dev,
+ "%s: conversion timed out\n", __func__);
+ return -ETIMEDOUT;
+ }
+ } else {
+ mdelay(DLH_SINGLE_DUT_MS);
+ }
+
+ return dlh_cmd_read_data(st);
+}
+
+static int dlh_read_direct(struct dlh_state *st,
+ unsigned int *pressure, unsigned int *temperature)
+{
+ int ret;
+
+ ret = dlh_start_capture_and_read(st);
+ if (ret)
+ return ret;
+
+ *pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8;
+ *temperature = get_unaligned_be32(&st->rx_buf[3]) &
+ GENMASK(DLH_NUM_TEMP_BITS - 1, 0);
+
+ return 0;
+}
+
+static int dlh_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *channel, int *value,
+ int *value2, long mask)
+{
+ struct dlh_state *st = iio_priv(indio_dev);
+ unsigned int pressure, temperature;
+ int ret;
+ s64 tmp;
+ s32 rem;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = dlh_read_direct(st, &pressure, &temperature);
+ iio_device_release_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ switch (channel->type) {
+ case IIO_PRESSURE:
+ *value = pressure;
+ return IIO_VAL_INT;
+
+ case IIO_TEMP:
+ *value = temperature;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_SCALE:
+ switch (channel->type) {
+ case IIO_PRESSURE:
+ tmp = div_s64(125LL * st->info.fss * 24909 * 100,
+ 1 << DLH_NUM_PR_BITS);
+ tmp = div_s64_rem(tmp, 1000000000LL, &rem);
+ *value = tmp;
+ *value2 = rem;
+ return IIO_VAL_INT_PLUS_NANO;
+
+ case IIO_TEMP:
+ *value = 125 * 1000;
+ *value2 = DLH_NUM_TEMP_BITS;
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ switch (channel->type) {
+ case IIO_PRESSURE:
+ *value = -125 * st->info.fss * 24909;
+ *value2 = 100 * st->info.osdig * 100000;
+ return IIO_VAL_FRACTIONAL;
+
+ case IIO_TEMP:
+ *value = -40 * 1000;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info dlh_info = {
+ .read_raw = dlh_read_raw,
+};
+
+static const struct iio_chan_spec dlh_channels[] = {
+ {
+ .type = IIO_PRESSURE,
+ .indexed = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type =
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = DLH_NUM_PR_BITS,
+ .storagebits = 32,
+ .shift = 8,
+ .endianness = IIO_BE,
+ },
+ }, {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type =
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_OFFSET),
+ .scan_index = 1,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = DLH_NUM_TEMP_BITS,
+ .storagebits = 32,
+ .shift = 8,
+ .endianness = IIO_BE,
+ },
+ }
+};
+
+static irqreturn_t dlh_trigger_handler(int irq, void *private)
+{
+ struct iio_poll_func *pf = private;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct dlh_state *st = iio_priv(indio_dev);
+ int ret;
+ unsigned int chn, i = 0;
+ __be32 tmp_buf[2];
+
+ ret = dlh_start_capture_and_read(st);
+ if (ret)
+ goto out;
+
+ for_each_set_bit(chn, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ memcpy(tmp_buf + i,
+ &st->rx_buf[1] + chn * DLH_NUM_DATA_BYTES,
+ DLH_NUM_DATA_BYTES);
+ i++;
+ }
+
+ iio_push_to_buffers(indio_dev, tmp_buf);
+
+out:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dlh_interrupt(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct dlh_state *st = iio_priv(indio_dev);
+
+ complete(&st->completion);
+
+ return IRQ_HANDLED;
+};
+
+static int dlh_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct dlh_state *st;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE)) {
+ dev_err(&client->dev,
+ "adapter doesn't support required i2c functionality\n");
+ return -EOPNOTSUPP;
+ }
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+ if (!indio_dev) {
+ dev_err(&client->dev, "failed to allocate iio device\n");
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(client, indio_dev);
+
+ st = iio_priv(indio_dev);
+ st->info = dlh_info_tbl[id->driver_data];
+ st->client = client;
+ st->use_interrupt = false;
+
+ indio_dev->name = id->name;
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->dev.of_node = client->dev.of_node;
+ indio_dev->info = &dlh_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = dlh_channels;
+ indio_dev->num_channels = ARRAY_SIZE(dlh_channels);
+
+ if (client->irq > 0) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ dlh_interrupt, NULL,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ id->name, indio_dev);
+ if (ret) {
+ dev_err(&client->dev, "failed to allocate threaded irq");
+ return ret;
+ }
+
+ st->use_interrupt = true;
+ init_completion(&st->completion);
+ }
+
+ ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
+ NULL, &dlh_trigger_handler, NULL);
+ if (ret) {
+ dev_err(&client->dev, "failed to setup iio buffer\n");
+ return ret;
+ }
+
+ ret = devm_iio_device_register(&client->dev, indio_dev);
+ if (ret)
+ dev_err(&client->dev, "failed to register iio device\n");
+
+ return ret;
+}
+
+static const struct of_device_id dlh_of_match[] = {
+ { .compatible = "asc,dlhl60d" },
+ { .compatible = "asc,dlhl60g" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, dlh_of_match);
+
+static const struct i2c_device_id dlh_id[] = {
+ { "dlhl60d", dlhl60d },
+ { "dlhl60g", dlhl60g },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, dlh_id);
+
+static struct i2c_driver dlh_driver = {
+ .driver = {
+ .name = "dlhl60d",
+ .of_match_table = dlh_of_match,
+ },
+ .probe = dlh_probe,
+ .id_table = dlh_id,
+};
+module_i2c_driver(dlh_driver);
+
+MODULE_AUTHOR("Tomislav Denis <tomislav.denis@avl.com>");
+MODULE_DESCRIPTION("Driver for All Sensors DLH series pressure sensors");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index c2e47a6c3118..5c746ff6087e 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -37,7 +37,7 @@ enum st_press_type {
* struct st_sensors_platform_data - default press platform data
* @drdy_int_pin: default press DRDY is available on INT1 pin.
*/
-static const struct st_sensors_platform_data default_press_pdata = {
+static __maybe_unused const struct st_sensors_platform_data default_press_pdata = {
.drdy_int_pin = 1,
};
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 71d2ed6b4948..6203bc9d5c2d 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -61,8 +61,6 @@ static const struct acpi_device_id st_press_acpi_match[] = {
{ },
};
MODULE_DEVICE_TABLE(acpi, st_press_acpi_match);
-#else
-#define st_press_acpi_match NULL
#endif
static const struct i2c_device_id st_press_id_table[] = {
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index d53601447da4..37606d400805 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -58,6 +58,21 @@ config MB1232
To compile this driver as a module, choose M here: the
module will be called mb1232.
+config PING
+ tristate "Parallax GPIO bitbanged ranger sensors"
+ depends on GPIOLIB
+ help
+ Say Y here to build a driver for GPIO bitbanged ranger sensors
+ with just one GPIO for the trigger and echo. This driver can be
+ used to measure the distance of objects.
+
+ Actually supported are:
+ - Parallax PING))) (ultrasonic)
+ - Parallax LaserPING (time-of-flight)
+
+ To compile this driver as a module, choose M here: the
+ module will be called ping.
+
config RFD77402
tristate "RFD77402 ToF sensor"
depends on I2C
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
index 0bb5f9de13d6..c591b019304e 100644
--- a/drivers/iio/proximity/Makefile
+++ b/drivers/iio/proximity/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_AS3935) += as3935.o
obj-$(CONFIG_ISL29501) += isl29501.o
obj-$(CONFIG_LIDAR_LITE_V2) += pulsedlight-lidar-lite-v2.o
obj-$(CONFIG_MB1232) += mb1232.o
+obj-$(CONFIG_PING) += ping.o
obj-$(CONFIG_RFD77402) += rfd77402.o
obj-$(CONFIG_SRF04) += srf04.o
obj-$(CONFIG_SRF08) += srf08.o
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index b591c63bd6c4..bac9a433dd19 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -14,7 +14,6 @@
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -22,8 +21,6 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
-#include <linux/of_gpio.h>
-
#define AS3935_AFE_GAIN 0x00
#define AS3935_AFE_MASK 0x3F
diff --git a/drivers/iio/proximity/ping.c b/drivers/iio/proximity/ping.c
new file mode 100644
index 000000000000..34aff108dff5
--- /dev/null
+++ b/drivers/iio/proximity/ping.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PING: ultrasonic sensor for distance measuring by using only one GPIOs
+ *
+ * Copyright (c) 2019 Andreas Klinger <ak@it-klinger.de>
+ *
+ * For details about the devices see:
+ * http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf
+ * http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf
+ *
+ * the measurement cycle as timing diagram looks like:
+ *
+ * GPIO ___ ________________________
+ * ping: __/ \____________/ \________________
+ * ^ ^ ^ ^
+ * |<->| interrupt interrupt
+ * udelay(5) (ts_rising) (ts_falling)
+ * |<---------------------->|
+ * . pulse time measured .
+ * . --> one round trip of ultra sonic waves
+ * ultra . .
+ * sonic _ _ _. .
+ * burst: _________/ \_/ \_/ \_________________________________________
+ * .
+ * ultra .
+ * sonic _ _ _.
+ * echo: __________________________________/ \_/ \_/ \________________
+ */
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+struct ping_cfg {
+ unsigned long trigger_pulse_us; /* length of trigger pulse */
+ int laserping_error; /* support error code in */
+ /* pulse width of laser */
+ /* ping sensors */
+ s64 timeout_ns; /* timeout in ns */
+};
+
+struct ping_data {
+ struct device *dev;
+ struct gpio_desc *gpiod_ping;
+ struct mutex lock;
+ int irqnr;
+ ktime_t ts_rising;
+ ktime_t ts_falling;
+ struct completion rising;
+ struct completion falling;
+ const struct ping_cfg *cfg;
+};
+
+static const struct ping_cfg pa_ping_cfg = {
+ .trigger_pulse_us = 5,
+ .laserping_error = 0,
+ .timeout_ns = 18500000, /* 3 meters */
+};
+
+static const struct ping_cfg pa_laser_ping_cfg = {
+ .trigger_pulse_us = 5,
+ .laserping_error = 1,
+ .timeout_ns = 15500000, /* 2 meters plus error codes */
+};
+
+static irqreturn_t ping_handle_irq(int irq, void *dev_id)
+{
+ struct iio_dev *indio_dev = dev_id;
+ struct ping_data *data = iio_priv(indio_dev);
+ ktime_t now = ktime_get();
+
+ if (gpiod_get_value(data->gpiod_ping)) {
+ data->ts_rising = now;
+ complete(&data->rising);
+ } else {
+ data->ts_falling = now;
+ complete(&data->falling);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ping_read(struct ping_data *data)
+{
+ int ret;
+ ktime_t ktime_dt;
+ s64 dt_ns;
+ u32 time_ns, distance_mm;
+ struct platform_device *pdev = to_platform_device(data->dev);
+ struct iio_dev *indio_dev = iio_priv_to_dev(data);
+
+ /*
+ * just one read-echo-cycle can take place at a time
+ * ==> lock against concurrent reading calls
+ */
+ mutex_lock(&data->lock);
+
+ reinit_completion(&data->rising);
+ reinit_completion(&data->falling);
+
+ gpiod_set_value(data->gpiod_ping, 1);
+ udelay(data->cfg->trigger_pulse_us);
+ gpiod_set_value(data->gpiod_ping, 0);
+
+ ret = gpiod_direction_input(data->gpiod_ping);
+ if (ret < 0) {
+ mutex_unlock(&data->lock);
+ return ret;
+ }
+
+ data->irqnr = gpiod_to_irq(data->gpiod_ping);
+ if (data->irqnr < 0) {
+ dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
+ mutex_unlock(&data->lock);
+ return data->irqnr;
+ }
+
+ ret = request_irq(data->irqnr, ping_handle_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ pdev->name, indio_dev);
+ if (ret < 0) {
+ dev_err(data->dev, "request_irq: %d\n", ret);
+ mutex_unlock(&data->lock);
+ return ret;
+ }
+
+ /* it should not take more than 20 ms until echo is rising */
+ ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
+ if (ret < 0)
+ goto err_reset_direction;
+ else if (ret == 0) {
+ ret = -ETIMEDOUT;
+ goto err_reset_direction;
+ }
+
+ /* it cannot take more than 50 ms until echo is falling */
+ ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
+ if (ret < 0)
+ goto err_reset_direction;
+ else if (ret == 0) {
+ ret = -ETIMEDOUT;
+ goto err_reset_direction;
+ }
+
+ ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
+
+ free_irq(data->irqnr, indio_dev);
+
+ ret = gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW);
+ if (ret < 0) {
+ mutex_unlock(&data->lock);
+ return ret;
+ }
+
+ mutex_unlock(&data->lock);
+
+ dt_ns = ktime_to_ns(ktime_dt);
+ if (dt_ns > data->cfg->timeout_ns) {
+ dev_dbg(data->dev, "distance out of range: dt=%lldns\n",
+ dt_ns);
+ return -EIO;
+ }
+
+ time_ns = dt_ns;
+
+ /*
+ * read error code of laser ping sensor and give users chance to
+ * figure out error by using dynamic debuggging
+ */
+ if (data->cfg->laserping_error) {
+ if ((time_ns > 12500000) && (time_ns <= 13500000)) {
+ dev_dbg(data->dev, "target too close or to far\n");
+ return -EIO;
+ }
+ if ((time_ns > 13500000) && (time_ns <= 14500000)) {
+ dev_dbg(data->dev, "internal sensor error\n");
+ return -EIO;
+ }
+ if ((time_ns > 14500000) && (time_ns <= 15500000)) {
+ dev_dbg(data->dev, "internal sensor timeout\n");
+ return -EIO;
+ }
+ }
+
+ /*
+ * the speed as function of the temperature is approximately:
+ *
+ * speed = 331,5 + 0,6 * Temp
+ * with Temp in °C
+ * and speed in m/s
+ *
+ * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
+ * temperature
+ *
+ * therefore:
+ * time 343,5 time * 232
+ * distance = ------ * ------- = ------------
+ * 10^6 2 1350800
+ * with time in ns
+ * and distance in mm (one way)
+ *
+ * because we limit to 3 meters the multiplication with 232 just
+ * fits into 32 bit
+ */
+ distance_mm = time_ns * 232 / 1350800;
+
+ return distance_mm;
+
+err_reset_direction:
+ free_irq(data->irqnr, indio_dev);
+ mutex_unlock(&data->lock);
+
+ if (gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW))
+ dev_dbg(data->dev, "error in gpiod_direction_output\n");
+ return ret;
+}
+
+static int ping_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *channel, int *val,
+ int *val2, long info)
+{
+ struct ping_data *data = iio_priv(indio_dev);
+ int ret;
+
+ if (channel->type != IIO_DISTANCE)
+ return -EINVAL;
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ ret = ping_read(data);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ /*
+ * maximum resolution in datasheet is 1 mm
+ * 1 LSB is 1 mm
+ */
+ *val = 0;
+ *val2 = 1000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info ping_iio_info = {
+ .read_raw = ping_read_raw,
+};
+
+static const struct iio_chan_spec ping_chan_spec[] = {
+ {
+ .type = IIO_DISTANCE,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ },
+};
+
+static const struct of_device_id of_ping_match[] = {
+ { .compatible = "parallax,ping", .data = &pa_ping_cfg},
+ { .compatible = "parallax,laserping", .data = &pa_ping_cfg},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_ping_match);
+
+static int ping_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ping_data *data;
+ struct iio_dev *indio_dev;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(struct ping_data));
+ if (!indio_dev) {
+ dev_err(dev, "failed to allocate IIO device\n");
+ return -ENOMEM;
+ }
+
+ data = iio_priv(indio_dev);
+ data->dev = dev;
+ data->cfg = of_device_get_match_data(dev);
+
+ mutex_init(&data->lock);
+ init_completion(&data->rising);
+ init_completion(&data->falling);
+
+ data->gpiod_ping = devm_gpiod_get(dev, "ping", GPIOD_OUT_LOW);
+ if (IS_ERR(data->gpiod_ping)) {
+ dev_err(dev, "failed to get ping-gpios: err=%ld\n",
+ PTR_ERR(data->gpiod_ping));
+ return PTR_ERR(data->gpiod_ping);
+ }
+
+ if (gpiod_cansleep(data->gpiod_ping)) {
+ dev_err(data->dev, "cansleep-GPIOs not supported\n");
+ return -ENODEV;
+ }
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ indio_dev->name = "ping";
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->info = &ping_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ping_chan_spec;
+ indio_dev->num_channels = ARRAY_SIZE(ping_chan_spec);
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static struct platform_driver ping_driver = {
+ .probe = ping_probe,
+ .driver = {
+ .name = "ping-gpio",
+ .of_match_table = of_ping_match,
+ },
+};
+
+module_platform_driver(ping_driver);
+
+MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
+MODULE_DESCRIPTION("PING sensors for distance measuring using one GPIOs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ping");
diff --git a/drivers/iio/resolver/ad2s1200.c b/drivers/iio/resolver/ad2s1200.c
index 17b89623418c..a391f46ee06b 100644
--- a/drivers/iio/resolver/ad2s1200.c
+++ b/drivers/iio/resolver/ad2s1200.c
@@ -10,7 +10,6 @@
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/mutex.h>
diff --git a/drivers/iio/temperature/max31856.c b/drivers/iio/temperature/max31856.c
index 73ed550e3fc9..b4cb21ab2e85 100644
--- a/drivers/iio/temperature/max31856.c
+++ b/drivers/iio/temperature/max31856.c
@@ -6,12 +6,14 @@
* Copyright (C) 2018-2019 Rockwell Collins
*/
+#include <linux/ctype.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
+#include <linux/util_macros.h>
#include <dt-bindings/iio/temperature/thermocouple.h>
/*
* The MSB of the register value determines whether the following byte will
@@ -23,6 +25,9 @@
#define MAX31856_CR0_1SHOT BIT(6)
#define MAX31856_CR0_OCFAULT BIT(4)
#define MAX31856_CR0_OCFAULT_MASK GENMASK(5, 4)
+#define MAX31856_CR0_FILTER_50HZ BIT(0)
+#define MAX31856_AVERAGING_MASK GENMASK(6, 4)
+#define MAX31856_AVERAGING_SHIFT 4
#define MAX31856_TC_TYPE_MASK GENMASK(3, 0)
#define MAX31856_FAULT_OVUV BIT(1)
#define MAX31856_FAULT_OPEN BIT(0)
@@ -49,7 +54,10 @@ static const struct iio_chan_spec max31856_channels[] = {
{ /* Thermocouple Temperature */
.type = IIO_TEMP,
.info_mask_separate =
- BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE),
+ .info_mask_shared_by_type =
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)
},
{ /* Cold Junction Temperature */
.type = IIO_TEMP,
@@ -57,12 +65,20 @@ static const struct iio_chan_spec max31856_channels[] = {
.modified = 1,
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_shared_by_type =
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)
},
};
struct max31856_data {
struct spi_device *spi;
u32 thermocouple_type;
+ bool filter_50hz;
+ int averaging;
+};
+
+static const char max31856_tc_types[] = {
+ 'B', 'E', 'J', 'K', 'N', 'R', 'S', 'T'
};
static int max31856_read(struct max31856_data *data, u8 reg,
@@ -107,6 +123,10 @@ static int max31856_init(struct max31856_data *data)
reg_cr1_val &= ~MAX31856_TC_TYPE_MASK;
reg_cr1_val |= data->thermocouple_type;
+
+ reg_cr1_val &= ~MAX31856_AVERAGING_MASK;
+ reg_cr1_val |= data->averaging << MAX31856_AVERAGING_SHIFT;
+
ret = max31856_write(data, MAX31856_CR1_REG, reg_cr1_val);
if (ret)
return ret;
@@ -123,6 +143,11 @@ static int max31856_init(struct max31856_data *data)
reg_cr0_val &= ~MAX31856_CR0_1SHOT;
reg_cr0_val |= MAX31856_CR0_AUTOCONVERT;
+ if (data->filter_50hz)
+ reg_cr0_val |= MAX31856_CR0_FILTER_50HZ;
+ else
+ reg_cr0_val &= ~MAX31856_CR0_FILTER_50HZ;
+
return max31856_write(data, MAX31856_CR0_REG, reg_cr0_val);
}
@@ -210,6 +235,12 @@ static int max31856_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT_PLUS_MICRO;
}
break;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *val = 1 << data->averaging;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+ *val = max31856_tc_types[data->thermocouple_type];
+ return IIO_VAL_CHAR;
default:
ret = -EINVAL;
break;
@@ -218,6 +249,62 @@ static int max31856_read_raw(struct iio_dev *indio_dev,
return ret;
}
+static int max31856_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+ return IIO_VAL_CHAR;
+ default:
+ return IIO_VAL_INT;
+ }
+}
+
+static int max31856_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct max31856_data *data = iio_priv(indio_dev);
+ int msb;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ if (val > 16 || val < 1)
+ return -EINVAL;
+ msb = fls(val) - 1;
+ /* Round up to next 2pow if needed */
+ if (BIT(msb) < val)
+ msb++;
+
+ data->averaging = msb;
+ max31856_init(data);
+ break;
+ case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+ {
+ int tc_type = -1;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(max31856_tc_types); i++) {
+ if (max31856_tc_types[i] == toupper(val)) {
+ tc_type = i;
+ break;
+ }
+ }
+ if (tc_type < 0)
+ return -EINVAL;
+
+ data->thermocouple_type = tc_type;
+ max31856_init(data);
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static ssize_t show_fault(struct device *dev, u8 faultbit, char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
@@ -249,12 +336,54 @@ static ssize_t show_fault_oc(struct device *dev,
return show_fault(dev, MAX31856_FAULT_OPEN, buf);
}
+static ssize_t show_filter(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct max31856_data *data = iio_priv(indio_dev);
+
+ return sprintf(buf, "%d\n", data->filter_50hz ? 50 : 60);
+}
+
+static ssize_t set_filter(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct max31856_data *data = iio_priv(indio_dev);
+ unsigned int freq;
+ int ret;
+
+ ret = kstrtouint(buf, 10, &freq);
+ if (ret)
+ return ret;
+
+ switch (freq) {
+ case 50:
+ data->filter_50hz = true;
+ break;
+ case 60:
+ data->filter_50hz = false;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ max31856_init(data);
+ return len;
+}
+
static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0);
static IIO_DEVICE_ATTR(fault_oc, 0444, show_fault_oc, NULL, 0);
+static IIO_DEVICE_ATTR(in_temp_filter_notch_center_frequency, 0644,
+ show_filter, set_filter, 0);
static struct attribute *max31856_attributes[] = {
&iio_dev_attr_fault_ovuv.dev_attr.attr,
&iio_dev_attr_fault_oc.dev_attr.attr,
+ &iio_dev_attr_in_temp_filter_notch_center_frequency.dev_attr.attr,
NULL,
};
@@ -264,6 +393,8 @@ static const struct attribute_group max31856_group = {
static const struct iio_info max31856_info = {
.read_raw = max31856_read_raw,
+ .write_raw = max31856_write_raw,
+ .write_raw_get_fmt = max31856_write_raw_get_fmt,
.attrs = &max31856_group,
};
@@ -280,6 +411,7 @@ static int max31856_probe(struct spi_device *spi)
data = iio_priv(indio_dev);
data->spi = spi;
+ data->filter_50hz = false;
spi_set_drvdata(spi, indio_dev);
diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c
index d1360605209c..8d21116c7a22 100644
--- a/drivers/iio/temperature/maxim_thermocouple.c
+++ b/drivers/iio/temperature/maxim_thermocouple.c
@@ -14,6 +14,7 @@
#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
@@ -24,13 +25,25 @@
enum {
MAX6675,
MAX31855,
+ MAX31855K,
+ MAX31855J,
+ MAX31855N,
+ MAX31855S,
+ MAX31855T,
+ MAX31855E,
+ MAX31855R,
+};
+
+static const char maxim_tc_types[] = {
+ 'K', '?', 'K', 'J', 'N', 'S', 'T', 'E', 'R'
};
static const struct iio_chan_spec max6675_channels[] = {
{ /* thermocouple temperature */
.type = IIO_TEMP,
.info_mask_separate =
- BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE),
.scan_index = 0,
.scan_type = {
.sign = 's',
@@ -48,7 +61,8 @@ static const struct iio_chan_spec max31855_channels[] = {
.type = IIO_TEMP,
.address = 2,
.info_mask_separate =
- BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE),
.scan_index = 0,
.scan_type = {
.sign = 's',
@@ -110,6 +124,7 @@ struct maxim_thermocouple_data {
const struct maxim_thermocouple_chip *chip;
u8 buffer[16] ____cacheline_aligned;
+ char tc_type;
};
static int maxim_thermocouple_read(struct maxim_thermocouple_data *data,
@@ -196,6 +211,10 @@ static int maxim_thermocouple_read_raw(struct iio_dev *indio_dev,
ret = IIO_VAL_INT;
}
break;
+ case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+ *val = data->tc_type;
+ ret = IIO_VAL_CHAR;
+ break;
}
return ret;
@@ -210,8 +229,9 @@ static int maxim_thermocouple_probe(struct spi_device *spi)
const struct spi_device_id *id = spi_get_device_id(spi);
struct iio_dev *indio_dev;
struct maxim_thermocouple_data *data;
+ const int chip_type = (id->driver_data == MAX6675) ? MAX6675 : MAX31855;
const struct maxim_thermocouple_chip *chip =
- &maxim_thermocouple_chips[id->driver_data];
+ &maxim_thermocouple_chips[chip_type];
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data));
@@ -229,6 +249,7 @@ static int maxim_thermocouple_probe(struct spi_device *spi)
data = iio_priv(indio_dev);
data->spi = spi;
data->chip = chip;
+ data->tc_type = maxim_tc_types[id->driver_data];
ret = devm_iio_triggered_buffer_setup(&spi->dev,
indio_dev, NULL,
@@ -236,12 +257,22 @@ static int maxim_thermocouple_probe(struct spi_device *spi)
if (ret)
return ret;
+ if (id->driver_data == MAX31855)
+ dev_warn(&spi->dev, "generic max31855 ID is deprecated\nplease use more specific part type");
+
return devm_iio_device_register(&spi->dev, indio_dev);
}
static const struct spi_device_id maxim_thermocouple_id[] = {
{"max6675", MAX6675},
{"max31855", MAX31855},
+ {"max31855k", MAX31855K},
+ {"max31855j", MAX31855J},
+ {"max31855n", MAX31855N},
+ {"max31855s", MAX31855S},
+ {"max31855t", MAX31855T},
+ {"max31855e", MAX31855E},
+ {"max31855r", MAX31855R},
{},
};
MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id);
@@ -249,6 +280,13 @@ MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id);
static const struct of_device_id maxim_thermocouple_of_match[] = {
{ .compatible = "maxim,max6675" },
{ .compatible = "maxim,max31855" },
+ { .compatible = "maxim,max31855k" },
+ { .compatible = "maxim,max31855j" },
+ { .compatible = "maxim,max31855n" },
+ { .compatible = "maxim,max31855s" },
+ { .compatible = "maxim,max31855t" },
+ { .compatible = "maxim,max31855e" },
+ { .compatible = "maxim,max31855r" },
{ },
};
MODULE_DEVICE_TABLE(of, maxim_thermocouple_of_match);
diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
index a5dfe65cd9b9..2e0d32aa8436 100644
--- a/drivers/iio/trigger/stm32-timer-trigger.c
+++ b/drivers/iio/trigger/stm32-timer-trigger.c
@@ -297,9 +297,6 @@ static ssize_t stm32_tt_store_master_mode(struct device *dev,
strlen(master_mode_table[i]))) {
regmap_update_bits(priv->regmap, TIM_CR2, mask,
i << shift);
- /* Make sure that registers are updated */
- regmap_update_bits(priv->regmap, TIM_EGR,
- TIM_EGR_UG, TIM_EGR_UG);
return len;
}
}
diff --git a/drivers/staging/iio/accel/adis16240.c b/drivers/staging/iio/accel/adis16240.c
index a480409090c0..794f063e6c86 100644
--- a/drivers/staging/iio/accel/adis16240.c
+++ b/drivers/staging/iio/accel/adis16240.c
@@ -399,6 +399,13 @@ static int adis16240_probe(struct spi_device *spi)
indio_dev->num_channels = ARRAY_SIZE(adis16240_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
+ spi->mode = SPI_MODE_3;
+ ret = spi_setup(spi);
+ if (ret) {
+ dev_err(&spi->dev, "spi_setup failed!\n");
+ return ret;
+ }
+
ret = adis_init(st, indio_dev, spi, &adis16240_data);
if (ret)
return ret;
diff --git a/include/linux/iio/buffer_impl.h b/include/linux/iio/buffer_impl.h
index d1171db23742..a4d2d8061ef6 100644
--- a/include/linux/iio/buffer_impl.h
+++ b/include/linux/iio/buffer_impl.h
@@ -18,7 +18,7 @@ struct iio_buffer;
/**
* struct iio_buffer_access_funcs - access functions for buffers.
* @store_to: actually store stuff to the buffer
- * @read_first_n: try to get a specified number of bytes (must exist)
+ * @read: try to get a specified number of bytes (must exist)
* @data_available: indicates how much data is available for reading from
* the buffer.
* @request_update: if a parameter change has been marked, update underlying
@@ -45,9 +45,7 @@ struct iio_buffer;
**/
struct iio_buffer_access_funcs {
int (*store_to)(struct iio_buffer *buffer, const void *data);
- int (*read_first_n)(struct iio_buffer *buffer,
- size_t n,
- char __user *buf);
+ int (*read)(struct iio_buffer *buffer, size_t n, char __user *buf);
size_t (*data_available)(struct iio_buffer *buffer);
int (*request_update)(struct iio_buffer *buffer);
diff --git a/include/linux/iio/frequency/adf4350.h b/include/linux/iio/frequency/adf4350.h
index ce9490bfeb89..de45cf2ee1e4 100644
--- a/include/linux/iio/frequency/adf4350.h
+++ b/include/linux/iio/frequency/adf4350.h
@@ -103,9 +103,6 @@
* @r2_user_settings: User defined settings for ADF4350/1 REGISTER_2.
* @r3_user_settings: User defined settings for ADF4350/1 REGISTER_3.
* @r4_user_settings: User defined settings for ADF4350/1 REGISTER_4.
- * @gpio_lock_detect: Optional, if set with a valid GPIO number,
- * pll lock state is tested upon read.
- * If not used - set to -1.
*/
struct adf4350_platform_data {
@@ -121,7 +118,6 @@ struct adf4350_platform_data {
unsigned r2_user_settings;
unsigned r3_user_settings;
unsigned r4_user_settings;
- int gpio_lock_detect;
};
#endif /* IIO_PLL_ADF4350_H_ */
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index 92aae14593bf..4b5bc0e06e69 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -61,7 +61,7 @@ struct adis {
const struct adis_data *data;
struct adis_burst *burst;
- struct mutex txrx_lock;
+ struct mutex state_lock;
struct spi_message msg;
struct spi_transfer *xfer;
unsigned int current_page;
@@ -73,14 +73,143 @@ struct adis {
int adis_init(struct adis *adis, struct iio_dev *indio_dev,
struct spi_device *spi, const struct adis_data *data);
-int adis_reset(struct adis *adis);
+int __adis_reset(struct adis *adis);
-int adis_write_reg(struct adis *adis, unsigned int reg,
+/**
+ * adis_reset() - Reset the device
+ * @adis: The adis device
+ *
+ * Returns 0 on success, a negative error code otherwise
+ */
+static inline int adis_reset(struct adis *adis)
+{
+ int ret;
+
+ mutex_lock(&adis->state_lock);
+ ret = __adis_reset(adis);
+ mutex_unlock(&adis->state_lock);
+
+ return ret;
+}
+
+int __adis_write_reg(struct adis *adis, unsigned int reg,
unsigned int val, unsigned int size);
-int adis_read_reg(struct adis *adis, unsigned int reg,
+int __adis_read_reg(struct adis *adis, unsigned int reg,
unsigned int *val, unsigned int size);
/**
+ * __adis_write_reg_8() - Write single byte to a register (unlocked)
+ * @adis: The adis device
+ * @reg: The address of the register to be written
+ * @value: The value to write
+ */
+static inline int __adis_write_reg_8(struct adis *adis, unsigned int reg,
+ uint8_t val)
+{
+ return __adis_write_reg(adis, reg, val, 1);
+}
+
+/**
+ * __adis_write_reg_16() - Write 2 bytes to a pair of registers (unlocked)
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @value: Value to be written
+ */
+static inline int __adis_write_reg_16(struct adis *adis, unsigned int reg,
+ uint16_t val)
+{
+ return __adis_write_reg(adis, reg, val, 2);
+}
+
+/**
+ * __adis_write_reg_32() - write 4 bytes to four registers (unlocked)
+ * @adis: The adis device
+ * @reg: The address of the lower of the four register
+ * @value: Value to be written
+ */
+static inline int __adis_write_reg_32(struct adis *adis, unsigned int reg,
+ uint32_t val)
+{
+ return __adis_write_reg(adis, reg, val, 4);
+}
+
+/**
+ * __adis_read_reg_16() - read 2 bytes from a 16-bit register (unlocked)
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ */
+static inline int __adis_read_reg_16(struct adis *adis, unsigned int reg,
+ uint16_t *val)
+{
+ unsigned int tmp;
+ int ret;
+
+ ret = __adis_read_reg(adis, reg, &tmp, 2);
+ if (ret == 0)
+ *val = tmp;
+
+ return ret;
+}
+
+/**
+ * __adis_read_reg_32() - read 4 bytes from a 32-bit register (unlocked)
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ */
+static inline int __adis_read_reg_32(struct adis *adis, unsigned int reg,
+ uint32_t *val)
+{
+ unsigned int tmp;
+ int ret;
+
+ ret = __adis_read_reg(adis, reg, &tmp, 4);
+ if (ret == 0)
+ *val = tmp;
+
+ return ret;
+}
+
+/**
+ * adis_write_reg() - write N bytes to register
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @value: The value to write to device (up to 4 bytes)
+ * @size: The size of the @value (in bytes)
+ */
+static inline int adis_write_reg(struct adis *adis, unsigned int reg,
+ unsigned int val, unsigned int size)
+{
+ int ret;
+
+ mutex_lock(&adis->state_lock);
+ ret = __adis_write_reg(adis, reg, val, size);
+ mutex_unlock(&adis->state_lock);
+
+ return ret;
+}
+
+/**
+ * adis_read_reg() - read N bytes from register
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @val: The value read back from the device
+ * @size: The size of the @val buffer
+ */
+static int adis_read_reg(struct adis *adis, unsigned int reg,
+ unsigned int *val, unsigned int size)
+{
+ int ret;
+
+ mutex_lock(&adis->state_lock);
+ ret = __adis_read_reg(adis, reg, val, size);
+ mutex_unlock(&adis->state_lock);
+
+ return ret;
+}
+
+/**
* adis_write_reg_8() - Write single byte to a register
* @adis: The adis device
* @reg: The address of the register to be written
@@ -155,7 +284,18 @@ static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
}
int adis_enable_irq(struct adis *adis, bool enable);
-int adis_check_status(struct adis *adis);
+int __adis_check_status(struct adis *adis);
+
+static inline int adis_check_status(struct adis *adis)
+{
+ int ret;
+
+ mutex_lock(&adis->state_lock);
+ ret = __adis_check_status(adis);
+ mutex_unlock(&adis->state_lock);
+
+ return ret;
+}
int adis_initial_startup(struct adis *adis);
diff --git a/include/linux/iio/magnetometer/ak8975.h b/include/linux/iio/magnetometer/ak8975.h
index ac9366f807cb..df3697183800 100644
--- a/include/linux/iio/magnetometer/ak8975.h
+++ b/include/linux/iio/magnetometer/ak8975.h
@@ -6,11 +6,9 @@
/**
* struct ak8975_platform_data - AK8975 magnetometer driver platform data
- * @eoc_gpio: data ready event gpio
* @orientation: mounting matrix relative to main hardware
*/
struct ak8975_platform_data {
- int eoc_gpio;
struct iio_mount_matrix orientation;
};
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index fa824e160f35..e6fd3645963c 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -25,6 +25,7 @@ enum iio_event_info {
#define IIO_VAL_INT_MULTIPLE 5
#define IIO_VAL_FRACTIONAL 10
#define IIO_VAL_FRACTIONAL_LOG2 11
+#define IIO_VAL_CHAR 12
enum iio_available_type {
IIO_AVAIL_LIST,
@@ -57,6 +58,7 @@ enum iio_chan_info_enum {
IIO_CHAN_INFO_DEBOUNCE_TIME,
IIO_CHAN_INFO_CALIBEMISSIVITY,
IIO_CHAN_INFO_OVERSAMPLING_RATIO,
+ IIO_CHAN_INFO_THERMOCOUPLE_TYPE,
};
#endif /* _IIO_TYPES_H_ */
diff --git a/include/linux/platform_data/ad7266.h b/include/linux/platform_data/ad7266.h
index 7de6c16122df..f0652567afba 100644
--- a/include/linux/platform_data/ad7266.h
+++ b/include/linux/platform_data/ad7266.h
@@ -40,14 +40,11 @@ enum ad7266_mode {
* @range: Reference voltage range the device is configured for
* @mode: Sample mode the device is configured for
* @fixed_addr: Whether the address pins are hard-wired
- * @addr_gpios: GPIOs used for controlling the address pins, only used if
- * fixed_addr is set to false.
*/
struct ad7266_platform_data {
enum ad7266_range range;
enum ad7266_mode mode;
bool fixed_addr;
- unsigned int addr_gpios[3];
};
#endif
diff --git a/include/linux/platform_data/ads1015.h b/include/linux/platform_data/ads1015.h
deleted file mode 100644
index 4cc9ffcafcbf..000000000000
--- a/include/linux/platform_data/ads1015.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Platform Data for ADS1015 12-bit 4-input ADC
- * (C) Copyright 2010
- * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
- */
-
-#ifndef LINUX_ADS1015_H
-#define LINUX_ADS1015_H
-
-#define ADS1015_CHANNELS 8
-
-struct ads1015_channel_data {
- bool enabled;
- unsigned int pga;
- unsigned int data_rate;
-};
-
-struct ads1015_platform_data {
- struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
-};
-
-#endif /* LINUX_ADS1015_H */