diff options
20 files changed, 392 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index 1b1a74129141..c000d224b4e0 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -16,6 +16,7 @@ Required properties: + "arm,mali-t880" * which must be preceded by one of the following vendor specifics: + "amlogic,meson-gxm-mali" + + "samsung,exynos5433-mali" + "rockchip,rk3288-mali" + "rockchip,rk3399-mali" diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index ae63f09fda7d..b352a6851a06 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -17,6 +17,7 @@ Required properties: + amlogic,meson8b-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + samsung,exynos4210-mali + rockchip,rk3036-mali + rockchip,rk3066-mali + rockchip,rk3188-mali diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index ace50e194a45..dee35e3a5c4b 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -59,6 +59,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index e25765500e99..248bd372fe70 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -172,6 +172,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 7479993755da..86c26a4edfd7 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -244,6 +244,11 @@ }; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 8ce3a7786b19..c17870a54acf 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -126,6 +126,39 @@ }; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&cmu CLK_G3D>, + <&cmu CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + /* TODO: operating points for DVFS, assigned clock as 134 MHz */ + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 36ccf227434d..6005cfbbed89 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -51,10 +51,46 @@ serial3 = &serial_3; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + /* + * CLK_G3D is not actually bus clock but a IP-level clock. + * The bus clock is not described in hardware manual. + */ + clocks = <&clock CLK_G3D>, + <&clock CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + }; + pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>; + status = "disabled"; }; soc: soc { diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 36b1edea254a..0d1e1a9c2f6e 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -132,6 +132,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo3_reg>; vusb_a-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 6882480dbaf7..7c39dd1c4d3a 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -239,6 +239,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &hsotg { vusb_d-supply = <&vusb_reg>; vusb_a-supply = <&vusbdac_reg>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index bf092e97e14f..82a8b5449978 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -262,6 +262,11 @@ }; }; +&gpu { + mali-supply = <&buck2_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index b491c345b2e8..6122da368092 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -8,7 +8,7 @@ * www.linaro.org * * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in @@ -381,13 +381,13 @@ trips { cpu_alert0: cpu-alert-0 { - temperature = <85000>; /* millicelsius */ + temperature = <85000>; /* millicelsius */ }; cpu_alert1: cpu-alert-1 { - temperature = <100000>; /* millicelsius */ + temperature = <100000>; /* millicelsius */ }; cpu_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ + temperature = <110000>; /* millicelsius */ }; }; }; @@ -449,6 +449,23 @@ samsung,lcd-wb; }; +&gpu { + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1050000>; + }; + }; +}; + &mdma1 { power-domains = <&pd_lcd0>; }; @@ -461,6 +478,12 @@ <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; }; +&pmu { + interrupts = <2 2>, <3 2>; + interrupt-affinity = <&cpu0>, <&cpu1>; + status = "okay"; +}; + &pmu_system_controller { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 30eee5942eff..ce87d2ff27aa 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -15,6 +15,24 @@ i2c10 = &i2c_cm36651; }; + aat1290 { + compatible = "skyworks,aat1290"; + flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; + enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "host", "isp"; + pinctrl-0 = <&camera_flash_host>; + pinctrl-1 = <&camera_flash_host>; + pinctrl-2 = <&camera_flash_isp>; + + flash-led { + label = "flash"; + led-max-microamp = <520833>; + flash-max-microamp = <1012500>; + flash-max-timeout-us = <1940000>; + }; + }; + lcd_vdd3_reg: voltage-regulator-6 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; @@ -131,6 +149,20 @@ regulator-max-microvolt = <2800000>; }; +&pinctrl_0 { + camera_flash_host: camera-flash-host { + samsung,pins = "gpj1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-val = <0>; + }; + + camera_flash_isp: camera-flash-isp { + samsung,pins = "gpj1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-val = <1>; + }; +}; + &s5c73m3 { standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ vdda-supply = <&ldo17_reg>; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index 0038465f38f1..462a5409b1de 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -115,6 +115,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 4c15cb616cdf..83be3a797411 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -453,6 +453,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 08d3a0a7b4eb..ea55f377d17c 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -229,6 +229,11 @@ assigned-clock-rates = <0>, <176000000>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi index d83fbd4e434c..3731a225f779 100644 --- a/arch/arm/boot/dts/exynos4412-prime.dtsi +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -38,3 +38,10 @@ cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, <&cpu2 15 15>, <&cpu3 15 15>; }; + +&gpu_opp_table { + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1075000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index e5c041ec0756..7bed6842575a 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -716,6 +716,31 @@ cpu-offset = <0x4000>; }; +&gpu { + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <875000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <900000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <950000>; + }; + opp-440000000 { + opp-hz = /bits/ 64 <440000000>; + opp-microvolt = <1025000>; + }; + }; +}; + &hdmi { compatible = "samsung,exynos4212-hdmi"; }; @@ -737,6 +762,8 @@ &pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + status = "okay"; }; &pmu_system_controller { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index dc9162a17475..ac7f2fa0ba22 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -386,6 +386,10 @@ * (Linaro for Arndale Octa, v2012.07). */ regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo4_reg: LDO4 { @@ -411,6 +415,10 @@ regulator-name = "PVDD_ANAIP_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo8_reg: LDO8 { @@ -451,6 +459,10 @@ regulator-name = "PVDD_APIO_MMCOFF_2V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo14_reg: LDO14 { @@ -464,12 +476,20 @@ regulator-name = "PVDD_PERI_2V8"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo16_reg: LDO16 { regulator-name = "PVDD_PERI_3V3"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -483,12 +503,28 @@ regulator-name = "PVDD_EMMC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + /* + * Must stay in "off" mode during shutdown for + * proper eMMC reset. The "off" mode is in + * fact controlled by LDO18EN. The eMMC does + * not have reset pin connected so the reset + * will be triggered by falling edge of + * LDO18EN. + */ + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo19_reg: LDO19 { regulator-name = "PVDD_TFLASH_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo20_reg: LDO20 { @@ -515,12 +551,20 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo24_reg: LDO24 { regulator-name = "PVDD_CAM1_AVDD_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo25_reg: LDO25 { @@ -540,6 +584,10 @@ regulator-name = "PVDD_G3DS_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo28_reg: LDO28 { @@ -617,6 +665,10 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -624,6 +676,10 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -631,12 +687,20 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { regulator-name = "PVDD_G3D_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -651,6 +715,10 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { @@ -678,6 +746,18 @@ regulator-name = "PVDD_EMMCF_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + /* + * Must stay in "off" mode during shutdown for + * proper eMMC reset. The "off" mode is in + * fact controlled by BUCK10EN. The eMMC does + * not have reset pin connected so the reset + * will be triggered by falling edge of + * BUCK10EN. + */ + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; @@ -700,7 +780,7 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - vmmc-supply = <&ldo10_reg>; + vmmc-supply = <&ldo18_reg>; vqmmc-supply = <&ldo3_reg>; bus-width = <8>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 25d95de15c9b..9843d21d6924 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -177,6 +177,10 @@ regulator-name = "vdd_adc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -184,6 +188,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -191,6 +199,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -198,6 +210,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo8_reg: LDO8 { @@ -205,6 +221,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -212,6 +232,10 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo10_reg: LDO10 { @@ -219,6 +243,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -226,6 +254,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo12_reg: LDO12 { @@ -239,6 +271,10 @@ regulator-name = "vddq_mmc2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo14_reg: LDO14 { @@ -253,6 +289,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo16_reg: LDO16 { @@ -267,18 +307,30 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { regulator-name = "vdd_emmc_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo19_reg: LDO19 { regulator-name = "vdd_sd"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo20_reg: LDO20 { @@ -307,6 +359,10 @@ regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo24_reg: LDO24 { @@ -328,6 +384,10 @@ regulator-name = "vdd_ldo26"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo27_reg: LDO27 { @@ -335,6 +395,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo28_reg: LDO28 { @@ -342,6 +406,10 @@ regulator-name = "vdd_ldo28"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo29_reg: LDO29 { @@ -420,6 +488,10 @@ regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -428,6 +500,10 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -436,6 +512,10 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -444,6 +524,10 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -460,6 +544,10 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { @@ -484,14 +572,20 @@ regulator-max-microvolt = <3750000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck10_reg: BUCK10 { regulator-name = "vdd_vmem"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 93a48f2dda49..838872037493 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -360,6 +360,12 @@ }; }; +&buck10_reg { + /* Supplies vmmc-supply of mmc_0 */ + regulator-always-on; + regulator-boot-on; +}; + &hdmi { status = "okay"; ddc = <&i2c_2>; |