diff options
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt | 32 | ||||
| -rw-r--r-- | drivers/gpio/gpio-syscon.c | 31 |
2 files changed, 63 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt new file mode 100644 index 000000000000..f9231df17c2b --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt @@ -0,0 +1,32 @@ +Rockchip RK3328 GRF (General Register Files) GPIO controller. + +In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute +control, can also be used for general purpose. It is manipulated by the +GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can +also be set in the same way. + +Currently this GPIO controller only supports the mute pin. If needed in the +future, the HDMI pins support can also be added. + +Required properties: +- compatible: Should contain "rockchip,rk3328-grf-gpio". +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Should be 2. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = Active high, + 1 = Active low. + +Example: + + grf: syscon@ff100000 { + compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd"; + + grf_gpio: grf-gpio { + compatible = "rockchip,rk3328-grf-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; + +Note: The grf_gpio node should be declared as the child of the GRF (General +Register File) node. The GPIO_MUTE pin is referred to as <&grf_gpio 0>. diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c index d40cabd15e9e..87c18a544513 100644 --- a/drivers/gpio/gpio-syscon.c +++ b/drivers/gpio/gpio-syscon.c @@ -135,6 +135,33 @@ static const struct syscon_gpio_data clps711x_mctrl_gpio = { .dat_bit_offset = 0x40 * 8 + 8, }; +static void rockchip_gpio_set(struct gpio_chip *chip, unsigned int offset, + int val) +{ + struct syscon_gpio_priv *priv = gpiochip_get_data(chip); + unsigned int offs; + u8 bit; + u32 data; + int ret; + + offs = priv->dreg_offset + priv->data->dat_bit_offset + offset; + bit = offs % SYSCON_REG_BITS; + data = (val ? BIT(bit) : 0) | BIT(bit + 16); + ret = regmap_write(priv->syscon, + (offs / SYSCON_REG_BITS) * SYSCON_REG_SIZE, + data); + if (ret < 0) + dev_err(chip->parent, "gpio write failed ret(%d)\n", ret); +} + +static const struct syscon_gpio_data rockchip_rk3328_gpio_mute = { + /* RK3328 GPIO_MUTE is an output only pin at GRF_SOC_CON10[1] */ + .flags = GPIO_SYSCON_FEAT_OUT, + .bit_count = 1, + .dat_bit_offset = 0x0428 * 8 + 1, + .set = rockchip_gpio_set, +}; + #define KEYSTONE_LOCK_BIT BIT(0) static void keystone_gpio_set(struct gpio_chip *chip, unsigned offset, int val) @@ -175,6 +202,10 @@ static const struct of_device_id syscon_gpio_ids[] = { .compatible = "ti,keystone-dsp-gpio", .data = &keystone_dsp_gpio, }, + { + .compatible = "rockchip,rk3328-grf-gpio", + .data = &rockchip_rk3328_gpio_mute, + }, { } }; MODULE_DEVICE_TABLE(of, syscon_gpio_ids); |