diff options
| -rw-r--r-- | Documentation/hwmon/sparx5-temp.rst | 33 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/sparx5-temp.c | 168 |
4 files changed, 212 insertions, 0 deletions
diff --git a/Documentation/hwmon/sparx5-temp.rst b/Documentation/hwmon/sparx5-temp.rst new file mode 100644 index 000000000000..014080908954 --- /dev/null +++ b/Documentation/hwmon/sparx5-temp.rst @@ -0,0 +1,33 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Microchip SparX-5 SoC +===================== + +Supported chips: + + * VSC7546, VSC7549, VSC755, VSC7556, and VSC7558 (Sparx5 series) + + Prefix: 'sparx5-temp' + + Addresses scanned: - + + Datasheet: Provided by Microchip upon request and under NDA + +Author: Lars Povlsen <lars.povlsen@microchip.com> + +Description +----------- + +The Sparx5 SoC contains a temperature sensor based on the MR74060 +Moortec IP. + +The sensor has a range of -40°C to +125°C and an accuracy of +/-5°C. + +Sysfs entries +------------- + +The following attributes are supported. + +======================= ======================================================== +temp1_input Die temperature (in millidegree Celsius.) +======================= ======================================================== diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 7b11d622b82d..8dc28b26916e 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -525,6 +525,16 @@ config SENSORS_I5K_AMB This driver can also be built as a module. If so, the module will be called i5k_amb. +config SENSORS_SPARX5 + tristate "Sparx5 SoC temperature sensor" + depends on ARCH_SPARX5 || COMPILE_TEST + help + If you say yes here you get support for temperature monitoring + with the Microchip Sparx5 SoC. + + This driver can also be built as a module. If so, the module + will be called sparx5-temp. + config SENSORS_F71805F tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" depends on !PPC diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 18e1ef74ade7..a8f4b35b136b 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -168,6 +168,7 @@ obj-$(CONFIG_SENSORS_SMM665) += smm665.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o +obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o obj-$(CONFIG_SENSORS_STTS751) += stts751.o obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o obj-$(CONFIG_SENSORS_TC74) += tc74.o diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c new file mode 100644 index 000000000000..7d7a060259a8 --- /dev/null +++ b/drivers/hwmon/sparx5-temp.c @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* Sparx5 SoC temperature sensor driver + * + * Copyright (C) 2020 Lars Povlsen <lars.povlsen@microchip.com> + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/hwmon.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#define TEMP_CTRL 0 +#define TEMP_CFG 4 +#define TEMP_CFG_CYCLES GENMASK(24, 15) +#define TEMP_CFG_ENA BIT(0) +#define TEMP_STAT 8 +#define TEMP_STAT_VALID BIT(12) +#define TEMP_STAT_TEMP GENMASK(11, 0) + +struct s5_hwmon { + void __iomem *base; + struct clk *clk; +}; + +static void s5_temp_clk_disable(void *data) +{ + struct clk *clk = data; + + clk_disable_unprepare(clk); +} + +static void s5_temp_enable(struct s5_hwmon *hwmon) +{ + u32 val = readl(hwmon->base + TEMP_CFG); + u32 clk = clk_get_rate(hwmon->clk) / USEC_PER_SEC; + + val &= ~TEMP_CFG_CYCLES; + val |= FIELD_PREP(TEMP_CFG_CYCLES, clk); + val |= TEMP_CFG_ENA; + + writel(val, hwmon->base + TEMP_CFG); +} + +static int s5_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *temp) +{ + struct s5_hwmon *hwmon = dev_get_drvdata(dev); + int rc = 0, value; + u32 stat; + + switch (attr) { + case hwmon_temp_input: + stat = readl_relaxed(hwmon->base + TEMP_STAT); + if (!(stat & TEMP_STAT_VALID)) + return -EIO; + value = stat & TEMP_STAT_TEMP; + /* + * From register documentation: + * Temp(C) = TEMP_SENSOR_STAT.TEMP / 4096 * 352.2 - 109.4 + */ + value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094; + /* + * Scale down by 10 from above and multiply by 1000 to + * have millidegrees as specified by the hwmon sysfs + * interface. + */ + value *= 100; + *temp = value; + break; + default: + rc = -EOPNOTSUPP; + break; + } + + return rc; +} + +static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + if (type != hwmon_temp) + return 0; + + switch (attr) { + case hwmon_temp_input: + return 0444; + default: + return 0; + } +} + +static const struct hwmon_channel_info *s5_info[] = { + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static const struct hwmon_ops s5_hwmon_ops = { + .is_visible = s5_is_visible, + .read = s5_read, +}; + +static const struct hwmon_chip_info s5_chip_info = { + .ops = &s5_hwmon_ops, + .info = s5_info, +}; + +static int s5_temp_probe(struct platform_device *pdev) +{ + struct device *hwmon_dev; + struct s5_hwmon *hwmon; + int ret; + + hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + hwmon->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(hwmon->base)) + return PTR_ERR(hwmon->base); + + hwmon->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(hwmon->clk)) + return PTR_ERR(hwmon->clk); + + ret = clk_prepare_enable(hwmon->clk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(&pdev->dev, s5_temp_clk_disable, + hwmon->clk); + if (ret) + return ret; + + s5_temp_enable(hwmon); + + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, + "s5_temp", + hwmon, + &s5_chip_info, + NULL); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +const struct of_device_id s5_temp_match[] = { + { .compatible = "microchip,sparx5-temp" }, + {}, +}; +MODULE_DEVICE_TABLE(of, s5_temp_match); + +static struct platform_driver s5_temp_driver = { + .probe = s5_temp_probe, + .driver = { + .name = "sparx5-temp", + .of_match_table = s5_temp_match, + }, +}; + +module_platform_driver(s5_temp_driver); + +MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>"); +MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver"); +MODULE_LICENSE("GPL"); |