diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
37 files changed, 502 insertions, 175 deletions
diff --git a/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml new file mode 100644 index 000000000000..7f62ffbdc245 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/xlnx,versal-net-cdx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMD CDX bus controller + +description: | + CDX bus controller for AMD devices is implemented to dynamically + detect CDX bus and devices using the firmware. + The CDX bus manages multiple FPGA based hardware devices, which + can support network, crypto or any other specialized type of + devices. These FPGA based devices can be added/modified dynamically + on run-time. + + All devices on the CDX bus will have a unique streamid (for IOMMU) + and a unique device ID (for MSI) corresponding to a requestor ID + (one to one associated with the device). The streamid and deviceid + are used to configure SMMU and GIC-ITS respectively. + + iommu-map property is used to define the set of stream ids + corresponding to each device and the associated IOMMU. + + The MSI writes are accompanied by sideband data (Device ID). + The msi-map property is used to associate the devices with the + device ID as well as the associated ITS controller. + + rproc property (xlnx,rproc) is used to identify the remote processor + with which APU (Application Processor Unit) interacts to find out + the bus and device configuration. + +maintainers: + - Nipun Gupta <nipun.gupta@amd.com> + - Nikhil Agarwal <nikhil.agarwal@amd.com> + +properties: + compatible: + const: xlnx,versal-net-cdx + + iommu-map: true + + msi-map: true + + xlnx,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the remoteproc_r5 rproc node using which APU interacts + with remote processor. + + ranges: true + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + +required: + - compatible + - iommu-map + - msi-map + - xlnx,rproc + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + cdx { + compatible = "xlnx,versal-net-cdx"; + #address-cells = <1>; + #size-cells = <1>; + /* define map for RIDs 250-259 */ + iommu-map = <250 &smmu 250 10>; + /* define msi map for RIDs 250-259 */ + msi-map = <250 &its 250 10>; + xlnx,rproc = <&remoteproc_r5>; + ranges; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml index c115e2e99bd9..1c7aee5ed3e0 100644 --- a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml @@ -34,9 +34,11 @@ properties: clock-names: const: fck - power-domains: true + power-domains: + maxItems: 1 - resets: true + resets: + maxItems: 1 "#address-cells": const: 1 @@ -51,6 +53,8 @@ required: - reg - clocks - clock-names + - power-domains + - resets - "#address-cells" - "#size-cells" @@ -108,36 +112,30 @@ patternProperties: examples: - | - #include <dt-bindings/clock/r8a7791-clock.h> + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> #include <dt-bindings/power/r8a7791-sysc.h> - soc { - #address-cells = <2>; - #size-cells = <2>; - - adc@e6e54000 { - compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; - reg = <0 0xe6e54000 0 64>; - clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - - pinctrl-0 = <&adc_pins>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - adc@0 { - reg = <0>; - compatible = "maxim,max1162"; - vref-supply = <&vref_max1162>; - }; - - adc@1 { - reg = <1>; - compatible = "maxim,max1162"; - vref-supply = <&vref_max1162>; - }; + + adc@e6e54000 { + compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; + reg = <0xe6e54000 64>; + clocks = <&cpg CPG_MOD 901>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 901>; + + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + reg = <0>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; + }; + + adc@1 { + reg = <1>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml new file mode 100644 index 000000000000..970ccab15e1e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI ADS1100/ADS1000 single channel I2C analog to digital converter + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +description: | + Datasheet at: https://www.ti.com/lit/gpn/ads1100 + +properties: + compatible: + enum: + - ti,ads1100 + - ti,ads1000 + + reg: + maxItems: 1 + + vdd-supply: true + + "#io-channel-cells": + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@49 { + compatible = "ti,ads1100"; + reg = <0x49>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml index 9eb3ecc8bbc8..590ea7936ad7 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -101,6 +101,15 @@ patternProperties: When not configured as a comparator, the GPO will be treated as an output-only GPIO. + drive-strength-microamp: + description: | + For channels configured as digital input, this configures the sink + current. + minimum: 0 + maximum: 1800 + default: 0 + multipleOf: 120 + required: - reg diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index decf022335d8..b39f5217d8ff 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -46,6 +46,9 @@ properties: - items: - const: st,ism330is - const: st,lsm6dso16is + - items: + - const: st,asm330lhb + - const: st,asm330lhh reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml new file mode 100644 index 000000000000..30a109a1bf3b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bu27034.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BU27034 ambient light sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes + capable of detecting a very wide range of illuminance. Typical application + is adjusting LCD and backlight power of TVs and mobile phones. + https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf + +properties: + compatible: + const: rohm,bu27034 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@38 { + compatible = "rohm,bu27034"; + reg = <0x38>; + vdd-supply = <&vdd>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 63885af6a74b..6fda887ee9d4 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -17,6 +17,7 @@ description: | https://www.bosch-sensortec.com/bst/products/all_products/bmp280 https://www.bosch-sensortec.com/bst/products/all_products/bme280 https://www.bosch-sensortec.com/bst/products/all_products/bmp380 + https://www.bosch-sensortec.com/bst/products/all_products/bmp580 properties: compatible: @@ -26,6 +27,7 @@ properties: - bosch,bmp280 - bosch,bme280 - bosch,bmp380 + - bosch,bmp580 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index c6201976378f..1ff3afca9149 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -11,9 +11,6 @@ description: The STMicroelectronics sensor devices are pretty straight-forward what type of sensor it is. Note that whilst this covers many STMicro MEMs sensors, some more complex IMUs need their own bindings. - The STMicroelectronics sensor devices are pretty straight-forward I2C or - SPI devices, all sharing the same device tree descriptions no matter what - type of sensor it is. maintainers: - Denis Ciocca <denis.ciocca@st.com> @@ -48,6 +45,9 @@ properties: - st,lsm330d-accel - st,lsm330dl-accel - st,lsm330dlc-accel + - items: + - const: st,iis328dq + - const: st,h3lis331dl-accel - description: Silan Accelerometers enum: - silan,sc7a20 diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index f44fc32ce87e..dbb85135fd66 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -18,6 +18,28 @@ description: | https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf +$defs: + sensor-node: + type: object + description: Sensor node common constraints + + properties: + reg: + description: + Channel number. Connects the sensor to the channel with this number + of the device. + minimum: 1 + maximum: 20 + + adi,sensor-type: + description: Type of sensor connected to the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - adi,sensor-type + + properties: compatible: oneOf: @@ -64,28 +86,10 @@ properties: const: 0 patternProperties: - "@([0-9a-f]+)$": - type: object - description: Sensor. - - properties: - reg: - description: - Channel number. Connects the sensor to the channel with this number - of the device. - minimum: 1 - maximum: 20 - - adi,sensor-type: - description: Type of sensor connected to the device. - $ref: /schemas/types.yaml#/definitions/uint32 - - required: - - reg - - adi,sensor-type - "^thermocouple@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Thermocouple sensor. properties: @@ -123,7 +127,7 @@ patternProperties: description: Used for digitizing custom thermocouples. See Page 59 of the datasheet. - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/int64-matrix minItems: 3 maxItems: 64 items: @@ -141,7 +145,9 @@ patternProperties: - adi,custom-thermocouple "^diode@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Diode sensor. properties: @@ -184,7 +190,8 @@ patternProperties: default: 0 "^rtd@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: RTD sensor. properties: @@ -282,7 +289,8 @@ patternProperties: - adi,custom-rtd "^thermistor@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: Thermistor sensor. properties: @@ -383,7 +391,8 @@ patternProperties: - adi,custom-thermistor "^adc@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: Direct ADC sensor. properties: @@ -397,7 +406,8 @@ patternProperties: type: boolean "^temp@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: Active analog temperature sensor. properties: @@ -426,7 +436,8 @@ patternProperties: - adi,custom-temp "^rsense@": - type: object + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false description: Sense resistor sensor. properties: diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml index c4f1c69f9330..8c6d7735e875 100644 --- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml @@ -7,9 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI TMP117 - Digital temperature sensor with integrated NV memory description: | - TI TMP117 - Digital temperature sensor with integrated NV memory that supports - I2C interface. - https://www.ti.com/lit/gpn/tmp1 + TI TMP116/117 - Digital temperature sensor with integrated NV memory that + supports I2C interface. + https://www.ti.com/lit/gpn/tmp116 + https://www.ti.com/lit/gpn/tmp117 maintainers: - Puranjay Mohan <puranjay12@gmail.com> @@ -17,6 +18,7 @@ maintainers: properties: compatible: enum: + - ti,tmp116 - ti,tmp117 reg: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 12a0d3ecbabb..5d17bdcfdf70 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -22,14 +22,14 @@ description: | properties: compatible: oneOf: + - const: qcom,msm8998-bwmon # BWMON v4 - items: - enum: - qcom,sc7280-cpu-bwmon - qcom,sc8280xp-cpu-bwmon - - qcom,sdm845-bwmon + - qcom,sdm845-cpu-bwmon - qcom,sm8550-cpu-bwmon - - const: qcom,msm8998-bwmon - - const: qcom,msm8998-bwmon # BWMON v4 + - const: qcom,sdm845-bwmon # BWMON v4, unified register space - items: - enum: - qcom,sc8280xp-llcc-bwmon @@ -49,9 +49,13 @@ properties: type: object reg: - # BWMON v4 (currently described) and BWMON v5 use one register address - # space. BWMON v2 uses two register spaces - not yet described. - maxItems: 1 + # BWMON v5 uses one register address space, v1-v4 use one or two. + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + maxItems: 2 required: - compatible @@ -63,13 +67,36 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + const: qcom,msm8998-bwmon + then: + properties: + reg: + minItems: 2 + + reg-names: + items: + - const: monitor + - const: global + + else: + properties: + reg: + maxItems: 1 + + reg-names: + maxItems: 1 + examples: - | #include <dt-bindings/interconnect/qcom,sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> pmu@1436400 { - compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0x01436400 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml index 576992a6dc5a..9d0a98d77ae9 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml @@ -29,6 +29,7 @@ properties: - enum: - qcom,sc7280-epss-l3 - qcom,sc8280xp-epss-l3 + - qcom,sm6375-cpucp-l3 - qcom,sm8250-epss-l3 - qcom,sm8350-epss-l3 - const: qcom,epss-l3 diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml index 14c170c6a86e..296001e7f498 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml @@ -11,7 +11,7 @@ maintainers: - Maxime Ripard <mripard@kernel.org> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml new file mode 100644 index 000000000000..e49c2754ff55 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/amlogic,meson-gxbb-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson GX eFuse + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + oneOf: + - const: amlogic,meson-gxbb-efuse + - items: + - const: amlogic,meson-gx-efuse + - const: amlogic,meson-gxbb-efuse + + clocks: + maxItems: 1 + + secure-monitor: + description: phandle to the secure-monitor node + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - clocks + - secure-monitor + +unevaluatedProperties: false + +examples: + - | + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clk_efuse>; + #address-cells = <1>; + #size-cells = <1>; + secure-monitor = <&sm>; + + sn: sn@14 { + reg = <0x14 0x10>; + }; + + eth_mac: mac@34 { + reg = <0x34 0x10>; + }; + + bid: bid@46 { + reg = <0x46 0x30>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml new file mode 100644 index 000000000000..84b3dfd21e09 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/amlogic,meson6-efuse.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson6 eFuse + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Martin Blumenstingl <martin.blumenstingl@googlemail.com> + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + enum: + - amlogic,meson6-efuse + - amlogic,meson8-efuse + - amlogic,meson8b-efuse + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: core + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + efuse: efuse@0 { + compatible = "amlogic,meson6-efuse"; + reg = <0x0 0x2000>; + clocks = <&clk_efuse>; + clock-names = "core"; + #address-cells = <1>; + #size-cells = <1>; + + ethernet_mac_address: mac@1b4 { + reg = <0x1b4 0x6>; + }; + + temperature_calib: calib@1f4 { + reg = <0x1f4 0x4>; + }; + }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt deleted file mode 100644 index f7b3ed74db54..000000000000 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ /dev/null @@ -1,48 +0,0 @@ -= Amlogic Meson GX eFuse device tree bindings = - -Required properties: -- compatible: should be "amlogic,meson-gxbb-efuse" -- clocks: phandle to the efuse peripheral clock provided by the - clock controller. -- secure-monitor: phandle to the secure-monitor node - -= Data cells = -Are child nodes of eFuse, bindings of which as described in -bindings/nvmem/nvmem.txt - -Example: - - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc CLKID_EFUSE>; - #address-cells = <1>; - #size-cells = <1>; - secure-monitor = <&sm>; - - sn: sn@14 { - reg = <0x14 0x10>; - }; - - eth_mac: eth_mac@34 { - reg = <0x34 0x10>; - }; - - bid: bid@46 { - reg = <0x46 0x30>; - }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - -= Data consumers = -Are device nodes which consume nvmem data cells. - -For example: - - eth_mac { - ... - nvmem-cells = <ð_mac>; - nvmem-cell-names = "eth_mac"; - }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt deleted file mode 100644 index a3c63954a1a4..000000000000 --- a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt +++ /dev/null @@ -1,22 +0,0 @@ -Amlogic Meson6/Meson8/Meson8b efuse - -Required Properties: -- compatible: depending on the SoC this should be one of: - - "amlogic,meson6-efuse" - - "amlogic,meson8-efuse" - - "amlogic,meson8b-efuse" -- reg: base address and size of the efuse registers -- clocks: a reference to the efuse core gate clock -- clock-names: must be "core" - -All properties and sub-nodes as well as the consumer bindings -defined in nvmem.txt in this directory are also supported. - - -Example: - efuse: nvmem@0 { - compatible = "amlogic,meson8-efuse"; - reg = <0x0 0x2000>; - clocks = <&clkc CLKID_EFUSE>; - clock-names = "core"; - }; diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml index 5ec8f2bdb3a5..e0860b6b85f3 100644 --- a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml +++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml @@ -15,7 +15,7 @@ maintainers: - Sven Peter <sven@svenpeter.dev> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml index 25033de3ef6b..36def7128fca 100644 --- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml +++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml @@ -20,7 +20,7 @@ maintainers: - Rafał Miłecki <rafal@milecki.pl> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml index 3b4e6e94cb81..70fb2ad25103 100644 --- a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml +++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml @@ -14,7 +14,7 @@ description: | unique identifier per part. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml index 7aac1995cfaf..e9d9d8df4811 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml @@ -14,7 +14,7 @@ description: | i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index d0a239d7e199..9876243ff1e8 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -15,7 +15,7 @@ description: | i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml index fe2cd7f1afba..e89fd879c968 100644 --- a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml @@ -10,7 +10,7 @@ maintainers: - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml index 5a0e7671aa3f..714a6538cc7c 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml @@ -61,7 +61,7 @@ properties: type: object additionalProperties: false - platforn-name: + platform-name: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index 75e0a516e59a..d16d42fb98b6 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -15,7 +15,7 @@ maintainers: - Lala Lin <lala.lin@mediatek.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: $nodename: diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml index c3c96fd0baac..a296d348adb4 100644 --- a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml +++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml @@ -15,7 +15,7 @@ description: | settings, chip identifiers) or user specific data could be stored. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml index ff317fd7c15b..8938eec22b52 100644 --- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml @@ -10,7 +10,7 @@ maintainers: - Anson Huang <Anson.Huang@nxp.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml index f93bc50c40d7..6c26800f8b79 100644 --- a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml +++ b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml @@ -17,7 +17,7 @@ maintainers: - Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 2173fe82317d..8d8503dd934b 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -10,7 +10,7 @@ maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: @@ -32,6 +32,8 @@ properties: - qcom,sdm670-qfprom - qcom,sdm845-qfprom - qcom,sm6115-qfprom + - qcom,sm6350-qfprom + - qcom,sm6375-qfprom - qcom,sm8150-qfprom - qcom,sm8250-qfprom - const: qcom,qfprom diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml index e08504ef3b6e..dce0c7d84ce7 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml @@ -15,7 +15,7 @@ description: | to/from the PBUS. allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: @@ -42,17 +42,22 @@ unevaluatedProperties: false examples: - | - sdam_1: nvram@b000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,spmi-sdam"; - reg = <0xb000 0x100>; - ranges = <0 0xb000 0x100>; - - /* Data cells */ - restart_reason: restart@50 { - reg = <0x50 0x1>; - bits = <6 2>; - }; - }; + pmic { + #address-cells = <1>; + #size-cells = <0>; + + sdam_1: nvram@b000 { + compatible = "qcom,spmi-sdam"; + reg = <0xb000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb000 0x100>; + + /* Data cells */ + restart_reason: restart@50 { + reg = <0x50 0x1>; + bits = <6 2>; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml index a4a755dcfc43..38a39c9b8c1c 100644 --- a/Documentation/devicetree/bindings/nvmem/rmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml @@ -10,7 +10,7 @@ maintainers: - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml index febee8129aa9..c5403e149080 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml @@ -10,7 +10,7 @@ maintainers: - Heiko Stuebner <heiko@sntech.de> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml index dc790d2cd9f0..b8bca0599c45 100644 --- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml @@ -11,7 +11,7 @@ maintainers: - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: "#address-cells": true diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml index 172597cc5c63..a69de3e92282 100644 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -16,7 +16,7 @@ maintainers: - Fabrice Gasnier <fabrice.gasnier@foss.st.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml index a7644ebbc2ca..8877c2283e9e 100644 --- a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml @@ -11,7 +11,7 @@ maintainers: - Vincent Shih <vincent.sunplus@gmail.com> allOf: - - $ref: "nvmem.yaml#" + - $ref: nvmem.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml index cbc5c69fd405..36d97fb87865 100644 --- a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml +++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml @@ -50,7 +50,11 @@ properties: ethaddr: type: object - description: Ethernet interface's MAC address + description: Ethernet interfaces base MAC address. + properties: + "#nvmem-cell-cells": + description: The first argument is a MAC address offset. + const: 1 additionalProperties: false @@ -72,6 +76,7 @@ examples: reg = <0x40000 0x10000>; mac: ethaddr { + #nvmem-cell-cells = <1>; }; }; }; diff --git a/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml new file mode 100644 index 000000000000..422becc6e1fa --- /dev/null +++ b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/w1/maxim,ds2482.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim One wire bus master controller + +maintainers: + - Stefan Wahren <stefan.wahren@chargebyte.com> + +description: | + I2C to 1-wire bridges + + https://www.analog.com/media/en/technical-documentation/data-sheets/ds2482-100.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS2482-800.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS2484.pdf + +properties: + compatible: + enum: + - maxim,ds2482 + - maxim,ds2484 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + onewire@18 { + compatible = "maxim,ds2484"; + reg = <0x18>; + }; + }; |