diff options
| -rw-r--r-- | arch/arm/mach-bcmring/core.c | 118 |
1 files changed, 8 insertions, 110 deletions
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 2cb39890256e..43eadbcc29ed 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -28,8 +28,6 @@ #include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/amba/bus.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> #include <linux/clkdev.h> #include <mach/csp/mm_addr.h> @@ -113,8 +111,8 @@ static struct clk dummy_apb_pclk = { #define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000) #endif -static struct clk sp804_timer1_clk = { - .name = "sp804-timer-1", +static struct clk sp804_timer012_clk = { + .name = "sp804-timer-0,1,2", .type = CLK_TYPE_PRIMARY, .mode = CLK_MODE_XTAL, .rate_hz = TIMER1_FREQUENCY_MHZ * 1000000, @@ -137,10 +135,14 @@ static struct clk_lookup lookups[] = { }, { /* UART1 */ .dev_id = "uartb", .clk = &uart_clk, + }, { /* SP804 timer 0 */ + .dev_id = "sp804", + .con_id = "timer0", + .clk = &sp804_timer012_clk, }, { /* SP804 timer 1 */ .dev_id = "sp804", .con_id = "timer1", - .clk = &sp804_timer1_clk, + .clk = &sp804_timer012_clk, }, { /* SP804 timer 3 */ .dev_id = "sp804", .con_id = "timer3", @@ -203,100 +205,6 @@ void __init bcmring_amba_init(void) #define TIMER2_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x40)) #define TIMER3_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x60)) -#define TICKS_PER_uSEC TIMER0_FREQUENCY_MHZ - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_10 (mSEC_1 * 10) - -/* - * How long is the timer interval? - */ -#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) -#if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) -#define TIMER_DIVISOR (TIMER_CTRL_DIV256) -#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) -#elif TIMER_INTERVAL >= 0x10000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_DIVISOR (TIMER_CTRL_DIV16) -#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) -#else -#define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_DIVISOR (TIMER_CTRL_DIV1) -#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) -#endif - -static void timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - unsigned long ctrl; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); - - ctrl = TIMER_CTRL_PERIODIC; - ctrl |= - TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE | - TIMER_CTRL_ENABLE; - break; - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl = TIMER_CTRL_ONESHOT; - ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE; - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - ctrl = 0; - } - - writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL); -} - -static int timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL); - - writel(evt, TIMER0_VA_BASE + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL); - - return 0; -} - -static struct clock_event_device timer0_clockevent = { - .name = "timer0", - .shift = 32, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = timer_set_mode, - .set_next_event = timer_set_next_event, -}; - -/* - * IRQ handler for the timer - */ -static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &timer0_clockevent; - - writel(1, TIMER0_VA_BASE + TIMER_INTCLR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction bcmring_timer_irq = { - .name = "bcmring Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = bcmring_timer_interrupt, -}; - static int __init bcmring_clocksource_init(void) { /* setup timer1 as free-running clocksource */ @@ -325,19 +233,9 @@ void __init bcmring_init_timer(void) /* * Make irqs happen for the system timer */ - setup_irq(IRQ_TIMER0, &bcmring_timer_irq); - bcmring_clocksource_init(); - timer0_clockevent.mult = - div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift); - timer0_clockevent.max_delta_ns = - clockevent_delta2ns(0xffffffff, &timer0_clockevent); - timer0_clockevent.min_delta_ns = - clockevent_delta2ns(0xf, &timer0_clockevent); - - timer0_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&timer0_clockevent); + sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0"); } struct sys_timer bcmring_timer = { |