summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt23
-rw-r--r--drivers/phy/Kconfig9
-rw-r--r--drivers/phy/Makefile1
-rw-r--r--drivers/phy/phy-bcm-ns-usb3.c274
4 files changed, 307 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
new file mode 100644
index 000000000000..09aeba94538d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
@@ -0,0 +1,23 @@
+Driver for Broadcom Northstar USB 3.0 PHY
+
+Required properties:
+
+- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
+- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
+ MMI.
+- reg-names: "dmp" and "ccb-mii"
+
+Initialization of USB 3.0 PHY depends on Northstar version. There are currently
+three known series: Ax, Bx and Cx.
+Known A0: BCM4707 rev 0
+Known B0: BCM4707 rev 4, BCM53573 rev 2
+Known B1: BCM4707 rev 6
+Known C0: BCM47094 rev 0
+
+Example:
+ usb3-phy {
+ compatible = "brcm,ns-ax-usb3-phy";
+ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+ reg-names = "dmp", "ccb-mii";
+ #phy-cells = <0>;
+ };
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 19bff3a10f69..afbdd6a9b964 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2
Enable this to support Broadcom USB 2.0 PHY connected to the USB
controller on Northstar family.
+config PHY_BCM_NS_USB3
+ tristate "Broadcom Northstar USB 3.0 PHY Driver"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support Broadcom USB 3.0 PHY connected to the USB
+ controller on Northstar family.
+
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 90ae19879b0a..b99370a14ed9 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
+obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/phy-bcm-ns-usb3.c
new file mode 100644
index 000000000000..f420fa4bebfc
--- /dev/null
+++ b/drivers/phy/phy-bcm-ns-usb3.c
@@ -0,0 +1,274 @@
+/*
+ * Broadcom Northstar USB 3.0 PHY Driver
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * All magic values used for initialization (and related comments) were obtained
+ * from Broadcom's SDK:
+ * Copyright (c) Broadcom Corp, 2012
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/slab.h>
+
+#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */
+
+enum bcm_ns_family {
+ BCM_NS_UNKNOWN,
+ BCM_NS_AX,
+ BCM_NS_BX,
+};
+
+struct bcm_ns_usb3 {
+ struct device *dev;
+ enum bcm_ns_family family;
+ void __iomem *dmp;
+ void __iomem *ccb_mii;
+ struct phy *phy;
+};
+
+static const struct of_device_id bcm_ns_usb3_id_table[] = {
+ {
+ .compatible = "brcm,ns-ax-usb3-phy",
+ .data = (int *)BCM_NS_AX,
+ },
+ {
+ .compatible = "brcm,ns-bx-usb3-phy",
+ .data = (int *)BCM_NS_BX,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
+
+static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
+ u32 mask, u32 value, unsigned long timeout)
+{
+ unsigned long deadline = jiffies + timeout;
+ u32 val;
+
+ do {
+ val = readl(addr);
+ if ((val & mask) == value)
+ return 0;
+ cpu_relax();
+ udelay(10);
+ } while (!time_after_eq(jiffies, deadline));
+
+ dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
+
+ return -EBUSY;
+}
+
+static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
+{
+ return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
+ 0x0100, 0x0000,
+ usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
+}
+
+static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
+{
+ int err;
+
+ err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
+ if (err < 0) {
+ dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
+ return err;
+ }
+
+ writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
+
+ return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
+{
+ int err;
+
+ /* Enable MDIO. Setting MDCDIV as 26 */
+ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+ /* Wait for MDIO? */
+ udelay(2);
+
+ /* USB3 PLL Block */
+ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+ if (err < 0)
+ return err;
+
+ /* Assert Ana_Pllseq start */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
+
+ /* Assert CML Divider ratio to 26 */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+ /* Asserting PLL Reset */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
+
+ /* Deaaserting PLL Reset */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
+
+ /* Waiting MII Mgt interface idle */
+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+ /* Deasserting USB3 system reset */
+ writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+ /* PLL frequency monitor enable */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
+
+ /* PIPE Block */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
+
+ /* CMPMAX & CMPMINTH setting */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
+
+ /* DEGLITCH MIN & MAX setting */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
+
+ /* TXPMD block */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+ /* Enabling SSC */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+ /* Waiting MII Mgt interface idle */
+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+ return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
+{
+ int err;
+
+ /* Enable MDIO. Setting MDCDIV as 26 */
+ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+ /* Wait for MDIO? */
+ udelay(2);
+
+ /* PLL30 block */
+ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+ if (err < 0)
+ return err;
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
+
+ /* Enable SSC */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+ /* Waiting MII Mgt interface idle */
+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+ /* Deasserting USB3 system reset */
+ writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+ return 0;
+}
+
+static int bcm_ns_usb3_phy_init(struct phy *phy)
+{
+ struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
+ int err;
+
+ /* Perform USB3 system soft reset */
+ writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
+
+ switch (usb3->family) {
+ case BCM_NS_AX:
+ err = bcm_ns_usb3_phy_init_ns_ax(usb3);
+ break;
+ case BCM_NS_BX:
+ err = bcm_ns_usb3_phy_init_ns_bx(usb3);
+ break;
+ default:
+ WARN_ON(1);
+ err = -ENOTSUPP;
+ }
+
+ return err;
+}
+
+static const struct phy_ops ops = {
+ .init = bcm_ns_usb3_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static int bcm_ns_usb3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id;
+ struct bcm_ns_usb3 *usb3;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+
+ usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
+ if (!usb3)
+ return -ENOMEM;
+
+ usb3->dev = dev;
+
+ of_id = of_match_device(bcm_ns_usb3_id_table, dev);
+ if (!of_id)
+ return -EINVAL;
+ usb3->family = (enum bcm_ns_family)of_id->data;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
+ usb3->dmp = devm_ioremap_resource(dev, res);
+ if (IS_ERR(usb3->dmp)) {
+ dev_err(dev, "Failed to map DMP regs\n");
+ return PTR_ERR(usb3->dmp);
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
+ usb3->ccb_mii = devm_ioremap_resource(dev, res);
+ if (IS_ERR(usb3->ccb_mii)) {
+ dev_err(dev, "Failed to map ChipCommon B MII regs\n");
+ return PTR_ERR(usb3->ccb_mii);
+ }
+
+ usb3->phy = devm_phy_create(dev, NULL, &ops);
+ if (IS_ERR(usb3->phy)) {
+ dev_err(dev, "Failed to create PHY\n");
+ return PTR_ERR(usb3->phy);
+ }
+
+ phy_set_drvdata(usb3->phy, usb3);
+ platform_set_drvdata(pdev, usb3);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (!IS_ERR(phy_provider))
+ dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver bcm_ns_usb3_driver = {
+ .probe = bcm_ns_usb3_probe,
+ .driver = {
+ .name = "bcm_ns_usb3",
+ .of_match_table = bcm_ns_usb3_id_table,
+ },
+};
+module_platform_driver(bcm_ns_usb3_driver);
+
+MODULE_LICENSE("GPL v2");