diff options
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt | 35 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml | 72 |
2 files changed, 72 insertions, 35 deletions
diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt deleted file mode 100644 index e1c49b660d3a..000000000000 --- a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.txt +++ /dev/null @@ -1,35 +0,0 @@ -Mediatek MT7621 SoC GPIO controller bindings - -The IP core used inside these SoCs has 3 banks of 32 GPIOs each. -The registers of all the banks are interwoven inside one single IO range. -We load one GPIO controller instance per bank. Also the GPIO controller can receive -interrupts on any of the GPIOs, either edge or level. It then interrupts the CPU -using GIC INT12. - -Required properties for the top level node: -- #gpio-cells : Should be two. The first cell is the GPIO pin number and the - second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. - Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt. Should be 2. The first cell defines the interrupt number, - the second encodes the trigger flags encoded as described in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- compatible: - - "mediatek,mt7621-gpio" for Mediatek controllers -- reg : Physical base address and length of the controller's registers -- interrupt-parent : phandle of the parent interrupt controller. -- interrupts : Interrupt specifier for the controllers interrupt. -- interrupt-controller : Mark the device node as an interrupt controller. -- gpio-controller : Marks the device node as a GPIO controller. - -Example: - gpio@600 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "mediatek,mt7621-gpio"; - gpio-controller; - interrupt-controller; - reg = <0x600 0x100>; - interrupt-parent = <&gic>; - interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml new file mode 100644 index 000000000000..5bbb2a31266e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/mediatek,mt7621-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT7621 SoC GPIO controller + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +description: | + The IP core used inside these SoCs has 3 banks of 32 GPIOs each. + The registers of all the banks are interwoven inside one single IO range. + We load one GPIO controller instance per bank. Also the GPIO controller can receive + interrupts on any of the GPIOs, either edge or level. It then interrupts the CPU + using GIC INT12. + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + const: mediatek,mt7621-gpio + + reg: + maxItems: 1 + + "#gpio-cells": + const: 2 + + gpio-controller: true + gpio-ranges: true + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - "#gpio-cells" + - gpio-controller + - gpio-ranges + - interrupt-controller + - "#interrupt-cells" + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/mips-gic.h> + + gpio@600 { + compatible = "mediatek,mt7621-gpio"; + reg = <0x600 0x100>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 95>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>; + }; + +... |