summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml')
-rw-r--r--Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml78
1 files changed, 72 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index fa1db57b2b97..59d3bbb5883a 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -28,10 +28,10 @@ allOf:
properties:
reg:
- description: |
- It should contain Data Bus Interface (dbi) and config registers for all
- versions.
- For designware core version >= 4.80, it may contain ATU address space.
+ description:
+ At least DBI reg-space and peripheral devices CFG-space outbound window
+ are required for the normal controller work. iATU memory IO region is
+ also required if the space is unrolled (IP-core version >= 4.80a).
minItems: 2
maxItems: 5
@@ -39,8 +39,74 @@ properties:
minItems: 2
maxItems: 5
items:
- enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
- parf, cfg, link, ulreg, smu, mpu, apb, phy ]
+ oneOf:
+ - description:
+ Basic DWC PCIe controller configuration-space accessible over
+ the DBI interface. This memory space is either activated with
+ CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+ with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+ via the PL viewports on the DWC PCIe controllers older than
+ v4.80a.
+ const: dbi
+ - description:
+ Shadow DWC PCIe config-space registers. This space is selected
+ by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+ the PCI-SIG PCIe CFG-space with the shadow registers for some
+ PCI Header space, PCI Standard and Extended Structures. It's
+ mainly relevant for the end-point controller configuration,
+ but still there are some shadow registers available for the
+ Root Port mode too.
+ const: dbi2
+ - description:
+ External Local Bus registers. It's an application-dependent
+ registers normally defined by the platform engineers. The space
+ can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+ be accessed over some platform-specific means (for instance
+ as a part of a system controller).
+ enum: [ elbi, app ]
+ - description:
+ iATU/eDMA registers common for all device functions. It's an
+ unrolled memory space with the internal Address Translation
+ Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+ and CS2 = 1. For IP-core releases prior v4.80a, these registers
+ have been programmed via an indirect addressing scheme using a
+ set of viewport CSRs mapped into the PL space. Note iATU is
+ normally mapped to the 0x0 address of this region, while eDMA
+ is available at 0x80000 base address.
+ const: atu
+ - description:
+ Platform-specific eDMA registers. Some platforms may have eDMA
+ CSRs mapped in a non-standard base address. The registers offset
+ can be changed or the MS/LS-bits of the address can be attached
+ in an additional RTL block before the MEM-IO transactions reach
+ the DW PCIe slave interface.
+ const: dma
+ - description:
+ PHY/PCS configuration registers. Some platforms can have the
+ PCS and PHY CSRs accessible over a dedicated memory mapped
+ region, but mainly these registers are indirectly accessible
+ either by means of the embedded PHY viewport schema or by some
+ platform-specific method.
+ const: phy
+ - description:
+ Outbound iATU-capable memory-region which will be used to access
+ the peripheral PCIe devices configuration space.
+ const: config
+ - description:
+ Vendor-specific CSR names. Consider using the generic names above
+ for new bindings.
+ oneOf:
+ - description: See native 'elbi/app' CSR region for details.
+ enum: [ apb, mgmt, link, ulreg, appl ]
+ - description: See native 'atu' CSR region for details.
+ enum: [ atu_dma ]
+ - description: Syscon-related CSR regions.
+ enum: [ smu, mpu ]
+ allOf:
+ - contains:
+ const: dbi
+ - contains:
+ const: config
interrupts:
description: