diff options
85 files changed, 0 insertions, 28753 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 38fe2f3f7b6f..9a4c715d1e50 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3919,11 +3919,6 @@ F: certs/ F: scripts/sign-file.c F: scripts/extract-cert.c -CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM: -L: devel@driverdev.osuosl.org -S: Obsolete -F: drivers/staging/wusbcore/ - CFAG12864B LCD DRIVER M: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> S: Maintained @@ -17094,11 +17089,6 @@ S: Maintained F: drivers/usb/common/ulpi.c F: include/linux/ulpi/ -ULTRA-WIDEBAND (UWB) SUBSYSTEM: -L: devel@driverdev.osuosl.org -S: Obsolete -F: drivers/staging/uwb/ - UNICODE SUBSYSTEM: M: Gabriel Krisman Bertazi <krisman@collabora.com> L: linux-fsdevel@vger.kernel.org diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index baccd7c883cc..0f82e23e151b 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -112,9 +112,6 @@ source "drivers/staging/fieldbus/Kconfig" source "drivers/staging/kpc2000/Kconfig" -source "drivers/staging/wusbcore/Kconfig" -source "drivers/staging/uwb/Kconfig" - source "drivers/staging/exfat/Kconfig" source "drivers/staging/qlge/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index fdd03fd6e704..49b21951b6f2 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -46,8 +46,6 @@ obj-$(CONFIG_STAGING_GASKET_FRAMEWORK) += gasket/ obj-$(CONFIG_XIL_AXIS_FIFO) += axis-fifo/ obj-$(CONFIG_FIELDBUS_DEV) += fieldbus/ obj-$(CONFIG_KPC2000) += kpc2000/ -obj-$(CONFIG_UWB) += uwb/ -obj-$(CONFIG_USB_WUSB) += wusbcore/ obj-$(CONFIG_STAGING_EXFAT_FS) += exfat/ obj-$(CONFIG_QLGE) += qlge/ obj-$(CONFIG_NET_VENDOR_HP) += hp/ diff --git a/drivers/staging/uwb/Kconfig b/drivers/staging/uwb/Kconfig deleted file mode 100644 index 259e053e1e09..000000000000 --- a/drivers/staging/uwb/Kconfig +++ /dev/null @@ -1,72 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# UWB device configuration -# - -menuconfig UWB - tristate "Ultra Wideband devices" - default n - select GENERIC_NET_UTILS - help - UWB is a high-bandwidth, low-power, point-to-point radio - technology using a wide spectrum (3.1-10.6GHz). It is - optimized for in-room use (480Mbps at 2 meters, 110Mbps at - 10m). It serves as the transport layer for other protocols, - such as Wireless USB (WUSB). - - The topology is peer to peer; however, higher level - protocols (such as WUSB) might impose a master/slave - relationship. - - Say Y here if your computer has UWB radio controllers (USB or PCI) - based. You will need to enable the radio controllers - below. It is ok to select all of them, no harm done. - - For more help check the UWB and WUSB related files in - <file:Documentation/usb/>. - - To compile the UWB stack as a module, choose M here. - -if UWB - -config UWB_HWA - tristate "UWB Radio Control driver for WUSB-compliant USB dongles (HWA)" - depends on USB - help - This driver enables the radio controller for HWA USB - devices. HWA stands for Host Wire Adapter, and it is a UWB - Radio Controller connected to your system via USB. Most of - them come with a Wireless USB host controller also. - - To compile this driver select Y (built in) or M (module). It - is safe to select any even if you do not have the hardware. - -config UWB_WHCI - tristate "UWB Radio Control driver for WHCI-compliant cards" - depends on PCI - help - This driver enables the radio controller for WHCI cards. - - WHCI is a specification developed by Intel - (http://www.intel.com/technology/comms/wusb/whci.htm) much - in the spirit of USB's EHCI, but for UWB and Wireless USB - radio/host controllers connected via memory mapping (eg: - PCI). Most of these cards come also with a Wireless USB host - controller. - - To compile this driver select Y (built in) or M (module). It - is safe to select any even if you do not have the hardware. - -config UWB_I1480U - tristate "Support for Intel Wireless UWB Link 1480 HWA" - depends on UWB_HWA - select FW_LOADER - help - This driver enables support for the i1480 when connected via - USB. It consists of a firmware uploader that will enable it - to behave as an HWA device. - - To compile this driver select Y (built in) or M (module). It - is safe to select any even if you do not have the hardware. - -endif # UWB diff --git a/drivers/staging/uwb/Makefile b/drivers/staging/uwb/Makefile deleted file mode 100644 index 32f4de7afbd6..000000000000 --- a/drivers/staging/uwb/Makefile +++ /dev/null @@ -1,32 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_UWB) += uwb.o -obj-$(CONFIG_UWB_WHCI) += umc.o whci.o whc-rc.o -obj-$(CONFIG_UWB_HWA) += hwa-rc.o -obj-$(CONFIG_UWB_I1480U) += i1480/ - -uwb-objs := \ - address.o \ - allocator.o \ - beacon.o \ - driver.o \ - drp.o \ - drp-avail.o \ - drp-ie.o \ - est.o \ - ie.o \ - ie-rcv.o \ - lc-dev.o \ - lc-rc.o \ - neh.o \ - pal.o \ - radio.o \ - reset.o \ - rsv.o \ - scan.o \ - uwb-debug.o \ - uwbd.o - -umc-objs := \ - umc-bus.o \ - umc-dev.o \ - umc-drv.o diff --git a/drivers/staging/uwb/TODO b/drivers/staging/uwb/TODO deleted file mode 100644 index abae57000534..000000000000 --- a/drivers/staging/uwb/TODO +++ /dev/null @@ -1,8 +0,0 @@ -TODO: Remove in late 2019 unless there are users - -There seems to not be any real wireless USB devices anywhere in the wild -anymore. It turned out to be a failed technology :( - -This will be removed from the tree if no one objects. - -Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff --git a/drivers/staging/uwb/address.c b/drivers/staging/uwb/address.c deleted file mode 100644 index 857d5cd56a95..000000000000 --- a/drivers/staging/uwb/address.c +++ /dev/null @@ -1,352 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Address management - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - */ - -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/random.h> -#include <linux/etherdevice.h> - -#include "uwb-internal.h" - - -/** Device Address Management command */ -struct uwb_rc_cmd_dev_addr_mgmt { - struct uwb_rccb rccb; - u8 bmOperationType; - u8 baAddr[6]; -} __attribute__((packed)); - - -/** - * Low level command for setting/getting UWB radio's addresses - * - * @hwarc: HWA Radio Control interface instance - * @bmOperationType: - * Set/get, MAC/DEV (see WUSB1.0[8.6.2.2]) - * @baAddr: address buffer--assumed to have enough data to hold - * the address type requested. - * @reply: Pointer to reply buffer (can be stack allocated) - * @returns: 0 if ok, < 0 errno code on error. - * - * @cmd has to be allocated because USB cannot grok USB or vmalloc - * buffers depending on your combination of host architecture. - */ -static -int uwb_rc_dev_addr_mgmt(struct uwb_rc *rc, - u8 bmOperationType, const u8 *baAddr, - struct uwb_rc_evt_dev_addr_mgmt *reply) -{ - int result; - struct uwb_rc_cmd_dev_addr_mgmt *cmd; - - result = -ENOMEM; - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (cmd == NULL) - goto error_kzalloc; - cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; - cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_DEV_ADDR_MGMT); - cmd->bmOperationType = bmOperationType; - if (baAddr) { - size_t size = 0; - switch (bmOperationType >> 1) { - case 0: size = 2; break; - case 1: size = 6; break; - default: BUG(); - } - memcpy(cmd->baAddr, baAddr, size); - } - reply->rceb.bEventType = UWB_RC_CET_GENERAL; - reply->rceb.wEvent = UWB_RC_CMD_DEV_ADDR_MGMT; - result = uwb_rc_cmd(rc, "DEV-ADDR-MGMT", - &cmd->rccb, sizeof(*cmd), - &reply->rceb, sizeof(*reply)); - if (result < 0) - goto error_cmd; - if (result < sizeof(*reply)) { - dev_err(&rc->uwb_dev.dev, - "DEV-ADDR-MGMT: not enough data replied: " - "%d vs %zu bytes needed\n", result, sizeof(*reply)); - result = -ENOMSG; - } else if (reply->bResultCode != UWB_RC_RES_SUCCESS) { - dev_err(&rc->uwb_dev.dev, - "DEV-ADDR-MGMT: command execution failed: %s (%d)\n", - uwb_rc_strerror(reply->bResultCode), - reply->bResultCode); - result = -EIO; - } else - result = 0; -error_cmd: - kfree(cmd); -error_kzalloc: - return result; -} - - -/** - * Set the UWB RC MAC or device address. - * - * @rc: UWB Radio Controller - * @_addr: Pointer to address to write [assumed to be either a - * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *']. - * @type: Type of address to set (UWB_ADDR_DEV or UWB_ADDR_MAC). - * @returns: 0 if ok, < 0 errno code on error. - * - * Some anal retentivity here: even if both 'struct - * uwb_{dev,mac}_addr' have the actual byte array in the same offset - * and I could just pass _addr to hwarc_cmd_dev_addr_mgmt(), I prefer - * to use some syntatic sugar in case someday we decide to change the - * format of the structs. The compiler will optimize it out anyway. - */ -static int uwb_rc_addr_set(struct uwb_rc *rc, - const void *_addr, enum uwb_addr_type type) -{ - int result; - u8 bmOperationType = 0x1; /* Set address */ - const struct uwb_dev_addr *dev_addr = _addr; - const struct uwb_mac_addr *mac_addr = _addr; - struct uwb_rc_evt_dev_addr_mgmt reply; - const u8 *baAddr; - - result = -EINVAL; - switch (type) { - case UWB_ADDR_DEV: - baAddr = dev_addr->data; - break; - case UWB_ADDR_MAC: - baAddr = mac_addr->data; - bmOperationType |= 0x2; - break; - default: - return result; - } - return uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &reply); -} - - -/** - * Get the UWB radio's MAC or device address. - * - * @rc: UWB Radio Controller - * @_addr: Where to write the address data [assumed to be either a - * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *']. - * @type: Type of address to get (UWB_ADDR_DEV or UWB_ADDR_MAC). - * @returns: 0 if ok (and *_addr set), < 0 errno code on error. - * - * See comment in uwb_rc_addr_set() about anal retentivity in the - * type handling of the address variables. - */ -static int uwb_rc_addr_get(struct uwb_rc *rc, - void *_addr, enum uwb_addr_type type) -{ - int result; - u8 bmOperationType = 0x0; /* Get address */ - struct uwb_rc_evt_dev_addr_mgmt evt; - struct uwb_dev_addr *dev_addr = _addr; - struct uwb_mac_addr *mac_addr = _addr; - u8 *baAddr; - - result = -EINVAL; - switch (type) { - case UWB_ADDR_DEV: - baAddr = dev_addr->data; - break; - case UWB_ADDR_MAC: - bmOperationType |= 0x2; - baAddr = mac_addr->data; - break; - default: - return result; - } - result = uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &evt); - if (result == 0) - switch (type) { - case UWB_ADDR_DEV: - memcpy(&dev_addr->data, evt.baAddr, - sizeof(dev_addr->data)); - break; - case UWB_ADDR_MAC: - memcpy(&mac_addr->data, evt.baAddr, - sizeof(mac_addr->data)); - break; - default: /* shut gcc up */ - BUG(); - } - return result; -} - - -/** Get @rc's MAC address to @addr */ -int uwb_rc_mac_addr_get(struct uwb_rc *rc, - struct uwb_mac_addr *addr) { - return uwb_rc_addr_get(rc, addr, UWB_ADDR_MAC); -} -EXPORT_SYMBOL_GPL(uwb_rc_mac_addr_get); - - -/** Get @rc's device address to @addr */ -int uwb_rc_dev_addr_get(struct uwb_rc *rc, - struct uwb_dev_addr *addr) { - return uwb_rc_addr_get(rc, addr, UWB_ADDR_DEV); -} -EXPORT_SYMBOL_GPL(uwb_rc_dev_addr_get); - - -/** Set @rc's address to @addr */ -int uwb_rc_mac_addr_set(struct uwb_rc *rc, - const struct uwb_mac_addr *addr) -{ - int result = -EINVAL; - mutex_lock(&rc->uwb_dev.mutex); - result = uwb_rc_addr_set(rc, addr, UWB_ADDR_MAC); - mutex_unlock(&rc->uwb_dev.mutex); - return result; -} - - -/** Set @rc's address to @addr */ -int uwb_rc_dev_addr_set(struct uwb_rc *rc, - const struct uwb_dev_addr *addr) -{ - int result = -EINVAL; - mutex_lock(&rc->uwb_dev.mutex); - result = uwb_rc_addr_set(rc, addr, UWB_ADDR_DEV); - rc->uwb_dev.dev_addr = *addr; - mutex_unlock(&rc->uwb_dev.mutex); - return result; -} - -/* Returns !0 if given address is already assigned to device. */ -int __uwb_mac_addr_assigned_check(struct device *dev, void *_addr) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_mac_addr *addr = _addr; - - if (!uwb_mac_addr_cmp(addr, &uwb_dev->mac_addr)) - return !0; - return 0; -} - -/* Returns !0 if given address is already assigned to device. */ -int __uwb_dev_addr_assigned_check(struct device *dev, void *_addr) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_dev_addr *addr = _addr; - if (!uwb_dev_addr_cmp(addr, &uwb_dev->dev_addr)) - return !0; - return 0; -} - -/** - * uwb_dev_addr_assign - assigned a generated DevAddr to a radio controller - * @rc: the (local) radio controller device requiring a new DevAddr - * - * A new DevAddr is required when: - * - first setting up a radio controller - * - if the hardware reports a DevAddr conflict - * - * The DevAddr is randomly generated in the generated DevAddr range - * [0x100, 0xfeff]. The number of devices in a beacon group is limited - * by mMaxBPLength (96) so this address space will never be exhausted. - * - * [ECMA-368] 17.1.1, 17.16. - */ -int uwb_rc_dev_addr_assign(struct uwb_rc *rc) -{ - struct uwb_dev_addr new_addr; - - do { - get_random_bytes(new_addr.data, sizeof(new_addr.data)); - } while (new_addr.data[0] == 0x00 || new_addr.data[0] == 0xff - || __uwb_dev_addr_assigned(rc, &new_addr)); - - return uwb_rc_dev_addr_set(rc, &new_addr); -} - -/** - * uwbd_evt_handle_rc_dev_addr_conflict - handle a DEV_ADDR_CONFLICT event - * @evt: the DEV_ADDR_CONFLICT notification from the radio controller - * - * A new (non-conflicting) DevAddr is assigned to the radio controller. - * - * [ECMA-368] 17.1.1.1. - */ -int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt) -{ - struct uwb_rc *rc = evt->rc; - - return uwb_rc_dev_addr_assign(rc); -} - -/* - * Print the 48-bit EUI MAC address of the radio controller when - * reading /sys/class/uwb_rc/XX/mac_address - */ -static ssize_t uwb_rc_mac_addr_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_rc *rc = uwb_dev->rc; - struct uwb_mac_addr addr; - ssize_t result; - - mutex_lock(&rc->uwb_dev.mutex); - result = uwb_rc_addr_get(rc, &addr, UWB_ADDR_MAC); - mutex_unlock(&rc->uwb_dev.mutex); - if (result >= 0) { - result = uwb_mac_addr_print(buf, UWB_ADDR_STRSIZE, &addr); - buf[result++] = '\n'; - } - return result; -} - -/* - * Parse a 48 bit address written to /sys/class/uwb_rc/XX/mac_address - * and if correct, set it. - */ -static ssize_t uwb_rc_mac_addr_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_rc *rc = uwb_dev->rc; - struct uwb_mac_addr addr; - ssize_t result; - - if (!mac_pton(buf, addr.data)) - return -EINVAL; - if (is_multicast_ether_addr(addr.data)) { - dev_err(&rc->uwb_dev.dev, "refusing to set multicast " - "MAC address %s\n", buf); - return -EINVAL; - } - result = uwb_rc_mac_addr_set(rc, &addr); - if (result == 0) - rc->uwb_dev.mac_addr = addr; - - return result < 0 ? result : size; -} -DEVICE_ATTR(mac_address, S_IRUGO | S_IWUSR, uwb_rc_mac_addr_show, uwb_rc_mac_addr_store); - -/** Print @addr to @buf, @return bytes written */ -size_t __uwb_addr_print(char *buf, size_t buf_size, const unsigned char *addr, - int type) -{ - size_t result; - if (type) - result = scnprintf(buf, buf_size, "%pM", addr); - else - result = scnprintf(buf, buf_size, "%02x:%02x", - addr[1], addr[0]); - return result; -} -EXPORT_SYMBOL_GPL(__uwb_addr_print); diff --git a/drivers/staging/uwb/allocator.c b/drivers/staging/uwb/allocator.c deleted file mode 100644 index 1f429fba20b7..000000000000 --- a/drivers/staging/uwb/allocator.c +++ /dev/null @@ -1,374 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * UWB reservation management. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include "uwb.h" - -#include "uwb-internal.h" - -static void uwb_rsv_fill_column_alloc(struct uwb_rsv_alloc_info *ai) -{ - int col, mas, safe_mas, unsafe_mas; - unsigned char *bm = ai->bm; - struct uwb_rsv_col_info *ci = ai->ci; - unsigned char c; - - for (col = ci->csi.start_col; col < UWB_NUM_ZONES; col += ci->csi.interval) { - - safe_mas = ci->csi.safe_mas_per_col; - unsafe_mas = ci->csi.unsafe_mas_per_col; - - for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++ ) { - if (bm[col * UWB_MAS_PER_ZONE + mas] == 0) { - - if (safe_mas > 0) { - safe_mas--; - c = UWB_RSV_MAS_SAFE; - } else if (unsafe_mas > 0) { - unsafe_mas--; - c = UWB_RSV_MAS_UNSAFE; - } else { - break; - } - bm[col * UWB_MAS_PER_ZONE + mas] = c; - } - } - } -} - -static void uwb_rsv_fill_row_alloc(struct uwb_rsv_alloc_info *ai) -{ - int mas, col, rows; - unsigned char *bm = ai->bm; - struct uwb_rsv_row_info *ri = &ai->ri; - unsigned char c; - - rows = 1; - c = UWB_RSV_MAS_SAFE; - for (mas = UWB_MAS_PER_ZONE - 1; mas >= 0; mas--) { - if (ri->avail[mas] == 1) { - - if (rows > ri->used_rows) { - break; - } else if (rows > 7) { - c = UWB_RSV_MAS_UNSAFE; - } - - for (col = 0; col < UWB_NUM_ZONES; col++) { - if (bm[col * UWB_NUM_ZONES + mas] != UWB_RSV_MAS_NOT_AVAIL) { - bm[col * UWB_NUM_ZONES + mas] = c; - if(c == UWB_RSV_MAS_SAFE) - ai->safe_allocated_mases++; - else - ai->unsafe_allocated_mases++; - } - } - rows++; - } - } - ai->total_allocated_mases = ai->safe_allocated_mases + ai->unsafe_allocated_mases; -} - -/* - * Find the best column set for a given availability, interval, num safe mas and - * num unsafe mas. - * - * The different sets are tried in order as shown below, depending on the interval. - * - * interval = 16 - * deep = 0 - * set 1 -> { 8 } - * deep = 1 - * set 1 -> { 4 } - * set 2 -> { 12 } - * deep = 2 - * set 1 -> { 2 } - * set 2 -> { 6 } - * set 3 -> { 10 } - * set 4 -> { 14 } - * deep = 3 - * set 1 -> { 1 } - * set 2 -> { 3 } - * set 3 -> { 5 } - * set 4 -> { 7 } - * set 5 -> { 9 } - * set 6 -> { 11 } - * set 7 -> { 13 } - * set 8 -> { 15 } - * - * interval = 8 - * deep = 0 - * set 1 -> { 4 12 } - * deep = 1 - * set 1 -> { 2 10 } - * set 2 -> { 6 14 } - * deep = 2 - * set 1 -> { 1 9 } - * set 2 -> { 3 11 } - * set 3 -> { 5 13 } - * set 4 -> { 7 15 } - * - * interval = 4 - * deep = 0 - * set 1 -> { 2 6 10 14 } - * deep = 1 - * set 1 -> { 1 5 9 13 } - * set 2 -> { 3 7 11 15 } - * - * interval = 2 - * deep = 0 - * set 1 -> { 1 3 5 7 9 11 13 15 } - */ -static int uwb_rsv_find_best_column_set(struct uwb_rsv_alloc_info *ai, int interval, - int num_safe_mas, int num_unsafe_mas) -{ - struct uwb_rsv_col_info *ci = ai->ci; - struct uwb_rsv_col_set_info *csi = &ci->csi; - struct uwb_rsv_col_set_info tmp_csi; - int deep, set, col, start_col_deep, col_start_set; - int start_col, max_mas_in_set, lowest_max_mas_in_deep; - int n_mas; - int found = UWB_RSV_ALLOC_NOT_FOUND; - - tmp_csi.start_col = 0; - start_col_deep = interval; - n_mas = num_unsafe_mas + num_safe_mas; - - for (deep = 0; ((interval >> deep) & 0x1) == 0; deep++) { - start_col_deep /= 2; - col_start_set = 0; - lowest_max_mas_in_deep = UWB_MAS_PER_ZONE; - - for (set = 1; set <= (1 << deep); set++) { - max_mas_in_set = 0; - start_col = start_col_deep + col_start_set; - for (col = start_col; col < UWB_NUM_ZONES; col += interval) { - - if (ci[col].max_avail_safe >= num_safe_mas && - ci[col].max_avail_unsafe >= n_mas) { - if (ci[col].highest_mas[n_mas] > max_mas_in_set) - max_mas_in_set = ci[col].highest_mas[n_mas]; - } else { - max_mas_in_set = 0; - break; - } - } - if ((lowest_max_mas_in_deep > max_mas_in_set) && max_mas_in_set) { - lowest_max_mas_in_deep = max_mas_in_set; - - tmp_csi.start_col = start_col; - } - col_start_set += (interval >> deep); - } - - if (lowest_max_mas_in_deep < 8) { - csi->start_col = tmp_csi.start_col; - found = UWB_RSV_ALLOC_FOUND; - break; - } else if ((lowest_max_mas_in_deep > 8) && - (lowest_max_mas_in_deep != UWB_MAS_PER_ZONE) && - (found == UWB_RSV_ALLOC_NOT_FOUND)) { - csi->start_col = tmp_csi.start_col; - found = UWB_RSV_ALLOC_FOUND; - } - } - - if (found == UWB_RSV_ALLOC_FOUND) { - csi->interval = interval; - csi->safe_mas_per_col = num_safe_mas; - csi->unsafe_mas_per_col = num_unsafe_mas; - - ai->safe_allocated_mases = (UWB_NUM_ZONES / interval) * num_safe_mas; - ai->unsafe_allocated_mases = (UWB_NUM_ZONES / interval) * num_unsafe_mas; - ai->total_allocated_mases = ai->safe_allocated_mases + ai->unsafe_allocated_mases; - ai->interval = interval; - } - return found; -} - -static void get_row_descriptors(struct uwb_rsv_alloc_info *ai) -{ - unsigned char *bm = ai->bm; - struct uwb_rsv_row_info *ri = &ai->ri; - int col, mas; - - ri->free_rows = 16; - for (mas = 0; mas < UWB_MAS_PER_ZONE; mas ++) { - ri->avail[mas] = 1; - for (col = 1; col < UWB_NUM_ZONES; col++) { - if (bm[col * UWB_NUM_ZONES + mas] == UWB_RSV_MAS_NOT_AVAIL) { - ri->free_rows--; - ri->avail[mas]=0; - break; - } - } - } -} - -static void uwb_rsv_fill_column_info(unsigned char *bm, int column, struct uwb_rsv_col_info *rci) -{ - int mas; - int block_count = 0, start_block = 0; - int previous_avail = 0; - int available = 0; - int safe_mas_in_row[UWB_MAS_PER_ZONE] = { - 8, 7, 6, 5, 4, 4, 4, 4, 4, 4, 4, 4, 4, 3, 2, 1, - }; - - rci->max_avail_safe = 0; - - for (mas = 0; mas < UWB_MAS_PER_ZONE; mas ++) { - if (!bm[column * UWB_NUM_ZONES + mas]) { - available++; - rci->max_avail_unsafe = available; - - rci->highest_mas[available] = mas; - - if (previous_avail) { - block_count++; - if ((block_count > safe_mas_in_row[start_block]) && - (!rci->max_avail_safe)) - rci->max_avail_safe = available - 1; - } else { - previous_avail = 1; - start_block = mas; - block_count = 1; - } - } else { - previous_avail = 0; - } - } - if (!rci->max_avail_safe) - rci->max_avail_safe = rci->max_avail_unsafe; -} - -static void get_column_descriptors(struct uwb_rsv_alloc_info *ai) -{ - unsigned char *bm = ai->bm; - struct uwb_rsv_col_info *ci = ai->ci; - int col; - - for (col = 1; col < UWB_NUM_ZONES; col++) { - uwb_rsv_fill_column_info(bm, col, &ci[col]); - } -} - -static int uwb_rsv_find_best_row_alloc(struct uwb_rsv_alloc_info *ai) -{ - int n_rows; - int max_rows = ai->max_mas / UWB_USABLE_MAS_PER_ROW; - int min_rows = ai->min_mas / UWB_USABLE_MAS_PER_ROW; - if (ai->min_mas % UWB_USABLE_MAS_PER_ROW) - min_rows++; - for (n_rows = max_rows; n_rows >= min_rows; n_rows--) { - if (n_rows <= ai->ri.free_rows) { - ai->ri.used_rows = n_rows; - ai->interval = 1; /* row reservation */ - uwb_rsv_fill_row_alloc(ai); - return UWB_RSV_ALLOC_FOUND; - } - } - return UWB_RSV_ALLOC_NOT_FOUND; -} - -static int uwb_rsv_find_best_col_alloc(struct uwb_rsv_alloc_info *ai, int interval) -{ - int n_safe, n_unsafe, n_mas; - int n_column = UWB_NUM_ZONES / interval; - int max_per_zone = ai->max_mas / n_column; - int min_per_zone = ai->min_mas / n_column; - - if (ai->min_mas % n_column) - min_per_zone++; - - if (min_per_zone > UWB_MAS_PER_ZONE) { - return UWB_RSV_ALLOC_NOT_FOUND; - } - - if (max_per_zone > UWB_MAS_PER_ZONE) { - max_per_zone = UWB_MAS_PER_ZONE; - } - - for (n_mas = max_per_zone; n_mas >= min_per_zone; n_mas--) { - if (uwb_rsv_find_best_column_set(ai, interval, 0, n_mas) == UWB_RSV_ALLOC_NOT_FOUND) - continue; - for (n_safe = n_mas; n_safe >= 0; n_safe--) { - n_unsafe = n_mas - n_safe; - if (uwb_rsv_find_best_column_set(ai, interval, n_safe, n_unsafe) == UWB_RSV_ALLOC_FOUND) { - uwb_rsv_fill_column_alloc(ai); - return UWB_RSV_ALLOC_FOUND; - } - } - } - return UWB_RSV_ALLOC_NOT_FOUND; -} - -int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv, struct uwb_mas_bm *available, - struct uwb_mas_bm *result) -{ - struct uwb_rsv_alloc_info *ai; - int interval; - int bit_index; - - ai = kzalloc(sizeof(struct uwb_rsv_alloc_info), GFP_KERNEL); - if (!ai) - return UWB_RSV_ALLOC_NOT_FOUND; - ai->min_mas = rsv->min_mas; - ai->max_mas = rsv->max_mas; - ai->max_interval = rsv->max_interval; - - - /* fill the not available vector from the available bm */ - for_each_clear_bit(bit_index, available->bm, UWB_NUM_MAS) - ai->bm[bit_index] = UWB_RSV_MAS_NOT_AVAIL; - - if (ai->max_interval == 1) { - get_row_descriptors(ai); - if (uwb_rsv_find_best_row_alloc(ai) == UWB_RSV_ALLOC_FOUND) - goto alloc_found; - else - goto alloc_not_found; - } - - get_column_descriptors(ai); - - for (interval = 16; interval >= 2; interval>>=1) { - if (interval > ai->max_interval) - continue; - if (uwb_rsv_find_best_col_alloc(ai, interval) == UWB_RSV_ALLOC_FOUND) - goto alloc_found; - } - - /* try row reservation if no column is found */ - get_row_descriptors(ai); - if (uwb_rsv_find_best_row_alloc(ai) == UWB_RSV_ALLOC_FOUND) - goto alloc_found; - else - goto alloc_not_found; - - alloc_found: - bitmap_zero(result->bm, UWB_NUM_MAS); - bitmap_zero(result->unsafe_bm, UWB_NUM_MAS); - /* fill the safe and unsafe bitmaps */ - for (bit_index = 0; bit_index < UWB_NUM_MAS; bit_index++) { - if (ai->bm[bit_index] == UWB_RSV_MAS_SAFE) - set_bit(bit_index, result->bm); - else if (ai->bm[bit_index] == UWB_RSV_MAS_UNSAFE) - set_bit(bit_index, result->unsafe_bm); - } - bitmap_or(result->bm, result->bm, result->unsafe_bm, UWB_NUM_MAS); - - result->safe = ai->safe_allocated_mases; - result->unsafe = ai->unsafe_allocated_mases; - - kfree(ai); - return UWB_RSV_ALLOC_FOUND; - - alloc_not_found: - kfree(ai); - return UWB_RSV_ALLOC_NOT_FOUND; -} diff --git a/drivers/staging/uwb/beacon.c b/drivers/staging/uwb/beacon.c deleted file mode 100644 index c483c19c5ef8..000000000000 --- a/drivers/staging/uwb/beacon.c +++ /dev/null @@ -1,595 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Beacon management - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/kdev_t.h> -#include <linux/slab.h> - -#include "uwb-internal.h" - -/* Start Beaconing command structure */ -struct uwb_rc_cmd_start_beacon { - struct uwb_rccb rccb; - __le16 wBPSTOffset; - u8 bChannelNumber; -} __attribute__((packed)); - - -static int uwb_rc_start_beacon(struct uwb_rc *rc, u16 bpst_offset, u8 channel) -{ - int result; - struct uwb_rc_cmd_start_beacon *cmd; - struct uwb_rc_evt_confirm reply; - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (cmd == NULL) - return -ENOMEM; - cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; - cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_START_BEACON); - cmd->wBPSTOffset = cpu_to_le16(bpst_offset); - cmd->bChannelNumber = channel; - reply.rceb.bEventType = UWB_RC_CET_GENERAL; - reply.rceb.wEvent = UWB_RC_CMD_START_BEACON; - result = uwb_rc_cmd(rc, "START-BEACON", &cmd->rccb, sizeof(*cmd), - &reply.rceb, sizeof(reply)); - if (result < 0) - goto error_cmd; - if (reply.bResultCode != UWB_RC_RES_SUCCESS) { - dev_err(&rc->uwb_dev.dev, - "START-BEACON: command execution failed: %s (%d)\n", - uwb_rc_strerror(reply.bResultCode), reply.bResultCode); - result = -EIO; - } -error_cmd: - kfree(cmd); - return result; -} - -static int uwb_rc_stop_beacon(struct uwb_rc *rc) -{ - int result; - struct uwb_rccb *cmd; - struct uwb_rc_evt_confirm reply; - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (cmd == NULL) - return -ENOMEM; - cmd->bCommandType = UWB_RC_CET_GENERAL; - cmd->wCommand = cpu_to_le16(UWB_RC_CMD_STOP_BEACON); - reply.rceb.bEventType = UWB_RC_CET_GENERAL; - reply.rceb.wEvent = UWB_RC_CMD_STOP_BEACON; - result = uwb_rc_cmd(rc, "STOP-BEACON", cmd, sizeof(*cmd), - &reply.rceb, sizeof(reply)); - if (result < 0) - goto error_cmd; - if (reply.bResultCode != UWB_RC_RES_SUCCESS) { - dev_err(&rc->uwb_dev.dev, - "STOP-BEACON: command execution failed: %s (%d)\n", - uwb_rc_strerror(reply.bResultCode), reply.bResultCode); - result = -EIO; - } -error_cmd: - kfree(cmd); - return result; -} - -/* - * Start/stop beacons - * - * @rc: UWB Radio Controller to operate on - * @channel: UWB channel on which to beacon (WUSB[table - * 5-12]). If -1, stop beaconing. - * @bpst_offset: Beacon Period Start Time offset; FIXME-do zero - * - * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB - * of a SET IE command after the device sent the first beacon that includes - * the IEs specified in the SET IE command. So, after we start beaconing we - * check if there is anything in the IE cache and call the SET IE command - * if needed. - */ -int uwb_rc_beacon(struct uwb_rc *rc, int channel, unsigned bpst_offset) -{ - int result; - struct device *dev = &rc->uwb_dev.dev; - - dev_dbg(dev, "%s: channel = %d\n", __func__, channel); - if (channel < 0) - channel = -1; - if (channel == -1) - result = uwb_rc_stop_beacon(rc); - else { - /* channel >= 0...dah */ - result = uwb_rc_start_beacon(rc, bpst_offset, channel); - if (result < 0) { - dev_err(dev, "Cannot start beaconing: %d\n", result); - return result; - } - if (le16_to_cpu(rc->ies->wIELength) > 0) { - result = uwb_rc_set_ie(rc, rc->ies); - if (result < 0) { - dev_err(dev, "Cannot set new IE on device: " - "%d\n", result); - result = uwb_rc_stop_beacon(rc); - channel = -1; - bpst_offset = 0; - } - } - } - - if (result >= 0) - rc->beaconing = channel; - return result; -} - -/* - * Beacon cache - * - * The purpose of this is to speed up the lookup of becon information - * when a new beacon arrives. The UWB Daemon uses it also to keep a - * tab of which devices are in radio distance and which not. When a - * device's beacon stays present for more than a certain amount of - * time, it is considered a new, usable device. When a beacon ceases - * to be received for a certain amount of time, it is considered that - * the device is gone. - * - * FIXME: use an allocator for the entries - * FIXME: use something faster for search than a list - */ - -void uwb_bce_kfree(struct kref *_bce) -{ - struct uwb_beca_e *bce = container_of(_bce, struct uwb_beca_e, refcnt); - - kfree(bce->be); - kfree(bce); -} - - -/* Find a beacon by dev addr in the cache */ -static -struct uwb_beca_e *__uwb_beca_find_bydev(struct uwb_rc *rc, - const struct uwb_dev_addr *dev_addr) -{ - struct uwb_beca_e *bce, *next; - list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) { - if (!memcmp(&bce->dev_addr, dev_addr, sizeof(bce->dev_addr))) - goto out; - } - bce = NULL; -out: - return bce; -} - -/* Find a beacon by dev addr in the cache */ -static -struct uwb_beca_e *__uwb_beca_find_bymac(struct uwb_rc *rc, - const struct uwb_mac_addr *mac_addr) -{ - struct uwb_beca_e *bce, *next; - list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) { - if (!memcmp(bce->mac_addr, mac_addr->data, - sizeof(struct uwb_mac_addr))) - goto out; - } - bce = NULL; -out: - return bce; -} - -/** - * uwb_dev_get_by_devaddr - get a UWB device with a specific DevAddr - * @rc: the radio controller that saw the device - * @devaddr: DevAddr of the UWB device to find - * - * There may be more than one matching device (in the case of a - * DevAddr conflict), but only the first one is returned. - */ -struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc, - const struct uwb_dev_addr *devaddr) -{ - struct uwb_dev *found = NULL; - struct uwb_beca_e *bce; - - mutex_lock(&rc->uwb_beca.mutex); - bce = __uwb_beca_find_bydev(rc, devaddr); - if (bce) - found = uwb_dev_try_get(rc, bce->uwb_dev); - mutex_unlock(&rc->uwb_beca.mutex); - - return found; -} - -/** - * uwb_dev_get_by_macaddr - get a UWB device with a specific EUI-48 - * @rc: the radio controller that saw the device - * @devaddr: EUI-48 of the UWB device to find - */ -struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc, - const struct uwb_mac_addr *macaddr) -{ - struct uwb_dev *found = NULL; - struct uwb_beca_e *bce; - - mutex_lock(&rc->uwb_beca.mutex); - bce = __uwb_beca_find_bymac(rc, macaddr); - if (bce) - found = uwb_dev_try_get(rc, bce->uwb_dev); - mutex_unlock(&rc->uwb_beca.mutex); - - return found; -} - -/* Initialize a beacon cache entry */ -static void uwb_beca_e_init(struct uwb_beca_e *bce) -{ - mutex_init(&bce->mutex); - kref_init(&bce->refcnt); - stats_init(&bce->lqe_stats); - stats_init(&bce->rssi_stats); -} - -/* - * Add a beacon to the cache - * - * @be: Beacon event information - * @bf: Beacon frame (part of b, really) - * @ts_jiffies: Timestamp (in jiffies) when the beacon was received - */ -static -struct uwb_beca_e *__uwb_beca_add(struct uwb_rc *rc, - struct uwb_rc_evt_beacon *be, - struct uwb_beacon_frame *bf, - unsigned long ts_jiffies) -{ - struct uwb_beca_e *bce; - - bce = kzalloc(sizeof(*bce), GFP_KERNEL); - if (bce == NULL) - return NULL; - uwb_beca_e_init(bce); - bce->ts_jiffies = ts_jiffies; - bce->uwb_dev = NULL; - list_add(&bce->node, &rc->uwb_beca.list); - return bce; -} - -/* - * Wipe out beacon entries that became stale - * - * Remove associated devicest too. - */ -void uwb_beca_purge(struct uwb_rc *rc) -{ - struct uwb_beca_e *bce, *next; - unsigned long expires; - - mutex_lock(&rc->uwb_beca.mutex); - list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) { - expires = bce->ts_jiffies + msecs_to_jiffies(beacon_timeout_ms); - if (time_after(jiffies, expires)) { - uwbd_dev_offair(bce); - } - } - mutex_unlock(&rc->uwb_beca.mutex); -} - -/* Clean up the whole beacon cache. Called on shutdown */ -void uwb_beca_release(struct uwb_rc *rc) -{ - struct uwb_beca_e *bce, *next; - - mutex_lock(&rc->uwb_beca.mutex); - list_for_each_entry_safe(bce, next, &rc->uwb_beca.list, node) { - list_del(&bce->node); - uwb_bce_put(bce); - } - mutex_unlock(&rc->uwb_beca.mutex); -} - -static void uwb_beacon_print(struct uwb_rc *rc, struct uwb_rc_evt_beacon *be, - struct uwb_beacon_frame *bf) -{ - char macbuf[UWB_ADDR_STRSIZE]; - char devbuf[UWB_ADDR_STRSIZE]; - char dstbuf[UWB_ADDR_STRSIZE]; - - uwb_mac_addr_print(macbuf, sizeof(macbuf), &bf->Device_Identifier); - uwb_dev_addr_print(devbuf, sizeof(devbuf), &bf->hdr.SrcAddr); - uwb_dev_addr_print(dstbuf, sizeof(dstbuf), &bf->hdr.DestAddr); - dev_info(&rc->uwb_dev.dev, - "BEACON from %s to %s (ch%u offset %u slot %u MAC %s)\n", - devbuf, dstbuf, be->bChannelNumber, be->wBPSTOffset, - bf->Beacon_Slot_Number, macbuf); -} - -/* - * @bce: beacon cache entry, referenced - */ -ssize_t uwb_bce_print_IEs(struct uwb_dev *uwb_dev, struct uwb_beca_e *bce, - char *buf, size_t size) -{ - ssize_t result = 0; - struct uwb_rc_evt_beacon *be; - struct uwb_beacon_frame *bf; - int ies_len; - struct uwb_ie_hdr *ies; - - mutex_lock(&bce->mutex); - - be = bce->be; - if (be) { - bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo; - ies_len = be->wBeaconInfoLength - sizeof(struct uwb_beacon_frame); - ies = (struct uwb_ie_hdr *)bf->IEData; - - result = uwb_ie_dump_hex(ies, ies_len, buf, size); - } - - mutex_unlock(&bce->mutex); - - return result; -} - -/* - * Verify that the beacon event, frame and IEs are ok - */ -static int uwb_verify_beacon(struct uwb_rc *rc, struct uwb_event *evt, - struct uwb_rc_evt_beacon *be) -{ - int result = -EINVAL; - struct uwb_beacon_frame *bf; - struct device *dev = &rc->uwb_dev.dev; - - /* Is there enough data to decode a beacon frame? */ - if (evt->notif.size < sizeof(*be) + sizeof(*bf)) { - dev_err(dev, "BEACON event: Not enough data to decode " - "(%zu vs %zu bytes needed)\n", evt->notif.size, - sizeof(*be) + sizeof(*bf)); - goto error; - } - /* FIXME: make sure beacon frame IEs are fine and that the whole thing - * is consistent */ - result = 0; -error: - return result; -} - -/* - * Handle UWB_RC_EVT_BEACON events - * - * We check the beacon cache to see how the received beacon fares. If - * is there already we refresh the timestamp. If not we create a new - * entry. - * - * According to the WHCI and WUSB specs, only one beacon frame is - * allowed per notification block, so we don't bother about scanning - * for more. - */ -int uwbd_evt_handle_rc_beacon(struct uwb_event *evt) -{ - int result = -EINVAL; - struct uwb_rc *rc; - struct uwb_rc_evt_beacon *be; - struct uwb_beacon_frame *bf; - struct uwb_beca_e *bce; - - rc = evt->rc; - be = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon, rceb); - result = uwb_verify_beacon(rc, evt, be); - if (result < 0) - return result; - - /* FIXME: handle alien beacons. */ - if (be->bBeaconType == UWB_RC_BEACON_TYPE_OL_ALIEN || - be->bBeaconType == UWB_RC_BEACON_TYPE_NOL_ALIEN) { - return -ENOSYS; - } - - bf = (struct uwb_beacon_frame *) be->BeaconInfo; - - /* - * Drop beacons from devices with a NULL EUI-48 -- they cannot - * be uniquely identified. - * - * It's expected that these will all be WUSB devices and they - * have a WUSB specific connection method so ignoring them - * here shouldn't be a problem. - */ - if (uwb_mac_addr_bcast(&bf->Device_Identifier)) - return 0; - - mutex_lock(&rc->uwb_beca.mutex); - bce = __uwb_beca_find_bymac(rc, &bf->Device_Identifier); - if (bce == NULL) { - /* Not in there, a new device is pinging */ - uwb_beacon_print(evt->rc, be, bf); - bce = __uwb_beca_add(rc, be, bf, evt->ts_jiffies); - if (bce == NULL) { - mutex_unlock(&rc->uwb_beca.mutex); - return -ENOMEM; - } - } - mutex_unlock(&rc->uwb_beca.mutex); - - mutex_lock(&bce->mutex); - /* purge old beacon data */ - kfree(bce->be); - - /* Update commonly used fields */ - bce->ts_jiffies = evt->ts_jiffies; - bce->be = be; - bce->dev_addr = bf->hdr.SrcAddr; - bce->mac_addr = &bf->Device_Identifier; - be->wBPSTOffset = le16_to_cpu(be->wBPSTOffset); - be->wBeaconInfoLength = le16_to_cpu(be->wBeaconInfoLength); - stats_add_sample(&bce->lqe_stats, be->bLQI - 7); - stats_add_sample(&bce->rssi_stats, be->bRSSI + 18); - - /* - * This might be a beacon from a new device. - */ - if (bce->uwb_dev == NULL) - uwbd_dev_onair(evt->rc, bce); - - mutex_unlock(&bce->mutex); - - return 1; /* we keep the event data */ -} - -/* - * Handle UWB_RC_EVT_BEACON_SIZE events - * - * XXXXX - */ -int uwbd_evt_handle_rc_beacon_size(struct uwb_event *evt) -{ - int result = -EINVAL; - struct device *dev = &evt->rc->uwb_dev.dev; - struct uwb_rc_evt_beacon_size *bs; - - /* Is there enough data to decode the event? */ - if (evt->notif.size < sizeof(*bs)) { - dev_err(dev, "BEACON SIZE notification: Not enough data to " - "decode (%zu vs %zu bytes needed)\n", - evt->notif.size, sizeof(*bs)); - goto error; - } - bs = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon_size, rceb); - if (0) - dev_info(dev, "Beacon size changed to %u bytes " - "(FIXME: action?)\n", le16_to_cpu(bs->wNewBeaconSize)); - else { - /* temporary hack until we do something with this message... */ - static unsigned count; - if (++count % 1000 == 0) - dev_info(dev, "Beacon size changed %u times " - "(FIXME: action?)\n", count); - } - result = 0; -error: - return result; -} - -/** - * uwbd_evt_handle_rc_bp_slot_change - handle a BP_SLOT_CHANGE event - * @evt: the BP_SLOT_CHANGE notification from the radio controller - * - * If the event indicates that no beacon period slots were available - * then radio controller has transitioned to a non-beaconing state. - * Otherwise, simply save the current beacon slot. - */ -int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *evt) -{ - struct uwb_rc *rc = evt->rc; - struct device *dev = &rc->uwb_dev.dev; - struct uwb_rc_evt_bp_slot_change *bpsc; - - if (evt->notif.size < sizeof(*bpsc)) { - dev_err(dev, "BP SLOT CHANGE event: Not enough data\n"); - return -EINVAL; - } - bpsc = container_of(evt->notif.rceb, struct uwb_rc_evt_bp_slot_change, rceb); - - if (uwb_rc_evt_bp_slot_change_no_slot(bpsc)) { - dev_err(dev, "stopped beaconing: No free slots in BP\n"); - mutex_lock(&rc->uwb_dev.mutex); - rc->beaconing = -1; - mutex_unlock(&rc->uwb_dev.mutex); - } else - rc->uwb_dev.beacon_slot = uwb_rc_evt_bp_slot_change_slot_num(bpsc); - - return 0; -} - -/** - * Handle UWB_RC_EVT_BPOIE_CHANGE events - * - * XXXXX - */ -struct uwb_ie_bpo { - struct uwb_ie_hdr hdr; - u8 bp_length; - u8 data[]; -} __attribute__((packed)); - -int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *evt) -{ - int result = -EINVAL; - struct device *dev = &evt->rc->uwb_dev.dev; - struct uwb_rc_evt_bpoie_change *bpoiec; - struct uwb_ie_bpo *bpoie; - static unsigned count; /* FIXME: this is a temp hack */ - size_t iesize; - - /* Is there enough data to decode it? */ - if (evt->notif.size < sizeof(*bpoiec)) { - dev_err(dev, "BPOIEC notification: Not enough data to " - "decode (%zu vs %zu bytes needed)\n", - evt->notif.size, sizeof(*bpoiec)); - goto error; - } - bpoiec = container_of(evt->notif.rceb, struct uwb_rc_evt_bpoie_change, rceb); - iesize = le16_to_cpu(bpoiec->wBPOIELength); - if (iesize < sizeof(*bpoie)) { - dev_err(dev, "BPOIEC notification: Not enough IE data to " - "decode (%zu vs %zu bytes needed)\n", - iesize, sizeof(*bpoie)); - goto error; - } - if (++count % 1000 == 0) /* Lame placeholder */ - dev_info(dev, "BPOIE: %u changes received\n", count); - /* - * FIXME: At this point we should go over all the IEs in the - * bpoiec->BPOIE array and act on each. - */ - result = 0; -error: - return result; -} - -/* - * Print beaconing state. - */ -static ssize_t uwb_rc_beacon_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_rc *rc = uwb_dev->rc; - ssize_t result; - - mutex_lock(&rc->uwb_dev.mutex); - result = sprintf(buf, "%d\n", rc->beaconing); - mutex_unlock(&rc->uwb_dev.mutex); - return result; -} - -/* - * Start beaconing on the specified channel, or stop beaconing. - */ -static ssize_t uwb_rc_beacon_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_rc *rc = uwb_dev->rc; - int channel; - ssize_t result = -EINVAL; - - result = sscanf(buf, "%d", &channel); - if (result >= 1) - result = uwb_radio_force_channel(rc, channel); - - return result < 0 ? result : size; -} -DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, uwb_rc_beacon_show, uwb_rc_beacon_store); diff --git a/drivers/staging/uwb/driver.c b/drivers/staging/uwb/driver.c deleted file mode 100644 index 5755c2e49ffc..000000000000 --- a/drivers/staging/uwb/driver.c +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Driver initialization, etc - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - * - * Life cycle: FIXME: explain - * - * UWB radio controller: - * - * 1. alloc a uwb_rc, zero it - * 2. call uwb_rc_init() on it to set it up + ops (won't do any - * kind of allocation) - * 3. register (now it is owned by the UWB stack--deregister before - * freeing/destroying). - * 4. It lives on it's own now (UWB stack handles)--when it - * disconnects, call unregister() - * 5. free it. - * - * Make sure you have a reference to the uwb_rc before calling - * any of the UWB API functions. - * - * TODO: - * - * 1. Locking and life cycle management is crappy still. All entry - * points to the UWB HCD API assume you have a reference on the - * uwb_rc structure and that it won't go away. They mutex lock it - * before doing anything. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/kdev_t.h> -#include <linux/random.h> - -#include "uwb-internal.h" - - -/* UWB stack attributes (or 'global' constants) */ - - -/** - * If a beacon disappears for longer than this, then we consider the - * device who was represented by that beacon to be gone. - * - * ECMA-368[17.2.3, last para] establishes that a device must not - * consider a device to be its neighbour if he doesn't receive a beacon - * for more than mMaxLostBeacons. mMaxLostBeacons is defined in - * ECMA-368[17.16] as 3; because we can get only one beacon per - * superframe, that'd be 3 * 65ms = 195 ~ 200 ms. Let's give it time - * for jitter and stuff and make it 500 ms. - */ -unsigned long beacon_timeout_ms = 500; - -static -ssize_t beacon_timeout_ms_show(struct class *class, - struct class_attribute *attr, - char *buf) -{ - return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms); -} - -static -ssize_t beacon_timeout_ms_store(struct class *class, - struct class_attribute *attr, - const char *buf, size_t size) -{ - unsigned long bt; - ssize_t result; - result = sscanf(buf, "%lu", &bt); - if (result != 1) - return -EINVAL; - beacon_timeout_ms = bt; - return size; -} -static CLASS_ATTR_RW(beacon_timeout_ms); - -static struct attribute *uwb_class_attrs[] = { - &class_attr_beacon_timeout_ms.attr, - NULL, -}; -ATTRIBUTE_GROUPS(uwb_class); - -/** Device model classes */ -struct class uwb_rc_class = { - .name = "uwb_rc", - .class_groups = uwb_class_groups, -}; - - -static int __init uwb_subsys_init(void) -{ - int result = 0; - - result = uwb_est_create(); - if (result < 0) { - printk(KERN_ERR "uwb: Can't initialize EST subsystem\n"); - goto error_est_init; - } - - result = class_register(&uwb_rc_class); - if (result < 0) - goto error_uwb_rc_class_register; - - /* Register the UWB bus */ - result = bus_register(&uwb_bus_type); - if (result) { - pr_err("%s - registering bus driver failed\n", __func__); - goto exit_bus; - } - - uwb_dbg_init(); - return 0; - -exit_bus: - class_unregister(&uwb_rc_class); -error_uwb_rc_class_register: - uwb_est_destroy(); -error_est_init: - return result; -} -module_init(uwb_subsys_init); - -static void __exit uwb_subsys_exit(void) -{ - uwb_dbg_exit(); - bus_unregister(&uwb_bus_type); - class_unregister(&uwb_rc_class); - uwb_est_destroy(); - return; -} -module_exit(uwb_subsys_exit); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Ultra Wide Band core"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/uwb/drp-avail.c b/drivers/staging/uwb/drp-avail.c deleted file mode 100644 index 02392ab82a7d..000000000000 --- a/drivers/staging/uwb/drp-avail.c +++ /dev/null @@ -1,278 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * DRP availability management - * - * Copyright (C) 2005-2006 Intel Corporation - * Reinette Chatre <reinette.chatre@intel.com> - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - * - * Manage DRP Availability (the MAS available for DRP - * reservations). Thus: - * - * - Handle DRP Availability Change notifications - * - * - Allow the reservation manager to indicate MAS reserved/released - * by local (owned by/targeted at the radio controller) - * reservations. - * - * - Based on the two sources above, generate a DRP Availability IE to - * be included in the beacon. - * - * See also the documentation for struct uwb_drp_avail. - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/bitmap.h> -#include "uwb-internal.h" - -/** - * uwb_drp_avail_init - initialize an RC's MAS availability - * - * All MAS are available initially. The RC will inform use which - * slots are used for the BP (it may change in size). - */ -void uwb_drp_avail_init(struct uwb_rc *rc) -{ - bitmap_fill(rc->drp_avail.global, UWB_NUM_MAS); - bitmap_fill(rc->drp_avail.local, UWB_NUM_MAS); - bitmap_fill(rc->drp_avail.pending, UWB_NUM_MAS); -} - -/* - * Determine MAS available for new local reservations. - * - * avail = global & local & pending - */ -void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail) -{ - bitmap_and(avail->bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS); - bitmap_and(avail->bm, avail->bm, rc->drp_avail.pending, UWB_NUM_MAS); -} - -/** - * uwb_drp_avail_reserve_pending - reserve MAS for a new reservation - * @rc: the radio controller - * @mas: the MAS to reserve - * - * Returns 0 on success, or -EBUSY if the MAS requested aren't available. - */ -int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas) -{ - struct uwb_mas_bm avail; - - uwb_drp_available(rc, &avail); - if (!bitmap_subset(mas->bm, avail.bm, UWB_NUM_MAS)) - return -EBUSY; - - bitmap_andnot(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS); - return 0; -} - -/** - * uwb_drp_avail_reserve - reserve MAS for an established reservation - * @rc: the radio controller - * @mas: the MAS to reserve - */ -void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas) -{ - bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS); - bitmap_andnot(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS); - rc->drp_avail.ie_valid = false; -} - -/** - * uwb_drp_avail_release - release MAS from a pending or established reservation - * @rc: the radio controller - * @mas: the MAS to release - */ -void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas) -{ - bitmap_or(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS); - bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS); - rc->drp_avail.ie_valid = false; - uwb_rsv_handle_drp_avail_change(rc); -} - -/** - * uwb_drp_avail_ie_update - update the DRP Availability IE - * @rc: the radio controller - * - * avail = global & local - */ -void uwb_drp_avail_ie_update(struct uwb_rc *rc) -{ - struct uwb_mas_bm avail; - - bitmap_and(avail.bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS); - - rc->drp_avail.ie.hdr.element_id = UWB_IE_DRP_AVAILABILITY; - rc->drp_avail.ie.hdr.length = UWB_NUM_MAS / 8; - uwb_mas_bm_copy_le(rc->drp_avail.ie.bmp, &avail); - rc->drp_avail.ie_valid = true; -} - -/** - * Create an unsigned long from a buffer containing a byte stream. - * - * @array: pointer to buffer - * @itr: index of buffer from where we start - * @len: the buffer's remaining size may not be exact multiple of - * sizeof(unsigned long), @len is the length of buffer that needs - * to be converted. This will be sizeof(unsigned long) or smaller - * (BUG if not). If it is smaller then we will pad the remaining - * space of the result with zeroes. - */ -static -unsigned long get_val(u8 *array, size_t itr, size_t len) -{ - unsigned long val = 0; - size_t top = itr + len; - - BUG_ON(len > sizeof(val)); - - while (itr < top) { - val <<= 8; - val |= array[top - 1]; - top--; - } - val <<= 8 * (sizeof(val) - len); /* padding */ - return val; -} - -/** - * Initialize bitmap from data buffer. - * - * The bitmap to be converted could come from a IE, for example a - * DRP Availability IE. - * From ECMA-368 1.0 [16.8.7]: " - * octets: 1 1 N * (0 to 32) - * Element ID Length (=N) DRP Availability Bitmap - * - * The DRP Availability Bitmap field is up to 256 bits long, one - * bit for each MAS in the superframe, where the least-significant - * bit of the field corresponds to the first MAS in the superframe - * and successive bits correspond to successive MASs." - * - * The DRP Availability bitmap is in octets from 0 to 32, so octet - * 32 contains bits for MAS 1-8, etc. If the bitmap is smaller than 32 - * octets, the bits in octets not included at the end of the bitmap are - * treated as zero. In this case (when the bitmap is smaller than 32 - * octets) the MAS represented range from MAS 1 to MAS (size of bitmap) - * with the last octet still containing bits for MAS 1-8, etc. - * - * For example: - * F00F0102 03040506 0708090A 0B0C0D0E 0F010203 - * ^^^^ - * |||| - * |||| - * |||\LSB of byte is MAS 9 - * ||\MSB of byte is MAS 16 - * |\LSB of first byte is MAS 1 - * \ MSB of byte is MAS 8 - * - * An example of this encoding can be found in ECMA-368 Annex-D [Table D.11] - * - * The resulting bitmap will have the following mapping: - * bit position 0 == MAS 1 - * bit position 1 == MAS 2 - * ... - * bit position (UWB_NUM_MAS - 1) == MAS UWB_NUM_MAS - * - * @bmp_itr: pointer to bitmap (can be declared with DECLARE_BITMAP) - * @buffer: pointer to buffer containing bitmap data in big endian - * format (MSB first) - * @buffer_size:number of bytes with which bitmap should be initialized - */ -static -void buffer_to_bmp(unsigned long *bmp_itr, void *_buffer, - size_t buffer_size) -{ - u8 *buffer = _buffer; - size_t itr, len; - unsigned long val; - - itr = 0; - while (itr < buffer_size) { - len = buffer_size - itr >= sizeof(val) ? - sizeof(val) : buffer_size - itr; - val = get_val(buffer, itr, len); - bmp_itr[itr / sizeof(val)] = val; - itr += sizeof(val); - } -} - - -/** - * Extract DRP Availability bitmap from the notification. - * - * The notification that comes in contains a bitmap of (UWB_NUM_MAS / 8) bytes - * We convert that to our internal representation. - */ -static -int uwbd_evt_get_drp_avail(struct uwb_event *evt, unsigned long *bmp) -{ - struct device *dev = &evt->rc->uwb_dev.dev; - struct uwb_rc_evt_drp_avail *drp_evt; - int result = -EINVAL; - - /* Is there enough data to decode the event? */ - if (evt->notif.size < sizeof(*drp_evt)) { - dev_err(dev, "DRP Availability Change: Not enough " - "data to decode event [%zu bytes, %zu " - "needed]\n", evt->notif.size, sizeof(*drp_evt)); - goto error; - } - drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp_avail, rceb); - buffer_to_bmp(bmp, drp_evt->bmp, UWB_NUM_MAS/8); - result = 0; -error: - return result; -} - - -/** - * Process an incoming DRP Availability notification. - * - * @evt: Event information (packs the actual event data, which - * radio controller it came to, etc). - * - * @returns: 0 on success (so uwbd() frees the event buffer), < 0 - * on error. - * - * According to ECMA-368 1.0 [16.8.7], bits set to ONE indicate that - * the MAS slot is available, bits set to ZERO indicate that the slot - * is busy. - * - * So we clear available slots, we set used slots :) - * - * The notification only marks non-availability based on the BP and - * received DRP IEs that are not for this radio controller. A copy of - * this bitmap is needed to generate the real availability (which - * includes local and pending reservations). - * - * The DRP Availability IE that this radio controller emits will need - * to be updated. - */ -int uwbd_evt_handle_rc_drp_avail(struct uwb_event *evt) -{ - int result; - struct uwb_rc *rc = evt->rc; - DECLARE_BITMAP(bmp, UWB_NUM_MAS); - - result = uwbd_evt_get_drp_avail(evt, bmp); - if (result < 0) - return result; - - mutex_lock(&rc->rsvs_mutex); - bitmap_copy(rc->drp_avail.global, bmp, UWB_NUM_MAS); - rc->drp_avail.ie_valid = false; - uwb_rsv_handle_drp_avail_change(rc); - mutex_unlock(&rc->rsvs_mutex); - - uwb_rsv_sched_update(rc); - - return 0; -} diff --git a/drivers/staging/uwb/drp-ie.c b/drivers/staging/uwb/drp-ie.c deleted file mode 100644 index b2a862cf76de..000000000000 --- a/drivers/staging/uwb/drp-ie.c +++ /dev/null @@ -1,305 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * UWB DRP IE management. - * - * Copyright (C) 2005-2006 Intel Corporation - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/random.h> -#include <linux/slab.h> - -#include "uwb.h" -#include "uwb-internal.h" - - -/* - * Return the reason code for a reservations's DRP IE. - */ -static int uwb_rsv_reason_code(struct uwb_rsv *rsv) -{ - static const int reason_codes[] = { - [UWB_RSV_STATE_O_INITIATED] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_O_PENDING] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_O_MODIFIED] = UWB_DRP_REASON_MODIFIED, - [UWB_RSV_STATE_O_ESTABLISHED] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_O_TO_BE_MOVED] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_O_MOVE_COMBINING] = UWB_DRP_REASON_MODIFIED, - [UWB_RSV_STATE_O_MOVE_REDUCING] = UWB_DRP_REASON_MODIFIED, - [UWB_RSV_STATE_O_MOVE_EXPANDING] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_T_ACCEPTED] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_T_CONFLICT] = UWB_DRP_REASON_CONFLICT, - [UWB_RSV_STATE_T_PENDING] = UWB_DRP_REASON_PENDING, - [UWB_RSV_STATE_T_DENIED] = UWB_DRP_REASON_DENIED, - [UWB_RSV_STATE_T_RESIZED] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = UWB_DRP_REASON_CONFLICT, - [UWB_RSV_STATE_T_EXPANDING_PENDING] = UWB_DRP_REASON_PENDING, - [UWB_RSV_STATE_T_EXPANDING_DENIED] = UWB_DRP_REASON_DENIED, - }; - - return reason_codes[rsv->state]; -} - -/* - * Return the reason code for a reservations's companion DRP IE . - */ -static int uwb_rsv_companion_reason_code(struct uwb_rsv *rsv) -{ - static const int companion_reason_codes[] = { - [UWB_RSV_STATE_O_MOVE_EXPANDING] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = UWB_DRP_REASON_ACCEPTED, - [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = UWB_DRP_REASON_CONFLICT, - [UWB_RSV_STATE_T_EXPANDING_PENDING] = UWB_DRP_REASON_PENDING, - [UWB_RSV_STATE_T_EXPANDING_DENIED] = UWB_DRP_REASON_DENIED, - }; - - return companion_reason_codes[rsv->state]; -} - -/* - * Return the status bit for a reservations's DRP IE. - */ -int uwb_rsv_status(struct uwb_rsv *rsv) -{ - static const int statuses[] = { - [UWB_RSV_STATE_O_INITIATED] = 0, - [UWB_RSV_STATE_O_PENDING] = 0, - [UWB_RSV_STATE_O_MODIFIED] = 1, - [UWB_RSV_STATE_O_ESTABLISHED] = 1, - [UWB_RSV_STATE_O_TO_BE_MOVED] = 0, - [UWB_RSV_STATE_O_MOVE_COMBINING] = 1, - [UWB_RSV_STATE_O_MOVE_REDUCING] = 1, - [UWB_RSV_STATE_O_MOVE_EXPANDING] = 1, - [UWB_RSV_STATE_T_ACCEPTED] = 1, - [UWB_RSV_STATE_T_CONFLICT] = 0, - [UWB_RSV_STATE_T_PENDING] = 0, - [UWB_RSV_STATE_T_DENIED] = 0, - [UWB_RSV_STATE_T_RESIZED] = 1, - [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = 1, - [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = 1, - [UWB_RSV_STATE_T_EXPANDING_PENDING] = 1, - [UWB_RSV_STATE_T_EXPANDING_DENIED] = 1, - - }; - - return statuses[rsv->state]; -} - -/* - * Return the status bit for a reservations's companion DRP IE . - */ -int uwb_rsv_companion_status(struct uwb_rsv *rsv) -{ - static const int companion_statuses[] = { - [UWB_RSV_STATE_O_MOVE_EXPANDING] = 0, - [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = 1, - [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = 0, - [UWB_RSV_STATE_T_EXPANDING_PENDING] = 0, - [UWB_RSV_STATE_T_EXPANDING_DENIED] = 0, - }; - - return companion_statuses[rsv->state]; -} - -/* - * Allocate a DRP IE. - * - * To save having to free/allocate a DRP IE when its MAS changes, - * enough memory is allocated for the maxiumum number of DRP - * allocation fields. This gives an overhead per reservation of up to - * (UWB_NUM_ZONES - 1) * 4 = 60 octets. - */ -static struct uwb_ie_drp *uwb_drp_ie_alloc(void) -{ - struct uwb_ie_drp *drp_ie; - - drp_ie = kzalloc(struct_size(drp_ie, allocs, UWB_NUM_ZONES), - GFP_KERNEL); - if (drp_ie) - drp_ie->hdr.element_id = UWB_IE_DRP; - return drp_ie; -} - - -/* - * Fill a DRP IE's allocation fields from a MAS bitmap. - */ -static void uwb_drp_ie_from_bm(struct uwb_ie_drp *drp_ie, - struct uwb_mas_bm *mas) -{ - int z, i, num_fields = 0, next = 0; - struct uwb_drp_alloc *zones; - __le16 current_bmp; - DECLARE_BITMAP(tmp_bmp, UWB_NUM_MAS); - DECLARE_BITMAP(tmp_mas_bm, UWB_MAS_PER_ZONE); - - zones = drp_ie->allocs; - - bitmap_copy(tmp_bmp, mas->bm, UWB_NUM_MAS); - - /* Determine unique MAS bitmaps in zones from bitmap. */ - for (z = 0; z < UWB_NUM_ZONES; z++) { - bitmap_copy(tmp_mas_bm, tmp_bmp, UWB_MAS_PER_ZONE); - if (bitmap_weight(tmp_mas_bm, UWB_MAS_PER_ZONE) > 0) { - bool found = false; - current_bmp = (__le16) *tmp_mas_bm; - for (i = 0; i < next; i++) { - if (current_bmp == zones[i].mas_bm) { - zones[i].zone_bm |= 1 << z; - found = true; - break; - } - } - if (!found) { - num_fields++; - zones[next].zone_bm = 1 << z; - zones[next].mas_bm = current_bmp; - next++; - } - } - bitmap_shift_right(tmp_bmp, tmp_bmp, UWB_MAS_PER_ZONE, UWB_NUM_MAS); - } - - /* Store in format ready for transmission (le16). */ - for (i = 0; i < num_fields; i++) { - drp_ie->allocs[i].zone_bm = cpu_to_le16(zones[i].zone_bm); - drp_ie->allocs[i].mas_bm = cpu_to_le16(zones[i].mas_bm); - } - - drp_ie->hdr.length = sizeof(struct uwb_ie_drp) - sizeof(struct uwb_ie_hdr) - + num_fields * sizeof(struct uwb_drp_alloc); -} - -/** - * uwb_drp_ie_update - update a reservation's DRP IE - * @rsv: the reservation - */ -int uwb_drp_ie_update(struct uwb_rsv *rsv) -{ - struct uwb_ie_drp *drp_ie; - struct uwb_rsv_move *mv; - int unsafe; - - if (rsv->state == UWB_RSV_STATE_NONE) { - kfree(rsv->drp_ie); - rsv->drp_ie = NULL; - return 0; - } - - unsafe = rsv->mas.unsafe ? 1 : 0; - - if (rsv->drp_ie == NULL) { - rsv->drp_ie = uwb_drp_ie_alloc(); - if (rsv->drp_ie == NULL) - return -ENOMEM; - } - drp_ie = rsv->drp_ie; - - uwb_ie_drp_set_unsafe(drp_ie, unsafe); - uwb_ie_drp_set_tiebreaker(drp_ie, rsv->tiebreaker); - uwb_ie_drp_set_owner(drp_ie, uwb_rsv_is_owner(rsv)); - uwb_ie_drp_set_status(drp_ie, uwb_rsv_status(rsv)); - uwb_ie_drp_set_reason_code(drp_ie, uwb_rsv_reason_code(rsv)); - uwb_ie_drp_set_stream_index(drp_ie, rsv->stream); - uwb_ie_drp_set_type(drp_ie, rsv->type); - - if (uwb_rsv_is_owner(rsv)) { - switch (rsv->target.type) { - case UWB_RSV_TARGET_DEV: - drp_ie->dev_addr = rsv->target.dev->dev_addr; - break; - case UWB_RSV_TARGET_DEVADDR: - drp_ie->dev_addr = rsv->target.devaddr; - break; - } - } else - drp_ie->dev_addr = rsv->owner->dev_addr; - - uwb_drp_ie_from_bm(drp_ie, &rsv->mas); - - if (uwb_rsv_has_two_drp_ies(rsv)) { - mv = &rsv->mv; - if (mv->companion_drp_ie == NULL) { - mv->companion_drp_ie = uwb_drp_ie_alloc(); - if (mv->companion_drp_ie == NULL) - return -ENOMEM; - } - drp_ie = mv->companion_drp_ie; - - /* keep all the same configuration of the main drp_ie */ - memcpy(drp_ie, rsv->drp_ie, sizeof(struct uwb_ie_drp)); - - - /* FIXME: handle properly the unsafe bit */ - uwb_ie_drp_set_unsafe(drp_ie, 1); - uwb_ie_drp_set_status(drp_ie, uwb_rsv_companion_status(rsv)); - uwb_ie_drp_set_reason_code(drp_ie, uwb_rsv_companion_reason_code(rsv)); - - uwb_drp_ie_from_bm(drp_ie, &mv->companion_mas); - } - - rsv->ie_valid = true; - return 0; -} - -/* - * Set MAS bits from given MAS bitmap in a single zone of large bitmap. - * - * We are given a zone id and the MAS bitmap of bits that need to be set in - * this zone. Note that this zone may already have bits set and this only - * adds settings - we cannot simply assign the MAS bitmap contents to the - * zone contents. We iterate over the the bits (MAS) in the zone and set the - * bits that are set in the given MAS bitmap. - */ -static -void uwb_drp_ie_single_zone_to_bm(struct uwb_mas_bm *bm, u8 zone, u16 mas_bm) -{ - int mas; - u16 mas_mask; - - for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++) { - mas_mask = 1 << mas; - if (mas_bm & mas_mask) - set_bit(zone * UWB_NUM_ZONES + mas, bm->bm); - } -} - -/** - * uwb_drp_ie_zones_to_bm - convert DRP allocation fields to a bitmap - * @mas: MAS bitmap that will be populated to correspond to the - * allocation fields in the DRP IE - * @drp_ie: the DRP IE that contains the allocation fields. - * - * The input format is an array of MAS allocation fields (16 bit Zone - * bitmap, 16 bit MAS bitmap) as described in [ECMA-368] section - * 16.8.6. The output is a full 256 bit MAS bitmap. - * - * We go over all the allocation fields, for each allocation field we - * know which zones are impacted. We iterate over all the zones - * impacted and call a function that will set the correct MAS bits in - * each zone. - */ -void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie) -{ - int numallocs = (drp_ie->hdr.length - 4) / 4; - const struct uwb_drp_alloc *alloc; - int cnt; - u16 zone_bm, mas_bm; - u8 zone; - u16 zone_mask; - - bitmap_zero(bm->bm, UWB_NUM_MAS); - - for (cnt = 0; cnt < numallocs; cnt++) { - alloc = &drp_ie->allocs[cnt]; - zone_bm = le16_to_cpu(alloc->zone_bm); - mas_bm = le16_to_cpu(alloc->mas_bm); - for (zone = 0; zone < UWB_NUM_ZONES; zone++) { - zone_mask = 1 << zone; - if (zone_bm & zone_mask) - uwb_drp_ie_single_zone_to_bm(bm, zone, mas_bm); - } - } -} - diff --git a/drivers/staging/uwb/drp.c b/drivers/staging/uwb/drp.c deleted file mode 100644 index 869987bede7b..000000000000 --- a/drivers/staging/uwb/drp.c +++ /dev/null @@ -1,842 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Dynamic Reservation Protocol handling - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include <linux/kthread.h> -#include <linux/freezer.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include "uwb-internal.h" - - -/* DRP Conflict Actions ([ECMA-368 2nd Edition] 17.4.6) */ -enum uwb_drp_conflict_action { - /* Reservation is maintained, no action needed */ - UWB_DRP_CONFLICT_MANTAIN = 0, - - /* the device shall not transmit frames in conflicting MASs in - * the following superframe. If the device is the reservation - * target, it shall also set the Reason Code in its DRP IE to - * Conflict in its beacon in the following superframe. - */ - UWB_DRP_CONFLICT_ACT1, - - /* the device shall not set the Reservation Status bit to ONE - * and shall not transmit frames in conflicting MASs. If the - * device is the reservation target, it shall also set the - * Reason Code in its DRP IE to Conflict. - */ - UWB_DRP_CONFLICT_ACT2, - - /* the device shall not transmit frames in conflicting MASs in - * the following superframe. It shall remove the conflicting - * MASs from the reservation or set the Reservation Status to - * ZERO in its beacon in the following superframe. If the - * device is the reservation target, it shall also set the - * Reason Code in its DRP IE to Conflict. - */ - UWB_DRP_CONFLICT_ACT3, -}; - - -static void uwb_rc_set_drp_cmd_done(struct uwb_rc *rc, void *arg, - struct uwb_rceb *reply, ssize_t reply_size) -{ - struct uwb_rc_evt_set_drp_ie *r = (struct uwb_rc_evt_set_drp_ie *)reply; - unsigned long flags; - - if (r != NULL) { - if (r->bResultCode != UWB_RC_RES_SUCCESS) - dev_err(&rc->uwb_dev.dev, "SET-DRP-IE failed: %s (%d)\n", - uwb_rc_strerror(r->bResultCode), r->bResultCode); - } else - dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n"); - - spin_lock_irqsave(&rc->rsvs_lock, flags); - if (rc->set_drp_ie_pending > 1) { - rc->set_drp_ie_pending = 0; - uwb_rsv_queue_update(rc); - } else { - rc->set_drp_ie_pending = 0; - } - spin_unlock_irqrestore(&rc->rsvs_lock, flags); -} - -/** - * Construct and send the SET DRP IE - * - * @rc: UWB Host controller - * @returns: >= 0 number of bytes still available in the beacon - * < 0 errno code on error. - * - * See WUSB[8.6.2.7]: The host must set all the DRP IEs that it wants the - * device to include in its beacon at the same time. We thus have to - * traverse all reservations and include the DRP IEs of all PENDING - * and NEGOTIATED reservations in a SET DRP command for transmission. - * - * A DRP Availability IE is appended. - * - * rc->rsvs_mutex is held - * - * FIXME We currently ignore the returned value indicating the remaining space - * in beacon. This could be used to deny reservation requests earlier if - * determined that they would cause the beacon space to be exceeded. - */ -int uwb_rc_send_all_drp_ie(struct uwb_rc *rc) -{ - int result; - struct uwb_rc_cmd_set_drp_ie *cmd; - struct uwb_rsv *rsv; - struct uwb_rsv_move *mv; - int num_bytes = 0; - u8 *IEDataptr; - - result = -ENOMEM; - /* First traverse all reservations to determine memory needed. */ - list_for_each_entry(rsv, &rc->reservations, rc_node) { - if (rsv->drp_ie != NULL) { - num_bytes += rsv->drp_ie->hdr.length + 2; - if (uwb_rsv_has_two_drp_ies(rsv) && - (rsv->mv.companion_drp_ie != NULL)) { - mv = &rsv->mv; - num_bytes += - mv->companion_drp_ie->hdr.length + 2; - } - } - } - num_bytes += sizeof(rc->drp_avail.ie); - cmd = kzalloc(sizeof(*cmd) + num_bytes, GFP_KERNEL); - if (cmd == NULL) - goto error; - cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; - cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_DRP_IE); - cmd->wIELength = num_bytes; - IEDataptr = (u8 *)&cmd->IEData[0]; - - /* FIXME: DRV avail IE is not always needed */ - /* put DRP avail IE first */ - memcpy(IEDataptr, &rc->drp_avail.ie, sizeof(rc->drp_avail.ie)); - IEDataptr += sizeof(struct uwb_ie_drp_avail); - - /* Next traverse all reservations to place IEs in allocated memory. */ - list_for_each_entry(rsv, &rc->reservations, rc_node) { - if (rsv->drp_ie != NULL) { - memcpy(IEDataptr, rsv->drp_ie, - rsv->drp_ie->hdr.length + 2); - IEDataptr += rsv->drp_ie->hdr.length + 2; - - if (uwb_rsv_has_two_drp_ies(rsv) && - (rsv->mv.companion_drp_ie != NULL)) { - mv = &rsv->mv; - memcpy(IEDataptr, mv->companion_drp_ie, - mv->companion_drp_ie->hdr.length + 2); - IEDataptr += - mv->companion_drp_ie->hdr.length + 2; - } - } - } - - result = uwb_rc_cmd_async(rc, "SET-DRP-IE", - &cmd->rccb, sizeof(*cmd) + num_bytes, - UWB_RC_CET_GENERAL, UWB_RC_CMD_SET_DRP_IE, - uwb_rc_set_drp_cmd_done, NULL); - - rc->set_drp_ie_pending = 1; - - kfree(cmd); -error: - return result; -} - -/* - * Evaluate the action to perform using conflict resolution rules - * - * Return a uwb_drp_conflict_action. - */ -static int evaluate_conflict_action(struct uwb_ie_drp *ext_drp_ie, int ext_beacon_slot, - struct uwb_rsv *rsv, int our_status) -{ - int our_tie_breaker = rsv->tiebreaker; - int our_type = rsv->type; - int our_beacon_slot = rsv->rc->uwb_dev.beacon_slot; - - int ext_tie_breaker = uwb_ie_drp_tiebreaker(ext_drp_ie); - int ext_status = uwb_ie_drp_status(ext_drp_ie); - int ext_type = uwb_ie_drp_type(ext_drp_ie); - - - /* [ECMA-368 2nd Edition] 17.4.6 */ - if (ext_type == UWB_DRP_TYPE_PCA && our_type == UWB_DRP_TYPE_PCA) { - return UWB_DRP_CONFLICT_MANTAIN; - } - - /* [ECMA-368 2nd Edition] 17.4.6-1 */ - if (our_type == UWB_DRP_TYPE_ALIEN_BP) { - return UWB_DRP_CONFLICT_MANTAIN; - } - - /* [ECMA-368 2nd Edition] 17.4.6-2 */ - if (ext_type == UWB_DRP_TYPE_ALIEN_BP) { - /* here we know our_type != UWB_DRP_TYPE_ALIEN_BP */ - return UWB_DRP_CONFLICT_ACT1; - } - - /* [ECMA-368 2nd Edition] 17.4.6-3 */ - if (our_status == 0 && ext_status == 1) { - return UWB_DRP_CONFLICT_ACT2; - } - - /* [ECMA-368 2nd Edition] 17.4.6-4 */ - if (our_status == 1 && ext_status == 0) { - return UWB_DRP_CONFLICT_MANTAIN; - } - - /* [ECMA-368 2nd Edition] 17.4.6-5a */ - if (our_tie_breaker == ext_tie_breaker && - our_beacon_slot < ext_beacon_slot) { - return UWB_DRP_CONFLICT_MANTAIN; - } - - /* [ECMA-368 2nd Edition] 17.4.6-5b */ - if (our_tie_breaker != ext_tie_breaker && - our_beacon_slot > ext_beacon_slot) { - return UWB_DRP_CONFLICT_MANTAIN; - } - - if (our_status == 0) { - if (our_tie_breaker == ext_tie_breaker) { - /* [ECMA-368 2nd Edition] 17.4.6-6a */ - if (our_beacon_slot > ext_beacon_slot) { - return UWB_DRP_CONFLICT_ACT2; - } - } else { - /* [ECMA-368 2nd Edition] 17.4.6-6b */ - if (our_beacon_slot < ext_beacon_slot) { - return UWB_DRP_CONFLICT_ACT2; - } - } - } else { - if (our_tie_breaker == ext_tie_breaker) { - /* [ECMA-368 2nd Edition] 17.4.6-7a */ - if (our_beacon_slot > ext_beacon_slot) { - return UWB_DRP_CONFLICT_ACT3; - } - } else { - /* [ECMA-368 2nd Edition] 17.4.6-7b */ - if (our_beacon_slot < ext_beacon_slot) { - return UWB_DRP_CONFLICT_ACT3; - } - } - } - return UWB_DRP_CONFLICT_MANTAIN; -} - -static void handle_conflict_normal(struct uwb_ie_drp *drp_ie, - int ext_beacon_slot, - struct uwb_rsv *rsv, - struct uwb_mas_bm *conflicting_mas) -{ - struct uwb_rc *rc = rsv->rc; - struct uwb_rsv_move *mv = &rsv->mv; - struct uwb_drp_backoff_win *bow = &rc->bow; - int action; - - action = evaluate_conflict_action(drp_ie, ext_beacon_slot, rsv, uwb_rsv_status(rsv)); - - if (uwb_rsv_is_owner(rsv)) { - switch(action) { - case UWB_DRP_CONFLICT_ACT2: - /* try move */ - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_TO_BE_MOVED); - if (bow->can_reserve_extra_mases == false) - uwb_rsv_backoff_win_increment(rc); - - break; - case UWB_DRP_CONFLICT_ACT3: - uwb_rsv_backoff_win_increment(rc); - /* drop some mases with reason modified */ - /* put in the companion the mases to be dropped */ - bitmap_and(mv->companion_mas.bm, rsv->mas.bm, conflicting_mas->bm, UWB_NUM_MAS); - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED); - default: - break; - } - } else { - switch(action) { - case UWB_DRP_CONFLICT_ACT2: - case UWB_DRP_CONFLICT_ACT3: - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT); - default: - break; - } - - } - -} - -static void handle_conflict_expanding(struct uwb_ie_drp *drp_ie, int ext_beacon_slot, - struct uwb_rsv *rsv, bool companion_only, - struct uwb_mas_bm *conflicting_mas) -{ - struct uwb_rc *rc = rsv->rc; - struct uwb_drp_backoff_win *bow = &rc->bow; - struct uwb_rsv_move *mv = &rsv->mv; - int action; - - if (companion_only) { - /* status of companion is 0 at this point */ - action = evaluate_conflict_action(drp_ie, ext_beacon_slot, rsv, 0); - if (uwb_rsv_is_owner(rsv)) { - switch(action) { - case UWB_DRP_CONFLICT_ACT2: - case UWB_DRP_CONFLICT_ACT3: - uwb_rsv_set_state(rsv, - UWB_RSV_STATE_O_ESTABLISHED); - rsv->needs_release_companion_mas = false; - if (bow->can_reserve_extra_mases == false) - uwb_rsv_backoff_win_increment(rc); - uwb_drp_avail_release(rsv->rc, - &rsv->mv.companion_mas); - } - } else { /* rsv is target */ - switch(action) { - case UWB_DRP_CONFLICT_ACT2: - case UWB_DRP_CONFLICT_ACT3: - uwb_rsv_set_state(rsv, - UWB_RSV_STATE_T_EXPANDING_CONFLICT); - /* send_drp_avail_ie = true; */ - } - } - } else { /* also base part of the reservation is conflicting */ - if (uwb_rsv_is_owner(rsv)) { - uwb_rsv_backoff_win_increment(rc); - /* remove companion part */ - uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas); - - /* drop some mases with reason modified */ - - /* put in the companion the mases to be dropped */ - bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, - conflicting_mas->bm, UWB_NUM_MAS); - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED); - } else { /* it is a target rsv */ - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT); - /* send_drp_avail_ie = true; */ - } - } -} - -static void uwb_drp_handle_conflict_rsv(struct uwb_rc *rc, struct uwb_rsv *rsv, - struct uwb_rc_evt_drp *drp_evt, - struct uwb_ie_drp *drp_ie, - struct uwb_mas_bm *conflicting_mas) -{ - struct uwb_rsv_move *mv; - - /* check if the conflicting reservation has two drp_ies */ - if (uwb_rsv_has_two_drp_ies(rsv)) { - mv = &rsv->mv; - if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm, - UWB_NUM_MAS)) { - handle_conflict_expanding(drp_ie, - drp_evt->beacon_slot_number, - rsv, false, conflicting_mas); - } else { - if (bitmap_intersects(mv->companion_mas.bm, - conflicting_mas->bm, UWB_NUM_MAS)) { - handle_conflict_expanding( - drp_ie, drp_evt->beacon_slot_number, - rsv, true, conflicting_mas); - } - } - } else if (bitmap_intersects(rsv->mas.bm, conflicting_mas->bm, - UWB_NUM_MAS)) { - handle_conflict_normal(drp_ie, drp_evt->beacon_slot_number, - rsv, conflicting_mas); - } -} - -static void uwb_drp_handle_all_conflict_rsv(struct uwb_rc *rc, - struct uwb_rc_evt_drp *drp_evt, - struct uwb_ie_drp *drp_ie, - struct uwb_mas_bm *conflicting_mas) -{ - struct uwb_rsv *rsv; - - list_for_each_entry(rsv, &rc->reservations, rc_node) { - uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie, - conflicting_mas); - } -} - -static void uwb_drp_process_target_accepted(struct uwb_rc *rc, - struct uwb_rsv *rsv, struct uwb_rc_evt_drp *drp_evt, - struct uwb_ie_drp *drp_ie, struct uwb_mas_bm *mas) -{ - struct uwb_rsv_move *mv = &rsv->mv; - int status; - - status = uwb_ie_drp_status(drp_ie); - - if (rsv->state == UWB_RSV_STATE_T_CONFLICT) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_CONFLICT); - return; - } - - if (rsv->state == UWB_RSV_STATE_T_EXPANDING_ACCEPTED) { - /* drp_ie is companion */ - if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) { - /* stroke companion */ - uwb_rsv_set_state(rsv, - UWB_RSV_STATE_T_EXPANDING_ACCEPTED); - } - } else { - if (!bitmap_equal(rsv->mas.bm, mas->bm, UWB_NUM_MAS)) { - if (uwb_drp_avail_reserve_pending(rc, mas) == -EBUSY) { - /* FIXME: there is a conflict, find - * the conflicting reservations and - * take a sensible action. Consider - * that in drp_ie there is the - * "neighbour" */ - uwb_drp_handle_all_conflict_rsv(rc, drp_evt, - drp_ie, mas); - } else { - /* accept the extra reservation */ - bitmap_copy(mv->companion_mas.bm, mas->bm, - UWB_NUM_MAS); - uwb_rsv_set_state(rsv, - UWB_RSV_STATE_T_EXPANDING_ACCEPTED); - } - } else { - if (status) { - uwb_rsv_set_state(rsv, - UWB_RSV_STATE_T_ACCEPTED); - } - } - - } -} - -/* - * Based on the DRP IE, transition a target reservation to a new - * state. - */ -static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv, - struct uwb_ie_drp *drp_ie, struct uwb_rc_evt_drp *drp_evt) -{ - struct device *dev = &rc->uwb_dev.dev; - struct uwb_rsv_move *mv = &rsv->mv; - int status; - enum uwb_drp_reason reason_code; - struct uwb_mas_bm mas; - - status = uwb_ie_drp_status(drp_ie); - reason_code = uwb_ie_drp_reason_code(drp_ie); - uwb_drp_ie_to_bm(&mas, drp_ie); - - switch (reason_code) { - case UWB_DRP_REASON_ACCEPTED: - uwb_drp_process_target_accepted(rc, rsv, drp_evt, drp_ie, &mas); - break; - - case UWB_DRP_REASON_MODIFIED: - /* check to see if we have already modified the reservation */ - if (bitmap_equal(rsv->mas.bm, mas.bm, UWB_NUM_MAS)) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED); - break; - } - - /* find if the owner wants to expand or reduce */ - if (bitmap_subset(mas.bm, rsv->mas.bm, UWB_NUM_MAS)) { - /* owner is reducing */ - bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mas.bm, - UWB_NUM_MAS); - uwb_drp_avail_release(rsv->rc, &mv->companion_mas); - } - - bitmap_copy(rsv->mas.bm, mas.bm, UWB_NUM_MAS); - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_RESIZED); - break; - default: - dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", - reason_code, status); - } -} - -static void uwb_drp_process_owner_accepted(struct uwb_rsv *rsv, - struct uwb_mas_bm *mas) -{ - struct uwb_rsv_move *mv = &rsv->mv; - - switch (rsv->state) { - case UWB_RSV_STATE_O_PENDING: - case UWB_RSV_STATE_O_INITIATED: - case UWB_RSV_STATE_O_ESTABLISHED: - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); - break; - case UWB_RSV_STATE_O_MODIFIED: - if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS)) - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); - else - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MODIFIED); - break; - - case UWB_RSV_STATE_O_MOVE_REDUCING: /* shouldn' t be a problem */ - if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS)) - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); - else - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING); - break; - case UWB_RSV_STATE_O_MOVE_EXPANDING: - if (bitmap_equal(mas->bm, mv->companion_mas.bm, UWB_NUM_MAS)) { - /* Companion reservation accepted */ - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING); - } else { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING); - } - break; - case UWB_RSV_STATE_O_MOVE_COMBINING: - if (bitmap_equal(mas->bm, rsv->mas.bm, UWB_NUM_MAS)) - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING); - else - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING); - break; - default: - break; - } -} -/* - * Based on the DRP IE, transition an owner reservation to a new - * state. - */ -static void uwb_drp_process_owner(struct uwb_rc *rc, struct uwb_rsv *rsv, - struct uwb_dev *src, struct uwb_ie_drp *drp_ie, - struct uwb_rc_evt_drp *drp_evt) -{ - struct device *dev = &rc->uwb_dev.dev; - int status; - enum uwb_drp_reason reason_code; - struct uwb_mas_bm mas; - - status = uwb_ie_drp_status(drp_ie); - reason_code = uwb_ie_drp_reason_code(drp_ie); - uwb_drp_ie_to_bm(&mas, drp_ie); - - if (status) { - switch (reason_code) { - case UWB_DRP_REASON_ACCEPTED: - uwb_drp_process_owner_accepted(rsv, &mas); - break; - default: - dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", - reason_code, status); - } - } else { - switch (reason_code) { - case UWB_DRP_REASON_PENDING: - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_PENDING); - break; - case UWB_DRP_REASON_DENIED: - uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); - break; - case UWB_DRP_REASON_CONFLICT: - /* resolve the conflict */ - bitmap_complement(mas.bm, src->last_availability_bm, - UWB_NUM_MAS); - uwb_drp_handle_conflict_rsv(rc, rsv, drp_evt, drp_ie, &mas); - break; - default: - dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", - reason_code, status); - } - } -} - -static void uwb_cnflt_alien_stroke_timer(struct uwb_cnflt_alien *cnflt) -{ - unsigned timeout_us = UWB_MAX_LOST_BEACONS * UWB_SUPERFRAME_LENGTH_US; - mod_timer(&cnflt->timer, jiffies + usecs_to_jiffies(timeout_us)); -} - -static void uwb_cnflt_update_work(struct work_struct *work) -{ - struct uwb_cnflt_alien *cnflt = container_of(work, - struct uwb_cnflt_alien, - cnflt_update_work); - struct uwb_cnflt_alien *c; - struct uwb_rc *rc = cnflt->rc; - - unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE; - - mutex_lock(&rc->rsvs_mutex); - - list_del(&cnflt->rc_node); - - /* update rc global conflicting alien bitmap */ - bitmap_zero(rc->cnflt_alien_bitmap.bm, UWB_NUM_MAS); - - list_for_each_entry(c, &rc->cnflt_alien_list, rc_node) { - bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm, - c->mas.bm, UWB_NUM_MAS); - } - - queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work, - usecs_to_jiffies(delay_us)); - - kfree(cnflt); - mutex_unlock(&rc->rsvs_mutex); -} - -static void uwb_cnflt_timer(struct timer_list *t) -{ - struct uwb_cnflt_alien *cnflt = from_timer(cnflt, t, timer); - - queue_work(cnflt->rc->rsv_workq, &cnflt->cnflt_update_work); -} - -/* - * We have received an DRP_IE of type Alien BP and we need to make - * sure we do not transmit in conflicting MASs. - */ -static void uwb_drp_handle_alien_drp(struct uwb_rc *rc, struct uwb_ie_drp *drp_ie) -{ - struct device *dev = &rc->uwb_dev.dev; - struct uwb_mas_bm mas; - struct uwb_cnflt_alien *cnflt; - unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE; - - uwb_drp_ie_to_bm(&mas, drp_ie); - - list_for_each_entry(cnflt, &rc->cnflt_alien_list, rc_node) { - if (bitmap_equal(cnflt->mas.bm, mas.bm, UWB_NUM_MAS)) { - /* Existing alien BP reservation conflicting - * bitmap, just reset the timer */ - uwb_cnflt_alien_stroke_timer(cnflt); - return; - } - } - - /* New alien BP reservation conflicting bitmap */ - - /* alloc and initialize new uwb_cnflt_alien */ - cnflt = kzalloc(sizeof(struct uwb_cnflt_alien), GFP_KERNEL); - if (!cnflt) { - dev_err(dev, "failed to alloc uwb_cnflt_alien struct\n"); - return; - } - - INIT_LIST_HEAD(&cnflt->rc_node); - timer_setup(&cnflt->timer, uwb_cnflt_timer, 0); - - cnflt->rc = rc; - INIT_WORK(&cnflt->cnflt_update_work, uwb_cnflt_update_work); - - bitmap_copy(cnflt->mas.bm, mas.bm, UWB_NUM_MAS); - - list_add_tail(&cnflt->rc_node, &rc->cnflt_alien_list); - - /* update rc global conflicting alien bitmap */ - bitmap_or(rc->cnflt_alien_bitmap.bm, rc->cnflt_alien_bitmap.bm, mas.bm, UWB_NUM_MAS); - - queue_delayed_work(rc->rsv_workq, &rc->rsv_alien_bp_work, usecs_to_jiffies(delay_us)); - - /* start the timer */ - uwb_cnflt_alien_stroke_timer(cnflt); -} - -static void uwb_drp_process_not_involved(struct uwb_rc *rc, - struct uwb_rc_evt_drp *drp_evt, - struct uwb_ie_drp *drp_ie) -{ - struct uwb_mas_bm mas; - - uwb_drp_ie_to_bm(&mas, drp_ie); - uwb_drp_handle_all_conflict_rsv(rc, drp_evt, drp_ie, &mas); -} - -static void uwb_drp_process_involved(struct uwb_rc *rc, struct uwb_dev *src, - struct uwb_rc_evt_drp *drp_evt, - struct uwb_ie_drp *drp_ie) -{ - struct uwb_rsv *rsv; - - rsv = uwb_rsv_find(rc, src, drp_ie); - if (!rsv) { - /* - * No reservation? It's either for a recently - * terminated reservation; or the DRP IE couldn't be - * processed (e.g., an invalid IE or out of memory). - */ - return; - } - - /* - * Do nothing with DRP IEs for reservations that have been - * terminated. - */ - if (rsv->state == UWB_RSV_STATE_NONE) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); - return; - } - - if (uwb_ie_drp_owner(drp_ie)) - uwb_drp_process_target(rc, rsv, drp_ie, drp_evt); - else - uwb_drp_process_owner(rc, rsv, src, drp_ie, drp_evt); - -} - - -static bool uwb_drp_involves_us(struct uwb_rc *rc, struct uwb_ie_drp *drp_ie) -{ - return uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, &drp_ie->dev_addr) == 0; -} - -/* - * Process a received DRP IE. - */ -static void uwb_drp_process(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt, - struct uwb_dev *src, struct uwb_ie_drp *drp_ie) -{ - if (uwb_ie_drp_type(drp_ie) == UWB_DRP_TYPE_ALIEN_BP) - uwb_drp_handle_alien_drp(rc, drp_ie); - else if (uwb_drp_involves_us(rc, drp_ie)) - uwb_drp_process_involved(rc, src, drp_evt, drp_ie); - else - uwb_drp_process_not_involved(rc, drp_evt, drp_ie); -} - -/* - * Process a received DRP Availability IE - */ -static void uwb_drp_availability_process(struct uwb_rc *rc, struct uwb_dev *src, - struct uwb_ie_drp_avail *drp_availability_ie) -{ - bitmap_copy(src->last_availability_bm, - drp_availability_ie->bmp, UWB_NUM_MAS); -} - -/* - * Process all the DRP IEs (both DRP IEs and the DRP Availability IE) - * from a device. - */ -static -void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt, - size_t ielen, struct uwb_dev *src_dev) -{ - struct device *dev = &rc->uwb_dev.dev; - struct uwb_ie_hdr *ie_hdr; - void *ptr; - - ptr = drp_evt->ie_data; - for (;;) { - ie_hdr = uwb_ie_next(&ptr, &ielen); - if (!ie_hdr) - break; - - switch (ie_hdr->element_id) { - case UWB_IE_DRP_AVAILABILITY: - uwb_drp_availability_process(rc, src_dev, (struct uwb_ie_drp_avail *)ie_hdr); - break; - case UWB_IE_DRP: - uwb_drp_process(rc, drp_evt, src_dev, (struct uwb_ie_drp *)ie_hdr); - break; - default: - dev_warn(dev, "unexpected IE in DRP notification\n"); - break; - } - } - - if (ielen > 0) - dev_warn(dev, "%d octets remaining in DRP notification\n", - (int)ielen); -} - -/** - * uwbd_evt_handle_rc_drp - handle a DRP_IE event - * @evt: the DRP_IE event from the radio controller - * - * This processes DRP notifications from the radio controller, either - * initiating a new reservation or transitioning an existing - * reservation into a different state. - * - * DRP notifications can occur for three different reasons: - * - * - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as - * the target or source have been received. - * - * These DRP IEs could be new or for an existing reservation. - * - * If the DRP IE for an existing reservation ceases to be to - * received for at least mMaxLostBeacons, the reservation should be - * considered to be terminated. Note that the TERMINATE reason (see - * below) may not always be signalled (e.g., the remote device has - * two or more reservations established with the RC). - * - * - UWB_DRP_NOTIF_CONFLICT: DRP IEs from any device in the beacon - * group conflict with the RC's reservations. - * - * - UWB_DRP_NOTIF_TERMINATE: DRP IEs are no longer being received - * from a device (i.e., it's terminated all reservations). - * - * Only the software state of the reservations is changed; the setting - * of the radio controller's DRP IEs is done after all the events in - * an event buffer are processed. This saves waiting multiple times - * for the SET_DRP_IE command to complete. - */ -int uwbd_evt_handle_rc_drp(struct uwb_event *evt) -{ - struct device *dev = &evt->rc->uwb_dev.dev; - struct uwb_rc *rc = evt->rc; - struct uwb_rc_evt_drp *drp_evt; - size_t ielength, bytes_left; - struct uwb_dev_addr src_addr; - struct uwb_dev *src_dev; - - /* Is there enough data to decode the event (and any IEs in - its payload)? */ - if (evt->notif.size < sizeof(*drp_evt)) { - dev_err(dev, "DRP event: Not enough data to decode event " - "[%zu bytes left, %zu needed]\n", - evt->notif.size, sizeof(*drp_evt)); - return 0; - } - bytes_left = evt->notif.size - sizeof(*drp_evt); - drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp, rceb); - ielength = le16_to_cpu(drp_evt->ie_length); - if (bytes_left != ielength) { - dev_err(dev, "DRP event: Not enough data in payload [%zu" - "bytes left, %zu declared in the event]\n", - bytes_left, ielength); - return 0; - } - - memcpy(src_addr.data, &drp_evt->src_addr, sizeof(src_addr)); - src_dev = uwb_dev_get_by_devaddr(rc, &src_addr); - if (!src_dev) { - /* - * A DRP notification from an unrecognized device. - * - * This is probably from a WUSB device that doesn't - * have an EUI-48 and therefore doesn't show up in the - * UWB device database. It's safe to simply ignore - * these. - */ - return 0; - } - - mutex_lock(&rc->rsvs_mutex); - - /* We do not distinguish from the reason */ - uwb_drp_process_all(rc, drp_evt, ielength, src_dev); - - mutex_unlock(&rc->rsvs_mutex); - - uwb_dev_put(src_dev); - return 0; -} diff --git a/drivers/staging/uwb/est.c b/drivers/staging/uwb/est.c deleted file mode 100644 index d4141ffdd775..000000000000 --- a/drivers/staging/uwb/est.c +++ /dev/null @@ -1,450 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band Radio Control - * Event Size Tables management - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - * - * Infrastructure, code and data tables for guessing the size of - * events received on the notification endpoints of UWB radio - * controllers. - * - * You define a table of events and for each, its size and how to get - * the extra size. - * - * ENTRY POINTS: - * - * uwb_est_{init/destroy}(): To initialize/release the EST subsystem. - * - * uwb_est_[u]register(): To un/register event size tables - * uwb_est_grow() - * - * uwb_est_find_size(): Get the size of an event - * uwb_est_get_size() - */ -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/export.h> - -#include "uwb-internal.h" - -struct uwb_est { - u16 type_event_high; - u16 vendor, product; - u8 entries; - const struct uwb_est_entry *entry; -}; - -static struct uwb_est *uwb_est; -static u8 uwb_est_size; -static u8 uwb_est_used; -static DEFINE_RWLOCK(uwb_est_lock); - -/** - * WUSB Standard Event Size Table, HWA-RC interface - * - * Sizes for events and notifications type 0 (general), high nibble 0. - */ -static -struct uwb_est_entry uwb_est_00_00xx[] = { - [UWB_RC_EVT_IE_RCV] = { - .size = sizeof(struct uwb_rc_evt_ie_rcv), - .offset = 1 + offsetof(struct uwb_rc_evt_ie_rcv, wIELength), - }, - [UWB_RC_EVT_BEACON] = { - .size = sizeof(struct uwb_rc_evt_beacon), - .offset = 1 + offsetof(struct uwb_rc_evt_beacon, wBeaconInfoLength), - }, - [UWB_RC_EVT_BEACON_SIZE] = { - .size = sizeof(struct uwb_rc_evt_beacon_size), - }, - [UWB_RC_EVT_BPOIE_CHANGE] = { - .size = sizeof(struct uwb_rc_evt_bpoie_change), - .offset = 1 + offsetof(struct uwb_rc_evt_bpoie_change, - wBPOIELength), - }, - [UWB_RC_EVT_BP_SLOT_CHANGE] = { - .size = sizeof(struct uwb_rc_evt_bp_slot_change), - }, - [UWB_RC_EVT_BP_SWITCH_IE_RCV] = { - .size = sizeof(struct uwb_rc_evt_bp_switch_ie_rcv), - .offset = 1 + offsetof(struct uwb_rc_evt_bp_switch_ie_rcv, wIELength), - }, - [UWB_RC_EVT_DEV_ADDR_CONFLICT] = { - .size = sizeof(struct uwb_rc_evt_dev_addr_conflict), - }, - [UWB_RC_EVT_DRP_AVAIL] = { - .size = sizeof(struct uwb_rc_evt_drp_avail) - }, - [UWB_RC_EVT_DRP] = { - .size = sizeof(struct uwb_rc_evt_drp), - .offset = 1 + offsetof(struct uwb_rc_evt_drp, ie_length), - }, - [UWB_RC_EVT_BP_SWITCH_STATUS] = { - .size = sizeof(struct uwb_rc_evt_bp_switch_status), - }, - [UWB_RC_EVT_CMD_FRAME_RCV] = { - .size = sizeof(struct uwb_rc_evt_cmd_frame_rcv), - .offset = 1 + offsetof(struct uwb_rc_evt_cmd_frame_rcv, dataLength), - }, - [UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV] = { - .size = sizeof(struct uwb_rc_evt_channel_change_ie_rcv), - .offset = 1 + offsetof(struct uwb_rc_evt_channel_change_ie_rcv, wIELength), - }, - [UWB_RC_CMD_CHANNEL_CHANGE] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_DEV_ADDR_MGMT] = { - .size = sizeof(struct uwb_rc_evt_dev_addr_mgmt) }, - [UWB_RC_CMD_GET_IE] = { - .size = sizeof(struct uwb_rc_evt_get_ie), - .offset = 1 + offsetof(struct uwb_rc_evt_get_ie, wIELength), - }, - [UWB_RC_CMD_RESET] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_SCAN] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_SET_BEACON_FILTER] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_SET_DRP_IE] = { - .size = sizeof(struct uwb_rc_evt_set_drp_ie), - }, - [UWB_RC_CMD_SET_IE] = { - .size = sizeof(struct uwb_rc_evt_set_ie), - }, - [UWB_RC_CMD_SET_NOTIFICATION_FILTER] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_SET_TX_POWER] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_SLEEP] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_START_BEACON] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_STOP_BEACON] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_BP_MERGE] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_SEND_COMMAND_FRAME] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, - [UWB_RC_CMD_SET_ASIE_NOTIF] = { - .size = sizeof(struct uwb_rc_evt_confirm), - }, -}; - -static -struct uwb_est_entry uwb_est_01_00xx[] = { - [UWB_RC_DAA_ENERGY_DETECTED] = { - .size = sizeof(struct uwb_rc_evt_daa_energy_detected), - }, - [UWB_RC_SET_DAA_ENERGY_MASK] = { - .size = sizeof(struct uwb_rc_evt_set_daa_energy_mask), - }, - [UWB_RC_SET_NOTIFICATION_FILTER_EX] = { - .size = sizeof(struct uwb_rc_evt_set_notification_filter_ex), - }, -}; - -/** - * Initialize the EST subsystem - * - * Register the standard tables also. - * - * FIXME: tag init - */ -int uwb_est_create(void) -{ - int result; - - uwb_est_size = 2; - uwb_est_used = 0; - uwb_est = kcalloc(uwb_est_size, sizeof(uwb_est[0]), GFP_KERNEL); - if (uwb_est == NULL) - return -ENOMEM; - - result = uwb_est_register(UWB_RC_CET_GENERAL, 0, 0xffff, 0xffff, - uwb_est_00_00xx, ARRAY_SIZE(uwb_est_00_00xx)); - if (result < 0) - goto out; - result = uwb_est_register(UWB_RC_CET_EX_TYPE_1, 0, 0xffff, 0xffff, - uwb_est_01_00xx, ARRAY_SIZE(uwb_est_01_00xx)); -out: - return result; -} - - -/** Clean it up */ -void uwb_est_destroy(void) -{ - kfree(uwb_est); - uwb_est = NULL; - uwb_est_size = uwb_est_used = 0; -} - - -/** - * Double the capacity of the EST table - * - * @returns 0 if ok, < 0 errno no error. - */ -static -int uwb_est_grow(void) -{ - size_t actual_size = uwb_est_size * sizeof(uwb_est[0]); - void *new = kmalloc_array(2, actual_size, GFP_ATOMIC); - if (new == NULL) - return -ENOMEM; - memcpy(new, uwb_est, actual_size); - memset(new + actual_size, 0, actual_size); - kfree(uwb_est); - uwb_est = new; - uwb_est_size *= 2; - return 0; -} - - -/** - * Register an event size table - * - * Makes room for it if the table is full, and then inserts it in the - * right position (entries are sorted by type, event_high, vendor and - * then product). - * - * @vendor: vendor code for matching against the device (0x0000 and - * 0xffff mean any); use 0x0000 to force all to match without - * checking possible vendor specific ones, 0xfffff to match - * after checking vendor specific ones. - * - * @product: product code from that vendor; same matching rules, use - * 0x0000 for not allowing vendor specific matches, 0xffff - * for allowing. - * - * This arragement just makes the tables sort differenty. Because the - * table is sorted by growing type-event_high-vendor-product, a zero - * vendor will match before than a 0x456a vendor, that will match - * before a 0xfffff vendor. - * - * @returns 0 if ok, < 0 errno on error (-ENOENT if not found). - */ -/* FIXME: add bus type to vendor/product code */ -int uwb_est_register(u8 type, u8 event_high, u16 vendor, u16 product, - const struct uwb_est_entry *entry, size_t entries) -{ - unsigned long flags; - unsigned itr; - int result = 0; - - write_lock_irqsave(&uwb_est_lock, flags); - if (uwb_est_used == uwb_est_size) { - result = uwb_est_grow(); - if (result < 0) - goto out; - } - /* Find the right spot to insert it in */ - for (itr = 0; itr < uwb_est_used; itr++) - if (uwb_est[itr].type_event_high < type - && uwb_est[itr].vendor < vendor - && uwb_est[itr].product < product) - break; - - /* Shift others to make room for the new one? */ - if (itr < uwb_est_used) - memmove(&uwb_est[itr+1], &uwb_est[itr], uwb_est_used - itr); - uwb_est[itr].type_event_high = type << 8 | event_high; - uwb_est[itr].vendor = vendor; - uwb_est[itr].product = product; - uwb_est[itr].entry = entry; - uwb_est[itr].entries = entries; - uwb_est_used++; -out: - write_unlock_irqrestore(&uwb_est_lock, flags); - return result; -} -EXPORT_SYMBOL_GPL(uwb_est_register); - - -/** - * Unregister an event size table - * - * This just removes the specified entry and moves the ones after it - * to fill in the gap. This is needed to keep the list sorted; no - * reallocation is done to reduce the size of the table. - * - * We unregister by all the data we used to register instead of by - * pointer to the @entry array because we might have used the same - * table for a bunch of IDs (for example). - * - * @returns 0 if ok, < 0 errno on error (-ENOENT if not found). - */ -int uwb_est_unregister(u8 type, u8 event_high, u16 vendor, u16 product, - const struct uwb_est_entry *entry, size_t entries) -{ - unsigned long flags; - unsigned itr; - struct uwb_est est_cmp = { - .type_event_high = type << 8 | event_high, - .vendor = vendor, - .product = product, - .entry = entry, - .entries = entries - }; - write_lock_irqsave(&uwb_est_lock, flags); - for (itr = 0; itr < uwb_est_used; itr++) - if (!memcmp(&uwb_est[itr], &est_cmp, sizeof(est_cmp))) - goto found; - write_unlock_irqrestore(&uwb_est_lock, flags); - return -ENOENT; - -found: - if (itr < uwb_est_used - 1) /* Not last one? move ones above */ - memmove(&uwb_est[itr], &uwb_est[itr+1], uwb_est_used - itr - 1); - uwb_est_used--; - write_unlock_irqrestore(&uwb_est_lock, flags); - return 0; -} -EXPORT_SYMBOL_GPL(uwb_est_unregister); - - -/** - * Get the size of an event from a table - * - * @rceb: pointer to the buffer with the event - * @rceb_size: size of the area pointed to by @rceb in bytes. - * @returns: > 0 Size of the event - * -ENOSPC An area big enough was not provided to look - * ahead into the event's guts and guess the size. - * -EINVAL Unknown event code (wEvent). - * - * This will look at the received RCEB and guess what is the total - * size. For variable sized events, it will look further ahead into - * their length field to see how much data should be read. - * - * Note this size is *not* final--the neh (Notification/Event Handle) - * might specificy an extra size to add. - */ -static -ssize_t uwb_est_get_size(struct uwb_rc *uwb_rc, struct uwb_est *est, - u8 event_low, const struct uwb_rceb *rceb, - size_t rceb_size) -{ - unsigned offset; - ssize_t size; - struct device *dev = &uwb_rc->uwb_dev.dev; - const struct uwb_est_entry *entry; - - size = -ENOENT; - if (event_low >= est->entries) { /* in range? */ - dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u out of range\n", - est, est->type_event_high, est->vendor, est->product, - est->entries, event_low); - goto out; - } - size = -ENOENT; - entry = &est->entry[event_low]; - if (entry->size == 0 && entry->offset == 0) { /* unknown? */ - dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u unknown\n", - est, est->type_event_high, est->vendor, est->product, - est->entries, event_low); - goto out; - } - offset = entry->offset; /* extra fries with that? */ - if (offset == 0) - size = entry->size; - else { - /* Ops, got an extra size field at 'offset'--read it */ - const void *ptr = rceb; - size_t type_size = 0; - offset--; - size = -ENOSPC; /* enough data for more? */ - switch (entry->type) { - case UWB_EST_16: type_size = sizeof(__le16); break; - case UWB_EST_8: type_size = sizeof(u8); break; - default: BUG(); - } - if (offset + type_size > rceb_size) { - dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: " - "not enough data to read extra size\n", - est, est->type_event_high, est->vendor, - est->product, est->entries); - goto out; - } - size = entry->size; - ptr += offset; - switch (entry->type) { - case UWB_EST_16: size += le16_to_cpu(*(__le16 *)ptr); break; - case UWB_EST_8: size += *(u8 *)ptr; break; - default: BUG(); - } - } -out: - return size; -} - - -/** - * Guesses the size of a WA event - * - * @rceb: pointer to the buffer with the event - * @rceb_size: size of the area pointed to by @rceb in bytes. - * @returns: > 0 Size of the event - * -ENOSPC An area big enough was not provided to look - * ahead into the event's guts and guess the size. - * -EINVAL Unknown event code (wEvent). - * - * This will look at the received RCEB and guess what is the total - * size by checking all the tables registered with - * uwb_est_register(). For variable sized events, it will look further - * ahead into their length field to see how much data should be read. - * - * Note this size is *not* final--the neh (Notification/Event Handle) - * might specificy an extra size to add or replace. - */ -ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb, - size_t rceb_size) -{ - /* FIXME: add vendor/product data */ - ssize_t size; - struct device *dev = &rc->uwb_dev.dev; - unsigned long flags; - unsigned itr; - u16 type_event_high, event; - - read_lock_irqsave(&uwb_est_lock, flags); - size = -ENOSPC; - if (rceb_size < sizeof(*rceb)) - goto out; - event = le16_to_cpu(rceb->wEvent); - type_event_high = rceb->bEventType << 8 | (event & 0xff00) >> 8; - for (itr = 0; itr < uwb_est_used; itr++) { - if (uwb_est[itr].type_event_high != type_event_high) - continue; - size = uwb_est_get_size(rc, &uwb_est[itr], - event & 0x00ff, rceb, rceb_size); - /* try more tables that might handle the same type */ - if (size != -ENOENT) - goto out; - } - dev_dbg(dev, - "event 0x%02x/%04x/%02x: no handlers available; RCEB %4ph\n", - (unsigned) rceb->bEventType, - (unsigned) le16_to_cpu(rceb->wEvent), - (unsigned) rceb->bEventContext, - rceb); - size = -ENOENT; -out: - read_unlock_irqrestore(&uwb_est_lock, flags); - return size; -} -EXPORT_SYMBOL_GPL(uwb_est_find_size); diff --git a/drivers/staging/uwb/hwa-rc.c b/drivers/staging/uwb/hwa-rc.c deleted file mode 100644 index b6effad749d7..000000000000 --- a/drivers/staging/uwb/hwa-rc.c +++ /dev/null @@ -1,929 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * WUSB Host Wire Adapter: Radio Control Interface (WUSB[8.6]) - * Radio Control command/event transport - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Initialize the Radio Control interface Driver. - * - * For each device probed, creates an 'struct hwarc' which contains - * just the representation of the UWB Radio Controller, and the logic - * for reading notifications and passing them to the UWB Core. - * - * So we initialize all of those, register the UWB Radio Controller - * and setup the notification/event handle to pipe the notifications - * to the UWB management Daemon. - * - * Command and event filtering. - * - * This is the driver for the Radio Control Interface described in WUSB - * 1.0. The core UWB module assumes that all drivers are compliant to the - * WHCI 0.95 specification. We thus create a filter that parses all - * incoming messages from the (WUSB 1.0) device and manipulate them to - * conform to the WHCI 0.95 specification. Similarly, outgoing messages - * are parsed and manipulated to conform to the WUSB 1.0 compliant messages - * that the device expects. Only a few messages are affected: - * Affected events: - * UWB_RC_EVT_BEACON - * UWB_RC_EVT_BP_SLOT_CHANGE - * UWB_RC_EVT_DRP_AVAIL - * UWB_RC_EVT_DRP - * Affected commands: - * UWB_RC_CMD_SCAN - * UWB_RC_CMD_SET_DRP_IE - */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/usb.h> -#include "../wusbcore/include/wusb.h" -#include "../wusbcore/include/wusb-wa.h" -#include "uwb.h" - -#include "uwb-internal.h" - -/* The device uses commands and events from the WHCI specification, although - * reporting itself as WUSB compliant. */ -#define WUSB_QUIRK_WHCI_CMD_EVT 0x01 - -/** - * Descriptor for an instance of the UWB Radio Control Driver that - * attaches to the RCI interface of the Host Wired Adapter. - * - * Unless there is a lock specific to the 'data members', all access - * is protected by uwb_rc->mutex. - * - * The NEEP (Notification/Event EndPoint) URB (@neep_urb) writes to - * @rd_buffer. Note there is no locking because it is perfectly (heh!) - * serialized--probe() submits an URB, callback is called, processes - * the data (synchronously), submits another URB, and so on. There is - * no concurrent access to the buffer. - */ -struct hwarc { - struct usb_device *usb_dev; - struct usb_interface *usb_iface; - struct uwb_rc *uwb_rc; /* UWB host controller */ - struct urb *neep_urb; /* Notification endpoint handling */ - struct edc neep_edc; - void *rd_buffer; /* NEEP read buffer */ -}; - - -/* Beacon received notification (WUSB 1.0 [8.6.3.2]) */ -struct uwb_rc_evt_beacon_WUSB_0100 { - struct uwb_rceb rceb; - u8 bChannelNumber; - __le16 wBPSTOffset; - u8 bLQI; - u8 bRSSI; - __le16 wBeaconInfoLength; - u8 BeaconInfo[]; -} __attribute__((packed)); - -/** - * Filter WUSB 1.0 BEACON RCV notification to be WHCI 0.95 - * - * @header: the incoming event - * @buf_size: size of buffer containing incoming event - * @new_size: size of event after filtering completed - * - * The WHCI 0.95 spec has a "Beacon Type" field. This value is unknown at - * the time we receive the beacon from WUSB so we just set it to - * UWB_RC_BEACON_TYPE_NEIGHBOR as a default. - * The solution below allocates memory upon receipt of every beacon from a - * WUSB device. This will deteriorate performance. What is the right way to - * do this? - */ -static -int hwarc_filter_evt_beacon_WUSB_0100(struct uwb_rc *rc, - struct uwb_rceb **header, - const size_t buf_size, - size_t *new_size) -{ - struct uwb_rc_evt_beacon_WUSB_0100 *be; - struct uwb_rc_evt_beacon *newbe; - size_t bytes_left, ielength; - struct device *dev = &rc->uwb_dev.dev; - - be = container_of(*header, struct uwb_rc_evt_beacon_WUSB_0100, rceb); - bytes_left = buf_size; - if (bytes_left < sizeof(*be)) { - dev_err(dev, "Beacon Received Notification: Not enough data " - "to decode for filtering (%zu vs %zu bytes needed)\n", - bytes_left, sizeof(*be)); - return -EINVAL; - } - bytes_left -= sizeof(*be); - ielength = le16_to_cpu(be->wBeaconInfoLength); - if (bytes_left < ielength) { - dev_err(dev, "Beacon Received Notification: Not enough data " - "to decode IEs (%zu vs %zu bytes needed)\n", - bytes_left, ielength); - return -EINVAL; - } - newbe = kzalloc(sizeof(*newbe) + ielength, GFP_ATOMIC); - if (newbe == NULL) - return -ENOMEM; - newbe->rceb = be->rceb; - newbe->bChannelNumber = be->bChannelNumber; - newbe->bBeaconType = UWB_RC_BEACON_TYPE_NEIGHBOR; - newbe->wBPSTOffset = be->wBPSTOffset; - newbe->bLQI = be->bLQI; - newbe->bRSSI = be->bRSSI; - newbe->wBeaconInfoLength = be->wBeaconInfoLength; - memcpy(newbe->BeaconInfo, be->BeaconInfo, ielength); - *header = &newbe->rceb; - *new_size = sizeof(*newbe) + ielength; - return 1; /* calling function will free memory */ -} - - -/* DRP Availability change notification (WUSB 1.0 [8.6.3.8]) */ -struct uwb_rc_evt_drp_avail_WUSB_0100 { - struct uwb_rceb rceb; - __le16 wIELength; - u8 IEData[]; -} __attribute__((packed)); - -/** - * Filter WUSB 1.0 DRP AVAILABILITY CHANGE notification to be WHCI 0.95 - * - * @header: the incoming event - * @buf_size: size of buffer containing incoming event - * @new_size: size of event after filtering completed - */ -static -int hwarc_filter_evt_drp_avail_WUSB_0100(struct uwb_rc *rc, - struct uwb_rceb **header, - const size_t buf_size, - size_t *new_size) -{ - struct uwb_rc_evt_drp_avail_WUSB_0100 *da; - struct uwb_rc_evt_drp_avail *newda; - struct uwb_ie_hdr *ie_hdr; - size_t bytes_left, ielength; - struct device *dev = &rc->uwb_dev.dev; - - - da = container_of(*header, struct uwb_rc_evt_drp_avail_WUSB_0100, rceb); - bytes_left = buf_size; - if (bytes_left < sizeof(*da)) { - dev_err(dev, "Not enough data to decode DRP Avail " - "Notification for filtering. Expected %zu, " - "received %zu.\n", (size_t)sizeof(*da), bytes_left); - return -EINVAL; - } - bytes_left -= sizeof(*da); - ielength = le16_to_cpu(da->wIELength); - if (bytes_left < ielength) { - dev_err(dev, "DRP Avail Notification filter: IE length " - "[%zu bytes] does not match actual length " - "[%zu bytes].\n", ielength, bytes_left); - return -EINVAL; - } - if (ielength < sizeof(*ie_hdr)) { - dev_err(dev, "DRP Avail Notification filter: Not enough " - "data to decode IE [%zu bytes, %zu needed]\n", - ielength, sizeof(*ie_hdr)); - return -EINVAL; - } - ie_hdr = (void *) da->IEData; - if (ie_hdr->length > 32) { - dev_err(dev, "DRP Availability Change event has unexpected " - "length for filtering. Expected < 32 bytes, " - "got %zu bytes.\n", (size_t)ie_hdr->length); - return -EINVAL; - } - newda = kzalloc(sizeof(*newda), GFP_ATOMIC); - if (newda == NULL) - return -ENOMEM; - newda->rceb = da->rceb; - memcpy(newda->bmp, (u8 *) ie_hdr + sizeof(*ie_hdr), ie_hdr->length); - *header = &newda->rceb; - *new_size = sizeof(*newda); - return 1; /* calling function will free memory */ -} - - -/* DRP notification (WUSB 1.0 [8.6.3.9]) */ -struct uwb_rc_evt_drp_WUSB_0100 { - struct uwb_rceb rceb; - struct uwb_dev_addr wSrcAddr; - u8 bExplicit; - __le16 wIELength; - u8 IEData[]; -} __attribute__((packed)); - -/** - * Filter WUSB 1.0 DRP Notification to be WHCI 0.95 - * - * @header: the incoming event - * @buf_size: size of buffer containing incoming event - * @new_size: size of event after filtering completed - * - * It is hard to manage DRP reservations without having a Reason code. - * Unfortunately there is none in the WUSB spec. We just set the default to - * DRP IE RECEIVED. - * We do not currently use the bBeaconSlotNumber value, so we set this to - * zero for now. - */ -static -int hwarc_filter_evt_drp_WUSB_0100(struct uwb_rc *rc, - struct uwb_rceb **header, - const size_t buf_size, - size_t *new_size) -{ - struct uwb_rc_evt_drp_WUSB_0100 *drpev; - struct uwb_rc_evt_drp *newdrpev; - size_t bytes_left, ielength; - struct device *dev = &rc->uwb_dev.dev; - - drpev = container_of(*header, struct uwb_rc_evt_drp_WUSB_0100, rceb); - bytes_left = buf_size; - if (bytes_left < sizeof(*drpev)) { - dev_err(dev, "Not enough data to decode DRP Notification " - "for filtering. Expected %zu, received %zu.\n", - (size_t)sizeof(*drpev), bytes_left); - return -EINVAL; - } - ielength = le16_to_cpu(drpev->wIELength); - bytes_left -= sizeof(*drpev); - if (bytes_left < ielength) { - dev_err(dev, "DRP Notification filter: header length [%zu " - "bytes] does not match actual length [%zu " - "bytes].\n", ielength, bytes_left); - return -EINVAL; - } - newdrpev = kzalloc(sizeof(*newdrpev) + ielength, GFP_ATOMIC); - if (newdrpev == NULL) - return -ENOMEM; - newdrpev->rceb = drpev->rceb; - newdrpev->src_addr = drpev->wSrcAddr; - newdrpev->reason = UWB_DRP_NOTIF_DRP_IE_RCVD; - newdrpev->beacon_slot_number = 0; - newdrpev->ie_length = drpev->wIELength; - memcpy(newdrpev->ie_data, drpev->IEData, ielength); - *header = &newdrpev->rceb; - *new_size = sizeof(*newdrpev) + ielength; - return 1; /* calling function will free memory */ -} - - -/* Scan Command (WUSB 1.0 [8.6.2.5]) */ -struct uwb_rc_cmd_scan_WUSB_0100 { - struct uwb_rccb rccb; - u8 bChannelNumber; - u8 bScanState; -} __attribute__((packed)); - -/** - * Filter WHCI 0.95 SCAN command to be WUSB 1.0 SCAN command - * - * @header: command sent to device (compliant to WHCI 0.95) - * @size: size of command sent to device - * - * We only reduce the size by two bytes because the WUSB 1.0 scan command - * does not have the last field (wStarttime). Also, make sure we don't send - * the device an unexpected scan type. - */ -static -int hwarc_filter_cmd_scan_WUSB_0100(struct uwb_rc *rc, - struct uwb_rccb **header, - size_t *size) -{ - struct uwb_rc_cmd_scan *sc; - - sc = container_of(*header, struct uwb_rc_cmd_scan, rccb); - - if (sc->bScanState == UWB_SCAN_ONLY_STARTTIME) - sc->bScanState = UWB_SCAN_ONLY; - /* Don't send the last two bytes. */ - *size -= 2; - return 0; -} - - -/* SET DRP IE command (WUSB 1.0 [8.6.2.7]) */ -struct uwb_rc_cmd_set_drp_ie_WUSB_0100 { - struct uwb_rccb rccb; - u8 bExplicit; - __le16 wIELength; - struct uwb_ie_drp IEData[]; -} __attribute__((packed)); - -/** - * Filter WHCI 0.95 SET DRP IE command to be WUSB 1.0 SET DRP IE command - * - * @header: command sent to device (compliant to WHCI 0.95) - * @size: size of command sent to device - * - * WUSB has an extra bExplicit field - we assume always explicit - * negotiation so this field is set. The command expected by the device is - * thus larger than the one prepared by the driver so we need to - * reallocate memory to accommodate this. - * We trust the driver to send us the correct data so no checking is done - * on incoming data - evn though it is variable length. - */ -static -int hwarc_filter_cmd_set_drp_ie_WUSB_0100(struct uwb_rc *rc, - struct uwb_rccb **header, - size_t *size) -{ - struct uwb_rc_cmd_set_drp_ie *orgcmd; - struct uwb_rc_cmd_set_drp_ie_WUSB_0100 *cmd; - size_t ielength; - - orgcmd = container_of(*header, struct uwb_rc_cmd_set_drp_ie, rccb); - ielength = le16_to_cpu(orgcmd->wIELength); - cmd = kzalloc(sizeof(*cmd) + ielength, GFP_KERNEL); - if (cmd == NULL) - return -ENOMEM; - cmd->rccb = orgcmd->rccb; - cmd->bExplicit = 0; - cmd->wIELength = orgcmd->wIELength; - memcpy(cmd->IEData, orgcmd->IEData, ielength); - *header = &cmd->rccb; - *size = sizeof(*cmd) + ielength; - return 1; /* calling function will free memory */ -} - - -/** - * Filter data from WHCI driver to WUSB device - * - * @header: WHCI 0.95 compliant command from driver - * @size: length of command - * - * The routine managing commands to the device (uwb_rc_cmd()) will call the - * filtering function pointer (if it exists) before it passes any data to - * the device. At this time the command has been formatted according to - * WHCI 0.95 and is ready to be sent to the device. - * - * The filter function will be provided with the current command and its - * length. The function will manipulate the command if necessary and - * potentially reallocate memory for a command that needed more memory that - * the given command. If new memory was created the function will return 1 - * to indicate to the calling function that the memory need to be freed - * when not needed any more. The size will contain the new length of the - * command. - * If memory has not been allocated we rely on the original mechanisms to - * free the memory of the command - even when we reduce the value of size. - */ -static -int hwarc_filter_cmd_WUSB_0100(struct uwb_rc *rc, struct uwb_rccb **header, - size_t *size) -{ - int result; - struct uwb_rccb *rccb = *header; - int cmd = le16_to_cpu(rccb->wCommand); - switch (cmd) { - case UWB_RC_CMD_SCAN: - result = hwarc_filter_cmd_scan_WUSB_0100(rc, header, size); - break; - case UWB_RC_CMD_SET_DRP_IE: - result = hwarc_filter_cmd_set_drp_ie_WUSB_0100(rc, header, size); - break; - default: - result = -ENOANO; - break; - } - return result; -} - - -/** - * Filter data from WHCI driver to WUSB device - * - * @header: WHCI 0.95 compliant command from driver - * @size: length of command - * - * Filter commands based on which protocol the device supports. The WUSB - * errata should be the same as WHCI 0.95 so we do not filter that here - - * only WUSB 1.0. - */ -static -int hwarc_filter_cmd(struct uwb_rc *rc, struct uwb_rccb **header, - size_t *size) -{ - int result = -ENOANO; - if (rc->version == 0x0100) - result = hwarc_filter_cmd_WUSB_0100(rc, header, size); - return result; -} - - -/** - * Compute return value as sum of incoming value and value at given offset - * - * @rceb: event for which we compute the size, it contains a variable - * length field. - * @core_size: size of the "non variable" part of the event - * @offset: place in event where the length of the variable part is stored - * @buf_size: total length of buffer in which event arrived - we need to make - * sure we read the offset in memory that is still part of the event - */ -static -ssize_t hwarc_get_event_size(struct uwb_rc *rc, const struct uwb_rceb *rceb, - size_t core_size, size_t offset, - const size_t buf_size) -{ - ssize_t size = -ENOSPC; - const void *ptr = rceb; - size_t type_size = sizeof(__le16); - struct device *dev = &rc->uwb_dev.dev; - - if (offset + type_size >= buf_size) { - dev_err(dev, "Not enough data to read extra size of event " - "0x%02x/%04x/%02x, only got %zu bytes.\n", - rceb->bEventType, le16_to_cpu(rceb->wEvent), - rceb->bEventContext, buf_size); - goto out; - } - ptr += offset; - size = core_size + le16_to_cpu(*(__le16 *)ptr); -out: - return size; -} - - -/* Beacon slot change notification (WUSB 1.0 [8.6.3.5]) */ -struct uwb_rc_evt_bp_slot_change_WUSB_0100 { - struct uwb_rceb rceb; - u8 bSlotNumber; -} __attribute__((packed)); - - -/** - * Filter data from WUSB device to WHCI driver - * - * @header: incoming event - * @buf_size: size of buffer in which event arrived - * @_event_size: actual size of event in the buffer - * @new_size: size of event after filtered - * - * We don't know how the buffer is constructed - there may be more than one - * event in it so buffer length does not determine event length. We first - * determine the expected size of the incoming event. This value is passed - * back only if the actual filtering succeeded (so we know the computed - * expected size is correct). This value will be zero if - * the event did not need any filtering. - * - * WHCI interprets the BP Slot Change event's data differently than - * WUSB. The event sizes are exactly the same. The data field - * indicates the new beacon slot in which a RC is transmitting its - * beacon. The maximum value of this is 96 (wMacBPLength ECMA-368 - * 17.16 (Table 117)). We thus know that the WUSB value will not set - * the bit bNoSlot, so we don't really do anything (placeholder). - */ -static -int hwarc_filter_event_WUSB_0100(struct uwb_rc *rc, struct uwb_rceb **header, - const size_t buf_size, size_t *_real_size, - size_t *_new_size) -{ - int result = -ENOANO; - struct uwb_rceb *rceb = *header; - int event = le16_to_cpu(rceb->wEvent); - ssize_t event_size; - size_t core_size, offset; - - if (rceb->bEventType != UWB_RC_CET_GENERAL) - goto out; - switch (event) { - case UWB_RC_EVT_BEACON: - core_size = sizeof(struct uwb_rc_evt_beacon_WUSB_0100); - offset = offsetof(struct uwb_rc_evt_beacon_WUSB_0100, - wBeaconInfoLength); - event_size = hwarc_get_event_size(rc, rceb, core_size, - offset, buf_size); - if (event_size < 0) - goto out; - *_real_size = event_size; - result = hwarc_filter_evt_beacon_WUSB_0100(rc, header, - buf_size, _new_size); - break; - case UWB_RC_EVT_BP_SLOT_CHANGE: - *_new_size = *_real_size = - sizeof(struct uwb_rc_evt_bp_slot_change_WUSB_0100); - result = 0; - break; - - case UWB_RC_EVT_DRP_AVAIL: - core_size = sizeof(struct uwb_rc_evt_drp_avail_WUSB_0100); - offset = offsetof(struct uwb_rc_evt_drp_avail_WUSB_0100, - wIELength); - event_size = hwarc_get_event_size(rc, rceb, core_size, - offset, buf_size); - if (event_size < 0) - goto out; - *_real_size = event_size; - result = hwarc_filter_evt_drp_avail_WUSB_0100( - rc, header, buf_size, _new_size); - break; - - case UWB_RC_EVT_DRP: - core_size = sizeof(struct uwb_rc_evt_drp_WUSB_0100); - offset = offsetof(struct uwb_rc_evt_drp_WUSB_0100, wIELength); - event_size = hwarc_get_event_size(rc, rceb, core_size, - offset, buf_size); - if (event_size < 0) - goto out; - *_real_size = event_size; - result = hwarc_filter_evt_drp_WUSB_0100(rc, header, - buf_size, _new_size); - break; - - default: - break; - } -out: - return result; -} - -/** - * Filter data from WUSB device to WHCI driver - * - * @header: incoming event - * @buf_size: size of buffer in which event arrived - * @_event_size: actual size of event in the buffer - * @_new_size: size of event after filtered - * - * Filter events based on which protocol the device supports. The WUSB - * errata should be the same as WHCI 0.95 so we do not filter that here - - * only WUSB 1.0. - * - * If we don't handle it, we return -ENOANO (why the weird error code? - * well, so if I get it, I can pinpoint in the code that raised - * it...after all, not too many places use the higher error codes). - */ -static -int hwarc_filter_event(struct uwb_rc *rc, struct uwb_rceb **header, - const size_t buf_size, size_t *_real_size, - size_t *_new_size) -{ - int result = -ENOANO; - if (rc->version == 0x0100) - result = hwarc_filter_event_WUSB_0100( - rc, header, buf_size, _real_size, _new_size); - return result; -} - - -/** - * Execute an UWB RC command on HWA - * - * @rc: Instance of a Radio Controller that is a HWA - * @cmd: Buffer containing the RCCB and payload to execute - * @cmd_size: Size of the command buffer. - * - * NOTE: rc's mutex has to be locked - */ -static -int hwarc_cmd(struct uwb_rc *uwb_rc, const struct uwb_rccb *cmd, size_t cmd_size) -{ - struct hwarc *hwarc = uwb_rc->priv; - return usb_control_msg( - hwarc->usb_dev, usb_sndctrlpipe(hwarc->usb_dev, 0), - WA_EXEC_RC_CMD, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, hwarc->usb_iface->cur_altsetting->desc.bInterfaceNumber, - (void *) cmd, cmd_size, 100 /* FIXME: this is totally arbitrary */); -} - -static -int hwarc_reset(struct uwb_rc *uwb_rc) -{ - struct hwarc *hwarc = uwb_rc->priv; - int result; - - /* device lock must be held when calling usb_reset_device. */ - result = usb_lock_device_for_reset(hwarc->usb_dev, NULL); - if (result >= 0) { - result = usb_reset_device(hwarc->usb_dev); - usb_unlock_device(hwarc->usb_dev); - } - - return result; -} - -/** - * Callback for the notification and event endpoint - * - * Check's that everything is fine and then passes the read data to - * the notification/event handling mechanism (neh). - */ -static -void hwarc_neep_cb(struct urb *urb) -{ - struct hwarc *hwarc = urb->context; - struct usb_interface *usb_iface = hwarc->usb_iface; - struct device *dev = &usb_iface->dev; - int result; - - switch (result = urb->status) { - case 0: - uwb_rc_neh_grok(hwarc->uwb_rc, urb->transfer_buffer, - urb->actual_length); - break; - case -ECONNRESET: /* Not an error, but a controlled situation; */ - case -ENOENT: /* (we killed the URB)...so, no broadcast */ - goto out; - case -ESHUTDOWN: /* going away! */ - goto out; - default: /* On general errors, retry unless it gets ugly */ - if (edc_inc(&hwarc->neep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)) - goto error_exceeded; - dev_err(dev, "NEEP: URB error %d\n", urb->status); - } - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result < 0 && result != -ENODEV && result != -EPERM) { - /* ignoring unrecoverable errors */ - dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n", - result); - goto error; - } -out: - return; - -error_exceeded: - dev_err(dev, "NEEP: URB max acceptable errors " - "exceeded, resetting device\n"); -error: - uwb_rc_neh_error(hwarc->uwb_rc, result); - uwb_rc_reset_all(hwarc->uwb_rc); - return; -} - -static void hwarc_init(struct hwarc *hwarc) -{ - edc_init(&hwarc->neep_edc); -} - -/** - * Initialize the notification/event endpoint stuff - * - * Note this is effectively a parallel thread; it knows that - * hwarc->uwb_rc always exists because the existence of a 'hwarc' - * means that there is a reverence on the hwarc->uwb_rc (see - * _probe()), and thus _neep_cb() can execute safely. - */ -static int hwarc_neep_init(struct uwb_rc *rc) -{ - struct hwarc *hwarc = rc->priv; - struct usb_interface *iface = hwarc->usb_iface; - struct usb_device *usb_dev = interface_to_usbdev(iface); - struct device *dev = &iface->dev; - int result; - struct usb_endpoint_descriptor *epd; - - epd = &iface->cur_altsetting->endpoint[0].desc; - hwarc->rd_buffer = (void *) __get_free_page(GFP_KERNEL); - if (hwarc->rd_buffer == NULL) { - dev_err(dev, "Unable to allocate notification's read buffer\n"); - goto error_rd_buffer; - } - hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL); - if (hwarc->neep_urb == NULL) - goto error_urb_alloc; - usb_fill_int_urb(hwarc->neep_urb, usb_dev, - usb_rcvintpipe(usb_dev, epd->bEndpointAddress), - hwarc->rd_buffer, PAGE_SIZE, - hwarc_neep_cb, hwarc, epd->bInterval); - result = usb_submit_urb(hwarc->neep_urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "Cannot submit notification URB: %d\n", result); - goto error_neep_submit; - } - return 0; - -error_neep_submit: - usb_free_urb(hwarc->neep_urb); - hwarc->neep_urb = NULL; -error_urb_alloc: - free_page((unsigned long)hwarc->rd_buffer); - hwarc->rd_buffer = NULL; -error_rd_buffer: - return -ENOMEM; -} - - -/** Clean up all the notification endpoint resources */ -static void hwarc_neep_release(struct uwb_rc *rc) -{ - struct hwarc *hwarc = rc->priv; - - usb_kill_urb(hwarc->neep_urb); - usb_free_urb(hwarc->neep_urb); - hwarc->neep_urb = NULL; - - free_page((unsigned long)hwarc->rd_buffer); - hwarc->rd_buffer = NULL; -} - -/** - * Get the version from class-specific descriptor - * - * NOTE: this descriptor comes with the big bundled configuration - * descriptor that includes the interfaces' and endpoints', so - * we just look for it in the cached copy kept by the USB stack. - * - * NOTE2: We convert LE fields to CPU order. - */ -static int hwarc_get_version(struct uwb_rc *rc) -{ - int result; - - struct hwarc *hwarc = rc->priv; - struct uwb_rc_control_intf_class_desc *descr; - struct device *dev = &rc->uwb_dev.dev; - struct usb_device *usb_dev = hwarc->usb_dev; - char *itr; - struct usb_descriptor_header *hdr; - size_t itr_size, actconfig_idx; - u16 version; - - actconfig_idx = (usb_dev->actconfig - usb_dev->config) / - sizeof(usb_dev->config[0]); - itr = usb_dev->rawdescriptors[actconfig_idx]; - itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); - while (itr_size >= sizeof(*hdr)) { - hdr = (struct usb_descriptor_header *) itr; - dev_dbg(dev, "Extra device descriptor: " - "type %02x/%u bytes @ %zu (%zu left)\n", - hdr->bDescriptorType, hdr->bLength, - (itr - usb_dev->rawdescriptors[actconfig_idx]), - itr_size); - if (hdr->bDescriptorType == USB_DT_CS_RADIO_CONTROL) - goto found; - itr += hdr->bLength; - itr_size -= hdr->bLength; - } - dev_err(dev, "cannot find Radio Control Interface Class descriptor\n"); - return -ENODEV; - -found: - result = -EINVAL; - if (hdr->bLength > itr_size) { /* is it available? */ - dev_err(dev, "incomplete Radio Control Interface Class " - "descriptor (%zu bytes left, %u needed)\n", - itr_size, hdr->bLength); - goto error; - } - if (hdr->bLength < sizeof(*descr)) { - dev_err(dev, "short Radio Control Interface Class " - "descriptor\n"); - goto error; - } - descr = (struct uwb_rc_control_intf_class_desc *) hdr; - /* Make LE fields CPU order */ - version = __le16_to_cpu(descr->bcdRCIVersion); - if (version != 0x0100) { - dev_err(dev, "Device reports protocol version 0x%04x. We " - "do not support that. \n", version); - result = -EINVAL; - goto error; - } - rc->version = version; - dev_dbg(dev, "Device supports WUSB protocol version 0x%04x \n", rc->version); - result = 0; -error: - return result; -} - -/* - * By creating a 'uwb_rc', we have a reference on it -- that reference - * is the one we drop when we disconnect. - * - * No need to switch altsettings; according to WUSB1.0[8.6.1.1], there - * is only one altsetting allowed. - */ -static int hwarc_probe(struct usb_interface *iface, - const struct usb_device_id *id) -{ - int result; - struct uwb_rc *uwb_rc; - struct hwarc *hwarc; - struct device *dev = &iface->dev; - - if (iface->cur_altsetting->desc.bNumEndpoints < 1) - return -ENODEV; - if (!usb_endpoint_xfer_int(&iface->cur_altsetting->endpoint[0].desc)) - return -ENODEV; - - result = -ENOMEM; - uwb_rc = uwb_rc_alloc(); - if (uwb_rc == NULL) { - dev_err(dev, "unable to allocate RC instance\n"); - goto error_rc_alloc; - } - hwarc = kzalloc(sizeof(*hwarc), GFP_KERNEL); - if (hwarc == NULL) { - dev_err(dev, "unable to allocate HWA RC instance\n"); - goto error_alloc; - } - hwarc_init(hwarc); - hwarc->usb_dev = usb_get_dev(interface_to_usbdev(iface)); - hwarc->usb_iface = usb_get_intf(iface); - hwarc->uwb_rc = uwb_rc; - - uwb_rc->owner = THIS_MODULE; - uwb_rc->start = hwarc_neep_init; - uwb_rc->stop = hwarc_neep_release; - uwb_rc->cmd = hwarc_cmd; - uwb_rc->reset = hwarc_reset; - if (id->driver_info & WUSB_QUIRK_WHCI_CMD_EVT) { - uwb_rc->filter_cmd = NULL; - uwb_rc->filter_event = NULL; - } else { - uwb_rc->filter_cmd = hwarc_filter_cmd; - uwb_rc->filter_event = hwarc_filter_event; - } - - result = uwb_rc_add(uwb_rc, dev, hwarc); - if (result < 0) - goto error_rc_add; - result = hwarc_get_version(uwb_rc); - if (result < 0) { - dev_err(dev, "cannot retrieve version of RC \n"); - goto error_get_version; - } - usb_set_intfdata(iface, hwarc); - return 0; - -error_get_version: - uwb_rc_rm(uwb_rc); -error_rc_add: - usb_put_intf(iface); - usb_put_dev(hwarc->usb_dev); - kfree(hwarc); -error_alloc: - uwb_rc_put(uwb_rc); -error_rc_alloc: - return result; -} - -static void hwarc_disconnect(struct usb_interface *iface) -{ - struct hwarc *hwarc = usb_get_intfdata(iface); - struct uwb_rc *uwb_rc = hwarc->uwb_rc; - - usb_set_intfdata(hwarc->usb_iface, NULL); - uwb_rc_rm(uwb_rc); - usb_put_intf(hwarc->usb_iface); - usb_put_dev(hwarc->usb_dev); - kfree(hwarc); - uwb_rc_put(uwb_rc); /* when creating the device, refcount = 1 */ -} - -static int hwarc_pre_reset(struct usb_interface *iface) -{ - struct hwarc *hwarc = usb_get_intfdata(iface); - struct uwb_rc *uwb_rc = hwarc->uwb_rc; - - uwb_rc_pre_reset(uwb_rc); - return 0; -} - -static int hwarc_post_reset(struct usb_interface *iface) -{ - struct hwarc *hwarc = usb_get_intfdata(iface); - struct uwb_rc *uwb_rc = hwarc->uwb_rc; - - return uwb_rc_post_reset(uwb_rc); -} - -/** USB device ID's that we handle */ -static const struct usb_device_id hwarc_id_table[] = { - /* D-Link DUB-1210 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3d02, 0xe0, 0x01, 0x02), - .driver_info = WUSB_QUIRK_WHCI_CMD_EVT }, - /* Intel i1480 (using firmware 1.3PA2-20070828) */ - { USB_DEVICE_AND_INTERFACE_INFO(0x8086, 0x0c3b, 0xe0, 0x01, 0x02), - .driver_info = WUSB_QUIRK_WHCI_CMD_EVT }, - /* Alereon 5310 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x01, 0x02), - .driver_info = WUSB_QUIRK_WHCI_CMD_EVT }, - /* Alereon 5611 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x01, 0x02), - .driver_info = WUSB_QUIRK_WHCI_CMD_EVT }, - /* Generic match for the Radio Control interface */ - { USB_INTERFACE_INFO(0xe0, 0x01, 0x02), }, - { }, -}; -MODULE_DEVICE_TABLE(usb, hwarc_id_table); - -static struct usb_driver hwarc_driver = { - .name = "hwa-rc", - .id_table = hwarc_id_table, - .probe = hwarc_probe, - .disconnect = hwarc_disconnect, - .pre_reset = hwarc_pre_reset, - .post_reset = hwarc_post_reset, -}; - -module_usb_driver(hwarc_driver); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Host Wireless Adapter Radio Control Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/uwb/i1480/Makefile b/drivers/staging/uwb/i1480/Makefile deleted file mode 100644 index d26fb9b845ae..000000000000 --- a/drivers/staging/uwb/i1480/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_UWB_I1480U) += dfu/ i1480-est.o diff --git a/drivers/staging/uwb/i1480/dfu/Makefile b/drivers/staging/uwb/i1480/dfu/Makefile deleted file mode 100644 index 4739fdac5922..000000000000 --- a/drivers/staging/uwb/i1480/dfu/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_UWB_I1480U) += i1480-dfu-usb.o - -i1480-dfu-usb-objs := \ - dfu.o \ - mac.o \ - phy.o \ - usb.o - - diff --git a/drivers/staging/uwb/i1480/dfu/dfu.c b/drivers/staging/uwb/i1480/dfu/dfu.c deleted file mode 100644 index 9d51ce8faad1..000000000000 --- a/drivers/staging/uwb/i1480/dfu/dfu.c +++ /dev/null @@ -1,198 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Wireless UWB Link 1480 - * Main driver - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Common code for firmware upload used by the USB and PCI version; - * i1480_fw_upload() takes a device descriptor and uses the function - * pointers it provides to upload firmware and prepare the PHY. - * - * As well, provides common functions used by the rest of the code. - */ -#include "i1480-dfu.h" -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/random.h> -#include <linux/export.h> -#include "../../uwb.h" - -/* - * i1480_rceb_check - Check RCEB for expected field values - * @i1480: pointer to device for which RCEB is being checked - * @rceb: RCEB being checked - * @cmd: which command the RCEB is related to - * @context: expected context - * @expected_type: expected event type - * @expected_event: expected event - * - * If @cmd is NULL, do not print error messages, but still return an error - * code. - * - * Return 0 if @rceb matches the expected values, -EINVAL otherwise. - */ -int i1480_rceb_check(const struct i1480 *i1480, const struct uwb_rceb *rceb, - const char *cmd, u8 context, u8 expected_type, - unsigned expected_event) -{ - int result = 0; - struct device *dev = i1480->dev; - if (rceb->bEventContext != context) { - if (cmd) - dev_err(dev, "%s: unexpected context id 0x%02x " - "(expected 0x%02x)\n", cmd, - rceb->bEventContext, context); - result = -EINVAL; - } - if (rceb->bEventType != expected_type) { - if (cmd) - dev_err(dev, "%s: unexpected event type 0x%02x " - "(expected 0x%02x)\n", cmd, - rceb->bEventType, expected_type); - result = -EINVAL; - } - if (le16_to_cpu(rceb->wEvent) != expected_event) { - if (cmd) - dev_err(dev, "%s: unexpected event 0x%04x " - "(expected 0x%04x)\n", cmd, - le16_to_cpu(rceb->wEvent), expected_event); - result = -EINVAL; - } - return result; -} -EXPORT_SYMBOL_GPL(i1480_rceb_check); - - -/* - * Execute a Radio Control Command - * - * Command data has to be in i1480->cmd_buf. - * - * @returns size of the reply data filled in i1480->evt_buf or < 0 errno - * code on error. - */ -ssize_t i1480_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size, - size_t reply_size) -{ - ssize_t result; - struct uwb_rceb *reply = i1480->evt_buf; - struct uwb_rccb *cmd = i1480->cmd_buf; - u16 expected_event = reply->wEvent; - u8 expected_type = reply->bEventType; - u8 context; - - init_completion(&i1480->evt_complete); - i1480->evt_result = -EINPROGRESS; - do { - get_random_bytes(&context, 1); - } while (context == 0x00 || context == 0xff); - cmd->bCommandContext = context; - result = i1480->cmd(i1480, cmd_name, cmd_size); - if (result < 0) - goto error; - /* wait for the callback to report a event was received */ - result = wait_for_completion_interruptible_timeout( - &i1480->evt_complete, HZ); - if (result == 0) { - result = -ETIMEDOUT; - goto error; - } - if (result < 0) - goto error; - result = i1480->evt_result; - if (result < 0) { - dev_err(i1480->dev, "%s: command reply reception failed: %zd\n", - cmd_name, result); - goto error; - } - /* - * Firmware versions >= 1.4.12224 for IOGear GUWA100U generate a - * spurious notification after firmware is downloaded. So check whether - * the receibed RCEB is such notification before assuming that the - * command has failed. - */ - if (i1480_rceb_check(i1480, i1480->evt_buf, NULL, - 0, 0xfd, 0x0022) == 0) { - /* Now wait for the actual RCEB for this command. */ - result = i1480->wait_init_done(i1480); - if (result < 0) - goto error; - result = i1480->evt_result; - } - if (result != reply_size) { - dev_err(i1480->dev, "%s returned only %zu bytes, %zu expected\n", - cmd_name, result, reply_size); - result = -EINVAL; - goto error; - } - /* Verify we got the right event in response */ - result = i1480_rceb_check(i1480, i1480->evt_buf, cmd_name, context, - expected_type, expected_event); -error: - return result; -} -EXPORT_SYMBOL_GPL(i1480_cmd); - - -static -int i1480_print_state(struct i1480 *i1480) -{ - int result; - u32 *buf = (u32 *) i1480->cmd_buf; - - result = i1480->read(i1480, 0x80080000, 2 * sizeof(*buf)); - if (result < 0) { - dev_err(i1480->dev, "cannot read U & L states: %d\n", result); - goto error; - } - dev_info(i1480->dev, "state U 0x%08x, L 0x%08x\n", buf[0], buf[1]); -error: - return result; -} - - -/* - * PCI probe, firmware uploader - * - * _mac_fw_upload() will call rc_setup(), which needs an rc_release(). - */ -int i1480_fw_upload(struct i1480 *i1480) -{ - int result; - - result = i1480_pre_fw_upload(i1480); /* PHY pre fw */ - if (result < 0 && result != -ENOENT) { - i1480_print_state(i1480); - goto error; - } - result = i1480_mac_fw_upload(i1480); /* MAC fw */ - if (result < 0) { - if (result == -ENOENT) - dev_err(i1480->dev, "Cannot locate MAC FW file '%s'\n", - i1480->mac_fw_name); - else - i1480_print_state(i1480); - goto error; - } - result = i1480_phy_fw_upload(i1480); /* PHY fw */ - if (result < 0 && result != -ENOENT) { - i1480_print_state(i1480); - goto error_rc_release; - } - /* - * FIXME: find some reliable way to check whether firmware is running - * properly. Maybe use some standard request that has no side effects? - */ - dev_info(i1480->dev, "firmware uploaded successfully\n"); -error_rc_release: - if (i1480->rc_release) - i1480->rc_release(i1480); - result = 0; -error: - return result; -} -EXPORT_SYMBOL_GPL(i1480_fw_upload); diff --git a/drivers/staging/uwb/i1480/dfu/i1480-dfu.h b/drivers/staging/uwb/i1480/dfu/i1480-dfu.h deleted file mode 100644 index b21d058ecc23..000000000000 --- a/drivers/staging/uwb/i1480/dfu/i1480-dfu.h +++ /dev/null @@ -1,246 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * i1480 Device Firmware Upload - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This driver is the firmware uploader for the Intel Wireless UWB - * Link 1480 device (both in the USB and PCI incarnations). - * - * The process is quite simple: we stop the device, write the firmware - * to its memory and then restart it. Wait for the device to let us - * know it is done booting firmware. Ready. - * - * We might have to upload before or after a phy firmware (which might - * be done in two methods, using a normal firmware image or through - * the MPI port). - * - * Because USB and PCI use common methods, we just make ops out of the - * common operations (read, write, wait_init_done and cmd) and - * implement them in usb.c and pci.c. - * - * The flow is (some parts omitted): - * - * i1480_{usb,pci}_probe() On enumerate/discovery - * i1480_fw_upload() - * i1480_pre_fw_upload() - * __mac_fw_upload() - * fw_hdrs_load() - * mac_fw_hdrs_push() - * i1480->write() [i1480_{usb,pci}_write()] - * i1480_fw_cmp() - * i1480->read() [i1480_{usb,pci}_read()] - * i1480_mac_fw_upload() - * __mac_fw_upload() - * i1480->setup(() - * i1480->wait_init_done() - * i1480_cmd_reset() - * i1480->cmd() [i1480_{usb,pci}_cmd()] - * ... - * i1480_phy_fw_upload() - * request_firmware() - * i1480_mpi_write() - * i1480->cmd() [i1480_{usb,pci}_cmd()] - * - * Once the probe function enumerates the device and uploads the - * firmware, we just exit with -ENODEV, as we don't really want to - * attach to the device. - */ -#ifndef __i1480_DFU_H__ -#define __i1480_DFU_H__ - -#include <linux/types.h> -#include <linux/completion.h> -#include "../../include/spec.h" - -#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018)) - -#if i1480_FW > 0x00000302 -#define i1480_RCEB_EXTENDED -#endif - -struct uwb_rccb; -struct uwb_rceb; - -/* - * Common firmware upload handlers - * - * Normally you embed this struct in another one specific to your hw. - * - * @write Write to device's memory from buffer. - * @read Read from device's memory to i1480->evt_buf. - * @setup Setup device after basic firmware is uploaded - * @wait_init_done - * Wait for the device to send a notification saying init - * is done. - * @cmd FOP for issuing the command to the hardware. The - * command data is contained in i1480->cmd_buf and the size - * is supplied as an argument. The command replied is put - * in i1480->evt_buf and the size in i1480->evt_result (or if - * an error, a < 0 errno code). - * - * @cmd_buf Memory buffer used to send commands to the device. - * Allocated by the upper layers i1480_fw_upload(). - * Size has to be @buf_size. - * @evt_buf Memory buffer used to place the async notifications - * received by the hw. Allocated by the upper layers - * i1480_fw_upload(). - * Size has to be @buf_size. - * @cmd_complete - * Low level driver uses this to notify code waiting afor - * an event that the event has arrived and data is in - * i1480->evt_buf (and size/result in i1480->evt_result). - * @hw_rev - * Use this value to activate dfu code to support new revisions - * of hardware. i1480_init() sets this to a default value. - * It should be updated by the USB and PCI code. - */ -struct i1480 { - struct device *dev; - - int (*write)(struct i1480 *, u32 addr, const void *, size_t); - int (*read)(struct i1480 *, u32 addr, size_t); - int (*rc_setup)(struct i1480 *); - void (*rc_release)(struct i1480 *); - int (*wait_init_done)(struct i1480 *); - int (*cmd)(struct i1480 *, const char *cmd_name, size_t cmd_size); - const char *pre_fw_name; - const char *mac_fw_name; - const char *mac_fw_name_deprecate; /* FIXME: Will go away */ - const char *phy_fw_name; - u8 hw_rev; - - size_t buf_size; /* size of both evt_buf and cmd_buf */ - void *evt_buf, *cmd_buf; - ssize_t evt_result; - struct completion evt_complete; -}; - -static inline -void i1480_init(struct i1480 *i1480) -{ - i1480->hw_rev = 1; - init_completion(&i1480->evt_complete); -} - -extern int i1480_fw_upload(struct i1480 *); -extern int i1480_pre_fw_upload(struct i1480 *); -extern int i1480_mac_fw_upload(struct i1480 *); -extern int i1480_phy_fw_upload(struct i1480 *); -extern ssize_t i1480_cmd(struct i1480 *, const char *, size_t, size_t); -extern int i1480_rceb_check(const struct i1480 *, - const struct uwb_rceb *, const char *, u8, - u8, unsigned); - -enum { - /* Vendor specific command type */ - i1480_CET_VS1 = 0xfd, - /* i1480 commands */ - i1480_CMD_SET_IP_MAS = 0x000e, - i1480_CMD_GET_MAC_PHY_INFO = 0x0003, - i1480_CMD_MPI_WRITE = 0x000f, - i1480_CMD_MPI_READ = 0x0010, - /* i1480 events */ -#if i1480_FW > 0x00000302 - i1480_EVT_CONFIRM = 0x0002, - i1480_EVT_RM_INIT_DONE = 0x0101, - i1480_EVT_DEV_ADD = 0x0103, - i1480_EVT_DEV_RM = 0x0104, - i1480_EVT_DEV_ID_CHANGE = 0x0105, - i1480_EVT_GET_MAC_PHY_INFO = i1480_CMD_GET_MAC_PHY_INFO, -#else - i1480_EVT_CONFIRM = 0x0002, - i1480_EVT_RM_INIT_DONE = 0x0101, - i1480_EVT_DEV_ADD = 0x0103, - i1480_EVT_DEV_RM = 0x0104, - i1480_EVT_DEV_ID_CHANGE = 0x0105, - i1480_EVT_GET_MAC_PHY_INFO = i1480_EVT_CONFIRM, -#endif -}; - - -struct i1480_evt_confirm { - struct uwb_rceb rceb; -#ifdef i1480_RCEB_EXTENDED - __le16 wParamLength; -#endif - u8 bResultCode; -} __attribute__((packed)); - - -struct i1480_rceb { - struct uwb_rceb rceb; -#ifdef i1480_RCEB_EXTENDED - __le16 wParamLength; -#endif -} __attribute__((packed)); - - -/** - * Get MAC & PHY Information confirm event structure - * - * Confirm event returned by the command. - */ -struct i1480_evt_confirm_GMPI { -#if i1480_FW > 0x00000302 - struct uwb_rceb rceb; - __le16 wParamLength; - __le16 status; - u8 mac_addr[6]; /* EUI-64 bit IEEE address [still 8 bytes?] */ - u8 dev_addr[2]; - __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ - u8 hw_rev; - u8 phy_vendor; - u8 phy_rev; /* major v = >> 8; minor = v & 0xff */ - __le16 mac_caps; - u8 phy_caps[3]; - u8 key_stores; - __le16 mcast_addr_stores; - u8 sec_mode_supported; -#else - struct uwb_rceb rceb; - u8 status; - u8 mac_addr[8]; /* EUI-64 bit IEEE address [still 8 bytes?] */ - u8 dev_addr[2]; - __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ - __le16 phy_fw_rev; /* major v = >> 8; minor = v & 0xff */ - __le16 mac_caps; - u8 phy_caps; - u8 key_stores; - __le16 mcast_addr_stores; - u8 sec_mode_supported; -#endif -} __attribute__((packed)); - - -struct i1480_cmd_mpi_write { - struct uwb_rccb rccb; - __le16 size; - u8 data[]; -}; - - -struct i1480_cmd_mpi_read { - struct uwb_rccb rccb; - __le16 size; - struct { - u8 page, offset; - } __attribute__((packed)) data[]; -} __attribute__((packed)); - - -struct i1480_evt_mpi_read { - struct uwb_rceb rceb; -#ifdef i1480_RCEB_EXTENDED - __le16 wParamLength; -#endif - u8 bResultCode; - __le16 size; - struct { - u8 page, offset, value; - } __attribute__((packed)) data[]; -} __attribute__((packed)); - - -#endif /* #ifndef __i1480_DFU_H__ */ diff --git a/drivers/staging/uwb/i1480/dfu/mac.c b/drivers/staging/uwb/i1480/dfu/mac.c deleted file mode 100644 index 6e4d6c9cecf5..000000000000 --- a/drivers/staging/uwb/i1480/dfu/mac.c +++ /dev/null @@ -1,496 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Wireless UWB Link 1480 - * MAC Firmware upload implementation - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Implementation of the code for parsing the firmware file (extract - * the headers and binary code chunks) in the fw_*() functions. The - * code to upload pre and mac firmwares is the same, so it uses a - * common entry point in __mac_fw_upload(), which uses the i1480 - * function pointers to push the firmware to the device. - */ -#include <linux/delay.h> -#include <linux/firmware.h> -#include <linux/slab.h> -#include "../../uwb.h" -#include "i1480-dfu.h" - -/* - * Descriptor for a continuous segment of MAC fw data - */ -struct fw_hdr { - unsigned long address; - size_t length; - const u32 *bin; - struct fw_hdr *next; -}; - - -/* Free a chain of firmware headers */ -static -void fw_hdrs_free(struct fw_hdr *hdr) -{ - struct fw_hdr *next; - - while (hdr) { - next = hdr->next; - kfree(hdr); - hdr = next; - } -} - - -/* Fill a firmware header descriptor from a memory buffer */ -static -int fw_hdr_load(struct i1480 *i1480, struct fw_hdr *hdr, unsigned hdr_cnt, - const char *_data, const u32 *data_itr, const u32 *data_top) -{ - size_t hdr_offset = (const char *) data_itr - _data; - size_t remaining_size = (void *) data_top - (void *) data_itr; - if (data_itr + 2 > data_top) { - dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in header at " - "offset %zu, limit %zu\n", - hdr_cnt, hdr_offset, - (const char *) data_itr + 2 - _data, - (const char *) data_top - _data); - return -EINVAL; - } - hdr->next = NULL; - hdr->address = le32_to_cpu(*data_itr++); - hdr->length = le32_to_cpu(*data_itr++); - hdr->bin = data_itr; - if (hdr->length > remaining_size) { - dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in data; " - "chunk too long (%zu bytes), only %zu left\n", - hdr_cnt, hdr_offset, hdr->length, remaining_size); - return -EINVAL; - } - return 0; -} - - -/** - * Get a buffer where the firmware is supposed to be and create a - * chain of headers linking them together. - * - * @phdr: where to place the pointer to the first header (headers link - * to the next via the @hdr->next ptr); need to free the whole - * chain when done. - * - * @_data: Pointer to the data buffer. - * - * @_data_size: Size of the data buffer (bytes); data size has to be a - * multiple of 4. Function will fail if not. - * - * Goes over the whole binary blob; reads the first chunk and creates - * a fw hdr from it (which points to where the data is in @_data and - * the length of the chunk); then goes on to the next chunk until - * done. Each header is linked to the next. - */ -static -int fw_hdrs_load(struct i1480 *i1480, struct fw_hdr **phdr, - const char *_data, size_t data_size) -{ - int result; - unsigned hdr_cnt = 0; - u32 *data = (u32 *) _data, *data_itr, *data_top; - struct fw_hdr *hdr, **prev_hdr = phdr; - - result = -EINVAL; - /* Check size is ok and pointer is aligned */ - if (data_size % sizeof(u32) != 0) - goto error; - if ((unsigned long) _data % sizeof(u16) != 0) - goto error; - *phdr = NULL; - data_itr = data; - data_top = (u32 *) (_data + data_size); - while (data_itr < data_top) { - result = -ENOMEM; - hdr = kmalloc(sizeof(*hdr), GFP_KERNEL); - if (hdr == NULL) { - dev_err(i1480->dev, "Cannot allocate fw header " - "for chunk #%u\n", hdr_cnt); - goto error_alloc; - } - result = fw_hdr_load(i1480, hdr, hdr_cnt, - _data, data_itr, data_top); - if (result < 0) - goto error_load; - data_itr += 2 + hdr->length; - *prev_hdr = hdr; - prev_hdr = &hdr->next; - hdr_cnt++; - }; - *prev_hdr = NULL; - return 0; - -error_load: - kfree(hdr); -error_alloc: - fw_hdrs_free(*phdr); -error: - return result; -} - - -/** - * Compares a chunk of fw with one in the devices's memory - * - * @i1480: Device instance - * @hdr: Pointer to the firmware chunk - * @returns: 0 if equal, < 0 errno on error. If > 0, it is the offset - * where the difference was found (plus one). - * - * Kind of dirty and simplistic, but does the trick in both the PCI - * and USB version. We do a quick[er] memcmp(), and if it fails, we do - * a byte-by-byte to find the offset. - */ -static -ssize_t i1480_fw_cmp(struct i1480 *i1480, struct fw_hdr *hdr) -{ - ssize_t result = 0; - u32 src_itr = 0, cnt; - size_t size = hdr->length*sizeof(hdr->bin[0]); - size_t chunk_size; - u8 *bin = (u8 *) hdr->bin; - - while (size > 0) { - chunk_size = size < i1480->buf_size ? size : i1480->buf_size; - result = i1480->read(i1480, hdr->address + src_itr, chunk_size); - if (result < 0) { - dev_err(i1480->dev, "error reading for verification: " - "%zd\n", result); - goto error; - } - if (memcmp(i1480->cmd_buf, bin + src_itr, result)) { - u8 *buf = i1480->cmd_buf; - for (cnt = 0; cnt < result; cnt++) - if (bin[src_itr + cnt] != buf[cnt]) { - dev_err(i1480->dev, "byte failed at " - "src_itr %u cnt %u [0x%02x " - "vs 0x%02x]\n", src_itr, cnt, - bin[src_itr + cnt], buf[cnt]); - result = src_itr + cnt + 1; - goto cmp_failed; - } - } - src_itr += result; - size -= result; - } - result = 0; -error: -cmp_failed: - return result; -} - - -/** - * Writes firmware headers to the device. - * - * @prd: PRD instance - * @hdr: Processed firmware - * @returns: 0 if ok, < 0 errno on error. - */ -static -int mac_fw_hdrs_push(struct i1480 *i1480, struct fw_hdr *hdr, - const char *fw_name, const char *fw_tag) -{ - struct device *dev = i1480->dev; - ssize_t result = 0; - struct fw_hdr *hdr_itr; - int verif_retry_count; - - /* Now, header by header, push them to the hw */ - for (hdr_itr = hdr; hdr_itr != NULL; hdr_itr = hdr_itr->next) { - verif_retry_count = 0; -retry: - dev_dbg(dev, "fw chunk (%zu @ 0x%08lx)\n", - hdr_itr->length * sizeof(hdr_itr->bin[0]), - hdr_itr->address); - result = i1480->write(i1480, hdr_itr->address, hdr_itr->bin, - hdr_itr->length*sizeof(hdr_itr->bin[0])); - if (result < 0) { - dev_err(dev, "%s fw '%s': write failed (%zuB @ 0x%lx):" - " %zd\n", fw_tag, fw_name, - hdr_itr->length * sizeof(hdr_itr->bin[0]), - hdr_itr->address, result); - break; - } - result = i1480_fw_cmp(i1480, hdr_itr); - if (result < 0) { - dev_err(dev, "%s fw '%s': verification read " - "failed (%zuB @ 0x%lx): %zd\n", - fw_tag, fw_name, - hdr_itr->length * sizeof(hdr_itr->bin[0]), - hdr_itr->address, result); - break; - } - if (result > 0) { /* Offset where it failed + 1 */ - result--; - dev_err(dev, "%s fw '%s': WARNING: verification " - "failed at 0x%lx: retrying\n", - fw_tag, fw_name, hdr_itr->address + result); - if (++verif_retry_count < 3) - goto retry; /* write this block again! */ - dev_err(dev, "%s fw '%s': verification failed at 0x%lx: " - "tried %d times\n", fw_tag, fw_name, - hdr_itr->address + result, verif_retry_count); - result = -EINVAL; - break; - } - } - return result; -} - - -/** Puts the device in firmware upload mode.*/ -static -int mac_fw_upload_enable(struct i1480 *i1480) -{ - int result; - u32 reg = 0x800000c0; - u32 *buffer = (u32 *)i1480->cmd_buf; - - if (i1480->hw_rev > 1) - reg = 0x8000d0d4; - result = i1480->read(i1480, reg, sizeof(u32)); - if (result < 0) - goto error_cmd; - *buffer &= ~i1480_FW_UPLOAD_MODE_MASK; - result = i1480->write(i1480, reg, buffer, sizeof(u32)); - if (result < 0) - goto error_cmd; - return 0; -error_cmd: - dev_err(i1480->dev, "can't enable fw upload mode: %d\n", result); - return result; -} - - -/** Gets the device out of firmware upload mode. */ -static -int mac_fw_upload_disable(struct i1480 *i1480) -{ - int result; - u32 reg = 0x800000c0; - u32 *buffer = (u32 *)i1480->cmd_buf; - - if (i1480->hw_rev > 1) - reg = 0x8000d0d4; - result = i1480->read(i1480, reg, sizeof(u32)); - if (result < 0) - goto error_cmd; - *buffer |= i1480_FW_UPLOAD_MODE_MASK; - result = i1480->write(i1480, reg, buffer, sizeof(u32)); - if (result < 0) - goto error_cmd; - return 0; -error_cmd: - dev_err(i1480->dev, "can't disable fw upload mode: %d\n", result); - return result; -} - - - -/** - * Generic function for uploading a MAC firmware. - * - * @i1480: Device instance - * @fw_name: Name of firmware file to upload. - * @fw_tag: Name of the firmware type (for messages) - * [eg: MAC, PRE] - * @do_wait: Wait for device to emit initialization done message (0 - * for PRE fws, 1 for MAC fws). - * @returns: 0 if ok, < 0 errno on error. - */ -static -int __mac_fw_upload(struct i1480 *i1480, const char *fw_name, - const char *fw_tag) -{ - int result; - const struct firmware *fw; - struct fw_hdr *fw_hdrs; - - result = request_firmware(&fw, fw_name, i1480->dev); - if (result < 0) /* Up to caller to complain on -ENOENT */ - goto out; - result = fw_hdrs_load(i1480, &fw_hdrs, fw->data, fw->size); - if (result < 0) { - dev_err(i1480->dev, "%s fw '%s': failed to parse firmware " - "file: %d\n", fw_tag, fw_name, result); - goto out_release; - } - result = mac_fw_upload_enable(i1480); - if (result < 0) - goto out_hdrs_release; - result = mac_fw_hdrs_push(i1480, fw_hdrs, fw_name, fw_tag); - mac_fw_upload_disable(i1480); -out_hdrs_release: - if (result >= 0) - dev_info(i1480->dev, "%s fw '%s': uploaded\n", fw_tag, fw_name); - else - dev_err(i1480->dev, "%s fw '%s': failed to upload (%d), " - "power cycle device\n", fw_tag, fw_name, result); - fw_hdrs_free(fw_hdrs); -out_release: - release_firmware(fw); -out: - return result; -} - - -/** - * Upload a pre-PHY firmware - * - */ -int i1480_pre_fw_upload(struct i1480 *i1480) -{ - int result; - result = __mac_fw_upload(i1480, i1480->pre_fw_name, "PRE"); - if (result == 0) - msleep(400); - return result; -} - - -/** - * Reset a the MAC and PHY - * - * @i1480: Device's instance - * @returns: 0 if ok, < 0 errno code on error - * - * We put the command on kmalloc'ed memory as some arches cannot do - * USB from the stack. The reply event is copied from an stage buffer, - * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. - * - * We issue the reset to make sure the UWB controller reinits the PHY; - * this way we can now if the PHY init went ok. - */ -static -int i1480_cmd_reset(struct i1480 *i1480) -{ - int result; - struct uwb_rccb *cmd = (void *) i1480->cmd_buf; - struct i1480_evt_reset { - struct uwb_rceb rceb; - u8 bResultCode; - } __attribute__((packed)) *reply = (void *) i1480->evt_buf; - - result = -ENOMEM; - cmd->bCommandType = UWB_RC_CET_GENERAL; - cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET); - reply->rceb.bEventType = UWB_RC_CET_GENERAL; - reply->rceb.wEvent = UWB_RC_CMD_RESET; - result = i1480_cmd(i1480, "RESET", sizeof(*cmd), sizeof(*reply)); - if (result < 0) - goto out; - if (reply->bResultCode != UWB_RC_RES_SUCCESS) { - dev_err(i1480->dev, "RESET: command execution failed: %u\n", - reply->bResultCode); - result = -EIO; - } -out: - return result; - -} - - -/* Wait for the MAC FW to start running */ -static -int i1480_fw_is_running_q(struct i1480 *i1480) -{ - int cnt = 0; - int result; - u32 *val = (u32 *) i1480->cmd_buf; - - for (cnt = 0; cnt < 10; cnt++) { - msleep(100); - result = i1480->read(i1480, 0x80080000, 4); - if (result < 0) { - dev_err(i1480->dev, "Can't read 0x8008000: %d\n", result); - goto out; - } - if (*val == 0x55555555UL) /* fw running? cool */ - goto out; - } - dev_err(i1480->dev, "Timed out waiting for fw to start\n"); - result = -ETIMEDOUT; -out: - return result; - -} - - -/** - * Upload MAC firmware, wait for it to start - * - * @i1480: Device instance - * @fw_name: Name of the file that contains the firmware - * - * This has to be called after the pre fw has been uploaded (if - * there is any). - */ -int i1480_mac_fw_upload(struct i1480 *i1480) -{ - int result = 0, deprecated_name = 0; - struct i1480_rceb *rcebe = (void *) i1480->evt_buf; - - result = __mac_fw_upload(i1480, i1480->mac_fw_name, "MAC"); - if (result == -ENOENT) { - result = __mac_fw_upload(i1480, i1480->mac_fw_name_deprecate, - "MAC"); - deprecated_name = 1; - } - if (result < 0) - return result; - if (deprecated_name == 1) - dev_warn(i1480->dev, - "WARNING: firmware file name %s is deprecated, " - "please rename to %s\n", - i1480->mac_fw_name_deprecate, i1480->mac_fw_name); - result = i1480_fw_is_running_q(i1480); - if (result < 0) - goto error_fw_not_running; - result = i1480->rc_setup ? i1480->rc_setup(i1480) : 0; - if (result < 0) { - dev_err(i1480->dev, "Cannot setup after MAC fw upload: %d\n", - result); - goto error_setup; - } - result = i1480->wait_init_done(i1480); /* wait init'on */ - if (result < 0) { - dev_err(i1480->dev, "MAC fw '%s': Initialization timed out " - "(%d)\n", i1480->mac_fw_name, result); - goto error_init_timeout; - } - /* verify we got the right initialization done event */ - if (i1480->evt_result != sizeof(*rcebe)) { - dev_err(i1480->dev, "MAC fw '%s': initialization event returns " - "wrong size (%zu bytes vs %zu needed)\n", - i1480->mac_fw_name, i1480->evt_result, sizeof(*rcebe)); - goto error_size; - } - result = -EIO; - if (i1480_rceb_check(i1480, &rcebe->rceb, NULL, 0, i1480_CET_VS1, - i1480_EVT_RM_INIT_DONE) < 0) { - dev_err(i1480->dev, "wrong initialization event 0x%02x/%04x/%02x " - "received; expected 0x%02x/%04x/00\n", - rcebe->rceb.bEventType, le16_to_cpu(rcebe->rceb.wEvent), - rcebe->rceb.bEventContext, i1480_CET_VS1, - i1480_EVT_RM_INIT_DONE); - goto error_init_timeout; - } - result = i1480_cmd_reset(i1480); - if (result < 0) - dev_err(i1480->dev, "MAC fw '%s': MBOA reset failed (%d)\n", - i1480->mac_fw_name, result); -error_fw_not_running: -error_init_timeout: -error_size: -error_setup: - return result; -} diff --git a/drivers/staging/uwb/i1480/dfu/phy.c b/drivers/staging/uwb/i1480/dfu/phy.c deleted file mode 100644 index 13512c7dda0b..000000000000 --- a/drivers/staging/uwb/i1480/dfu/phy.c +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Wireless UWB Link 1480 - * PHY parameters upload - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Code for uploading the PHY parameters to the PHY through the UWB - * Radio Control interface. - * - * We just send the data through the MPI interface using HWA-like - * commands and then reset the PHY to make sure it is ok. - */ -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/firmware.h> -#include "../../../wusbcore/include/wusb.h" -#include "i1480-dfu.h" - - -/** - * Write a value array to an address of the MPI interface - * - * @i1480: Device descriptor - * @data: Data array to write - * @size: Size of the data array - * @returns: 0 if ok, < 0 errno code on error. - * - * The data array is organized into pairs: - * - * ADDRESS VALUE - * - * ADDRESS is BE 16 bit unsigned, VALUE 8 bit unsigned. Size thus has - * to be a multiple of three. - */ -static -int i1480_mpi_write(struct i1480 *i1480, const void *data, size_t size) -{ - int result; - struct i1480_cmd_mpi_write *cmd = i1480->cmd_buf; - struct i1480_evt_confirm *reply = i1480->evt_buf; - - BUG_ON(size > 480); - result = -ENOMEM; - cmd->rccb.bCommandType = i1480_CET_VS1; - cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_WRITE); - cmd->size = cpu_to_le16(size); - memcpy(cmd->data, data, size); - reply->rceb.bEventType = i1480_CET_VS1; - reply->rceb.wEvent = i1480_CMD_MPI_WRITE; - result = i1480_cmd(i1480, "MPI-WRITE", sizeof(*cmd) + size, sizeof(*reply)); - if (result < 0) - goto out; - if (reply->bResultCode != UWB_RC_RES_SUCCESS) { - dev_err(i1480->dev, "MPI-WRITE: command execution failed: %d\n", - reply->bResultCode); - result = -EIO; - } -out: - return result; -} - - -/** - * Read a value array to from an address of the MPI interface - * - * @i1480: Device descriptor - * @data: where to place the read array - * @srcaddr: Where to read from - * @size: Size of the data read array - * @returns: 0 if ok, < 0 errno code on error. - * - * The command data array is organized into pairs ADDR0 ADDR1..., and - * the returned data in ADDR0 VALUE0 ADDR1 VALUE1... - * - * We generate the command array to be a sequential read and then - * rearrange the result. - * - * We use the i1480->cmd_buf for the command, i1480->evt_buf for the reply. - * - * As the reply has to fit in 512 bytes (i1480->evt_buffer), the max amount - * of values we can read is (512 - sizeof(*reply)) / 3 - */ -static -int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size) -{ - int result; - struct i1480_cmd_mpi_read *cmd = i1480->cmd_buf; - struct i1480_evt_mpi_read *reply = i1480->evt_buf; - unsigned cnt; - - memset(i1480->cmd_buf, 0x69, 512); - memset(i1480->evt_buf, 0x69, 512); - - BUG_ON(size > (i1480->buf_size - sizeof(*reply)) / 3); - result = -ENOMEM; - cmd->rccb.bCommandType = i1480_CET_VS1; - cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_READ); - cmd->size = cpu_to_le16(3*size); - for (cnt = 0; cnt < size; cnt++) { - cmd->data[cnt].page = (srcaddr + cnt) >> 8; - cmd->data[cnt].offset = (srcaddr + cnt) & 0xff; - } - reply->rceb.bEventType = i1480_CET_VS1; - reply->rceb.wEvent = i1480_CMD_MPI_READ; - result = i1480_cmd(i1480, "MPI-READ", sizeof(*cmd) + 2*size, - sizeof(*reply) + 3*size); - if (result < 0) - goto out; - if (reply->bResultCode != UWB_RC_RES_SUCCESS) { - dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n", - reply->bResultCode); - result = -EIO; - goto out; - } - for (cnt = 0; cnt < size; cnt++) { - if (reply->data[cnt].page != (srcaddr + cnt) >> 8) - dev_err(i1480->dev, "MPI-READ: page inconsistency at " - "index %u: expected 0x%02x, got 0x%02x\n", cnt, - (srcaddr + cnt) >> 8, reply->data[cnt].page); - if (reply->data[cnt].offset != ((srcaddr + cnt) & 0x00ff)) - dev_err(i1480->dev, "MPI-READ: offset inconsistency at " - "index %u: expected 0x%02x, got 0x%02x\n", cnt, - (srcaddr + cnt) & 0x00ff, - reply->data[cnt].offset); - data[cnt] = reply->data[cnt].value; - } - result = 0; -out: - return result; -} - - -/** - * Upload a PHY firmware, wait for it to start - * - * @i1480: Device instance - * @fw_name: Name of the file that contains the firmware - * - * We assume the MAC fw is up and running. This means we can use the - * MPI interface to write the PHY firmware. Once done, we issue an - * MBOA Reset, which will force the MAC to reset and reinitialize the - * PHY. If that works, we are ready to go. - * - * Max packet size for the MPI write is 512, so the max buffer is 480 - * (which gives us 160 byte triads of MSB, LSB and VAL for the data). - */ -int i1480_phy_fw_upload(struct i1480 *i1480) -{ - int result; - const struct firmware *fw; - const char *data_itr, *data_top; - const size_t MAX_BLK_SIZE = 480; /* 160 triads */ - size_t data_size; - u8 phy_stat; - - result = request_firmware(&fw, i1480->phy_fw_name, i1480->dev); - if (result < 0) - goto out; - /* Loop writing data in chunks as big as possible until done. */ - for (data_itr = fw->data, data_top = data_itr + fw->size; - data_itr < data_top; data_itr += MAX_BLK_SIZE) { - data_size = min(MAX_BLK_SIZE, (size_t) (data_top - data_itr)); - result = i1480_mpi_write(i1480, data_itr, data_size); - if (result < 0) - goto error_mpi_write; - } - /* Read MPI page 0, offset 6; if 0, PHY was initialized correctly. */ - result = i1480_mpi_read(i1480, &phy_stat, 0x0006, 1); - if (result < 0) { - dev_err(i1480->dev, "PHY: can't get status: %d\n", result); - goto error_mpi_status; - } - if (phy_stat != 0) { - result = -ENODEV; - dev_info(i1480->dev, "error, PHY not ready: %u\n", phy_stat); - goto error_phy_status; - } - dev_info(i1480->dev, "PHY fw '%s': uploaded\n", i1480->phy_fw_name); -error_phy_status: -error_mpi_status: -error_mpi_write: - release_firmware(fw); - if (result < 0) - dev_err(i1480->dev, "PHY fw '%s': failed to upload (%d), " - "power cycle device\n", i1480->phy_fw_name, result); -out: - return result; -} diff --git a/drivers/staging/uwb/i1480/dfu/usb.c b/drivers/staging/uwb/i1480/dfu/usb.c deleted file mode 100644 index d41086bdd783..000000000000 --- a/drivers/staging/uwb/i1480/dfu/usb.c +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Wireless UWB Link 1480 - * USB SKU firmware upload implementation - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This driver will prepare the i1480 device to behave as a real - * Wireless USB HWA adaptor by uploading the firmware. - * - * When the device is connected or driver is loaded, i1480_usb_probe() - * is called--this will allocate and initialize the device structure, - * fill in the pointers to the common functions (read, write, - * wait_init_done and cmd for HWA command execution) and once that is - * done, call the common firmware uploading routine. Then clean up and - * return -ENODEV, as we don't attach to the device. - * - * The rest are the basic ops we implement that the fw upload code - * uses to do its job. All the ops in the common code are i1480->NAME, - * the functions are i1480_usb_NAME(). - */ -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include "../../uwb.h" -#include "../../../wusbcore/include/wusb.h" -#include "../../../wusbcore/include/wusb-wa.h" -#include "i1480-dfu.h" - -struct i1480_usb { - struct i1480 i1480; - struct usb_device *usb_dev; - struct usb_interface *usb_iface; - struct urb *neep_urb; /* URB for reading from EP1 */ -}; - - -static -void i1480_usb_init(struct i1480_usb *i1480_usb) -{ - i1480_init(&i1480_usb->i1480); -} - - -static -int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface) -{ - struct usb_device *usb_dev = interface_to_usbdev(iface); - int result = -ENOMEM; - - i1480_usb->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ - i1480_usb->usb_iface = usb_get_intf(iface); - usb_set_intfdata(iface, i1480_usb); /* Bind the driver to iface0 */ - i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL); - if (i1480_usb->neep_urb == NULL) - goto error; - return 0; - -error: - usb_set_intfdata(iface, NULL); - usb_put_intf(iface); - usb_put_dev(usb_dev); - return result; -} - - -static -void i1480_usb_destroy(struct i1480_usb *i1480_usb) -{ - usb_kill_urb(i1480_usb->neep_urb); - usb_free_urb(i1480_usb->neep_urb); - usb_set_intfdata(i1480_usb->usb_iface, NULL); - usb_put_intf(i1480_usb->usb_iface); - usb_put_dev(i1480_usb->usb_dev); -} - - -/** - * Write a buffer to a memory address in the i1480 device - * - * @i1480: i1480 instance - * @memory_address: - * Address where to write the data buffer to. - * @buffer: Buffer to the data - * @size: Size of the buffer [has to be < 512]. - * @returns: 0 if ok, < 0 errno code on error. - * - * Data buffers to USB cannot be on the stack or in vmalloc'ed areas, - * so we copy it to the local i1480 buffer before proceeding. In any - * case, we have a max size we can send. - */ -static -int i1480_usb_write(struct i1480 *i1480, u32 memory_address, - const void *buffer, size_t size) -{ - int result = 0; - struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); - size_t buffer_size, itr = 0; - - BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ - while (size > 0) { - buffer_size = size < i1480->buf_size ? size : i1480->buf_size; - memcpy(i1480->cmd_buf, buffer + itr, buffer_size); - result = usb_control_msg( - i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), - 0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - memory_address, (memory_address >> 16), - i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */); - if (result < 0) - break; - itr += result; - memory_address += result; - size -= result; - } - return result; -} - - -/** - * Read a block [max size 512] of the device's memory to @i1480's buffer. - * - * @i1480: i1480 instance - * @memory_address: - * Address where to read from. - * @size: Size to read. Smaller than or equal to 512. - * @returns: >= 0 number of bytes written if ok, < 0 errno code on error. - * - * NOTE: if the memory address or block is incorrect, you might get a - * stall or a different memory read. Caller has to verify the - * memory address and size passed back in the @neh structure. - */ -static -int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size) -{ - ssize_t result = 0, bytes = 0; - size_t itr, read_size = i1480->buf_size; - struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); - - BUG_ON(size > i1480->buf_size); - BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ - BUG_ON(read_size > 512); - - if (addr >= 0x8000d200 && addr < 0x8000d400) /* Yeah, HW quirk */ - read_size = 4; - - for (itr = 0; itr < size; itr += read_size) { - size_t itr_addr = addr + itr; - size_t itr_size = min(read_size, size - itr); - result = usb_control_msg( - i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0), - 0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - itr_addr, (itr_addr >> 16), - i1480->cmd_buf + itr, itr_size, - 100 /* FIXME: arbitrary */); - if (result < 0) { - dev_err(i1480->dev, "%s: USB read error: %zd\n", - __func__, result); - goto out; - } - if (result != itr_size) { - result = -EIO; - dev_err(i1480->dev, - "%s: partial read got only %zu bytes vs %zu expected\n", - __func__, result, itr_size); - goto out; - } - bytes += result; - } - result = bytes; -out: - return result; -} - - -/** - * Callback for reads on the notification/event endpoint - * - * Just enables the completion read handler. - */ -static -void i1480_usb_neep_cb(struct urb *urb) -{ - struct i1480 *i1480 = urb->context; - struct device *dev = i1480->dev; - - switch (urb->status) { - case 0: - break; - case -ECONNRESET: /* Not an error, but a controlled situation; */ - case -ENOENT: /* (we killed the URB)...so, no broadcast */ - dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status); - break; - case -ESHUTDOWN: /* going away! */ - dev_dbg(dev, "NEEP: down %d\n", urb->status); - break; - default: - dev_err(dev, "NEEP: unknown status %d\n", urb->status); - break; - } - i1480->evt_result = urb->actual_length; - complete(&i1480->evt_complete); - return; -} - - -/** - * Wait for the MAC FW to initialize - * - * MAC FW sends a 0xfd/0101/00 notification to EP1 when done - * initializing. Get that notification into i1480->evt_buf; upper layer - * will verify it. - * - * Set i1480->evt_result with the result of getting the event or its - * size (if successful). - * - * Delivers the data directly to i1480->evt_buf - */ -static -int i1480_usb_wait_init_done(struct i1480 *i1480) -{ - int result; - struct device *dev = i1480->dev; - struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); - struct usb_endpoint_descriptor *epd; - - init_completion(&i1480->evt_complete); - i1480->evt_result = -EINPROGRESS; - epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev, - usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), - i1480->evt_buf, i1480->buf_size, - i1480_usb_neep_cb, i1480, epd->bInterval); - result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "init done: cannot submit NEEP read: %d\n", - result); - goto error_submit; - } - /* Wait for the USB callback to get the data */ - result = wait_for_completion_interruptible_timeout( - &i1480->evt_complete, HZ); - if (result <= 0) { - result = result == 0 ? -ETIMEDOUT : result; - goto error_wait; - } - usb_kill_urb(i1480_usb->neep_urb); - return 0; - -error_wait: - usb_kill_urb(i1480_usb->neep_urb); -error_submit: - i1480->evt_result = result; - return result; -} - - -/** - * Generic function for issuing commands to the i1480 - * - * @i1480: i1480 instance - * @cmd_name: Name of the command (for error messages) - * @cmd: Pointer to command buffer - * @cmd_size: Size of the command buffer - * @reply: Buffer for the reply event - * @reply_size: Expected size back (including RCEB); the reply buffer - * is assumed to be as big as this. - * @returns: >= 0 size of the returned event data if ok, - * < 0 errno code on error. - * - * Arms the NE handle, issues the command to the device and checks the - * basics of the reply event. - */ -static -int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size) -{ - int result; - struct device *dev = i1480->dev; - struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); - struct usb_endpoint_descriptor *epd; - struct uwb_rccb *cmd = i1480->cmd_buf; - u8 iface_no; - - /* Post a read on the notification & event endpoint */ - iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber; - epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb( - i1480_usb->neep_urb, i1480_usb->usb_dev, - usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), - i1480->evt_buf, i1480->buf_size, - i1480_usb_neep_cb, i1480, epd->bInterval); - result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "%s: cannot submit NEEP read: %d\n", - cmd_name, result); - goto error_submit_ep1; - } - /* Now post the command on EP0 */ - result = usb_control_msg( - i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), - WA_EXEC_RC_CMD, - USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, - 0, iface_no, - cmd, cmd_size, - 100 /* FIXME: this is totally arbitrary */); - if (result < 0) { - dev_err(dev, "%s: control request failed: %d\n", - cmd_name, result); - goto error_submit_ep0; - } - return result; - -error_submit_ep0: - usb_kill_urb(i1480_usb->neep_urb); -error_submit_ep1: - return result; -} - - -/* - * Probe a i1480 device for uploading firmware. - * - * We attach only to interface #0, which is the radio control interface. - */ -static -int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(iface); - struct i1480_usb *i1480_usb; - struct i1480 *i1480; - struct device *dev = &iface->dev; - int result; - - result = -ENODEV; - if (iface->cur_altsetting->desc.bInterfaceNumber != 0) { - dev_dbg(dev, "not attaching to iface %d\n", - iface->cur_altsetting->desc.bInterfaceNumber); - goto error; - } - if (iface->num_altsetting > 1 && - le16_to_cpu(udev->descriptor.idProduct) == 0xbabe) { - /* Need altsetting #1 [HW QUIRK] or EP1 won't work */ - result = usb_set_interface(interface_to_usbdev(iface), 0, 1); - if (result < 0) - dev_warn(dev, - "can't set altsetting 1 on iface 0: %d\n", - result); - } - - if (iface->cur_altsetting->desc.bNumEndpoints < 1) - return -ENODEV; - - result = -ENOMEM; - i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL); - if (i1480_usb == NULL) { - dev_err(dev, "Unable to allocate instance\n"); - goto error; - } - i1480_usb_init(i1480_usb); - - i1480 = &i1480_usb->i1480; - i1480->buf_size = 512; - i1480->cmd_buf = kmalloc_array(2, i1480->buf_size, GFP_KERNEL); - if (i1480->cmd_buf == NULL) { - dev_err(dev, "Cannot allocate transfer buffers\n"); - result = -ENOMEM; - goto error_buf_alloc; - } - i1480->evt_buf = i1480->cmd_buf + i1480->buf_size; - - result = i1480_usb_create(i1480_usb, iface); - if (result < 0) { - dev_err(dev, "Cannot create instance: %d\n", result); - goto error_create; - } - - /* setup the fops and upload the firmware */ - i1480->pre_fw_name = "i1480-pre-phy-0.0.bin"; - i1480->mac_fw_name = "i1480-usb-0.0.bin"; - i1480->mac_fw_name_deprecate = "ptc-0.0.bin"; - i1480->phy_fw_name = "i1480-phy-0.0.bin"; - i1480->dev = &iface->dev; - i1480->write = i1480_usb_write; - i1480->read = i1480_usb_read; - i1480->rc_setup = NULL; - i1480->wait_init_done = i1480_usb_wait_init_done; - i1480->cmd = i1480_usb_cmd; - - result = i1480_fw_upload(&i1480_usb->i1480); /* the real thing */ - if (result >= 0) { - usb_reset_device(i1480_usb->usb_dev); - result = -ENODEV; /* we don't want to bind to the iface */ - } - i1480_usb_destroy(i1480_usb); -error_create: - kfree(i1480->cmd_buf); -error_buf_alloc: - kfree(i1480_usb); -error: - return result; -} - -MODULE_FIRMWARE("i1480-pre-phy-0.0.bin"); -MODULE_FIRMWARE("i1480-usb-0.0.bin"); -MODULE_FIRMWARE("i1480-phy-0.0.bin"); - -#define i1480_USB_DEV(v, p) \ -{ \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ - | USB_DEVICE_ID_MATCH_DEV_INFO \ - | USB_DEVICE_ID_MATCH_INT_INFO, \ - .idVendor = (v), \ - .idProduct = (p), \ - .bDeviceClass = 0xff, \ - .bDeviceSubClass = 0xff, \ - .bDeviceProtocol = 0xff, \ - .bInterfaceClass = 0xff, \ - .bInterfaceSubClass = 0xff, \ - .bInterfaceProtocol = 0xff, \ -} - - -/** USB device ID's that we handle */ -static const struct usb_device_id i1480_usb_id_table[] = { - i1480_USB_DEV(0x8086, 0xdf3b), - i1480_USB_DEV(0x15a9, 0x0005), - i1480_USB_DEV(0x07d1, 0x3802), - i1480_USB_DEV(0x050d, 0x305a), - i1480_USB_DEV(0x3495, 0x3007), - {}, -}; -MODULE_DEVICE_TABLE(usb, i1480_usb_id_table); - - -static struct usb_driver i1480_dfu_driver = { - .name = "i1480-dfu-usb", - .id_table = i1480_usb_id_table, - .probe = i1480_usb_probe, - .disconnect = NULL, -}; - -module_usb_driver(i1480_dfu_driver); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/uwb/i1480/i1480-est.c b/drivers/staging/uwb/i1480/i1480-est.c deleted file mode 100644 index 106e0a44b138..000000000000 --- a/drivers/staging/uwb/i1480/i1480-est.c +++ /dev/null @@ -1,85 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Wireless UWB Link 1480 - * Event Size tables for Wired Adaptors - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/usb.h> -#include "../uwb.h" -#include "dfu/i1480-dfu.h" - - -/** Event size table for wEvents 0x00XX */ -static struct uwb_est_entry i1480_est_fd00[] = { - /* Anybody expecting this response has to use - * neh->extra_size to specify the real size that will - * come back. */ - [i1480_EVT_CONFIRM] = { .size = sizeof(struct i1480_evt_confirm) }, - [i1480_CMD_SET_IP_MAS] = { .size = sizeof(struct i1480_evt_confirm) }, -#ifdef i1480_RCEB_EXTENDED - [0x09] = { - .size = sizeof(struct i1480_rceb), - .offset = 1 + offsetof(struct i1480_rceb, wParamLength), - }, -#endif -}; - -/** Event size table for wEvents 0x01XX */ -static struct uwb_est_entry i1480_est_fd01[] = { - [0xff & i1480_EVT_RM_INIT_DONE] = { .size = sizeof(struct i1480_rceb) }, - [0xff & i1480_EVT_DEV_ADD] = { .size = sizeof(struct i1480_rceb) + 9 }, - [0xff & i1480_EVT_DEV_RM] = { .size = sizeof(struct i1480_rceb) + 9 }, - [0xff & i1480_EVT_DEV_ID_CHANGE] = { - .size = sizeof(struct i1480_rceb) + 2 }, -}; - -static int __init i1480_est_init(void) -{ - int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, - i1480_est_fd00, - ARRAY_SIZE(i1480_est_fd00)); - if (result < 0) { - printk(KERN_ERR "Can't register EST table fd00: %d\n", result); - return result; - } - result = uwb_est_register(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b, - i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01)); - if (result < 0) { - printk(KERN_ERR "Can't register EST table fd01: %d\n", result); - return result; - } - return 0; -} -module_init(i1480_est_init); - -static void __exit i1480_est_exit(void) -{ - uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, - i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00)); - uwb_est_unregister(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b, - i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01)); -} -module_exit(i1480_est_exit); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("i1480's Vendor Specific Event Size Tables"); -MODULE_LICENSE("GPL"); - -/** - * USB device ID's that we handle - * - * [so we are loaded when this kind device is connected] - */ -static struct usb_device_id __used i1480_est_id_table[] = { - { USB_DEVICE(0x8086, 0xdf3b), }, - { USB_DEVICE(0x8086, 0x0c3b), }, - { }, -}; -MODULE_DEVICE_TABLE(usb, i1480_est_id_table); diff --git a/drivers/staging/uwb/ie-rcv.c b/drivers/staging/uwb/ie-rcv.c deleted file mode 100644 index 51a4706e0dd3..000000000000 --- a/drivers/staging/uwb/ie-rcv.c +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * IE Received notification handling. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/bitmap.h> -#include "uwb-internal.h" - -/* - * Process an incoming IE Received notification. - */ -int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *evt) -{ - int result = -EINVAL; - struct device *dev = &evt->rc->uwb_dev.dev; - struct uwb_rc_evt_ie_rcv *iercv; - - /* Is there enough data to decode it? */ - if (evt->notif.size < sizeof(*iercv)) { - dev_err(dev, "IE Received notification: Not enough data to " - "decode (%zu vs %zu bytes needed)\n", - evt->notif.size, sizeof(*iercv)); - goto error; - } - iercv = container_of(evt->notif.rceb, struct uwb_rc_evt_ie_rcv, rceb); - - dev_dbg(dev, "IE received, element ID=%d\n", iercv->IEData[0]); - - if (iercv->IEData[0] == UWB_RELINQUISH_REQUEST_IE) { - dev_warn(dev, "unhandled Relinquish Request IE\n"); - } - - return 0; -error: - return result; -} diff --git a/drivers/staging/uwb/ie.c b/drivers/staging/uwb/ie.c deleted file mode 100644 index b11678dd0380..000000000000 --- a/drivers/staging/uwb/ie.c +++ /dev/null @@ -1,366 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Information Element Handling - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * Reinette Chatre <reinette.chatre@intel.com> - * - * FIXME: docs - */ - -#include <linux/slab.h> -#include <linux/export.h> -#include "uwb-internal.h" - -/** - * uwb_ie_next - get the next IE in a buffer - * @ptr: start of the buffer containing the IE data - * @len: length of the buffer - * - * Both @ptr and @len are updated so subsequent calls to uwb_ie_next() - * will get the next IE. - * - * NULL is returned (and @ptr and @len will not be updated) if there - * are no more IEs in the buffer or the buffer is too short. - */ -struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len) -{ - struct uwb_ie_hdr *hdr; - size_t ie_len; - - if (*len < sizeof(struct uwb_ie_hdr)) - return NULL; - - hdr = *ptr; - ie_len = sizeof(struct uwb_ie_hdr) + hdr->length; - - if (*len < ie_len) - return NULL; - - *ptr += ie_len; - *len -= ie_len; - - return hdr; -} -EXPORT_SYMBOL_GPL(uwb_ie_next); - -/** - * uwb_ie_dump_hex - print IEs to a character buffer - * @ies: the IEs to print. - * @len: length of all the IEs. - * @buf: the destination buffer. - * @size: size of @buf. - * - * Returns the number of characters written. - */ -int uwb_ie_dump_hex(const struct uwb_ie_hdr *ies, size_t len, - char *buf, size_t size) -{ - void *ptr; - const struct uwb_ie_hdr *ie; - int r = 0; - u8 *d; - - ptr = (void *)ies; - for (;;) { - ie = uwb_ie_next(&ptr, &len); - if (!ie) - break; - - r += scnprintf(buf + r, size - r, "%02x %02x", - (unsigned)ie->element_id, - (unsigned)ie->length); - d = (uint8_t *)ie + sizeof(struct uwb_ie_hdr); - while (d != ptr && r < size) - r += scnprintf(buf + r, size - r, " %02x", (unsigned)*d++); - if (r < size) - buf[r++] = '\n'; - }; - - return r; -} - -/** - * Get the IEs that a radio controller is sending in its beacon - * - * @uwb_rc: UWB Radio Controller - * @returns: Size read from the system - * - * We don't need to lock the uwb_rc's mutex because we don't modify - * anything. Once done with the iedata buffer, call - * uwb_rc_ie_release(iedata). Don't call kfree on it. - */ -static -ssize_t uwb_rc_get_ie(struct uwb_rc *uwb_rc, struct uwb_rc_evt_get_ie **pget_ie) -{ - ssize_t result; - struct device *dev = &uwb_rc->uwb_dev.dev; - struct uwb_rccb *cmd = NULL; - struct uwb_rceb *reply = NULL; - struct uwb_rc_evt_get_ie *get_ie; - - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (cmd == NULL) - return -ENOMEM; - - cmd->bCommandType = UWB_RC_CET_GENERAL; - cmd->wCommand = cpu_to_le16(UWB_RC_CMD_GET_IE); - result = uwb_rc_vcmd(uwb_rc, "GET_IE", cmd, sizeof(*cmd), - UWB_RC_CET_GENERAL, UWB_RC_CMD_GET_IE, - &reply); - kfree(cmd); - if (result < 0) - return result; - - get_ie = container_of(reply, struct uwb_rc_evt_get_ie, rceb); - if (result < sizeof(*get_ie)) { - dev_err(dev, "not enough data returned for decoding GET IE " - "(%zu bytes received vs %zu needed)\n", - result, sizeof(*get_ie)); - return -EINVAL; - } else if (result < sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)) { - dev_err(dev, "not enough data returned for decoding GET IE " - "payload (%zu bytes received vs %zu needed)\n", result, - sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)); - return -EINVAL; - } - - *pget_ie = get_ie; - return result; -} - - -/** - * Replace all IEs currently being transmitted by a device - * - * @cmd: pointer to the SET-IE command with the IEs to set - * @size: size of @buf - */ -int uwb_rc_set_ie(struct uwb_rc *rc, struct uwb_rc_cmd_set_ie *cmd) -{ - int result; - struct device *dev = &rc->uwb_dev.dev; - struct uwb_rc_evt_set_ie reply; - - reply.rceb.bEventType = UWB_RC_CET_GENERAL; - reply.rceb.wEvent = UWB_RC_CMD_SET_IE; - result = uwb_rc_cmd(rc, "SET-IE", &cmd->rccb, - sizeof(*cmd) + le16_to_cpu(cmd->wIELength), - &reply.rceb, sizeof(reply)); - if (result < 0) - goto error_cmd; - else if (result != sizeof(reply)) { - dev_err(dev, "SET-IE: not enough data to decode reply " - "(%d bytes received vs %zu needed)\n", - result, sizeof(reply)); - result = -EIO; - } else if (reply.bResultCode != UWB_RC_RES_SUCCESS) { - dev_err(dev, "SET-IE: command execution failed: %s (%d)\n", - uwb_rc_strerror(reply.bResultCode), reply.bResultCode); - result = -EIO; - } else - result = 0; -error_cmd: - return result; -} - -/* Cleanup the whole IE management subsystem */ -void uwb_rc_ie_init(struct uwb_rc *uwb_rc) -{ - mutex_init(&uwb_rc->ies_mutex); -} - - -/** - * uwb_rc_ie_setup - setup a radio controller's IE manager - * @uwb_rc: the radio controller. - * - * The current set of IEs are obtained from the hardware with a GET-IE - * command (since the radio controller is not yet beaconing this will - * be just the hardware's MAC and PHY Capability IEs). - * - * Returns 0 on success; -ve on an error. - */ -int uwb_rc_ie_setup(struct uwb_rc *uwb_rc) -{ - struct uwb_rc_evt_get_ie *ie_info = NULL; - int capacity; - - capacity = uwb_rc_get_ie(uwb_rc, &ie_info); - if (capacity < 0) - return capacity; - - mutex_lock(&uwb_rc->ies_mutex); - - uwb_rc->ies = (struct uwb_rc_cmd_set_ie *)ie_info; - uwb_rc->ies->rccb.bCommandType = UWB_RC_CET_GENERAL; - uwb_rc->ies->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_IE); - uwb_rc->ies_capacity = capacity; - - mutex_unlock(&uwb_rc->ies_mutex); - - return 0; -} - - -/* Cleanup the whole IE management subsystem */ -void uwb_rc_ie_release(struct uwb_rc *uwb_rc) -{ - kfree(uwb_rc->ies); - uwb_rc->ies = NULL; - uwb_rc->ies_capacity = 0; -} - - -static int uwb_rc_ie_add_one(struct uwb_rc *rc, const struct uwb_ie_hdr *new_ie) -{ - struct uwb_rc_cmd_set_ie *new_ies; - void *ptr, *prev_ie; - struct uwb_ie_hdr *ie; - size_t length, new_ie_len, new_capacity, size, prev_size; - - length = le16_to_cpu(rc->ies->wIELength); - new_ie_len = sizeof(struct uwb_ie_hdr) + new_ie->length; - new_capacity = sizeof(struct uwb_rc_cmd_set_ie) + length + new_ie_len; - - if (new_capacity > rc->ies_capacity) { - new_ies = krealloc(rc->ies, new_capacity, GFP_KERNEL); - if (!new_ies) - return -ENOMEM; - rc->ies = new_ies; - } - - ptr = rc->ies->IEData; - size = length; - for (;;) { - prev_ie = ptr; - prev_size = size; - ie = uwb_ie_next(&ptr, &size); - if (!ie || ie->element_id > new_ie->element_id) - break; - } - - memmove(prev_ie + new_ie_len, prev_ie, prev_size); - memcpy(prev_ie, new_ie, new_ie_len); - rc->ies->wIELength = cpu_to_le16(length + new_ie_len); - - return 0; -} - -/** - * uwb_rc_ie_add - add new IEs to the radio controller's beacon - * @uwb_rc: the radio controller. - * @ies: the buffer containing the new IE or IEs to be added to - * the device's beacon. - * @size: length of all the IEs. - * - * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB - * after the device sent the first beacon that includes the IEs specified - * in the SET IE command. We thus cannot send this command if the device is - * not beaconing. Instead, a SET IE command will be sent later right after - * we start beaconing. - * - * Setting an IE on the device will overwrite all current IEs in device. So - * we take the current IEs being transmitted by the device, insert the - * new one, and call SET IE with all the IEs needed. - * - * Returns 0 on success; or -ENOMEM. - */ -int uwb_rc_ie_add(struct uwb_rc *uwb_rc, - const struct uwb_ie_hdr *ies, size_t size) -{ - int result = 0; - void *ptr; - const struct uwb_ie_hdr *ie; - - mutex_lock(&uwb_rc->ies_mutex); - - ptr = (void *)ies; - for (;;) { - ie = uwb_ie_next(&ptr, &size); - if (!ie) - break; - - result = uwb_rc_ie_add_one(uwb_rc, ie); - if (result < 0) - break; - } - if (result >= 0) { - if (size == 0) { - if (uwb_rc->beaconing != -1) - result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies); - } else - result = -EINVAL; - } - - mutex_unlock(&uwb_rc->ies_mutex); - - return result; -} -EXPORT_SYMBOL_GPL(uwb_rc_ie_add); - - -/* - * Remove an IE from internal cache - * - * We are dealing with our internal IE cache so no need to verify that the - * IEs are valid (it has been done already). - * - * Should be called with ies_mutex held - * - * We do not break out once an IE is found in the cache. It is currently - * possible to have more than one IE with the same ID included in the - * beacon. We don't reallocate, we just mark the size smaller. - */ -static -void uwb_rc_ie_cache_rm(struct uwb_rc *uwb_rc, enum uwb_ie to_remove) -{ - struct uwb_ie_hdr *ie; - size_t len = le16_to_cpu(uwb_rc->ies->wIELength); - void *ptr; - size_t size; - - ptr = uwb_rc->ies->IEData; - size = len; - for (;;) { - ie = uwb_ie_next(&ptr, &size); - if (!ie) - break; - if (ie->element_id == to_remove) { - len -= sizeof(struct uwb_ie_hdr) + ie->length; - memmove(ie, ptr, size); - ptr = ie; - } - } - uwb_rc->ies->wIELength = cpu_to_le16(len); -} - - -/** - * uwb_rc_ie_rm - remove an IE from the radio controller's beacon - * @uwb_rc: the radio controller. - * @element_id: the element ID of the IE to remove. - * - * Only IEs previously added with uwb_rc_ie_add() may be removed. - * - * Returns 0 on success; or -ve the SET-IE command to the radio - * controller failed. - */ -int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id) -{ - int result = 0; - - mutex_lock(&uwb_rc->ies_mutex); - - uwb_rc_ie_cache_rm(uwb_rc, element_id); - - if (uwb_rc->beaconing != -1) - result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies); - - mutex_unlock(&uwb_rc->ies_mutex); - - return result; -} -EXPORT_SYMBOL_GPL(uwb_rc_ie_rm); diff --git a/drivers/staging/uwb/include/debug-cmd.h b/drivers/staging/uwb/include/debug-cmd.h deleted file mode 100644 index f97db6c3bcc0..000000000000 --- a/drivers/staging/uwb/include/debug-cmd.h +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Ultra Wide Band - * Debug interface commands - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#ifndef __LINUX__UWB__DEBUG_CMD_H__ -#define __LINUX__UWB__DEBUG_CMD_H__ - -#include <linux/types.h> - -/* - * Debug interface commands - * - * UWB_DBG_CMD_RSV_ESTABLISH: Establish a new unicast reservation. - * - * UWB_DBG_CMD_RSV_TERMINATE: Terminate the Nth reservation. - */ - -enum uwb_dbg_cmd_type { - UWB_DBG_CMD_RSV_ESTABLISH = 1, - UWB_DBG_CMD_RSV_TERMINATE = 2, - UWB_DBG_CMD_IE_ADD = 3, - UWB_DBG_CMD_IE_RM = 4, - UWB_DBG_CMD_RADIO_START = 5, - UWB_DBG_CMD_RADIO_STOP = 6, -}; - -struct uwb_dbg_cmd_rsv_establish { - __u8 target[6]; - __u8 type; - __u16 max_mas; - __u16 min_mas; - __u8 max_interval; -}; - -struct uwb_dbg_cmd_rsv_terminate { - int index; -}; - -struct uwb_dbg_cmd_ie { - __u8 data[128]; - int len; -}; - -struct uwb_dbg_cmd { - __u32 type; - union { - struct uwb_dbg_cmd_rsv_establish rsv_establish; - struct uwb_dbg_cmd_rsv_terminate rsv_terminate; - struct uwb_dbg_cmd_ie ie_add; - struct uwb_dbg_cmd_ie ie_rm; - }; -}; - -#endif /* #ifndef __LINUX__UWB__DEBUG_CMD_H__ */ diff --git a/drivers/staging/uwb/include/spec.h b/drivers/staging/uwb/include/spec.h deleted file mode 100644 index 5f75caf7b4ba..000000000000 --- a/drivers/staging/uwb/include/spec.h +++ /dev/null @@ -1,767 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Ultra Wide Band - * UWB Standard definitions - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * All these definitions are based on the ECMA-368 standard. - * - * Note all definitions are Little Endian in the wire, and we will - * convert them to host order before operating on the bitfields (that - * yes, we use extensively). - */ - -#ifndef __LINUX__UWB_SPEC_H__ -#define __LINUX__UWB_SPEC_H__ - -#include <linux/types.h> -#include <linux/bitmap.h> -#include <linux/if_ether.h> - -#define i1480_FW 0x00000303 -/* #define i1480_FW 0x00000302 */ - -/** - * Number of Medium Access Slots in a superframe. - * - * UWB divides time in SuperFrames, each one divided in 256 pieces, or - * Medium Access Slots. See MBOA MAC[5.4.5] for details. The MAS is the - * basic bandwidth allocation unit in UWB. - */ -enum { UWB_NUM_MAS = 256 }; - -/** - * Number of Zones in superframe. - * - * UWB divides the superframe into zones with numbering starting from BPST. - * See MBOA MAC[16.8.6] - */ -enum { UWB_NUM_ZONES = 16 }; - -/* - * Number of MAS in a zone. - */ -#define UWB_MAS_PER_ZONE (UWB_NUM_MAS / UWB_NUM_ZONES) - -/* - * Number of MAS required before a row can be considered available. - */ -#define UWB_USABLE_MAS_PER_ROW (UWB_NUM_ZONES - 1) - -/* - * Number of streams per DRP reservation between a pair of devices. - * - * [ECMA-368] section 16.8.6. - */ -enum { UWB_NUM_STREAMS = 8 }; - -/* - * mMasLength - * - * The length of a MAS in microseconds. - * - * [ECMA-368] section 17.16. - */ -enum { UWB_MAS_LENGTH_US = 256 }; - -/* - * mBeaconSlotLength - * - * The length of the beacon slot in microseconds. - * - * [ECMA-368] section 17.16 - */ -enum { UWB_BEACON_SLOT_LENGTH_US = 85 }; - -/* - * mMaxLostBeacons - * - * The number beacons missing in consecutive superframes before a - * device can be considered as unreachable. - * - * [ECMA-368] section 17.16 - */ -enum { UWB_MAX_LOST_BEACONS = 3 }; - -/* - * mDRPBackOffWinMin - * - * The minimum number of superframes to wait before trying to reserve - * extra MAS. - * - * [ECMA-368] section 17.16 - */ -enum { UWB_DRP_BACKOFF_WIN_MIN = 2 }; - -/* - * mDRPBackOffWinMax - * - * The maximum number of superframes to wait before trying to reserve - * extra MAS. - * - * [ECMA-368] section 17.16 - */ -enum { UWB_DRP_BACKOFF_WIN_MAX = 16 }; - -/* - * Length of a superframe in microseconds. - */ -#define UWB_SUPERFRAME_LENGTH_US (UWB_MAS_LENGTH_US * UWB_NUM_MAS) - -/** - * UWB MAC address - * - * It is *imperative* that this struct is exactly 6 packed bytes (as - * it is also used to define headers sent down and up the wire/radio). - */ -struct uwb_mac_addr { - u8 data[ETH_ALEN]; -} __attribute__((packed)); - - -/** - * UWB device address - * - * It is *imperative* that this struct is exactly 6 packed bytes (as - * it is also used to define headers sent down and up the wire/radio). - */ -struct uwb_dev_addr { - u8 data[2]; -} __attribute__((packed)); - - -/** - * Types of UWB addresses - * - * Order matters (by size). - */ -enum uwb_addr_type { - UWB_ADDR_DEV = 0, - UWB_ADDR_MAC = 1, -}; - - -/** Size of a char buffer for printing a MAC/device address */ -enum { UWB_ADDR_STRSIZE = 32 }; - - -/** UWB WiMedia protocol IDs. */ -enum uwb_prid { - UWB_PRID_WLP_RESERVED = 0x0000, - UWB_PRID_WLP = 0x0001, - UWB_PRID_WUSB_BOT = 0x0010, - UWB_PRID_WUSB = 0x0010, - UWB_PRID_WUSB_TOP = 0x001F, -}; - - -/** PHY Rate (MBOA MAC[7.8.12, Table 61]) */ -enum uwb_phy_rate { - UWB_PHY_RATE_53 = 0, - UWB_PHY_RATE_80, - UWB_PHY_RATE_106, - UWB_PHY_RATE_160, - UWB_PHY_RATE_200, - UWB_PHY_RATE_320, - UWB_PHY_RATE_400, - UWB_PHY_RATE_480, - UWB_PHY_RATE_INVALID -}; - - -/** - * Different ways to scan (MBOA MAC[6.2.2, Table 8], WUSB[Table 8-78]) - */ -enum uwb_scan_type { - UWB_SCAN_ONLY = 0, - UWB_SCAN_OUTSIDE_BP, - UWB_SCAN_WHILE_INACTIVE, - UWB_SCAN_DISABLED, - UWB_SCAN_ONLY_STARTTIME, - UWB_SCAN_TOP -}; - - -/** ACK Policy types (MBOA MAC[7.2.1.3]) */ -enum uwb_ack_pol { - UWB_ACK_NO = 0, - UWB_ACK_INM = 1, - UWB_ACK_B = 2, - UWB_ACK_B_REQ = 3, -}; - - -/** DRP reservation types ([ECMA-368 table 106) */ -enum uwb_drp_type { - UWB_DRP_TYPE_ALIEN_BP = 0, - UWB_DRP_TYPE_HARD, - UWB_DRP_TYPE_SOFT, - UWB_DRP_TYPE_PRIVATE, - UWB_DRP_TYPE_PCA, -}; - - -/** DRP Reason Codes ([ECMA-368] table 107) */ -enum uwb_drp_reason { - UWB_DRP_REASON_ACCEPTED = 0, - UWB_DRP_REASON_CONFLICT, - UWB_DRP_REASON_PENDING, - UWB_DRP_REASON_DENIED, - UWB_DRP_REASON_MODIFIED, -}; - -/** Relinquish Request Reason Codes ([ECMA-368] table 113) */ -enum uwb_relinquish_req_reason { - UWB_RELINQUISH_REQ_REASON_NON_SPECIFIC = 0, - UWB_RELINQUISH_REQ_REASON_OVER_ALLOCATION, -}; - -/** - * DRP Notification Reason Codes (WHCI 0.95 [3.1.4.9]) - */ -enum uwb_drp_notif_reason { - UWB_DRP_NOTIF_DRP_IE_RCVD = 0, - UWB_DRP_NOTIF_CONFLICT, - UWB_DRP_NOTIF_TERMINATE, -}; - - -/** Allocation of MAS slots in a DRP request MBOA MAC[7.8.7] */ -struct uwb_drp_alloc { - __le16 zone_bm; - __le16 mas_bm; -} __attribute__((packed)); - - -/** General MAC Header format (ECMA-368[16.2]) */ -struct uwb_mac_frame_hdr { - __le16 Frame_Control; - struct uwb_dev_addr DestAddr; - struct uwb_dev_addr SrcAddr; - __le16 Sequence_Control; - __le16 Access_Information; -} __attribute__((packed)); - - -/** - * uwb_beacon_frame - a beacon frame including MAC headers - * - * [ECMA] section 16.3. - */ -struct uwb_beacon_frame { - struct uwb_mac_frame_hdr hdr; - struct uwb_mac_addr Device_Identifier; /* may be a NULL EUI-48 */ - u8 Beacon_Slot_Number; - u8 Device_Control; - u8 IEData[]; -} __attribute__((packed)); - - -/** Information Element codes (MBOA MAC[T54]) */ -enum uwb_ie { - UWB_PCA_AVAILABILITY = 2, - UWB_IE_DRP_AVAILABILITY = 8, - UWB_IE_DRP = 9, - UWB_BP_SWITCH_IE = 11, - UWB_MAC_CAPABILITIES_IE = 12, - UWB_PHY_CAPABILITIES_IE = 13, - UWB_APP_SPEC_PROBE_IE = 15, - UWB_IDENTIFICATION_IE = 19, - UWB_MASTER_KEY_ID_IE = 20, - UWB_RELINQUISH_REQUEST_IE = 21, - UWB_IE_WLP = 250, /* WiMedia Logical Link Control Protocol WLP 0.99 */ - UWB_APP_SPEC_IE = 255, -}; - - -/** - * Header common to all Information Elements (IEs) - */ -struct uwb_ie_hdr { - u8 element_id; /* enum uwb_ie */ - u8 length; -} __attribute__((packed)); - - -/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.6]) */ -struct uwb_ie_drp { - struct uwb_ie_hdr hdr; - __le16 drp_control; - struct uwb_dev_addr dev_addr; - struct uwb_drp_alloc allocs[]; -} __attribute__((packed)); - -static inline int uwb_ie_drp_type(struct uwb_ie_drp *ie) -{ - return (le16_to_cpu(ie->drp_control) >> 0) & 0x7; -} - -static inline int uwb_ie_drp_stream_index(struct uwb_ie_drp *ie) -{ - return (le16_to_cpu(ie->drp_control) >> 3) & 0x7; -} - -static inline int uwb_ie_drp_reason_code(struct uwb_ie_drp *ie) -{ - return (le16_to_cpu(ie->drp_control) >> 6) & 0x7; -} - -static inline int uwb_ie_drp_status(struct uwb_ie_drp *ie) -{ - return (le16_to_cpu(ie->drp_control) >> 9) & 0x1; -} - -static inline int uwb_ie_drp_owner(struct uwb_ie_drp *ie) -{ - return (le16_to_cpu(ie->drp_control) >> 10) & 0x1; -} - -static inline int uwb_ie_drp_tiebreaker(struct uwb_ie_drp *ie) -{ - return (le16_to_cpu(ie->drp_control) >> 11) & 0x1; -} - -static inline int uwb_ie_drp_unsafe(struct uwb_ie_drp *ie) -{ - return (le16_to_cpu(ie->drp_control) >> 12) & 0x1; -} - -static inline void uwb_ie_drp_set_type(struct uwb_ie_drp *ie, enum uwb_drp_type type) -{ - u16 drp_control = le16_to_cpu(ie->drp_control); - drp_control = (drp_control & ~(0x7 << 0)) | (type << 0); - ie->drp_control = cpu_to_le16(drp_control); -} - -static inline void uwb_ie_drp_set_stream_index(struct uwb_ie_drp *ie, int stream_index) -{ - u16 drp_control = le16_to_cpu(ie->drp_control); - drp_control = (drp_control & ~(0x7 << 3)) | (stream_index << 3); - ie->drp_control = cpu_to_le16(drp_control); -} - -static inline void uwb_ie_drp_set_reason_code(struct uwb_ie_drp *ie, - enum uwb_drp_reason reason_code) -{ - u16 drp_control = le16_to_cpu(ie->drp_control); - drp_control = (ie->drp_control & ~(0x7 << 6)) | (reason_code << 6); - ie->drp_control = cpu_to_le16(drp_control); -} - -static inline void uwb_ie_drp_set_status(struct uwb_ie_drp *ie, int status) -{ - u16 drp_control = le16_to_cpu(ie->drp_control); - drp_control = (drp_control & ~(0x1 << 9)) | (status << 9); - ie->drp_control = cpu_to_le16(drp_control); -} - -static inline void uwb_ie_drp_set_owner(struct uwb_ie_drp *ie, int owner) -{ - u16 drp_control = le16_to_cpu(ie->drp_control); - drp_control = (drp_control & ~(0x1 << 10)) | (owner << 10); - ie->drp_control = cpu_to_le16(drp_control); -} - -static inline void uwb_ie_drp_set_tiebreaker(struct uwb_ie_drp *ie, int tiebreaker) -{ - u16 drp_control = le16_to_cpu(ie->drp_control); - drp_control = (drp_control & ~(0x1 << 11)) | (tiebreaker << 11); - ie->drp_control = cpu_to_le16(drp_control); -} - -static inline void uwb_ie_drp_set_unsafe(struct uwb_ie_drp *ie, int unsafe) -{ - u16 drp_control = le16_to_cpu(ie->drp_control); - drp_control = (drp_control & ~(0x1 << 12)) | (unsafe << 12); - ie->drp_control = cpu_to_le16(drp_control); -} - -/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.7]) */ -struct uwb_ie_drp_avail { - struct uwb_ie_hdr hdr; - DECLARE_BITMAP(bmp, UWB_NUM_MAS); -} __attribute__((packed)); - -/* Relinqish Request IE ([ECMA-368] section 16.8.19). */ -struct uwb_relinquish_request_ie { - struct uwb_ie_hdr hdr; - __le16 relinquish_req_control; - struct uwb_dev_addr dev_addr; - struct uwb_drp_alloc allocs[]; -} __attribute__((packed)); - -static inline int uwb_ie_relinquish_req_reason_code(struct uwb_relinquish_request_ie *ie) -{ - return (le16_to_cpu(ie->relinquish_req_control) >> 0) & 0xf; -} - -static inline void uwb_ie_relinquish_req_set_reason_code(struct uwb_relinquish_request_ie *ie, - int reason_code) -{ - u16 ctrl = le16_to_cpu(ie->relinquish_req_control); - ctrl = (ctrl & ~(0xf << 0)) | (reason_code << 0); - ie->relinquish_req_control = cpu_to_le16(ctrl); -} - -/** - * The Vendor ID is set to an OUI that indicates the vendor of the device. - * ECMA-368 [16.8.10] - */ -struct uwb_vendor_id { - u8 data[3]; -} __attribute__((packed)); - -/** - * The device type ID - * FIXME: clarify what this means - * ECMA-368 [16.8.10] - */ -struct uwb_device_type_id { - u8 data[3]; -} __attribute__((packed)); - - -/** - * UWB device information types - * ECMA-368 [16.8.10] - */ -enum uwb_dev_info_type { - UWB_DEV_INFO_VENDOR_ID = 0, - UWB_DEV_INFO_VENDOR_TYPE, - UWB_DEV_INFO_NAME, -}; - -/** - * UWB device information found in Identification IE - * ECMA-368 [16.8.10] - */ -struct uwb_dev_info { - u8 type; /* enum uwb_dev_info_type */ - u8 length; - u8 data[]; -} __attribute__((packed)); - -/** - * UWB Identification IE - * ECMA-368 [16.8.10] - */ -struct uwb_identification_ie { - struct uwb_ie_hdr hdr; - struct uwb_dev_info info[]; -} __attribute__((packed)); - -/* - * UWB Radio Controller - * - * These definitions are common to the Radio Control layers as - * exported by the WUSB1.0 HWA and WHCI interfaces. - */ - -/** Radio Control Command Block (WUSB1.0[Table 8-65] and WHCI 0.95) */ -struct uwb_rccb { - u8 bCommandType; /* enum hwa_cet */ - __le16 wCommand; /* Command code */ - u8 bCommandContext; /* Context ID */ -} __attribute__((packed)); - - -/** Radio Control Event Block (WUSB[table 8-66], WHCI 0.95) */ -struct uwb_rceb { - u8 bEventType; /* enum hwa_cet */ - __le16 wEvent; /* Event code */ - u8 bEventContext; /* Context ID */ -} __attribute__((packed)); - - -enum { - UWB_RC_CET_GENERAL = 0, /* General Command/Event type */ - UWB_RC_CET_EX_TYPE_1 = 1, /* Extended Type 1 Command/Event type */ -}; - -/* Commands to the radio controller */ -enum uwb_rc_cmd { - UWB_RC_CMD_CHANNEL_CHANGE = 16, - UWB_RC_CMD_DEV_ADDR_MGMT = 17, /* Device Address Management */ - UWB_RC_CMD_GET_IE = 18, /* GET Information Elements */ - UWB_RC_CMD_RESET = 19, - UWB_RC_CMD_SCAN = 20, /* Scan management */ - UWB_RC_CMD_SET_BEACON_FILTER = 21, - UWB_RC_CMD_SET_DRP_IE = 22, /* Dynamic Reservation Protocol IEs */ - UWB_RC_CMD_SET_IE = 23, /* Information Element management */ - UWB_RC_CMD_SET_NOTIFICATION_FILTER = 24, - UWB_RC_CMD_SET_TX_POWER = 25, - UWB_RC_CMD_SLEEP = 26, - UWB_RC_CMD_START_BEACON = 27, - UWB_RC_CMD_STOP_BEACON = 28, - UWB_RC_CMD_BP_MERGE = 29, - UWB_RC_CMD_SEND_COMMAND_FRAME = 30, - UWB_RC_CMD_SET_ASIE_NOTIF = 31, -}; - -/* Notifications from the radio controller */ -enum uwb_rc_evt { - UWB_RC_EVT_IE_RCV = 0, - UWB_RC_EVT_BEACON = 1, - UWB_RC_EVT_BEACON_SIZE = 2, - UWB_RC_EVT_BPOIE_CHANGE = 3, - UWB_RC_EVT_BP_SLOT_CHANGE = 4, - UWB_RC_EVT_BP_SWITCH_IE_RCV = 5, - UWB_RC_EVT_DEV_ADDR_CONFLICT = 6, - UWB_RC_EVT_DRP_AVAIL = 7, - UWB_RC_EVT_DRP = 8, - UWB_RC_EVT_BP_SWITCH_STATUS = 9, - UWB_RC_EVT_CMD_FRAME_RCV = 10, - UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV = 11, - /* Events (command responses) use the same code as the command */ - UWB_RC_EVT_UNKNOWN_CMD_RCV = 65535, -}; - -enum uwb_rc_extended_type_1_cmd { - UWB_RC_SET_DAA_ENERGY_MASK = 32, - UWB_RC_SET_NOTIFICATION_FILTER_EX = 33, -}; - -enum uwb_rc_extended_type_1_evt { - UWB_RC_DAA_ENERGY_DETECTED = 0, -}; - -/* Radio Control Result Code. [WHCI] table 3-3. */ -enum { - UWB_RC_RES_SUCCESS = 0, - UWB_RC_RES_FAIL, - UWB_RC_RES_FAIL_HARDWARE, - UWB_RC_RES_FAIL_NO_SLOTS, - UWB_RC_RES_FAIL_BEACON_TOO_LARGE, - UWB_RC_RES_FAIL_INVALID_PARAMETER, - UWB_RC_RES_FAIL_UNSUPPORTED_PWR_LEVEL, - UWB_RC_RES_FAIL_INVALID_IE_DATA, - UWB_RC_RES_FAIL_BEACON_SIZE_EXCEEDED, - UWB_RC_RES_FAIL_CANCELLED, - UWB_RC_RES_FAIL_INVALID_STATE, - UWB_RC_RES_FAIL_INVALID_SIZE, - UWB_RC_RES_FAIL_ACK_NOT_RECEIVED, - UWB_RC_RES_FAIL_NO_MORE_ASIE_NOTIF, - UWB_RC_RES_FAIL_TIME_OUT = 255, -}; - -/* Confirm event. [WHCI] section 3.1.3.1 etc. */ -struct uwb_rc_evt_confirm { - struct uwb_rceb rceb; - u8 bResultCode; -} __attribute__((packed)); - -/* Device Address Management event. [WHCI] section 3.1.3.2. */ -struct uwb_rc_evt_dev_addr_mgmt { - struct uwb_rceb rceb; - u8 baAddr[ETH_ALEN]; - u8 bResultCode; -} __attribute__((packed)); - - -/* Get IE Event. [WHCI] section 3.1.3.3. */ -struct uwb_rc_evt_get_ie { - struct uwb_rceb rceb; - __le16 wIELength; - u8 IEData[]; -} __attribute__((packed)); - -/* Set DRP IE Event. [WHCI] section 3.1.3.7. */ -struct uwb_rc_evt_set_drp_ie { - struct uwb_rceb rceb; - __le16 wRemainingSpace; - u8 bResultCode; -} __attribute__((packed)); - -/* Set IE Event. [WHCI] section 3.1.3.8. */ -struct uwb_rc_evt_set_ie { - struct uwb_rceb rceb; - __le16 RemainingSpace; - u8 bResultCode; -} __attribute__((packed)); - -/* Scan command. [WHCI] 3.1.3.5. */ -struct uwb_rc_cmd_scan { - struct uwb_rccb rccb; - u8 bChannelNumber; - u8 bScanState; - __le16 wStartTime; -} __attribute__((packed)); - -/* Set DRP IE command. [WHCI] section 3.1.3.7. */ -struct uwb_rc_cmd_set_drp_ie { - struct uwb_rccb rccb; - __le16 wIELength; - struct uwb_ie_drp IEData[]; -} __attribute__((packed)); - -/* Set IE command. [WHCI] section 3.1.3.8. */ -struct uwb_rc_cmd_set_ie { - struct uwb_rccb rccb; - __le16 wIELength; - u8 IEData[]; -} __attribute__((packed)); - -/* Set DAA Energy Mask event. [WHCI 0.96] section 3.1.3.17. */ -struct uwb_rc_evt_set_daa_energy_mask { - struct uwb_rceb rceb; - __le16 wLength; - u8 result; -} __attribute__((packed)); - -/* Set Notification Filter Extended event. [WHCI 0.96] section 3.1.3.18. */ -struct uwb_rc_evt_set_notification_filter_ex { - struct uwb_rceb rceb; - __le16 wLength; - u8 result; -} __attribute__((packed)); - -/* IE Received notification. [WHCI] section 3.1.4.1. */ -struct uwb_rc_evt_ie_rcv { - struct uwb_rceb rceb; - struct uwb_dev_addr SrcAddr; - __le16 wIELength; - u8 IEData[]; -} __attribute__((packed)); - -/* Type of the received beacon. [WHCI] section 3.1.4.2. */ -enum uwb_rc_beacon_type { - UWB_RC_BEACON_TYPE_SCAN = 0, - UWB_RC_BEACON_TYPE_NEIGHBOR, - UWB_RC_BEACON_TYPE_OL_ALIEN, - UWB_RC_BEACON_TYPE_NOL_ALIEN, -}; - -/* Beacon received notification. [WHCI] 3.1.4.2. */ -struct uwb_rc_evt_beacon { - struct uwb_rceb rceb; - u8 bChannelNumber; - u8 bBeaconType; - __le16 wBPSTOffset; - u8 bLQI; - u8 bRSSI; - __le16 wBeaconInfoLength; - u8 BeaconInfo[]; -} __attribute__((packed)); - - -/* Beacon Size Change notification. [WHCI] section 3.1.4.3 */ -struct uwb_rc_evt_beacon_size { - struct uwb_rceb rceb; - __le16 wNewBeaconSize; -} __attribute__((packed)); - - -/* BPOIE Change notification. [WHCI] section 3.1.4.4. */ -struct uwb_rc_evt_bpoie_change { - struct uwb_rceb rceb; - __le16 wBPOIELength; - u8 BPOIE[]; -} __attribute__((packed)); - - -/* Beacon Slot Change notification. [WHCI] section 3.1.4.5. */ -struct uwb_rc_evt_bp_slot_change { - struct uwb_rceb rceb; - u8 slot_info; -} __attribute__((packed)); - -static inline int uwb_rc_evt_bp_slot_change_slot_num( - const struct uwb_rc_evt_bp_slot_change *evt) -{ - return evt->slot_info & 0x7f; -} - -static inline int uwb_rc_evt_bp_slot_change_no_slot( - const struct uwb_rc_evt_bp_slot_change *evt) -{ - return (evt->slot_info & 0x80) >> 7; -} - -/* BP Switch IE Received notification. [WHCI] section 3.1.4.6. */ -struct uwb_rc_evt_bp_switch_ie_rcv { - struct uwb_rceb rceb; - struct uwb_dev_addr wSrcAddr; - __le16 wIELength; - u8 IEData[]; -} __attribute__((packed)); - -/* DevAddr Conflict notification. [WHCI] section 3.1.4.7. */ -struct uwb_rc_evt_dev_addr_conflict { - struct uwb_rceb rceb; -} __attribute__((packed)); - -/* DRP notification. [WHCI] section 3.1.4.9. */ -struct uwb_rc_evt_drp { - struct uwb_rceb rceb; - struct uwb_dev_addr src_addr; - u8 reason; - u8 beacon_slot_number; - __le16 ie_length; - u8 ie_data[]; -} __attribute__((packed)); - -static inline enum uwb_drp_notif_reason uwb_rc_evt_drp_reason(struct uwb_rc_evt_drp *evt) -{ - return evt->reason & 0x0f; -} - - -/* DRP Availability Change notification. [WHCI] section 3.1.4.8. */ -struct uwb_rc_evt_drp_avail { - struct uwb_rceb rceb; - DECLARE_BITMAP(bmp, UWB_NUM_MAS); -} __attribute__((packed)); - -/* BP switch status notification. [WHCI] section 3.1.4.10. */ -struct uwb_rc_evt_bp_switch_status { - struct uwb_rceb rceb; - u8 status; - u8 slot_offset; - __le16 bpst_offset; - u8 move_countdown; -} __attribute__((packed)); - -/* Command Frame Received notification. [WHCI] section 3.1.4.11. */ -struct uwb_rc_evt_cmd_frame_rcv { - struct uwb_rceb rceb; - __le16 receive_time; - struct uwb_dev_addr wSrcAddr; - struct uwb_dev_addr wDstAddr; - __le16 control; - __le16 reserved; - __le16 dataLength; - u8 data[]; -} __attribute__((packed)); - -/* Channel Change IE Received notification. [WHCI] section 3.1.4.12. */ -struct uwb_rc_evt_channel_change_ie_rcv { - struct uwb_rceb rceb; - struct uwb_dev_addr wSrcAddr; - __le16 wIELength; - u8 IEData[]; -} __attribute__((packed)); - -/* DAA Energy Detected notification. [WHCI 0.96] section 3.1.4.14. */ -struct uwb_rc_evt_daa_energy_detected { - struct uwb_rceb rceb; - __le16 wLength; - u8 bandID; - u8 reserved; - u8 toneBmp[16]; -} __attribute__((packed)); - - -/** - * Radio Control Interface Class Descriptor - * - * WUSB 1.0 [8.6.1.2] - */ -struct uwb_rc_control_intf_class_desc { - u8 bLength; - u8 bDescriptorType; - __le16 bcdRCIVersion; -} __attribute__((packed)); - -#endif /* #ifndef __LINUX__UWB_SPEC_H__ */ diff --git a/drivers/staging/uwb/include/umc.h b/drivers/staging/uwb/include/umc.h deleted file mode 100644 index ddbceb39ad15..000000000000 --- a/drivers/staging/uwb/include/umc.h +++ /dev/null @@ -1,192 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * UWB Multi-interface Controller support. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - * - * UMC (UWB Multi-interface Controller) capabilities (e.g., radio - * controller, host controller) are presented as devices on the "umc" - * bus. - * - * The radio controller is not strictly a UMC capability but it's - * useful to present it as such. - * - * References: - * - * [WHCI] Wireless Host Controller Interface Specification for - * Certified Wireless Universal Serial Bus, revision 0.95. - * - * How this works is kind of convoluted but simple. The whci.ko driver - * loads when WHCI devices are detected. These WHCI devices expose - * many devices in the same PCI function (they couldn't have reused - * functions, no), so for each PCI function that exposes these many - * devices, whci ceates a umc_dev [whci_probe() -> whci_add_cap()] - * with umc_device_create() and adds it to the bus with - * umc_device_register(). - * - * umc_device_register() calls device_register() which will push the - * bus management code to load your UMC driver's somehting_probe() - * that you have registered for that capability code. - * - * Now when the WHCI device is removed, whci_remove() will go over - * each umc_dev assigned to each of the PCI function's capabilities - * and through whci_del_cap() call umc_device_unregister() each - * created umc_dev. Of course, if you are bound to the device, your - * driver's something_remove() will be called. - */ - -#ifndef _LINUX_UWB_UMC_H_ -#define _LINUX_UWB_UMC_H_ - -#include <linux/device.h> -#include <linux/pci.h> - -/* - * UMC capability IDs. - * - * 0x00 is reserved so use it for the radio controller device. - * - * [WHCI] table 2-8 - */ -#define UMC_CAP_ID_WHCI_RC 0x00 /* radio controller */ -#define UMC_CAP_ID_WHCI_WUSB_HC 0x01 /* WUSB host controller */ - -/** - * struct umc_dev - UMC capability device - * - * @version: version of the specification this capability conforms to. - * @cap_id: capability ID. - * @bar: PCI Bar (64 bit) where the resource lies - * @resource: register space resource. - * @irq: interrupt line. - */ -struct umc_dev { - u16 version; - u8 cap_id; - u8 bar; - struct resource resource; - unsigned irq; - struct device dev; -}; - -#define to_umc_dev(d) container_of(d, struct umc_dev, dev) - -/** - * struct umc_driver - UMC capability driver - * @cap_id: supported capability ID. - * @match: driver specific capability matching function. - * @match_data: driver specific data for match() (e.g., a - * table of pci_device_id's if umc_match_pci_id() is used). - */ -struct umc_driver { - char *name; - u8 cap_id; - int (*match)(struct umc_driver *, struct umc_dev *); - const void *match_data; - - int (*probe)(struct umc_dev *); - void (*remove)(struct umc_dev *); - int (*pre_reset)(struct umc_dev *); - int (*post_reset)(struct umc_dev *); - - struct device_driver driver; -}; - -#define to_umc_driver(d) container_of(d, struct umc_driver, driver) - -extern struct bus_type umc_bus_type; - -struct umc_dev *umc_device_create(struct device *parent, int n); -int __must_check umc_device_register(struct umc_dev *umc); -void umc_device_unregister(struct umc_dev *umc); - -int __must_check __umc_driver_register(struct umc_driver *umc_drv, - struct module *mod, - const char *mod_name); - -/** - * umc_driver_register - register a UMC capabiltity driver. - * @umc_drv: pointer to the driver. - */ -#define umc_driver_register(umc_drv) \ - __umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME) - -void umc_driver_unregister(struct umc_driver *umc_drv); - -/* - * Utility function you can use to match (umc_driver->match) against a - * null-terminated array of 'struct pci_device_id' in - * umc_driver->match_data. - */ -int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc); - -/** - * umc_parent_pci_dev - return the UMC's parent PCI device or NULL if none - * @umc_dev: UMC device whose parent PCI device we are looking for - * - * DIRTY!!! DON'T RELY ON THIS - * - * FIXME: This is as dirty as it gets, but we need some way to check - * the correct type of umc_dev->parent (so that for example, we can - * cast to pci_dev). Casting to pci_dev is necessary because at some - * point we need to request resources from the device. Mapping is - * easily over come (ioremap and stuff are bus agnostic), but hooking - * up to some error handlers (such as pci error handlers) might need - * this. - * - * THIS might (probably will) be removed in the future, so don't count - * on it. - */ -static inline struct pci_dev *umc_parent_pci_dev(struct umc_dev *umc_dev) -{ - struct pci_dev *pci_dev = NULL; - if (dev_is_pci(umc_dev->dev.parent)) - pci_dev = to_pci_dev(umc_dev->dev.parent); - return pci_dev; -} - -/** - * umc_dev_get() - reference a UMC device. - * @umc_dev: Pointer to UMC device. - * - * NOTE: we are assuming in this whole scheme that the parent device - * is referenced at _probe() time and unreferenced at _remove() - * time by the parent's subsystem. - */ -static inline struct umc_dev *umc_dev_get(struct umc_dev *umc_dev) -{ - get_device(&umc_dev->dev); - return umc_dev; -} - -/** - * umc_dev_put() - unreference a UMC device. - * @umc_dev: Pointer to UMC device. - */ -static inline void umc_dev_put(struct umc_dev *umc_dev) -{ - put_device(&umc_dev->dev); -} - -/** - * umc_set_drvdata - set UMC device's driver data. - * @umc_dev: Pointer to UMC device. - * @data: Data to set. - */ -static inline void umc_set_drvdata(struct umc_dev *umc_dev, void *data) -{ - dev_set_drvdata(&umc_dev->dev, data); -} - -/** - * umc_get_drvdata - recover UMC device's driver data. - * @umc_dev: Pointer to UMC device. - */ -static inline void *umc_get_drvdata(struct umc_dev *umc_dev) -{ - return dev_get_drvdata(&umc_dev->dev); -} - -int umc_controller_reset(struct umc_dev *umc); - -#endif /* #ifndef _LINUX_UWB_UMC_H_ */ diff --git a/drivers/staging/uwb/include/whci.h b/drivers/staging/uwb/include/whci.h deleted file mode 100644 index 1a5c2cc2b008..000000000000 --- a/drivers/staging/uwb/include/whci.h +++ /dev/null @@ -1,102 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Wireless Host Controller Interface for Ultra-Wide-Band and Wireless USB - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * References: - * [WHCI] Wireless Host Controller Interface Specification for - * Certified Wireless Universal Serial Bus, revision 0.95. - */ -#ifndef _LINUX_UWB_WHCI_H_ -#define _LINUX_UWB_WHCI_H_ - -#include <linux/pci.h> - -/* - * UWB interface capability registers (offsets from UWBBASE) - * - * [WHCI] section 2.2 - */ -#define UWBCAPINFO 0x00 /* == UWBCAPDATA(0) */ -# define UWBCAPINFO_TO_N_CAPS(c) (((c) >> 0) & 0xFull) -#define UWBCAPDATA(n) (8*(n)) -# define UWBCAPDATA_TO_VERSION(c) (((c) >> 32) & 0xFFFFull) -# define UWBCAPDATA_TO_OFFSET(c) (((c) >> 18) & 0x3FFFull) -# define UWBCAPDATA_TO_BAR(c) (((c) >> 16) & 0x3ull) -# define UWBCAPDATA_TO_SIZE(c) ((((c) >> 8) & 0xFFull) * sizeof(u32)) -# define UWBCAPDATA_TO_CAP_ID(c) (((c) >> 0) & 0xFFull) - -/* Size of the WHCI capability data (including the RC capability) for - a device with n capabilities. */ -#define UWBCAPDATA_SIZE(n) (8 + 8*(n)) - - -/* - * URC registers (offsets from URCBASE) - * - * [WHCI] section 2.3 - */ -#define URCCMD 0x00 -# define URCCMD_RESET (1 << 31) /* UMC Hardware reset */ -# define URCCMD_RS (1 << 30) /* Run/Stop */ -# define URCCMD_EARV (1 << 29) /* Event Address Register Valid */ -# define URCCMD_ACTIVE (1 << 15) /* Command is active */ -# define URCCMD_IWR (1 << 14) /* Interrupt When Ready */ -# define URCCMD_SIZE_MASK 0x00000fff /* Command size mask */ -#define URCSTS 0x04 -# define URCSTS_EPS (1 << 17) /* Event Processing Status */ -# define URCSTS_HALTED (1 << 16) /* RC halted */ -# define URCSTS_HSE (1 << 10) /* Host System Error...fried */ -# define URCSTS_ER (1 << 9) /* Event Ready */ -# define URCSTS_RCI (1 << 8) /* Ready for Command Interrupt */ -# define URCSTS_INT_MASK 0x00000700 /* URC interrupt sources */ -# define URCSTS_ISI 0x000000ff /* Interrupt Source Identification */ -#define URCINTR 0x08 -# define URCINTR_EN_ALL 0x000007ff /* Enable all interrupt sources */ -#define URCCMDADDR 0x10 -#define URCEVTADDR 0x18 -# define URCEVTADDR_OFFSET_MASK 0xfff /* Event pointer offset mask */ - - -/** Write 32 bit @value to little endian register at @addr */ -static inline -void le_writel(u32 value, void __iomem *addr) -{ - iowrite32(value, addr); -} - - -/** Read from 32 bit little endian register at @addr */ -static inline -u32 le_readl(void __iomem *addr) -{ - return ioread32(addr); -} - - -/** Write 64 bit @value to little endian register at @addr */ -static inline -void le_writeq(u64 value, void __iomem *addr) -{ - iowrite32(value, addr); - iowrite32(value >> 32, addr + 4); -} - - -/** Read from 64 bit little endian register at @addr */ -static inline -u64 le_readq(void __iomem *addr) -{ - u64 value; - value = ioread32(addr); - value |= (u64)ioread32(addr + 4) << 32; - return value; -} - -extern int whci_wait_for(struct device *dev, u32 __iomem *reg, - u32 mask, u32 result, - unsigned long max_ms, const char *tag); - -#endif /* #ifndef _LINUX_UWB_WHCI_H_ */ diff --git a/drivers/staging/uwb/lc-dev.c b/drivers/staging/uwb/lc-dev.c deleted file mode 100644 index 3e5c07fd6b10..000000000000 --- a/drivers/staging/uwb/lc-dev.c +++ /dev/null @@ -1,457 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Life cycle of devices - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/device.h> -#include <linux/export.h> -#include <linux/err.h> -#include <linux/kdev_t.h> -#include <linux/random.h> -#include <linux/stat.h> -#include "uwb-internal.h" - -/* We initialize addresses to 0xff (invalid, as it is bcast) */ -static inline void uwb_dev_addr_init(struct uwb_dev_addr *addr) -{ - memset(&addr->data, 0xff, sizeof(addr->data)); -} - -static inline void uwb_mac_addr_init(struct uwb_mac_addr *addr) -{ - memset(&addr->data, 0xff, sizeof(addr->data)); -} - -/* - * Add callback @new to be called when an event occurs in @rc. - */ -int uwb_notifs_register(struct uwb_rc *rc, struct uwb_notifs_handler *new) -{ - if (mutex_lock_interruptible(&rc->notifs_chain.mutex)) - return -ERESTARTSYS; - list_add(&new->list_node, &rc->notifs_chain.list); - mutex_unlock(&rc->notifs_chain.mutex); - return 0; -} -EXPORT_SYMBOL_GPL(uwb_notifs_register); - -/* - * Remove event handler (callback) - */ -int uwb_notifs_deregister(struct uwb_rc *rc, struct uwb_notifs_handler *entry) -{ - if (mutex_lock_interruptible(&rc->notifs_chain.mutex)) - return -ERESTARTSYS; - list_del(&entry->list_node); - mutex_unlock(&rc->notifs_chain.mutex); - return 0; -} -EXPORT_SYMBOL_GPL(uwb_notifs_deregister); - -/* - * Notify all event handlers of a given event on @rc - * - * We are called with a valid reference to the device, or NULL if the - * event is not for a particular event (e.g., a BG join event). - */ -void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event) -{ - struct uwb_notifs_handler *handler; - if (mutex_lock_interruptible(&rc->notifs_chain.mutex)) - return; - if (!list_empty(&rc->notifs_chain.list)) { - list_for_each_entry(handler, &rc->notifs_chain.list, list_node) { - handler->cb(handler->data, uwb_dev, event); - } - } - mutex_unlock(&rc->notifs_chain.mutex); -} - -/* - * Release the backing device of a uwb_dev that has been dynamically allocated. - */ -static void uwb_dev_sys_release(struct device *dev) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - - uwb_bce_put(uwb_dev->bce); - memset(uwb_dev, 0x69, sizeof(*uwb_dev)); - kfree(uwb_dev); -} - -/* - * Initialize a UWB device instance - * - * Alloc, zero and call this function. - */ -void uwb_dev_init(struct uwb_dev *uwb_dev) -{ - mutex_init(&uwb_dev->mutex); - device_initialize(&uwb_dev->dev); - uwb_dev->dev.release = uwb_dev_sys_release; - uwb_dev_addr_init(&uwb_dev->dev_addr); - uwb_mac_addr_init(&uwb_dev->mac_addr); - bitmap_fill(uwb_dev->streams, UWB_NUM_GLOBAL_STREAMS); -} - -static ssize_t uwb_dev_EUI_48_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - char addr[UWB_ADDR_STRSIZE]; - - uwb_mac_addr_print(addr, sizeof(addr), &uwb_dev->mac_addr); - return sprintf(buf, "%s\n", addr); -} -static DEVICE_ATTR(EUI_48, S_IRUGO, uwb_dev_EUI_48_show, NULL); - -static ssize_t uwb_dev_DevAddr_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - char addr[UWB_ADDR_STRSIZE]; - - uwb_dev_addr_print(addr, sizeof(addr), &uwb_dev->dev_addr); - return sprintf(buf, "%s\n", addr); -} -static DEVICE_ATTR(DevAddr, S_IRUGO, uwb_dev_DevAddr_show, NULL); - -/* - * Show the BPST of this device. - * - * Calculated from the receive time of the device's beacon and it's - * slot number. - */ -static ssize_t uwb_dev_BPST_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_beca_e *bce; - struct uwb_beacon_frame *bf; - u16 bpst; - - bce = uwb_dev->bce; - mutex_lock(&bce->mutex); - bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo; - bpst = bce->be->wBPSTOffset - - (u16)(bf->Beacon_Slot_Number * UWB_BEACON_SLOT_LENGTH_US); - mutex_unlock(&bce->mutex); - - return sprintf(buf, "%d\n", bpst); -} -static DEVICE_ATTR(BPST, S_IRUGO, uwb_dev_BPST_show, NULL); - -/* - * Show the IEs a device is beaconing - * - * We need to access the beacon cache, so we just lock it really - * quick, print the IEs and unlock. - * - * We have a reference on the cache entry, so that should be - * quite safe. - */ -static ssize_t uwb_dev_IEs_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - - return uwb_bce_print_IEs(uwb_dev, uwb_dev->bce, buf, PAGE_SIZE); -} -static DEVICE_ATTR(IEs, S_IRUGO | S_IWUSR, uwb_dev_IEs_show, NULL); - -static ssize_t uwb_dev_LQE_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_beca_e *bce = uwb_dev->bce; - size_t result; - - mutex_lock(&bce->mutex); - result = stats_show(&uwb_dev->bce->lqe_stats, buf); - mutex_unlock(&bce->mutex); - return result; -} - -static ssize_t uwb_dev_LQE_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_beca_e *bce = uwb_dev->bce; - ssize_t result; - - mutex_lock(&bce->mutex); - result = stats_store(&uwb_dev->bce->lqe_stats, buf, size); - mutex_unlock(&bce->mutex); - return result; -} -static DEVICE_ATTR(LQE, S_IRUGO | S_IWUSR, uwb_dev_LQE_show, uwb_dev_LQE_store); - -static ssize_t uwb_dev_RSSI_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_beca_e *bce = uwb_dev->bce; - size_t result; - - mutex_lock(&bce->mutex); - result = stats_show(&uwb_dev->bce->rssi_stats, buf); - mutex_unlock(&bce->mutex); - return result; -} - -static ssize_t uwb_dev_RSSI_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_beca_e *bce = uwb_dev->bce; - ssize_t result; - - mutex_lock(&bce->mutex); - result = stats_store(&uwb_dev->bce->rssi_stats, buf, size); - mutex_unlock(&bce->mutex); - return result; -} -static DEVICE_ATTR(RSSI, S_IRUGO | S_IWUSR, uwb_dev_RSSI_show, uwb_dev_RSSI_store); - - -static struct attribute *uwb_dev_attrs[] = { - &dev_attr_EUI_48.attr, - &dev_attr_DevAddr.attr, - &dev_attr_BPST.attr, - &dev_attr_IEs.attr, - &dev_attr_LQE.attr, - &dev_attr_RSSI.attr, - NULL, -}; -ATTRIBUTE_GROUPS(uwb_dev); - -/* UWB bus type. */ -struct bus_type uwb_bus_type = { - .name = "uwb", - .dev_groups = uwb_dev_groups, -}; - -/** - * Device SYSFS registration - */ -static int __uwb_dev_sys_add(struct uwb_dev *uwb_dev, struct device *parent_dev) -{ - struct device *dev; - - dev = &uwb_dev->dev; - dev->parent = parent_dev; - dev_set_drvdata(dev, uwb_dev); - - return device_add(dev); -} - - -static void __uwb_dev_sys_rm(struct uwb_dev *uwb_dev) -{ - dev_set_drvdata(&uwb_dev->dev, NULL); - device_del(&uwb_dev->dev); -} - - -/** - * Register and initialize a new UWB device - * - * Did you call uwb_dev_init() on it? - * - * @parent_rc: is the parent radio controller who has the link to the - * device. When registering the UWB device that is a UWB - * Radio Controller, we point back to it. - * - * If registering the device that is part of a radio, caller has set - * rc->uwb_dev->dev. Otherwise it is to be left NULL--a new one will - * be allocated. - */ -int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev, - struct uwb_rc *parent_rc) -{ - int result; - struct device *dev; - - BUG_ON(uwb_dev == NULL); - BUG_ON(parent_dev == NULL); - BUG_ON(parent_rc == NULL); - - mutex_lock(&uwb_dev->mutex); - dev = &uwb_dev->dev; - uwb_dev->rc = parent_rc; - result = __uwb_dev_sys_add(uwb_dev, parent_dev); - if (result < 0) - printk(KERN_ERR "UWB: unable to register dev %s with sysfs: %d\n", - dev_name(dev), result); - mutex_unlock(&uwb_dev->mutex); - return result; -} - - -void uwb_dev_rm(struct uwb_dev *uwb_dev) -{ - mutex_lock(&uwb_dev->mutex); - __uwb_dev_sys_rm(uwb_dev); - mutex_unlock(&uwb_dev->mutex); -} - - -static -int __uwb_dev_try_get(struct device *dev, void *__target_uwb_dev) -{ - struct uwb_dev *target_uwb_dev = __target_uwb_dev; - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - if (uwb_dev == target_uwb_dev) { - uwb_dev_get(uwb_dev); - return 1; - } else - return 0; -} - - -/** - * Given a UWB device descriptor, validate and refcount it - * - * @returns NULL if the device does not exist or is quiescing; the ptr to - * it otherwise. - */ -struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev) -{ - if (uwb_dev_for_each(rc, __uwb_dev_try_get, uwb_dev)) - return uwb_dev; - else - return NULL; -} -EXPORT_SYMBOL_GPL(uwb_dev_try_get); - - -/** - * Remove a device from the system [grunt for other functions] - */ -int __uwb_dev_offair(struct uwb_dev *uwb_dev, struct uwb_rc *rc) -{ - struct device *dev = &uwb_dev->dev; - char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE]; - - uwb_mac_addr_print(macbuf, sizeof(macbuf), &uwb_dev->mac_addr); - uwb_dev_addr_print(devbuf, sizeof(devbuf), &uwb_dev->dev_addr); - dev_info(dev, "uwb device (mac %s dev %s) disconnected from %s %s\n", - macbuf, devbuf, - uwb_dev->dev.bus->name, - rc ? dev_name(&(rc->uwb_dev.dev)) : ""); - uwb_dev_rm(uwb_dev); - list_del(&uwb_dev->bce->node); - uwb_bce_put(uwb_dev->bce); - uwb_dev_put(uwb_dev); /* for the creation in _onair() */ - - return 0; -} - - -/** - * A device went off the air, clean up after it! - * - * This is called by the UWB Daemon (through the beacon purge function - * uwb_bcn_cache_purge) when it is detected that a device has been in - * radio silence for a while. - * - * If this device is actually a local radio controller we don't need - * to go through the offair process, as it is not registered as that. - * - * NOTE: uwb_bcn_cache.mutex is held! - */ -void uwbd_dev_offair(struct uwb_beca_e *bce) -{ - struct uwb_dev *uwb_dev; - - uwb_dev = bce->uwb_dev; - if (uwb_dev) { - uwb_notify(uwb_dev->rc, uwb_dev, UWB_NOTIF_OFFAIR); - __uwb_dev_offair(uwb_dev, uwb_dev->rc); - } -} - - -/** - * A device went on the air, start it up! - * - * This is called by the UWB Daemon when it is detected that a device - * has popped up in the radio range of the radio controller. - * - * It will just create the freaking device, register the beacon and - * stuff and yatla, done. - * - * - * NOTE: uwb_beca.mutex is held, bce->mutex is held - */ -void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce) -{ - int result; - struct device *dev = &rc->uwb_dev.dev; - struct uwb_dev *uwb_dev; - char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE]; - - uwb_mac_addr_print(macbuf, sizeof(macbuf), bce->mac_addr); - uwb_dev_addr_print(devbuf, sizeof(devbuf), &bce->dev_addr); - uwb_dev = kzalloc(sizeof(struct uwb_dev), GFP_KERNEL); - if (uwb_dev == NULL) { - dev_err(dev, "new device %s: Cannot allocate memory\n", - macbuf); - return; - } - uwb_dev_init(uwb_dev); /* This sets refcnt to one, we own it */ - uwb_dev->dev.bus = &uwb_bus_type; - uwb_dev->mac_addr = *bce->mac_addr; - uwb_dev->dev_addr = bce->dev_addr; - dev_set_name(&uwb_dev->dev, "%s", macbuf); - - /* plug the beacon cache */ - bce->uwb_dev = uwb_dev; - uwb_dev->bce = bce; - uwb_bce_get(bce); /* released in uwb_dev_sys_release() */ - - result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc); - if (result < 0) { - dev_err(dev, "new device %s: cannot instantiate device\n", - macbuf); - goto error_dev_add; - } - - dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n", - macbuf, devbuf, uwb_dev->dev.bus->name, - dev_name(&(rc->uwb_dev.dev))); - uwb_notify(rc, uwb_dev, UWB_NOTIF_ONAIR); - return; - -error_dev_add: - bce->uwb_dev = NULL; - uwb_bce_put(bce); - kfree(uwb_dev); - return; -} - -/** - * Iterate over the list of UWB devices, calling a @function on each - * - * See docs for bus_for_each().... - * - * @rc: radio controller for the devices. - * @function: function to call. - * @priv: data to pass to @function. - * @returns: 0 if no invocation of function() returned a value - * different to zero. That value otherwise. - */ -int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f function, void *priv) -{ - return device_for_each_child(&rc->uwb_dev.dev, priv, function); -} -EXPORT_SYMBOL_GPL(uwb_dev_for_each); diff --git a/drivers/staging/uwb/lc-rc.c b/drivers/staging/uwb/lc-rc.c deleted file mode 100644 index ee31b221cdc2..000000000000 --- a/drivers/staging/uwb/lc-rc.c +++ /dev/null @@ -1,569 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Life cycle of radio controllers - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - * - * A UWB radio controller is also a UWB device, so it embeds one... - * - * List of RCs comes from the 'struct class uwb_rc_class'. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/random.h> -#include <linux/kdev_t.h> -#include <linux/etherdevice.h> -#include <linux/usb.h> -#include <linux/slab.h> -#include <linux/export.h> - -#include "uwb-internal.h" - -static int uwb_rc_index_match(struct device *dev, const void *data) -{ - const int *index = data; - struct uwb_rc *rc = dev_get_drvdata(dev); - - if (rc->index == *index) - return 1; - return 0; -} - -static struct uwb_rc *uwb_rc_find_by_index(int index) -{ - struct device *dev; - struct uwb_rc *rc = NULL; - - dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match); - if (dev) { - rc = dev_get_drvdata(dev); - put_device(dev); - } - - return rc; -} - -static int uwb_rc_new_index(void) -{ - int index = 0; - - for (;;) { - if (!uwb_rc_find_by_index(index)) - return index; - if (++index < 0) - index = 0; - } -} - -/** - * Release the backing device of a uwb_rc that has been dynamically allocated. - */ -static void uwb_rc_sys_release(struct device *dev) -{ - struct uwb_dev *uwb_dev = container_of(dev, struct uwb_dev, dev); - struct uwb_rc *rc = container_of(uwb_dev, struct uwb_rc, uwb_dev); - - uwb_rc_ie_release(rc); - kfree(rc); -} - - -void uwb_rc_init(struct uwb_rc *rc) -{ - struct uwb_dev *uwb_dev = &rc->uwb_dev; - - uwb_dev_init(uwb_dev); - rc->uwb_dev.dev.class = &uwb_rc_class; - rc->uwb_dev.dev.release = uwb_rc_sys_release; - uwb_rc_neh_create(rc); - rc->beaconing = -1; - rc->scan_type = UWB_SCAN_DISABLED; - INIT_LIST_HEAD(&rc->notifs_chain.list); - mutex_init(&rc->notifs_chain.mutex); - INIT_LIST_HEAD(&rc->uwb_beca.list); - mutex_init(&rc->uwb_beca.mutex); - uwb_drp_avail_init(rc); - uwb_rc_ie_init(rc); - uwb_rsv_init(rc); - uwb_rc_pal_init(rc); -} -EXPORT_SYMBOL_GPL(uwb_rc_init); - - -struct uwb_rc *uwb_rc_alloc(void) -{ - struct uwb_rc *rc; - rc = kzalloc(sizeof(*rc), GFP_KERNEL); - if (rc == NULL) - return NULL; - uwb_rc_init(rc); - return rc; -} -EXPORT_SYMBOL_GPL(uwb_rc_alloc); - -/* - * Show the ASIE that is broadcast in the UWB beacon by this uwb_rc device. - */ -static ssize_t ASIE_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_rc *rc = uwb_dev->rc; - struct uwb_ie_hdr *ie; - void *ptr; - size_t len; - int result = 0; - - /* init empty buffer. */ - result = scnprintf(buf, PAGE_SIZE, "\n"); - mutex_lock(&rc->ies_mutex); - /* walk IEData looking for an ASIE. */ - ptr = rc->ies->IEData; - len = le16_to_cpu(rc->ies->wIELength); - for (;;) { - ie = uwb_ie_next(&ptr, &len); - if (!ie) - break; - if (ie->element_id == UWB_APP_SPEC_IE) { - result = uwb_ie_dump_hex(ie, - ie->length + sizeof(struct uwb_ie_hdr), - buf, PAGE_SIZE); - break; - } - } - mutex_unlock(&rc->ies_mutex); - - return result; -} - -/* - * Update the ASIE that is broadcast in the UWB beacon by this uwb_rc device. - */ -static ssize_t ASIE_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_rc *rc = uwb_dev->rc; - char ie_buf[255]; - int result, ie_len = 0; - const char *cur_ptr = buf; - struct uwb_ie_hdr *ie; - - /* empty string means clear the ASIE. */ - if (strlen(buf) <= 1) { - uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE); - return size; - } - - /* if non-empty string, convert string of hex chars to binary. */ - while (ie_len < sizeof(ie_buf)) { - int char_count; - - if (sscanf(cur_ptr, " %02hhX %n", - &(ie_buf[ie_len]), &char_count) > 0) { - ++ie_len; - /* skip chars read from cur_ptr. */ - cur_ptr += char_count; - } else { - break; - } - } - - /* validate IE length and type. */ - if (ie_len < sizeof(struct uwb_ie_hdr)) { - dev_err(dev, "%s: Invalid ASIE size %d.\n", __func__, ie_len); - return -EINVAL; - } - - ie = (struct uwb_ie_hdr *)ie_buf; - if (ie->element_id != UWB_APP_SPEC_IE) { - dev_err(dev, "%s: Invalid IE element type size = 0x%02X.\n", - __func__, ie->element_id); - return -EINVAL; - } - - /* bounds check length field from user. */ - if (ie->length > (ie_len - sizeof(struct uwb_ie_hdr))) - ie->length = ie_len - sizeof(struct uwb_ie_hdr); - - /* - * Valid ASIE received. Remove current ASIE then add the new one using - * uwb_rc_ie_add. - */ - uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE); - - result = uwb_rc_ie_add(rc, ie, ie->length + sizeof(struct uwb_ie_hdr)); - - return result >= 0 ? size : result; -} -static DEVICE_ATTR_RW(ASIE); - -static struct attribute *rc_attrs[] = { - &dev_attr_mac_address.attr, - &dev_attr_scan.attr, - &dev_attr_beacon.attr, - &dev_attr_ASIE.attr, - NULL, -}; - -static const struct attribute_group rc_attr_group = { - .attrs = rc_attrs, -}; - -/* - * Registration of sysfs specific stuff - */ -static int uwb_rc_sys_add(struct uwb_rc *rc) -{ - return sysfs_create_group(&rc->uwb_dev.dev.kobj, &rc_attr_group); -} - - -static void __uwb_rc_sys_rm(struct uwb_rc *rc) -{ - sysfs_remove_group(&rc->uwb_dev.dev.kobj, &rc_attr_group); -} - -/** - * uwb_rc_mac_addr_setup - get an RC's EUI-48 address or set it - * @rc: the radio controller. - * - * If the EUI-48 address is 00:00:00:00:00:00 or FF:FF:FF:FF:FF:FF - * then a random locally administered EUI-48 is generated and set on - * the device. The probability of address collisions is sufficiently - * unlikely (1/2^40 = 9.1e-13) that they're not checked for. - */ -static -int uwb_rc_mac_addr_setup(struct uwb_rc *rc) -{ - int result; - struct device *dev = &rc->uwb_dev.dev; - struct uwb_dev *uwb_dev = &rc->uwb_dev; - char devname[UWB_ADDR_STRSIZE]; - struct uwb_mac_addr addr; - - result = uwb_rc_mac_addr_get(rc, &addr); - if (result < 0) { - dev_err(dev, "cannot retrieve UWB EUI-48 address: %d\n", result); - return result; - } - - if (uwb_mac_addr_unset(&addr) || uwb_mac_addr_bcast(&addr)) { - addr.data[0] = 0x02; /* locally administered and unicast */ - get_random_bytes(&addr.data[1], sizeof(addr.data)-1); - - result = uwb_rc_mac_addr_set(rc, &addr); - if (result < 0) { - uwb_mac_addr_print(devname, sizeof(devname), &addr); - dev_err(dev, "cannot set EUI-48 address %s: %d\n", - devname, result); - return result; - } - } - uwb_dev->mac_addr = addr; - return 0; -} - - - -static int uwb_rc_setup(struct uwb_rc *rc) -{ - int result; - struct device *dev = &rc->uwb_dev.dev; - - result = uwb_radio_setup(rc); - if (result < 0) { - dev_err(dev, "cannot setup UWB radio: %d\n", result); - goto error; - } - result = uwb_rc_mac_addr_setup(rc); - if (result < 0) { - dev_err(dev, "cannot setup UWB MAC address: %d\n", result); - goto error; - } - result = uwb_rc_dev_addr_assign(rc); - if (result < 0) { - dev_err(dev, "cannot assign UWB DevAddr: %d\n", result); - goto error; - } - result = uwb_rc_ie_setup(rc); - if (result < 0) { - dev_err(dev, "cannot setup IE subsystem: %d\n", result); - goto error_ie_setup; - } - result = uwb_rsv_setup(rc); - if (result < 0) { - dev_err(dev, "cannot setup reservation subsystem: %d\n", result); - goto error_rsv_setup; - } - uwb_dbg_add_rc(rc); - return 0; - -error_rsv_setup: - uwb_rc_ie_release(rc); -error_ie_setup: -error: - return result; -} - - -/** - * Register a new UWB radio controller - * - * Did you call uwb_rc_init() on your rc? - * - * We assume that this is being called with a > 0 refcount on - * it [through ops->{get|put}_device(). We'll take our own, though. - * - * @parent_dev is our real device, the one that provides the actual UWB device - */ -int uwb_rc_add(struct uwb_rc *rc, struct device *parent_dev, void *priv) -{ - int result; - struct device *dev; - char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE]; - - rc->index = uwb_rc_new_index(); - - dev = &rc->uwb_dev.dev; - dev_set_name(dev, "uwb%d", rc->index); - - rc->priv = priv; - - init_waitqueue_head(&rc->uwbd.wq); - INIT_LIST_HEAD(&rc->uwbd.event_list); - spin_lock_init(&rc->uwbd.event_list_lock); - - uwbd_start(rc); - - result = rc->start(rc); - if (result < 0) - goto error_rc_start; - - result = uwb_rc_setup(rc); - if (result < 0) { - dev_err(dev, "cannot setup UWB radio controller: %d\n", result); - goto error_rc_setup; - } - - result = uwb_dev_add(&rc->uwb_dev, parent_dev, rc); - if (result < 0 && result != -EADDRNOTAVAIL) - goto error_dev_add; - - result = uwb_rc_sys_add(rc); - if (result < 0) { - dev_err(parent_dev, "cannot register UWB radio controller " - "dev attributes: %d\n", result); - goto error_sys_add; - } - - uwb_mac_addr_print(macbuf, sizeof(macbuf), &rc->uwb_dev.mac_addr); - uwb_dev_addr_print(devbuf, sizeof(devbuf), &rc->uwb_dev.dev_addr); - dev_info(dev, - "new uwb radio controller (mac %s dev %s) on %s %s\n", - macbuf, devbuf, parent_dev->bus->name, dev_name(parent_dev)); - rc->ready = 1; - return 0; - -error_sys_add: - uwb_dev_rm(&rc->uwb_dev); -error_dev_add: -error_rc_setup: - rc->stop(rc); -error_rc_start: - uwbd_stop(rc); - return result; -} -EXPORT_SYMBOL_GPL(uwb_rc_add); - - -static int uwb_dev_offair_helper(struct device *dev, void *priv) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - - return __uwb_dev_offair(uwb_dev, uwb_dev->rc); -} - -/* - * Remove a Radio Controller; stop beaconing/scanning, disconnect all children - */ -void uwb_rc_rm(struct uwb_rc *rc) -{ - rc->ready = 0; - - uwb_dbg_del_rc(rc); - uwb_rsv_remove_all(rc); - uwb_radio_shutdown(rc); - - rc->stop(rc); - - uwbd_stop(rc); - uwb_rc_neh_destroy(rc); - - uwb_dev_lock(&rc->uwb_dev); - rc->priv = NULL; - rc->cmd = NULL; - uwb_dev_unlock(&rc->uwb_dev); - mutex_lock(&rc->uwb_beca.mutex); - uwb_dev_for_each(rc, uwb_dev_offair_helper, NULL); - __uwb_rc_sys_rm(rc); - mutex_unlock(&rc->uwb_beca.mutex); - uwb_rsv_cleanup(rc); - uwb_beca_release(rc); - uwb_dev_rm(&rc->uwb_dev); -} -EXPORT_SYMBOL_GPL(uwb_rc_rm); - -static int find_rc_try_get(struct device *dev, const void *data) -{ - const struct uwb_rc *target_rc = data; - struct uwb_rc *rc = dev_get_drvdata(dev); - - if (rc == NULL) { - WARN_ON(1); - return 0; - } - if (rc == target_rc) { - if (rc->ready == 0) - return 0; - else - return 1; - } - return 0; -} - -/** - * Given a radio controller descriptor, validate and refcount it - * - * @returns NULL if the rc does not exist or is quiescing; the ptr to - * it otherwise. - */ -struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc) -{ - struct device *dev; - struct uwb_rc *rc = NULL; - - dev = class_find_device(&uwb_rc_class, NULL, target_rc, - find_rc_try_get); - if (dev) { - rc = dev_get_drvdata(dev); - __uwb_rc_get(rc); - put_device(dev); - } - - return rc; -} -EXPORT_SYMBOL_GPL(__uwb_rc_try_get); - -/* - * RC get for external refcount acquirers... - * - * Increments the refcount of the device and it's backend modules - */ -static inline struct uwb_rc *uwb_rc_get(struct uwb_rc *rc) -{ - if (rc->ready == 0) - return NULL; - uwb_dev_get(&rc->uwb_dev); - return rc; -} - -static int find_rc_grandpa(struct device *dev, const void *data) -{ - const struct device *grandpa_dev = data; - struct uwb_rc *rc = dev_get_drvdata(dev); - - if (rc->uwb_dev.dev.parent->parent == grandpa_dev) { - rc = uwb_rc_get(rc); - return 1; - } - return 0; -} - -/** - * Locate and refcount a radio controller given a common grand-parent - * - * @grandpa_dev Pointer to the 'grandparent' device structure. - * @returns NULL If the rc does not exist or is quiescing; the ptr to - * it otherwise, properly referenced. - * - * The Radio Control interface (or the UWB Radio Controller) is always - * an interface of a device. The parent is the interface, the - * grandparent is the device that encapsulates the interface. - * - * There is no need to lock around as the "grandpa" would be - * refcounted by the target, and to remove the referemes, the - * uwb_rc_class->sem would have to be taken--we hold it, ergo we - * should be safe. - */ -struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev) -{ - struct device *dev; - struct uwb_rc *rc = NULL; - - dev = class_find_device(&uwb_rc_class, NULL, grandpa_dev, - find_rc_grandpa); - if (dev) { - rc = dev_get_drvdata(dev); - put_device(dev); - } - - return rc; -} -EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa); - -/** - * Find a radio controller by device address - * - * @returns the pointer to the radio controller, properly referenced - */ -static int find_rc_dev(struct device *dev, const void *data) -{ - const struct uwb_dev_addr *addr = data; - struct uwb_rc *rc = dev_get_drvdata(dev); - - if (rc == NULL) { - WARN_ON(1); - return 0; - } - if (!uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, addr)) { - rc = uwb_rc_get(rc); - return 1; - } - return 0; -} - -struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr) -{ - struct device *dev; - struct uwb_rc *rc = NULL; - - dev = class_find_device(&uwb_rc_class, NULL, addr, find_rc_dev); - if (dev) { - rc = dev_get_drvdata(dev); - put_device(dev); - } - - return rc; -} -EXPORT_SYMBOL_GPL(uwb_rc_get_by_dev); - -/** - * Drop a reference on a radio controller - * - * This is the version that should be done by entities external to the - * UWB Radio Control stack (ie: clients of the API). - */ -void uwb_rc_put(struct uwb_rc *rc) -{ - __uwb_rc_put(rc); -} -EXPORT_SYMBOL_GPL(uwb_rc_put); diff --git a/drivers/staging/uwb/neh.c b/drivers/staging/uwb/neh.c deleted file mode 100644 index 1695584be412..000000000000 --- a/drivers/staging/uwb/neh.c +++ /dev/null @@ -1,606 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * WUSB Wire Adapter: Radio Control Interface (WUSB[8]) - * Notification and Event Handling - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * The RC interface of the Host Wire Adapter (USB dongle) or WHCI PCI - * card delivers a stream of notifications and events to the - * notification end event endpoint or area. This code takes care of - * getting a buffer with that data, breaking it up in separate - * notifications and events and then deliver those. - * - * Events are answers to commands and they carry a context ID that - * associates them to the command. Notifications are that, - * notifications, they come out of the blue and have a context ID of - * zero. Think of the context ID kind of like a handler. The - * uwb_rc_neh_* code deals with managing context IDs. - * - * This is why you require a handle to operate on a UWB host. When you - * open a handle a context ID is assigned to you. - * - * So, as it is done is: - * - * 1. Add an event handler [uwb_rc_neh_add()] (assigns a ctx id) - * 2. Issue command [rc->cmd(rc, ...)] - * 3. Arm the timeout timer [uwb_rc_neh_arm()] - * 4, Release the reference to the neh [uwb_rc_neh_put()] - * 5. Wait for the callback - * 6. Command result (RCEB) is passed to the callback - * - * If (2) fails, you should remove the handle [uwb_rc_neh_rm()] - * instead of arming the timer. - * - * Handles are for using in *serialized* code, single thread. - * - * When the notification/event comes, the IRQ handler/endpoint - * callback passes the data read to uwb_rc_neh_grok() which will break - * it up in a discrete series of events, look up who is listening for - * them and execute the pertinent callbacks. - * - * If the reader detects an error while reading the data stream, call - * uwb_rc_neh_error(). - * - * CONSTRAINTS/ASSUMPTIONS: - * - * - Most notifications/events are small (less thank .5k), copying - * around is ok. - * - * - Notifications/events are ALWAYS smaller than PAGE_SIZE - * - * - Notifications/events always come in a single piece (ie: a buffer - * will always contain entire notifications/events). - * - * - we cannot know in advance how long each event is (because they - * lack a length field in their header--smart move by the standards - * body, btw). So we need a facility to get the event size given the - * header. This is what the EST code does (notif/Event Size - * Tables), check nest.c--as well, you can associate the size to - * the handle [w/ neh->extra_size()]. - * - * - Most notifications/events are fixed size; only a few are variable - * size (NEST takes care of that). - * - * - Listeners of events expect them, so they usually provide a - * buffer, as they know the size. Listeners to notifications don't, - * so we allocate their buffers dynamically. - */ -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/export.h> - -#include "uwb-internal.h" - -/* - * UWB Radio Controller Notification/Event Handle - * - * Represents an entity waiting for an event coming from the UWB Radio - * Controller with a given context id (context) and type (evt_type and - * evt). On reception of the notification/event, the callback (cb) is - * called with the event. - * - * If the timer expires before the event is received, the callback is - * called with -ETIMEDOUT as the event size. - */ -struct uwb_rc_neh { - struct kref kref; - - struct uwb_rc *rc; - u8 evt_type; - __le16 evt; - u8 context; - u8 completed; - uwb_rc_cmd_cb_f cb; - void *arg; - - struct timer_list timer; - struct list_head list_node; -}; - -static void uwb_rc_neh_timer(struct timer_list *t); - -static void uwb_rc_neh_release(struct kref *kref) -{ - struct uwb_rc_neh *neh = container_of(kref, struct uwb_rc_neh, kref); - - kfree(neh); -} - -static void uwb_rc_neh_get(struct uwb_rc_neh *neh) -{ - kref_get(&neh->kref); -} - -/** - * uwb_rc_neh_put - release reference to a neh - * @neh: the neh - */ -void uwb_rc_neh_put(struct uwb_rc_neh *neh) -{ - kref_put(&neh->kref, uwb_rc_neh_release); -} - - -/** - * Assigns @neh a context id from @rc's pool - * - * @rc: UWB Radio Controller descriptor; @rc->neh_lock taken - * @neh: Notification/Event Handle - * @returns 0 if context id was assigned ok; < 0 errno on error (if - * all the context IDs are taken). - * - * (assumes @wa is locked). - * - * NOTE: WUSB spec reserves context ids 0x00 for notifications and - * 0xff is invalid, so they must not be used. Initialization - * fills up those two in the bitmap so they are not allocated. - * - * We spread the allocation around to reduce the possibility of two - * consecutive opened @neh's getting the same context ID assigned (to - * avoid surprises with late events that timed out long time ago). So - * first we search from where @rc->ctx_roll is, if not found, we - * search from zero. - */ -static -int __uwb_rc_ctx_get(struct uwb_rc *rc, struct uwb_rc_neh *neh) -{ - int result; - result = find_next_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX, - rc->ctx_roll++); - if (result < UWB_RC_CTX_MAX) - goto found; - result = find_first_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX); - if (result < UWB_RC_CTX_MAX) - goto found; - return -ENFILE; -found: - set_bit(result, rc->ctx_bm); - neh->context = result; - return 0; -} - - -/** Releases @neh's context ID back to @rc (@rc->neh_lock is locked). */ -static -void __uwb_rc_ctx_put(struct uwb_rc *rc, struct uwb_rc_neh *neh) -{ - struct device *dev = &rc->uwb_dev.dev; - if (neh->context == 0) - return; - if (test_bit(neh->context, rc->ctx_bm) == 0) { - dev_err(dev, "context %u not set in bitmap\n", - neh->context); - WARN_ON(1); - } - clear_bit(neh->context, rc->ctx_bm); - neh->context = 0; -} - -/** - * uwb_rc_neh_add - add a neh for a radio controller command - * @rc: the radio controller - * @cmd: the radio controller command - * @expected_type: the type of the expected response event - * @expected_event: the expected event ID - * @cb: callback for when the event is received - * @arg: argument for the callback - * - * Creates a neh and adds it to the list of those waiting for an - * event. A context ID will be assigned to the command. - */ -struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd, - u8 expected_type, u16 expected_event, - uwb_rc_cmd_cb_f cb, void *arg) -{ - int result; - unsigned long flags; - struct device *dev = &rc->uwb_dev.dev; - struct uwb_rc_neh *neh; - - neh = kzalloc(sizeof(*neh), GFP_KERNEL); - if (neh == NULL) { - result = -ENOMEM; - goto error_kzalloc; - } - - kref_init(&neh->kref); - INIT_LIST_HEAD(&neh->list_node); - timer_setup(&neh->timer, uwb_rc_neh_timer, 0); - - neh->rc = rc; - neh->evt_type = expected_type; - neh->evt = cpu_to_le16(expected_event); - neh->cb = cb; - neh->arg = arg; - - spin_lock_irqsave(&rc->neh_lock, flags); - result = __uwb_rc_ctx_get(rc, neh); - if (result >= 0) { - cmd->bCommandContext = neh->context; - list_add_tail(&neh->list_node, &rc->neh_list); - uwb_rc_neh_get(neh); - } - spin_unlock_irqrestore(&rc->neh_lock, flags); - if (result < 0) - goto error_ctx_get; - - return neh; - -error_ctx_get: - kfree(neh); -error_kzalloc: - dev_err(dev, "cannot open handle to radio controller: %d\n", result); - return ERR_PTR(result); -} - -static void __uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh) -{ - __uwb_rc_ctx_put(rc, neh); - list_del(&neh->list_node); -} - -/** - * uwb_rc_neh_rm - remove a neh. - * @rc: the radio controller - * @neh: the neh to remove - * - * Remove an active neh immediately instead of waiting for the event - * (or a time out). - */ -void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh) -{ - unsigned long flags; - - spin_lock_irqsave(&rc->neh_lock, flags); - __uwb_rc_neh_rm(rc, neh); - spin_unlock_irqrestore(&rc->neh_lock, flags); - - del_timer_sync(&neh->timer); - uwb_rc_neh_put(neh); -} - -/** - * uwb_rc_neh_arm - arm an event handler timeout timer - * - * @rc: UWB Radio Controller - * @neh: Notification/event handler for @rc - * - * The timer is only armed if the neh is active. - */ -void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh) -{ - unsigned long flags; - - spin_lock_irqsave(&rc->neh_lock, flags); - if (neh->context) - mod_timer(&neh->timer, - jiffies + msecs_to_jiffies(UWB_RC_CMD_TIMEOUT_MS)); - spin_unlock_irqrestore(&rc->neh_lock, flags); -} - -static void uwb_rc_neh_cb(struct uwb_rc_neh *neh, struct uwb_rceb *rceb, size_t size) -{ - (*neh->cb)(neh->rc, neh->arg, rceb, size); - uwb_rc_neh_put(neh); -} - -static bool uwb_rc_neh_match(struct uwb_rc_neh *neh, const struct uwb_rceb *rceb) -{ - return neh->evt_type == rceb->bEventType - && neh->evt == rceb->wEvent - && neh->context == rceb->bEventContext; -} - -/** - * Find the handle waiting for a RC Radio Control Event - * - * @rc: UWB Radio Controller - * @rceb: Pointer to the RCEB buffer - * @event_size: Pointer to the size of the RCEB buffer. Might be - * adjusted to take into account the @neh->extra_size - * settings. - * - * If the listener has no buffer (NULL buffer), one is allocated for - * the right size (the amount of data received). @neh->ptr will point - * to the event payload, which always starts with a 'struct - * uwb_rceb'. kfree() it when done. - */ -static -struct uwb_rc_neh *uwb_rc_neh_lookup(struct uwb_rc *rc, - const struct uwb_rceb *rceb) -{ - struct uwb_rc_neh *neh = NULL, *h; - unsigned long flags; - - spin_lock_irqsave(&rc->neh_lock, flags); - - list_for_each_entry(h, &rc->neh_list, list_node) { - if (uwb_rc_neh_match(h, rceb)) { - neh = h; - break; - } - } - - if (neh) - __uwb_rc_neh_rm(rc, neh); - - spin_unlock_irqrestore(&rc->neh_lock, flags); - - return neh; -} - - -/* - * Process notifications coming from the radio control interface - * - * @rc: UWB Radio Control Interface descriptor - * @neh: Notification/Event Handler @neh->ptr points to - * @uwb_evt->buffer. - * - * This function is called by the event/notif handling subsystem when - * notifications arrive (hwarc_probe() arms a notification/event handle - * that calls back this function for every received notification; this - * function then will rearm itself). - * - * Notification data buffers are dynamically allocated by the NEH - * handling code in neh.c [uwb_rc_neh_lookup()]. What is actually - * allocated is space to contain the notification data. - * - * Buffers are prefixed with a Radio Control Event Block (RCEB) as - * defined by the WUSB Wired-Adapter Radio Control interface. We - * just use it for the notification code. - * - * On each case statement we just transcode endianess of the different - * fields. We declare a pointer to a RCI definition of an event, and - * then to a UWB definition of the same event (which are the same, - * remember). Event if we use different pointers - */ -static -void uwb_rc_notif(struct uwb_rc *rc, struct uwb_rceb *rceb, ssize_t size) -{ - struct device *dev = &rc->uwb_dev.dev; - struct uwb_event *uwb_evt; - - if (size == -ESHUTDOWN) - return; - if (size < 0) { - dev_err(dev, "ignoring event with error code %zu\n", - size); - return; - } - - uwb_evt = kzalloc(sizeof(*uwb_evt), GFP_ATOMIC); - if (unlikely(uwb_evt == NULL)) { - dev_err(dev, "no memory to queue event 0x%02x/%04x/%02x\n", - rceb->bEventType, le16_to_cpu(rceb->wEvent), - rceb->bEventContext); - return; - } - uwb_evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */ - uwb_evt->ts_jiffies = jiffies; - uwb_evt->type = UWB_EVT_TYPE_NOTIF; - uwb_evt->notif.size = size; - uwb_evt->notif.rceb = rceb; - - uwbd_event_queue(uwb_evt); -} - -static void uwb_rc_neh_grok_event(struct uwb_rc *rc, struct uwb_rceb *rceb, size_t size) -{ - struct device *dev = &rc->uwb_dev.dev; - struct uwb_rc_neh *neh; - struct uwb_rceb *notif; - unsigned long flags; - - if (rceb->bEventContext == 0) { - notif = kmalloc(size, GFP_ATOMIC); - if (notif) { - memcpy(notif, rceb, size); - uwb_rc_notif(rc, notif, size); - } else - dev_err(dev, "event 0x%02x/%04x/%02x (%zu bytes): no memory\n", - rceb->bEventType, le16_to_cpu(rceb->wEvent), - rceb->bEventContext, size); - } else { - neh = uwb_rc_neh_lookup(rc, rceb); - if (neh) { - spin_lock_irqsave(&rc->neh_lock, flags); - /* to guard against a timeout */ - neh->completed = 1; - del_timer(&neh->timer); - spin_unlock_irqrestore(&rc->neh_lock, flags); - uwb_rc_neh_cb(neh, rceb, size); - } else - dev_warn(dev, "event 0x%02x/%04x/%02x (%zu bytes): nobody cared\n", - rceb->bEventType, le16_to_cpu(rceb->wEvent), - rceb->bEventContext, size); - } -} - -/** - * Given a buffer with one or more UWB RC events/notifications, break - * them up and dispatch them. - * - * @rc: UWB Radio Controller - * @buf: Buffer with the stream of notifications/events - * @buf_size: Amount of data in the buffer - * - * Note each notification/event starts always with a 'struct - * uwb_rceb', so the minimum size if 4 bytes. - * - * The device may pass us events formatted differently than expected. - * These are first filtered, potentially creating a new event in a new - * memory location. If a new event is created by the filter it is also - * freed here. - * - * For each notif/event, tries to guess the size looking at the EST - * tables, then looks for a neh that is waiting for that event and if - * found, copies the payload to the neh's buffer and calls it back. If - * not, the data is ignored. - * - * Note that if we can't find a size description in the EST tables, we - * still might find a size in the 'neh' handle in uwb_rc_neh_lookup(). - * - * Assumptions: - * - * @rc->neh_lock is NOT taken - * - * We keep track of various sizes here: - * size: contains the size of the buffer that is processed for the - * incoming event. this buffer may contain events that are not - * formatted as WHCI. - * real_size: the actual space taken by this event in the buffer. - * We need to keep track of the real size of an event to be able to - * advance the buffer correctly. - * event_size: the size of the event as expected by the core layer - * [OR] the size of the event after filtering. if the filtering - * created a new event in a new memory location then this is - * effectively the size of a new event buffer - */ -void uwb_rc_neh_grok(struct uwb_rc *rc, void *buf, size_t buf_size) -{ - struct device *dev = &rc->uwb_dev.dev; - void *itr; - struct uwb_rceb *rceb; - size_t size, real_size, event_size; - int needtofree; - - itr = buf; - size = buf_size; - while (size > 0) { - if (size < sizeof(*rceb)) { - dev_err(dev, "not enough data in event buffer to " - "process incoming events (%zu left, minimum is " - "%zu)\n", size, sizeof(*rceb)); - break; - } - - rceb = itr; - if (rc->filter_event) { - needtofree = rc->filter_event(rc, &rceb, size, - &real_size, &event_size); - if (needtofree < 0 && needtofree != -ENOANO) { - dev_err(dev, "BUG: Unable to filter event " - "(0x%02x/%04x/%02x) from " - "device. \n", rceb->bEventType, - le16_to_cpu(rceb->wEvent), - rceb->bEventContext); - break; - } - } else - needtofree = -ENOANO; - /* do real processing if there was no filtering or the - * filtering didn't act */ - if (needtofree == -ENOANO) { - ssize_t ret = uwb_est_find_size(rc, rceb, size); - if (ret < 0) - break; - if (ret > size) { - dev_err(dev, "BUG: hw sent incomplete event " - "0x%02x/%04x/%02x (%zd bytes), only got " - "%zu bytes. We don't handle that.\n", - rceb->bEventType, le16_to_cpu(rceb->wEvent), - rceb->bEventContext, ret, size); - break; - } - real_size = event_size = ret; - } - uwb_rc_neh_grok_event(rc, rceb, event_size); - - if (needtofree == 1) - kfree(rceb); - - itr += real_size; - size -= real_size; - } -} -EXPORT_SYMBOL_GPL(uwb_rc_neh_grok); - - -/** - * The entity that reads from the device notification/event channel has - * detected an error. - * - * @rc: UWB Radio Controller - * @error: Errno error code - * - */ -void uwb_rc_neh_error(struct uwb_rc *rc, int error) -{ - struct uwb_rc_neh *neh; - unsigned long flags; - - for (;;) { - spin_lock_irqsave(&rc->neh_lock, flags); - if (list_empty(&rc->neh_list)) { - spin_unlock_irqrestore(&rc->neh_lock, flags); - break; - } - neh = list_first_entry(&rc->neh_list, struct uwb_rc_neh, list_node); - __uwb_rc_neh_rm(rc, neh); - spin_unlock_irqrestore(&rc->neh_lock, flags); - - del_timer_sync(&neh->timer); - uwb_rc_neh_cb(neh, NULL, error); - } -} -EXPORT_SYMBOL_GPL(uwb_rc_neh_error); - - -static void uwb_rc_neh_timer(struct timer_list *t) -{ - struct uwb_rc_neh *neh = from_timer(neh, t, timer); - struct uwb_rc *rc = neh->rc; - unsigned long flags; - - spin_lock_irqsave(&rc->neh_lock, flags); - if (neh->completed) { - spin_unlock_irqrestore(&rc->neh_lock, flags); - return; - } - if (neh->context) - __uwb_rc_neh_rm(rc, neh); - else - neh = NULL; - spin_unlock_irqrestore(&rc->neh_lock, flags); - - if (neh) - uwb_rc_neh_cb(neh, NULL, -ETIMEDOUT); -} - -/** Initializes the @rc's neh subsystem - */ -void uwb_rc_neh_create(struct uwb_rc *rc) -{ - spin_lock_init(&rc->neh_lock); - INIT_LIST_HEAD(&rc->neh_list); - set_bit(0, rc->ctx_bm); /* 0 is reserved (see [WUSB] table 8-65) */ - set_bit(0xff, rc->ctx_bm); /* and 0xff is invalid */ - rc->ctx_roll = 1; -} - - -/** Release's the @rc's neh subsystem */ -void uwb_rc_neh_destroy(struct uwb_rc *rc) -{ - unsigned long flags; - struct uwb_rc_neh *neh; - - for (;;) { - spin_lock_irqsave(&rc->neh_lock, flags); - if (list_empty(&rc->neh_list)) { - spin_unlock_irqrestore(&rc->neh_lock, flags); - break; - } - neh = list_first_entry(&rc->neh_list, struct uwb_rc_neh, list_node); - __uwb_rc_neh_rm(rc, neh); - spin_unlock_irqrestore(&rc->neh_lock, flags); - - del_timer_sync(&neh->timer); - uwb_rc_neh_put(neh); - } -} diff --git a/drivers/staging/uwb/pal.c b/drivers/staging/uwb/pal.c deleted file mode 100644 index a541e646a603..000000000000 --- a/drivers/staging/uwb/pal.c +++ /dev/null @@ -1,128 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * UWB PAL support. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/debugfs.h> -#include <linux/export.h> - -#include "uwb.h" -#include "uwb-internal.h" - -/** - * uwb_pal_init - initialize a UWB PAL - * @pal: the PAL to initialize - */ -void uwb_pal_init(struct uwb_pal *pal) -{ - INIT_LIST_HEAD(&pal->node); -} -EXPORT_SYMBOL_GPL(uwb_pal_init); - -/** - * uwb_pal_register - register a UWB PAL - * @pal: the PAL - * - * The PAL must be initialized with uwb_pal_init(). - */ -int uwb_pal_register(struct uwb_pal *pal) -{ - struct uwb_rc *rc = pal->rc; - int ret; - - if (pal->device) { - /* create a link to the uwb_rc in the PAL device's directory. */ - ret = sysfs_create_link(&pal->device->kobj, - &rc->uwb_dev.dev.kobj, "uwb_rc"); - if (ret < 0) - return ret; - /* create a link to the PAL in the UWB device's directory. */ - ret = sysfs_create_link(&rc->uwb_dev.dev.kobj, - &pal->device->kobj, pal->name); - if (ret < 0) { - sysfs_remove_link(&pal->device->kobj, "uwb_rc"); - return ret; - } - } - - pal->debugfs_dir = uwb_dbg_create_pal_dir(pal); - - mutex_lock(&rc->uwb_dev.mutex); - list_add(&pal->node, &rc->pals); - mutex_unlock(&rc->uwb_dev.mutex); - - return 0; -} -EXPORT_SYMBOL_GPL(uwb_pal_register); - -static int find_rc(struct device *dev, const void *data) -{ - const struct uwb_rc *target_rc = data; - struct uwb_rc *rc = dev_get_drvdata(dev); - - if (rc == NULL) { - WARN_ON(1); - return 0; - } - if (rc == target_rc) { - if (rc->ready == 0) - return 0; - else - return 1; - } - return 0; -} - -/** - * Given a radio controller descriptor see if it is registered. - * - * @returns false if the rc does not exist or is quiescing; true otherwise. - */ -static bool uwb_rc_class_device_exists(struct uwb_rc *target_rc) -{ - struct device *dev; - - dev = class_find_device(&uwb_rc_class, NULL, target_rc, find_rc); - - put_device(dev); - - return (dev != NULL); -} - -/** - * uwb_pal_unregister - unregister a UWB PAL - * @pal: the PAL - */ -void uwb_pal_unregister(struct uwb_pal *pal) -{ - struct uwb_rc *rc = pal->rc; - - uwb_radio_stop(pal); - - mutex_lock(&rc->uwb_dev.mutex); - list_del(&pal->node); - mutex_unlock(&rc->uwb_dev.mutex); - - debugfs_remove(pal->debugfs_dir); - - if (pal->device) { - /* remove link to the PAL in the UWB device's directory. */ - if (uwb_rc_class_device_exists(rc)) - sysfs_remove_link(&rc->uwb_dev.dev.kobj, pal->name); - - /* remove link to uwb_rc in the PAL device's directory. */ - sysfs_remove_link(&pal->device->kobj, "uwb_rc"); - } -} -EXPORT_SYMBOL_GPL(uwb_pal_unregister); - -/** - * uwb_rc_pal_init - initialize the PAL related parts of a radio controller - * @rc: the radio controller - */ -void uwb_rc_pal_init(struct uwb_rc *rc) -{ - INIT_LIST_HEAD(&rc->pals); -} diff --git a/drivers/staging/uwb/radio.c b/drivers/staging/uwb/radio.c deleted file mode 100644 index 6afb75ce1b5f..000000000000 --- a/drivers/staging/uwb/radio.c +++ /dev/null @@ -1,196 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * UWB radio (channel) management. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/export.h> - -#include "uwb.h" -#include "uwb-internal.h" - - -static int uwb_radio_select_channel(struct uwb_rc *rc) -{ - /* - * Default to channel 9 (BG1, TFC1) unless the user has - * selected a specific channel or there are no active PALs. - */ - if (rc->active_pals == 0) - return -1; - if (rc->beaconing_forced) - return rc->beaconing_forced; - return 9; -} - - -/* - * Notify all active PALs that the channel has changed. - */ -static void uwb_radio_channel_changed(struct uwb_rc *rc, int channel) -{ - struct uwb_pal *pal; - - list_for_each_entry(pal, &rc->pals, node) { - if (pal->channel && channel != pal->channel) { - pal->channel = channel; - if (pal->channel_changed) - pal->channel_changed(pal, pal->channel); - } - } -} - -/* - * Change to a new channel and notify any active PALs of the new - * channel. - * - * When stopping the radio, PALs need to be notified first so they can - * terminate any active reservations. - */ -static int uwb_radio_change_channel(struct uwb_rc *rc, int channel) -{ - int ret = 0; - struct device *dev = &rc->uwb_dev.dev; - - dev_dbg(dev, "%s: channel = %d, rc->beaconing = %d\n", __func__, - channel, rc->beaconing); - - if (channel == -1) - uwb_radio_channel_changed(rc, channel); - - if (channel != rc->beaconing) { - if (rc->beaconing != -1 && channel != -1) { - /* - * FIXME: should signal the channel change - * with a Channel Change IE. - */ - ret = uwb_radio_change_channel(rc, -1); - if (ret < 0) - return ret; - } - ret = uwb_rc_beacon(rc, channel, 0); - } - - if (channel != -1) - uwb_radio_channel_changed(rc, rc->beaconing); - - return ret; -} - -/** - * uwb_radio_start - request that the radio be started - * @pal: the PAL making the request. - * - * If the radio is not already active, a suitable channel is selected - * and beacons are started. - */ -int uwb_radio_start(struct uwb_pal *pal) -{ - struct uwb_rc *rc = pal->rc; - int ret = 0; - - mutex_lock(&rc->uwb_dev.mutex); - - if (!pal->channel) { - pal->channel = -1; - rc->active_pals++; - ret = uwb_radio_change_channel(rc, uwb_radio_select_channel(rc)); - } - - mutex_unlock(&rc->uwb_dev.mutex); - return ret; -} -EXPORT_SYMBOL_GPL(uwb_radio_start); - -/** - * uwb_radio_stop - request that the radio be stopped. - * @pal: the PAL making the request. - * - * Stops the radio if no other PAL is making use of it. - */ -void uwb_radio_stop(struct uwb_pal *pal) -{ - struct uwb_rc *rc = pal->rc; - - mutex_lock(&rc->uwb_dev.mutex); - - if (pal->channel) { - rc->active_pals--; - uwb_radio_change_channel(rc, uwb_radio_select_channel(rc)); - pal->channel = 0; - } - - mutex_unlock(&rc->uwb_dev.mutex); -} -EXPORT_SYMBOL_GPL(uwb_radio_stop); - -/* - * uwb_radio_force_channel - force a specific channel to be used - * @rc: the radio controller. - * @channel: the channel to use; -1 to force the radio to stop; 0 to - * use the default channel selection algorithm. - */ -int uwb_radio_force_channel(struct uwb_rc *rc, int channel) -{ - int ret = 0; - - mutex_lock(&rc->uwb_dev.mutex); - - rc->beaconing_forced = channel; - ret = uwb_radio_change_channel(rc, uwb_radio_select_channel(rc)); - - mutex_unlock(&rc->uwb_dev.mutex); - return ret; -} - -/* - * uwb_radio_setup - setup the radio manager - * @rc: the radio controller. - * - * The radio controller is reset to ensure it's in a known state - * before it's used. - */ -int uwb_radio_setup(struct uwb_rc *rc) -{ - return uwb_rc_reset(rc); -} - -/* - * uwb_radio_reset_state - reset any radio manager state - * @rc: the radio controller. - * - * All internal radio manager state is reset to values corresponding - * to a reset radio controller. - */ -void uwb_radio_reset_state(struct uwb_rc *rc) -{ - struct uwb_pal *pal; - - mutex_lock(&rc->uwb_dev.mutex); - - list_for_each_entry(pal, &rc->pals, node) { - if (pal->channel) { - pal->channel = -1; - if (pal->channel_changed) - pal->channel_changed(pal, -1); - } - } - - rc->beaconing = -1; - rc->scanning = -1; - - mutex_unlock(&rc->uwb_dev.mutex); -} - -/* - * uwb_radio_shutdown - shutdown the radio manager - * @rc: the radio controller. - * - * The radio controller is reset. - */ -void uwb_radio_shutdown(struct uwb_rc *rc) -{ - uwb_radio_reset_state(rc); - uwb_rc_reset(rc); -} diff --git a/drivers/staging/uwb/reset.c b/drivers/staging/uwb/reset.c deleted file mode 100644 index 8fc7c14d903e..000000000000 --- a/drivers/staging/uwb/reset.c +++ /dev/null @@ -1,379 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * UWB basic command support and radio reset - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: - * - * - docs - * - * - Now we are serializing (using the uwb_dev->mutex) the command - * execution; it should be parallelized as much as possible some - * day. - */ -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/export.h> - -#include "uwb-internal.h" - -/** - * Command result codes (WUSB1.0[T8-69]) - */ -static -const char *__strerror[] = { - "success", - "failure", - "hardware failure", - "no more slots", - "beacon is too large", - "invalid parameter", - "unsupported power level", - "time out (wa) or invalid ie data (whci)", - "beacon size exceeded", - "cancelled", - "invalid state", - "invalid size", - "ack not received", - "no more asie notification", -}; - - -/** Return a string matching the given error code */ -const char *uwb_rc_strerror(unsigned code) -{ - if (code == 255) - return "time out"; - if (code >= ARRAY_SIZE(__strerror)) - return "unknown error"; - return __strerror[code]; -} - -int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name, - struct uwb_rccb *cmd, size_t cmd_size, - u8 expected_type, u16 expected_event, - uwb_rc_cmd_cb_f cb, void *arg) -{ - struct device *dev = &rc->uwb_dev.dev; - struct uwb_rc_neh *neh; - int needtofree = 0; - int result; - - uwb_dev_lock(&rc->uwb_dev); /* Protect against rc->priv being removed */ - if (rc->priv == NULL) { - uwb_dev_unlock(&rc->uwb_dev); - return -ESHUTDOWN; - } - - if (rc->filter_cmd) { - needtofree = rc->filter_cmd(rc, &cmd, &cmd_size); - if (needtofree < 0 && needtofree != -ENOANO) { - dev_err(dev, "%s: filter error: %d\n", - cmd_name, needtofree); - uwb_dev_unlock(&rc->uwb_dev); - return needtofree; - } - } - - neh = uwb_rc_neh_add(rc, cmd, expected_type, expected_event, cb, arg); - if (IS_ERR(neh)) { - result = PTR_ERR(neh); - uwb_dev_unlock(&rc->uwb_dev); - goto out; - } - - result = rc->cmd(rc, cmd, cmd_size); - uwb_dev_unlock(&rc->uwb_dev); - if (result < 0) - uwb_rc_neh_rm(rc, neh); - else - uwb_rc_neh_arm(rc, neh); - uwb_rc_neh_put(neh); -out: - if (needtofree == 1) - kfree(cmd); - return result < 0 ? result : 0; -} -EXPORT_SYMBOL_GPL(uwb_rc_cmd_async); - -struct uwb_rc_cmd_done_params { - struct completion completion; - struct uwb_rceb *reply; - ssize_t reply_size; -}; - -static void uwb_rc_cmd_done(struct uwb_rc *rc, void *arg, - struct uwb_rceb *reply, ssize_t reply_size) -{ - struct uwb_rc_cmd_done_params *p = (struct uwb_rc_cmd_done_params *)arg; - - if (reply_size > 0) { - if (p->reply) - reply_size = min(p->reply_size, reply_size); - else - p->reply = kmalloc(reply_size, GFP_ATOMIC); - - if (p->reply) - memcpy(p->reply, reply, reply_size); - else - reply_size = -ENOMEM; - } - p->reply_size = reply_size; - complete(&p->completion); -} - - -/** - * Generic function for issuing commands to the Radio Control Interface - * - * @rc: UWB Radio Control descriptor - * @cmd_name: Name of the command being issued (for error messages) - * @cmd: Pointer to rccb structure containing the command; - * normally you embed this structure as the first member of - * the full command structure. - * @cmd_size: Size of the whole command buffer pointed to by @cmd. - * @reply: Pointer to where to store the reply - * @reply_size: @reply's size - * @expected_type: Expected type in the return event - * @expected_event: Expected event code in the return event - * @preply: Here a pointer to where the event data is received will - * be stored. Once done with the data, free with kfree(). - * - * This function is generic; it works for commands that return a fixed - * and known size or for commands that return a variable amount of data. - * - * If a buffer is provided, that is used, although it could be chopped - * to the maximum size of the buffer. If the buffer is NULL, then one - * be allocated in *preply with the whole contents of the reply. - * - * @rc needs to be referenced - */ -static -ssize_t __uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name, - struct uwb_rccb *cmd, size_t cmd_size, - struct uwb_rceb *reply, size_t reply_size, - u8 expected_type, u16 expected_event, - struct uwb_rceb **preply) -{ - ssize_t result = 0; - struct device *dev = &rc->uwb_dev.dev; - struct uwb_rc_cmd_done_params params; - - init_completion(¶ms.completion); - params.reply = reply; - params.reply_size = reply_size; - - result = uwb_rc_cmd_async(rc, cmd_name, cmd, cmd_size, - expected_type, expected_event, - uwb_rc_cmd_done, ¶ms); - if (result) - return result; - - wait_for_completion(¶ms.completion); - - if (preply) - *preply = params.reply; - - if (params.reply_size < 0) - dev_err(dev, "%s: confirmation event 0x%02x/%04x/%02x " - "reception failed: %d\n", cmd_name, - expected_type, expected_event, cmd->bCommandContext, - (int)params.reply_size); - return params.reply_size; -} - - -/** - * Generic function for issuing commands to the Radio Control Interface - * - * @rc: UWB Radio Control descriptor - * @cmd_name: Name of the command being issued (for error messages) - * @cmd: Pointer to rccb structure containing the command; - * normally you embed this structure as the first member of - * the full command structure. - * @cmd_size: Size of the whole command buffer pointed to by @cmd. - * @reply: Pointer to the beginning of the confirmation event - * buffer. Normally bigger than an 'struct hwarc_rceb'. - * You need to fill out reply->bEventType and reply->wEvent (in - * cpu order) as the function will use them to verify the - * confirmation event. - * @reply_size: Size of the reply buffer - * - * The function checks that the length returned in the reply is at - * least as big as @reply_size; if not, it will be deemed an error and - * -EIO returned. - * - * @rc needs to be referenced - */ -ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name, - struct uwb_rccb *cmd, size_t cmd_size, - struct uwb_rceb *reply, size_t reply_size) -{ - struct device *dev = &rc->uwb_dev.dev; - ssize_t result; - - result = __uwb_rc_cmd(rc, cmd_name, - cmd, cmd_size, reply, reply_size, - reply->bEventType, reply->wEvent, NULL); - - if (result > 0 && result < reply_size) { - dev_err(dev, "%s: not enough data returned for decoding reply " - "(%zu bytes received vs at least %zu needed)\n", - cmd_name, result, reply_size); - result = -EIO; - } - return result; -} -EXPORT_SYMBOL_GPL(uwb_rc_cmd); - - -/** - * Generic function for issuing commands to the Radio Control - * Interface that return an unknown amount of data - * - * @rc: UWB Radio Control descriptor - * @cmd_name: Name of the command being issued (for error messages) - * @cmd: Pointer to rccb structure containing the command; - * normally you embed this structure as the first member of - * the full command structure. - * @cmd_size: Size of the whole command buffer pointed to by @cmd. - * @expected_type: Expected type in the return event - * @expected_event: Expected event code in the return event - * @preply: Here a pointer to where the event data is received will - * be stored. Once done with the data, free with kfree(). - * - * The function checks that the length returned in the reply is at - * least as big as a 'struct uwb_rceb *'; if not, it will be deemed an - * error and -EIO returned. - * - * @rc needs to be referenced - */ -ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name, - struct uwb_rccb *cmd, size_t cmd_size, - u8 expected_type, u16 expected_event, - struct uwb_rceb **preply) -{ - return __uwb_rc_cmd(rc, cmd_name, cmd, cmd_size, NULL, 0, - expected_type, expected_event, preply); -} -EXPORT_SYMBOL_GPL(uwb_rc_vcmd); - - -/** - * Reset a UWB Host Controller (and all radio settings) - * - * @rc: Host Controller descriptor - * @returns: 0 if ok, < 0 errno code on error - * - * We put the command on kmalloc'ed memory as some arches cannot do - * USB from the stack. The reply event is copied from an stage buffer, - * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. - */ -int uwb_rc_reset(struct uwb_rc *rc) -{ - int result = -ENOMEM; - struct uwb_rc_evt_confirm reply; - struct uwb_rccb *cmd; - size_t cmd_size = sizeof(*cmd); - - mutex_lock(&rc->uwb_dev.mutex); - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (cmd == NULL) - goto error_kzalloc; - cmd->bCommandType = UWB_RC_CET_GENERAL; - cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET); - reply.rceb.bEventType = UWB_RC_CET_GENERAL; - reply.rceb.wEvent = UWB_RC_CMD_RESET; - result = uwb_rc_cmd(rc, "RESET", cmd, cmd_size, - &reply.rceb, sizeof(reply)); - if (result < 0) - goto error_cmd; - if (reply.bResultCode != UWB_RC_RES_SUCCESS) { - dev_err(&rc->uwb_dev.dev, - "RESET: command execution failed: %s (%d)\n", - uwb_rc_strerror(reply.bResultCode), reply.bResultCode); - result = -EIO; - } -error_cmd: - kfree(cmd); -error_kzalloc: - mutex_unlock(&rc->uwb_dev.mutex); - return result; -} - -int uwbd_msg_handle_reset(struct uwb_event *evt) -{ - struct uwb_rc *rc = evt->rc; - int ret; - - dev_info(&rc->uwb_dev.dev, "resetting radio controller\n"); - ret = rc->reset(rc); - if (ret < 0) { - dev_err(&rc->uwb_dev.dev, "failed to reset hardware: %d\n", ret); - goto error; - } - return 0; -error: - /* Nothing can be done except try the reset again. Wait a bit - to avoid reset loops during probe() or remove(). */ - msleep(1000); - uwb_rc_reset_all(rc); - return ret; -} - -/** - * uwb_rc_reset_all - request a reset of the radio controller and PALs - * @rc: the radio controller of the hardware device to be reset. - * - * The full hardware reset of the radio controller and all the PALs - * will be scheduled. - */ -void uwb_rc_reset_all(struct uwb_rc *rc) -{ - struct uwb_event *evt; - - evt = kzalloc(sizeof(struct uwb_event), GFP_ATOMIC); - if (unlikely(evt == NULL)) - return; - - evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */ - evt->ts_jiffies = jiffies; - evt->type = UWB_EVT_TYPE_MSG; - evt->message = UWB_EVT_MSG_RESET; - - uwbd_event_queue(evt); -} -EXPORT_SYMBOL_GPL(uwb_rc_reset_all); - -void uwb_rc_pre_reset(struct uwb_rc *rc) -{ - rc->stop(rc); - uwbd_flush(rc); - - uwb_radio_reset_state(rc); - uwb_rsv_remove_all(rc); -} -EXPORT_SYMBOL_GPL(uwb_rc_pre_reset); - -int uwb_rc_post_reset(struct uwb_rc *rc) -{ - int ret; - - ret = rc->start(rc); - if (ret) - goto out; - ret = uwb_rc_mac_addr_set(rc, &rc->uwb_dev.mac_addr); - if (ret) - goto out; - ret = uwb_rc_dev_addr_set(rc, &rc->uwb_dev.dev_addr); - if (ret) - goto out; -out: - return ret; -} -EXPORT_SYMBOL_GPL(uwb_rc_post_reset); diff --git a/drivers/staging/uwb/rsv.c b/drivers/staging/uwb/rsv.c deleted file mode 100644 index d593a41c3d8d..000000000000 --- a/drivers/staging/uwb/rsv.c +++ /dev/null @@ -1,1000 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * UWB reservation management. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/export.h> - -#include "uwb.h" -#include "uwb-internal.h" - -static void uwb_rsv_timer(struct timer_list *t); - -static const char *rsv_states[] = { - [UWB_RSV_STATE_NONE] = "none ", - [UWB_RSV_STATE_O_INITIATED] = "o initiated ", - [UWB_RSV_STATE_O_PENDING] = "o pending ", - [UWB_RSV_STATE_O_MODIFIED] = "o modified ", - [UWB_RSV_STATE_O_ESTABLISHED] = "o established ", - [UWB_RSV_STATE_O_TO_BE_MOVED] = "o to be moved ", - [UWB_RSV_STATE_O_MOVE_EXPANDING] = "o move expanding", - [UWB_RSV_STATE_O_MOVE_COMBINING] = "o move combining", - [UWB_RSV_STATE_O_MOVE_REDUCING] = "o move reducing ", - [UWB_RSV_STATE_T_ACCEPTED] = "t accepted ", - [UWB_RSV_STATE_T_CONFLICT] = "t conflict ", - [UWB_RSV_STATE_T_PENDING] = "t pending ", - [UWB_RSV_STATE_T_DENIED] = "t denied ", - [UWB_RSV_STATE_T_RESIZED] = "t resized ", - [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = "t expanding acc ", - [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = "t expanding conf", - [UWB_RSV_STATE_T_EXPANDING_PENDING] = "t expanding pend", - [UWB_RSV_STATE_T_EXPANDING_DENIED] = "t expanding den ", -}; - -static const char *rsv_types[] = { - [UWB_DRP_TYPE_ALIEN_BP] = "alien-bp", - [UWB_DRP_TYPE_HARD] = "hard", - [UWB_DRP_TYPE_SOFT] = "soft", - [UWB_DRP_TYPE_PRIVATE] = "private", - [UWB_DRP_TYPE_PCA] = "pca", -}; - -bool uwb_rsv_has_two_drp_ies(struct uwb_rsv *rsv) -{ - static const bool has_two_drp_ies[] = { - [UWB_RSV_STATE_O_INITIATED] = false, - [UWB_RSV_STATE_O_PENDING] = false, - [UWB_RSV_STATE_O_MODIFIED] = false, - [UWB_RSV_STATE_O_ESTABLISHED] = false, - [UWB_RSV_STATE_O_TO_BE_MOVED] = false, - [UWB_RSV_STATE_O_MOVE_COMBINING] = false, - [UWB_RSV_STATE_O_MOVE_REDUCING] = false, - [UWB_RSV_STATE_O_MOVE_EXPANDING] = true, - [UWB_RSV_STATE_T_ACCEPTED] = false, - [UWB_RSV_STATE_T_CONFLICT] = false, - [UWB_RSV_STATE_T_PENDING] = false, - [UWB_RSV_STATE_T_DENIED] = false, - [UWB_RSV_STATE_T_RESIZED] = false, - [UWB_RSV_STATE_T_EXPANDING_ACCEPTED] = true, - [UWB_RSV_STATE_T_EXPANDING_CONFLICT] = true, - [UWB_RSV_STATE_T_EXPANDING_PENDING] = true, - [UWB_RSV_STATE_T_EXPANDING_DENIED] = true, - }; - - return has_two_drp_ies[rsv->state]; -} - -/** - * uwb_rsv_state_str - return a string for a reservation state - * @state: the reservation state. - */ -const char *uwb_rsv_state_str(enum uwb_rsv_state state) -{ - if (state < UWB_RSV_STATE_NONE || state >= UWB_RSV_STATE_LAST) - return "unknown"; - return rsv_states[state]; -} -EXPORT_SYMBOL_GPL(uwb_rsv_state_str); - -/** - * uwb_rsv_type_str - return a string for a reservation type - * @type: the reservation type - */ -const char *uwb_rsv_type_str(enum uwb_drp_type type) -{ - if (type < UWB_DRP_TYPE_ALIEN_BP || type > UWB_DRP_TYPE_PCA) - return "invalid"; - return rsv_types[type]; -} -EXPORT_SYMBOL_GPL(uwb_rsv_type_str); - -void uwb_rsv_dump(char *text, struct uwb_rsv *rsv) -{ - struct device *dev = &rsv->rc->uwb_dev.dev; - struct uwb_dev_addr devaddr; - char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE]; - - uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr); - if (rsv->target.type == UWB_RSV_TARGET_DEV) - devaddr = rsv->target.dev->dev_addr; - else - devaddr = rsv->target.devaddr; - uwb_dev_addr_print(target, sizeof(target), &devaddr); - - dev_dbg(dev, "rsv %s %s -> %s: %s\n", - text, owner, target, uwb_rsv_state_str(rsv->state)); -} - -static void uwb_rsv_release(struct kref *kref) -{ - struct uwb_rsv *rsv = container_of(kref, struct uwb_rsv, kref); - - kfree(rsv); -} - -void uwb_rsv_get(struct uwb_rsv *rsv) -{ - kref_get(&rsv->kref); -} - -void uwb_rsv_put(struct uwb_rsv *rsv) -{ - kref_put(&rsv->kref, uwb_rsv_release); -} - -/* - * Get a free stream index for a reservation. - * - * If the target is a DevAddr (e.g., a WUSB cluster reservation) then - * the stream is allocated from a pool of per-RC stream indexes, - * otherwise a unique stream index for the target is selected. - */ -static int uwb_rsv_get_stream(struct uwb_rsv *rsv) -{ - struct uwb_rc *rc = rsv->rc; - struct device *dev = &rc->uwb_dev.dev; - unsigned long *streams_bm; - int stream; - - switch (rsv->target.type) { - case UWB_RSV_TARGET_DEV: - streams_bm = rsv->target.dev->streams; - break; - case UWB_RSV_TARGET_DEVADDR: - streams_bm = rc->uwb_dev.streams; - break; - default: - return -EINVAL; - } - - stream = find_first_zero_bit(streams_bm, UWB_NUM_STREAMS); - if (stream >= UWB_NUM_STREAMS) { - dev_err(dev, "%s: no available stream found\n", __func__); - return -EBUSY; - } - - rsv->stream = stream; - set_bit(stream, streams_bm); - - dev_dbg(dev, "get stream %d\n", rsv->stream); - - return 0; -} - -static void uwb_rsv_put_stream(struct uwb_rsv *rsv) -{ - struct uwb_rc *rc = rsv->rc; - struct device *dev = &rc->uwb_dev.dev; - unsigned long *streams_bm; - - switch (rsv->target.type) { - case UWB_RSV_TARGET_DEV: - streams_bm = rsv->target.dev->streams; - break; - case UWB_RSV_TARGET_DEVADDR: - streams_bm = rc->uwb_dev.streams; - break; - default: - return; - } - - clear_bit(rsv->stream, streams_bm); - - dev_dbg(dev, "put stream %d\n", rsv->stream); -} - -void uwb_rsv_backoff_win_timer(struct timer_list *t) -{ - struct uwb_drp_backoff_win *bow = from_timer(bow, t, timer); - struct uwb_rc *rc = container_of(bow, struct uwb_rc, bow); - struct device *dev = &rc->uwb_dev.dev; - - bow->can_reserve_extra_mases = true; - if (bow->total_expired <= 4) { - bow->total_expired++; - } else { - /* after 4 backoff window has expired we can exit from - * the backoff procedure */ - bow->total_expired = 0; - bow->window = UWB_DRP_BACKOFF_WIN_MIN >> 1; - } - dev_dbg(dev, "backoff_win_timer total_expired=%d, n=%d\n", bow->total_expired, bow->n); - - /* try to relocate all the "to be moved" relocations */ - uwb_rsv_handle_drp_avail_change(rc); -} - -void uwb_rsv_backoff_win_increment(struct uwb_rc *rc) -{ - struct uwb_drp_backoff_win *bow = &rc->bow; - struct device *dev = &rc->uwb_dev.dev; - unsigned timeout_us; - - dev_dbg(dev, "backoff_win_increment: window=%d\n", bow->window); - - bow->can_reserve_extra_mases = false; - - if((bow->window << 1) == UWB_DRP_BACKOFF_WIN_MAX) - return; - - bow->window <<= 1; - bow->n = prandom_u32() & (bow->window - 1); - dev_dbg(dev, "new_window=%d, n=%d\n", bow->window, bow->n); - - /* reset the timer associated variables */ - timeout_us = bow->n * UWB_SUPERFRAME_LENGTH_US; - bow->total_expired = 0; - mod_timer(&bow->timer, jiffies + usecs_to_jiffies(timeout_us)); -} - -static void uwb_rsv_stroke_timer(struct uwb_rsv *rsv) -{ - int sframes = UWB_MAX_LOST_BEACONS; - - /* - * Multicast reservations can become established within 1 - * super frame and should not be terminated if no response is - * received. - */ - if (rsv->state == UWB_RSV_STATE_NONE) { - sframes = 0; - } else if (rsv->is_multicast) { - if (rsv->state == UWB_RSV_STATE_O_INITIATED - || rsv->state == UWB_RSV_STATE_O_MOVE_EXPANDING - || rsv->state == UWB_RSV_STATE_O_MOVE_COMBINING - || rsv->state == UWB_RSV_STATE_O_MOVE_REDUCING) - sframes = 1; - if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED) - sframes = 0; - - } - - if (sframes > 0) { - /* - * Add an additional 2 superframes to account for the - * time to send the SET DRP IE command. - */ - unsigned timeout_us = (sframes + 2) * UWB_SUPERFRAME_LENGTH_US; - mod_timer(&rsv->timer, jiffies + usecs_to_jiffies(timeout_us)); - } else - del_timer(&rsv->timer); -} - -/* - * Update a reservations state, and schedule an update of the - * transmitted DRP IEs. - */ -static void uwb_rsv_state_update(struct uwb_rsv *rsv, - enum uwb_rsv_state new_state) -{ - rsv->state = new_state; - rsv->ie_valid = false; - - uwb_rsv_dump("SU", rsv); - - uwb_rsv_stroke_timer(rsv); - uwb_rsv_sched_update(rsv->rc); -} - -static void uwb_rsv_callback(struct uwb_rsv *rsv) -{ - if (rsv->callback) - rsv->callback(rsv); -} - -void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state) -{ - struct uwb_rsv_move *mv = &rsv->mv; - - if (rsv->state == new_state) { - switch (rsv->state) { - case UWB_RSV_STATE_O_ESTABLISHED: - case UWB_RSV_STATE_O_MOVE_EXPANDING: - case UWB_RSV_STATE_O_MOVE_COMBINING: - case UWB_RSV_STATE_O_MOVE_REDUCING: - case UWB_RSV_STATE_T_ACCEPTED: - case UWB_RSV_STATE_T_EXPANDING_ACCEPTED: - case UWB_RSV_STATE_T_RESIZED: - case UWB_RSV_STATE_NONE: - uwb_rsv_stroke_timer(rsv); - break; - default: - /* Expecting a state transition so leave timer - as-is. */ - break; - } - return; - } - - uwb_rsv_dump("SC", rsv); - - switch (new_state) { - case UWB_RSV_STATE_NONE: - uwb_rsv_state_update(rsv, UWB_RSV_STATE_NONE); - uwb_rsv_remove(rsv); - uwb_rsv_callback(rsv); - break; - case UWB_RSV_STATE_O_INITIATED: - uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_INITIATED); - break; - case UWB_RSV_STATE_O_PENDING: - uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_PENDING); - break; - case UWB_RSV_STATE_O_MODIFIED: - /* in the companion there are the MASes to drop */ - bitmap_andnot(rsv->mas.bm, rsv->mas.bm, mv->companion_mas.bm, UWB_NUM_MAS); - uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MODIFIED); - break; - case UWB_RSV_STATE_O_ESTABLISHED: - if (rsv->state == UWB_RSV_STATE_O_MODIFIED - || rsv->state == UWB_RSV_STATE_O_MOVE_REDUCING) { - uwb_drp_avail_release(rsv->rc, &mv->companion_mas); - rsv->needs_release_companion_mas = false; - } - uwb_drp_avail_reserve(rsv->rc, &rsv->mas); - uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_ESTABLISHED); - uwb_rsv_callback(rsv); - break; - case UWB_RSV_STATE_O_MOVE_EXPANDING: - rsv->needs_release_companion_mas = true; - uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING); - break; - case UWB_RSV_STATE_O_MOVE_COMBINING: - rsv->needs_release_companion_mas = false; - uwb_drp_avail_reserve(rsv->rc, &mv->companion_mas); - bitmap_or(rsv->mas.bm, rsv->mas.bm, mv->companion_mas.bm, UWB_NUM_MAS); - rsv->mas.safe += mv->companion_mas.safe; - rsv->mas.unsafe += mv->companion_mas.unsafe; - uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_COMBINING); - break; - case UWB_RSV_STATE_O_MOVE_REDUCING: - bitmap_andnot(mv->companion_mas.bm, rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS); - rsv->needs_release_companion_mas = true; - rsv->mas.safe = mv->final_mas.safe; - rsv->mas.unsafe = mv->final_mas.unsafe; - bitmap_copy(rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS); - bitmap_copy(rsv->mas.unsafe_bm, mv->final_mas.unsafe_bm, UWB_NUM_MAS); - uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_MOVE_REDUCING); - break; - case UWB_RSV_STATE_T_ACCEPTED: - case UWB_RSV_STATE_T_RESIZED: - rsv->needs_release_companion_mas = false; - uwb_drp_avail_reserve(rsv->rc, &rsv->mas); - uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_ACCEPTED); - uwb_rsv_callback(rsv); - break; - case UWB_RSV_STATE_T_DENIED: - uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_DENIED); - break; - case UWB_RSV_STATE_T_CONFLICT: - uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_CONFLICT); - break; - case UWB_RSV_STATE_T_PENDING: - uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_PENDING); - break; - case UWB_RSV_STATE_T_EXPANDING_ACCEPTED: - rsv->needs_release_companion_mas = true; - uwb_drp_avail_reserve(rsv->rc, &mv->companion_mas); - uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_EXPANDING_ACCEPTED); - break; - default: - dev_err(&rsv->rc->uwb_dev.dev, "unhandled state: %s (%d)\n", - uwb_rsv_state_str(new_state), new_state); - } -} - -static void uwb_rsv_handle_timeout_work(struct work_struct *work) -{ - struct uwb_rsv *rsv = container_of(work, struct uwb_rsv, - handle_timeout_work); - struct uwb_rc *rc = rsv->rc; - - mutex_lock(&rc->rsvs_mutex); - - uwb_rsv_dump("TO", rsv); - - switch (rsv->state) { - case UWB_RSV_STATE_O_INITIATED: - if (rsv->is_multicast) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); - goto unlock; - } - break; - case UWB_RSV_STATE_O_MOVE_EXPANDING: - if (rsv->is_multicast) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_COMBINING); - goto unlock; - } - break; - case UWB_RSV_STATE_O_MOVE_COMBINING: - if (rsv->is_multicast) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_REDUCING); - goto unlock; - } - break; - case UWB_RSV_STATE_O_MOVE_REDUCING: - if (rsv->is_multicast) { - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); - goto unlock; - } - break; - case UWB_RSV_STATE_O_ESTABLISHED: - if (rsv->is_multicast) - goto unlock; - break; - case UWB_RSV_STATE_T_EXPANDING_ACCEPTED: - /* - * The time out could be for the main or of the - * companion DRP, assume it's for the companion and - * drop that first. A further time out is required to - * drop the main. - */ - uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED); - uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas); - goto unlock; - case UWB_RSV_STATE_NONE: - goto unlock; - default: - break; - } - - uwb_rsv_remove(rsv); - -unlock: - mutex_unlock(&rc->rsvs_mutex); -} - -static struct uwb_rsv *uwb_rsv_alloc(struct uwb_rc *rc) -{ - struct uwb_rsv *rsv; - - rsv = kzalloc(sizeof(struct uwb_rsv), GFP_KERNEL); - if (!rsv) - return NULL; - - INIT_LIST_HEAD(&rsv->rc_node); - INIT_LIST_HEAD(&rsv->pal_node); - kref_init(&rsv->kref); - timer_setup(&rsv->timer, uwb_rsv_timer, 0); - - rsv->rc = rc; - INIT_WORK(&rsv->handle_timeout_work, uwb_rsv_handle_timeout_work); - - return rsv; -} - -/** - * uwb_rsv_create - allocate and initialize a UWB reservation structure - * @rc: the radio controller - * @cb: callback to use when the reservation completes or terminates - * @pal_priv: data private to the PAL to be passed in the callback - * - * The callback is called when the state of the reservation changes from: - * - * - pending to accepted - * - pending to denined - * - accepted to terminated - * - pending to terminated - */ -struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb, void *pal_priv) -{ - struct uwb_rsv *rsv; - - rsv = uwb_rsv_alloc(rc); - if (!rsv) - return NULL; - - rsv->callback = cb; - rsv->pal_priv = pal_priv; - - return rsv; -} -EXPORT_SYMBOL_GPL(uwb_rsv_create); - -void uwb_rsv_remove(struct uwb_rsv *rsv) -{ - uwb_rsv_dump("RM", rsv); - - if (rsv->state != UWB_RSV_STATE_NONE) - uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); - - if (rsv->needs_release_companion_mas) - uwb_drp_avail_release(rsv->rc, &rsv->mv.companion_mas); - uwb_drp_avail_release(rsv->rc, &rsv->mas); - - if (uwb_rsv_is_owner(rsv)) - uwb_rsv_put_stream(rsv); - - uwb_dev_put(rsv->owner); - if (rsv->target.type == UWB_RSV_TARGET_DEV) - uwb_dev_put(rsv->target.dev); - - list_del_init(&rsv->rc_node); - uwb_rsv_put(rsv); -} - -/** - * uwb_rsv_destroy - free a UWB reservation structure - * @rsv: the reservation to free - * - * The reservation must already be terminated. - */ -void uwb_rsv_destroy(struct uwb_rsv *rsv) -{ - uwb_rsv_put(rsv); -} -EXPORT_SYMBOL_GPL(uwb_rsv_destroy); - -/** - * usb_rsv_establish - start a reservation establishment - * @rsv: the reservation - * - * The PAL should fill in @rsv's owner, target, type, max_mas, - * min_mas, max_interval and is_multicast fields. If the target is a - * uwb_dev it must be referenced. - * - * The reservation's callback will be called when the reservation is - * accepted, denied or times out. - */ -int uwb_rsv_establish(struct uwb_rsv *rsv) -{ - struct uwb_rc *rc = rsv->rc; - struct uwb_mas_bm available; - struct device *dev = &rc->uwb_dev.dev; - int ret; - - mutex_lock(&rc->rsvs_mutex); - ret = uwb_rsv_get_stream(rsv); - if (ret) { - dev_err(dev, "%s: uwb_rsv_get_stream failed: %d\n", - __func__, ret); - goto out; - } - - rsv->tiebreaker = prandom_u32() & 1; - /* get available mas bitmap */ - uwb_drp_available(rc, &available); - - ret = uwb_rsv_find_best_allocation(rsv, &available, &rsv->mas); - if (ret == UWB_RSV_ALLOC_NOT_FOUND) { - ret = -EBUSY; - uwb_rsv_put_stream(rsv); - dev_err(dev, "%s: uwb_rsv_find_best_allocation failed: %d\n", - __func__, ret); - goto out; - } - - ret = uwb_drp_avail_reserve_pending(rc, &rsv->mas); - if (ret != 0) { - uwb_rsv_put_stream(rsv); - dev_err(dev, "%s: uwb_drp_avail_reserve_pending failed: %d\n", - __func__, ret); - goto out; - } - - uwb_rsv_get(rsv); - list_add_tail(&rsv->rc_node, &rc->reservations); - rsv->owner = &rc->uwb_dev; - uwb_dev_get(rsv->owner); - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_INITIATED); -out: - mutex_unlock(&rc->rsvs_mutex); - return ret; -} -EXPORT_SYMBOL_GPL(uwb_rsv_establish); - -/** - * uwb_rsv_modify - modify an already established reservation - * @rsv: the reservation to modify - * @max_mas: new maximum MAS to reserve - * @min_mas: new minimum MAS to reserve - * @max_interval: new max_interval to use - * - * FIXME: implement this once there are PALs that use it. - */ -int uwb_rsv_modify(struct uwb_rsv *rsv, int max_mas, int min_mas, int max_interval) -{ - return -ENOSYS; -} -EXPORT_SYMBOL_GPL(uwb_rsv_modify); - -/* - * move an already established reservation (rc->rsvs_mutex must to be - * taken when tis function is called) - */ -int uwb_rsv_try_move(struct uwb_rsv *rsv, struct uwb_mas_bm *available) -{ - struct uwb_rc *rc = rsv->rc; - struct uwb_drp_backoff_win *bow = &rc->bow; - struct device *dev = &rc->uwb_dev.dev; - struct uwb_rsv_move *mv; - int ret = 0; - - if (!bow->can_reserve_extra_mases) - return -EBUSY; - - mv = &rsv->mv; - - if (uwb_rsv_find_best_allocation(rsv, available, &mv->final_mas) == UWB_RSV_ALLOC_FOUND) { - - if (!bitmap_equal(rsv->mas.bm, mv->final_mas.bm, UWB_NUM_MAS)) { - /* We want to move the reservation */ - bitmap_andnot(mv->companion_mas.bm, mv->final_mas.bm, rsv->mas.bm, UWB_NUM_MAS); - uwb_drp_avail_reserve_pending(rc, &mv->companion_mas); - uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_MOVE_EXPANDING); - } - } else { - dev_dbg(dev, "new allocation not found\n"); - } - - return ret; -} - -/* It will try to move every reservation in state O_ESTABLISHED giving - * to the MAS allocator algorithm an availability that is the real one - * plus the allocation already established from the reservation. */ -void uwb_rsv_handle_drp_avail_change(struct uwb_rc *rc) -{ - struct uwb_drp_backoff_win *bow = &rc->bow; - struct uwb_rsv *rsv; - struct uwb_mas_bm mas; - - if (!bow->can_reserve_extra_mases) - return; - - list_for_each_entry(rsv, &rc->reservations, rc_node) { - if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED || - rsv->state == UWB_RSV_STATE_O_TO_BE_MOVED) { - uwb_drp_available(rc, &mas); - bitmap_or(mas.bm, mas.bm, rsv->mas.bm, UWB_NUM_MAS); - uwb_rsv_try_move(rsv, &mas); - } - } - -} - -/** - * uwb_rsv_terminate - terminate an established reservation - * @rsv: the reservation to terminate - * - * A reservation is terminated by removing the DRP IE from the beacon, - * the other end will consider the reservation to be terminated when - * it does not see the DRP IE for at least mMaxLostBeacons. - * - * If applicable, the reference to the target uwb_dev will be released. - */ -void uwb_rsv_terminate(struct uwb_rsv *rsv) -{ - struct uwb_rc *rc = rsv->rc; - - mutex_lock(&rc->rsvs_mutex); - - if (rsv->state != UWB_RSV_STATE_NONE) - uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); - - mutex_unlock(&rc->rsvs_mutex); -} -EXPORT_SYMBOL_GPL(uwb_rsv_terminate); - -/** - * uwb_rsv_accept - accept a new reservation from a peer - * @rsv: the reservation - * @cb: call back for reservation changes - * @pal_priv: data to be passed in the above call back - * - * Reservation requests from peers are denied unless a PAL accepts it - * by calling this function. - * - * The PAL call uwb_rsv_destroy() for all accepted reservations before - * calling uwb_pal_unregister(). - */ -void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv) -{ - uwb_rsv_get(rsv); - - rsv->callback = cb; - rsv->pal_priv = pal_priv; - rsv->state = UWB_RSV_STATE_T_ACCEPTED; -} -EXPORT_SYMBOL_GPL(uwb_rsv_accept); - -/* - * Is a received DRP IE for this reservation? - */ -static bool uwb_rsv_match(struct uwb_rsv *rsv, struct uwb_dev *src, - struct uwb_ie_drp *drp_ie) -{ - struct uwb_dev_addr *rsv_src; - int stream; - - stream = uwb_ie_drp_stream_index(drp_ie); - - if (rsv->stream != stream) - return false; - - switch (rsv->target.type) { - case UWB_RSV_TARGET_DEVADDR: - return rsv->stream == stream; - case UWB_RSV_TARGET_DEV: - if (uwb_ie_drp_owner(drp_ie)) - rsv_src = &rsv->owner->dev_addr; - else - rsv_src = &rsv->target.dev->dev_addr; - return uwb_dev_addr_cmp(&src->dev_addr, rsv_src) == 0; - } - return false; -} - -static struct uwb_rsv *uwb_rsv_new_target(struct uwb_rc *rc, - struct uwb_dev *src, - struct uwb_ie_drp *drp_ie) -{ - struct uwb_rsv *rsv; - struct uwb_pal *pal; - enum uwb_rsv_state state; - - rsv = uwb_rsv_alloc(rc); - if (!rsv) - return NULL; - - rsv->rc = rc; - rsv->owner = src; - uwb_dev_get(rsv->owner); - rsv->target.type = UWB_RSV_TARGET_DEV; - rsv->target.dev = &rc->uwb_dev; - uwb_dev_get(&rc->uwb_dev); - rsv->type = uwb_ie_drp_type(drp_ie); - rsv->stream = uwb_ie_drp_stream_index(drp_ie); - uwb_drp_ie_to_bm(&rsv->mas, drp_ie); - - /* - * See if any PALs are interested in this reservation. If not, - * deny the request. - */ - rsv->state = UWB_RSV_STATE_T_DENIED; - mutex_lock(&rc->uwb_dev.mutex); - list_for_each_entry(pal, &rc->pals, node) { - if (pal->new_rsv) - pal->new_rsv(pal, rsv); - if (rsv->state == UWB_RSV_STATE_T_ACCEPTED) - break; - } - mutex_unlock(&rc->uwb_dev.mutex); - - list_add_tail(&rsv->rc_node, &rc->reservations); - state = rsv->state; - rsv->state = UWB_RSV_STATE_NONE; - - /* FIXME: do something sensible here */ - if (state == UWB_RSV_STATE_T_ACCEPTED - && uwb_drp_avail_reserve_pending(rc, &rsv->mas) == -EBUSY) { - /* FIXME: do something sensible here */ - } else { - uwb_rsv_set_state(rsv, state); - } - - return rsv; -} - -/** - * uwb_rsv_get_usable_mas - get the bitmap of the usable MAS of a reservations - * @rsv: the reservation. - * @mas: returns the available MAS. - * - * The usable MAS of a reservation may be less than the negotiated MAS - * if alien BPs are present. - */ -void uwb_rsv_get_usable_mas(struct uwb_rsv *rsv, struct uwb_mas_bm *mas) -{ - bitmap_zero(mas->bm, UWB_NUM_MAS); - bitmap_andnot(mas->bm, rsv->mas.bm, rsv->rc->cnflt_alien_bitmap.bm, UWB_NUM_MAS); -} -EXPORT_SYMBOL_GPL(uwb_rsv_get_usable_mas); - -/** - * uwb_rsv_find - find a reservation for a received DRP IE. - * @rc: the radio controller - * @src: source of the DRP IE - * @drp_ie: the DRP IE - * - * If the reservation cannot be found and the DRP IE is from a peer - * attempting to establish a new reservation, create a new reservation - * and add it to the list. - */ -struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src, - struct uwb_ie_drp *drp_ie) -{ - struct uwb_rsv *rsv; - - list_for_each_entry(rsv, &rc->reservations, rc_node) { - if (uwb_rsv_match(rsv, src, drp_ie)) - return rsv; - } - - if (uwb_ie_drp_owner(drp_ie)) - return uwb_rsv_new_target(rc, src, drp_ie); - - return NULL; -} - -/* - * Go through all the reservations and check for timeouts and (if - * necessary) update their DRP IEs. - * - * FIXME: look at building the SET_DRP_IE command here rather than - * having to rescan the list in uwb_rc_send_all_drp_ie(). - */ -static bool uwb_rsv_update_all(struct uwb_rc *rc) -{ - struct uwb_rsv *rsv, *t; - bool ie_updated = false; - - list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { - if (!rsv->ie_valid) { - uwb_drp_ie_update(rsv); - ie_updated = true; - } - } - - return ie_updated; -} - -void uwb_rsv_queue_update(struct uwb_rc *rc) -{ - unsigned long delay_us = UWB_MAS_LENGTH_US * UWB_MAS_PER_ZONE; - - queue_delayed_work(rc->rsv_workq, &rc->rsv_update_work, usecs_to_jiffies(delay_us)); -} - -/** - * uwb_rsv_sched_update - schedule an update of the DRP IEs - * @rc: the radio controller. - * - * To improve performance and ensure correctness with [ECMA-368] the - * number of SET-DRP-IE commands that are done are limited. - * - * DRP IEs update come from two sources: DRP events from the hardware - * which all occur at the beginning of the superframe ('syncronous' - * events) and reservation establishment/termination requests from - * PALs or timers ('asynchronous' events). - * - * A delayed work ensures that all the synchronous events result in - * one SET-DRP-IE command. - * - * Additional logic (the set_drp_ie_pending and rsv_updated_postponed - * flags) will prevent an asynchrous event starting a SET-DRP-IE - * command if one is currently awaiting a response. - * - * FIXME: this does leave a window where an asynchrous event can delay - * the SET-DRP-IE for a synchronous event by one superframe. - */ -void uwb_rsv_sched_update(struct uwb_rc *rc) -{ - spin_lock_irq(&rc->rsvs_lock); - if (!delayed_work_pending(&rc->rsv_update_work)) { - if (rc->set_drp_ie_pending > 0) { - rc->set_drp_ie_pending++; - goto unlock; - } - uwb_rsv_queue_update(rc); - } -unlock: - spin_unlock_irq(&rc->rsvs_lock); -} - -/* - * Update DRP IEs and, if necessary, the DRP Availability IE and send - * the updated IEs to the radio controller. - */ -static void uwb_rsv_update_work(struct work_struct *work) -{ - struct uwb_rc *rc = container_of(work, struct uwb_rc, - rsv_update_work.work); - bool ie_updated; - - mutex_lock(&rc->rsvs_mutex); - - ie_updated = uwb_rsv_update_all(rc); - - if (!rc->drp_avail.ie_valid) { - uwb_drp_avail_ie_update(rc); - ie_updated = true; - } - - if (ie_updated && (rc->set_drp_ie_pending == 0)) - uwb_rc_send_all_drp_ie(rc); - - mutex_unlock(&rc->rsvs_mutex); -} - -static void uwb_rsv_alien_bp_work(struct work_struct *work) -{ - struct uwb_rc *rc = container_of(work, struct uwb_rc, - rsv_alien_bp_work.work); - struct uwb_rsv *rsv; - - mutex_lock(&rc->rsvs_mutex); - - list_for_each_entry(rsv, &rc->reservations, rc_node) { - if (rsv->type != UWB_DRP_TYPE_ALIEN_BP) { - uwb_rsv_callback(rsv); - } - } - - mutex_unlock(&rc->rsvs_mutex); -} - -static void uwb_rsv_timer(struct timer_list *t) -{ - struct uwb_rsv *rsv = from_timer(rsv, t, timer); - - queue_work(rsv->rc->rsv_workq, &rsv->handle_timeout_work); -} - -/** - * uwb_rsv_remove_all - remove all reservations - * @rc: the radio controller - * - * A DRP IE update is not done. - */ -void uwb_rsv_remove_all(struct uwb_rc *rc) -{ - struct uwb_rsv *rsv, *t; - - mutex_lock(&rc->rsvs_mutex); - list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { - if (rsv->state != UWB_RSV_STATE_NONE) - uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); - del_timer_sync(&rsv->timer); - } - /* Cancel any postponed update. */ - rc->set_drp_ie_pending = 0; - mutex_unlock(&rc->rsvs_mutex); - - cancel_delayed_work_sync(&rc->rsv_update_work); - flush_workqueue(rc->rsv_workq); - - mutex_lock(&rc->rsvs_mutex); - list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { - uwb_rsv_remove(rsv); - } - mutex_unlock(&rc->rsvs_mutex); -} - -void uwb_rsv_init(struct uwb_rc *rc) -{ - INIT_LIST_HEAD(&rc->reservations); - INIT_LIST_HEAD(&rc->cnflt_alien_list); - mutex_init(&rc->rsvs_mutex); - spin_lock_init(&rc->rsvs_lock); - INIT_DELAYED_WORK(&rc->rsv_update_work, uwb_rsv_update_work); - INIT_DELAYED_WORK(&rc->rsv_alien_bp_work, uwb_rsv_alien_bp_work); - rc->bow.can_reserve_extra_mases = true; - rc->bow.total_expired = 0; - rc->bow.window = UWB_DRP_BACKOFF_WIN_MIN >> 1; - timer_setup(&rc->bow.timer, uwb_rsv_backoff_win_timer, 0); - - bitmap_complement(rc->uwb_dev.streams, rc->uwb_dev.streams, UWB_NUM_STREAMS); -} - -int uwb_rsv_setup(struct uwb_rc *rc) -{ - char name[16]; - - snprintf(name, sizeof(name), "%s_rsvd", dev_name(&rc->uwb_dev.dev)); - rc->rsv_workq = create_singlethread_workqueue(name); - if (rc->rsv_workq == NULL) - return -ENOMEM; - - return 0; -} - -void uwb_rsv_cleanup(struct uwb_rc *rc) -{ - uwb_rsv_remove_all(rc); - destroy_workqueue(rc->rsv_workq); -} diff --git a/drivers/staging/uwb/scan.c b/drivers/staging/uwb/scan.c deleted file mode 100644 index ffc3f452302d..000000000000 --- a/drivers/staging/uwb/scan.c +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Scanning management - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - * FIXME: there are issues here on how BEACON and SCAN on USB RCI deal - * with each other. Currently seems that START_BEACON while - * SCAN_ONLY will cancel the scan, so we need to update the - * state here. Clarification request sent by email on - * 10/05/2005. - * 10/28/2005 No clear answer heard--maybe we'll hack the API - * so that when we start beaconing, if the HC is - * scanning in a mode not compatible with beaconing - * we just fail. - */ - -#include <linux/device.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/stat.h> -#include "uwb-internal.h" - - -/** - * Start/stop scanning in a radio controller - * - * @rc: UWB Radio Controller - * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12] - * @type: Type of scanning to do. - * @bpst_offset: value at which to start scanning (if type == - * UWB_SCAN_ONLY_STARTTIME) - * @returns: 0 if ok, < 0 errno code on error - * - * We put the command on kmalloc'ed memory as some arches cannot do - * USB from the stack. The reply event is copied from an stage buffer, - * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. - */ -int uwb_rc_scan(struct uwb_rc *rc, - unsigned channel, enum uwb_scan_type type, - unsigned bpst_offset) -{ - int result; - struct uwb_rc_cmd_scan *cmd; - struct uwb_rc_evt_confirm reply; - - result = -ENOMEM; - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (cmd == NULL) - goto error_kzalloc; - mutex_lock(&rc->uwb_dev.mutex); - cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; - cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SCAN); - cmd->bChannelNumber = channel; - cmd->bScanState = type; - cmd->wStartTime = cpu_to_le16(bpst_offset); - reply.rceb.bEventType = UWB_RC_CET_GENERAL; - reply.rceb.wEvent = UWB_RC_CMD_SCAN; - result = uwb_rc_cmd(rc, "SCAN", &cmd->rccb, sizeof(*cmd), - &reply.rceb, sizeof(reply)); - if (result < 0) - goto error_cmd; - if (reply.bResultCode != UWB_RC_RES_SUCCESS) { - dev_err(&rc->uwb_dev.dev, - "SCAN: command execution failed: %s (%d)\n", - uwb_rc_strerror(reply.bResultCode), reply.bResultCode); - result = -EIO; - goto error_cmd; - } - rc->scanning = channel; - rc->scan_type = type; -error_cmd: - mutex_unlock(&rc->uwb_dev.mutex); - kfree(cmd); -error_kzalloc: - return result; -} - -/* - * Print scanning state - */ -static ssize_t uwb_rc_scan_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_rc *rc = uwb_dev->rc; - ssize_t result; - - mutex_lock(&rc->uwb_dev.mutex); - result = sprintf(buf, "%d %d\n", rc->scanning, rc->scan_type); - mutex_unlock(&rc->uwb_dev.mutex); - return result; -} - -/* - * - */ -static ssize_t uwb_rc_scan_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - struct uwb_rc *rc = uwb_dev->rc; - unsigned channel; - unsigned type; - unsigned bpst_offset = 0; - ssize_t result = -EINVAL; - - result = sscanf(buf, "%u %u %u\n", &channel, &type, &bpst_offset); - if (result >= 2 && type < UWB_SCAN_TOP) - result = uwb_rc_scan(rc, channel, type, bpst_offset); - - return result < 0 ? result : size; -} - -/** Radio Control sysfs interface (declaration) */ -DEVICE_ATTR(scan, S_IRUGO | S_IWUSR, uwb_rc_scan_show, uwb_rc_scan_store); diff --git a/drivers/staging/uwb/umc-bus.c b/drivers/staging/uwb/umc-bus.c deleted file mode 100644 index 8b931f66a720..000000000000 --- a/drivers/staging/uwb/umc-bus.c +++ /dev/null @@ -1,211 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Bus for UWB Multi-interface Controller capabilities. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/sysfs.h> -#include <linux/workqueue.h> -#include <linux/module.h> -#include <linux/pci.h> -#include "include/umc.h" - -static int umc_bus_pre_reset_helper(struct device *dev, void *data) -{ - int ret = 0; - - if (dev->driver) { - struct umc_dev *umc = to_umc_dev(dev); - struct umc_driver *umc_drv = to_umc_driver(dev->driver); - - if (umc_drv->pre_reset) - ret = umc_drv->pre_reset(umc); - else - device_release_driver(dev); - } - return ret; -} - -static int umc_bus_post_reset_helper(struct device *dev, void *data) -{ - int ret = 0; - - if (dev->driver) { - struct umc_dev *umc = to_umc_dev(dev); - struct umc_driver *umc_drv = to_umc_driver(dev->driver); - - if (umc_drv->post_reset) - ret = umc_drv->post_reset(umc); - } else - ret = device_attach(dev); - - return ret; -} - -/** - * umc_controller_reset - reset the whole UMC controller - * @umc: the UMC device for the radio controller. - * - * Drivers or all capabilities of the controller will have their - * pre_reset methods called or be unbound from their device. Then all - * post_reset methods will be called or the drivers will be rebound. - * - * Radio controllers must provide pre_reset and post_reset methods and - * reset the hardware in their start method. - * - * If this is called while a probe() or remove() is in progress it - * will return -EAGAIN and not perform the reset. - */ -int umc_controller_reset(struct umc_dev *umc) -{ - struct device *parent = umc->dev.parent; - int ret = 0; - - if (!device_trylock(parent)) - return -EAGAIN; - ret = device_for_each_child(parent, parent, umc_bus_pre_reset_helper); - if (ret >= 0) - ret = device_for_each_child(parent, parent, umc_bus_post_reset_helper); - device_unlock(parent); - - return ret; -} -EXPORT_SYMBOL_GPL(umc_controller_reset); - -/** - * umc_match_pci_id - match a UMC driver to a UMC device's parent PCI device. - * @umc_drv: umc driver with match_data pointing to a zero-terminated - * table of pci_device_id's. - * @umc: umc device whose parent is to be matched. - */ -int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc) -{ - const struct pci_device_id *id_table = umc_drv->match_data; - struct pci_dev *pci; - - if (!dev_is_pci(umc->dev.parent)) - return 0; - - pci = to_pci_dev(umc->dev.parent); - return pci_match_id(id_table, pci) != NULL; -} -EXPORT_SYMBOL_GPL(umc_match_pci_id); - -static int umc_bus_rescan_helper(struct device *dev, void *data) -{ - int ret = 0; - - if (!dev->driver) - ret = device_attach(dev); - - return ret; -} - -static void umc_bus_rescan(struct device *parent) -{ - int err; - - /* - * We can't use bus_rescan_devices() here as it deadlocks when - * it tries to retake the dev->parent semaphore. - */ - err = device_for_each_child(parent, NULL, umc_bus_rescan_helper); - if (err < 0) - printk(KERN_WARNING "%s: rescan of bus failed: %d\n", - KBUILD_MODNAME, err); -} - -static int umc_bus_match(struct device *dev, struct device_driver *drv) -{ - struct umc_dev *umc = to_umc_dev(dev); - struct umc_driver *umc_driver = to_umc_driver(drv); - - if (umc->cap_id == umc_driver->cap_id) { - if (umc_driver->match) - return umc_driver->match(umc_driver, umc); - else - return 1; - } - return 0; -} - -static int umc_device_probe(struct device *dev) -{ - struct umc_dev *umc; - struct umc_driver *umc_driver; - int err; - - umc_driver = to_umc_driver(dev->driver); - umc = to_umc_dev(dev); - - get_device(dev); - err = umc_driver->probe(umc); - if (err) - put_device(dev); - else - umc_bus_rescan(dev->parent); - - return err; -} - -static int umc_device_remove(struct device *dev) -{ - struct umc_dev *umc; - struct umc_driver *umc_driver; - - umc_driver = to_umc_driver(dev->driver); - umc = to_umc_dev(dev); - - umc_driver->remove(umc); - put_device(dev); - return 0; -} - -static ssize_t capability_id_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct umc_dev *umc = to_umc_dev(dev); - - return sprintf(buf, "0x%02x\n", umc->cap_id); -} -static DEVICE_ATTR_RO(capability_id); - -static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct umc_dev *umc = to_umc_dev(dev); - - return sprintf(buf, "0x%04x\n", umc->version); -} -static DEVICE_ATTR_RO(version); - -static struct attribute *umc_dev_attrs[] = { - &dev_attr_capability_id.attr, - &dev_attr_version.attr, - NULL, -}; -ATTRIBUTE_GROUPS(umc_dev); - -struct bus_type umc_bus_type = { - .name = "umc", - .match = umc_bus_match, - .probe = umc_device_probe, - .remove = umc_device_remove, - .dev_groups = umc_dev_groups, -}; -EXPORT_SYMBOL_GPL(umc_bus_type); - -static int __init umc_bus_init(void) -{ - return bus_register(&umc_bus_type); -} -module_init(umc_bus_init); - -static void __exit umc_bus_exit(void) -{ - bus_unregister(&umc_bus_type); -} -module_exit(umc_bus_exit); - -MODULE_DESCRIPTION("UWB Multi-interface Controller capability bus"); -MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/uwb/umc-dev.c b/drivers/staging/uwb/umc-dev.c deleted file mode 100644 index 0c71caae00be..000000000000 --- a/drivers/staging/uwb/umc-dev.c +++ /dev/null @@ -1,94 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * UWB Multi-interface Controller device management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/export.h> -#include <linux/slab.h> -#include "include/umc.h" - -static void umc_device_release(struct device *dev) -{ - struct umc_dev *umc = to_umc_dev(dev); - - kfree(umc); -} - -/** - * umc_device_create - allocate a child UMC device - * @parent: parent of the new UMC device. - * @n: index of the new device. - * - * The new UMC device will have a bus ID of the parent with '-n' - * appended. - */ -struct umc_dev *umc_device_create(struct device *parent, int n) -{ - struct umc_dev *umc; - - umc = kzalloc(sizeof(struct umc_dev), GFP_KERNEL); - if (umc) { - dev_set_name(&umc->dev, "%s-%d", dev_name(parent), n); - umc->dev.parent = parent; - umc->dev.bus = &umc_bus_type; - umc->dev.release = umc_device_release; - - umc->dev.dma_mask = parent->dma_mask; - } - return umc; -} -EXPORT_SYMBOL_GPL(umc_device_create); - -/** - * umc_device_register - register a UMC device - * @umc: pointer to the UMC device - * - * The memory resource for the UMC device is acquired and the device - * registered with the system. - */ -int umc_device_register(struct umc_dev *umc) -{ - int err; - - err = request_resource(umc->resource.parent, &umc->resource); - if (err < 0) { - dev_err(&umc->dev, "can't allocate resource range %pR: %d\n", - &umc->resource, err); - goto error_request_resource; - } - - err = device_register(&umc->dev); - if (err < 0) - goto error_device_register; - return 0; - -error_device_register: - put_device(&umc->dev); - release_resource(&umc->resource); -error_request_resource: - return err; -} -EXPORT_SYMBOL_GPL(umc_device_register); - -/** - * umc_device_unregister - unregister a UMC device - * @umc: pointer to the UMC device - * - * First we unregister the device, make sure the driver can do it's - * resource release thing and then we try to release any left over - * resources. We take a ref to the device, to make sure it doesn't - * disappear under our feet. - */ -void umc_device_unregister(struct umc_dev *umc) -{ - struct device *dev; - if (!umc) - return; - dev = get_device(&umc->dev); - device_unregister(&umc->dev); - release_resource(&umc->resource); - put_device(dev); -} -EXPORT_SYMBOL_GPL(umc_device_unregister); diff --git a/drivers/staging/uwb/umc-drv.c b/drivers/staging/uwb/umc-drv.c deleted file mode 100644 index ed3bd220e8c2..000000000000 --- a/drivers/staging/uwb/umc-drv.c +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * UWB Multi-interface Controller driver management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/export.h> -#include "include/umc.h" - -int __umc_driver_register(struct umc_driver *umc_drv, struct module *module, - const char *mod_name) -{ - umc_drv->driver.name = umc_drv->name; - umc_drv->driver.owner = module; - umc_drv->driver.mod_name = mod_name; - umc_drv->driver.bus = &umc_bus_type; - - return driver_register(&umc_drv->driver); -} -EXPORT_SYMBOL_GPL(__umc_driver_register); - -/** - * umc_driver_register - unregister a UMC capabiltity driver. - * @umc_drv: pointer to the driver. - */ -void umc_driver_unregister(struct umc_driver *umc_drv) -{ - driver_unregister(&umc_drv->driver); -} -EXPORT_SYMBOL_GPL(umc_driver_unregister); diff --git a/drivers/staging/uwb/uwb-debug.c b/drivers/staging/uwb/uwb-debug.c deleted file mode 100644 index dd14df219ef8..000000000000 --- a/drivers/staging/uwb/uwb-debug.c +++ /dev/null @@ -1,354 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Debug support - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - * - * FIXME: doc - */ - -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/notifier.h> -#include <linux/device.h> -#include <linux/debugfs.h> -#include <linux/uaccess.h> -#include <linux/seq_file.h> - -#include "include/debug-cmd.h" -#include "uwb-internal.h" - -/* - * Debug interface - * - * Per radio controller debugfs files (in uwb/uwbN/): - * - * command: Flexible command interface (see <linux/uwb/debug-cmd.h>). - * - * reservations: information on reservations. - * - * accept: Set to true (Y or 1) to accept reservation requests from - * peers. - * - * drp_avail: DRP availability information. - */ - -struct uwb_dbg { - struct uwb_pal pal; - - bool accept; - struct list_head rsvs; - - struct dentry *root_d; - struct dentry *command_f; - struct dentry *reservations_f; - struct dentry *accept_f; - struct dentry *drp_avail_f; - spinlock_t list_lock; -}; - -static struct dentry *root_dir; - -static void uwb_dbg_rsv_cb(struct uwb_rsv *rsv) -{ - struct uwb_dbg *dbg = rsv->pal_priv; - - uwb_rsv_dump("debug", rsv); - - if (rsv->state == UWB_RSV_STATE_NONE) { - spin_lock(&dbg->list_lock); - list_del(&rsv->pal_node); - spin_unlock(&dbg->list_lock); - uwb_rsv_destroy(rsv); - } -} - -static int cmd_rsv_establish(struct uwb_rc *rc, - struct uwb_dbg_cmd_rsv_establish *cmd) -{ - struct uwb_mac_addr macaddr; - struct uwb_rsv *rsv; - struct uwb_dev *target; - int ret; - - memcpy(&macaddr, cmd->target, sizeof(macaddr)); - target = uwb_dev_get_by_macaddr(rc, &macaddr); - if (target == NULL) - return -ENODEV; - - rsv = uwb_rsv_create(rc, uwb_dbg_rsv_cb, rc->dbg); - if (rsv == NULL) { - uwb_dev_put(target); - return -ENOMEM; - } - - rsv->target.type = UWB_RSV_TARGET_DEV; - rsv->target.dev = target; - rsv->type = cmd->type; - rsv->max_mas = cmd->max_mas; - rsv->min_mas = cmd->min_mas; - rsv->max_interval = cmd->max_interval; - - ret = uwb_rsv_establish(rsv); - if (ret) - uwb_rsv_destroy(rsv); - else { - spin_lock(&(rc->dbg)->list_lock); - list_add_tail(&rsv->pal_node, &rc->dbg->rsvs); - spin_unlock(&(rc->dbg)->list_lock); - } - return ret; -} - -static int cmd_rsv_terminate(struct uwb_rc *rc, - struct uwb_dbg_cmd_rsv_terminate *cmd) -{ - struct uwb_rsv *rsv, *found = NULL; - int i = 0; - - spin_lock(&(rc->dbg)->list_lock); - - list_for_each_entry(rsv, &rc->dbg->rsvs, pal_node) { - if (i == cmd->index) { - found = rsv; - uwb_rsv_get(found); - break; - } - i++; - } - - spin_unlock(&(rc->dbg)->list_lock); - - if (!found) - return -EINVAL; - - uwb_rsv_terminate(found); - uwb_rsv_put(found); - - return 0; -} - -static int cmd_ie_add(struct uwb_rc *rc, struct uwb_dbg_cmd_ie *ie_to_add) -{ - return uwb_rc_ie_add(rc, - (const struct uwb_ie_hdr *) ie_to_add->data, - ie_to_add->len); -} - -static int cmd_ie_rm(struct uwb_rc *rc, struct uwb_dbg_cmd_ie *ie_to_rm) -{ - return uwb_rc_ie_rm(rc, ie_to_rm->data[0]); -} - -static ssize_t command_write(struct file *file, const char __user *buf, - size_t len, loff_t *off) -{ - struct uwb_rc *rc = file->private_data; - struct uwb_dbg_cmd cmd; - int ret = 0; - - if (len != sizeof(struct uwb_dbg_cmd)) - return -EINVAL; - - if (copy_from_user(&cmd, buf, len) != 0) - return -EFAULT; - - switch (cmd.type) { - case UWB_DBG_CMD_RSV_ESTABLISH: - ret = cmd_rsv_establish(rc, &cmd.rsv_establish); - break; - case UWB_DBG_CMD_RSV_TERMINATE: - ret = cmd_rsv_terminate(rc, &cmd.rsv_terminate); - break; - case UWB_DBG_CMD_IE_ADD: - ret = cmd_ie_add(rc, &cmd.ie_add); - break; - case UWB_DBG_CMD_IE_RM: - ret = cmd_ie_rm(rc, &cmd.ie_rm); - break; - case UWB_DBG_CMD_RADIO_START: - ret = uwb_radio_start(&rc->dbg->pal); - break; - case UWB_DBG_CMD_RADIO_STOP: - uwb_radio_stop(&rc->dbg->pal); - break; - default: - return -EINVAL; - } - - return ret < 0 ? ret : len; -} - -static const struct file_operations command_fops = { - .open = simple_open, - .write = command_write, - .read = NULL, - .llseek = no_llseek, - .owner = THIS_MODULE, -}; - -static int reservations_show(struct seq_file *s, void *p) -{ - struct uwb_rc *rc = s->private; - struct uwb_rsv *rsv; - - mutex_lock(&rc->rsvs_mutex); - - list_for_each_entry(rsv, &rc->reservations, rc_node) { - struct uwb_dev_addr devaddr; - char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE]; - bool is_owner; - - uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr); - if (rsv->target.type == UWB_RSV_TARGET_DEV) { - devaddr = rsv->target.dev->dev_addr; - is_owner = &rc->uwb_dev == rsv->owner; - } else { - devaddr = rsv->target.devaddr; - is_owner = true; - } - uwb_dev_addr_print(target, sizeof(target), &devaddr); - - seq_printf(s, "%c %s -> %s: %s\n", - is_owner ? 'O' : 'T', - owner, target, uwb_rsv_state_str(rsv->state)); - seq_printf(s, " stream: %d type: %s\n", - rsv->stream, uwb_rsv_type_str(rsv->type)); - seq_printf(s, " %*pb\n", UWB_NUM_MAS, rsv->mas.bm); - } - - mutex_unlock(&rc->rsvs_mutex); - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(reservations); - -static int drp_avail_show(struct seq_file *s, void *p) -{ - struct uwb_rc *rc = s->private; - - seq_printf(s, "global: %*pb\n", UWB_NUM_MAS, rc->drp_avail.global); - seq_printf(s, "local: %*pb\n", UWB_NUM_MAS, rc->drp_avail.local); - seq_printf(s, "pending: %*pb\n", UWB_NUM_MAS, rc->drp_avail.pending); - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(drp_avail); - -static void uwb_dbg_channel_changed(struct uwb_pal *pal, int channel) -{ - struct device *dev = &pal->rc->uwb_dev.dev; - - if (channel > 0) - dev_info(dev, "debug: channel %d started\n", channel); - else - dev_info(dev, "debug: channel stopped\n"); -} - -static void uwb_dbg_new_rsv(struct uwb_pal *pal, struct uwb_rsv *rsv) -{ - struct uwb_dbg *dbg = container_of(pal, struct uwb_dbg, pal); - - if (dbg->accept) { - spin_lock(&dbg->list_lock); - list_add_tail(&rsv->pal_node, &dbg->rsvs); - spin_unlock(&dbg->list_lock); - uwb_rsv_accept(rsv, uwb_dbg_rsv_cb, dbg); - } -} - -/** - * uwb_dbg_add_rc - add a debug interface for a radio controller - * @rc: the radio controller - */ -void uwb_dbg_add_rc(struct uwb_rc *rc) -{ - rc->dbg = kzalloc(sizeof(struct uwb_dbg), GFP_KERNEL); - if (rc->dbg == NULL) - return; - - INIT_LIST_HEAD(&rc->dbg->rsvs); - spin_lock_init(&(rc->dbg)->list_lock); - - uwb_pal_init(&rc->dbg->pal); - rc->dbg->pal.rc = rc; - rc->dbg->pal.channel_changed = uwb_dbg_channel_changed; - rc->dbg->pal.new_rsv = uwb_dbg_new_rsv; - uwb_pal_register(&rc->dbg->pal); - - if (root_dir) { - rc->dbg->root_d = debugfs_create_dir(dev_name(&rc->uwb_dev.dev), - root_dir); - rc->dbg->command_f = debugfs_create_file("command", 0200, - rc->dbg->root_d, rc, - &command_fops); - rc->dbg->reservations_f = debugfs_create_file("reservations", 0444, - rc->dbg->root_d, rc, - &reservations_fops); - rc->dbg->accept_f = debugfs_create_bool("accept", 0644, - rc->dbg->root_d, - &rc->dbg->accept); - rc->dbg->drp_avail_f = debugfs_create_file("drp_avail", 0444, - rc->dbg->root_d, rc, - &drp_avail_fops); - } -} - -/** - * uwb_dbg_del_rc - remove a radio controller's debug interface - * @rc: the radio controller - */ -void uwb_dbg_del_rc(struct uwb_rc *rc) -{ - struct uwb_rsv *rsv, *t; - - if (rc->dbg == NULL) - return; - - list_for_each_entry_safe(rsv, t, &rc->dbg->rsvs, pal_node) { - uwb_rsv_terminate(rsv); - } - - uwb_pal_unregister(&rc->dbg->pal); - - if (root_dir) { - debugfs_remove(rc->dbg->drp_avail_f); - debugfs_remove(rc->dbg->accept_f); - debugfs_remove(rc->dbg->reservations_f); - debugfs_remove(rc->dbg->command_f); - debugfs_remove(rc->dbg->root_d); - } -} - -/** - * uwb_dbg_exit - initialize the debug interface sub-module - */ -void uwb_dbg_init(void) -{ - root_dir = debugfs_create_dir("uwb", NULL); -} - -/** - * uwb_dbg_exit - clean-up the debug interface sub-module - */ -void uwb_dbg_exit(void) -{ - debugfs_remove(root_dir); -} - -/** - * uwb_dbg_create_pal_dir - create a debugfs directory for a PAL - * @pal: The PAL. - */ -struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal) -{ - struct uwb_rc *rc = pal->rc; - - if (root_dir && rc->dbg && rc->dbg->root_d && pal->name) - return debugfs_create_dir(pal->name, rc->dbg->root_d); - return NULL; -} diff --git a/drivers/staging/uwb/uwb-internal.h b/drivers/staging/uwb/uwb-internal.h deleted file mode 100644 index 4c2fdac7f610..000000000000 --- a/drivers/staging/uwb/uwb-internal.h +++ /dev/null @@ -1,366 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Ultra Wide Band - * UWB internal API - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This contains most of the internal API for UWB. This is stuff used - * across the stack that of course, is of no interest to the rest. - * - * Some parts might end up going public (like uwb_rc_*())... - */ - -#ifndef __UWB_INTERNAL_H__ -#define __UWB_INTERNAL_H__ - -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/mutex.h> -#include "uwb.h" - -struct uwb_beca_e; - -/* General device API */ -extern void uwb_dev_init(struct uwb_dev *uwb_dev); -extern int __uwb_dev_offair(struct uwb_dev *, struct uwb_rc *); -extern int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev, - struct uwb_rc *parent_rc); -extern void uwb_dev_rm(struct uwb_dev *uwb_dev); -extern void uwbd_dev_onair(struct uwb_rc *, struct uwb_beca_e *); -extern void uwbd_dev_offair(struct uwb_beca_e *); -void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event); - -/* General UWB Radio Controller Internal API */ -extern struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *); -static inline struct uwb_rc *__uwb_rc_get(struct uwb_rc *rc) -{ - uwb_dev_get(&rc->uwb_dev); - return rc; -} - -static inline void __uwb_rc_put(struct uwb_rc *rc) -{ - if (rc) - uwb_dev_put(&rc->uwb_dev); -} - -extern int uwb_rc_reset(struct uwb_rc *rc); -extern int uwb_rc_beacon(struct uwb_rc *rc, - int channel, unsigned bpst_offset); -extern int uwb_rc_scan(struct uwb_rc *rc, - unsigned channel, enum uwb_scan_type type, - unsigned bpst_offset); -extern int uwb_rc_send_all_drp_ie(struct uwb_rc *rc); - -void uwb_rc_ie_init(struct uwb_rc *); -int uwb_rc_ie_setup(struct uwb_rc *); -void uwb_rc_ie_release(struct uwb_rc *); -int uwb_ie_dump_hex(const struct uwb_ie_hdr *ies, size_t len, - char *buf, size_t size); -int uwb_rc_set_ie(struct uwb_rc *, struct uwb_rc_cmd_set_ie *); - - -extern const char *uwb_rc_strerror(unsigned code); - -/* - * Time to wait for a response to an RC command. - * - * Some commands can take a long time to response. e.g., START_BEACON - * may scan for several superframes before joining an existing beacon - * group and this can take around 600 ms. - */ -#define UWB_RC_CMD_TIMEOUT_MS 1000 /* ms */ - -/* - * Notification/Event Handlers - */ - -struct uwb_rc_neh; - -extern int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name, - struct uwb_rccb *cmd, size_t cmd_size, - u8 expected_type, u16 expected_event, - uwb_rc_cmd_cb_f cb, void *arg); - - -void uwb_rc_neh_create(struct uwb_rc *rc); -void uwb_rc_neh_destroy(struct uwb_rc *rc); - -struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd, - u8 expected_type, u16 expected_event, - uwb_rc_cmd_cb_f cb, void *arg); -void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh); -void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh); -void uwb_rc_neh_put(struct uwb_rc_neh *neh); - -/* Event size tables */ -extern int uwb_est_create(void); -extern void uwb_est_destroy(void); - -/* - * UWB conflicting alien reservations - */ -struct uwb_cnflt_alien { - struct uwb_rc *rc; - struct list_head rc_node; - struct uwb_mas_bm mas; - struct timer_list timer; - struct work_struct cnflt_update_work; -}; - -enum uwb_uwb_rsv_alloc_result { - UWB_RSV_ALLOC_FOUND = 0, - UWB_RSV_ALLOC_NOT_FOUND, -}; - -enum uwb_rsv_mas_status { - UWB_RSV_MAS_NOT_AVAIL = 1, - UWB_RSV_MAS_SAFE, - UWB_RSV_MAS_UNSAFE, -}; - -struct uwb_rsv_col_set_info { - unsigned char start_col; - unsigned char interval; - unsigned char safe_mas_per_col; - unsigned char unsafe_mas_per_col; -}; - -struct uwb_rsv_col_info { - unsigned char max_avail_safe; - unsigned char max_avail_unsafe; - unsigned char highest_mas[UWB_MAS_PER_ZONE]; - struct uwb_rsv_col_set_info csi; -}; - -struct uwb_rsv_row_info { - unsigned char avail[UWB_MAS_PER_ZONE]; - unsigned char free_rows; - unsigned char used_rows; -}; - -/* - * UWB find allocation - */ -struct uwb_rsv_alloc_info { - unsigned char bm[UWB_MAS_PER_ZONE * UWB_NUM_ZONES]; - struct uwb_rsv_col_info ci[UWB_NUM_ZONES]; - struct uwb_rsv_row_info ri; - struct uwb_mas_bm *not_available; - struct uwb_mas_bm *result; - int min_mas; - int max_mas; - int max_interval; - int total_allocated_mases; - int safe_allocated_mases; - int unsafe_allocated_mases; - int interval; -}; - -int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv, - struct uwb_mas_bm *available, - struct uwb_mas_bm *result); -void uwb_rsv_handle_drp_avail_change(struct uwb_rc *rc); -/* - * UWB Events & management daemon - */ - -/** - * enum uwb_event_type - types of UWB management daemon events - * - * The UWB management daemon (uwbd) can receive two types of events: - * UWB_EVT_TYPE_NOTIF - notification from the radio controller. - * UWB_EVT_TYPE_MSG - a simple message. - */ -enum uwb_event_type { - UWB_EVT_TYPE_NOTIF, - UWB_EVT_TYPE_MSG, -}; - -/** - * struct uwb_event_notif - an event for a radio controller notification - * @size: Size of the buffer (ie: Guaranteed to contain at least - * a full 'struct uwb_rceb') - * @rceb: Pointer to a kmalloced() event payload - */ -struct uwb_event_notif { - size_t size; - struct uwb_rceb *rceb; -}; - -/** - * enum uwb_event_message - an event for a message for asynchronous processing - * - * UWB_EVT_MSG_RESET - reset the radio controller and all PAL hardware. - */ -enum uwb_event_message { - UWB_EVT_MSG_RESET, -}; - -/** - * UWB Event - * @rc: Radio controller that emitted the event (referenced) - * @ts_jiffies: Timestamp, when was it received - * @type: This event's type. - */ -struct uwb_event { - struct list_head list_node; - struct uwb_rc *rc; - unsigned long ts_jiffies; - enum uwb_event_type type; - union { - struct uwb_event_notif notif; - enum uwb_event_message message; - }; -}; - -extern void uwbd_start(struct uwb_rc *rc); -extern void uwbd_stop(struct uwb_rc *rc); -extern struct uwb_event *uwb_event_alloc(size_t, gfp_t gfp_mask); -extern void uwbd_event_queue(struct uwb_event *); -void uwbd_flush(struct uwb_rc *rc); - -/* UWB event handlers */ -extern int uwbd_evt_handle_rc_ie_rcv(struct uwb_event *); -extern int uwbd_evt_handle_rc_beacon(struct uwb_event *); -extern int uwbd_evt_handle_rc_beacon_size(struct uwb_event *); -extern int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *); -extern int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *); -extern int uwbd_evt_handle_rc_drp(struct uwb_event *); -extern int uwbd_evt_handle_rc_drp_avail(struct uwb_event *); - -int uwbd_msg_handle_reset(struct uwb_event *evt); - - -/* - * Address management - */ -int uwb_rc_dev_addr_assign(struct uwb_rc *rc); -int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt); - -/* - * UWB Beacon Cache - * - * Each beacon we received is kept in a cache--when we receive that - * beacon consistently, that means there is a new device that we have - * to add to the system. - */ - -extern unsigned long beacon_timeout_ms; - -/** - * Beacon cache entry - * - * @jiffies_refresh: last time a beacon was received that refreshed - * this cache entry. - * @uwb_dev: device connected to this beacon. This pointer is not - * safe, you need to get it with uwb_dev_try_get() - * - * @hits: how many time we have seen this beacon since last time we - * cleared it - */ -struct uwb_beca_e { - struct mutex mutex; - struct kref refcnt; - struct list_head node; - struct uwb_mac_addr *mac_addr; - struct uwb_dev_addr dev_addr; - u8 hits; - unsigned long ts_jiffies; - struct uwb_dev *uwb_dev; - struct uwb_rc_evt_beacon *be; - struct stats lqe_stats, rssi_stats; /* radio statistics */ -}; -struct uwb_beacon_frame; -extern ssize_t uwb_bce_print_IEs(struct uwb_dev *, struct uwb_beca_e *, - char *, size_t); - -extern void uwb_bce_kfree(struct kref *_bce); -static inline void uwb_bce_get(struct uwb_beca_e *bce) -{ - kref_get(&bce->refcnt); -} -static inline void uwb_bce_put(struct uwb_beca_e *bce) -{ - kref_put(&bce->refcnt, uwb_bce_kfree); -} -extern void uwb_beca_purge(struct uwb_rc *rc); -extern void uwb_beca_release(struct uwb_rc *rc); - -struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc, - const struct uwb_dev_addr *devaddr); -struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc, - const struct uwb_mac_addr *macaddr); - -int uwb_radio_setup(struct uwb_rc *rc); -void uwb_radio_reset_state(struct uwb_rc *rc); -void uwb_radio_shutdown(struct uwb_rc *rc); -int uwb_radio_force_channel(struct uwb_rc *rc, int channel); - -/* -- UWB Sysfs representation */ -extern struct class uwb_rc_class; -extern struct bus_type uwb_bus_type; -extern struct device_attribute dev_attr_mac_address; -extern struct device_attribute dev_attr_beacon; -extern struct device_attribute dev_attr_scan; - -/* -- DRP Bandwidth allocator: bandwidth allocations, reservations, DRP */ -void uwb_rsv_init(struct uwb_rc *rc); -int uwb_rsv_setup(struct uwb_rc *rc); -void uwb_rsv_cleanup(struct uwb_rc *rc); -void uwb_rsv_remove_all(struct uwb_rc *rc); -void uwb_rsv_get(struct uwb_rsv *rsv); -void uwb_rsv_put(struct uwb_rsv *rsv); -bool uwb_rsv_has_two_drp_ies(struct uwb_rsv *rsv); -void uwb_rsv_dump(char *text, struct uwb_rsv *rsv); -int uwb_rsv_try_move(struct uwb_rsv *rsv, struct uwb_mas_bm *available); -void uwb_rsv_backoff_win_timer(struct timer_list *t); -void uwb_rsv_backoff_win_increment(struct uwb_rc *rc); -int uwb_rsv_status(struct uwb_rsv *rsv); -int uwb_rsv_companion_status(struct uwb_rsv *rsv); - -void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state); -void uwb_rsv_remove(struct uwb_rsv *rsv); -struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src, - struct uwb_ie_drp *drp_ie); -void uwb_rsv_sched_update(struct uwb_rc *rc); -void uwb_rsv_queue_update(struct uwb_rc *rc); - -int uwb_drp_ie_update(struct uwb_rsv *rsv); -void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie); - -void uwb_drp_avail_init(struct uwb_rc *rc); -void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail); -int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas); -void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas); -void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas); -void uwb_drp_avail_ie_update(struct uwb_rc *rc); - -/* -- PAL support */ -void uwb_rc_pal_init(struct uwb_rc *rc); - -/* -- Misc */ - -extern ssize_t uwb_mac_frame_hdr_print(char *, size_t, - const struct uwb_mac_frame_hdr *); - -/* -- Debug interface */ -void uwb_dbg_init(void); -void uwb_dbg_exit(void); -void uwb_dbg_add_rc(struct uwb_rc *rc); -void uwb_dbg_del_rc(struct uwb_rc *rc); -struct dentry *uwb_dbg_create_pal_dir(struct uwb_pal *pal); - -static inline void uwb_dev_lock(struct uwb_dev *uwb_dev) -{ - device_lock(&uwb_dev->dev); -} - -static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev) -{ - device_unlock(&uwb_dev->dev); -} - -#endif /* #ifndef __UWB_INTERNAL_H__ */ diff --git a/drivers/staging/uwb/uwb.h b/drivers/staging/uwb/uwb.h deleted file mode 100644 index 6a59706ba3a0..000000000000 --- a/drivers/staging/uwb/uwb.h +++ /dev/null @@ -1,817 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Ultra Wide Band - * UWB API - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: doc: overview of the API, different parts and pointers - */ - -#ifndef __LINUX__UWB_H__ -#define __LINUX__UWB_H__ - -#include <linux/limits.h> -#include <linux/device.h> -#include <linux/mutex.h> -#include <linux/timer.h> -#include <linux/wait.h> -#include <linux/workqueue.h> -#include <asm/page.h> -#include "include/spec.h" - -struct uwb_dev; -struct uwb_beca_e; -struct uwb_rc; -struct uwb_rsv; -struct uwb_dbg; - -/** - * struct uwb_dev - a UWB Device - * @rc: UWB Radio Controller that discovered the device (kind of its - * parent). - * @bce: a beacon cache entry for this device; or NULL if the device - * is a local radio controller. - * @mac_addr: the EUI-48 address of this device. - * @dev_addr: the current DevAddr used by this device. - * @beacon_slot: the slot number the beacon is using. - * @streams: bitmap of streams allocated to reservations targeted at - * this device. For an RC, this is the streams allocated for - * reservations targeted at DevAddrs. - * - * A UWB device may either by a neighbor or part of a local radio - * controller. - */ -struct uwb_dev { - struct mutex mutex; - struct list_head list_node; - struct device dev; - struct uwb_rc *rc; /* radio controller */ - struct uwb_beca_e *bce; /* Beacon Cache Entry */ - - struct uwb_mac_addr mac_addr; - struct uwb_dev_addr dev_addr; - int beacon_slot; - DECLARE_BITMAP(streams, UWB_NUM_STREAMS); - DECLARE_BITMAP(last_availability_bm, UWB_NUM_MAS); -}; -#define to_uwb_dev(d) container_of(d, struct uwb_dev, dev) - -/** - * UWB HWA/WHCI Radio Control {Command|Event} Block context IDs - * - * RC[CE]Bs have a 'context ID' field that matches the command with - * the event received to confirm it. - * - * Maximum number of context IDs - */ -enum { UWB_RC_CTX_MAX = 256 }; - - -/** Notification chain head for UWB generated events to listeners */ -struct uwb_notifs_chain { - struct list_head list; - struct mutex mutex; -}; - -/* Beacon cache list */ -struct uwb_beca { - struct list_head list; - size_t entries; - struct mutex mutex; -}; - -/* Event handling thread. */ -struct uwbd { - int pid; - struct task_struct *task; - wait_queue_head_t wq; - struct list_head event_list; - spinlock_t event_list_lock; -}; - -/** - * struct uwb_mas_bm - a bitmap of all MAS in a superframe - * @bm: a bitmap of length #UWB_NUM_MAS - */ -struct uwb_mas_bm { - DECLARE_BITMAP(bm, UWB_NUM_MAS); - DECLARE_BITMAP(unsafe_bm, UWB_NUM_MAS); - int safe; - int unsafe; -}; - -/** - * uwb_rsv_state - UWB Reservation state. - * - * NONE - reservation is not active (no DRP IE being transmitted). - * - * Owner reservation states: - * - * INITIATED - owner has sent an initial DRP request. - * PENDING - target responded with pending Reason Code. - * MODIFIED - reservation manager is modifying an established - * reservation with a different MAS allocation. - * ESTABLISHED - the reservation has been successfully negotiated. - * - * Target reservation states: - * - * DENIED - request is denied. - * ACCEPTED - request is accepted. - * PENDING - PAL has yet to make a decision to whether to accept or - * deny. - * - * FIXME: further target states TBD. - */ -enum uwb_rsv_state { - UWB_RSV_STATE_NONE = 0, - UWB_RSV_STATE_O_INITIATED, - UWB_RSV_STATE_O_PENDING, - UWB_RSV_STATE_O_MODIFIED, - UWB_RSV_STATE_O_ESTABLISHED, - UWB_RSV_STATE_O_TO_BE_MOVED, - UWB_RSV_STATE_O_MOVE_EXPANDING, - UWB_RSV_STATE_O_MOVE_COMBINING, - UWB_RSV_STATE_O_MOVE_REDUCING, - UWB_RSV_STATE_T_ACCEPTED, - UWB_RSV_STATE_T_DENIED, - UWB_RSV_STATE_T_CONFLICT, - UWB_RSV_STATE_T_PENDING, - UWB_RSV_STATE_T_EXPANDING_ACCEPTED, - UWB_RSV_STATE_T_EXPANDING_CONFLICT, - UWB_RSV_STATE_T_EXPANDING_PENDING, - UWB_RSV_STATE_T_EXPANDING_DENIED, - UWB_RSV_STATE_T_RESIZED, - - UWB_RSV_STATE_LAST, -}; - -enum uwb_rsv_target_type { - UWB_RSV_TARGET_DEV, - UWB_RSV_TARGET_DEVADDR, -}; - -/** - * struct uwb_rsv_target - the target of a reservation. - * - * Reservations unicast and targeted at a single device - * (UWB_RSV_TARGET_DEV); or (e.g., in the case of WUSB) targeted at a - * specific (private) DevAddr (UWB_RSV_TARGET_DEVADDR). - */ -struct uwb_rsv_target { - enum uwb_rsv_target_type type; - union { - struct uwb_dev *dev; - struct uwb_dev_addr devaddr; - }; -}; - -struct uwb_rsv_move { - struct uwb_mas_bm final_mas; - struct uwb_ie_drp *companion_drp_ie; - struct uwb_mas_bm companion_mas; -}; - -/* - * Number of streams reserved for reservations targeted at DevAddrs. - */ -#define UWB_NUM_GLOBAL_STREAMS 1 - -typedef void (*uwb_rsv_cb_f)(struct uwb_rsv *rsv); - -/** - * struct uwb_rsv - a DRP reservation - * - * Data structure management: - * - * @rc: the radio controller this reservation is for - * (as target or owner) - * @rc_node: a list node for the RC - * @pal_node: a list node for the PAL - * - * Owner and target parameters: - * - * @owner: the UWB device owning this reservation - * @target: the target UWB device - * @type: reservation type - * - * Owner parameters: - * - * @max_mas: maxiumum number of MAS - * @min_mas: minimum number of MAS - * @sparsity: owner selected sparsity - * @is_multicast: true iff multicast - * - * @callback: callback function when the reservation completes - * @pal_priv: private data for the PAL making the reservation - * - * Reservation status: - * - * @status: negotiation status - * @stream: stream index allocated for this reservation - * @tiebreaker: conflict tiebreaker for this reservation - * @mas: reserved MAS - * @drp_ie: the DRP IE - * @ie_valid: true iff the DRP IE matches the reservation parameters - * - * DRP reservations are uniquely identified by the owner, target and - * stream index. However, when using a DevAddr as a target (e.g., for - * a WUSB cluster reservation) the responses may be received from - * devices with different DevAddrs. In this case, reservations are - * uniquely identified by just the stream index. A number of stream - * indexes (UWB_NUM_GLOBAL_STREAMS) are reserved for this. - */ -struct uwb_rsv { - struct uwb_rc *rc; - struct list_head rc_node; - struct list_head pal_node; - struct kref kref; - - struct uwb_dev *owner; - struct uwb_rsv_target target; - enum uwb_drp_type type; - int max_mas; - int min_mas; - int max_interval; - bool is_multicast; - - uwb_rsv_cb_f callback; - void *pal_priv; - - enum uwb_rsv_state state; - bool needs_release_companion_mas; - u8 stream; - u8 tiebreaker; - struct uwb_mas_bm mas; - struct uwb_ie_drp *drp_ie; - struct uwb_rsv_move mv; - bool ie_valid; - struct timer_list timer; - struct work_struct handle_timeout_work; -}; - -static const -struct uwb_mas_bm uwb_mas_bm_zero = { .bm = { 0 } }; - -static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas) -{ - bitmap_copy_le(dst, mas->bm, UWB_NUM_MAS); -} - -/** - * struct uwb_drp_avail - a radio controller's view of MAS usage - * @global: MAS unused by neighbors (excluding reservations targeted - * or owned by the local radio controller) or the beaon period - * @local: MAS unused by local established reservations - * @pending: MAS unused by local pending reservations - * @ie: DRP Availability IE to be included in the beacon - * @ie_valid: true iff @ie is valid and does not need to regenerated from - * @global and @local - * - * Each radio controller maintains a view of MAS usage or - * availability. MAS available for a new reservation are determined - * from the intersection of @global, @local, and @pending. - * - * The radio controller must transmit a DRP Availability IE that's the - * intersection of @global and @local. - * - * A set bit indicates the MAS is unused and available. - * - * rc->rsvs_mutex should be held before accessing this data structure. - * - * [ECMA-368] section 17.4.3. - */ -struct uwb_drp_avail { - DECLARE_BITMAP(global, UWB_NUM_MAS); - DECLARE_BITMAP(local, UWB_NUM_MAS); - DECLARE_BITMAP(pending, UWB_NUM_MAS); - struct uwb_ie_drp_avail ie; - bool ie_valid; -}; - -struct uwb_drp_backoff_win { - u8 window; - u8 n; - int total_expired; - struct timer_list timer; - bool can_reserve_extra_mases; -}; - -const char *uwb_rsv_state_str(enum uwb_rsv_state state); -const char *uwb_rsv_type_str(enum uwb_drp_type type); - -struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb, - void *pal_priv); -void uwb_rsv_destroy(struct uwb_rsv *rsv); - -int uwb_rsv_establish(struct uwb_rsv *rsv); -int uwb_rsv_modify(struct uwb_rsv *rsv, - int max_mas, int min_mas, int sparsity); -void uwb_rsv_terminate(struct uwb_rsv *rsv); - -void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv); - -void uwb_rsv_get_usable_mas(struct uwb_rsv *orig_rsv, struct uwb_mas_bm *mas); - -/** - * Radio Control Interface instance - * - * - * Life cycle rules: those of the UWB Device. - * - * @index: an index number for this radio controller, as used in the - * device name. - * @version: version of protocol supported by this device - * @priv: Backend implementation; rw with uwb_dev.dev.sem taken. - * @cmd: Backend implementation to execute commands; rw and call - * only with uwb_dev.dev.sem taken. - * @reset: Hardware reset of radio controller and any PAL controllers. - * @filter: Backend implementation to manipulate data to and from device - * to be compliant to specification assumed by driver (WHCI - * 0.95). - * - * uwb_dev.dev.mutex is used to execute commands and update - * the corresponding structures; can't use a spinlock - * because rc->cmd() can sleep. - * @ies: This is a dynamically allocated array cacheing the - * IEs (settable by the host) that the beacon of this - * radio controller is currently sending. - * - * In reality, we store here the full command we set to - * the radio controller (which is basically a command - * prefix followed by all the IEs the beacon currently - * contains). This way we don't have to realloc and - * memcpy when setting it. - * - * We set this up in uwb_rc_ie_setup(), where we alloc - * this struct, call get_ie() [so we know which IEs are - * currently being sent, if any]. - * - * @ies_capacity:Amount of space (in bytes) allocated in @ies. The - * amount used is given by sizeof(*ies) plus ies->wIELength - * (which is a little endian quantity all the time). - * @ies_mutex: protect the IE cache - * @dbg: information for the debug interface - */ -struct uwb_rc { - struct uwb_dev uwb_dev; - int index; - u16 version; - - struct module *owner; - void *priv; - int (*start)(struct uwb_rc *rc); - void (*stop)(struct uwb_rc *rc); - int (*cmd)(struct uwb_rc *, const struct uwb_rccb *, size_t); - int (*reset)(struct uwb_rc *rc); - int (*filter_cmd)(struct uwb_rc *, struct uwb_rccb **, size_t *); - int (*filter_event)(struct uwb_rc *, struct uwb_rceb **, const size_t, - size_t *, size_t *); - - spinlock_t neh_lock; /* protects neh_* and ctx_* */ - struct list_head neh_list; /* Open NE handles */ - unsigned long ctx_bm[UWB_RC_CTX_MAX / 8 / sizeof(unsigned long)]; - u8 ctx_roll; - - int beaconing; /* Beaconing state [channel number] */ - int beaconing_forced; - int scanning; - enum uwb_scan_type scan_type:3; - unsigned ready:1; - struct uwb_notifs_chain notifs_chain; - struct uwb_beca uwb_beca; - - struct uwbd uwbd; - - struct uwb_drp_backoff_win bow; - struct uwb_drp_avail drp_avail; - struct list_head reservations; - struct list_head cnflt_alien_list; - struct uwb_mas_bm cnflt_alien_bitmap; - struct mutex rsvs_mutex; - spinlock_t rsvs_lock; - struct workqueue_struct *rsv_workq; - - struct delayed_work rsv_update_work; - struct delayed_work rsv_alien_bp_work; - int set_drp_ie_pending; - struct mutex ies_mutex; - struct uwb_rc_cmd_set_ie *ies; - size_t ies_capacity; - - struct list_head pals; - int active_pals; - - struct uwb_dbg *dbg; -}; - - -/** - * struct uwb_pal - a UWB PAL - * @name: descriptive name for this PAL (wusbhc, wlp, etc.). - * @device: a device for the PAL. Used to link the PAL and the radio - * controller in sysfs. - * @rc: the radio controller the PAL uses. - * @channel_changed: called when the channel used by the radio changes. - * A channel of -1 means the channel has been stopped. - * @new_rsv: called when a peer requests a reservation (may be NULL if - * the PAL cannot accept reservation requests). - * @channel: channel being used by the PAL; 0 if the PAL isn't using - * the radio; -1 if the PAL wishes to use the radio but - * cannot. - * @debugfs_dir: a debugfs directory which the PAL can use for its own - * debugfs files. - * - * A Protocol Adaptation Layer (PAL) is a user of the WiMedia UWB - * radio platform (e.g., WUSB, WLP or Bluetooth UWB AMP). - * - * The PALs using a radio controller must register themselves to - * permit the UWB stack to coordinate usage of the radio between the - * various PALs or to allow PALs to response to certain requests from - * peers. - * - * A struct uwb_pal should be embedded in a containing structure - * belonging to the PAL and initialized with uwb_pal_init()). Fields - * should be set appropriately by the PAL before registering the PAL - * with uwb_pal_register(). - */ -struct uwb_pal { - struct list_head node; - const char *name; - struct device *device; - struct uwb_rc *rc; - - void (*channel_changed)(struct uwb_pal *pal, int channel); - void (*new_rsv)(struct uwb_pal *pal, struct uwb_rsv *rsv); - - int channel; - struct dentry *debugfs_dir; -}; - -void uwb_pal_init(struct uwb_pal *pal); -int uwb_pal_register(struct uwb_pal *pal); -void uwb_pal_unregister(struct uwb_pal *pal); - -int uwb_radio_start(struct uwb_pal *pal); -void uwb_radio_stop(struct uwb_pal *pal); - -/* - * General public API - * - * This API can be used by UWB device drivers or by those implementing - * UWB Radio Controllers - */ -struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc, - const struct uwb_dev_addr *devaddr); -struct uwb_dev *uwb_dev_get_by_rc(struct uwb_dev *, struct uwb_rc *); -static inline void uwb_dev_get(struct uwb_dev *uwb_dev) -{ - get_device(&uwb_dev->dev); -} -static inline void uwb_dev_put(struct uwb_dev *uwb_dev) -{ - put_device(&uwb_dev->dev); -} -struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev); - -/** - * Callback function for 'uwb_{dev,rc}_foreach()'. - * - * @dev: Linux device instance - * 'uwb_dev = container_of(dev, struct uwb_dev, dev)' - * @priv: Data passed by the caller to 'uwb_{dev,rc}_foreach()'. - * - * @returns: 0 to continue the iterations, any other val to stop - * iterating and return the value to the caller of - * _foreach(). - */ -typedef int (*uwb_dev_for_each_f)(struct device *dev, void *priv); -int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f func, void *priv); - -struct uwb_rc *uwb_rc_alloc(void); -struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *); -struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *); -void uwb_rc_put(struct uwb_rc *rc); - -typedef void (*uwb_rc_cmd_cb_f)(struct uwb_rc *rc, void *arg, - struct uwb_rceb *reply, ssize_t reply_size); - -int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name, - struct uwb_rccb *cmd, size_t cmd_size, - u8 expected_type, u16 expected_event, - uwb_rc_cmd_cb_f cb, void *arg); -ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name, - struct uwb_rccb *cmd, size_t cmd_size, - struct uwb_rceb *reply, size_t reply_size); -ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name, - struct uwb_rccb *cmd, size_t cmd_size, - u8 expected_type, u16 expected_event, - struct uwb_rceb **preply); - -size_t __uwb_addr_print(char *, size_t, const unsigned char *, int); - -int uwb_rc_dev_addr_set(struct uwb_rc *, const struct uwb_dev_addr *); -int uwb_rc_dev_addr_get(struct uwb_rc *, struct uwb_dev_addr *); -int uwb_rc_mac_addr_set(struct uwb_rc *, const struct uwb_mac_addr *); -int uwb_rc_mac_addr_get(struct uwb_rc *, struct uwb_mac_addr *); -int __uwb_mac_addr_assigned_check(struct device *, void *); -int __uwb_dev_addr_assigned_check(struct device *, void *); - -/* Print in @buf a pretty repr of @addr */ -static inline size_t uwb_dev_addr_print(char *buf, size_t buf_size, - const struct uwb_dev_addr *addr) -{ - return __uwb_addr_print(buf, buf_size, addr->data, 0); -} - -/* Print in @buf a pretty repr of @addr */ -static inline size_t uwb_mac_addr_print(char *buf, size_t buf_size, - const struct uwb_mac_addr *addr) -{ - return __uwb_addr_print(buf, buf_size, addr->data, 1); -} - -/* @returns 0 if device addresses @addr2 and @addr1 are equal */ -static inline int uwb_dev_addr_cmp(const struct uwb_dev_addr *addr1, - const struct uwb_dev_addr *addr2) -{ - return memcmp(addr1, addr2, sizeof(*addr1)); -} - -/* @returns 0 if MAC addresses @addr2 and @addr1 are equal */ -static inline int uwb_mac_addr_cmp(const struct uwb_mac_addr *addr1, - const struct uwb_mac_addr *addr2) -{ - return memcmp(addr1, addr2, sizeof(*addr1)); -} - -/* @returns !0 if a MAC @addr is a broadcast address */ -static inline int uwb_mac_addr_bcast(const struct uwb_mac_addr *addr) -{ - struct uwb_mac_addr bcast = { - .data = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff } - }; - return !uwb_mac_addr_cmp(addr, &bcast); -} - -/* @returns !0 if a MAC @addr is all zeroes*/ -static inline int uwb_mac_addr_unset(const struct uwb_mac_addr *addr) -{ - struct uwb_mac_addr unset = { - .data = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } - }; - return !uwb_mac_addr_cmp(addr, &unset); -} - -/* @returns !0 if the address is in use. */ -static inline unsigned __uwb_dev_addr_assigned(struct uwb_rc *rc, - struct uwb_dev_addr *addr) -{ - return uwb_dev_for_each(rc, __uwb_dev_addr_assigned_check, addr); -} - -/* - * UWB Radio Controller API - * - * This API is used (in addition to the general API) to implement UWB - * Radio Controllers. - */ -void uwb_rc_init(struct uwb_rc *); -int uwb_rc_add(struct uwb_rc *, struct device *dev, void *rc_priv); -void uwb_rc_rm(struct uwb_rc *); -void uwb_rc_neh_grok(struct uwb_rc *, void *, size_t); -void uwb_rc_neh_error(struct uwb_rc *, int); -void uwb_rc_reset_all(struct uwb_rc *rc); -void uwb_rc_pre_reset(struct uwb_rc *rc); -int uwb_rc_post_reset(struct uwb_rc *rc); - -/** - * uwb_rsv_is_owner - is the owner of this reservation the RC? - * @rsv: the reservation - */ -static inline bool uwb_rsv_is_owner(struct uwb_rsv *rsv) -{ - return rsv->owner == &rsv->rc->uwb_dev; -} - -/** - * enum uwb_notifs - UWB events that can be passed to any listeners - * @UWB_NOTIF_ONAIR: a new neighbour has joined the beacon group. - * @UWB_NOTIF_OFFAIR: a neighbour has left the beacon group. - * - * Higher layers can register callback functions with the radio - * controller using uwb_notifs_register(). The radio controller - * maintains a list of all registered handlers and will notify all - * nodes when an event occurs. - */ -enum uwb_notifs { - UWB_NOTIF_ONAIR, - UWB_NOTIF_OFFAIR, -}; - -/* Callback function registered with UWB */ -struct uwb_notifs_handler { - struct list_head list_node; - void (*cb)(void *, struct uwb_dev *, enum uwb_notifs); - void *data; -}; - -int uwb_notifs_register(struct uwb_rc *, struct uwb_notifs_handler *); -int uwb_notifs_deregister(struct uwb_rc *, struct uwb_notifs_handler *); - - -/** - * UWB radio controller Event Size Entry (for creating entry tables) - * - * WUSB and WHCI define events and notifications, and they might have - * fixed or variable size. - * - * Each event/notification has a size which is not necessarily known - * in advance based on the event code. As well, vendor specific - * events/notifications will have a size impossible to determine - * unless we know about the device's specific details. - * - * It was way too smart of the spec writers not to think that it would - * be impossible for a generic driver to skip over vendor specific - * events/notifications if there are no LENGTH fields in the HEADER of - * each message...the transaction size cannot be counted on as the - * spec does not forbid to pack more than one event in a single - * transaction. - * - * Thus, we guess sizes with tables (or for events, when you know the - * size ahead of time you can use uwb_rc_neh_extra_size*()). We - * register tables with the known events and their sizes, and then we - * traverse those tables. For those with variable length, we provide a - * way to lookup the size inside the event/notification's - * payload. This allows device-specific event size tables to be - * registered. - * - * @size: Size of the payload - * - * @offset: if != 0, at offset @offset-1 starts a field with a length - * that has to be added to @size. The format of the field is - * given by @type. - * - * @type: Type and length of the offset field. Most common is LE 16 - * bits (that's why that is zero); others are there mostly to - * cover for bugs and weirdos. - */ -struct uwb_est_entry { - size_t size; - unsigned offset; - enum { UWB_EST_16 = 0, UWB_EST_8 = 1 } type; -}; - -int uwb_est_register(u8 type, u8 code_high, u16 vendor, u16 product, - const struct uwb_est_entry *, size_t entries); -int uwb_est_unregister(u8 type, u8 code_high, u16 vendor, u16 product, - const struct uwb_est_entry *, size_t entries); -ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb, - size_t len); - -/* -- Misc */ - -enum { - EDC_MAX_ERRORS = 10, - EDC_ERROR_TIMEFRAME = HZ, -}; - -/* error density counter */ -struct edc { - unsigned long timestart; - u16 errorcount; -}; - -static inline -void edc_init(struct edc *edc) -{ - edc->timestart = jiffies; -} - -/* Called when an error occurred. - * This is way to determine if the number of acceptable errors per time - * period has been exceeded. It is not accurate as there are cases in which - * this scheme will not work, for example if there are periodic occurrences - * of errors that straddle updates to the start time. This scheme is - * sufficient for our usage. - * - * @returns 1 if maximum acceptable errors per timeframe has been exceeded. - */ -static inline int edc_inc(struct edc *err_hist, u16 max_err, u16 timeframe) -{ - unsigned long now; - - now = jiffies; - if (now - err_hist->timestart > timeframe) { - err_hist->errorcount = 1; - err_hist->timestart = now; - } else if (++err_hist->errorcount > max_err) { - err_hist->errorcount = 0; - err_hist->timestart = now; - return 1; - } - return 0; -} - - -/* Information Element handling */ - -struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len); -int uwb_rc_ie_add(struct uwb_rc *uwb_rc, const struct uwb_ie_hdr *ies, size_t size); -int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id); - -/* - * Transmission statistics - * - * UWB uses LQI and RSSI (one byte values) for reporting radio signal - * strength and line quality indication. We do quick and dirty - * averages of those. They are signed values, btw. - * - * For 8 bit quantities, we keep the min, the max, an accumulator - * (@sigma) and a # of samples. When @samples gets to 255, we compute - * the average (@sigma / @samples), place it in @sigma and reset - * @samples to 1 (so we use it as the first sample). - * - * Now, statistically speaking, probably I am kicking the kidneys of - * some books I have in my shelves collecting dust, but I just want to - * get an approx, not the Nobel. - * - * LOCKING: there is no locking per se, but we try to keep a lockless - * schema. Only _add_samples() modifies the values--as long as you - * have other locking on top that makes sure that no two calls of - * _add_sample() happen at the same time, then we are fine. Now, for - * resetting the values we just set @samples to 0 and that makes the - * next _add_sample() to start with defaults. Reading the values in - * _show() currently can race, so you need to make sure the calls are - * under the same lock that protects calls to _add_sample(). FIXME: - * currently unlocked (It is not ultraprecise but does the trick. Bite - * me). - */ -struct stats { - s8 min, max; - s16 sigma; - atomic_t samples; -}; - -static inline -void stats_init(struct stats *stats) -{ - atomic_set(&stats->samples, 0); - wmb(); -} - -static inline -void stats_add_sample(struct stats *stats, s8 sample) -{ - s8 min, max; - s16 sigma; - unsigned samples = atomic_read(&stats->samples); - if (samples == 0) { /* it was zero before, so we initialize */ - min = 127; - max = -128; - sigma = 0; - } else { - min = stats->min; - max = stats->max; - sigma = stats->sigma; - } - - if (sample < min) /* compute new values */ - min = sample; - else if (sample > max) - max = sample; - sigma += sample; - - stats->min = min; /* commit */ - stats->max = max; - stats->sigma = sigma; - if (atomic_add_return(1, &stats->samples) > 255) { - /* wrapped around! reset */ - stats->sigma = sigma / 256; - atomic_set(&stats->samples, 1); - } -} - -static inline ssize_t stats_show(struct stats *stats, char *buf) -{ - int min, max, avg; - int samples = atomic_read(&stats->samples); - if (samples == 0) - min = max = avg = 0; - else { - min = stats->min; - max = stats->max; - avg = stats->sigma / samples; - } - return scnprintf(buf, PAGE_SIZE, "%d %d %d\n", min, max, avg); -} - -static inline ssize_t stats_store(struct stats *stats, const char *buf, - size_t size) -{ - stats_init(stats); - return size; -} - -#endif /* #ifndef __LINUX__UWB_H__ */ diff --git a/drivers/staging/uwb/uwbd.c b/drivers/staging/uwb/uwbd.c deleted file mode 100644 index dc5c743d4f5f..000000000000 --- a/drivers/staging/uwb/uwbd.c +++ /dev/null @@ -1,356 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Ultra Wide Band - * Neighborhood Management Daemon - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This daemon takes care of maintaing information that describes the - * UWB neighborhood that the radios in this machine can see. It also - * keeps a tab of which devices are visible, makes sure each HC sits - * on a different channel to avoid interfering, etc. - * - * Different drivers (radio controller, device, any API in general) - * communicate with this daemon through an event queue. Daemon wakes - * up, takes a list of events and handles them one by one; handling - * function is extracted from a table based on the event's type and - * subtype. Events are freed only if the handling function says so. - * - * . Lock protecting the event list has to be an spinlock and locked - * with IRQSAVE because it might be called from an interrupt - * context (ie: when events arrive and the notification drops - * down from the ISR). - * - * . UWB radio controller drivers queue events to the daemon using - * uwbd_event_queue(). They just get the event, chew it to make it - * look like UWBD likes it and pass it in a buffer allocated with - * uwb_event_alloc(). - * - * EVENTS - * - * Events have a type, a subtype, a length, some other stuff and the - * data blob, which depends on the event. The header is 'struct - * uwb_event'; for payloads, see 'struct uwbd_evt_*'. - * - * EVENT HANDLER TABLES - * - * To find a handling function for an event, the type is used to index - * a subtype-table in the type-table. The subtype-table is indexed - * with the subtype to get the function that handles the event. Start - * with the main type-table 'uwbd_evt_type_handler'. - * - * DEVICES - * - * Devices are created when a bunch of beacons have been received and - * it is stablished that the device has stable radio presence. CREATED - * only, not configured. Devices are ONLY configured when an - * Application-Specific IE Probe is receieved, in which the device - * declares which Protocol ID it groks. Then the device is CONFIGURED - * (and the driver->probe() stuff of the device model is invoked). - * - * Devices are considered disconnected when a certain number of - * beacons are not received in an amount of time. - * - * Handler functions are called normally uwbd_evt_handle_*(). - */ -#include <linux/kthread.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/freezer.h> - -#include "uwb-internal.h" - -/* - * UWBD Event handler function signature - * - * Return !0 if the event needs not to be freed (ie the handler - * takes/took care of it). 0 means the daemon code will free the - * event. - * - * @evt->rc is already referenced and guaranteed to exist. See - * uwb_evt_handle(). - */ -typedef int (*uwbd_evt_handler_f)(struct uwb_event *); - -/** - * Properties of a UWBD event - * - * @handler: the function that will handle this event - * @name: text name of event - */ -struct uwbd_event { - uwbd_evt_handler_f handler; - const char *name; -}; - -/* Table of handlers for and properties of the UWBD Radio Control Events */ -static struct uwbd_event uwbd_urc_events[] = { - [UWB_RC_EVT_IE_RCV] = { - .handler = uwbd_evt_handle_rc_ie_rcv, - .name = "IE_RECEIVED" - }, - [UWB_RC_EVT_BEACON] = { - .handler = uwbd_evt_handle_rc_beacon, - .name = "BEACON_RECEIVED" - }, - [UWB_RC_EVT_BEACON_SIZE] = { - .handler = uwbd_evt_handle_rc_beacon_size, - .name = "BEACON_SIZE_CHANGE" - }, - [UWB_RC_EVT_BPOIE_CHANGE] = { - .handler = uwbd_evt_handle_rc_bpoie_change, - .name = "BPOIE_CHANGE" - }, - [UWB_RC_EVT_BP_SLOT_CHANGE] = { - .handler = uwbd_evt_handle_rc_bp_slot_change, - .name = "BP_SLOT_CHANGE" - }, - [UWB_RC_EVT_DRP_AVAIL] = { - .handler = uwbd_evt_handle_rc_drp_avail, - .name = "DRP_AVAILABILITY_CHANGE" - }, - [UWB_RC_EVT_DRP] = { - .handler = uwbd_evt_handle_rc_drp, - .name = "DRP" - }, - [UWB_RC_EVT_DEV_ADDR_CONFLICT] = { - .handler = uwbd_evt_handle_rc_dev_addr_conflict, - .name = "DEV_ADDR_CONFLICT", - }, -}; - - - -struct uwbd_evt_type_handler { - const char *name; - struct uwbd_event *uwbd_events; - size_t size; -}; - -/* Table of handlers for each UWBD Event type. */ -static struct uwbd_evt_type_handler uwbd_urc_evt_type_handlers[] = { - [UWB_RC_CET_GENERAL] = { - .name = "URC", - .uwbd_events = uwbd_urc_events, - .size = ARRAY_SIZE(uwbd_urc_events), - }, -}; - -static const struct uwbd_event uwbd_message_handlers[] = { - [UWB_EVT_MSG_RESET] = { - .handler = uwbd_msg_handle_reset, - .name = "reset", - }, -}; - -/* - * Handle an URC event passed to the UWB Daemon - * - * @evt: the event to handle - * @returns: 0 if the event can be kfreed, !0 on the contrary - * (somebody else took ownership) [coincidentally, returning - * a <0 errno code will free it :)]. - * - * Looks up the two indirection tables (one for the type, one for the - * subtype) to decide which function handles it and then calls the - * handler. - * - * The event structure passed to the event handler has the radio - * controller in @evt->rc referenced. The reference will be dropped - * once the handler returns, so if it needs it for longer (async), - * it'll need to take another one. - */ -static -int uwbd_event_handle_urc(struct uwb_event *evt) -{ - int result = -EINVAL; - struct uwbd_evt_type_handler *type_table; - uwbd_evt_handler_f handler; - u8 type, context; - u16 event; - - type = evt->notif.rceb->bEventType; - event = le16_to_cpu(evt->notif.rceb->wEvent); - context = evt->notif.rceb->bEventContext; - - if (type >= ARRAY_SIZE(uwbd_urc_evt_type_handlers)) - goto out; - type_table = &uwbd_urc_evt_type_handlers[type]; - if (type_table->uwbd_events == NULL) - goto out; - if (event >= type_table->size) - goto out; - handler = type_table->uwbd_events[event].handler; - if (handler == NULL) - goto out; - - result = (*handler)(evt); -out: - if (result < 0) - dev_err(&evt->rc->uwb_dev.dev, - "UWBD: event 0x%02x/%04x/%02x, handling failed: %d\n", - type, event, context, result); - return result; -} - -static void uwbd_event_handle_message(struct uwb_event *evt) -{ - struct uwb_rc *rc; - int result; - - rc = evt->rc; - - if (evt->message < 0 || evt->message >= ARRAY_SIZE(uwbd_message_handlers)) { - dev_err(&rc->uwb_dev.dev, "UWBD: invalid message type %d\n", evt->message); - return; - } - - result = uwbd_message_handlers[evt->message].handler(evt); - if (result < 0) - dev_err(&rc->uwb_dev.dev, "UWBD: '%s' message failed: %d\n", - uwbd_message_handlers[evt->message].name, result); -} - -static void uwbd_event_handle(struct uwb_event *evt) -{ - struct uwb_rc *rc; - int should_keep; - - rc = evt->rc; - - if (rc->ready) { - switch (evt->type) { - case UWB_EVT_TYPE_NOTIF: - should_keep = uwbd_event_handle_urc(evt); - if (should_keep <= 0) - kfree(evt->notif.rceb); - break; - case UWB_EVT_TYPE_MSG: - uwbd_event_handle_message(evt); - break; - default: - dev_err(&rc->uwb_dev.dev, "UWBD: invalid event type %d\n", evt->type); - break; - } - } - - __uwb_rc_put(rc); /* for the __uwb_rc_get() in uwb_rc_notif_cb() */ -} - -/** - * UWB Daemon - * - * Listens to all UWB notifications and takes care to track the state - * of the UWB neighbourhood for the kernel. When we do a run, we - * spinlock, move the list to a private copy and release the - * lock. Hold it as little as possible. Not a conflict: it is - * guaranteed we own the events in the private list. - * - * FIXME: should change so we don't have a 1HZ timer all the time, but - * only if there are devices. - */ -static int uwbd(void *param) -{ - struct uwb_rc *rc = param; - unsigned long flags; - struct uwb_event *evt; - int should_stop = 0; - - while (1) { - wait_event_interruptible_timeout( - rc->uwbd.wq, - !list_empty(&rc->uwbd.event_list) - || (should_stop = kthread_should_stop()), - HZ); - if (should_stop) - break; - - spin_lock_irqsave(&rc->uwbd.event_list_lock, flags); - if (!list_empty(&rc->uwbd.event_list)) { - evt = list_first_entry(&rc->uwbd.event_list, struct uwb_event, list_node); - list_del(&evt->list_node); - } else - evt = NULL; - spin_unlock_irqrestore(&rc->uwbd.event_list_lock, flags); - - if (evt) { - uwbd_event_handle(evt); - kfree(evt); - } - - uwb_beca_purge(rc); /* Purge devices that left */ - } - return 0; -} - - -/** Start the UWB daemon */ -void uwbd_start(struct uwb_rc *rc) -{ - struct task_struct *task = kthread_run(uwbd, rc, "uwbd"); - if (IS_ERR(task)) { - rc->uwbd.task = NULL; - printk(KERN_ERR "UWB: Cannot start management daemon; " - "UWB won't work\n"); - } else { - rc->uwbd.task = task; - rc->uwbd.pid = rc->uwbd.task->pid; - } -} - -/* Stop the UWB daemon and free any unprocessed events */ -void uwbd_stop(struct uwb_rc *rc) -{ - if (rc->uwbd.task) - kthread_stop(rc->uwbd.task); - uwbd_flush(rc); -} - -/* - * Queue an event for the management daemon - * - * When some lower layer receives an event, it uses this function to - * push it forward to the UWB daemon. - * - * Once you pass the event, you don't own it any more, but the daemon - * does. It will uwb_event_free() it when done, so make sure you - * uwb_event_alloc()ed it or bad things will happen. - * - * If the daemon is not running, we just free the event. - */ -void uwbd_event_queue(struct uwb_event *evt) -{ - struct uwb_rc *rc = evt->rc; - unsigned long flags; - - spin_lock_irqsave(&rc->uwbd.event_list_lock, flags); - if (rc->uwbd.pid != 0) { - list_add(&evt->list_node, &rc->uwbd.event_list); - wake_up_all(&rc->uwbd.wq); - } else { - __uwb_rc_put(evt->rc); - if (evt->type == UWB_EVT_TYPE_NOTIF) - kfree(evt->notif.rceb); - kfree(evt); - } - spin_unlock_irqrestore(&rc->uwbd.event_list_lock, flags); - return; -} - -void uwbd_flush(struct uwb_rc *rc) -{ - struct uwb_event *evt, *nxt; - - spin_lock_irq(&rc->uwbd.event_list_lock); - list_for_each_entry_safe(evt, nxt, &rc->uwbd.event_list, list_node) { - if (evt->rc == rc) { - __uwb_rc_put(rc); - list_del(&evt->list_node); - if (evt->type == UWB_EVT_TYPE_NOTIF) - kfree(evt->notif.rceb); - kfree(evt); - } - } - spin_unlock_irq(&rc->uwbd.event_list_lock); -} diff --git a/drivers/staging/uwb/whc-rc.c b/drivers/staging/uwb/whc-rc.c deleted file mode 100644 index a5ab255d7d36..000000000000 --- a/drivers/staging/uwb/whc-rc.c +++ /dev/null @@ -1,467 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3]) - * Radio Control command/event transport to the UWB stack - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Initialize and hook up the Radio Control interface. - * - * For each device probed, creates an 'struct whcrc' which contains - * just the representation of the UWB Radio Controller, and the logic - * for reading notifications and passing them to the UWB Core. - * - * So we initialize all of those, register the UWB Radio Controller - * and setup the notification/event handle to pipe the notifications - * to the UWB management Daemon. - * - * Once uwb_rc_add() is called, the UWB stack takes control, resets - * the radio and readies the device to take commands the UWB - * API/user-space. - * - * Note this driver is just a transport driver; the commands are - * formed at the UWB stack and given to this driver who will deliver - * them to the hw and transfer the replies/notifications back to the - * UWB stack through the UWB daemon (UWBD). - */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/dma-mapping.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/workqueue.h> -#include "uwb.h" -#include "include/whci.h" -#include "include/umc.h" - -#include "uwb-internal.h" - -/** - * Descriptor for an instance of the UWB Radio Control Driver that - * attaches to the URC interface of the WHCI PCI card. - * - * Unless there is a lock specific to the 'data members', all access - * is protected by uwb_rc->mutex. - */ -struct whcrc { - struct umc_dev *umc_dev; - struct uwb_rc *uwb_rc; /* UWB host controller */ - - unsigned long area; - void __iomem *rc_base; - size_t rc_len; - spinlock_t irq_lock; - - void *evt_buf, *cmd_buf; - dma_addr_t evt_dma_buf, cmd_dma_buf; - wait_queue_head_t cmd_wq; - struct work_struct event_work; -}; - -/** - * Execute an UWB RC command on WHCI/RC - * - * @rc: Instance of a Radio Controller that is a whcrc - * @cmd: Buffer containing the RCCB and payload to execute - * @cmd_size: Size of the command buffer. - * - * We copy the command into whcrc->cmd_buf (as it is pretty and - * aligned`and physically contiguous) and then press the right keys in - * the controller's URCCMD register to get it to read it. We might - * have to wait for the cmd_sem to be open to us. - * - * NOTE: rc's mutex has to be locked - */ -static int whcrc_cmd(struct uwb_rc *uwb_rc, - const struct uwb_rccb *cmd, size_t cmd_size) -{ - int result = 0; - struct whcrc *whcrc = uwb_rc->priv; - struct device *dev = &whcrc->umc_dev->dev; - u32 urccmd; - - if (cmd_size >= 4096) - return -EINVAL; - - /* - * If the URC is halted, then the hardware has reset itself. - * Attempt to recover by restarting the device and then return - * an error as it's likely that the current command isn't - * valid for a newly started RC. - */ - if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) { - dev_err(dev, "requesting reset of halted radio controller\n"); - uwb_rc_reset_all(uwb_rc); - return -EIO; - } - - result = wait_event_timeout(whcrc->cmd_wq, - !(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2); - if (result == 0) { - dev_err(dev, "device is not ready to execute commands\n"); - return -ETIMEDOUT; - } - - memmove(whcrc->cmd_buf, cmd, cmd_size); - le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR); - - spin_lock(&whcrc->irq_lock); - urccmd = le_readl(whcrc->rc_base + URCCMD); - urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK); - le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size, - whcrc->rc_base + URCCMD); - spin_unlock(&whcrc->irq_lock); - - return 0; -} - -static int whcrc_reset(struct uwb_rc *rc) -{ - struct whcrc *whcrc = rc->priv; - - return umc_controller_reset(whcrc->umc_dev); -} - -/** - * Reset event reception mechanism and tell hw we are ready to get more - * - * We have read all the events in the event buffer, so we are ready to - * reset it to the beginning. - * - * This is only called during initialization or after an event buffer - * has been retired. This means we can be sure that event processing - * is disabled and it's safe to update the URCEVTADDR register. - * - * There's no need to wait for the event processing to start as the - * URC will not clear URCCMD_ACTIVE until (internal) event buffer - * space is available. - */ -static -void whcrc_enable_events(struct whcrc *whcrc) -{ - u32 urccmd; - - le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR); - - spin_lock(&whcrc->irq_lock); - urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE; - le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD); - spin_unlock(&whcrc->irq_lock); -} - -static void whcrc_event_work(struct work_struct *work) -{ - struct whcrc *whcrc = container_of(work, struct whcrc, event_work); - size_t size; - u64 urcevtaddr; - - urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR); - size = urcevtaddr & URCEVTADDR_OFFSET_MASK; - - uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size); - whcrc_enable_events(whcrc); -} - -/** - * Catch interrupts? - * - * We ack inmediately (and expect the hw to do the right thing and - * raise another IRQ if things have changed :) - */ -static -irqreturn_t whcrc_irq_cb(int irq, void *_whcrc) -{ - struct whcrc *whcrc = _whcrc; - struct device *dev = &whcrc->umc_dev->dev; - u32 urcsts; - - urcsts = le_readl(whcrc->rc_base + URCSTS); - if (!(urcsts & URCSTS_INT_MASK)) - return IRQ_NONE; - le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS); - - if (urcsts & URCSTS_HSE) { - dev_err(dev, "host system error -- hardware halted\n"); - /* FIXME: do something sensible here */ - goto out; - } - if (urcsts & URCSTS_ER) - schedule_work(&whcrc->event_work); - if (urcsts & URCSTS_RCI) - wake_up_all(&whcrc->cmd_wq); -out: - return IRQ_HANDLED; -} - - -/** - * Initialize a UMC RC interface: map regions, get (shared) IRQ - */ -static -int whcrc_setup_rc_umc(struct whcrc *whcrc) -{ - int result = 0; - struct device *dev = &whcrc->umc_dev->dev; - struct umc_dev *umc_dev = whcrc->umc_dev; - - whcrc->area = umc_dev->resource.start; - whcrc->rc_len = resource_size(&umc_dev->resource); - result = -EBUSY; - if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME) == NULL) { - dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n", - whcrc->rc_len, whcrc->area, result); - goto error_request_region; - } - - whcrc->rc_base = ioremap(whcrc->area, whcrc->rc_len); - if (whcrc->rc_base == NULL) { - dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n", - whcrc->rc_len, whcrc->area, result); - goto error_ioremap; - } - - result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED, - KBUILD_MODNAME, whcrc); - if (result < 0) { - dev_err(dev, "can't allocate IRQ %d: %d\n", - umc_dev->irq, result); - goto error_request_irq; - } - - result = -ENOMEM; - whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, - &whcrc->cmd_dma_buf, GFP_KERNEL); - if (whcrc->cmd_buf == NULL) { - dev_err(dev, "Can't allocate cmd transfer buffer\n"); - goto error_cmd_buffer; - } - - whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, - &whcrc->evt_dma_buf, GFP_KERNEL); - if (whcrc->evt_buf == NULL) { - dev_err(dev, "Can't allocate evt transfer buffer\n"); - goto error_evt_buffer; - } - return 0; - -error_evt_buffer: - dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, - whcrc->cmd_dma_buf); -error_cmd_buffer: - free_irq(umc_dev->irq, whcrc); -error_request_irq: - iounmap(whcrc->rc_base); -error_ioremap: - release_mem_region(whcrc->area, whcrc->rc_len); -error_request_region: - return result; -} - - -/** - * Release RC's UMC resources - */ -static -void whcrc_release_rc_umc(struct whcrc *whcrc) -{ - struct umc_dev *umc_dev = whcrc->umc_dev; - - dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf, - whcrc->evt_dma_buf); - dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, - whcrc->cmd_dma_buf); - free_irq(umc_dev->irq, whcrc); - iounmap(whcrc->rc_base); - release_mem_region(whcrc->area, whcrc->rc_len); -} - - -/** - * whcrc_start_rc - start a WHCI radio controller - * @whcrc: the radio controller to start - * - * Reset the UMC device, start the radio controller, enable events and - * finally enable interrupts. - */ -static int whcrc_start_rc(struct uwb_rc *rc) -{ - struct whcrc *whcrc = rc->priv; - struct device *dev = &whcrc->umc_dev->dev; - - /* Reset the thing */ - le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD); - if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0, - 5000, "hardware reset") < 0) - return -EBUSY; - - /* Set the event buffer, start the controller (enable IRQs later) */ - le_writel(0, whcrc->rc_base + URCINTR); - le_writel(URCCMD_RS, whcrc->rc_base + URCCMD); - if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0, - 5000, "radio controller start") < 0) - return -ETIMEDOUT; - whcrc_enable_events(whcrc); - le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR); - return 0; -} - - -/** - * whcrc_stop_rc - stop a WHCI radio controller - * @whcrc: the radio controller to stop - * - * Disable interrupts and cancel any pending event processing work - * before clearing the Run/Stop bit. - */ -static -void whcrc_stop_rc(struct uwb_rc *rc) -{ - struct whcrc *whcrc = rc->priv; - struct umc_dev *umc_dev = whcrc->umc_dev; - - le_writel(0, whcrc->rc_base + URCINTR); - cancel_work_sync(&whcrc->event_work); - - le_writel(0, whcrc->rc_base + URCCMD); - whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS, - URCSTS_HALTED, URCSTS_HALTED, 100, "radio controller stop"); -} - -static void whcrc_init(struct whcrc *whcrc) -{ - spin_lock_init(&whcrc->irq_lock); - init_waitqueue_head(&whcrc->cmd_wq); - INIT_WORK(&whcrc->event_work, whcrc_event_work); -} - -/** - * Initialize the radio controller. - * - * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the - * IRQ handler we use that to determine if the hw is ready to - * handle events. Looks like a race condition, but it really is - * not. - */ -static -int whcrc_probe(struct umc_dev *umc_dev) -{ - int result; - struct uwb_rc *uwb_rc; - struct whcrc *whcrc; - struct device *dev = &umc_dev->dev; - - result = -ENOMEM; - uwb_rc = uwb_rc_alloc(); - if (uwb_rc == NULL) { - dev_err(dev, "unable to allocate RC instance\n"); - goto error_rc_alloc; - } - whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL); - if (whcrc == NULL) { - dev_err(dev, "unable to allocate WHC-RC instance\n"); - goto error_alloc; - } - whcrc_init(whcrc); - whcrc->umc_dev = umc_dev; - - result = whcrc_setup_rc_umc(whcrc); - if (result < 0) { - dev_err(dev, "Can't setup RC UMC interface: %d\n", result); - goto error_setup_rc_umc; - } - whcrc->uwb_rc = uwb_rc; - - uwb_rc->owner = THIS_MODULE; - uwb_rc->cmd = whcrc_cmd; - uwb_rc->reset = whcrc_reset; - uwb_rc->start = whcrc_start_rc; - uwb_rc->stop = whcrc_stop_rc; - - result = uwb_rc_add(uwb_rc, dev, whcrc); - if (result < 0) - goto error_rc_add; - umc_set_drvdata(umc_dev, whcrc); - return 0; - -error_rc_add: - whcrc_release_rc_umc(whcrc); -error_setup_rc_umc: - kfree(whcrc); -error_alloc: - uwb_rc_put(uwb_rc); -error_rc_alloc: - return result; -} - -/** - * Clean up the radio control resources - * - * When we up the command semaphore, everybody possibly held trying to - * execute a command should be granted entry and then they'll see the - * host is quiescing and up it (so it will chain to the next waiter). - * This should not happen (in any case), as we can only remove when - * there are no handles open... - */ -static void whcrc_remove(struct umc_dev *umc_dev) -{ - struct whcrc *whcrc = umc_get_drvdata(umc_dev); - struct uwb_rc *uwb_rc = whcrc->uwb_rc; - - umc_set_drvdata(umc_dev, NULL); - uwb_rc_rm(uwb_rc); - whcrc_release_rc_umc(whcrc); - kfree(whcrc); - uwb_rc_put(uwb_rc); -} - -static int whcrc_pre_reset(struct umc_dev *umc) -{ - struct whcrc *whcrc = umc_get_drvdata(umc); - struct uwb_rc *uwb_rc = whcrc->uwb_rc; - - uwb_rc_pre_reset(uwb_rc); - return 0; -} - -static int whcrc_post_reset(struct umc_dev *umc) -{ - struct whcrc *whcrc = umc_get_drvdata(umc); - struct uwb_rc *uwb_rc = whcrc->uwb_rc; - - return uwb_rc_post_reset(uwb_rc); -} - -/* PCI device ID's that we handle [so it gets loaded] */ -static struct pci_device_id __used whcrc_id_table[] = { - { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, - { /* empty last entry */ } -}; -MODULE_DEVICE_TABLE(pci, whcrc_id_table); - -static struct umc_driver whcrc_driver = { - .name = "whc-rc", - .cap_id = UMC_CAP_ID_WHCI_RC, - .probe = whcrc_probe, - .remove = whcrc_remove, - .pre_reset = whcrc_pre_reset, - .post_reset = whcrc_post_reset, -}; - -static int __init whcrc_driver_init(void) -{ - return umc_driver_register(&whcrc_driver); -} -module_init(whcrc_driver_init); - -static void __exit whcrc_driver_exit(void) -{ - umc_driver_unregister(&whcrc_driver); -} -module_exit(whcrc_driver_exit); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/uwb/whci.c b/drivers/staging/uwb/whci.c deleted file mode 100644 index a8832f64d708..000000000000 --- a/drivers/staging/uwb/whci.c +++ /dev/null @@ -1,257 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * WHCI UWB Multi-interface Controller enumerator. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/slab.h> -#include "include/whci.h" -#include "include/umc.h" - -struct whci_card { - struct pci_dev *pci; - void __iomem *uwbbase; - u8 n_caps; - struct umc_dev *devs[0]; -}; - - -/* Fix faulty HW :( */ -static -u64 whci_capdata_quirks(struct whci_card *card, u64 capdata) -{ - u64 capdata_orig = capdata; - struct pci_dev *pci_dev = card->pci; - if (pci_dev->vendor == PCI_VENDOR_ID_INTEL - && (pci_dev->device == 0x0c3b || pci_dev->device == 0004) - && pci_dev->class == 0x0d1010) { - switch (UWBCAPDATA_TO_CAP_ID(capdata)) { - /* WLP capability has 0x100 bytes of aperture */ - case 0x80: - capdata |= 0x40 << 8; break; - /* WUSB capability has 0x80 bytes of aperture - * and ID is 1 */ - case 0x02: - capdata &= ~0xffff; - capdata |= 0x2001; - break; - } - } - if (capdata_orig != capdata) - dev_warn(&pci_dev->dev, - "PCI v%04x d%04x c%06x#%02x: " - "corrected capdata from %016Lx to %016Lx\n", - pci_dev->vendor, pci_dev->device, pci_dev->class, - (unsigned)UWBCAPDATA_TO_CAP_ID(capdata), - (unsigned long long)capdata_orig, - (unsigned long long)capdata); - return capdata; -} - - -/** - * whci_wait_for - wait for a WHCI register to be set - * - * Polls (for at most @max_ms ms) until '*@reg & @mask == @result'. - */ -int whci_wait_for(struct device *dev, u32 __iomem *reg, u32 mask, u32 result, - unsigned long max_ms, const char *tag) -{ - unsigned t = 0; - u32 val; - for (;;) { - val = le_readl(reg); - if ((val & mask) == result) - break; - if (t >= max_ms) { - dev_err(dev, "%s timed out\n", tag); - return -ETIMEDOUT; - } - msleep(10); - t += 10; - } - return 0; -} -EXPORT_SYMBOL_GPL(whci_wait_for); - - -/* - * NOTE: the capinfo and capdata registers are slightly different - * (size and cap-id fields). So for cap #0, we need to fill - * in. Size comes from the size of the register block - * (statically calculated); cap_id comes from nowhere, we use - * zero, that is reserved, for the radio controller, because - * none was defined at the spec level. - */ -static int whci_add_cap(struct whci_card *card, int n) -{ - struct umc_dev *umc; - u64 capdata; - int bar, err; - - umc = umc_device_create(&card->pci->dev, n); - if (umc == NULL) - return -ENOMEM; - - capdata = le_readq(card->uwbbase + UWBCAPDATA(n)); - - bar = UWBCAPDATA_TO_BAR(capdata) << 1; - - capdata = whci_capdata_quirks(card, capdata); - /* Capability 0 is the radio controller. It's size is 32 - * bytes (WHCI0.95[2.3, T2-9]). */ - umc->version = UWBCAPDATA_TO_VERSION(capdata); - umc->cap_id = n == 0 ? 0 : UWBCAPDATA_TO_CAP_ID(capdata); - umc->bar = bar; - umc->resource.start = pci_resource_start(card->pci, bar) - + UWBCAPDATA_TO_OFFSET(capdata); - umc->resource.end = umc->resource.start - + (n == 0 ? 0x20 : UWBCAPDATA_TO_SIZE(capdata)) - 1; - umc->resource.name = dev_name(&umc->dev); - umc->resource.flags = card->pci->resource[bar].flags; - umc->resource.parent = &card->pci->resource[bar]; - umc->irq = card->pci->irq; - - err = umc_device_register(umc); - if (err < 0) - goto error; - card->devs[n] = umc; - return 0; - -error: - kfree(umc); - return err; -} - -static void whci_del_cap(struct whci_card *card, int n) -{ - struct umc_dev *umc = card->devs[n]; - - umc_device_unregister(umc); -} - -static int whci_n_caps(struct pci_dev *pci) -{ - void __iomem *uwbbase; - u64 capinfo; - - uwbbase = pci_iomap(pci, 0, 8); - if (!uwbbase) - return -ENOMEM; - capinfo = le_readq(uwbbase + UWBCAPINFO); - pci_iounmap(pci, uwbbase); - - return UWBCAPINFO_TO_N_CAPS(capinfo); -} - -static int whci_probe(struct pci_dev *pci, const struct pci_device_id *id) -{ - struct whci_card *card; - int err, n_caps, n; - - err = pci_enable_device(pci); - if (err < 0) - goto error; - pci_enable_msi(pci); - pci_set_master(pci); - err = -ENXIO; - if (!pci_set_dma_mask(pci, DMA_BIT_MASK(64))) - pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64)); - else if (!pci_set_dma_mask(pci, DMA_BIT_MASK(32))) - pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32)); - else - goto error_dma; - - err = n_caps = whci_n_caps(pci); - if (n_caps < 0) - goto error_ncaps; - - err = -ENOMEM; - card = kzalloc(sizeof(struct whci_card) - + sizeof(struct umc_dev *) * (n_caps + 1), - GFP_KERNEL); - if (card == NULL) - goto error_kzalloc; - card->pci = pci; - card->n_caps = n_caps; - - err = -EBUSY; - if (!request_mem_region(pci_resource_start(pci, 0), - UWBCAPDATA_SIZE(card->n_caps), - "whci (capability data)")) - goto error_request_memregion; - err = -ENOMEM; - card->uwbbase = pci_iomap(pci, 0, UWBCAPDATA_SIZE(card->n_caps)); - if (!card->uwbbase) - goto error_iomap; - - /* Add each capability. */ - for (n = 0; n <= card->n_caps; n++) { - err = whci_add_cap(card, n); - if (err < 0 && n == 0) { - dev_err(&pci->dev, "cannot bind UWB radio controller:" - " %d\n", err); - goto error_bind; - } - if (err < 0) - dev_warn(&pci->dev, "warning: cannot bind capability " - "#%u: %d\n", n, err); - } - pci_set_drvdata(pci, card); - return 0; - -error_bind: - pci_iounmap(pci, card->uwbbase); -error_iomap: - release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps)); -error_request_memregion: - kfree(card); -error_kzalloc: -error_ncaps: -error_dma: - pci_disable_msi(pci); - pci_disable_device(pci); -error: - return err; -} - -static void whci_remove(struct pci_dev *pci) -{ - struct whci_card *card = pci_get_drvdata(pci); - int n; - - pci_set_drvdata(pci, NULL); - /* Unregister each capability in reverse (so the master device - * is unregistered last). */ - for (n = card->n_caps; n >= 0 ; n--) - whci_del_cap(card, n); - pci_iounmap(pci, card->uwbbase); - release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps)); - kfree(card); - pci_disable_msi(pci); - pci_disable_device(pci); -} - -static struct pci_device_id whci_id_table[] = { - { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, - { 0 }, -}; -MODULE_DEVICE_TABLE(pci, whci_id_table); - - -static struct pci_driver whci_driver = { - .name = "whci", - .id_table = whci_id_table, - .probe = whci_probe, - .remove = whci_remove, -}; - -module_pci_driver(whci_driver); -MODULE_DESCRIPTION("WHCI UWB Multi-interface Controller enumerator"); -MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/wusbcore/Documentation/wusb-cbaf b/drivers/staging/wusbcore/Documentation/wusb-cbaf deleted file mode 100644 index 8b3d43efce90..000000000000 --- a/drivers/staging/wusbcore/Documentation/wusb-cbaf +++ /dev/null @@ -1,130 +0,0 @@ -#! /bin/bash -# - -set -e - -progname=$(basename $0) -function help -{ - cat <<EOF -Usage: $progname COMMAND DEVICEs [ARGS] - -Command for manipulating the pairing/authentication credentials of a -Wireless USB device that supports wired-mode Cable-Based-Association. - -Works in conjunction with the wusb-cba.ko driver from http://linuxuwb.org. - - -DEVICE - - sysfs path to the device to authenticate; for example, both this - guys are the same: - - /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.1 - /sys/bus/usb/drivers/wusb-cbaf/1-4.4:1.1 - -COMMAND/ARGS are - - start - - Start a WUSB host controller (by setting up a CHID) - - set-chid DEVICE HOST-CHID HOST-BANDGROUP HOST-NAME - - Sets host information in the device; after this you can call the - get-cdid to see how does this device report itself to us. - - get-cdid DEVICE - - Get the device ID associated to the HOST-CHID we sent with - 'set-chid'. We might not know about it. - - set-cc DEVICE - - If we allow the device to connect, set a random new CDID and CK - (connection key). Device saves them for the next time it wants to - connect wireless. We save them for that next time also so we can - authenticate the device (when we see the CDID he uses to id - itself) and the CK to crypto talk to it. - -CHID is always 16 hex bytes in 'XX YY ZZ...' form -BANDGROUP is almost always 0001 - -Examples: - - You can default most arguments to '' to get a sane value: - - $ $progname set-chid '' '' '' "My host name" - - A full sequence: - - $ $progname set-chid '' '' '' "My host name" - $ $progname get-cdid '' - $ $progname set-cc '' - -EOF -} - - -# Defaults -# FIXME: CHID should come from a database :), band group from the host -host_CHID="00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff" -host_band_group="0001" -host_name=$(hostname) - -devs="$(echo /sys/bus/usb/drivers/wusb-cbaf/[0-9]*)" -hdevs="$(for h in /sys/class/uwb_rc/*/wusbhc; do readlink -f $h; done)" - -result=0 -case $1 in - start) - for dev in ${2:-$hdevs} - do - echo $host_CHID > $dev/wusb_chid - echo I: started host $(basename $dev) >&2 - done - ;; - stop) - for dev in ${2:-$hdevs} - do - echo 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > $dev/wusb_chid - echo I: stopped host $(basename $dev) >&2 - done - ;; - set-chid) - shift - for dev in ${2:-$devs}; do - echo "${4:-$host_name}" > $dev/wusb_host_name - echo "${3:-$host_band_group}" > $dev/wusb_host_band_groups - echo ${2:-$host_CHID} > $dev/wusb_chid - done - ;; - get-cdid) - for dev in ${2:-$devs} - do - cat $dev/wusb_cdid - done - ;; - set-cc) - for dev in ${2:-$devs}; do - shift - CDID="$(head --bytes=16 /dev/urandom | od -tx1 -An)" - CK="$(head --bytes=16 /dev/urandom | od -tx1 -An)" - echo "$CDID" > $dev/wusb_cdid - echo "$CK" > $dev/wusb_ck - - echo I: CC set >&2 - echo "CHID: $(cat $dev/wusb_chid)" - echo "CDID:$CDID" - echo "CK: $CK" - done - ;; - help|h|--help|-h) - help - ;; - *) - echo "E: Unknown usage" 1>&2 - help 1>&2 - result=1 -esac -exit $result diff --git a/drivers/staging/wusbcore/Documentation/wusb-design-overview.rst b/drivers/staging/wusbcore/Documentation/wusb-design-overview.rst deleted file mode 100644 index dc5e21609bb5..000000000000 --- a/drivers/staging/wusbcore/Documentation/wusb-design-overview.rst +++ /dev/null @@ -1,457 +0,0 @@ -================================ -Linux UWB + Wireless USB + WiNET -================================ - - Copyright (C) 2005-2006 Intel Corporation - - Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License version - 2 as published by the Free Software Foundation. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - 02110-1301, USA. - - -Please visit http://bughost.org/thewiki/Design-overview.txt-1.8 for -updated content. - - * Design-overview.txt-1.8 - -This code implements a Ultra Wide Band stack for Linux, as well as -drivers for the USB based UWB radio controllers defined in the -Wireless USB 1.0 specification (including Wireless USB host controller -and an Intel WiNET controller). - -.. Contents - 1. Introduction - 1. HWA: Host Wire adapters, your Wireless USB dongle - - 2. DWA: Device Wired Adaptor, a Wireless USB hub for wired - devices - 3. WHCI: Wireless Host Controller Interface, the PCI WUSB host - adapter - 2. The UWB stack - 1. Devices and hosts: the basic structure - - 2. Host Controller life cycle - - 3. On the air: beacons and enumerating the radio neighborhood - - 4. Device lists - 5. Bandwidth allocation - - 3. Wireless USB Host Controller drivers - - 4. Glossary - - -Introduction -============ - -UWB is a wide-band communication protocol that is to serve also as the -low-level protocol for others (much like TCP sits on IP). Currently -these others are Wireless USB and TCP/IP, but seems Bluetooth and -Firewire/1394 are coming along. - -UWB uses a band from roughly 3 to 10 GHz, transmitting at a max of -~-41dB (or 0.074 uW/MHz--geography specific data is still being -negotiated w/ regulators, so watch for changes). That band is divided in -a bunch of ~1.5 GHz wide channels (or band groups) composed of three -subbands/subchannels (528 MHz each). Each channel is independent of each -other, so you could consider them different "busses". Initially this -driver considers them all a single one. - -Radio time is divided in 65536 us long /superframes/, each one divided -in 256 256us long /MASs/ (Media Allocation Slots), which are the basic -time/media allocation units for transferring data. At the beginning of -each superframe there is a Beacon Period (BP), where every device -transmit its beacon on a single MAS. The length of the BP depends on how -many devices are present and the length of their beacons. - -Devices have a MAC (fixed, 48 bit address) and a device (changeable, 16 -bit address) and send periodic beacons to advertise themselves and pass -info on what they are and do. They advertise their capabilities and a -bunch of other stuff. - -The different logical parts of this driver are: - - * - - *UWB*: the Ultra-Wide-Band stack -- manages the radio and - associated spectrum to allow for devices sharing it. Allows to - control bandwidth assignment, beaconing, scanning, etc - - * - - *WUSB*: the layer that sits on top of UWB to provide Wireless USB. - The Wireless USB spec defines means to control a UWB radio and to - do the actual WUSB. - - -HWA: Host Wire adapters, your Wireless USB dongle -------------------------------------------------- - -WUSB also defines a device called a Host Wire Adaptor (HWA), which in -mere terms is a USB dongle that enables your PC to have UWB and Wireless -USB. The Wireless USB Host Controller in a HWA looks to the host like a -[Wireless] USB controller connected via USB (!) - -The HWA itself is broken in two or three main interfaces: - - * - - *RC*: Radio control -- this implements an interface to the - Ultra-Wide-Band radio controller. The driver for this implements a - USB-based UWB Radio Controller to the UWB stack. - - * - - *HC*: the wireless USB host controller. It looks like a USB host - whose root port is the radio and the WUSB devices connect to it. - To the system it looks like a separate USB host. The driver (will) - implement a USB host controller (similar to UHCI, OHCI or EHCI) - for which the root hub is the radio...To reiterate: it is a USB - controller that is connected via USB instead of PCI. - - * - - *WINET*: some HW provide a WiNET interface (IP over UWB). This - package provides a driver for it (it looks like a network - interface, winetX). The driver detects when there is a link up for - their type and kick into gear. - - -DWA: Device Wired Adaptor, a Wireless USB hub for wired devices ---------------------------------------------------------------- - -These are the complement to HWAs. They are a USB host for connecting -wired devices, but it is connected to your PC connected via Wireless -USB. To the system it looks like yet another USB host. To the untrained -eye, it looks like a hub that connects upstream wirelessly. - -We still offer no support for this; however, it should share a lot of -code with the HWA-RC driver; there is a bunch of factorization work that -has been done to support that in upcoming releases. - - -WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter -------------------------------------------------------------------- - -This is your usual PCI device that implements WHCI. Similar in concept -to EHCI, it allows your wireless USB devices (including DWAs) to connect -to your host via a PCI interface. As in the case of the HWA, it has a -Radio Control interface and the WUSB Host Controller interface per se. - -There is still no driver support for this, but will be in upcoming -releases. - - -The UWB stack -============= - -The main mission of the UWB stack is to keep a tally of which devices -are in radio proximity to allow drivers to connect to them. As well, it -provides an API for controlling the local radio controllers (RCs from -now on), such as to start/stop beaconing, scan, allocate bandwidth, etc. - - -Devices and hosts: the basic structure --------------------------------------- - -The main building block here is the UWB device (struct uwb_dev). For -each device that pops up in radio presence (ie: the UWB host receives a -beacon from it) you get a struct uwb_dev that will show up in -/sys/bus/uwb/devices. - -For each RC that is detected, a new struct uwb_rc and struct uwb_dev are -created. An entry is also created in /sys/class/uwb_rc for each RC. - -Each RC driver is implemented by a separate driver that plugs into the -interface that the UWB stack provides through a struct uwb_rc_ops. The -spec creators have been nice enough to make the message format the same -for HWA and WHCI RCs, so the driver is really a very thin transport that -moves the requests from the UWB API to the device [/uwb_rc_ops->cmd()/] -and sends the replies and notifications back to the API -[/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that -is chartered, among other things, to keep the tab of how the UWB radio -neighborhood looks, creating and destroying devices as they show up or -disappear. - -Command execution is very simple: a command block is sent and a event -block or reply is expected back. For sending/receiving command/events, a -handle called /neh/ (Notification/Event Handle) is opened with -/uwb_rc_neh_open()/. - -The HWA-RC (USB dongle) driver (drivers/uwb/hwa-rc.c) does this job for -the USB connected HWA. Eventually, drivers/whci-rc.c will do the same -for the PCI connected WHCI controller. - - -Host Controller life cycle --------------------------- - -So let's say we connect a dongle to the system: it is detected and -firmware uploaded if needed [for Intel's i1480 -/drivers/uwb/ptc/usb.c:ptc_usb_probe()/] and then it is reenumerated. -Now we have a real HWA device connected and -/drivers/uwb/hwa-rc.c:hwarc_probe()/ picks it up, that will set up the -Wire-Adaptor environment and then suck it into the UWB stack's vision of -the world [/drivers/uwb/lc-rc.c:uwb_rc_add()/]. - - * - - [*] The stack should put a new RC to scan for devices - [/uwb_rc_scan()/] so it finds what's available around and tries to - connect to them, but this is policy stuff and should be driven - from user space. As of now, the operator is expected to do it - manually; see the release notes for documentation on the procedure. - -When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/ -takes time of tearing everything down safely (or not...). - - -On the air: beacons and enumerating the radio neighborhood ----------------------------------------------------------- - -So assuming we have devices and we have agreed for a channel to connect -on (let's say 9), we put the new RC to beacon: - - * - - $ echo 9 0 > /sys/class/uwb_rc/uwb0/beacon - -Now it is visible. If there were other devices in the same radio channel -and beacon group (that's what the zero is for), the dongle's radio -control interface will send beacon notifications on its -notification/event endpoint (NEEP). The beacon notifications are part of -the event stream that is funneled into the API with -/drivers/uwb/neh.c:uwb_rc_neh_grok()/ and delivered to the UWBD, the UWB -daemon through a notification list. - -UWBD wakes up and scans the event list; finds a beacon and adds it to -the BEACON CACHE (/uwb_beca/). If he receives a number of beacons from -the same device, he considers it to be 'onair' and creates a new device -[/drivers/uwb/lc-dev.c:uwbd_dev_onair()/]. Similarly, when no beacons -are received in some time, the device is considered gone and wiped out -[uwbd calls periodically /uwb/beacon.c:uwb_beca_purge()/ that will purge -the beacon cache of dead devices]. - - -Device lists ------------- - -All UWB devices are kept in the list of the struct bus_type uwb_bus_type. - - -Bandwidth allocation --------------------- - -The UWB stack maintains a local copy of DRP availability through -processing of incoming *DRP Availability Change* notifications. This -local copy is currently used to present the current bandwidth -availability to the user through the sysfs file -/sys/class/uwb_rc/uwbx/bw_avail. In the future the bandwidth -availability information will be used by the bandwidth reservation -routines. - -The bandwidth reservation routines are in progress and are thus not -present in the current release. When completed they will enable a user -to initiate DRP reservation requests through interaction with sysfs. DRP -reservation requests from remote UWB devices will also be handled. The -bandwidth management done by the UWB stack will include callbacks to the -higher layers will enable the higher layers to use the reservations upon -completion. [Note: The bandwidth reservation work is in progress and -subject to change.] - - -Wireless USB Host Controller drivers -==================================== - -*WARNING* This section needs a lot of work! - -As explained above, there are three different types of HCs in the WUSB -world: HWA-HC, DWA-HC and WHCI-HC. - -HWA-HC and DWA-HC share that they are Wire-Adapters (USB or WUSB -connected controllers), and their transfer management system is almost -identical. So is their notification delivery system. - -HWA-HC and WHCI-HC share that they are both WUSB host controllers, so -they have to deal with WUSB device life cycle and maintenance, wireless -root-hub - -HWA exposes a Host Controller interface (HWA-HC 0xe0/02/02). This has -three endpoints (Notifications, Data Transfer In and Data Transfer -Out--known as NEP, DTI and DTO in the code). - -We reserve UWB bandwidth for our Wireless USB Cluster, create a Cluster -ID and tell the HC to use all that. Then we start it. This means the HC -starts sending MMCs. - - * - - The MMCs are blocks of data defined somewhere in the WUSB1.0 spec - that define a stream in the UWB channel time allocated for sending - WUSB IEs (host to device commands/notifications) and Device - Notifications (device initiated to host). Each host defines a - unique Wireless USB cluster through MMCs. Devices can connect to a - single cluster at the time. The IEs are Information Elements, and - among them are the bandwidth allocations that tell each device - when can they transmit or receive. - -Now it all depends on external stimuli. - -New device connection ---------------------- - -A new device pops up, it scans the radio looking for MMCs that give out -the existence of Wireless USB channels. Once one (or more) are found, -selects which one to connect to. Sends a /DN_Connect/ (device -notification connect) during the DNTS (Device Notification Time -Slot--announced in the MMCs - -HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery -into /devconnect/). This process starts the authentication process for -the device. First we allocate a /fake port/ and assign an -unauthenticated address (128 to 255--what we really do is -0x80 | fake_port_idx). We fiddle with the fake port status and /hub_wq/ -sees a new connection, so he moves on to enable the fake port with a reset. - -So now we are in the reset path -- we know we have a non-yet enumerated -device with an unauthorized address; we ask user space to authenticate -(FIXME: not yet done, similar to bluetooth pairing), then we do the key -exchange (FIXME: not yet done) and issue a /set address 0/ to bring the -device to the default state. Device is authenticated. - -From here, the USB stack takes control through the usb_hcd ops. hub_wq -has seen the port status changes, as we have been toggling them. It will -start enumerating and doing transfers through usb_hcd->urb_enqueue() to -read descriptors and move our data. - -Device life cycle and keep alives ---------------------------------- - -Every time there is a successful transfer to/from a device, we update a -per-device activity timestamp. If not, every now and then we check and -if the activity timestamp gets old, we ping the device by sending it a -Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this -arrives to us as a notification through -devconnect.c:wusb_handle_dn_alive(). If a device times out, we -disconnect it from the system (cleaning up internal information and -toggling the bits in the fake hub port, which kicks hub_wq into removing -the rest of the stuff). - -This is done through devconnect:__wusb_check_devs(), which will scan the -device list looking for whom needs refreshing. - -If the device wants to disconnect, it will either die (ugly) or send a -/DN_Disconnect/ that will prompt a disconnection from the system. - -Sending and receiving data --------------------------- - -Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is -/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and -DWAs. - -Each HC has a number of rpipes and buffers that can be assigned to them; -when doing a data transfer (xfer), first the rpipe has to be aimed and -prepared (buffers assigned), then we can start queueing requests for -data in or out. - -Data buffers have to be segmented out before sending--so we send first a -header (segment request) and then if there is any data, a data buffer -immediately after to the DTI interface (yep, even the request). If our -buffer is bigger than the max segment size, then we just do multiple -requests. - -[This sucks, because doing USB scatter gatter in Linux is resource -intensive, if any...not that the current approach is not. It just has to -be cleaned up a lot :)]. - -If reading, we don't send data buffers, just the segment headers saying -we want to read segments. - -When the xfer is executed, we receive a notification that says data is -ready in the DTI endpoint (handled through -xfer.c:wa_handle_notif_xfer()). In there we read from the DTI endpoint a -descriptor that gives us the status of the transfer, its identification -(given when we issued it) and the segment number. If it was a data read, -we issue another URB to read into the destination buffer the chunk of -data coming out of the remote endpoint. Done, wait for the next guy. The -callbacks for the URBs issued from here are the ones that will declare -the xfer complete at some point and call its callback. - -Seems simple, but the implementation is not trivial. - - * - - *WARNING* Old!! - -The main xfer descriptor, wa_xfer (equivalent to a URB) contains an -array of segments, tallys on segments and buffers and callback -information. Buried in there is a lot of URBs for executing the segments -and buffer transfers. - -For OUT xfers, there is an array of segments, one URB for each, another -one of buffer URB. When submitting, we submit URBs for segment request -1, buffer 1, segment 2, buffer 2...etc. Then we wait on the DTI for xfer -result data; when all the segments are complete, we call the callback to -finalize the transfer. - -For IN xfers, we only issue URBs for the segments we want to read and -then wait for the xfer result data. - -URB mapping into xfers -^^^^^^^^^^^^^^^^^^^^^^ - -This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an -rpipe to the endpoint where we have to transmit, create a transfer -context (wa_xfer) and submit it. When the xfer is done, our callback is -called and we assign the status bits and release the xfer resources. - -In dequeue() we are basically cancelling/aborting the transfer. We issue -a xfer abort request to the HC, cancel all the URBs we had submitted -and not yet done and when all that is done, the xfer callback will be -called--this will call the URB callback. - - -Glossary -======== - -*DWA* -- Device Wire Adapter - -USB host, wired for downstream devices, upstream connects wirelessly -with Wireless USB. - -*EVENT* -- Response to a command on the NEEP - -*HWA* -- Host Wire Adapter / USB dongle for UWB and Wireless USB - -*NEH* -- Notification/Event Handle - -Handle/file descriptor for receiving notifications or events. The WA -code requires you to get one of this to listen for notifications or -events on the NEEP. - -*NEEP* -- Notification/Event EndPoint - -Stuff related to the management of the first endpoint of a HWA USB -dongle that is used to deliver an stream of events and notifications to -the host. - -*NOTIFICATION* -- Message coming in the NEEP as response to something. - -*RC* -- Radio Control - -Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by -InakyPerezGonzalez) diff --git a/drivers/staging/wusbcore/Kconfig b/drivers/staging/wusbcore/Kconfig deleted file mode 100644 index a559d023b508..000000000000 --- a/drivers/staging/wusbcore/Kconfig +++ /dev/null @@ -1,39 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Wireless USB Core configuration -# -config USB_WUSB - tristate "Enable Wireless USB extensions" - depends on UWB && USB - select CRYPTO - select CRYPTO_AES - select CRYPTO_CCM - help - Enable the host-side support for Wireless USB. - - To compile this support select Y (built in). It is safe to - select even if you don't have the hardware. - -config USB_WUSB_CBAF - tristate "Support WUSB Cable Based Association (CBA)" - depends on USB - help - Some WUSB devices support Cable Based Association. It's used to - enable the secure communication between the host and the - device. - - Enable this option if your WUSB device must to be connected - via wired USB before establishing a wireless link. - - It is safe to select even if you don't have a compatible - hardware. - -config USB_WUSB_CBAF_DEBUG - bool "Enable CBA debug messages" - depends on USB_WUSB_CBAF - help - Say Y here if you want the CBA to produce a bunch of debug messages - to the system log. Select this if you are having a problem with - CBA support and want to see more of what is going on. - -source "drivers/staging/wusbcore/host/Kconfig" diff --git a/drivers/staging/wusbcore/Makefile b/drivers/staging/wusbcore/Makefile deleted file mode 100644 index b47b874268ac..000000000000 --- a/drivers/staging/wusbcore/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -ccflags-$(CONFIG_USB_WUSB_CBAF_DEBUG) := -DDEBUG - -obj-$(CONFIG_USB_WUSB) += wusbcore.o -obj-$(CONFIG_USB_HWA_HCD) += wusb-wa.o -obj-$(CONFIG_USB_WUSB_CBAF) += wusb-cbaf.o - - -wusbcore-y := \ - crypto.o \ - devconnect.o \ - dev-sysfs.o \ - mmc.o \ - pal.o \ - rh.o \ - reservation.o \ - security.o \ - wusbhc.o - -wusb-cbaf-y := cbaf.o - -wusb-wa-y := \ - wa-hc.o \ - wa-nep.o \ - wa-rpipe.o \ - wa-xfer.o - -obj-y += host/ diff --git a/drivers/staging/wusbcore/TODO b/drivers/staging/wusbcore/TODO deleted file mode 100644 index abae57000534..000000000000 --- a/drivers/staging/wusbcore/TODO +++ /dev/null @@ -1,8 +0,0 @@ -TODO: Remove in late 2019 unless there are users - -There seems to not be any real wireless USB devices anywhere in the wild -anymore. It turned out to be a failed technology :( - -This will be removed from the tree if no one objects. - -Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff --git a/drivers/staging/wusbcore/cbaf.c b/drivers/staging/wusbcore/cbaf.c deleted file mode 100644 index 57062eaf7558..000000000000 --- a/drivers/staging/wusbcore/cbaf.c +++ /dev/null @@ -1,645 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB - Cable Based Association - * - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - * - * WUSB devices have to be paired (associated in WUSB lingo) so - * that they can connect to the system. - * - * One way of pairing is using CBA-Cable Based Association. First - * time you plug the device with a cable, association is done between - * host and device and subsequent times, you can connect wirelessly - * without having to associate again. That's the idea. - * - * This driver does nothing Earth shattering. It just provides an - * interface to chat with the wire-connected device so we can get a - * CDID (device ID) that might have been previously associated to a - * CHID (host ID) and to set up a new <CHID,CDID,CK> triplet - * (connection context), with the CK being the secret, or connection - * key. This is the pairing data. - * - * When a device with the CBA capability connects, the probe routine - * just creates a bunch of sysfs files that a user space enumeration - * manager uses to allow it to connect wirelessly to the system or not. - * - * The process goes like this: - * - * 1. Device plugs, cbaf is loaded, notifications happen. - * - * 2. The connection manager (CM) sees a device with CBAF capability - * (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE). - * - * 3. The CM writes the host name, supported band groups, and the CHID - * (host ID) into the wusb_host_name, wusb_host_band_groups and - * wusb_chid files. These get sent to the device and the CDID (if - * any) for this host is requested. - * - * 4. The CM can verify that the device's supported band groups - * (wusb_device_band_groups) are compatible with the host. - * - * 5. The CM reads the wusb_cdid file. - * - * 6. The CM looks up its database - * - * 6.1 If it has a matching CHID,CDID entry, the device has been - * authorized before (paired) and nothing further needs to be - * done. - * - * 6.2 If the CDID is zero (or the CM doesn't find a matching CDID in - * its database), the device is assumed to be not known. The CM - * may associate the host with device by: writing a randomly - * generated CDID to wusb_cdid and then a random CK to wusb_ck - * (this uploads the new CC to the device). - * - * CMD may choose to prompt the user before associating with a new - * device. - * - * 7. Device is unplugged. - * - * When the device tries to connect wirelessly, it will present its - * CDID to the WUSB host controller. The CM will query the - * database. If the CHID/CDID pair found, it will (with a 4-way - * handshake) challenge the device to demonstrate it has the CK secret - * key (from our database) without actually exchanging it. Once - * satisfied, crypto keys are derived from the CK, the device is - * connected and all communication is encrypted. - * - * References: - * [WUSB-AM] Association Models Supplement to the Certified Wireless - * Universal Serial Bus Specification, version 1.0. - */ -#include <linux/module.h> -#include <linux/ctype.h> -#include <linux/usb.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/random.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include "../uwb/uwb.h" -#include "include/wusb.h" -#include "include/association.h" - -#define CBA_NAME_LEN 0x40 /* [WUSB-AM] table 4-7 */ - -/* An instance of a Cable-Based-Association-Framework device */ -struct cbaf { - struct usb_device *usb_dev; - struct usb_interface *usb_iface; - void *buffer; - size_t buffer_size; - - struct wusb_ckhdid chid; - char host_name[CBA_NAME_LEN]; - u16 host_band_groups; - - struct wusb_ckhdid cdid; - char device_name[CBA_NAME_LEN]; - u16 device_band_groups; - - struct wusb_ckhdid ck; -}; - -/* - * Verify that a CBAF USB-interface has what we need - * - * According to [WUSB-AM], CBA devices should provide at least two - * interfaces: - * - RETRIEVE_HOST_INFO - * - ASSOCIATE - * - * If the device doesn't provide these interfaces, we do not know how - * to deal with it. - */ -static int cbaf_check(struct cbaf *cbaf) -{ - int result; - struct device *dev = &cbaf->usb_iface->dev; - struct wusb_cbaf_assoc_info *assoc_info; - struct wusb_cbaf_assoc_request *assoc_request; - size_t assoc_size; - void *itr, *top; - int ar_rhi = 0, ar_assoc = 0; - - result = usb_control_msg( - cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0), - CBAF_REQ_GET_ASSOCIATION_INFORMATION, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, - cbaf->buffer, cbaf->buffer_size, USB_CTRL_GET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Cannot get available association types: %d\n", - result); - return result; - } - - assoc_info = cbaf->buffer; - if (result < sizeof(*assoc_info)) { - dev_err(dev, "Not enough data to decode association info " - "header (%zu vs %zu bytes required)\n", - (size_t)result, sizeof(*assoc_info)); - return result; - } - - assoc_size = le16_to_cpu(assoc_info->Length); - if (result < assoc_size) { - dev_err(dev, "Not enough data to decode association info " - "(%zu vs %zu bytes required)\n", - (size_t)assoc_size, sizeof(*assoc_info)); - return result; - } - /* - * From now on, we just verify, but won't error out unless we - * don't find the AR_TYPE_WUSB_{RETRIEVE_HOST_INFO,ASSOCIATE} - * types. - */ - itr = cbaf->buffer + sizeof(*assoc_info); - top = cbaf->buffer + assoc_size; - dev_dbg(dev, "Found %u association requests (%zu bytes)\n", - assoc_info->NumAssociationRequests, assoc_size); - - while (itr < top) { - u16 ar_type, ar_subtype; - u32 ar_size; - const char *ar_name; - - assoc_request = itr; - - if (top - itr < sizeof(*assoc_request)) { - dev_err(dev, "Not enough data to decode association " - "request (%zu vs %zu bytes needed)\n", - top - itr, sizeof(*assoc_request)); - break; - } - - ar_type = le16_to_cpu(assoc_request->AssociationTypeId); - ar_subtype = le16_to_cpu(assoc_request->AssociationSubTypeId); - ar_size = le32_to_cpu(assoc_request->AssociationTypeInfoSize); - ar_name = "unknown"; - - switch (ar_type) { - case AR_TYPE_WUSB: - /* Verify we have what is mandated by [WUSB-AM]. */ - switch (ar_subtype) { - case AR_TYPE_WUSB_RETRIEVE_HOST_INFO: - ar_name = "RETRIEVE_HOST_INFO"; - ar_rhi = 1; - break; - case AR_TYPE_WUSB_ASSOCIATE: - /* send assoc data */ - ar_name = "ASSOCIATE"; - ar_assoc = 1; - break; - } - break; - } - - dev_dbg(dev, "Association request #%02u: 0x%04x/%04x " - "(%zu bytes): %s\n", - assoc_request->AssociationDataIndex, ar_type, - ar_subtype, (size_t)ar_size, ar_name); - - itr += sizeof(*assoc_request); - } - - if (!ar_rhi) { - dev_err(dev, "Missing RETRIEVE_HOST_INFO association " - "request\n"); - return -EINVAL; - } - if (!ar_assoc) { - dev_err(dev, "Missing ASSOCIATE association request\n"); - return -EINVAL; - } - - return 0; -} - -static const struct wusb_cbaf_host_info cbaf_host_info_defaults = { - .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, - .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB), - .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, - .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_RETRIEVE_HOST_INFO), - .CHID_hdr = WUSB_AR_CHID, - .LangID_hdr = WUSB_AR_LangID, - .HostFriendlyName_hdr = WUSB_AR_HostFriendlyName, -}; - -/* Send WUSB host information (CHID and name) to a CBAF device */ -static int cbaf_send_host_info(struct cbaf *cbaf) -{ - struct wusb_cbaf_host_info *hi; - size_t name_len; - size_t hi_size; - - hi = cbaf->buffer; - memset(hi, 0, sizeof(*hi)); - *hi = cbaf_host_info_defaults; - hi->CHID = cbaf->chid; - hi->LangID = 0; /* FIXME: I guess... */ - strlcpy(hi->HostFriendlyName, cbaf->host_name, CBA_NAME_LEN); - name_len = strlen(cbaf->host_name); - hi->HostFriendlyName_hdr.len = cpu_to_le16(name_len); - hi_size = sizeof(*hi) + name_len; - - return usb_control_msg(cbaf->usb_dev, - usb_sndctrlpipe(cbaf->usb_dev, 0), - CBAF_REQ_SET_ASSOCIATION_RESPONSE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0x0101, - cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, - hi, hi_size, USB_CTRL_SET_TIMEOUT); -} - -/* - * Get device's information (CDID) associated to CHID - * - * The device will return it's information (CDID, name, bandgroups) - * associated to the CHID we have set before, or 0 CDID and default - * name and bandgroup if no CHID set or unknown. - */ -static int cbaf_cdid_get(struct cbaf *cbaf) -{ - int result; - struct device *dev = &cbaf->usb_iface->dev; - struct wusb_cbaf_device_info *di; - size_t needed; - - di = cbaf->buffer; - result = usb_control_msg( - cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0), - CBAF_REQ_GET_ASSOCIATION_REQUEST, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0x0200, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, - di, cbaf->buffer_size, USB_CTRL_GET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Cannot request device information: %d\n", - result); - return result; - } - - needed = result < sizeof(*di) ? sizeof(*di) : le32_to_cpu(di->Length); - if (result < needed) { - dev_err(dev, "Not enough data in DEVICE_INFO reply (%zu vs " - "%zu bytes needed)\n", (size_t)result, needed); - return -ENOENT; - } - - strlcpy(cbaf->device_name, di->DeviceFriendlyName, CBA_NAME_LEN); - cbaf->cdid = di->CDID; - cbaf->device_band_groups = le16_to_cpu(di->BandGroups); - - return 0; -} - -static ssize_t cbaf_wusb_chid_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return sprintf(buf, "%16ph\n", cbaf->chid.data); -} - -static ssize_t cbaf_wusb_chid_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx", - &cbaf->chid.data[0] , &cbaf->chid.data[1], - &cbaf->chid.data[2] , &cbaf->chid.data[3], - &cbaf->chid.data[4] , &cbaf->chid.data[5], - &cbaf->chid.data[6] , &cbaf->chid.data[7], - &cbaf->chid.data[8] , &cbaf->chid.data[9], - &cbaf->chid.data[10], &cbaf->chid.data[11], - &cbaf->chid.data[12], &cbaf->chid.data[13], - &cbaf->chid.data[14], &cbaf->chid.data[15]); - - if (result != 16) - return -EINVAL; - - result = cbaf_send_host_info(cbaf); - if (result < 0) - return result; - result = cbaf_cdid_get(cbaf); - if (result < 0) - return result; - return size; -} -static DEVICE_ATTR(wusb_chid, 0600, cbaf_wusb_chid_show, cbaf_wusb_chid_store); - -static ssize_t cbaf_wusb_host_name_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->host_name); -} - -static ssize_t cbaf_wusb_host_name_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - result = sscanf(buf, "%63s", cbaf->host_name); - if (result != 1) - return -EINVAL; - - return size; -} -static DEVICE_ATTR(wusb_host_name, 0600, cbaf_wusb_host_name_show, - cbaf_wusb_host_name_store); - -static ssize_t cbaf_wusb_host_band_groups_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->host_band_groups); -} - -static ssize_t cbaf_wusb_host_band_groups_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - u16 band_groups = 0; - - result = sscanf(buf, "%04hx", &band_groups); - if (result != 1) - return -EINVAL; - - cbaf->host_band_groups = band_groups; - - return size; -} - -static DEVICE_ATTR(wusb_host_band_groups, 0600, - cbaf_wusb_host_band_groups_show, - cbaf_wusb_host_band_groups_store); - -static const struct wusb_cbaf_device_info cbaf_device_info_defaults = { - .Length_hdr = WUSB_AR_Length, - .CDID_hdr = WUSB_AR_CDID, - .BandGroups_hdr = WUSB_AR_BandGroups, - .LangID_hdr = WUSB_AR_LangID, - .DeviceFriendlyName_hdr = WUSB_AR_DeviceFriendlyName, -}; - -static ssize_t cbaf_wusb_cdid_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return sprintf(buf, "%16ph\n", cbaf->cdid.data); -} - -static ssize_t cbaf_wusb_cdid_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - struct wusb_ckhdid cdid; - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx", - &cdid.data[0] , &cdid.data[1], - &cdid.data[2] , &cdid.data[3], - &cdid.data[4] , &cdid.data[5], - &cdid.data[6] , &cdid.data[7], - &cdid.data[8] , &cdid.data[9], - &cdid.data[10], &cdid.data[11], - &cdid.data[12], &cdid.data[13], - &cdid.data[14], &cdid.data[15]); - if (result != 16) - return -EINVAL; - - cbaf->cdid = cdid; - - return size; -} -static DEVICE_ATTR(wusb_cdid, 0600, cbaf_wusb_cdid_show, cbaf_wusb_cdid_store); - -static ssize_t cbaf_wusb_device_band_groups_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->device_band_groups); -} - -static DEVICE_ATTR(wusb_device_band_groups, 0600, - cbaf_wusb_device_band_groups_show, - NULL); - -static ssize_t cbaf_wusb_device_name_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->device_name); -} -static DEVICE_ATTR(wusb_device_name, 0600, cbaf_wusb_device_name_show, NULL); - -static const struct wusb_cbaf_cc_data cbaf_cc_data_defaults = { - .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, - .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB), - .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, - .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_ASSOCIATE), - .Length_hdr = WUSB_AR_Length, - .Length = cpu_to_le32(sizeof(struct wusb_cbaf_cc_data)), - .ConnectionContext_hdr = WUSB_AR_ConnectionContext, - .BandGroups_hdr = WUSB_AR_BandGroups, -}; - -static const struct wusb_cbaf_cc_data_fail cbaf_cc_data_fail_defaults = { - .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, - .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, - .Length_hdr = WUSB_AR_Length, - .AssociationStatus_hdr = WUSB_AR_AssociationStatus, -}; - -/* - * Send a new CC to the device. - */ -static int cbaf_cc_upload(struct cbaf *cbaf) -{ - int result; - struct device *dev = &cbaf->usb_iface->dev; - struct wusb_cbaf_cc_data *ccd; - - ccd = cbaf->buffer; - *ccd = cbaf_cc_data_defaults; - ccd->CHID = cbaf->chid; - ccd->CDID = cbaf->cdid; - ccd->CK = cbaf->ck; - ccd->BandGroups = cpu_to_le16(cbaf->host_band_groups); - - dev_dbg(dev, "Trying to upload CC:\n"); - dev_dbg(dev, " CHID %16ph\n", ccd->CHID.data); - dev_dbg(dev, " CDID %16ph\n", ccd->CDID.data); - dev_dbg(dev, " Bandgroups 0x%04x\n", cbaf->host_band_groups); - - result = usb_control_msg( - cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0), - CBAF_REQ_SET_ASSOCIATION_RESPONSE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0x0201, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, - ccd, sizeof(*ccd), USB_CTRL_SET_TIMEOUT); - - return result; -} - -static ssize_t cbaf_wusb_ck_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx", - &cbaf->ck.data[0] , &cbaf->ck.data[1], - &cbaf->ck.data[2] , &cbaf->ck.data[3], - &cbaf->ck.data[4] , &cbaf->ck.data[5], - &cbaf->ck.data[6] , &cbaf->ck.data[7], - &cbaf->ck.data[8] , &cbaf->ck.data[9], - &cbaf->ck.data[10], &cbaf->ck.data[11], - &cbaf->ck.data[12], &cbaf->ck.data[13], - &cbaf->ck.data[14], &cbaf->ck.data[15]); - if (result != 16) - return -EINVAL; - - result = cbaf_cc_upload(cbaf); - if (result < 0) - return result; - - return size; -} -static DEVICE_ATTR(wusb_ck, 0600, NULL, cbaf_wusb_ck_store); - -static struct attribute *cbaf_dev_attrs[] = { - &dev_attr_wusb_host_name.attr, - &dev_attr_wusb_host_band_groups.attr, - &dev_attr_wusb_chid.attr, - &dev_attr_wusb_cdid.attr, - &dev_attr_wusb_device_name.attr, - &dev_attr_wusb_device_band_groups.attr, - &dev_attr_wusb_ck.attr, - NULL, -}; - -static const struct attribute_group cbaf_dev_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = cbaf_dev_attrs, -}; - -static int cbaf_probe(struct usb_interface *iface, - const struct usb_device_id *id) -{ - struct cbaf *cbaf; - struct device *dev = &iface->dev; - int result = -ENOMEM; - - cbaf = kzalloc(sizeof(*cbaf), GFP_KERNEL); - if (cbaf == NULL) - goto error_kzalloc; - cbaf->buffer = kmalloc(512, GFP_KERNEL); - if (cbaf->buffer == NULL) - goto error_kmalloc_buffer; - - cbaf->buffer_size = 512; - cbaf->usb_dev = usb_get_dev(interface_to_usbdev(iface)); - cbaf->usb_iface = usb_get_intf(iface); - result = cbaf_check(cbaf); - if (result < 0) { - dev_err(dev, "This device is not WUSB-CBAF compliant and is not supported yet.\n"); - goto error_check; - } - - result = sysfs_create_group(&dev->kobj, &cbaf_dev_attr_group); - if (result < 0) { - dev_err(dev, "Can't register sysfs attr group: %d\n", result); - goto error_create_group; - } - usb_set_intfdata(iface, cbaf); - return 0; - -error_create_group: -error_check: - usb_put_intf(iface); - usb_put_dev(cbaf->usb_dev); - kfree(cbaf->buffer); -error_kmalloc_buffer: - kfree(cbaf); -error_kzalloc: - return result; -} - -static void cbaf_disconnect(struct usb_interface *iface) -{ - struct cbaf *cbaf = usb_get_intfdata(iface); - struct device *dev = &iface->dev; - sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group); - usb_set_intfdata(iface, NULL); - usb_put_intf(iface); - usb_put_dev(cbaf->usb_dev); - kfree(cbaf->buffer); - /* paranoia: clean up crypto keys */ - kzfree(cbaf); -} - -static const struct usb_device_id cbaf_id_table[] = { - { USB_INTERFACE_INFO(0xef, 0x03, 0x01), }, - { }, -}; -MODULE_DEVICE_TABLE(usb, cbaf_id_table); - -static struct usb_driver cbaf_driver = { - .name = "wusb-cbaf", - .id_table = cbaf_id_table, - .probe = cbaf_probe, - .disconnect = cbaf_disconnect, -}; - -module_usb_driver(cbaf_driver); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Wireless USB Cable Based Association"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/wusbcore/crypto.c b/drivers/staging/wusbcore/crypto.c deleted file mode 100644 index d7d55ed19a98..000000000000 --- a/drivers/staging/wusbcore/crypto.c +++ /dev/null @@ -1,441 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Ultra Wide Band - * AES-128 CCM Encryption - * - * Copyright (C) 2007 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * We don't do any encryption here; we use the Linux Kernel's AES-128 - * crypto modules to construct keys and payload blocks in a way - * defined by WUSB1.0[6]. Check the erratas, as typos are are patched - * there. - * - * Thanks a zillion to John Keys for his help and clarifications over - * the designed-by-a-committee text. - * - * So the idea is that there is this basic Pseudo-Random-Function - * defined in WUSB1.0[6.5] which is the core of everything. It works - * by tweaking some blocks, AES crypting them and then xoring - * something else with them (this seems to be called CBC(AES) -- can - * you tell I know jack about crypto?). So we just funnel it into the - * Linux Crypto API. - * - * We leave a crypto test module so we can verify that vectors match, - * every now and then. - * - * Block size: 16 bytes -- AES seems to do things in 'block sizes'. I - * am learning a lot... - * - * Conveniently, some data structures that need to be - * funneled through AES are...16 bytes in size! - */ - -#include <crypto/aes.h> -#include <crypto/algapi.h> -#include <crypto/hash.h> -#include <crypto/skcipher.h> -#include <linux/crypto.h> -#include <linux/module.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/scatterlist.h> -#include "../uwb/uwb.h" -#include "include/wusb.h" - -static int debug_crypto_verify; - -module_param(debug_crypto_verify, int, 0); -MODULE_PARM_DESC(debug_crypto_verify, "verify the key generation algorithms"); - -static void wusb_key_dump(const void *buf, size_t len) -{ - print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_OFFSET, 16, 1, - buf, len, 0); -} - -/* - * Block of data, as understood by AES-CCM - * - * The code assumes this structure is nothing but a 16 byte array - * (packed in a struct to avoid common mess ups that I usually do with - * arrays and enforcing type checking). - */ -struct aes_ccm_block { - u8 data[16]; -} __attribute__((packed)); - -/* - * Counter-mode Blocks (WUSB1.0[6.4]) - * - * According to CCM (or so it seems), for the purpose of calculating - * the MIC, the message is broken in N counter-mode blocks, B0, B1, - * ... BN. - * - * B0 contains flags, the CCM nonce and l(m). - * - * B1 contains l(a), the MAC header, the encryption offset and padding. - * - * If EO is nonzero, additional blocks are built from payload bytes - * until EO is exhausted (FIXME: padding to 16 bytes, I guess). The - * padding is not xmitted. - */ - -/* WUSB1.0[T6.4] */ -struct aes_ccm_b0 { - u8 flags; /* 0x59, per CCM spec */ - struct aes_ccm_nonce ccm_nonce; - __be16 lm; -} __attribute__((packed)); - -/* WUSB1.0[T6.5] */ -struct aes_ccm_b1 { - __be16 la; - u8 mac_header[10]; - __le16 eo; - u8 security_reserved; /* This is always zero */ - u8 padding; /* 0 */ -} __attribute__((packed)); - -/* - * Encryption Blocks (WUSB1.0[6.4.4]) - * - * CCM uses Ax blocks to generate a keystream with which the MIC and - * the message's payload are encoded. A0 always encrypts/decrypts the - * MIC. Ax (x>0) are used for the successive payload blocks. - * - * The x is the counter, and is increased for each block. - */ -struct aes_ccm_a { - u8 flags; /* 0x01, per CCM spec */ - struct aes_ccm_nonce ccm_nonce; - __be16 counter; /* Value of x */ -} __attribute__((packed)); - -/* Scratch space for MAC calculations. */ -struct wusb_mac_scratch { - struct aes_ccm_b0 b0; - struct aes_ccm_b1 b1; - struct aes_ccm_a ax; -}; - -/* - * CC-MAC function WUSB1.0[6.5] - * - * Take a data string and produce the encrypted CBC Counter-mode MIC - * - * Note the names for most function arguments are made to (more or - * less) match those used in the pseudo-function definition given in - * WUSB1.0[6.5]. - * - * @tfm_cbc: CBC(AES) blkcipher handle (initialized) - * - * @tfm_aes: AES cipher handle (initialized) - * - * @mic: buffer for placing the computed MIC (Message Integrity - * Code). This is exactly 8 bytes, and we expect the buffer to - * be at least eight bytes in length. - * - * @key: 128 bit symmetric key - * - * @n: CCM nonce - * - * @a: ASCII string, 14 bytes long (I guess zero padded if needed; - * we use exactly 14 bytes). - * - * @b: data stream to be processed - * - * @blen: size of b... - * - * Still not very clear how this is done, but looks like this: we - * create block B0 (as WUSB1.0[6.5] says), then we AES-crypt it with - * @key. We bytewise xor B0 with B1 (1) and AES-crypt that. Then we - * take the payload and divide it in blocks (16 bytes), xor them with - * the previous crypto result (16 bytes) and crypt it, repeat the next - * block with the output of the previous one, rinse wash. So we use - * the CBC-MAC(AES) shash, that does precisely that. The IV (Initial - * Vector) is 16 bytes and is set to zero, so - * - * (1) Created as 6.5 says, again, using as l(a) 'Blen + 14', and - * using the 14 bytes of @a to fill up - * b1.{mac_header,e0,security_reserved,padding}. - * - * NOTE: The definition of l(a) in WUSB1.0[6.5] vs the definition of - * l(m) is orthogonal, they bear no relationship, so it is not - * in conflict with the parameter's relation that - * WUSB1.0[6.4.2]) defines. - * - * NOTE: WUSB1.0[A.1]: Host Nonce is missing a nibble? (1e); fixed in - * first errata released on 2005/07. - * - * NOTE: we need to clean IV to zero at each invocation to make sure - * we start with a fresh empty Initial Vector, so that the CBC - * works ok. - * - * NOTE: blen is not aligned to a block size, we'll pad zeros, that's - * what sg[4] is for. Maybe there is a smarter way to do this. - */ -static int wusb_ccm_mac(struct crypto_shash *tfm_cbcmac, - struct wusb_mac_scratch *scratch, - void *mic, - const struct aes_ccm_nonce *n, - const struct aes_ccm_label *a, const void *b, - size_t blen) -{ - SHASH_DESC_ON_STACK(desc, tfm_cbcmac); - u8 iv[AES_BLOCK_SIZE]; - - /* - * These checks should be compile time optimized out - * ensure @a fills b1's mac_header and following fields - */ - BUILD_BUG_ON(sizeof(*a) != sizeof(scratch->b1) - sizeof(scratch->b1.la)); - BUILD_BUG_ON(sizeof(scratch->b0) != sizeof(struct aes_ccm_block)); - BUILD_BUG_ON(sizeof(scratch->b1) != sizeof(struct aes_ccm_block)); - BUILD_BUG_ON(sizeof(scratch->ax) != sizeof(struct aes_ccm_block)); - - /* Setup B0 */ - scratch->b0.flags = 0x59; /* Format B0 */ - scratch->b0.ccm_nonce = *n; - scratch->b0.lm = cpu_to_be16(0); /* WUSB1.0[6.5] sez l(m) is 0 */ - - /* Setup B1 - * - * The WUSB spec is anything but clear! WUSB1.0[6.5] - * says that to initialize B1 from A with 'l(a) = blen + - * 14'--after clarification, it means to use A's contents - * for MAC Header, EO, sec reserved and padding. - */ - scratch->b1.la = cpu_to_be16(blen + 14); - memcpy(&scratch->b1.mac_header, a, sizeof(*a)); - - desc->tfm = tfm_cbcmac; - crypto_shash_init(desc); - crypto_shash_update(desc, (u8 *)&scratch->b0, sizeof(scratch->b0) + - sizeof(scratch->b1)); - crypto_shash_finup(desc, b, blen, iv); - - /* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5] - * The procedure is to AES crypt the A0 block and XOR the MIC - * Tag against it; we only do the first 8 bytes and place it - * directly in the destination buffer. - */ - scratch->ax.flags = 0x01; /* as per WUSB 1.0 spec */ - scratch->ax.ccm_nonce = *n; - scratch->ax.counter = 0; - - /* reuse the CBC-MAC transform to perform the single block encryption */ - crypto_shash_digest(desc, (u8 *)&scratch->ax, sizeof(scratch->ax), - (u8 *)&scratch->ax); - - crypto_xor_cpy(mic, (u8 *)&scratch->ax, iv, 8); - - return 8; -} - -/* - * WUSB Pseudo Random Function (WUSB1.0[6.5]) - * - * @b: buffer to the source data; cannot be a global or const local - * (will confuse the scatterlists) - */ -ssize_t wusb_prf(void *out, size_t out_size, - const u8 key[16], const struct aes_ccm_nonce *_n, - const struct aes_ccm_label *a, - const void *b, size_t blen, size_t len) -{ - ssize_t result, bytes = 0, bitr; - struct aes_ccm_nonce n = *_n; - struct crypto_shash *tfm_cbcmac; - struct wusb_mac_scratch scratch; - u64 sfn = 0; - __le64 sfn_le; - - tfm_cbcmac = crypto_alloc_shash("cbcmac(aes)", 0, 0); - if (IS_ERR(tfm_cbcmac)) { - result = PTR_ERR(tfm_cbcmac); - printk(KERN_ERR "E: can't load CBCMAC-AES: %d\n", (int)result); - goto error_alloc_cbcmac; - } - - result = crypto_shash_setkey(tfm_cbcmac, key, AES_BLOCK_SIZE); - if (result < 0) { - printk(KERN_ERR "E: can't set CBCMAC-AES key: %d\n", (int)result); - goto error_setkey_cbcmac; - } - - for (bitr = 0; bitr < (len + 63) / 64; bitr++) { - sfn_le = cpu_to_le64(sfn++); - memcpy(&n.sfn, &sfn_le, sizeof(n.sfn)); /* n.sfn++... */ - result = wusb_ccm_mac(tfm_cbcmac, &scratch, out + bytes, - &n, a, b, blen); - if (result < 0) - goto error_ccm_mac; - bytes += result; - } - result = bytes; - -error_ccm_mac: -error_setkey_cbcmac: - crypto_free_shash(tfm_cbcmac); -error_alloc_cbcmac: - return result; -} - -/* WUSB1.0[A.2] test vectors */ -static const u8 stv_hsmic_key[16] = { - 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d, - 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f -}; - -static const struct aes_ccm_nonce stv_hsmic_n = { - .sfn = { 0 }, - .tkid = { 0x76, 0x98, 0x01, }, - .dest_addr = { .data = { 0xbe, 0x00 } }, - .src_addr = { .data = { 0x76, 0x98 } }, -}; - -/* - * Out-of-band MIC Generation verification code - * - */ -static int wusb_oob_mic_verify(void) -{ - int result; - u8 mic[8]; - /* WUSB1.0[A.2] test vectors */ - static const struct usb_handshake stv_hsmic_hs = { - .bMessageNumber = 2, - .bStatus = 00, - .tTKID = { 0x76, 0x98, 0x01 }, - .bReserved = 00, - .CDID = { 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, - 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, - 0x3c, 0x3d, 0x3e, 0x3f }, - .nonce = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, - 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, - 0x2c, 0x2d, 0x2e, 0x2f }, - .MIC = { 0x75, 0x6a, 0x97, 0x51, 0x0c, 0x8c, - 0x14, 0x7b }, - }; - size_t hs_size; - - result = wusb_oob_mic(mic, stv_hsmic_key, &stv_hsmic_n, &stv_hsmic_hs); - if (result < 0) - printk(KERN_ERR "E: WUSB OOB MIC test: failed: %d\n", result); - else if (memcmp(stv_hsmic_hs.MIC, mic, sizeof(mic))) { - printk(KERN_ERR "E: OOB MIC test: " - "mismatch between MIC result and WUSB1.0[A2]\n"); - hs_size = sizeof(stv_hsmic_hs) - sizeof(stv_hsmic_hs.MIC); - printk(KERN_ERR "E: Handshake2 in: (%zu bytes)\n", hs_size); - wusb_key_dump(&stv_hsmic_hs, hs_size); - printk(KERN_ERR "E: CCM Nonce in: (%zu bytes)\n", - sizeof(stv_hsmic_n)); - wusb_key_dump(&stv_hsmic_n, sizeof(stv_hsmic_n)); - printk(KERN_ERR "E: MIC out:\n"); - wusb_key_dump(mic, sizeof(mic)); - printk(KERN_ERR "E: MIC out (from WUSB1.0[A.2]):\n"); - wusb_key_dump(stv_hsmic_hs.MIC, sizeof(stv_hsmic_hs.MIC)); - result = -EINVAL; - } else - result = 0; - return result; -} - -/* - * Test vectors for Key derivation - * - * These come from WUSB1.0[6.5.1], the vectors in WUSB1.0[A.1] - * (errata corrected in 2005/07). - */ -static const u8 stv_key_a1[16] __attribute__ ((__aligned__(4))) = { - 0xf0, 0xe1, 0xd2, 0xc3, 0xb4, 0xa5, 0x96, 0x87, - 0x78, 0x69, 0x5a, 0x4b, 0x3c, 0x2d, 0x1e, 0x0f -}; - -static const struct aes_ccm_nonce stv_keydvt_n_a1 = { - .sfn = { 0 }, - .tkid = { 0x76, 0x98, 0x01, }, - .dest_addr = { .data = { 0xbe, 0x00 } }, - .src_addr = { .data = { 0x76, 0x98 } }, -}; - -static const struct wusb_keydvt_out stv_keydvt_out_a1 = { - .kck = { - 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d, - 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f - }, - .ptk = { - 0xc8, 0x70, 0x62, 0x82, 0xb6, 0x7c, 0xe9, 0x06, - 0x7b, 0xc5, 0x25, 0x69, 0xf2, 0x36, 0x61, 0x2d - } -}; - -/* - * Performa a test to make sure we match the vectors defined in - * WUSB1.0[A.1](Errata2006/12) - */ -static int wusb_key_derive_verify(void) -{ - int result = 0; - struct wusb_keydvt_out keydvt_out; - /* These come from WUSB1.0[A.1] + 2006/12 errata */ - static const struct wusb_keydvt_in stv_keydvt_in_a1 = { - .hnonce = { - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f - }, - .dnonce = { - 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, - 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f - } - }; - - result = wusb_key_derive(&keydvt_out, stv_key_a1, &stv_keydvt_n_a1, - &stv_keydvt_in_a1); - if (result < 0) - printk(KERN_ERR "E: WUSB key derivation test: " - "derivation failed: %d\n", result); - if (memcmp(&stv_keydvt_out_a1, &keydvt_out, sizeof(keydvt_out))) { - printk(KERN_ERR "E: WUSB key derivation test: " - "mismatch between key derivation result " - "and WUSB1.0[A1] Errata 2006/12\n"); - printk(KERN_ERR "E: keydvt in: key\n"); - wusb_key_dump(stv_key_a1, sizeof(stv_key_a1)); - printk(KERN_ERR "E: keydvt in: nonce\n"); - wusb_key_dump(&stv_keydvt_n_a1, sizeof(stv_keydvt_n_a1)); - printk(KERN_ERR "E: keydvt in: hnonce & dnonce\n"); - wusb_key_dump(&stv_keydvt_in_a1, sizeof(stv_keydvt_in_a1)); - printk(KERN_ERR "E: keydvt out: KCK\n"); - wusb_key_dump(&keydvt_out.kck, sizeof(keydvt_out.kck)); - printk(KERN_ERR "E: keydvt out: PTK\n"); - wusb_key_dump(&keydvt_out.ptk, sizeof(keydvt_out.ptk)); - result = -EINVAL; - } else - result = 0; - return result; -} - -/* - * Initialize crypto system - * - * FIXME: we do nothing now, other than verifying. Later on we'll - * cache the encryption stuff, so that's why we have a separate init. - */ -int wusb_crypto_init(void) -{ - int result; - - if (debug_crypto_verify) { - result = wusb_key_derive_verify(); - if (result < 0) - return result; - return wusb_oob_mic_verify(); - } - return 0; -} - -void wusb_crypto_exit(void) -{ - /* FIXME: free cached crypto transforms */ -} diff --git a/drivers/staging/wusbcore/dev-sysfs.c b/drivers/staging/wusbcore/dev-sysfs.c deleted file mode 100644 index 67b0a4c412b2..000000000000 --- a/drivers/staging/wusbcore/dev-sysfs.c +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB devices - * sysfs bindings - * - * Copyright (C) 2007 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Get them out of the way... - */ - -#include <linux/jiffies.h> -#include <linux/ctype.h> -#include <linux/workqueue.h> -#include "wusbhc.h" - -static ssize_t wusb_disconnect_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct usb_device *usb_dev; - struct wusbhc *wusbhc; - unsigned command; - u8 port_idx; - - if (sscanf(buf, "%u", &command) != 1) - return -EINVAL; - if (command == 0) - return size; - usb_dev = to_usb_device(dev); - wusbhc = wusbhc_get_by_usb_dev(usb_dev); - if (wusbhc == NULL) - return -ENODEV; - - mutex_lock(&wusbhc->mutex); - port_idx = wusb_port_no_to_idx(usb_dev->portnum); - __wusbhc_dev_disable(wusbhc, port_idx); - mutex_unlock(&wusbhc->mutex); - wusbhc_put(wusbhc); - return size; -} -static DEVICE_ATTR_WO(wusb_disconnect); - -static ssize_t wusb_cdid_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - ssize_t result; - struct wusb_dev *wusb_dev; - - wusb_dev = wusb_dev_get_by_usb_dev(to_usb_device(dev)); - if (wusb_dev == NULL) - return -ENODEV; - result = sprintf(buf, "%16ph\n", wusb_dev->cdid.data); - wusb_dev_put(wusb_dev); - return result; -} -static DEVICE_ATTR_RO(wusb_cdid); - -static ssize_t wusb_ck_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - int result; - struct usb_device *usb_dev; - struct wusbhc *wusbhc; - struct wusb_ckhdid ck; - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx\n", - &ck.data[0] , &ck.data[1], - &ck.data[2] , &ck.data[3], - &ck.data[4] , &ck.data[5], - &ck.data[6] , &ck.data[7], - &ck.data[8] , &ck.data[9], - &ck.data[10], &ck.data[11], - &ck.data[12], &ck.data[13], - &ck.data[14], &ck.data[15]); - if (result != 16) - return -EINVAL; - - usb_dev = to_usb_device(dev); - wusbhc = wusbhc_get_by_usb_dev(usb_dev); - if (wusbhc == NULL) - return -ENODEV; - result = wusb_dev_4way_handshake(wusbhc, usb_dev->wusb_dev, &ck); - memzero_explicit(&ck, sizeof(ck)); - wusbhc_put(wusbhc); - return result < 0 ? result : size; -} -static DEVICE_ATTR_WO(wusb_ck); - -static struct attribute *wusb_dev_attrs[] = { - &dev_attr_wusb_disconnect.attr, - &dev_attr_wusb_cdid.attr, - &dev_attr_wusb_ck.attr, - NULL, -}; - -static const struct attribute_group wusb_dev_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = wusb_dev_attrs, -}; - -int wusb_dev_sysfs_add(struct wusbhc *wusbhc, struct usb_device *usb_dev, - struct wusb_dev *wusb_dev) -{ - int result = sysfs_create_group(&usb_dev->dev.kobj, - &wusb_dev_attr_group); - struct device *dev = &usb_dev->dev; - if (result < 0) - dev_err(dev, "Cannot register WUSB-dev attributes: %d\n", - result); - return result; -} - -void wusb_dev_sysfs_rm(struct wusb_dev *wusb_dev) -{ - struct usb_device *usb_dev = wusb_dev->usb_dev; - if (usb_dev) - sysfs_remove_group(&usb_dev->dev.kobj, &wusb_dev_attr_group); -} diff --git a/drivers/staging/wusbcore/devconnect.c b/drivers/staging/wusbcore/devconnect.c deleted file mode 100644 index 1170f8baf608..000000000000 --- a/drivers/staging/wusbcore/devconnect.c +++ /dev/null @@ -1,1085 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) - * Device Connect handling - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - * FIXME: this file needs to be broken up, it's grown too big - * - * - * WUSB1.0[7.1, 7.5.1, ] - * - * WUSB device connection is kind of messy. Some background: - * - * When a device wants to connect it scans the UWB radio channels - * looking for a WUSB Channel; a WUSB channel is defined by MMCs - * (Micro Managed Commands or something like that) [see - * Design-overview for more on this] . - * - * So, device scans the radio, finds MMCs and thus a host and checks - * when the next DNTS is. It sends a Device Notification Connect - * (DN_Connect); the host picks it up (through nep.c and notif.c, ends - * up in wusb_devconnect_ack(), which creates a wusb_dev structure in - * wusbhc->port[port_number].wusb_dev), assigns an unauth address - * to the device (this means from 0x80 to 0xfe) and sends, in the MMC - * a Connect Ack Information Element (ConnAck IE). - * - * So now the device now has a WUSB address. From now on, we use - * that to talk to it in the RPipes. - * - * ASSUMPTIONS: - * - * - We use the the as device address the port number where it is - * connected (port 0 doesn't exist). For unauth, it is 128 + that. - * - * ROADMAP: - * - * This file contains the logic for doing that--entry points: - * - * wusb_devconnect_ack() Ack a device until _acked() called. - * Called by notif.c:wusb_handle_dn_connect() - * when a DN_Connect is received. - * - * wusb_devconnect_acked() Ack done, release resources. - * - * wusb_handle_dn_alive() Called by notif.c:wusb_handle_dn() - * for processing a DN_Alive pong from a device. - * - * wusb_handle_dn_disconnect()Called by notif.c:wusb_handle_dn() to - * process a disconnect request from a - * device. - * - * __wusb_dev_disable() Called by rh.c:wusbhc_rh_clear_port_feat() when - * disabling a port. - * - * wusb_devconnect_create() Called when creating the host by - * lc.c:wusbhc_create(). - * - * wusb_devconnect_destroy() Cleanup called removing the host. Called - * by lc.c:wusbhc_destroy(). - * - * Each Wireless USB host maintains a list of DN_Connect requests - * (actually we maintain a list of pending Connect Acks, the - * wusbhc->ca_list). - * - * LIFE CYCLE OF port->wusb_dev - * - * Before the @wusbhc structure put()s the reference it owns for - * port->wusb_dev [and clean the wusb_dev pointer], it needs to - * lock @wusbhc->mutex. - */ - -#include <linux/jiffies.h> -#include <linux/ctype.h> -#include <linux/slab.h> -#include <linux/workqueue.h> -#include <linux/export.h> -#include "wusbhc.h" - -static void wusbhc_devconnect_acked_work(struct work_struct *work); - -static void wusb_dev_free(struct wusb_dev *wusb_dev) -{ - kfree(wusb_dev); -} - -static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc) -{ - struct wusb_dev *wusb_dev; - - wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL); - if (wusb_dev == NULL) - goto err; - - wusb_dev->wusbhc = wusbhc; - - INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work); - - return wusb_dev; -err: - wusb_dev_free(wusb_dev); - return NULL; -} - - -/* - * Using the Connect-Ack list, fill out the @wusbhc Connect-Ack WUSB IE - * properly so that it can be added to the MMC. - * - * We just get the @wusbhc->ca_list and fill out the first four ones or - * less (per-spec WUSB1.0[7.5, before T7-38). If the ConnectAck WUSB - * IE is not allocated, we alloc it. - * - * @wusbhc->mutex must be taken - */ -static void wusbhc_fill_cack_ie(struct wusbhc *wusbhc) -{ - unsigned cnt; - struct wusb_dev *dev_itr; - struct wuie_connect_ack *cack_ie; - - cack_ie = &wusbhc->cack_ie; - cnt = 0; - list_for_each_entry(dev_itr, &wusbhc->cack_list, cack_node) { - cack_ie->blk[cnt].CDID = dev_itr->cdid; - cack_ie->blk[cnt].bDeviceAddress = dev_itr->addr; - if (++cnt >= WUIE_ELT_MAX) - break; - } - cack_ie->hdr.bLength = sizeof(cack_ie->hdr) - + cnt * sizeof(cack_ie->blk[0]); -} - -/* - * Register a new device that wants to connect - * - * A new device wants to connect, so we add it to the Connect-Ack - * list. We give it an address in the unauthorized range (bit 8 set); - * user space will have to drive authorization further on. - * - * @dev_addr: address to use for the device (which is also the port - * number). - * - * @wusbhc->mutex must be taken - */ -static struct wusb_dev *wusbhc_cack_add(struct wusbhc *wusbhc, - struct wusb_dn_connect *dnc, - const char *pr_cdid, u8 port_idx) -{ - struct device *dev = wusbhc->dev; - struct wusb_dev *wusb_dev; - int new_connection = wusb_dn_connect_new_connection(dnc); - u8 dev_addr; - int result; - - /* Is it registered already? */ - list_for_each_entry(wusb_dev, &wusbhc->cack_list, cack_node) - if (!memcmp(&wusb_dev->cdid, &dnc->CDID, - sizeof(wusb_dev->cdid))) - return wusb_dev; - /* We don't have it, create an entry, register it */ - wusb_dev = wusb_dev_alloc(wusbhc); - if (wusb_dev == NULL) - return NULL; - wusb_dev_init(wusb_dev); - wusb_dev->cdid = dnc->CDID; - wusb_dev->port_idx = port_idx; - - /* - * Devices are always available within the cluster reservation - * and since the hardware will take the intersection of the - * per-device availability and the cluster reservation, the - * per-device availability can simply be set to always - * available. - */ - bitmap_fill(wusb_dev->availability.bm, UWB_NUM_MAS); - - /* FIXME: handle reconnects instead of assuming connects are - always new. */ - if (1 && new_connection == 0) - new_connection = 1; - if (new_connection) { - dev_addr = (port_idx + 2) | WUSB_DEV_ADDR_UNAUTH; - - dev_info(dev, "Connecting new WUSB device to address %u, " - "port %u\n", dev_addr, port_idx); - - result = wusb_set_dev_addr(wusbhc, wusb_dev, dev_addr); - if (result < 0) - return NULL; - } - wusb_dev->entry_ts = jiffies; - list_add_tail(&wusb_dev->cack_node, &wusbhc->cack_list); - wusbhc->cack_count++; - wusbhc_fill_cack_ie(wusbhc); - - return wusb_dev; -} - -/* - * Remove a Connect-Ack context entry from the HCs view - * - * @wusbhc->mutex must be taken - */ -static void wusbhc_cack_rm(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - list_del_init(&wusb_dev->cack_node); - wusbhc->cack_count--; - wusbhc_fill_cack_ie(wusbhc); -} - -/* - * @wusbhc->mutex must be taken */ -static -void wusbhc_devconnect_acked(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - wusbhc_cack_rm(wusbhc, wusb_dev); - if (wusbhc->cack_count) - wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr); - else - wusbhc_mmcie_rm(wusbhc, &wusbhc->cack_ie.hdr); -} - -static void wusbhc_devconnect_acked_work(struct work_struct *work) -{ - struct wusb_dev *wusb_dev = container_of(work, struct wusb_dev, - devconnect_acked_work); - struct wusbhc *wusbhc = wusb_dev->wusbhc; - - mutex_lock(&wusbhc->mutex); - wusbhc_devconnect_acked(wusbhc, wusb_dev); - mutex_unlock(&wusbhc->mutex); - - wusb_dev_put(wusb_dev); -} - -/* - * Ack a device for connection - * - * FIXME: docs - * - * @pr_cdid: Printable CDID...hex Use @dnc->cdid for the real deal. - * - * So we get the connect ack IE (may have been allocated already), - * find an empty connect block, an empty virtual port, create an - * address with it (see below), make it an unauth addr [bit 7 set] and - * set the MMC. - * - * Addresses: because WUSB hosts have no downstream hubs, we can do a - * 1:1 mapping between 'port number' and device - * address. This simplifies many things, as during this - * initial connect phase the USB stack has no knowledge of - * the device and hasn't assigned an address yet--we know - * USB's choose_address() will use the same heuristics we - * use here, so we can assume which address will be assigned. - * - * USB stack always assigns address 1 to the root hub, so - * to the port number we add 2 (thus virtual port #0 is - * addr #2). - * - * @wusbhc shall be referenced - */ -static -void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc, - const char *pr_cdid) -{ - int result; - struct device *dev = wusbhc->dev; - struct wusb_dev *wusb_dev; - struct wusb_port *port; - unsigned idx; - - mutex_lock(&wusbhc->mutex); - - /* Check we are not handling it already */ - for (idx = 0; idx < wusbhc->ports_max; idx++) { - port = wusb_port_by_idx(wusbhc, idx); - if (port->wusb_dev - && memcmp(&dnc->CDID, &port->wusb_dev->cdid, sizeof(dnc->CDID)) == 0) - goto error_unlock; - } - /* Look up those fake ports we have for a free one */ - for (idx = 0; idx < wusbhc->ports_max; idx++) { - port = wusb_port_by_idx(wusbhc, idx); - if ((port->status & USB_PORT_STAT_POWER) - && !(port->status & USB_PORT_STAT_CONNECTION)) - break; - } - if (idx >= wusbhc->ports_max) { - dev_err(dev, "Host controller can't connect more devices " - "(%u already connected); device %s rejected\n", - wusbhc->ports_max, pr_cdid); - /* NOTE: we could send a WUIE_Disconnect here, but we haven't - * event acked, so the device will eventually timeout the - * connection, right? */ - goto error_unlock; - } - - /* Make sure we are using no crypto on that "virtual port" */ - wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0); - - /* Grab a filled in Connect-Ack context, fill out the - * Connect-Ack Wireless USB IE, set the MMC */ - wusb_dev = wusbhc_cack_add(wusbhc, dnc, pr_cdid, idx); - if (wusb_dev == NULL) - goto error_unlock; - result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr); - if (result < 0) - goto error_unlock; - /* Give the device at least 2ms (WUSB1.0[7.5.1p3]), let's do - * three for a good measure */ - msleep(3); - port->wusb_dev = wusb_dev; - port->status |= USB_PORT_STAT_CONNECTION; - port->change |= USB_PORT_STAT_C_CONNECTION; - /* Now the port status changed to connected; hub_wq will - * pick the change up and try to reset the port to bring it to - * the enabled state--so this process returns up to the stack - * and it calls back into wusbhc_rh_port_reset(). - */ -error_unlock: - mutex_unlock(&wusbhc->mutex); - return; - -} - -/* - * Disconnect a Wireless USB device from its fake port - * - * Marks the port as disconnected so that hub_wq can pick up the change - * and drops our knowledge about the device. - * - * Assumes there is a device connected - * - * @port_index: zero based port number - * - * NOTE: @wusbhc->mutex is locked - * - * WARNING: From here it is not very safe to access anything hanging off - * wusb_dev - */ -static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, - struct wusb_port *port) -{ - struct wusb_dev *wusb_dev = port->wusb_dev; - - port->status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE - | USB_PORT_STAT_SUSPEND | USB_PORT_STAT_RESET - | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); - port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; - if (wusb_dev) { - dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx); - if (!list_empty(&wusb_dev->cack_node)) - list_del_init(&wusb_dev->cack_node); - /* For the one in cack_add() */ - wusb_dev_put(wusb_dev); - } - port->wusb_dev = NULL; - - /* After a device disconnects, change the GTK (see [WUSB] - * section 6.2.11.2). */ - if (wusbhc->active) - wusbhc_gtk_rekey(wusbhc); - - /* The Wireless USB part has forgotten about the device already; now - * hub_wq's timer will pick up the disconnection and remove the USB - * device from the system - */ -} - -/* - * Refresh the list of keep alives to emit in the MMC - * - * We only publish the first four devices that have a coming timeout - * condition. Then when we are done processing those, we go for the - * next ones. We ignore the ones that have timed out already (they'll - * be purged). - * - * This might cause the first devices to timeout the last devices in - * the port array...FIXME: come up with a better algorithm? - * - * Note we can't do much about MMC's ops errors; we hope next refresh - * will kind of handle it. - * - * NOTE: @wusbhc->mutex is locked - */ -static void __wusbhc_keep_alive(struct wusbhc *wusbhc) -{ - struct device *dev = wusbhc->dev; - unsigned cnt; - struct wusb_dev *wusb_dev; - struct wusb_port *wusb_port; - struct wuie_keep_alive *ie = &wusbhc->keep_alive_ie; - unsigned keep_alives, old_keep_alives; - - old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr); - keep_alives = 0; - for (cnt = 0; - keep_alives < WUIE_ELT_MAX && cnt < wusbhc->ports_max; - cnt++) { - unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout); - - wusb_port = wusb_port_by_idx(wusbhc, cnt); - wusb_dev = wusb_port->wusb_dev; - - if (wusb_dev == NULL) - continue; - if (wusb_dev->usb_dev == NULL) - continue; - - if (time_after(jiffies, wusb_dev->entry_ts + tt)) { - dev_err(dev, "KEEPALIVE: device %u timed out\n", - wusb_dev->addr); - __wusbhc_dev_disconnect(wusbhc, wusb_port); - } else if (time_after(jiffies, wusb_dev->entry_ts + tt/3)) { - /* Approaching timeout cut off, need to refresh */ - ie->bDeviceAddress[keep_alives++] = wusb_dev->addr; - } - } - if (keep_alives & 0x1) /* pad to even number ([WUSB] section 7.5.9) */ - ie->bDeviceAddress[keep_alives++] = 0x7f; - ie->hdr.bLength = sizeof(ie->hdr) + - keep_alives*sizeof(ie->bDeviceAddress[0]); - if (keep_alives > 0) - wusbhc_mmcie_set(wusbhc, 10, 5, &ie->hdr); - else if (old_keep_alives != 0) - wusbhc_mmcie_rm(wusbhc, &ie->hdr); -} - -/* - * Do a run through all devices checking for timeouts - */ -static void wusbhc_keep_alive_run(struct work_struct *ws) -{ - struct delayed_work *dw = to_delayed_work(ws); - struct wusbhc *wusbhc = container_of(dw, struct wusbhc, keep_alive_timer); - - mutex_lock(&wusbhc->mutex); - __wusbhc_keep_alive(wusbhc); - mutex_unlock(&wusbhc->mutex); - - queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, - msecs_to_jiffies(wusbhc->trust_timeout / 2)); -} - -/* - * Find the wusb_dev from its device address. - * - * The device can be found directly from the address (see - * wusb_cack_add() for where the device address is set to port_idx - * +2), except when the address is zero. - */ -static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr) -{ - int p; - - if (addr == 0xff) /* unconnected */ - return NULL; - - if (addr > 0) { - int port = (addr & ~0x80) - 2; - if (port < 0 || port >= wusbhc->ports_max) - return NULL; - return wusb_port_by_idx(wusbhc, port)->wusb_dev; - } - - /* Look for the device with address 0. */ - for (p = 0; p < wusbhc->ports_max; p++) { - struct wusb_dev *wusb_dev = wusb_port_by_idx(wusbhc, p)->wusb_dev; - if (wusb_dev && wusb_dev->addr == addr) - return wusb_dev; - } - return NULL; -} - -/* - * Handle a DN_Alive notification (WUSB1.0[7.6.1]) - * - * This just updates the device activity timestamp and then refreshes - * the keep alive IE. - * - * @wusbhc shall be referenced and unlocked - */ -static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, u8 srcaddr) -{ - struct wusb_dev *wusb_dev; - - mutex_lock(&wusbhc->mutex); - wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr); - if (wusb_dev == NULL) { - dev_dbg(wusbhc->dev, "ignoring DN_Alive from unconnected device %02x\n", - srcaddr); - } else { - wusb_dev->entry_ts = jiffies; - __wusbhc_keep_alive(wusbhc); - } - mutex_unlock(&wusbhc->mutex); -} - -/* - * Handle a DN_Connect notification (WUSB1.0[7.6.1]) - * - * @wusbhc - * @pkt_hdr - * @size: Size of the buffer where the notification resides; if the - * notification data suggests there should be more data than - * available, an error will be signaled and the whole buffer - * consumed. - * - * @wusbhc->mutex shall be held - */ -static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc, - struct wusb_dn_hdr *dn_hdr, - size_t size) -{ - struct device *dev = wusbhc->dev; - struct wusb_dn_connect *dnc; - char pr_cdid[WUSB_CKHDID_STRSIZE]; - static const char *beacon_behaviour[] = { - "reserved", - "self-beacon", - "directed-beacon", - "no-beacon" - }; - - if (size < sizeof(*dnc)) { - dev_err(dev, "DN CONNECT: short notification (%zu < %zu)\n", - size, sizeof(*dnc)); - return; - } - - dnc = container_of(dn_hdr, struct wusb_dn_connect, hdr); - sprintf(pr_cdid, "%16ph", dnc->CDID.data); - dev_info(dev, "DN CONNECT: device %s @ %x (%s) wants to %s\n", - pr_cdid, - wusb_dn_connect_prev_dev_addr(dnc), - beacon_behaviour[wusb_dn_connect_beacon_behavior(dnc)], - wusb_dn_connect_new_connection(dnc) ? "connect" : "reconnect"); - /* ACK the connect */ - wusbhc_devconnect_ack(wusbhc, dnc, pr_cdid); -} - -/* - * Handle a DN_Disconnect notification (WUSB1.0[7.6.1]) - * - * Device is going down -- do the disconnect. - * - * @wusbhc shall be referenced and unlocked - */ -static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, u8 srcaddr) -{ - struct device *dev = wusbhc->dev; - struct wusb_dev *wusb_dev; - - mutex_lock(&wusbhc->mutex); - wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr); - if (wusb_dev == NULL) { - dev_dbg(dev, "ignoring DN DISCONNECT from unconnected device %02x\n", - srcaddr); - } else { - dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", - wusb_dev->addr); - __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, - wusb_dev->port_idx)); - } - mutex_unlock(&wusbhc->mutex); -} - -/* - * Handle a Device Notification coming a host - * - * The Device Notification comes from a host (HWA, DWA or WHCI) - * wrapped in a set of headers. Somebody else has peeled off those - * headers for us and we just get one Device Notifications. - * - * Invalid DNs (e.g., too short) are discarded. - * - * @wusbhc shall be referenced - * - * FIXMES: - * - implement priorities as in WUSB1.0[Table 7-55]? - */ -void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr, - struct wusb_dn_hdr *dn_hdr, size_t size) -{ - struct device *dev = wusbhc->dev; - - if (size < sizeof(struct wusb_dn_hdr)) { - dev_err(dev, "DN data shorter than DN header (%d < %d)\n", - (int)size, (int)sizeof(struct wusb_dn_hdr)); - return; - } - switch (dn_hdr->bType) { - case WUSB_DN_CONNECT: - wusbhc_handle_dn_connect(wusbhc, dn_hdr, size); - break; - case WUSB_DN_ALIVE: - wusbhc_handle_dn_alive(wusbhc, srcaddr); - break; - case WUSB_DN_DISCONNECT: - wusbhc_handle_dn_disconnect(wusbhc, srcaddr); - break; - case WUSB_DN_MASAVAILCHANGED: - case WUSB_DN_RWAKE: - case WUSB_DN_SLEEP: - /* FIXME: handle these DNs. */ - break; - case WUSB_DN_EPRDY: - /* The hardware handles these. */ - break; - default: - dev_warn(dev, "unknown DN %u (%d octets) from %u\n", - dn_hdr->bType, (int)size, srcaddr); - } -} -EXPORT_SYMBOL_GPL(wusbhc_handle_dn); - -/* - * Disconnect a WUSB device from a the cluster - * - * @wusbhc - * @port Fake port where the device is (wusbhc index, not USB port number). - * - * In Wireless USB, a disconnect is basically telling the device he is - * being disconnected and forgetting about him. - * - * We send the device a Device Disconnect IE (WUSB1.0[7.5.11]) for 100 - * ms and then keep going. - * - * We don't do much in case of error; we always pretend we disabled - * the port and disconnected the device. If physically the request - * didn't get there (many things can fail in the way there), the stack - * will reject the device's communication attempts. - * - * @wusbhc should be refcounted and locked - */ -void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port_idx) -{ - int result; - struct device *dev = wusbhc->dev; - struct wusb_dev *wusb_dev; - struct wuie_disconnect *ie; - - wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; - if (wusb_dev == NULL) { - /* reset no device? ignore */ - dev_dbg(dev, "DISCONNECT: no device at port %u, ignoring\n", - port_idx); - return; - } - __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); - - ie = kzalloc(sizeof(*ie), GFP_KERNEL); - if (ie == NULL) - return; - ie->hdr.bLength = sizeof(*ie); - ie->hdr.bIEIdentifier = WUIE_ID_DEVICE_DISCONNECT; - ie->bDeviceAddress = wusb_dev->addr; - result = wusbhc_mmcie_set(wusbhc, 0, 0, &ie->hdr); - if (result < 0) - dev_err(dev, "DISCONNECT: can't set MMC: %d\n", result); - else { - /* At least 6 MMCs, assuming at least 1 MMC per zone. */ - msleep(7*4); - wusbhc_mmcie_rm(wusbhc, &ie->hdr); - } - kfree(ie); -} - -/* - * Walk over the BOS descriptor, verify and grok it - * - * @usb_dev: referenced - * @wusb_dev: referenced and unlocked - * - * The BOS descriptor is defined at WUSB1.0[7.4.1], and it defines a - * "flexible" way to wrap all kinds of descriptors inside an standard - * descriptor (wonder why they didn't use normal descriptors, - * btw). Not like they lack code. - * - * At the end we go to look for the WUSB Device Capabilities - * (WUSB1.0[7.4.1.1]) that is wrapped in a device capability descriptor - * that is part of the BOS descriptor set. That tells us what does the - * device support (dual role, beacon type, UWB PHY rates). - */ -static int wusb_dev_bos_grok(struct usb_device *usb_dev, - struct wusb_dev *wusb_dev, - struct usb_bos_descriptor *bos, size_t desc_size) -{ - ssize_t result; - struct device *dev = &usb_dev->dev; - void *itr, *top; - - /* Walk over BOS capabilities, verify them */ - itr = (void *)bos + sizeof(*bos); - top = itr + desc_size - sizeof(*bos); - while (itr < top) { - struct usb_dev_cap_header *cap_hdr = itr; - size_t cap_size; - u8 cap_type; - if (top - itr < sizeof(*cap_hdr)) { - dev_err(dev, "Device BUG? premature end of BOS header " - "data [offset 0x%02x]: only %zu bytes left\n", - (int)(itr - (void *)bos), top - itr); - result = -ENOSPC; - goto error_bad_cap; - } - cap_size = cap_hdr->bLength; - cap_type = cap_hdr->bDevCapabilityType; - if (cap_size == 0) - break; - if (cap_size > top - itr) { - dev_err(dev, "Device BUG? premature end of BOS data " - "[offset 0x%02x cap %02x %zu bytes]: " - "only %zu bytes left\n", - (int)(itr - (void *)bos), - cap_type, cap_size, top - itr); - result = -EBADF; - goto error_bad_cap; - } - switch (cap_type) { - case USB_CAP_TYPE_WIRELESS_USB: - if (cap_size != sizeof(*wusb_dev->wusb_cap_descr)) - dev_err(dev, "Device BUG? WUSB Capability " - "descriptor is %zu bytes vs %zu " - "needed\n", cap_size, - sizeof(*wusb_dev->wusb_cap_descr)); - else - wusb_dev->wusb_cap_descr = itr; - break; - default: - dev_err(dev, "BUG? Unknown BOS capability 0x%02x " - "(%zu bytes) at offset 0x%02x\n", cap_type, - cap_size, (int)(itr - (void *)bos)); - } - itr += cap_size; - } - result = 0; -error_bad_cap: - return result; -} - -/* - * Add information from the BOS descriptors to the device - * - * @usb_dev: referenced - * @wusb_dev: referenced and unlocked - * - * So what we do is we alloc a space for the BOS descriptor of 64 - * bytes; read the first four bytes which include the wTotalLength - * field (WUSB1.0[T7-26]) and if it fits in those 64 bytes, read the - * whole thing. If not we realloc to that size. - * - * Then we call the groking function, that will fill up - * wusb_dev->wusb_cap_descr, which is what we'll need later on. - */ -static int wusb_dev_bos_add(struct usb_device *usb_dev, - struct wusb_dev *wusb_dev) -{ - ssize_t result; - struct device *dev = &usb_dev->dev; - struct usb_bos_descriptor *bos; - size_t alloc_size = 32, desc_size = 4; - - bos = kmalloc(alloc_size, GFP_KERNEL); - if (bos == NULL) - return -ENOMEM; - result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size); - if (result < 4) { - dev_err(dev, "Can't get BOS descriptor or too short: %zd\n", - result); - goto error_get_descriptor; - } - desc_size = le16_to_cpu(bos->wTotalLength); - if (desc_size >= alloc_size) { - kfree(bos); - alloc_size = desc_size; - bos = kmalloc(alloc_size, GFP_KERNEL); - if (bos == NULL) - return -ENOMEM; - } - result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size); - if (result < 0 || result != desc_size) { - dev_err(dev, "Can't get BOS descriptor or too short (need " - "%zu bytes): %zd\n", desc_size, result); - goto error_get_descriptor; - } - if (result < sizeof(*bos) - || le16_to_cpu(bos->wTotalLength) != desc_size) { - dev_err(dev, "Can't get BOS descriptor or too short (need " - "%zu bytes): %zd\n", desc_size, result); - goto error_get_descriptor; - } - - result = wusb_dev_bos_grok(usb_dev, wusb_dev, bos, result); - if (result < 0) - goto error_bad_bos; - wusb_dev->bos = bos; - return 0; - -error_bad_bos: -error_get_descriptor: - kfree(bos); - wusb_dev->wusb_cap_descr = NULL; - return result; -} - -static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev) -{ - kfree(wusb_dev->bos); - wusb_dev->wusb_cap_descr = NULL; -}; - -/* - * USB stack's device addition Notifier Callback - * - * Called from drivers/usb/core/hub.c when a new device is added; we - * use this hook to perform certain WUSB specific setup work on the - * new device. As well, it is the first time we can connect the - * wusb_dev and the usb_dev. So we note it down in wusb_dev and take a - * reference that we'll drop. - * - * First we need to determine if the device is a WUSB device (else we - * ignore it). For that we use the speed setting (USB_SPEED_WIRELESS) - * [FIXME: maybe we'd need something more definitive]. If so, we track - * it's usb_busd and from there, the WUSB HC. - * - * Because all WUSB HCs are contained in a 'struct wusbhc', voila, we - * get the wusbhc for the device. - * - * We have a reference on @usb_dev (as we are called at the end of its - * enumeration). - * - * NOTE: @usb_dev locked - */ -static void wusb_dev_add_ncb(struct usb_device *usb_dev) -{ - int result = 0; - struct wusb_dev *wusb_dev; - struct wusbhc *wusbhc; - struct device *dev = &usb_dev->dev; - u8 port_idx; - - if (usb_dev->wusb == 0 || usb_dev->devnum == 1) - return; /* skip non wusb and wusb RHs */ - - usb_set_device_state(usb_dev, USB_STATE_UNAUTHENTICATED); - - wusbhc = wusbhc_get_by_usb_dev(usb_dev); - if (wusbhc == NULL) - goto error_nodev; - mutex_lock(&wusbhc->mutex); - wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev); - port_idx = wusb_port_no_to_idx(usb_dev->portnum); - mutex_unlock(&wusbhc->mutex); - if (wusb_dev == NULL) - goto error_nodev; - wusb_dev->usb_dev = usb_get_dev(usb_dev); - usb_dev->wusb_dev = wusb_dev_get(wusb_dev); - result = wusb_dev_sec_add(wusbhc, usb_dev, wusb_dev); - if (result < 0) { - dev_err(dev, "Cannot enable security: %d\n", result); - goto error_sec_add; - } - /* Now query the device for it's BOS and attach it to wusb_dev */ - result = wusb_dev_bos_add(usb_dev, wusb_dev); - if (result < 0) { - dev_err(dev, "Cannot get BOS descriptors: %d\n", result); - goto error_bos_add; - } - result = wusb_dev_sysfs_add(wusbhc, usb_dev, wusb_dev); - if (result < 0) - goto error_add_sysfs; -out: - wusb_dev_put(wusb_dev); - wusbhc_put(wusbhc); -error_nodev: - return; - -error_add_sysfs: - wusb_dev_bos_rm(wusb_dev); -error_bos_add: - wusb_dev_sec_rm(wusb_dev); -error_sec_add: - mutex_lock(&wusbhc->mutex); - __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); - mutex_unlock(&wusbhc->mutex); - goto out; -} - -/* - * Undo all the steps done at connection by the notifier callback - * - * NOTE: @usb_dev locked - */ -static void wusb_dev_rm_ncb(struct usb_device *usb_dev) -{ - struct wusb_dev *wusb_dev = usb_dev->wusb_dev; - - if (usb_dev->wusb == 0 || usb_dev->devnum == 1) - return; /* skip non wusb and wusb RHs */ - - wusb_dev_sysfs_rm(wusb_dev); - wusb_dev_bos_rm(wusb_dev); - wusb_dev_sec_rm(wusb_dev); - wusb_dev->usb_dev = NULL; - usb_dev->wusb_dev = NULL; - wusb_dev_put(wusb_dev); - usb_put_dev(usb_dev); -} - -/* - * Handle notifications from the USB stack (notifier call back) - * - * This is called when the USB stack does a - * usb_{bus,device}_{add,remove}() so we can do WUSB specific - * handling. It is called with [for the case of - * USB_DEVICE_{ADD,REMOVE} with the usb_dev locked. - */ -int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, - void *priv) -{ - int result = NOTIFY_OK; - - switch (val) { - case USB_DEVICE_ADD: - wusb_dev_add_ncb(priv); - break; - case USB_DEVICE_REMOVE: - wusb_dev_rm_ncb(priv); - break; - case USB_BUS_ADD: - /* ignore (for now) */ - case USB_BUS_REMOVE: - break; - default: - WARN_ON(1); - result = NOTIFY_BAD; - } - return result; -} - -/* - * Return a referenced wusb_dev given a @wusbhc and @usb_dev - */ -struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *wusbhc, - struct usb_device *usb_dev) -{ - struct wusb_dev *wusb_dev; - u8 port_idx; - - port_idx = wusb_port_no_to_idx(usb_dev->portnum); - BUG_ON(port_idx > wusbhc->ports_max); - wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; - if (wusb_dev != NULL) /* ops, device is gone */ - wusb_dev_get(wusb_dev); - return wusb_dev; -} -EXPORT_SYMBOL_GPL(__wusb_dev_get_by_usb_dev); - -void wusb_dev_destroy(struct kref *_wusb_dev) -{ - struct wusb_dev *wusb_dev = container_of(_wusb_dev, struct wusb_dev, refcnt); - - list_del_init(&wusb_dev->cack_node); - wusb_dev_free(wusb_dev); -} -EXPORT_SYMBOL_GPL(wusb_dev_destroy); - -/* - * Create all the device connect handling infrastructure - * - * This is basically the device info array, Connect Acknowledgement - * (cack) lists, keep-alive timers (and delayed work thread). - */ -int wusbhc_devconnect_create(struct wusbhc *wusbhc) -{ - wusbhc->keep_alive_ie.hdr.bIEIdentifier = WUIE_ID_KEEP_ALIVE; - wusbhc->keep_alive_ie.hdr.bLength = sizeof(wusbhc->keep_alive_ie.hdr); - INIT_DELAYED_WORK(&wusbhc->keep_alive_timer, wusbhc_keep_alive_run); - - wusbhc->cack_ie.hdr.bIEIdentifier = WUIE_ID_CONNECTACK; - wusbhc->cack_ie.hdr.bLength = sizeof(wusbhc->cack_ie.hdr); - INIT_LIST_HEAD(&wusbhc->cack_list); - - return 0; -} - -/* - * Release all resources taken by the devconnect stuff - */ -void wusbhc_devconnect_destroy(struct wusbhc *wusbhc) -{ - /* no op */ -} - -/* - * wusbhc_devconnect_start - start accepting device connections - * @wusbhc: the WUSB HC - * - * Sets the Host Info IE to accept all new connections. - * - * FIXME: This also enables the keep alives but this is not necessary - * until there are connected and authenticated devices. - */ -int wusbhc_devconnect_start(struct wusbhc *wusbhc) -{ - struct device *dev = wusbhc->dev; - struct wuie_host_info *hi; - int result; - - hi = kzalloc(sizeof(*hi), GFP_KERNEL); - if (hi == NULL) - return -ENOMEM; - - hi->hdr.bLength = sizeof(*hi); - hi->hdr.bIEIdentifier = WUIE_ID_HOST_INFO; - hi->attributes = cpu_to_le16((wusbhc->rsv->stream << 3) | WUIE_HI_CAP_ALL); - hi->CHID = wusbhc->chid; - result = wusbhc_mmcie_set(wusbhc, 0, 0, &hi->hdr); - if (result < 0) { - dev_err(dev, "Cannot add Host Info MMCIE: %d\n", result); - goto error_mmcie_set; - } - wusbhc->wuie_host_info = hi; - - queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, - msecs_to_jiffies(wusbhc->trust_timeout / 2)); - - return 0; - -error_mmcie_set: - kfree(hi); - return result; -} - -/* - * wusbhc_devconnect_stop - stop managing connected devices - * @wusbhc: the WUSB HC - * - * Disconnects any devices still connected, stops the keep alives and - * removes the Host Info IE. - */ -void wusbhc_devconnect_stop(struct wusbhc *wusbhc) -{ - int i; - - mutex_lock(&wusbhc->mutex); - for (i = 0; i < wusbhc->ports_max; i++) { - if (wusbhc->port[i].wusb_dev) - __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]); - } - mutex_unlock(&wusbhc->mutex); - - cancel_delayed_work_sync(&wusbhc->keep_alive_timer); - wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr); - kfree(wusbhc->wuie_host_info); - wusbhc->wuie_host_info = NULL; -} - -/* - * wusb_set_dev_addr - set the WUSB device address used by the host - * @wusbhc: the WUSB HC the device is connect to - * @wusb_dev: the WUSB device - * @addr: new device address - */ -int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, u8 addr) -{ - int result; - - wusb_dev->addr = addr; - result = wusbhc->dev_info_set(wusbhc, wusb_dev); - if (result < 0) - dev_err(wusbhc->dev, "device %d: failed to set device " - "address\n", wusb_dev->port_idx); - else - dev_info(wusbhc->dev, "device %d: %s addr %u\n", - wusb_dev->port_idx, - (addr & WUSB_DEV_ADDR_UNAUTH) ? "unauth" : "auth", - wusb_dev->addr); - - return result; -} diff --git a/drivers/staging/wusbcore/host/Kconfig b/drivers/staging/wusbcore/host/Kconfig deleted file mode 100644 index 9a73f9360a08..000000000000 --- a/drivers/staging/wusbcore/host/Kconfig +++ /dev/null @@ -1,28 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -config USB_WHCI_HCD - tristate "Wireless USB Host Controller Interface (WHCI) driver" - depends on USB_PCI && USB && UWB - select USB_WUSB - select UWB_WHCI - help - A driver for PCI-based Wireless USB Host Controllers that are - compliant with the WHCI specification. - - To compile this driver a module, choose M here: the module - will be called "whci-hcd". - -config USB_HWA_HCD - tristate "Host Wire Adapter (HWA) driver" - depends on USB && UWB - select USB_WUSB - select UWB_HWA - help - This driver enables you to connect Wireless USB devices to - your system using a Host Wire Adaptor USB dongle. This is an - UWB Radio Controller and WUSB Host Controller connected to - your machine via USB (specified in WUSB1.0). - - To compile this driver a module, choose M here: the module - will be called "hwa-hc". - diff --git a/drivers/staging/wusbcore/host/Makefile b/drivers/staging/wusbcore/host/Makefile deleted file mode 100644 index d65ee8a73e21..000000000000 --- a/drivers/staging/wusbcore/host/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_USB_WHCI_HCD) += whci/ -obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o diff --git a/drivers/staging/wusbcore/host/hwa-hc.c b/drivers/staging/wusbcore/host/hwa-hc.c deleted file mode 100644 index 8d959e91fe27..000000000000 --- a/drivers/staging/wusbcore/host/hwa-hc.c +++ /dev/null @@ -1,875 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Host Wire Adapter: - * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * The HWA driver is a simple layer that forwards requests to the WAHC - * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host - * Controller) layers. - * - * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB - * Host Controller that is connected to your system via USB (a USB - * dongle that implements a USB host...). There is also a Device Wired - * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for - * transferring data (it is after all a USB host connected via - * Wireless USB), we have a common layer called Wire Adapter Host - * Controller that does all the hard work. The WUSBHC (Wireless USB - * Host Controller) is the part common to WUSB Host Controllers, the - * HWA and the PCI-based one, that is implemented following the WHCI - * spec. All these layers are implemented in ../wusbcore. - * - * The main functions are hwahc_op_urb_{en,de}queue(), that pass the - * job of converting a URB to a Wire Adapter - * - * Entry points: - * - * hwahc_driver_*() Driver initialization, registration and - * teardown. - * - * hwahc_probe() New device came up, create an instance for - * it [from device enumeration]. - * - * hwahc_disconnect() Remove device instance [from device - * enumeration]. - * - * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for - * starting/stopping/etc (some might be made also - * DWA). - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/workqueue.h> -#include <linux/wait.h> -#include <linux/completion.h> -#include "../wa-hc.h" -#include "../wusbhc.h" - -struct hwahc { - struct wusbhc wusbhc; /* has to be 1st */ - struct wahc wa; -}; - -/* - * FIXME should be wusbhc - * - * NOTE: we need to cache the Cluster ID because later...there is no - * way to get it :) - */ -static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id) -{ - int result; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct wahc *wa = &hwahc->wa; - struct device *dev = &wa->usb_iface->dev; - - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_CLUSTER_ID, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - cluster_id, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n", - cluster_id, result); - else - wusbhc->cluster_id = cluster_id; - dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id); - return result; -} - -static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_NUM_DNTS, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - interval << 8 | slots, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - -/* - * Reset a WUSB host controller and wait for it to complete doing it. - * - * @usb_hcd: Pointer to WUSB Host Controller instance. - * - */ -static int hwahc_op_reset(struct usb_hcd *usb_hcd) -{ - int result; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct device *dev = &hwahc->wa.usb_iface->dev; - - mutex_lock(&wusbhc->mutex); - wa_nep_disarm(&hwahc->wa); - result = __wa_set_feature(&hwahc->wa, WA_RESET); - if (result < 0) { - dev_err(dev, "error commanding HC to reset: %d\n", result); - goto error_unlock; - } - result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0); - if (result < 0) { - dev_err(dev, "error waiting for HC to reset: %d\n", result); - goto error_unlock; - } -error_unlock: - mutex_unlock(&wusbhc->mutex); - return result; -} - -/* - * FIXME: break this function up - */ -static int hwahc_op_start(struct usb_hcd *usb_hcd) -{ - u8 addr; - int result; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - result = -ENOSPC; - mutex_lock(&wusbhc->mutex); - addr = wusb_cluster_id_get(); - if (addr == 0) - goto error_cluster_id_get; - result = __hwahc_set_cluster_id(hwahc, addr); - if (result < 0) - goto error_set_cluster_id; - - usb_hcd->uses_new_polling = 1; - set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); - usb_hcd->state = HC_STATE_RUNNING; - - /* - * prevent USB core from suspending the root hub since - * bus_suspend and bus_resume are not yet supported. - */ - pm_runtime_get_noresume(&usb_hcd->self.root_hub->dev); - - result = 0; -out: - mutex_unlock(&wusbhc->mutex); - return result; - -error_set_cluster_id: - wusb_cluster_id_put(addr); -error_cluster_id_get: - goto out; - -} - -/* - * No need to abort pipes, as when this is called, all the children - * has been disconnected and that has done it [through - * usb_disable_interface() -> usb_disable_endpoint() -> - * hwahc_op_ep_disable() - >rpipe_ep_disable()]. - */ -static void hwahc_op_stop(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - - mutex_lock(&wusbhc->mutex); - wusb_cluster_id_put(wusbhc->cluster_id); - mutex_unlock(&wusbhc->mutex); -} - -static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - - /* - * We cannot query the HWA for the WUSB time since that requires sending - * a synchronous URB and this function can be called in_interrupt. - * Instead, query the USB frame number for our parent and use that. - */ - return usb_get_current_frame_number(wa->usb_dev); -} - -static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, - gfp_t gfp) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp); -} - -static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, - int status) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - return wa_urb_dequeue(&hwahc->wa, urb, status); -} - -/* - * Release resources allocated for an endpoint - * - * If there is an associated rpipe to this endpoint, go ahead and put it. - */ -static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - rpipe_ep_disable(&hwahc->wa, ep); -} - -static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) -{ - int result; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct device *dev = &hwahc->wa.usb_iface->dev; - - result = __wa_set_feature(&hwahc->wa, WA_ENABLE); - if (result < 0) { - dev_err(dev, "error commanding HC to start: %d\n", result); - goto error_stop; - } - result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE); - if (result < 0) { - dev_err(dev, "error waiting for HC to start: %d\n", result); - goto error_stop; - } - result = wa_nep_arm(&hwahc->wa, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "cannot listen to notifications: %d\n", result); - goto error_stop; - } - /* - * If WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS is set, - * disable transfer notifications. - */ - if (hwahc->wa.quirks & - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS) { - struct usb_host_interface *cur_altsetting = - hwahc->wa.usb_iface->cur_altsetting; - - result = usb_control_msg(hwahc->wa.usb_dev, - usb_sndctrlpipe(hwahc->wa.usb_dev, 0), - WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS, - USB_DIR_OUT | USB_TYPE_VENDOR | - USB_RECIP_INTERFACE, - WA_REQ_ALEREON_FEATURE_SET, - cur_altsetting->desc.bInterfaceNumber, - NULL, 0, - USB_CTRL_SET_TIMEOUT); - /* - * If we successfully sent the control message, start DTI here - * because no transfer notifications will be received which is - * where DTI is normally started. - */ - if (result == 0) - result = wa_dti_start(&hwahc->wa); - else - result = 0; /* OK. Continue normally. */ - - if (result < 0) { - dev_err(dev, "cannot start DTI: %d\n", result); - goto error_dti_start; - } - } - - return result; - -error_dti_start: - wa_nep_disarm(&hwahc->wa); -error_stop: - __wa_clear_feature(&hwahc->wa, WA_ENABLE); - return result; -} - -static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc, int delay) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - int ret; - - ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_CHAN_STOP, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - delay * 1000, - iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (ret == 0) - msleep(delay); - - wa_nep_disarm(&hwahc->wa); - __wa_stop(&hwahc->wa); -} - -/* - * Set the UWB MAS allocation for the WUSB cluster - * - * @stream_index: stream to use (-1 for cancelling the allocation) - * @mas: mas bitmap to use - */ -static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index, - const struct uwb_mas_bm *mas) -{ - int result; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - struct device *dev = &wa->usb_iface->dev; - u8 mas_le[UWB_NUM_MAS/8]; - - /* Set the stream index */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_STREAM_IDX, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - stream_index, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Cannot set WUSB stream index: %d\n", result); - goto out; - } - uwb_mas_bm_copy_le(mas_le, mas); - /* Set the MAS allocation */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_WUSB_MAS, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - mas_le, 32, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result); -out: - return result; -} - -/* - * Add an IE to the host's MMC - * - * @interval: See WUSB1.0[8.5.3.1] - * @repeat_cnt: See WUSB1.0[8.5.3.1] - * @handle: See WUSB1.0[8.5.3.1] - * @wuie: Pointer to the header of the WUSB IE data to add. - * MUST BE allocated in a kmalloc buffer (no stack or - * vmalloc). - * - * NOTE: the format of the WUSB IEs for MMCs are different to the - * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length + - * Id in WUSB IEs). Standards...you gotta love'em. - */ -static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval, - u8 repeat_cnt, u8 handle, - struct wuie_hdr *wuie) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_ADD_MMC_IE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - interval << 8 | repeat_cnt, - handle << 8 | iface_no, - wuie, wuie->bLength, USB_CTRL_SET_TIMEOUT); -} - -/* - * Remove an IE to the host's MMC - * - * @handle: See WUSB1.0[8.5.3.1] - */ -static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_REMOVE_MMC_IE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, handle << 8 | iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - -/* - * Update device information for a given fake port - * - * @port_idx: Fake port to which device is connected (wusbhc index, not - * USB port number). - */ -static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc, - struct wusb_dev *wusb_dev) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - struct hwa_dev_info *dev_info; - int ret; - - /* fill out the Device Info buffer and send it */ - dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL); - if (!dev_info) - return -ENOMEM; - uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability, - &wusb_dev->availability); - dev_info->bDeviceAddress = wusb_dev->addr; - - /* - * If the descriptors haven't been read yet, use a default PHY - * rate of 53.3 Mbit/s only. The correct value will be used - * when this will be called again as part of the - * authentication process (which occurs after the descriptors - * have been read). - */ - if (wusb_dev->wusb_cap_descr) - dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates; - else - dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53); - - ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_DEV_INFO, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wusb_dev->port_idx << 8 | iface_no, - dev_info, sizeof(struct hwa_dev_info), - USB_CTRL_SET_TIMEOUT); - kfree(dev_info); - return ret; -} - -/* - * Set host's idea of which encryption (and key) method to use when - * talking to ad evice on a given port. - * - * If key is NULL, it means disable encryption for that "virtual port" - * (used when we disconnect). - */ -static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *key, size_t key_size, - u8 key_idx) -{ - int result = -ENOMEM; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - struct usb_key_descriptor *keyd; - size_t keyd_len; - - keyd_len = sizeof(*keyd) + key_size; - keyd = kzalloc(keyd_len, GFP_KERNEL); - if (keyd == NULL) - return -ENOMEM; - - keyd->bLength = keyd_len; - keyd->bDescriptorType = USB_DT_KEY; - keyd->tTKID[0] = (tkid >> 0) & 0xff; - keyd->tTKID[1] = (tkid >> 8) & 0xff; - keyd->tTKID[2] = (tkid >> 16) & 0xff; - memcpy(keyd->bKeyData, key, key_size); - - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_DESCRIPTOR, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - USB_DT_KEY << 8 | key_idx, - port_idx << 8 | iface_no, - keyd, keyd_len, USB_CTRL_SET_TIMEOUT); - - kzfree(keyd); /* clear keys etc. */ - return result; -} - -/* - * Set host's idea of which encryption (and key) method to use when - * talking to ad evice on a given port. - * - * If key is NULL, it means disable encryption for that "virtual port" - * (used when we disconnect). - */ -static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *key, size_t key_size) -{ - int result = -ENOMEM; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - u8 encryption_value; - - /* Tell the host which key to use to talk to the device */ - if (key) { - u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK, - WUSB_KEY_INDEX_ORIGINATOR_HOST); - - result = __hwahc_dev_set_key(wusbhc, port_idx, tkid, - key, key_size, key_idx); - if (result < 0) - goto error_set_key; - encryption_value = wusbhc->ccm1_etd->bEncryptionValue; - } else { - /* FIXME: this should come from wusbhc->etd[UNSECURE].value */ - encryption_value = 0; - } - - /* Set the encryption type for communicating with the device */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_ENCRYPTION, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - encryption_value, port_idx << 8 | iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(wusbhc->dev, "Can't set host's WUSB encryption for " - "port index %u to %s (value %d): %d\n", port_idx, - wusb_et_name(wusbhc->ccm1_etd->bEncryptionType), - wusbhc->ccm1_etd->bEncryptionValue, result); -error_set_key: - return result; -} - -/* - * Set host's GTK key - */ -static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *key, size_t key_size) -{ - u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, - WUSB_KEY_INDEX_ORIGINATOR_HOST); - - return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx); -} - -/* - * Get the Wire Adapter class-specific descriptor - * - * NOTE: this descriptor comes with the big bundled configuration - * descriptor that includes the interfaces' and endpoints', so - * we just look for it in the cached copy kept by the USB stack. - * - * NOTE2: We convert LE fields to CPU order. - */ -static int wa_fill_descr(struct wahc *wa) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - char *itr; - struct usb_device *usb_dev = wa->usb_dev; - struct usb_descriptor_header *hdr; - struct usb_wa_descriptor *wa_descr; - size_t itr_size, actconfig_idx; - - actconfig_idx = (usb_dev->actconfig - usb_dev->config) / - sizeof(usb_dev->config[0]); - itr = usb_dev->rawdescriptors[actconfig_idx]; - itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); - while (itr_size >= sizeof(*hdr)) { - hdr = (struct usb_descriptor_header *) itr; - dev_dbg(dev, "Extra device descriptor: " - "type %02x/%u bytes @ %zu (%zu left)\n", - hdr->bDescriptorType, hdr->bLength, - (itr - usb_dev->rawdescriptors[actconfig_idx]), - itr_size); - if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER) - goto found; - itr += hdr->bLength; - itr_size -= hdr->bLength; - } - dev_err(dev, "cannot find Wire Adapter Class descriptor\n"); - return -ENODEV; - -found: - result = -EINVAL; - if (hdr->bLength > itr_size) { /* is it available? */ - dev_err(dev, "incomplete Wire Adapter Class descriptor " - "(%zu bytes left, %u needed)\n", - itr_size, hdr->bLength); - goto error; - } - if (hdr->bLength < sizeof(*wa->wa_descr)) { - dev_err(dev, "short Wire Adapter Class descriptor\n"); - goto error; - } - wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; - if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100) - dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", - (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8, - le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff); - result = 0; -error: - return result; -} - -static const struct hc_driver hwahc_hc_driver = { - .description = "hwa-hcd", - .product_desc = "Wireless USB HWA host controller", - .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd), - .irq = NULL, /* FIXME */ - .flags = HCD_USB25, - .reset = hwahc_op_reset, - .start = hwahc_op_start, - .stop = hwahc_op_stop, - .get_frame_number = hwahc_op_get_frame_number, - .urb_enqueue = hwahc_op_urb_enqueue, - .urb_dequeue = hwahc_op_urb_dequeue, - .endpoint_disable = hwahc_op_endpoint_disable, - - .hub_status_data = wusbhc_rh_status_data, - .hub_control = wusbhc_rh_control, - .start_port_reset = wusbhc_rh_start_port_reset, -}; - -static int hwahc_security_create(struct hwahc *hwahc) -{ - int result; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct usb_device *usb_dev = hwahc->wa.usb_dev; - struct device *dev = &usb_dev->dev; - struct usb_security_descriptor *secd; - struct usb_encryption_descriptor *etd; - void *itr, *top; - size_t itr_size, needed, bytes; - u8 index; - char buf[64]; - - /* Find the host's security descriptors in the config descr bundle */ - index = (usb_dev->actconfig - usb_dev->config) / - sizeof(usb_dev->config[0]); - itr = usb_dev->rawdescriptors[index]; - itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); - top = itr + itr_size; - result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], - le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), - USB_DT_SECURITY, (void **) &secd, sizeof(*secd)); - if (result == -1) { - dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); - return 0; - } - needed = sizeof(*secd); - if (top - (void *)secd < needed) { - dev_err(dev, "BUG? Not enough data to process security " - "descriptor header (%zu bytes left vs %zu needed)\n", - top - (void *) secd, needed); - return 0; - } - needed = le16_to_cpu(secd->wTotalLength); - if (top - (void *)secd < needed) { - dev_err(dev, "BUG? Not enough data to process security " - "descriptors (%zu bytes left vs %zu needed)\n", - top - (void *) secd, needed); - return 0; - } - /* Walk over the sec descriptors and store CCM1's on wusbhc */ - itr = (void *) secd + sizeof(*secd); - top = (void *) secd + le16_to_cpu(secd->wTotalLength); - index = 0; - bytes = 0; - while (itr < top) { - etd = itr; - if (top - itr < sizeof(*etd)) { - dev_err(dev, "BUG: bad host security descriptor; " - "not enough data (%zu vs %zu left)\n", - top - itr, sizeof(*etd)); - break; - } - if (etd->bLength < sizeof(*etd)) { - dev_err(dev, "BUG: bad host encryption descriptor; " - "descriptor is too short " - "(%zu vs %zu needed)\n", - (size_t)etd->bLength, sizeof(*etd)); - break; - } - itr += etd->bLength; - bytes += snprintf(buf + bytes, sizeof(buf) - bytes, - "%s (0x%02x) ", - wusb_et_name(etd->bEncryptionType), - etd->bEncryptionValue); - wusbhc->ccm1_etd = etd; - } - dev_info(dev, "supported encryption types: %s\n", buf); - if (wusbhc->ccm1_etd == NULL) { - dev_err(dev, "E: host doesn't support CCM-1 crypto\n"); - return 0; - } - /* Pretty print what we support */ - return 0; -} - -static void hwahc_security_release(struct hwahc *hwahc) -{ - /* nothing to do here so far... */ -} - -static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface, - kernel_ulong_t quirks) -{ - int result; - struct device *dev = &iface->dev; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct wahc *wa = &hwahc->wa; - struct usb_device *usb_dev = interface_to_usbdev(iface); - - wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ - wa->usb_iface = usb_get_intf(iface); - wusbhc->dev = dev; - /* defer getting the uwb_rc handle until it is needed since it - * may not have been registered by the hwa_rc driver yet. */ - wusbhc->uwb_rc = NULL; - result = wa_fill_descr(wa); /* Get the device descriptor */ - if (result < 0) - goto error_fill_descriptor; - if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) { - dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB " - "adapter (%u ports)\n", wa->wa_descr->bNumPorts); - wusbhc->ports_max = USB_MAXCHILDREN; - } else { - wusbhc->ports_max = wa->wa_descr->bNumPorts; - } - wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs; - wusbhc->start = __hwahc_op_wusbhc_start; - wusbhc->stop = __hwahc_op_wusbhc_stop; - wusbhc->mmcie_add = __hwahc_op_mmcie_add; - wusbhc->mmcie_rm = __hwahc_op_mmcie_rm; - wusbhc->dev_info_set = __hwahc_op_dev_info_set; - wusbhc->bwa_set = __hwahc_op_bwa_set; - wusbhc->set_num_dnts = __hwahc_op_set_num_dnts; - wusbhc->set_ptk = __hwahc_op_set_ptk; - wusbhc->set_gtk = __hwahc_op_set_gtk; - result = hwahc_security_create(hwahc); - if (result < 0) { - dev_err(dev, "Can't initialize security: %d\n", result); - goto error_security_create; - } - wa->wusb = wusbhc; /* FIXME: ugly, need to fix */ - result = wusbhc_create(&hwahc->wusbhc); - if (result < 0) { - dev_err(dev, "Can't create WUSB HC structures: %d\n", result); - goto error_wusbhc_create; - } - result = wa_create(&hwahc->wa, iface, quirks); - if (result < 0) - goto error_wa_create; - return 0; - -error_wa_create: - wusbhc_destroy(&hwahc->wusbhc); -error_wusbhc_create: - /* WA Descr fill allocs no resources */ -error_security_create: -error_fill_descriptor: - usb_put_intf(iface); - usb_put_dev(usb_dev); - return result; -} - -static void hwahc_destroy(struct hwahc *hwahc) -{ - struct wusbhc *wusbhc = &hwahc->wusbhc; - - mutex_lock(&wusbhc->mutex); - __wa_destroy(&hwahc->wa); - wusbhc_destroy(&hwahc->wusbhc); - hwahc_security_release(hwahc); - hwahc->wusbhc.dev = NULL; - uwb_rc_put(wusbhc->uwb_rc); - usb_put_intf(hwahc->wa.usb_iface); - usb_put_dev(hwahc->wa.usb_dev); - mutex_unlock(&wusbhc->mutex); -} - -static void hwahc_init(struct hwahc *hwahc) -{ - wa_init(&hwahc->wa); -} - -static int hwahc_probe(struct usb_interface *usb_iface, - const struct usb_device_id *id) -{ - int result; - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct hwahc *hwahc; - struct device *dev = &usb_iface->dev; - - result = -ENOMEM; - usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa"); - if (usb_hcd == NULL) { - dev_err(dev, "unable to allocate instance\n"); - goto error_alloc; - } - usb_hcd->wireless = 1; - usb_hcd->self.sg_tablesize = ~0; - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - hwahc = container_of(wusbhc, struct hwahc, wusbhc); - hwahc_init(hwahc); - result = hwahc_create(hwahc, usb_iface, id->driver_info); - if (result < 0) { - dev_err(dev, "Cannot initialize internals: %d\n", result); - goto error_hwahc_create; - } - result = usb_add_hcd(usb_hcd, 0, 0); - if (result < 0) { - dev_err(dev, "Cannot add HCD: %d\n", result); - goto error_add_hcd; - } - device_wakeup_enable(usb_hcd->self.controller); - result = wusbhc_b_create(&hwahc->wusbhc); - if (result < 0) { - dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); - goto error_wusbhc_b_create; - } - return 0; - -error_wusbhc_b_create: - usb_remove_hcd(usb_hcd); -error_add_hcd: - hwahc_destroy(hwahc); -error_hwahc_create: - usb_put_hcd(usb_hcd); -error_alloc: - return result; -} - -static void hwahc_disconnect(struct usb_interface *usb_iface) -{ - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct hwahc *hwahc; - - usb_hcd = usb_get_intfdata(usb_iface); - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - wusbhc_b_destroy(&hwahc->wusbhc); - usb_remove_hcd(usb_hcd); - hwahc_destroy(hwahc); - usb_put_hcd(usb_hcd); -} - -static const struct usb_device_id hwahc_id_table[] = { - /* Alereon 5310 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, - /* Alereon 5611 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, - /* FIXME: use class labels for this */ - { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, - {}, -}; -MODULE_DEVICE_TABLE(usb, hwahc_id_table); - -static struct usb_driver hwahc_driver = { - .name = "hwa-hc", - .probe = hwahc_probe, - .disconnect = hwahc_disconnect, - .id_table = hwahc_id_table, -}; - -module_usb_driver(hwahc_driver); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/wusbcore/host/whci/Makefile b/drivers/staging/wusbcore/host/whci/Makefile deleted file mode 100644 index 859d20079df6..000000000000 --- a/drivers/staging/wusbcore/host/whci/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o - -whci-hcd-y := \ - asl.o \ - debug.o \ - hcd.o \ - hw.o \ - init.o \ - int.o \ - pzl.o \ - qset.o \ - wusb.o diff --git a/drivers/staging/wusbcore/host/whci/asl.c b/drivers/staging/wusbcore/host/whci/asl.c deleted file mode 100644 index a2b9a50cfb80..000000000000 --- a/drivers/staging/wusbcore/host/whci/asl.c +++ /dev/null @@ -1,376 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) asynchronous schedule management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> -#include <linux/usb.h> - -#include "../../../uwb/include/umc.h" -#include "../../wusbhc.h" - -#include "whcd.h" - -static void qset_get_next_prev(struct whc *whc, struct whc_qset *qset, - struct whc_qset **next, struct whc_qset **prev) -{ - struct list_head *n, *p; - - BUG_ON(list_empty(&whc->async_list)); - - n = qset->list_node.next; - if (n == &whc->async_list) - n = n->next; - p = qset->list_node.prev; - if (p == &whc->async_list) - p = p->prev; - - *next = container_of(n, struct whc_qset, list_node); - *prev = container_of(p, struct whc_qset, list_node); - -} - -static void asl_qset_insert_begin(struct whc *whc, struct whc_qset *qset) -{ - list_move(&qset->list_node, &whc->async_list); - qset->in_sw_list = true; -} - -static void asl_qset_insert(struct whc *whc, struct whc_qset *qset) -{ - struct whc_qset *next, *prev; - - qset_clear(whc, qset); - - /* Link into ASL. */ - qset_get_next_prev(whc, qset, &next, &prev); - whc_qset_set_link_ptr(&qset->qh.link, next->qset_dma); - whc_qset_set_link_ptr(&prev->qh.link, qset->qset_dma); - qset->in_hw_list = true; -} - -static void asl_qset_remove(struct whc *whc, struct whc_qset *qset) -{ - struct whc_qset *prev, *next; - - qset_get_next_prev(whc, qset, &next, &prev); - - list_move(&qset->list_node, &whc->async_removed_list); - qset->in_sw_list = false; - - /* - * No more qsets in the ASL? The caller must stop the ASL as - * it's no longer valid. - */ - if (list_empty(&whc->async_list)) - return; - - /* Remove from ASL. */ - whc_qset_set_link_ptr(&prev->qh.link, next->qset_dma); - qset->in_hw_list = false; -} - -/** - * process_qset - process any recently inactivated or halted qTDs in a - * qset. - * - * After inactive qTDs are removed, new qTDs can be added if the - * urb queue still contains URBs. - * - * Returns any additional WUSBCMD bits for the ASL sync command (i.e., - * WUSBCMD_ASYNC_QSET_RM if a halted qset was removed). - */ -static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) -{ - enum whc_update update = 0; - uint32_t status = 0; - - while (qset->ntds) { - struct whc_qtd *td; - - td = &qset->qtd[qset->td_start]; - status = le32_to_cpu(td->status); - - /* - * Nothing to do with a still active qTD. - */ - if (status & QTD_STS_ACTIVE) - break; - - if (status & QTD_STS_HALTED) { - /* Ug, an error. */ - process_halted_qtd(whc, qset, td); - /* A halted qTD always triggers an update - because the qset was either removed or - reactivated. */ - update |= WHC_UPDATE_UPDATED; - goto done; - } - - /* Mmm, a completed qTD. */ - process_inactive_qtd(whc, qset, td); - } - - if (!qset->remove) - update |= qset_add_qtds(whc, qset); - -done: - /* - * Remove this qset from the ASL if requested, but only if has - * no qTDs. - */ - if (qset->remove && qset->ntds == 0) { - asl_qset_remove(whc, qset); - update |= WHC_UPDATE_REMOVED; - } - return update; -} - -void asl_start(struct whc *whc) -{ - struct whc_qset *qset; - - qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); - - le_writeq(qset->qset_dma | QH_LINK_NTDS(8), whc->base + WUSBASYNCLISTADDR); - - whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, WUSBCMD_ASYNC_EN); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_ASYNC_SCHED, WUSBSTS_ASYNC_SCHED, - 1000, "start ASL"); -} - -void asl_stop(struct whc *whc) -{ - whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, 0); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_ASYNC_SCHED, 0, - 1000, "stop ASL"); -} - -/** - * asl_update - request an ASL update and wait for the hardware to be synced - * @whc: the WHCI HC - * @wusbcmd: WUSBCMD value to start the update. - * - * If the WUSB HC is inactive (i.e., the ASL is stopped) then the - * update must be skipped as the hardware may not respond to update - * requests. - */ -void asl_update(struct whc *whc, uint32_t wusbcmd) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - long t; - - mutex_lock(&wusbhc->mutex); - if (wusbhc->active) { - whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - t = wait_event_timeout( - whc->async_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0, - msecs_to_jiffies(1000)); - if (t == 0) - whc_hw_error(whc, "ASL update timeout"); - } - mutex_unlock(&wusbhc->mutex); -} - -/** - * scan_async_work - scan the ASL for qsets to process. - * - * Process each qset in the ASL in turn and then signal the WHC that - * the ASL has been updated. - * - * Then start, stop or update the asynchronous schedule as required. - */ -void scan_async_work(struct work_struct *work) -{ - struct whc *whc = container_of(work, struct whc, async_work); - struct whc_qset *qset, *t; - enum whc_update update = 0; - - spin_lock_irq(&whc->lock); - - /* - * Transerve the software list backwards so new qsets can be - * safely inserted into the ASL without making it non-circular. - */ - list_for_each_entry_safe_reverse(qset, t, &whc->async_list, list_node) { - if (!qset->in_hw_list) { - asl_qset_insert(whc, qset); - update |= WHC_UPDATE_ADDED; - } - - update |= process_qset(whc, qset); - } - - spin_unlock_irq(&whc->lock); - - if (update) { - uint32_t wusbcmd = WUSBCMD_ASYNC_UPDATED | WUSBCMD_ASYNC_SYNCED_DB; - if (update & WHC_UPDATE_REMOVED) - wusbcmd |= WUSBCMD_ASYNC_QSET_RM; - asl_update(whc, wusbcmd); - } - - /* - * Now that the ASL is updated, complete the removal of any - * removed qsets. - * - * If the qset was to be reset, do so and reinsert it into the - * ASL if it has pending transfers. - */ - spin_lock_irq(&whc->lock); - - list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { - qset_remove_complete(whc, qset); - if (qset->reset) { - qset_reset(whc, qset); - if (!list_empty(&qset->stds)) { - asl_qset_insert_begin(whc, qset); - queue_work(whc->workqueue, &whc->async_work); - } - } - } - - spin_unlock_irq(&whc->lock); -} - -/** - * asl_urb_enqueue - queue an URB onto the asynchronous list (ASL). - * @whc: the WHCI host controller - * @urb: the URB to enqueue - * @mem_flags: flags for any memory allocations - * - * The qset for the endpoint is obtained and the urb queued on to it. - * - * Work is scheduled to update the hardware's view of the ASL. - */ -int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) -{ - struct whc_qset *qset; - int err; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); - if (err < 0) { - spin_unlock_irqrestore(&whc->lock, flags); - return err; - } - - qset = get_qset(whc, urb, GFP_ATOMIC); - if (qset == NULL) - err = -ENOMEM; - else - err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); - if (!err) { - if (!qset->in_sw_list && !qset->remove) - asl_qset_insert_begin(whc, qset); - } else - usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); - - spin_unlock_irqrestore(&whc->lock, flags); - - if (!err) - queue_work(whc->workqueue, &whc->async_work); - - return err; -} - -/** - * asl_urb_dequeue - remove an URB (qset) from the async list. - * @whc: the WHCI host controller - * @urb: the URB to dequeue - * @status: the current status of the URB - * - * URBs that do yet have qTDs can simply be removed from the software - * queue, otherwise the qset must be removed from the ASL so the qTDs - * can be removed. - */ -int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status) -{ - struct whc_urb *wurb = urb->hcpriv; - struct whc_qset *qset = wurb->qset; - struct whc_std *std, *t; - bool has_qtd = false; - int ret; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); - if (ret < 0) - goto out; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) { - if (std->qtd) - has_qtd = true; - qset_free_std(whc, std); - } else - std->qtd = NULL; /* so this std is re-added when the qset is */ - } - - if (has_qtd) { - asl_qset_remove(whc, qset); - wurb->status = status; - wurb->is_async = true; - queue_work(whc->workqueue, &wurb->dequeue_work); - } else - qset_remove_urb(whc, qset, urb, status); -out: - spin_unlock_irqrestore(&whc->lock, flags); - - return ret; -} - -/** - * asl_qset_delete - delete a qset from the ASL - */ -void asl_qset_delete(struct whc *whc, struct whc_qset *qset) -{ - qset->remove = 1; - queue_work(whc->workqueue, &whc->async_work); - qset_delete(whc, qset); -} - -/** - * asl_init - initialize the asynchronous schedule list - * - * A dummy qset with no qTDs is added to the ASL to simplify removing - * qsets (no need to stop the ASL when the last qset is removed). - */ -int asl_init(struct whc *whc) -{ - struct whc_qset *qset; - - qset = qset_alloc(whc, GFP_KERNEL); - if (qset == NULL) - return -ENOMEM; - - asl_qset_insert_begin(whc, qset); - asl_qset_insert(whc, qset); - - return 0; -} - -/** - * asl_clean_up - free ASL resources - * - * The ASL is stopped and empty except for the dummy qset. - */ -void asl_clean_up(struct whc *whc) -{ - struct whc_qset *qset; - - if (!list_empty(&whc->async_list)) { - qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); - list_del(&qset->list_node); - qset_free(whc, qset); - } -} diff --git a/drivers/staging/wusbcore/host/whci/debug.c b/drivers/staging/wusbcore/host/whci/debug.c deleted file mode 100644 index 443da6719147..000000000000 --- a/drivers/staging/wusbcore/host/whci/debug.c +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) debug. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/export.h> - -#include "../../wusbhc.h" - -#include "whcd.h" - -struct whc_dbg { - struct dentry *di_f; - struct dentry *asl_f; - struct dentry *pzl_f; -}; - -static void qset_print(struct seq_file *s, struct whc_qset *qset) -{ - static const char *qh_type[] = { - "ctrl", "isoc", "bulk", "intr", "rsvd", "rsvd", "rsvd", "lpintr", }; - struct whc_std *std; - struct urb *urb = NULL; - int i; - - seq_printf(s, "qset %08x", (u32)qset->qset_dma); - if (&qset->list_node == qset->whc->async_list.prev) { - seq_printf(s, " (dummy)\n"); - } else { - seq_printf(s, " ep%d%s-%s maxpkt: %d\n", - qset->qh.info1 & 0x0f, - (qset->qh.info1 >> 4) & 0x1 ? "in" : "out", - qh_type[(qset->qh.info1 >> 5) & 0x7], - (qset->qh.info1 >> 16) & 0xffff); - } - seq_printf(s, " -> %08x\n", (u32)qset->qh.link); - seq_printf(s, " info: %08x %08x %08x\n", - qset->qh.info1, qset->qh.info2, qset->qh.info3); - seq_printf(s, " sts: %04x errs: %d curwin: %08x\n", - qset->qh.status, qset->qh.err_count, qset->qh.cur_window); - seq_printf(s, " TD: sts: %08x opts: %08x\n", - qset->qh.overlay.qtd.status, qset->qh.overlay.qtd.options); - - for (i = 0; i < WHCI_QSET_TD_MAX; i++) { - seq_printf(s, " %c%c TD[%d]: sts: %08x opts: %08x ptr: %08x\n", - i == qset->td_start ? 'S' : ' ', - i == qset->td_end ? 'E' : ' ', - i, qset->qtd[i].status, qset->qtd[i].options, - (u32)qset->qtd[i].page_list_ptr); - } - seq_printf(s, " ntds: %d\n", qset->ntds); - list_for_each_entry(std, &qset->stds, list_node) { - if (urb != std->urb) { - urb = std->urb; - seq_printf(s, " urb %p transferred: %d bytes\n", urb, - urb->actual_length); - } - if (std->qtd) - seq_printf(s, " sTD[%td]: %zu bytes @ %08x\n", - std->qtd - &qset->qtd[0], - std->len, std->num_pointers ? - (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); - else - seq_printf(s, " sTD[-]: %zd bytes @ %08x\n", - std->len, std->num_pointers ? - (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); - } -} - -static int di_show(struct seq_file *s, void *p) -{ - struct whc *whc = s->private; - int d; - - for (d = 0; d < whc->n_devices; d++) { - struct di_buf_entry *di = &whc->di_buf[d]; - - seq_printf(s, "DI[%d]\n", d); - seq_printf(s, " availability: %*pb\n", - UWB_NUM_MAS, (unsigned long *)di->availability_info); - seq_printf(s, " %c%c key idx: %d dev addr: %d\n", - (di->addr_sec_info & WHC_DI_SECURE) ? 'S' : ' ', - (di->addr_sec_info & WHC_DI_DISABLE) ? 'D' : ' ', - (di->addr_sec_info & WHC_DI_KEY_IDX_MASK) >> 8, - (di->addr_sec_info & WHC_DI_DEV_ADDR_MASK)); - } - return 0; -} -DEFINE_SHOW_ATTRIBUTE(di); - -static int asl_show(struct seq_file *s, void *p) -{ - struct whc *whc = s->private; - struct whc_qset *qset; - - list_for_each_entry(qset, &whc->async_list, list_node) { - qset_print(s, qset); - } - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(asl); - -static int pzl_show(struct seq_file *s, void *p) -{ - struct whc *whc = s->private; - struct whc_qset *qset; - int period; - - for (period = 0; period < 5; period++) { - seq_printf(s, "Period %d\n", period); - list_for_each_entry(qset, &whc->periodic_list[period], list_node) { - qset_print(s, qset); - } - } - return 0; -} -DEFINE_SHOW_ATTRIBUTE(pzl); - -void whc_dbg_init(struct whc *whc) -{ - if (whc->wusbhc.pal.debugfs_dir == NULL) - return; - - whc->dbg = kzalloc(sizeof(struct whc_dbg), GFP_KERNEL); - if (whc->dbg == NULL) - return; - - whc->dbg->di_f = debugfs_create_file("di", 0444, - whc->wusbhc.pal.debugfs_dir, whc, - &di_fops); - whc->dbg->asl_f = debugfs_create_file("asl", 0444, - whc->wusbhc.pal.debugfs_dir, whc, - &asl_fops); - whc->dbg->pzl_f = debugfs_create_file("pzl", 0444, - whc->wusbhc.pal.debugfs_dir, whc, - &pzl_fops); -} - -void whc_dbg_clean_up(struct whc *whc) -{ - if (whc->dbg) { - debugfs_remove(whc->dbg->pzl_f); - debugfs_remove(whc->dbg->asl_f); - debugfs_remove(whc->dbg->di_f); - kfree(whc->dbg); - } -} diff --git a/drivers/staging/wusbcore/host/whci/hcd.c b/drivers/staging/wusbcore/host/whci/hcd.c deleted file mode 100644 index bee1ff2d35be..000000000000 --- a/drivers/staging/wusbcore/host/whci/hcd.c +++ /dev/null @@ -1,356 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) driver. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> - -#include "../../../uwb/include/umc.h" -#include "../../wusbhc.h" - -#include "whcd.h" - -/* - * One time initialization. - * - * Nothing to do here. - */ -static int whc_reset(struct usb_hcd *usb_hcd) -{ - return 0; -} - -/* - * Start the wireless host controller. - * - * Start device notification. - * - * Put hc into run state, set DNTS parameters. - */ -static int whc_start(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - u8 bcid; - int ret; - - mutex_lock(&wusbhc->mutex); - - le_writel(WUSBINTR_GEN_CMD_DONE - | WUSBINTR_HOST_ERR - | WUSBINTR_ASYNC_SCHED_SYNCED - | WUSBINTR_DNTS_INT - | WUSBINTR_ERR_INT - | WUSBINTR_INT, - whc->base + WUSBINTR); - - /* set cluster ID */ - bcid = wusb_cluster_id_get(); - ret = whc_set_cluster_id(whc, bcid); - if (ret < 0) - goto out; - wusbhc->cluster_id = bcid; - - /* start HC */ - whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); - - usb_hcd->uses_new_polling = 1; - set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); - usb_hcd->state = HC_STATE_RUNNING; - -out: - mutex_unlock(&wusbhc->mutex); - return ret; -} - - -/* - * Stop the wireless host controller. - * - * Stop device notification. - * - * Wait for pending transfer to stop? Put hc into stop state? - */ -static void whc_stop(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - - mutex_lock(&wusbhc->mutex); - - /* stop HC */ - le_writel(0, whc->base + WUSBINTR); - whc_write_wusbcmd(whc, WUSBCMD_RUN, 0); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_HCHALTED, WUSBSTS_HCHALTED, - 100, "HC to halt"); - - wusb_cluster_id_put(wusbhc->cluster_id); - - mutex_unlock(&wusbhc->mutex); -} - -static int whc_get_frame_number(struct usb_hcd *usb_hcd) -{ - /* Frame numbers are not applicable to WUSB. */ - return -ENOSYS; -} - - -/* - * Queue an URB to the ASL or PZL - */ -static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, - gfp_t mem_flags) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - int ret; - - switch (usb_pipetype(urb->pipe)) { - case PIPE_INTERRUPT: - ret = pzl_urb_enqueue(whc, urb, mem_flags); - break; - case PIPE_ISOCHRONOUS: - dev_err(&whc->umc->dev, "isochronous transfers unsupported\n"); - ret = -ENOTSUPP; - break; - case PIPE_CONTROL: - case PIPE_BULK: - default: - ret = asl_urb_enqueue(whc, urb, mem_flags); - break; - } - - return ret; -} - -/* - * Remove a queued URB from the ASL or PZL. - */ -static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - int ret; - - switch (usb_pipetype(urb->pipe)) { - case PIPE_INTERRUPT: - ret = pzl_urb_dequeue(whc, urb, status); - break; - case PIPE_ISOCHRONOUS: - ret = -ENOTSUPP; - break; - case PIPE_CONTROL: - case PIPE_BULK: - default: - ret = asl_urb_dequeue(whc, urb, status); - break; - } - - return ret; -} - -/* - * Wait for all URBs to the endpoint to be completed, then delete the - * qset. - */ -static void whc_endpoint_disable(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - struct whc_qset *qset; - - qset = ep->hcpriv; - if (qset) { - ep->hcpriv = NULL; - if (usb_endpoint_xfer_bulk(&ep->desc) - || usb_endpoint_xfer_control(&ep->desc)) - asl_qset_delete(whc, qset); - else - pzl_qset_delete(whc, qset); - } -} - -static void whc_endpoint_reset(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - struct whc_qset *qset; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - qset = ep->hcpriv; - if (qset) { - qset->remove = 1; - qset->reset = 1; - - if (usb_endpoint_xfer_bulk(&ep->desc) - || usb_endpoint_xfer_control(&ep->desc)) - queue_work(whc->workqueue, &whc->async_work); - else - queue_work(whc->workqueue, &whc->periodic_work); - } - - spin_unlock_irqrestore(&whc->lock, flags); -} - - -static const struct hc_driver whc_hc_driver = { - .description = "whci-hcd", - .product_desc = "Wireless host controller", - .hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd), - .irq = whc_int_handler, - .flags = HCD_USB2, - - .reset = whc_reset, - .start = whc_start, - .stop = whc_stop, - .get_frame_number = whc_get_frame_number, - .urb_enqueue = whc_urb_enqueue, - .urb_dequeue = whc_urb_dequeue, - .endpoint_disable = whc_endpoint_disable, - .endpoint_reset = whc_endpoint_reset, - - .hub_status_data = wusbhc_rh_status_data, - .hub_control = wusbhc_rh_control, - .start_port_reset = wusbhc_rh_start_port_reset, -}; - -static int whc_probe(struct umc_dev *umc) -{ - int ret; - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct whc *whc; - struct device *dev = &umc->dev; - - usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); - if (usb_hcd == NULL) { - dev_err(dev, "unable to create hcd\n"); - return -ENOMEM; - } - - usb_hcd->wireless = 1; - usb_hcd->self.sg_tablesize = 2048; /* somewhat arbitrary */ - - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - whc = wusbhc_to_whc(wusbhc); - whc->umc = umc; - - ret = whc_init(whc); - if (ret) - goto error_whc_init; - - wusbhc->dev = dev; - wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent); - if (!wusbhc->uwb_rc) { - ret = -ENODEV; - dev_err(dev, "cannot get radio controller\n"); - goto error_uwb_rc; - } - - if (whc->n_devices > USB_MAXCHILDREN) { - dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n", - whc->n_devices); - wusbhc->ports_max = USB_MAXCHILDREN; - } else - wusbhc->ports_max = whc->n_devices; - wusbhc->mmcies_max = whc->n_mmc_ies; - wusbhc->start = whc_wusbhc_start; - wusbhc->stop = whc_wusbhc_stop; - wusbhc->mmcie_add = whc_mmcie_add; - wusbhc->mmcie_rm = whc_mmcie_rm; - wusbhc->dev_info_set = whc_dev_info_set; - wusbhc->bwa_set = whc_bwa_set; - wusbhc->set_num_dnts = whc_set_num_dnts; - wusbhc->set_ptk = whc_set_ptk; - wusbhc->set_gtk = whc_set_gtk; - - ret = wusbhc_create(wusbhc); - if (ret) - goto error_wusbhc_create; - - ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "cannot add HCD: %d\n", ret); - goto error_usb_add_hcd; - } - device_wakeup_enable(usb_hcd->self.controller); - - ret = wusbhc_b_create(wusbhc); - if (ret) { - dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret); - goto error_wusbhc_b_create; - } - - whc_dbg_init(whc); - - return 0; - -error_wusbhc_b_create: - usb_remove_hcd(usb_hcd); -error_usb_add_hcd: - wusbhc_destroy(wusbhc); -error_wusbhc_create: - uwb_rc_put(wusbhc->uwb_rc); -error_uwb_rc: - whc_clean_up(whc); -error_whc_init: - usb_put_hcd(usb_hcd); - return ret; -} - - -static void whc_remove(struct umc_dev *umc) -{ - struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev); - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - - if (usb_hcd) { - whc_dbg_clean_up(whc); - wusbhc_b_destroy(wusbhc); - usb_remove_hcd(usb_hcd); - wusbhc_destroy(wusbhc); - uwb_rc_put(wusbhc->uwb_rc); - whc_clean_up(whc); - usb_put_hcd(usb_hcd); - } -} - -static struct umc_driver whci_hc_driver = { - .name = "whci-hcd", - .cap_id = UMC_CAP_ID_WHCI_WUSB_HC, - .probe = whc_probe, - .remove = whc_remove, -}; - -static int __init whci_hc_driver_init(void) -{ - return umc_driver_register(&whci_hc_driver); -} -module_init(whci_hc_driver_init); - -static void __exit whci_hc_driver_exit(void) -{ - umc_driver_unregister(&whci_hc_driver); -} -module_exit(whci_hc_driver_exit); - -/* PCI device ID's that we handle (so it gets loaded) */ -static struct pci_device_id __used whci_hcd_id_table[] = { - { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, - { /* empty last entry */ } -}; -MODULE_DEVICE_TABLE(pci, whci_hcd_id_table); - -MODULE_DESCRIPTION("WHCI Wireless USB host controller driver"); -MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/wusbcore/host/whci/hw.c b/drivers/staging/wusbcore/host/whci/hw.c deleted file mode 100644 index e4e8914abf42..000000000000 --- a/drivers/staging/wusbcore/host/whci/hw.c +++ /dev/null @@ -1,93 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) hardware access helpers. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/dma-mapping.h> - -#include "../../../uwb/include/umc.h" -#include "../../wusbhc.h" - -#include "whcd.h" - -void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val) -{ - unsigned long flags; - u32 cmd; - - spin_lock_irqsave(&whc->lock, flags); - - cmd = le_readl(whc->base + WUSBCMD); - cmd = (cmd & ~mask) | val; - le_writel(cmd, whc->base + WUSBCMD); - - spin_unlock_irqrestore(&whc->lock, flags); -} - -/** - * whc_do_gencmd - start a generic command via the WUSBGENCMDSTS register - * @whc: the WHCI HC - * @cmd: command to start. - * @params: parameters for the command (the WUSBGENCMDPARAMS register value). - * @addr: pointer to any data for the command (may be NULL). - * @len: length of the data (if any). - */ -int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len) -{ - unsigned long flags; - dma_addr_t dma_addr; - int t; - int ret = 0; - - mutex_lock(&whc->mutex); - - /* Wait for previous command to complete. */ - t = wait_event_timeout(whc->cmd_wq, - (le_readl(whc->base + WUSBGENCMDSTS) & WUSBGENCMDSTS_ACTIVE) == 0, - WHC_GENCMD_TIMEOUT_MS); - if (t == 0) { - dev_err(&whc->umc->dev, "generic command timeout (%04x/%04x)\n", - le_readl(whc->base + WUSBGENCMDSTS), - le_readl(whc->base + WUSBGENCMDPARAMS)); - ret = -ETIMEDOUT; - goto out; - } - - if (addr) { - memcpy(whc->gen_cmd_buf, addr, len); - dma_addr = whc->gen_cmd_buf_dma; - } else - dma_addr = 0; - - /* Poke registers to start cmd. */ - spin_lock_irqsave(&whc->lock, flags); - - le_writel(params, whc->base + WUSBGENCMDPARAMS); - le_writeq(dma_addr, whc->base + WUSBGENADDR); - - le_writel(WUSBGENCMDSTS_ACTIVE | WUSBGENCMDSTS_IOC | cmd, - whc->base + WUSBGENCMDSTS); - - spin_unlock_irqrestore(&whc->lock, flags); -out: - mutex_unlock(&whc->mutex); - - return ret; -} - -/** - * whc_hw_error - recover from a hardware error - * @whc: the WHCI HC that broke. - * @reason: a description of the failure. - * - * Recover from broken hardware with a full reset. - */ -void whc_hw_error(struct whc *whc, const char *reason) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - - dev_err(&whc->umc->dev, "hardware error: %s\n", reason); - wusbhc_reset_all(wusbhc); -} diff --git a/drivers/staging/wusbcore/host/whci/init.c b/drivers/staging/wusbcore/host/whci/init.c deleted file mode 100644 index 55fd458a8f30..000000000000 --- a/drivers/staging/wusbcore/host/whci/init.c +++ /dev/null @@ -1,177 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) initialization. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> - -#include "../../../uwb/include/umc.h" -#include "../../wusbhc.h" - -#include "whcd.h" - -/* - * Reset the host controller. - */ -static void whc_hw_reset(struct whc *whc) -{ - le_writel(WUSBCMD_WHCRESET, whc->base + WUSBCMD); - whci_wait_for(&whc->umc->dev, whc->base + WUSBCMD, WUSBCMD_WHCRESET, 0, - 100, "reset"); -} - -static void whc_hw_init_di_buf(struct whc *whc) -{ - int d; - - /* Disable all entries in the Device Information buffer. */ - for (d = 0; d < whc->n_devices; d++) - whc->di_buf[d].addr_sec_info = WHC_DI_DISABLE; - - le_writeq(whc->di_buf_dma, whc->base + WUSBDEVICEINFOADDR); -} - -static void whc_hw_init_dn_buf(struct whc *whc) -{ - /* Clear the Device Notification buffer to ensure the V (valid) - * bits are clear. */ - memset(whc->dn_buf, 0, 4096); - - le_writeq(whc->dn_buf_dma, whc->base + WUSBDNTSBUFADDR); -} - -int whc_init(struct whc *whc) -{ - u32 whcsparams; - int ret, i; - resource_size_t start, len; - - spin_lock_init(&whc->lock); - mutex_init(&whc->mutex); - init_waitqueue_head(&whc->cmd_wq); - init_waitqueue_head(&whc->async_list_wq); - init_waitqueue_head(&whc->periodic_list_wq); - whc->workqueue = alloc_ordered_workqueue(dev_name(&whc->umc->dev), 0); - if (whc->workqueue == NULL) { - ret = -ENOMEM; - goto error; - } - INIT_WORK(&whc->dn_work, whc_dn_work); - - INIT_WORK(&whc->async_work, scan_async_work); - INIT_LIST_HEAD(&whc->async_list); - INIT_LIST_HEAD(&whc->async_removed_list); - - INIT_WORK(&whc->periodic_work, scan_periodic_work); - for (i = 0; i < 5; i++) - INIT_LIST_HEAD(&whc->periodic_list[i]); - INIT_LIST_HEAD(&whc->periodic_removed_list); - - /* Map HC registers. */ - start = whc->umc->resource.start; - len = whc->umc->resource.end - start + 1; - if (!request_mem_region(start, len, "whci-hc")) { - dev_err(&whc->umc->dev, "can't request HC region\n"); - ret = -EBUSY; - goto error; - } - whc->base_phys = start; - whc->base = ioremap(start, len); - if (!whc->base) { - dev_err(&whc->umc->dev, "ioremap\n"); - ret = -ENOMEM; - goto error; - } - - whc_hw_reset(whc); - - /* Read maximum number of devices, keys and MMC IEs. */ - whcsparams = le_readl(whc->base + WHCSPARAMS); - whc->n_devices = WHCSPARAMS_TO_N_DEVICES(whcsparams); - whc->n_keys = WHCSPARAMS_TO_N_KEYS(whcsparams); - whc->n_mmc_ies = WHCSPARAMS_TO_N_MMC_IES(whcsparams); - - dev_dbg(&whc->umc->dev, "N_DEVICES = %d, N_KEYS = %d, N_MMC_IES = %d\n", - whc->n_devices, whc->n_keys, whc->n_mmc_ies); - - whc->qset_pool = dma_pool_create("qset", &whc->umc->dev, - sizeof(struct whc_qset), 64, 0); - if (whc->qset_pool == NULL) { - ret = -ENOMEM; - goto error; - } - - ret = asl_init(whc); - if (ret < 0) - goto error; - ret = pzl_init(whc); - if (ret < 0) - goto error; - - /* Allocate and initialize a buffer for generic commands, the - Device Information buffer, and the Device Notification - buffer. */ - - whc->gen_cmd_buf = dma_alloc_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, - &whc->gen_cmd_buf_dma, GFP_KERNEL); - if (whc->gen_cmd_buf == NULL) { - ret = -ENOMEM; - goto error; - } - - whc->dn_buf = dma_alloc_coherent(&whc->umc->dev, - sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, - &whc->dn_buf_dma, GFP_KERNEL); - if (!whc->dn_buf) { - ret = -ENOMEM; - goto error; - } - whc_hw_init_dn_buf(whc); - - whc->di_buf = dma_alloc_coherent(&whc->umc->dev, - sizeof(struct di_buf_entry) * whc->n_devices, - &whc->di_buf_dma, GFP_KERNEL); - if (!whc->di_buf) { - ret = -ENOMEM; - goto error; - } - whc_hw_init_di_buf(whc); - - return 0; - -error: - whc_clean_up(whc); - return ret; -} - -void whc_clean_up(struct whc *whc) -{ - resource_size_t len; - - if (whc->di_buf) - dma_free_coherent(&whc->umc->dev, sizeof(struct di_buf_entry) * whc->n_devices, - whc->di_buf, whc->di_buf_dma); - if (whc->dn_buf) - dma_free_coherent(&whc->umc->dev, sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, - whc->dn_buf, whc->dn_buf_dma); - if (whc->gen_cmd_buf) - dma_free_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, - whc->gen_cmd_buf, whc->gen_cmd_buf_dma); - - pzl_clean_up(whc); - asl_clean_up(whc); - - dma_pool_destroy(whc->qset_pool); - - len = resource_size(&whc->umc->resource); - if (whc->base) - iounmap(whc->base); - if (whc->base_phys) - release_mem_region(whc->base_phys, len); - - if (whc->workqueue) - destroy_workqueue(whc->workqueue); -} diff --git a/drivers/staging/wusbcore/host/whci/int.c b/drivers/staging/wusbcore/host/whci/int.c deleted file mode 100644 index bdbe35e9366f..000000000000 --- a/drivers/staging/wusbcore/host/whci/int.c +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) interrupt handling. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> - -#include "../../../uwb/include/umc.h" -#include "../../wusbhc.h" - -#include "whcd.h" - -static void transfer_done(struct whc *whc) -{ - queue_work(whc->workqueue, &whc->async_work); - queue_work(whc->workqueue, &whc->periodic_work); -} - -irqreturn_t whc_int_handler(struct usb_hcd *hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 sts; - - sts = le_readl(whc->base + WUSBSTS); - if (!(sts & WUSBSTS_INT_MASK)) - return IRQ_NONE; - le_writel(sts & WUSBSTS_INT_MASK, whc->base + WUSBSTS); - - if (sts & WUSBSTS_GEN_CMD_DONE) - wake_up(&whc->cmd_wq); - - if (sts & WUSBSTS_HOST_ERR) - dev_err(&whc->umc->dev, "FIXME: host system error\n"); - - if (sts & WUSBSTS_ASYNC_SCHED_SYNCED) - wake_up(&whc->async_list_wq); - - if (sts & WUSBSTS_PERIODIC_SCHED_SYNCED) - wake_up(&whc->periodic_list_wq); - - if (sts & WUSBSTS_DNTS_INT) - queue_work(whc->workqueue, &whc->dn_work); - - /* - * A transfer completed (see [WHCI] section 4.7.1.2 for when - * this occurs). - */ - if (sts & (WUSBSTS_INT | WUSBSTS_ERR_INT)) - transfer_done(whc); - - return IRQ_HANDLED; -} - -static int process_dn_buf(struct whc *whc) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - struct dn_buf_entry *dn; - int processed = 0; - - for (dn = whc->dn_buf; dn < whc->dn_buf + WHC_N_DN_ENTRIES; dn++) { - if (dn->status & WHC_DN_STATUS_VALID) { - wusbhc_handle_dn(wusbhc, dn->src_addr, - (struct wusb_dn_hdr *)dn->dn_data, - dn->msg_size); - dn->status &= ~WHC_DN_STATUS_VALID; - processed++; - } - } - return processed; -} - -void whc_dn_work(struct work_struct *work) -{ - struct whc *whc = container_of(work, struct whc, dn_work); - int processed; - - do { - processed = process_dn_buf(whc); - } while (processed); -} diff --git a/drivers/staging/wusbcore/host/whci/pzl.c b/drivers/staging/wusbcore/host/whci/pzl.c deleted file mode 100644 index 6dfc075f5798..000000000000 --- a/drivers/staging/wusbcore/host/whci/pzl.c +++ /dev/null @@ -1,404 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) periodic schedule management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> -#include <linux/usb.h> - -#include "../../../uwb/include/umc.h" -#include "../../wusbhc.h" - -#include "whcd.h" - -static void update_pzl_pointers(struct whc *whc, int period, u64 addr) -{ - switch (period) { - case 0: - whc_qset_set_link_ptr(&whc->pz_list[0], addr); - whc_qset_set_link_ptr(&whc->pz_list[2], addr); - whc_qset_set_link_ptr(&whc->pz_list[4], addr); - whc_qset_set_link_ptr(&whc->pz_list[6], addr); - whc_qset_set_link_ptr(&whc->pz_list[8], addr); - whc_qset_set_link_ptr(&whc->pz_list[10], addr); - whc_qset_set_link_ptr(&whc->pz_list[12], addr); - whc_qset_set_link_ptr(&whc->pz_list[14], addr); - break; - case 1: - whc_qset_set_link_ptr(&whc->pz_list[1], addr); - whc_qset_set_link_ptr(&whc->pz_list[5], addr); - whc_qset_set_link_ptr(&whc->pz_list[9], addr); - whc_qset_set_link_ptr(&whc->pz_list[13], addr); - break; - case 2: - whc_qset_set_link_ptr(&whc->pz_list[3], addr); - whc_qset_set_link_ptr(&whc->pz_list[11], addr); - break; - case 3: - whc_qset_set_link_ptr(&whc->pz_list[7], addr); - break; - case 4: - whc_qset_set_link_ptr(&whc->pz_list[15], addr); - break; - } -} - -/* - * Return the 'period' to use for this qset. The minimum interval for - * the endpoint is used so whatever urbs are submitted the device is - * polled often enough. - */ -static int qset_get_period(struct whc *whc, struct whc_qset *qset) -{ - uint8_t bInterval = qset->ep->desc.bInterval; - - if (bInterval < 6) - bInterval = 6; - if (bInterval > 10) - bInterval = 10; - return bInterval - 6; -} - -static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset) -{ - int period; - - period = qset_get_period(whc, qset); - - qset_clear(whc, qset); - list_move(&qset->list_node, &whc->periodic_list[period]); - qset->in_sw_list = true; -} - -static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset) -{ - list_move(&qset->list_node, &whc->periodic_removed_list); - qset->in_hw_list = false; - qset->in_sw_list = false; -} - -/** - * pzl_process_qset - process any recently inactivated or halted qTDs - * in a qset. - * - * After inactive qTDs are removed, new qTDs can be added if the - * urb queue still contains URBs. - * - * Returns the schedule updates required. - */ -static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) -{ - enum whc_update update = 0; - uint32_t status = 0; - - while (qset->ntds) { - struct whc_qtd *td; - - td = &qset->qtd[qset->td_start]; - status = le32_to_cpu(td->status); - - /* - * Nothing to do with a still active qTD. - */ - if (status & QTD_STS_ACTIVE) - break; - - if (status & QTD_STS_HALTED) { - /* Ug, an error. */ - process_halted_qtd(whc, qset, td); - /* A halted qTD always triggers an update - because the qset was either removed or - reactivated. */ - update |= WHC_UPDATE_UPDATED; - goto done; - } - - /* Mmm, a completed qTD. */ - process_inactive_qtd(whc, qset, td); - } - - if (!qset->remove) - update |= qset_add_qtds(whc, qset); - -done: - /* - * If there are no qTDs in this qset, remove it from the PZL. - */ - if (qset->remove && qset->ntds == 0) { - pzl_qset_remove(whc, qset); - update |= WHC_UPDATE_REMOVED; - } - - return update; -} - -/** - * pzl_start - start the periodic schedule - * @whc: the WHCI host controller - * - * The PZL must be valid (e.g., all entries in the list should have - * the T bit set). - */ -void pzl_start(struct whc *whc) -{ - le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); - - whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED, - 1000, "start PZL"); -} - -/** - * pzl_stop - stop the periodic schedule - * @whc: the WHCI host controller - */ -void pzl_stop(struct whc *whc) -{ - whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_PERIODIC_SCHED, 0, - 1000, "stop PZL"); -} - -/** - * pzl_update - request a PZL update and wait for the hardware to be synced - * @whc: the WHCI HC - * @wusbcmd: WUSBCMD value to start the update. - * - * If the WUSB HC is inactive (i.e., the PZL is stopped) then the - * update must be skipped as the hardware may not respond to update - * requests. - */ -void pzl_update(struct whc *whc, uint32_t wusbcmd) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - long t; - - mutex_lock(&wusbhc->mutex); - if (wusbhc->active) { - whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - t = wait_event_timeout( - whc->periodic_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, - msecs_to_jiffies(1000)); - if (t == 0) - whc_hw_error(whc, "PZL update timeout"); - } - mutex_unlock(&wusbhc->mutex); -} - -static void update_pzl_hw_view(struct whc *whc) -{ - struct whc_qset *qset, *t; - int period; - u64 tmp_qh = 0; - - for (period = 0; period < 5; period++) { - list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { - whc_qset_set_link_ptr(&qset->qh.link, tmp_qh); - tmp_qh = qset->qset_dma; - qset->in_hw_list = true; - } - update_pzl_pointers(whc, period, tmp_qh); - } -} - -/** - * scan_periodic_work - scan the PZL for qsets to process. - * - * Process each qset in the PZL in turn and then signal the WHC that - * the PZL has been updated. - * - * Then start, stop or update the periodic schedule as required. - */ -void scan_periodic_work(struct work_struct *work) -{ - struct whc *whc = container_of(work, struct whc, periodic_work); - struct whc_qset *qset, *t; - enum whc_update update = 0; - int period; - - spin_lock_irq(&whc->lock); - - for (period = 4; period >= 0; period--) { - list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { - if (!qset->in_hw_list) - update |= WHC_UPDATE_ADDED; - update |= pzl_process_qset(whc, qset); - } - } - - if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED)) - update_pzl_hw_view(whc); - - spin_unlock_irq(&whc->lock); - - if (update) { - uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB; - if (update & WHC_UPDATE_REMOVED) - wusbcmd |= WUSBCMD_PERIODIC_QSET_RM; - pzl_update(whc, wusbcmd); - } - - /* - * Now that the PZL is updated, complete the removal of any - * removed qsets. - * - * If the qset was to be reset, do so and reinsert it into the - * PZL if it has pending transfers. - */ - spin_lock_irq(&whc->lock); - - list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { - qset_remove_complete(whc, qset); - if (qset->reset) { - qset_reset(whc, qset); - if (!list_empty(&qset->stds)) { - qset_insert_in_sw_list(whc, qset); - queue_work(whc->workqueue, &whc->periodic_work); - } - } - } - - spin_unlock_irq(&whc->lock); -} - -/** - * pzl_urb_enqueue - queue an URB onto the periodic list (PZL) - * @whc: the WHCI host controller - * @urb: the URB to enqueue - * @mem_flags: flags for any memory allocations - * - * The qset for the endpoint is obtained and the urb queued on to it. - * - * Work is scheduled to update the hardware's view of the PZL. - */ -int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) -{ - struct whc_qset *qset; - int err; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); - if (err < 0) { - spin_unlock_irqrestore(&whc->lock, flags); - return err; - } - - qset = get_qset(whc, urb, GFP_ATOMIC); - if (qset == NULL) - err = -ENOMEM; - else - err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); - if (!err) { - if (!qset->in_sw_list && !qset->remove) - qset_insert_in_sw_list(whc, qset); - } else - usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); - - spin_unlock_irqrestore(&whc->lock, flags); - - if (!err) - queue_work(whc->workqueue, &whc->periodic_work); - - return err; -} - -/** - * pzl_urb_dequeue - remove an URB (qset) from the periodic list - * @whc: the WHCI host controller - * @urb: the URB to dequeue - * @status: the current status of the URB - * - * URBs that do yet have qTDs can simply be removed from the software - * queue, otherwise the qset must be removed so the qTDs can be safely - * removed. - */ -int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status) -{ - struct whc_urb *wurb = urb->hcpriv; - struct whc_qset *qset = wurb->qset; - struct whc_std *std, *t; - bool has_qtd = false; - int ret; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); - if (ret < 0) - goto out; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) { - if (std->qtd) - has_qtd = true; - qset_free_std(whc, std); - } else - std->qtd = NULL; /* so this std is re-added when the qset is */ - } - - if (has_qtd) { - pzl_qset_remove(whc, qset); - update_pzl_hw_view(whc); - wurb->status = status; - wurb->is_async = false; - queue_work(whc->workqueue, &wurb->dequeue_work); - } else - qset_remove_urb(whc, qset, urb, status); -out: - spin_unlock_irqrestore(&whc->lock, flags); - - return ret; -} - -/** - * pzl_qset_delete - delete a qset from the PZL - */ -void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) -{ - qset->remove = 1; - queue_work(whc->workqueue, &whc->periodic_work); - qset_delete(whc, qset); -} - -/** - * pzl_init - initialize the periodic zone list - * @whc: the WHCI host controller - */ -int pzl_init(struct whc *whc) -{ - int i; - - whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16, - &whc->pz_list_dma, GFP_KERNEL); - if (whc->pz_list == NULL) - return -ENOMEM; - - /* Set T bit on all elements in PZL. */ - for (i = 0; i < 16; i++) - whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); - - le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); - - return 0; -} - -/** - * pzl_clean_up - free PZL resources - * @whc: the WHCI host controller - * - * The PZL is stopped and empty. - */ -void pzl_clean_up(struct whc *whc) -{ - if (whc->pz_list) - dma_free_coherent(&whc->umc->dev, sizeof(u64) * 16, whc->pz_list, - whc->pz_list_dma); -} diff --git a/drivers/staging/wusbcore/host/whci/qset.c b/drivers/staging/wusbcore/host/whci/qset.c deleted file mode 100644 index 66459b77dc77..000000000000 --- a/drivers/staging/wusbcore/host/whci/qset.c +++ /dev/null @@ -1,831 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) qset management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/slab.h> -#include <linux/usb.h> - -#include "../../../uwb/include/umc.h" -#include "../../wusbhc.h" - -#include "whcd.h" - -struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags) -{ - struct whc_qset *qset; - dma_addr_t dma; - - qset = dma_pool_zalloc(whc->qset_pool, mem_flags, &dma); - if (qset == NULL) - return NULL; - - qset->qset_dma = dma; - qset->whc = whc; - - INIT_LIST_HEAD(&qset->list_node); - INIT_LIST_HEAD(&qset->stds); - - return qset; -} - -/** - * qset_fill_qh - fill the static endpoint state in a qset's QHead - * @qset: the qset whose QH needs initializing with static endpoint - * state - * @urb: an urb for a transfer to this endpoint - */ -static void qset_fill_qh(struct whc *whc, struct whc_qset *qset, struct urb *urb) -{ - struct usb_device *usb_dev = urb->dev; - struct wusb_dev *wusb_dev = usb_dev->wusb_dev; - struct usb_wireless_ep_comp_descriptor *epcd; - bool is_out; - uint8_t phy_rate; - - is_out = usb_pipeout(urb->pipe); - - qset->max_packet = le16_to_cpu(urb->ep->desc.wMaxPacketSize); - - epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra; - if (epcd) { - qset->max_seq = epcd->bMaxSequence; - qset->max_burst = epcd->bMaxBurst; - } else { - qset->max_seq = 2; - qset->max_burst = 1; - } - - /* - * Initial PHY rate is 53.3 Mbit/s for control endpoints or - * the maximum supported by the device for other endpoints - * (unless limited by the user). - */ - if (usb_pipecontrol(urb->pipe)) - phy_rate = UWB_PHY_RATE_53; - else { - uint16_t phy_rates; - - phy_rates = le16_to_cpu(wusb_dev->wusb_cap_descr->wPHYRates); - phy_rate = fls(phy_rates) - 1; - if (phy_rate > whc->wusbhc.phy_rate) - phy_rate = whc->wusbhc.phy_rate; - } - - qset->qh.info1 = cpu_to_le32( - QH_INFO1_EP(usb_pipeendpoint(urb->pipe)) - | (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN) - | usb_pipe_to_qh_type(urb->pipe) - | QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum)) - | QH_INFO1_MAX_PKT_LEN(qset->max_packet) - ); - qset->qh.info2 = cpu_to_le32( - QH_INFO2_BURST(qset->max_burst) - | QH_INFO2_DBP(0) - | QH_INFO2_MAX_COUNT(3) - | QH_INFO2_MAX_RETRY(3) - | QH_INFO2_MAX_SEQ(qset->max_seq - 1) - ); - /* FIXME: where can we obtain these Tx parameters from? Why - * doesn't the chip know what Tx power to use? It knows the Rx - * strength and can presumably guess the Tx power required - * from that? */ - qset->qh.info3 = cpu_to_le32( - QH_INFO3_TX_RATE(phy_rate) - | QH_INFO3_TX_PWR(0) /* 0 == max power */ - ); - - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); -} - -/** - * qset_clear - clear fields in a qset so it may be reinserted into a - * schedule. - * - * The sequence number and current window are not cleared (see - * qset_reset()). - */ -void qset_clear(struct whc *whc, struct whc_qset *qset) -{ - qset->td_start = qset->td_end = qset->ntds = 0; - - qset->qh.link = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); - qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; - qset->qh.err_count = 0; - qset->qh.scratch[0] = 0; - qset->qh.scratch[1] = 0; - qset->qh.scratch[2] = 0; - - memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay)); - - init_completion(&qset->remove_complete); -} - -/** - * qset_reset - reset endpoint state in a qset. - * - * Clears the sequence number and current window. This qset must not - * be in the ASL or PZL. - */ -void qset_reset(struct whc *whc, struct whc_qset *qset) -{ - qset->reset = 0; - - qset->qh.status &= ~QH_STATUS_SEQ_MASK; - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); -} - -/** - * get_qset - get the qset for an async endpoint - * - * A new qset is created if one does not already exist. - */ -struct whc_qset *get_qset(struct whc *whc, struct urb *urb, - gfp_t mem_flags) -{ - struct whc_qset *qset; - - qset = urb->ep->hcpriv; - if (qset == NULL) { - qset = qset_alloc(whc, mem_flags); - if (qset == NULL) - return NULL; - - qset->ep = urb->ep; - urb->ep->hcpriv = qset; - qset_fill_qh(whc, qset, urb); - } - return qset; -} - -void qset_remove_complete(struct whc *whc, struct whc_qset *qset) -{ - qset->remove = 0; - list_del_init(&qset->list_node); - complete(&qset->remove_complete); -} - -/** - * qset_add_qtds - add qTDs for an URB to a qset - * - * Returns true if the list (ASL/PZL) must be updated because (for a - * WHCI 0.95 controller) an activated qTD was pointed to be iCur. - */ -enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset) -{ - struct whc_std *std; - enum whc_update update = 0; - - list_for_each_entry(std, &qset->stds, list_node) { - struct whc_qtd *qtd; - uint32_t status; - - if (qset->ntds >= WHCI_QSET_TD_MAX - || (qset->pause_after_urb && std->urb != qset->pause_after_urb)) - break; - - if (std->qtd) - continue; /* already has a qTD */ - - qtd = std->qtd = &qset->qtd[qset->td_end]; - - /* Fill in setup bytes for control transfers. */ - if (usb_pipecontrol(std->urb->pipe)) - memcpy(qtd->setup, std->urb->setup_packet, 8); - - status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len); - - if (whc_std_last(std) && usb_pipeout(std->urb->pipe)) - status |= QTD_STS_LAST_PKT; - - /* - * For an IN transfer the iAlt field should be set so - * the h/w will automatically advance to the next - * transfer. However, if there are 8 or more TDs - * remaining in this transfer then iAlt cannot be set - * as it could point to somewhere in this transfer. - */ - if (std->ntds_remaining < WHCI_QSET_TD_MAX) { - int ialt; - ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX; - status |= QTD_STS_IALT(ialt); - } else if (usb_pipein(std->urb->pipe)) - qset->pause_after_urb = std->urb; - - if (std->num_pointers) - qtd->options = cpu_to_le32(QTD_OPT_IOC); - else - qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL); - qtd->page_list_ptr = cpu_to_le64(std->dma_addr); - - qtd->status = cpu_to_le32(status); - - if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end) - update = WHC_UPDATE_UPDATED; - - if (++qset->td_end >= WHCI_QSET_TD_MAX) - qset->td_end = 0; - qset->ntds++; - } - - return update; -} - -/** - * qset_remove_qtd - remove the first qTD from a qset. - * - * The qTD might be still active (if it's part of a IN URB that - * resulted in a short read) so ensure it's deactivated. - */ -static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset) -{ - qset->qtd[qset->td_start].status = 0; - - if (++qset->td_start >= WHCI_QSET_TD_MAX) - qset->td_start = 0; - qset->ntds--; -} - -static void qset_copy_bounce_to_sg(struct whc *whc, struct whc_std *std) -{ - struct scatterlist *sg; - void *bounce; - size_t remaining, offset; - - bounce = std->bounce_buf; - remaining = std->len; - - sg = std->bounce_sg; - offset = std->bounce_offset; - - while (remaining) { - size_t len; - - len = min(sg->length - offset, remaining); - memcpy(sg_virt(sg) + offset, bounce, len); - - bounce += len; - remaining -= len; - - offset += len; - if (offset >= sg->length) { - sg = sg_next(sg); - offset = 0; - } - } - -} - -/** - * qset_free_std - remove an sTD and free it. - * @whc: the WHCI host controller - * @std: the sTD to remove and free. - */ -void qset_free_std(struct whc *whc, struct whc_std *std) -{ - list_del(&std->list_node); - if (std->bounce_buf) { - bool is_out = usb_pipeout(std->urb->pipe); - dma_addr_t dma_addr; - - if (std->num_pointers) - dma_addr = le64_to_cpu(std->pl_virt[0].buf_ptr); - else - dma_addr = std->dma_addr; - - dma_unmap_single(whc->wusbhc.dev, dma_addr, - std->len, is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - if (!is_out) - qset_copy_bounce_to_sg(whc, std); - kfree(std->bounce_buf); - } - if (std->pl_virt) { - if (!dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) - dma_unmap_single(whc->wusbhc.dev, std->dma_addr, - std->num_pointers * sizeof(struct whc_page_list_entry), - DMA_TO_DEVICE); - kfree(std->pl_virt); - std->pl_virt = NULL; - } - kfree(std); -} - -/** - * qset_remove_qtds - remove an URB's qTDs (and sTDs). - */ -static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset, - struct urb *urb) -{ - struct whc_std *std, *t; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb != urb) - break; - if (std->qtd != NULL) - qset_remove_qtd(whc, qset); - qset_free_std(whc, std); - } -} - -/** - * qset_free_stds - free any remaining sTDs for an URB. - */ -static void qset_free_stds(struct whc_qset *qset, struct urb *urb) -{ - struct whc_std *std, *t; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) - qset_free_std(qset->whc, std); - } -} - -static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags) -{ - dma_addr_t dma_addr = std->dma_addr; - dma_addr_t sp, ep; - size_t pl_len; - int p; - - /* Short buffers don't need a page list. */ - if (std->len <= WHCI_PAGE_SIZE) { - std->num_pointers = 0; - return 0; - } - - sp = dma_addr & ~(WHCI_PAGE_SIZE-1); - ep = dma_addr + std->len; - std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE); - - pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - std->pl_virt = kmalloc(pl_len, mem_flags); - if (std->pl_virt == NULL) - return -ENOMEM; - std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE); - if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) { - kfree(std->pl_virt); - return -EFAULT; - } - - for (p = 0; p < std->num_pointers; p++) { - std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); - dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1); - } - - return 0; -} - -/** - * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system. - */ -static void urb_dequeue_work(struct work_struct *work) -{ - struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work); - struct whc_qset *qset = wurb->qset; - struct whc *whc = qset->whc; - unsigned long flags; - - if (wurb->is_async) - asl_update(whc, WUSBCMD_ASYNC_UPDATED - | WUSBCMD_ASYNC_SYNCED_DB - | WUSBCMD_ASYNC_QSET_RM); - else - pzl_update(whc, WUSBCMD_PERIODIC_UPDATED - | WUSBCMD_PERIODIC_SYNCED_DB - | WUSBCMD_PERIODIC_QSET_RM); - - spin_lock_irqsave(&whc->lock, flags); - qset_remove_urb(whc, qset, wurb->urb, wurb->status); - spin_unlock_irqrestore(&whc->lock, flags); -} - -static struct whc_std *qset_new_std(struct whc *whc, struct whc_qset *qset, - struct urb *urb, gfp_t mem_flags) -{ - struct whc_std *std; - - std = kzalloc(sizeof(struct whc_std), mem_flags); - if (std == NULL) - return NULL; - - std->urb = urb; - std->qtd = NULL; - - INIT_LIST_HEAD(&std->list_node); - list_add_tail(&std->list_node, &qset->stds); - - return std; -} - -static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *urb, - gfp_t mem_flags) -{ - size_t remaining; - struct scatterlist *sg; - int i; - int ntds = 0; - struct whc_std *std = NULL; - struct whc_page_list_entry *new_pl_virt; - dma_addr_t prev_end = 0; - size_t pl_len; - int p = 0; - - remaining = urb->transfer_buffer_length; - - for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) { - dma_addr_t dma_addr; - size_t dma_remaining; - dma_addr_t sp, ep; - int num_pointers; - - if (remaining == 0) { - break; - } - - dma_addr = sg_dma_address(sg); - dma_remaining = min_t(size_t, sg_dma_len(sg), remaining); - - while (dma_remaining) { - size_t dma_len; - - /* - * We can use the previous std (if it exists) provided that: - * - the previous one ended on a page boundary. - * - the current one begins on a page boundary. - * - the previous one isn't full. - * - * If a new std is needed but the previous one - * was not a whole number of packets then this - * sg list cannot be mapped onto multiple - * qTDs. Return an error and let the caller - * sort it out. - */ - if (!std - || (prev_end & (WHCI_PAGE_SIZE-1)) - || (dma_addr & (WHCI_PAGE_SIZE-1)) - || std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) { - if (std && std->len % qset->max_packet != 0) - return -EINVAL; - std = qset_new_std(whc, qset, urb, mem_flags); - if (std == NULL) { - return -ENOMEM; - } - ntds++; - p = 0; - } - - dma_len = dma_remaining; - - /* - * If the remainder of this element doesn't - * fit in a single qTD, limit the qTD to a - * whole number of packets. This allows the - * remainder to go into the next qTD. - */ - if (std->len + dma_len > QTD_MAX_XFER_SIZE) { - dma_len = (QTD_MAX_XFER_SIZE / qset->max_packet) - * qset->max_packet - std->len; - } - - std->len += dma_len; - std->ntds_remaining = -1; /* filled in later */ - - sp = dma_addr & ~(WHCI_PAGE_SIZE-1); - ep = dma_addr + dma_len; - num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE); - std->num_pointers += num_pointers; - - pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - - new_pl_virt = krealloc(std->pl_virt, pl_len, mem_flags); - if (new_pl_virt == NULL) { - kfree(std->pl_virt); - std->pl_virt = NULL; - return -ENOMEM; - } - std->pl_virt = new_pl_virt; - - for (;p < std->num_pointers; p++) { - std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); - dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1); - } - - prev_end = dma_addr = ep; - dma_remaining -= dma_len; - remaining -= dma_len; - } - } - - /* Now the number of stds is know, go back and fill in - std->ntds_remaining. */ - list_for_each_entry(std, &qset->stds, list_node) { - if (std->ntds_remaining == -1) { - pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, - pl_len, DMA_TO_DEVICE); - if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) - return -EFAULT; - std->ntds_remaining = ntds--; - } - } - return 0; -} - -/** - * qset_add_urb_sg_linearize - add an urb with sg list, copying the data - * - * If the URB contains an sg list whose elements cannot be directly - * mapped to qTDs then the data must be transferred via bounce - * buffers. - */ -static int qset_add_urb_sg_linearize(struct whc *whc, struct whc_qset *qset, - struct urb *urb, gfp_t mem_flags) -{ - bool is_out = usb_pipeout(urb->pipe); - size_t max_std_len; - size_t remaining; - int ntds = 0; - struct whc_std *std = NULL; - void *bounce = NULL; - struct scatterlist *sg; - int i; - - /* limit maximum bounce buffer to 16 * 3.5 KiB ~= 28 k */ - max_std_len = qset->max_burst * qset->max_packet; - - remaining = urb->transfer_buffer_length; - - for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) { - size_t len; - size_t sg_remaining; - void *orig; - - if (remaining == 0) { - break; - } - - sg_remaining = min_t(size_t, remaining, sg->length); - orig = sg_virt(sg); - - while (sg_remaining) { - if (!std || std->len == max_std_len) { - std = qset_new_std(whc, qset, urb, mem_flags); - if (std == NULL) - return -ENOMEM; - std->bounce_buf = kmalloc(max_std_len, mem_flags); - if (std->bounce_buf == NULL) - return -ENOMEM; - std->bounce_sg = sg; - std->bounce_offset = orig - sg_virt(sg); - bounce = std->bounce_buf; - ntds++; - } - - len = min(sg_remaining, max_std_len - std->len); - - if (is_out) - memcpy(bounce, orig, len); - - std->len += len; - std->ntds_remaining = -1; /* filled in later */ - - bounce += len; - orig += len; - sg_remaining -= len; - remaining -= len; - } - } - - /* - * For each of the new sTDs, map the bounce buffers, create - * page lists (if necessary), and fill in std->ntds_remaining. - */ - list_for_each_entry(std, &qset->stds, list_node) { - if (std->ntds_remaining != -1) - continue; - - std->dma_addr = dma_map_single(&whc->umc->dev, std->bounce_buf, std->len, - is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - if (dma_mapping_error(&whc->umc->dev, std->dma_addr)) - return -EFAULT; - - if (qset_fill_page_list(whc, std, mem_flags) < 0) - return -ENOMEM; - - std->ntds_remaining = ntds--; - } - - return 0; -} - -/** - * qset_add_urb - add an urb to the qset's queue. - * - * The URB is chopped into sTDs, one for each qTD that will required. - * At least one qTD (and sTD) is required even if the transfer has no - * data (e.g., for some control transfers). - */ -int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, - gfp_t mem_flags) -{ - struct whc_urb *wurb; - int remaining = urb->transfer_buffer_length; - u64 transfer_dma = urb->transfer_dma; - int ntds_remaining; - int ret; - - wurb = kzalloc(sizeof(struct whc_urb), mem_flags); - if (wurb == NULL) - goto err_no_mem; - urb->hcpriv = wurb; - wurb->qset = qset; - wurb->urb = urb; - INIT_WORK(&wurb->dequeue_work, urb_dequeue_work); - - if (urb->num_sgs) { - ret = qset_add_urb_sg(whc, qset, urb, mem_flags); - if (ret == -EINVAL) { - qset_free_stds(qset, urb); - ret = qset_add_urb_sg_linearize(whc, qset, urb, mem_flags); - } - if (ret < 0) - goto err_no_mem; - return 0; - } - - ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE); - if (ntds_remaining == 0) - ntds_remaining = 1; - - while (ntds_remaining) { - struct whc_std *std; - size_t std_len; - - std_len = remaining; - if (std_len > QTD_MAX_XFER_SIZE) - std_len = QTD_MAX_XFER_SIZE; - - std = qset_new_std(whc, qset, urb, mem_flags); - if (std == NULL) - goto err_no_mem; - - std->dma_addr = transfer_dma; - std->len = std_len; - std->ntds_remaining = ntds_remaining; - - if (qset_fill_page_list(whc, std, mem_flags) < 0) - goto err_no_mem; - - ntds_remaining--; - remaining -= std_len; - transfer_dma += std_len; - } - - return 0; - -err_no_mem: - qset_free_stds(qset, urb); - return -ENOMEM; -} - -/** - * qset_remove_urb - remove an URB from the urb queue. - * - * The URB is returned to the USB subsystem. - */ -void qset_remove_urb(struct whc *whc, struct whc_qset *qset, - struct urb *urb, int status) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - struct whc_urb *wurb = urb->hcpriv; - - usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb); - /* Drop the lock as urb->complete() may enqueue another urb. */ - spin_unlock(&whc->lock); - wusbhc_giveback_urb(wusbhc, urb, status); - spin_lock(&whc->lock); - - kfree(wurb); -} - -/** - * get_urb_status_from_qtd - get the completed urb status from qTD status - * @urb: completed urb - * @status: qTD status - */ -static int get_urb_status_from_qtd(struct urb *urb, u32 status) -{ - if (status & QTD_STS_HALTED) { - if (status & QTD_STS_DBE) - return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM; - else if (status & QTD_STS_BABBLE) - return -EOVERFLOW; - else if (status & QTD_STS_RCE) - return -ETIME; - return -EPIPE; - } - if (usb_pipein(urb->pipe) - && (urb->transfer_flags & URB_SHORT_NOT_OK) - && urb->actual_length < urb->transfer_buffer_length) - return -EREMOTEIO; - return 0; -} - -/** - * process_inactive_qtd - process an inactive (but not halted) qTD. - * - * Update the urb with the transfer bytes from the qTD, if the urb is - * completely transferred or (in the case of an IN only) the LPF is - * set, then the transfer is complete and the urb should be returned - * to the system. - */ -void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd) -{ - struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); - struct urb *urb = std->urb; - uint32_t status; - bool complete; - - status = le32_to_cpu(qtd->status); - - urb->actual_length += std->len - QTD_STS_TO_LEN(status); - - if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT)) - complete = true; - else - complete = whc_std_last(std); - - qset_remove_qtd(whc, qset); - qset_free_std(whc, std); - - /* - * Transfers for this URB are complete? Then return it to the - * USB subsystem. - */ - if (complete) { - qset_remove_qtds(whc, qset, urb); - qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status)); - - /* - * If iAlt isn't valid then the hardware didn't - * advance iCur. Adjust the start and end pointers to - * match iCur. - */ - if (!(status & QTD_STS_IALT_VALID)) - qset->td_start = qset->td_end - = QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status)); - qset->pause_after_urb = NULL; - } -} - -/** - * process_halted_qtd - process a qset with a halted qtd - * - * Remove all the qTDs for the failed URB and return the failed URB to - * the USB subsystem. Then remove all other qTDs so the qset can be - * removed. - * - * FIXME: this is the point where rate adaptation can be done. If a - * transfer failed because it exceeded the maximum number of retries - * then it could be reactivated with a slower rate without having to - * remove the qset. - */ -void process_halted_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd) -{ - struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); - struct urb *urb = std->urb; - int urb_status; - - urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status)); - - qset_remove_qtds(whc, qset, urb); - qset_remove_urb(whc, qset, urb, urb_status); - - list_for_each_entry(std, &qset->stds, list_node) { - if (qset->ntds == 0) - break; - qset_remove_qtd(whc, qset); - std->qtd = NULL; - } - - qset->remove = 1; -} - -void qset_free(struct whc *whc, struct whc_qset *qset) -{ - dma_pool_free(whc->qset_pool, qset, qset->qset_dma); -} - -/** - * qset_delete - wait for a qset to be unused, then free it. - */ -void qset_delete(struct whc *whc, struct whc_qset *qset) -{ - wait_for_completion(&qset->remove_complete); - qset_free(whc, qset); -} diff --git a/drivers/staging/wusbcore/host/whci/whcd.h b/drivers/staging/wusbcore/host/whci/whcd.h deleted file mode 100644 index a442a2589e83..000000000000 --- a/drivers/staging/wusbcore/host/whci/whcd.h +++ /dev/null @@ -1,202 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) private header. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#ifndef __WHCD_H -#define __WHCD_H - -#include <linux/workqueue.h> - -#include "../../../uwb/include/whci.h" -#include "../../../uwb/include/umc.h" -#include "whci-hc.h" - -/* Generic command timeout. */ -#define WHC_GENCMD_TIMEOUT_MS 100 - -struct whc_dbg; - -struct whc { - struct wusbhc wusbhc; - struct umc_dev *umc; - - resource_size_t base_phys; - void __iomem *base; - int irq; - - u8 n_devices; - u8 n_keys; - u8 n_mmc_ies; - - u64 *pz_list; - struct dn_buf_entry *dn_buf; - struct di_buf_entry *di_buf; - dma_addr_t pz_list_dma; - dma_addr_t dn_buf_dma; - dma_addr_t di_buf_dma; - - spinlock_t lock; - struct mutex mutex; - - void * gen_cmd_buf; - dma_addr_t gen_cmd_buf_dma; - wait_queue_head_t cmd_wq; - - struct workqueue_struct *workqueue; - struct work_struct dn_work; - - struct dma_pool *qset_pool; - - struct list_head async_list; - struct list_head async_removed_list; - wait_queue_head_t async_list_wq; - struct work_struct async_work; - - struct list_head periodic_list[5]; - struct list_head periodic_removed_list; - wait_queue_head_t periodic_list_wq; - struct work_struct periodic_work; - - struct whc_dbg *dbg; -}; - -#define wusbhc_to_whc(w) (container_of((w), struct whc, wusbhc)) - -/** - * struct whc_std - a software TD. - * @urb: the URB this sTD is for. - * @offset: start of the URB's data for this TD. - * @len: the length of data in the associated TD. - * @ntds_remaining: number of TDs (starting from this one) in this transfer. - * - * @bounce_buf: a bounce buffer if the std was from an urb with a sg - * list that could not be mapped to qTDs directly. - * @bounce_sg: the first scatterlist element bounce_buf is for. - * @bounce_offset: the offset into bounce_sg for the start of bounce_buf. - * - * Queued URBs may require more TDs than are available in a qset so we - * use a list of these "software TDs" (sTDs) to hold per-TD data. - */ -struct whc_std { - struct urb *urb; - size_t len; - int ntds_remaining; - struct whc_qtd *qtd; - - struct list_head list_node; - int num_pointers; - dma_addr_t dma_addr; - struct whc_page_list_entry *pl_virt; - - void *bounce_buf; - struct scatterlist *bounce_sg; - unsigned bounce_offset; -}; - -/** - * struct whc_urb - per URB host controller structure. - * @urb: the URB this struct is for. - * @qset: the qset associated to the URB. - * @dequeue_work: the work to remove the URB when dequeued. - * @is_async: the URB belongs to async sheduler or not. - * @status: the status to be returned when calling wusbhc_giveback_urb. - */ -struct whc_urb { - struct urb *urb; - struct whc_qset *qset; - struct work_struct dequeue_work; - bool is_async; - int status; -}; - -/** - * whc_std_last - is this sTD the URB's last? - * @std: the sTD to check. - */ -static inline bool whc_std_last(struct whc_std *std) -{ - return std->ntds_remaining <= 1; -} - -enum whc_update { - WHC_UPDATE_ADDED = 0x01, - WHC_UPDATE_REMOVED = 0x02, - WHC_UPDATE_UPDATED = 0x04, -}; - -/* init.c */ -int whc_init(struct whc *whc); -void whc_clean_up(struct whc *whc); - -/* hw.c */ -void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); -int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); -void whc_hw_error(struct whc *whc, const char *reason); - -/* wusb.c */ -int whc_wusbhc_start(struct wusbhc *wusbhc); -void whc_wusbhc_stop(struct wusbhc *wusbhc, int delay); -int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - u8 handle, struct wuie_hdr *wuie); -int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle); -int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm); -int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev); -int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots); -int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *ptk, size_t key_size); -int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *gtk, size_t key_size); -int whc_set_cluster_id(struct whc *whc, u8 bcid); - -/* int.c */ -irqreturn_t whc_int_handler(struct usb_hcd *hcd); -void whc_dn_work(struct work_struct *work); - -/* asl.c */ -void asl_start(struct whc *whc); -void asl_stop(struct whc *whc); -int asl_init(struct whc *whc); -void asl_clean_up(struct whc *whc); -int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); -int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status); -void asl_qset_delete(struct whc *whc, struct whc_qset *qset); -void scan_async_work(struct work_struct *work); - -/* pzl.c */ -int pzl_init(struct whc *whc); -void pzl_clean_up(struct whc *whc); -void pzl_start(struct whc *whc); -void pzl_stop(struct whc *whc); -int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); -int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status); -void pzl_qset_delete(struct whc *whc, struct whc_qset *qset); -void scan_periodic_work(struct work_struct *work); - -/* qset.c */ -struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags); -void qset_free(struct whc *whc, struct whc_qset *qset); -struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); -void qset_delete(struct whc *whc, struct whc_qset *qset); -void qset_clear(struct whc *whc, struct whc_qset *qset); -void qset_reset(struct whc *whc, struct whc_qset *qset); -int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, - gfp_t mem_flags); -void qset_free_std(struct whc *whc, struct whc_std *std); -void qset_remove_urb(struct whc *whc, struct whc_qset *qset, - struct urb *urb, int status); -void process_halted_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd); -void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd); -enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset); -void qset_remove_complete(struct whc *whc, struct whc_qset *qset); -void pzl_update(struct whc *whc, uint32_t wusbcmd); -void asl_update(struct whc *whc, uint32_t wusbcmd); - -/* debug.c */ -void whc_dbg_init(struct whc *whc); -void whc_dbg_clean_up(struct whc *whc); - -#endif /* #ifndef __WHCD_H */ diff --git a/drivers/staging/wusbcore/host/whci/whci-hc.h b/drivers/staging/wusbcore/host/whci/whci-hc.h deleted file mode 100644 index 5a86a57a80cc..000000000000 --- a/drivers/staging/wusbcore/host/whci/whci-hc.h +++ /dev/null @@ -1,401 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) data structures. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#ifndef _WHCI_WHCI_HC_H -#define _WHCI_WHCI_HC_H - -#include <linux/list.h> - -/** - * WHCI_PAGE_SIZE - page size use by WHCI - * - * WHCI assumes that host system uses pages of 4096 octets. - */ -#define WHCI_PAGE_SIZE 4096 - - -/** - * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single - * qtd. - * - * This is 2^20 - 1. - */ -#define QTD_MAX_XFER_SIZE 1048575 - - -/** - * struct whc_qtd - Queue Element Transfer Descriptors (qTD) - * - * This describes the data for a bulk, control or interrupt transfer. - * - * [WHCI] section 3.2.4 - */ -struct whc_qtd { - __le32 status; /*< remaining transfer len and transfer status */ - __le32 options; - __le64 page_list_ptr; /*< physical pointer to data buffer page list*/ - __u8 setup[8]; /*< setup data for control transfers */ -} __attribute__((packed)); - -#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */ -#define QTD_STS_HALTED (1 << 30) /* transfer halted */ -#define QTD_STS_DBE (1 << 29) /* data buffer error */ -#define QTD_STS_BABBLE (1 << 28) /* babble detected */ -#define QTD_STS_RCE (1 << 27) /* retry count exceeded */ -#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */ -#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */ -#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */ -#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */ -#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */ -#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff) - -#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */ -#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */ - -/** - * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD) - * - * This describes the data and other parameters for an isochronous - * transfer. - * - * [WHCI] section 3.2.5 - */ -struct whc_itd { - __le16 presentation_time; /*< presentation time for OUT transfers */ - __u8 num_segments; /*< number of data segments in segment list */ - __u8 status; /*< command execution status */ - __le32 options; /*< misc transfer options */ - __le64 page_list_ptr; /*< physical pointer to data buffer page list */ - __le64 seg_list_ptr; /*< physical pointer to segment list */ -} __attribute__((packed)); - -#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */ -#define ITD_STS_DBE (1 << 5) /* data buffer error */ -#define ITD_STS_BABBLE (1 << 4) /* babble detected */ -#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */ - -#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */ -#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */ - -/** - * Page list entry. - * - * A TD's page list must contain sufficient page list entries for the - * total data length in the TD. - * - * [WHCI] section 3.2.4.3 - */ -struct whc_page_list_entry { - __le64 buf_ptr; /*< physical pointer to buffer */ -} __attribute__((packed)); - -/** - * struct whc_seg_list_entry - Segment list entry. - * - * Describes a portion of the data buffer described in the containing - * qTD's page list. - * - * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr - * + qtd->seg_list_ptr[seg].offset; - * - * Segments can't cross page boundries. - * - * [WHCI] section 3.2.5.5 - */ -struct whc_seg_list_entry { - __le16 len; /*< segment length */ - __u8 idx; /*< index into page list */ - __u8 status; /*< segment status */ - __le16 offset; /*< 12 bit offset into page */ -} __attribute__((packed)); - -/** - * struct whc_qhead - endpoint and status information for a qset. - * - * [WHCI] section 3.2.6 - */ -struct whc_qhead { - __le64 link; /*< next qset in list */ - __le32 info1; - __le32 info2; - __le32 info3; - __le16 status; - __le16 err_count; /*< transaction error count */ - __le32 cur_window; - __le32 scratch[3]; /*< h/w scratch area */ - union { - struct whc_qtd qtd; - struct whc_itd itd; - } overlay; -} __attribute__((packed)); - -#define QH_LINK_PTR_MASK (~0x03Full) -#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK) -#define QH_LINK_IQS (1 << 4) /* isochronous queue set */ -#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */ -#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */ - -#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */ -#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */ -#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */ -#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */ -#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */ -#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */ -#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */ -#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */ -#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */ -#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */ -#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */ - -#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */ -#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */ -#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */ -#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */ -#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */ -#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */ -#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ -#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ - -#define QH_INFO3_TX_RATE(r) ((r) << 24) /* PHY rate (see [ECMA-368] section 10.3.1.1) */ -#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ - -#define QH_STATUS_FLOW_CTRL (1 << 15) -#define QH_STATUS_ICUR(i) ((i) << 5) -#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) -#define QH_STATUS_SEQ_MASK 0x1f - -/** - * usb_pipe_to_qh_type - USB core pipe type to QH transfer type - * - * Returns the QH type field for a USB core pipe type. - */ -static inline unsigned usb_pipe_to_qh_type(unsigned pipe) -{ - static const unsigned type[] = { - [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC, - [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT, - [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL, - [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK, - }; - return type[usb_pipetype(pipe)]; -} - -/** - * Maxiumum number of TDs in a qset. - */ -#define WHCI_QSET_TD_MAX 8 - -/** - * struct whc_qset - WUSB data transfers to a specific endpoint - * @qh: the QHead of this qset - * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt - * transfers) - * @itd: up to 8 iTDs (for qsets for isochronous transfers) - * @qset_dma: DMA address for this qset - * @whc: WHCI HC this qset is for - * @ep: endpoint - * @stds: list of sTDs queued to this qset - * @ntds: number of qTDs queued (not necessarily the same as nTDs - * field in the QH) - * @td_start: index of the first qTD in the list - * @td_end: index of next free qTD in the list (provided - * ntds < WHCI_QSET_TD_MAX) - * - * Queue Sets (qsets) are added to the asynchronous schedule list - * (ASL) or the periodic zone list (PZL). - * - * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate). - * Each TD may refer to at most 1 MiB of data. If a single transfer - * has > 8MiB of data, TDs can be reused as they are completed since - * the TD list is used as a circular buffer. Similarly, several - * (smaller) transfers may be queued in a qset. - * - * WHCI controllers may cache portions of the qsets in the ASL and - * PZL, requiring the WHCD to inform the WHC that the lists have been - * updated (fields changed or qsets inserted or removed). For safe - * insertion and removal of qsets from the lists the schedule must be - * stopped to avoid races in updating the QH link pointers. - * - * Since the HC is free to execute qsets in any order, all transfers - * to an endpoint should use the same qset to ensure transfers are - * executed in the order they're submitted. - * - * [WHCI] section 3.2.3 - */ -struct whc_qset { - struct whc_qhead qh; - union { - struct whc_qtd qtd[WHCI_QSET_TD_MAX]; - struct whc_itd itd[WHCI_QSET_TD_MAX]; - }; - - /* private data for WHCD */ - dma_addr_t qset_dma; - struct whc *whc; - struct usb_host_endpoint *ep; - struct list_head stds; - int ntds; - int td_start; - int td_end; - struct list_head list_node; - unsigned in_sw_list:1; - unsigned in_hw_list:1; - unsigned remove:1; - unsigned reset:1; - struct urb *pause_after_urb; - struct completion remove_complete; - uint16_t max_packet; - uint8_t max_burst; - uint8_t max_seq; -}; - -static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target) -{ - if (target) - *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target); - else - *ptr = QH_LINK_T; -} - -/** - * struct di_buf_entry - Device Information (DI) buffer entry. - * - * There's one of these per connected device. - */ -struct di_buf_entry { - __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */ - __le32 addr_sec_info; /*< addressing and security info */ - __le32 reserved[7]; -} __attribute__((packed)); - -#define WHC_DI_SECURE (1 << 31) -#define WHC_DI_DISABLE (1 << 30) -#define WHC_DI_KEY_IDX(k) ((k) << 8) -#define WHC_DI_KEY_IDX_MASK 0x0000ff00 -#define WHC_DI_DEV_ADDR(a) ((a) << 0) -#define WHC_DI_DEV_ADDR_MASK 0x000000ff - -/** - * struct dn_buf_entry - Device Notification (DN) buffer entry. - * - * [WHCI] section 3.2.8 - */ -struct dn_buf_entry { - __u8 msg_size; /*< number of octets of valid DN data */ - __u8 reserved1; - __u8 src_addr; /*< source address */ - __u8 status; /*< buffer entry status */ - __le32 tkid; /*< TKID for source device, valid if secure bit is set */ - __u8 dn_data[56]; /*< up to 56 octets of DN data */ -} __attribute__((packed)); - -#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */ -#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */ - -#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry)) - -/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of - data. [WHCI] section 2.4.7. */ -#define WHC_GEN_CMD_DATA_LEN 256 - -/* - * HC registers. - * - * [WHCI] section 2.4 - */ - -#define WHCIVERSION 0x00 - -#define WHCSPARAMS 0x04 -# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff) -# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff) -# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f) - -#define WUSBCMD 0x08 -# define WUSBCMD_BCID(b) ((b) << 16) -# define WUSBCMD_BCID_MASK (0xff << 16) -# define WUSBCMD_ASYNC_QSET_RM (1 << 12) -# define WUSBCMD_PERIODIC_QSET_RM (1 << 11) -# define WUSBCMD_WUSBSI(s) ((s) << 8) -# define WUSBCMD_WUSBSI_MASK (0x7 << 8) -# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7) -# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6) -# define WUSBCMD_ASYNC_UPDATED (1 << 5) -# define WUSBCMD_PERIODIC_UPDATED (1 << 4) -# define WUSBCMD_ASYNC_EN (1 << 3) -# define WUSBCMD_PERIODIC_EN (1 << 2) -# define WUSBCMD_WHCRESET (1 << 1) -# define WUSBCMD_RUN (1 << 0) - -#define WUSBSTS 0x0c -# define WUSBSTS_ASYNC_SCHED (1 << 15) -# define WUSBSTS_PERIODIC_SCHED (1 << 14) -# define WUSBSTS_DNTS_SCHED (1 << 13) -# define WUSBSTS_HCHALTED (1 << 12) -# define WUSBSTS_GEN_CMD_DONE (1 << 9) -# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8) -# define WUSBSTS_DNTS_OVERFLOW (1 << 7) -# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6) -# define WUSBSTS_HOST_ERR (1 << 5) -# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4) -# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3) -# define WUSBSTS_DNTS_INT (1 << 2) -# define WUSBSTS_ERR_INT (1 << 1) -# define WUSBSTS_INT (1 << 0) -# define WUSBSTS_INT_MASK 0x3ff - -#define WUSBINTR 0x10 -# define WUSBINTR_GEN_CMD_DONE (1 << 9) -# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8) -# define WUSBINTR_DNTS_OVERFLOW (1 << 7) -# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6) -# define WUSBINTR_HOST_ERR (1 << 5) -# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4) -# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3) -# define WUSBINTR_DNTS_INT (1 << 2) -# define WUSBINTR_ERR_INT (1 << 1) -# define WUSBINTR_INT (1 << 0) -# define WUSBINTR_ALL 0x3ff - -#define WUSBGENCMDSTS 0x14 -# define WUSBGENCMDSTS_ACTIVE (1 << 31) -# define WUSBGENCMDSTS_ERROR (1 << 24) -# define WUSBGENCMDSTS_IOC (1 << 23) -# define WUSBGENCMDSTS_MMCIE_ADD 0x01 -# define WUSBGENCMDSTS_MMCIE_RM 0x02 -# define WUSBGENCMDSTS_SET_MAS 0x03 -# define WUSBGENCMDSTS_CHAN_STOP 0x04 -# define WUSBGENCMDSTS_RWP_EN 0x05 - -#define WUSBGENCMDPARAMS 0x18 -#define WUSBGENADDR 0x20 -#define WUSBASYNCLISTADDR 0x28 -#define WUSBDNTSBUFADDR 0x30 -#define WUSBDEVICEINFOADDR 0x38 - -#define WUSBSETSECKEYCMD 0x40 -# define WUSBSETSECKEYCMD_SET (1 << 31) -# define WUSBSETSECKEYCMD_ERASE (1 << 30) -# define WUSBSETSECKEYCMD_GTK (1 << 8) -# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0) - -#define WUSBTKID 0x44 -#define WUSBSECKEY 0x48 -#define WUSBPERIODICLISTBASE 0x58 -#define WUSBMASINDEX 0x60 - -#define WUSBDNTSCTRL 0x64 -# define WUSBDNTSCTRL_ACTIVE (1 << 31) -# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8) -# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0) - -#define WUSBTIME 0x68 -# define WUSBTIME_CHANNEL_TIME_MASK 0x00ffffff - -#define WUSBBPST 0x6c -#define WUSBDIBUPDATED 0x70 - -#endif /* #ifndef _WHCI_WHCI_HC_H */ diff --git a/drivers/staging/wusbcore/host/whci/wusb.c b/drivers/staging/wusbcore/host/whci/wusb.c deleted file mode 100644 index 6d0068ab35e4..000000000000 --- a/drivers/staging/wusbcore/host/whci/wusb.c +++ /dev/null @@ -1,210 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) WUSB operations. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> - -#include "../../../uwb/include/umc.h" -#include "../../wusbhc.h" - -#include "whcd.h" - -static int whc_update_di(struct whc *whc, int idx) -{ - int offset = idx / 32; - u32 bit = 1 << (idx % 32); - - le_writel(bit, whc->base + WUSBDIBUPDATED + offset); - - return whci_wait_for(&whc->umc->dev, - whc->base + WUSBDIBUPDATED + offset, bit, 0, - 100, "DI update"); -} - -/* - * WHCI starts MMCs based on there being a valid GTK so these need - * only start/stop the asynchronous and periodic schedules and send a - * channel stop command. - */ - -int whc_wusbhc_start(struct wusbhc *wusbhc) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - - asl_start(whc); - pzl_start(whc); - - return 0; -} - -void whc_wusbhc_stop(struct wusbhc *wusbhc, int delay) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 stop_time, now_time; - int ret; - - pzl_stop(whc); - asl_stop(whc); - - now_time = le_readl(whc->base + WUSBTIME) & WUSBTIME_CHANNEL_TIME_MASK; - stop_time = (now_time + ((delay * 8) << 7)) & 0x00ffffff; - ret = whc_do_gencmd(whc, WUSBGENCMDSTS_CHAN_STOP, stop_time, NULL, 0); - if (ret == 0) - msleep(delay); -} - -int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - u8 handle, struct wuie_hdr *wuie) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 params; - - params = (interval << 24) - | (repeat_cnt << 16) - | (wuie->bLength << 8) - | handle; - - return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_ADD, params, wuie, wuie->bLength); -} - -int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 params; - - params = handle; - - return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_RM, params, NULL, 0); -} - -int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - - if (stream_index >= 0) - whc_write_wusbcmd(whc, WUSBCMD_WUSBSI_MASK, WUSBCMD_WUSBSI(stream_index)); - - return whc_do_gencmd(whc, WUSBGENCMDSTS_SET_MAS, 0, (void *)mas_bm, sizeof(*mas_bm)); -} - -int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - int idx = wusb_dev->port_idx; - struct di_buf_entry *di = &whc->di_buf[idx]; - int ret; - - mutex_lock(&whc->mutex); - - uwb_mas_bm_copy_le(di->availability_info, &wusb_dev->availability); - di->addr_sec_info &= ~(WHC_DI_DISABLE | WHC_DI_DEV_ADDR_MASK); - di->addr_sec_info |= WHC_DI_DEV_ADDR(wusb_dev->addr); - - ret = whc_update_di(whc, idx); - - mutex_unlock(&whc->mutex); - - return ret; -} - -/* - * Set the number of Device Notification Time Slots (DNTS) and enable - * device notifications. - */ -int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 dntsctrl; - - dntsctrl = WUSBDNTSCTRL_ACTIVE - | WUSBDNTSCTRL_INTERVAL(interval) - | WUSBDNTSCTRL_SLOTS(slots); - - le_writel(dntsctrl, whc->base + WUSBDNTSCTRL); - - return 0; -} - -static int whc_set_key(struct whc *whc, u8 key_index, uint32_t tkid, - const void *key, size_t key_size, bool is_gtk) -{ - uint32_t setkeycmd; - uint32_t seckey[4]; - int i; - int ret; - - memcpy(seckey, key, key_size); - setkeycmd = WUSBSETSECKEYCMD_SET | WUSBSETSECKEYCMD_IDX(key_index); - if (is_gtk) - setkeycmd |= WUSBSETSECKEYCMD_GTK; - - le_writel(tkid, whc->base + WUSBTKID); - for (i = 0; i < 4; i++) - le_writel(seckey[i], whc->base + WUSBSECKEY + 4*i); - le_writel(setkeycmd, whc->base + WUSBSETSECKEYCMD); - - ret = whci_wait_for(&whc->umc->dev, whc->base + WUSBSETSECKEYCMD, - WUSBSETSECKEYCMD_SET, 0, 100, "set key"); - - return ret; -} - -/** - * whc_set_ptk - set the PTK to use for a device. - * - * The index into the key table for this PTK is the same as the - * device's port index. - */ -int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *ptk, size_t key_size) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - struct di_buf_entry *di = &whc->di_buf[port_idx]; - int ret; - - mutex_lock(&whc->mutex); - - if (ptk) { - ret = whc_set_key(whc, port_idx, tkid, ptk, key_size, false); - if (ret) - goto out; - - di->addr_sec_info &= ~WHC_DI_KEY_IDX_MASK; - di->addr_sec_info |= WHC_DI_SECURE | WHC_DI_KEY_IDX(port_idx); - } else - di->addr_sec_info &= ~WHC_DI_SECURE; - - ret = whc_update_di(whc, port_idx); -out: - mutex_unlock(&whc->mutex); - return ret; -} - -/** - * whc_set_gtk - set the GTK for subsequent broadcast packets - * - * The GTK is stored in the last entry in the key table (the previous - * N_DEVICES entries are for the per-device PTKs). - */ -int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *gtk, size_t key_size) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - int ret; - - mutex_lock(&whc->mutex); - - ret = whc_set_key(whc, whc->n_devices, tkid, gtk, key_size, true); - - mutex_unlock(&whc->mutex); - - return ret; -} - -int whc_set_cluster_id(struct whc *whc, u8 bcid) -{ - whc_write_wusbcmd(whc, WUSBCMD_BCID_MASK, WUSBCMD_BCID(bcid)); - return 0; -} diff --git a/drivers/staging/wusbcore/include/association.h b/drivers/staging/wusbcore/include/association.h deleted file mode 100644 index d7f3cb9b9db5..000000000000 --- a/drivers/staging/wusbcore/include/association.h +++ /dev/null @@ -1,151 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB - Cable Based Association - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - */ -#ifndef __LINUX_USB_ASSOCIATION_H -#define __LINUX_USB_ASSOCIATION_H - - -/* - * Association attributes - * - * Association Models Supplement to WUSB 1.0 T[3-1] - * - * Each field in the structures has it's ID, it's length and then the - * value. This is the actual definition of the field's ID and its - * length. - */ -struct wusb_am_attr { - __u8 id; - __u8 len; -}; - -/* Different fields defined by the spec */ -#define WUSB_AR_AssociationTypeId { .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) } -#define WUSB_AR_AssociationSubTypeId { .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) } -#define WUSB_AR_Length { .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) } -#define WUSB_AR_AssociationStatus { .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) } -#define WUSB_AR_LangID { .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) } -#define WUSB_AR_DeviceFriendlyName { .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */ -#define WUSB_AR_HostFriendlyName { .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */ -#define WUSB_AR_CHID { .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) } -#define WUSB_AR_CDID { .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) } -#define WUSB_AR_ConnectionContext { .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) } -#define WUSB_AR_BandGroups { .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) } - -/* CBAF Control Requests (AMS1.0[T4-1] */ -enum { - CBAF_REQ_GET_ASSOCIATION_INFORMATION = 0x01, - CBAF_REQ_GET_ASSOCIATION_REQUEST, - CBAF_REQ_SET_ASSOCIATION_RESPONSE -}; - -/* - * CBAF USB-interface defitions - * - * No altsettings, one optional interrupt endpoint. - */ -enum { - CBAF_IFACECLASS = 0xef, - CBAF_IFACESUBCLASS = 0x03, - CBAF_IFACEPROTOCOL = 0x01, -}; - -/* Association Information (AMS1.0[T4-3]) */ -struct wusb_cbaf_assoc_info { - __le16 Length; - __u8 NumAssociationRequests; - __le16 Flags; - __u8 AssociationRequestsArray[]; -} __attribute__((packed)); - -/* Association Request (AMS1.0[T4-4]) */ -struct wusb_cbaf_assoc_request { - __u8 AssociationDataIndex; - __u8 Reserved; - __le16 AssociationTypeId; - __le16 AssociationSubTypeId; - __le32 AssociationTypeInfoSize; -} __attribute__((packed)); - -enum { - AR_TYPE_WUSB = 0x0001, - AR_TYPE_WUSB_RETRIEVE_HOST_INFO = 0x0000, - AR_TYPE_WUSB_ASSOCIATE = 0x0001, -}; - -/* Association Attribute header (AMS1.0[3.8]) */ -struct wusb_cbaf_attr_hdr { - __le16 id; - __le16 len; -} __attribute__((packed)); - -/* Host Info (AMS1.0[T4-7]) (yeah, more headers and fields...) */ -struct wusb_cbaf_host_info { - struct wusb_cbaf_attr_hdr AssociationTypeId_hdr; - __le16 AssociationTypeId; - struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr; - __le16 AssociationSubTypeId; - struct wusb_cbaf_attr_hdr CHID_hdr; - struct wusb_ckhdid CHID; - struct wusb_cbaf_attr_hdr LangID_hdr; - __le16 LangID; - struct wusb_cbaf_attr_hdr HostFriendlyName_hdr; - __u8 HostFriendlyName[]; -} __attribute__((packed)); - -/* Device Info (AMS1.0[T4-8]) - * - * I still don't get this tag'n'header stuff for each goddamn - * field... - */ -struct wusb_cbaf_device_info { - struct wusb_cbaf_attr_hdr Length_hdr; - __le32 Length; - struct wusb_cbaf_attr_hdr CDID_hdr; - struct wusb_ckhdid CDID; - struct wusb_cbaf_attr_hdr BandGroups_hdr; - __le16 BandGroups; - struct wusb_cbaf_attr_hdr LangID_hdr; - __le16 LangID; - struct wusb_cbaf_attr_hdr DeviceFriendlyName_hdr; - __u8 DeviceFriendlyName[]; -} __attribute__((packed)); - -/* Connection Context; CC_DATA - Success case (AMS1.0[T4-9]) */ -struct wusb_cbaf_cc_data { - struct wusb_cbaf_attr_hdr AssociationTypeId_hdr; - __le16 AssociationTypeId; - struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr; - __le16 AssociationSubTypeId; - struct wusb_cbaf_attr_hdr Length_hdr; - __le32 Length; - struct wusb_cbaf_attr_hdr ConnectionContext_hdr; - struct wusb_ckhdid CHID; - struct wusb_ckhdid CDID; - struct wusb_ckhdid CK; - struct wusb_cbaf_attr_hdr BandGroups_hdr; - __le16 BandGroups; -} __attribute__((packed)); - -/* CC_DATA - Failure case (AMS1.0[T4-10]) */ -struct wusb_cbaf_cc_data_fail { - struct wusb_cbaf_attr_hdr AssociationTypeId_hdr; - __le16 AssociationTypeId; - struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr; - __le16 AssociationSubTypeId; - struct wusb_cbaf_attr_hdr Length_hdr; - __le16 Length; - struct wusb_cbaf_attr_hdr AssociationStatus_hdr; - __u32 AssociationStatus; -} __attribute__((packed)); - -#endif /* __LINUX_USB_ASSOCIATION_H */ diff --git a/drivers/staging/wusbcore/include/wusb-wa.h b/drivers/staging/wusbcore/include/wusb-wa.h deleted file mode 100644 index 64a840b5106e..000000000000 --- a/drivers/staging/wusbcore/include/wusb-wa.h +++ /dev/null @@ -1,304 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Wire Adapter constants and structures. - * - * Copyright (C) 2005-2006 Intel Corporation. - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - * FIXME: organize properly, group logically - * - * All the event structures are defined in uwb/spec.h, as they are - * common to the WHCI and WUSB radio control interfaces. - * - * References: - * [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8 - */ -#ifndef __LINUX_USB_WUSB_WA_H -#define __LINUX_USB_WUSB_WA_H - -/** - * Radio Command Request for the Radio Control Interface - * - * Radio Control Interface command and event codes are the same as - * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_* - */ -enum { - WA_EXEC_RC_CMD = 40, /* Radio Control command Request */ -}; - -/* Wireless Adapter Requests ([WUSB] table 8-51) */ -enum { - WUSB_REQ_ADD_MMC_IE = 20, - WUSB_REQ_REMOVE_MMC_IE = 21, - WUSB_REQ_SET_NUM_DNTS = 22, - WUSB_REQ_SET_CLUSTER_ID = 23, - WUSB_REQ_SET_DEV_INFO = 24, - WUSB_REQ_GET_TIME = 25, - WUSB_REQ_SET_STREAM_IDX = 26, - WUSB_REQ_SET_WUSB_MAS = 27, - WUSB_REQ_CHAN_STOP = 28, -}; - - -/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */ -enum { - WUSB_TIME_ADJ = 0, - WUSB_TIME_BPST = 1, - WUSB_TIME_WUSB = 2, -}; - -enum { - WA_ENABLE = 0x01, - WA_RESET = 0x02, - RPIPE_PAUSE = 0x1, - RPIPE_STALL = 0x2, -}; - -/* Responses from Get Status request ([WUSB] section 8.3.1.6) */ -enum { - WA_STATUS_ENABLED = 0x01, - WA_STATUS_RESETTING = 0x02 -}; - -enum rpipe_crs { - RPIPE_CRS_CTL = 0x01, - RPIPE_CRS_ISO = 0x02, - RPIPE_CRS_BULK = 0x04, - RPIPE_CRS_INTR = 0x08 -}; - -/** - * RPipe descriptor ([WUSB] section 8.5.2.11) - * - * FIXME: explain rpipes - */ -struct usb_rpipe_descriptor { - u8 bLength; - u8 bDescriptorType; - __le16 wRPipeIndex; - __le16 wRequests; - __le16 wBlocks; /* rw if 0 */ - __le16 wMaxPacketSize; /* rw */ - union { - u8 dwa_bHSHubAddress; /* rw: DWA. */ - u8 hwa_bMaxBurst; /* rw: HWA. */ - }; - union { - u8 dwa_bHSHubPort; /* rw: DWA. */ - u8 hwa_bDeviceInfoIndex; /* rw: HWA. */ - }; - u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */ - union { - u8 dwa_bDeviceAddress; /* rw: DWA Target device address. */ - u8 hwa_reserved; /* rw: HWA. */ - }; - u8 bEndpointAddress; /* rw: Target EP address */ - u8 bDataSequence; /* ro: Current Data sequence */ - __le32 dwCurrentWindow; /* ro */ - u8 bMaxDataSequence; /* ro?: max supported seq */ - u8 bInterval; /* rw: */ - u8 bOverTheAirInterval; /* rw: */ - u8 bmAttribute; /* ro? */ - u8 bmCharacteristics; /* ro? enum rpipe_attr, supported xsactions */ - u8 bmRetryOptions; /* rw? */ - __le16 wNumTransactionErrors; /* rw */ -} __attribute__ ((packed)); - -/** - * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4) - * - * These are the notifications coming on the notification endpoint of - * an HWA and a DWA. - */ -enum wa_notif_type { - DWA_NOTIF_RWAKE = 0x91, - DWA_NOTIF_PORTSTATUS = 0x92, - WA_NOTIF_TRANSFER = 0x93, - HWA_NOTIF_BPST_ADJ = 0x94, - HWA_NOTIF_DN = 0x95, -}; - -/** - * Wire Adapter notification header - * - * Notifications coming from a wire adapter use a common header - * defined in [WUSB] sections 8.4.5 & 8.5.4. - */ -struct wa_notif_hdr { - u8 bLength; - u8 bNotifyType; /* enum wa_notif_type */ -} __packed; - -/** - * HWA DN Received notification [(WUSB] section 8.5.4.2) - * - * The DNData is specified in WUSB1.0[7.6]. For each device - * notification we received, we just need to dispatch it. - * - * @dndata: this is really an array of notifications, but all start - * with the same header. - */ -struct hwa_notif_dn { - struct wa_notif_hdr hdr; - u8 bSourceDeviceAddr; /* from errata 2005/07 */ - u8 bmAttributes; - struct wusb_dn_hdr dndata[]; -} __packed; - -/* [WUSB] section 8.3.3 */ -enum wa_xfer_type { - WA_XFER_TYPE_CTL = 0x80, - WA_XFER_TYPE_BI = 0x81, /* bulk/interrupt */ - WA_XFER_TYPE_ISO = 0x82, - WA_XFER_RESULT = 0x83, - WA_XFER_ABORT = 0x84, - WA_XFER_ISO_PACKET_INFO = 0xA0, - WA_XFER_ISO_PACKET_STATUS = 0xA1, -}; - -/* [WUSB] section 8.3.3 */ -struct wa_xfer_hdr { - u8 bLength; /* 0x18 */ - u8 bRequestType; /* 0x80 WA_REQUEST_TYPE_CTL */ - __le16 wRPipe; /* RPipe index */ - __le32 dwTransferID; /* Host-assigned ID */ - __le32 dwTransferLength; /* Length of data to xfer */ - u8 bTransferSegment; -} __packed; - -struct wa_xfer_ctl { - struct wa_xfer_hdr hdr; - u8 bmAttribute; - __le16 wReserved; - struct usb_ctrlrequest baSetupData; -} __packed; - -struct wa_xfer_bi { - struct wa_xfer_hdr hdr; - u8 bReserved; - __le16 wReserved; -} __packed; - -/* [WUSB] section 8.5.5 */ -struct wa_xfer_hwaiso { - struct wa_xfer_hdr hdr; - u8 bReserved; - __le16 wPresentationTime; - __le32 dwNumOfPackets; -} __packed; - -struct wa_xfer_packet_info_hwaiso { - __le16 wLength; - u8 bPacketType; - u8 bReserved; - __le16 PacketLength[0]; -} __packed; - -struct wa_xfer_packet_status_len_hwaiso { - __le16 PacketLength; - __le16 PacketStatus; -} __packed; - -struct wa_xfer_packet_status_hwaiso { - __le16 wLength; - u8 bPacketType; - u8 bReserved; - struct wa_xfer_packet_status_len_hwaiso PacketStatus[0]; -} __packed; - -/* [WUSB] section 8.3.3.5 */ -struct wa_xfer_abort { - u8 bLength; - u8 bRequestType; - __le16 wRPipe; /* RPipe index */ - __le32 dwTransferID; /* Host-assigned ID */ -} __packed; - -/** - * WA Transfer Complete notification ([WUSB] section 8.3.3.3) - * - */ -struct wa_notif_xfer { - struct wa_notif_hdr hdr; - u8 bEndpoint; - u8 Reserved; -} __packed; - -/** Transfer result basic codes [WUSB] table 8-15 */ -enum { - WA_XFER_STATUS_SUCCESS, - WA_XFER_STATUS_HALTED, - WA_XFER_STATUS_DATA_BUFFER_ERROR, - WA_XFER_STATUS_BABBLE, - WA_XFER_RESERVED, - WA_XFER_STATUS_NOT_FOUND, - WA_XFER_STATUS_INSUFFICIENT_RESOURCE, - WA_XFER_STATUS_TRANSACTION_ERROR, - WA_XFER_STATUS_ABORTED, - WA_XFER_STATUS_RPIPE_NOT_READY, - WA_XFER_INVALID_FORMAT, - WA_XFER_UNEXPECTED_SEGMENT_NUMBER, - WA_XFER_STATUS_RPIPE_TYPE_MISMATCH, -}; - -/** [WUSB] section 8.3.3.4 */ -struct wa_xfer_result { - struct wa_notif_hdr hdr; - __le32 dwTransferID; - __le32 dwTransferLength; - u8 bTransferSegment; - u8 bTransferStatus; - __le32 dwNumOfPackets; -} __packed; - -/** - * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7). - * - * NOTE: u16 fields are read Little Endian from the hardware. - * - * @bNumPorts is the original max number of devices that the host can - * connect; we might chop this so the stack can handle - * it. In case you need to access it, use wusbhc->ports_max - * if it is a Wireless USB WA. - */ -struct usb_wa_descriptor { - u8 bLength; - u8 bDescriptorType; - __le16 bcdWAVersion; - u8 bNumPorts; /* don't use!! */ - u8 bmAttributes; /* Reserved == 0 */ - __le16 wNumRPipes; - __le16 wRPipeMaxBlock; - u8 bRPipeBlockSize; - u8 bPwrOn2PwrGood; - u8 bNumMMCIEs; - u8 DeviceRemovable; /* FIXME: in DWA this is up to 16 bytes */ -} __packed; - -/** - * HWA Device Information Buffer (WUSB1.0[T8.54]) - */ -struct hwa_dev_info { - u8 bmDeviceAvailability[32]; /* FIXME: ignored for now */ - u8 bDeviceAddress; - __le16 wPHYRates; - u8 bmDeviceAttribute; -} __packed; - -#endif /* #ifndef __LINUX_USB_WUSB_WA_H */ diff --git a/drivers/staging/wusbcore/include/wusb.h b/drivers/staging/wusbcore/include/wusb.h deleted file mode 100644 index 09771d1da7bc..000000000000 --- a/drivers/staging/wusbcore/include/wusb.h +++ /dev/null @@ -1,362 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Standard Definitions - * Event Size Tables - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - * FIXME: organize properly, group logically - * - * All the event structures are defined in uwb/spec.h, as they are - * common to the WHCI and WUSB radio control interfaces. - */ - -#ifndef __WUSB_H__ -#define __WUSB_H__ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/usb/ch9.h> -#include <linux/param.h> -#include "../../uwb/include/spec.h" - -/** - * WUSB Information Element header - * - * I don't know why, they decided to make it different to the MBOA MAC - * IE Header; beats me. - */ -struct wuie_hdr { - u8 bLength; - u8 bIEIdentifier; -} __attribute__((packed)); - -enum { - WUIE_ID_WCTA = 0x80, - WUIE_ID_CONNECTACK, - WUIE_ID_HOST_INFO, - WUIE_ID_CHANGE_ANNOUNCE, - WUIE_ID_DEVICE_DISCONNECT, - WUIE_ID_HOST_DISCONNECT, - WUIE_ID_KEEP_ALIVE = 0x89, - WUIE_ID_ISOCH_DISCARD, - WUIE_ID_RESET_DEVICE, -}; - -/** - * Maximum number of array elements in a WUSB IE. - * - * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that - * are "arrays" have to limited to 4 elements. So we define it - * like that to ease up and submit only the neeed size. - */ -#define WUIE_ELT_MAX 4 - -/** - * Wrapper for the data that defines a CHID, a CDID or a CK - * - * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of - * data. In order to avoid confusion and enforce types, we wrap it. - * - * Make it packed, as we use it in some hw definitions. - */ -struct wusb_ckhdid { - u8 data[16]; -} __attribute__((packed)); - -static const struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } }; - -#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1) - -/** - * WUSB IE: Host Information (WUSB1.0[7.5.2]) - * - * Used to provide information about the host to the Wireless USB - * devices in range (CHID can be used as an ASCII string). - */ -struct wuie_host_info { - struct wuie_hdr hdr; - __le16 attributes; - struct wusb_ckhdid CHID; -} __attribute__((packed)); - -/** - * WUSB IE: Connect Ack (WUSB1.0[7.5.1]) - * - * Used to acknowledge device connect requests. See note for - * WUIE_ELT_MAX. - */ -struct wuie_connect_ack { - struct wuie_hdr hdr; - struct { - struct wusb_ckhdid CDID; - u8 bDeviceAddress; /* 0 means unused */ - u8 bReserved; - } blk[WUIE_ELT_MAX]; -} __attribute__((packed)); - -/** - * WUSB IE Host Information Element, Connect Availability - * - * WUSB1.0[7.5.2], bmAttributes description - */ -enum { - WUIE_HI_CAP_RECONNECT = 0, - WUIE_HI_CAP_LIMITED, - WUIE_HI_CAP_RESERVED, - WUIE_HI_CAP_ALL, -}; - -/** - * WUSB IE: Channel Stop (WUSB1.0[7.5.8]) - * - * Tells devices the host is going to stop sending MMCs and will disappear. - */ -struct wuie_channel_stop { - struct wuie_hdr hdr; - u8 attributes; - u8 timestamp[3]; -} __attribute__((packed)); - -/** - * WUSB IE: Keepalive (WUSB1.0[7.5.9]) - * - * Ask device(s) to send keepalives. - */ -struct wuie_keep_alive { - struct wuie_hdr hdr; - u8 bDeviceAddress[WUIE_ELT_MAX]; -} __attribute__((packed)); - -/** - * WUSB IE: Reset device (WUSB1.0[7.5.11]) - * - * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only - * use it for one at the time... - * - * In any case, this request is a wee bit silly: why don't they target - * by address?? - */ -struct wuie_reset { - struct wuie_hdr hdr; - struct wusb_ckhdid CDID; -} __attribute__((packed)); - -/** - * WUSB IE: Disconnect device (WUSB1.0[7.5.11]) - * - * Tell device to disconnect; we can fit 4 addresses, but we only use - * it for one at the time... - */ -struct wuie_disconnect { - struct wuie_hdr hdr; - u8 bDeviceAddress; - u8 padding; -} __attribute__((packed)); - -/** - * WUSB IE: Host disconnect ([WUSB] section 7.5.5) - * - * Tells all connected devices to disconnect. - */ -struct wuie_host_disconnect { - struct wuie_hdr hdr; -} __attribute__((packed)); - -/** - * WUSB Device Notification header (WUSB1.0[7.6]) - */ -struct wusb_dn_hdr { - u8 bType; - u8 notifdata[]; -} __attribute__((packed)); - -/** Device Notification codes (WUSB1.0[Table 7-54]) */ -enum WUSB_DN { - WUSB_DN_CONNECT = 0x01, - WUSB_DN_DISCONNECT = 0x02, - WUSB_DN_EPRDY = 0x03, - WUSB_DN_MASAVAILCHANGED = 0x04, - WUSB_DN_RWAKE = 0x05, - WUSB_DN_SLEEP = 0x06, - WUSB_DN_ALIVE = 0x07, -}; - -/** WUSB Device Notification Connect */ -struct wusb_dn_connect { - struct wusb_dn_hdr hdr; - __le16 attributes; - struct wusb_ckhdid CDID; -} __attribute__((packed)); - -static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn) -{ - return le16_to_cpu(dn->attributes) & 0xff; -} - -static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn) -{ - return (le16_to_cpu(dn->attributes) >> 8) & 0x1; -} - -static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn) -{ - return (le16_to_cpu(dn->attributes) >> 9) & 0x03; -} - -/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */ -struct wusb_dn_alive { - struct wusb_dn_hdr hdr; -} __attribute__((packed)); - -/** Device is disconnecting (WUSB1.0[7.6.2]) */ -struct wusb_dn_disconnect { - struct wusb_dn_hdr hdr; -} __attribute__((packed)); - -/* General constants */ -enum { - WUSB_TRUST_TIMEOUT_MS = 4000, /* [WUSB] section 4.15.1 */ -}; - -/* - * WUSB Crypto stuff (WUSB1.0[6]) - */ - -extern const char *wusb_et_name(u8); - -/** - * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for - * the host or the device. - */ -static inline u8 wusb_key_index(int index, int type, int originator) -{ - return (originator << 6) | (type << 4) | index; -} - -#define WUSB_KEY_INDEX_TYPE_PTK 0 /* for HWA only */ -#define WUSB_KEY_INDEX_TYPE_ASSOC 1 -#define WUSB_KEY_INDEX_TYPE_GTK 2 -#define WUSB_KEY_INDEX_ORIGINATOR_HOST 0 -#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE 1 -/* bits 0-3 used for the key index. */ -#define WUSB_KEY_INDEX_MAX 15 - -/* A CCM Nonce, defined in WUSB1.0[6.4.1] */ -struct aes_ccm_nonce { - u8 sfn[6]; /* Little Endian */ - u8 tkid[3]; /* LE */ - struct uwb_dev_addr dest_addr; - struct uwb_dev_addr src_addr; -} __attribute__((packed)); - -/* A CCM operation label, defined on WUSB1.0[6.5.x] */ -struct aes_ccm_label { - u8 data[14]; -} __attribute__((packed)); - -/* - * Input to the key derivation sequence defined in - * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the - * PRF function. - */ -struct wusb_keydvt_in { - u8 hnonce[16]; - u8 dnonce[16]; -} __attribute__((packed)); - -/* - * Output from the key derivation sequence defined in - * WUSB1.0[6.5.1]. - */ -struct wusb_keydvt_out { - u8 kck[16]; - u8 ptk[16]; -} __attribute__((packed)); - -/* Pseudo Random Function WUSB1.0[6.5] */ -extern int wusb_crypto_init(void); -extern void wusb_crypto_exit(void); -extern ssize_t wusb_prf(void *out, size_t out_size, - const u8 key[16], const struct aes_ccm_nonce *_n, - const struct aes_ccm_label *a, - const void *b, size_t blen, size_t len); - -static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16], - const struct aes_ccm_nonce *n, - const struct aes_ccm_label *a, - const void *b, size_t blen) -{ - return wusb_prf(out, out_size, key, n, a, b, blen, 64); -} - -static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16], - const struct aes_ccm_nonce *n, - const struct aes_ccm_label *a, - const void *b, size_t blen) -{ - return wusb_prf(out, out_size, key, n, a, b, blen, 128); -} - -static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16], - const struct aes_ccm_nonce *n, - const struct aes_ccm_label *a, - const void *b, size_t blen) -{ - return wusb_prf(out, out_size, key, n, a, b, blen, 256); -} - -/* Key derivation WUSB1.0[6.5.1] */ -static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out, - const u8 key[16], - const struct aes_ccm_nonce *n, - const struct wusb_keydvt_in *keydvt_in) -{ - const struct aes_ccm_label a = { .data = "Pair-wise keys" }; - return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a, - keydvt_in, sizeof(*keydvt_in)); -} - -/* - * Out-of-band MIC Generation WUSB1.0[6.5.2] - * - * Compute the MIC over @key, @n and @hs and place it in @mic_out. - * - * @mic_out: Where to place the 8 byte MIC tag - * @key: KCK from the derivation process - * @n: CCM nonce, n->sfn == 0, TKID as established in the - * process. - * @hs: Handshake struct for phase 2 of the 4-way. - * hs->bStatus and hs->bReserved are zero. - * hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2] - * hs->dest_addr is the device's USB address padded with 0 - * hs->src_addr is the hosts's UWB device address - * hs->mic is ignored (as we compute that value). - */ -static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16], - const struct aes_ccm_nonce *n, - const struct usb_handshake *hs) -{ - const struct aes_ccm_label a = { .data = "out-of-bandMIC" }; - return wusb_prf_64(mic_out, 8, key, n, &a, - hs, sizeof(*hs) - sizeof(hs->MIC)); -} - -#endif /* #ifndef __WUSB_H__ */ diff --git a/drivers/staging/wusbcore/mmc.c b/drivers/staging/wusbcore/mmc.c deleted file mode 100644 index 881e1f20d718..000000000000 --- a/drivers/staging/wusbcore/mmc.c +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) - * MMC (Microscheduled Management Command) handling - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * WUIEs and MMC IEs...well, they are almost the same at the end. MMC - * IEs are Wireless USB IEs that go into the MMC period...[what is - * that? look in Design-overview.txt]. - * - * - * This is a simple subsystem to keep track of which IEs are being - * sent by the host in the MMC period. - * - * For each WUIE we ask to send, we keep it in an array, so we can - * request its removal later, or replace the content. They are tracked - * by pointer, so be sure to use the same pointer if you want to - * remove it or update the contents. - * - * FIXME: - * - add timers that autoremove intervalled IEs? - */ -#include <linux/slab.h> -#include <linux/export.h> -#include "include/wusb.h" -#include "wusbhc.h" - -/* Initialize the MMCIEs handling mechanism */ -int wusbhc_mmcie_create(struct wusbhc *wusbhc) -{ - u8 mmcies = wusbhc->mmcies_max; - wusbhc->mmcie = kcalloc(mmcies, sizeof(wusbhc->mmcie[0]), GFP_KERNEL); - if (wusbhc->mmcie == NULL) - return -ENOMEM; - mutex_init(&wusbhc->mmcie_mutex); - return 0; -} - -/* Release resources used by the MMCIEs handling mechanism */ -void wusbhc_mmcie_destroy(struct wusbhc *wusbhc) -{ - kfree(wusbhc->mmcie); -} - -/* - * Add or replace an MMC Wireless USB IE. - * - * @interval: See WUSB1.0[8.5.3.1] - * @repeat_cnt: See WUSB1.0[8.5.3.1] - * @handle: See WUSB1.0[8.5.3.1] - * @wuie: Pointer to the header of the WUSB IE data to add. - * MUST BE allocated in a kmalloc buffer (no stack or - * vmalloc). - * THE CALLER ALWAYS OWNS THE POINTER (we don't free it - * on remove, we just forget about it). - * @returns: 0 if ok, < 0 errno code on error. - * - * Goes over the *whole* @wusbhc->mmcie array looking for (a) the - * first free spot and (b) if @wuie is already in the array (aka: - * transmitted in the MMCs) the spot were it is. - * - * If present, we "overwrite it" (update). - * - * - * NOTE: Need special ordering rules -- see below WUSB1.0 Table 7-38. - * The host uses the handle as the 'sort' index. We - * allocate the last one always for the WUIE_ID_HOST_INFO, and - * the rest, first come first serve in inverse order. - * - * Host software must make sure that it adds the other IEs in - * the right order... the host hardware is responsible for - * placing the WCTA IEs in the right place with the other IEs - * set by host software. - * - * NOTE: we can access wusbhc->wa_descr without locking because it is - * read only. - */ -int wusbhc_mmcie_set(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - struct wuie_hdr *wuie) -{ - int result = -ENOBUFS; - unsigned handle, itr; - - /* Search a handle, taking into account the ordering */ - mutex_lock(&wusbhc->mmcie_mutex); - switch (wuie->bIEIdentifier) { - case WUIE_ID_HOST_INFO: - /* Always last */ - handle = wusbhc->mmcies_max - 1; - break; - case WUIE_ID_ISOCH_DISCARD: - dev_err(wusbhc->dev, "Special ordering case for WUIE ID 0x%x " - "unimplemented\n", wuie->bIEIdentifier); - result = -ENOSYS; - goto error_unlock; - default: - /* search for it or find the last empty slot */ - handle = ~0; - for (itr = 0; itr < wusbhc->mmcies_max - 1; itr++) { - if (wusbhc->mmcie[itr] == wuie) { - handle = itr; - break; - } - if (wusbhc->mmcie[itr] == NULL) - handle = itr; - } - if (handle == ~0) - goto error_unlock; - } - result = (wusbhc->mmcie_add)(wusbhc, interval, repeat_cnt, handle, - wuie); - if (result >= 0) - wusbhc->mmcie[handle] = wuie; -error_unlock: - mutex_unlock(&wusbhc->mmcie_mutex); - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_mmcie_set); - -/* - * Remove an MMC IE previously added with wusbhc_mmcie_set() - * - * @wuie Pointer used to add the WUIE - */ -void wusbhc_mmcie_rm(struct wusbhc *wusbhc, struct wuie_hdr *wuie) -{ - int result; - unsigned handle, itr; - - mutex_lock(&wusbhc->mmcie_mutex); - for (itr = 0; itr < wusbhc->mmcies_max; itr++) { - if (wusbhc->mmcie[itr] == wuie) { - handle = itr; - goto found; - } - } - mutex_unlock(&wusbhc->mmcie_mutex); - return; - -found: - result = (wusbhc->mmcie_rm)(wusbhc, handle); - if (result == 0) - wusbhc->mmcie[itr] = NULL; - mutex_unlock(&wusbhc->mmcie_mutex); -} -EXPORT_SYMBOL_GPL(wusbhc_mmcie_rm); - -static int wusbhc_mmc_start(struct wusbhc *wusbhc) -{ - int ret; - - mutex_lock(&wusbhc->mutex); - ret = wusbhc->start(wusbhc); - if (ret >= 0) - wusbhc->active = 1; - mutex_unlock(&wusbhc->mutex); - - return ret; -} - -static void wusbhc_mmc_stop(struct wusbhc *wusbhc) -{ - mutex_lock(&wusbhc->mutex); - wusbhc->active = 0; - wusbhc->stop(wusbhc, WUSB_CHANNEL_STOP_DELAY_MS); - mutex_unlock(&wusbhc->mutex); -} - -/* - * wusbhc_start - start transmitting MMCs and accepting connections - * @wusbhc: the HC to start - * - * Establishes a cluster reservation, enables device connections, and - * starts MMCs with appropriate DNTS parameters. - */ -int wusbhc_start(struct wusbhc *wusbhc) -{ - int result; - struct device *dev = wusbhc->dev; - - WARN_ON(wusbhc->wuie_host_info != NULL); - BUG_ON(wusbhc->uwb_rc == NULL); - - result = wusbhc_rsv_establish(wusbhc); - if (result < 0) { - dev_err(dev, "cannot establish cluster reservation: %d\n", - result); - goto error_rsv_establish; - } - - result = wusbhc_devconnect_start(wusbhc); - if (result < 0) { - dev_err(dev, "error enabling device connections: %d\n", - result); - goto error_devconnect_start; - } - - result = wusbhc_sec_start(wusbhc); - if (result < 0) { - dev_err(dev, "error starting security in the HC: %d\n", - result); - goto error_sec_start; - } - - result = wusbhc->set_num_dnts(wusbhc, wusbhc->dnts_interval, - wusbhc->dnts_num_slots); - if (result < 0) { - dev_err(dev, "Cannot set DNTS parameters: %d\n", result); - goto error_set_num_dnts; - } - result = wusbhc_mmc_start(wusbhc); - if (result < 0) { - dev_err(dev, "error starting wusbch: %d\n", result); - goto error_wusbhc_start; - } - - return 0; - -error_wusbhc_start: - wusbhc_sec_stop(wusbhc); -error_set_num_dnts: -error_sec_start: - wusbhc_devconnect_stop(wusbhc); -error_devconnect_start: - wusbhc_rsv_terminate(wusbhc); -error_rsv_establish: - return result; -} - -/* - * wusbhc_stop - stop transmitting MMCs - * @wusbhc: the HC to stop - * - * Stops the WUSB channel and removes the cluster reservation. - */ -void wusbhc_stop(struct wusbhc *wusbhc) -{ - wusbhc_mmc_stop(wusbhc); - wusbhc_sec_stop(wusbhc); - wusbhc_devconnect_stop(wusbhc); - wusbhc_rsv_terminate(wusbhc); -} - -/* - * Set/reset/update a new CHID - * - * Depending on the previous state of the MMCs, start, stop or change - * the sent MMC. This effectively switches the host controller on and - * off (radio wise). - */ -int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) -{ - int result = 0; - - if (memcmp(chid, &wusb_ckhdid_zero, sizeof(*chid)) == 0) - chid = NULL; - - mutex_lock(&wusbhc->mutex); - if (chid) { - if (wusbhc->active) { - mutex_unlock(&wusbhc->mutex); - return -EBUSY; - } - wusbhc->chid = *chid; - } - - /* register with UWB if we haven't already since we are about to start - the radio. */ - if ((chid) && (wusbhc->uwb_rc == NULL)) { - wusbhc->uwb_rc = uwb_rc_get_by_grandpa(wusbhc->dev->parent); - if (wusbhc->uwb_rc == NULL) { - result = -ENODEV; - dev_err(wusbhc->dev, - "Cannot get associated UWB Host Controller\n"); - goto error_rc_get; - } - - result = wusbhc_pal_register(wusbhc); - if (result < 0) { - dev_err(wusbhc->dev, "Cannot register as a UWB PAL\n"); - goto error_pal_register; - } - } - mutex_unlock(&wusbhc->mutex); - - if (chid) - result = uwb_radio_start(&wusbhc->pal); - else if (wusbhc->uwb_rc) - uwb_radio_stop(&wusbhc->pal); - - return result; - -error_pal_register: - uwb_rc_put(wusbhc->uwb_rc); - wusbhc->uwb_rc = NULL; -error_rc_get: - mutex_unlock(&wusbhc->mutex); - - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_chid_set); diff --git a/drivers/staging/wusbcore/pal.c b/drivers/staging/wusbcore/pal.c deleted file mode 100644 index 30f569131471..000000000000 --- a/drivers/staging/wusbcore/pal.c +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * UWB Protocol Adaptation Layer (PAL) glue. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include "wusbhc.h" - -static void wusbhc_channel_changed(struct uwb_pal *pal, int channel) -{ - struct wusbhc *wusbhc = container_of(pal, struct wusbhc, pal); - - dev_dbg(wusbhc->dev, "%s: channel = %d\n", __func__, channel); - if (channel < 0) - wusbhc_stop(wusbhc); - else - wusbhc_start(wusbhc); -} - -/** - * wusbhc_pal_register - register the WUSB HC as a UWB PAL - * @wusbhc: the WUSB HC - */ -int wusbhc_pal_register(struct wusbhc *wusbhc) -{ - uwb_pal_init(&wusbhc->pal); - - wusbhc->pal.name = "wusbhc"; - wusbhc->pal.device = wusbhc->usb_hcd.self.controller; - wusbhc->pal.rc = wusbhc->uwb_rc; - wusbhc->pal.channel_changed = wusbhc_channel_changed; - - return uwb_pal_register(&wusbhc->pal); -} - -/** - * wusbhc_pal_unregister - unregister the WUSB HC as a UWB PAL - * @wusbhc: the WUSB HC - */ -void wusbhc_pal_unregister(struct wusbhc *wusbhc) -{ - if (wusbhc->uwb_rc) - uwb_pal_unregister(&wusbhc->pal); -} diff --git a/drivers/staging/wusbcore/reservation.c b/drivers/staging/wusbcore/reservation.c deleted file mode 100644 index b921faac698b..000000000000 --- a/drivers/staging/wusbcore/reservation.c +++ /dev/null @@ -1,110 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB cluster reservation management - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> - -#include "../uwb/uwb.h" -#include "wusbhc.h" - -/* - * WUSB cluster reservations are multicast reservations with the - * broadcast cluster ID (BCID) as the target DevAddr. - * - * FIXME: consider adjusting the reservation depending on what devices - * are attached. - */ - -static int wusbhc_bwa_set(struct wusbhc *wusbhc, u8 stream, - const struct uwb_mas_bm *mas) -{ - if (mas == NULL) - mas = &uwb_mas_bm_zero; - return wusbhc->bwa_set(wusbhc, stream, mas); -} - -/** - * wusbhc_rsv_complete_cb - WUSB HC reservation complete callback - * @rsv: the reservation - * - * Either set or clear the HC's view of the reservation. - * - * FIXME: when a reservation is denied the HC should be stopped. - */ -static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv) -{ - struct wusbhc *wusbhc = rsv->pal_priv; - struct device *dev = wusbhc->dev; - struct uwb_mas_bm mas; - - dev_dbg(dev, "%s: state = %d\n", __func__, rsv->state); - switch (rsv->state) { - case UWB_RSV_STATE_O_ESTABLISHED: - uwb_rsv_get_usable_mas(rsv, &mas); - dev_dbg(dev, "established reservation: %*pb\n", - UWB_NUM_MAS, mas.bm); - wusbhc_bwa_set(wusbhc, rsv->stream, &mas); - break; - case UWB_RSV_STATE_NONE: - dev_dbg(dev, "removed reservation\n"); - wusbhc_bwa_set(wusbhc, 0, NULL); - break; - default: - dev_dbg(dev, "unexpected reservation state: %d\n", rsv->state); - break; - } -} - - -/** - * wusbhc_rsv_establish - establish a reservation for the cluster - * @wusbhc: the WUSB HC requesting a bandwidth reservation - */ -int wusbhc_rsv_establish(struct wusbhc *wusbhc) -{ - struct uwb_rc *rc = wusbhc->uwb_rc; - struct uwb_rsv *rsv; - struct uwb_dev_addr bcid; - int ret; - - if (rc == NULL) - return -ENODEV; - - rsv = uwb_rsv_create(rc, wusbhc_rsv_complete_cb, wusbhc); - if (rsv == NULL) - return -ENOMEM; - - bcid.data[0] = wusbhc->cluster_id; - bcid.data[1] = 0; - - rsv->target.type = UWB_RSV_TARGET_DEVADDR; - rsv->target.devaddr = bcid; - rsv->type = UWB_DRP_TYPE_PRIVATE; - rsv->max_mas = 256; /* try to get as much as possible */ - rsv->min_mas = 15; /* one MAS per zone */ - rsv->max_interval = 1; /* max latency is one zone */ - rsv->is_multicast = true; - - ret = uwb_rsv_establish(rsv); - if (ret == 0) - wusbhc->rsv = rsv; - else - uwb_rsv_destroy(rsv); - return ret; -} - - -/** - * wusbhc_rsv_terminate - terminate the cluster reservation - * @wusbhc: the WUSB host whose reservation is to be terminated - */ -void wusbhc_rsv_terminate(struct wusbhc *wusbhc) -{ - if (wusbhc->rsv) { - uwb_rsv_terminate(wusbhc->rsv); - uwb_rsv_destroy(wusbhc->rsv); - wusbhc->rsv = NULL; - } -} diff --git a/drivers/staging/wusbcore/rh.c b/drivers/staging/wusbcore/rh.c deleted file mode 100644 index 20c08cd9dcbf..000000000000 --- a/drivers/staging/wusbcore/rh.c +++ /dev/null @@ -1,426 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * Root Hub operations - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * We fake a root hub that has fake ports (as many as simultaneous - * devices the Wireless USB Host Controller can deal with). For each - * port we keep an state in @wusbhc->port[index] identical to the one - * specified in the USB2.0[ch11] spec and some extra device - * information that complements the one in 'struct usb_device' (as - * this lacs a hcpriv pointer). - * - * Note this is common to WHCI and HWA host controllers. - * - * Through here we enable most of the state changes that the USB stack - * will use to connect or disconnect devices. We need to do some - * forced adaptation of Wireless USB device states vs. wired: - * - * USB: WUSB: - * - * Port Powered-off port slot n/a - * Powered-on port slot available - * Disconnected port slot available - * Connected port slot assigned device - * device sent DN_Connect - * device was authenticated - * Enabled device is authenticated, transitioned - * from unauth -> auth -> default address - * -> enabled - * Reset disconnect - * Disable disconnect - * - * This maps the standard USB port states with the WUSB device states - * so we can fake ports without having to modify the USB stack. - * - * FIXME: this process will change in the future - * - * - * ENTRY POINTS - * - * Our entry points into here are, as in hcd.c, the USB stack root hub - * ops defined in the usb_hcd struct: - * - * wusbhc_rh_status_data() Provide hub and port status data bitmap - * - * wusbhc_rh_control() Execution of all the major requests - * you can do to a hub (Set|Clear - * features, get descriptors, status, etc). - * - * wusbhc_rh_[suspend|resume]() That - * - * wusbhc_rh_start_port_reset() ??? unimplemented - */ -#include <linux/slab.h> -#include <linux/export.h> -#include "wusbhc.h" - -/* - * Reset a fake port - * - * Using a Reset Device IE is too heavyweight as it causes the device - * to enter the UnConnected state and leave the cluster, this can mean - * that when the device reconnects it is connected to a different fake - * port. - * - * Instead, reset authenticated devices with a SetAddress(0), followed - * by a SetAddresss(AuthAddr). - * - * For unauthenticated devices just pretend to reset but do nothing. - * If the device initialization continues to fail it will eventually - * time out after TrustTimeout and enter the UnConnected state. - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * Supposedly we are the only thread accesing @wusbhc->port; in any - * case, maybe we should move the mutex locking from - * wusbhc_devconnect_auth() to here. - * - * @port_idx refers to the wusbhc's port index, not the USB port number - */ -static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) -{ - int result = 0; - struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); - struct wusb_dev *wusb_dev = port->wusb_dev; - - if (wusb_dev == NULL) - return -ENOTCONN; - - port->status |= USB_PORT_STAT_RESET; - port->change |= USB_PORT_STAT_C_RESET; - - if (wusb_dev->addr & WUSB_DEV_ADDR_UNAUTH) - result = 0; - else - result = wusb_dev_update_address(wusbhc, wusb_dev); - - port->status &= ~USB_PORT_STAT_RESET; - port->status |= USB_PORT_STAT_ENABLE; - port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE; - - return result; -} - -/* - * Return the hub change status bitmap - * - * The bits in the change status bitmap are cleared when a - * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4]. - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * WARNING!! This gets called from atomic context; we cannot get the - * mutex--the only race condition we can find is some bit - * changing just after we copy it, which shouldn't be too - * big of a problem [and we can't make it an spinlock - * because other parts need to take it and sleep] . - * - * @usb_hcd is refcounted, so it won't disappear under us - * and before killing a host, the polling of the root hub - * would be stopped anyway. - */ -int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - size_t cnt, size, bits_set = 0; - - /* WE DON'T LOCK, see comment */ - /* round up to bytes. Hub bit is bit 0 so add 1. */ - size = DIV_ROUND_UP(wusbhc->ports_max + 1, 8); - - /* clear the output buffer. */ - memset(_buf, 0, size); - /* set the bit for each changed port. */ - for (cnt = 0; cnt < wusbhc->ports_max; cnt++) { - - if (wusb_port_by_idx(wusbhc, cnt)->change) { - const int bitpos = cnt+1; - - _buf[bitpos/8] |= (1 << (bitpos % 8)); - bits_set++; - } - } - - return bits_set ? size : 0; -} -EXPORT_SYMBOL_GPL(wusbhc_rh_status_data); - -/* - * Return the hub's descriptor - * - * NOTE: almost cut and paste from ehci-hub.c - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked - */ -static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, - u16 wIndex, - struct usb_hub_descriptor *descr, - u16 wLength) -{ - u16 temp = 1 + (wusbhc->ports_max / 8); - u8 length = 7 + 2 * temp; - - if (wLength < length) - return -ENOSPC; - descr->bDescLength = 7 + 2 * temp; - descr->bDescriptorType = USB_DT_HUB; /* HUB type */ - descr->bNbrPorts = wusbhc->ports_max; - descr->wHubCharacteristics = cpu_to_le16( - HUB_CHAR_COMMON_LPSM /* All ports power at once */ - | 0x00 /* not part of compound device */ - | HUB_CHAR_NO_OCPM /* No overcurrent protection */ - | 0x00 /* 8 FS think time FIXME ?? */ - | 0x00); /* No port indicators */ - descr->bPwrOn2PwrGood = 0; - descr->bHubContrCurrent = 0; - /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset(&descr->u.hs.DeviceRemovable[0], 0, temp); - memset(&descr->u.hs.DeviceRemovable[temp], 0xff, temp); - return 0; -} - -/* - * Clear a hub feature - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * Nothing to do, so no locking needed ;) - */ -static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature) -{ - int result; - - switch (feature) { - case C_HUB_LOCAL_POWER: - /* FIXME: maybe plug bit 0 to the power input status, - * if any? - * see wusbhc_rh_get_hub_status() */ - case C_HUB_OVER_CURRENT: - result = 0; - break; - default: - result = -EPIPE; - } - return result; -} - -/* - * Return hub status (it is always zero...) - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * Nothing to do, so no locking needed ;) - */ -static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf, - u16 wLength) -{ - /* FIXME: maybe plug bit 0 to the power input status (if any)? */ - *buf = 0; - return 0; -} - -/* - * Set a port feature - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature, - u8 selector, u8 port_idx) -{ - struct device *dev = wusbhc->dev; - - if (port_idx > wusbhc->ports_max) - return -EINVAL; - - switch (feature) { - /* According to USB2.0[11.24.2.13]p2, these features - * are not required to be implemented. */ - case USB_PORT_FEAT_C_OVER_CURRENT: - case USB_PORT_FEAT_C_ENABLE: - case USB_PORT_FEAT_C_SUSPEND: - case USB_PORT_FEAT_C_CONNECTION: - case USB_PORT_FEAT_C_RESET: - return 0; - case USB_PORT_FEAT_POWER: - /* No such thing, but we fake it works */ - mutex_lock(&wusbhc->mutex); - wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER; - mutex_unlock(&wusbhc->mutex); - return 0; - case USB_PORT_FEAT_RESET: - return wusbhc_rh_port_reset(wusbhc, port_idx); - case USB_PORT_FEAT_ENABLE: - case USB_PORT_FEAT_SUSPEND: - dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n", - port_idx, feature, selector); - return -ENOSYS; - default: - dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n", - port_idx, feature, selector); - return -EPIPE; - } - - return 0; -} - -/* - * Clear a port feature... - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature, - u8 selector, u8 port_idx) -{ - int result = 0; - struct device *dev = wusbhc->dev; - - if (port_idx > wusbhc->ports_max) - return -EINVAL; - - mutex_lock(&wusbhc->mutex); - switch (feature) { - case USB_PORT_FEAT_POWER: /* fake port always on */ - /* According to USB2.0[11.24.2.7.1.4], no need to implement? */ - case USB_PORT_FEAT_C_OVER_CURRENT: - break; - case USB_PORT_FEAT_C_RESET: - wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET; - break; - case USB_PORT_FEAT_C_CONNECTION: - wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION; - break; - case USB_PORT_FEAT_ENABLE: - __wusbhc_dev_disable(wusbhc, port_idx); - break; - case USB_PORT_FEAT_C_ENABLE: - wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE; - break; - case USB_PORT_FEAT_SUSPEND: - case USB_PORT_FEAT_C_SUSPEND: - dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n", - port_idx, feature, selector); - result = -ENOSYS; - break; - default: - dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n", - port_idx, feature, selector); - result = -EPIPE; - break; - } - mutex_unlock(&wusbhc->mutex); - - return result; -} - -/* - * Return the port's status - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx, - u32 *_buf, u16 wLength) -{ - __le16 *buf = (__le16 *)_buf; - - if (port_idx > wusbhc->ports_max) - return -EINVAL; - - mutex_lock(&wusbhc->mutex); - buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status); - buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change); - mutex_unlock(&wusbhc->mutex); - - return 0; -} - -/* - * Entry point for Root Hub operations - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue, - u16 wIndex, char *buf, u16 wLength) -{ - int result = -ENOSYS; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - - switch (reqntype) { - case GetHubDescriptor: - result = wusbhc_rh_get_hub_descr( - wusbhc, wValue, wIndex, - (struct usb_hub_descriptor *) buf, wLength); - break; - case ClearHubFeature: - result = wusbhc_rh_clear_hub_feat(wusbhc, wValue); - break; - case GetHubStatus: - result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength); - break; - - case SetPortFeature: - result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8, - (wIndex & 0xff) - 1); - break; - case ClearPortFeature: - result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8, - (wIndex & 0xff) - 1); - break; - case GetPortStatus: - result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1, - (u32 *)buf, wLength); - break; - - case SetHubFeature: - default: - dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) " - "UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype, - wValue, wIndex, buf, wLength); - /* dump_stack(); */ - result = -ENOSYS; - } - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_rh_control); - -int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n", - __func__, usb_hcd, wusbhc, port_idx); - WARN_ON(1); - return -ENOSYS; -} -EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset); - -static void wusb_port_init(struct wusb_port *port) -{ - port->status |= USB_PORT_STAT_HIGH_SPEED; -} - -/* - * Alloc fake port specific fields and status. - */ -int wusbhc_rh_create(struct wusbhc *wusbhc) -{ - int result = -ENOMEM; - size_t port_size, itr; - port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]); - wusbhc->port = kzalloc(port_size, GFP_KERNEL); - if (wusbhc->port == NULL) - goto error_port_alloc; - for (itr = 0; itr < wusbhc->ports_max; itr++) - wusb_port_init(&wusbhc->port[itr]); - result = 0; -error_port_alloc: - return result; -} - -void wusbhc_rh_destroy(struct wusbhc *wusbhc) -{ - kfree(wusbhc->port); -} diff --git a/drivers/staging/wusbcore/security.c b/drivers/staging/wusbcore/security.c deleted file mode 100644 index 14ac8c98ac9e..000000000000 --- a/drivers/staging/wusbcore/security.c +++ /dev/null @@ -1,599 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * Security support: encryption enablement, etc - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - */ -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/usb/ch9.h> -#include <linux/random.h> -#include <linux/export.h> -#include "wusbhc.h" -#include <asm/unaligned.h> - -static void wusbhc_gtk_rekey_work(struct work_struct *work); - -int wusbhc_sec_create(struct wusbhc *wusbhc) -{ - /* - * WQ is singlethread because we need to serialize rekey operations. - * Use a separate workqueue for security operations instead of the - * wusbd workqueue because security operations may need to communicate - * directly with downstream wireless devices using synchronous URBs. - * If a device is not responding, this could block other host - * controller operations. - */ - wusbhc->wq_security = create_singlethread_workqueue("wusbd_security"); - if (wusbhc->wq_security == NULL) { - pr_err("WUSB-core: Cannot create wusbd_security workqueue\n"); - return -ENOMEM; - } - - wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) + - sizeof(wusbhc->gtk.data); - wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY; - wusbhc->gtk.descr.bReserved = 0; - wusbhc->gtk_index = 0; - - INIT_WORK(&wusbhc->gtk_rekey_work, wusbhc_gtk_rekey_work); - - return 0; -} - - -/* Called when the HC is destroyed */ -void wusbhc_sec_destroy(struct wusbhc *wusbhc) -{ - destroy_workqueue(wusbhc->wq_security); -} - - -/** - * wusbhc_next_tkid - generate a new, currently unused, TKID - * @wusbhc: the WUSB host controller - * @wusb_dev: the device whose PTK the TKID is for - * (or NULL for a TKID for a GTK) - * - * The generated TKID consists of two parts: the device's authenticated - * address (or 0 or a GTK); and an incrementing number. This ensures - * that TKIDs cannot be shared between devices and by the time the - * incrementing number wraps around the older TKIDs will no longer be - * in use (a maximum of two keys may be active at any one time). - */ -static u32 wusbhc_next_tkid(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - u32 *tkid; - u32 addr; - - if (wusb_dev == NULL) { - tkid = &wusbhc->gtk_tkid; - addr = 0; - } else { - tkid = &wusb_port_by_idx(wusbhc, wusb_dev->port_idx)->ptk_tkid; - addr = wusb_dev->addr & 0x7f; - } - - *tkid = (addr << 8) | ((*tkid + 1) & 0xff); - - return *tkid; -} - -static void wusbhc_generate_gtk(struct wusbhc *wusbhc) -{ - const size_t key_size = sizeof(wusbhc->gtk.data); - u32 tkid; - - tkid = wusbhc_next_tkid(wusbhc, NULL); - - wusbhc->gtk.descr.tTKID[0] = (tkid >> 0) & 0xff; - wusbhc->gtk.descr.tTKID[1] = (tkid >> 8) & 0xff; - wusbhc->gtk.descr.tTKID[2] = (tkid >> 16) & 0xff; - - get_random_bytes(wusbhc->gtk.descr.bKeyData, key_size); -} - -/** - * wusbhc_sec_start - start the security management process - * @wusbhc: the WUSB host controller - * - * Generate and set an initial GTK on the host controller. - * - * Called when the HC is started. - */ -int wusbhc_sec_start(struct wusbhc *wusbhc) -{ - const size_t key_size = sizeof(wusbhc->gtk.data); - int result; - - wusbhc_generate_gtk(wusbhc); - - result = wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, - &wusbhc->gtk.descr.bKeyData, key_size); - if (result < 0) - dev_err(wusbhc->dev, "cannot set GTK for the host: %d\n", - result); - - return result; -} - -/** - * wusbhc_sec_stop - stop the security management process - * @wusbhc: the WUSB host controller - * - * Wait for any pending GTK rekeys to stop. - */ -void wusbhc_sec_stop(struct wusbhc *wusbhc) -{ - cancel_work_sync(&wusbhc->gtk_rekey_work); -} - - -/** @returns encryption type name */ -const char *wusb_et_name(u8 x) -{ - switch (x) { - case USB_ENC_TYPE_UNSECURE: return "unsecure"; - case USB_ENC_TYPE_WIRED: return "wired"; - case USB_ENC_TYPE_CCM_1: return "CCM-1"; - case USB_ENC_TYPE_RSA_1: return "RSA-1"; - default: return "unknown"; - } -} -EXPORT_SYMBOL_GPL(wusb_et_name); - -/* - * Set the device encryption method - * - * We tell the device which encryption method to use; we do this when - * setting up the device's security. - */ -static int wusb_dev_set_encryption(struct usb_device *usb_dev, int value) -{ - int result; - struct device *dev = &usb_dev->dev; - struct wusb_dev *wusb_dev = usb_dev->wusb_dev; - - if (value) { - value = wusb_dev->ccm1_etd.bEncryptionValue; - } else { - /* FIXME: should be wusb_dev->etd[UNSECURE].bEncryptionValue */ - value = 0; - } - /* Set device's */ - result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_ENCRYPTION, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - value, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Can't set device's WUSB encryption to " - "%s (value %d): %d\n", - wusb_et_name(wusb_dev->ccm1_etd.bEncryptionType), - wusb_dev->ccm1_etd.bEncryptionValue, result); - return result; -} - -/* - * Set the GTK to be used by a device. - * - * The device must be authenticated. - */ -static int wusb_dev_set_gtk(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - struct usb_device *usb_dev = wusb_dev->usb_dev; - u8 key_index = wusb_key_index(wusbhc->gtk_index, - WUSB_KEY_INDEX_TYPE_GTK, WUSB_KEY_INDEX_ORIGINATOR_HOST); - - return usb_control_msg( - usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_DESCRIPTOR, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - USB_DT_KEY << 8 | key_index, 0, - &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength, - USB_CTRL_SET_TIMEOUT); -} - - -/* FIXME: prototype for adding security */ -int wusb_dev_sec_add(struct wusbhc *wusbhc, - struct usb_device *usb_dev, struct wusb_dev *wusb_dev) -{ - int result, bytes, secd_size; - struct device *dev = &usb_dev->dev; - struct usb_security_descriptor *secd, *new_secd; - const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL; - const void *itr, *top; - char buf[64]; - - secd = kmalloc(sizeof(*secd), GFP_KERNEL); - if (secd == NULL) { - result = -ENOMEM; - goto out; - } - - result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, - 0, secd, sizeof(*secd)); - if (result < (int)sizeof(*secd)) { - dev_err(dev, "Can't read security descriptor or " - "not enough data: %d\n", result); - goto out; - } - secd_size = le16_to_cpu(secd->wTotalLength); - new_secd = krealloc(secd, secd_size, GFP_KERNEL); - if (new_secd == NULL) { - dev_err(dev, - "Can't allocate space for security descriptors\n"); - result = -ENOMEM; - goto out; - } - secd = new_secd; - result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, - 0, secd, secd_size); - if (result < secd_size) { - dev_err(dev, "Can't read security descriptor or " - "not enough data: %d\n", result); - goto out; - } - bytes = 0; - itr = &secd[1]; - top = (void *)secd + result; - while (itr < top) { - etd = itr; - if (top - itr < sizeof(*etd)) { - dev_err(dev, "BUG: bad device security descriptor; " - "not enough data (%zu vs %zu bytes left)\n", - top - itr, sizeof(*etd)); - break; - } - if (etd->bLength < sizeof(*etd)) { - dev_err(dev, "BUG: bad device encryption descriptor; " - "descriptor is too short " - "(%u vs %zu needed)\n", - etd->bLength, sizeof(*etd)); - break; - } - itr += etd->bLength; - bytes += snprintf(buf + bytes, sizeof(buf) - bytes, - "%s (0x%02x/%02x) ", - wusb_et_name(etd->bEncryptionType), - etd->bEncryptionValue, etd->bAuthKeyIndex); - if (etd->bEncryptionType == USB_ENC_TYPE_CCM_1) - ccm1_etd = etd; - } - /* This code only supports CCM1 as of now. */ - /* FIXME: user has to choose which sec mode to use? - * In theory we want CCM */ - if (ccm1_etd == NULL) { - dev_err(dev, "WUSB device doesn't support CCM1 encryption, " - "can't use!\n"); - result = -EINVAL; - goto out; - } - wusb_dev->ccm1_etd = *ccm1_etd; - dev_dbg(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n", - buf, wusb_et_name(ccm1_etd->bEncryptionType), - ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex); - result = 0; -out: - kfree(secd); - return result; -} - -void wusb_dev_sec_rm(struct wusb_dev *wusb_dev) -{ - /* Nothing so far */ -} - -/** - * Update the address of an unauthenticated WUSB device - * - * Once we have successfully authenticated, we take it to addr0 state - * and then to a normal address. - * - * Before the device's address (as known by it) was usb_dev->devnum | - * 0x80 (unauthenticated address). With this we update it to usb_dev->devnum. - */ -int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - int result = -ENOMEM; - struct usb_device *usb_dev = wusb_dev->usb_dev; - struct device *dev = &usb_dev->dev; - u8 new_address = wusb_dev->addr & 0x7F; - - /* Set address 0 */ - result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_ADDRESS, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "auth failed: can't set address 0: %d\n", - result); - goto error_addr0; - } - result = wusb_set_dev_addr(wusbhc, wusb_dev, 0); - if (result < 0) - goto error_addr0; - usb_set_device_state(usb_dev, USB_STATE_DEFAULT); - usb_ep0_reinit(usb_dev); - - /* Set new (authenticated) address. */ - result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_ADDRESS, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - new_address, 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "auth failed: can't set address %u: %d\n", - new_address, result); - goto error_addr; - } - result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address); - if (result < 0) - goto error_addr; - usb_set_device_state(usb_dev, USB_STATE_ADDRESS); - usb_ep0_reinit(usb_dev); - usb_dev->authenticated = 1; -error_addr: -error_addr0: - return result; -} - -/* - * - * - */ -/* FIXME: split and cleanup */ -int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, - struct wusb_ckhdid *ck) -{ - int result = -ENOMEM; - struct usb_device *usb_dev = wusb_dev->usb_dev; - struct device *dev = &usb_dev->dev; - u32 tkid; - struct usb_handshake *hs; - struct aes_ccm_nonce ccm_n; - u8 mic[8]; - struct wusb_keydvt_in keydvt_in; - struct wusb_keydvt_out keydvt_out; - - hs = kcalloc(3, sizeof(hs[0]), GFP_KERNEL); - if (!hs) - goto error_kzalloc; - - /* We need to turn encryption before beginning the 4way - * hshake (WUSB1.0[.3.2.2]) */ - result = wusb_dev_set_encryption(usb_dev, 1); - if (result < 0) - goto error_dev_set_encryption; - - tkid = wusbhc_next_tkid(wusbhc, wusb_dev); - - hs[0].bMessageNumber = 1; - hs[0].bStatus = 0; - put_unaligned_le32(tkid, hs[0].tTKID); - hs[0].bReserved = 0; - memcpy(hs[0].CDID, &wusb_dev->cdid, sizeof(hs[0].CDID)); - get_random_bytes(&hs[0].nonce, sizeof(hs[0].nonce)); - memset(hs[0].MIC, 0, sizeof(hs[0].MIC)); /* Per WUSB1.0[T7-22] */ - - result = usb_control_msg( - usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_HANDSHAKE, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 1, 0, &hs[0], sizeof(hs[0]), USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Handshake1: request failed: %d\n", result); - goto error_hs1; - } - - /* Handshake 2, from the device -- need to verify fields */ - result = usb_control_msg( - usb_dev, usb_rcvctrlpipe(usb_dev, 0), - USB_REQ_GET_HANDSHAKE, - USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 2, 0, &hs[1], sizeof(hs[1]), USB_CTRL_GET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Handshake2: request failed: %d\n", result); - goto error_hs2; - } - - result = -EINVAL; - if (hs[1].bMessageNumber != 2) { - dev_err(dev, "Handshake2 failed: bad message number %u\n", - hs[1].bMessageNumber); - goto error_hs2; - } - if (hs[1].bStatus != 0) { - dev_err(dev, "Handshake2 failed: bad status %u\n", - hs[1].bStatus); - goto error_hs2; - } - if (memcmp(hs[0].tTKID, hs[1].tTKID, sizeof(hs[0].tTKID))) { - dev_err(dev, "Handshake2 failed: TKID mismatch " - "(#1 0x%02x%02x%02x vs #2 0x%02x%02x%02x)\n", - hs[0].tTKID[0], hs[0].tTKID[1], hs[0].tTKID[2], - hs[1].tTKID[0], hs[1].tTKID[1], hs[1].tTKID[2]); - goto error_hs2; - } - if (memcmp(hs[0].CDID, hs[1].CDID, sizeof(hs[0].CDID))) { - dev_err(dev, "Handshake2 failed: CDID mismatch\n"); - goto error_hs2; - } - - /* Setup the CCM nonce */ - memset(&ccm_n.sfn, 0, sizeof(ccm_n.sfn)); /* Per WUSB1.0[6.5.2] */ - put_unaligned_le32(tkid, ccm_n.tkid); - ccm_n.src_addr = wusbhc->uwb_rc->uwb_dev.dev_addr; - ccm_n.dest_addr.data[0] = wusb_dev->addr; - ccm_n.dest_addr.data[1] = 0; - - /* Derive the KCK and PTK from CK, the CCM, H and D nonces */ - memcpy(keydvt_in.hnonce, hs[0].nonce, sizeof(keydvt_in.hnonce)); - memcpy(keydvt_in.dnonce, hs[1].nonce, sizeof(keydvt_in.dnonce)); - result = wusb_key_derive(&keydvt_out, ck->data, &ccm_n, &keydvt_in); - if (result < 0) { - dev_err(dev, "Handshake2 failed: cannot derive keys: %d\n", - result); - goto error_hs2; - } - - /* Compute MIC and verify it */ - result = wusb_oob_mic(mic, keydvt_out.kck, &ccm_n, &hs[1]); - if (result < 0) { - dev_err(dev, "Handshake2 failed: cannot compute MIC: %d\n", - result); - goto error_hs2; - } - - if (memcmp(hs[1].MIC, mic, sizeof(hs[1].MIC))) { - dev_err(dev, "Handshake2 failed: MIC mismatch\n"); - goto error_hs2; - } - - /* Send Handshake3 */ - hs[2].bMessageNumber = 3; - hs[2].bStatus = 0; - put_unaligned_le32(tkid, hs[2].tTKID); - hs[2].bReserved = 0; - memcpy(hs[2].CDID, &wusb_dev->cdid, sizeof(hs[2].CDID)); - memcpy(hs[2].nonce, hs[0].nonce, sizeof(hs[2].nonce)); - result = wusb_oob_mic(hs[2].MIC, keydvt_out.kck, &ccm_n, &hs[2]); - if (result < 0) { - dev_err(dev, "Handshake3 failed: cannot compute MIC: %d\n", - result); - goto error_hs2; - } - - result = usb_control_msg( - usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_HANDSHAKE, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 3, 0, &hs[2], sizeof(hs[2]), USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Handshake3: request failed: %d\n", result); - goto error_hs3; - } - - result = wusbhc->set_ptk(wusbhc, wusb_dev->port_idx, tkid, - keydvt_out.ptk, sizeof(keydvt_out.ptk)); - if (result < 0) - goto error_wusbhc_set_ptk; - - result = wusb_dev_set_gtk(wusbhc, wusb_dev); - if (result < 0) { - dev_err(dev, "Set GTK for device: request failed: %d\n", - result); - goto error_wusbhc_set_gtk; - } - - /* Update the device's address from unauth to auth */ - if (usb_dev->authenticated == 0) { - result = wusb_dev_update_address(wusbhc, wusb_dev); - if (result < 0) - goto error_dev_update_address; - } - result = 0; - dev_info(dev, "device authenticated\n"); - -error_dev_update_address: -error_wusbhc_set_gtk: -error_wusbhc_set_ptk: -error_hs3: -error_hs2: -error_hs1: - memset(hs, 0, 3*sizeof(hs[0])); - memzero_explicit(&keydvt_out, sizeof(keydvt_out)); - memzero_explicit(&keydvt_in, sizeof(keydvt_in)); - memzero_explicit(&ccm_n, sizeof(ccm_n)); - memzero_explicit(mic, sizeof(mic)); - if (result < 0) - wusb_dev_set_encryption(usb_dev, 0); -error_dev_set_encryption: - kfree(hs); -error_kzalloc: - return result; -} - -/* - * Once all connected and authenticated devices have received the new - * GTK, switch the host to using it. - */ -static void wusbhc_gtk_rekey_work(struct work_struct *work) -{ - struct wusbhc *wusbhc = container_of(work, - struct wusbhc, gtk_rekey_work); - size_t key_size = sizeof(wusbhc->gtk.data); - int port_idx; - struct wusb_dev *wusb_dev, *wusb_dev_next; - LIST_HEAD(rekey_list); - - mutex_lock(&wusbhc->mutex); - /* generate the new key */ - wusbhc_generate_gtk(wusbhc); - /* roll the gtk index. */ - wusbhc->gtk_index = (wusbhc->gtk_index + 1) % (WUSB_KEY_INDEX_MAX + 1); - /* - * Save all connected devices on a list while holding wusbhc->mutex and - * take a reference to each one. Then submit the set key request to - * them after releasing the lock in order to avoid a deadlock. - */ - for (port_idx = 0; port_idx < wusbhc->ports_max; port_idx++) { - wusb_dev = wusbhc->port[port_idx].wusb_dev; - if (!wusb_dev || !wusb_dev->usb_dev - || !wusb_dev->usb_dev->authenticated) - continue; - - wusb_dev_get(wusb_dev); - list_add_tail(&wusb_dev->rekey_node, &rekey_list); - } - mutex_unlock(&wusbhc->mutex); - - /* Submit the rekey requests without holding wusbhc->mutex. */ - list_for_each_entry_safe(wusb_dev, wusb_dev_next, &rekey_list, - rekey_node) { - list_del_init(&wusb_dev->rekey_node); - dev_dbg(&wusb_dev->usb_dev->dev, - "%s: rekey device at port %d\n", - __func__, wusb_dev->port_idx); - - if (wusb_dev_set_gtk(wusbhc, wusb_dev) < 0) { - dev_err(&wusb_dev->usb_dev->dev, - "%s: rekey device at port %d failed\n", - __func__, wusb_dev->port_idx); - } - wusb_dev_put(wusb_dev); - } - - /* Switch the host controller to use the new GTK. */ - mutex_lock(&wusbhc->mutex); - wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, - &wusbhc->gtk.descr.bKeyData, key_size); - mutex_unlock(&wusbhc->mutex); -} - -/** - * wusbhc_gtk_rekey - generate and distribute a new GTK - * @wusbhc: the WUSB host controller - * - * Generate a new GTK and distribute it to all connected and - * authenticated devices. When all devices have the new GTK, the host - * starts using it. - * - * This must be called after every device disconnect (see [WUSB] - * section 6.2.11.2). - */ -void wusbhc_gtk_rekey(struct wusbhc *wusbhc) -{ - /* - * We need to submit a URB to the downstream WUSB devices in order to - * change the group key. This can't be done while holding the - * wusbhc->mutex since that is also taken in the urb_enqueue routine - * and will cause a deadlock. Instead, queue a work item to do - * it when the lock is not held - */ - queue_work(wusbhc->wq_security, &wusbhc->gtk_rekey_work); -} diff --git a/drivers/staging/wusbcore/wa-hc.c b/drivers/staging/wusbcore/wa-hc.c deleted file mode 100644 index 6827075fb8a1..000000000000 --- a/drivers/staging/wusbcore/wa-hc.c +++ /dev/null @@ -1,88 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wire Adapter Host Controller Driver - * Common items to HWA and DWA based HCDs - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - */ -#include <linux/slab.h> -#include <linux/module.h> -#include "wusbhc.h" -#include "wa-hc.h" - -/** - * Assumes - * - * wa->usb_dev and wa->usb_iface initialized and refcounted, - * wa->wa_descr initialized. - */ -int wa_create(struct wahc *wa, struct usb_interface *iface, - kernel_ulong_t quirks) -{ - int result; - struct device *dev = &iface->dev; - - if (iface->cur_altsetting->desc.bNumEndpoints < 3) - return -ENODEV; - - result = wa_rpipes_create(wa); - if (result < 0) - goto error_rpipes_create; - wa->quirks = quirks; - /* Fill up Data Transfer EP pointers */ - wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc; - wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; - wa->dti_buf_size = usb_endpoint_maxp(wa->dti_epd); - wa->dti_buf = kmalloc(wa->dti_buf_size, GFP_KERNEL); - if (wa->dti_buf == NULL) { - result = -ENOMEM; - goto error_dti_buf_alloc; - } - result = wa_nep_create(wa, iface); - if (result < 0) { - dev_err(dev, "WA-CDS: can't initialize notif endpoint: %d\n", - result); - goto error_nep_create; - } - return 0; - -error_nep_create: - kfree(wa->dti_buf); -error_dti_buf_alloc: - wa_rpipes_destroy(wa); -error_rpipes_create: - return result; -} -EXPORT_SYMBOL_GPL(wa_create); - - -void __wa_destroy(struct wahc *wa) -{ - if (wa->dti_urb) { - usb_kill_urb(wa->dti_urb); - usb_put_urb(wa->dti_urb); - } - kfree(wa->dti_buf); - wa_nep_destroy(wa); - wa_rpipes_destroy(wa); -} -EXPORT_SYMBOL_GPL(__wa_destroy); - -/** - * wa_reset_all - reset the WA device - * @wa: the WA to be reset - * - * For HWAs the radio controller and all other PALs are also reset. - */ -void wa_reset_all(struct wahc *wa) -{ - /* FIXME: assuming HWA. */ - wusbhc_reset_all(wa->wusb); -} - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Wireless USB Wire Adapter core"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/wusbcore/wa-hc.h b/drivers/staging/wusbcore/wa-hc.h deleted file mode 100644 index 5a38465724c2..000000000000 --- a/drivers/staging/wusbcore/wa-hc.h +++ /dev/null @@ -1,467 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * HWA Host Controller Driver - * Wire Adapter Control/Data Streaming Iface (WUSB1.0[8]) - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This driver implements a USB Host Controller (struct usb_hcd) for a - * Wireless USB Host Controller based on the Wireless USB 1.0 - * Host-Wire-Adapter specification (in layman terms, a USB-dongle that - * implements a Wireless USB host). - * - * Check out the Design-overview.txt file in the source documentation - * for other details on the implementation. - * - * Main blocks: - * - * driver glue with the driver API, workqueue daemon - * - * lc RC instance life cycle management (create, destroy...) - * - * hcd glue with the USB API Host Controller Interface API. - * - * nep Notification EndPoint management: collect notifications - * and queue them with the workqueue daemon. - * - * Handle notifications as coming from the NEP. Sends them - * off others to their respective modules (eg: connect, - * disconnect and reset go to devconnect). - * - * rpipe Remote Pipe management; rpipe is what we use to write - * to an endpoint on a WUSB device that is connected to a - * HWA RC. - * - * xfer Transfer management -- this is all the code that gets a - * buffer and pushes it to a device (or viceversa). * - * - * Some day a lot of this code will be shared between this driver and - * the drivers for DWA (xfer, rpipe). - * - * All starts at driver.c:hwahc_probe(), when one of this guys is - * connected. hwahc_disconnect() stops it. - * - * During operation, the main driver is devices connecting or - * disconnecting. They cause the HWA RC to send notifications into - * nep.c:hwahc_nep_cb() that will dispatch them to - * notif.c:wa_notif_dispatch(). From there they will fan to cause - * device connects, disconnects, etc. - * - * Note much of the activity is difficult to follow. For example a - * device connect goes to devconnect, which will cause the "fake" root - * hub port to show a connect and stop there. Then hub_wq will notice - * and call into the rh.c:hwahc_rc_port_reset() code to authenticate - * the device (and this might require user intervention) and enable - * the port. - * - * We also have a timer workqueue going from devconnect.c that - * schedules in hwahc_devconnect_create(). - * - * The rest of the traffic is in the usual entry points of a USB HCD, - * which are hooked up in driver.c:hwahc_rc_driver, and defined in - * hcd.c. - */ - -#ifndef __HWAHC_INTERNAL_H__ -#define __HWAHC_INTERNAL_H__ - -#include <linux/completion.h> -#include <linux/usb.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include "../uwb/uwb.h" -#include "include/wusb.h" -#include "include/wusb-wa.h" - -struct wusbhc; -struct wahc; -extern void wa_urb_enqueue_run(struct work_struct *ws); -extern void wa_process_errored_transfers_run(struct work_struct *ws); - -/** - * RPipe instance - * - * @descr's fields are kept in LE, as we need to send it back and - * forth. - * - * @wa is referenced when set - * - * @segs_available is the number of requests segments that still can - * be submitted to the controller without overloading - * it. It is initialized to descr->wRequests when - * aiming. - * - * A rpipe supports a max of descr->wRequests at the same time; before - * submitting seg_lock has to be taken. If segs_avail > 0, then we can - * submit; if not, we have to queue them. - */ -struct wa_rpipe { - struct kref refcnt; - struct usb_rpipe_descriptor descr; - struct usb_host_endpoint *ep; - struct wahc *wa; - spinlock_t seg_lock; - struct list_head seg_list; - struct list_head list_node; - atomic_t segs_available; - u8 buffer[1]; /* For reads/writes on USB */ -}; - - -enum wa_dti_state { - WA_DTI_TRANSFER_RESULT_PENDING, - WA_DTI_ISOC_PACKET_STATUS_PENDING, - WA_DTI_BUF_IN_DATA_PENDING -}; - -enum wa_quirks { - /* - * The Alereon HWA expects the data frames in isochronous transfer - * requests to be concatenated and not sent as separate packets. - */ - WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC = 0x01, - /* - * The Alereon HWA can be instructed to not send transfer notifications - * as an optimization. - */ - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS = 0x02, -}; - -enum wa_vendor_specific_requests { - WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS = 0x4C, - WA_REQ_ALEREON_FEATURE_SET = 0x01, - WA_REQ_ALEREON_FEATURE_CLEAR = 0x00, -}; - -#define WA_MAX_BUF_IN_URBS 4 -/** - * Instance of a HWA Host Controller - * - * Except where a more specific lock/mutex applies or atomic, all - * fields protected by @mutex. - * - * @wa_descr Can be accessed without locking because it is in - * the same area where the device descriptors were - * read, so it is guaranteed to exist unmodified while - * the device exists. - * - * Endianess has been converted to CPU's. - * - * @nep_* can be accessed without locking as its processing is - * serialized; we submit a NEP URB and it comes to - * hwahc_nep_cb(), which won't issue another URB until it is - * done processing it. - * - * @xfer_list: - * - * List of active transfers to verify existence from a xfer id - * gotten from the xfer result message. Can't use urb->list because - * it goes by endpoint, and we don't know the endpoint at the time - * when we get the xfer result message. We can't really rely on the - * pointer (will have to change for 64 bits) as the xfer id is 32 bits. - * - * @xfer_delayed_list: List of transfers that need to be started - * (with a workqueue, because they were - * submitted from an atomic context). - * - * FIXME: this needs to be layered up: a wusbhc layer (for sharing - * commonalities with WHCI), a wa layer (for sharing - * commonalities with DWA-RC). - */ -struct wahc { - struct usb_device *usb_dev; - struct usb_interface *usb_iface; - - /* HC to deliver notifications */ - union { - struct wusbhc *wusb; - struct dwahc *dwa; - }; - - const struct usb_endpoint_descriptor *dto_epd, *dti_epd; - const struct usb_wa_descriptor *wa_descr; - - struct urb *nep_urb; /* Notification EndPoint [lockless] */ - struct edc nep_edc; - void *nep_buffer; - size_t nep_buffer_size; - - atomic_t notifs_queued; - - u16 rpipes; - unsigned long *rpipe_bm; /* rpipe usage bitmap */ - struct list_head rpipe_delayed_list; /* delayed RPIPES. */ - spinlock_t rpipe_lock; /* protect rpipe_bm and delayed list */ - struct mutex rpipe_mutex; /* assigning resources to endpoints */ - - /* - * dti_state is used to track the state of the dti_urb. When dti_state - * is WA_DTI_ISOC_PACKET_STATUS_PENDING, dti_isoc_xfer_in_progress and - * dti_isoc_xfer_seg identify which xfer the incoming isoc packet - * status refers to. - */ - enum wa_dti_state dti_state; - u32 dti_isoc_xfer_in_progress; - u8 dti_isoc_xfer_seg; - struct urb *dti_urb; /* URB for reading xfer results */ - /* URBs for reading data in */ - struct urb buf_in_urbs[WA_MAX_BUF_IN_URBS]; - int active_buf_in_urbs; /* number of buf_in_urbs active. */ - struct edc dti_edc; /* DTI error density counter */ - void *dti_buf; - size_t dti_buf_size; - - unsigned long dto_in_use; /* protect dto endoint serialization */ - - s32 status; /* For reading status */ - - struct list_head xfer_list; - struct list_head xfer_delayed_list; - struct list_head xfer_errored_list; - /* - * lock for the above xfer lists. Can be taken while a xfer->lock is - * held but not in the reverse order. - */ - spinlock_t xfer_list_lock; - struct work_struct xfer_enqueue_work; - struct work_struct xfer_error_work; - atomic_t xfer_id_count; - - kernel_ulong_t quirks; -}; - - -extern int wa_create(struct wahc *wa, struct usb_interface *iface, - kernel_ulong_t); -extern void __wa_destroy(struct wahc *wa); -extern int wa_dti_start(struct wahc *wa); -void wa_reset_all(struct wahc *wa); - - -/* Miscellaneous constants */ -enum { - /** Max number of EPROTO errors we tolerate on the NEP in a - * period of time */ - HWAHC_EPROTO_MAX = 16, - /** Period of time for EPROTO errors (in jiffies) */ - HWAHC_EPROTO_PERIOD = 4 * HZ, -}; - - -/* Notification endpoint handling */ -extern int wa_nep_create(struct wahc *, struct usb_interface *); -extern void wa_nep_destroy(struct wahc *); - -static inline int wa_nep_arm(struct wahc *wa, gfp_t gfp_mask) -{ - struct urb *urb = wa->nep_urb; - urb->transfer_buffer = wa->nep_buffer; - urb->transfer_buffer_length = wa->nep_buffer_size; - return usb_submit_urb(urb, gfp_mask); -} - -static inline void wa_nep_disarm(struct wahc *wa) -{ - usb_kill_urb(wa->nep_urb); -} - - -/* RPipes */ -static inline void wa_rpipe_init(struct wahc *wa) -{ - INIT_LIST_HEAD(&wa->rpipe_delayed_list); - spin_lock_init(&wa->rpipe_lock); - mutex_init(&wa->rpipe_mutex); -} - -static inline void wa_init(struct wahc *wa) -{ - int index; - - edc_init(&wa->nep_edc); - atomic_set(&wa->notifs_queued, 0); - wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; - wa_rpipe_init(wa); - edc_init(&wa->dti_edc); - INIT_LIST_HEAD(&wa->xfer_list); - INIT_LIST_HEAD(&wa->xfer_delayed_list); - INIT_LIST_HEAD(&wa->xfer_errored_list); - spin_lock_init(&wa->xfer_list_lock); - INIT_WORK(&wa->xfer_enqueue_work, wa_urb_enqueue_run); - INIT_WORK(&wa->xfer_error_work, wa_process_errored_transfers_run); - wa->dto_in_use = 0; - atomic_set(&wa->xfer_id_count, 1); - /* init the buf in URBs */ - for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) - usb_init_urb(&(wa->buf_in_urbs[index])); - wa->active_buf_in_urbs = 0; -} - -/** - * Destroy a pipe (when refcount drops to zero) - * - * Assumes it has been moved to the "QUIESCING" state. - */ -struct wa_xfer; -extern void rpipe_destroy(struct kref *_rpipe); -static inline -void __rpipe_get(struct wa_rpipe *rpipe) -{ - kref_get(&rpipe->refcnt); -} -extern int rpipe_get_by_ep(struct wahc *, struct usb_host_endpoint *, - struct urb *, gfp_t); -static inline void rpipe_put(struct wa_rpipe *rpipe) -{ - kref_put(&rpipe->refcnt, rpipe_destroy); - -} -extern void rpipe_ep_disable(struct wahc *, struct usb_host_endpoint *); -extern void rpipe_clear_feature_stalled(struct wahc *, - struct usb_host_endpoint *); -extern int wa_rpipes_create(struct wahc *); -extern void wa_rpipes_destroy(struct wahc *); -static inline void rpipe_avail_dec(struct wa_rpipe *rpipe) -{ - atomic_dec(&rpipe->segs_available); -} - -/** - * Returns true if the rpipe is ready to submit more segments. - */ -static inline int rpipe_avail_inc(struct wa_rpipe *rpipe) -{ - return atomic_inc_return(&rpipe->segs_available) > 0 - && !list_empty(&rpipe->seg_list); -} - - -/* Transferring data */ -extern int wa_urb_enqueue(struct wahc *, struct usb_host_endpoint *, - struct urb *, gfp_t); -extern int wa_urb_dequeue(struct wahc *, struct urb *, int); -extern void wa_handle_notif_xfer(struct wahc *, struct wa_notif_hdr *); - - -/* Misc - * - * FIXME: Refcounting for the actual @hwahc object is not correct; I - * mean, this should be refcounting on the HCD underneath, but - * it is not. In any case, the semantics for HCD refcounting - * are *weird*...on refcount reaching zero it just frees - * it...no RC specific function is called...unless I miss - * something. - * - * FIXME: has to go away in favour of a 'struct' hcd based solution - */ -static inline struct wahc *wa_get(struct wahc *wa) -{ - usb_get_intf(wa->usb_iface); - return wa; -} - -static inline void wa_put(struct wahc *wa) -{ - usb_put_intf(wa->usb_iface); -} - - -static inline int __wa_feature(struct wahc *wa, unsigned op, u16 feature) -{ - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - op ? USB_REQ_SET_FEATURE : USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - feature, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - - -static inline int __wa_set_feature(struct wahc *wa, u16 feature) -{ - return __wa_feature(wa, 1, feature); -} - - -static inline int __wa_clear_feature(struct wahc *wa, u16 feature) -{ - return __wa_feature(wa, 0, feature); -} - - -/** - * Return the status of a Wire Adapter - * - * @wa: Wire Adapter instance - * @returns < 0 errno code on error, or status bitmap as described - * in WUSB1.0[8.3.1.6]. - * - * NOTE: need malloc, some arches don't take USB from the stack - */ -static inline -s32 __wa_get_status(struct wahc *wa) -{ - s32 result; - result = usb_control_msg( - wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), - USB_REQ_GET_STATUS, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - &wa->status, sizeof(wa->status), USB_CTRL_GET_TIMEOUT); - if (result >= 0) - result = wa->status; - return result; -} - - -/** - * Waits until the Wire Adapter's status matches @mask/@value - * - * @wa: Wire Adapter instance. - * @returns < 0 errno code on error, otherwise status. - * - * Loop until the WAs status matches the mask and value (status & mask - * == value). Timeout if it doesn't happen. - * - * FIXME: is there an official specification on how long status - * changes can take? - */ -static inline s32 __wa_wait_status(struct wahc *wa, u32 mask, u32 value) -{ - s32 result; - unsigned loops = 10; - do { - msleep(50); - result = __wa_get_status(wa); - if ((result & mask) == value) - break; - if (loops-- == 0) { - result = -ETIMEDOUT; - break; - } - } while (result >= 0); - return result; -} - - -/** Command @hwahc to stop, @returns 0 if ok, < 0 errno code on error */ -static inline int __wa_stop(struct wahc *wa) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - - result = __wa_clear_feature(wa, WA_ENABLE); - if (result < 0 && result != -ENODEV) { - dev_err(dev, "error commanding HC to stop: %d\n", result); - goto out; - } - result = __wa_wait_status(wa, WA_ENABLE, 0); - if (result < 0 && result != -ENODEV) - dev_err(dev, "error waiting for HC to stop: %d\n", result); -out: - return 0; -} - - -#endif /* #ifndef __HWAHC_INTERNAL_H__ */ diff --git a/drivers/staging/wusbcore/wa-nep.c b/drivers/staging/wusbcore/wa-nep.c deleted file mode 100644 index 5f0656db5482..000000000000 --- a/drivers/staging/wusbcore/wa-nep.c +++ /dev/null @@ -1,289 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) - * Notification EndPoint support - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This part takes care of getting the notification from the hw - * only and dispatching through wusbwad into - * wa_notif_dispatch. Handling is done there. - * - * WA notifications are limited in size; most of them are three or - * four bytes long, and the longest is the HWA Device Notification, - * which would not exceed 38 bytes (DNs are limited in payload to 32 - * bytes plus 3 bytes header (WUSB1.0[7.6p2]), plus 3 bytes HWA - * header (WUSB1.0[8.5.4.2]). - * - * It is not clear if more than one Device Notification can be packed - * in a HWA Notification, I assume no because of the wording in - * WUSB1.0[8.5.4.2]. In any case, the bigger any notification could - * get is 256 bytes (as the bLength field is a byte). - * - * So what we do is we have this buffer and read into it; when a - * notification arrives we schedule work to a specific, single thread - * workqueue (so notifications are serialized) and copy the - * notification data. After scheduling the work, we rearm the read from - * the notification endpoint. - * - * Entry points here are: - * - * wa_nep_[create|destroy]() To initialize/release this subsystem - * - * wa_nep_cb() Callback for the notification - * endpoint; when data is ready, this - * does the dispatching. - */ -#include <linux/workqueue.h> -#include <linux/ctype.h> -#include <linux/slab.h> - -#include "wa-hc.h" -#include "wusbhc.h" - -/* Structure for queueing notifications to the workqueue */ -struct wa_notif_work { - struct work_struct work; - struct wahc *wa; - size_t size; - u8 data[]; -}; - -/* - * Process incoming notifications from the WA's Notification EndPoint - * [the wuswad daemon, basically] - * - * @_nw: Pointer to a descriptor which has the pointer to the - * @wa, the size of the buffer and the work queue - * structure (so we can free all when done). - * @returns 0 if ok, < 0 errno code on error. - * - * All notifications follow the same format; they need to start with a - * 'struct wa_notif_hdr' header, so it is easy to parse through - * them. We just break the buffer in individual notifications (the - * standard doesn't say if it can be done or is forbidden, so we are - * cautious) and dispatch each. - * - * So the handling layers are is: - * - * WA specific notification (from NEP) - * Device Notification Received -> wa_handle_notif_dn() - * WUSB Device notification generic handling - * BPST Adjustment -> wa_handle_notif_bpst_adj() - * ... -> ... - * - * @wa has to be referenced - */ -static void wa_notif_dispatch(struct work_struct *ws) -{ - void *itr; - u8 missing = 0; - struct wa_notif_work *nw = container_of(ws, struct wa_notif_work, - work); - struct wahc *wa = nw->wa; - struct wa_notif_hdr *notif_hdr; - size_t size; - - struct device *dev = &wa->usb_iface->dev; - -#if 0 - /* FIXME: need to check for this??? */ - if (usb_hcd->state == HC_STATE_QUIESCING) /* Going down? */ - goto out; /* screw it */ -#endif - atomic_dec(&wa->notifs_queued); /* Throttling ctl */ - size = nw->size; - itr = nw->data; - - while (size) { - if (size < sizeof(*notif_hdr)) { - missing = sizeof(*notif_hdr) - size; - goto exhausted_buffer; - } - notif_hdr = itr; - if (size < notif_hdr->bLength) - goto exhausted_buffer; - itr += notif_hdr->bLength; - size -= notif_hdr->bLength; - /* Dispatch the notification [don't use itr or size!] */ - switch (notif_hdr->bNotifyType) { - case HWA_NOTIF_DN: { - struct hwa_notif_dn *hwa_dn; - hwa_dn = container_of(notif_hdr, struct hwa_notif_dn, - hdr); - wusbhc_handle_dn(wa->wusb, hwa_dn->bSourceDeviceAddr, - hwa_dn->dndata, - notif_hdr->bLength - sizeof(*hwa_dn)); - break; - } - case WA_NOTIF_TRANSFER: - wa_handle_notif_xfer(wa, notif_hdr); - break; - case HWA_NOTIF_BPST_ADJ: - break; /* no action needed for BPST ADJ. */ - case DWA_NOTIF_RWAKE: - case DWA_NOTIF_PORTSTATUS: - /* FIXME: unimplemented WA NOTIFs */ - /* fallthru */ - default: - dev_err(dev, "HWA: unknown notification 0x%x, " - "%zu bytes; discarding\n", - notif_hdr->bNotifyType, - (size_t)notif_hdr->bLength); - break; - } - } -out: - wa_put(wa); - kfree(nw); - return; - - /* THIS SHOULD NOT HAPPEN - * - * Buffer exahusted with partial data remaining; just warn and - * discard the data, as this should not happen. - */ -exhausted_buffer: - dev_warn(dev, "HWA: device sent short notification, " - "%d bytes missing; discarding %d bytes.\n", - missing, (int)size); - goto out; -} - -/* - * Deliver incoming WA notifications to the wusbwa workqueue - * - * @wa: Pointer the Wire Adapter Controller Data Streaming - * instance (part of an 'struct usb_hcd'). - * @size: Size of the received buffer - * @returns 0 if ok, < 0 errno code on error. - * - * The input buffer is @wa->nep_buffer, with @size bytes - * (guaranteed to fit in the allocated space, - * @wa->nep_buffer_size). - */ -static int wa_nep_queue(struct wahc *wa, size_t size) -{ - int result = 0; - struct device *dev = &wa->usb_iface->dev; - struct wa_notif_work *nw; - - /* dev_fnstart(dev, "(wa %p, size %zu)\n", wa, size); */ - BUG_ON(size > wa->nep_buffer_size); - if (size == 0) - goto out; - if (atomic_read(&wa->notifs_queued) > 200) { - if (printk_ratelimit()) - dev_err(dev, "Too many notifications queued, " - "throttling back\n"); - goto out; - } - nw = kzalloc(sizeof(*nw) + size, GFP_ATOMIC); - if (nw == NULL) { - if (printk_ratelimit()) - dev_err(dev, "No memory to queue notification\n"); - result = -ENOMEM; - goto out; - } - INIT_WORK(&nw->work, wa_notif_dispatch); - nw->wa = wa_get(wa); - nw->size = size; - memcpy(nw->data, wa->nep_buffer, size); - atomic_inc(&wa->notifs_queued); /* Throttling ctl */ - queue_work(wusbd, &nw->work); -out: - /* dev_fnend(dev, "(wa %p, size %zu) = result\n", wa, size, result); */ - return result; -} - -/* - * Callback for the notification event endpoint - * - * Check's that everything is fine and then passes the data to be - * queued to the workqueue. - */ -static void wa_nep_cb(struct urb *urb) -{ - int result; - struct wahc *wa = urb->context; - struct device *dev = &wa->usb_iface->dev; - - switch (result = urb->status) { - case 0: - result = wa_nep_queue(wa, urb->actual_length); - if (result < 0) - dev_err(dev, "NEP: unable to process notification(s): " - "%d\n", result); - break; - case -ECONNRESET: /* Not an error, but a controlled situation; */ - case -ENOENT: /* (we killed the URB)...so, no broadcast */ - case -ESHUTDOWN: - dev_dbg(dev, "NEP: going down %d\n", urb->status); - goto out; - default: /* On general errors, we retry unless it gets ugly */ - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "NEP: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - goto out; - } - dev_err(dev, "NEP: URB error %d\n", urb->status); - } - result = wa_nep_arm(wa, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "NEP: cannot submit URB: %d\n", result); - wa_reset_all(wa); - } -out: - return; -} - -/* - * Initialize @wa's notification and event's endpoint stuff - * - * This includes the allocating the read buffer, the context ID - * allocation bitmap, the URB and submitting the URB. - */ -int wa_nep_create(struct wahc *wa, struct usb_interface *iface) -{ - int result; - struct usb_endpoint_descriptor *epd; - struct usb_device *usb_dev = interface_to_usbdev(iface); - struct device *dev = &iface->dev; - - edc_init(&wa->nep_edc); - epd = &iface->cur_altsetting->endpoint[0].desc; - wa->nep_buffer_size = 1024; - wa->nep_buffer = kmalloc(wa->nep_buffer_size, GFP_KERNEL); - if (!wa->nep_buffer) - goto error_nep_buffer; - wa->nep_urb = usb_alloc_urb(0, GFP_KERNEL); - if (wa->nep_urb == NULL) - goto error_urb_alloc; - usb_fill_int_urb(wa->nep_urb, usb_dev, - usb_rcvintpipe(usb_dev, epd->bEndpointAddress), - wa->nep_buffer, wa->nep_buffer_size, - wa_nep_cb, wa, epd->bInterval); - result = wa_nep_arm(wa, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "Cannot submit notification URB: %d\n", result); - goto error_nep_arm; - } - return 0; - -error_nep_arm: - usb_free_urb(wa->nep_urb); -error_urb_alloc: - kfree(wa->nep_buffer); -error_nep_buffer: - return -ENOMEM; -} - -void wa_nep_destroy(struct wahc *wa) -{ - wa_nep_disarm(wa); - usb_free_urb(wa->nep_urb); - kfree(wa->nep_buffer); -} diff --git a/drivers/staging/wusbcore/wa-rpipe.c b/drivers/staging/wusbcore/wa-rpipe.c deleted file mode 100644 index a5734cbcd5ad..000000000000 --- a/drivers/staging/wusbcore/wa-rpipe.c +++ /dev/null @@ -1,539 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter - * rpipe management - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - * - * RPIPE - * - * Targeted at different downstream endpoints - * - * Descriptor: use to config the remote pipe. - * - * The number of blocks could be dynamic (wBlocks in descriptor is - * 0)--need to schedule them then. - * - * Each bit in wa->rpipe_bm represents if an rpipe is being used or - * not. Rpipes are represented with a 'struct wa_rpipe' that is - * attached to the hcpriv member of a 'struct usb_host_endpoint'. - * - * When you need to xfer data to an endpoint, you get an rpipe for it - * with wa_ep_rpipe_get(), which gives you a reference to the rpipe - * and keeps a single one (the first one) with the endpoint. When you - * are done transferring, you drop that reference. At the end the - * rpipe is always allocated and bound to the endpoint. There it might - * be recycled when not used. - * - * Addresses: - * - * We use a 1:1 mapping mechanism between port address (0 based - * index, actually) and the address. The USB stack knows about this. - * - * USB Stack port number 4 (1 based) - * WUSB code port index 3 (0 based) - * USB Address 5 (2 based -- 0 is for default, 1 for root hub) - * - * Now, because we don't use the concept as default address exactly - * like the (wired) USB code does, we need to kind of skip it. So we - * never take addresses from the urb->pipe, but from the - * urb->dev->devnum, to make sure that we always have the right - * destination address. - */ -#include <linux/atomic.h> -#include <linux/bitmap.h> -#include <linux/slab.h> -#include <linux/export.h> - -#include "wusbhc.h" -#include "wa-hc.h" - -static int __rpipe_get_descr(struct wahc *wa, - struct usb_rpipe_descriptor *descr, u16 index) -{ - ssize_t result; - struct device *dev = &wa->usb_iface->dev; - - /* Get the RPIPE descriptor -- we cannot use the usb_get_descriptor() - * function because the arguments are different. - */ - result = usb_control_msg( - wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), - USB_REQ_GET_DESCRIPTOR, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_RPIPE, - USB_DT_RPIPE<<8, index, descr, sizeof(*descr), - USB_CTRL_GET_TIMEOUT); - if (result < 0) { - dev_err(dev, "rpipe %u: get descriptor failed: %d\n", - index, (int)result); - goto error; - } - if (result < sizeof(*descr)) { - dev_err(dev, "rpipe %u: got short descriptor " - "(%zd vs %zd bytes needed)\n", - index, result, sizeof(*descr)); - result = -EINVAL; - goto error; - } - result = 0; - -error: - return result; -} - -/* - * - * The descriptor is assumed to be properly initialized (ie: you got - * it through __rpipe_get_descr()). - */ -static int __rpipe_set_descr(struct wahc *wa, - struct usb_rpipe_descriptor *descr, u16 index) -{ - ssize_t result; - struct device *dev = &wa->usb_iface->dev; - - /* we cannot use the usb_get_descriptor() function because the - * arguments are different. - */ - result = usb_control_msg( - wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_DESCRIPTOR, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, - USB_DT_RPIPE<<8, index, descr, sizeof(*descr), - USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "rpipe %u: set descriptor failed: %d\n", - index, (int)result); - goto error; - } - if (result < sizeof(*descr)) { - dev_err(dev, "rpipe %u: sent short descriptor " - "(%zd vs %zd bytes required)\n", - index, result, sizeof(*descr)); - result = -EINVAL; - goto error; - } - result = 0; - -error: - return result; - -} - -static void rpipe_init(struct wa_rpipe *rpipe) -{ - kref_init(&rpipe->refcnt); - spin_lock_init(&rpipe->seg_lock); - INIT_LIST_HEAD(&rpipe->seg_list); - INIT_LIST_HEAD(&rpipe->list_node); -} - -static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx) -{ - unsigned long flags; - - spin_lock_irqsave(&wa->rpipe_lock, flags); - rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx); - if (rpipe_idx < wa->rpipes) - set_bit(rpipe_idx, wa->rpipe_bm); - spin_unlock_irqrestore(&wa->rpipe_lock, flags); - - return rpipe_idx; -} - -static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx) -{ - unsigned long flags; - - spin_lock_irqsave(&wa->rpipe_lock, flags); - clear_bit(rpipe_idx, wa->rpipe_bm); - spin_unlock_irqrestore(&wa->rpipe_lock, flags); -} - -void rpipe_destroy(struct kref *_rpipe) -{ - struct wa_rpipe *rpipe = container_of(_rpipe, struct wa_rpipe, refcnt); - u8 index = le16_to_cpu(rpipe->descr.wRPipeIndex); - - if (rpipe->ep) - rpipe->ep->hcpriv = NULL; - rpipe_put_idx(rpipe->wa, index); - wa_put(rpipe->wa); - kfree(rpipe); -} -EXPORT_SYMBOL_GPL(rpipe_destroy); - -/* - * Locate an idle rpipe, create an structure for it and return it - * - * @wa is referenced and unlocked - * @crs enum rpipe_attr, required endpoint characteristics - * - * The rpipe can be used only sequentially (not in parallel). - * - * The rpipe is moved into the "ready" state. - */ -static int rpipe_get_idle(struct wa_rpipe **prpipe, struct wahc *wa, u8 crs, - gfp_t gfp) -{ - int result; - unsigned rpipe_idx; - struct wa_rpipe *rpipe; - struct device *dev = &wa->usb_iface->dev; - - rpipe = kzalloc(sizeof(*rpipe), gfp); - if (rpipe == NULL) - return -ENOMEM; - rpipe_init(rpipe); - - /* Look for an idle pipe */ - for (rpipe_idx = 0; rpipe_idx < wa->rpipes; rpipe_idx++) { - rpipe_idx = rpipe_get_idx(wa, rpipe_idx); - if (rpipe_idx >= wa->rpipes) /* no more pipes :( */ - break; - result = __rpipe_get_descr(wa, &rpipe->descr, rpipe_idx); - if (result < 0) - dev_err(dev, "Can't get descriptor for rpipe %u: %d\n", - rpipe_idx, result); - else if ((rpipe->descr.bmCharacteristics & crs) != 0) - goto found; - rpipe_put_idx(wa, rpipe_idx); - } - *prpipe = NULL; - kfree(rpipe); - return -ENXIO; - -found: - set_bit(rpipe_idx, wa->rpipe_bm); - rpipe->wa = wa_get(wa); - *prpipe = rpipe; - return 0; -} - -static int __rpipe_reset(struct wahc *wa, unsigned index) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - - result = usb_control_msg( - wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_RPIPE_RESET, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, - 0, index, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "rpipe %u: reset failed: %d\n", - index, result); - return result; -} - -/* - * Fake companion descriptor for ep0 - * - * See WUSB1.0[7.4.4], most of this is zero for bulk/int/ctl - */ -static struct usb_wireless_ep_comp_descriptor epc0 = { - .bLength = sizeof(epc0), - .bDescriptorType = USB_DT_WIRELESS_ENDPOINT_COMP, - .bMaxBurst = 1, - .bMaxSequence = 2, -}; - -/* - * Look for EP companion descriptor - * - * Get there, look for Inara in the endpoint's extra descriptors - */ -static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find( - struct device *dev, struct usb_host_endpoint *ep) -{ - void *itr; - size_t itr_size; - struct usb_descriptor_header *hdr; - struct usb_wireless_ep_comp_descriptor *epcd; - - if (ep->desc.bEndpointAddress == 0) { - epcd = &epc0; - goto out; - } - itr = ep->extra; - itr_size = ep->extralen; - epcd = NULL; - while (itr_size > 0) { - if (itr_size < sizeof(*hdr)) { - dev_err(dev, "HW Bug? ep 0x%02x: extra descriptors " - "at offset %zu: only %zu bytes left\n", - ep->desc.bEndpointAddress, - itr - (void *) ep->extra, itr_size); - break; - } - hdr = itr; - if (hdr->bDescriptorType == USB_DT_WIRELESS_ENDPOINT_COMP) { - epcd = itr; - break; - } - if (hdr->bLength > itr_size) { - dev_err(dev, "HW Bug? ep 0x%02x: extra descriptor " - "at offset %zu (type 0x%02x) " - "length %d but only %zu bytes left\n", - ep->desc.bEndpointAddress, - itr - (void *) ep->extra, hdr->bDescriptorType, - hdr->bLength, itr_size); - break; - } - itr += hdr->bLength; - itr_size -= hdr->bLength; - } -out: - return epcd; -} - -/* - * Aim an rpipe to its device & endpoint destination - * - * Make sure we change the address to unauthenticated if the device - * is WUSB and it is not authenticated. - */ -static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa, - struct usb_host_endpoint *ep, struct urb *urb, gfp_t gfp) -{ - int result = -ENOMSG; /* better code for lack of companion? */ - struct device *dev = &wa->usb_iface->dev; - struct usb_device *usb_dev = urb->dev; - struct usb_wireless_ep_comp_descriptor *epcd; - u32 ack_window, epcd_max_sequence; - u8 unauth; - - epcd = rpipe_epc_find(dev, ep); - if (epcd == NULL) { - dev_err(dev, "ep 0x%02x: can't find companion descriptor\n", - ep->desc.bEndpointAddress); - goto error; - } - unauth = usb_dev->wusb && !usb_dev->authenticated ? 0x80 : 0; - __rpipe_reset(wa, le16_to_cpu(rpipe->descr.wRPipeIndex)); - atomic_set(&rpipe->segs_available, - le16_to_cpu(rpipe->descr.wRequests)); - /* FIXME: block allocation system; request with queuing and timeout */ - /* FIXME: compute so seg_size > ep->maxpktsize */ - rpipe->descr.wBlocks = cpu_to_le16(16); /* given */ - /* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */ - if (usb_endpoint_xfer_isoc(&ep->desc)) - rpipe->descr.wMaxPacketSize = epcd->wOverTheAirPacketSize; - else - rpipe->descr.wMaxPacketSize = ep->desc.wMaxPacketSize; - - rpipe->descr.hwa_bMaxBurst = max(min_t(unsigned int, - epcd->bMaxBurst, 16U), 1U); - rpipe->descr.hwa_bDeviceInfoIndex = - wusb_port_no_to_idx(urb->dev->portnum); - /* FIXME: use maximum speed as supported or recommended by device */ - rpipe->descr.bSpeed = usb_pipeendpoint(urb->pipe) == 0 ? - UWB_PHY_RATE_53 : UWB_PHY_RATE_200; - - dev_dbg(dev, "addr %u (0x%02x) rpipe #%u ep# %u speed %d\n", - urb->dev->devnum, urb->dev->devnum | unauth, - le16_to_cpu(rpipe->descr.wRPipeIndex), - usb_pipeendpoint(urb->pipe), rpipe->descr.bSpeed); - - rpipe->descr.hwa_reserved = 0; - - rpipe->descr.bEndpointAddress = ep->desc.bEndpointAddress; - /* FIXME: bDataSequence */ - rpipe->descr.bDataSequence = 0; - - /* start with base window of hwa_bMaxBurst bits starting at 0. */ - ack_window = 0xFFFFFFFF >> (32 - rpipe->descr.hwa_bMaxBurst); - rpipe->descr.dwCurrentWindow = cpu_to_le32(ack_window); - epcd_max_sequence = max(min_t(unsigned int, - epcd->bMaxSequence, 32U), 2U); - rpipe->descr.bMaxDataSequence = epcd_max_sequence - 1; - rpipe->descr.bInterval = ep->desc.bInterval; - if (usb_endpoint_xfer_isoc(&ep->desc)) - rpipe->descr.bOverTheAirInterval = epcd->bOverTheAirInterval; - else - rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */ - /* FIXME: xmit power & preamble blah blah */ - rpipe->descr.bmAttribute = (ep->desc.bmAttributes & - USB_ENDPOINT_XFERTYPE_MASK); - /* rpipe->descr.bmCharacteristics RO */ - rpipe->descr.bmRetryOptions = (wa->wusb->retry_count & 0xF); - /* FIXME: use for assessing link quality? */ - rpipe->descr.wNumTransactionErrors = 0; - result = __rpipe_set_descr(wa, &rpipe->descr, - le16_to_cpu(rpipe->descr.wRPipeIndex)); - if (result < 0) { - dev_err(dev, "Cannot aim rpipe: %d\n", result); - goto error; - } - result = 0; -error: - return result; -} - -/* - * Check an aimed rpipe to make sure it points to where we want - * - * We use bit 19 of the Linux USB pipe bitmap for unauth vs auth - * space; when it is like that, we or 0x80 to make an unauth address. - */ -static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa, - const struct usb_host_endpoint *ep, - const struct urb *urb, gfp_t gfp) -{ - int result = 0; - struct device *dev = &wa->usb_iface->dev; - u8 portnum = wusb_port_no_to_idx(urb->dev->portnum); - -#define AIM_CHECK(rdf, val, text) \ - do { \ - if (rpipe->descr.rdf != (val)) { \ - dev_err(dev, \ - "rpipe aim discrepancy: " #rdf " " text "\n", \ - rpipe->descr.rdf, (val)); \ - result = -EINVAL; \ - WARN_ON(1); \ - } \ - } while (0) - AIM_CHECK(hwa_bDeviceInfoIndex, portnum, "(%u vs %u)"); - AIM_CHECK(bSpeed, usb_pipeendpoint(urb->pipe) == 0 ? - UWB_PHY_RATE_53 : UWB_PHY_RATE_200, - "(%u vs %u)"); - AIM_CHECK(bEndpointAddress, ep->desc.bEndpointAddress, "(%u vs %u)"); - AIM_CHECK(bInterval, ep->desc.bInterval, "(%u vs %u)"); - AIM_CHECK(bmAttribute, ep->desc.bmAttributes & 0x03, "(%u vs %u)"); -#undef AIM_CHECK - return result; -} - -#ifndef CONFIG_BUG -#define CONFIG_BUG 0 -#endif - -/* - * Make sure there is an rpipe allocated for an endpoint - * - * If already allocated, we just refcount it; if not, we get an - * idle one, aim it to the right location and take it. - * - * Attaches to ep->hcpriv and rpipe->ep to ep. - */ -int rpipe_get_by_ep(struct wahc *wa, struct usb_host_endpoint *ep, - struct urb *urb, gfp_t gfp) -{ - int result = 0; - struct device *dev = &wa->usb_iface->dev; - struct wa_rpipe *rpipe; - u8 eptype; - - mutex_lock(&wa->rpipe_mutex); - rpipe = ep->hcpriv; - if (rpipe != NULL) { - if (CONFIG_BUG == 1) { - result = rpipe_check_aim(rpipe, wa, ep, urb, gfp); - if (result < 0) - goto error; - } - __rpipe_get(rpipe); - dev_dbg(dev, "ep 0x%02x: reusing rpipe %u\n", - ep->desc.bEndpointAddress, - le16_to_cpu(rpipe->descr.wRPipeIndex)); - } else { - /* hmm, assign idle rpipe, aim it */ - result = -ENOBUFS; - eptype = ep->desc.bmAttributes & 0x03; - result = rpipe_get_idle(&rpipe, wa, 1 << eptype, gfp); - if (result < 0) - goto error; - result = rpipe_aim(rpipe, wa, ep, urb, gfp); - if (result < 0) { - rpipe_put(rpipe); - goto error; - } - ep->hcpriv = rpipe; - rpipe->ep = ep; - __rpipe_get(rpipe); /* for caching into ep->hcpriv */ - dev_dbg(dev, "ep 0x%02x: using rpipe %u\n", - ep->desc.bEndpointAddress, - le16_to_cpu(rpipe->descr.wRPipeIndex)); - } -error: - mutex_unlock(&wa->rpipe_mutex); - return result; -} - -/* - * Allocate the bitmap for each rpipe. - */ -int wa_rpipes_create(struct wahc *wa) -{ - wa->rpipes = le16_to_cpu(wa->wa_descr->wNumRPipes); - wa->rpipe_bm = bitmap_zalloc(wa->rpipes, GFP_KERNEL); - if (wa->rpipe_bm == NULL) - return -ENOMEM; - return 0; -} - -void wa_rpipes_destroy(struct wahc *wa) -{ - struct device *dev = &wa->usb_iface->dev; - - if (!bitmap_empty(wa->rpipe_bm, wa->rpipes)) { - WARN_ON(1); - dev_err(dev, "BUG: pipes not released on exit: %*pb\n", - wa->rpipes, wa->rpipe_bm); - } - bitmap_free(wa->rpipe_bm); -} - -/* - * Release resources allocated for an endpoint - * - * If there is an associated rpipe to this endpoint, Abort any pending - * transfers and put it. If the rpipe ends up being destroyed, - * __rpipe_destroy() will cleanup ep->hcpriv. - * - * This is called before calling hcd->stop(), so you don't need to do - * anything else in there. - */ -void rpipe_ep_disable(struct wahc *wa, struct usb_host_endpoint *ep) -{ - struct wa_rpipe *rpipe; - - mutex_lock(&wa->rpipe_mutex); - rpipe = ep->hcpriv; - if (rpipe != NULL) { - u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex); - - usb_control_msg( - wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_RPIPE_ABORT, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, - 0, index, NULL, 0, USB_CTRL_SET_TIMEOUT); - rpipe_put(rpipe); - } - mutex_unlock(&wa->rpipe_mutex); -} -EXPORT_SYMBOL_GPL(rpipe_ep_disable); - -/* Clear the stalled status of an RPIPE. */ -void rpipe_clear_feature_stalled(struct wahc *wa, struct usb_host_endpoint *ep) -{ - struct wa_rpipe *rpipe; - - mutex_lock(&wa->rpipe_mutex); - rpipe = ep->hcpriv; - if (rpipe != NULL) { - u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex); - - usb_control_msg( - wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, - RPIPE_STALL, index, NULL, 0, USB_CTRL_SET_TIMEOUT); - } - mutex_unlock(&wa->rpipe_mutex); -} -EXPORT_SYMBOL_GPL(rpipe_clear_feature_stalled); diff --git a/drivers/staging/wusbcore/wa-xfer.c b/drivers/staging/wusbcore/wa-xfer.c deleted file mode 100644 index abf88cea37bb..000000000000 --- a/drivers/staging/wusbcore/wa-xfer.c +++ /dev/null @@ -1,2927 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter - * Data transfer and URB enqueing - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * How transfers work: get a buffer, break it up in segments (segment - * size is a multiple of the maxpacket size). For each segment issue a - * segment request (struct wa_xfer_*), then send the data buffer if - * out or nothing if in (all over the DTO endpoint). - * - * For each submitted segment request, a notification will come over - * the NEP endpoint and a transfer result (struct xfer_result) will - * arrive in the DTI URB. Read it, get the xfer ID, see if there is - * data coming (inbound transfer), schedule a read and handle it. - * - * Sounds simple, it is a pain to implement. - * - * - * ENTRY POINTS - * - * FIXME - * - * LIFE CYCLE / STATE DIAGRAM - * - * FIXME - * - * THIS CODE IS DISGUSTING - * - * Warned you are; it's my second try and still not happy with it. - * - * NOTES: - * - * - No iso - * - * - Supports DMA xfers, control, bulk and maybe interrupt - * - * - Does not recycle unused rpipes - * - * An rpipe is assigned to an endpoint the first time it is used, - * and then it's there, assigned, until the endpoint is disabled - * (destroyed [{h,d}wahc_op_ep_disable()]. The assignment of the - * rpipe to the endpoint is done under the wa->rpipe_sem semaphore - * (should be a mutex). - * - * Two methods it could be done: - * - * (a) set up a timer every time an rpipe's use count drops to 1 - * (which means unused) or when a transfer ends. Reset the - * timer when a xfer is queued. If the timer expires, release - * the rpipe [see rpipe_ep_disable()]. - * - * (b) when looking for free rpipes to attach [rpipe_get_by_ep()], - * when none are found go over the list, check their endpoint - * and their activity record (if no last-xfer-done-ts in the - * last x seconds) take it - * - * However, due to the fact that we have a set of limited - * resources (max-segments-at-the-same-time per xfer, - * xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end - * we are going to have to rebuild all this based on an scheduler, - * to where we have a list of transactions to do and based on the - * availability of the different required components (blocks, - * rpipes, segment slots, etc), we go scheduling them. Painful. - */ -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/hash.h> -#include <linux/ratelimit.h> -#include <linux/export.h> -#include <linux/scatterlist.h> - -#include "wa-hc.h" -#include "wusbhc.h" - -enum { - /* [WUSB] section 8.3.3 allocates 7 bits for the segment index. */ - WA_SEGS_MAX = 128, -}; - -enum wa_seg_status { - WA_SEG_NOTREADY, - WA_SEG_READY, - WA_SEG_DELAYED, - WA_SEG_SUBMITTED, - WA_SEG_PENDING, - WA_SEG_DTI_PENDING, - WA_SEG_DONE, - WA_SEG_ERROR, - WA_SEG_ABORTED, -}; - -static void wa_xfer_delayed_run(struct wa_rpipe *); -static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting); - -/* - * Life cycle governed by 'struct urb' (the refcount of the struct is - * that of the 'struct urb' and usb_free_urb() would free the whole - * struct). - */ -struct wa_seg { - struct urb tr_urb; /* transfer request urb. */ - struct urb *isoc_pack_desc_urb; /* for isoc packet descriptor. */ - struct urb *dto_urb; /* for data output. */ - struct list_head list_node; /* for rpipe->req_list */ - struct wa_xfer *xfer; /* out xfer */ - u8 index; /* which segment we are */ - int isoc_frame_count; /* number of isoc frames in this segment. */ - int isoc_frame_offset; /* starting frame offset in the xfer URB. */ - /* Isoc frame that the current transfer buffer corresponds to. */ - int isoc_frame_index; - int isoc_size; /* size of all isoc frames sent by this seg. */ - enum wa_seg_status status; - ssize_t result; /* bytes xfered or error */ - struct wa_xfer_hdr xfer_hdr; -}; - -static inline void wa_seg_init(struct wa_seg *seg) -{ - usb_init_urb(&seg->tr_urb); - - /* set the remaining memory to 0. */ - memset(((void *)seg) + sizeof(seg->tr_urb), 0, - sizeof(*seg) - sizeof(seg->tr_urb)); -} - -/* - * Protected by xfer->lock - * - */ -struct wa_xfer { - struct kref refcnt; - struct list_head list_node; - spinlock_t lock; - u32 id; - - struct wahc *wa; /* Wire adapter we are plugged to */ - struct usb_host_endpoint *ep; - struct urb *urb; /* URB we are transferring for */ - struct wa_seg **seg; /* transfer segments */ - u8 segs, segs_submitted, segs_done; - unsigned is_inbound:1; - unsigned is_dma:1; - size_t seg_size; - int result; - - gfp_t gfp; /* allocation mask */ - - struct wusb_dev *wusb_dev; /* for activity timestamps */ -}; - -static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, - struct wa_seg *seg, int curr_iso_frame); -static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, - int starting_index, enum wa_seg_status status); - -static inline void wa_xfer_init(struct wa_xfer *xfer) -{ - kref_init(&xfer->refcnt); - INIT_LIST_HEAD(&xfer->list_node); - spin_lock_init(&xfer->lock); -} - -/* - * Destroy a transfer structure - * - * Note that freeing xfer->seg[cnt]->tr_urb will free the containing - * xfer->seg[cnt] memory that was allocated by __wa_xfer_setup_segs. - */ -static void wa_xfer_destroy(struct kref *_xfer) -{ - struct wa_xfer *xfer = container_of(_xfer, struct wa_xfer, refcnt); - if (xfer->seg) { - unsigned cnt; - for (cnt = 0; cnt < xfer->segs; cnt++) { - struct wa_seg *seg = xfer->seg[cnt]; - if (seg) { - usb_free_urb(seg->isoc_pack_desc_urb); - if (seg->dto_urb) { - kfree(seg->dto_urb->sg); - usb_free_urb(seg->dto_urb); - } - usb_free_urb(&seg->tr_urb); - } - } - kfree(xfer->seg); - } - kfree(xfer); -} - -static void wa_xfer_get(struct wa_xfer *xfer) -{ - kref_get(&xfer->refcnt); -} - -static void wa_xfer_put(struct wa_xfer *xfer) -{ - kref_put(&xfer->refcnt, wa_xfer_destroy); -} - -/* - * Try to get exclusive access to the DTO endpoint resource. Return true - * if successful. - */ -static inline int __wa_dto_try_get(struct wahc *wa) -{ - return (test_and_set_bit(0, &wa->dto_in_use) == 0); -} - -/* Release the DTO endpoint resource. */ -static inline void __wa_dto_put(struct wahc *wa) -{ - clear_bit_unlock(0, &wa->dto_in_use); -} - -/* Service RPIPEs that are waiting on the DTO resource. */ -static void wa_check_for_delayed_rpipes(struct wahc *wa) -{ - unsigned long flags; - int dto_waiting = 0; - struct wa_rpipe *rpipe; - - spin_lock_irqsave(&wa->rpipe_lock, flags); - while (!list_empty(&wa->rpipe_delayed_list) && !dto_waiting) { - rpipe = list_first_entry(&wa->rpipe_delayed_list, - struct wa_rpipe, list_node); - __wa_xfer_delayed_run(rpipe, &dto_waiting); - /* remove this RPIPE from the list if it is not waiting. */ - if (!dto_waiting) { - pr_debug("%s: RPIPE %d serviced and removed from delayed list.\n", - __func__, - le16_to_cpu(rpipe->descr.wRPipeIndex)); - list_del_init(&rpipe->list_node); - } - } - spin_unlock_irqrestore(&wa->rpipe_lock, flags); -} - -/* add this RPIPE to the end of the delayed RPIPE list. */ -static void wa_add_delayed_rpipe(struct wahc *wa, struct wa_rpipe *rpipe) -{ - unsigned long flags; - - spin_lock_irqsave(&wa->rpipe_lock, flags); - /* add rpipe to the list if it is not already on it. */ - if (list_empty(&rpipe->list_node)) { - pr_debug("%s: adding RPIPE %d to the delayed list.\n", - __func__, le16_to_cpu(rpipe->descr.wRPipeIndex)); - list_add_tail(&rpipe->list_node, &wa->rpipe_delayed_list); - } - spin_unlock_irqrestore(&wa->rpipe_lock, flags); -} - -/* - * xfer is referenced - * - * xfer->lock has to be unlocked - * - * We take xfer->lock for setting the result; this is a barrier - * against drivers/usb/core/hcd.c:unlink1() being called after we call - * usb_hcd_giveback_urb() and wa_urb_dequeue() trying to get a - * reference to the transfer. - */ -static void wa_xfer_giveback(struct wa_xfer *xfer) -{ - unsigned long flags; - - spin_lock_irqsave(&xfer->wa->xfer_list_lock, flags); - list_del_init(&xfer->list_node); - usb_hcd_unlink_urb_from_ep(&(xfer->wa->wusb->usb_hcd), xfer->urb); - spin_unlock_irqrestore(&xfer->wa->xfer_list_lock, flags); - /* FIXME: segmentation broken -- kills DWA */ - wusbhc_giveback_urb(xfer->wa->wusb, xfer->urb, xfer->result); - wa_put(xfer->wa); - wa_xfer_put(xfer); -} - -/* - * xfer is referenced - * - * xfer->lock has to be unlocked - */ -static void wa_xfer_completion(struct wa_xfer *xfer) -{ - if (xfer->wusb_dev) - wusb_dev_put(xfer->wusb_dev); - rpipe_put(xfer->ep->hcpriv); - wa_xfer_giveback(xfer); -} - -/* - * Initialize a transfer's ID - * - * We need to use a sequential number; if we use the pointer or the - * hash of the pointer, it can repeat over sequential transfers and - * then it will confuse the HWA....wonder why in hell they put a 32 - * bit handle in there then. - */ -static void wa_xfer_id_init(struct wa_xfer *xfer) -{ - xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count); -} - -/* Return the xfer's ID. */ -static inline u32 wa_xfer_id(struct wa_xfer *xfer) -{ - return xfer->id; -} - -/* Return the xfer's ID in transport format (little endian). */ -static inline __le32 wa_xfer_id_le32(struct wa_xfer *xfer) -{ - return cpu_to_le32(xfer->id); -} - -/* - * If transfer is done, wrap it up and return true - * - * xfer->lock has to be locked - */ -static unsigned __wa_xfer_is_done(struct wa_xfer *xfer) -{ - struct device *dev = &xfer->wa->usb_iface->dev; - unsigned result, cnt; - struct wa_seg *seg; - struct urb *urb = xfer->urb; - unsigned found_short = 0; - - result = xfer->segs_done == xfer->segs_submitted; - if (result == 0) - goto out; - urb->actual_length = 0; - for (cnt = 0; cnt < xfer->segs; cnt++) { - seg = xfer->seg[cnt]; - switch (seg->status) { - case WA_SEG_DONE: - if (found_short && seg->result > 0) { - dev_dbg(dev, "xfer %p ID %08X#%u: bad short segments (%zu)\n", - xfer, wa_xfer_id(xfer), cnt, - seg->result); - urb->status = -EINVAL; - goto out; - } - urb->actual_length += seg->result; - if (!(usb_pipeisoc(xfer->urb->pipe)) - && seg->result < xfer->seg_size - && cnt != xfer->segs-1) - found_short = 1; - dev_dbg(dev, "xfer %p ID %08X#%u: DONE short %d " - "result %zu urb->actual_length %d\n", - xfer, wa_xfer_id(xfer), seg->index, found_short, - seg->result, urb->actual_length); - break; - case WA_SEG_ERROR: - xfer->result = seg->result; - dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zi(0x%08zX)\n", - xfer, wa_xfer_id(xfer), seg->index, seg->result, - seg->result); - goto out; - case WA_SEG_ABORTED: - xfer->result = seg->result; - dev_dbg(dev, "xfer %p ID %08X#%u: ABORTED result %zi(0x%08zX)\n", - xfer, wa_xfer_id(xfer), seg->index, seg->result, - seg->result); - goto out; - default: - dev_warn(dev, "xfer %p ID %08X#%u: is_done bad state %d\n", - xfer, wa_xfer_id(xfer), cnt, seg->status); - xfer->result = -EINVAL; - goto out; - } - } - xfer->result = 0; -out: - return result; -} - -/* - * Mark the given segment as done. Return true if this completes the xfer. - * This should only be called for segs that have been submitted to an RPIPE. - * Delayed segs are not marked as submitted so they do not need to be marked - * as done when cleaning up. - * - * xfer->lock has to be locked - */ -static unsigned __wa_xfer_mark_seg_as_done(struct wa_xfer *xfer, - struct wa_seg *seg, enum wa_seg_status status) -{ - seg->status = status; - xfer->segs_done++; - - /* check for done. */ - return __wa_xfer_is_done(xfer); -} - -/* - * Search for a transfer list ID on the HCD's URB list - * - * For 32 bit architectures, we use the pointer itself; for 64 bits, a - * 32-bit hash of the pointer. - * - * @returns NULL if not found. - */ -static struct wa_xfer *wa_xfer_get_by_id(struct wahc *wa, u32 id) -{ - unsigned long flags; - struct wa_xfer *xfer_itr; - spin_lock_irqsave(&wa->xfer_list_lock, flags); - list_for_each_entry(xfer_itr, &wa->xfer_list, list_node) { - if (id == xfer_itr->id) { - wa_xfer_get(xfer_itr); - goto out; - } - } - xfer_itr = NULL; -out: - spin_unlock_irqrestore(&wa->xfer_list_lock, flags); - return xfer_itr; -} - -struct wa_xfer_abort_buffer { - struct urb urb; - struct wahc *wa; - struct wa_xfer_abort cmd; -}; - -static void __wa_xfer_abort_cb(struct urb *urb) -{ - struct wa_xfer_abort_buffer *b = urb->context; - struct wahc *wa = b->wa; - - /* - * If the abort request URB failed, then the HWA did not get the abort - * command. Forcibly clean up the xfer without waiting for a Transfer - * Result from the HWA. - */ - if (urb->status < 0) { - struct wa_xfer *xfer; - struct device *dev = &wa->usb_iface->dev; - - xfer = wa_xfer_get_by_id(wa, le32_to_cpu(b->cmd.dwTransferID)); - dev_err(dev, "%s: Transfer Abort request failed. result: %d\n", - __func__, urb->status); - if (xfer) { - unsigned long flags; - int done, seg_index = 0; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - - dev_err(dev, "%s: cleaning up xfer %p ID 0x%08X.\n", - __func__, xfer, wa_xfer_id(xfer)); - spin_lock_irqsave(&xfer->lock, flags); - /* skip done segs. */ - while (seg_index < xfer->segs) { - struct wa_seg *seg = xfer->seg[seg_index]; - - if ((seg->status == WA_SEG_DONE) || - (seg->status == WA_SEG_ERROR)) { - ++seg_index; - } else { - break; - } - } - /* mark remaining segs as aborted. */ - wa_complete_remaining_xfer_segs(xfer, seg_index, - WA_SEG_ABORTED); - done = __wa_xfer_is_done(xfer); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - wa_xfer_delayed_run(rpipe); - wa_xfer_put(xfer); - } else { - dev_err(dev, "%s: xfer ID 0x%08X already gone.\n", - __func__, le32_to_cpu(b->cmd.dwTransferID)); - } - } - - wa_put(wa); /* taken in __wa_xfer_abort */ - usb_put_urb(&b->urb); -} - -/* - * Aborts an ongoing transaction - * - * Assumes the transfer is referenced and locked and in a submitted - * state (mainly that there is an endpoint/rpipe assigned). - * - * The callback (see above) does nothing but freeing up the data by - * putting the URB. Because the URB is allocated at the head of the - * struct, the whole space we allocated is kfreed. * - */ -static int __wa_xfer_abort(struct wa_xfer *xfer) -{ - int result = -ENOMEM; - struct device *dev = &xfer->wa->usb_iface->dev; - struct wa_xfer_abort_buffer *b; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - - b = kmalloc(sizeof(*b), GFP_ATOMIC); - if (b == NULL) - goto error_kmalloc; - b->cmd.bLength = sizeof(b->cmd); - b->cmd.bRequestType = WA_XFER_ABORT; - b->cmd.wRPipe = rpipe->descr.wRPipeIndex; - b->cmd.dwTransferID = wa_xfer_id_le32(xfer); - b->wa = wa_get(xfer->wa); - - usb_init_urb(&b->urb); - usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev, - usb_sndbulkpipe(xfer->wa->usb_dev, - xfer->wa->dto_epd->bEndpointAddress), - &b->cmd, sizeof(b->cmd), __wa_xfer_abort_cb, b); - result = usb_submit_urb(&b->urb, GFP_ATOMIC); - if (result < 0) - goto error_submit; - return result; /* callback frees! */ - - -error_submit: - wa_put(xfer->wa); - if (printk_ratelimit()) - dev_err(dev, "xfer %p: Can't submit abort request: %d\n", - xfer, result); - kfree(b); -error_kmalloc: - return result; - -} - -/* - * Calculate the number of isoc frames starting from isoc_frame_offset - * that will fit a in transfer segment. - */ -static int __wa_seg_calculate_isoc_frame_count(struct wa_xfer *xfer, - int isoc_frame_offset, int *total_size) -{ - int segment_size = 0, frame_count = 0; - int index = isoc_frame_offset; - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - - while ((index < xfer->urb->number_of_packets) - && ((segment_size + iso_frame_desc[index].length) - <= xfer->seg_size)) { - /* - * For Alereon HWA devices, only include an isoc frame in an - * out segment if it is physically contiguous with the previous - * frame. This is required because those devices expect - * the isoc frames to be sent as a single USB transaction as - * opposed to one transaction per frame with standard HWA. - */ - if ((xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) - && (xfer->is_inbound == 0) - && (index > isoc_frame_offset) - && ((iso_frame_desc[index - 1].offset + - iso_frame_desc[index - 1].length) != - iso_frame_desc[index].offset)) - break; - - /* this frame fits. count it. */ - ++frame_count; - segment_size += iso_frame_desc[index].length; - - /* move to the next isoc frame. */ - ++index; - } - - *total_size = segment_size; - return frame_count; -} - -/* - * - * @returns < 0 on error, transfer segment request size if ok - */ -static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer, - enum wa_xfer_type *pxfer_type) -{ - ssize_t result; - struct device *dev = &xfer->wa->usb_iface->dev; - size_t maxpktsize; - struct urb *urb = xfer->urb; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - - switch (rpipe->descr.bmAttribute & 0x3) { - case USB_ENDPOINT_XFER_CONTROL: - *pxfer_type = WA_XFER_TYPE_CTL; - result = sizeof(struct wa_xfer_ctl); - break; - case USB_ENDPOINT_XFER_INT: - case USB_ENDPOINT_XFER_BULK: - *pxfer_type = WA_XFER_TYPE_BI; - result = sizeof(struct wa_xfer_bi); - break; - case USB_ENDPOINT_XFER_ISOC: - *pxfer_type = WA_XFER_TYPE_ISO; - result = sizeof(struct wa_xfer_hwaiso); - break; - default: - /* never happens */ - BUG(); - result = -EINVAL; /* shut gcc up */ - } - xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0; - xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0; - - maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize); - xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks) - * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1); - /* Compute the segment size and make sure it is a multiple of - * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of - * a check (FIXME) */ - if (xfer->seg_size < maxpktsize) { - dev_err(dev, - "HW BUG? seg_size %zu smaller than maxpktsize %zu\n", - xfer->seg_size, maxpktsize); - result = -EINVAL; - goto error; - } - xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize; - if ((rpipe->descr.bmAttribute & 0x3) == USB_ENDPOINT_XFER_ISOC) { - int index = 0; - - xfer->segs = 0; - /* - * loop over urb->number_of_packets to determine how many - * xfer segments will be needed to send the isoc frames. - */ - while (index < urb->number_of_packets) { - int seg_size; /* don't care. */ - index += __wa_seg_calculate_isoc_frame_count(xfer, - index, &seg_size); - ++xfer->segs; - } - } else { - xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length, - xfer->seg_size); - if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL) - xfer->segs = 1; - } - - if (xfer->segs > WA_SEGS_MAX) { - dev_err(dev, "BUG? oops, number of segments %zu bigger than %d\n", - (urb->transfer_buffer_length/xfer->seg_size), - WA_SEGS_MAX); - result = -EINVAL; - goto error; - } -error: - return result; -} - -static void __wa_setup_isoc_packet_descr( - struct wa_xfer_packet_info_hwaiso *packet_desc, - struct wa_xfer *xfer, - struct wa_seg *seg) { - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - int frame_index; - - /* populate isoc packet descriptor. */ - packet_desc->bPacketType = WA_XFER_ISO_PACKET_INFO; - packet_desc->wLength = cpu_to_le16(struct_size(packet_desc, - PacketLength, - seg->isoc_frame_count)); - for (frame_index = 0; frame_index < seg->isoc_frame_count; - ++frame_index) { - int offset_index = frame_index + seg->isoc_frame_offset; - packet_desc->PacketLength[frame_index] = - cpu_to_le16(iso_frame_desc[offset_index].length); - } -} - - -/* Fill in the common request header and xfer-type specific data. */ -static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, - struct wa_xfer_hdr *xfer_hdr0, - enum wa_xfer_type xfer_type, - size_t xfer_hdr_size) -{ - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - struct wa_seg *seg = xfer->seg[0]; - - xfer_hdr0 = &seg->xfer_hdr; - xfer_hdr0->bLength = xfer_hdr_size; - xfer_hdr0->bRequestType = xfer_type; - xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex; - xfer_hdr0->dwTransferID = wa_xfer_id_le32(xfer); - xfer_hdr0->bTransferSegment = 0; - switch (xfer_type) { - case WA_XFER_TYPE_CTL: { - struct wa_xfer_ctl *xfer_ctl = - container_of(xfer_hdr0, struct wa_xfer_ctl, hdr); - xfer_ctl->bmAttribute = xfer->is_inbound ? 1 : 0; - memcpy(&xfer_ctl->baSetupData, xfer->urb->setup_packet, - sizeof(xfer_ctl->baSetupData)); - break; - } - case WA_XFER_TYPE_BI: - break; - case WA_XFER_TYPE_ISO: { - struct wa_xfer_hwaiso *xfer_iso = - container_of(xfer_hdr0, struct wa_xfer_hwaiso, hdr); - struct wa_xfer_packet_info_hwaiso *packet_desc = - ((void *)xfer_iso) + xfer_hdr_size; - - /* populate the isoc section of the transfer request. */ - xfer_iso->dwNumOfPackets = cpu_to_le32(seg->isoc_frame_count); - /* populate isoc packet descriptor. */ - __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); - break; - } - default: - BUG(); - }; -} - -/* - * Callback for the OUT data phase of the segment request - * - * Check wa_seg_tr_cb(); most comments also apply here because this - * function does almost the same thing and they work closely - * together. - * - * If the seg request has failed but this DTO phase has succeeded, - * wa_seg_tr_cb() has already failed the segment and moved the - * status to WA_SEG_ERROR, so this will go through 'case 0' and - * effectively do nothing. - */ -static void wa_seg_dto_cb(struct urb *urb) -{ - struct wa_seg *seg = urb->context; - struct wa_xfer *xfer = seg->xfer; - struct wahc *wa; - struct device *dev; - struct wa_rpipe *rpipe; - unsigned long flags; - unsigned rpipe_ready = 0; - int data_send_done = 1, release_dto = 0, holding_dto = 0; - u8 done = 0; - int result; - - /* free the sg if it was used. */ - kfree(urb->sg); - urb->sg = NULL; - - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - if (usb_pipeisoc(xfer->urb->pipe)) { - /* Alereon HWA sends all isoc frames in a single transfer. */ - if (wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) - seg->isoc_frame_index += seg->isoc_frame_count; - else - seg->isoc_frame_index += 1; - if (seg->isoc_frame_index < seg->isoc_frame_count) { - data_send_done = 0; - holding_dto = 1; /* checked in error cases. */ - /* - * if this is the last isoc frame of the segment, we - * can release DTO after sending this frame. - */ - if ((seg->isoc_frame_index + 1) >= - seg->isoc_frame_count) - release_dto = 1; - } - dev_dbg(dev, "xfer 0x%08X#%u: isoc frame = %d, holding_dto = %d, release_dto = %d.\n", - wa_xfer_id(xfer), seg->index, seg->isoc_frame_index, - holding_dto, release_dto); - } - spin_unlock_irqrestore(&xfer->lock, flags); - - switch (urb->status) { - case 0: - spin_lock_irqsave(&xfer->lock, flags); - seg->result += urb->actual_length; - if (data_send_done) { - dev_dbg(dev, "xfer 0x%08X#%u: data out done (%zu bytes)\n", - wa_xfer_id(xfer), seg->index, seg->result); - if (seg->status < WA_SEG_PENDING) - seg->status = WA_SEG_PENDING; - } else { - /* should only hit this for isoc xfers. */ - /* - * Populate the dto URB with the next isoc frame buffer, - * send the URB and release DTO if we no longer need it. - */ - __wa_populate_dto_urb_isoc(xfer, seg, - seg->isoc_frame_offset + seg->isoc_frame_index); - - /* resubmit the URB with the next isoc frame. */ - /* take a ref on resubmit. */ - wa_xfer_get(xfer); - result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "xfer 0x%08X#%u: DTO submit failed: %d\n", - wa_xfer_id(xfer), seg->index, result); - spin_unlock_irqrestore(&xfer->lock, flags); - goto error_dto_submit; - } - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (release_dto) { - __wa_dto_put(wa); - wa_check_for_delayed_rpipes(wa); - } - break; - case -ECONNRESET: /* URB unlinked; no need to do anything */ - case -ENOENT: /* as it was done by the who unlinked us */ - if (holding_dto) { - __wa_dto_put(wa); - wa_check_for_delayed_rpipes(wa); - } - break; - default: /* Other errors ... */ - dev_err(dev, "xfer 0x%08X#%u: data out error %d\n", - wa_xfer_id(xfer), seg->index, urb->status); - goto error_default; - } - - /* taken when this URB was submitted. */ - wa_xfer_put(xfer); - return; - -error_dto_submit: - /* taken on resubmit attempt. */ - wa_xfer_put(xfer); -error_default: - spin_lock_irqsave(&xfer->lock, flags); - rpipe = xfer->ep->hcpriv; - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n"); - wa_reset_all(wa); - } - if (seg->status != WA_SEG_ERROR) { - seg->result = urb->status; - __wa_xfer_abort(xfer); - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (holding_dto) { - __wa_dto_put(wa); - wa_check_for_delayed_rpipes(wa); - } - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - /* taken when this URB was submitted. */ - wa_xfer_put(xfer); -} - -/* - * Callback for the isoc packet descriptor phase of the segment request - * - * Check wa_seg_tr_cb(); most comments also apply here because this - * function does almost the same thing and they work closely - * together. - * - * If the seg request has failed but this phase has succeeded, - * wa_seg_tr_cb() has already failed the segment and moved the - * status to WA_SEG_ERROR, so this will go through 'case 0' and - * effectively do nothing. - */ -static void wa_seg_iso_pack_desc_cb(struct urb *urb) -{ - struct wa_seg *seg = urb->context; - struct wa_xfer *xfer = seg->xfer; - struct wahc *wa; - struct device *dev; - struct wa_rpipe *rpipe; - unsigned long flags; - unsigned rpipe_ready = 0; - u8 done = 0; - - switch (urb->status) { - case 0: - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - dev_dbg(dev, "iso xfer %08X#%u: packet descriptor done\n", - wa_xfer_id(xfer), seg->index); - if (xfer->is_inbound && seg->status < WA_SEG_PENDING) - seg->status = WA_SEG_PENDING; - spin_unlock_irqrestore(&xfer->lock, flags); - break; - case -ECONNRESET: /* URB unlinked; no need to do anything */ - case -ENOENT: /* as it was done by the who unlinked us */ - break; - default: /* Other errors ... */ - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - rpipe = xfer->ep->hcpriv; - pr_err_ratelimited("iso xfer %08X#%u: packet descriptor error %d\n", - wa_xfer_id(xfer), seg->index, urb->status); - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "iso xfer: URB max acceptable errors exceeded, resetting device\n"); - wa_reset_all(wa); - } - if (seg->status != WA_SEG_ERROR) { - usb_unlink_urb(seg->dto_urb); - seg->result = urb->status; - __wa_xfer_abort(xfer); - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, - WA_SEG_ERROR); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - } - /* taken when this URB was submitted. */ - wa_xfer_put(xfer); -} - -/* - * Callback for the segment request - * - * If successful transition state (unless already transitioned or - * outbound transfer); otherwise, take a note of the error, mark this - * segment done and try completion. - * - * Note we don't access until we are sure that the transfer hasn't - * been cancelled (ECONNRESET, ENOENT), which could mean that - * seg->xfer could be already gone. - * - * We have to check before setting the status to WA_SEG_PENDING - * because sometimes the xfer result callback arrives before this - * callback (geeeeeeze), so it might happen that we are already in - * another state. As well, we don't set it if the transfer is not inbound, - * as in that case, wa_seg_dto_cb will do it when the OUT data phase - * finishes. - */ -static void wa_seg_tr_cb(struct urb *urb) -{ - struct wa_seg *seg = urb->context; - struct wa_xfer *xfer = seg->xfer; - struct wahc *wa; - struct device *dev; - struct wa_rpipe *rpipe; - unsigned long flags; - unsigned rpipe_ready; - u8 done = 0; - - switch (urb->status) { - case 0: - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - dev_dbg(dev, "xfer %p ID 0x%08X#%u: request done\n", - xfer, wa_xfer_id(xfer), seg->index); - if (xfer->is_inbound && - seg->status < WA_SEG_PENDING && - !(usb_pipeisoc(xfer->urb->pipe))) - seg->status = WA_SEG_PENDING; - spin_unlock_irqrestore(&xfer->lock, flags); - break; - case -ECONNRESET: /* URB unlinked; no need to do anything */ - case -ENOENT: /* as it was done by the who unlinked us */ - break; - default: /* Other errors ... */ - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - rpipe = xfer->ep->hcpriv; - if (printk_ratelimit()) - dev_err(dev, "xfer %p ID 0x%08X#%u: request error %d\n", - xfer, wa_xfer_id(xfer), seg->index, - urb->status); - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "DTO: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - } - usb_unlink_urb(seg->isoc_pack_desc_urb); - usb_unlink_urb(seg->dto_urb); - seg->result = urb->status; - __wa_xfer_abort(xfer); - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - } - /* taken when this URB was submitted. */ - wa_xfer_put(xfer); -} - -/* - * Allocate an SG list to store bytes_to_transfer bytes and copy the - * subset of the in_sg that matches the buffer subset - * we are about to transfer. - */ -static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, - const unsigned int bytes_transferred, - const unsigned int bytes_to_transfer, int *out_num_sgs) -{ - struct scatterlist *out_sg; - unsigned int bytes_processed = 0, offset_into_current_page_data = 0, - nents; - struct scatterlist *current_xfer_sg = in_sg; - struct scatterlist *current_seg_sg, *last_seg_sg; - - /* skip previously transferred pages. */ - while ((current_xfer_sg) && - (bytes_processed < bytes_transferred)) { - bytes_processed += current_xfer_sg->length; - - /* advance the sg if current segment starts on or past the - next page. */ - if (bytes_processed <= bytes_transferred) - current_xfer_sg = sg_next(current_xfer_sg); - } - - /* the data for the current segment starts in current_xfer_sg. - calculate the offset. */ - if (bytes_processed > bytes_transferred) { - offset_into_current_page_data = current_xfer_sg->length - - (bytes_processed - bytes_transferred); - } - - /* calculate the number of pages needed by this segment. */ - nents = DIV_ROUND_UP((bytes_to_transfer + - offset_into_current_page_data + - current_xfer_sg->offset), - PAGE_SIZE); - - out_sg = kmalloc((sizeof(struct scatterlist) * nents), GFP_ATOMIC); - if (out_sg) { - sg_init_table(out_sg, nents); - - /* copy the portion of the incoming SG that correlates to the - * data to be transferred by this segment to the segment SG. */ - last_seg_sg = current_seg_sg = out_sg; - bytes_processed = 0; - - /* reset nents and calculate the actual number of sg entries - needed. */ - nents = 0; - while ((bytes_processed < bytes_to_transfer) && - current_seg_sg && current_xfer_sg) { - unsigned int page_len = min((current_xfer_sg->length - - offset_into_current_page_data), - (bytes_to_transfer - bytes_processed)); - - sg_set_page(current_seg_sg, sg_page(current_xfer_sg), - page_len, - current_xfer_sg->offset + - offset_into_current_page_data); - - bytes_processed += page_len; - - last_seg_sg = current_seg_sg; - current_seg_sg = sg_next(current_seg_sg); - current_xfer_sg = sg_next(current_xfer_sg); - - /* only the first page may require additional offset. */ - offset_into_current_page_data = 0; - nents++; - } - - /* update num_sgs and terminate the list since we may have - * concatenated pages. */ - sg_mark_end(last_seg_sg); - *out_num_sgs = nents; - } - - return out_sg; -} - -/* - * Populate DMA buffer info for the isoc dto urb. - */ -static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, - struct wa_seg *seg, int curr_iso_frame) -{ - seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; - /* dto urb buffer address pulled from iso_frame_desc. */ - seg->dto_urb->transfer_dma = xfer->urb->transfer_dma + - xfer->urb->iso_frame_desc[curr_iso_frame].offset; - /* The Alereon HWA sends a single URB with all isoc segs. */ - if (xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) - seg->dto_urb->transfer_buffer_length = seg->isoc_size; - else - seg->dto_urb->transfer_buffer_length = - xfer->urb->iso_frame_desc[curr_iso_frame].length; -} - -/* - * Populate buffer ptr and size, DMA buffer or SG list for the dto urb. - */ -static int __wa_populate_dto_urb(struct wa_xfer *xfer, - struct wa_seg *seg, size_t buf_itr_offset, size_t buf_itr_size) -{ - int result = 0; - - if (xfer->is_dma) { - seg->dto_urb->transfer_dma = - xfer->urb->transfer_dma + buf_itr_offset; - seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; - } else { - /* do buffer or SG processing. */ - seg->dto_urb->transfer_flags &= - ~URB_NO_TRANSFER_DMA_MAP; - /* this should always be 0 before a resubmit. */ - seg->dto_urb->num_mapped_sgs = 0; - - if (xfer->urb->transfer_buffer) { - seg->dto_urb->transfer_buffer = - xfer->urb->transfer_buffer + - buf_itr_offset; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; - } else { - seg->dto_urb->transfer_buffer = NULL; - - /* - * allocate an SG list to store seg_size bytes - * and copy the subset of the xfer->urb->sg that - * matches the buffer subset we are about to - * read. - */ - seg->dto_urb->sg = wa_xfer_create_subset_sg( - xfer->urb->sg, - buf_itr_offset, buf_itr_size, - &(seg->dto_urb->num_sgs)); - if (!(seg->dto_urb->sg)) - result = -ENOMEM; - } - } - seg->dto_urb->transfer_buffer_length = buf_itr_size; - - return result; -} - -/* - * Allocate the segs array and initialize each of them - * - * The segments are freed by wa_xfer_destroy() when the xfer use count - * drops to zero; however, because each segment is given the same life - * cycle as the USB URB it contains, it is actually freed by - * usb_put_urb() on the contained USB URB (twisted, eh?). - */ -static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) -{ - int result, cnt, isoc_frame_offset = 0; - size_t alloc_size = sizeof(*xfer->seg[0]) - - sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size; - struct usb_device *usb_dev = xfer->wa->usb_dev; - const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd; - struct wa_seg *seg; - size_t buf_itr, buf_size, buf_itr_size; - - result = -ENOMEM; - xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC); - if (xfer->seg == NULL) - goto error_segs_kzalloc; - buf_itr = 0; - buf_size = xfer->urb->transfer_buffer_length; - for (cnt = 0; cnt < xfer->segs; cnt++) { - size_t iso_pkt_descr_size = 0; - int seg_isoc_frame_count = 0, seg_isoc_size = 0; - - /* - * Adjust the size of the segment object to contain space for - * the isoc packet descriptor buffer. - */ - if (usb_pipeisoc(xfer->urb->pipe)) { - seg_isoc_frame_count = - __wa_seg_calculate_isoc_frame_count(xfer, - isoc_frame_offset, &seg_isoc_size); - - iso_pkt_descr_size = - sizeof(struct wa_xfer_packet_info_hwaiso) + - (seg_isoc_frame_count * sizeof(__le16)); - } - result = -ENOMEM; - seg = xfer->seg[cnt] = kmalloc(alloc_size + iso_pkt_descr_size, - GFP_ATOMIC); - if (seg == NULL) - goto error_seg_kmalloc; - wa_seg_init(seg); - seg->xfer = xfer; - seg->index = cnt; - usb_fill_bulk_urb(&seg->tr_urb, usb_dev, - usb_sndbulkpipe(usb_dev, - dto_epd->bEndpointAddress), - &seg->xfer_hdr, xfer_hdr_size, - wa_seg_tr_cb, seg); - buf_itr_size = min(buf_size, xfer->seg_size); - - if (usb_pipeisoc(xfer->urb->pipe)) { - seg->isoc_frame_count = seg_isoc_frame_count; - seg->isoc_frame_offset = isoc_frame_offset; - seg->isoc_size = seg_isoc_size; - /* iso packet descriptor. */ - seg->isoc_pack_desc_urb = - usb_alloc_urb(0, GFP_ATOMIC); - if (seg->isoc_pack_desc_urb == NULL) - goto error_iso_pack_desc_alloc; - /* - * The buffer for the isoc packet descriptor starts - * after the transfer request header in the - * segment object memory buffer. - */ - usb_fill_bulk_urb( - seg->isoc_pack_desc_urb, usb_dev, - usb_sndbulkpipe(usb_dev, - dto_epd->bEndpointAddress), - (void *)(&seg->xfer_hdr) + - xfer_hdr_size, - iso_pkt_descr_size, - wa_seg_iso_pack_desc_cb, seg); - - /* adjust starting frame offset for next seg. */ - isoc_frame_offset += seg_isoc_frame_count; - } - - if (xfer->is_inbound == 0 && buf_size > 0) { - /* outbound data. */ - seg->dto_urb = usb_alloc_urb(0, GFP_ATOMIC); - if (seg->dto_urb == NULL) - goto error_dto_alloc; - usb_fill_bulk_urb( - seg->dto_urb, usb_dev, - usb_sndbulkpipe(usb_dev, - dto_epd->bEndpointAddress), - NULL, 0, wa_seg_dto_cb, seg); - - if (usb_pipeisoc(xfer->urb->pipe)) { - /* - * Fill in the xfer buffer information for the - * first isoc frame. Subsequent frames in this - * segment will be filled in and sent from the - * DTO completion routine, if needed. - */ - __wa_populate_dto_urb_isoc(xfer, seg, - seg->isoc_frame_offset); - } else { - /* fill in the xfer buffer information. */ - result = __wa_populate_dto_urb(xfer, seg, - buf_itr, buf_itr_size); - if (result < 0) - goto error_seg_outbound_populate; - - buf_itr += buf_itr_size; - buf_size -= buf_itr_size; - } - } - seg->status = WA_SEG_READY; - } - return 0; - - /* - * Free the memory for the current segment which failed to init. - * Use the fact that cnt is left at were it failed. The remaining - * segments will be cleaned up by wa_xfer_destroy. - */ -error_seg_outbound_populate: - usb_free_urb(xfer->seg[cnt]->dto_urb); -error_dto_alloc: - usb_free_urb(xfer->seg[cnt]->isoc_pack_desc_urb); -error_iso_pack_desc_alloc: - kfree(xfer->seg[cnt]); - xfer->seg[cnt] = NULL; -error_seg_kmalloc: -error_segs_kzalloc: - return result; -} - -/* - * Allocates all the stuff needed to submit a transfer - * - * Breaks the whole data buffer in a list of segments, each one has a - * structure allocated to it and linked in xfer->seg[index] - * - * FIXME: merge setup_segs() and the last part of this function, no - * need to do two for loops when we could run everything in a - * single one - */ -static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb) -{ - int result; - struct device *dev = &xfer->wa->usb_iface->dev; - enum wa_xfer_type xfer_type = 0; /* shut up GCC */ - size_t xfer_hdr_size, cnt, transfer_size; - struct wa_xfer_hdr *xfer_hdr0, *xfer_hdr; - - result = __wa_xfer_setup_sizes(xfer, &xfer_type); - if (result < 0) - goto error_setup_sizes; - xfer_hdr_size = result; - result = __wa_xfer_setup_segs(xfer, xfer_hdr_size); - if (result < 0) { - dev_err(dev, "xfer %p: Failed to allocate %d segments: %d\n", - xfer, xfer->segs, result); - goto error_setup_segs; - } - /* Fill the first header */ - xfer_hdr0 = &xfer->seg[0]->xfer_hdr; - wa_xfer_id_init(xfer); - __wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size); - - /* Fill remaining headers */ - xfer_hdr = xfer_hdr0; - if (xfer_type == WA_XFER_TYPE_ISO) { - xfer_hdr0->dwTransferLength = - cpu_to_le32(xfer->seg[0]->isoc_size); - for (cnt = 1; cnt < xfer->segs; cnt++) { - struct wa_xfer_packet_info_hwaiso *packet_desc; - struct wa_seg *seg = xfer->seg[cnt]; - struct wa_xfer_hwaiso *xfer_iso; - - xfer_hdr = &seg->xfer_hdr; - xfer_iso = container_of(xfer_hdr, - struct wa_xfer_hwaiso, hdr); - packet_desc = ((void *)xfer_hdr) + xfer_hdr_size; - /* - * Copy values from the 0th header. Segment specific - * values are set below. - */ - memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); - xfer_hdr->bTransferSegment = cnt; - xfer_hdr->dwTransferLength = - cpu_to_le32(seg->isoc_size); - xfer_iso->dwNumOfPackets = - cpu_to_le32(seg->isoc_frame_count); - __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); - seg->status = WA_SEG_READY; - } - } else { - transfer_size = urb->transfer_buffer_length; - xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ? - cpu_to_le32(xfer->seg_size) : - cpu_to_le32(transfer_size); - transfer_size -= xfer->seg_size; - for (cnt = 1; cnt < xfer->segs; cnt++) { - xfer_hdr = &xfer->seg[cnt]->xfer_hdr; - memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); - xfer_hdr->bTransferSegment = cnt; - xfer_hdr->dwTransferLength = - transfer_size > xfer->seg_size ? - cpu_to_le32(xfer->seg_size) - : cpu_to_le32(transfer_size); - xfer->seg[cnt]->status = WA_SEG_READY; - transfer_size -= xfer->seg_size; - } - } - xfer_hdr->bTransferSegment |= 0x80; /* this is the last segment */ - result = 0; -error_setup_segs: -error_setup_sizes: - return result; -} - -/* - * - * - * rpipe->seg_lock is held! - */ -static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, - struct wa_seg *seg, int *dto_done) -{ - int result; - - /* default to done unless we encounter a multi-frame isoc segment. */ - *dto_done = 1; - - /* - * Take a ref for each segment urb so the xfer cannot disappear until - * all of the callbacks run. - */ - wa_xfer_get(xfer); - /* submit the transfer request. */ - seg->status = WA_SEG_SUBMITTED; - result = usb_submit_urb(&seg->tr_urb, GFP_ATOMIC); - if (result < 0) { - pr_err("%s: xfer %p#%u: REQ submit failed: %d\n", - __func__, xfer, seg->index, result); - wa_xfer_put(xfer); - goto error_tr_submit; - } - /* submit the isoc packet descriptor if present. */ - if (seg->isoc_pack_desc_urb) { - wa_xfer_get(xfer); - result = usb_submit_urb(seg->isoc_pack_desc_urb, GFP_ATOMIC); - seg->isoc_frame_index = 0; - if (result < 0) { - pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n", - __func__, xfer, seg->index, result); - wa_xfer_put(xfer); - goto error_iso_pack_desc_submit; - } - } - /* submit the out data if this is an out request. */ - if (seg->dto_urb) { - struct wahc *wa = xfer->wa; - wa_xfer_get(xfer); - result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); - if (result < 0) { - pr_err("%s: xfer %p#%u: DTO submit failed: %d\n", - __func__, xfer, seg->index, result); - wa_xfer_put(xfer); - goto error_dto_submit; - } - /* - * If this segment contains more than one isoc frame, hold - * onto the dto resource until we send all frames. - * Only applies to non-Alereon devices. - */ - if (((wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) == 0) - && (seg->isoc_frame_count > 1)) - *dto_done = 0; - } - rpipe_avail_dec(rpipe); - return 0; - -error_dto_submit: - usb_unlink_urb(seg->isoc_pack_desc_urb); -error_iso_pack_desc_submit: - usb_unlink_urb(&seg->tr_urb); -error_tr_submit: - seg->status = WA_SEG_ERROR; - seg->result = result; - *dto_done = 1; - return result; -} - -/* - * Execute more queued request segments until the maximum concurrent allowed. - * Return true if the DTO resource was acquired and released. - * - * The ugly unlock/lock sequence on the error path is needed as the - * xfer->lock normally nests the seg_lock and not viceversa. - */ -static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting) -{ - int result, dto_acquired = 0, dto_done = 0; - struct device *dev = &rpipe->wa->usb_iface->dev; - struct wa_seg *seg; - struct wa_xfer *xfer; - unsigned long flags; - - *dto_waiting = 0; - - spin_lock_irqsave(&rpipe->seg_lock, flags); - while (atomic_read(&rpipe->segs_available) > 0 - && !list_empty(&rpipe->seg_list) - && (dto_acquired = __wa_dto_try_get(rpipe->wa))) { - seg = list_first_entry(&(rpipe->seg_list), struct wa_seg, - list_node); - list_del(&seg->list_node); - xfer = seg->xfer; - /* - * Get a reference to the xfer in case the callbacks for the - * URBs submitted by __wa_seg_submit attempt to complete - * the xfer before this function completes. - */ - wa_xfer_get(xfer); - result = __wa_seg_submit(rpipe, xfer, seg, &dto_done); - /* release the dto resource if this RPIPE is done with it. */ - if (dto_done) - __wa_dto_put(rpipe->wa); - dev_dbg(dev, "xfer %p ID %08X#%u submitted from delayed [%d segments available] %d\n", - xfer, wa_xfer_id(xfer), seg->index, - atomic_read(&rpipe->segs_available), result); - if (unlikely(result < 0)) { - int done; - - spin_unlock_irqrestore(&rpipe->seg_lock, flags); - spin_lock_irqsave(&xfer->lock, flags); - __wa_xfer_abort(xfer); - /* - * This seg was marked as submitted when it was put on - * the RPIPE seg_list. Mark it done. - */ - xfer->segs_done++; - done = __wa_xfer_is_done(xfer); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - spin_lock_irqsave(&rpipe->seg_lock, flags); - } - wa_xfer_put(xfer); - } - /* - * Mark this RPIPE as waiting if dto was not acquired, there are - * delayed segs and no active transfers to wake us up later. - */ - if (!dto_acquired && !list_empty(&rpipe->seg_list) - && (atomic_read(&rpipe->segs_available) == - le16_to_cpu(rpipe->descr.wRequests))) - *dto_waiting = 1; - - spin_unlock_irqrestore(&rpipe->seg_lock, flags); - - return dto_done; -} - -static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) -{ - int dto_waiting; - int dto_done = __wa_xfer_delayed_run(rpipe, &dto_waiting); - - /* - * If this RPIPE is waiting on the DTO resource, add it to the tail of - * the waiting list. - * Otherwise, if the WA DTO resource was acquired and released by - * __wa_xfer_delayed_run, another RPIPE may have attempted to acquire - * DTO and failed during that time. Check the delayed list and process - * any waiters. Start searching from the next RPIPE index. - */ - if (dto_waiting) - wa_add_delayed_rpipe(rpipe->wa, rpipe); - else if (dto_done) - wa_check_for_delayed_rpipes(rpipe->wa); -} - -/* - * - * xfer->lock is taken - * - * On failure submitting we just stop submitting and return error; - * wa_urb_enqueue_b() will execute the completion path - */ -static int __wa_xfer_submit(struct wa_xfer *xfer) -{ - int result, dto_acquired = 0, dto_done = 0, dto_waiting = 0; - struct wahc *wa = xfer->wa; - struct device *dev = &wa->usb_iface->dev; - unsigned cnt; - struct wa_seg *seg; - unsigned long flags; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - size_t maxrequests = le16_to_cpu(rpipe->descr.wRequests); - u8 available; - u8 empty; - - spin_lock_irqsave(&wa->xfer_list_lock, flags); - list_add_tail(&xfer->list_node, &wa->xfer_list); - spin_unlock_irqrestore(&wa->xfer_list_lock, flags); - - BUG_ON(atomic_read(&rpipe->segs_available) > maxrequests); - result = 0; - spin_lock_irqsave(&rpipe->seg_lock, flags); - for (cnt = 0; cnt < xfer->segs; cnt++) { - int delay_seg = 1; - - available = atomic_read(&rpipe->segs_available); - empty = list_empty(&rpipe->seg_list); - seg = xfer->seg[cnt]; - if (available && empty) { - /* - * Only attempt to acquire DTO if we have a segment - * to send. - */ - dto_acquired = __wa_dto_try_get(rpipe->wa); - if (dto_acquired) { - delay_seg = 0; - result = __wa_seg_submit(rpipe, xfer, seg, - &dto_done); - dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u submitted\n", - xfer, wa_xfer_id(xfer), cnt, available, - empty); - if (dto_done) - __wa_dto_put(rpipe->wa); - - if (result < 0) { - __wa_xfer_abort(xfer); - goto error_seg_submit; - } - } - } - - if (delay_seg) { - dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u delayed\n", - xfer, wa_xfer_id(xfer), cnt, available, empty); - seg->status = WA_SEG_DELAYED; - list_add_tail(&seg->list_node, &rpipe->seg_list); - } - xfer->segs_submitted++; - } -error_seg_submit: - /* - * Mark this RPIPE as waiting if dto was not acquired, there are - * delayed segs and no active transfers to wake us up later. - */ - if (!dto_acquired && !list_empty(&rpipe->seg_list) - && (atomic_read(&rpipe->segs_available) == - le16_to_cpu(rpipe->descr.wRequests))) - dto_waiting = 1; - spin_unlock_irqrestore(&rpipe->seg_lock, flags); - - if (dto_waiting) - wa_add_delayed_rpipe(rpipe->wa, rpipe); - else if (dto_done) - wa_check_for_delayed_rpipes(rpipe->wa); - - return result; -} - -/* - * Second part of a URB/transfer enqueuement - * - * Assumes this comes from wa_urb_enqueue() [maybe through - * wa_urb_enqueue_run()]. At this point: - * - * xfer->wa filled and refcounted - * xfer->ep filled with rpipe refcounted if - * delayed == 0 - * xfer->urb filled and refcounted (this is the case when called - * from wa_urb_enqueue() as we come from usb_submit_urb() - * and when called by wa_urb_enqueue_run(), as we took an - * extra ref dropped by _run() after we return). - * xfer->gfp filled - * - * If we fail at __wa_xfer_submit(), then we just check if we are done - * and if so, we run the completion procedure. However, if we are not - * yet done, we do nothing and wait for the completion handlers from - * the submitted URBs or from the xfer-result path to kick in. If xfer - * result never kicks in, the xfer will timeout from the USB code and - * dequeue() will be called. - */ -static int wa_urb_enqueue_b(struct wa_xfer *xfer) -{ - int result; - unsigned long flags; - struct urb *urb = xfer->urb; - struct wahc *wa = xfer->wa; - struct wusbhc *wusbhc = wa->wusb; - struct wusb_dev *wusb_dev; - unsigned done; - - result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp); - if (result < 0) { - pr_err("%s: error_rpipe_get\n", __func__); - goto error_rpipe_get; - } - result = -ENODEV; - /* FIXME: segmentation broken -- kills DWA */ - mutex_lock(&wusbhc->mutex); /* get a WUSB dev */ - if (urb->dev == NULL) { - mutex_unlock(&wusbhc->mutex); - pr_err("%s: error usb dev gone\n", __func__); - goto error_dev_gone; - } - wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); - if (wusb_dev == NULL) { - mutex_unlock(&wusbhc->mutex); - dev_err(&(urb->dev->dev), "%s: error wusb dev gone\n", - __func__); - goto error_dev_gone; - } - mutex_unlock(&wusbhc->mutex); - - spin_lock_irqsave(&xfer->lock, flags); - xfer->wusb_dev = wusb_dev; - result = urb->status; - if (urb->status != -EINPROGRESS) { - dev_err(&(urb->dev->dev), "%s: error_dequeued\n", __func__); - goto error_dequeued; - } - - result = __wa_xfer_setup(xfer, urb); - if (result < 0) { - dev_err(&(urb->dev->dev), "%s: error_xfer_setup\n", __func__); - goto error_xfer_setup; - } - /* - * Get a xfer reference since __wa_xfer_submit starts asynchronous - * operations that may try to complete the xfer before this function - * exits. - */ - wa_xfer_get(xfer); - result = __wa_xfer_submit(xfer); - if (result < 0) { - dev_err(&(urb->dev->dev), "%s: error_xfer_submit\n", __func__); - goto error_xfer_submit; - } - spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_put(xfer); - return 0; - - /* - * this is basically wa_xfer_completion() broken up wa_xfer_giveback() - * does a wa_xfer_put() that will call wa_xfer_destroy() and undo - * setup(). - */ -error_xfer_setup: -error_dequeued: - spin_unlock_irqrestore(&xfer->lock, flags); - /* FIXME: segmentation broken, kills DWA */ - if (wusb_dev) - wusb_dev_put(wusb_dev); -error_dev_gone: - rpipe_put(xfer->ep->hcpriv); -error_rpipe_get: - xfer->result = result; - return result; - -error_xfer_submit: - done = __wa_xfer_is_done(xfer); - xfer->result = result; - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - wa_xfer_put(xfer); - /* return success since the completion routine will run. */ - return 0; -} - -/* - * Execute the delayed transfers in the Wire Adapter @wa - * - * We need to be careful here, as dequeue() could be called in the - * middle. That's why we do the whole thing under the - * wa->xfer_list_lock. If dequeue() jumps in, it first locks xfer->lock - * and then checks the list -- so as we would be acquiring in inverse - * order, we move the delayed list to a separate list while locked and then - * submit them without the list lock held. - */ -void wa_urb_enqueue_run(struct work_struct *ws) -{ - struct wahc *wa = container_of(ws, struct wahc, xfer_enqueue_work); - struct wa_xfer *xfer, *next; - struct urb *urb; - LIST_HEAD(tmp_list); - - /* Create a copy of the wa->xfer_delayed_list while holding the lock */ - spin_lock_irq(&wa->xfer_list_lock); - list_cut_position(&tmp_list, &wa->xfer_delayed_list, - wa->xfer_delayed_list.prev); - spin_unlock_irq(&wa->xfer_list_lock); - - /* - * enqueue from temp list without list lock held since wa_urb_enqueue_b - * can take xfer->lock as well as lock mutexes. - */ - list_for_each_entry_safe(xfer, next, &tmp_list, list_node) { - list_del_init(&xfer->list_node); - - urb = xfer->urb; - if (wa_urb_enqueue_b(xfer) < 0) - wa_xfer_giveback(xfer); - usb_put_urb(urb); /* taken when queuing */ - } -} -EXPORT_SYMBOL_GPL(wa_urb_enqueue_run); - -/* - * Process the errored transfers on the Wire Adapter outside of interrupt. - */ -void wa_process_errored_transfers_run(struct work_struct *ws) -{ - struct wahc *wa = container_of(ws, struct wahc, xfer_error_work); - struct wa_xfer *xfer, *next; - LIST_HEAD(tmp_list); - - pr_info("%s: Run delayed STALL processing.\n", __func__); - - /* Create a copy of the wa->xfer_errored_list while holding the lock */ - spin_lock_irq(&wa->xfer_list_lock); - list_cut_position(&tmp_list, &wa->xfer_errored_list, - wa->xfer_errored_list.prev); - spin_unlock_irq(&wa->xfer_list_lock); - - /* - * run rpipe_clear_feature_stalled from temp list without list lock - * held. - */ - list_for_each_entry_safe(xfer, next, &tmp_list, list_node) { - struct usb_host_endpoint *ep; - unsigned long flags; - struct wa_rpipe *rpipe; - - spin_lock_irqsave(&xfer->lock, flags); - ep = xfer->ep; - rpipe = ep->hcpriv; - spin_unlock_irqrestore(&xfer->lock, flags); - - /* clear RPIPE feature stalled without holding a lock. */ - rpipe_clear_feature_stalled(wa, ep); - - /* complete the xfer. This removes it from the tmp list. */ - wa_xfer_completion(xfer); - - /* check for work. */ - wa_xfer_delayed_run(rpipe); - } -} -EXPORT_SYMBOL_GPL(wa_process_errored_transfers_run); - -/* - * Submit a transfer to the Wire Adapter in a delayed way - * - * The process of enqueuing involves possible sleeps() [see - * enqueue_b(), for the rpipe_get() and the mutex_lock()]. If we are - * in an atomic section, we defer the enqueue_b() call--else we call direct. - * - * @urb: We own a reference to it done by the HCI Linux USB stack that - * will be given up by calling usb_hcd_giveback_urb() or by - * returning error from this function -> ergo we don't have to - * refcount it. - */ -int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep, - struct urb *urb, gfp_t gfp) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - struct wa_xfer *xfer; - unsigned long my_flags; - unsigned cant_sleep = irqs_disabled() | in_atomic(); - - if ((urb->transfer_buffer == NULL) - && (urb->sg == NULL) - && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) - && urb->transfer_buffer_length != 0) { - dev_err(dev, "BUG? urb %p: NULL xfer buffer & NODMA\n", urb); - dump_stack(); - } - - spin_lock_irqsave(&wa->xfer_list_lock, my_flags); - result = usb_hcd_link_urb_to_ep(&(wa->wusb->usb_hcd), urb); - spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); - if (result < 0) - goto error_link_urb; - - result = -ENOMEM; - xfer = kzalloc(sizeof(*xfer), gfp); - if (xfer == NULL) - goto error_kmalloc; - - result = -ENOENT; - if (urb->status != -EINPROGRESS) /* cancelled */ - goto error_dequeued; /* before starting? */ - wa_xfer_init(xfer); - xfer->wa = wa_get(wa); - xfer->urb = urb; - xfer->gfp = gfp; - xfer->ep = ep; - urb->hcpriv = xfer; - - dev_dbg(dev, "xfer %p urb %p pipe 0x%02x [%d bytes] %s %s %s\n", - xfer, urb, urb->pipe, urb->transfer_buffer_length, - urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? "dma" : "nodma", - urb->pipe & USB_DIR_IN ? "inbound" : "outbound", - cant_sleep ? "deferred" : "inline"); - - if (cant_sleep) { - usb_get_urb(urb); - spin_lock_irqsave(&wa->xfer_list_lock, my_flags); - list_add_tail(&xfer->list_node, &wa->xfer_delayed_list); - spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); - queue_work(wusbd, &wa->xfer_enqueue_work); - } else { - result = wa_urb_enqueue_b(xfer); - if (result < 0) { - /* - * URB submit/enqueue failed. Clean up, return an - * error and do not run the callback. This avoids - * an infinite submit/complete loop. - */ - dev_err(dev, "%s: URB enqueue failed: %d\n", - __func__, result); - wa_put(xfer->wa); - wa_xfer_put(xfer); - spin_lock_irqsave(&wa->xfer_list_lock, my_flags); - usb_hcd_unlink_urb_from_ep(&(wa->wusb->usb_hcd), urb); - spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); - return result; - } - } - return 0; - -error_dequeued: - kfree(xfer); -error_kmalloc: - spin_lock_irqsave(&wa->xfer_list_lock, my_flags); - usb_hcd_unlink_urb_from_ep(&(wa->wusb->usb_hcd), urb); - spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); -error_link_urb: - return result; -} -EXPORT_SYMBOL_GPL(wa_urb_enqueue); - -/* - * Dequeue a URB and make sure uwb_hcd_giveback_urb() [completion - * handler] is called. - * - * Until a transfer goes successfully through wa_urb_enqueue() it - * needs to be dequeued with completion calling; when stuck in delayed - * or before wa_xfer_setup() is called, we need to do completion. - * - * not setup If there is no hcpriv yet, that means that that enqueue - * still had no time to set the xfer up. Because - * urb->status should be other than -EINPROGRESS, - * enqueue() will catch that and bail out. - * - * If the transfer has gone through setup, we just need to clean it - * up. If it has gone through submit(), we have to abort it [with an - * asynch request] and then make sure we cancel each segment. - * - */ -int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) -{ - unsigned long flags; - struct wa_xfer *xfer; - struct wa_seg *seg; - struct wa_rpipe *rpipe; - unsigned cnt, done = 0, xfer_abort_pending; - unsigned rpipe_ready = 0; - int result; - - /* check if it is safe to unlink. */ - spin_lock_irqsave(&wa->xfer_list_lock, flags); - result = usb_hcd_check_unlink_urb(&(wa->wusb->usb_hcd), urb, status); - if ((result == 0) && urb->hcpriv) { - /* - * Get a xfer ref to prevent a race with wa_xfer_giveback - * cleaning up the xfer while we are working with it. - */ - wa_xfer_get(urb->hcpriv); - } - spin_unlock_irqrestore(&wa->xfer_list_lock, flags); - if (result) - return result; - - xfer = urb->hcpriv; - if (xfer == NULL) - return -ENOENT; - spin_lock_irqsave(&xfer->lock, flags); - pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer)); - rpipe = xfer->ep->hcpriv; - if (rpipe == NULL) { - pr_debug("%s: xfer %p id 0x%08X has no RPIPE. %s", - __func__, xfer, wa_xfer_id(xfer), - "Probably already aborted.\n" ); - result = -ENOENT; - goto out_unlock; - } - /* - * Check for done to avoid racing with wa_xfer_giveback and completing - * twice. - */ - if (__wa_xfer_is_done(xfer)) { - pr_debug("%s: xfer %p id 0x%08X already done.\n", __func__, - xfer, wa_xfer_id(xfer)); - result = -ENOENT; - goto out_unlock; - } - /* Check the delayed list -> if there, release and complete */ - spin_lock(&wa->xfer_list_lock); - if (!list_empty(&xfer->list_node) && xfer->seg == NULL) - goto dequeue_delayed; - spin_unlock(&wa->xfer_list_lock); - if (xfer->seg == NULL) /* still hasn't reached */ - goto out_unlock; /* setup(), enqueue_b() completes */ - /* Ok, the xfer is in flight already, it's been setup and submitted.*/ - xfer_abort_pending = __wa_xfer_abort(xfer) >= 0; - /* - * grab the rpipe->seg_lock here to prevent racing with - * __wa_xfer_delayed_run. - */ - spin_lock(&rpipe->seg_lock); - for (cnt = 0; cnt < xfer->segs; cnt++) { - seg = xfer->seg[cnt]; - pr_debug("%s: xfer id 0x%08X#%d status = %d\n", - __func__, wa_xfer_id(xfer), cnt, seg->status); - switch (seg->status) { - case WA_SEG_NOTREADY: - case WA_SEG_READY: - printk(KERN_ERR "xfer %p#%u: dequeue bad state %u\n", - xfer, cnt, seg->status); - WARN_ON(1); - break; - case WA_SEG_DELAYED: - /* - * delete from rpipe delayed list. If no segments on - * this xfer have been submitted, __wa_xfer_is_done will - * trigger a giveback below. Otherwise, the submitted - * segments will be completed in the DTI interrupt. - */ - seg->status = WA_SEG_ABORTED; - seg->result = -ENOENT; - list_del(&seg->list_node); - xfer->segs_done++; - break; - case WA_SEG_DONE: - case WA_SEG_ERROR: - case WA_SEG_ABORTED: - break; - /* - * The buf_in data for a segment in the - * WA_SEG_DTI_PENDING state is actively being read. - * Let wa_buf_in_cb handle it since it will be called - * and will increment xfer->segs_done. Cleaning up - * here could cause wa_buf_in_cb to access the xfer - * after it has been completed/freed. - */ - case WA_SEG_DTI_PENDING: - break; - /* - * In the states below, the HWA device already knows - * about the transfer. If an abort request was sent, - * allow the HWA to process it and wait for the - * results. Otherwise, the DTI state and seg completed - * counts can get out of sync. - */ - case WA_SEG_SUBMITTED: - case WA_SEG_PENDING: - /* - * Check if the abort was successfully sent. This could - * be false if the HWA has been removed but we haven't - * gotten the disconnect notification yet. - */ - if (!xfer_abort_pending) { - seg->status = WA_SEG_ABORTED; - rpipe_ready = rpipe_avail_inc(rpipe); - xfer->segs_done++; - } - break; - } - } - spin_unlock(&rpipe->seg_lock); - xfer->result = urb->status; /* -ENOENT or -ECONNRESET */ - done = __wa_xfer_is_done(xfer); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - wa_xfer_put(xfer); - return result; - -out_unlock: - spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_put(xfer); - return result; - -dequeue_delayed: - list_del_init(&xfer->list_node); - spin_unlock(&wa->xfer_list_lock); - xfer->result = urb->status; - spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_giveback(xfer); - wa_xfer_put(xfer); - usb_put_urb(urb); /* we got a ref in enqueue() */ - return 0; -} -EXPORT_SYMBOL_GPL(wa_urb_dequeue); - -/* - * Translation from WA status codes (WUSB1.0 Table 8.15) to errno - * codes - * - * Positive errno values are internal inconsistencies and should be - * flagged louder. Negative are to be passed up to the user in the - * normal way. - * - * @status: USB WA status code -- high two bits are stripped. - */ -static int wa_xfer_status_to_errno(u8 status) -{ - int errno; - u8 real_status = status; - static int xlat[] = { - [WA_XFER_STATUS_SUCCESS] = 0, - [WA_XFER_STATUS_HALTED] = -EPIPE, - [WA_XFER_STATUS_DATA_BUFFER_ERROR] = -ENOBUFS, - [WA_XFER_STATUS_BABBLE] = -EOVERFLOW, - [WA_XFER_RESERVED] = EINVAL, - [WA_XFER_STATUS_NOT_FOUND] = 0, - [WA_XFER_STATUS_INSUFFICIENT_RESOURCE] = -ENOMEM, - [WA_XFER_STATUS_TRANSACTION_ERROR] = -EILSEQ, - [WA_XFER_STATUS_ABORTED] = -ENOENT, - [WA_XFER_STATUS_RPIPE_NOT_READY] = EINVAL, - [WA_XFER_INVALID_FORMAT] = EINVAL, - [WA_XFER_UNEXPECTED_SEGMENT_NUMBER] = EINVAL, - [WA_XFER_STATUS_RPIPE_TYPE_MISMATCH] = EINVAL, - }; - status &= 0x3f; - - if (status == 0) - return 0; - if (status >= ARRAY_SIZE(xlat)) { - printk_ratelimited(KERN_ERR "%s(): BUG? " - "Unknown WA transfer status 0x%02x\n", - __func__, real_status); - return -EINVAL; - } - errno = xlat[status]; - if (unlikely(errno > 0)) { - printk_ratelimited(KERN_ERR "%s(): BUG? " - "Inconsistent WA status: 0x%02x\n", - __func__, real_status); - errno = -errno; - } - return errno; -} - -/* - * If a last segment flag and/or a transfer result error is encountered, - * no other segment transfer results will be returned from the device. - * Mark the remaining submitted or pending xfers as completed so that - * the xfer will complete cleanly. - * - * xfer->lock must be held - * - */ -static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, - int starting_index, enum wa_seg_status status) -{ - int index; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - - for (index = starting_index; index < xfer->segs_submitted; index++) { - struct wa_seg *current_seg = xfer->seg[index]; - - BUG_ON(current_seg == NULL); - - switch (current_seg->status) { - case WA_SEG_SUBMITTED: - case WA_SEG_PENDING: - case WA_SEG_DTI_PENDING: - rpipe_avail_inc(rpipe); - /* - * do not increment RPIPE avail for the WA_SEG_DELAYED case - * since it has not been submitted to the RPIPE. - */ - /* fall through */ - case WA_SEG_DELAYED: - xfer->segs_done++; - current_seg->status = status; - break; - case WA_SEG_ABORTED: - break; - default: - WARN(1, "%s: xfer 0x%08X#%d. bad seg status = %d\n", - __func__, wa_xfer_id(xfer), index, - current_seg->status); - break; - } - } -} - -/* Populate the given urb based on the current isoc transfer state. */ -static int __wa_populate_buf_in_urb_isoc(struct wahc *wa, - struct urb *buf_in_urb, struct wa_xfer *xfer, struct wa_seg *seg) -{ - int urb_start_frame = seg->isoc_frame_index + seg->isoc_frame_offset; - int seg_index, total_len = 0, urb_frame_index = urb_start_frame; - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - const int dti_packet_size = usb_endpoint_maxp(wa->dti_epd); - int next_frame_contiguous; - struct usb_iso_packet_descriptor *iso_frame; - - BUG_ON(buf_in_urb->status == -EINPROGRESS); - - /* - * If the current frame actual_length is contiguous with the next frame - * and actual_length is a multiple of the DTI endpoint max packet size, - * combine the current frame with the next frame in a single URB. This - * reduces the number of URBs that must be submitted in that case. - */ - seg_index = seg->isoc_frame_index; - do { - next_frame_contiguous = 0; - - iso_frame = &iso_frame_desc[urb_frame_index]; - total_len += iso_frame->actual_length; - ++urb_frame_index; - ++seg_index; - - if (seg_index < seg->isoc_frame_count) { - struct usb_iso_packet_descriptor *next_iso_frame; - - next_iso_frame = &iso_frame_desc[urb_frame_index]; - - if ((iso_frame->offset + iso_frame->actual_length) == - next_iso_frame->offset) - next_frame_contiguous = 1; - } - } while (next_frame_contiguous - && ((iso_frame->actual_length % dti_packet_size) == 0)); - - /* this should always be 0 before a resubmit. */ - buf_in_urb->num_mapped_sgs = 0; - buf_in_urb->transfer_dma = xfer->urb->transfer_dma + - iso_frame_desc[urb_start_frame].offset; - buf_in_urb->transfer_buffer_length = total_len; - buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - buf_in_urb->transfer_buffer = NULL; - buf_in_urb->sg = NULL; - buf_in_urb->num_sgs = 0; - buf_in_urb->context = seg; - - /* return the number of frames included in this URB. */ - return seg_index - seg->isoc_frame_index; -} - -/* Populate the given urb based on the current transfer state. */ -static int wa_populate_buf_in_urb(struct urb *buf_in_urb, struct wa_xfer *xfer, - unsigned int seg_idx, unsigned int bytes_transferred) -{ - int result = 0; - struct wa_seg *seg = xfer->seg[seg_idx]; - - BUG_ON(buf_in_urb->status == -EINPROGRESS); - /* this should always be 0 before a resubmit. */ - buf_in_urb->num_mapped_sgs = 0; - - if (xfer->is_dma) { - buf_in_urb->transfer_dma = xfer->urb->transfer_dma - + (seg_idx * xfer->seg_size); - buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - buf_in_urb->transfer_buffer = NULL; - buf_in_urb->sg = NULL; - buf_in_urb->num_sgs = 0; - } else { - /* do buffer or SG processing. */ - buf_in_urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP; - - if (xfer->urb->transfer_buffer) { - buf_in_urb->transfer_buffer = - xfer->urb->transfer_buffer - + (seg_idx * xfer->seg_size); - buf_in_urb->sg = NULL; - buf_in_urb->num_sgs = 0; - } else { - /* allocate an SG list to store seg_size bytes - and copy the subset of the xfer->urb->sg - that matches the buffer subset we are - about to read. */ - buf_in_urb->sg = wa_xfer_create_subset_sg( - xfer->urb->sg, - seg_idx * xfer->seg_size, - bytes_transferred, - &(buf_in_urb->num_sgs)); - - if (!(buf_in_urb->sg)) { - buf_in_urb->num_sgs = 0; - result = -ENOMEM; - } - buf_in_urb->transfer_buffer = NULL; - } - } - buf_in_urb->transfer_buffer_length = bytes_transferred; - buf_in_urb->context = seg; - - return result; -} - -/* - * Process a xfer result completion message - * - * inbound transfers: need to schedule a buf_in_urb read - * - * FIXME: this function needs to be broken up in parts - */ -static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer, - struct wa_xfer_result *xfer_result) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - unsigned long flags; - unsigned int seg_idx; - struct wa_seg *seg; - struct wa_rpipe *rpipe; - unsigned done = 0; - u8 usb_status; - unsigned rpipe_ready = 0; - unsigned bytes_transferred = le32_to_cpu(xfer_result->dwTransferLength); - struct urb *buf_in_urb = &(wa->buf_in_urbs[0]); - - spin_lock_irqsave(&xfer->lock, flags); - seg_idx = xfer_result->bTransferSegment & 0x7f; - if (unlikely(seg_idx >= xfer->segs)) - goto error_bad_seg; - seg = xfer->seg[seg_idx]; - rpipe = xfer->ep->hcpriv; - usb_status = xfer_result->bTransferStatus; - dev_dbg(dev, "xfer %p ID 0x%08X#%u: bTransferStatus 0x%02x (seg status %u)\n", - xfer, wa_xfer_id(xfer), seg_idx, usb_status, seg->status); - if (seg->status == WA_SEG_ABORTED - || seg->status == WA_SEG_ERROR) /* already handled */ - goto segment_aborted; - if (seg->status == WA_SEG_SUBMITTED) /* ops, got here */ - seg->status = WA_SEG_PENDING; /* before wa_seg{_dto}_cb() */ - if (seg->status != WA_SEG_PENDING) { - if (printk_ratelimit()) - dev_err(dev, "xfer %p#%u: Bad segment state %u\n", - xfer, seg_idx, seg->status); - seg->status = WA_SEG_PENDING; /* workaround/"fix" it */ - } - if (usb_status & 0x80) { - seg->result = wa_xfer_status_to_errno(usb_status); - dev_err(dev, "DTI: xfer %p 0x%08X:#%u failed (0x%02x)\n", - xfer, xfer->id, seg->index, usb_status); - seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ? - WA_SEG_ABORTED : WA_SEG_ERROR; - goto error_complete; - } - /* FIXME: we ignore warnings, tally them for stats */ - if (usb_status & 0x40) /* Warning?... */ - usb_status = 0; /* ... pass */ - /* - * If the last segment bit is set, complete the remaining segments. - * When the current segment is completed, either in wa_buf_in_cb for - * transfers with data or below for no data, the xfer will complete. - */ - if (xfer_result->bTransferSegment & 0x80) - wa_complete_remaining_xfer_segs(xfer, seg->index + 1, - WA_SEG_DONE); - if (usb_pipeisoc(xfer->urb->pipe) - && (le32_to_cpu(xfer_result->dwNumOfPackets) > 0)) { - /* set up WA state to read the isoc packet status next. */ - wa->dti_isoc_xfer_in_progress = wa_xfer_id(xfer); - wa->dti_isoc_xfer_seg = seg_idx; - wa->dti_state = WA_DTI_ISOC_PACKET_STATUS_PENDING; - } else if (xfer->is_inbound && !usb_pipeisoc(xfer->urb->pipe) - && (bytes_transferred > 0)) { - /* IN data phase: read to buffer */ - seg->status = WA_SEG_DTI_PENDING; - result = wa_populate_buf_in_urb(buf_in_urb, xfer, seg_idx, - bytes_transferred); - if (result < 0) - goto error_buf_in_populate; - ++(wa->active_buf_in_urbs); - result = usb_submit_urb(buf_in_urb, GFP_ATOMIC); - if (result < 0) { - --(wa->active_buf_in_urbs); - goto error_submit_buf_in; - } - } else { - /* OUT data phase or no data, complete it -- */ - seg->result = bytes_transferred; - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - return; - -error_submit_buf_in: - if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "DTI: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - } - if (printk_ratelimit()) - dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n", - xfer, seg_idx, result); - seg->result = result; - kfree(buf_in_urb->sg); - buf_in_urb->sg = NULL; -error_buf_in_populate: - __wa_xfer_abort(xfer); - seg->status = WA_SEG_ERROR; -error_complete: - xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); - wa_complete_remaining_xfer_segs(xfer, seg->index + 1, seg->status); - done = __wa_xfer_is_done(xfer); - /* - * queue work item to clear STALL for control endpoints. - * Otherwise, let endpoint_reset take care of it. - */ - if (((usb_status & 0x3f) == WA_XFER_STATUS_HALTED) && - usb_endpoint_xfer_control(&xfer->ep->desc) && - done) { - - dev_info(dev, "Control EP stall. Queue delayed work.\n"); - spin_lock(&wa->xfer_list_lock); - /* move xfer from xfer_list to xfer_errored_list. */ - list_move_tail(&xfer->list_node, &wa->xfer_errored_list); - spin_unlock(&wa->xfer_list_lock); - spin_unlock_irqrestore(&xfer->lock, flags); - queue_work(wusbd, &wa->xfer_error_work); - } else { - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - } - - return; - -error_bad_seg: - spin_unlock_irqrestore(&xfer->lock, flags); - wa_urb_dequeue(wa, xfer->urb, -ENOENT); - if (printk_ratelimit()) - dev_err(dev, "xfer %p#%u: bad segment\n", xfer, seg_idx); - if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "DTI: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - } - return; - -segment_aborted: - /* nothing to do, as the aborter did the completion */ - spin_unlock_irqrestore(&xfer->lock, flags); -} - -/* - * Process a isochronous packet status message - * - * inbound transfers: need to schedule a buf_in_urb read - */ -static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb) -{ - struct device *dev = &wa->usb_iface->dev; - struct wa_xfer_packet_status_hwaiso *packet_status; - struct wa_xfer_packet_status_len_hwaiso *status_array; - struct wa_xfer *xfer; - unsigned long flags; - struct wa_seg *seg; - struct wa_rpipe *rpipe; - unsigned done = 0, dti_busy = 0, data_frame_count = 0, seg_index; - unsigned first_frame_index = 0, rpipe_ready = 0; - size_t expected_size; - - /* We have a xfer result buffer; check it */ - dev_dbg(dev, "DTI: isoc packet status %d bytes at %p\n", - urb->actual_length, urb->transfer_buffer); - packet_status = (struct wa_xfer_packet_status_hwaiso *)(wa->dti_buf); - if (packet_status->bPacketType != WA_XFER_ISO_PACKET_STATUS) { - dev_err(dev, "DTI Error: isoc packet status--bad type 0x%02x\n", - packet_status->bPacketType); - goto error_parse_buffer; - } - xfer = wa_xfer_get_by_id(wa, wa->dti_isoc_xfer_in_progress); - if (xfer == NULL) { - dev_err(dev, "DTI Error: isoc packet status--unknown xfer 0x%08x\n", - wa->dti_isoc_xfer_in_progress); - goto error_parse_buffer; - } - spin_lock_irqsave(&xfer->lock, flags); - if (unlikely(wa->dti_isoc_xfer_seg >= xfer->segs)) - goto error_bad_seg; - seg = xfer->seg[wa->dti_isoc_xfer_seg]; - rpipe = xfer->ep->hcpriv; - expected_size = struct_size(packet_status, PacketStatus, - seg->isoc_frame_count); - if (urb->actual_length != expected_size) { - dev_err(dev, "DTI Error: isoc packet status--bad urb length (%d bytes vs %zu needed)\n", - urb->actual_length, expected_size); - goto error_bad_seg; - } - if (le16_to_cpu(packet_status->wLength) != expected_size) { - dev_err(dev, "DTI Error: isoc packet status--bad length %u\n", - le16_to_cpu(packet_status->wLength)); - goto error_bad_seg; - } - /* write isoc packet status and lengths back to the xfer urb. */ - status_array = packet_status->PacketStatus; - xfer->urb->start_frame = - wa->wusb->usb_hcd.driver->get_frame_number(&wa->wusb->usb_hcd); - for (seg_index = 0; seg_index < seg->isoc_frame_count; ++seg_index) { - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - const int xfer_frame_index = - seg->isoc_frame_offset + seg_index; - - iso_frame_desc[xfer_frame_index].status = - wa_xfer_status_to_errno( - le16_to_cpu(status_array[seg_index].PacketStatus)); - iso_frame_desc[xfer_frame_index].actual_length = - le16_to_cpu(status_array[seg_index].PacketLength); - /* track the number of frames successfully transferred. */ - if (iso_frame_desc[xfer_frame_index].actual_length > 0) { - /* save the starting frame index for buf_in_urb. */ - if (!data_frame_count) - first_frame_index = seg_index; - ++data_frame_count; - } - } - - if (xfer->is_inbound && data_frame_count) { - int result, total_frames_read = 0, urb_index = 0; - struct urb *buf_in_urb; - - /* IN data phase: read to buffer */ - seg->status = WA_SEG_DTI_PENDING; - - /* start with the first frame with data. */ - seg->isoc_frame_index = first_frame_index; - /* submit up to WA_MAX_BUF_IN_URBS read URBs. */ - do { - int urb_frame_index, urb_frame_count; - struct usb_iso_packet_descriptor *iso_frame_desc; - - buf_in_urb = &(wa->buf_in_urbs[urb_index]); - urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, - buf_in_urb, xfer, seg); - /* advance frame index to start of next read URB. */ - seg->isoc_frame_index += urb_frame_count; - total_frames_read += urb_frame_count; - - ++(wa->active_buf_in_urbs); - result = usb_submit_urb(buf_in_urb, GFP_ATOMIC); - - /* skip 0-byte frames. */ - urb_frame_index = - seg->isoc_frame_offset + seg->isoc_frame_index; - iso_frame_desc = - &(xfer->urb->iso_frame_desc[urb_frame_index]); - while ((seg->isoc_frame_index < - seg->isoc_frame_count) && - (iso_frame_desc->actual_length == 0)) { - ++(seg->isoc_frame_index); - ++iso_frame_desc; - } - ++urb_index; - - } while ((result == 0) && (urb_index < WA_MAX_BUF_IN_URBS) - && (seg->isoc_frame_index < - seg->isoc_frame_count)); - - if (result < 0) { - --(wa->active_buf_in_urbs); - dev_err(dev, "DTI Error: Could not submit buf in URB (%d)", - result); - wa_reset_all(wa); - } else if (data_frame_count > total_frames_read) - /* If we need to read more frames, set DTI busy. */ - dti_busy = 1; - } else { - /* OUT transfer or no more IN data, complete it -- */ - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (dti_busy) - wa->dti_state = WA_DTI_BUF_IN_DATA_PENDING; - else - wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - wa_xfer_put(xfer); - return dti_busy; - -error_bad_seg: - spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_put(xfer); -error_parse_buffer: - return dti_busy; -} - -/* - * Callback for the IN data phase - * - * If successful transition state; otherwise, take a note of the - * error, mark this segment done and try completion. - * - * Note we don't access until we are sure that the transfer hasn't - * been cancelled (ECONNRESET, ENOENT), which could mean that - * seg->xfer could be already gone. - */ -static void wa_buf_in_cb(struct urb *urb) -{ - struct wa_seg *seg = urb->context; - struct wa_xfer *xfer = seg->xfer; - struct wahc *wa; - struct device *dev; - struct wa_rpipe *rpipe; - unsigned rpipe_ready = 0, isoc_data_frame_count = 0; - unsigned long flags; - int resubmit_dti = 0, active_buf_in_urbs; - u8 done = 0; - - /* free the sg if it was used. */ - kfree(urb->sg); - urb->sg = NULL; - - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - --(wa->active_buf_in_urbs); - active_buf_in_urbs = wa->active_buf_in_urbs; - rpipe = xfer->ep->hcpriv; - - if (usb_pipeisoc(xfer->urb->pipe)) { - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - int seg_index; - - /* - * Find the next isoc frame with data and count how many - * frames with data remain. - */ - seg_index = seg->isoc_frame_index; - while (seg_index < seg->isoc_frame_count) { - const int urb_frame_index = - seg->isoc_frame_offset + seg_index; - - if (iso_frame_desc[urb_frame_index].actual_length > 0) { - /* save the index of the next frame with data */ - if (!isoc_data_frame_count) - seg->isoc_frame_index = seg_index; - ++isoc_data_frame_count; - } - ++seg_index; - } - } - spin_unlock_irqrestore(&xfer->lock, flags); - - switch (urb->status) { - case 0: - spin_lock_irqsave(&xfer->lock, flags); - - seg->result += urb->actual_length; - if (isoc_data_frame_count > 0) { - int result, urb_frame_count; - - /* submit a read URB for the next frame with data. */ - urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, urb, - xfer, seg); - /* advance index to start of next read URB. */ - seg->isoc_frame_index += urb_frame_count; - ++(wa->active_buf_in_urbs); - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result < 0) { - --(wa->active_buf_in_urbs); - dev_err(dev, "DTI Error: Could not submit buf in URB (%d)", - result); - wa_reset_all(wa); - } - /* - * If we are in this callback and - * isoc_data_frame_count > 0, it means that the dti_urb - * submission was delayed in wa_dti_cb. Once - * we submit the last buf_in_urb, we can submit the - * delayed dti_urb. - */ - resubmit_dti = (isoc_data_frame_count == - urb_frame_count); - } else if (active_buf_in_urbs == 0) { - dev_dbg(dev, - "xfer %p 0x%08X#%u: data in done (%zu bytes)\n", - xfer, wa_xfer_id(xfer), seg->index, - seg->result); - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, - WA_SEG_DONE); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - break; - case -ECONNRESET: /* URB unlinked; no need to do anything */ - case -ENOENT: /* as it was done by the who unlinked us */ - break; - default: /* Other errors ... */ - /* - * Error on data buf read. Only resubmit DTI if it hasn't - * already been done by previously hitting this error or by a - * successful completion of the previous buf_in_urb. - */ - resubmit_dti = wa->dti_state != WA_DTI_TRANSFER_RESULT_PENDING; - spin_lock_irqsave(&xfer->lock, flags); - if (printk_ratelimit()) - dev_err(dev, "xfer %p 0x%08X#%u: data in error %d\n", - xfer, wa_xfer_id(xfer), seg->index, - urb->status); - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "DTO: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - } - seg->result = urb->status; - rpipe_ready = rpipe_avail_inc(rpipe); - if (active_buf_in_urbs == 0) - done = __wa_xfer_mark_seg_as_done(xfer, seg, - WA_SEG_ERROR); - else - __wa_xfer_abort(xfer); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - } - - if (resubmit_dti) { - int result; - - wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; - - result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n", - result); - wa_reset_all(wa); - } - } -} - -/* - * Handle an incoming transfer result buffer - * - * Given a transfer result buffer, it completes the transfer (possibly - * scheduling and buffer in read) and then resubmits the DTI URB for a - * new transfer result read. - * - * - * The xfer_result DTI URB state machine - * - * States: OFF | RXR (Read-Xfer-Result) | RBI (Read-Buffer-In) - * - * We start in OFF mode, the first xfer_result notification [through - * wa_handle_notif_xfer()] moves us to RXR by posting the DTI-URB to - * read. - * - * We receive a buffer -- if it is not a xfer_result, we complain and - * repost the DTI-URB. If it is a xfer_result then do the xfer seg - * request accounting. If it is an IN segment, we move to RBI and post - * a BUF-IN-URB to the right buffer. The BUF-IN-URB callback will - * repost the DTI-URB and move to RXR state. if there was no IN - * segment, it will repost the DTI-URB. - * - * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many - * errors) in the URBs. - */ -static void wa_dti_cb(struct urb *urb) -{ - int result, dti_busy = 0; - struct wahc *wa = urb->context; - struct device *dev = &wa->usb_iface->dev; - u32 xfer_id; - u8 usb_status; - - BUG_ON(wa->dti_urb != urb); - switch (wa->dti_urb->status) { - case 0: - if (wa->dti_state == WA_DTI_TRANSFER_RESULT_PENDING) { - struct wa_xfer_result *xfer_result; - struct wa_xfer *xfer; - - /* We have a xfer result buffer; check it */ - dev_dbg(dev, "DTI: xfer result %d bytes at %p\n", - urb->actual_length, urb->transfer_buffer); - if (urb->actual_length != sizeof(*xfer_result)) { - dev_err(dev, "DTI Error: xfer result--bad size xfer result (%d bytes vs %zu needed)\n", - urb->actual_length, - sizeof(*xfer_result)); - break; - } - xfer_result = (struct wa_xfer_result *)(wa->dti_buf); - if (xfer_result->hdr.bLength != sizeof(*xfer_result)) { - dev_err(dev, "DTI Error: xfer result--bad header length %u\n", - xfer_result->hdr.bLength); - break; - } - if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) { - dev_err(dev, "DTI Error: xfer result--bad header type 0x%02x\n", - xfer_result->hdr.bNotifyType); - break; - } - xfer_id = le32_to_cpu(xfer_result->dwTransferID); - usb_status = xfer_result->bTransferStatus & 0x3f; - if (usb_status == WA_XFER_STATUS_NOT_FOUND) { - /* taken care of already */ - dev_dbg(dev, "%s: xfer 0x%08X#%u not found.\n", - __func__, xfer_id, - xfer_result->bTransferSegment & 0x7f); - break; - } - xfer = wa_xfer_get_by_id(wa, xfer_id); - if (xfer == NULL) { - /* FIXME: transaction not found. */ - dev_err(dev, "DTI Error: xfer result--unknown xfer 0x%08x (status 0x%02x)\n", - xfer_id, usb_status); - break; - } - wa_xfer_result_chew(wa, xfer, xfer_result); - wa_xfer_put(xfer); - } else if (wa->dti_state == WA_DTI_ISOC_PACKET_STATUS_PENDING) { - dti_busy = wa_process_iso_packet_status(wa, urb); - } else { - dev_err(dev, "DTI Error: unexpected EP state = %d\n", - wa->dti_state); - } - break; - case -ENOENT: /* (we killed the URB)...so, no broadcast */ - case -ESHUTDOWN: /* going away! */ - dev_dbg(dev, "DTI: going down! %d\n", urb->status); - goto out; - default: - /* Unknown error */ - if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "DTI: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - goto out; - } - if (printk_ratelimit()) - dev_err(dev, "DTI: URB error %d\n", urb->status); - break; - } - - /* Resubmit the DTI URB if we are not busy processing isoc in frames. */ - if (!dti_busy) { - result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n", - result); - wa_reset_all(wa); - } - } -out: - return; -} - -/* - * Initialize the DTI URB for reading transfer result notifications and also - * the buffer-in URB, for reading buffers. Then we just submit the DTI URB. - */ -int wa_dti_start(struct wahc *wa) -{ - const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; - struct device *dev = &wa->usb_iface->dev; - int result = -ENOMEM, index; - - if (wa->dti_urb != NULL) /* DTI URB already started */ - goto out; - - wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL); - if (wa->dti_urb == NULL) - goto error_dti_urb_alloc; - usb_fill_bulk_urb( - wa->dti_urb, wa->usb_dev, - usb_rcvbulkpipe(wa->usb_dev, 0x80 | dti_epd->bEndpointAddress), - wa->dti_buf, wa->dti_buf_size, - wa_dti_cb, wa); - - /* init the buf in URBs */ - for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) { - usb_fill_bulk_urb( - &(wa->buf_in_urbs[index]), wa->usb_dev, - usb_rcvbulkpipe(wa->usb_dev, - 0x80 | dti_epd->bEndpointAddress), - NULL, 0, wa_buf_in_cb, wa); - } - result = usb_submit_urb(wa->dti_urb, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "DTI Error: Could not submit DTI URB (%d) resetting\n", - result); - goto error_dti_urb_submit; - } -out: - return 0; - -error_dti_urb_submit: - usb_put_urb(wa->dti_urb); - wa->dti_urb = NULL; -error_dti_urb_alloc: - return result; -} -EXPORT_SYMBOL_GPL(wa_dti_start); -/* - * Transfer complete notification - * - * Called from the notif.c code. We get a notification on EP2 saying - * that some endpoint has some transfer result data available. We are - * about to read it. - * - * To speed up things, we always have a URB reading the DTI URB; we - * don't really set it up and start it until the first xfer complete - * notification arrives, which is what we do here. - * - * Follow up in wa_dti_cb(), as that's where the whole state - * machine starts. - * - * @wa shall be referenced - */ -void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr) -{ - struct device *dev = &wa->usb_iface->dev; - struct wa_notif_xfer *notif_xfer; - const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; - - notif_xfer = container_of(notif_hdr, struct wa_notif_xfer, hdr); - BUG_ON(notif_hdr->bNotifyType != WA_NOTIF_TRANSFER); - - if ((0x80 | notif_xfer->bEndpoint) != dti_epd->bEndpointAddress) { - /* FIXME: hardcoded limitation, adapt */ - dev_err(dev, "BUG: DTI ep is %u, not %u (hack me)\n", - notif_xfer->bEndpoint, dti_epd->bEndpointAddress); - goto error; - } - - /* attempt to start the DTI ep processing. */ - if (wa_dti_start(wa) < 0) - goto error; - - return; - -error: - wa_reset_all(wa); -} diff --git a/drivers/staging/wusbcore/wusbhc.c b/drivers/staging/wusbcore/wusbhc.c deleted file mode 100644 index d0b404d258e8..000000000000 --- a/drivers/staging/wusbcore/wusbhc.c +++ /dev/null @@ -1,490 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * sysfs glue, wusbcore module support and life cycle management - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Creation/destruction of wusbhc is split in two parts; that that - * doesn't require the HCD to be added (wusbhc_{create,destroy}) and - * the one that requires (phase B, wusbhc_b_{create,destroy}). - * - * This is so because usb_add_hcd() will start the HC, and thus, all - * the HC specific stuff has to be already initialized (like sysfs - * thingies). - */ -#include <linux/device.h> -#include <linux/module.h> -#include "wusbhc.h" - -/** - * Extract the wusbhc that corresponds to a USB Host Controller class device - * - * WARNING! Apply only if @dev is that of a - * wusbhc.usb_hcd.self->class_dev; otherwise, you loose. - */ -static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev) -{ - struct usb_bus *usb_bus = dev_get_drvdata(dev); - struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus); - return usb_hcd_to_wusbhc(usb_hcd); -} - -/* - * Show & store the current WUSB trust timeout - * - * We don't do locking--it is an 'atomic' value. - * - * The units that we store/show are always MILLISECONDS. However, the - * value of trust_timeout is jiffies. - */ -static ssize_t wusb_trust_timeout_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout); -} - -static ssize_t wusb_trust_timeout_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - ssize_t result = -ENOSYS; - unsigned trust_timeout; - - result = sscanf(buf, "%u", &trust_timeout); - if (result != 1) { - result = -EINVAL; - goto out; - } - wusbhc->trust_timeout = min_t(unsigned, trust_timeout, 500); - cancel_delayed_work(&wusbhc->keep_alive_timer); - flush_workqueue(wusbd); - queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, - msecs_to_jiffies(wusbhc->trust_timeout / 2)); -out: - return result < 0 ? result : size; -} -static DEVICE_ATTR_RW(wusb_trust_timeout); - -/* - * Show the current WUSB CHID. - */ -static ssize_t wusb_chid_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - const struct wusb_ckhdid *chid; - - if (wusbhc->wuie_host_info != NULL) - chid = &wusbhc->wuie_host_info->CHID; - else - chid = &wusb_ckhdid_zero; - - return sprintf(buf, "%16ph\n", chid->data); -} - -/* - * Store a new CHID. - * - * - Write an all zeros CHID and it will stop the controller - * - Write a non-zero CHID and it will start it. - * - * See wusbhc_chid_set() for more info. - */ -static ssize_t wusb_chid_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - struct wusb_ckhdid chid; - ssize_t result; - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx\n", - &chid.data[0] , &chid.data[1] , - &chid.data[2] , &chid.data[3] , - &chid.data[4] , &chid.data[5] , - &chid.data[6] , &chid.data[7] , - &chid.data[8] , &chid.data[9] , - &chid.data[10], &chid.data[11], - &chid.data[12], &chid.data[13], - &chid.data[14], &chid.data[15]); - if (result != 16) { - dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): " - "%d\n", (int)result); - return -EINVAL; - } - result = wusbhc_chid_set(wusbhc, &chid); - return result < 0 ? result : size; -} -static DEVICE_ATTR_RW(wusb_chid); - - -static ssize_t wusb_phy_rate_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return sprintf(buf, "%d\n", wusbhc->phy_rate); -} - -static ssize_t wusb_phy_rate_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - uint8_t phy_rate; - ssize_t result; - - result = sscanf(buf, "%hhu", &phy_rate); - if (result != 1) - return -EINVAL; - if (phy_rate >= UWB_PHY_RATE_INVALID) - return -EINVAL; - - wusbhc->phy_rate = phy_rate; - return size; -} -static DEVICE_ATTR_RW(wusb_phy_rate); - -static ssize_t wusb_dnts_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return sprintf(buf, "num slots: %d\ninterval: %dms\n", - wusbhc->dnts_num_slots, wusbhc->dnts_interval); -} - -static ssize_t wusb_dnts_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - uint8_t num_slots, interval; - ssize_t result; - - result = sscanf(buf, "%hhu %hhu", &num_slots, &interval); - - if (result != 2) - return -EINVAL; - - wusbhc->dnts_num_slots = num_slots; - wusbhc->dnts_interval = interval; - - return size; -} -static DEVICE_ATTR_RW(wusb_dnts); - -static ssize_t wusb_retry_count_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return sprintf(buf, "%d\n", wusbhc->retry_count); -} - -static ssize_t wusb_retry_count_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - uint8_t retry_count; - ssize_t result; - - result = sscanf(buf, "%hhu", &retry_count); - - if (result != 1) - return -EINVAL; - - wusbhc->retry_count = max_t(uint8_t, retry_count, - WUSB_RETRY_COUNT_MAX); - - return size; -} -static DEVICE_ATTR_RW(wusb_retry_count); - -/* Group all the WUSBHC attributes */ -static struct attribute *wusbhc_attrs[] = { - &dev_attr_wusb_trust_timeout.attr, - &dev_attr_wusb_chid.attr, - &dev_attr_wusb_phy_rate.attr, - &dev_attr_wusb_dnts.attr, - &dev_attr_wusb_retry_count.attr, - NULL, -}; - -static const struct attribute_group wusbhc_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = wusbhc_attrs, -}; - -/* - * Create a wusbhc instance - * - * NOTEs: - * - * - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been - * initialized but not added. - * - * - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling. - * - * - fill out wusbhc->uwb_rc and refcount it before calling - * - fill out the wusbhc->sec_modes array - */ -int wusbhc_create(struct wusbhc *wusbhc) -{ - int result = 0; - - /* set defaults. These can be overwritten using sysfs attributes. */ - wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS; - wusbhc->phy_rate = UWB_PHY_RATE_INVALID - 1; - wusbhc->dnts_num_slots = 4; - wusbhc->dnts_interval = 2; - wusbhc->retry_count = WUSB_RETRY_COUNT_INFINITE; - - mutex_init(&wusbhc->mutex); - result = wusbhc_mmcie_create(wusbhc); - if (result < 0) - goto error_mmcie_create; - result = wusbhc_devconnect_create(wusbhc); - if (result < 0) - goto error_devconnect_create; - result = wusbhc_rh_create(wusbhc); - if (result < 0) - goto error_rh_create; - result = wusbhc_sec_create(wusbhc); - if (result < 0) - goto error_sec_create; - return 0; - -error_sec_create: - wusbhc_rh_destroy(wusbhc); -error_rh_create: - wusbhc_devconnect_destroy(wusbhc); -error_devconnect_create: - wusbhc_mmcie_destroy(wusbhc); -error_mmcie_create: - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_create); - -static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc) -{ - return &wusbhc->usb_hcd.self.controller->kobj; -} - -/* - * Phase B of a wusbhc instance creation - * - * Creates fields that depend on wusbhc->usb_hcd having been - * added. This is where we create the sysfs files in - * /sys/class/usb_host/usb_hostX/. - * - * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper - * layer (hwahc or whci) - */ -int wusbhc_b_create(struct wusbhc *wusbhc) -{ - int result = 0; - struct device *dev = wusbhc->usb_hcd.self.controller; - - result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); - if (result < 0) { - dev_err(dev, "Cannot register WUSBHC attributes: %d\n", - result); - goto error_create_attr_group; - } - - return 0; -error_create_attr_group: - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_b_create); - -void wusbhc_b_destroy(struct wusbhc *wusbhc) -{ - wusbhc_pal_unregister(wusbhc); - sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); -} -EXPORT_SYMBOL_GPL(wusbhc_b_destroy); - -void wusbhc_destroy(struct wusbhc *wusbhc) -{ - wusbhc_sec_destroy(wusbhc); - wusbhc_rh_destroy(wusbhc); - wusbhc_devconnect_destroy(wusbhc); - wusbhc_mmcie_destroy(wusbhc); -} -EXPORT_SYMBOL_GPL(wusbhc_destroy); - -struct workqueue_struct *wusbd; -EXPORT_SYMBOL_GPL(wusbd); - -/* - * WUSB Cluster ID allocation map - * - * Each WUSB bus in a channel is identified with a Cluster Id in the - * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff - * (that's space for 31 WUSB controllers, as 0xff can't be taken). We - * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff). - * - * For each one we taken, we pin it in the bitap - */ -#define CLUSTER_IDS 32 -static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS); -static DEFINE_SPINLOCK(wusb_cluster_ids_lock); - -/* - * Get a WUSB Cluster ID - * - * Need to release with wusb_cluster_id_put() when done w/ it. - */ -/* FIXME: coordinate with the choose_addres() from the USB stack */ -/* we want to leave the top of the 128 range for cluster addresses and - * the bottom for device addresses (as we map them one on one with - * ports). */ -u8 wusb_cluster_id_get(void) -{ - u8 id; - spin_lock(&wusb_cluster_ids_lock); - id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS); - if (id >= CLUSTER_IDS) { - id = 0; - goto out; - } - set_bit(id, wusb_cluster_id_table); - id = (u8) 0xff - id; -out: - spin_unlock(&wusb_cluster_ids_lock); - return id; - -} -EXPORT_SYMBOL_GPL(wusb_cluster_id_get); - -/* - * Release a WUSB Cluster ID - * - * Obtained it with wusb_cluster_id_get() - */ -void wusb_cluster_id_put(u8 id) -{ - id = 0xff - id; - BUG_ON(id >= CLUSTER_IDS); - spin_lock(&wusb_cluster_ids_lock); - WARN_ON(!test_bit(id, wusb_cluster_id_table)); - clear_bit(id, wusb_cluster_id_table); - spin_unlock(&wusb_cluster_ids_lock); -} -EXPORT_SYMBOL_GPL(wusb_cluster_id_put); - -/** - * wusbhc_giveback_urb - return an URB to the USB core - * @wusbhc: the host controller the URB is from. - * @urb: the URB. - * @status: the URB's status. - * - * Return an URB to the USB core doing some additional WUSB specific - * processing. - * - * - After a successful transfer, update the trust timeout timestamp - * for the WUSB device. - * - * - [WUSB] sections 4.13 and 7.5.1 specify the stop retransmission - * condition for the WCONNECTACK_IE is that the host has observed - * the associated device responding to a control transfer. - */ -void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) -{ - struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, - urb->dev); - - if (status == 0 && wusb_dev) { - wusb_dev->entry_ts = jiffies; - - /* wusbhc_devconnect_acked() can't be called from - atomic context so defer it to a work queue. */ - if (!list_empty(&wusb_dev->cack_node)) - queue_work(wusbd, &wusb_dev->devconnect_acked_work); - else - wusb_dev_put(wusb_dev); - } - - usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); -} -EXPORT_SYMBOL_GPL(wusbhc_giveback_urb); - -/** - * wusbhc_reset_all - reset the HC hardware - * @wusbhc: the host controller to reset. - * - * Request a full hardware reset of the chip. This will also reset - * the radio controller and any other PALs. - */ -void wusbhc_reset_all(struct wusbhc *wusbhc) -{ - if (wusbhc->uwb_rc) - uwb_rc_reset_all(wusbhc->uwb_rc); -} -EXPORT_SYMBOL_GPL(wusbhc_reset_all); - -static struct notifier_block wusb_usb_notifier = { - .notifier_call = wusb_usb_ncb, - .priority = INT_MAX /* Need to be called first of all */ -}; - -static int __init wusbcore_init(void) -{ - int result; - result = wusb_crypto_init(); - if (result < 0) - goto error_crypto_init; - /* WQ is singlethread because we need to serialize notifications */ - wusbd = create_singlethread_workqueue("wusbd"); - if (wusbd == NULL) { - result = -ENOMEM; - printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n"); - goto error_wusbd_create; - } - usb_register_notify(&wusb_usb_notifier); - bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS); - set_bit(0, wusb_cluster_id_table); /* reserve Cluster ID 0xff */ - return 0; - -error_wusbd_create: - wusb_crypto_exit(); -error_crypto_init: - return result; - -} -module_init(wusbcore_init); - -static void __exit wusbcore_exit(void) -{ - clear_bit(0, wusb_cluster_id_table); - if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) { - printk(KERN_ERR "BUG: WUSB Cluster IDs not released on exit: %*pb\n", - CLUSTER_IDS, wusb_cluster_id_table); - WARN_ON(1); - } - usb_unregister_notify(&wusb_usb_notifier); - destroy_workqueue(wusbd); - wusb_crypto_exit(); -} -module_exit(wusbcore_exit); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Wireless USB core"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/wusbcore/wusbhc.h b/drivers/staging/wusbcore/wusbhc.h deleted file mode 100644 index 716244a2ec44..000000000000 --- a/drivers/staging/wusbcore/wusbhc.h +++ /dev/null @@ -1,487 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * Common infrastructure for WHCI and HWA WUSB-HC drivers - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This driver implements parts common to all Wireless USB Host - * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used - * by: - * - * - hwahc: HWA, USB-dongle that implements a Wireless USB host - * controller, (Wireless USB 1.0 Host-Wire-Adapter specification). - * - * - whci: WHCI, a PCI card with a wireless host controller - * (Wireless Host Controller Interface 1.0 specification). - * - * Check out the Design-overview.txt file in the source documentation - * for other details on the implementation. - * - * Main blocks: - * - * rh Root Hub emulation (part of the HCD glue) - * - * devconnect Handle all the issues related to device connection, - * authentication, disconnection, timeout, reseting, - * keepalives, etc. - * - * mmc MMC IE broadcasting handling - * - * A host controller driver just initializes its stuff and as part of - * that, creates a 'struct wusbhc' instance that handles all the - * common WUSB mechanisms. Links in the function ops that are specific - * to it and then registers the host controller. Ready to run. - */ - -#ifndef __WUSBHC_H__ -#define __WUSBHC_H__ - -#include <linux/usb.h> -#include <linux/list.h> -#include <linux/mutex.h> -#include <linux/kref.h> -#include <linux/workqueue.h> -#include <linux/usb/hcd.h> -#include "../uwb/uwb.h" -#include "include/wusb.h" - -/* - * Time from a WUSB channel stop request to the last transmitted MMC. - * - * This needs to be > 4.096 ms in case no MMCs can be transmitted in - * zone 0. - */ -#define WUSB_CHANNEL_STOP_DELAY_MS 8 -#define WUSB_RETRY_COUNT_MAX 15 -#define WUSB_RETRY_COUNT_INFINITE 0 - -/** - * Wireless USB device - * - * Describe a WUSB device connected to the cluster. This struct - * belongs to the 'struct wusb_port' it is attached to and it is - * responsible for putting and clearing the pointer to it. - * - * Note this "complements" the 'struct usb_device' that the usb_hcd - * keeps for each connected USB device. However, it extends some - * information that is not available (there is no hcpriv ptr in it!) - * *and* most importantly, it's life cycle is different. It is created - * as soon as we get a DN_Connect (connect request notification) from - * the device through the WUSB host controller; the USB stack doesn't - * create the device until we authenticate it. FIXME: this will - * change. - * - * @bos: This is allocated when the BOS descriptors are read from - * the device and freed upon the wusb_dev struct dying. - * @wusb_cap_descr: points into @bos, and has been verified to be size - * safe. - */ -struct wusb_dev { - struct kref refcnt; - struct wusbhc *wusbhc; - struct list_head cack_node; /* Connect-Ack list */ - struct list_head rekey_node; /* GTK rekey list */ - u8 port_idx; - u8 addr; - u8 beacon_type:4; - struct usb_encryption_descriptor ccm1_etd; - struct wusb_ckhdid cdid; - unsigned long entry_ts; - struct usb_bos_descriptor *bos; - struct usb_wireless_cap_descriptor *wusb_cap_descr; - struct uwb_mas_bm availability; - struct work_struct devconnect_acked_work; - struct usb_device *usb_dev; -}; - -#define WUSB_DEV_ADDR_UNAUTH 0x80 - -static inline void wusb_dev_init(struct wusb_dev *wusb_dev) -{ - kref_init(&wusb_dev->refcnt); - /* no need to init the cack_node */ -} - -extern void wusb_dev_destroy(struct kref *_wusb_dev); - -static inline struct wusb_dev *wusb_dev_get(struct wusb_dev *wusb_dev) -{ - kref_get(&wusb_dev->refcnt); - return wusb_dev; -} - -static inline void wusb_dev_put(struct wusb_dev *wusb_dev) -{ - kref_put(&wusb_dev->refcnt, wusb_dev_destroy); -} - -/** - * Wireless USB Host Controller root hub "fake" ports - * (state and device information) - * - * Wireless USB is wireless, so there are no ports; but we - * fake'em. Each RC can connect a max of devices at the same time - * (given in the Wireless Adapter descriptor, bNumPorts or WHCI's - * caps), referred to in wusbhc->ports_max. - * - * See rh.c for more information. - * - * The @status and @change use the same bits as in USB2.0[11.24.2.7], - * so we don't have to do much when getting the port's status. - * - * WUSB1.0[7.1], USB2.0[11.24.2.7.1,fig 11-10], - * include/linux/usb_ch9.h (#define USB_PORT_STAT_*) - */ -struct wusb_port { - u16 status; - u16 change; - struct wusb_dev *wusb_dev; /* connected device's info */ - u32 ptk_tkid; -}; - -/** - * WUSB Host Controller specifics - * - * All fields that are common to all Wireless USB controller types - * (HWA and WHCI) are grouped here. Host Controller - * functions/operations that only deal with general Wireless USB HC - * issues use this data type to refer to the host. - * - * @usb_hcd Instantiation of a USB host controller - * (initialized by upper layer [HWA=HC or WHCI]. - * - * @dev Device that implements this; initialized by the - * upper layer (HWA-HC, WHCI...); this device should - * have a refcount. - * - * @trust_timeout After this time without hearing for device - * activity, we consider the device gone and we have to - * re-authenticate. - * - * Can be accessed w/o locking--however, read to a - * local variable then use. - * - * @chid WUSB Cluster Host ID: this is supposed to be a - * unique value that doesn't change across reboots (so - * that your devices do not require re-association). - * - * Read/Write protected by @mutex - * - * @dev_info This array has ports_max elements. It is used to - * give the HC information about the WUSB devices (see - * 'struct wusb_dev_info'). - * - * For HWA we need to allocate it in heap; for WHCI it - * needs to be permanently mapped, so we keep it for - * both and make it easy. Call wusbhc->dev_info_set() - * to update an entry. - * - * @ports_max Number of simultaneous device connections (fake - * ports) this HC will take. Read-only. - * - * @port Array of port status for each fake root port. Guaranteed to - * always be the same length during device existence - * [this allows for some unlocked but referenced reading]. - * - * @mmcies_max Max number of Information Elements this HC can send - * in its MMC. Read-only. - * - * @start Start the WUSB channel. - * - * @stop Stop the WUSB channel after the specified number of - * milliseconds. Channel Stop IEs should be transmitted - * as required by [WUSB] 4.16.2.1. - * - * @mmcie_add HC specific operation (WHCI or HWA) for adding an - * MMCIE. - * - * @mmcie_rm HC specific operation (WHCI or HWA) for removing an - * MMCIE. - * - * @set_ptk: Set the PTK and enable encryption for a device. Or, if - * the supplied key is NULL, disable encryption for that - * device. - * - * @set_gtk: Set the GTK to be used for all future broadcast packets - * (i.e., MMCs). With some hardware, setting the GTK may start - * MMC transmission. - * - * NOTE: - * - * - If wusb_dev->usb_dev is not NULL, then usb_dev is valid - * (wusb_dev has a refcount on it). Likewise, if usb_dev->wusb_dev - * is not NULL, usb_dev->wusb_dev is valid (usb_dev keeps a - * refcount on it). - * - * Most of the times when you need to use it, it will be non-NULL, - * so there is no real need to check for it (wusb_dev will - * disappear before usb_dev). - * - * - The following fields need to be filled out before calling - * wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}. - * - * - there is no wusbhc_init() method, we do everything in - * wusbhc_create(). - * - * - Creation is done in two phases, wusbhc_create() and - * wusbhc_create_b(); b are the parts that need to be called after - * calling usb_hcd_add(&wusbhc->usb_hcd). - */ -struct wusbhc { - struct usb_hcd usb_hcd; /* HAS TO BE 1st */ - struct device *dev; - struct uwb_rc *uwb_rc; - struct uwb_pal pal; - - unsigned trust_timeout; /* in jiffies */ - struct wusb_ckhdid chid; - uint8_t phy_rate; - uint8_t dnts_num_slots; - uint8_t dnts_interval; - uint8_t retry_count; - struct wuie_host_info *wuie_host_info; - - struct mutex mutex; /* locks everything else */ - u16 cluster_id; /* Wireless USB Cluster ID */ - struct wusb_port *port; /* Fake port status handling */ - struct wusb_dev_info *dev_info; /* for Set Device Info mgmt */ - u8 ports_max; - unsigned active:1; /* currently xmit'ing MMCs */ - struct wuie_keep_alive keep_alive_ie; /* protected by mutex */ - struct delayed_work keep_alive_timer; - struct list_head cack_list; /* Connect acknowledging */ - size_t cack_count; /* protected by 'mutex' */ - struct wuie_connect_ack cack_ie; - struct uwb_rsv *rsv; /* cluster bandwidth reservation */ - - struct mutex mmcie_mutex; /* MMC WUIE handling */ - struct wuie_hdr **mmcie; /* WUIE array */ - u8 mmcies_max; - /* FIXME: make wusbhc_ops? */ - int (*start)(struct wusbhc *wusbhc); - void (*stop)(struct wusbhc *wusbhc, int delay); - int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - u8 handle, struct wuie_hdr *wuie); - int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle); - int (*dev_info_set)(struct wusbhc *, struct wusb_dev *wusb_dev); - int (*bwa_set)(struct wusbhc *wusbhc, s8 stream_index, - const struct uwb_mas_bm *); - int (*set_ptk)(struct wusbhc *wusbhc, u8 port_idx, - u32 tkid, const void *key, size_t key_size); - int (*set_gtk)(struct wusbhc *wusbhc, - u32 tkid, const void *key, size_t key_size); - int (*set_num_dnts)(struct wusbhc *wusbhc, u8 interval, u8 slots); - - struct { - struct usb_key_descriptor descr; - u8 data[16]; /* GTK key data */ - } __attribute__((packed)) gtk; - u8 gtk_index; - u32 gtk_tkid; - - /* workqueue for WUSB security related tasks. */ - struct workqueue_struct *wq_security; - struct work_struct gtk_rekey_work; - - struct usb_encryption_descriptor *ccm1_etd; -}; - -#define usb_hcd_to_wusbhc(u) container_of((u), struct wusbhc, usb_hcd) - - -extern int wusbhc_create(struct wusbhc *); -extern int wusbhc_b_create(struct wusbhc *); -extern void wusbhc_b_destroy(struct wusbhc *); -extern void wusbhc_destroy(struct wusbhc *); -extern int wusb_dev_sysfs_add(struct wusbhc *, struct usb_device *, - struct wusb_dev *); -extern void wusb_dev_sysfs_rm(struct wusb_dev *); -extern int wusbhc_sec_create(struct wusbhc *); -extern int wusbhc_sec_start(struct wusbhc *); -extern void wusbhc_sec_stop(struct wusbhc *); -extern void wusbhc_sec_destroy(struct wusbhc *); -extern void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, - int status); -void wusbhc_reset_all(struct wusbhc *wusbhc); - -int wusbhc_pal_register(struct wusbhc *wusbhc); -void wusbhc_pal_unregister(struct wusbhc *wusbhc); - -/* - * Return @usb_dev's @usb_hcd (properly referenced) or NULL if gone - * - * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) - * - * This is a safe assumption as @usb_dev->bus is referenced all the - * time during the @usb_dev life cycle. - */ -static inline -struct usb_hcd *usb_hcd_get_by_usb_dev(struct usb_device *usb_dev) -{ - struct usb_hcd *usb_hcd; - usb_hcd = bus_to_hcd(usb_dev->bus); - return usb_get_hcd(usb_hcd); -} - -/* - * Increment the reference count on a wusbhc. - * - * @wusbhc's life cycle is identical to that of the underlying usb_hcd. - */ -static inline struct wusbhc *wusbhc_get(struct wusbhc *wusbhc) -{ - return usb_get_hcd(&wusbhc->usb_hcd) ? wusbhc : NULL; -} - -/* - * Return the wusbhc associated to a @usb_dev - * - * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) - * - * @returns: wusbhc for @usb_dev; NULL if the @usb_dev is being torn down. - * WARNING: referenced at the usb_hcd level, unlocked - * - * FIXME: move offline - */ -static inline struct wusbhc *wusbhc_get_by_usb_dev(struct usb_device *usb_dev) -{ - struct wusbhc *wusbhc = NULL; - struct usb_hcd *usb_hcd; - if (usb_dev->devnum > 1 && !usb_dev->wusb) { - /* but root hubs */ - dev_err(&usb_dev->dev, "devnum %d wusb %d\n", usb_dev->devnum, - usb_dev->wusb); - BUG_ON(usb_dev->devnum > 1 && !usb_dev->wusb); - } - usb_hcd = usb_hcd_get_by_usb_dev(usb_dev); - if (usb_hcd == NULL) - return NULL; - BUG_ON(usb_hcd->wireless == 0); - return wusbhc = usb_hcd_to_wusbhc(usb_hcd); -} - - -static inline void wusbhc_put(struct wusbhc *wusbhc) -{ - usb_put_hcd(&wusbhc->usb_hcd); -} - -int wusbhc_start(struct wusbhc *wusbhc); -void wusbhc_stop(struct wusbhc *wusbhc); -extern int wusbhc_chid_set(struct wusbhc *, const struct wusb_ckhdid *); - -/* Device connect handling */ -extern int wusbhc_devconnect_create(struct wusbhc *); -extern void wusbhc_devconnect_destroy(struct wusbhc *); -extern int wusbhc_devconnect_start(struct wusbhc *wusbhc); -extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc); -extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr, - struct wusb_dn_hdr *dn_hdr, size_t size); -extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port); -extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, - void *priv); -extern int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, - u8 addr); - -/* Wireless USB fake Root Hub methods */ -extern int wusbhc_rh_create(struct wusbhc *); -extern void wusbhc_rh_destroy(struct wusbhc *); - -extern int wusbhc_rh_status_data(struct usb_hcd *, char *); -extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16); -extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned); - -/* MMC handling */ -extern int wusbhc_mmcie_create(struct wusbhc *); -extern void wusbhc_mmcie_destroy(struct wusbhc *); -extern int wusbhc_mmcie_set(struct wusbhc *, u8 interval, u8 repeat_cnt, - struct wuie_hdr *); -extern void wusbhc_mmcie_rm(struct wusbhc *, struct wuie_hdr *); - -/* Bandwidth reservation */ -int wusbhc_rsv_establish(struct wusbhc *wusbhc); -void wusbhc_rsv_terminate(struct wusbhc *wusbhc); - -/* - * I've always said - * I wanted a wedding in a church... - * - * but lately I've been thinking about - * the Botanical Gardens. - * - * We could do it by the tulips. - * It'll be beautiful - * - * --Security! - */ -extern int wusb_dev_sec_add(struct wusbhc *, struct usb_device *, - struct wusb_dev *); -extern void wusb_dev_sec_rm(struct wusb_dev *) ; -extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *, - struct wusb_ckhdid *ck); -void wusbhc_gtk_rekey(struct wusbhc *wusbhc); -int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev); - - -/* WUSB Cluster ID handling */ -extern u8 wusb_cluster_id_get(void); -extern void wusb_cluster_id_put(u8); - -/* - * wusb_port_by_idx - return the port associated to a zero-based port index - * - * NOTE: valid without locking as long as wusbhc is referenced (as the - * number of ports doesn't change). The data pointed to has to - * be verified though :) - */ -static inline struct wusb_port *wusb_port_by_idx(struct wusbhc *wusbhc, - u8 port_idx) -{ - return &wusbhc->port[port_idx]; -} - -/* - * wusb_port_no_to_idx - Convert port number (per usb_dev->portnum) to - * a port_idx. - * - * USB stack USB ports are 1 based!! - * - * NOTE: only valid for WUSB devices!!! - */ -static inline u8 wusb_port_no_to_idx(u8 port_no) -{ - return port_no - 1; -} - -extern struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *, - struct usb_device *); - -/* - * Return a referenced wusb_dev given a @usb_dev - * - * Returns NULL if the usb_dev is being torn down. - * - * FIXME: move offline - */ -static inline -struct wusb_dev *wusb_dev_get_by_usb_dev(struct usb_device *usb_dev) -{ - struct wusbhc *wusbhc; - struct wusb_dev *wusb_dev; - wusbhc = wusbhc_get_by_usb_dev(usb_dev); - if (wusbhc == NULL) - return NULL; - mutex_lock(&wusbhc->mutex); - wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev); - mutex_unlock(&wusbhc->mutex); - wusbhc_put(wusbhc); - return wusb_dev; -} - -/* Misc */ - -extern struct workqueue_struct *wusbd; -#endif /* #ifndef __WUSBHC_H__ */ |