diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
104 files changed, 2047 insertions, 298 deletions
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 61ddc3b5b247..8eec07d9d454 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -44,14 +44,21 @@ properties: minItems: 1 maxItems: 2 - qcom,dsb-element-size: + qcom,dsb-element-bits: description: Specifies the DSB(Discrete Single Bit) element size supported by the monitor. The associated aggregator will read this size before it is enabled. DSB element size currently only supports 32-bit and 64-bit. - $ref: /schemas/types.yaml#/definitions/uint8 enum: [32, 64] + qcom,cmb-element-bits: + description: + Specifies the CMB(Continuous Multi-Bit) element size supported by + the monitor. The associated aggregator will read this size before it + is enabled. CMB element size currently only supports 8-bit, 32-bit + and 64-bit. + enum: [8, 32, 64] + qcom,dsb-msrs-num: description: Specifies the number of DSB(Discrete Single Bit) MSR(mux select register) @@ -61,6 +68,15 @@ properties: minimum: 0 maximum: 32 + qcom,cmb-msrs-num: + description: + Specifies the number of CMB MSR(mux select register) registers supported + by the monitor. If this property is not configured or set to 0, it means + this TPDM doesn't support CMB MSR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 32 + clocks: maxItems: 1 @@ -94,7 +110,7 @@ examples: compatible = "qcom,coresight-tpdm", "arm,primecell"; reg = <0x0684c000 0x1000>; - qcom,dsb-element-size = /bits/ 8 <32>; + qcom,dsb-element-bits = <32>; qcom,dsb-msrs-num = <16>; clocks = <&aoss_qmp>; @@ -110,4 +126,22 @@ examples: }; }; + tpdm@6c29000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x06c29000 0x1000>; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_ipcc_out_funnel_center: endpoint { + remote-endpoint = <&funnel_center_in_tpdm_ipcc>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml index 3aaefdbe361e..9017c5a3f3d2 100644 --- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml +++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml @@ -18,6 +18,7 @@ properties: - const: brcm,gisb-arb - items: - enum: + - brcm,bcm74165-gisb-arb # for V7 new style 16nm chips - brcm,bcm7278-gisb-arb # for V7 28nm chips - brcm,bcm7435-gisb-arb # for newer 40nm chips - brcm,bcm7400-gisb-arb # for older 40nm chips and all 65nm chips diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml index 8386cfe21532..f0eabff86310 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml @@ -270,7 +270,7 @@ examples: port { ov7251_ep: endpoint { - data-lanes = <0 1>; + data-lanes = <0>; link-frequencies = /bits/ 64 <240000000 319200000>; remote-endpoint = <&csiphy3_ep>; }; diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml index 16024415a4a7..44c54b162bb1 100644 --- a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml @@ -14,9 +14,6 @@ description: The Nomadik I2C host controller began its life in the ST maintainers: - Linus Walleij <linus.walleij@linaro.org> -allOf: - - $ref: /schemas/i2c/i2c-controller.yaml# - # Need a custom select here or 'arm,primecell' will match on lots of nodes select: properties: @@ -24,21 +21,23 @@ select: contains: enum: - st,nomadik-i2c + - mobileye,eyeq5-i2c required: - compatible properties: compatible: oneOf: - # The variant found in STn8815 - items: - const: st,nomadik-i2c - const: arm,primecell - # The variant found in DB8500 - items: - const: stericsson,db8500-i2c - const: st,nomadik-i2c - const: arm,primecell + - items: + - const: mobileye,eyeq5-i2c + - const: arm,primecell reg: maxItems: 1 @@ -55,7 +54,7 @@ properties: - items: - const: mclk - const: apb_pclk - # Clock name in DB8500 + # Clock name in DB8500 or EyeQ5 - items: - const: i2cclk - const: apb_pclk @@ -70,6 +69,16 @@ properties: minimum: 1 maximum: 400000 + mobileye,olb: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to OLB system controller node. + - description: Platform-wide controller ID (integer starting from zero). + description: + The phandle pointing to OLB system controller node, with the I2C + controller index. + required: - compatible - reg @@ -79,6 +88,20 @@ required: unevaluatedProperties: false +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + const: mobileye,eyeq5-i2c + then: + required: + - mobileye,olb + else: + properties: + mobileye,olb: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> @@ -111,5 +134,19 @@ examples: clocks = <&i2c0clk>, <&pclki2c0>; clock-names = "mclk", "apb_pclk"; }; + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + i2c@300000 { + compatible = "mobileye,eyeq5-i2c", "arm,primecell"; + reg = <0x300000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&i2c_ser_clk>, <&i2c_clk>; + clock-names = "i2cclk", "apb_pclk"; + mobileye,olb = <&olb 0>; + }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml index 261601729745..36775f8f71df 100644 --- a/Documentation/devicetree/bindings/iio/adc/adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml @@ -22,7 +22,6 @@ properties: maxItems: 1 label: - $ref: /schemas/types.yaml#/definitions/string description: Unique name to identify which channel this is. bipolar: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml index 7aa748d6b7a0..eecd5fbab695 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -44,6 +44,9 @@ properties: Pin that controls the powerdown mode of the device. maxItems: 1 + io-backends: + maxItems: 1 + reset-gpios: description: Reset pin for the device. @@ -68,6 +71,7 @@ examples: reg = <0>; clocks = <&adc_clk>; clock-names = "adc-clk"; + io-backends = <&iio_backend>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml index 9996dd93f84b..3d49d21ad33d 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -39,12 +39,15 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: A reference to a the actual ADC to which this FPGA ADC interfaces to. + deprecated: true + + '#io-backend-cells': + const: 0 required: - compatible - dmas - reg - - adi,adc-dev additionalProperties: false @@ -55,7 +58,6 @@ examples: reg = <0x44a00000 0x10000>; dmas = <&rx_dma 0>; dma-names = "rx"; - - adi,adc-dev = <&spi_adc>; + #io-backend-cells = <0>; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml new file mode 100644 index 000000000000..47a11a9ac95e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PAC1934 Power Monitors with Accumulator + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + This device is part of the Microchip family of Power Monitors with + Accumulator. + The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf + +properties: + compatible: + enum: + - microchip,pac1931 + - microchip,pac1932 + - microchip,pac1933 + - microchip,pac1934 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + interrupts: + maxItems: 1 + + slow-io-gpios: + description: + A GPIO used to trigger a change is sampling rate (lowering the chip power + consumption). If configured in SLOW mode, if this pin is forced high, + sampling rate is forced to eight samples/second. When it is forced low, + the sampling rate is 1024 samples/second unless a different sample rate + has been programmed. + +patternProperties: + "^channel@[1-4]+$": + type: object + $ref: adc.yaml + description: + Represents the external channels which are connected to the ADC. + + properties: + reg: + items: + minimum: 1 + maximum: 4 + + shunt-resistor-micro-ohms: + description: + Value in micro Ohms of the shunt resistor connected between + the SENSE+ and SENSE- inputs, across which the current is measured. + Value is needed to compute the scaling of the measured current. + + required: + - reg + - shunt-resistor-micro-ohms + + unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <24900000>; + label = "CPU"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <49900000>; + label = "GPU"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <75000000>; + label = "MEM"; + bipolar; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <100000000>; + label = "NET"; + bipolar; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml index dacc526dc695..dfc3f512918f 100644 --- a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml @@ -31,7 +31,6 @@ properties: - description: normal conversion, include EOC (End of Conversion), ECH (End of Chain), JEOC (End of Injected Conversion) and JECH (End of injected Chain). - - description: Self-testing Interrupts. clocks: maxItems: 1 @@ -70,8 +69,7 @@ examples: reg = <0x44530000 0x10000>; interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_ADC1_GATE>; clock-names = "ipg"; vref-supply = <®_vref_1v8>; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 40fa0710f1f0..c28db0d635a0 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -75,7 +75,6 @@ patternProperties: in the PMIC-specific files in include/dt-bindings/iio/. label: - $ref: /schemas/types.yaml#/definitions/string description: | ADC input of the platform as seen in the schematics. For thermistor inputs connected to generic AMUX or GPIO inputs diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml index 88e008629ea8..af2c3a67f888 100644 --- a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml @@ -25,7 +25,14 @@ description: | properties: compatible: - const: richtek,rtq6056 + oneOf: + - enum: + - richtek,rtq6056 + - richtek,rtq6059 + - items: + - enum: + - richtek,rtq6053 + - const: richtek,rtq6056 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml new file mode 100644 index 000000000000..bf5a43a81d59 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments' ads1298 medical ADC chips + +description: | + Datasheet at: https://www.ti.com/product/ADS1298 + Bindings for this chip aren't complete. + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +properties: + compatible: + enum: + - ti,ads1298 + + reg: + maxItems: 1 + + spi-cpha: true + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: + Analog power supply, voltage between AVDD and AVSS. When providing a + symmetric +/- 2.5V, the regulator should report 5V. + + vref-supply: + description: + Optional reference voltage. If omitted, internal reference is used, + which is 2.4V when analog supply is below 4.4V, 4V otherwise. + + clocks: + description: Optional 2.048 MHz external source clock on CLK pin + maxItems: 1 + + interrupts: + description: Interrupt on DRDY pin, triggers on falling edge + maxItems: 1 + + label: true + +required: + - compatible + - reg + - avdd-supply + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@1 { + reg = <1>; + compatible = "ti,ads1298"; + label = "ads1298-1-ecg"; + avdd-supply = <®_iso_5v_a>; + clocks = <&clk_ads1298>; + interrupt-parent = <&gpio0>; + interrupts = <78 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <20000000>; + spi-cpha; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml index dddf97b50549..4151f99b42aa 100644 --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml @@ -39,6 +39,17 @@ properties: description: | Channel node of a voltage io-channel. + '#io-channel-cells': + description: + In addition to consuming the measurement services of a voltage + output channel, the voltage divider can act as a provider of + measurement services to other devices. This is particularly + useful in scenarios wherein an ADC has an analog frontend, + such as a voltage divider, and then consuming its raw value + isn't interesting. In this case, the voltage before the divider + is desired. + const: 1 + output-ohms: description: Resistance Rout over which the output voltage is measured. See full-ohms. diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 67de9d4e3a1d..3a470459b965 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -21,6 +21,8 @@ description: | HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf + LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf properties: compatible: @@ -28,16 +30,55 @@ properties: - adi,adrf5740 - adi,hmc425a - adi,hmc540s + - adi,ltc6373 vcc-supply: true ctrl-gpios: description: - Must contain an array of 6 GPIO specifiers, referring to the GPIO pins - connected to the control pins V1-V6. - minItems: 6 + Must contain an array of GPIO specifiers, referring to the GPIO pins + connected to the control pins. + ADRF5740 - 4 GPIO connected to D2-D5 + HMC540S - 4 GPIO connected to V1-V4 + HMC425A - 6 GPIO connected to V1-V6 + LTC6373 - 3 GPIO connected to A0-A2 + minItems: 1 maxItems: 6 +allOf: + - if: + properties: + compatible: + contains: + const: adi,hmc425a + then: + properties: + ctrl-gpios: + minItems: 6 + maxItems: 6 + - if: + properties: + compatible: + contains: + anyOf: + - const: adi,adrf5740 + - const: adi,hmc540s + then: + properties: + ctrl-gpios: + minItems: 4 + maxItems: 4 + - if: + properties: + compatible: + contains: + const: adi,ltc6373 + then: + properties: + ctrl-gpios: + minItems: 3 + maxItems: 3 + required: - compatible - ctrl-gpios diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml new file mode 100644 index 000000000000..2bcf4bbc12e4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2024 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADMFM2000 Dual Microwave Down Converter + +maintainers: + - Kim Seer Paller <kimseer.paller@analog.com> + +description: + Dual microwave down converter module with input RF and LO frequency ranges + from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. + It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down + conversion path. + +properties: + compatible: + enum: + - adi,admfm2000 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a channel of the device. + + additionalProperties: false + + properties: + reg: + description: + The channel number. + minimum: 0 + maximum: 1 + + adi,mixer-mode: + description: + Enable mixer mode for the channel. It downconverts RF between 5 GHz + and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel + is in direct IF mode which bypasses the mixer and downconverts RF + between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz. + type: boolean + + switch-gpios: + description: | + GPIOs to select the RF path for the channel. The same state of CTRL-A + and CTRL-B GPIOs is not permitted. + CTRL-A CTRL-B CH1 Status CH2 Status + 1 0 Direct IF mode Mixer mode + 0 1 Mixer mode Direct IF mode + + items: + - description: CTRL-A GPIO + - description: CTRL-B GPIO + + attenuation-gpios: + description: | + Choice of attenuation: + DSA-V4 DSA-V3 DSA-V2 DSA-V1 DSA-V0 + 1 1 1 1 1 0 dB + 1 1 1 1 0 -1 dB + 1 1 1 0 1 -2 dB + 1 1 0 1 1 -4 dB + 1 0 1 1 1 -8 dB + 0 1 1 1 1 -16 dB + 0 0 0 0 0 -31 dB + + items: + - description: DSA-V0 GPIO + - description: DSA-V1 GPIO + - description: DSA-V2 GPIO + - description: DSA-V3 GPIO + - description: DSA-V4 GPIO + + required: + - reg + - switch-gpios + - attenuation-gpios + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + converter { + compatible = "adi,admfm2000"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>, + <&gpio 2 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>, + <&gpio 22 GPIO_ACTIVE_LOW>, + <&gpio 23 GPIO_ACTIVE_LOW>, + <&gpio 24 GPIO_ACTIVE_LOW>, + <&gpio 25 GPIO_ACTIVE_LOW>; + }; + + channel@1 { + reg = <1>; + adi,mixer-mode; + switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>, + <&gpio 4 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>, + <&gpio 5 GPIO_ACTIVE_LOW>, + <&gpio 6 GPIO_ACTIVE_LOW>, + <&gpio 16 GPIO_ACTIVE_LOW>, + <&gpio 26 GPIO_ACTIVE_LOW>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml index 1414ba9977c1..3c6fe74af0b8 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml @@ -22,6 +22,9 @@ properties: vdd-supply: true vddio-supply: true + spi-max-frequency: + maximum: 10000000 + interrupts: minItems: 1 maxItems: 2 @@ -33,7 +36,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index 79e75a8675cb..e3eca8917517 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -27,6 +27,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml index 7f6d0f9edc75..8b5dedd1a598 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml @@ -43,6 +43,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -51,5 +52,7 @@ examples: compatible = "ti,hdc3021", "ti,hdc3020"; reg = <0x47>; vdd-supply = <&vcc_3v3>; + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index 28b667a9cb76..c48a96d17f51 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -35,7 +35,9 @@ properties: - st,lsm6dsv - st,lsm6dso16is - items: - - const: st,asm330lhhx + - enum: + - st,asm330lhhx + - st,asm330lhhxg1 - const: st,lsm6dsr - items: - const: st,lsm6dstx diff --git a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml index 0e8cd02759b3..062a038aa0ff 100644 --- a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml +++ b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml @@ -4,19 +4,22 @@ $id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor +title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor maintainers: - Christian Eggers <ceggers@arri.de> description: | - XYZ True Color Sensor with I2C Interface + AMS AS73211 XYZ True Color Sensor with I2C Interface https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df + AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface + https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf properties: compatible: enum: - ams,as73211 + - ams,as7331 reg: description: diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml index abee04cd126e..91c318746bf3 100644 --- a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml +++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml @@ -21,6 +21,7 @@ properties: required: - compatible - reg + - vdd-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml new file mode 100644 index 000000000000..b6ab01a6914a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Voltafield AF8133J magnetometer sensor + +maintainers: + - OndÅ™ej Jirman <megi@xff.cz> + +properties: + compatible: + const: voltafield,af8133j + + reg: + maxItems: 1 + + reset-gpios: + description: + A signal for active low reset input of the sensor. (optional; if not + used, software reset over I2C will be used instead) + + avdd-supply: + description: + A regulator that provides AVDD power (Working power, usually 3.3V) to + the sensor. + + dvdd-supply: + description: + A regulator that provides DVDD power (Digital IO power, 1.8V - AVDD) + to the sensor. + + mount-matrix: + description: An optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@1c { + compatible = "voltafield,af8133j"; + reg = <0x1c>; + avdd-supply = <®_dldo1>; + dvdd-supply = <®_dldo1>; + reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml index 65a24ed67b3c..89977b9f01cf 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml @@ -99,6 +99,9 @@ required: - honeywell,transfer-function - honeywell,pressure-triplet +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + additionalProperties: false dependentSchemas: diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml index d9e903fbfd99..6994b30015bd 100644 --- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -8,25 +8,28 @@ title: Honeywell mprls0025pa pressure sensor maintainers: - Andreas Klinger <ak@it-klinger.de> + - Petre Rodan <petre.rodan@subdimension.ro> description: | Honeywell pressure sensor of model mprls0025pa. - This sensor has an I2C and SPI interface. Only the I2C interface is - implemented. + This sensor has an I2C and SPI interface. There are many models with different pressure ranges available. The vendor calls them "mpr series". All of them have the identical programming model and differ in the pressure range, unit and transfer function. - To support different models one need to specify the pressure range as well as - the transfer function. Pressure range needs to be converted from its unit to - pascal. + To support different models one need to specify its pressure triplet as well + as the transfer function. + + For custom silicon chips not covered by the Honeywell MPR series datasheet, + the pressure values can be specified manually via honeywell,pmin-pascal and + honeywell,pmax-pascal. + The minimal range value stands for the minimum pressure and the maximum value + also for the maximum pressure with linear relation inside the range. The transfer function defines the ranges of numerical values delivered by the - sensor. The minimal range value stands for the minimum pressure and the - maximum value also for the maximum pressure with linear relation inside the - range. + sensor. Specifications about the devices can be found at: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ @@ -42,6 +45,10 @@ properties: maxItems: 1 interrupts: + description: + Optional interrupt for indicating End-of-conversion. + If not present, the driver loops for a while until the received status + byte indicates correct measurement. maxItems: 1 reset-gpios: @@ -50,14 +57,6 @@ properties: If not present the device is not reset during the probe. maxItems: 1 - honeywell,pmin-pascal: - description: - Minimum pressure value the sensor can measure in pascal. - - honeywell,pmax-pascal: - description: - Maximum pressure value the sensor can measure in pascal. - honeywell,transfer-function: description: | Transfer function which defines the range of valid values delivered by the @@ -65,19 +64,57 @@ properties: 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494) 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874) 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773) + enum: [1, 2, 3] $ref: /schemas/types.yaml#/definitions/uint32 + honeywell,pressure-triplet: + description: | + Case-sensitive five character string that defines pressure range, unit + and type as part of the device nomenclature. In the unlikely case of a + custom chip, unset and provide pmin-pascal and pmax-pascal instead. + enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG, + 0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG, + 0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG, + 0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG] + $ref: /schemas/types.yaml#/definitions/string + + honeywell,pmin-pascal: + description: + Minimum pressure value the sensor can measure in pascal. + + honeywell,pmax-pascal: + description: + Maximum pressure value the sensor can measure in pascal. + + spi-max-frequency: + maximum: 800000 + vdd-supply: description: provide VDD power to the sensor. required: - compatible - reg - - honeywell,pmin-pascal - - honeywell,pmax-pascal - honeywell,transfer-function - vdd-supply +oneOf: + - required: + - honeywell,pressure-triplet + - required: + - honeywell,pmin-pascal + - honeywell,pmax-pascal + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + - if: + required: + - honeywell,pressure-triplet + then: + properties: + honeywell,pmin-pascal: false + honeywell,pmax-pascal: false + additionalProperties: false examples: @@ -93,10 +130,29 @@ examples: reg = <0x18>; reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; interrupt-parent = <&gpio3>; - interrupts = <21 IRQ_TYPE_EDGE_FALLING>; - honeywell,pmin-pascal = <0>; - honeywell,pmax-pascal = <172369>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0025PA"; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pressure@0 { + compatible = "honeywell,mprls0025pa"; + reg = <0>; + spi-max-frequency = <800000>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <30 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0015PA"; honeywell,transfer-function = <1>; vdd-supply = <&vcc_3v3>; }; }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml index 8c6d7735e875..58aa1542776b 100644 --- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml @@ -24,9 +24,16 @@ properties: reg: maxItems: 1 + vcc-supply: + description: provide VCC power to the sensor. + + label: + description: Unique name to identify which device this is. + required: - compatible - reg + - vcc-supply additionalProperties: false @@ -39,5 +46,6 @@ examples: tmp117@48 { compatible = "ti,tmp117"; reg = <0x48>; + vcc-supply = <&pmic_reg_3v3>; }; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml index 08c1c6b9d7cf..5aaa92a7cef7 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -23,6 +23,9 @@ properties: compatible: enum: + - qcom,msm8909-bimc + - qcom,msm8909-pcnoc + - qcom,msm8909-snoc - qcom,msm8916-bimc - qcom,msm8916-pcnoc - qcom,msm8916-snoc diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index 74ab080249ff..9318b845ec35 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect maintainers: - Georgi Djakov <georgi.djakov@linaro.org> - - Odelu Kukatla <okukatla@codeaurora.org> + - Odelu Kukatla <quic_okukatla@quicinc.com> description: | RPMh interconnect providers support system bandwidth requirements through diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml new file mode 100644 index 000000000000..b565d1a382f6 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm7150-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on SM7150 + +maintainers: + - Danila Tikhonov <danila@jiaxyga.com> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). + + See also:: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h + +allOf: + - $ref: qcom,rpmh-common.yaml# + +properties: + compatible: + enum: + - qcom,sm7150-aggre1-noc + - qcom,sm7150-aggre2-noc + - qcom,sm7150-compute-noc + - qcom,sm7150-config-noc + - qcom,sm7150-dc-noc + - qcom,sm7150-gem-noc + - qcom,sm7150-mc-virt + - qcom,sm7150-mmss-noc + - qcom,sm7150-system-noc + + reg: + maxItems: 1 + +# Child node's properties +patternProperties: + '^interconnect-[0-9]+$': + type: object + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + allOf: + - $ref: qcom,rpmh-common.yaml# + + properties: + compatible: + enum: + - qcom,sm7150-camnoc-virt + + required: + - compatible + + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mc_virt: interconnect@1380000 { + compatible = "qcom,sm7150-mc-virt"; + reg = <0x01380000 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm7150-system-noc"; + reg = <0x01620000 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + camnoc_virt: interconnect-0 { + compatible = "qcom,sm7150-camnoc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml b/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml new file mode 100644 index 000000000000..27e1ac1f252e --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/linux,ubi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unsorted Block Images + +description: | + UBI ("Unsorted Block Images") is a volume management system for raw + flash devices which manages multiple logical volumes on a single + physical flash device and spreads the I/O load (i.e wear-leveling) + across the whole flash chip. + +maintainers: + - Daniel Golle <daniel@makrotopia.org> + +allOf: + - $ref: partition.yaml# + +properties: + compatible: + const: linux,ubi + + volumes: + type: object + description: UBI Volumes + + patternProperties: + "^ubi-volume-.*$": + $ref: /schemas/mtd/partitions/ubi-volume.yaml# + + unevaluatedProperties: false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x100000>; + label = "bootloader"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x1ff00000>; + label = "ubi"; + compatible = "linux,ubi"; + + volumes { + ubi-volume-caldata { + volid = <2>; + volname = "rf"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml new file mode 100644 index 000000000000..19736b26056b --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/ubi-volume.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UBI volume + +description: | + This binding describes a single UBI volume. Volumes can be matches either + by their ID or their name, or both. + +maintainers: + - Daniel Golle <daniel@makrotopia.org> + +properties: + volid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Match UBI volume ID + + volname: + $ref: /schemas/types.yaml#/definitions/string + description: + Match UBI volume ID + + nvmem-layout: + $ref: /schemas/nvmem/layouts/nvmem-layout.yaml# + description: + This container may reference an NVMEM layout parser. + +anyOf: + - required: + - volid + + - required: + - volname + +# This is a generic file other binding inherit from and extend +additionalProperties: true diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml index ac2381e66027..8b3826243ddd 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml @@ -36,20 +36,18 @@ properties: allOf: - if: + properties: + compatible: + contains: + const: mac-base required: [ compatible ] then: - if: - properties: - compatible: - contains: - const: mac-base - then: - properties: - "#nvmem-cell-cells": - description: The first argument is a MAC address offset. - const: 1 - required: - - "#nvmem-cell-cells" + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 + required: + - "#nvmem-cell-cells" required: - reg diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml new file mode 100644 index 000000000000..4009a9a03841 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem-provider.yaml @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/nvmem-provider.yaml# +$schema: http://devicetree.org/meta-schemas/base.yaml# + +title: NVMEM (Non Volatile Memory) Provider + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +select: true + +properties: + '#nvmem-cell-cells': + enum: [0, 1] + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt deleted file mode 100644 index 4881561b3a02..000000000000 --- a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt +++ /dev/null @@ -1,46 +0,0 @@ --------------------------------------------------------------------------- -= Zynq UltraScale+ MPSoC nvmem firmware driver binding = --------------------------------------------------------------------------- -The nvmem_firmware node provides access to the hardware related data -like soc revision, IDCODE... etc, By using the firmware interface. - -Required properties: -- compatible: should be "xlnx,zynqmp-nvmem-fw" - -= Data cells = -Are child nodes of silicon id, bindings of which as described in -bindings/nvmem/nvmem.txt - -------- - Example -------- -firmware { - zynqmp_firmware: zynqmp-firmware { - compatible = "xlnx,zynqmp-firmware"; - method = "smc"; - - nvmem_firmware { - compatible = "xlnx,zynqmp-nvmem-fw"; - #address-cells = <1>; - #size-cells = <1>; - - /* Data cells */ - soc_revision: soc_revision { - reg = <0x0 0x4>; - }; - }; - }; -}; - -= Data consumers = -Are device nodes which consume nvmem data cells. - -For example: - pcap { - ... - - nvmem-cells = <&soc_revision>; - nvmem-cell-names = "soc_revision"; - - ... - }; diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml new file mode 100644 index 000000000000..917c40d5c382 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/xlnx,zynqmp-nvmem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zynq UltraScale+ MPSoC Non Volatile Memory interface + +description: | + The ZynqMP MPSoC provides access to the hardware related data + like SOC revision, IDCODE and specific purpose efuses. + +maintainers: + - Kalyani Akula <kalyani.akula@amd.com> + - Praveen Teja Kundanala <praveen.teja.kundanala@amd.com> + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + const: xlnx,zynqmp-nvmem-fw + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + nvmem { + compatible = "xlnx,zynqmp-nvmem-fw"; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + soc_revision: soc-revision@0 { + reg = <0x0 0x4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml b/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml new file mode 100644 index 000000000000..52a59d245cdb --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/opencores,pwm.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OpenCores PWM controller + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +description: + The OpenCores PTC ip core contains a PWM controller. When operating in PWM + mode, the PTC core generates binary signal with user-programmable low and + high periods. All PTC counters and registers are 32-bit. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - enum: + - starfive,jh7100-pwm + - starfive,jh7110-pwm + - starfive,jh8100-pwm + - const: opencores,pwm-v1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm@12490000 { + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; + reg = <0x12490000 0x10000>; + clocks = <&clkgen 181>; + resets = <&rstgen 109>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 8afb40c67af3..33ae1f786802 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -26,6 +26,7 @@ properties: - enum: - qcom,pm4125-vbus-reg - qcom,pm6150-vbus-reg + - qcom,pmi632-vbus-reg - const: qcom,pm8150b-vbus-reg reg: diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml index 09102dda4942..507f98f73d23 100644 --- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml @@ -47,7 +47,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when @@ -115,7 +115,7 @@ patternProperties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: If present, name (or relative path) of the file within the firmware search path containing the firmware image used when diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml index 884158bccd50..3766d4513b37 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml @@ -18,7 +18,6 @@ properties: const: qcom,glink-rpm label: - $ref: /schemas/types.yaml#/definitions/string description: Name of the edge, used for debugging and identification purposes. The node name will be used if this is not present. diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml index eb868a7ff4cd..ad45fd00ae34 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml @@ -46,7 +46,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml index c054b84fdcd5..66b455d0a8e3 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml @@ -45,7 +45,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml index b6bd33438584..9381c7022ff4 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml @@ -80,7 +80,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: The name of the firmware which should be loaded for this remote processor. diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml index 4744a37b2b5d..45ee9fbe0966 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml @@ -42,7 +42,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml index 028287235912..758adb06c8dd 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml @@ -47,7 +47,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml index f7e40fb166da..c1a3cc308bdb 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml @@ -42,7 +42,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml index 3e4a03eb4532..7286b2baa19f 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml @@ -36,7 +36,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core smd-edge: false diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml index 238c6e5e67c5..d67386c50fa4 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml @@ -46,7 +46,7 @@ properties: smd-edge: false firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml index 53cea8e53a31..4b9fb74fb9e9 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml @@ -47,7 +47,7 @@ properties: description: Reference to the reserved-memory for the Hexagon core firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Firmware name for the Hexagon core required: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml index 58120829fb06..73fda7565cd1 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml @@ -19,6 +19,11 @@ properties: - qcom,sm8550-adsp-pas - qcom,sm8550-cdsp-pas - qcom,sm8550-mpss-pas + - qcom,sm8650-adsp-pas + - qcom,sm8650-cdsp-pas + - qcom,sm8650-mpss-pas + - qcom,x1e80100-adsp-pas + - qcom,x1e80100-cdsp-pas reg: maxItems: 1 @@ -49,6 +54,8 @@ properties: - description: Memory region for main Firmware authentication - description: Memory region for Devicetree Firmware authentication - description: DSM Memory region + - description: DSM Memory region 2 + - description: Memory region for Qlink Logging required: - compatible @@ -63,6 +70,9 @@ allOf: enum: - qcom,sm8550-adsp-pas - qcom,sm8550-cdsp-pas + - qcom,sm8650-adsp-pas + - qcom,x1e80100-adsp-pas + - qcom,x1e80100-cdsp-pas then: properties: interrupts: @@ -71,7 +81,26 @@ allOf: maxItems: 5 memory-region: maxItems: 2 - else: + - if: + properties: + compatible: + enum: + - qcom,sm8650-cdsp-pas + then: + properties: + interrupts: + maxItems: 5 + interrupt-names: + maxItems: 5 + memory-region: + minItems: 3 + maxItems: 3 + - if: + properties: + compatible: + enum: + - qcom,sm8550-mpss-pas + then: properties: interrupts: minItems: 6 @@ -79,12 +108,29 @@ allOf: minItems: 6 memory-region: minItems: 3 + maxItems: 3 + - if: + properties: + compatible: + enum: + - qcom,sm8650-mpss-pas + then: + properties: + interrupts: + minItems: 6 + interrupt-names: + minItems: 6 + memory-region: + minItems: 5 + maxItems: 5 - if: properties: compatible: enum: - qcom,sm8550-adsp-pas + - qcom,sm8650-adsp-pas + - qcom,x1e80100-adsp-pas then: properties: power-domains: @@ -101,6 +147,7 @@ allOf: compatible: enum: - qcom,sm8550-mpss-pas + - qcom,sm8650-mpss-pas then: properties: power-domains: @@ -116,6 +163,8 @@ allOf: compatible: enum: - qcom,sm8550-cdsp-pas + - qcom,sm8650-cdsp-pas + - qcom,x1e80100-cdsp-pas then: properties: power-domains: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml index 45eb42bd3c2c..8e033b22d28c 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml @@ -51,7 +51,7 @@ properties: - const: stop-ack firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Relative firmware image path for the WCNSS core. Defaults to "wcnss.mdt". diff --git a/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml new file mode 100644 index 000000000000..76e1931f0908 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/sophgo,sg2042-reset.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/sophgo,sg2042-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2042 SoC Reset Controller + +maintainers: + - Chen Wang <unicorn_wang@outlook.com> + +properties: + compatible: + const: sophgo,sg2042-reset + + reg: + maxItems: 1 + + "#reset-cells": + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + rstgen: reset-controller@c00 { + compatible = "sophgo,sg2042-reset"; + reg = <0xc00 0xc>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 9d8670c00e3b..d87dd50f1a4b 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -75,6 +75,10 @@ properties: - riscv,sv57 - riscv,none + reg: + description: + The hart ID of this CPU node. + riscv,cbom-block-size: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -106,7 +110,11 @@ properties: const: 1 compatible: - const: riscv,cpu-intc + oneOf: + - items: + - const: andestech,cpu-intc + - const: riscv,cpu-intc + - const: riscv,cpu-intc interrupt-controller: true diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml index 63d81dc895e5..468c646247aa 100644 --- a/Documentation/devicetree/bindings/riscv/extensions.yaml +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml @@ -477,5 +477,12 @@ properties: latency, as ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto. + - const: xandespmu + description: + The Andes Technology performance monitor extension for counter overflow + and privilege mode filtering. For more details, see Counter Related + Registers in the AX45MP datasheet. + https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt deleted file mode 100644 index 2405e35a1bc0..000000000000 --- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt +++ /dev/null @@ -1,31 +0,0 @@ -Abracon ABX80X I2C ultra low power RTC/Alarm chip - -The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, -ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 -is the superset of ab180x. - -Required properties: - - - "compatible": should one of: - "abracon,abx80x" - "abracon,ab0801" - "abracon,ab0803" - "abracon,ab0804" - "abracon,ab0805" - "abracon,ab1801" - "abracon,ab1803" - "abracon,ab1804" - "abracon,ab1805" - "microcrystal,rv1805" - Using "abracon,abx80x" will enable chip autodetection. - - "reg": I2C bus address of the device - -Optional properties: - -The abx804 and abx805 have a trickle charger that is able to charge the -connected battery or supercap. Both the following properties have to be defined -and valid to enable charging: - - - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) - - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output - resistor, the other values are in kOhm. diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml new file mode 100644 index 000000000000..355b0598411a --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Abracon ABX80X I2C ultra low power RTC/Alarm chip + +maintainers: + - linux-rtc@vger.kernel.org + +properties: + compatible: + description: + The wildcard 'abracon,abx80x' may be used to support a mix + of different abracon rtc`s. In this case the driver + must perform auto-detection from ID register. + enum: + - abracon,abx80x + - abracon,ab0801 + - abracon,ab0803 + - abracon,ab0804 + - abracon,ab0805 + - abracon,ab1801 + - abracon,ab1803 + - abracon,ab1804 + - abracon,ab1805 + - microcrystal,rv1805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + abracon,tc-diode: + description: + Trickle-charge diode type. + Required to enable charging backup battery. + + Supported are 'standard' diodes with a 0.6V drop + and 'schottky' diodes with a 0.3V drop. + $ref: /schemas/types.yaml#/definitions/string + enum: + - standard + - schottky + + abracon,tc-resistor: + description: + Trickle-charge resistor value in kOhm. + Required to enable charging backup battery. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 3, 6, 11] + +dependentRequired: + abracon,tc-diode: ["abracon,tc-resistor"] + abracon,tc-resistor: ["abracon,tc-diode"] + +required: + - compatible + - reg + +allOf: + - $ref: rtc.yaml# + - if: + properties: + compatible: + not: + contains: + enum: + - abracon,abx80x + - abracon,ab0804 + - abracon,ab1804 + - abracon,ab0805 + - abracon,ab1805 + then: + properties: + abracon,tc-diode: false + abracon,tc-resistor: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc@69 { + compatible = "abracon,abx80x"; + reg = <0x69>; + abracon,tc-diode = "schottky"; + abracon,tc-resistor = <3>; + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml index b80b85c394ac..a7f6c1d1a08a 100644 --- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml @@ -19,7 +19,9 @@ properties: - items: - const: atmel,at91sam9260-rtt - items: - - const: microchip,sam9x60-rtt + - enum: + - microchip,sam9x60-rtt + - microchip,sam9x7-rtt - const: atmel,at91sam9260-rtt - items: - const: microchip,sama7g5-rtt diff --git a/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml b/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml new file mode 100644 index 000000000000..75624ddf6d4d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/mediatek,mt2712-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT2712 on-SoC RTC + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Ran Bi <ran.bi@mediatek.com> + +properties: + compatible: + const: mediatek,mt2712-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rtc@10011000 { + compatible = "mediatek,mt2712-rtc"; + reg = <0x10011000 0x1000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; + }; diff --git a/Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml b/Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml new file mode 100644 index 000000000000..e74dfc161cfc --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/mediatek,mt7622-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7622 on-SoC RTC + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +properties: + compatible: + items: + - const: mediatek,mt7622-rtc + - const: mediatek,soc-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: rtc + +required: + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rtc@10212800 { + compatible = "mediatek,mt7622-rtc", "mediatek,soc-rtc"; + reg = <0x10212800 0x200>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_RTC>; + clock-names = "rtc"; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt deleted file mode 100644 index c33d87e5e753..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt +++ /dev/null @@ -1,14 +0,0 @@ -Device-Tree bindings for MediaTek SoC based RTC - -Required properties: -- compatible : Should be "mediatek,mt2712-rtc" : for MT2712 SoC -- reg : Specifies base physical address and size of the registers; -- interrupts : Should contain the interrupt for RTC alarm; - -Example: - -rtc: rtc@10011000 { - compatible = "mediatek,mt2712-rtc"; - reg = <0 0x10011000 0 0x1000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; -}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt deleted file mode 100644 index 09fe8f51476f..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt +++ /dev/null @@ -1,21 +0,0 @@ -Device-Tree bindings for MediaTek SoC based RTC - -Required properties: -- compatible : Should be - "mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC -- reg : Specifies base physical address and size of the registers; -- interrupts : Should contain the interrupt for RTC alarm; -- clocks : Specifies list of clock specifiers, corresponding to - entries in clock-names property; -- clock-names : Should contain "rtc" entries - -Example: - -rtc: rtc@10212800 { - compatible = "mediatek,mt7622-rtc", - "mediatek,soc-rtc"; - reg = <0 0x10212800 0 0x200>; - interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_RTC>; - clock-names = "rtc"; -}; diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml index d1f5eb996dba..01cc90fee81e 100644 --- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml @@ -18,7 +18,13 @@ allOf: properties: compatible: - const: xlnx,zynqmp-rtc + oneOf: + - const: xlnx,zynqmp-rtc + - items: + - enum: + - xlnx,versal-rtc + - xlnx,versal-net-rtc + - const: xlnx,zynqmp-rtc reg: maxItems: 1 @@ -48,6 +54,9 @@ properties: default: 0x198233 deprecated: true + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml index e35ad1109efc..2129247d7c81 100644 --- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml +++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml @@ -55,6 +55,7 @@ required: allOf: - $ref: serial.yaml# + - $ref: rs485.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index 3a5b59f5d3e3..3f9ace89dee9 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -30,6 +30,7 @@ properties: - items: - enum: - fsl,imx93-lpuart + - fsl,imx95-lpuart - const: fsl,imx8ulp-lpuart - const: fsl,imx7ulp-lpuart - items: diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index 2046e2dc0a3d..9480ed30915c 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -59,6 +59,7 @@ properties: - renesas,hscif-r8a779a0 # R-Car V3U - renesas,hscif-r8a779f0 # R-Car S4-8 - renesas,hscif-r8a779g0 # R-Car V4H + - renesas,hscif-r8a779h0 # R-Car V4M - const: renesas,rcar-gen4-hscif # R-Car Gen4 - const: renesas,hscif # generic HSCIF compatible UART diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 133259ed3a34..0f0131026911 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -143,6 +143,8 @@ allOf: then: required: - samsung,uart-fifosize + properties: + reg-io-width: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 65804ca274ae..ffc9198ae214 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -88,7 +88,7 @@ properties: TX FIFO threshold configuration (in bytes). patternProperties: - "^(bluetooth|bluetooth-gnss|gnss|gps|mcu)$": + "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$": if: type: object then: diff --git a/Documentation/devicetree/bindings/serial/st,asc.yaml b/Documentation/devicetree/bindings/serial/st,asc.yaml new file mode 100644 index 000000000000..f2083388f36b --- /dev/null +++ b/Documentation/devicetree/bindings/serial/st,asc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/st,asc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STi SoCs Serial Port + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: st,asc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + st,hw-flow-ctrl: + description: When set, enable hardware flow control. + type: boolean + + st,force-m1: + description: When set, force asc to be in Mode-1. This is recommended for + high bit rates above 19.2K. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/stih407-clks.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + serial@9830000 { + compatible = "st,asc"; + reg = <0x9830000 0x2c>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + }; +... diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 1df8ffe95fc6..62f97da1b2fd 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -58,6 +58,9 @@ properties: wakeup-source: true + power-domains: + maxItems: 1 + rx-threshold: description: If value is set to 1, RX FIFO threshold is disabled. diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt deleted file mode 100644 index a1b9b6f3490a..000000000000 --- a/Documentation/devicetree/bindings/serial/st-asc.txt +++ /dev/null @@ -1,18 +0,0 @@ -*st-asc(Serial Port) - -Required properties: -- compatible : Should be "st,asc". -- reg, reg-names, interrupts, interrupt-names : Standard way to define device - resources with names. look in - Documentation/devicetree/bindings/resource-names.txt - -Optional properties: -- st,hw-flow-ctrl bool flag to enable hardware flow control. -- st,force-m1 bool flat to force asc to be in Mode-1 recommended - for high bit rates (above 19.2K) -Example: -serial@fe440000{ - compatible = "st,asc"; - reg = <0xfe440000 0x2c>; - interrupts = <0 209 0>; -}; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index d3f3259ef77d..4310bae6c58e 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -23,6 +23,7 @@ properties: oneOf: - items: - enum: + - qcom,qcm6490-pmic-glink - qcom,sc8180x-pmic-glink - qcom,sc8280xp-pmic-glink - qcom,sm8350-pmic-glink diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml index 7f9d8c7a635a..99a536601cc7 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml @@ -185,11 +185,12 @@ properties: gpio-ranges: items: - - description: A phandle to the CODEC pinctrl node - minimum: 0 - - const: 0 - - const: 0 - - const: 3 + - items: + - description: A phandle to the CODEC pinctrl node + minimum: 0 + - const: 0 + - const: 0 + - const: 3 patternProperties: "-state$": diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml new file mode 100644 index 000000000000..37161d2aa96e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ASoC DPCM USB backend DAI + +maintainers: + - Wesley Cheng <quic_wcheng@quicinc.com> + +description: + The USB port is a supported AFE path on the Q6 DSP. This ASoC DPCM + backend DAI will communicate the required settings to initialize the + XHCI host controller properly for enabling the offloaded audio stream. + Parameters defined under this node will carry settings, which will be + passed along during the QMI stream enable request and configuration of + the XHCI host controller. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - qcom,q6usb + + iommus: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + qcom,usb-audio-intr-idx: + description: + Desired XHCI interrupter number to use. Depending on the audio DSP + on the platform, it will operate on a specific XHCI interrupter. + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 8 + +required: + - compatible + - "#sound-dai-cells" + - qcom,usb-audio-intr-idx + +additionalProperties: false + +examples: + - | + dais { + compatible = "qcom,q6usb"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x180f 0x0>; + qcom,usb-audio-intr-idx = /bits/ 16 <2>; + }; diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index 9b2272a9ec15..6b3aea6d73b0 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -21,6 +21,7 @@ properties: - allwinner,sun50i-a100-ths - allwinner,sun50i-h5-ths - allwinner,sun50i-h6-ths + - allwinner,sun50i-h616-ths clocks: minItems: 1 @@ -50,6 +51,10 @@ properties: nvmem-cell-names: const: calibration + allwinner,sram: + maxItems: 1 + description: phandle to device controlling temperate offset SYS_CFG register + # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": enum: @@ -65,6 +70,7 @@ allOf: - allwinner,sun20i-d1-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h6-ths + - allwinner,sun50i-h616-ths then: properties: @@ -83,6 +89,17 @@ allOf: minItems: 2 - if: + not: + properties: + compatible: + contains: + const: allwinner,sun50i-h616-ths + + then: + properties: + allwinner,sram: false + + - if: properties: compatible: contains: @@ -101,17 +118,12 @@ allOf: const: 1 - if: - properties: - compatible: - contains: - enum: - - allwinner,sun8i-h3-ths - - allwinner,sun8i-r40-ths - - allwinner,sun20i-d1-ths - - allwinner,sun50i-a64-ths - - allwinner,sun50i-a100-ths - - allwinner,sun50i-h5-ths - - allwinner,sun50i-h6-ths + not: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-ths then: required: diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml index 145744027234..d155d6799da6 100644 --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml @@ -33,7 +33,8 @@ properties: description: | The values to be programmed into TTRnCR, as specified by the SoC reference manual. The first cell is TTR0CR, the second is TTR1CR, etc. - maxItems: 4 + minItems: 2 + maxItems: 7 fsl,tmu-calibration: $ref: /schemas/types.yaml#/definitions/uint32-matrix diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index ecf276fd155c..6a81cb6e11bc 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -29,6 +29,7 @@ properties: - renesas,r8a779a0-thermal # R-Car V3U - renesas,r8a779f0-thermal # R-Car S4-8 - renesas,r8a779g0-thermal # R-Car V4H + - renesas,r8a779h0-thermal # R-Car V4M reg: true @@ -90,6 +91,7 @@ else: enum: - renesas,r8a779f0-thermal - renesas,r8a779g0-thermal + - renesas,r8a779h0-thermal then: required: - interrupts diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index dbd52620d293..68398e7e8655 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -228,8 +228,6 @@ patternProperties: additionalProperties: false required: - - polling-delay - - polling-delay-passive - thermal-sensors - trips diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml index dbba780c9b02..da342464d32e 100644 --- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml +++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml @@ -32,12 +32,23 @@ properties: description: | Bit width of the timer, necessary if not 16. + "#pwm-cells": + const: 3 + required: - compatible - reg - - interrupts - clocks +allOf: + - if: + not: + required: + - "#pwm-cells" + then: + required: + - interrupts + additionalProperties: false examples: @@ -50,3 +61,12 @@ examples: clocks = <&cpu_clk 3>; timer-width = <32>; }; + + - | + pwm: pwm@f8002000 { + compatible = "cdns,ttc"; + reg = <0xf8002000 0x1000>; + clocks = <&cpu_clk 3>; + timer-width = <32>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml index 2b9653dafab8..891cca009528 100644 --- a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml +++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml @@ -18,7 +18,9 @@ description: | properties: compatible: - const: nxp,sysctr-timer + enum: + - nxp,imx95-sysctr-timer + - nxp,sysctr-timer reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/ralink,cevt-systick.yaml b/Documentation/devicetree/bindings/timer/ralink,cevt-systick.yaml new file mode 100644 index 000000000000..59d97feddf4e --- /dev/null +++ b/Documentation/devicetree/bindings/timer/ralink,cevt-systick.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/ralink,cevt-systick.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System tick counter present in Ralink family SoCs + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +properties: + compatible: + const: ralink,cevt-systick + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + systick@d00 { + compatible = "ralink,cevt-systick"; + reg = <0xd00 0x10>; + + interrupt-parent = <&cpuintc>; + interrupts = <7>; + }; +... diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml index 7207929e5cd6..8b06a681764e 100644 --- a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml @@ -23,7 +23,7 @@ properties: - enum: - renesas,r7s72100-ostm # RZ/A1H - renesas,r7s9210-ostm # RZ/A2M - - renesas,r9a07g043-ostm # RZ/G2UL + - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five - renesas,r9a07g044-ostm # RZ/G2{L,LC} - renesas,r9a07g054-ostm # RZ/V2L - const: renesas,ostm # Generic diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml index a67e427a9e7e..84bbe15028a1 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml @@ -46,7 +46,19 @@ properties: interrupts: minItems: 2 - maxItems: 3 + items: + - description: Underflow interrupt, channel 0 + - description: Underflow interrupt, channel 1 + - description: Underflow interrupt, channel 2 + - description: Input capture interrupt, channel 2 + + interrupt-names: + minItems: 2 + items: + - const: tuni0 + - const: tuni1 + - const: tuni2 + - const: ticpi2 clocks: maxItems: 1 @@ -100,7 +112,9 @@ examples: reg = <0xffd80000 0x30>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2"; clocks = <&mstp0_clks R8A7779_CLK_TMU0>; clock-names = "fck"; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml index 829bd2227f7c..774b7992a0ca 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml @@ -26,6 +26,7 @@ properties: - items: - enum: - axis,artpec8-mct + - google,gs101-mct - samsung,exynos3250-mct - samsung,exynos5250-mct - samsung,exynos5260-mct @@ -127,6 +128,7 @@ allOf: contains: enum: - axis,artpec8-mct + - google,gs101-mct - samsung,exynos5260-mct - samsung,exynos5420-mct - samsung,exynos5433-mct diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml index e4d893369d57..3f5857aee3b0 100644 --- a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml @@ -23,24 +23,11 @@ properties: connector: type: object $ref: ../connector/usb-connector.yaml - unevaluatedProperties: false - - description: - Properties for usb c connector. properties: compatible: const: usb-c-connector - power-role: true - - data-role: true - - try-power-role: true - - required: - - compatible - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index b7e664f7395b..3b56e0edb1c6 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -313,7 +313,7 @@ properties: usb-phy: description: phandle for the PHY device. Use "phys" instead. - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 deprecated: true fsl,usbphy: diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index f9410eb76a62..8b25b9a01ced 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -27,13 +27,8 @@ properties: vcc-supply: description: power supply (2.7V-5.5V) - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/$defs/port-base @@ -79,6 +74,9 @@ required: - reg - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 87986c45be88..2ed178f16a78 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -77,6 +77,7 @@ properties: - const: usb-ehci - enum: - generic-ehci + - marvell,ac5-ehci - marvell,armada-3700-ehci - marvell,orion-ehci - nuvoton,npcm750-ehci diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index d3b2b666ec2a..88e1607cf053 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -33,13 +33,8 @@ properties: vcc-supply: description: power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/properties/port @@ -54,6 +49,9 @@ required: - orientation-switch - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml new file mode 100644 index 000000000000..f3011694393d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/hisilicon,hi3798mv200-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Hi3798MV200 DWC3 USB SoC controller + +maintainers: + - Yang Xiwen <forbidden405@foxmail.com> + +properties: + compatible: + const: hisilicon,hi3798mv200-dwc3 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + clocks: + items: + - description: Controller bus clock + - description: Controller suspend clock + - description: Controller reference clock + - description: Controller gm clock + - description: Controller gs clock + - description: Controller utmi clock + - description: Controller pipe clock + + clock-names: + items: + - const: bus + - const: suspend + - const: ref + - const: gm + - const: gs + - const: utmi + - const: pipe + + resets: + maxItems: 1 + + reset-names: + const: soft + +patternProperties: + '^usb@[0-9a-f]+$': + $ref: snps,dwc3.yaml# + +required: + - compatible + - ranges + - '#address-cells' + - '#size-cells' + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb { + compatible = "hisilicon,hi3798mv200-dwc3"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>, + <&clk_gm>, + <&clk_gs>, + <&clk_utmi>, + <&clk_pipe>; + clock-names = "bus", "suspend", "ref", "gm", "gs", "utmi", "pipe"; + resets = <&crg 0xb0 12>; + reset-names = "soft"; + + usb@98a0000 { + compatible = "snps,dwc3"; + reg = <0x98a0000 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>; + clock-names = "bus_early", "suspend", "ref"; + phys = <&usb2_phy1_port2>, <&combphy0 0>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + dr_mode = "host"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ite,it5205.yaml b/Documentation/devicetree/bindings/usb/ite,it5205.yaml new file mode 100644 index 000000000000..36ec4251b5f2 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ite,it5205.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ite,it5205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE IT5202 Type-C USB Alternate Mode Passive MUX + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Tianping Fang <tianping.fang@mediatek.com> + +properties: + compatible: + const: ite,it5205 + + reg: + maxItems: 1 + + vcc-supply: + description: Power supply for VCC pin (3.3V) + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ite,ovp-enable: + description: Enable Over Voltage Protection functionality + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the IT5205 to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + - orientation-switch + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@48 { + compatible = "ite,it5205"; + reg = <0x48>; + + mode-switch; + orientation-switch; + + vcc-supply = <&mt6359_vibr_ldo_reg>; + + port { + it5205_usbss_sbu: endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index a59d91243ac8..d4e187c78a0b 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -185,7 +185,10 @@ properties: 2 - used by mt2712 etc, revision 2 with following IPM rule; 101 - used by mt8183, specific 1.01; 102 - used by mt8192, specific 1.02; - enum: [1, 2, 101, 102] + 103 - used by mt8195, IP0, specific 1.03; + 105 - used by mt8195, IP2, specific 1.05; + 106 - used by mt8195, IP3, specific 1.06; + enum: [1, 2, 101, 102, 103, 105, 106] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml index 445183d9d6db..e2a72deae776 100644 --- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -72,8 +72,6 @@ allOf: i2c-bus: false else: $ref: /schemas/usb/usb-device.yaml - required: - - peer-hub additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml index eee548ac1abe..d805dde80796 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml @@ -20,13 +20,8 @@ properties: vdd18-supply: description: Power supply for VDD18 pin - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -49,6 +44,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml index eaedb4cc6b6c..65a8632b4d9e 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: nxp,ptn5110 + items: + - const: nxp,ptn5110 + - const: tcpci reg: maxItems: 1 @@ -41,7 +43,7 @@ examples: #size-cells = <0>; tcpci@50 { - compatible = "nxp,ptn5110"; + compatible = "nxp,ptn5110", "tcpci"; reg = <0x50>; interrupt-parent = <&gpio3>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml index c0201da002f6..589914d22bf2 100644 --- a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml +++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml @@ -21,14 +21,8 @@ properties: description: power supply (1.8V) enable-gpios: true - - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -95,6 +89,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 63d150b216c5..38a3404ec71b 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -102,7 +102,7 @@ properties: description: | Different types of interrupts are used based on HS PHY used on target: - pwr_event: Used for wakeup based on other power events. - - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is hs_phy_irq which is not triggered by default and its functionality is mutually exclusive to that of {dp/dm}_hs_phy_irq and qusb2_phy_irq. diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml index 55df3129a0bc..d9694570c419 100644 --- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml @@ -14,8 +14,19 @@ description: properties: compatible: - enum: - - qcom,pm8150b-typec + oneOf: + - enum: + - qcom,pmi632-typec + - qcom,pm8150b-typec + - items: + - enum: + - qcom,pm6150-typec + - const: qcom,pm8150b-typec + - items: + - enum: + - qcom,pm4125-typec + - const: qcom,pmi632-typec + connector: type: object @@ -24,9 +35,11 @@ properties: reg: description: Type-C port and pdphy SPMI register base offsets + minItems: 1 maxItems: 2 interrupts: + minItems: 8 items: - description: Type-C CC attach notification, VBUS error, tCCDebounce done - description: Type-C VCONN powered @@ -46,6 +59,7 @@ properties: - description: Power Domain Fast Role Swap event interrupt-names: + minItems: 8 items: - const: or-rid-detect-change - const: vpd-detect @@ -81,7 +95,33 @@ required: - interrupts - interrupt-names - vdd-vbus-supply - - vdd-pdphy-supply + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi632-typec + then: + properties: + reg: + maxItems: 1 + interrupts: + maxItems: 8 + interrupt-names: + maxItems: 8 + vdd-pdphy-supply: false + else: + properties: + reg: + maxItems: 2 + interrupts: + minItems: 16 + interrupt-names: + maxItems: 16 + required: + - vdd-pdphy-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml index 7ddfd3313a18..96346723f3e9 100644 --- a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml @@ -35,13 +35,8 @@ properties: vdd-supply: description: USBSS VDD power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -63,6 +58,9 @@ required: - reg - ports +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml index f0784d2e86da..0874fc21f66f 100644 --- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -21,6 +21,12 @@ properties: reg: true + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + vdd-supply: description: phandle to the regulator that provides power to the hub. @@ -30,6 +36,36 @@ properties: description: phandle to the peer hub on the controller. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + 1st downstream facing USB port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + 2nd downstream facing USB port + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + 3rd downstream facing USB port + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + 4th downstream facing USB port + +patternProperties: + '^.*@[1-4]$': + description: The hard wired USB devices + type: object + $ref: /schemas/usb/usb-device.yaml + required: - peer-hub - compatible @@ -50,6 +86,13 @@ examples: reg = <1>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_3_0>; + #address-cells = <1>; + #size-cells = <0>; + /* USB 2.0 device on port 2 */ + device@2 { + compatible = "usb123,4567"; + reg = <2>; + }; }; /* 3.0 hub on port 2 */ @@ -58,5 +101,17 @@ examples: reg = <2>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_2_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + /* Type-A connector on port 4 */ + port@4 { + reg = <4>; + endpoint { + remote-endpoint = <&usb_a0_ss>; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml index fec5651f5602..f6e6d084d1c5 100644 --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml @@ -14,7 +14,10 @@ properties: const: ti,am62-usb reg: - maxItems: 1 + minItems: 1 + items: + - description: USB CFG register space + - description: USB PHY2 register space ranges: true @@ -82,7 +85,8 @@ examples: usbss1: usb@f910000 { compatible = "ti,am62-usb"; - reg = <0x00 0x0f910000 0x00 0x800>; + reg = <0x00 0x0f910000 0x00 0x800>, + <0x00 0x0f918000 0x00 0x400>; clocks = <&k3_clks 162 3>; clock-names = "ref"; ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml new file mode 100644 index 000000000000..8ef117793e11 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI USB8020B USB 3.0 hub controller + +maintainers: + - Macpaul Lin <macpaul.lin@mediatek.com> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb451,8025 + - usb451,8027 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for GRST# pin. + + vdd-supply: + description: + VDD power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml index 6734f4d3aa78..9b3ea23654af 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml @@ -37,10 +37,11 @@ properties: description: Should specify the GPIO detecting a VBus insertion maxItems: 1 - vbus-regulator: - description: Should specify the regulator supplying current drawn from - the VBus line. - $ref: /schemas/types.yaml#/definitions/phandle + vbus-supply: + description: regulator supplying VBUS. It will be enabled and disabled + dynamically in OTG mode. If the regulator is controlled by a + GPIO line, this should be modeled as a regulator-fixed and + referenced by this supply. wakeup-source: description: @@ -65,7 +66,7 @@ examples: vcc-supply = <&hsusb1_vcc_regulator>; reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - vbus-regulator = <&vbus_regulator>; + vbus-supply = <&vbus_regulator>; #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml new file mode 100644 index 000000000000..da76118e73a5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Orientation and Mode Switches Common Properties + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: + Common properties for devices handling USB mode and orientation switching. + +properties: + mode-switch: + description: Possible handler of altmode switching + type: boolean + + orientation-switch: + description: Possible handler of orientation switching + type: boolean + + retimer-switch: + description: Possible handler of SuperSpeed signals retiming + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the device to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + maximum: 8 + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml index 326b14f05d1c..1761b7aa92f0 100644 --- a/Documentation/devicetree/bindings/usb/usb.yaml +++ b/Documentation/devicetree/bindings/usb/usb.yaml @@ -25,6 +25,8 @@ properties: usb-phy: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: List of all the USB PHYs on this HCD to be accepted by the legacy USB Physical Layer subsystem. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 04505cb0b640..b97d298b3eb6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1573,6 +1573,8 @@ patternProperties: description: VoCore Studio "^voipac,.*": description: Voipac Technologies s.r.o. + "^voltafield,.*": + description: Voltafield Technology Corp. "^vot,.*": description: Vision Optical Technology Co., Ltd. "^vscom,.*": diff --git a/Documentation/devicetree/bindings/w1/w1-uart.yaml b/Documentation/devicetree/bindings/w1/w1-uart.yaml new file mode 100644 index 000000000000..bd7c62d780b8 --- /dev/null +++ b/Documentation/devicetree/bindings/w1/w1-uart.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/w1/w1-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UART 1-Wire Bus + +maintainers: + - Christoph Winklhofer <cj.winklhofer@gmail.com> + +description: | + UART 1-wire bus. Utilizes the UART interface via the Serial Device Bus + to create the 1-Wire timing patterns. + + The UART peripheral must support full-duplex and operate in open-drain + mode. The timing patterns are generated by a specific combination of + baud-rate and transmitted byte, which corresponds to a 1-Wire read bit, + write bit or reset pulse. + + The default baud-rate for reset and presence detection is 9600 and for + a 1-Wire read or write operation 115200. In case the actual baud-rate + is different from the requested one, the transmitted byte is adapted + to generate the 1-Wire timing patterns. + + https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html + +properties: + compatible: + const: w1-uart + + reset-bps: + default: 9600 + description: + The baud rate for the 1-Wire reset and presence detect. + + write-0-bps: + default: 115200 + description: + The baud rate for the 1-Wire write-0 cycle. + + write-1-bps: + default: 115200 + description: + The baud rate for the 1-Wire write-1 and read cycle. + +required: + - compatible + +additionalProperties: + type: object + +examples: + - | + serial { + onewire { + compatible = "w1-uart"; + }; + }; |