diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci')
4 files changed, 12 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt index c84bc027930b..760b4d740616 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt @@ -34,6 +34,7 @@ Required properties Optional properties: - reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal. +- vpcie-supply: The regulator in charge of PCIe port power. - phys: List of phandle and phy mode specifier, should be 0. - phy-names: Must be "phy". diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt index 3a6ce55dd310..20227a875ac8 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -78,7 +78,7 @@ Examples for MT7623: #reset-cells = <1>; }; - pcie: pcie-controller@1a140000 { + pcie: pcie@1a140000 { compatible = "mediatek,mt7623-pcie"; device_type = "pci"; reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ @@ -111,7 +111,6 @@ Examples for MT7623: 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ pcie@0,0 { - device_type = "pci"; reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -123,7 +122,6 @@ Examples for MT7623: }; pcie@1,0 { - device_type = "pci"; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -135,7 +133,6 @@ Examples for MT7623: }; pcie@2,0 { - device_type = "pci"; reg = <0x1000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -148,6 +145,7 @@ Examples for MT7623: }; Examples for MT2712: + pcie: pcie@11700000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; @@ -169,7 +167,6 @@ Examples for MT2712: ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; pcie0: pcie@0,0 { - device_type = "pci"; reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -189,7 +186,6 @@ Examples for MT2712: }; pcie1: pcie@1,0 { - device_type = "pci"; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -210,6 +206,7 @@ Examples for MT2712: }; Examples for MT7622: + pcie: pcie@1a140000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; @@ -243,7 +240,6 @@ Examples for MT7622: ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; pcie0: pcie@0,0 { - device_type = "pci"; reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -263,7 +259,6 @@ Examples for MT7622: }; pcie1: pcie@1,0 { - device_type = "pci"; reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 3c9d321b3d3b..1fd703bd73e0 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -189,6 +189,10 @@ Value type: <phandle> Definition: A phandle to the analog power supply for IC which generates reference clock +- vddpe-3v3-supply: + Usage: optional + Value type: <phandle> + Definition: A phandle to the PCIe endpoint power supply - phys: Usage: required for apq8084 diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index 76ba3a61d1a3..1fb614e615da 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -1,13 +1,15 @@ * Renesas R-Car PCIe interface Required properties: -compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; +compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; + "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7790" for the R8A7790 SoC; "renesas,pcie-r8a7791" for the R8A7791 SoC; "renesas,pcie-r8a7793" for the R8A7793 SoC; "renesas,pcie-r8a7795" for the R8A7795 SoC; "renesas,pcie-r8a7796" for the R8A7796 SoC; - "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device. + "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or + RZ/G1 compatible device. "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the |